Whirpool Cabrio Washer - Do not buy this washer. Clothes are not clean. They are twisted with residue still trapped in the wadded up mess. Even if you select deep water clean, your clothes will still have the same dirty marks on them as when they went in. Also, there is no spin cycle. If youve got a bunch of wet towels you just want to spin the water out, you can forget it. You will have to do a complete wash. And the 1 star is not even appropriate but there is no choice of a big fat zero. Wasted a lot of money on this when Ive had great luck with Kenmore.

Purchased a new Jenn-Air JCD2295KES in 2007 when we remodeled our Kitchen. Its been a decent fridge. When it quit a couple of weeks ago, I had the repairman come. He informed me that the HV circuit board was bad and sorry but they dont make them anymore. What, a 7yr. old fridge and thats it? I sort of expect things to have to be repaired or maintained but to have to throw it away because Whirlpool chose not to carry the parts any longer. I decided to scour the net and see if I could find this legendary board. Lot of places seemed to have carried it but could no longer get it from Whirlpool. I found a place that could supposedly repair them but after a few days, they called and said the microprocessor was not repairable.I contacted Whirlpool and they gave me a place that does obsolete parts and although helpful, I thought they were real opportunists and wanted to charge me considerably more for a reconditioned board that a new one would have cost if I could find one. I kept looking on the internet to no avail and when I called Whirlpool again I was getting pretty upset. Here I am with a 7-year old refrigerator and cant get parts for it, thats just not right. They were pleasant but basically their stand was sorry, theres nothing we can do. I told them that I bought a lot of appliances as I have quite a few rental properties. I cant throw an appliance away just because I cant get a part. It just doesnt make sense. I feel Whirlpool/Jenn-Air simply doesnt care. Im not interested in their excuses, I just want parts. I dont think it is unreasonable to expect to be able to obtain parts for at least a dozen years or maybe even a little more.I posed the question to them. Would you buy a $2000 refrigerator if you knew it would only run 7 years? The customer rep. said no she wouldnt. Well, Whirlpool, neither will I. I was unimpressed with their lackluster response and offer of a $300 rebate on a new fridge. I can find better deals than that on my own. I have purchased many appliance and always actually liked the Whirlpool line but Ill not buy any of them again. Shame on you Whirlpool for letting your customers down. Just because you can ignore me, doesnt mean you should. Im in business and I would go to the ends of the earth for a customer to make them happy. No wonder the Asian companies are kicking butt on the so-called American manufacturers. If your not going to get service you might as well go for the cheap price.On a final note, I did after two weeks of searching find a board hidden in a little appliance repair shop in Colorado. It should arrive here tomorrow and was priced $150 less than the reconditioned board that the gougers Whirlpool recommended. I believe it is the last board on the planet. Hopefully it will get my fridge another 7 years down the road and by then Whirlpool and its subsidiaries will have been sucked up by foreign companies and under a different label.

I bought a new Whirlpool fridge that has been a piece of junk since the day I bought it. The minute the warranty expired. The thing broke down. The corporate service center was a joke. 15 min wait time just to get through. Then a runaround of misinformed referral numbers. Minimum charge $200/30 min just to have a service rep even look at it. And then $100/hour + parts after that. Highway robbery. My doctor doesn’t even charge me that much. I will never buy a piece of junk WP product ever again. Their customer service is rude and non-existent. The company does not stand behind its products. Don’t buy!

My new washer is very inefficient. Clothes do not come clean and come out very wet. The cold water only rinse is not an environmental feature... clothes come out so wrinkled that instead of hanging them to dry as I used to (after shaking out the few wrinkles from a warm water rinse in the old washer) I now have use the dryer. This makes no sense to me... I wish I had spent half of the price of this new washer and had the old one repaired... at least then my clothes would come out clean.

I bought a Cabrio washer in late 2015. All Ive had is trouble with this joke of a product. After three years it wont do any cycle, the people at Whirlpool dont care. Please dont buy any Whirlpool product.

I bought a new Whirlpool refrigerator from Sears and within a month the refrigerator side did not maintain temperature where milk would not spoil... Cool but never cold. I called Sears and they said its Whirlpool warranty to contact them. This I did and about a week later they contacted a local service company they use to maintain their equipment... Long story short this will be the 4th time they were informed the refrigerator still doesnt maintain temperature... Food had to be thrown out because of that.I asked them to refund me my cost or at minimum get a working refrigerator to me because after 4 attempts at trying to fix the problem it still exists... They just want to keep sending a repairman out there who still cant figure out the problem and that has cost me much time away from work not the mention the spoiled food costs... Even when complaining my dilemma to the repairman he said, All they will do is keep calling us and kick the can down the road... They could care less about what it has cost me in time and money... I had to give 1 star to this company but they dont deserve even that one... Dont waste you time thinking a warranty by them is worth a flip and now over 3 months Im without a refrigerator...

Our microwave is less than 8 months old, hardly used and only for heating items. Besides the point, being under a year old. It began to make noise and pop, spark sounds with the smell of burning wires and promptly stopped working. We called the customer service line and began the long frustrating circle of completely bizarre conversation. Maintaining our belief this is a fire hazard and not wanting it in our home they insist on a repair person coming after trying to sell us Extended warranty, Why would we want Extended warranty when the warranty is NO warranty, it seems, whatsoever. After requesting to speak to a supervisor 3 times. A overly bubbly person comes on the repeat same spiel and to make an appointment for 1 week away from 8am to 4pm to be available for a phone call to make an appointment to see about repair on said fire hazard microwave that is less than a year old. This appointment is made with repair place and they too are confused and noted Whirlpool said this is not covered under warranty, and they too would contact them.Today Whirlpool Canada calls and gives number to repair place to book appointment, Hello we already have one and the frustrating verbal dance continues. 5 minutes after this call the repair place calls, as whirlpool contacted them as well to book appointment, which we both could agree this is the bizarrest situation since we already have an appointment, from their appointment. We keep saying we feel unsafe, this is a fire hazard. Which they completely ignore. This is unacceptable and extremely poor service.

18 months old, fridge was not cooling properly. Two service people came including the last one from Whirlpool, said the cooling system is bad and unserviceable. Called whirlpool and they were not helpful at all.

I purchased the washer 1.5 years ago. At about 9 months, the latch was in need of replacing. The washer was locked and would not unlock. That was fixed. Fast forward to 1.5 years old and the control board needs replacing. The washer stopped in the midst of a cycle, filled with water. The repairs are over $400 -- nearly the price of a new washer. Ive never had a washer to go out on me. I willingly gave away my previous washer for the purchase of a newer model and did not expect this fiasco. I will recommend against purchasing a Whirlpool washer.

Too many times my clothing comes out dirtier than what it was going in... Sometimes my clothes come out dry in spots, never washed, lint and white soap spots on clothing as if never washed after a whole cycle. Huge waste of money and time. Cant trust any positive reviews about Whirlpool, they have to be rigged!!! I will never purchase another Whirlpool product again.

The technician that was here to repair my propane water heater called Whirlpool to get help with the problem. The pilot would not stay lit, they would not help him. I told him it was installed in a mobile home and he had to cap the gas to the heater, it was still under warranty. Later I found out there was a recall on this heater and that probably was the reason they told him that. I ordered a water heater just for mobiles and am in the process of getting it installed. I kept the old heater for now and will still pursue this issue under the warranty.

I initially purchased all new Whirlpool products as part of my new home purchase in a Pulte subdivision, June, 2011. My WP microwave failed to heat in 2012 and the replacement of the Magnetron and Inverter and service was covered under warranty (would have cost me $493.51). Sadly, the microwave again failed to heat in 2014. I was so disgusted with this second failure, I decided to live without a MW until January, 2016 when I paid for my second service call and learned, once again, I needed a replacement Magnetron and Inverter, to the tune of $400. Both servicemen told me the 2011 magnetron/ inverter mechanisms were new technology and did not last long. Again, sadly, when I contacted Whirlpool, they would not admit to their defective product line and indicated they could do nothing since I am out of warranty. It is unconscionable that a corporation is not liable for their defective products.

Bought this fridge at Best Buy because it was beautiful and thought it would go perfect in my new home. We allowed the fridge to regulate for 72 hours (even though it only needs 24) and it didnt cool properly or make ice. 3 calls later to the 800 number (along with three scheduled repair visits) and Im getting the run-around. 1st excuse was that I needed to order parts. 2nd excuse was that it was a bad sensor due to the manufacturer. The 3rd excuse was that the fridge door wasnt aligned properly, thus not sealing properly and not allowing the fridge to regulate, which causes it to freeze over. My ice maker also hasnt worked once in this entire ordeal. The issue still isnt resolved and I am vowing to never spend thousands of dollars on this brand again. Spare yourself the headache and go with a less glitzy, more trusted brand.

Please do not buy any Whirlpool product. Worst product and customer support. I got a new refrigerator on dec 2020, just after 1 month I started facing issues. I complained about that and 3 times they changed many parts. Still I am facing same issues. It doesn’t cool, makes too much sound. Every time I have to spend 30 mins in registering a complaint and sometimes they just close it on their own without even attending to it. So weird. Though the product is under warranty, it’s been more than 6 months that nobody has rectified the complaint. Even now my complaint is still pending. If I call customer support, they just provide some number and ask me to call them. Service representatives take their own time and not at all Serious about complaints. This kind of service they provide to customers. Beware of buying whirlpool products. Worst ever products and service.

Im very happy with my Whirlpool washer and dryer. The washer leaves the clothes clean and has a variety of wash cycles and water levels and is quiet. The dryer also has a variety of drying selections for all clothes and heavy loads and its very quiet.

We had to buy a new fridge in 2000 because ours broke. Following consumer reports, we went with a side-by-side Whirlpool gold and was it pricey! Within the first five years of its life, we had to replace the fan twice...the bar that separates the fridge and freezer could have fried an egg--it was so hot! When I had to replace it the second time, I pitched a fit to Whirlpool and they could care less! Now I see that the inside wall of the fridge section has cracks forming! I know the average lifespan is 10-15 years but I still will say that I will not buy from Whirlpool anymore! Their stuff is very expensive and it just seems it has too many small things that do not hold up!

I bought this washer thinking it would last me for a long time. And now it wont wring out my clothes and I just wanted to say I am disappointed in my Cabrio Washer.

Do not buy a Whirlpool refrigerator. This is the 3rd time I have to call in repair for the ice maker in 4 years. Water poured out on my floor for the 3rd time ruining my floors. Called Whirlpool and said there is nothing they can do to help me. They don’t care about their Customers! I could have bought a new one by now based on repair costs. They don’t back their products. I’m really annoyed now!

Called Whirlpool customer care for help with identifying make and model number of a slide-in, ceramic cook-top range (one of their popular brands). The representative was cordial, patient and very helpful when it came to giving me directions on how to locate make/model information on the unit. That was until I let her know about a recent problem with the stove. The edge of the cooktop is much too sharp! My hand got cut while wiping down the stove top/adjacent counter. Although Ive had the stove for a while, Id never had that happen before; thats probably because I used a thin rag this time around to do the cleaning. I asked the rep if anyone else had reported getting cut by the stove top. She said, No. I let her know that my goal was to just them know about the situation, because such a sharp edge on a cooktop is a safety issue. She disagreed. But what could or should she have said? In all fairness, it came down to balancing loyalty to the company with genuine care for the customer.I do appreciate how kind she was in communicating with me, but am very displeased that once Id shared about the problem she seemed rather dismissive of the situation. How could the risk of being cut NOT be a product safety issue??? If you visit the Consumer Products Safety Commission website, you can see where risk of laceration is a reason some products are recalled. Based on that understanding, I would say that sharp edges on a ceramic cooktop IS a safety issue!

Absolute junk. Bought an entire matching set 2 years ago. Fridge, microwave, dishwasher and oven. Oven is the most user unfriendly thing I have ever bought. That’s my fault. Microwave failed. 300 to replace. Ice maker in side by side fridge failed, another 300 dollar fix. I used to have a field mouse or two get into the house every year. Don’t have that problem anymore because the fridge is so loud it scares them off. Talking to Customer service was the most frustrating thing of all. They think if they say your name in a nice soft tone long enough it will make everything ok. Mother and father raved about Whirlpool products. How times have changed. Do yourself a favor and steer clear of these products. Also, look up the other brand names made in the same factory and steer clear of those as well. I used to think appliances were all the same. How wrong I was. Do your research. It will save you a bundle in the long run.

Sent an e-mail to Whirlpool. They responded with apology. Sent a second e-mail telling them they should be paying the $300 for circuit board in a two-year-old range. No response. Also, sent e-mail to Geniers. No response. The impression I get is that neither are the least bit interested in the problem. Once they sold the $1260 range, they were done. We will never buy another Whirlpool from any store and we wont buy anything from Geniers in the future.

WRX735SDBM02 - I purchase this new WP refrigerator on 7/9/16 from Home Depot. It has been repaired twice already and now the front control panel is chipping and peeling away. Whirlpool says this is cosmetic. I maintain that quality construction and material do NOT simply disintegrate spontaneously. I want the control panel fixed under warranty for manufacturing defects. This NEW refrigerator cannot stay in my home looking like this, it is unacceptable to me. Their customer service refuses to do anything. This was somewhat hard to photograph due to the reflection issue.

We purchased commercial washing machines for our building, we discovered that the clothes were coming out of the machines with dry spots and partials of soap. When we asked the dealer about this they sent a tech. to check the machines. It seems that these machines do not allow a adequate amount of water into the tub to wash the clothes. Only 6 or 7 inches of water is not enough water to wash a full load. When asked how this can be fixed I was told it cant be fixed. I was told this is a energy saving machine, which means you can only wash very small loads!What is the point of running a machine for twice the amount of time to do what you used to do in one load? Had we known this before purchasing what we felt was a quality machine, we are now stuck with machine not capable of doing what is required of them. When asked if they would take the machine back, no is all they say. I would never buy any product made by Whirlpool or Maytag because of the way this problem of ours has been handled. We purchased these machines from Prestige appliance, they have been good, but with no support from Whirlpool.

We purchased the Whirlpool Gold Gas Range (model #GW399LXUQ06) in November 2011. Last week, I noticed the porcelain enamel finish on the stove top grates has fallen off in pieces. I contacted Whirlpool today, February 14, 2012, about this issue and they advised me it is a cosmetic problem which is not covered under the warranty. They advised me that it would cost over $100 per grate to replace. We have had this stove for less than three months and I feel these grates are defective and Whirlpool should be responsible for replacing them. I am very dissatisfied with this stove.

Whirlpool WFE720H0AS0 - I tried to use the self cleaning oven feature and it cleaned the bottom of the stove but did nothing for the sides, back and door of stove. The top of the stove is impossible to keep clean. Maintaining this appliance is a full-time job. Very bad choice.

I purchased this washer (Whirlpool Cabrio HE) 2 years ago against the advise of many people including my husband due to the cost, $850 for what is now no more than a large paper weight! It had never really done a good job at cleaning our clothes. About 6 months ago, it started not spinning enough to remove all the water from the load. I thought, no big deal, I will just use the extra spin cycle. It became the normal thing - wash, spin, extra spin. Well, then it became wash, spin, extra spin, extra spin. I noticed 3 months ago that it was not even agitating. It fills up, sounds like it is agitating and then drains. There was no movement from inside at all. All along I am getting from my husband. told you not to buy it! I gave in and called the repairman - $185 for a console, $26 for a sensor and $55 for a couple of drum clips and then the $35/hour for the repairs. I would rather spend a couple hundred dollars and buy a washer with an agitator that really works. I would never recommend this washer to anyone!

Whirlpool Cabrio Platinum Washer - I have a 2 1/2 year old washer that has been serviced twice. This week 10/2/14 the service technician informed me that we had a bad tub bearing. The bearing failure caused a leak which corroded the rotor & stator. It was more cost effective to buy a new washer than to repair our unit!!!! Ive never heard of a washing machine needing to be totally replaced after 2 1/2 years. Any ideas how to deal with Whirlpool?

We purchased this dishwasher (Gold Dishwasher WDF60SADB) because of its low 49-decibel rating. It goes over 60 decibels regularly and occasionally up to 70 during operation (not including drain noises which cannot be controlled by the dishwasher). We used a tablet app to confirm. Decibels are not linear, they are exponential. 70 decibels is what your average shower or dishwasher sounds like. 50 is about as quiet as a refrigerator. You have to talk over this dishwasher. And yes there was a big price difference between it and Whirlpools next loudest rated washer.Whirlpools customer service says they will not replace or repair based on sound ever, only for functional failure. Bottom line, dont pay any attention to Whirlpool sound ratings. They dont stand by them and do not consider gross overages a defect. Fortunately the retailer (Lowes) does stand by what they sell and will trade for any other machine by any other manufacturer. We have only good things to say about Lowes in this process. This machine arrived Wednesday, and we pick a replacement Sunday. It will not be a Whirlpool. I will never buy a Whirlpool anything again. We said it will do X but we dont care if a brand new one wont is no way to do business.

After seven long years of one issue after another, about once a year replacing one part after another, draining the unit to replace parts, waking up to cold water, I finally gave up and replaced this Whirlpool water heater, model model # FD1H4040T3ENOV unit. Never to buy a Whirlpool unit again. Thanks for the memories.

My refrigerator was purchased in May 2014, and died in August 2015. Before it died, it produced a very loud, rattling noise for two days. Thus, the refrigerator cost me $100/month. It does seem, upon reflection, I would have been better off buying a piece of junk for $50. It would have lasted longer. Additionally, the so-called stainless steel started rusting all over the front surface, first popping up in one spot, then another. One year old, rusty and dead. Great job Whirlpool. Buy American.

Whirlpool provides free replacement parts to repair this design problem but wont pay the service charges to repair their design problem. I purchased a KitchenAid french door style refrigerator (KBFS25EWMS10, SN K31902118) and it leaks water on the kitchen floor. At first I just mopped it up but later discovered they have a design problem in their drain system and water backs up into the freezer dept and eventually on to the floor. Customer Service provides free improved replacement parts for this design problem but wont pay the service charges to have the parts replaced. Simply put, Whirlpool/KitchenAid do not stand behind their product quality, instead they pass the problem and service charge cost for their design problem on to the consumer. Beware of this appliance supplier!

Refrigerator Model ED5FVGXWSO2 - After owning it for a couple of years, we decided to do a super cleaning and remove all the shelves. When we took the shelves out, I noticed that the plastic support tracks were all cracked. I called and complained to Whirlpool and of course the fridge was out of warranty but heres the good part - The person on the phone asked me Did you put heavy things on the shelves? OMG My response, trying to think of the heaviest thing possible, was, Like milk cartons and juice? She even said There was likely a bad batch of plastic when the shelves were made. I was a big fan of Whirlpool. Great value etc. but I will never buy from them again. Shelves should last the life of the fridge!

I paid about $400 for this dishwasher and the regular price was over $600. Got a good deal. It washed dishes wonderfully. All I had to do was scrape the chunks off. It cleaned the rest. BUT... at a certain point, it started NOT cleaning. It was only about 6-7 months old. It was to the point where everything just came out kind of slimy and food grit was re-deposited on the dishes. I cleaned both filters. I made sure there was enough Rinse-Aid all the time. I ran hot water in the sink before starting to make sure the temp was hot enough. My husband went online and someone had instructions about cleaning the water intake because it could sometimes have sediment buildup. Not a difficult process, but there was no gunk in the intake filter. When I listened to a load it seemed like it drained, (most start with that), paused, rinsed for a couple minutes, paused, drained, paused and refilled for the wash cycle. So the pump worked, the arms went round and sprayed. Nothing was in the way of the arms. After it started the wash cycle, it seemed to just stall. It would spray for about a minute and then stop. Im not sure it sprayed after that. The timer kept counting down. It said dishes were clean, but it was an absolute waste of time. I was ready to go buy a cheap dishwasher and throw this one in the dumpster. I think it is a 720 padm??Just after my husband checked the water intake filter, we started another cycle. When it was rinsing, he opened it up and everything seemed to be working ok. It drained, then filled and started the washing cycle and then stopped. He opened it back up and surprise, the water was full on the front level by the float (that turns the water filling off). But in the back of the dishwasher, there was only about an 8th of an inch of water. Online it said the water should fill to just about the top of the heating element. It WASNT. Problem? It wasnt LEVEL. The instructions when installing said it should be leveled. We did when installing it (when it worked great). But looking back, we put in a new hardwood floor about the time it stopped working ok and we didnt put 2 and 2 together. We did not re-level. When we pushed the dishwasher back into its built in cabinet, it must have gotten OUT of level.The rinse part worked I guess. Then it drained and re-filled. After re-leveling the dishwasher, we opened the door at that point. The water was a level depth front to back and side to side. My husband explained what he thought had been the problem to me. When the wash cycle starts it fills, the float shuts off the water at the appropriate level. THEN... the dishwasher starts to pump and fill the arms and the tube up the back that feeds the upper washing arm. So much water goes into the arms and up that tube, the dishwasher looked almost empty of water again. As the dishwasher was now level, it began adding water to compensate for the arm/tube filling. Before the float would shut off too soon because the front part of the tub was full but the back wasnt. Without enough water, the dishes were NEVER going to/COULDNT get clean.The re-leveling made sure that the float didnt turn off the water filling until there was much more water, the CORRECT amount. The next load cycled all the way through, spraying much more than Id heard before and the dishes were clean. P.S. I also got some dishwasher cleaner and used that on a couple empty cycles. I NOW LOVE this dishwasher again. FYI If my husband wasnt handy Id have junked this thing. We HAD leveled the dishwasher when we installed it. Just didnt realize it COULD get un-level just pulling it in and out of the cabinet to install new floors. Check out all the troubleshooting stuff in the manual. But if it doesnt help, put a level inside across the bottom rack, front to back and side to side and make sure the bubble is in the middle of the two lines.The previous dishwasher I had, just made like a fountain of water that went up the middle of the dishwasher into a sort of funnel filling the upper arm. THIS one has that tube up the back and it curls down under the filter and Im guessing it is more sensitive to being OFF LEVEL, because the tube doesnt go straight down, it curls and lays across the bottom of the tub. Without being level, there was never enough water to suck up that tube to start the the actual wash cycle and it just stalled there till the timer said clean at the end. IE: dishes never did wash. BUT IT DOES NOW! Woohooooo!

I am pleased with the steel tub, the ability to do an extra rinse and spin and especially the choices of water level that it determines by the size of the load. Its ability save water use. I would repurchase the top loader again. My clothes come out looking wonderful especially the whites and I do not use bleach. It does not get the mold or mildew odor that my last machine would get due to the rubber or plastic made tub. I love it.

I bought a Whirlpool duet washer and dryer. These appliances are still under one-year warrantee. My washing machine was broken for four weeks, and they have been unable to receive all of the parts needed to repair it. They have made three appointments to fix the machine, telling me that they have the parts and only to cancel the appointment the night before. I have tried to get Pacific Sales to exchange the broken machine, but they will not do that or compensate in any way. This is a top of the line model; I would have been better off with a low-priced model, and I might actually have a machine that worked. Whirlpool supposedly had the parts on back order, which is not what Whirlpool informed me when I was able to reach them.

We bought a new Whirlpool side by side, model # WRS325FNAM00 in March 2014. In less than 48 hours, the freezer box was condensing and water was leaking on the bottom edge. The condensation got worse and worse. Five service calls later, Whirlpool replaced the freezer door--which took six weeks because it had to be manufactured.After the door was installed--no change. Whirlpool replaced the entire refrigerator in June. Guess what? The new one is doing exactly the same thing in exactly the same place. So far it has not gotten worse. Well see, we have only had it a week. But already the service rep has been out to the house and added the silicone gunk to the box in case there is a tiny air leak. Why would a brand new refrigerator have an air leak in the freezer box?

We purchased a new Whirlpool Cabrio Platinum W10405142B washer and dryer just over 3 years ago. We decided to go back to the top load as we were having so many issues with odor from our front load. We purchased the set at a Sears store in Timmins Ontario and we’re quite confident that we were getting an excellent product. From day 1 we have had issues with having to rewash our clothes. We have lint and white streaks on the clothes as if we were using powdered detergent and they are all tangled. We have always used HE liquid and at one point I switched to soap nuts to get rid of using chemicals. We have now changed to pods and still have issues. When the washer is spinning it is deafening. You can hear it outside for goodness sakes. It sounds like it is about to take off and fly.The cycles are ridiculously long. For a quick cycle the other day and a very small load it took 72 minutes... how is that quick? When the wash is done my clothes are all tangled up and are stretching things out of shape. I am careful what goes in my washer and how large my load is. I know not to wash sheets or towels when I am not home as they will eventually be unbalanced and have Sat all day in the washer only to have another hour of washing when I get home. We are currently doing some work in our home and pulled out the washer. The floor has a rust circle from God knows what. I will attach a picture. The lid not longer closes. I have to hold it down until it locks and it still pops up a wee bit.I do not understand why I am responsible for purchasing a new set when the product I bought should have lasted and not caused damage to my clothes or my flooring. How do we as consumers make the manufacturers responsible for things like this. If nothing else the appliances should be removed from my home by the Company and I should be reimbursed for damages and the cost of a new set. I will continue to look for my receipt as I keep everything and I am unsure what is meant by order #.

Bought a new Cabrio, worked ok but in less than 2 yrs the bearing is bad. It will cost almost as much to repair as a new washer. Will never buy a Whirlpool product again. Would give negative rate!

I regret buying this washer. No complaint about the dryer but this washer has been the worst investment I have ever made. My clothes gets tangled up - seems like theyre not as clean as with my old washer which by the way I still have. I wanted a bigger set because I hated spending days off doing laundry but I spend as much time rewashing again and getting clothes untangled.

When renovating my kitchen I went with all Whirlpool appliance. I have nothing but trouble with my fridge. About a year old we had to replace the motherboard at our expense. After having that done, about 6 months later I had to defrost it so it would work again. Now it has to be done every month. All they say we can book another service call at my expense again. All I say thank goodness I kept my old Frigidaire. It saved me more than once. So my advice is stay away from Whirlpool. They dont stand behind their products from my experience.

Inconsistent freezer and frig temperatures, with vegetables and fruits freezing in the fridge, even when temperature is properly set. Freezer control knob and vents too easily blocked. Unit is very noisy.

I have both Whirlpool washer and dryer. These are my second set. Whirlpool is reliable & long running. I love this brand! My dryer is six years old and the washing machine is nine years old. Never a problem and they do about six loads a week.

The stove is okay except it scratches on its glass surface fairly easy with the non-stick pans. Also wished it had a self-cleaning oven. Its not the easiest to clean on the inside of the oven. The knobs are easy to use but its hard to navigate knobs to low to keep food warm rather than cooking at a low temperature. It has strong exhaust fan that really does its job.

I paid over $1,000.00 for a washer based upon previous experience with Whirlpool appliances. I am single, over 65, and use this machine infrequently, as compared to when I had children. The only thing Whirlpool is offering is another of their machines at a discounted price. I value principles more than dollars. I refuse to give them another $600+ as a reward for making junk which apparently should have been recalled. The part I need is not available any place Ive found online. And it completely controls the power to the machine. You cannot open the door, you cannot turn it on. I had two service calls to discover this part is not available.

This machine has been very reliable. We have had since 2001 and have had not issues, Im really not sure on how clean our clothes are. Sometimes they have a odor but this is common with front load washers. I leave the door open and put baking soda into the machine regularly. Also clean the rubber seal because mold will accumulating on it.

After purchasing 3 whirlpool items in the last 4 years and 2 of them breaking down a dryer last year, and my water heater today. I no longer have faith in your products. I am disabled and was a whirlpool customer, but after my recent experience with your failing products, I will not be purchasing any more! Its great your willing to send the parts for the water heater but, it costs $65 to have them installed. I bought from you because you had a quality item and obviously that is no longer true. Contact me if you still want me as a customer.

Late on the evening of Monday, January 27, 2014, after springing a leak in my 8-year-old water heater, I purchased a new Whirlpool model N50T61 replacement from Lowes. Installation went smoothly and the unit lit off fine the first time. It heated the initial tank of water rather quickly, but the next morning, I noticed the status light on the control unit was not blinking, which indicated the pilot light had gone out. I relit the pilot light, the water heater fired off and appeared to be working properly. 12 hours later, the status light was out again. I relit the pilot, but within 20 minutes, it went out again.On Wednesday, the 29th, I called Whirlpool customer service and explained to the representative what had been happening. He stated that since the status light was not blinking a code, the problem was either an air supply or venting problem, and he couldnt help me. I relit the water heater again and performed the match smoke test described in the owners manual on the vent connection. It did exactly what the manual said it should do, so I assumed that was not the problem. However, while performing this test, the water heater went out again. This time, being right there when it shut off, I saw the status light blink twice about 5 or 6 times before it quit blinking all together. The two blink error code indicated low millivolt signal from thermopile.I called customer service again and explained to the representative what the first person had told me and also told him the results of my test and that this time, I had observed the two blink error code. He asked if I had a multimeter (which I do), so he had me disconnect the wires for the thermopile, connect the meter to the wires, light the pilot and read the voltage. My meter is an old analog unit, and not capable of reading millivolts (which is what the thermopile output is), and I informed the rep of this, but he had me do it anyway. As I suspected, I saw absolutely no reading on the meter. The service rep stated that he believed the error code and decided to send me a new thermopile assembly. However, their shipping department was closed for the day and I should not expect to see the new part until Friday. This was unacceptable, but he stated that this was the only option available to me.After thinking about this situation for a while, I again called Whirlpool customer service and told the representative that I was not satisfied with the solution previously presented to me and that I wanted a return authorization to take the water heater back to Lowes for replacement. The rep stated he couldnt do that, but said that there were a couple other things I could try. He attempted to explain these procedures to me, but wasnt able to do so clearly. He stated he would email the instructions to me. As of this writing, I still have not received the instructions.In the meantime, I did some internet research and found that Whirlpool water heaters have numerous chronic problems, including the issues I was experiencing. I decided this was not a product I cared to own. I called the Lowes store where I purchased the water heater and spoke with the manager. I explained the entire sequence of events to him, and he told me to bring the water heater back for a full refund. Since my local Lowes store only sells the Whirlpool brand, I took the money and purchased a different brand of water heater from another home improvement store. Needless to say, it will be a cold day in hell before I ever purchase another Whirlpool product.

I took the Sears salesmans suggestion and bought a high-end quiet dishwasher. It worked wonderfully until it sprung a major leak. Computer told me the phone # to call. It took a week for the Sears repairman to come out and $79 fee to just look at it. He said the fitting between the sump and the pump came off and flooded water over the electric motor. Electric motor is shot! Cost to repair is over $400 and a 3-week wait!!! When and if a new motor is installed, only then do we know if the computer is also fried. This was a high-end dishwasher. Factory warranty just ran out. Repairman said this is a common problem with this model. DO NOT BUY THIS MODEL.

I bought this nightmare machine one year ago, and stop working. If I try to program a cycle it put itself lock so I can not use or program any cycle. I can not open the door and start a noise like it was draining without clothes at all. And when finally it ends, the machine is like dead, no works, no programs no nothing. I am sick of this appliance. It is almost new and just does not work as it should be. But the worst is customer service, OMG. They lie about everything. The technician came to see what was the problem and told me it was the card, so he could not do anything until the factory send the piece to the place where I live. Well this happened one month ago and I am still waiting for the service. My guarantee was still on time, but every day at customer service they have a excuse/lie that the piece is on my way and service will be completed. Well I am still waiting and nothing happens. I am desperate. No one cares about the customer. If I would have known or read the bad reviews about these washing machines I would have never bought it. I got it at Walmart. I regret deeply. I do not know where or what else to do. Nobody cares or listen. Shame on you Whirlpool.

Please do yourself a favor and stay away from both Whirlpool and this unit. I purchased it from a local dealership and paid $881.00 which included tax and delivery cost. In less than 2 years, it broke. Whirlpool does not offer a warranty on the unit. After having a Whirlpool repair person come out for a cost of $75.00, I was informed that the parts to replace would cost $800.00 not counting additional labor cost which was TBD. I contacted Whirlpool and went from Agent (Phylicia) to supervisor (Ashley) to Manager (Carol **). The best offer I was given was to buy the parts at a discount of $400.00 which did not include tax, delivery or labor. So it would have run approx. $550.00 to over $600.00 to fix a $771.00 washer.My next letter is to Jeff Fettig (553 Benson Rd, Benton Harbor, MI 49022/ CIO of Whirlpool) to let him know how impressed I am with his product and customer service support. The next Whirlpool item I buy will be never. Take this as a word of warning to go Maytag or any other vendor because Whirlpool will not support you once the sale has been completed. Good Luck.

I bought a Whirlpool gold model #GB2F-1DXW507 / k27711376 when we remodeled our kitchen in October 2012. After a couple months I noticed water on my floor, then in the bottom of the freezer. I called Lowe’s. They sent out a repairman. He said it was a flaw in the design and put the redesigned part in. When they delivered the fridge they changed the door to a left hand open and it was never right. After 2 years the ice maker stopped working. I just started buying ice. Today 5 years and 5 months later they said it will cost me almost $500.00 to fix the electric board and the Ice maker. The fridge stopped working would not get cold. And the certified Whirlpool repairman said it was a very good looking fridge and he would fix it with a 90 day warranty on the genuine Whirlpool parts for almost $500.00. I said I wasnt a idiot. Why would I spend that kind of money for JUNK. After reading some reviews I think Whirlpool knows just what junk they are selling. I called and all they said was, “Thats too bad. We will take it under advisement.” I bought mine 1st then 1 year later my sister and sister-in-law bought theirs. 3 fridges with all the same leaking issues. I hope they dont end up with all the same problems.

The Cabrio washing machine I was told by salesman best made so I spent big $$, makes sense right?! Wrong! During spin cycles sounds like jet plane taking off, was told barrings or drive shaft is at fault cause water seeping inside, causing rust, Whirlpool didn’t seal it or designed it to ensure no seepage. Never again Whirlpool. I’m done with your ineptitude, Type: 580. mod. WTW6500WW1. Set.# CY4970595.

I absolutely hate my Whirlpool refrigerator! The first day I had it, the cover to the deli drawer fell off and cracked because it wouldnt stay on. I called the company and they sent me a new one but it immediately fell off and broke also. It is just a terrible design. The plastic slots dont fit correctly and it just doesnt stay on.Then, a few months after owning the fridge, I notice rust spots on the bottom drawer. I called the company and a rep told me to buy dishwasher cleaner and a magic eraser and use that to scrub the rust off. She insisted that it must be near humidity. I explained that my GE stove and dishwasher, along with other stainless steel in my kitchen have never rusted. The Whirlpool company provided no help whatsoever and does not back up their warranty. I would never purchase another Whirlpool appliance after this experience. Now I am stuck with a fridge that has rust stains and a broken door.

I have a lower end 4 burner model but I love it. Both power burns are in the front (I would change that) and electronic ignition. The oven temp is true and heats up quickly, I bake upwards of 700 cookies at Christmas time. Even being a lower end model it works great and I use it everyday. I think it is more energy efficient than the model that I replaced, which I replaced in order to have the electronic ignition. I would recommend this Whirlpool Range!

Purchased this dishwasher in 2015. It has been horrible. The unit has never cleaned sufficiently on any cycle. I run the unit in the evening for the full cycle with heat. It takes almost 4 hours. The dishes are still soaking wet the next morning. We would be considered light use as a family of two. I hand wash any larger pans or cookware as the racks do not support anything of midrange weight or above.With the poor cleaning, I purchased a additional silverware rack and placed it more centrally to attempt better cleaning. It remains mediocre at best. The most recent irritation is the door latch has started pulling free from the unit and remains attached to the door! I have to take pliers and remove it from the door and reaffix it into the housing of the unit. Will never recommend this nor will I ever purchase anything from this company in the future. Sad to see the quality falter to the point of absolute failure.

I bought the most deluxe and expensive washer and dryer I have ever owned. It is a Whirlpool Cabrio. The clothes come out of the washer dry, and all tangled up. I bought it new from Sears on July 2009. Now only two years old, and the washer sounds like a jet plane. I paid a repairman $90.00 only to be told this is common in this machine. The repair is expensive, and I would be better off buying a new one! I owned a cheap, little GE washer, which cost me $300; ten years, and never had a problem. Now my dream machine turned out to be a piece of crap. I will never buy a Whirlpool again!

After 1 year, my fridges plastic interior wall/liner started cracking everywhere. One crack is right across the entire back wall; other smaller cracks are on the sides and back. Three fridge shelves literally fell apart: pieces fell off! The glue came undone on the sides of the shelf that hold the glass in. Pieces of the shelf itself were falling out of the fridge. The microwave door has plastic trim around the glass on the door, and it is cracking also. It seems that anything that was made Whirlpool and is plastic is cracking and/or disintegrating. Sears caulked the cracks in the fridge and is replacing the shelves, but nothing is being done about the microwave. Whirlpool said, Too bad. Go to Sears. We may have made the product, but Sears is responsible. And Sears is saying Too bad; weve done all we can.

This machine is JUNK and in need of a recall!! DO NOT BUY!!! This was purchased at Lowes for nearly $800 a couple of years ago and what a waste of money. During the first year, they had to send out a tech that told me he was not familiar with top loaders and was not sure why the clothes were not getting clean, nor why they came out with a white residue on the dark clothes. We used the machine cleaner - which the cycles take nearly an hour (how is that efficient?), put in a load of dark clothes WITH NO SOAP and guess what? Then he had me dump in a gallon of vinegar to clean the tub and the wall of the washer and repeated the process and guess what? He informed me that it was just lint. Well, after several visits and using a suggested pin drop of soap, the problem remained. I finally asked him if he was so sure it was lint and not soap residue, would he be willing to taste the lint? It was soap.Obviously after an hour of washing in the efficient washer, the clothes are not getting rinsed. I know this because in just putting in less than ten dark t-shirts, they came out dry!!! He informed me that since he was a contractor for Whirlpool, he was not allowed to continue to come back as he resolved the problem that I was using too much soap! Well, that is only part of the problem. This piece of crap leaks. We not only have a water softener, but a household filter system. In just the last three months, we have replaced the hoses as they are corroding. We were informed by Lowes that the hoses that came with the washers were from China and that they have been replacing them with US made hoses to the customers at no charge due to the amount of returns. Well, those too have been corroding and now I once again have water on the floor.It cost $1.75 to take my clothes to the Laundromat, 26 minutes to wash and ten minutes to get there and back. That is what I have been doing, and using my 23 year old dryer when I get home. It is a shame that the company is not responding to an obvious problem. I only wash two loads in a week - not like I am beating the thing to death with numerous loads or heavy loads. I will not recommend, in fact, I BEG you not to spend your hard earned money on this junk. Buy a $200 washer and if it too craps out in three, four or five years... you are still ahead. You will even save money on headache medication and save your sanity.

Cabrio - In Dec 2013: Ran the Clean washer cycle and it would not cut off. I had to shut off manually. Called the company and they sent a technician, who said he fixed it and that everything was good. Fast forward to Feb 2015: Tried cleaning the washer again. When I left the house there were 10 minutes left in the cycle. When I arrived home 7 hrs later, the washer was still running and my hot water heater had cut off. I had to reset via the circuit breaker. This will be my last Whirlpool appliance for a long while.

I purchased a 50-Gallon Electric Water heater in 2006, sure it lasted and worked well for quite a few years; however, in August 2014 my power bill started to rise dramatically, I live in Arizona and $300-$400 power bills are the norm in the summer months; however, a $700.00 bill will immediately be noticed. I contacted the power company and they sent a tech over who performed a lengthy diagnostic and determined that my water heater was running constantly thus accounting for the great increase in power, I contacted Whirlpool and received 2 heating elements (no charge) which my pricey plumber replaced.The problem still remained and I contacted Whirlpool again and again trying to get this issue resolved. I paid less than $400.00 for the heater installed and since Ive been having the issue Ive almost paid another $400.00 in labor costs trying to get a resolution. Ive decided to get another system and my only reason for posting this is to inform all that the Whirlpool heaters seem to be very problematic, like others Ive had plumbers decline my business when I inform them that I have a Whirlpool tank with the Energy Smart module.

After having an expensive front loader (ugh) we purchased the Whirlpool Cabrio top loader (wow)! Best washer ever owned, wouldn’t trade it for any on the market! It has been as great and problem free as the front loader was terrible with cleaning and smell.

I purchased a Whirlpool microwave in November 2011 from BestBuy.com. The microwaves handle is coming apart. Best Buy wont honor because I didnt purchase the Geek policy. One year warranty is still valid, but Whirlpool claims that a door handle falling apart is cosmetic. Serial number TR14430004, model number MH3205XVS-2.

We bought the Whirlpool Duet set for $1,000 18 months ago. About four months ago, it started shredding our clothes. I would get them out with holes in them, but there was nothing sharp in the washer. Then the grey outside seal started deteriorating and getting tiny balls of rubber all over my clothes, ruining several white shirts. It always smells like mold. I just went to get my clothes out of it to find out it leaked water all over with that disintegrated rubber from the seal. The seal had completely ripped from the top to the bottom drain for no apparent reason. Now we are replacing the below. We JUST paid it off this month. It is crazy, it is already breaking!

We bought a duet washer and dryer about 3 1/2 years ago. In that time, we had many error codes that we had to research online and fix. We have replaced many things to date. However, this last code,F70, has really been the last straw. Basically you are better off buying a new washer and staying away from Whirlpool. We had a company tech come and diagnose the washer. This code says that its the interface board. The company has replace this board 3 times and the code is still coming up. They have basically replaced everything in our washer and the code remains the same. Nothing is fixing it. They have had Whirlpool-certified employees come in to look at the washer and are unable to fix it as well. They have been trying to fix it for 2 months. I called Whirlpool corporate office and they informed me that the company that we went with is not Whirlpool-certified, therefore the only thing they will do is either give us 15 % of our money back if we were to by a new washer, or we can have a certified dealer come out and diagnose it again. Well, that is just a waste of time. We already know whats wrong with it and would have to pay again to have it diagnosed or we totally loose a lot of money. I feel that Whirlpool really should stand behind their products, considering the price tags they have on them. They should last much longer than 3 1/2 years. I will not by another Whirlpool product again. Apparently, Whirlpool doesnt seem to care about loosing customers. I dont feel that they deserve any stars but it doesnt allow to pick a negative number.

I have a Whirlpool oven and dishwasher and have had nothing but problems with them both since day one! Our oven went out Christmas and couldnt get service on it and we were entertaining for Christmas. DONT EVER BUY A WHIRLPOOL PRODUCT!!! If you do you have no one to blame but yourself.

My refrigerator & dishwasher were purchased less than a year ago. Ive already had all the doors replaced on the fridge and the new ones are rusting. Discovered same issue with the dishwasher. The company doesnt seem to be overly concerned with remedying the issue. No sense of urgency or concern for the customer.

I bought this Whirlpool dishwasher 3 years ago and the first time I used it I was completely blown away. We can run it at night and never hear it. The first time I turned it on I had to go back and check it to make sure it was on.

The Whirpool refrigerator does exactly what its intended to do. It has no ice maker or water dispenser and thats just what I needed. But the plastic produce drawers do have some cracks because the quality of the plastic is not the best.

Purchased a Whirlpool Electric Range August 2015. Purchased it because it looked pretty and the Aqua Lift Cleaning feature sounded too good to be true. As it turned out it WAS too good to be true! I have just read a # of reviews about this range and I agree with all complaints. Does anyone like this range? The AquaLift cleaning technology is a joke! The baking temperature fluctuates & I could not figure out how to improve on that (for the longest time I thought it was just me not being able to figure out my new oven). The most serious concern however, happened a couple of weeks ago when I turned on the oven & immediately the oven started to smoke and an electrical smell permeated throughout the house. Had I started the oven and immediately left the house our house would no doubt have been destroyed by an explosion/fire.Phoned Whirlpool & because the problem was so serious they had a serviceman at our door within 2 days (yes I am being sarcastic, it did take 2 days). At no time did the call centre express any concern nor did they advise me to unplug the range and to make sure I did not use it. Obviously, I would not use it but shouldnt that be something they advise as part of the checklist talking points.Serviceman arrives 2 days later & advises us that the parts alone would cost $650.00 & oh yes the labour costs to install the parts would be charged by the minute. I didnt even ask him how much per minute because only an idiot would repair this piece of junk!! The power cord to the range had basically melted right through; you could scrape the char right off the cord. The computer part of the range was shot and had a strong electrical smell to it. The serviceman basically said that I shouldnt shoot the messenger and charged us 93.45 to tell us that it was going to be a very costly repair.I disliked this range almost immediately and was looking forward to the day when I would have an excuse to purchase another electrical range. I did not think I would be shopping for another range within 1 1/2 years from the time I purchased this piece of crap!!! Nor did I think that there would be a possibility that this appliance could potentially be hazardous to my family and home. How long is Whirlpool going to ignore all these customer complaints? This range should be recalled! It not only is selling features such as the Aqua Lift technology that do not work properly, it is selling a potential fire hazard.I will never again purchase any appliance that is made by Whirlpool. Whirlpool makes a lot of appliances and uses names such as Maytag, Amana. KitchenAid, etc. I have purchased another range and this one is made by Frigidaire (no connection whatsoever to Whirlpool). I dont know what my experience will be with my new Frigidaire Range but so far I am loving it! Hopefully, my new appliance will not nearly burn my house down. Whirlpool: Step up to the plate & take responsibility for the defective electrical range you are selling before there is serious harm to persons or property! THIS ELECTRIC RANGE NEEDS TO BE RECALLED - MODEL # YWFE715HDEHD.

I bought one of the top of the line Maytag washers and was very disappointed. It only lasted about 5 years and had to be replaced. The dryer I bought at the same time is still working. It is 15 years old.

Whirlpool Cabrio Purchased 12-7-2012 - what a piece of junk. Does not get clothes clean, rarely does she even spin out properly. Called because it kept walking across the basement floor. Informed that was the owners responsibility, not the store (Feidens in Latham). Always had good luck with them, bought all my appliances from them. Now I heard a loud bang and she threw up - water everywhere. What a mess.Had purchased special patio block at Home Depot to even her out and every time I used it which was not too often, it acted like the space shuttle ready to head down the runway! Not too happy with Feidens attitude with regard to this purchase. Not going to call them to fix it. Not an ready to pay to listen to their guff again. Expensive machine never worked well since it got here. I always wished for a Whirlpool, be careful what you wish for! Junk, nothing but junk. Only 3 years old and I only do laundry about every 3 or 4 weeks. Live alone, so she certainly was not overworked.

This is our 3rd repair in 13 months and now my 4 and 1/2 year old son and I both suffered bacterial food poisoning on this 3rd round. It has been a complete nightmare. Then we found out until last month, they were completely replacing the entire refrigerator. Then they stopped that and are just replacing the parts again. Now there is a back order of the parts and not to put any food in there or we will get sick again. The repair itself will take 4 hours whenever they get the parts in and another 1/2 day to take off work. We are building a house and have bought the entire gold series line of crap that is sitting in boxes in our garage. NOW WHAT WHIRLPOOL?

I bought my Whirlpool Cabrio Top Loading HE washing machine and dryer duo in February 2009. I carried an additional extra extended warranty for an extra 3 years. Now, at the dispenser where you add the bleach, it has rusted. The rust has gotten so bad the lid has detached from the body of the machine. I cant understand how a machine less than 4 years old could rust so badly. I called Whirlpool to complain and they suggested I get it repaired and my cost. A car that sits outside in rain, sun, snow and hail does not rust in 3 years. I bought the machines from Home Depot. The way Whirlpool has handled this, I will never buy another Whirlpool.

We bought the dishwasher on 12/28/11. It broke 4 weeks later. I had the company come out to fix it. 6 months later, it broke again, needed a whole new control board. 3 months later, it broke again, they came out and did some type of repair. 7 months later, it broke again and it needed a whole new control board. They wanted to charge us $250.00 for this, but after some major arguing in regards to how New this was and the warranty now out, they waived the fee. 3 weeks later, the same problem as before! I am so angry about this lemon of a dishwasher! They are coming out again today! I am quite sure they will need to replace the control board again! I will never buy another Whirlpool product.

DO NOT BUY ANY WHIRLPOOL PRODUCTS! After purchasing a dishwasher in April 2017, it died after a year. The subsequent years have been filled with waiting all day for service repairs 6 times and living without a dishwasher for up to a week at a time. After 6 services the product continues to malfunction. They are refusing to replace the item and now inform us that we must pay to have it serviced. I cannot stress enough that no one should purchase any products from Whirlpool as they are sub-par products and they do not stand behind their products.

We purchased KitchenAid Model YKESS907SS05 Electric Range from Appliance Canada April 2012, just before we took possession of our new home. We began using the range in July of that year and it worked well until September 11, 2014. At that time we decided to use one of the features of the range which is the self-clean feature. During which the control panel failed and our oven ceased to work.We contacted Appliance Canada and they suggested a technician come to assess. We called the suggested number and they send a technician that was not Whirlpool certified and we had to pay out of pocket for the visit $158. He did absolutely nothing during the visit. We then called Whirlpool Canada and they informed us that he was not Whirlpool certified and to call Appliance Canada, we immediately called Appliance Canada and made arrangements to have certified technician come to assess. Whirlpool Canada also indicated at that time that the board that failed was still under warranty and we should not have to pay. September 22nd the second technician came to assess the situation, used tape to cover the front blowing air duct so as not to have the hot air blow back onto the control panel. This was a temporary fix, they ordered a control panel in the interim that they would then use to replace. The control panel came in October the 22nd, was replaced and the new board was faulty, put old one back in and re-ordered another board. The part was on back-order. By mid November, after numerous calls, we called Whirlpool directly. They authorized that the technician to get the part from another supply source. On November the 26th, technician came back - tried new board could not get it to work, left it with us and ordered additional parts. At that time the technician who was taking the case had a family emergency and would not be able to come back out until the new year. Subsequently, Appliance Canada authorized a new company to resume our work with a new technician (Toronto Appliance). He came out December the 17th, with the board that was left behind, he was able to get the oven working. December the 22nd while in the middle of cooking a meal, the oven failed again. We called Appliance Canada and they had a Technician scheduled to come December the 24th from Toronto Appliance. However, on December the 23rd the oven resumed working. The Technician came on the 24th but because the oven was working again could do nothing. On December the 31st, while dinner was in for guests, the oven failed yet again. We called Appliance Canada, yet again, and they scheduled another visit with a new control panel and additional board. The technician arrived again today, January the 28th, and could not get the stove working. He was instructed to order an additional part and we are to wait another 2 weeks. In total, we have been waiting for 4 and a half months, we have also been told that we were not to have used the self-clean as this causes these types of problems. Why is it offered, in addition, Whirlpool has not supported our direct calls, nor authorized the replacement of a product, that for all intents and purposes, is faulty. We have had no success in the resolution of this issue nor support to reach a resolution from all parties involved. I would suggest not buying any product from those involved as their lack of support for their product is appalling.

Purchased a new Whirlpool Energy Smart 50 gallon water heater from Lowes to replace our existing old one that had gone bad. Never again!! Had it professionally installed by one of Lowes installers. I have no problem with the installer.... the water heater was a piece of junk. From the first day we had sporadic hot water and to get that you had to have a hot water tap turned on full force. If you turned the tap to a lesser flow you got cold water. Couldnt get a hot shower at all. Contacted Whirlpool customer service 4 times by phone and 3 times by email. Horrible !!!! If I had read all the reviews ahead of time I would never have purchased a Whirlpool water heater. Each time contacting their customer service I was informed I had a plumbing problem... probably a cold water line was feeding into my hot water line??? Really??? After living in this house for 20 years all of a sudden I have a cold water line magically connect itself into my main hot water feed? I even set the temperature up as much as it would go. Could easily hold my hand under the hot water without getting burned. Most of their phone reps sounded like they were reading from a check list sheet and no desire to actually listen to what I was telling them. One even sent me a PDF file via email that had nothing to do with the problem I was describing to them. I finally told them after two weeks of this that I couldnt live with this situation and they said Well our technicians are 38 miles from you and we wont send one that far to check it. Asking what I could do they said Id have to hire someone (they werent able to tell me if I should hire a plumber or electrician) and Id have to pay for it and they would reimburse me. Sensing that this might be a fruitless task I resorted to calling the Lowes store where I purchased it and asked their advice. They offered to send out the original installer to check it out and work with Whirlpool over the phone. Like I said, I have no complaints with the installer, he was fast and professional. I stood there while their technician/customer service had him go through a few tests on the unit. All of that proved nothing except in their minds that nothing was wrong with their unit. He got off the phone and told me They refuse to accept any responsibility for the product being bad. I asked him what was I supposed to do. He got on the phone with the manager of the Lowes store and they agreed to swap it out at no charge to me. I of course was very happy but told them after all of this I didnt want another Energy Smart type water heater and that I didnt trust the electronics at all. He agreed to swap it out for a regular type and give me a credit for any difference in cost. Had this all done in one day and am very pleased with Lowes commitment to customer service. The new heater (still a Whirlpool sad to say) appears to be working fine just like my old one did. So much for it being a problem with my plumbing. After reading all the complaints about Whirlpool water heaters, I guess Im not looking forward to much of a life expectancy with this one and Im certainly not even going to attempt to call Whirlpool customer service if I do. This whole thing cost me $700 and as far as Im concerned Ill flush $700 down the toilet before buying another Whirlpool product. I still would love to know how any person with half a brain could tell me I had a plumbing problem when all that was done was removal of an old water heater and replaced with a new one. Thats two pipes people...cold water in, hot water out. I see that there was some type of class action lawsuit filed against Whirlpool. Maybe they need another one filed or forbidden to sell water heaters ever again.

I purchased a Whirlpool Cabrio top loading machine approx 3 yrs. ago. When I first bought it, the machine was super quiet... loved it. I loved the capacity of it. About a yr ago I noticed it started making all kinds of noise, we cant have a conversation downstairs because its so loud. Turns out the bearings are broken. The technician was nice enough to explain to me that its a common problem with those machines. However, Whirlpool is not willing to stand by their product and repair it free of charge. Any other product would of been recalled and repaired. That goes for cars, baby products, and so on. But not Whirlpool, I called and spoke to Andrea in Michigan who told me that there is nothing that they are willing to do. After reading the other reviews and their terrible one star average rating it doesnt surprise me. Shame on me for not researching this product before buying. I hope this saves someone else from making the same mistake. In case your wondering, it cost me $117.00 to have the tech look at the machine. The labor would of cost $125.00 and the part is $251.00........

Bought Whirlpool electric range in Dec. 2005..expensive..so the warranty expired a few months ago. The electronic keypad that controls the oven and lights doesnt work. The repairs will be $408 plus tax which is obscene, and are guaranteed only for 90 days.This after only 5 years of minimal use...just me using it.I will never buy whirlpool again.

I am done with Whirlpool. Everything I have bought is failing. I bought all new appliances when moving into my home. Dishwasher, 2.5 years old, quit. Cost is going to be as much as a new one. Refrigerator quit at 5 years old, what a mess that was. Paint is peeling off my clothes washer. I am not going to buy or recommend any more of this junk.

The Whirlpool duet front loading washing machine came with our new house five years ago. That machine has destroyed multiple clothing items including very expensive sweaters and undergarments. It has destroyed biking shorts and just about anything of value. Even destroyed the bags fur delicate clothing. I have to get a repair guy out every year to replace the bellow too! It is terrible!!!

Bought a Whirlpool Cabrio. Noticed it was getting really loud less than a year into owning it. Called while it was under warranty. The tech said it was fine. Within the next year and a half it got so loud, you cant hear anything else in the house while it is running. Now it is leaking from the tub seals and the bearings are going out according to two service techs I have had come look at it. They say it is more expensive to fix than the washer is even worth. This is due to the parts that would be used to fix it are the same cheap Whirlpool parts that were put in it in the first place. They both said that these are not good washers and commonly go out about a year and half to three years old. Shame on Whirlpool for making such a low quality product and not being willing to do anything about it.

Less than 1 year ago, I bought a washer and dryer. From the beginning, we have had a water problem and the water only comes cold... no warm water in the normal cycle. They came 6 times to service the machine and they cannot fix it. They said there is nothing is wrong with the machine but it does not wash with warm water in the normal wash cycle. I advise not to buy this product anymore. It is under a warranty so they should fix it or replace it. I am sick and tired of talking to them. They said if we send the service guy then I have to pay for it which is not acceptable because it is under a warranty. If anyone is thinking about buying this product, I advise not to get it and waste money on it.

We bought the microwave in August 2018 and last week it burned a hole through the turn table which broke it and burned a hole in the floor of the microwave. Whirlpool said it was under warranty but refused to bring a new one. They ordered a new glass turntable and painted the spot that had the hole burned in it. What makes me believe it is safe now to use? What caused a microwave to go awry in the first place. It has to be a safety issue and Whirlpool will do nothing about it. Lousy customer experience.

Bought Model# wtw4800xq4 washer @ Lowes 9/01/13. Started having problems within months at our beach cottage unrented, our use only, no more than 4 small loads a month. Replaced circuit board, still same problem - stuck in rinse, never drains, wont spin. Another company came out, replaced solenoid. Thank God we bought year extended warranty. Quit again. Have to wring out clothes by hand, rinse out soap in sink. Another company comes, replaces shifter, breaks again. I go to Lowes, demand new unit. They send another company out, broke next day 1 load later. Got new washer from them same model. Within months problems start again. Now broken again. After new shifter 3 months ago, songs like rocks in coffee can. PIECE OF JUNK. CALLING again for service after Christmas. Absolutely disgusted with Whirlpool and the whole lack of admission of design flaws. NEVER WHIRLPOOL, new mantra here.

I am completely dissatisfied with the Whirlpool Cabrio top loading machine. Our washing machine is less than one-year-old. It doesnt get the clothes clean, especially the darks, and it is so rough on the clothes that they come out twisted tied into knots. The dark clothes come out dirtier than they went into machine. Even though we use the dark detergent on the dark clothes and program for an extra rinse cycle, the clothes come out with white powder all over them. They need to be washed again and sometimes again. And sometimes they still dont come out clean. That is not very energy efficient. The clothes come out of the machine so wrinkled that everything needs to be ironed. I can imagine making washing machine that doesnt do its primary function, which is to get clothes clean. Todays families do not have time for this extra work.

We bought this Cabrio washer WTW6400SW2 several years ago. Immediately after having it delivered and installed, it started displaying an F1 fault code. The main control board was replaced under warranty. It happened again within six months. Another board was replaced. That board lasted another six months. The warranty was up by then, so I used the machine by hovering over it and restarting it every time it failed. After two years of this piece of junk, we put it in storage while we worked on the road. It was brought out on 10/01/11. I called a repairman (who came on 10/04/11) to come replace the board again. He told me that the last two times it had been replaced with the same defective board, that Whirlpool had never fixed the problem. He claimed he had the new improved board, which he replaced for about $350. Two days ago (361 days later), it went bad again. The same repair company came back and said it was the board again. I just tried chatting with a person working on the Whirlpool website. They (of course) said they would do nothing about the washer. They do not stand behind their product, obviously. Does anyone know of a class action lawsuit over these washers? It is a ridiculous amount of money to spend for a product that does not work. This is just wrong!

Whirlpool has been my brand for years but I must say that after buying this washer #WFW75SHEFWO from Lowes - on sale, which is clearly a lemon, that I will never buy a Whirlpool appliance again. Not because I believe all of their products are subpar, but because the service on these units is unacceptable. The first call for service repair resulted in the Appliance Repair Service company missing the first appointment due to being overbooked, rescheduling and missing the second appointment due to illness, and the third appointment the guy finally arrived nearly five hours late. Supposedly they were a man short. When the technician finally showed up he claimed it was the board and the pump and scheduled a time to return to fix it and then he never showed up... No call whatsoever. Clearly a lack of clear communication and no respect for a customers time. I called Whirlpool to complain. Nathan, a supervisor was attentive. I requested a different company and was refereed to Appliance Doctor in North Hollywood. Rosa, the customer service receptionist at Appliance Doctor, is quite pleasant, professional and clearly wants to correct the numerous missed appointments that keep occurring with her Whirlpool appliance repair company. First repair appointment missed due to illness, next he came and did not really inspect the unit completely, and third appointment rescheduled nearly a week later due to a death in the family. No other repairpersons? I am certain it will be a car breakdown the next appointment. I have no patience for bad management because it is always an extension of bad ethics, which if you believe many of the negative reviews on this site Whirlpool and their various appliance companies appear to frequently miss the opportunity to engage within an honorable sphere. This is a new washer purchased only a few months ago. One technician mentioned it was due to overuse of soap/. The other technician was adamant that it was a sock stuck in a pump. Really? He did not open it up or even check the unit with any thoroughness. Error codes are enough. I was informed it would cost me and that this problem of the unit shutting the door and not completing the wash cycle was not covered by warranty. I informed him that I would call the manufacturer and insist on the unit being fixed. I did so and Whirlpool agreed to cover the repair. My schedule has been adjusted repeatedly to be present for these various service appointments only to have them cancel with a text. Bad business. I called Whirlpool repeatedly and was informed that socks must be put into a wash sack and no rugs with rubber backing. Again, my jaw dropped. What? I had an Amana washer and dryer for over 12 years and they worked great! So sorry I got rid of the Amana washer now. The Whirlpool is a piece of junk... Poor design and the fact that they are okay with such bad service has me calling around to other companies for a new washer and dryer set that will be on par with my Amana set. Whirlpool is clearly keeping these appliance companies in a brisk business with such abysmal technology. I am on the phone with another Whirlpool rep, Tracy, who is very attentive and helpful. The music playing while waiting, sometimes for 30 minutes, is similar to a film score, which helps calm the anger of time being wasted.

I purchased this stove online and have been very happy with the features. I am able to use alternate settings based on the size of the Pan/pot. Cook timer, light, variable rack displays, etc. The only negative feedback is the need to add 5-10 minutes more to the temperature, based on the recommended cooking time of your recipe.

Misinformation provided about their products - I ordered the Whirlpool 30 Drop-In Electric Range pictured in their literature with a gray oven door. When I had it installed, I thought it had a green film covering the oven door. It is not a film. It is the oven door color. It does not show that or talk about it in any of the literature. I would not have bought or paid to have this range installed. The green color does not go in my kitchen! I would sue them for misinformation if I had the money to spare! I will never buy another Whirlpool item.

We purchased a Whirlpool (gas) range with double oven, in April of this year. We found that the upper oven over heats, on the right side, and therefore burns or bakes unevenly.The repair company will be out for the fourth time tomorrow. They have been very nice to deal with, but really have not been able to repair or come up with any definitive plan of repair action.

I replaced a 15 -year-old propane water heater with an electric on 02/01/14, due to the high propane prices, $6 a gallon, and because I felt the heater should be replaced. After installing the electric water heater I filled with water purged all the air out, powered it up, went thru diagnostics and heated water to 120. After an hour I turned on the hot water at the kitchen faucet, hot water was there but not for long, water got cold,.I troubleshot the problem back to the anti-scald valve installed 15 years ago when I had a professional install the first tank. By placing my hand on the hot water line coming out of the tank, I found the water was indeed hot before the anti-scald valve, after the valve the water was cold indicating to me the valve was not functioning properly. I went to Lowes bought the parts to bypass and removed the valve, went home and in another hour had the problem solved! I wondered why I had to turn the temp upon the old heater to get hot water! I am very happy with my electric water heater, not only did Lowes have the last one in stock, it was on sale $100 off regular price, it is a digital controller type with water temperature setting on the front. I checked the temp at the water faucet in the kitchen. I had it set to 120, the water temp out was 119.8 on my digital thermometer. Water was too hot so I lowered it to 110, perfect temp for a hot shower. Even if the thing uses more electric than it should I still save because the fact of propane is so high I couldnt see spending $600 for 28 days of propane, versus $400 on a new electric water heater. I would rather pay a higher electric bill than feel I am getting ripped off with the propane dealers! Also there is absolutely no residual heat loss. This is well insulated even comes with pipe insulation!

Ive spent more repairing this washer than what I paid for it new!!! Its really ridiculous that Whirlpool isnt more responsible for their equipment that doesnt stand up to their name! Ive replaced more things than I want to type but just to start the computer board, pump, bearings just to name a few. Each time I had my repairman out it was a minimum of $300 to repair. Ive had my repairman out 5 times to repair things. Thinking each time its cheaper to fix it than buy another which I surely didnt think I would be repairing it several time! At this point Im just sick to death that a washer that is for a home of myself and my daughter has broken down so much. I cant imagine what a family would go through. Even after all the repairs it still isnt right but Im done sinking money into this sinking ship of a washer! Its loud constantly stops due to un level so I have to move the clothes around usually having to repeat this several times before I can get the load to finish!!! Then they come out wrinkled more than they went in and I have to iron clothes. A person should NOT need to iron! May as well wash them in the river on a rock. It would be easier!!! SO DISAPPOINTED!!!

Im guessing the company that makes Whirlpool appliances no longer make dependable appliances… bought home 2 yrs. ago. Bought Whirlpool over stove microwave and expensive side by side fridge. After 1 yr. microwave stopped heating. Now my fridge is no longer cooling. Have cleaned it underneath, did all a normal person would do. I replaced my microwave last year with a Maytag. I’m sure I will have to replace the fridge very soon. My stove is a Maytag. Dishwasher a Frigidaire... have had no problem. Just the Whirlpools… Will never buy another Whirlpool. Not just me, my niece bought a microwave. Her stopped heating after one year.

Immediately after purchasing an entire kitchen of Gold Series kitchen appliances including the refrigerator with bottom freezer in 2/2013 from Lowes we began having issues with the refrigerator. I am not an engineer and dont profess to be, but even I can figure out that the whole thing is a problem based on a design issue. The top drips water consistently and has from the first, which has been addressed numerous times. Ice maker replaced trying to fix the situation two times. The freezer guides were messed up and off from the beginning, and had to be ordered-waited for, then installed. In total a repair person has been here, an inconvenience on our part - 7 or 8 times and we still dont have a refrigerator that works properly!The last time we had someone look at it, there was a part that had to be ordered from, yes, Mexico and we had to wait a week or so and they told us they could rent us a loaner!!! Are you kidding me?? I should have kept the old 26 yr old fridge in my garage that is still working that was built in America! After buying $8000 in appliances and supposedly a top of the line brand name that in the past has shown integrity to their products... I pay my bill each month, because if I didnt someone would put it on my credit. But who puts it on Whirlpools credit? Who is going to hold them accountable and how many complaints must there be in order for someone in the government to step up and do something to a company that is taking tax dollars from our US and sending it to other countries but selling less quality products to those who do pay the taxes? I am ready to sign a petition! I should have gone with the other brand! Any other brand would have given me a better shot than this of having less of an issue! Terrible experience and certainly NOT GOLD! Shame on YOU Whirlpool!

I have had no issues with my washing machine. Love the different settings. Washes clothes well. Dryer has minor issues like the drying dial stopped moving so I need to manually turn it off. It’s more of an inconvenience, but for the price it should work.

I purchased the Front-Loader Duet in June of 2008. Like many of the consumers here, my machine began making a thunderous sound during the spin cycle. I contacted Whirlpool and arranged for service. The service call was $129, the estimate was over $1100 to repair (bad bearing). The machine originally cost $899 plus tax. I called customer service to complain. I had owned two top-loader Whirlpool machines; one for 15 years, the other for 12 years with no service calls ever needed. How can Whirlpool possibly justify what is obviously a design defect by telling me that I should have bought an extended warranty? I replied that in my experience, an extended warranty is an unnecessary expense for a Whirlpool product.

Whirl Pool Duet Wash WFW9400SW - I had this washer for 5-1/2 years. I use it about 3 times a month. Warranty ran out this last February. Machine stopped working. Called tech and he came and said I need a new console and power board. Two weeks later I get told they dont make it anymore and sorry about your luck. I used this washer under 200 times in 5 and half years. Whirlpool offered nothing and I will never buy a Whirlpool product again.

Good washing machine for 3 year. 4th year onwards your repair cost starts increasing. I purchased machine for 24 k. Now my repairs costs are 25 k. Each time the service guy comes puts me a bill of 7 k and above. The complaints to Mr ** goes to deaf years as he never picks the call. Their visit charges also are more and never give warranty above 30 days. How will you feel when you have paid more money on services ce than the product. I have supporting hills for all.

I am a mother of 4 children and 3 grandkids, I love cooking and baking. Before I can post a review on a product or appliance I like to wait and give it enough use to test it. About 2 years ago I purchase a Whirlpool range. I trust the Whirlpool brand because is durable, easy to maintain and simple to operate. After owning my first Whirlpool refrigerator for over 15 years, I am happy to post my review on my almost 3 years old Whirlpool gas stove and oven. I am a satisfied and proud customer of Whirlpool!