On the 27th March 2012 I bought a new Whirlpool 6th Sense washing machine S/N 411048002028 AWOE 9210 - 30 9Kg for E499.00. I brought it home and plumbed it adding in a lime filter on the water line to protect it from limescale. On the 14th September 2016 a service technician replaced the entire drum as the old one made so much noise and the ball bearings are part of the drum. On the 7th June 2013 a technician replaced the drive belt claiming that it moved if a light load was put into the machine. On the same day I added an extension of 3 years Guarantee at Euro 89.00. On the 14th October 2013 a technician examined the machine for a water leak but found nothing and charged me for the call. Out E25.00. I lived with the noise of the spin cycle ever since. The noise got steadily worse until 27th September 2016 when the machine finally packed in. I stripped the machine down to find the ball bearings on the drum completely rusted over so the drum was rotating without the cushioning. On the same day I bought a Bosch machine and decided to forget about the extra guarantee as the offending parts had already been replaced once and did not even last 4 years. I will bring it to the recycling yard later today as that is all it is good for. It was bought in Media World, Orio Center, Bergamo. It was paid for by Gianni ** who is my father-in-law and had a loyalty card for the shop.

Very functional microwave which also comes in convection oven if needed. Stainless steel, finger print resistant, is very handy and easy to clean. Overall very happy with it so far. Much better than the earlier Samsung that we had.

I own an FG flame lock water heater and have been having the same problems with the pilot light not staying lit. This is very frustrating! I have searched many websites and am not able to find a replacement thermocouple for the stupid thing. Also, I have been told that the parts for the type of water heater that I own is no longer available. I tried to call the Whirlpool number a handful of times, but unfortunately, I was on hold the entire time and could not speak with a rep. I guess that explains all of the complaints I have read on here. I would like to be contacted or have help from someone regarding this matter! I would not recommend this product to anyone and I am very dissatisfied!

I bought a washer from Lowe’s Home Improvement in September 2017, called a couple weeks after the purchase. They sent someone to repair machine. It is still not working. Called Lowe’s back. Was given an 800 number. Talked with someone at this number got nowhere. Was given another 800 number. I am waiting to find out what is going to be done. This is terrible customer service.

I have hated this Cabrio washer and dryer set since the day they were delivered brand new by Best Buy a couple of years ago. The washer does not clean well, often does not spin dry, and leaves some clothes dry after a full wash cycle!!! I have to wash small loads on the deep water cycle to even have a chance at cleaning the clothes. The clothes are so dreadfully compacted and tangled that it takes great effort to birth them out of the washer, unfurl them, shake them, and put them into the next torture machine- the dryer. It is as if Whirlpool intended to build a machine to twist clothing so tight that it requires a bodybuilder to untangle the clothing. Then the items are so incredibly crumpled that ironing has found its way back into my already busy life. Ironing is a massive challenge to the degree of wrinkles in the clothing. The slanted tops are icing on the cake. Cant even pull the clothes out of the dryer to the top of it because they slide right off. Cool.

I have a portable dishwasher. It does not dry the dishes when cycle is completed. I have to either leave the door open or take them out and towel dry them.

Have dishwasher wdf530plyw6 less than three years. Will only run on 1 hour cycle. No other wash option works. Called company, wont fix, offer other warranty plan. Utensil holder broke early on.

My Whirlpool refrigerator does well overall to maintain food items. However, even at the lowest freeze settings, some of the food items that are stored towards the rear of the refrigerator shelf have a tendency to freeze. This oftentimes results in food items having to be wasted. Other than that, the overall appearance and performance of the Whirlpool refrigerator is great.

All JUNK!! Replaced all new within the last two years. The washer I replaced was twenty + years and was still working fine was just upgrading, big mistake! Washer is sounding like it is going to walk out the door. Replaced dishwasher after twenty years and the new one was leaking within one year and recently got replaced. The new one did not last one year and also is leaking. Now washing dishes by hand. Lastly replaced hot water heater and that is junk too. Has six year warranty after one year pilot light wont stay lit, Whirlpool said would replace the gas control valve for free but I need to pay to install. I WILL NOT PURCHASE ANYMORE PRODUCTS FROM LOWES OR WHIRLPOOL AGAIN!!! HOW CAN A RETAIL COMPANY REPRESENT SO MUCH JUNK?

We bought this 26 cu ft fridge from Nebraska Furniture Mart in April 2017. In November stopped making ice. Was repaired. Now it’s not working again. Multiple enquirers shows this is a common problem with this fridges. I’m debating whether it’s worth the effort to repair it or just put in junkyard. WORTHLESS piece of shiny metal.

I bought the Whirlpool Cabrio washer 2 years ago. It started recently messing up and making a loud noise during spin cycle and gave me a UL code. I called the repairman and he is stating several things need replacing. Cost more than washer did at time of purchase. Bearings and 2 other items need replacing parts. 550.00 plus labor of 250. I will never buy another Whirpool. My previous washer lasted 10 years. I got rid of it for a matching washer and dryer by Whirpool. Worst mistake and Im out a lot of money. By reading all the poor reviews. Seems like Whirlpool would do something. Its a ongoing problem. Many people have reported. I have read many similar experiences and wished I knew before purchasing this set. If you are reading this do not buy this washer and dryer set.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

Water heater model N40t61-343 - Why does a water heater fail after 4 years when there is a warranty for 6 years? Is this water heater an omen for Whirlpool? I have a wife who is terminal and I trusted the Whirlpool name for hot water. What are Whirlpool going to do about this water heater?

We purchased a new home April 2013. All our appliances were new Whirlpool stainless. Looked nice. After almost a year our microwave started acting improperly. Beeping, changing screens, not working when buttons pushed. Then the micro wave had a melt down and caused the glass try to break, parts to melt and caught fire internally melting plastic. Notified Whirlpool and they sent out individuals to repair. After several weeks the repair was completed and we were advised that they did not understand why this would or could happen. We should be fine now. Well we are now again having this unit beeping, changing screens, not working when tried, and when entering numbers, number and time are not what was trying to be entered. This unit my wife says is possessed and she wont use it. She fears it will burn the house down. It is Velos model TR 2 24 11000 serial number. It now beeps and changes with door open as I read the serial number.

Wife and I bought a WRF990SLAM00 fridge in 5/2013. Seemed like the nicest model Lowes had at the time. The first one delivered had problems: it wouldnt stand level or seal properly, and had to be replaced. Another unit was delivered a few days later. This one - the same model - worked very nicely, for a year and a half. A few days ago, it got loud. My wife noticed in the freezer, some things were beginning to thaw. We called Whirlpool, who said, Oh, its over a year, and youre out of warranty. Sorry! Ok, so they suck. After we had a technician examine the freezer, he suggested, This is something Whirlpool needs to address. It wasnt the first (or fourth) problem with this fridge that hes seen. Called Whirlpool again, this time to gripe. Sorry, youre more than a year, so no warranty BUT, well sell you a service contract for $330! Hows that sound? It sounds like Whirlpool just disqualified themselves from ever getting their hands on another dollar from my family. Theres too many other companies who DONT treat their customers like garbage.

I like the washer for the most part. The thing I dont like is that even though I always keep the door open after doing a load of wash, the gasket continues to grow mold requiring me to do a monthly bleach/sanitizing process which is different than doing a bleach load of wash. The gasket also needs to be cleaned frequently. This is in a front loader.

I have Whirlpool fridge for a very long time since I own my house and for me is one of the best, is a great company and occasionally have to fix in a couple of times and afraid to buy another more modern and not last like this old fridge.

We bought a brand new basic refrigerator, freezer on top, no frills, no ice maker, no water dispenser (model #WRT359SFYB) in Dec. 2011. For months, things on the bottom shelf of the fridge would freeze. The more we turn the control dial down, the more things would freeze. Finally, everything stopped freezing, including everything in the freezer. After having to throw everything out, we called for service. One year and 4 months out from our purchase date and without an extended warranty, we were offered no help. The repairman said that we had a leak as a result of poor manufacturing and there was no refrigerant left. He filled it but said he needed to check with Whirlpool to see if they would cover the repairs. It turns out they wont. I called them myself and spoke with a manager who offered no options at all, other than paying more than the price of the fridge to have it repaired. I asked if they were okay with their product having such a short life, filling landfills and causing such problems for their customers to which she replied that they are man-made and have no life expectancy. Crazy! For a manufacturer of large, costly appliances, one would think they would stand behind their product more. She also said that she would file my complaint and would have let me know if there was a recall on the fridge or any of its parts. It appears to me that others have had similar complaints. I wonder what warrants a recall. I will never buy Whirlpool again.

Weve had the 3 door model (side by side fridge with chilled water inside and full width deli drawer, freezer on bottom w/ Icemaker) for 13 months now with absolutely no problems. Chilled water inside frees up door for more storage.

Surprised my daughter with a Whirlpool washer and dryer computerized, never again you have to stand at the washer half the time resetting it over and over. It takes all day to wash. Went to Lowes. They said yes you have to start it three times. What a pain. Never will buy one again.

The Cabrio washing machine I was told by salesman best made so I spent big $$, makes sense right?! Wrong! During spin cycles sounds like jet plane taking off, was told barrings or drive shaft is at fault cause water seeping inside, causing rust, Whirlpool didn’t seal it or designed it to ensure no seepage. Never again Whirlpool. I’m done with your ineptitude, Type: 580. mod. WTW6500WW1. Set.# CY4970595.

I purchased a Whirlpool range YGY399LXUQ in 2012 from a great local appliance store, Trail Appliances. In 2013 the control panel stopped working and I contacted Trail. They quickly came out and replaced the control panel. In 2014 the same issue came up, but Trail could and would not do anything so I contacted Whirlpool Directly - they came out and replaced the control panel. In 2015 (same month) the control panel is not working AGAIN and Whirlpool has washed their hands of it. A replacement is over $400 + installation. The stove is barely worth that much. I would have thought that they would stand behind their product, in that this is an obvious continual issue or at the very least the service that they provide. I would not recommend their ranges to anyone because they will not stand behind what they product nor will I ever purchase anything that Whirlpool makes as it is obviously low quality.

Worst Air conditioner brand I have ever come across. My personal experience with Whirlpool Air Conditioner is not encouraging. I have used almost all brands of AC but found that the quality of Whirlpool AC is not worth recommending. Please stay away from Whirlpool. I got one Whirlpool 1.5 Ton Split Air Conditioner (Model 3D Cool Xtreme, 6th Sense Climate Control) at my house about 2 years back. I booked a service request with the Whirlpool’s Authorized Service Centre M/s Western Refrigeration Co., NOIDA as the Air-conditioner was not cooling to the desired level. On the first visit on 20-05-2019, the service engineer advised that the AC was not cooling because the gas had drained and the gas is required to be filled for which there will be a charges of Rs 2500/-. Believing him, I agreed for refilling of the gas at his quoted price. He sent next day some other attendant team for filling the gas. Those attendants revealed that in addition to the gas, two valves are also required to be replaced at an additional cost of Rs 1600/-. Though I had a doubt about the correctness of their diagnosis, there being no option, we paid for valves also. Accordingly, a total of Rs 4100/- was paid by us.However, to our utter surprise, the AC stopped cooling within a couple of days. Hence, the service centre was again informed. The complaint was again attended second time on 04-06-2019 and we were told that they have again refilled the Gas.However, again the result was NIL. The AC was not giving cooling effect. Hence, third time again complain was booked. The first attendant once again advised for only gas filling after thorough examination. He sent an another guy on 20-06-2019 for gas filling who then revealed that the cooling effect is not there because the condenser coil is leaking and the same will have to be replaced at an additional cost of Rs 5500/-.The following important points emerges out of the above:- 1) If there was a condenser coil leaking problem, why it was not disclosed to us when the AC was attended earlier by various Service Teams consisting of various attendants in the process from the same service centre? 2) Whether my all money paid earlier for gas filling and changing of two new valves will go waste due to wrong diagnosis by your technicians?3) Keeping in view the earlier wrong diagnosis, I very much doubt the present diagnosis and feel that this is a ploy to extract more money from gullible customer who lacks technical knowledge.We spoke to the service centre officials up to three four levels on the numbers received from the call centre but after listening the matter they assure to call us back. After no call back from their side, when we try to call them, they do not lift our calls. The above facts clearly bring out the cheating, harassment and looting by the Service Centre under the aegis of the so called prestigious company M/s Whirlpool. The hard earned reputation and trust of the Whirlpool is being impaired by these unscrupulous service centre.No punitive action appears to have been taken by Whirlpool office against the unscrupulous service centre for unfair trade practices. Rather the person from Whirlpool office over call was also trying to coax us to pay some more money to the unscrupulous service centre who has already cheated us and extracted money earlier from us with zero results. My Air Conditioner is totally shut off due to mishandling and misdiagnosis by the service centre. We are acutely suffering due to scorching heat and over and above going through the mental harassment for the last two months.We expected an immediate resolution for the above problem on top priority basis without any further additional cost however despite my number of reminder through their toll free number, mail id etc. the problem still remains unresolved and unattended. It is highly disappointing that despite my writing repeated mails with reminders no senior person from Whirlpool has so far taken cognizance of the grievance and the customer has been left in the lurch to be harassed by the highly inefficient, incompetent and indecisive service centre officials who have miserably failed to address the issue and satisfy the customer.

I ordered this Whirlpool 29 cu.ft. white french door refrigerator online from Goedeckers on April 26, 2013. Delivered May 15, 2013. Ever since we got it, there was a frost buildup in left back of ref. Also ice would fall out of dispenser all by itself. Also a buildup of ice under ice bin. Water would also drip from dispenser. We thought maybe since it was new these problems would go away. But they just got worse. I called Whirlpool & they sent out tech on 8/12/13. He told me Whirlpool has a problem with these refrigerators & would order parts. Well after 3 times of cancelling repairman due to parts on backorder, I told repair I would call when parts come in. I keep calling Whirlpool & keep hearing parts are on backorder, saying parts will be in in 7 days. I call back in 7 days and hear the same lies. Its a shame that they cant get parts in knowing that there is a major problem. It sounds like a real quality control problem. I really pride myself on buying American made but Whirlpool is not helping my case for buying American made. It would be nice if they offered to replace it being they cant seem to find parts.

I bought a new Cabrio washer in August of 2011, and by December of 2011, it sounds like a jet engine when washing or spinning. It is still under warranty, but it is the same issue reported by countless others as I have discovered. Whirlpool should recall and find out what the problem is so that every consumer does not have to experience this issue.I will never buy Whirlpool again and I am going to make sure I spread the word about this machine to keep others from this experience.

I bought this Whirlpool dishwasher 3 years ago and the first time I used it I was completely blown away. We can run it at night and never hear it. The first time I turned it on I had to go back and check it to make sure it was on.

I purchased a Whirlpool washer and dryer from Sears in April of this year. Here, to date, I had to call four Toms to have this unit repaired. I contacted Sears to have the unit replaced. I believe this particular unit needs to be recalled. Sears informed me that the unit must be assessed by one of their qualified/certified technicians before a request to be valid. I have concerns about this statement. Employees will not go against their company in fear of retaliation. In addition, I paid cash for the unit and now cannot get my money back. I’m dissatisfied with Sears and their values.

This machine has been very reliable. We have had since 2001 and have had not issues, Im really not sure on how clean our clothes are. Sometimes they have a odor but this is common with front load washers. I leave the door open and put baking soda into the machine regularly. Also clean the rubber seal because mold will accumulating on it.

In January 2021 I purchased a front load Whirlpool washer and matching dryer. They were delivered on February 6 2021. The first load we found water on the floor. I thought I didnt close the detergent drawer so I proceeded with the next load. Again I found water this even through the ceiling tile in room below. So with the next load I sat in laundry room to see what was happening. When on the rinse cycle water shoots out the front of the dispenser drawer.Contacted service, they sent repair man. He ordered new parts and I waited over 3 weeks for next repair call to find out that whirlpool had part all along. Repair man came again and still no resolution to issue. He was told to order same parts again - still no resolution yet again. I fought with Whirlpool till they said they would give me a new machine. Now fighting because delivery people wont uninstall 1st washer and install new machine. Today is June 28 2021 and I still DONT HAVE A WASHER TO USE. I havent even used the dryer yet. I have $3400 and numerous hours with Whirlpool trying to resolve this issue! Can you help? Whirlpool continues to string us along, telling us to be patient, theyre doing their best.

Ive replaced my ceramic stove top twice. First time it was my fault, I dropped something on it. But last week I was the only one home, stove was off and I wasnt even in the room. I heard a bang, went and looked around. Saw nothing. But when I went to prepare dinner.... shock, the entire stove surface was shattered!!! Now at over $600.00 to replace it I AM NOT HAPPY!!!

We purchased our Whirlpool Gold series, french door refrigerator 22 months ago. The freezer and ice maker has stopped working. We had one repairman come out already and he couldnt fix it. We have another one coming in 2 days. I am very disappointed with the Whirlpool brand. I also bought a microwave, 2 wall ovens, and a dishwasher at the same time. The microwave makes a clicking noise every time you use it.

I bought this Cabrio Washing Machine just over a year ago and it never drained water when I was doing towels and bed sheets. Life got in the way, and I managed to run smaller loads in the regular settings. Now, the machine is just over a year old and it will not spin unless I put it on the rinse and spin issue. It takes well over 2 hours to wash a load of laundry. From looking at other reviews, this is a big problem. I would not recommend this washer to anyone. It cost a ton of money and was the worst washing machine I have ever used.

This washing machine has been the worst machine I have ever owned - I have called Paddys Market on several occasions to have a repairman come out and take a look at this machine, which they did - but the machine never got any better - it has never ever washed my clothes properly its a piece of garbage - clothes come out dirtier than when they went in and sometimes come out dry. Its so busy trying to save water - it doesnt use hardly any - and forget doing bigger loads - I WILL NEVER BUY ANOTHER WHIRLPOOL product again.

I purchased Whirlpool front load washing machine (Sport 1072 CB) in March 2013 and since then it has been my worst nightmare. Buying a Whirlpool washing machine was one of the worst decisions I took. The problems started to come from the first month itself. Many parts have changed and are still being done. I am continuously requesting them to replace the machine but they have decided not to listen. The after sale service of Whirlpool is the worst in the industry.

After yet another frustrating round of laundry I have to write this. This has been the worst purchase (Cabrio 6800 Washer and Dryer) Ive ever made. Like other reviewers, I thought I was buying a high-end (high priced) product that has performed miserably from day one. Clothes do NOT come clean and for some reason, towels and dishcloths get ripped and shredded. All cycles (except sheets/towels) do not dispense enough water. Of course the one that does, results in the ripped and shredded problem. A little more than a year after purchase, we got an error code indicating the computer board was bad. Code would come up during initial cycle start and again at the start of the rinse cycle. Whirlpool basically said tough luck but shortly after, we started receiving offers in the mail to purchase an extended warranty for $175. Out of principle, I did not do this. Instead we discovered that we could push pause/start/pause/start multiple times and it would eventually keep going. We are still doing that on EVERY load of laundry (start and rinse cycles). I am not far from just biting the bullet and buying a new washer. It will not be a Whirlpool. One positive note is that the dryer has performed well, unlike some of the other reviewer experiences!

Ive been thru 2 new French door refrigerators with the icemakers in the door. Ive lost all of my food more than 6 times! There is a design flaw and they are no longer making the large models. I finally figured this out after reading multiple reviews from a lot of people with same/similar experiences. The compressor freezes then the loud noise all while the temp slowly lowers and ruining your food before you know whats happening. To add insult to injury... After ordering my THIRD replacement, their contracted installation company wont communicate with me to let me know when it will be delivered. Ive been without a fridge for 3 months! Calling them takes a full morning with hold times over an hour! I will never buy another product from them. I have a taboo LG French door with an ice maker in the door in my other home and it has been perfect for 7 years. Just be very careful and read reviews from people who have owned one for at least a year.

My refrigerator is 6 months old and already has rust and leaks. I am told it is because I live too close to the beach. Do not buy their sub-par products which come along with absolutely awful customer service. Will never purchase anything Whirlpool again.

Always buy an extended warranty if you are going to buy a washing machine. Mine cost $129.00 extra and it is not through Whirlpool. Three control panels and two tub bearings later, the extended warranty insurance carrier gave us our money back to buy another machine. My wife loves the operation of the Cabrio, so we bought a WTW8200YW today, in the false hope that it will work much better. We have an extra washing machine in the garage for the three week period before repairs. The serviceman has to come look to verify the problem, then come back when the part arrives.

A new washer, kept in pristine condition, indoors in an upstairs laundry room, used by 1 person for 4 years should NOT rust out. I took pictures and sent them to Julia ** a company representative after she offered me a discount on a new washer but would not send me an email with directions like it was some kind of secret until I insisted several times. The email simply had her phone number. I was to let her know the models I would be interested in and she would tell me if those were available for the discount. Then the company would charge me, deliver the new one and charge me to install and remove the old one. How is this for a great company. I sent her the models I might consider. No word back. Whirlpool, not looking like a stand-up company to be proud of. Shame on this company.I like the machine, but seeing it rust out before my very eyes has changed my mind. How will they address a 4 year old washer rusting from the inside out? How will they address a 1 year warranty? I found a copy of Whirlpool Washer Warranty that used to have up to five years for issues such as poor workmanship. It takes more than a year to find these things out. Dont make them if you cant guarantee that they will last. My last Maytag lasted 18 years and was still in good shape. I just wanted a model without the agitator in the middle and on that would conserve water. Should have kept the old one.

Whirlpool 500galaxy gas water heater - First week ran great. Now Im lighting every day. Called Whirlpool and just getting run around. Had it a month today, still lighting every day. Cant afford to buy another.

The only thing cheaply made is the push latch on the dryer. Both are pricey for what you get, I thought, though they were the cheapest Lowes offered. We have had the pair for a little over a year. So far no real problems, though we really do not like the latch door. You have to slam the door to get it to close. To do it over we would probably have shopped a little longer and for the same money got a better deal.

The machine Will Not Clean the Clothes. Had to Buy A Maytag Washer.

Model WMH1164XWS-3 Microwave - I purchased a brand new home in 2012 with all stainless appliances, within 3-5 months the outside door handle where it attaches at top and bottom of microwave has chipped, so that the screws are shown. I havent had the time to look up the replacement part until just now. Very disappointed in the amount of money a handle only cost.

Never ever go for Whirlpool. It has the worst customer service. We brought an oven but accidentally we broke the inner oven plate. We called up the customer care person on 18002081800 and tried asking him the dimensions of the plate pr at least how we could reorder it. He never listened to us. He just got our details. Said that technician will come at 11am tomorrow and disconnected the call when we were trying to explain what our query is all about. Is that all the respect a customer deserves!? Is that how whirlpool trains their service people!? He doesnt even have the basic courtesy to listen to the customer, I wonder how was he even recruited as a customer care person. If you want at least your basic respect, please DONT BUY WHIRLPOOL.

Overall??? Ive owned this Whirlpool side-by-side refrigerator for a year now. Love it except for semiannual cost to replace the filter. My brother recently installed the same model in his motorcoach. Yes I recommend this appliance.???

In July of 2014 we purchased a Whirlpool Gold Series model #WRF990SLAM00 refrigerator from Lowes. Within 6 months there was ice and condensation in the top of the fridge. After repair came out and replaced the main circuit board we thought the worry was over. It hasnt worked right yet, making loud noise. It continued to never make ice correctly and now, 18 months later our freezer is out! Everything is unthawed and it will not make ice. We called Whirlpool to explain our problem and the only response we get from them is....they can sell me an extended warranty. We spent $2400 on a refrigerator and they wont even talk about fixing it. We dont want anything free, just ours working. Needless to say Whirlpool lost my business forever. They will not stand behind their products!

We get the error code F1 in the start of the cycle and when there is 21 minutes left, we have to stop and reset at least 7 times before the water fills. We put a new sensor in for over $200. The second problem is it goes off balance no matter what the load is. I was going to have it fixed (if possible). After reading all the above I wont waste any more money on it and go buy an old fashioned reliable washer. What a piece of money sucking machine especially when I dont have any extra money to waste down the drain. I wish I knew before. There are a lot of people this time of year I would have rather given the money for a needy cause. How disappointed we are with Whirlpool!

WARNING: Do not get the warranty plan through Whirlpool if you have stackable washer and dryer, you will have to remove the dryer yourself before they come out to service your appliances. I was willing to pay extra to have them take it down, the contractor said I had to call the extended plan service, yet 6 telephone numbers later to include the complaints department to no avail... Whirlpool contracts out so get your own and you may save a few dollars!

If you are on this website, keep reading. You will definitely find many people that have your same problem. We purchased our refrigerator 5 years ago. Since then we have had a leak inside of it which is gradually forming mold that I have to cleanup. The ice maker and water dispenser do not function for months at a time. I just purchased 2 drawers for the same reason as the review on May 5, 2016. The tabs break off of the front panels and the panel falls off of the drawers. Theres no way to pull them out. We paid over $200.00 for two drawers!I spoke with customer service at Whirlpool and read them the 2016 review. Their answer was that you should not believe everything you read. My answer was, How cant I? Its happening to the refrigerator I own. They just kept giving robotic answers. The conversation was that of someone that is in denial of having a problem. They dont care. Instead of at least offering a discount on the drawers, she offered me an over $400.00 one year warranty. Pathetic! Whirlpool has just lost another customer.

We purchased our side by side refrigerator from Lowes. When it was delivered, we noticed the freezer door was rubbing on the ice maker and would not close properly. The refrigerator was replaced. Then about 10 months later, the water dispenser stopped working. Service came out and said the water line had ice in it (we do not keep the freezer on high). They replaced the water line in the door. About 6 months later, after the unit was out of warranty, the same thing happened. We called Whirlpool and they said there was nothing they could do, because the unit was out of warranty. I cleaned out the water line tubing myself and the unit worked again, but the problem occurred again several months later and it does not seem right that the water dispenser line should keep freezing up. In addition, every two months we have to take the ice maker apart because the ice will no longer dispense because of an ice buildup in the ice cube container. We used to think that Whirlpool made reliable products, but with these problems and Whirlpools unwillingness to correct the problem, we will never buy their products again. They have lost a long time customer because of their products now and their customer support.

How I wish I had read this board before purchasing! This is the worst washing machine made. Put your clothes in the sink, add water to cover two thirds, add detergent, slosh around slowly for a few minutes, wring and remove. You have replicated a Cabrio wash! I have complained repeatedly, had a repairman who assured me it was working properly (as designed, too little water, too little agitation). I was a lifetime Whirlpool client.

I purchased my Cabrio washer and dryer 4 years ago, my dryer doesnt dry completely, I have to do 2 to 3 cycles to dry. My washer has an f51 code and I have problems unlocking the lid and it takes 2 to 3 hours to wash. This is ridiculous and it causing my electric bill to spike. Is there a recall on the Cabrio?

I purchased a Whirlpool refrigerator in 2014. It is a side by side with ice maker in the door. About 8 month ago the ice machine stopped working. I called an appliance repair center and they diagnosed the problem as being the control board for the ice machine. After only 3 years this stopped working? I gave them to OK to fix it. A few days later I was informed that the part is on backorder for a few months. Well a few months has become 6 months and no part is available. I contacted Whirlpool and they called me and promised a solution, but then they never contacted me again. So it is almost 7 months later and I still have no ice. How can a relatively newer product break down and then not have a part available? Whirlpool absolutely does NOT care about their customers and does NOT back their products. Stay away at all costs.

Retail price, $3100. Purchased from Sears Outlet for 2/3 of that amount due to dings on a side panel, back and some blemishes on the front. Still sold as new with a new warranty (Good thing!). Ive had full use of the unit for 1 month out of 3 that Ive had it. Freezer stays at a temperature in the mid-20s and, after 4 repair visits, it turns out the compressor is faulty and now Im waiting for the 2nd part to arrive and be installed to see if that corrects the problem. Sears stepped away from the problem saying it will be repaired. Whirlpool has wonderful telephone support that is totally committed to me staying with a faulty appliance until its fixed. My view is that a unit that expensive, should be no problem to replace allowing Whirlpool to take as long as they want to make repairs and re-sell it. But no; their commitment is to keeping the refrigerator in my house and running a service tech back and forth while I continue tossing food that cannot be used.

A 12 year old built in double convection oven that has a retail cost of $4500.00 has its control pad discontinued. I cannot repair my investment. I spoke to the executive offices & they arrogantly told me that they only have to make parts for the length of the warranty. Suppose you had a 12 year old Honda that they discontinued a critical part would you feel swindled, I asked. We dont make cars was the response from the executive customer care agent. ARROGANCE How to destroy a company one customer at a time.

I purchased a washing machine FS65 on 10-30-2005. In Oct. 2009, my washing machine developed some fault so I contacted the Whirlpool service center and got it repaired. Again in Dec. 2010, the appliance became faulty and so I contacted the service engineer to attend to the machine. He repaired it and I paid 2500/-. But the very next day, my appliance showed the faults again. It was rectified with replacement of PCB and I was charged 2786/- on 01-20-2011. Again on 09-04-2011, the machine became defective. On the call to service center on 09-05-2011 and attended by engineer on 09-06-2011, I was informed that PCB is defective. I failed to understand that the PCB replaced in January was of what quality that it has to be replaced now after such a short span of time. I feel that this is clear cheating with me.

Bought these Whirlpool Cabrio Platinum combo about three years ago, nothing but junk from the get go! Washer never gets clothes clean, towels always come out smelling mildew and sour no matter what liquid soap you use Tide, Gain, whatever same results. Plus always mold coming from inside tub and yes we use refresh weekly and wash it out on refresh setting. I’m so tired of our towels smelling sour but can’t afford to buy new washer and dryer living on fixed income. If I could these would be in the recycling yard now. From everything I’m reading all new H e machines are crap and energy efficient my foot. I wish for my old style washer and dryer. WHIRLPOOL YOU HAVE LOST A LONG TIME CUSTOMER!

I chose a Kitchen Aid Stainless Steel, Counter Depth Refrigerator from Lowe’s in early February, 2018. (Model #KRFC300ESS) At the time KA was recommended as the best choice. 1) Within a month there were numerous rust stains on the French door and that needed to be replaced and 2) There is the Damper Control unit which makes a intolerable noise until you replace this motor. This noise then returns....about every three months. Plan on paying just under $200 every year for the life of the refrigerator (at average of 14 years= $2,800!). We have had servicemen to our home now 4 times since our 2/7/18 delivery. A local retailer just rated Appliance Brands in 2020 for reliability and the amount of times serviced and found Kitchen Aid to be 10 of the 10 listed. My recommendation would be to try another brand. This one creates a money pit. :(

I purchased this set in November 2013, it is now October 2014. I made the same mistake as many others have made (according to the reviews that I have read on this site). Because I have owned Whirlpool brand appliances before - including washers/dryers - I assumed this new HE machine set would be every bit as good + quality. Unfortunately, I did not do my homework!Everyone is right - this Cabrio HE washer/dryer combo is nothing more than expensive JUNK!. My complaints are all the same as everyone elses: the clothes do not get clean, soap residue remains on clothes, the clothes even have parts of the articles come out of the wash cycle dry not even having had the water touch the articles in areas! The dryer has been repaired once already for a dryer sensor problem & overheating, now both the washer & dryer are making some ridiculous hum-drum noises! Even with the extended warranty that I purchased, I can see the loop holes built into it; theyve got me over a barrel with the nonsense mumble-jumble tactics of having to qualify for adequate service repairs for replacement of parts (3x on each machine) they cant find, before even attempting to negotiate a buyout that will never happen. Never again, Whirlpool anything!!!

I love the look and performance of my Whirlpool Dishwasher. It could be a bit quieter, but overall I have no complaints. My washer was already installed in my home when I purchased it and I must say, it helps when the family gets together and you don't feel like washing the dishes. The dual chamber pod holder is great if you need to use and the heat function works wonderful. I don't have the problem of the left over water that a lot of dishwashers leave behind and no spots!

Love my new Whirlpool Refrigerator! Works well and no problems for the last year. Filters are pricey but found some at Lowe’s cheaper. Whirlpool stays in touch frequently emailing information about their products, some useful some not applicable. Would I buy this refrigerator again? Yes, I love the ice maker, it is quite large (enough to fill a small cooler), and the convenience of crushed or cubed ice is nice. Most people complain about the motors are loud yet we have not experienced that.

My Whirlpool super capacity 465 started flaking out on the temperature and burned our dinner. I had a repairman over to repair which he did after about 3 hours of testing. Less than 6 months later it did the same thing. Overheating in the oven.

I have owned Craftmaster 30-gallon hot water heater and the only things reliable about it is trouble and aggravation. I purchased this in 2004. I have had to replace the controls, valves, wires, etc. three times in 10 years. And Im now looking at doing it a fourth time. The design of these parts are utter crap! Cheap plastic! After replacing these parts, this hot water heater works great for a few years, then invariably starts acting up. The pilot light goes out when the heater is supposed to kick on instead. Getting the pilot light lit again, is an exercise in futility! The red reset button once released, immediately extinguishes the ignition flame. Supposedly, after holding it down for 1-2 minutes allowing gas to build up, it should light the coils... and if it doesnt, youre supposed to wait 10 minutes to try relighting again. You can repeat this process for 12 hours, and if you finally do get this temperamental piece of junk to light, youre lucky. Customer Service has been useless in assistance. All they want to do is send you e-mail, and get you off the phone. Not to mention, Ive been told by many a rep that the hot water heater extinguishes itself, if water is overheated, and that it must be my fault for setting the temp too hot. Baloney... Ive been told that the underside vent must be cleaned every few months, so that air flow is accurate. Makes no difference one way or the other. And recently, Ive been told by a rep, that my 40-yr-old house likely doesnt vent exhaust out through the roof properly. This product is inferior and unpredictable. Its great when it works, and the pilot light stays lit. God forbid it ever goes out though! It is next to impossible to relight. I have spent more money on service technicians attempting to repair/replace parts, than it would have cost to simply by a new hot water heater. I miss the old days, when it was easy to light a hot water heater: Strike a match, turn the gas on, and instant hot water. No muss, no fuss. Having owned many properties w/ hot water heaters over the years, I have never encountered such repeat problems, as with this product. Its simply not reliable, and not worth the $$$. Never again, will I buy a Craftmaster Product. And I had no clue that there was a Class Action Suit filed, and a settlement involved in these faulty units. Whirlpool/Craftmaster should have notified everyone, who purchased one of their units. Now Im stuck w/ a constantly broken unit, and zero recourse. I will never buy anything Whirlpool/Craftmaster again, as a result.

I bought a semi automatic washing machine from Croma Store (Gurgaon) on 03/09/12 Model no A-72H* and I regret to say that the water direction changing knob (to change water flow from agitator to dryer), has broken. The machine is not even 4 months old and the water inlet is broken. How can this happen in a brand new washing machine? You claim to have durable home appliances products and your machine does not last 6 months? Can you see that the broken piece is attended to or replaced at the earliest?

My Calypso washer is broken AGAIN. I have spent more in repairs than the machine cost originally. After more than a dozen emails to customer service they have still not answered me even once. Its obvious they put as much pride in their customer service as they put into the assembly of their products.

When I first bought this machine I loved the big tub, but I was concerned that there was no agitator. It confuses me how clothes can get clean if there is nothing to rub them again. Even in the olden days they rub clothes against a board. Well my concern is valid and I believe the washing machine industry needs to go back to the old model, as this new version does not work.Here are all the problems: 1) The machine judges how much water to put in. This doesnt work. I follow the directions and outline the perimeter and dont overload, yet still it just barely puts in enough water to make the clothes wet. Im all for conserving the environment, but enough water needs to be provided to actually get the clothes clean. I would like to be the judge of how much water should be used, so I would like to be able to tell the machine if it is a small, medium or large load. I do believe that the lack of enough water is why the clothes do not come out as clean as they should and why they end up smelling (see #4). 2) There is no agitator, so there is really nothing available to help clean the clothes. Spinning them around like a maniac is not enough, which leads me to the next problem. 3) The clothes come out twisted terribly and then many times come out of the dryer wrinkled because of how hard they were twisted. I tried to select a less harsh spin cycle, but then the clothes are too wet to put in the dryer. There is no happy medium.4) Biggest problem to date: Our clothes/towels have all started smelling. You know that smell when you leave your clothes in the washer too long (like two days) and then put them in the dryer? Its that smell. The clothes/towels dont smell when you immediately take them out, but they do smell at any bit of moisture. When I dry myself off after the shower, I notice the newly washed bath towel smells like a wet dog. I have used the pods, liquid detergent and powder. I dont remember having the smell problem when I first bought the machine and used powder, so I just returned to using powder today. (Ive even tried doubling up on the pods, but the clothes still smell.)This leads me to problem number 5: When using powder in this machine, the machine does not empty the powder container completely, and so the clothes do not get the required amount of detergent. Often there are clumps left over in the powder dispenser, but not always. (This is what led me to go to the pods and liquid detergent in the first place.) But at least with powder (I use Gain) my towels dont stink after the first time I used them.I wouldnt recommend this machine. I really researched machines before I purchased this one, but they all had bad reviews, so how do you pick? And I never look at the good reviews because we all know so many people are paid to rave about products they know nothing about, or it is a company employee writing the review. This machine is a huge disappointment. I am going to try adding a rinse cycle like a previous reviewer suggested. Maybe the extra water will help with the smell. Of course this is not good for the environment though, so this whole way of making washing machines with no agitator and limiting water defeats the energy efficient goal.

Whirlpool g2 convect/micro over the stove oven - This top of the line oven is JUNK, KEEP YOUR MONEY-DO NOT BUY THIS JUNK! I have had problem after problem. Starting after only three months. Defected door switch, touch screen, flashing screen, error message. The service repairman and I are on first name bases. Thank goodness for the, out of my pocket warranty which I no longer plan to keep. I NEED A OVEN AND DEFINITELY NOT A WHIRLPOOL.

I purchased Whirlpool dishwasher in March of 2011. In July of 2011, the stainless steel front started getting rust spots. Called Whirlpool and they sent a local repairman out. After 3 weeks, I called Whirlpool again and was told that the rust is cosmetic. I insisted that I have other appliances with stainless steel and they do not rust. Either they used a inferior grade of steel, or its not steel at all. They repeated it was cosmetic and they are unwilling to do anything about it.

Apparently the planned obsolescence period for Whirlpool ovens and microwaves is 11 years. Last month, we had to get the oven repaired, and now the microwave has stopped heating. Coincidence??

I purchased a Whirlpool duet front load washer on 21 Apr 10 and it has experienced a major failure. It needs a new rear tub and basket, and the parts alone costs $700. The machine is barely four months out of warranty. After a lengthy conversation with a Whirlpool customer service representative, I was told that without an extended warranty, they were very sorry and there was nothing that they could do for me.

We purchased a Whirlpool refrigerator (Model WRB322DMBM00) in April of 2015 from Lowes. Within 5 months rust stains started to form at the bottom of the top door and the top of bottom drawer. RUST STAINS!!! We do not live in a humid area or near the ocean. It is a design flaw I believe in the gaskets. I called Lowes first for their guarantee but they said it was cosmetic and not covered. Then I call WP customer service and they are sending new doors. Thats fine but its going to happen again. I requested slate instead of stainless steel but they wouldnt do it. Plus finger proof is a joke (monochromatic). Very dissatisfied customer.

Whirlpool Cabrio HE washer - Purchased my set in 2007. Has not worked properly most of the time we have owned. Lid locks our clothes in when the machine malfunctions and we have to barter with the machine for hours of Google suggestions to get the clothes back out. Still dirty. Or still soaking wet, not spun. Ive never seen so many error codes from one machine. I would never purchase this brand again. The only pro is the load size, which trust me - we have spent more time, water, energy & $$$ with the washer not properly working than the large capacity has saved us.

At after 4 years of use, my double door refrigerator is giving cooling problem. Upper refrigerator part has excessive cooling and lower part has no cooling... after complaints in customer care, engineer was sent who changed the part that regulates auto cut... it gets blocked by ice so cooling air is not reaching lower part. Once changed exactly after 5 days same problem started... In spite of complaints no one came to check for good 2 wks. After long fight, it was defective board that was changed again. After 3 days same problem again, board was changed... Now after 2 and half month same problem. And now today service center has replied that engineer will be sent after one week.

Bought the hot water heater, installed it. It leaked from bottom. Whirlpool warranties it. Replace it with new heater. It too leaks. I Google problems with Whirlpool hot water heaters. Found over 1500 complaints.

Love the chrome exterior and overall appearance of this side-by-side. The compartments and shelf spacing are well thought out & offer flexible adjustments. The outside components on the freezer (crushed ice, ice water, ice cubes, & light) I love, and most importantly the unit comes with a built-in replacement water filter.

We purchased the Whirlpool model# BFG1J4040T3NOV 40 gallon natural gas hot water tank in the spring of 2010. The pilot light went out this weekend, 2011. And it will re-light but does not stay lit. This was bought at Lowes, rated as a 9-year warranty on the tank and parts. This is premature failure of a product that is listed as 9 years. Due to all the other similar complaints of this Whirlpool hot water tank, I would like my money back plus installation. I do not want the Whirlpool replacement as obviously it does not work. I will use a different brand and vet it much better in the future. We almost purchased at Home Depot but decided it would be a better bet to go with the Whirlpool reputation and name and Lowes than with the only Home Depot option, which is the self branded water heaters. It was a big mistake!

This was a substitute for model I actually wanted, I was told the one I would receive was the newest model version of the model I wanted. What that meant was it was the stripped down version. It does not get clothes clean nor does it spin/balance the load which causes it to walk around the room. It is only 9 months old and I need a repairman.

This product is just DISAPPOINTING. The gas knobs got stuck TWICE IN 13 months only! The range is NEW! The first time 3 out of the 4 knobs broke, this time only one. It would not turn off, so we are forced to climb on the counter and turn the gas off every time we are finished cooking and turn it on again. The company wont be able to send us anybody till next week, which will force us to go on like this for NINE days plus, of course, the time it will take to order the parts needed.There is not even a back up emergency service, which should be in place since we are dealing with GAS! I have heard complaints about this product in this area: in my opinion the range should be recalled. Of course, the representatives one talks to are all trained to keep calm and reply the usual things: Oh, I am sorry etc. but the bottom line is that neither the product nor the customer service are good (the first customer service person was not very friendly either). I highly recommend that you AVOID this range if you are considering buying a gas one with double oven.

It goes off balance, frequently. It is moldy and stinky. I wipe it out, use a cleaner and leave the door open, but it still stinks. I am getting rid of it and buying a Speed Queen top loader. I am extremely disappointed in the front loader Whirlpool.

My Whirlpool electric range has been a nightmare! I bought this thing 5 years ago and I am having it replaced on Saturday! It had a cleaning thing where I put in distilled water and 20 minutes later I could just wipe it out. Not true. I had to use oven off??? Next the oven would not work. Learned if I turned off the power it would reboot itself! The next thing it did was all on its own it turned the temp. from 250 degrees to a full BROIL. The oven now will not heat up to 350 degrees! I just blew $1200.00! On the other hand I did buy a Whirlpool fridge. It has been awesome!

I dont know who is the bigger idiot. The designer of this washer or me for not reading the countless bad reviews. I bought a Whirlpool 4.3 CU FT TL WTW5000DW machine on 7/19/2015. It does not come close to cleaning clothes. It now takes me three times longer to do laundry because I have to check every piece of clothing for any stains. These are minor stains mind you but, they will not come out unless I use something like Spray and Wash. My time is valuable, maybe I should drag my clothes to the river and beat them on a rock. Very disappointed.

Bought this Whirlpool Cabrio washing machine 4 years ago not knowing it was a low level water washing machine. A man would have had to design this piece of crap. Not only does it not clean the clothes because the agitation on it is as slow as sloth. On top of that the clothes tie themselves in a knot when finished. If you don’t want the frustration of clothes washing, I would highly recommend you not buy this type, if you enjoy cussing then this machine is for you.

I had owned another Whirlpool Washer before, which died. I purchased this one. It was noisy and unreliable. Whereas the previous one lasted for 10 years, this one stopped working in less than 6. I went out and replaced it with a GE instead.

Whirlpool Gold Series French door, bottom freezer. - This fridge is beautiful. Thats as far as the pros go for it. The Freon is leaking and cant be repaired because of where the leak is coming from. I can always tell when its time for a recharge because it leaks water profusely when at a low charge (every 4 to 6 weeks). We paid over $1800 for this fridge back in 2013. It has been just over two years and we are now having to replace this fridge. I cant express my frustration at this point. Whirlpool wont do anything to help us. They told me, You are out of warranty, and thats all they have to say. Thats over a thousand dollars a year to own this POS when you consider taxes. Over $1250 a year when you consider the service calls along with it. I will not purchase another Whirlpool product ever again. I am disgusted by this company and their refusal to stand behind their product. They have literally stole money from me and are laughing about it. Do yourself a favor and stay far from Whirlpool.

I purchased a 29 cu ft Whirlpool French Door refrigerator (WRF990SLAM) Feb, of 2013 from Lowes and have had nothing but problems since I purchased it. First, I noticed that the fridge sounded louder than normal. Then a few months later, ice started building up in back of the fridge. Then the most craziest thing ever started happening, the water dispenser started randomly shooting out water. Lastly, the ice maker takes forever to make ice. Still to this day, Whirlpool has yet to fix the problem. Funny that the technician said that theyve received a lot of complaints regarding the same issue for this model...so, I say you should be able to fix it then or replace my fridge. I have a 2yr extended warranty which states if they cannot fix my fridge after 3 attempts then they have to replace it. They refuse to honor that. Whirlpool and Lowes are full of crap!!! Whirlpool doesnt care at all that their products are crappy and their service is bad. They sent me a survey asking how do I like my product and I informed them of my issues and they sent me a response to purchase an extended warranty. Now, if they really reviewed the surveys, they would see that I have an extended warranty for 2yrs but regardless of that what about the issues Im having with my fridge? Do you not see my comments? If you didnt care you shouldnt even bother asking. Lowes pretended to care and made me believe they were going to replace my fridge but then sided with Whirlpool and said that they have to make 3 unsuccessful attempts to fix the fridge but each attempt has to be 30 days apart. Thats a bunch of crap because its been 6 months and my fridge still has not been fixed or replaced!! I have a Samsung side by side that I bought a year before Whirlpool and never had a problem with it. I bought it from Home Depot also, along with a stove microwave and dishwasher. I will be sticking with Samsung and Home Depot from now on!

I bought all new Whirlpool appliances. In my opinion Whirlpool has the best product at the best price. I don't buy anything but Whirlpool. My new bottom freezer refrigerator has more room than my previous side by side. The bottom freezer is a great feature and works very well for me. The shelves are adjustable. There is plenty of room in the doors. It has a meat drawer and humidity control vegetable bins. I was worried I wouldn't have enough room for my food but I am happy to report there is plenty of room. The freezer has the pullout shelves and automatic ice maker. It has a great appearance and takes less room than my previous side by side. Overall, it is well worth the price and I am not sorry I bought this refrigerator in the least. It can't be beat.

The Whirlpool Cabrio washer was extremely expensive to purchase but is rusting out and the circuit board is going out. We have had cheap washers last longer than this one and just to purchase the circuit board will be more expensive than another cheap washer. These boards go out right after the warranty goes out and I think that they are timed to go out. (The exact same thing happened with our dishwasher and after the board was replaced, it has lasted many years). Whirlpool should replace these for free since they do not last that long and are very expensive.

We bought a Whirlpool side by side refrigerator in September 2009 for $898, which was a lot then. Last fall the ice maker jammed and started dumping ice in the floor. Yesterday, we noticed that things in the freezer werent solid. After checking, we found our frozen food had thawed and things in our fridge werent very cold either. We called Whirlpool which was no help. Then we called a repair man who told us, “There was a leak in the seal system and it was low on freon. Would have to replace a compressor, evaporator and it would be better and cheaper to just buy a new refrigerator. It has just turned 4 years old. I called Whirlpool again and they said they didnt know why it went bad. I said is it a recall or just a bad refrigerator. The girl was no help at all; I kept asking to talk to a tech and finally asked for their corporate office address which she said was 553 Benson Rd., Benson Harbor, Mich. 49022. I now have to buy a new refrigerator and it will not be a Whirlpool.

I bought a new Whirlpool refrigerator from Sears and within a month the refrigerator side did not maintain temperature where milk would not spoil... Cool but never cold. I called Sears and they said its Whirlpool warranty to contact them. This I did and about a week later they contacted a local service company they use to maintain their equipment... Long story short this will be the 4th time they were informed the refrigerator still doesnt maintain temperature... Food had to be thrown out because of that.I asked them to refund me my cost or at minimum get a working refrigerator to me because after 4 attempts at trying to fix the problem it still exists... They just want to keep sending a repairman out there who still cant figure out the problem and that has cost me much time away from work not the mention the spoiled food costs... Even when complaining my dilemma to the repairman he said, All they will do is keep calling us and kick the can down the road... They could care less about what it has cost me in time and money... I had to give 1 star to this company but they dont deserve even that one... Dont waste you time thinking a warranty by them is worth a flip and now over 3 months Im without a refrigerator...

We purchased a high end KitchenAid Refrigerator Dec 2018. Rust developed on water dispenser door in less than year. They would not honor warranty. Since March we have had ongoing cooling problems with 5 service calls and 4 different fixes and unit still doesnt work. Local authorized service company, Fields, in Jacksonville FL is incompetent. Whirlpool doesnt return calls. The products value is not consistent with the high cost. Here are the gory details. Ref: Setzers, Jacksonville FL (sold unit). Fields Jacksonville FL (factory authorized service company).Less than 1 year in, it began to rust. We called for a Warranty check. Fields Appliance (their factory authorized service company) came out and agreed all 5 doors needed to be replaced. A month rocked on, finally we called to find out where the doors were, and were told Whirlpool (Makers of Kitchenaid) denied the claim. Citing that we lived near the coast! Well, our other appliances arent rusting and the refrigerator doesnt sit outside! They sent us a 6 oz bottle of rust cleaner. A few months later, this refrigerator stops cooling! This was in March, 3 months out of 1 yr warranty. The refrigerant system is warranted for 5 yrs. This was also right at the beginning of Covid 19 shutdown. Fields could not give us a appointment, due to shutdowns. So, I called a local company to fix it out of pocket. He discovered a leak in the coolant lines, fixed the leak and replaced the coolant ($453.61 on 4/9/20). Great, it works! About 3 weeks later, it stops cooling again. Called local service repairman out once more to see whats going on. He replaces a thermal bi metal sensor and well ahh! It works again ($100 on 4/28/2020).About 3 weeks after that, it stops working again! We are thinking by now, its a problem for Setzers, Whirlpool, and Fields. We call the local service repairman out to confirm and he states that the evaporator fan motor will need to be replaced, and that part replaces all sensors as well ($59.99 5/28/2020 service call). We call Setzers and schedule an appointment with Fields. First appointment we could get was 6/16/2020. Guy comes out, and cited a factory defect, per a technical bulletin he had, and relocated a sensor. Simple as that, he assured us it was fixed! Even though I pointed out it felt no cooler when he packed his things to leave. It did nothing! In the background Setzers (when they would call back) were supposedly working with Whirlpool to help fix the problem! Whirlpools reply was that since our repairman was not factory authorized, it completely voided our warranty! Explaining we had no choice, since Fields wouldnt come out and by now we are without a working refrigerator for 3 months, they could care less! Feeling totally frustrated, we call Fields again! On 6/19/2020, they send out another repairman. This guy came in, opened up the back, and immediately stated the refrigerant was overfilled. Didnt do any diagnostics, just told us that we were **, and walked away, without even putting the refrigerator back in place! Neither Fields rep hooked up a diagnostic tool to confirm any real issue, I guess they just knew! Total incompetence! So... As of now we have paid the local repairman ($448.33 on 6/26/2020) to order the evaporation fan motor and install it this coming Monday (7/20/2020). Total amount out of pocket at this point, $1053.90. It took that long to get here! Wish us luck! Setzers wiped their hands clean of the issue and told us to call Whirlpool. We did have not ever received callback.

WRF989SDAF 29 Cu. Ft.. Weve had nothing but problems from this refrigerator. Water filter stopped working after 3 months. At one year, the left corner froze over and created a big bulge and repairman said it was a recall for a part and he had to completely dismantle the left side of the refrigerator. At one year 3 months, the ice maker started leaking water and all the ice melted and ruined our hardwood floors while we were on vacation. At one year 6 months, the freezer stopped working and we had to throw out hundreds of dollars in food. Along with the freezer stopping, the ice maker stopped as well and the water dispenser starting leaking again. What a nightmare this refrigerator has been!

Purchased fridge in November. Broke 1st time in May. Design defect that Whirlpool knew about. Repair was to move a part called a thermistor farther away from where ice was building up. Broke again in July. Called for service July 28th. Its now Aug 23rd. Was just told by repair service parts might be in Sept 15th. Had to throw food away twice, missed work 5 times for service calls. Repair company & Whirlpool have done nothing but lie to me. All Whirlpool offered was a $150.00 inconvenience fee. Not even close to what Ive lost. Never even received that & now they wont return calls. Talked to 5 different people at Whirlpool, including supervisors. All said they would call me back, but didnt. Keep leaving messages & they just ignore & dont call back. Still no fridge. Want my money back or a new fridge at this point.

We live in Hawaii, so the price for our stacking closet size unit was exorbitant. It was over $1,000.00. It is small so the size of loads are small too. We bought one that is supposed to sense the load size and deliver the correct amount of water. It does NOT do this. Reviews online show complaints of this same nature. It does clean well but we have to do very small loads to get that.

I purchased a Whirlpool washer 7 months ago, and a month ago, it broke. I have been without my washer for 1 month, and it has been repaired 4 times in that month. It is still not working. All I get is that, its under warranty, and there isnt anything they can do, but to keep trying to fix it. I have been having to take my clothes to a laundromat, and pay to have them washed. I have asked for them to deem it defective, but they refuse.

I bought a Whirlpool water heater a few years back and have had nothing but headaches replacing the thermocouple every 1 to 3 months. The last one only lasted for 4 days. I did have a small flood in my basement well after the problems began. There are no visible signs of water damage to the unit, but Whirlpool has dropped my warranty completely. They sounded like they intend on not helping me anyway.

I am very happy with my Whirlpool appliance- oven. Ive had it for almost 5 years, with hardly any issues. -Its very user-friendly when I need to program any cooking instructions. Both the elements & the actual oven cook everything to a perfect.

What happened to the Whirlpool Corporation that we grew up with? I purchased a Cabrio Washer on 8-29-11. Here it is, 4-24-13 and the transmission is shot. Two loads of clothes were ruined and sensors went bad. All in all, over $500 to repair it. I called the customer service line, what a joke - bad product and worse customer service. Not even and Im sorry. Well it is out from under warranty and when I buy something, I research it first, she said. Wow! Thanks Reena for all your care and concern. I dont know if Ill ever buy Whirlpool again.

We purchased Whirlpool AquaLift oven from Lowes 10 months ago. Since then, I dread each time I use the oven because I end up cleaning it by scrubbing and using different products because AquaLift cleaning is a scam. I have arthritis in my joints especially my neck, so cleaning it by sticking my head inside is a nightmare for me. I will try to call the company and see what is going to happen. I read that someone is suing Whirlpool for this product so hopefully they will recall the product or refund us if we return it.

I bought a Whirlpool range. After 15 months, I hadnt even paid it off yet the oven stopped working properly and then again after two years. These ranges are junk. Dont buy Whirlpool! They dont stand by the product either.

I bought the Whirlpool Duet front load washing machine. It was a piece of junk and I bought it 3 years ago. Sounds like a jet taking off during spin cycle and drain.Well, let me tell you, its terrible. It walks out of the space its in during spin all the time and the F Codes. Im done! Just replaced the pump and motor for the drain on the thing and unplugged it several times to reset it. Still is giving me F codes.Im done, I tell you! Done! This has been going on since we bought it!