Bought brand new stove, had issues from day 1, called them after TWO different repair companies came looked at it and said it was a melon, Whirlpool wanted to send a third repair company. Started dealing with this in September, its now end of December and Im still waiting for replacement stove.

I bought a Whirlpool model GI7FVCXWY00 over and under refrigerator directly from Whirlpool through DirectBuy on April 19, 2010. The unit was a relatively high-end model (over $2,000) that came with a 12-month warranty. Thirteen months after purchase and 1 month after warranty expiration, the ice maker stopped working flooding the kitchen in the process. We called Whirlpool who recommended one of their authorized maintenance subcontractors (GuinCo) to appraise the problem. GuinCo came out, diagnosed that a valve in the ice maker had gone bad and the repair cost us $364. We chalked that up to Murphys Law (repair needed immediately after warranty expiration). Not 4 months later, the kitchen comes up flooded again and again and the ice makers not working. We call GuinCo, the repairman come out and said this time that its a heater and ice maker defect which will cost $643 to repair. He also said that the unit has been designated as having a design defect. We held off on the repair until we could contact Whirlpool for some remediation since it has become obvious that the unit is a lemon. I called Whirlpool, laid out the problems, timelines and potential cost (ice maker failures are going to cost us almost half of what the entire refrigerator cost before the unit is a year and a half old) and the only response they had netted out to was: Sorry, you should have had extended warranty. This is a prime example of an American manufacturer, marketing an inferior product and offering the customer nothing when the lack of quality becomes obvious. I will recommend to anyone I know to stay as far away from Whirlpool products as long as I live.

Aug 2012 bought washer, dryer, stove microwave/hood, dishwasher, fridge. $5000 later I had a service call on washer. Clothes stuck in washer for over 3 days to get fixed. Oven igniter has went out for the third time, 1 broke knob on stove. Dishwasher leaves dishes wet after cycle. Fridge handle fell off, crisper drawer rail broke off, and a door shelf is cracked. I am a veteran and unemployed. What happens when warranty expires and all my CRAP whirlpool breaks a week later? Also was told warranty doesnt cover the crisper drawer. They didnt tell me that when I purchased at Spencers on 75th ave and Bell road. Salesman at Spencers, Dan ** told us everything is covered. Im not a happy customer or VETERAN!

The interior features such as turntable, etc are very cheaply made. As is the case with most Whirlpool appliances, this one is way over engineered to focus on appearance and gadgetry. This is not a good microwave for a serious cook who prefers that the design focus on functionality and ease of operation.

A couple of years ago I replaced my Whirlpool gas range because after seven years, the house was growing a gas smell that was becoming stronger. I called the gas company and they determined that it was the oven and not their problem. I called an appliance person who could not find the leak but charged me for the service call. Before I had him leave though, I called the gas company back and had the two talk. There was a conflict with their assessments. The service guy left frustrated. The gas company guy came back and again checked and told me that the oven is definitely leaking. He told me they use instruments, not soap, to determine leaks. With this, I was mad at the appliance company. After voicing my frustration, they were going to allow me to purchase a similar new Whirlpool freestanding gas range at a discount and deliver it for free. I relented and spent close to $600 for the new range. After installation, I realized that the quality was cheaper than my old one. The metal rods in the oven racks are thinner and less of them so they are further apart. The cooktop grates are already wearing and chipping. But the thing that has irked me the most is the burners. You cant adjust them to low for a long simmer because the flame goes out, not immediately, but when youre not around to watch it; and the whole house smells of gas fumes! I called the appliance store and they said that because I didnt buy an extended warranty and that a year has already passed, I would have to pay for the service charge. I called Whirlpool and they said that they have not encountered this problem with their stoves yet. Even while on the phone, I could turn every burner on separately and the flame would go out in a circular motion as I turned the knob to low. The only suggestion they had was to call my appliance company and have them look at it. I got nowhere and I was quite frustrated! These Whirlpool stoves should be recalled! Gas leaks are dangerous! I will never buy a Whirlpool again!

I bought a Cabrio Washer and Dryer around January 2015 at Lowes. After going through the worse service imaginable, the washer was like pouring salt in the wound. I like the dryer fine, but months later, Im still unhappy with the washer. While it washes OK, it takes forever to wash a load. Most of the time, it does not spin the clothes out enough. There is no way to just spin again. You have to go through a rinse/spin cycle and you may or may not get lucky with a sufficient spinning. Why cant they just have a spin cycle and why does it have to take so long to wash a simple load of clothes? I have bought many Whirlpool appliances, but this is my last ever.

We purchased our refrigerator about five years ago and we have dealt with it freezing up constantly. The coals and vent are at the bottom of the refrigerator. I believe that is a lot of the problem. We have continuously blowed off the coals to keep it from freezing up but sometimes its still freezes up. I do not recommend the two-sided door Whirlpool refrigerator.

I have purchased a Whirlpool Water Heater on May 21, 2005 from Lowes Model number FG1F4040S3NOV, Product number 0730261, Serial number 05181291061. It is one of the Flame Lock heaters that was part of a class action law suit. The lawsuit has been settled however. I have had three thermocouples to date installed and each time the heater has gone out after three to four days. The technicians I have contacted at Whirlpool all have stated something else is wrong with the heater even knowing that this model has been seriously defective from the beginning. They always tell me to do this and that to repair it. I do not have hot water as of the date of this writing. The original problem began June 19, 2011.

I purchased a Whirlpool washing machine (model: AW01D8810 S silver color) and a Whirlpool refrigerator (model: WBM329 TI) together from United Arab Emirates for Dhs 1999/- & Dhs 1199 /- respectively on 28 Jan. 2011. I sent this machine to my hometown (India) in the same packing and I used the washing machine only for three months and found a complaint. I informed this to service center in Trivandrum, Kerala. Their team came to my home and told me that warranty cannot be given as I purchased machine overseas. They added that the PCB for the machine is having complaint and they dont have stock in India. Also, the machine is no longer available in the factory. The Whirlpool company completely stopped manufacturing the abovementioned model. Again, I came to UAE and contacted GEC group of companies for the PCB part. I got a quotation for PCB Dhs 425/- but the items is ex-stock with them. The machine cost only Dhs 1999/- and if I spend Dh425/- only for PCB, and the machine is with me for the parts since one and half years. I dont know what to do. If I spend another Dhs 600 + this PCB cost then Id rather go for another new branded washing machine. The model of machine is AWO1D8810S and serial no. is 12 nc 859247463000 003. Please advise what to do or if I can find the PCB in Kerala. What will be the cost? I am ready to pay the money for PCB but not for the above rates. Please advise, sir.

We have never had problems with our old Kenmore appliances. Since we have had the Whirlpool complete set we have had problems with both the Refrigerator and now the Stove. The fridge had already been re-engineered by the time the repair man got here but the fix didnt work. We had a 50 degree refrigerator for over a month. Now the stove wont keep a constant temperature so we wait for the service man once again. They look beautiful but they are the worst we have owned over our 36 years. They obviously have engineering issues looking at all the other reviews. I dont see us purchasing another Whirlpool appliance in the future.

The front of our Whirlpool washing machine started to rust in one place at the bottom within six years. Now it has broken out in three of four places on the front. We are very dissatisfied with machine and will never buy one again.

Bought the Cabrio washer in March 2011. Have had the same problems as everyone else. The machine is constantly off-kilter, does not wash well due to lack of water. Sounds like a freight train when spinning. Bulky clothes dont drain properly and have to be rinsed and drained a second time. After one year of ownership, the entire control panel had to be replaced. The next year, the same control panel had to be replaced again plus a water valve had to be replaced. Thank God I bought the extended warranty. The repairs would have cost me $1000, more than I paid for the washer in 2011. Total piece of junk. AVOID AT ALL COST!!!!

I purchased a 40-gal Whirlpool water heater model 40t91-403 last week and paid a plumber to have it installed. The old one (GE 40 gal) worked fine except for a leak. The new one used all of the old connections except the 2-inch in and out pipes. Same connections, hot, cold and gas. At first I got about a quart of hot water and then all cold. Whirlpool changed the valve and cold water pipe (inside the tank) and still the same. They are trying to tell me that the tank is fine - I have a plumbing problem. Two plumbers have told me different, but still they insist. Yes, I am upset. The old GE, even with a leak, performed better!

I replaced my hot water heater after 22 years and no problems. We got a 50 gal. gas heater from Lowe’s in 6/2008. In 1/2012, we had no pilot light and an alarm on high temp sensor. Whirlpool sent a new sensor and control valve to replace the bad unit. Here we go again, on 3/2013 - same parts same problems. We now have the cost again to have the parts installed for the second time. I have spent 1/2 the cost to have the parts put in than the cost for the heater. I will never pay for any Whirlpool product again. They are plain junk!

I purchased a new home and then purchased 4 appliances, all Whirlpool Gold. In less than a year, the stoves electronic ignition and the microwave hood keypad went out. Since they were under warranty, a repairman replaced a bunch of parts and now they are working fine. One month after the refrigerator was out of warranty, the water line to the ice cube maker split about an inch and a half and water would spew out onto the hardwood floor under the unit. We were on vacation for all that month and didnt see any damage until one day there was a puddle in front of the refrigerator. When we pulled it out, we saw that the floor was ruined under the unit, the cabinet next to it black with mold and of course, the line had to be replaced. Whirlpool wasnt interested in the fact that the refrigerator had probably still been under warranty when the split occurred, only that we hadnt reported it before the warranty expired. Next to go was the water seal that goes on the inside of the door of the dishwasher. I was running it about a month after the refrigerator debacle and water came spewing out of the side. The seal had come out and nothing was stopping the water from exiting out the side of the door. Thats 4 for 4 in less than 15 months. I will never buy a Whirlpool product. They couldnt be any worse.

I love my Whirlpool 4.7 cu. ft. top load washer because it has a pretreat station that is super handy for pretreating stains in a handy little place. The agitator is stronger than my old washer and really gets my clothes cleaner. Its also very quiet and easy to use all the buttons. The best feature is the deep water fill that you can select for more water.

Not cooling properly on wpf560smywc2 French door - Milk only last 3 days. Temp wont stay consistent. 4 times out and say normal. Ice is forming on fan in freezer and back wall causing no flow in refrigerator but freezer cooling. Only 3 months old. Lowes Service Advantage (Extended Warranty) nor Whirlpool will replace or do anything about it. Was told 3 times out and replacement then today they sent me email with their policy or 3 times out with a repair (Parts must be changed) wait 30 days then another repair etc. then on 4th repair will replace. Lied to buy sales and called liar by repair guy when he told Whirlpool nothing wrong. I just wanted a new one cause I didnt like features. Lowes has a return policy which has in fine print only 30 days for refrigerator so they wont help. Was told I have to do a food loss claim and they would email form. Still hasnt happen. Lied to and get a replacement or repair and cant afford another.

My 79 year old grandmother hasnt used her Whirlpool washer in 5 months because of defects that Whirlpool USA thinks they are going to fix. Really??? How long is she going to go without being able to use her washer that she bought from your company? Is it going to take a year? 5 months!!!! I should be billing you for all of the out service of laundry we are having to pay for because of this inconvenience. I have never experienced worse customer service and more of a waste of my time and my dad’s time. I hate posting this but the only other option is therapy for my family from dealing with this insane issue.

I did not purchase it, the stove came with the house. I like the flat-top... easy to clean. I dont like that any little spill causes a stain that has to be cleaned. I didnt shop for this one. Although I would have this as an option if I was shopping. Low quality would be a problem. I want my stove to last a very long time. But, I dont want to pay a lot of money for it. I have a Whirlpool, glass top (smooth top) built in stove. I dont know the model. It has 4 electric burners, of 2 sizes. It has dials to control the heat amount.

We purchased Whirlpool Cabrio Washer WTW5600 series in October of 2010. I bought the machine from Sears and also bought the extended warranty. Less than 6 months after I had been using it, I noticed that all my husband’s shirts were getting sweat stains under the arms and my hand towels were very smelly after drying with them one time. I called Sears to have someone come out and tell us what the problem was. He said I was using too much detergent so I reduced the amount of what I was using. It did not help the problem so I started using the extra rinse each time I washed, still did not fix the problem. I called them out 3 more times in 2011. One tech told me I was still using too much detergent so I reduced down to 1 tablespoon like he suggested. I stopped using softener in my washer because he said I needed to clean my machine more than one time a month, to clean it every 3 weeks. No solution to the problem still. I have had a tech from Sears and one from Whirlpool (who incidentally was the same man, he was from A&E Appliances). When he came in the door, my husband told him he had been here before and I said 2 times. He lied and said he had not been out before. Are we blind? No. He ran the cycle but sat in his truck while he was running it. None of the techs have ever put a tool on the machine to check if the water level is right. They just stand there and tell us to change the amount of detergent or clean the machine with Clorox more often. I cleaned it 8 days in a row and the clothes still smell and still do not get cleaned. We talked to main man at Whirlpool and said they couldnt do anything because their 1 year warranty had run out. We have been using Whirlpool appliances for over 30 years but I will not ever buy another one. I have probably had 5 Whirlpool washers over the years but never had a problem until we got this Cabrio top loader without an agitator. I would not recommend this washer to my worst enemy, if I had one.

Four years ago, my wife and I also purchased a Whirlpool washer and dryer set, washer model no. WTW6600SB2. Within the first year we had to replace both pumps twice, user interface, and control board. (I think that’s what it was called). Of course, that was all covered under warranty. But I to had to wait a week for the part and then another week for the repairman to make it. The user interface and control board had to be replaced because moisture got into the control panel and caused corrosion on the circuit boards which caused them to short out. Then it wasn’t long after warranty ran out, the whole wash tub and drum just dropped to the floor with a full load in it. I don’t remember exactly what was the cause of it, but I do remember it cost me $580 to fix it. Then it wasnt more than two weeks later, the repairman had to come again and replace the control board again. There went another $600 for the parts, labor and service call because this time they had to come from 40 miles away and it’s a minimum fee of $89 just for them to drive up here and another $60 for diagnostics, and then the part and their time to install new board. I paid for this machine twice in the first year and a half. Then after all of that, it was finally working like it should and worked great for about 6 months, then came the UL,LD, and Lid Lock codes over and over unplug, plug in, unplug, plug in. That lasted for about a month, and then all of a sudden, it straightened out. And we only got the occasional UL code. Now in the last year, I have had to replace the drain pump twice and then the drum and motor dropped on the shaft allowing any loose change or other items if accidentally missed during pocket searches to fall into the outer wash tub and get sucked into the drain pump and causing a quarter to be shoot through the drain pump making a hole and caused my laundry room to flood. Well, I decided I wasn’t going to buy another part so I used a plastic repair kit to fix the hole and got it up and running. A week later, the washer won’t wash. It will fill and that’s it. So upon my own diagnostic, I came to the conclusion that it was the user interface that went out due to corrosion I found on it. So for another $120 I can fix it, but I’m not sticking another dime into the washer, nor will I ever buy another Whirlpool appliance. Once all of my Whirlpool appliances die, I will replace them one at a time with LG. I to contacted Whirlpool about my problems and all they did for me was send me an extended warranty offer for 50% off, really that’s it, that’s all I get is a big GFY after all the money I have stuck into this piece of scrap-metal. Well, never again will you have my business as long as I live. Whirlpool, you need to take your hoo-ya and do something about all of these complaints.

I purchased a condo last year with all appliances included. My Whirlpool refrigerator model is GI6SDRXXY00, a fairly new refrigerator. I noticed orange and moldy spots on ices when dispensing them. I changed the filter, thought maybe it is the filter causing the issue. But after inserting the new filter and emptying the entire ice tray, I still get bad ice! I open the compartment, and surprisingly, found out that the spiral rod inside the ice dispenser was rusted! This is horrible and unacceptable! This is not a user fault but a manufacturing defect. The parts that are in direct contact with what customer consumes should be robust and safe. I contacted customer service, and they gave me a technician phone number which turned out to be a third party which only cares about money. They said they will inspect the refrigerator and will charge me $134.00. I will not use this refrigerator anymore and will replace it soon. AND I will never purchase any more Whirlpool products. This manufacturer is crossed out from my list of vendors who I do business with.

This ref model # wrf736Sdam13 is less than 6 months old. The doors have never lined up. At the top is a 3/4 gap and it is 1/4 at the bottom. This is a side by side. Sometimes the left door will open on its own. If you stand to the side and look across the front, the left door sets out about 1/2. My wife and I have contacted whirlpool many times and they will not do anything. I am ready to get another ref and get what I can for this piece of JUNK. We built a new home and purchased all whirlpool appliances and do not like any of them. Will never buy whirlpool again. Very dissatisfied with all – RANGE, DISHWASHER AND THE VENT HOOD. PS, the vent hood sounds like it is crushing ice when you cut it on. Very, very DISSATISFIED with all of them.

My last fridge leaked all over the floor. Mice were living in it also roaches. My landlord didnt believe me though Ive shown him several times. He didnt want to spend the money. Luckily his wife came over and saw how bad it was so she got a new refrigerator for me and it has been a blessing ever since. It is just the right size for my apartment.

I have used Whirlpool products for over 30 yrs. This is the worst made product I have ever purchased. The ice maker doesnt produce very much ice. The cold water on door isnt cold. There is too much wasted space in freezer and refrig. side. You cannot get anyone to call you back to call for help. I contacted Whirlpool over a month ago. No return call yet. Consumers beware!! Model no. WSF26C3EXF01.

We bought a brand new Whirlpool dishwasher around 2 years ago. Within 13 months it stopped drying dishes, silverware etc. I called customer service told the person what’s going on. Of course the warranty was up, a month prior. She said she would send a service technician out to see why it wasn’t drying. They charge 75$ a hour plus a service fee for coming out. I told her no. She said she would drop the service fee since it was only 13 months old. I asked how long he would be here, she had no idea. I didn’t make the appointment because I felt I shouldn’t have to pay anything because it was only 13 months old.She didn’t agree. Since then it has gotten worse, it doesn’t dry anything, maybe the dishes. I have to put the silverware rack on a towel by and dry the silverware or put it away wet. I’ve bought jet dry a few different ones and no luck. I would not recommend anything from Whirlpool, especially a dishwasher. We have new wood cabinets. The cabinets will get soaked if I don’t put paper towels under them. This is the worst dishwasher I ever owned. Don’t waste your money!!

We purchased the Cabrio Washer and Dryer from Lowes during a Black Friday sale, November 2016. The items were delivered when we closed on a new home. Thus, we didnt start using the washer and dryer until 3 months after purchase. One month after usage we had our first service call. To the point, what the other reviews say are the exact experience that we are having. Unfortunately, we did not do our research before buying. The washer: Clothes come out wrinkled, littered with lint, and the wash cycles are excessively long. The dryer: Clothes take a long time to dry, and most times we run the dry cycle twice because, after the first cycle, the clothes are still damp.Even though the washer and dryer can accommodate larger loads, we are forced to break out the laundry into smaller loads to get better results. Still, doing the laundry is negative experience with the Cabrio. Recently, it took nine hours to fully complete 5 loads of wash. That included the dryer cycle. The repairman said that he is well familiar with the issue. It is the new technology. The software is incredibly sensitive and can fault easily. This leads to another negative feature. The software is restrictive leaving the user with little control over how they want the wash and dry cycles to perform.Going back to the conversation we had with the repairman. He said he had a Whirlpool washer and dryer at home that was over 10 years old. The old fashion kind with the dials and less complicated technology; and he has never had an issue. I have to agree with that. Our second home has the Whirlpool Duet (washer and dryer) that are 13 years old. Never had a problem technically and with washing and drying clothing. We plan to try to contact Whirlpool about their return policy. Not a quality product. Definitely cannot recommend this washer and dryer. We truly purchased junk.

I purchase a suite of Whirlpool Kitchen Appliances April 2017. My range is the slide in model. The knobs are on the front of the stove top. I 4 months in I saw that the paint behind the plastic panel where the knobs are was chipping. Also, the gasket in the oven had some loose threads so I finally decided to call the warranty. Whirlpool paid for the gasket to be replaced but Customer service said the chipping was cosmetic and that only covered for 30 days. I am so disappointed in this range and Whirlpool. My stove looks very used after 10 months. I followed the instructions on what to clean it with and how to clean so I know its not me. The paint chipping is crazy! How as consumers do we deal with this? This Range was a cost over $2000! and they give me touch-up paint!I purchased Whirlpool because I researched prior to purchasing my appliances. I thought I was buying Quality, this is not quality! At Christmas I had a pot of potatoes boil over and the element circle on the glass top cam off with cleaning. This too is not covered because its cosmetic. Ironically, my old glass top Whirlpool range did the same thing. That why I got a new one! I guess it still works. Who cares how it looks... RIGHT? Well, I WAS a good Whirlpool customer. Not anymore! Do not purchase Whirlpool glass top ranges unless you want it to look worn out after less than one year. I have tried to post pictures but this wont let me paste them!

I have a lower end 4 burner model but I love it. Both power burns are in the front (I would change that) and electronic ignition. The oven temp is true and heats up quickly, I bake upwards of 700 cookies at Christmas time. Even being a lower end model it works great and I use it everyday. I think it is more energy efficient than the model that I replaced, which I replaced in order to have the electronic ignition. I would recommend this Whirlpool Range!

Bought a new $899 dishwasher 7/2020 and it stopped working 10/2020 And it’s been weeks and now I’ve been told it will be another 21 before they can replace it if at all! #whirlpoolusa #whirlpoolcorp Customer service lady was rude with an attitude.

Model # WRF990SLAM00 Ser# K23919328 - It should be possible to rate this piece of junk zero stars!! Purchased on Feb 2013, it is driving me and my wife insane. It is noisy compressor wise all the time (Our kitchen and living room in the townhouse are one room). The problems started after the hurricane in 2016 killed our power for three days. I had to shut the refrigerator down to manually defrost the freezer section because the fan on the fan-coil was hitting a huge accumulation of ice. Then the weird blackouts started approx once per month where the panel light as well as the interior lights went on and off every minute with that dreadful BEEP. This went on for over 24 hrs and made living in the same room HELL. The beep and three clicks happen every minute and the cooling is none. Whirlpool service came ($80.00) just to look at it and will come back with the rest of the bill which probably will be astronomical. I feel cheated big time!! Minute and the cooling has worsened big time. Whirlpool service came ($ 80.00) just to look at it and stated it needs a new computer board as well as a new front panel on the left door.

Ive bought two (2) whirlpool dishwashers in approximately two years. Both dishwashers stopped draining shortly after one year. I checked the filter, removed parts at bottom of appliance and checked the drain hose and my home drain to make sure that none were clogged. After testing the draining system a burning motor smell started to occur. At that point I disconnected and threw away the appliance. I dont know for sure but I think this is a recurring and known defect.

We purchased a brand new Whirlpool refrigerator in December 2012. It is model # WRF989BAM, a French door style with the freezer in the bottom. We have had problems with this refrigerator since a few days after it arrived. The first occurrence was when we arrived home one evening to find water all over the floor, and food thawing out inside the freezer. Everything had to be thrown out or placed in a different refrigerator. I have no idea what that repairman did, but luckily that issue hasnt happened since. Something about the temperature controls. We have also had frost on the back inside panel, and it leaks inside the refrigerator constantly, so bad that we have to keep a large bowl inside to collect the water, and it has to be emptied two or three times a day. We have had two repairmen out to look at that. The first one installed a new filter, which seemed to fix the problem...for about a month until it started leaking again. They tell us these filters must be replaced every 3-6 months...interesting as it says on the refrigerator every 6 months. Regardless, we cant get a filter, or any other parts that the repairmen think it might need because parts take months to arrive. We bought this refrigerator under the recommendation of a technician who came out to repair the refrigerator we were replacing. Buy American he said. They last longer and the parts are easy to get. What a joke!

My Whirlpool is reliable, however it does not have a soaking cycle which I would enjoy having. It also has an unbalancing problem when speeding if I attempt to wash heavy loads on the extra large load cycle. However, it responds very well on large loads for heavy washing. Shortly after I got it the timing had to be replaced, but no problems since then. Overall pound for pound for the dollar it is a good machine.

Old stove does the job. I need a new and updated one. Need a warming drawer. Lower drawer does not close properly anymore. Paint on back panel is chipping. We are limited to range choices because of space.

Informed that because washer was 1 year out of warranty. It was 2 years old. Parts were not guaranteed. Cost to repair $400.00 including labor. Maytag Store came to my rescue and it only cost $200.00. 2 years later, washer is not filling with water correctly. Have mixed feelings about repairing or replacing. If replacing, how to select a reliable washer. How do you select, if when we purchased this washer it was rated very high. Whirlpool does not help with any issue. They were extremely rude. Felt helpless dealing with them. Need a new washer and have no idea which brand to go with.

After almost 5 years of satisfactory performance, our $1200 Whirlpool Duet washing machine WFW9400SU1 requires repairs costing over $1100. Similar to another complaint listed, some parts rusted out, leading to extensive damage during use, which we realized only after the spin cycle became incredibly loud. Now the entire gut of the machine (bearing, drum, arm, casing, etc.) needs to be replaced - $900 parts and $200 labor. I trust my repairman (who said theyd seen this type of problem before with Whirlpool) especially because he recommended buying a new machine instead. I called Whirlpool, and they said they could do nothing for me which made me very angry. This is a mechanical problem that could have been avoided by using proper materials. Whatever happened to the washing machines that would last 15-20 years?

The gas water heater that we purchased has been a headache. Pilot went out several times. When we contacted Customer service they informed us that we would have to have a new kit put on it. We ordered that and it worked a while and then we started having the same problem. Just recently we had to purchase another part and once again we have cold water. Fed up.

I have had my refrigerator for more than 10 years. It is a standard refrigerator with no extras and I have never had any problems with it. I think things that dont have too many extra built into them are better with not so many things to break down.

I bought my Whirlpool Cabrio washer from Lowes in Statesboro GA on 2-14-14. I did purchases an extended warranty on it. After 11 months is when I started to have my problems. I was washing my clothes. I did not hear my beep on my washer. After 2 hours my laundry should have been done. I stopped on the wash cycle and shut off. I put it on the rinse cycle thinking it washed my clothes. It shut off during the rinse cycle. I called the Lowes repair. ** was to come the next day, He did not show up. I had to call again. It took 2 more days before he came out.It takes over 6 business days before I get my part. I have to have my laundry washed else where. It did the same thing again. I called. ** came out. He ordered the other part. It took 7 business days. It came in Tuesday. I tried to wash my daughters comfort on Wednesday. It did the same thing. Shut off during the wash cycle. I called at once. ** was to have been here Thursday. He never showed up. I called Friday. They said hell be there by 5. He still never showed up. I called back today .This time ** called me. He said, “So you tore it up?” I said, “NO it’s still doing the same thing.” He said hell be here tomorrow between 8-12. I am so tired of this washer. I even asked if I could get a replacement. They said no. I said this is stressing me out. I am on anxiety pills already. This is not doing any good. I paid all the money for this washer and it does not work. I have to arrange to have my laundry done some where else. All they said was sorry.This is the worse washer to buy.

This is a defect due to the removal of the dispenser heater being removed. The insulation is inadequate behind the ice/water dispenser (@ 3 feet from the bottom of the door.) Replaced the line, thawed it out multiple times, added extra line under the fridge in the coils to try and warm up the water in the line between the 90 degree elbow connector and the dispenser... no luck. Since all the manufacturers models are being assembled in Mexico, using the same designs, other models are have the same issue. GE is backing theirs with a replacement freezer door. Well see if Whirlpool backs theirs. This whirlpool Gold is @ 3 years old and the issue started around a year ago.

I purchased a Whirlpool French Door refrigerator (G16FDRXXY07) from h.h.gregg appliances and electronics in Columbia, South Carolina, on August 3, 2012. It was delivered and installed on August 11, 2012. It functioned well for three weeks, and then temperature of refrigerator dropped to 25F. Vegetables and eggs got frozen. I made a service call to Sloan Appliance Service as soon as I was aware of the problem. In the 3rd visit, the thermometer was replaced after troubleshooting. After replacing the thermometer, the temperature of the whole refrigerator got higher than it was supposed to be. Refrigerator got around 53F, and freezer got 34F. All foods in the refrigerator got spoiled. In the past six weeks, the company sent technicians to my house to check the problem, and they tried to fix this refrigerator for 5 times. The situation got worse and worse. I have not had a functional refrigerator for 6 weeks. A technician came with a compressor on 10/22/2012 to see if replacing it could fix the problem. When he cut the copper pipe, he found that refrigerant was leaked out. There is no refrigerant at all. He refilled refrigerant without changing compressor. Because he thought the leak was slow, it should be caused by the evaporator. He thought it should work and last long enough when a technician comes back with evaporator replacement. It turned out what the technician thought was wrong. The temperature of both refrigerator and freezer did not drop to normal, 53F/34F. The problem persists. I called Whirlpool customer support line several times. The response I got was that Whirlpool would not replace for having manufactured a faulty appliance during manufacture warranty. They can only keep sending technician onsite to check and repair. For 6 weeks and 5 times onsite visits/repairs, this newly purchased refrigerator still does not function.

I am writing due to the defects and flaws in my recently purchased appliances. I chose Whirlpool believing I was buying the highest quality for longevity purposes. Every appliance I own is Whirlpool or Maytag - same company. I purchased warranties and was told the warranties dont cover my issues and was basically brushed off. I am infuriated. Here is a list of complaints. Refrigerator is cracking on the inside on the inner door and at the bottom. These cracks surfaced within the first year of purchase. The warranty does not cover cracks in the inner body.The oven/range has an exhaust that bellows out of the top of the range in a way that the smoke curls up onto the panel and discolors it. I have never had an oven constructed with an exhaust pipe in the front that pours smoke onto the range itself and into your house. The dishwasher paint has rusted off on the door as have the screws on the inside of the door. The cover panel on the cleaning dispenser of the washer has popped off and cannot be popped back on, hence the guts of the dispenser are always visible and when I go to load the cleansers the front has to pulled out from inside the dispense.The refrigerator is also leaking from the bottom and the ice-maker no longer produces ice. This started off and on for the past 2 years. At first I thought the leak was from a near by window. No it is the refrigerator. All of these appliances were purchased in 2013, 14 and 15. New. I am 56. I have never had issues like this ever in my life growing up or as an adult. Appliances lasted forever. I am one person. How much damage could I do? None.These are flaws in chemical compounding of the paints and materials for cracks and rust. Whirlpool was called various times and was not interested in sending a rep to verify my claims. They said all of my warranties did not cover such issues only motors. Lots of many spent in vain. I will not purchase Whirlpool again as they seem disinterested in customer satisfaction.

Moved to new house with new Whirlpool appliances, including oven, in August, 2015. I did not cook in oven at all until Thanksgiving meal. Had something spill over in oven. Spillover caught fire. Oven at 350 degrees. Complained to Whirlpool. A supervisor told me that it is normal for spillover to catch fire. They sent out a tech to check oven, and said I would be responsible for paying tech. The tech explained that unlike conventional ovens, this oven has heating elements outside of oven, so to get to the temperature of 350 degrees, the heat at the bottom of oven can get to over 550 degrees. He could not get Whirlpool to replace oven. I didnt have to pay, but now I am afraid to use it. Some of the finish on the inside of the oven was burned away, so it is not like I can trade it in. I feel the oven has a defective design if spillovers are supposed to catch fire while you are cooking, and the finish gets damaged. I will never buy another Whirlpool appliance again, if I can help it.

Love the dishwasher, except the racking which has some top rack channels which are too small to be used by glasses, mugs, etc. The Power On/Off should automatically power down when the cycle is finished. Too often when someone leans against the dishwasher while opening the overhead cupboard, the dishwasher will start up because the unit was not powered down.

The unit hasnt given me any trouble over the two (2) years we have used it. The bottom freezer works well and was a concern when buying, but has worked out well and convenient, but you must keep the refrigerant coils clean.

Was baking a pie when suddenly noticed the electric range had caught fire underneath the bottom of the oven. I could see partially through the slits inside that the heating element was on fire. Could not get to heating element as it covered. Shut the door and turned the oven off so the fire would die out. DO NOT BUY THIS PRODUCT. I was baking pecan pie. Whirlpool is no longer a quality brand. Washing machine bought at the same time has been repaired twice since owning. Also, Aqualift technology is a joke. It doesnt remove any messes burned during cooking. I wish Id stayed away from this complaint. Bought a stove, washer, and dryer. Dryer has been the only appliance we havent had a problem with. We saved over a year to ripped off by Whirlpool. I expected a washer and stove to last far longer than 3 years. Actually would be 3 yrs come December. So disappointed.

I bought this dishwasher in Nov. 2018 to replace one that was barely working. I have enjoyed using it much more than my old one. Its very quiet and does a great job of cleaning dishes, pans and silverware. The only problem we had was installing it. The leveling screws do not hold their height adjustment when the dishwasher is pushed across the floor during installation because the leveling screw pad was changed from steel to plastic and the tapped hole for the leveling screw is too loose. The effect of this - whereas the steel pad would slide the plastic pad will grab, turn and move the leveling screw out of adjustment. Especially if its tapped hole is too loose. So we went to Home Depot and bought 4 5/16 nuts and used them as lock nuts on the 4 leveling screws. This cost 50 cents. Once we installed it everything worked perfectly. It does take longer to complete a cycle than my old one - 3 hours vs. 2 but it uses less water and does a great job of cleaning. You must use a drying agent with your dish soap or it wont get dry enough. Also, if you use the short 1 hour wash it wont have as much time to dry and some dishes wont be completely dry. I usually wait to do a full wash with the normal cycle - 3 hour.

I purchased the Whirlpool Cabrio washer and dryer in 2007. They have been the biggest pieces of junk. One year after my purchase, the water pump broke and had to be replaced for $100 and that is with my husband doing it. Then the dryer broke twice. Now, the washer is not spinning. He took it apart and I purchased $80 in parts. It still doesnt spin. He thinks the motor went and it gives a p50 code. This washer does make holes in your clothes. So many of my summer tops were ruined because of this washer. A friend has the same washer and she started getting the holes in the clothes, so that is how we figured it out. Today, I went and picked up a washer at my rental home, a GE that is 10 years old. My clothes never felt cleaner and it runs like a charm. That Cabrio always smelled like mildew because it seemed like all the water didnt drain out of it and it would sit in the bottom. What a shame. Its only 6 years old and I paid $800 for it and for parts. My husband cant wait to put it on the curb on garbage day. My friend warrantied hers and when the guy couldnt fix the problem, they gave her partial money back. At least she got something. These should be recalled and we should get partial money back depending on how old it is. I will tell everyone not buy these. They are the biggest pieces of junk!

Last year I purchased a Whirlpool washer at the suggestion of a friend who works at Lowes. It was dented and reduced, but my 20 year old Maytag, although still chugging away, was due for replacement. Am I sorry I did! My husband has recently broken his hip and we were caught in Hurricane Matthew just 1 day after I brought him home. We were forced to evacuate. Upon returning with a mountain of laundry, I found my washer lock light blinking although the washer had not been running when we lost power. I tried opening it but could not. I unplugged and reconnected power to no avail. I called customer service only to find we had to wait 2 weeks for a Whirlpool repair person. He arrived yesterday (Oct 26, 2016) and charged $95.00 to tell me this was an almost universal problem with Whirlpools and the company was aware of it. He called this morning to tell me the required part would cost $495.00! The entire washer cost approx. $500. He stated that he thought Whirlpool should have covered the cost as it was not far out of warranty and a known defect, but he could not get Whirlpool to assist financially. I tried calling myself for an explanation of the fact that they knew these machines had a defective part and yet they sold them. I got a song and dance from the rep. Although my husband was unable to help and I am a 65 year old woman, I went out and bought the cheapest machine I could and manhandled it home and connected it. It is afternoon and I am on my 4th load of well overdue laundry, no thanks to Whirlpool. I intend to make this story public through every internet forum I can find. I have a large extended family and friends and I will make sure they do not purchase Whirlpool appliances if they are looking for a good product and good customer service. I will also be sure to never buy a Whirlpool appliance again.

Our Model # WRF532SMBW refrigerator was purchased on 8/21/14. In the last several months, it has begun having problems with ice build up in the bottom of the freezer, as well as water puddling around the front legs on the floor. I called Whirlpool and they suggested it was our water line, but it does not leak onto the floor daily. They then suggested I have a serviceman come out for a $120.00 service call, plus whatever other expenses that occur. Or, I could just pay $322.00 and that would take care of the service call, parts and an additional one year warranty. We just bought this refrigerator 23 months ago and it cost $1618.92. Now I need to spend $322.00 additionally! What a rip off. Do not purchase a Whirlpool Refrigerator or any of their other appliances. I see this is a common complaint and wish I had read the reviews earlier. The appliance is only 2 years old.

This piece of junk just broke down not even one year after the purchase. Every singe Whirlpool washing machine has broken one way or another. This one will set the wash time for 57 minutes, and exactly 24 minutes left in the cycler, you hear this big crash and then everything stops. Another dumb thing about this piece of crap is that when the problem happens, the POS keeps the lid locked so that you cant tell what the problem is. What morons would put a lock on the lid? Its not like someones going to take a jacuzzi bath!Restarted the POS again, and exactly 24 minutes left on the wash cycle, there was another crash. Both times, exactly 24 minutes. NEVER BUY FROM WHIRLPOOL!

Light bulb went out in the freezer. Come to find it is a led cluster with a circuit board only cost $30 to $100. Engineer should be fired. What is the reason to take simple bulb and custom bastardize into an expensive hybrid. Greed.

Whirlpool duet steam front loader - The rubber gasket ripped about a year ago and cost over $400 to have a tech come and repair. Then the water level switch got bad and cost another couple hundred. A year later, the rubber gasket ripped again. What a junk washer. I am ready for a lawsuit because Whirlpool will not replace it.

Have had no problems and we have both washer and dryer Duet and love them. We need to make sure we keep the washer door slightly open to avoid mold. The dryer lint filter is a little difficult to vacuum out.

Recently, I was having a problem with my Whirlpool gas range so I contacted the 1-800 number. Long story short, the repair cost was so high I would be better off getting a new range. But believe me, it will not be a Whirlpool.

Whirlpool Refrigerator Model WRX9885IBM01 French Doors - We purchased this $2,000+ dollar refrigerator in December of 2014 and within two weeks of plugging it in, we noticed the freezer drawer was crooked and ice crystals in the freezer compartment. We contacted Whirlpool re the matter and they dispatched a local serviceman. He informed us that the inner lining of the refrigerator was crooked and he contacted Whirlpool. He sent pictures of the crooked drawers and was advised by Whirlpool to adjust the outside door, but nothing could be done for the inside crookedness and that he was to take silicone and seal the refrigerator to prevent air coming in to create the ice... Really? We told him that was merely a Band-Aid to the problems and we wanted a replacement. According to Whirlpool, they can only service our month old refrigerator and cannot replace it.Actually, they cannot even service the defective product they sell, they can only caulk the problem until it comes again. I am not going to stop until everybody in the country buying a refrigerator thinks first about the warranty Whirlpool offers. After reading defective parts, etc., I am amazed they are still in business! We are contacting Lowes to come pick it up! Let them deal with the garbage they are selling!

I purchased this Whirlpool Gold Series Refrigerator WRF990SLAMCO in 2012 and it cost me $2400.00 from Lowes. Worst purchase I ever made!!! I will never again purchase or recommend a Whirlpool product. I paid for extended service agreement from Lowes. Before the first year was over, ice was forming on the inside roof of the refrigerator and the whole cooling system/grid needed to be replaced. Then the cooling system went out, followed by the ice maker (PS the ice bucket container was rusted within the first year), then the whole electrical panel on the front of the refrigerator where the ice/water dispenser is.For the last three weeks I have had water leaking out of the top of the refrigerator adjacent to the water filter. My home warranty wont cover. It is a $400.00 repair to replace the circuit that attaches from the water filter. I called Whirlpool 2/14/2017 to complain about the product. She tells me that there havent been any complaints logged about the refrigerator. Seriously??? Read your reviews! The gal on the phone offered a discount to purchase a NEW PRODUCT! Are you serious??? Take my advice. DO NOT BUY WHIRLPOOL. They do not care about their customers or creating a well made USA product. Ill buy foreign next time!

Bought this model from Bad Boy in 2006 and just after the warranty ended the problems began. We kept getting the F1 error code so with a little internet research we found it was a known problem with Whirlpool. I contacted them and was told they knew nothing about this issue being nationwide, however I emailed them copies of the complaints and responses. They sent out a technician who had to replace the motherboard free of charge. Next issue was a loud noise coming from washer sounding like a jet plane taking off. Hubby ripped machine apart to find the bearings blown apart and in tiny pieces. We ordered new ones and also found that when the new ones arrived they came with a tube of grease and a sealer to use so water would not get in later and cause more problems. Funny there was no sealer on the original bearings.Next the lid lock finally failed, ordered a new one but did NOT install it back into the machine, now it sits beside the machine. In case it fails again we will have total access to the laundry this time. Finally the UL error code keeps coming up. I refuse to put any more money into this machine again so I am allowing hubby to fix it if he chooses, whichever way he wants as long as no money is involved. So right now we have bungee cords holding the suspension rods tight to help with the uneven load code coming up all the time. Personal thoughts - DO NOT BUY WHIRLPOOL washer/dryers. They are crap and the company just does not care and they try to lie their way out of repairs if people have not done their homework.

Bought a brand new front loader washing machine and the 1st, 2nd & 3rd year has to call for service for the same problem! Sent one repair guy to the house and banged on my machine the whole time because he was frustrated and had to report because he made my wife nervous. Never again Whirlpool!

Brand new box so I bought some meat and placed it in the freezer. Kept it cold or partly frozen but never froze solid. Every time it went into defrost so did the meat. Found meat juice running out of freezer. Called serviceman out 5 times. He told me every time it was fixed. Finally, after 3 months it was fixed. I had to throw out all my meat but of course Whirlpool would never cover any replacements. I will never buy a Whirlpool refrigerator again. If they dont have a Q.C. Dept better than that and sell seconds as first I couldnt trust the company the next time. So sad!

We got a french door Whirlpool refrigerator about 15 months ago. Model Wrf757sdem01. There were problems from day one. Serviced about 6 times by 3 different companies... Died again less than 2 weeks ago. Finally the store decided to replace it. Was under an extended warranty. We have been without a fridge for over 10 days. It has caused multiple problems for us as we are out in the country. We have to haul ice to 4 coolers... Wait on the new one (a Whirlpool). Plumber had to be called in and he has had 3 of this same model replaced! Years ago you could trust Whirlpool. Now apparently not. I hope we do not have to regret our replacement one which still is not installed! By the way the water filters have to be replaced to the tune of 100.00 a year. We are not going to use an icemaker or get water from the new one.

We replaced our 20+ year old washer and dryer with a Cabrio set. I read the instruction booklet twice to make certain I did everything correctly. Ive washed two loads. Both times, the clothes were in a ball at the bottom of the washer. Everything was horribly wrinkled. DO NOT BUY this WASHING MACHINE UNLESS YOU want your CLOTHES to COME OUT in a WRINKLED BALL.

In my wildest dreams I wouldnt have expected that changing a burned out light bulb on a 7 month old microwave would put us out of commission for over a month. Its been 30 days now and Im told it will be more than 2 weeks before the part comes back in stock. Whirlpool had such a good reputation years ago, but thats history. This is a disgrace.

My $800 Whirlpool Cabrio top loader does not rinse the soap out of the clothes. Nor does it even get the clothes completely wet. After the final cycle I have soap scum in all the wrinkles of the clothes. Most dissatisfied purchase I’ve ever made. The one-star rating comes from the pretty blue digital displays. I’ll be purchasing another; this one goes to the dump where it belongs!

11 months after purchasing my Whirlpool 40 Gal Gas Water Heater N40T61-343 I woke to cold water one morning and found the LED flashing 4 times - high temperature shutdown. Unable to find any reset I called Whirlpool and after a couple questions, was sent a replacement control unit. Happily it arrived 2 days later. I was told then that it was because I had residue in the tank. I had no idea how he determined that because none of his questions even touched on that. Anyway, I had hot water.Nearly a year later now to the day and again I have no hot water. This time the pilot burns very weakly when I try to light it and then goes out. After three attempts I get 7 flashes on the LED - Gas Control Valve Failure, part of the same unit I replaced a year ago. Am calling tomorrow since its too late to go through any tech support steps over the phone that Im reading about on this site and seeing on Youtube. Honestly, I didnt replace the last heater because I had nothing better to do than replace parts on this one annually. No, I will not purchase another Whirlpool unit especially after reading all of the similar if not identical issues others are having.

Well, I read most of the complaints with the failures in the machine. I guess most of them didnt last long enough to rate their performance so here we go. I bought a Cabrio top loader, high-E washer a couple of years ago. This one had a different kind of agitator - it was just a couple of inches or so off the bottom. I specifically bought this to wash comforters and it seemed like it was good for that (rousing agreement from the salesperson). So after a couple of years of working with it, here are my observations:Pros: There are absolutely none!Cons: Okay, other than not having control over the settings (cannot override any of the preprogrammed wash settings), it simply doesnt get loads clean (yes, I use expensive HE detergent). Except for the bulky setting, there is never enough water to wash and rinse the loads properly. Next, it makes a mess of the clothes. At the end of the cycle, and this is true no matter what I wash or how large or small the load is or which cycle I pick - even light and slow spin, it just makes a tangled mess of the load. Stuff gets stuck inside of other stuff, wrapped around other stuff or are balled up. Never have I seen this type of issue. I constantly get the unbalanced load notice and have to manually redistribute the clothes most of the time.To address the too little water level, there are two options. I have discovered that the bulky setting has the highest water level, so I use that most of the time. From time to time (when I need different water temps or just want more water), I have developed a work-around by putting a Y adapter on the hot water inlet and a short hose. Once the washer starts the wash cycle, I stop it and add a bit of hot water to bring the level up enough to do a decent wash job - same for the rinse cycle. So much for Whirlpools water efficiency.Next, the hot isnt hot. Its barely lukewarm. So I turn the cold down to a trickle and I get a bit hotter water. It takes forever to rinse though. Its a good thing Im semi-retired. Next is the inflexible cycle/water selector. I have never had a washer I couldnt override to tell it what to do in unusual circumstances. Boy, what rocket scientist at Whirlpool dreamed that up!But above all, this just doesnt get loads clean. I have experimented with all the variables, load size, cycle selection, detergents, etc. Most of the time, I have to do two cycles with my loads and these are not unusual or extremely dirty loads. They are just normal, everyday laundry for an adult couple. Really, Whirlpool! Who was the conceptual designer on this? Thank goodness they werent working on the space shuttle or some disease research.Bottom line, I am so soured on the design and performance of this product that I will never buy another Whirlpool product, either brand name or generic (Sears). I just cant understand how a company would let something like this out the door.

I had a Whirlpool oven for 14 years. It worked great and the control board burned up during the cleaning cycle. I purchased a new whirlpool oven that did not have an exposed bottom heating element. It takes way too long to preheat and if during baking, you need to change the temperature, it starts preheating again and the displayed temperature is lower than the original temperature that was set at the beginning; and it takes too long for the oven to reach the new temperature. This appears to be the result of the bottom heating element being hidden. Heating and maintaining a consistent temperature is far more important than being able to clean the bottom of the oven especially when this is a self-cleaning oven.Updated on October 20, 2015: This is an update on my last review. I was cooking a cake at 350 degrees and when the designated time was up, I opened the door to check for doneness. The cake needed to cook a little longer, so I closed the door and the temperature immediately went to 300 degrees and started preheating again which of course caused the oven to get too hot for the cake I was baking. Who is designing these ovens??? Certainly not a person that cooks on a day-to-day basis. I will never buy a Whirlpool oven again.

I bought my home four years ago with a Whirlpool 50-gallon water heater in it. It was installed in December 2002. Well, my hot water went out. After being told I could go to Lowe’s because they would supply the part free of charge because there was a recall on the thermocouple unit. I went to Lowes. No luck there. They told me they didnt carry the whole replacement unit and I would need a number from Whirlpool. The guy at Lowes was very nice but said I was the fifth person to come in this week.I called Whirlpool and was told because I was not the homeowner that had purchased the item that there was no warranty on the product and that I would have to pay for the part. It cost $34.98 plus shipping, which was another $30.00 because I had it shipped overnight. Two days with no hot water was enough. Well, I got the part and hopefully there is nothing wrong with it as it was shipped in a box twice as big as needed with no packing what so ever.I just got off the phone with them again but this time spoke with a supervisor that told me there was no need for packing. There was no part of the entire assembly that could have been damaged. Will I ever buy anything with the Whirlpool name on it? Not only no, but ** no! Will I tell everyone I know about this? You bet. I am also going to write to Lowes and ask why they are continuing to sell inferior appliances such as these. I have to tell one realtor friend about this and just placed a call to another to tell him. The first had no idea that appliances that were marked still under warranty did in fact have no warranty at all if its a Whirlpool. I may write a letter to the editor of our local newspaper and hope that they will publish it to inform anyone reading the paper about these inferior products.

In 2015 door of top loading washer (Whirlpool Cabrio Washer) needed total replacement. Lucky I had an extended warranty. 2018 March, extended warranty expired and now have the exact same problem. Pretty crummy product if major part like a door has to be replaced every 3-4 years. We do not wash large items like blankets/quilts in this machine. That goes to a laundromat where there are oversized machines or to a dry cleaner. So the only reason for this breakage is a default in the lid assembly. There is only one phone number for customer service, repair, parts etc. Put in my service call and filed a complaint at same time hoping for at least a small discount. Ha! $100 plus tax for service call- part price ranges from $150-230 plus tax. Whirlpool could tell me the part exists but would not say how long it takes to get it! Do NOT buy Whirlpool washer with top load lid that has glass window. Big problem is that Whirlpool now has Jenn-Air, KitchenAid, Maytag and Amana all under their umbrella.

We purchased a Whirlpool Gold Induction range, model#WF1910H0AS0, from Lowes Home Center for ~$1700.00, about 1.5 yrs ago. One night my wife was cooking dinner on the stovetop and she heard 2 loud pops and the whole cooktop went dead. We had Bobals appliances repair look at the range and they gave us an estimate of $800.00!! to replace the module board. The repairman said the module board had shorted out and burned. Thankfully my wife wasnt electrocuted. I contacted Whirlpool customer service, they said, There isnt anything they can do. The warranty is only 1 year. I also contacted Lowes customer service. They told me the same thing as Whirlpool, nothing they can do, 1 year warranty, etc. I have the part# of the module in the stove, W10390743, serial#31811552. After an internet search, this part # had been superseded, which tells me Whirlpool knows they have a problem. These ranges need to be recalled. I plan to contact the US consumer product safety commission to initiate a recall. Please inform consumers if they have this Whirlpool induction range with this problem, to also notify the Consumer product safety commission.

These are the worst sets in the world. We bought this set from a hometown store, had them 6 months and all belts on dryer had to have the belt on the dryer replaced, then 2 months later the washing machine went out, so the store did replace both and weve had them about 3 month. The dryer works great so far, the washing machine on the other hand not good at all! The tray where the detergent goes continues to have mold/mildew in it, the clothes come out of wash cycle smelling soured. We have this set inside and we keep our temp set on 67 in our home. There is no excuse for all the problems, not to mention that noise it makes when it washes!! I am completely disgusted!!

Whirlpool Gold Freestanding Accu bake Duo FIRE HAZZARD - We bought our house August 2013 and we were SO happy to see the stainless steel appliances and we thought Whirlpool was a good brand that our grandparents stood behind for years (they obviously havent bought from them in 50+ years... times must have changed for the worse). Anyway, I got all moved in and was fixing supper and noticed how REALLY dark and greasy the oven was. I could barely see inside because the coating of grime was so thick that it dimmed the light by being so thick over the glass bulb cover. I immediately thought Wow... the past homeowners were nasty and lazy because they have this nice self-cleaning oven and dont even bother to clean it. I noticed it smelled slightly like it had a gas leak somewhere when it was preheating but it cooked the supper okay that night.Because it was hotter than a jungle in NC in the summer heat of August, I decided to wait until winter to use the self-clean... thought it would warm the house as it got rid of the gunk, right? I kept using the dark coated oven about a total of 25 times and always noticed the faint gas smell at first when it would preheat. I thought maybe it was SO dirty that the oven seal wasnt working right and since it was now November, I figured I should just run the self clean cycle and maybe it would make it run properly as it was REALLY dirty and the igniter or something may actually be clogged. I figured it would probably stink a little at first when it started the cleaning cycle because of the excess build up but it needed cleaning so bad that I cleaned it... The smoke alarms started to go off, we just disconnected them for peace and quiet... Our throats and eyes were burning and it smelled more like plastic burning... FOR HOURS it was horrible! The walls and the Terracotta tile floor were flaming hot!!! The next morning the house actually smelled like it had caught on fire and it stayed that way for weeks!The oven was very clean inside after the cleaning BUT the oven is now totally useless! It will not stay lit. I have never been able to use it again as it will not come up to temperature... just clicks over and over and hisses trying to light. I tried again today and it started LOUDLY hissing like a big open gas pipe was on in there and I got scared and cut it off. THANK GOD it went off!I have been reading similar complaints about Whirlpool Gold ovens for a couple hours now and I am truly scared to use this oven now. After reading the comments of the hundreds of dollars it will take to get it to bake again and how most people STILL had the same reoccurring issues and NO help from Whirlpool... Well I decided to share my experience in hopes that if anyone else is reading this... and I am sorry to say... Well... you are not imagining the problem either. We never read these blogs like this BEFORE we buy or use our appliances, only AFTER something scares the crap out of you and you look for a recall. If I could afford to sue Whirlpool for a replacement then I would. I wish everyone could afford to sue Whirlpool for their unresolved issues that have cost them unnecessary expenses due to the customer loyalty we have had for Whirlpool as we used to be taught You get what you pay for and Do not go with an off brand because those companies go out of business when you need them to repair or service stuff. Am I the only one that was taught this? Times are very hard now and the economy is getting worse and now we have to be screwed by big companies like Whirlpool getting rich off of hardworking people and they do not care enough o help pay for the poor workmanship issues they are making. Shame on you, Whirlpool. I am taking the rest of the day to read reviews on a replacement stove so I can get this ticking time-bomb out of my new home. I too have read enough about the same oven that others have had worse memories than I did. I will not waste anymore of our hard-earned money on Whirlpool ovens. You have to decide what is good for you....

Purchased Refrigerator (WhirlPool Refrigerator WRX988SIBM03) 16 months ago and noticed the drawer with glass that house the drawers had a crack on the right side. Couldnt believe it was cracked after such little use with just two adults living in the home. Removed it and noticed this was such shoddy design. There is a heavy metal bar in the back with a piece of flimsy plastic that attaches to the heavy metal bar with only a screw attaching the plastic to the metal.I made attempt to glue it since it was only cracked but then the plastic just started crumbling into pieces like a broken cookie. Truly there is something wrong with the quality of the product as well as the design of having this heavy metal bar attached to this flimsy plastic. The quality of this part only leads me to believe what is next with this refrigerator. I am sure there is more to come.I contacted Whirlpool to see if they would replace but of course this is at my cost. Ive had inner parts of refrigerators break over years of use and they get old and busted up over time but this is a new refrigerator and once I inspected the part, I was disappointed with myself for not removing these inner parts and inspecting prior to purchasing. I would have picked up on the poor quality right away. Taken by the outside of this unit and its beauty, and not truly looking at whether or not the shelf can hold a couple gallons of milk. I am here to tell you there is no way this would have withstood the test of time with only a gallon of milk sitting on this unit. Poor design, poor quality and metal attached to raw plastic as it is a disaster.

Purchased a washer on 8-29-2010. On 2-15-2012 transmission went bad. I called Whirlpool, they will not stand behind the product and wanted me to buy a warranty and then they will come out and repair the machine. Great customer service. Build a bad appliance and get the customer to pay for warranty. Do not purchase Whirlpool.

Have a Whirlpool side by side about a year and a half old. Fridge started getting warm, so when I contacted the Whirlpool co, they informed me and sold me a year warranty to cover what the problem is and anything that would go wrong in the next year. The warranty is through Assurant. After contacting them, I found out they could not have a repairman out for another week. Wasnt happy, but nothing I could do. They found out the compressor was bad, ordered the part which showed up the next day, but could not come out to install it for another week. Getting more upset. Put it in and my fridge was hotter than before. Called and they could not have anyone out for (you got it) another week. The new compressor was bad. Ordered a second one, came the next day, and they put a rush on the repair so I only had to wait 4 days this time. Guess what, it still does not work. Had to wait another 4 days for someone to come out. So tomorrow is the day. We shall see will it be another compressor and another week to put it in? I never heard of any company stretching a repair over a months time. I am so angry with Whirlpool, Assurant and A&E repair company; you just dont know. I would not recommend buying or going through these companies. This is very unprofessional.

I bought my washer machine because my other one died on me. I was nearly everyday so I needed a dependable machine but also good price. This machine is both and I would definitely recommend Whirlpool.

I have had this refrigerator for over 25 years and cant ask for anything better than that. Would buy another Whirlpool refrigerator. Has original french doors at top and bottom door on freezer. However, I dont particularly like the pull out drawer that the new refrigerators have now as I get so much more room with a door. The new refrigerators have improved rubber around the doors. That is the only thing I had to replace on this refrigerator.

Handle needs smarter design. I purchased model #WRT311FZDM00 in November of 2015, didnt install in my new home till December. I am a single senior female, so there is little wear on the fridge, unlike a family of several people and with kids. The door handle actually broke just behind the screws that hold it in place, the plastic part of it broke into a couple of pieces. The cost to replace this handle is approximately $80, which is ridiculous in my opinion. Please start making things of quality materials instead of cheap plastic, especially at a stress point of a part. Even I know better than that. All 4 of my major kitchen appliances are Whirlpool, as well as my washer/dryer. I thought I was buying quality products. Hopefully things will hold up better with the other ones.

We had a Whirlpool washing machine 650s, fully automatic on 28.07.2011 at M/s. Next Showroom Reference bill number 910, Sr no INF **. We had attended, 2 times, a problem with the digital board. After advice from your Whirlpool service person, we had fixed it cutout (make whirlpool), but now, its the same fault with the digital board. Kindly take further action regarding this same problem and sort this out immediately without any further reminder.

Cabrio fabric washer and dryer sucks. I gave almost $500 for a piece of **. Doesnt get the clothes clean. Hell most of them dont even get wet. Its junk. Wouldnt have another one. Lowes junk and the dryer aint know better. Its always flashing check lint even when its clean and you have to ** with it just to get it to start.

We purchased an over-the-stove Whirlpool microwave in January 2011, when we remodeled our kitchen. In May 2014 after a loud pop, the microwave stopped working. This was Model # GMH6185XVS-1. Of course, the warranty is no longer in effect. I feel a high-end appliance that cost $500 should last longer than 3 years. I will not purchase another Whirlpool product.

We purchased a brand new Cabrio washer and dryer in December 2010. We didnt move into the new house until February 2011 to start using the appliances. Last week, we called a repairman in to see what was wrong with the machine because it was making such strange sounds. He said it needed 3 new parts including a gear. The gear he took out was broken and gummed up with soap. We were told by an appliance salesperson that the water should never have been able to get to the gear. Parts were to be here by Tuesday of this week and the machine repaired. They called to reschedule yesterday. I called them this morning and they said the tub and another part would be delivered today, but the gear would not be sent out until September 12. This is a brand new machine which was obviously sent out of the factory with a defect. It doesnt clean properly and sounds like an airplane ready for take-off. I have never heard a machine this loud.We are going out and purchase another brand. My advice: Dont buy Whirlpool!Donna

Mine is a stacked unit...saves space and I just love the stooping over factor... BUT, its an energy saver and I always have to add about 5 gallons of water to it for it to cover even half a normal load...ugh!!!

I purchased my Cabrio washer and dryer 2 1/2 years ago, and for the past 6 months, I have dealt with it being unbalanced and I tried everything to get it balanced. When I researched the problems, I found so many other consumers are having the same problems and that Whirlpool will do nothing about it. I decided to start a petition on Change website to try to force Whirlpool to stand behind their product and correct the problem, offer us a refund or another product, or even fix the darn thing. It is tough economic times, and we spent money to have something that was energy-efficient as well as a product that is supposed to carry a good name. I am a single mother with three children, and I dont have a $1000.00 to throw away after 2 years. This is shameful that we, the consumers, have to deal with this. Please go to the Change website and sign my petition. The more signatures I get, the more leverage we have to deal with Whirlpool. Lets pull together and show Whirlpool we will not stand for them robbing us of a quality product. Thank you so very much.

Efficient. I like the look and the controls. I trust the Whirlpool brand, but have purchased other brands. This is probably the best dishwasher I have owned. My only regret is that it is louder than expected.

The washing machine has been through 4 boots. The boot material is so flimsy, that they tear constantly causing water to leak out of the machine. There are times it is minimum water, and other times a lot of water.

Aqualift cleaning does not work. I am old with bad knees and do not need an oven that has to be cleaned manually. This technology is a joke and everyone who bought one should be reimbursed. One reviewer indicated that there should be a class action lawsuit for this situation. I agree!

I purchased a new home in 2005 and equipped the kitchen with Whirlpool appliances. Every single appliance has broken at least once. The refrigerator ice-maker has been repaired once and replaced twice. Some of the control panel buttons on the dishwasher work some of the time. Other times we have to strike the panel to make them work. Weve had to replace the handle on the microwave door twice at nearly $50 a pop. And the motherboard on the dual-oven has been replaced once. I will NEVER purchase another Whirlpool appliance for as long as I live.

I purchased this washer 4.5 years ago. I have always been a Whirlpool customer. My parents had Whirlpool washer and dryer while I was growing up in the 60s. When I got married in 1976 I bought a Whirlpool washer, dryer and refrigerator. They lasted 19 years!!! Then I replaced all 3 in 1995. Again, lasted 16 years. I gave the washer and dryer to my sons when they moved out--its still working.So I thought I would reward myself with a new Whirlpool washer and dryer in August 2011. I didnt know about the pitfalls with the high efficiency washers. The dryer is great, but I HATE my washer! The lid lock is ridiculous, we should be given an option to override it. The sensing takes forever. The low water level leaves clothes unclean, and with detergent residue, causing the need for another rinse cycle. This saves no water if you have to run it twice. Not to mention how long it takes to do a load. Then it doesnt spin all the water out and you have to run a spin cycle. It aggravates me every time I do laundry. After being a Whirlpool customer for over 35 years, its time to move on. I just ordered a GE machine that is old school, no sensors, no lid lock, and I can control the level of water. Whirlpool doesnt make these simple machines anymore. Youre going to lose a lot of customers if you keep selling the trash. This is the worse washer I have ever had. My adult son went into a rage last night trying to use it, he forced the lid open and broke the lock, and of course it wont work at all without the lock. Good thing I ordered the GE washer the day before, it will be here in a few days. Cant wait to bash the Whirlpool with a sledge hammer, it will give us great satisfaction! Are you listening Whirlpool? Your designers need to go back to the drawing board. I realize this is not just a Whirlpool problem. Ive seen complaints about kenmore and every other manufacturer that makes these stupid low water sensing machines with lock lids. If consumers are too stupid to keep their kids out of the washing machine, maybe they should have their kids taken away.

I purchased a Whirlpool High Efficiency washer and dryer (Model WED4900XWO) from Lowes in March 2013. This washer has performed miserably. I dread each day when I have to use it. The groaning sound is annoying. My husband and I try to leave the house when the washer is being used. We have tried all cycles and combinations of cleaning detergents to get clothes to come out clean. On a regular basis white clothes will come out with spots or discolored to the point the clothes have to be thrown in trash. This is the worst washing machine I have ever used. I will never buy another Whirlpool product.

I purchased this range in 2010 and needed to replace the control panel/switch membrane in 2011 and it was covered by the warranty. Then I purchased an extended warranty and needed to replace the same part again. Then I replaced it again in July 2016. This part cost $147 and you cannot operate the oven without it. There is something wrong with the range that is causing the failure and the cause of the failure should have been fixed when it was under warranty but now that it isnt under warranty, Whirlpool has refused to correct the problem or compensate me for the cost to replace the part.

We bought a Whirlpool dishwasher (Ser# F21102027MOD, Model# WDF730PAYB2) after reading some of the reports that it was just as good as a Bosch. Wrong! We bought this washer March 17. On May 17, the selector switch and sub control broke down. We had bought this item at the HH Gregg store here, and also purchased a 5-year warranty which they said we cannot use because the dishwasher is only 2 months old. Is there a lemon law? And what makes this worse is that we called Whirlpool on May 18th. They could not get anyone out here until May 25th to look at it. As of this time, they still could not fix it because the two parts had to be ordered. Today is June 1st and the part is still not in? Makes me think, does this part always go down because its on back order? So you are fully warned, do not purchase a Whirlpool. If I can get some extra money, I am throwing it out and buy a Bosch because I dont think it will ever be fixed.

Purchased this washer 5 months ago. Have had service 3 times as dark clothes come out with white residue. I have done everything possible to correct the problem. They recommended from cleaning the machine, using less detergent, minimizing the load, using extra rinse, deep water and still the clothes come out with the residue. And it takes way too long to wash a batch of clothes. This is a known problem with this model. Repair company recommended a replacement and Whirlpool insists that it is a usage problem. One thing they said Could be water is too cold, I live in Florida there is no cold water! Whirlpool refuses to replace it. DONT BUY IT!!!

Purchased a 40 gallon gas water heater from Lowes. Installation was a nightmare trying to get the 3/4 pipe nipple fittings to seal. Once getting the two nipples to seal using extra thick Teflon pipe wrap, found the tank was leaking also. The return with Lowes was painless. Got another Whirlpool to replace, but angry about having to do the job twice. Wish I viewed this site first. Never would have purchased Whirlpool.

I bought this appliance 9 months ago and it has broke 4 times now for the exact same reason. I have set aside 6 separate 4 hour windows for Diamond Factory service to come repair it. All four times, it has been repaired improperly or diagnosed as “nothing wrong with it”. My refrigerator constantly runs, eventually forms an ice wall of back of freezer, and then eventually ice gets so thick to where it stops regulating temperature. All four times, I have had to throw away all my food, defrost the fridge on my brand new hardword floors, and take off work so I can be home for these 4 hour window “service repairs”. They refuse to replace the appliance. UNBELIEVABLE. Never purchasing from Whirlpool or Home Depot in Sunset Hills again.

Our 4 year old Cabrio top loading washer failed. Apparently there is an engineering design issue with the pump and tub assembly causing the machine to not complete its spin cycle. These items will typically fail between two to four years of operation. We paid $1,000 for what we thought was a high end machine from Whirlpool. After having a local repair company diagnose the issue, we were told by Whirlpool we must use their authorized service companies. After 6 weeks of waiting for service, parts and several trips to the laundromat, we had the repairs completed by Whirlpools authorized service provider. Within one week, our machine failed again, called Whirlpool and they said will not help us. DO NOT BUY WHIRLPOOL PRODUCTS!!!

I was doing a routine refrigerator cleaning and the glass I was cleaning absolutely shattered all over my kitchen. Shards of glass are everywhere including my disposal. I called Whirlpool and talked to a customer service rep. Of course, this is not under warranty. So I asked to speak with a supervisor. All I could get from her is Sorry, youre disappointed. We can replace that part for $87.71. It has taken me over two hours to clean up all the glass. I wouldnt be upset if I had mishandled the glass, but it broke when I was drying it with a towel! I’m wondering if anyone elses glass shattered in the same fashion.

I work on Whirlpool refrigerators for a living every single day of my agonizing, miserable, lousy life. Ive never seen such a mass of dysfunctional, defective rejects as I have with the new Whirlpool side-by-side refrigerators. The ice maker never works because the water line always freezes in the door. The food in your refrigerator side will either spoil or freeze because the damper door will stick open or freeze shut. The water filter housing will start leaking before you change the filter for the first time because of the inferior quality of the plastic its made from. And of course my all time favorite the compressor will always go out under the first 5 years (Thats why Whirlpool changed the warranty from 5 years to 1 on the sealed system). Ive never been a big extended warranty believer. But, like old saying goes, They just dont make them like they use to. Definitely applies to Whirlpool refrigerators.

I purchased a Whirlpool Washing Machine in November, 2015 and today, I had a repair person out who said the bearing had ruptured and the washing machine cannot be repaired - 2 1/2 years later. Contacted Whirlpool Customer Service who would do nothing other than try to explain to me that I should have purchased an extended warranty as they could not stand behind the machine past the one year. Would not even offer sending a tech out on their dime to confirm what my repairman had said that this is a failed production process of these machines - it was nothing that I had done caused this issue. But yet they wanted to sell me another machine. It will be a cold day before I purchase another Whirlpool product.I was shocked at the lack of customer service to assist with a situation that both the location I purchased it from and my own repair tech said that they are seeing so often with these machines. I would never purchase another item from Whirlpool again nor would I recommend any of their items. I will go to great lengths to give others the background on how Whirlpool will not stand behind their products, lack of customer service to resolve a situation or can work outside of what is given to them to correct a situation - this is not OK!