Purchased new 2013. The washer doesnt wash well and the spin cycle is malfunctioned - loud and the nut comes off and must be replaced often. The worst system ever purchased. DO NOT buy this washer!!!

I just finished reading multiple complaints that sound very similar to my experience in 2014. I bought a fridge for a rental unit in Oct. 2013. The freezer malfunctioned and froze up in back, 6/2014. Had multiple repairs with the problem going unfixed. After a couple of months with my renter without a fridge and laborious system requiring multiple phone calls on my part to get an exchange approved. The exchange went thru. It was delivered the am of Sept 11. Guess what? It was dented on the side. The delivery personnel thought is was prior reject and it was an attempt to get me to accept it as is with a small cost reduction off the original purchase price. NO thank you! So still no fridge from Whirlpool as of 9/13/14 that is functioning from Whirlpool and yet to have a call back from Whirlpool regarding the mishap. No apology, no remorse, just the way they do business. I will say that my local HOME DEPOT was willing to send me a loaner fridge for my renter for his garage. NOT ideal but better than nothing and quite nice of them and an example of what customer service should be! Thank You HOME DEPOT! SHAME ON WHIRLPOOL! Not sure how this will end but obviously is common them after reading the reviews. I am now concerned if they do replace it again with an undamaged fridge it will repeat the same dysfunction pattern and I will have to go this painful process all over again! EEEEK. Refrig WRT771REYBOO, VS33469859 BTW I had to pay for spoilage of food for my rent on multiple occasions because the repairs work for a week or so and my renter would stock up the fridge and it would go out and he would lose food. Whirlpool gave me a 50 food spoilage card after much complaining bc go figure the warranty does not cover food spoilage but apparently the extended does. Go figure?

Within six months of moving into our new condo, the microwave started making noises like something was loose - like a fan or something - it would sound as if something was catching and would be quiet and then begin making noise. Mostly noisy but once in a while quiet performance. In talking with adjacent condo owner, he said his had just started making the same noise. Asked some of the other neighbors; many said the same thing. Some had theirs repaired; others were ignoring. We had all moved in within a few months of each other in our Phase of completion.Called Decker and Sons where microwave purchased; they said Too bad. Call Whirlpool direct. I did. Was told I could pay to have repaired through a service company. When I said several residents had been having the same problem and it would seem a recall should be made, I was told that 250 similar complaints had to be received before a recall would be considered. If I could find that many, I should contact Whirlpool. Well, that was obviously not possible. My next door neighbor had his repaired before he sold his unit; the new owner recently said she had just replaced the Whirlpool stove because of the poor oven performance (which I have also experienced even though I ungraded) and microwave due to the noise it made. I have also learned that three other neighbors paid over $100 each to have their microwaves fixed over the last few years. I have just continued to use mine. Today an error message came up but a motor noise continued. Came to my computer to check on Error Message meaning and found this site and registering complaint for an obviously poorly constructed/engineered microwave. Obviously, Whirlpool does not care or listen. I will not buy another Whirlpool appliance! I will do my best to warn anyone purchasing appliances to not buy Whirlpool. Had the company admitted poor quality, no problem, as a production problem can occur but to knowingly disregard and ignore is inexcusable.

I have had my machines for years, and always buy Whirlpool. So far so good, had to replace my washer and dryer approx 11 years ago and still ok no problems yet. Wish I had the money to buy one of those bigger ones someday.

I purchased my Whirlpool French Door Gold Series fridge for $2179.00 in November of 2013. We just had moved into a new house and wanted a fridge that would last a long time. In the past couple weeks the freezer has stopped freezing and after calling Whirlpool I was told I was out of luck and would have to pay full retail price to get the problem fixed. This will be the last Whirlpool product I ever buy.

First, let me say we are so lucky and blessed to get home in time to prevent my home from burning. My Whirlpool range, model 4rf364pxk0, apparently decided to turn itself on (no one home) and grew hotter and hotter. It obviously burned out the thermostat because it was way hotter than cleaning mode. The key pad was melted and sagging inward the control panel warped, heat pouring from it. The racks and interior were glowing orange! My back splash tile blackened and cracked! The oven door locked! Oven hood ruined although it probably saved my cabinets! We hit the breaker! There was so much heat you could feel it on the outside of the exterior wall of the house 30 minutes later! The clean up to my kitchen has been horrible. Black soot and strange greasy film on everything and the stench has been toxic enough to give my husband a raw throat and myself a migraine! Oh and here is the ironic part - my husband was bringing me home from a hospital stay from high blood pressure! It would be almost comic if it wasnt so darn scary! Please, please address this issue before a more tragic story is posted! From looking at this site, it is obvious that there have been other incidence of your stoves turning themselves on and uncontrolled heat. I firmly believe another few minutes and our home would have been engulfed in flames. Now I will spend my weekend shopping for a new ceramic range, hood and tile!

Had washers model # WTW8500DCO repaired after being install for 14 days. Have had washers repaired every 90 plus days because of constant electrical and mechanical failures. Would not ever buying another whirlpool appliance to my worst enemy. Customer service is a total failure. If you ask a question after talking with you for 5-8 minutes and they dont have an answer they start saying HELLO, HELLO? I have to hang up. I cant hear you. Just a really sad business. Stay away!

We bought a Whirlpool washing machine, and what a mistake! I just got off the phone with their customer we dont care department. It spins everything into a tight ball so when the clothes come out of the washing machine everything needs ironed, even permanent press. It also changes the water temperature. I like to wash some clothes in cold water, but the representative at Whirlpool told me it will sometimes add hot water to make the water warm. I am hoping this review will save others from purchasing a Whirlpool washing machine. We will stay clear of all of Whirlpool appliances due to the problem with this washer and Whirlpools lack of concern of an inferior product!

Whirlpool Wash-And-Go washer and dryer - I purchased these new November 2016. Since week two, they have been a constant problem (i.e. not enough water to even get clothes wet, forget about clean; gulping soap from the dispenser; rubbing holes in clothing; putting rust on washed items). The dryer NEVER gets the clothes dry; no matter what setting they always come out damp, even after Ive put them through for two cycles.Three separate repairmen have come to work on the washer replacing sensors and the entire control board. It worked fine for two weeks, now its back to guzzling soap. (It is supposed to do up to 12 loads on one refill of detergent. I get two per refill. Ridiculous! Soap isnt cheap!) And, today it ruined brand new bathroom mats with rust all over them that I had to hand wash to try and remove without much success. At this point I would advise anyone looking for new appliances to try any other major brand and NOT Whirlpool. As soon as I can get the money, these are being junked and Im NEVER buying Whirlpool anything again!

We purchased Model WTW81920758200YW0 on September 8, 2012. Its performance has been unsatisfactory, not cleaning the clothes as advertised. Not long after the warranty expired the main bearing failed, bringing a local service technician and we were left with a bill of over $300.00. Yesterday, the machine stopped in mid-cycle. The display went blank and the lid lock would not release. I called a local service company for a visit and the soonest a repairman could show up was next week.A call to a service we had used for the bearing surmised that without knowing the cause of the failure they could only guess that a circuit board was at fault. That visit would be over $300.00 with labor and materials. That was the last straw. We broke the lid lock to retrieve the contents and took a ride to buy another brand of washer. We went back to the appliance store where we purchased this machine to buy a Samsung front loader. The salesman apologized for selling the Cabrio in the first place. Good money after a bad product.

Purchased the Gold Series Dishwasher Model No: WDF730PAYM0 Serial No: F14403489 on Dec 2011, started using it from Jan 2012. All is good until June 2014. It started leaking from the bottom, called Whirlpool - the great bad company. Since it is not under warranty they asked to schedule an appointment with their local authorized rip off service company. Technician come on the service day and told me that it is $120.00 for the service call and Labor and parts are extra, first of all $120.00 to come to my house is first rip off, that is the reason Whirlpool on their website do not give any estimates on the service call.After checking the appliance he said main assembly is bad and needs to replace and that will cost more than the original purchase price - what a ripoff. He asked me to contact Whirlpool, they may help since this is the known issue with this model. Called Whirlpool and mentioned and they said it is too old to continue to operate so they cannot help. Ended up trashing the 2.5 year old dishwasher for the new GE dishwasher. Never buy a Whirlpool ever again even on sale. Whirlpool company is not ethical and not ready to help consumer, would love to see them close their operation in America.

1.0 out of 5. This is the absolute worst washer that I have ever owned. Do NOT fall for the top loader hype. The clothes do not get clean. Anything black constantly comes out with a white residue and whites are dingy. Ive tried numerous detergents and used as little as a tablespoon and still get the same results. The company just insists that its too much detergent or that I need to run the clean cycle after every 4-5 loads. The service guy that came out said this is the number 1 complaint with these washers and Ive talked to plenty of friends that experience the same issue. The company would have you think this is the first time they have heard of it.I have spent hours on the phone with whirlpool and Home Depot over the past year and neither accept responsibility or offer any solution other than some free cleaning tablets from Whirlpool and Home Depot offered $200 off the purchase of another washer. This was when the washer was only 6 months old. The only way around this is to rewash the clothes and a second cycle and to wash all loads on bulk load with an extra rinse. Yep. Great water savings there! Save yourself the headache and dont buy a top loader of any brand and I would never buy another appliance of any kind from Whirlpool and Home Depot because of their poor customer service in handling this common issue.

The refrigerator is 7 years old and I have already replace parts. The appliance is not made as well as they were made in the past. The inside of the Whirlpool refrigerator is small. The design of putting the soda can dispenser on the door was not a good one. Due to the weight of of the soda in the dispenser is breaking the hinge on the right door or the french door. The rubber gasket is shredding as well.

I paid about $400 for this dishwasher and the regular price was over $600. Got a good deal. It washed dishes wonderfully. All I had to do was scrape the chunks off. It cleaned the rest. BUT... at a certain point, it started NOT cleaning. It was only about 6-7 months old. It was to the point where everything just came out kind of slimy and food grit was re-deposited on the dishes. I cleaned both filters. I made sure there was enough Rinse-Aid all the time. I ran hot water in the sink before starting to make sure the temp was hot enough. My husband went online and someone had instructions about cleaning the water intake because it could sometimes have sediment buildup. Not a difficult process, but there was no gunk in the intake filter. When I listened to a load it seemed like it drained, (most start with that), paused, rinsed for a couple minutes, paused, drained, paused and refilled for the wash cycle. So the pump worked, the arms went round and sprayed. Nothing was in the way of the arms. After it started the wash cycle, it seemed to just stall. It would spray for about a minute and then stop. Im not sure it sprayed after that. The timer kept counting down. It said dishes were clean, but it was an absolute waste of time. I was ready to go buy a cheap dishwasher and throw this one in the dumpster. I think it is a 720 padm??Just after my husband checked the water intake filter, we started another cycle. When it was rinsing, he opened it up and everything seemed to be working ok. It drained, then filled and started the washing cycle and then stopped. He opened it back up and surprise, the water was full on the front level by the float (that turns the water filling off). But in the back of the dishwasher, there was only about an 8th of an inch of water. Online it said the water should fill to just about the top of the heating element. It WASNT. Problem? It wasnt LEVEL. The instructions when installing said it should be leveled. We did when installing it (when it worked great). But looking back, we put in a new hardwood floor about the time it stopped working ok and we didnt put 2 and 2 together. We did not re-level. When we pushed the dishwasher back into its built in cabinet, it must have gotten OUT of level.The rinse part worked I guess. Then it drained and re-filled. After re-leveling the dishwasher, we opened the door at that point. The water was a level depth front to back and side to side. My husband explained what he thought had been the problem to me. When the wash cycle starts it fills, the float shuts off the water at the appropriate level. THEN... the dishwasher starts to pump and fill the arms and the tube up the back that feeds the upper washing arm. So much water goes into the arms and up that tube, the dishwasher looked almost empty of water again. As the dishwasher was now level, it began adding water to compensate for the arm/tube filling. Before the float would shut off too soon because the front part of the tub was full but the back wasnt. Without enough water, the dishes were NEVER going to/COULDNT get clean.The re-leveling made sure that the float didnt turn off the water filling until there was much more water, the CORRECT amount. The next load cycled all the way through, spraying much more than Id heard before and the dishes were clean. P.S. I also got some dishwasher cleaner and used that on a couple empty cycles. I NOW LOVE this dishwasher again. FYI If my husband wasnt handy Id have junked this thing. We HAD leveled the dishwasher when we installed it. Just didnt realize it COULD get un-level just pulling it in and out of the cabinet to install new floors. Check out all the troubleshooting stuff in the manual. But if it doesnt help, put a level inside across the bottom rack, front to back and side to side and make sure the bubble is in the middle of the two lines.The previous dishwasher I had, just made like a fountain of water that went up the middle of the dishwasher into a sort of funnel filling the upper arm. THIS one has that tube up the back and it curls down under the filter and Im guessing it is more sensitive to being OFF LEVEL, because the tube doesnt go straight down, it curls and lays across the bottom of the tub. Without being level, there was never enough water to suck up that tube to start the the actual wash cycle and it just stalled there till the timer said clean at the end. IE: dishes never did wash. BUT IT DOES NOW! Woohooooo!

I bought Whirlpool gas water heater on July 2009. It keeps going out. It is not working. I found out you cant even get parts for fixing it. The dealers told me its junk. I was told to buy a new one. Then, I found out its been in class action lawsuit. How did I get to buy it after it was recalled? I dont know what to do.

In January 2021 I purchased a front load Whirlpool washer and matching dryer. They were delivered on February 6 2021. The first load we found water on the floor. I thought I didnt close the detergent drawer so I proceeded with the next load. Again I found water this even through the ceiling tile in room below. So with the next load I sat in laundry room to see what was happening. When on the rinse cycle water shoots out the front of the dispenser drawer.Contacted service, they sent repair man. He ordered new parts and I waited over 3 weeks for next repair call to find out that whirlpool had part all along. Repair man came again and still no resolution to issue. He was told to order same parts again - still no resolution yet again. I fought with Whirlpool till they said they would give me a new machine. Now fighting because delivery people wont uninstall 1st washer and install new machine. Today is June 28 2021 and I still DONT HAVE A WASHER TO USE. I havent even used the dryer yet. I have $3400 and numerous hours with Whirlpool trying to resolve this issue! Can you help? Whirlpool continues to string us along, telling us to be patient, theyre doing their best.

To Whirlpool Headquarters, Our message to those whom wish to listen is that your product is only as good as the service company you employ to handle service and repairs. Our most recent experience with A&E Factory Service has us convinced we will never buy Whirlpool appliances again. After a two week wait for our scheduled appointment we were dealt a most unprofessional diagnosis as to what may be the problem and then told that to service our appliance would result in overtime and that simply wouldnt be happening at this visit. The appointment time was 12 to 4 PM the repairmen was here at 2:30 pm only for five minutes. We have spoken with a Michael ** with your company who advised us to wait for a call from A&E which no call was ever received. We will be sharing our disgust with Home Depot where we purchased our refrigerator and alerting them to avoid further customer dissatisfaction by no longer promoting Whirlpool in our area. We are level headed and fair people just not able to grasp that a company as big as yours cant do better than this.

Purchased a Cabrio washer wtw5550xwo in Sept. 2010.. Had to replace the pump a little after the warranty ran out. Then recently the control board goes out. Called customer service to complain. This part costs $320 to replace. They told me since it is no longer under the one year warranty they could not help me. This is a major part in less than 5 years of the machines use. I guess I will be purchasing another washer. It will not be a Whirlpool or any company affiliated with them. How sad. I would not recommend Whirlpool to anyone. They just dont make them or stand behind them like they used to.

My Whirlpool has all basic features and works for household jobs. It is extremely useful for routines like towels and clothing. It also works gently enough to launder curtains and goose downquilts. Operations are very simple and the controls make it very simple.

Bought the Duet front loader washer and dryer. Nothing but problems and repairs. When I decided to throw in the towel and buy new machines my repair man convinced me to buy Whirlpool again - Cabrio. Said they are amazing. Love them except the holes in my shirts. I bag my delicates but apparently I have to bag everything. So sorry I bought them. There was a day when you could count on Whirlpool. Replacing my crappy Whirlpool gold refrigerator right now too. Hoping LG will be better. Already replaced my Whirlpool dishwasher. Went to Maytag. This company has gone downhill. My mom had these appliances for 20 plus years - I spend thousands and cant get 5 years!!! Dont buy Whirlpool!

Bought this fridge at Best Buy because it was beautiful and thought it would go perfect in my new home. We allowed the fridge to regulate for 72 hours (even though it only needs 24) and it didnt cool properly or make ice. 3 calls later to the 800 number (along with three scheduled repair visits) and Im getting the run-around. 1st excuse was that I needed to order parts. 2nd excuse was that it was a bad sensor due to the manufacturer. The 3rd excuse was that the fridge door wasnt aligned properly, thus not sealing properly and not allowing the fridge to regulate, which causes it to freeze over. My ice maker also hasnt worked once in this entire ordeal. The issue still isnt resolved and I am vowing to never spend thousands of dollars on this brand again. Spare yourself the headache and go with a less glitzy, more trusted brand.

I have had my stove for 3 years and it works fine. However since I have become a grandparent, I have been extremely worried about the chance of being burnt. the problem is once you turn off the burner, it doesnt look any different than it does when not in use. It stays hot for a very long time however. Hot enough to burn or melt anything. There is no blocking a child from reaching up and touching it. I have placed a loaf of bread near it only to have it melt down the side. The burner didnt look hot at all. This was at least 15 min. after turning off the burner. Im not trying to cause issues but I believe this is a real danger, not only at the risk of someone getting a burn but also to the point of an entire family losing their home or even their lives. A simple flammable item being knocked over could start a fire. I ask that someone look into these risk.

Purchased in January of 2014: Brand new Whirlpool WOS51EC7AS01 model oven - interior bottom metal has buckled causing the enamel to crack and break off from oven bottom. I registered all my new appliances immediately for warranty. When this happened after the fourth or fifth time baking in the oven, I called Whirlpool to get a service person to look at it. First person Whirlpool scheduled to come out refused to even come out, without looking at my oven. He said he knew we did something wrong? They immediately set up a second service person, after two weeks waiting for an answer; I had to call him (twice). He said that his report and pictures sent into Whirlpool shows normal use and there is nothing wrong with our oven? So, Whirlpool will do nothing to repair the oven? We just spent almost $4,000.00 on all new Whirlpool appliances, and this is how we get treated? WOW! Never again will I ever purchase a Whirlpool product. The enamel is gone in spots from our oven floor. How long do they think that will last with no protective coating on the oven? Terrible customer service.

I purchased Whirlpool washer in 12/2011. Immediately, I noticed the noise and called service. It was a whistling noise. The clerk told me nothing was in the manual and it would cost $65 to have a tech come out. He advised me to wait until it was louder and more consistent. I called again when it was. Gear case was replaced on 5/2/2012 five months after purchasing the machine. I called Whirlpool again in 5/2013 - same problem. I was told the diagnostic call would be $95, labor which is extended for a major job is $85 and the part would be $290. It would cost $470 to repair as the gear case was guaranteed for only three months. This machine is a lemon since the gear case is now shot again prior to the machine being 1-1/2 yrs. old. I called Whirlpool and spoke to Amy (Esc. Sup.) who advised they would replace the part only. The appointment was scheduled; the tech came, did diagnostics reading a manual and said the gear case is shot. I inquired, Well, you are going to fix it today right? The reply was, Oh no, it has to be ordered and its a two-man job. When I arranged for this appointment, this was clearly explained and what I was expecting, two men and the part to be replaced with them. Now its a five-day wait to get the part and then a scheduling issue when they could do it. This machine is a lemon and Id like to have the machine replaced or my money refunded. This is a runaround, scheduling the appointment and having someone show up with the manual and having no parts and not knowing that it was the part which broke again from previously being replaced.

What happened to the Whirlpool Corporation that we grew up with? I purchased a Cabrio Washer on 8-29-11. Here it is, 4-24-13 and the transmission is shot. Two loads of clothes were ruined and sensors went bad. All in all, over $500 to repair it. I called the customer service line, what a joke - bad product and worse customer service. Not even and Im sorry. Well it is out from under warranty and when I buy something, I research it first, she said. Wow! Thanks Reena for all your care and concern. I dont know if Ill ever buy Whirlpool again.

The problem started with an error code F3F1 on dryer. Called A & E Factory Service who is company that are certified Whirlpool technicians. They have been out 7 times, March 26, April 1, April 8, April 13, April 27, May 5 and May 12. During those times they ordered and replaced the main control board 3 times and a thermistor for which we paid for parts and labor. The company now says they think we have a lemon and we are supposed to hear back within 48 hours whether we are going to be refunded a total of $504.48 we have advanced for repairs less the service call. They referred us back to Whirlpool and said they would no longer come out as the dryer cannot be repaired! Talked to Whirlpool customer service that says we didnt have an extended warranty and there is nothing they can or will do. This dryer was purchased on 12/31/11. They took the position that because there is no recall for defective parts for this model, there is nothing they will do. Attached is our purchase receipt and all service invoices regarding this matter.

I bought a Whirpool side by side model GSF26C5EXW00 on 4/24 from Lowes in Buford, It was delivered the next day.We followed all the start up directions. You know what a mildewy moldy towel smells like...Well that is what the water and ice smells and taste like coming out of the dispenser. I have had the technician to my house 6 times. the tap water taste good, the water coming out of the line leading to the refrigerator is good. Gee is must be something in the refrigerator! How many times do they have to come out before they actually do something about it? Like replace it or give me my money back.

Whirlpool Cabrio washer and dryer set bought 5/25/2012 - The washing machine started beeping during the drain cycle and I have to reset it. After messing with it for around 30 minutes I can finally get it to drain. Then last night the dyer started making a loud squeal. I called and it is not under warranty anymore, so I have to flip the bill. My last $75.00 set from a church sale lasted 15 years. I paid $1,331 and this is the worst piece of crap I have ever bought. Lowes will not fix the problem when there is 1000s of complaints. I would have never paid this much, if I knew it wasnt going to last!UPDATED ON 05/15/2015: Whirlpool sent out Appliance Hospital to diagnose the problems. The washing machine needs a new tub, seals, circuit boards, drain motor etc and the dryer needs everything + an idler pulley because the original one disintegrated. The part they want me to buy is the same one that already failed. The cost to fix it, is over the amount I paid. REALLY? Somebody needs to do something to help the consumers. Blogging doesnt seem to help. I am handicapped and I have to go to the laundry mat now because I cant afford another set. DONT BUY WHIRLPOOL.

Recently, I was having a problem with my Whirlpool gas range so I contacted the 1-800 number. Long story short, the repair cost was so high I would be better off getting a new range. But believe me, it will not be a Whirlpool.

Purchased Refrigerator (WhirlPool Refrigerator WRX988SIBM03) 16 months ago and noticed the drawer with glass that house the drawers had a crack on the right side. Couldnt believe it was cracked after such little use with just two adults living in the home. Removed it and noticed this was such shoddy design. There is a heavy metal bar in the back with a piece of flimsy plastic that attaches to the heavy metal bar with only a screw attaching the plastic to the metal.I made attempt to glue it since it was only cracked but then the plastic just started crumbling into pieces like a broken cookie. Truly there is something wrong with the quality of the product as well as the design of having this heavy metal bar attached to this flimsy plastic. The quality of this part only leads me to believe what is next with this refrigerator. I am sure there is more to come.I contacted Whirlpool to see if they would replace but of course this is at my cost. Ive had inner parts of refrigerators break over years of use and they get old and busted up over time but this is a new refrigerator and once I inspected the part, I was disappointed with myself for not removing these inner parts and inspecting prior to purchasing. I would have picked up on the poor quality right away. Taken by the outside of this unit and its beauty, and not truly looking at whether or not the shelf can hold a couple gallons of milk. I am here to tell you there is no way this would have withstood the test of time with only a gallon of milk sitting on this unit. Poor design, poor quality and metal attached to raw plastic as it is a disaster.

Whirlpool Cabrio 6600 SW2 - Somehow a coin or two (?) are under the tub. It is not a high pitched sound. Just sounds like the machine is rubbing against the tub or something when it is being used. It does an excellent job of washing and spin drying the clothes, but the noise irritates my wife, which then irritates me. I took the top piece off and can see a coin DOWN there, but cannot reach it. Must I turn the machine upside down and try to shake the coin(s) out?

I had the junky gas water heater for two years and cant keep the thing lit. Calling Whirlpool does no good. They give you the runaround; the store cant do anything. They know they have a faulty product and keep selling it. Some companies are only out for the money. If that wasnt the case, they would discontinue the junk. They will send you replacement parts but if you know nothing about them, you have to put out more money for someone to come and fix it. I would love to send them the bill! I would not recommend this brand of anything to anyone.

I will never, ever, ever buy a Whirlpool appliance again. We bought the french door bottom mount refrigerator in 2013. After our warranty ran out, we had to have the guts of the refrigerator replaced and then the ice maker replaced again. Now the freezer door wont shut and I cannot believe that Whirlpool would put their name on this piece of junk! We splurged to get what we thought was a high end model but it has been problem after problem. RUN from Whirlpool!

In July 2012 we purchased a new Whirlpool Gold refrigerator. Last month ice maker went out. We bought it at Best Buy. They sent out a third party repair co. subcontracted under Geek Squad. Response was same as all these threads - just have to replace it. Since Whirlpool does care why dont we all go after place we purchased these refrigerators or the suggestion of a class action suit works for us! This is absurd!

A couple of years ago, we had 2 natural gas hot water heaters installed. We immediately had a service call to replace the thermostat on one of them. Then recently, the other one had to be replaced because of the leaky tank. It was still in warranty, and we had to pay $425 for the old one to be removed and the new one installed. Now, this one has a bad thermostat and the A & E Factory Service is coming tomorrow to install the new thermostat. We have been inconvenienced by this for a couple of weeks as we have no hot water in the master bath. We were just lucky that we had one hot water heater working in the other part of the house. I think that Whirlpool should have paid the $425 for the installation as the original hot water heater was in warranty. Now, I hope that tomorrows visit will be covered by the warranty. Next time we need an appliance, we will not be purchasing a Whirlpool.

Not enough water to separate/agitate the clothes, so theyre as dirty coming out as going in. We bought an older washer that takes on more water and, presto....clean. We bought new Whirlpool for over $500.00 & sold it for $150.00.

What can I say. Pretty much a generic refrigerator that is manufactured and sold under various brand names. Nothing special. Keeps food cold. Ice maker takes too much freezer space but thats typical. Interior LED lights failed after a few months. Flicker sometimes. Out other times. Internet research finds this to be a common problem. Zero quality in Whirlpool appliances. I bought four Whirlpool kitchen appliances and ALL have had problems. The only way to own them is with a 5 year extended warranty.

Ive had other brands of washers and dryers and I must say I always return to Whirlpool. They are well made and do what they are supposed to. Never had problems. My last set of Whirlpool was about 12 years old. Great product.

Whirlpool Gold Series French door, bottom freezer. - This fridge is beautiful. Thats as far as the pros go for it. The Freon is leaking and cant be repaired because of where the leak is coming from. I can always tell when its time for a recharge because it leaks water profusely when at a low charge (every 4 to 6 weeks). We paid over $1800 for this fridge back in 2013. It has been just over two years and we are now having to replace this fridge. I cant express my frustration at this point. Whirlpool wont do anything to help us. They told me, You are out of warranty, and thats all they have to say. Thats over a thousand dollars a year to own this POS when you consider taxes. Over $1250 a year when you consider the service calls along with it. I will not purchase another Whirlpool product ever again. I am disgusted by this company and their refusal to stand behind their product. They have literally stole money from me and are laughing about it. Do yourself a favor and stay far from Whirlpool.

Two years ago, we purchased a Whirlpool Cabrio Washing Machine from Sears. All of a sudden, it was making sounds in the spin cycle that sounded like a jet airplane taking off. It was terribly loud. We called repair technician, which cost $90, only to find out that the bearing is gone and its going to cost over $500 to fix it. This is absolutely ridiculous! We expected it to last several years, only to find out that we would have to spend almost as much as the washer originally cost in order to fix it. We paid $700 for this machine, two years ago, and I can say that Ive never been more disappointed with a product in my life. My previous washer lasted thirteen years, not to mention my dryer and stove fifteen years, with minimal repairs. I will never buy another Whirlpool appliance again. I have read some other complaints on this consumer affairs website, as well as other sites, regarding this same washer with the same problem on the bearing and cost to repair. If anything, I think Whirlpool should make good on this product and offer something regarding a recall or payment for repair in some form. As far as Im concerned, I will alert everyone I know about Whirlpool appliances and advise them not to purchase it. Now, I either have to pay over $500 to repair my washer or go buy another one. I do not even want this Whirlpool appliance in my house when I can get a washer for cheaper than the cost to repair it.

I purchased a washer and dryer through Best Buy. I had already decided on what I wanted and have purchased Whirlpool appliances in the past including washers and dryers. I tried other brands and was disappointed so I wanted to go back to using Whirlpool w/d. I was encouraged to purchase this set because it was on sale. Worst mistake I ever made. I am so disappointed! I wish I could go back and do over. I would have gladly paid more for what I had wanted instead of saving (supposedly) a little money. I personally think they were trying to get rid of these models because they are awful and I have had so many problems doing a job I already dont but this set makes it worse. The washer is constantly off balance I think because you have to be so strict in how you lay in the laundry to the washer! Now the dryer takes even longer to dry my clothes than my twenty year old set (Maytag) which wasnt that bad. Is there any kind of trade-in I could do model: WTW4900B to get the set I really wanted (the models with glass top on washer and glass door on dryer)? I purchased this in April 19 of 2014. I hate it!

My mom got me and my children a new fridge side-by-side ice maker. We were hoping that since it was new, we would have it for a while, but 1 year and 1 month later, it is not making ice and changes temp for no reason. My fridge will, most of the time, keep cold; but then, there are those days that it doesnt. No one touched the temp, and since its been more than a year, Im stuck. How wonderful to spend all that money for a year and one month! We dont have a working ice maker, and also, I cant keep food good. I cant afford to throw food away. And my mom and I cant afford to get another one.

I first want to begin by saying that we have been a Whirlpool family for years. I now own a Whirlpool microwave, hot water heater, washer/dryer, Jenn-Air stove and dishwasher. My problem now is with the Cabrio Washer purchased in 2008. I started having problems in 2011 and the same problem has raised its ugly head again. When I try to use the Clean cycle, it starts at a 60-minute cycle and goes down to a 2-minute cycle in 3 minutes without cleaning or even running water into the tub. This time, it made a terrible noise and stopped. The tub was replaced in July 2011 after having the same complaint as above. The repairman said that the mechanism on the tub to fit into the spinning cycle is made of plastic and is not holding up. Also, in March 2012, a new control board was installed. I spoke to Whirlpool Customer Service and they informed me that they did not have any other complaints about the Clean cycle and that I should call the repairman. Luckily, I purchased an extended warranty. I vote a thumbs down on the Cabrio washer.

This Whirlpool Duet washing machine is the worst purchase we ever made. The first problem I had was that after delivery, the balancer broke and it had to be returned to the store. 3 months later, my computer board went out. I have to wash twice because my clothes are not clean. 2 months ago, my hardwood floor was almost ruined because water was pouring out the soap dispenser because a sock sucked in the rubber hose and stopped it up. Today, Im unable to use my machine. Whirlpool should recall this machine. It’s too expensive and not worth the money. I do not recommend Whirlpool and will not buy any Whirlpool products again and will replace all Whirlpool products in my home.

Ive got a brand new house, with brand new appliances by Whirlpool. Within less than 6 months, my dishwasher, Model no. DU1015XTXB0 Serial no. F00702058, had its electronic board gone bad. Instead of replacing the dishwasher, Whirlpool replaced the part. Not even one year later the same part went bad. Now, the dishwasher is not even 18 months old and it will cost $255.00 to repair. It is just the two of us in our home and I bought Cascade packets 20ct x 5 at Sams. Im not even done with the packets, so I know 100% that we have run the dishwasher just 70 cycles in 18 months.

Purchased on 04-26, professionally installed on 04-29 into a clean, large, well-ventilated area within the garage. Has turned itself off every day since then. Flashes code 10, screen is dirty... Pull the burner and the screen is clean. Called Whirlpool. They tell me to clean it again, so I do. This goes on for weeks... I can now pull the screen and clean it with my eyes closed. I get up a half hour early every morning to complete my water heater re-lighting procedure so my family can take a warm shower!!! Whirlpool gives me a phone number to a repair company. They tell me the repair person will have parts on the truck. I wait four days, guy comes out and says, You need a control valve.... did they send it to you? So I had to call Whirlpool back and order the valve... three more days... Very next day after repair, the thing shuts itself off again! I call Whirlpool and they try and push me off to the repair company, saying they are now responsible for the repair, but in the same sentence the tech says the heater needs a burner assembly. Okay, so you know it needs a burner assembly, but you ask me to contact the repair company to come out and fix it knowing they DO NOT have the parts on the truck? Only after I change my tone and raise my voice does she offer to send the part ahead of the repair appointment! In my opinion, Whirlpool has reached the top of a list shared by other mega companies like Bank of America and Time Warner Cable... Too bad the accolade is for the worst product and customer service. DO NOT BUY Whirlpool.

Whirlpool Cabrio WTW8500DW0. Like: Top loading, Handsome appearance, clear glass lid, easy access soap dispenser plus separate Oxi dispenser. Dislike: Does not have a soak cycle. We didnt realize until after we replaced our old Sears Calypso what a really poor job it was doing. It damaged the clothes and never really got them clean. Also, the small capacity made it nearly impossible to wash large items such as bedspreads or comforters. The Whirlpool Cabrio WTW8500 has be a delight.

We were looking for stainless steel and this model was that. This model has lots of presets which we like. We lucked out and got it on sale and were able to get features of a more expensive model for a lesser price. The only downside is getting the turntable back in when you clean it. One of the things I wish it had was a way use the timer for foods cooking in the microwave plus use the timer separately for timing food you arent cooking in the microwave, but will be part of the meal. Also, the defrost options could be clearer!

Purchased the Whirlpool Cabrio washer January 2010. Purchased the extended 2 year warranty from Lowes. After about a year I noticed around the bleach dispenser it was starting to rust. Over some time it worsened and grew bigger around all sides. I was unhappy about it, but thought it was just cosmetic and didnt pursue the issue. Now it must be on the inside and has started putting yellow spots on all of our clothes. It was only a towel or two at first and now it is on everything. I called Whirlpool and Lowes customer service center and they are just sorry and will not do anything. Lowes warranty does not cover any rust whatsoever although I cant find that stated on the warranty papers. I will never buy another Whirlpool product, ever. $600 for a washer and $70 for an extended plan to last on 3 years. I know people who have washers for 10 or 15 years. Im so disappointed.

This washer is poorly designed. Less then one year old and always has problems. I dont feel it cleans the closes. Does not always spin them. The load and go is a joke - had a service call because it would lock up - was told load and go does not work and not to use it - the washer was only a few months old. Now it will not even turn on!!!! - All other appliances work in the outlet - it does not respond. I will not even wash by good clothes in it - I take them to my daughters Samsung. I am in my sixtys and this is the worse washer I have ever owned, DO NOT PURCHASE.

About two months ago the washer starting stopping and the UL light continued to come on during every spin cycle. So I would adjust the clothes and start it again. So I decided that I should call a certified serviceman to come out and access the problem. Today a certified serviceman came out to access the problem. After about twenty minutes I was told the tub needed to be replaced and the cost and labor would be $600 or more. I do realize that the washer is about 8 years old but to completely need a repair like a new tub. I am very upset and have no idea what to do.

I purchased model FG1F4040SEPV Whirlpool water heater from Lowes about 5 years ago and have had to literally replace the thermocouple each year. At least 3 of these years we have had to pay someone to fix this for us until we learned to do it on our own. Im very surprised Whirlpool didnt recall these water heaters and make it right for their consumers. What this did for us was confirm that we will never purchase another Whirlpool item ever again. We are switching over to Kenmore!

Purchased microwave 7/3/2016 & paid for installation on 7/9/16. Product started malfunctioned in December. Technician came out 12/30/16 and as of today we still do NOT have microwave. Whirlpool claims they issued credit for microwave & installation. But somehow between safety department & vendor relations with hhgregg they want us to pay AGAIN for installation & haul away on a defective microwave. Hhgregg vendor relations & Whirlpool pointing fingers at each other, we are still without a paid in full microwave. No one cares, and we have been treated poorly by both Whirlpool & hhgregg. Its 3 months without a microwave and Whirlpool doesnt seem to care one bit. Worst customer service Ive ever received.

The wife and I are retired and when it came time to purchase a new washer, we thought we would spend the money and buy top of the line so it would possibly outlast us. So we went to Lowes and spent $1000.00 plus on a Cabrio. Within the first year, the control board went bad, replaced under warranty, now no matter how little or much of a load the wife puts in this piece of crap, it goes off balance!!!Of course as previously stated, customer service doesnt give a crap because we also saw no need for an extended warranty having made such a large investment in a washing machine that we thought was built with a high standard of quality, SHAME ON US, SHAME ON YOU, WHIRLPOOL!!! You have lost a customer who has been buying your products for a long time but will never buy another and will be warning everyone we can to do the same.

Got a simple error code E6 F2 on the display of my oven (only 8 years old). Called Whirlpool to schedule a repair. They told me there were no available dates for one of their techs to fix my unit. They referred me to 3 outside companies that wanted to charge me over $100 just to come out and take a look. One of the phone numbers to the companies they referred me to was a wrong number. I asked them to tell me what the error code means and they said they couldnt tell me with any degree of accuracy. (What use is an error code, then??!!) I checked all over the internet and different websites say it might be a control board (over $300 for the part) issue. But several techs also said that it is a crap shoot and could also be a Temperature Sensor. I called back Whirlpool to see if they could get me a deal on the part. But, guess what? They dont sell it anymore...in fact they dont even sell their own parts at all!! And, they transferred me to some outside company that refused to even give me part numbers, to avoid me shopping for a better deal (which I did end up finding on Amazon after number 6 below). I called back Whirlpool and after getting transferred around to 2-3 different people and wasting about an hour I finally got someone who finally wanted to just give me whatever decent service they could and they finally got me the part numbers of the 2 different control boards (Main Control Unit and Sister board that controls the locking mechanism, $367 and $140 respectively). Now I am faced with paying an Appliance Repair person over $500 for what seems to me is a BIG FAT LEMON of an appliance due to the sheer number of unsatisfied people that are having the same issue, have had it fixed, and had the error just return again. THUS.... WHIRLPOOL AND THEIR CUSTOMER SERVICE AND THEIR PRODUCTS JUST SUCK!! AND I WOULD NOT RECOMMEND THEM TO ANYONE! THE LEAST THEIR COMPANY COULD DO IS TRY TO HELP FIX THE PROBLEM, NOT EXACERBATE IT BY GIVING SHADY CUSTOMER SERVICE AND REFUSING TO HELP FIX THE PROBLEM!!!

I bought a whirlpool 40g gas heater with the Honeywell gas valve. In 5 years Ive had to replace the valve two times. Thankfully the valve was under warranty both times. Our old water heater was Twentynine years old before it started to leak, this new electrical diagnostic high tech gas valve keeps breaking showing a overheated error and the only way to fix it is a new valve that only Honeywell sells thats well over 100$. Talk about a scam!!

I purchased a Whirlpool refrigerator from Gerhard’s Appliance, Glenside, PA on 12/15/2011.There have been problems with the unit since it was delivered on 12/19/2011. The doors were not the same height. There were stains (which looked like rust) on both doors. A shelf on the door and one in the fridge were missing. One of the deliverymen adjusted the door height then, and the door has been creaking on opening/closing since. That door has been replaced, but the problem continues. The freezer (which has an icemaker/water dispenser built in) started to produce ice on the inside of the unit door and on the wall surfaces. Attempts made to rectify the problem were unsuccessful. A new freezer door was ordered. After the door replacement, the frost problem got worse. I can fax you a copy of all service contacts so far (at least 7). Please help me replace this lemon.

18 months ago my husband and I bought our first Whirlpool washer and dryer to go with our first home. 6 months and the dryer stopped spinning. There was an issue with the belt. 12 months later the washer has stopped draining and spinning. It is 2 months since our first filed complaint with our extended warranty company and we still dont have a washer that works. I dont care if I have to take my laundry to the river and beat it with a rock. I will never buy whirlpool again.

Called Whirlpool customer care for help with identifying make and model number of a slide-in, ceramic cook-top range (one of their popular brands). The representative was cordial, patient and very helpful when it came to giving me directions on how to locate make/model information on the unit. That was until I let her know about a recent problem with the stove. The edge of the cooktop is much too sharp! My hand got cut while wiping down the stove top/adjacent counter. Although Ive had the stove for a while, Id never had that happen before; thats probably because I used a thin rag this time around to do the cleaning. I asked the rep if anyone else had reported getting cut by the stove top. She said, No. I let her know that my goal was to just them know about the situation, because such a sharp edge on a cooktop is a safety issue. She disagreed. But what could or should she have said? In all fairness, it came down to balancing loyalty to the company with genuine care for the customer.I do appreciate how kind she was in communicating with me, but am very displeased that once Id shared about the problem she seemed rather dismissive of the situation. How could the risk of being cut NOT be a product safety issue??? If you visit the Consumer Products Safety Commission website, you can see where risk of laceration is a reason some products are recalled. Based on that understanding, I would say that sharp edges on a ceramic cooktop IS a safety issue!

I purchased a Whirlpool washing machine (model: AW01D8810 S silver color) and a Whirlpool refrigerator (model: WBM329 TI) together from United Arab Emirates for Dhs 1999/- & Dhs 1199 /- respectively on 28 Jan. 2011. I sent this machine to my hometown (India) in the same packing and I used the washing machine only for three months and found a complaint. I informed this to service center in Trivandrum, Kerala. Their team came to my home and told me that warranty cannot be given as I purchased machine overseas. They added that the PCB for the machine is having complaint and they dont have stock in India. Also, the machine is no longer available in the factory. The Whirlpool company completely stopped manufacturing the abovementioned model. Again, I came to UAE and contacted GEC group of companies for the PCB part. I got a quotation for PCB Dhs 425/- but the items is ex-stock with them. The machine cost only Dhs 1999/- and if I spend Dh425/- only for PCB, and the machine is with me for the parts since one and half years. I dont know what to do. If I spend another Dhs 600 + this PCB cost then Id rather go for another new branded washing machine. The model of machine is AWO1D8810S and serial no. is 12 nc 859247463000 003. Please advise what to do or if I can find the PCB in Kerala. What will be the cost? I am ready to pay the money for PCB but not for the above rates. Please advise, sir.

We purchased a new Cabrio top loading washer in June of 2011 to replace a Maytag Neptune (thinking at the time that wed gone as low as possible). We didnt abuse the machine. In fact, because it had a tempered glass lid (in a plastic frame), we were careful with the lid on the machine. It broke during a wash cycle. Because its heavy, the lid has spring supports on both sides; these are stronger than the plastic frame and over time the frame will break, rendering the machine inoperable. The discounted price for a new lid is over $200, and Maytag (I mean Whirlpool) tells us that it lasted through the 365 day warranty, so the bill is on us. It may be green when it works, but taking 18 month appliances to the landfill is not very green. And others on the web report say that the lid only lasts a year or so. The ratings scale needs to have negative values. Id give this appliance a -5.

Whirlpool Cabrio Washer and Dryer - The washer does not stay balanced even with a very small load (even though advertised can wash King size comforter). Even with a light load, we have to put the dryer on Heavy Duty or Bulky...and usually have to dry a second time. When attempted to contact Whirlpool, no help available. WORST PRODUCT I HAVE EVER PURCHASED... Would not even want to GIVE this set to a friend or family member. DO NOT PURCHASE THIS PRODUCT.

These are the worst washer and dryer I have had. I had them for 5 yr and have had repairman at my home 14 times. They still are not fixed. The dryer is so loud you cant hear the TV. Washer squeaks, gets off balance.

Whirlpool Dishwasher Model WDT7820PADMO was installed last October. Small parts began detaching themselves from the first day. Then machine leaked onto floor two weeks ago and I shut it down. As it was purchased from Sears, they and Whirlpool have batted responsibility for repairs back and forth until proof of extended warranty was supplied to Whirlpool. They then scheduled a repair job for a week later with an unqualified technician, who naturally refused the job. Upon callback, I was rescheduled for a day two weeks hence. As it turned out, the repairman would not be near my home on the appointment date. Luckily, I tried to move the appointment up, as the repair service said Whirlpool did not supply proof of the extended warranty. I saved five days waiting time by rescheduling, but have to supply proof of extended warranty yet again. All this for a dishwasher that takes three hours per load, and doesnt do a particularly good job of cleaning.

I bought Whirlpool Proton 3-door 18 months ago from a popular store at Chennai. I got a problem with cooling within 2 months. Service was availed and it got better. Same problem occurred again after 3 months of service, so I had it serviced again. Now the problem is its not working at intervals. I called the service and the person could not find any issues and says its working well. While it was pending resolution, the problem recurred and refrigeration is nil now. At the freezer, even after 8 hours, the water has not turned into ice and all food products have perished.

Whirlpool refrigerator are garbage, and their customer service is worse. I will never buy their products again. My refrigerator never worked correctly and destroy all of my food soon after it being delivered.

Always buy an extended warranty if you are going to buy a washing machine. Mine cost $129.00 extra and it is not through Whirlpool. Three control panels and two tub bearings later, the extended warranty insurance carrier gave us our money back to buy another machine. My wife loves the operation of the Cabrio, so we bought a WTW8200YW today, in the false hope that it will work much better. We have an extra washing machine in the garage for the three week period before repairs. The serviceman has to come look to verify the problem, then come back when the part arrives.

We purchased a new refrigerator and dishwasher about three and a half years ago. There are only two of us living in the house and we both work so it is not like we use our dishwasher every day. Dishwasher is Whirlpool Whisper Quiet III Gold model. About three months ago, the panel lights quit working but the dishwasher would still run. Now the blasted thing will not even turn on. Our ice maker freezes up and we are always having to ice pick out the ice and clean out the ice maker. Basically, we never use it because we are tired of the process of cleaning it just to have ice. Now after reading reviews, I do not want to fork out the money to have a repair person come in and fix the dishwasher which most likely will break down somewhere else. Plus the dishwasher tray has a lot of broken tips and are rusty and I have actually had to file a few to keep from getting stabbed by the sharp point. The previous dishwasher worked great and had been in the house for over 15 years. I wish I could remember what brand it was. I only replaced it because I wanted one to match the refrigerator. I am appalled at the quality of the Whirlpool products. I have to get another dishwasher and I have other things that I need to spend my money on rather than a dishwasher. I wont buy another Whirlpool product as of September 13, 2013.

We moved to the mountains of Florissant, CO mid November of 2012. The home we bought needed some renovations. In February of 2013 we bought three Whirlpool appliances from Best Buy before we were ready to. Renovated our kitchen, because they were having a great sale. That was our first mistake. The appliances had to be ordered, and it took a while for all of them to finally come in. We had no idea that it snows up here until almost mid June, and Best Buy wouldnt be able to deliver the appliances until June.We had hired a contractor to renovate the kitchen and had given him half of the money. To make a long story short, he took our money, wouldnt come do the job, but wouldnt give us our money back. Finally did part of the work and never came back again. He sent someone else to do the rest of the job, but he was not licensed, did horrible work that needed to be torn out and be completely redone, yet demanded to be paid for what he did. We ended up in a lawsuit and couldnt hire anybody to finish the kitchen until the lawsuit was settled. By the time the kitchen was finished the refrigerator was already out of warranty.Within days of the refrigerator being plugged up ice began to form at the top back part of the refrigerator. I called Best Buy and over the phone they told me what it was. The refrigerator had been poorly designed. A tube that ran up the back and across the top of the refrigerator to the ice maker created a lot of condensation and was causing ice to form. The Geek Squad representative said that Whirlpool had been aware of the design flaw and had created a kit to fix it. It consisted of insulation, a blower, and maybe a different type of tubing. Anyway, Best Buy said that Whirlpool was responsible for this repair and that it was around $400 and a $100 trip charge, so were talking $500 plus. Since the refrigerator was no longer under warranty with Best Buy I was advised to call Whirlpool since the problem originated in the factory and came like that.I called Whirlpool and they lied and told me there was nothing in their computer system about this design flaw. I called Best Buy back, and they said that Whirlpool had sent something to them about it via the computer and that it was definitely in their system. I called Whirlpool back in July of 2014 and tried to escalate it, but only got the runaround.Now they admit that a recall was done, which had to be in their system, but said that there are two different types of recall. One type is a recall for something that could be dangerous to human life. That type of recall they will take financial responsibility for. Then there is what they call an inconvenience recall. They do not take financial responsibility for anything that falls under that category. For inconvenience recalls, they apparently only contact the companies that have sell their products are contacted, so that they are aware of potential problems that may need to be addressed by their maintenance departments. I feel that a decent, honest responsible company should be willing to take responsibility for things they know were wrong with their product before it ever left their factory or warehouse.Now the freezer isnt working. I called and complained because I thought it was connected to the original problem. All Whirlpool offered to do was to sell me an extended warranty for $319. Its with a company called Assurant, but when you call them they answer as Whirlpool Extended Warranty Program. They told me this would cover the original problem, whatever is wrong with it now, and anything that goes wrong in the next year. I was also promised to not have to put out another dime, so I bought it. Assurant was suppose to set the repair up and pay for it.After almost a week of not hearing from them I called. They informed me that they couldnt find anybody who was qualified to come up here and work on it. I asked them why they didnt call Best Buy. They said it wasnt their policy. I was informed that I was to find someone on my own and have the repairman call them with an explanation of what was wrong with it and the repair cost. If they approved it, then I was to pay for all of the repairs in advance, and they would reimburse me. I had a fit, but they told me that I would either do it that way or the extended warranty would be canceled, and they would just reimburse me the $319 I had paid for the extended warranty.I called Best Buy. They sent a repair man out. He found that the coil at the back of the freezer was covered in a block of ice. He took a blow dryer and thawed it up. He said to put something in the freezer that would freeze it to see if it went back to working properly. He gave us his cell phone number and told us to call him the next day to let him know. In the meantime he was going to contact Whirlpool to see what would have caused that. Well, nothing froze. He called us later and said that Whirlpool had informed him that the coil probably had something that was causing a blockage. It was either a piece of trash that had gotten into the coil at the factory or a bend in the coil, which had to have occurred at the factory; because its inside a closed unit. The repairman said that Best Buy never goes into a closed unit to try to repair it, because they are not qualified, but that if they were it would still cost me a fortune to have that done. He said that Best Buy just replaces the refrigerator, but thats only when its under their warranty. The repair man told me the bill to fix the condensation problem was going to be about $550, and that was before the coil problem was ever discussed. I asked him to call Assurant and tell them everything he told us. He did, and was told there were options to escalate it to the next level. He gave me the phone number. I called it and talked to a representative who told me what the notes in their computer system said. Basically it said to give me my $319 back. Then I was given a phone number to Whirlpool, because I demanded to escalate it.I called the number she gave me. The Whirlpool representative asked me why I hadnt called Sears and offered to call them for me but told me I would be responsible for all the repairs, and that they would not be financially responsible for anything in any way. The guy kept putting me on hold and was apparently getting advice from someone higher in authority.I had already been told that no one in Colorado Springs would go into a closed system to repair that refrigerator, because of the labor and costs. I asked this guy if he just didnt believe the Best Buy repairman or what. There is no telling what Sears will charge me to give me a second opinion. Best Buy has offered to reimburse me for their diagnostic trip up here. If Sears finds the same thing, Im sure they wont reimburse me their trip charge because it didnt come from there.This refrigerator was regularly $2,600. I got it on sale for $2,000 plus sales tax. I cant sell it like it is, I cant get it fixed, and its too big to use as an anchor. In other words, its cost me $2,000 to use this refrigerator for two years, and I have nothing to show for it. You may be saying that I should have bought an extended warranty from Best Buy when I bought it, but that wouldve only taken care of the condensation problem. We wouldve ended up with an unfixable freezer problem anyway. That wouldnt have changed a thing. That extra year warranty would have expired by now.Whirlpool products are inferior, and Whirlpool doesnt take responsibility for their mistakes. They are no better than some of the car companies that have been on the news lately. Take my advice, dont buy Whirlpool products and dont ever be stupid enough to buy their extended warranty. I will never buy another Whirlpool product as long as I live, and if you have any sense, you wont either.

In 2008 bought cheaper Whirlpool washer, had to return it to Lowes. ELLL DUMOH (me) buys yet another Whirlpool Washer from Lowes; a Cabrio. The Cabrio ONLY worked 3 years, and started having problems with not emptying or just continuing to drain and beep. The Whirlpool Customer Service lady is pitiful. Yeah... I can SELL you another set of shock absorbers... that might help. I can SELL you a recirculating pump or a drain pump... Pitiful, sorry attitude. Goodbye Whirlpool.

Just like hundreds (maybe thousands?) of others who have had the same part failure causing the refrigerator to leak, I had it and was told by my very honest, highly reputable repairman (not the one KA recommended!) that it was a DEFECT. I bought a French Door style #4609730. First, I complained on Twitter and the Social Media folks gave me the runaround. I kept it up and then, filed a complain with the Better Biz Bureau. They sent the complaint to Whirlpool, who owns KA. They gave me the runaround too - UNTIL I TOLD THEM HOW MY LOCAL TV NEWS station was interested in my story (true, I went to them too). CORPORATIONS SHOULD NOT GET AWAY WITH DIRTY BIZ TACTICS!

The smell from the washer has gotten so bad we have to keep the door closed to our laundry room, or the smell will permeate the whole front part of the house, as it is we have to keep the door to garage which is adjacent to laundry room open to air out laundry room. Our friends and guests, are aways telling us we have water leak or something mildewing, or rotting in our house. The washer works well, and I cant find any buildup. We frequently run it through clean washer cycle, it smells OK for a hour or two, and odor returns!

I updated appliances in new house, but didnt realize the builder would choose the smaller side by side frigidaire. Could use a larger freezer space, also would like a ice maker that cut off when bucket is full. Overall I love Whirlpool appliances.

I purchased (from Lowes) a Whirlpool water heater in 2010 unaware of the recall and problems a lot of customers were experiencing. I have changed (6) thermocouples the most recent yesterday 2-10-2014. The heater still does not work. Is there any compensation I can receive at this date. If Lowes were aware of the problems with the heaters, how can they still in honest sell these water heaters to the public.

August 10 2014, I purchase a new Whirlpool HE. Monday cant wait for the delivery of my new washer! Im ready with my HE detergent & 2 loads of dirty laundry. Tuesday, I want my broken old Kenmore washer back! My kids clothes came out dingy. Did a second rinse & spin but didnt help. Second batch had to be rewashed. Some areas were not even wet. Had to pause it to add more water to & again to rinse it. Plus I had to mix my softener into a cup of water to add it on rinse because I forgot the rinse ball, unlike the old washer where I add into dispenser & forget about it. So unhappy & dissatisfied.

When I first purchased the dishwasher I had to call Whirlpool to come out because although I was using a drying agent as Cascade, the dishwasher lower door remained wet causing water onto the utensils. Whirlpool came out and said it would take a few washes until the inner part of the D/W would acclimate to the drying agent. Well the lower door where the utensils basket sits does not dry in its entirety so its a defect, not the drying agent. Also, the decibel 55 is quite loud we cant run the dishwasher during the day, its too noisy and distracting.

New stainless steel range 5.3 cu.ft. with convection oven delivered by Home Depot on time. Before the day was over the trim around oven glass was falling off. Double sided sticky tape was not holding. Yes its put on using double sided sticky tape. Called Home Depot, once you accept it, you deal with Whirlpool. They must first send someone to look and see. Yes its falling apart. Service tech will order new door. Mind you it will also have the sticky tape. We have also noticed that the glass top has many deep scratches, he will replace that also. A week later still no word, when. Used the oven because I couldnt wait and as it heated up smoke poured out of it and a loud noise from inside. Turned off and pulled out bottom drawer to unplug. Bottom panel had fallen down and undersides were rusted. Only had the stove 3 weeks and its Christmas Eve. Will read reviews first next time. No problems with my other Whirlpool appliances.

The Cabrio model (WTW5640XWO) I purchased in March 2011 died within days of installation. I was given instructions to modify the hose placement which resulted in a flooded basement and ruined carpet. Problems continued during the first year; several service calls. The problem was always the same; it did not drain/spin leaving a mess of soggy wet clothes. It died a final death - the same problem a few months after the 1-year warranty expired. The repair people have been out four times since. The last time, a $70 repair lasted less than 3 weeks for a bad shifter - always the same problem. Whirlpool will do nothing except offer to send a repair team out for a flat fee of an additional $120 with no guarantee they would fix the problem or replace the lemon. This week this Cabrio will be heading to the landfill. Ive had enough. No more Whirlpool products for me ever.

Very unreliable oven. Oven temperature never seems to get to the proper setting. Do not buy any Whirlpool appliance. They do not stand behind their product. A stove should be relatively simple but Whirlpool managed to produce a product that is complicated & unreliable.

Despite always using the designated (he) detergents and trying many different brands in appropriate amounts, this washer always leaves an ugly white residue on clothes. This happens all the time, requiring whole loads of clothes to be rewashed, sometimes more than once. This defeats the whole purpose of conserving water, which is reflected in our water bill. We also placed the laundry room on the second floor to make it easier for me with my disabilities. I am constantly having to climb the stairs when the machine gets unbalanced in addition to the extra loads from the residue. I was very excited to purchase this machine. Unfortunately, these feelings didnt last long.

Brand new dishwasher never worked. After getting the runaround from Bethel Park Home Depot. I was told I had to call Whirlpool. After being on hold 3 separate times for more than 12 minutes each time, they scheduled a repairman in a weeks time. He said the motor was bad and had to order. Wont be back out until after Christmas. I asked Whirlpool to replace this lemon. Customer service told me they never replace if they can fix. What if something else is wrong? They didnt care. Very rude. Told me manager would tell me the same thing. Never buy Whirlpool. Appliances are faulty and customer service rude. This has been a nightmare experience. Feeling very helpless at this point.

I bought my home four years ago with a Whirlpool 50-gallon water heater in it. It was installed in December 2002. Well, my hot water went out. After being told I could go to Lowe’s because they would supply the part free of charge because there was a recall on the thermocouple unit. I went to Lowes. No luck there. They told me they didnt carry the whole replacement unit and I would need a number from Whirlpool. The guy at Lowes was very nice but said I was the fifth person to come in this week.I called Whirlpool and was told because I was not the homeowner that had purchased the item that there was no warranty on the product and that I would have to pay for the part. It cost $34.98 plus shipping, which was another $30.00 because I had it shipped overnight. Two days with no hot water was enough. Well, I got the part and hopefully there is nothing wrong with it as it was shipped in a box twice as big as needed with no packing what so ever.I just got off the phone with them again but this time spoke with a supervisor that told me there was no need for packing. There was no part of the entire assembly that could have been damaged. Will I ever buy anything with the Whirlpool name on it? Not only no, but ** no! Will I tell everyone I know about this? You bet. I am also going to write to Lowes and ask why they are continuing to sell inferior appliances such as these. I have to tell one realtor friend about this and just placed a call to another to tell him. The first had no idea that appliances that were marked still under warranty did in fact have no warranty at all if its a Whirlpool. I may write a letter to the editor of our local newspaper and hope that they will publish it to inform anyone reading the paper about these inferior products.

The washer is only a couple of years old. It does the job but its not something wonderful or great. The previous one was a Kenmore but it was built by Whirlpool. It works. Thats all I can say about it.

So I had a problem with the water heater after 2 years and had the sensor fix by my heating people. Now the water heater is 3 years old and started leaking from the top of the water heater. Called my heating people and they fix the pipe and coupling on top but he told me the water was still bubbling up at the top. He told me it could stop and 70% it would be ok. Went to check on it and it continues to leak so I called Whirlpool because it was still under warranty. They are the most horrible people to deal with. First of all I told the guy it was leaking from the top but he asked me if it was leaking out of the side pipe. Didnt know what he was talking about and he kept sighing on the phone. If I knew about water heaters I wouldnt be calling them. After all the questions it came down to it was leaking where I told him at the top. He gave me a number and told me to take the water heater back to Lowes and get a new one and then call them and they would move the warranty over to the new heater. Really???? We are not talking about clothes you want to bring back to a store. Asked him how I should do this and he told me to call a heating contractor. So does he think that the heating contractor and going to run the water heater back for a new one??? In the end I just called my heating people and they are going to send somebody out to install a new heater. So much for Whirlpools warranty. If this is under warranty and it is exclusive to Lowes then they should be having Lowes bring a new one and install it.

This complaint refers to model number ET8MHKXMB. It was purchased in November of 2008 and the fan had to be replaced on May 29, 2012. The cost of this repair was $189.79. This is a terrible thing to have happened. Obviously, the fan was made cheaply. We are very dissatisfied and will not purchase another Whirlpool refrigerator ever!

I purchased a refrigerator Model# WRF736SDAW12 on 8/9/14 and from day two, Ive had nothing but problems with the ice maker. We NEVER use crushed ice, but we get a lot of crushed along with cubed and crushed/shards of ice all over my fridge, hands and floor. My daughter (wearing her heels) already slipped and fell while walking past the fridge, not realizing that there was ice lying on the floor because my floor is light/multicolored, so we cant see the ice.After several calls, the repair person replaced all the components of the ice maker and the repair person was told (2/26/15) from the Whirlpool tech that we would just have to live with the problem because its normal and he was advised to tell me to get a larger glass. The repair person looked at my glass, seeing that it was already large, shook his head and said Whirlpool must want me to start using a bowl to catch all the ice. I couldnt believe it?! I bought this fridge expecting to receive ONLY cubed ice and yet I dont, so Im sure why they put that cubed feature on there when I cant utilize it. I only want a little ice, but the first thing that comes out is the crushed ice, and in order for me to receive more cubed ice, I have to fill up the entire cup that includes the crushed/shards of ice which floats to the top and ends up in my mouth. Thats the purpose of me selecting cubed, so I dont have to drink it!After the repair man left, I called customer service (2/26/15) and she told me that ice gets stuck in the chute?, so thats why I get crushed ice, but its normal she says. How is that normal? Please read all the reviews/complaints from both the Whirlpools and on Home Depots website for this model and you’ll see this is a problem, there is a flaw in the design.I cant believe a big company such as Whirlpool would treat me so poorly and brush me off like this. After the many posts I put on their Facebook page, they over and over say they will be in contact with me. I have yet to hear from them. I found another story on Pissed Consumer where a senior fell due to the ice falling all over the floor, so its not just me that it has happened to. Theyre putting people in a hazardous situation and they dont care.I have an autistic son who gets ice constantly, I can’t supervise his every move and I’m not able to keep up with his dropped ice nor can he remember to look down for it. I’m concerned that next time my daughter falls; she won’t be so lucky and could sprain or break something. How about my visitors? Do I worry about them suing me when they fall? I’m not so annoyed at the fact that I step on water with my dry socks or the 24/7 noise from the motor or the left door not shutting all the way than I am with the safety of my family.

I bought my refrigerator model #WRV986FDEM, in October. It has not made ice in over a month. I think its very unfair to purchase a product and not be able to use it. The technician has been out here twice and the situation is still not resolved. I understand that customer service is not a strong suit of your company but I am not a customer to be taken lightly. I paid almost three thousand dollars for this piece of junk and I want it to work properly. I find it unacceptable that the technician just left and the situation is not resolved. I will be posting my displeasure on every site I can today since I had to take yet another day off to accommodate you and your inferior product. ALL I WANT IS ICE from a fridge I bought 4 months ago. In the words of our illustrious president. Very, Very BAD.

I purchased new appliances almost 1year ago to the date. I bought the glass top range with. convection oven. In convection mode, the fan cuts on and off intermittently during bake cycle. Friends who also have the same oven say their fan runs consistently in convection mode. Repairman came out and changed fan and control panel. Still runs intermittently. Apparently that is a feature of “some models”. Had I known it was not continuous convection, I would have purchased a less expensive model without convection feature. It takes longer to cook in that mode.

Have owned my Whirlpool washer model# LSR 701 0PQ1 two years and had no problems with it before today... The washer was used once a week since I purchased it and only myself use it. There is only myself and my son and our loads are always small. Well today I put a load in and went to finish my other housework and when I went to check on the load, there was a weird smell in my laundry room. As I approach the washer to put softener in the rinse I saw a flash behind on the left hand side of the control panel where the size of load and water temperature selection is. I unplugged the washer and put the fire out. Have never had anything happen like this before with this brand. I already know I have to buy another washer but am scared to get another Whirlpool.

The dishwasher is quiet and seems to clean most all of the dishes even when there is dried on food remnants. Multiple cycles that allow for light, medium and heavy cleaning. Also the ability for air dry and minimum use of water. The size is appropriate for normal amount of dishes, pots, pans, etc. Stainless steel front with most of the controls hidden. I have always had good luck with Whirlpool products, with this dishwasher continuing with being a quality product for the amount of money spent.

I purchased a Whirlpool oven and stove from hhgregg. The refrigerator is at best OK. The stovetop is easily scratched and looks horrendous after just a few months. Cooking controls are far too high for slow cooking. Customer service is terrible. Avoid, purchase another brand. You will be much more satisfied.

When I first bought this machine I loved the big tub, but I was concerned that there was no agitator. It confuses me how clothes can get clean if there is nothing to rub them again. Even in the olden days they rub clothes against a board. Well my concern is valid and I believe the washing machine industry needs to go back to the old model, as this new version does not work.Here are all the problems: 1) The machine judges how much water to put in. This doesnt work. I follow the directions and outline the perimeter and dont overload, yet still it just barely puts in enough water to make the clothes wet. Im all for conserving the environment, but enough water needs to be provided to actually get the clothes clean. I would like to be the judge of how much water should be used, so I would like to be able to tell the machine if it is a small, medium or large load. I do believe that the lack of enough water is why the clothes do not come out as clean as they should and why they end up smelling (see #4). 2) There is no agitator, so there is really nothing available to help clean the clothes. Spinning them around like a maniac is not enough, which leads me to the next problem. 3) The clothes come out twisted terribly and then many times come out of the dryer wrinkled because of how hard they were twisted. I tried to select a less harsh spin cycle, but then the clothes are too wet to put in the dryer. There is no happy medium.4) Biggest problem to date: Our clothes/towels have all started smelling. You know that smell when you leave your clothes in the washer too long (like two days) and then put them in the dryer? Its that smell. The clothes/towels dont smell when you immediately take them out, but they do smell at any bit of moisture. When I dry myself off after the shower, I notice the newly washed bath towel smells like a wet dog. I have used the pods, liquid detergent and powder. I dont remember having the smell problem when I first bought the machine and used powder, so I just returned to using powder today. (Ive even tried doubling up on the pods, but the clothes still smell.)This leads me to problem number 5: When using powder in this machine, the machine does not empty the powder container completely, and so the clothes do not get the required amount of detergent. Often there are clumps left over in the powder dispenser, but not always. (This is what led me to go to the pods and liquid detergent in the first place.) But at least with powder (I use Gain) my towels dont stink after the first time I used them.I wouldnt recommend this machine. I really researched machines before I purchased this one, but they all had bad reviews, so how do you pick? And I never look at the good reviews because we all know so many people are paid to rave about products they know nothing about, or it is a company employee writing the review. This machine is a huge disappointment. I am going to try adding a rinse cycle like a previous reviewer suggested. Maybe the extra water will help with the smell. Of course this is not good for the environment though, so this whole way of making washing machines with no agitator and limiting water defeats the energy efficient goal.

We installed this furnace along with a matching 4ton a/c unit over four years ago. It was installed with a 3 zone computer controlled damper system to separately condition the three floors of our home. This furnace was ideal because it has a dual stage combustion chamber depending on how much demand there is. So besides being 95% efficient, the furnace can run at 70% or 100% heating capacity which saves on utility bills when the whole house doesn't need heat at the same time. It also had a variable speed blower which made start ups and shut downs almost unnoticeable. The blower actually ramps up to speed discreetly and adjusts itself according to the amount of back-pressure it senses. This allows it to respond to varying conditions as each of the 3 thermostats are calling for heating or cooling at different times. And yes here in St. Louis we have had days that require heat on the first floor and a/c on the third floor at the same time. The controller cycles between the two every 15 mintutes. All of these features make it ideal for our 2200sq ft three story brick home(four including the basement where it is installed). This furnace and control system along with new ductwork and dampers were able to replace the two old furnaces and a/c units originally in the home. We haven't had a single problem with it in over four years and would recommend Whirlpool Gold products to anyone I know. If I ever had to do this again in another house I would do exactly the same thing with exactly the same products.

We have had a Whirlpool dishwasher for about 2.5 years and have been happy with how it cleans dishes. About a year ago we replaced our counter top and in the process had to adjust the bend in the mountain brackets that attach the dishwasher to the underside of the counter. This requires flexing the thin piece of aluminum at the perforated line. In the process, one of the brackets snapped. The other was barely still intact and broke several months later. I tried jerry-rigging them, but eventually decided to replace them and called Whirlpool customer service to ask for replacement parts.Unfortunately, Whirlpool wanted to charge me $10.50 apiece and another $9.00 for shipping and handling. These parts could not cost more than a few cents apiece. I was shocked that they would charge me $30.00 to replace these flawed parts. Never have I had such and experience with any customer service department. The three people I spoke with were all rude and unapologetic about my situation. Two blamed it on the install...Ive installed plenty of dishwashers and never had any problems in the past. Even if it was a failure on my behalf, the simple replacement of the parts for a reasonable charge would have been fine by me. I told them Id be happy to pay a few dollars and to pay the full shipping fee (which was also high, in my opinion), but they refused to meet me halfway. I can only think that this is part of their business plan...make dishwashers with sub-par parts, and then over charge for the replacement parts when they fail. Well, I re-upped my jerry-rigging efforts and have improved the engineering of the faulty part. Save my $30. But Whirlpool will never again get my business and Ill be sure to steer clients and friends away from this brand as well.

I purchased a Whirlpool water heater on 9/30/2011. It is leaking at the point of cold water entry and is spewing a brown colored watery substance, leaking on the floor.

Extremely disappointed!! We purchased this water heater about 4 years ago and for the past year we have to manually turn on the burner. Its been a nightmare! We called Lowes to purchase the parts, but they do not sell the parts. There was a nine year warranty. Our last water heater lasted about 11 years. Its such a shame that this one is giving us problems just after 3 years. Im really considering just buying another one. I dont want to continue struggling with this one. Its been a bad purchase and coming to find out that Im not the only one with this problem. If its a defect Whirlpool should at least replace them for the inconvenience. They should take responsibility for selling defective products.

Very pleased with my Whirlpool dishwasher. It is not the top of the line but does a great job of cleaning my dishes and is very quiet when running. Whirlpool appliances have been very good to me.

In open concept homes, manufacturers need to consider the refrigerator’s noise — ice makers included. We hear every single clink and buzz. We love (and prefer) the french door concept, but the freezer drawer, when it’s fully loaded, is difficult to open and close. Also, the stainless steel scratches WAY too easily.

I purchased a Top load Whirlpool washing machine, replacing my old Whirlpool. I am so unhappy with this new one. I noticed that the water level are low...I had the tech here twice and they said that if here isnt any lights on the dash that the machine is working. I called the head tech, same answer. When I put the clothes in the washer I make sure that the clothes are evenly placed in the tub. The clothes comes out tangled and some not clean. Tonight I noticed that a pair of pant at the bottom of the load had white smudges/ I am so unhappy with this piece of junk/ I cant afford to buy another washer, so I am stuck with this.. I have tried all the different controls, still bad. I know the new machine are different than the old ones. I still believe that the water levels controls are not working. I have used my sister new washers and the clothes are not tangled and they are all clean.

We have had this washer for a little over three years. We are a family of 2 so it gets only light use. The agitator stopped working and the repair was going to be $370! The repair person suggested we contact the manufacturer but they refused to even pay a portion of the repair. Goodbye Whirlpool! And yes, it left white streaks on our clothes as well.