Absolutely read the reviews on this machine before deciding on a purchase. I have experienced with great frustration every issue addressed in other reviews. Clothes constantly have to be rewashed. The Quick cycle will leave your clothes in a puddle of water. But then there is no spin only cycle to correct that. I have purchased Whirlpool washers before with great satisfaction but this machine is not worth the money I paid for it and does not save me on water or electricity costs because of all the rewashing I have to do. Like others I am stuck with this machine until it dies. You lost me as a customer, Whirlpool.

Less than 2 years old; a loud chirp began and the water dispenser stopped working, along with the ice. Repairman came out--ordered a part. One week later another repairman; another part. One week later another repairman--couldnt fix the problem. By now no cooling in the refrigerator at all. Tech line has to review the findings. Have heard nothing after nearly 3 weeks without a fridge, ruined food, and no ice other than my back yard!

This is a portable dishwasher with a butcher block top. Great to use as a rolling island countertop. The capacity is huge, fitting large pasta pots and dutch ovens with ease along with dish plates. Love the water miser setting and the no heat dry to protect delicate material like china dishware.

Contacted Whirlpool - unit (Cabrio washer 7600xt) is out of 12-mo warranty. Spoke with manager, Tracy **. She said they would not help - out of warranty. Called local parts/service center - ea. hinge is $42 plus shipping and labor to install. Obviously this is a defective design. The lid is too heavy. I was having a difficult time deciding to spend 150-200 dollars every 2-3 years for hinges on a $700 washer and then I read all the other complaints about Whirlpool washers. I will sell it for scrap and buy a better brand.

I am so thankful that there are others who are having the same problems with their washers. Since 2006, my husband and I have had words regarding who is not loading the washer right, why are the clothes still dirty, and why does the dryer have so much lint. The excessive amount of lint ruined my dryer. I get UL codes all the time! Before the UL flashes, it sounds like someones trying to break in. It is 2011. Despite the problems, it has not died yet. I am selling it and will never purchase another from them again. I have the dryer and it went out 2 years ago. It has problems with the motor. You can guess I did not buy a Whirlpool.

I thought the new AquaLift cleaning would be the greatest. Boy, was I disappointed -- no thoroughly disgusted and very angry -- when I tried to use the self cleaning oven. I had cooked a prime rib roast and a lot of grease had spattered inside the oven. I wiped away the excess and did a cleaning cycle -- what a joke! There was still grease running down the door and walls. Nothing was changed after two cleaning cycles. Now I have to crawl inside the oven and scrub it manually. I was always pleased with the old self cleaning ovens which only left some ash and a little bit to clean up. The AquaLift technology doesnt work at all, didnt Whirlpool test it prior to selling it to the public? They will surely lose my business and I hope a lot of other peoples business as well. This technology was a huge mistake!!

My French door refrigerator and freezer stopped cooling while under a 5 year warranty. The repairman came out 4 times to fix it over a couple months and I lost the ENTIRE CONTENTS of my refrigerator and freezer 3 separate times! I am a single mom working at a non-profit agency and I had to take 4 DAYS off of work to accommodate the repairman. Finally the repairman notified Whirlpool it could not be fixed and I was told by Whirlpool that it would be replaced under the warranty and I should wait for a call back, which never came. I called back after a few days to speak with the Exchange department and Mindy told me that I had to pay $1600 to get the exchange! When I asked to have the call escalated she flatly refused! What kind of corporation is Whirlpool that would treat customers this way? Never mind that the quality of their products gets worse with every passing year! Made to break so they can force you to buy a new one! Ive been without a refrigerator for 8 days already and cant feed my family properly with no place to store food!

I purchased a washing machine and dryer 1 year ago. Since then it has started to get spots on the control panel where you select size, temperature, etc. I also purchased an extended warranty through Home Depot and is still under warranty for 3 years. I was told for a few more days is still under man warranty. I contacted Whirlpool and they said it is not their problem and sounds cosmetic - I think this is unfair being that I spent a lot of money and it has started appearing on the washer and dryer. No one wants to be responsible. I am a consumer who is very careful and have not had any spills or cleaned it with anything.

My side-by-side lasted 2 years 3 months. It stopped cooling. Lost all my food. Inconvenienced by waiting for repair service. Had to take a vacation day from work. This refrigerator replaced a 13 yr old GE and the one in my garage is 25+ years old and still going strong. No help from Whirlpool or Lowes. I will never own a Whirlpool anything ever again.

My refrigerator is now 5 years old. I have a stainless steel fridge. I didnt even have my fridge for 2 months and the one door started to rust. Whirlpool did fix that but now my fridge isnt staying cold. My extended warranty was just up 5 months ago. Figured some of the repairmen that we have called wont touch our fridge because they say the model that we have breaks a lot and that Whirlpool discontinued making this model. I am disgusted with this fridge.

We purchased a brand new Whirlpool water heater from Lowe’s two years ago. The water heater is not heating properly, and I contacted customer service to inquire about their great warranty. I was very disappointed with their poor customer service, but above all, their warranty. They emailed instructions to run a test, which did not resolve my issue since I still run out of hot water halfway through my shower. Mind you, its only one person in the house for a 40-gallon Whirlpool water heater. I have replaced the heating elements and thermostat, and it is still not heating. I contacted Whirlpool customer service, and they are refusing to replace it, stating that the water heater is working. I will never buy any Whirlpool appliances again. They do not back up their products, and their customer service is worthless. My recommendation is not to buy Whirlpool products.

We had the Whirlpool Cabrio Washer [WWT5640xw0] for approximately six months and it began to behave strangely, very much like the other complaints I have read on this site. It works poorly, does not clean the clothes, there is a smell that is coming from the machine and it makes loud, inappropriate noises. It stops spinning and washing in the middle of a cycle. Before I become aware of the issue, I would find loads of clothes sitting in the water and the machine indicated the cycle was completed.What a piece of junk! We cannot afford to go out and get another washer at this time and based on what everyone else is saying, the cost of repairs is very costly. I too called the company and was greeted with indifference. I too will not purchase another Whirlpool product and have spread the news to my friends about this worthless product and manufacturer! My message to this company: Whirlpool, the right thing to do is recall the machine and provide us with a voucher so we might go and purchase another machine from any manufacturer we wish. But we all know that will not happen as the company is clearly saying to its customer base, Our sales and profits are more important to us than you and your satisfaction!

I purchased a brand new Whirlpool Cabrio Washer from Sears less than 5 years ago and am junking it! It has all the same problems everyone else has mentioned. I have had it serviced for faulty motherboard, unbalanced tub, broken lock mechanism. It had rusted out on the inside. Clothes are never clean and it constantly becomes unbalanced in spin cycle. We have to stop and rebalance every single load 3 or 4 times--or more if trying to wash a set of sheets or two or more towels. Cant leave the machine unattended for even a few minutes. I might as well be hand washing on a scrub board at the edge of a river! Waste of money and Whirlpool Customer Service wont say anything but should have purchased extended warranty! What a load of crap from what was once a reputable company that used to make a reliable product. WARNING--NEVER BUY A WHIRLPOOL WASHING MACHINE!!!!!

I bought my Whirlpool refrigerator model #ed5fvgxws07 in Oct. 2011. One year seven months later, I am experiencing my 1st breakdown. The refrigerator side is failing to cool. I have replaced the temp control thermostat and I am waiting to see if this fixes the problem. I have researched and checked the other possible problems and it is unlikely that it is a defrost fail as there is no frost build-up in the freezer section. And, I checked the heater element and there is continuity through the element. If this does not fix the problem, I believe that there is one other possible solution. I dont have $300.00 to give to an appliance repairman. Maybe I should give it a rap on the side as one other customer said a repair person did to make it work for a few more weeks.

I just bought a Whirlpool 50-gallon water heater from Lowes because my old one took a turn for the worse. I brought it home, installed it just as the directions said, and immediately got an FVS fault detected code as soon as I plugged it in and tried to ignite it. This is by far the worst experience I have ever had with an appliance. And wouldnt you know it whirlpool service center is closed on weekends. What an absolute piece of trash. Im draining it and taking it back ASAP. Lowes and Whirlpool just lost my business for good.

Bought Whirlpool Gold refrigerator, microwave, and stove. The bottom where the freezer is located leaks if you dont slam the drawer shut - many times leaking regardless. The microwave needs to be unplugged/reset about once a month or so because the power dies - light comes on, food rotates, no heat. And the small stove light indicating the burner is on for the front left burner suddenly doesnt light up. 0 for 3 on satisfaction. Appliances are 2-3 years old. Did not get extended warranty. Everyone tries to get you to buy but didnt realize I was buying junk. Will not recommend or buy this brand again.

We bought the Cabrio less than 5 years ago. First of all, a high-efficiency washer should not require an extra rinse after each wash, but this one does. I cant see how thats being efficient. The washer, even for a small load, can take up to 54 minutes, and then when you tack on an extra rinse, its well over an hour, so what you may be saving in water, youre spending in electric and wait time. And then, there is still a soap/water scum left on the clothes, which is only evident on the darker clothing. Now, just recently, the washer is stopping, and NOT unlocking after about a minute into the start cycle. I will have to cancel the wash, turn it off and unplug it before I can get it opened. Im sure its something to do with the electric panel, which after reading the reviews, we are not going to fix, and we are headed out to buy the traditional top loader, NOT high efficiency, which I suspect will still be more efficient than the Cabrio.

Bought this refrigerator in 2018 and ice maker went out 2x, then compressor went out and waited 4 weeks for part. Now the refrigerator is broken again and not cooling. Dozens of other reviews indicate the same issue with this model. It’s clearly a defective model. Customer service in Tennessee are very friendly but my refrigerator is still not working. Whirlpool French door - wrf954cihm.

I bought a Whirlpool Cabrio washing machine from Lowes 3 short years ago. Within the first year, it needed a new main board. Now just 2 years later, it needs another main board. It has never worked correctly. I have purchased another washer from another manufacturer and will never buy a Whirlpool product again and neither will anyone I talk with about this. Dont buy Whirlpool products!!

I count myself as lucky... my Whirlpool 465 Accubake Ceramic Cooktop stove was given to me. I have used it for 3 years. One day, out of the blue, the oven, which was in use, started clanging loud and jumping up and down. I started screaming & tried to cut it off & it would not go off. I ran to the panel box & threw the breaker. It also burned my food that was cooking. It did it several times. Then I decided to not cut the light on or touch the button to raise the temp. It has not done it since. I bake everything on 350 degrees and immediately throw the breaker. I am scared of this stove and plan to replace it. I will NOT buy a Whirlpool, anything. (washer/dryer/fridge/aircon)....once bitten...

My whirlpool Cabrio washer top load had the rust problems, bearing problems, support arms replaced along with the complete drive assembly motor bearings and all the parts. My bearings have failed 3 times since 2009. This machine is junk. Customer service at Whirlpool is a joke. They treat you as if you have had to do something wrong. Finally I spoke with a salesman who said speak with the warranty company. I have the extended warranty which I advise everyone who purchases an appliance to get one. So I spoke with them and they sent me a check for a new machine. I must say our warranty company has been very helpful. So THIS IS MY WARNING TO ALL. PLEASE DO NOT BUY FROM WHIRLPOOL. IF YOU DO YOU DESERVE WHAT YOU GET, SORRY TO SAY... Have a great day.

I am excited that I found this site, putting it in Favorites! Using the advice from ConsumerReports, we purchased a Whirlpool Gold French door refrigerator model GI 6SDRXXY02. We were looking forward to the energy efficiency reported. I blamed the kids and my husband when the water started appearing on the floor by the refrigerator. After a while, I started investigating and I saw the sheets of ice that had formed in the bottom of the freezer. Several times, I removed the ice, only for it to form and start leaking on the floor weeks later. We discovered the drain was frozen and that during the defrost mode, water would freeze in the bottom, and once the ice was too high, the water would flow over the ice onto the floor. My husband has unloaded the freezer and defrosted the drain with a hair dryer several times. So sick of this!! We never received a recall notice and of course, the warranty is out. I wish we hadnt paid so much for this refrigerator. It would have been out by the curb months ago. We are in the middle of a kitchen remodel and getting new cabinets. I will have to dispose of this expensive refrigerator. UGH, money down the drain!! We wont buy a Whirlpool!!!

I purchased a Whirlpool microwave oven from American Furniture/TV in Fenton, Missouri on 11-13-2010. It had a Whirlpool 1 year warranty and a Performance Guarantee for five years. I noticed recently that the plastic on the door had hairline cracks near the handle and now is beginning to crack around the glass on the front door. I called American when I noticed the cracks by the handle and was told that it was cosmetic and not covered. Now the cracks around the glass may be a bigger problem if they let fumes out from the microwave. I am waiting for a second answer from American. I feel like the problem is with the plastic itself.

Another person with problems called this a giant Whirlpool paperweight and he is so right! I received delivery of a Cabrio WTW7800XW3 washer on December 17, 2011. I had an issue (stopped in the middle of the cycle and flashed the letter “F” on the control panel) with it on January 2nd. I called and scheduled service. I had unplugged the machine and a few days later I replugged it and it started to work, so I cancelled the service call. In March, the problem started again. It just adds a little bit of water and then stops. Since then I have had repairmen out 6 times with 8 new parts installed and the washer still doesnt work. Now, the control panel won’t work. Whirlpool refuses to replace the machine. The repairman says these are the worst machines (any of the ones that are top load and have a clear top) he has ever seen and that I should buy an extended warranty. He says the bearings in the tub wear out among other things. On one of the repair visits, the serviceman found a chewed up pair of baby pajama pants. The machine makes a really loud noise like a jet engine taking off whenever it spins and the clothes are not clean. Whirlpool says that the warranty does not cover replacement of a defective machine. I have since researched the machine and have discovered that there have been problems with this line of machine for years. So, why are they still selling them? I am hoping for a class action suit. The company should stand by their products. I will never purchase a Whirlpool (or any other brand manufactured by Whirlpool) product again. I have had the machine for 4 months and it has been usable for about 2 of them.

I bought a dual oven Whirlpool 2 years back. This range keeps breaking knobs that are such a poor quality. I have bought knobs from Whirlpool 7 times already then got PSEG home service and they are tired with the quality itself. Save your money and buy another make! Poor customer service and the worst experience is what I have gained on buying this make. Have old mother at home and this headache only created more issues to help her with cooking.

Whirlpool Cabrio washing machine: The washer was purchased in March of 2012 and malfunctioned in December 2014. After phoning Whirlpool, the machine was scheduled for repair with a factory-authorized company. The first repair attempt was unsuccessful due to a lack of parts. It took 10 days for the parts to arrive, and another unsuccessful repair attempt was made. The verdict is that a new motor control board, costing $350 plus labor, is necessary. With the delay in service and cost of repairs, I may as well buy a new machine.

I have front load washer and dryer; I have had them for 16 years and this year is the only year that I have any repairs done and it was only the dryer and it was minor repairs for parts and labor ($200).

As you have heard from 700 other people we bought a whirlpool refrigerator because GE sucks, brand new refrigerator died in 4 years with 4 service bill costing more than the refrigerator. So we did some research and whirlpool was being recommended by several stores and the reviews were better than most. Well we bought the Whirlpool refrigerator and it has been nothing but problems from the start. Everything that can go wrong has and of course our warranty ran out. And we are sitting here with no water, no ice, water tray falls out and breaks. Called whirlpool many times and their answer every time is, we will send someone out for you, and then we get a 300 to 400 dollar bill. Whirlpool sucks as bad as GE. Its crazy these companies get away with this crap. They can build good refrigerators they have in the past. My grandparents have one for 25+ years, now you cant get 2 years out of them. Pure Junk! I dont know what a good brand is anymore, they all seem to suck. Good luck.

Most of my appliances are Whirlpool - dishwasher, refrigerator, clothed dryer and the Cabrio washer. The washer before this one, I had it for over 10 years and replaced it because of rust (thats another problem with Whirlpool - rust). Now the Cabrio hasnt got all kinds of problems - UL, F1 and jumping. The serviceman asked me for $450 for repair; it included a set of springs for the drum, a new electronic board and a 30-day warranty on parts and labor. Im better off buying a new one (I cant afford at this moment). My wife is scared of the darn thing and refuse to use it so now I have the job of washing and standing guard to make sure the washer doesnt leave the garage. Thank you, Whirlpool - and my refrigerator works fine all rusted.

We got a brand new bottom freezer french door Whirlpool refrigerator in our brand new apartment. Since we moved in last week the temperature control in the refrigerator box has failed three times. The freezer stays cold but the coils are frosted solid and no cooling gets up to the refrigerator box. We turned on moisture control but that didnt help. The users manual is completely useless and in fact doesnt even match the control panel. The numbers for temperature settings on the instructions dont match the numbers on the panel.We had to turn off and thaw out the unit completely three times already and this is just the first week! Last night the building maintenance guys came in and sprayed the back panel of the freezer with warm water. He said he talked to the GE tech, who suggested we also increase the freezer temperature settings to 4 and the refrigerator to 44. But this morning the temperature rose again. It sure sounds to me like the daily defrost cycle isnt running at all and nobody wants to consider that possibility. Thaw the unit several times a week is completely ridiculous. Our food has experienced so many temperature excursions who knows whether its any good now. I cant wait to get my first taste of salmonella. This is what you get when you combine junk with poor service.

I purchased the washer 1.5 years ago. At about 9 months, the latch was in need of replacing. The washer was locked and would not unlock. That was fixed. Fast forward to 1.5 years old and the control board needs replacing. The washer stopped in the midst of a cycle, filled with water. The repairs are over $400 -- nearly the price of a new washer. Ive never had a washer to go out on me. I willingly gave away my previous washer for the purchase of a newer model and did not expect this fiasco. I will recommend against purchasing a Whirlpool washer.

It goes off balance, frequently. It is moldy and stinky. I wipe it out, use a cleaner and leave the door open, but it still stinks. I am getting rid of it and buying a Speed Queen top loader. I am extremely disappointed in the front loader Whirlpool.

I am so unhappy with your product. Constantly have to restart machine. Never had a problem with my other washer. Takes forever to do laundry. Hate it.

I purchased all new, upper end Whirlpool appliances for our newly built home just 6 months ago, to include a side by side refrigerator with ice maker and water dispenser, an over the stove microwave, a smooth cooktop oven/range, a dishwasher, a washing machine and a clothes dryer. We plugged in the new refrigerator, and after 24 hours of letting it sit and get cold, we bought $300.+ of groceries and filled our new refrigerator. We pulled the milk out hours later and it was warm, checked other food items and found them to be warm, too. I placed a thermometer in the refrigerator and it read 55 degrees. In disbelief, I placed a second thermometer in the refrigerator and it, too, read 55 degrees. Being brand new, only hours old, and clearly not working, I called for a replacement refrigerator. Our builder said we needed to call Whirlpool for a replacement. Whirlpool refused to send us a new refrigerator. Needless to say, we had to throw out all of our food for being dangerously off temperature, and we were less than happy about wasting $300.+ on food we could not safely eat, but glad we didnt have food poisoning. Not even the freezer could maintain a temperature below 55 degrees. While waiting on a repairman, we noticed that we were not hearing the refrigerators motor come on more than once every several hours. They sent a repairman out three days later, and he found nothing wrong other than a poorly fitting door, he said. He replaced the door hinge and told us our refrigerator would be cold in 3 - 5 hours. Well, it never did get below 55 degrees, set on the coldest setting. Whirlpool was called again and they couldnt seem to get another repairman out to fix my brand new refrigerator that could not perform its most basic function, which is to maintain food at proper temperature. Again, Whirlpool refused to send me a replacement refrigerator for this clearly defective refrigerator we were stuck with. We were told it would be 2-3 weeks before another repairman could come out, and then he would have to order parts after he diagnosed the refrigerator problem, taking another two weeks. We needed a refrigerator, like most people do, so we were forced to take this brand new refrigerator and stick it in the garage, not being able to sell a brand new refrigerator that wont get cold. Angry at Whirlpool for taking our money and leaving us with a refrigerator that never worked, we bought a Samsung refrigerator that we are very happy with - it works! After 2 months, our Whirlpool above the stove microwave has the motor turn on when we close the door, and it takes several opening and closing sequences to get it to shut off. We will be replacing this new microwave when we can afford to.Our ceramic/smooth top stove/oven, takes a very long time (at least 20 minutes) to preheat and the temperature in the oven is not accurate to the set temperature, according to my oven thermometer. The cooktop surface is inferior; it gets permanent water spots and it scratches very easily even though we use the correct pans and are very careful with it, and does not come clean easily. The surface feels rough, not slick like the GE Profile ceramic/smooth cooktop range that I had for 14 trouble-free years. I am using the same exact pans that I used with our GE, and we know how to be gentle with a smooth cooktop surface. After 14 years of owning the GE stove, the GE felt slick and smooth, cleaned easily, and did not have one single scratch on it. It looked as good as new when we moved, after 14 years of use. I will be replacing this inferior Whirlpool smooth cooktop range as soon as I can afford to, as well. Last month, right before Thanksgiving, our new Whirlpool dishwasher started making a really loud motor sound and quit working that day. It would fill water, drain the water and shut off. I once again called Whirlpool, and they were maddenly unhelpful. This time, they told me they would have a repairman call me in 5 working days to schedule an appointment to come and see my non working dishwasher. After 7 days, I called Whirlpool AGAIN, to ask why someone did not call me for an appointment. I was expecting a house full of people for Thanksgiving and I had no working dishwasher. I spent a lot of money buying these crappy Whirlpool appliances and am very frustrated. This time, Whirlpool told me that they could not find a service person in my area to service the unit. As if I live out in the middle of know-where?! I live 20 minutes from Austin, the state capitol of Texas! A 20 minute drive from the capitol building to my door! Whirlpool told me I could take my 5 month old, broken dishwasher to a repair shop and that the repair shop would need to call Whirlpool before they did any work, and that Whirlpool would only authorize a maximum of $150 to repair my dishwasher. They actually had the nerve to tell me that I would have to pay for the repair, and they would mail me a gift card in 6 - 8 weeks to reimburse me up to $150 on my new, broken dishwasher that is under warranty. I was furious!! Some warranty! The broken dishwasher is now sitting next to the broken refrigerator in my garage. I needed a dishwasher before Thanksgiving dinner, so I went and bought a Samsung.I realize that all makers can have a lemon, but all of my Whirlpool kitchen appliances are junk!! I will never own another Whirlpool product for as long as I live, and I will tell anyone who will listen about our abominable experience with Whirlpools customer service and the expensive, crappy appliances we unfortunately wasted a lot of our money on. Do yourself a huge favor, buy anything but Whirlpool! Thankfully, everything else about our new home has been great. Our new Whirlpool appliances will remain a very sore subject for year to come, I suspect.

If you are in the market for a new washing machine, steer clear of the Whirlpool Cabrio (or any Whirlpool for that matter). We have had issues with ours from the beginning. We had Whirlpool techs come out and were continually unable to fix the issues. Eventually they told them that it was not broken, even though one tech told us it definitely was. After four service calls they just stopped sending out techs and told us too bad. Now after less than two years it is leaking from the bottom. Yeah, Whirlpool, theres no problem with it. Save yourself the potential headache and get something else. Anything else.

My washing machine is a front loader. Previously I would not have purchased one, but after using it for a year or so I have changed my mind. As long as I do not overload it my clothes come out perfectly clean using cold water, and partially dry so needing less drying time.

Purchased a Whirlpool Electric Range August 2015. Purchased it because it looked pretty and the Aqua Lift Cleaning feature sounded too good to be true. As it turned out it WAS too good to be true! I have just read a # of reviews about this range and I agree with all complaints. Does anyone like this range? The AquaLift cleaning technology is a joke! The baking temperature fluctuates & I could not figure out how to improve on that (for the longest time I thought it was just me not being able to figure out my new oven). The most serious concern however, happened a couple of weeks ago when I turned on the oven & immediately the oven started to smoke and an electrical smell permeated throughout the house. Had I started the oven and immediately left the house our house would no doubt have been destroyed by an explosion/fire.Phoned Whirlpool & because the problem was so serious they had a serviceman at our door within 2 days (yes I am being sarcastic, it did take 2 days). At no time did the call centre express any concern nor did they advise me to unplug the range and to make sure I did not use it. Obviously, I would not use it but shouldnt that be something they advise as part of the checklist talking points.Serviceman arrives 2 days later & advises us that the parts alone would cost $650.00 & oh yes the labour costs to install the parts would be charged by the minute. I didnt even ask him how much per minute because only an idiot would repair this piece of junk!! The power cord to the range had basically melted right through; you could scrape the char right off the cord. The computer part of the range was shot and had a strong electrical smell to it. The serviceman basically said that I shouldnt shoot the messenger and charged us 93.45 to tell us that it was going to be a very costly repair.I disliked this range almost immediately and was looking forward to the day when I would have an excuse to purchase another electrical range. I did not think I would be shopping for another range within 1 1/2 years from the time I purchased this piece of crap!!! Nor did I think that there would be a possibility that this appliance could potentially be hazardous to my family and home. How long is Whirlpool going to ignore all these customer complaints? This range should be recalled! It not only is selling features such as the Aqua Lift technology that do not work properly, it is selling a potential fire hazard.I will never again purchase any appliance that is made by Whirlpool. Whirlpool makes a lot of appliances and uses names such as Maytag, Amana. KitchenAid, etc. I have purchased another range and this one is made by Frigidaire (no connection whatsoever to Whirlpool). I dont know what my experience will be with my new Frigidaire Range but so far I am loving it! Hopefully, my new appliance will not nearly burn my house down. Whirlpool: Step up to the plate & take responsibility for the defective electrical range you are selling before there is serious harm to persons or property! THIS ELECTRIC RANGE NEEDS TO BE RECALLED - MODEL # YWFE715HDEHD.

We purchased 2 whirlpool commercial coin operated washer machines and both computer boards had to be replaced twice each - model CAE2743bqo and CAE27438qd.

The repair technician just left telling us that our Whirlpool Cabrio washing machine is fine. It is a little over a year old, makes LOUD noises as it runs, doesnt get the clothes clean and often doesnt even get them wet. The clothing sits above the water and comes out with pet hair, soap and dry spots. We use it the way the manual directs but it seems to be a totally defective machine. We sure wouldnt sell it to anyone nor give it away to some poor unsuspecting soul. Guess it needs to go to the dump. Shame on you Whirlpool for taking advantage of so many of us.

Its awful! We paid over $600 for our Whirlpool Gold Series convection/microwave clean release oven (model GMH 6185XVQ1). It worked fine for 12.5 months at which time it started clicking and, after a final zapping sound, would not heat anything at all. I called Customer Service, Oh, so sorry, its past its one year warranty. I was finally transferred to Escalations then to the supervisor of the Escalation specialist. Finally, we negotiated that I would pay for the service call ($129) and they would pay for parts (which were around $300 for a fried magnetron, diode, and something else). That repair was 6 months ago. Today while heating a glass of water in our microwave, I heard the familiar zap and no matter what, the microwave will not heat anything. I called Customer Service again, figuring the newer parts were still under warranty. Wrong. The newer parts were only covered for 90 days. This time, they tried to sell me a service plus package. For only $289, they will re-warranty my microwave for 1 year after they come out and fix it again (cost on me). My other option is to pay $129 again for another service call plus any parts (which Im sure will be about the same as last time. I will never buy Whirlpool again! Buyer beware!

Sounds crazy, but the outside of my stainless steel door is all dented. I live alone and one day noticed that it looks like someone body slammed my fridge. Is there air in the door panels that could be escaping or something like that? Anyone hear of this?

GX5FHTXVB00 - Purchased fridge in 2009. In the second year the freezer got too cold and fridge was warm. Coils were frozen. Lost all food. Repairman replaced thermostat. This happened twice more with the same result. My warranty has expired, fridge is 5 years old and its happened for the 4th time. Whirlpool doesnt care since its out of warranty. NEVER will I purchase a Whirlpool appliance. They DO NOT stand behind their product!

This product is JUNK!! We replaced out hot water tank 1-07-11. Worked good for almost 9 months. Then the pilot light keeps going out. We have replaced everything three times already. Now we cant get it lit for nothing. Its blinking 7 times!!! This should not be happening. When you call Whirlpool, you always get some smart ** rep trying to solve your problems over the phone, telling you what its doing. Excuse me, your not here with it, I am. I even had the plumber on the phone, he got so mad at them, he handed me my phone back and said he is not dealing with stupid. They have no clue what they are talking about!! Its crap that we have to pay $30 for them to express mail a part when its the middle of the winter and we have no hot water. Im at my wits end with this hot water tank. Im ready to sue their butts. Sounds like to me by reading all these reviews, a lot of people are having the same issue. We need to do something about this. They had a suite against them but not for my water tank. They were replacing the parts. Ive spent over $1000 from buying it new, having it installed and paying for repairs on the hunk of junk!!!What can we do??? We need to take a stand against Whirlpool. We need to exchange information and contact an attorney and make them pay!!

Purchased Whirlpool dishwasher and range approximately 16 months ago. Dishwasher must stop in middle of rinse cycle because the dishes always feel filmy and there is an inch or two of water in bottom. Must be bailed out by hand. Piece of garbage. Called Whirlpool and they can get us a service man from 8-4 (who waits an entire day these days) on New Years Eve. Next appointment is following week to examine and will fix (if it is their fault and for a fee). The last two dishwashers I purchased lasted 10 and 7 years respectively. Stay away if you dont want bad equipment, uncooperative service, and aggravation. Range I bought was OK but the oven temperature is always off 10-15 degrees from what it says it is. I honestly wanted to buy American but I feel cheated. Next time Ill try Samsung and see if they give a damn.

I paid about $400 for this dishwasher and the regular price was over $600. Got a good deal. It washed dishes wonderfully. All I had to do was scrape the chunks off. It cleaned the rest. BUT... at a certain point, it started NOT cleaning. It was only about 6-7 months old. It was to the point where everything just came out kind of slimy and food grit was re-deposited on the dishes. I cleaned both filters. I made sure there was enough Rinse-Aid all the time. I ran hot water in the sink before starting to make sure the temp was hot enough. My husband went online and someone had instructions about cleaning the water intake because it could sometimes have sediment buildup. Not a difficult process, but there was no gunk in the intake filter. When I listened to a load it seemed like it drained, (most start with that), paused, rinsed for a couple minutes, paused, drained, paused and refilled for the wash cycle. So the pump worked, the arms went round and sprayed. Nothing was in the way of the arms. After it started the wash cycle, it seemed to just stall. It would spray for about a minute and then stop. Im not sure it sprayed after that. The timer kept counting down. It said dishes were clean, but it was an absolute waste of time. I was ready to go buy a cheap dishwasher and throw this one in the dumpster. I think it is a 720 padm??Just after my husband checked the water intake filter, we started another cycle. When it was rinsing, he opened it up and everything seemed to be working ok. It drained, then filled and started the washing cycle and then stopped. He opened it back up and surprise, the water was full on the front level by the float (that turns the water filling off). But in the back of the dishwasher, there was only about an 8th of an inch of water. Online it said the water should fill to just about the top of the heating element. It WASNT. Problem? It wasnt LEVEL. The instructions when installing said it should be leveled. We did when installing it (when it worked great). But looking back, we put in a new hardwood floor about the time it stopped working ok and we didnt put 2 and 2 together. We did not re-level. When we pushed the dishwasher back into its built in cabinet, it must have gotten OUT of level.The rinse part worked I guess. Then it drained and re-filled. After re-leveling the dishwasher, we opened the door at that point. The water was a level depth front to back and side to side. My husband explained what he thought had been the problem to me. When the wash cycle starts it fills, the float shuts off the water at the appropriate level. THEN... the dishwasher starts to pump and fill the arms and the tube up the back that feeds the upper washing arm. So much water goes into the arms and up that tube, the dishwasher looked almost empty of water again. As the dishwasher was now level, it began adding water to compensate for the arm/tube filling. Before the float would shut off too soon because the front part of the tub was full but the back wasnt. Without enough water, the dishes were NEVER going to/COULDNT get clean.The re-leveling made sure that the float didnt turn off the water filling until there was much more water, the CORRECT amount. The next load cycled all the way through, spraying much more than Id heard before and the dishes were clean. P.S. I also got some dishwasher cleaner and used that on a couple empty cycles. I NOW LOVE this dishwasher again. FYI If my husband wasnt handy Id have junked this thing. We HAD leveled the dishwasher when we installed it. Just didnt realize it COULD get un-level just pulling it in and out of the cabinet to install new floors. Check out all the troubleshooting stuff in the manual. But if it doesnt help, put a level inside across the bottom rack, front to back and side to side and make sure the bubble is in the middle of the two lines.The previous dishwasher I had, just made like a fountain of water that went up the middle of the dishwasher into a sort of funnel filling the upper arm. THIS one has that tube up the back and it curls down under the filter and Im guessing it is more sensitive to being OFF LEVEL, because the tube doesnt go straight down, it curls and lays across the bottom of the tub. Without being level, there was never enough water to suck up that tube to start the the actual wash cycle and it just stalled there till the timer said clean at the end. IE: dishes never did wash. BUT IT DOES NOW! Woohooooo!

I have the same pilot light problems as everybody else. I pulled the burner unit out, and cleaned, and blew everything out, and took a wire brush to the openings on the floor of the unit. I called customer service, and was asked about ventilation. I didnt mention that the heater still didnt work, even when the door to the tin water heater was removed, so venting is not the likely culprit. She authorized a repair that will likely do nothing from the comments I see.The real problem with their customer service, is the apparent stupidity of the computer system. She asked me for the model and ID number. I had to cut through the extra insulation blanked on the tank to get it. However, when I gave it to her, she then asked me if I was ** and if I live at **. If this information was already in the computer, why couldnt there be a search by my name and address, to get the model and serial number. Obviously, I had registered the water heater in the past. Isnt being able to get this information the reason to register in the first place?Now, I have to replace the extra insulation, all because of a stupid inability to create the necessary searches in their customer database. Yes, I could have written the numbers down, but why have the customer registration at all, if it isnt to be used for anything, other than data mining of the customer base.

I need to start by saying I or we, my wife and I are both disabled - her with a head injury and a prosthetic leg and walks with a cane and myself well Im stuck in a wheelchair, this makes grocery shopping more of a chore for us than most people and putting things away is part two for this chore. I figured Id buy the biggest, best (LOL) refrigerator Whirlpool had to offer, so I could do our grocery shopping once a month and have a place for everything and the fridge being so big would be capable of holding a months worth of food. It performs that function very well!The problem began when I purchased this wonderful piece of quality craftsmanship (cough) at Lowes in Denton Texas on 6/19/13. While one delivery guy stood on my sidewalk talking to me, we watched the one other guy bringing my rather large brand new Whirlpool refrigerator up the driveway with a regular (not an appliance) dolly. After getting to the end of the driveway and having to go through the front yard to get to the sidewalk, the monster fridge started leaning and eventually ended up on its side in the front yard, needless to say I was a little concerned about damage. They continued to get it in the house after providing me a nice gouge in the door frame before realizing it may be best to take the front door off before entry. So after getting it to the kitchen and removing the box we noticed the left door was way out of whack, so the delivery guy called his boss and we all agreed I needed a new refrigerator. A week later my second new refrigerator was delivered, no box around this one but it made it all the way into the kitchen without a hitch or any more scraps in the front door frame.Three months of dealing with water running down from the ice maker into the door storage areas I made my first service call, the guy said Whirlpool doesnt always put the correct thickness of gasket between the ice machine door and the ice bucket. He ordered gaskets and installed them the next week. Water continued to run down the door from the ice bucket to the shelf storage. 5/14/14 I called for another problem. The refrigerator seems to be running all the time, and there was a fan starting and stopping continuously as well. This was Miles Appliance - he seen the water running down the door and squirted a tube of sealer in the ice machine, replaced the little plastic fan and said that should fix it! I let the Whirlpool service scheduler talk me into the extended warranty since my one year warranty was about to expire so I bit and bought the warranty. 7/18/14 the fridge had a new sound going on for the last few days and still seems to be running all the time. I called for another warrant service, this time I drew In Home Appliance Repair. After waiting three days a guy comes out, verifies the fridge isnt cooling properly and tells me to unplug it for three days, so the ice ball that has formed somewhere can melt, that the noise I was hearing was a fan rubbing against the ice ball. So three more days go by and I plug in the fridge. Two days later the freezer has only cooled to 50 degrees. I called In Home Appliance Repair and they told me Id have to call into Assurant to make another service ticket, which I did. It takes two to three days for service tickets to get processes. After the second day, I called McNiels in Denton to see when I was going to receive my service, they didnt have a ticket for me. I told them Assurant said they would be providing my warranty service. McNiels told me they only service what they sell! I called Assurant back, they turned it over the scheduling gods. Three days later they set me up with a repairman 45 miles away. After waiting on him for four days he says he just doesnt have time to come by and pick up my refrigerator to take to his shop. I call Assurant again and am told its being turned over to the scheduling gods again. Three more days go by and they set me back up with In Home Appliance Repair. I call and they tell me they will be out on July 7 2014. The evening of July 6, 2014 In Home Appliance Repair calls and tells me theyve decided since the defrosting didnt fix the problem two weeks ago it was a system failure and they dont do that type of repair, they would call Assurant for a different service provider. I call Assurant to see whats up, they tell me A&E Factory will be out on July 13,2014. Now nearing a month WITHOUT a refrigerator and still not knowing how long its going to take to fix the problem! If Whirlpool is trusting Assurant to provide extended warranty service then thats exactly what they should be doing, it certainly isnt my fault they cant get service people out in a timely manner to resolve appliance issues. Its not like being without a stove or microwave - this is a refrigerator!!! This is the poorest service I have ever received from Whirlpool and Ive been a faithful Whirlpool customer for many years. In my opinion they should bring me a new fridge, haul this piece of crap to the nearest dump and be done with it! And after reading some of these posts there are lots of people that feel the same way about their appliances. This type of Customer Service needs to STOP, $2700.00 for a refrigerator and have to deal with crap like this is crazy!!!

We purchased the Cabrio Agi top loading washing machine in 2011 (3 years ago). After 2 years it started leaking from the plastic drum (Bearings?). Luckily we have it in the basement on concrete floor, so there was no damage, just frustration. This was poor purchase on our part. We should have searched for more reviews. The wash time is ridiculous; it is too long, an average of 50 minutes per load. I dont know about how clean the clothes were, I guess they were OK. I didnt notice a smell, or them looking dingy. The Cabrio is a piece of junk if the bearings went out after 2 years?? We just purchased a heavy duty Speed Queen, top loading, agitator washer. My wife loves this, its like the old Maytag we had. They told us they wont be selling these washers after next year. Buy them while you can. The Cabrio is headed to scrap yard.

We purchased a new motor home with a whirlpool refrigerator. The refrigerator went out three months after purchasing this new motor home. We have had two expertise come out and check. Both repairmen said there was a leak in the cabinet and needed to be replaced. They called Whirlpool who will not honor the warranty. We are still under warranty but it is not worth the paper it is written on. Do not buy their products because their products do not work and they will not replace broken items from the manufacture. Will have to contact better business. Not material enough to hire attorney. This is what they count on. BEWARE.

Purchased in January of 2014: Brand new Whirlpool WOS51EC7AS01 model oven - interior bottom metal has buckled causing the enamel to crack and break off from oven bottom. I registered all my new appliances immediately for warranty. When this happened after the fourth or fifth time baking in the oven, I called Whirlpool to get a service person to look at it. First person Whirlpool scheduled to come out refused to even come out, without looking at my oven. He said he knew we did something wrong? They immediately set up a second service person, after two weeks waiting for an answer; I had to call him (twice). He said that his report and pictures sent into Whirlpool shows normal use and there is nothing wrong with our oven? So, Whirlpool will do nothing to repair the oven? We just spent almost $4,000.00 on all new Whirlpool appliances, and this is how we get treated? WOW! Never again will I ever purchase a Whirlpool product. The enamel is gone in spots from our oven floor. How long do they think that will last with no protective coating on the oven? Terrible customer service.

Just like many before me... Renovated my kitchen. Had my model WRF767SDEM purchased from Lowes (not much help either) in my garage for 2 month before plug in. After 3 months upper part did not cool, lost food to spoil. Call WP. Tech came. It took 3 wks for part to be replaced and worked for a month. Now we are waiting for a new part to arrive for the second time > Tech Stated it is a known design defect issue by Whirpool. (But units still being sold everywhere.) WP Should recall this units and stop selling them!! IT IS A LEMON FRIDGE. Do not buy!!! I wish a law firm read all of these complains and make this a class action suit out of this, It will be the only way Whirpool can be held responsible to Us the consumer!! Yes I am mad after $2600 wasted on a POS fridge and a deplorable customer service!!

Whirlpool Cabrio Washer and dryer. Bought the Cabrio Washer. Worked great for 26 months. Had to throw it away. Main motherboard went. Not worth fixing. Called Whirlpool. They offered a $340.00 service contract only. Piece of garbage. Do yourself a favor. Do not go by looks. Its junk.

Im so tired of the mold smell that never goes away, even after following their cleaning cycle many times over. I dont know what to do but I spent extra $ to purchase my washer and now this!

I purchased the 19 cu. ft. Whirlpool Estar refrigerator WRT 3595FYW on 4/28/12. Freezer began showing frost immediately. Repairman from Marcellas Appliance where purchased - (518) 381-1957, came to check it, put a sealer around the door openings of refrigerator and freezer. Frost continued. I called Whirlpool. They sent another repairman from EB Russell in Schenectady, NY, door needs replacing. Door was ordered and when received by them, the door was replaced on my refrigerator.In August 2012, frost is in freezer, on its roof, on the door daily. I called Whirlpool. I told them I wanted to remove it from my home. Whirlpools reply was, you have a repair warranty, not a replacement warranty. I was not advised of this when I purchased. Otherwise, I would have gone to Sears, Lowes, etc. On 8/16/12, another repairman from The Appliance Man, Albany will be here Monday. Its dishonest sale, replacement was advised possible by Marcella, that it was just a matter of course to get an okay from Whirlpool. This is not so. There is no replacement or return policy. Please help. Thank you.

We bought our new Cabrio (washer and dryer) in the fall. Within 2 weeks, I realized what a piece of crap these machines are. They simply do not clean the clothes. I have complained to the store where we purchased them, and I was told there is nothing they could do as the machines are performing as designed? Im waiting for a class action suit to join to get rid of this junk. Curt

I purchased a Whirlpool Refrigerator in January 2014. When it was delivered it had a dent in the left side door (the door with the controls and ice-maker). I reported the problem to Whirlpool and they told me that they would send a new door and would have a third-party technician install it. About a month later, February 2014, the door arrived, after calling the technician; he came out and attempted to install the door. The door would not fit! Called Whirlpool and they told me that the refrigerators were produced one at a time and that they would have to manufacture a new door. They promised the new door sometime in May. In the meantime, I have a damaged unit and I need to store this huge box for months. The refrigerator works fine to keep the food cool and the ice and water features work well. The ice-maker is a bit noisy but it only operates occasionally.

My dishwasher was a $300ish model from Lowes. It is over 5 years old and has been reliable for a single persons use. It is run about once a week on average. Early on I had problem with it not cleaning well but that was the fault of one of those no leak supply hoses that restricted flow...fixed that. Would I buy again? Yes.

Whirlpool refrigerator Model #GX5FHDXVY010, freezer on bottom. Ice maker broke within six months of purchase. Made loud noises, would not function to freeze ice. Turned waterline off and now use ice trays like the old days. Shortly thereafter, second unrelated problem started. Drain line started backing up and runs into the bottom of the freezer floor where it freezes into a thin sheet of ice, and then runs onto the kitchen floor. Have had the line cleaned out over and over again. Have been buying fridges for 50 yrs. and have never had this problem. Whirlpool says call a repairman and pay to have it fixed, but it happens over and over again. Whirlpool should come up with a permanent fix and pay to have it fixed. Based on the numerous complaints of this problem, this model needs a recall now.

Since May 3, 2016, five servicemen have failed to repair my Whirlpool refrigerator (WRF560SEYM), which is less than 2 yrs old. One trainee from A&E Factory Service had the nerve to reinstall broken parts. I have been completely without refrigeration for the past 48 hrs only to learn that the repairman scheduled for tomorrow has been cancelled because AIG warranty has not approved his visit. Further investigation reveals that the parts were never ordered, pending approval from AIG. Whirlpool cant help me because AIG has not declared the appliance unfixable. Hhgregg cannot help. I have spent countless hours on the phone on hold & wasted hundreds of dollars on spoiled food. Dont trust Whirlpool. Theyre not the company they once were. Their warranties arent worth the paper theyre printed on. Buyer beware!

I highly recommend a Whirlpool dishwasher. Ours is a simple model. Cleans well and is quiet. It is 7 years old and I am glad we chose this model. Very happy with Whirlpool. All of our appliances are Whirlpool.

Purchase a brand new Whirlpool fridge at the Fry’s Electronic in 2017. Broke down in 2018 almost 1 year after. Called Whirlpool company for replacing a new one. They didn’t replace before they had sent out a certified technician for fixing 3 times. It took forever to fix it, and still had the same problem after months. Finally, they agreed to replace a new one. Now I still have the same problem with a newer one which they replaced it over a year ago (including fixing and placing time). Just called to the Whirlpool company today for fixing or replacing, spoke to rep Sara, she said that it’s no longer under warranty because it’s more than 1 year. I told her that because the company didn’t replace right away; therefore, it has been more than 1 year; but from the time they replaced it, it hasn’t been 1 year. Ill never buy any Whirlpool products again.

My husband and I purchased a Whirlpool Refrigerator, model number GI6SARXXF04, serial number K20311478 on February 3, 2012. It was delivered soon after. In April of 2012 our ice maker quit working. We called The Appliance Doctor for service. They reset the control, and left saying that they thought it was fixed. The ice maker as a result was not fixed. They came out again, and stated that the ice maker needed to be replaced altogether. So they ordered the part and we waited for two weeks for it to arrive and be installed. By this time it was April 23, 2012.Then in June of 2013 we began having water pool in the bottom of the refrigerator and freeze, and water began to leak onto our hardwood floors causing them to buckle. We cleaned it up for a while thinking perhaps something had spilled, and busted up the ice on our own. The beginning of 2014 we called for service from Lanny Adams Appliance. The technician worked on it and stated that something was plugged up in the water line and he thought it was fixed, we paid for this service on our own. On August 14, 2014 we had another technician come out because it was not fixed. The technician came out and stated that it would cost another $219.95. He further stated that he thought that there was a recall of some kind, that I should look into it. I did look into it and printed out the Technical Service Pointer that was produced in November of 2013. When I called Whirlpool at that point, someone was sent to fix it. Of course I had already paid to have it repaired in February of 2014, Whirlpool stated that it was not their responsibility, which again it was not fixed until August of 2014. As a further note, my floors were never fixed because I have hardwood floors throughout my house and simply cannot fix the area in front of the refrigerator. My floor had just been refinished, and after speaking with the floor company that had just refinished my floors a few months earlier, they stated all of the floors would have to be redone or it would not match. Figuring Whirlpool is definitely not going to pay for that, I have just dealt with it, since it cost me over $3000.00 to have the floors refinished.Now, it is February of 2015 and the whole refrigerator is not cooling, and the freezer is not freezing. Again, I woke up to water in the floor on my hardwood floors, and have had to move all of my food to my ten year old Frigidaire refrigerator that is in my basement and has NEVER had a service call. After speaking with service company, they state it will cost $1200.00 to fix the refrigerator....REALLY? So, now I get to go spend a lot more money for a new appliance. You can bet it WILL NOT be a Whirlpool!I contacted Whirlpool again, and I spoke with Robin in your Customer Service Department after speaking with one of your Customer Service Representatives that stated I was basically on my own with the repairs. Robin stated that there was nothing Whirlpool would do, but she would agree to pay for parts and I will be left with the repair labor. Although your company may think that this is good customer service, I have to disagree given the fact that I have had nothing but consistent problems with the refrigerator since I bought it. At this point, I would like to ask you if in your opinion this is a good appliance? I asked Robin and she stated that I needed to buy an extended warranty. Dont you realize it isnt about the warranty? It is about the fact that I have had the appliance for 3 years and have had consistent problems. I believe the refrigerator is a lemon, and I would like it replaced.I have always trusted the Whirlpool name, but at this point, I do not see myself buying another Whirlpool appliance.

The gas water heater that we purchased has been a headache. Pilot went out several times. When we contacted Customer service they informed us that we would have to have a new kit put on it. We ordered that and it worked a while and then we started having the same problem. Just recently we had to purchase another part and once again we have cold water. Fed up.

Whirlpool Washing machine Model WTW4800XQ1 - This machine ran fine for the first 6 months, even though my old machine took 40 minutes for a large load and this one takes an hour. Then, I had to call the repairman out and he said it was the fill valve. He didnt have one on the truck and said he should get it in within 3-5 days. Well a month later, I had to call Lowes again to find out what the problem was. They had him back out with the part within 2 days. Then, I had to call again. This time the repairman ran a test and found a bad spin motor, he had the part on truck. Third time to call and the machine is back to not spinning out properly. My old machine lasted over 14 years. Whats wrong with these new ones?

I’m a 69 year old married man who has probably owned about 8-10 clothes washers during my life. I purchased my first Whirlpool washer about 1 1/2 years ago (Cabrio - model WTW8500DC2). It began leaving sediment on my clothes immediately, even though I followed the specific washing instructions. Whirlpool sent 3 different repairmen to fix the problem, each indicated there had been problems with this machine. None were able to fix the problem. When I called Customer Service for the 4th time, they refused to discuss the problem. They said there was nothing wrong with the machine, it was my problem, I must have too much “lint” in my clothes. Haven’t had that problem for 69 years, but this was their way of handling the problem. They refused any further help. I would discourage everyone from buying a Whirlpool product. I absolutely do not back their products. You are on your own!!

My Whirlpool dishwasher washes dishes well, when it drain but it will not drain. I purchased insurance repair service from AIG. AIG is a total rip off. I paid them over $300. I have called many many times. They promise someone will call but not one ever has. I would never work with AIG or Whirlpool ever again.

These products (Dishwasher, refrigerator, cooktop, and wall ovens) are less than 5 years old and everyone of is in of repair. The cooktop and wall ovens the repair on them would equal the price of a new one. I feel that the products should last more just a few years and also their warranties. This tells me they do not stand by quality of their products.

I bought a Whirlpool model GI7FVCXWY00 over and under refrigerator directly from Whirlpool through DirectBuy on April 19, 2010. The unit was a relatively high-end model (over $2,000) that came with a 12-month warranty. Thirteen months after purchase and 1 month after warranty expiration, the ice maker stopped working flooding the kitchen in the process. We called Whirlpool who recommended one of their authorized maintenance subcontractors (GuinCo) to appraise the problem. GuinCo came out, diagnosed that a valve in the ice maker had gone bad and the repair cost us $364. We chalked that up to Murphys Law (repair needed immediately after warranty expiration). Not 4 months later, the kitchen comes up flooded again and again and the ice makers not working. We call GuinCo, the repairman come out and said this time that its a heater and ice maker defect which will cost $643 to repair. He also said that the unit has been designated as having a design defect. We held off on the repair until we could contact Whirlpool for some remediation since it has become obvious that the unit is a lemon. I called Whirlpool, laid out the problems, timelines and potential cost (ice maker failures are going to cost us almost half of what the entire refrigerator cost before the unit is a year and a half old) and the only response they had netted out to was: Sorry, you should have had extended warranty. This is a prime example of an American manufacturer, marketing an inferior product and offering the customer nothing when the lack of quality becomes obvious. I will recommend to anyone I know to stay as far away from Whirlpool products as long as I live.

I purchase a suite of Whirlpool Kitchen Appliances April 2017. My range is the slide in model. The knobs are on the front of the stove top. I 4 months in I saw that the paint behind the plastic panel where the knobs are was chipping. Also, the gasket in the oven had some loose threads so I finally decided to call the warranty. Whirlpool paid for the gasket to be replaced but Customer service said the chipping was cosmetic and that only covered for 30 days. I am so disappointed in this range and Whirlpool. My stove looks very used after 10 months. I followed the instructions on what to clean it with and how to clean so I know its not me. The paint chipping is crazy! How as consumers do we deal with this? This Range was a cost over $2000! and they give me touch-up paint!I purchased Whirlpool because I researched prior to purchasing my appliances. I thought I was buying Quality, this is not quality! At Christmas I had a pot of potatoes boil over and the element circle on the glass top cam off with cleaning. This too is not covered because its cosmetic. Ironically, my old glass top Whirlpool range did the same thing. That why I got a new one! I guess it still works. Who cares how it looks... RIGHT? Well, I WAS a good Whirlpool customer. Not anymore! Do not purchase Whirlpool glass top ranges unless you want it to look worn out after less than one year. I have tried to post pictures but this wont let me paste them!

I purchased the Whirlpool washer with the expectation of having at least clean clothes. In fairness, I do wash some pet items but they are done separately. My clothes at time come out dry in spots because theyve not been touched with water. Forget the balancing issue. What I will have to do is wash, rinse, and repeat. This will be my life until I can get a new washer. Never again Whirlpool.

I have had my Whirlpool Cabrio washing machine for 14 years. I feel this is very dependable and cleans my clothes efficiently. I love the large stainless steel tub without the agitator. I can fit a king size comforter in the machine. The only problem I had with it was to clean the lint out which I would assume would have to be done to any machine that is used every other day for 14 years. Love it!

Ive had it with Whirlpool products. I am now getting rid of my third Whirlpool microwave in just eight years. Every one of them had the same exact problem and Whirlpool continues to deny there is a manufacturing defect. Each of them developed a hairline crack extending through the bottom screw of the door handle to the glass on one side and the outside door frame on the other. They will do nothing about it and claim it is just a coincidence. No more Whirlpool ever!

I purchased a front loader Whirlpool Cabrio washer/dryer in June of 2011. I was sold an extended warranty which ends June 30 of this year. I have made 4 calls to the Co which warranties the washer because it is making squeaking noises on the spin cycle. I was refused service because the customer service rep didnt “hear” anything. I finally had a local service Co check out the machine and was told the motor needs to be replaced and if under warranty I should demand it be replaced. I called again and still cannot get NSI to come out and see the problem.

Our new fridge, which was already an exchange from another unit that went bad, kept freezing things in fridge compartment. A tech was sent out three times and then the compartment quit working completely. They stated they would replace for us, only way they would replace was to have them ship a new unit which would take two weeks. So we are without a refrigerator for two weeks. Asked if I could go buy one and be reimbursed. I could but I would NOT be reimbursed for full amount. The company reps I spoke to could have cared less about our situation especially Fred who supposedly is a supervisor. Do yourself a favor...DON’T buy Whirlpool. Their customer service sucks!!!

Brought brand new. Had for ten years. Still going strong. Matter of fact all appliances are Whirlpool. Dishwasher, stove top, oven. I like the sharp clean look in my kitchen. Easy to clean!!

Had them come out numerous times and last guy changed out entire motherboard to no avail. Freezer side freezes and then thaws. Now it is just a two sided refrigerator. Before Thanksgiving I was promised new refrigerator and none arrive after phone calls. No refrigerator for thanksgiving. None for Christmas. Finally today at 7:00 this evening January 17 2020 it arrives. I am suppose to be in bed. I have two terminal illnesses. I moved out boxes of stuff out of refrigerator. Installer came in and said I had to move stuff on the porch that they are not allowed to. I get all done, finally sit down and he comes in and says there’s a big ding in bottom of refrigerator. No idea when another refrigerator would come. Who is going to put all my furniture back? Who is going to put my food back in my refrigerator. I bought the entire Whirlpool package Made In America. I should have went cheaper and bought from China. Now there’s trouble with dishwasher and they have been out once already for that. I could worry about taking care of my health if I didn’t spend all my time dealing with whirlpool. Maybe they can bury me in the refrigerator and my daughter won’t have to buy a coffin. I make 1000 a month on disability and get 16 dollars in food stamps. I have thrown 1000s of dollars away after motherboard was fixed. I went and my friend helped and bought new groceries. One day took out a frozen burrito and as I was putting it in microwave I noticed it had mold all over it. Another food dump. Whirlpool pool answering phone says whirlpool cares. Well they don’t care about me.

WTW6340WW0 - When washing clothes, on the last spin it stops and gives an UL error message. I make sure all the clothes are level and restart at that point but still the UL error message appears and water starts leaking from the underneath of the machine. Weve reset the and unplug the machine but no difference. Please help on what else to do.

We bought this Cabrio washer WTW6400SW2 several years ago. Immediately after having it delivered and installed, it started displaying an F1 fault code. The main control board was replaced under warranty. It happened again within six months. Another board was replaced. That board lasted another six months. The warranty was up by then, so I used the machine by hovering over it and restarting it every time it failed. After two years of this piece of junk, we put it in storage while we worked on the road. It was brought out on 10/01/11. I called a repairman (who came on 10/04/11) to come replace the board again. He told me that the last two times it had been replaced with the same defective board, that Whirlpool had never fixed the problem. He claimed he had the new improved board, which he replaced for about $350. Two days ago (361 days later), it went bad again. The same repair company came back and said it was the board again. I just tried chatting with a person working on the Whirlpool website. They (of course) said they would do nothing about the washer. They do not stand behind their product, obviously. Does anyone know of a class action lawsuit over these washers? It is a ridiculous amount of money to spend for a product that does not work. This is just wrong!

It shows handprints, smudges, the door swings open and slams into stove. I did purchase extended warranty which I intend to pursue, not enough space, door issue, junk. Dissatisfied, dislike, low quality - that should say enough.

Purchased top loading Whirlpool Washer WTW5000DW0 10/12/2015 at Best Buys, first no agitator machine for us. Two weeks later I call for repair service because of the noise from tub. Explained in other reviews as earthquake or jet engines. The machine is in the garage and can be heard through the walls into the house. Repair tells this is normal for the machine and it must be our first none agitator machine.I then purchased a extended warranty policy through Whirlpool. 12/13/2016 machine no longer washing clothes. Call Whirlpool for service. Repair came out 01/17/2017 (a month later). Washer plate had to be replaced. The gear was completely shredded. Not in stock, waited 2 weeks to get repaired. Tension springs on outer tub replaced at same time. Was told the excessive grinding and bumping of the tub was not the reason for the gear shredding.06/30/2017 same problem, I set a repair date 07/01/2017 between 8:00 a.m. and 12:00 p.m. No one shows and no call. I call Whirlpool and they are sorry and set the appointment the same day for before 5:00 p.m. No one shows our calls. I call back. Already closed. I call the next day. Sets a new date 07/05/2017, 8:00 a.m. to 12:00 p.m. Same problem. I called back speak to a supervisor who says hell get to problem and find out whats wrong. Sets a new date 07/08/2017 8:00 to 12:00 p.m. 07/07/2017 I get a call after 5:00 p.m. that the repairman is not available and can we reset for 07/13/2017. I hung up and called back the next day and spoke to a supervisor I had previously spoke with. He called an outside repair company that Whirlpool uses in this area. New date 07/12/2017. Repairman shows and I explain the washer plate was loose again and I smelled metal burning. I had told my wife to continue to use the machine to wash the clothes. The repairman tells me I voided the warranty by doing this. Im standing in the garage while he has his head in the machine trying to get the washer plate out. He shuts the lid and turns the machine on wash/spin says the machine is ok. We have an exchange of words and tell him I want to see the washer plate gears. He says he cant get the plate out now and I wasnt there for him to show it to me. This continued until he forced the plate off. He called Tech Support to say I voided the warranty. He told them customer claims loud noises and banging. I asked to speak to Tech but he tells me they dont speak with the customer. I looked at the gears on the washer plate and the transmission. Both had metal shavings. He tells me he is going to do me a favor and replace both. Its supposed to take a week. Wait and see. I have asked for a replacement or money for the machine through Whirlpool. I was told there has to be at least 4 repair requests for the same problem and the repairman has to determine that there is a problem or that its a lemon. I will not recommend or purchase another Whirlpool product.

I always appreciated Whirlpool’s quality, but this brand new stove in my brand new home is a disappointment. The top, back (control panel) gets extremely hot when the oven is in use. The burners are not as easy to regulate, and the broiler (which is under the stove, a negative for me) didn’t come with a broiler pan. That was an additional cost. I had service out in the first 60 days because the oven wasn’t heating properly.

August 15, 2011 - We purchased a new Whirlpool Water Heater Model N50T61-403 for $398 from Lowes. We used their recommended installer (that was our first mistake!). He made the following installation mistakes: 1. He connected the hot water to the cold water & the cold water to the hot water. 2. He installed DRYER venting instead of HVAC venting. 3. He used flammable tape on the venting instead of screws. 4. He had incompatible metals touching near the gas line which can create an electrical charge & thus, a sparking situation. 5. He left us with a gas leak. 6. He did not install the screen that is supposed to surround the base of the water heater.7. He failed to strap down the expansion tank.These failures were discovered by an HVAC person who was in our basement to give an estimate on a replacement of the furnace & AC coil at the same time this genius was installing our water heater. The installer overheard the comments & literally... he disappeared & we never saw him again! We told all of this to Lowes & they were not phased in the least -- indeed, they didnt even seem surprised! They sent out a few other guys from the same company to correct the errors. So, it finally was installed & passed the county inspection & we had hot water again... for a little while. Within a few months the water heater pilot light would not stay lit. I was having to relight it once a week or so. After much arm twisting, we were finally able to get Whirlpool to send out a new pilot light assembly and pay for the installation. It was installed July 25, 2012. And.... it worked for 8 months. After returning from a trip on April 30, 2013, we went to take showers & the water was cold. The same problem was happening again... The pilot light had gone out while we were out of town & it will not stay lit & I have to relight it every 2-3 days.We talked to an assistant manager at the Lowes store where it was purchased. He talked to Whirlpool & Whirlpool said they would pay for the parts but not the service call which would be $149. I also learned today from the same manager that Whirlpool will not replace the product until they have replaced the same parts three times. Hmmmm.... Lets do some basic math here. $149 x 3 = $447! Thats MORE than the water heater cost! We believe that the water heater has been defective from day one & we also contend that their replacement part for the pilot light assembly is also defective (by design??). A pilot light assembly should last longer than 8 months!We are getting ready to build a new home within the next year. We will get to choose our supplier & the manufacturer of the appliances that will be in our home. Needless to say, Lowes will not be on the list. They keep saying, Our hands are tied. (Not buying it!) And Whirlpool will definitely be off of our list as their customer service is the worst Ive ever seen & their product quality is sub par. The other thing I experienced with Lowes was that when I tried to leave a review on their site for this specific product... twice... both reviews were rejected. The reviews presented the facts as Ive stated here, but because they showed Lowes & Whirlpool in a negative light, they were not posted on lowes.com. So, consumer beware -- their reviews are heavily screened so that the negative reviews rarely get posted. The consumer should be aware that the reviews on Lowes website are heavily screened & therefore do not equally represent consumers who have had a negative experience. This is an integrity issue.

I am not satisfied with your customer service, as my microwave is not working from last 4 or 5 months but no one cares for it. I did complain again and again but your engineers do not have the skill to solve customers problem, then why you say that you are a number 1 company in the world. From my point of view if someone will ask me for you to provide service, I will never recommend you.

Every time I wash clothes, I get a terrible odor that permeates my home. Ive put in afresh to rid the problem. Ive had a technician take it apart to clean the filter & hose. Nothing helps!! My clothes come out smelling like the sewer. I called the company, and the person I talked to had no real solutions either. Im MAD! What are you planning to do about my stinking problem? Im washing clothes right now & have to have all doors open & fans on high!!!

After 12 months (warranty) the bearings had to be replaced, $300. 12 months later bearings needed replaced again for another $300... was told by the repairman not to waste my money. This would happen again in another 12 months. This is a issue with these washers. Opted to get something else. Very unhappy to only get a couple of years out of this machine. I have also had to wash some loads twice to get clean... unacceptable performance!!! Contacted Lowes & Whirlpool to no avail of course. Never again!!

I recently purchased a Whirlpool over the range microwave. I especially appreciate the unit's strong exhaust fan. My previous microwave's exhaust fan was much less powerful. The unit's black glass and chrome trim look great! I am extremely pleased with the new microwave.

We Purchased our KitchenAid refrigerator from Home Depot. After 1 week we had issues with the ice maker, water dispenser and lights going on and off randomly. Technician comes 5 days later, he half way fixes it and discovers we need to order a part. The part took over a week to get and by the time he shows up to fix the refrigerator, it has now been TWO WEEKS with out our $4,000 refrigerator not working properly. Well, after trying to replace the part and spending 45 minutes on the phone with some engineer, it still wasn’t fixed. He Says to us “hey good news youre getting a new refrigerator”. Good news my **. It’s now been THREE weeks and it turns out the new one isn’t coming for another week. Customer serves reps. are really good at apologizing for the inconvenience but Whirlpool has Done NOTHING to composite us. DO NOT BUY WHIRLPOOL.

On August 16, 2016 I received delivery of an Whirlpool under counter refrigerator that I ordered online from Home Depot. Model # WUR50X24EM. Five months later, on January 10, 2017, it stopped working, I called Whirlpool for repair. They referred me to their service company, I called the service company the same day. They had a repairman out on the following Tuesday, 1/17/17. The repairman said that he will need to contact Whirlpool to order a part. Whirlpool sent him the wrong part. After numerous phone calls no one from Whirlpool could figure out the correct part number. The repairman kept sending over pictures and information on the correct part, but this all went nowhere with Whirlpool.On 2/7/17, I called and started yelling. I had been very patient up to this point. I was finally offered by Whirlpool a parts research to determine exactly which part was needed. Plus a $50 Visa card to appease me. At this point, its been four weeks without a refrigerator and no one from Whirlpool has put any effort towards trying to figure out the correct part. On 2/16/17, I called Whirlpool again to find out if they had found the correct part. They told me that the new part had been sent to the service company and Whirlpool scheduled me an appointment right then for Monday, 2/20/17.So today is 2/20/17, the repairman came and went, Whirlpool once again failed, they lied because the repairman came out with the wrong part that was originally sent to him when he ordered the part back on 1/17/17. I called Whirlpool and asked for a manager. They connected me with the Resolution Specialist. I told her everything and pointed out that it has been six weeks without a refrigerator. She said she will take care of it and get the right part ordered. I asked her how long I should have to wait, cause at this point I have waited long enough. She said she will have an answer by the end of this week. I dont believe her, I feel as though Whirlpool is pacifying me. I dont understand why they cant order the correct part.I have no faith in Whirlpool that they will do the right thing or have any understanding on how inconvenienced they have made me. I have no faith to the point that I ordered another refrigerator from a different manufacturer. It will be here tomorrow between 8am-12pm. Oh, and Home Depot, they washed their hands of this a long time ago. And, I have yet to see the $50 Visa Card.

Whirlpool Cabrio top load washer: nice job Whirlpool! You designed a washer that breaks if you accidentally wash a coin! For the second time in a few months, were fixing our washer because a coin was in a pocket. The coin gets sucked into the discharge pump and sounds like popcorn popping when it drains. It rattles around the inside of the machine’s pump until it breaks the plastic pump housing. You will know when this happens because there will be water on your floor. Did you ever consider a screen to prevent a coin from ruining the washer? God forbid someone leaves a coin in their pocket. Well, if you leave a coin in your pocket and wash your jeans, it will cost you a repair every time with this hunk of junk. This would be my last Whirlpool. It will actually be cheaper to throw this thing out and buy a new one, since it won’t be the last time a coin accidentally makes it into the washer.

Spent the extra money to have a beautiful, slide-in oven. The AquaLift technology just seemed like another plus. After the turkey cooked, just seemed like another oven to clean. The AQUALIFT does not work, except for the bottom of the oven!! A fresh oven cleaner? Only available only. Get this beautiful range, not AQUALIFT TECHNOLOGY. CLEANING with it.

We are so disappointed in the purchase of this machine! It doesnt put enough water in the machine to clean the clothes, and the spin cycle has continuously gotten louder and louder to the point I think its going to explode when it spins! Is there any recourse we have or any recalls on this machine?? Thank you for your help!!!

Whirlpool Cabrio drain problem - I never had a washing machine that lets so much through to the drain pump. I replaced pump three times already. First of all, if you put anything with buttons in this machine, you can kiss it goodbye. This machine destroys clothes then lets buttons and coins and whatever through to destroy the fins on the discharge pump. When is the BBB going to do something about this consumer ripoff?

I bought this washing machine after having my Kenmore for 20 years. This washing machine is a nightmare. I have to wash my clothes 2 or 3 times, to get them clean. Everything has residue on them. Once a month, I do use a cleaning tablet, and between loads, I wipe the washer out too! This is the biggest piece of junk! Save your money. Buy an old school washing machine.

I purchased my refrigerator from a home improvement store in October 2013. We paid around $2,600 for it. About a week ago we had a power outage and the refrigerator never came back on. I called Whirlpool repair since it was still under warranty. The said it would be 9-2-14 before they could come out. Today they came, did not have the part but said it would be here in 10 days. We will be without a refrigerator for 3 weeks. This is totally unacceptable but what can I do?

If I could give them zero stars I would. NEVER BUY A WHIRLPOOL GAS WATER HEATER! Our Whirlpool water heater Is 4 years old. Pilot light wont stay lit. A reputable plumber came out and said that the control knob is bad and to call Whirlpool to get part because its still under warranty. So I call and get nothing but a hassle. They tried to tell me that it was installed in a room that the installation manual says it not to be in. (Background here. The house was built in 1960. It is on a cement slab and its a prefab house.) The manual says Do not install in bathrooms, bedrooms or any OCCUPIED room normally kept closed. Now let me tell you where it is at. It is in a 5 by 3 boxed area with cement floor and walls to the ceiling with access doors to it and to the furnace which is also in this area. The access door to water heater is on the back side of a bedroom closet, access door to furnace is in a hall. So Whirlpool tells me that they cant give me the part Even if I pay for it due to some national fuel and gas code. They wont even tell me where I could buy the part... They said the only way they can help me is if I relocate the water heater or put in a ventless water heater. Our water heater is vented thru the roof of house... It gets plenty of ventilation. They wouldnt let me talk to a supervisor to complain... So this is why I am on here writing this review. I might add this is not our first issue with Whirlpool. Had a brand new KitchenAid refrigerator with ice maker. The ice maker didnt work from first day. After 3 techs and 3 visits it still doesnt work. Then also the compressor went out. If you want a better product and want good customer service then dont buy Whirlpool.Oh and one more thing. Our plumber also doesnt like Whirlpool. He said he had problems every time when he has to deal with them. He said its to the point when someone calls for services and tells him its a Whirlpool he just cringes. Now thats pretty bad. I just spent 4 almost 5 hours of my morning upset to the point of tears. With no results. Another note. I called my gas company. They said our water heater is in a safe place. If it wasnt they wouldnt be supplying gas to us. Live and learn. Done with Whirlpool.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

I bought model N40S61-403 gas water heater. I had it installed, and then I came to find out that you cannot common vent with another power vented unit. I contacted Whirlpool 3 times, and got no help, other then it was hooked up wrong. The issue I have is that the water heater’s pilot light puffs out when the furnace kicks on. These 2 items are common vented, in the installation guide. It does not say anything about common venting until page 11, and even then, it is not in bold or highlighted letters. Now the unit’s pilot light is going out without the furnace kicking on. Once again, I got no satisfaction from Whirlpool, other than it was hooked up wrong. I realize that I am the one who is ultimately responsible. Hopefully, they put something on the box, or earlier in the guide to warn novices, such as myself. As for Whirlpool, that will be the last product of theirs that I put in my home, and as soon as possible, I will be removing 3 other appliances during a kitchen remodel, and will replace them with a different brand.

From the day I bought the refrigerator the icemaker has not worked. I have had a estimation of service calls (8) and nobody seems to be able to fix it. Whirlpool mailed me a new icemaker and still the exact problem; water and ice works but the unit still will not cube or crush ice; which by the way is the reason I bought a new refrigerator. My thoughts are I bought a lemon and the entire fridge needs to be replaced.

Whirlpool Clothes Washer Model WTW4930XW1 - We have experienced tub overfilling on (2) separate occasions with this washer model in a period of time of less than (2) years. Through extended warranty service purchased, a technician came out the first time; declared nothing explainable to cause the malfunction, re-calibrated the control panel, and off he went. This second event occurred much the same as the first; happened to walk in to notice water on laundry room floor and witnessed overflow out the lid on top. We have carefully washed additional loads after this second event without a similar malfunction. From my online research, this sure sounds like a faulty pressure switch not sensing high water level in the tub. Any other thoughts?

I have had my Whirlpool electric oven for so many years that I don’t even remember when I purchased it. I also have a Whirlpool stove top & the same with it. Zero trouble for many years. I highly recommend Whirlpool range tops & ovens.