I love my stove and all of its features. My stove is easy to clean and I Love the self cleaning oven. I have a flat top so that helps when it comes to cleaning, not to mention it makes cooking a breeze. I love all the push buttons and how smart my stove is. I highly recommend my Whirlpool to anyone looking for a great appliance.

Purchased our hot water heater in August of 2011. About 3 days ago, it just stopped working. Surely it should last longer than this, right? Nope apparently I was taken! We called the manufacturer and described the issue. They said it was the thermopile. They could send us another out in a few days but we didnt want to wait so we paid $50 for a new one we were able to locate at a hardware store. Nobody sells these! We replaced the thermopile but no results... Pilot will not stay lit. Called Whirlpool back and they said to hit the reset button which we did. Called a technician (several) which wouldnt touch the heater. Said nobody works on these because they are riddled with issues. I pleaded with him to test it which he did. He said the control box is out! He said to cut our losses and buy a new one! I am so very upset! I cant afford another one! We called Whirlpool back again to see what they would say this time - they are sending us another control box! After reading all of the complaints and being without hot water, I am not hopeful of a good result! I plan on replacing the control box that they send and then saving for a new heater! I want my money back which Ive heard just wont happen! I have also had nothing but issues with my gas stove made by Whirlpool ever since it was only 6 months old. STAY AWAY FROM WHIRLPOOL PRODUCTS!! Run!!!

Bought Whirlpool refrigerator (Model # WRF560SEHZ00) December 2018. After 2.5 years, the door hinge failed and could not be replaced. $1,000 for new door. Dont buy! Too bad there wasnt a 0 option for the rating.

Regarding a Whirlpool Refrigerator (model ET8CHMXKQ04) purchased in 05. I dont remember exactly when the problem began but the freezer starts its defrost cycle, water drips down through the refrigerator compartment (soaking all paper/cardboard covered products), collects under the crisper trays and eventually spills out onto the floor. Its a river of water that requires a towel to collect.I believe whats missing is some sort of collection funnel and tube that catches this dripping water and delivers it to the evaporation tray behind the base cover plate under the refrigerator. Obviously, Whirlpool has no quality control nor does it do any field tests to ensure their products are designed and operate properly.

We purchased our first Whirlpool product, a washer, model WTW4800XQ 2 years ago. Started having problems with the clothes dripping wet after the wash cycle. Turns out the 2 year old washer needs a shift actuator and a wire harness that will cost close to $400 and take a week to obtain! I have had Kenmore appliances for the past 35 years. Ive never been disappointed it their performance or longevity. Each appliance lasting 15+ years and in the case of my fridge, it lasted 30 years! I am very disappointed in Whirlpool and WILL NEVER purchase another whirlpool product.

I was searching online and stumbled across this site. Funny that there were so many complaints about the console on the ovens, considering that my issue was with the console on a dryer I purchased. I have only had the dryer a year, and it stopped working. There is nothing else wrong with it, no codes, no problems with the lights, or anything else. A technician came out and found that it was a small plastic and metal button piece that helps the press here: spot on the dryer panel to connect to the start button on the console. The little arm had broken and the switch no longer worked.Figured we would have to purchase a new button. NOPE, apparently we were told that we had to purchase a new console (over $200 dollars, close to $300 with shipping)???!!! We were also told that wear and tear can cause the issue. Wear and tear?? On a dryer thats maybe run once a week for about a year? Try again, I think I need my boots because it sounds like horse** to me. I think I will pass this information along to people I know that are technicians so that they can let people know not to purchase from this company because they obviously arent going to address the situation. I think I might also utilize social media to let people know so that they dont have to go through this much aggravation. I certainly dont know what we are going to do, since it took me a year to pay that dryer off, I cant afford another dryer at this time. So unfortunately with a new baby on the way, you wont get any sympathy from me if your company takes a character hit.

I purchased Whirlpool only front load compact washer in June 2015 and lasted only a year before the door lock broke and getting F6 error that means mother board to be replaced. Whirlpool warranty department (AIG) did not bother to do a complete repair and offer buy out at a 75% of my purchase price. My five year warranty premium cost was not refunded. I do not recommend this model be purchased by anyone. Whirlpool washes its hands on the quality and reliability of its product in US and that is a shame! A service life the unit should be at least 9 years with affordable maintenance cost.

I have Whirlpool gas range, model # WFG361LVS1. The igniter went out after only one and a half years of light use (4-5 times a week). I did not buy the extended warranty, so part is not covered. I only asked that they send me the part for free. I talked to a supervisor at Whirlpool (Dave). He said I should have bought the extended warranty. He said he could not help me. He was also very rude. I will never purchase another Whirlpool product.

Totally worst experience with Whirlpool fridge with 1 year of the purchase. It started having cooling issues. Also it was making noise. When contacted for its replacement the company did not agreed for the same saying would provide free service within warranty period however after that customer will have to pay. Quality of product (shelf life) is too bad in context with the company it belongs to.

My microwave is very reliable and has lasted a very long time. I have never had a problem other than the circular glass plate that broke. It took me a little time to get use to the timer on it which is a little different than other microwaves that I have used. Overall a good buy.

We purchased a Whirlpool French Door Refrigerator in December 2016. About 3 months later the back panel was frozen preventing it to cool. We unplugged it and called customer service. They sent out a repairman, but by then it had thawed out. He told me he couldnt fix what he couldnt see, but he didnt even check it out. Two months later it did the same thing. Then he said I must have left the door open. He made me look stupid. During that year he came out 4 times until he finally changed all parts. We kept telling customer service we wanted a new one. After going back and forth with them they finally are reimbursing us, but they charged us $300.00 because we didnt want another Whirlpool product... now we found out they have the worst ratings and we certainly had a very bad experience not to mention all the food I had to throw out because of it. They did not care at all. So please do not purchase any Whirlpool products. I would not recommend that product to anyone.

Four years ago, my wife and I also purchased a Whirlpool washer and dryer set, washer model no. WTW6600SB2. Within the first year we had to replace both pumps twice, user interface, and control board. (I think that’s what it was called). Of course, that was all covered under warranty. But I to had to wait a week for the part and then another week for the repairman to make it. The user interface and control board had to be replaced because moisture got into the control panel and caused corrosion on the circuit boards which caused them to short out. Then it wasn’t long after warranty ran out, the whole wash tub and drum just dropped to the floor with a full load in it. I don’t remember exactly what was the cause of it, but I do remember it cost me $580 to fix it. Then it wasnt more than two weeks later, the repairman had to come again and replace the control board again. There went another $600 for the parts, labor and service call because this time they had to come from 40 miles away and it’s a minimum fee of $89 just for them to drive up here and another $60 for diagnostics, and then the part and their time to install new board. I paid for this machine twice in the first year and a half. Then after all of that, it was finally working like it should and worked great for about 6 months, then came the UL,LD, and Lid Lock codes over and over unplug, plug in, unplug, plug in. That lasted for about a month, and then all of a sudden, it straightened out. And we only got the occasional UL code. Now in the last year, I have had to replace the drain pump twice and then the drum and motor dropped on the shaft allowing any loose change or other items if accidentally missed during pocket searches to fall into the outer wash tub and get sucked into the drain pump and causing a quarter to be shoot through the drain pump making a hole and caused my laundry room to flood. Well, I decided I wasn’t going to buy another part so I used a plastic repair kit to fix the hole and got it up and running. A week later, the washer won’t wash. It will fill and that’s it. So upon my own diagnostic, I came to the conclusion that it was the user interface that went out due to corrosion I found on it. So for another $120 I can fix it, but I’m not sticking another dime into the washer, nor will I ever buy another Whirlpool appliance. Once all of my Whirlpool appliances die, I will replace them one at a time with LG. I to contacted Whirlpool about my problems and all they did for me was send me an extended warranty offer for 50% off, really that’s it, that’s all I get is a big GFY after all the money I have stuck into this piece of scrap-metal. Well, never again will you have my business as long as I live. Whirlpool, you need to take your hoo-ya and do something about all of these complaints.

Buyer beware! I purchased a Whirlpool Cabrico topload and with my second wash, I realized I had a mess of a new washer. Ive called the call center on 3 separate occasions and I have spoken to other customers who have the sample complaint. The clothes are not washed clean. They have a residue left on them. My advice to all potential buyers, dont even consider buying a Whirlpool Cabrio washer. It is the worst purchase I ever made in an appliance. Im very unhappy with my washer.

Chris from Whirlpool contacted me the same day that I filed my complaint. He offered to replace our water heater at no charge. We will pick up our new water heater this weekend and install it. Hopefully, it is designed better than our current water heater.

The washer in this set is my biggest complaint. I have followed all instructions and tried different methods time and time again and the clothes never come out fully clean. I too experience all the other complaints on this site as well, stuff still left on clothes, dry spots, stains not removed after being pretreated etc. I did some research before buying this set and saw some good reviews, dont know who wrote them but obviously they were highly inaccurate. This is my biggest purchase regret ever, as this set cost about $2500, so disappointed.

What a piece of expensive junk! Do not buy it, does not clean clothes well, lid broke, lock broke, now it just wont start. Parts are super expensive. Next one I buy will be a basic washer, forget all the bells and whistles!!

After purchasing three gold series kitchen appliances in 2013 two months after purchase refrigerator failed. Whirlpool did not have a fix at the time. Told me I had to wait two months for a part to be engineered and then service to be scheduled which is not acceptable. They would not take back the refrigerator and give me a different model so I had to press Lowes to accept it back and they did give me a refund. I then had to purchase a different brand refrigerator which now I dont have a matching set in my kitchen.Then the dishwasher became part of class action lawsuit and now my gold series gas range is obviously damaged too. The control had the plastic panel is bubbling and it is split. Again after talking with Whirlpool customer service they refused to help with this at all claiming this is a cosmetic issue and it wouldve only been covered for 30 days from date of purchase. This gas range also has an aqua lift self-cleaning feature which does absolutely nothing. It does not clean the stove. You have to go into it and clean it the old-fashioned way with chemicals, gloves, mask and a scrub brush. These products are absolute junk and the customer support is non-existent. Do not buy Whirlpool products.

People should consider themselves lucky to get 2 yrs, 1yr, 6 mos out of these pieces of junk. Mine replaced an 8 year old Bradford White that was originally installed when the house was built. Funny thing, we had the exact same BW in our last house. Same problem after exactly 8 years - tank leaked. Anyway, this Whirlpool 40 gal gas was installed by a professional plumber ($200) and ran fine for 6 days before the pilot went out the 1st time. In the next 10 days it went out 9 more times until it wouldnt stay lit at all. I would light the pilot and it would be out in 5 min or less. I watched for the error code the last time - 2 flashes which indicated thermocouple low voltage. This is totally ridiculous. After research - which I should have done before I bought - it looks like a total bad design problem with associated customer service nightmares and much additional cost to the customer. AND EVERYONE WHO MAKES AND SELLS THESE THINGS KNOWS ABOUT IT. Attempting to fix this thing - even IF labor was included - looks like throwing good money after bad. When are these companies going to be held accountable for producing cheap poorly designed products and then let the consumer foot the cost of labor and/or replacement. You can say all you want about less government but this is just a small example of what you get when you have less government. Doing further research, it looks like NO manufacturer of gas water heaters can produce a reliable product now. So now, Im installing a Bradford White ELECTRIC water heater. Thats and extra $250 for the electrical service that needs to go in. AND additional for the actual install by a plumber. At least Lowes is not giving me a hard time about getting all my money back for the Whirlpool since its less than 30 days since the purchase. I guess I should consider myself lucky it malfunctioned almost immediately. Total out of pocket on the initial Whirlpool install: $560. Total out of pocket with reinstall of BW Electric: $1000. My time spent on this mess: priceless. At least we will have hot water, even though it will cost more per month in electricity to do it. Thanks Whirlpool - stay classy.

I purchased a Whirlpool Refrigerator Model GB2FHDXWB07 a little over 2 years ago. The first one did not work properly within 6 hours of being turned on. Every few minutes it sounded like the compressor was trying to kick on so it hummed then shut off. Best Buy wanted to fix it but after much arguing with them and Whirlpool they brought me a new refrigerator. Now, the same thing is happening. Best Buy has no record of me purchasing it and Whirlpool has no record of me registering the warranty, which would be outdated anyway (over 1 measly year). So, they offered me a Repair and one year warranty $329.95 which means Im now up to about $1500 for a basic refrigerator that has not even lasted 2 1/2 years.The other option to fix it is to pay a local company $90 for the trip and diagnosis plus parts and labor. That will be around $550 depending on how fast the technician works. I will never buy another Whirlpool anything. My washer and dryer also have had problems but I wont even go into that here. The one good thing is the poor girl who took my call was very nice and acted as if this is a regular occurrence. Good luck if you buy a Whirlpool. They are garbage.

It doesn’t drain and ties clothes in knots. Spots appear on clothes after washing completes. Clothes never get clean and always have an odor. This is the worst washing machine on the market.

Overall the stove works well but it is horrible to clean. You have to use a lot of muscle to get the spills up from around the burners. It is hard to get around the burners to get all the spots off. The gas burners work well & cook evenly.

I have been buying Whirlpool appliances most of my married life. Our most recent washing purchase is the worst machine I ever owned. I have ruined more clothes, rugs, sheets and towels, etc. than I ever have in my 45 years of doing my own laundry. In fact, I do not EVER remember a washing machine destroying any of my articles. I just pulled 2 almost new rugs out of the washer only to find they have been destroyed! I am pretty sure it is the extremely fast spin cycle that is destroying my items. I know it cant be the agitator because it doesnt move fast enough to even clean the clothes. And the stupid load sensor is absolutely worthless! It does not dispense enough water to even cover the clothes let alone clean them. Go back to the old machines that did their job without destroying anything and actually cleaned the clothes with an amount of water that I chose. I ABSOLUTELY HATE this machine.

I bought a new whirlpool washer 12/15. In May 2016 it stopped spinning fast, clothes are coming out wet, still waiting for it to be repaired. Waited 3 weeks for a part, repairman came out today, it did not fix the problem. Now it doesnt work at all. Service tech said wait another week for more information. Called whirlpool. They offered me a $50 gift card to cover the laundromat. I paid $1200 for this washer. whirlpool doesnt care. I want a replacement. They said the warranty covers repair only, but they cant fix it.

My 3 year old water heater failed and the service line would send us the part but the install was my responsibility. Shipping was free but would take 3-5 BUSINESS days. Whole has a week to wait with no hot water, $35 for expedited shipping (which took 2 days), $175 for the plumber (authorized by Lowes (1star also) for installs). 2 days later the unit is cold again... Plumber comes back, plays with wiring and gets it fired up again. Says if there is a problem again to refer the techs to the plumbers office for new tank. Well now Whirlpool says they will only take the word of their own plumber AUTHORIZED HEATING 24 hours wait for a service call. You will be the 1st job Wednesday morning. Wednesday 930 call from AH we are backed up. Hope to be there between 1 and 4 pm. How did you get backed up if I was 1st job? Never again will I buy Whirlpool and nothing from Lowes as well. Still no hot water day 3 second time in 2 months.

Very unhappy with this fridge. The ice maker is finicky and the side shelves keep breaking. The cake drawer cover broke almost immediately. We replaced it and it broke again so we just took it off.

I purchased a Whirlpool microwave oven from American Furniture/TV in Fenton, Missouri on 11-13-2010. It had a Whirlpool 1 year warranty and a Performance Guarantee for five years. I noticed recently that the plastic on the door had hairline cracks near the handle and now is beginning to crack around the glass on the front door. I called American when I noticed the cracks by the handle and was told that it was cosmetic and not covered. Now the cracks around the glass may be a bigger problem if they let fumes out from the microwave. I am waiting for a second answer from American. I feel like the problem is with the plastic itself.

We bought a Whirlpool Refrigerator - Model ES5FHAXS in 2006. Right off the bat, a line in the back of the refrigerator was leaking. We paid for the repair. Next after just one year, the refrigerator would be warm and the freezer part ran super cold. The settings did not work. After much haggling with Whirlpool, they paid for someone to come out and repair it. It worked for several weeks then the same problem came back again. We argued with Whirlpool again and someone from AES or AAA came out. The problem was fixed but once again came back again after a couple months. We called Whirlpool again. This time was much haggling and arguing but got them to come out a third time. Once again, the problem was fixed but came back again after several months. The repair company stated that if they found it was something other than what they fixed, we would be charged. I said either it was not fixed right or the refrigerator is a total lemon. I said you will probably just say it is something else to cover your costs. Whirlpool acted like they did enough, even though 3 repairs could not get it right. If we paid or each repair ourselves, it would have been nearly the cost of the refrigerator and it still would not have worked. We bought a refrigerator back in 1992 and never had any problems after 16 years when we moved. The refrigerator was not cheap but could not do what refrigerators are supposed to do - keep things cold all the time. What a disappointment.

We have a Whirlpool with freezer on top, nothing fancy in the apartment we rent. Twice the lines have clogged up with ice, causing the water to pool in the bottom of the fridge and then leak onto the floor. The maintenance man said this was a common problem in the complex with the refrigerators. Tonight, I heard noise coming out of the fridge. It was so loud it scared the cat. I went to check on it and a juice bottle had exploded in the fridge. It cannot keep an appropriate temperature. Things up front are barely cool and things at the back freeze. We are moving and unfortunately, the house we are buying has Whirlpool as well. When it comes time to replacing the refrigerator, it will not be a Whirlpool!

We purchased 3 Whirlpool Gold appliances, fridge, range and over-the-range microwave in 4/2011. Since that time, the fridge needed repair, the microwave door had to be replaced and the range had to be repaired. Now the heating element on the microwave went and Whirlpool will not fix the problem. We purchased the extended warranty through Whirlpool and they are saying it is not worth fixing. We paid $470.00 plus tax and install and now all they are giving us is $348.00. Since we have had repeated problems with these appliances, why not just fix the problem or replace the microwave??? What Whirlpool customer service told me was that would be options for us if we did not purchase their extended warranty. Tell me, is that fair? The cost to repair the microwave was $388.00 and they are giving us $348.00 - do you not think for the $40.00 difference, it would be worth to spend it to keep us happy. We will never purchase another Whirlpool product again and will tell everyone we know not to buy their products.

This Whirlpool fits in a 1962 brick split level kitchen perfectly. It is both beautiful and runs as hoped. It has a bottom freezer, allowing the top portion to hold a full Thanksgiving and Christmas turkey platter. I love this Whirlpool. It is also made in America!

I am very happy with this dishwasher. It is not a high end, rather middle of the road, but is very quiet, does a great job of cleaning my dishes and pots and pans.

The refrigerator is not repairable according to 2 different servicemen. The refrigerator just stopped making ice and not cooling all of a sudden. The problem seems to be inside the panel between the refrigerator and freezer portion. Its a side by side. First time I ever bought Whirlpool Appliances. To make things worse my Whirlpool oven does not work either. Even worse, the Microwave pretty much popped and never worked again. A Whirlpool microwave. The only thing still working is the Whirlpool dishwasher but I wonder for how long. Ive talked to Whirlpool and they said I only had a 1 yr warranty and they could not help. I am writing to their corporate office to complain. I have an old Maytag refrigerator that still works and puts out ice in my garage. I went to look at Maytag appliances and just found out that in 2006 Whirlpool took over Maytag. So I will not ever, ever buy another Whirlpool or Maytag again.

I purchased this washer about a year ago and have been dissatisfied with its performance since Day One. It takes a long time to run a cycle and has not saved me any water or electricity. I always have to add a second rinse because it doesnt get the soap out (using the recommended detergent) with the regular cycles. Sometimes it doesnt get my clothes clean.Today it tore huge holes in the front and back of one of my very favorite T-shirts, which was a very meaningful gift from a very good friend. This was due to its tangling the clothes even more tightly than it usually does; the tangling process was what tore the material. I always take pains to load the machine in the manner instructed, to put the clothes in loose balls around the outside of the drum, but nevertheless it can take me several minutes to untangle my laundry before I put it in the dryer (also a Whirlpool -- just waiting to see how it disappoints). If I had read the reviews here before I selected my new machines, I would never have purchased the Whirlpool washer or dryer. I certainly never will purchase Whirlpool machines again.

I purchased a Duet Front Loading Washer (model WFW9750) in May 2010. In September 2011, the noise level had become intolerable. I called a local service company. They advised me that the main bearing was bad. It would cost more to repair than what it was worth. I contacted Whirlpool. They could not do anything unless the machine was inspected by one of their authorized service companies, which they scheduled. Two weeks later, A&E Factory Service arrived and confirmed that the bearing is bad and the cost to repair will be $1,542.06. Whirlpool customer service transferred me all over the country to tell me that the machine was out of warranty and there was nothing they could do.

I live in Florida and in December 2012, purchased a Whirlpool upright freezer from my local Badcocks. About two months after the purchase it started making this weird loud sound. I contacted Whirlpool and they sent a local appliance company technician out to check it. The technician ripped my brand new Linoleum floor when pulling out the freezer. The result was, in his opinion, nothing was wrong with it, that the loud sound was normal. As it continued, another tech came out and his opinion was it needed a new compressor. So, it was replaced and lasted about a month. I was getting something out for dinner and noticed everything in my freezer was unthawed... all that money wasted a freezer full of food gone. So, Whirlpool once again sent the same appliance company out but a different technician. This one said it that he needed to order parts which he did, a different tech came out to install the parts and told us he didnt know what they were for and our freezer didnt need the parts the previous tech ordered. So this tech put dye in the lines and left. The dye leaked out from under my freezer all over the floor which is now stained because of the dye that leaked. This is the brand new floor they had already ripped during the first service call. So, now not only is my floor ripped but stained as well.Once again, about a month later, I find my freezer full of meat unthawed a third time. Once again I called and find out they have dropped the contract with the company that came out the first two times. So they refer me to another local appliance repair, and this new tech says that it needs a new compressor. This will be the second new one in less than 6 months. They order that part and repair the freezer; this fix lasted for about three months this time. On my fourth call to Whirlpool, I expressed my frustration with losing my food and the hassle of an inferior product purchased brand new under warranty. I definitely was not satisfied with the service and the customer service representative could not find my warranty record. He was also very rude and when he finally found my record, he told me I was no longer under Whirlpool warranty. This was wrong as I have my paperwork showing date of purchase AND the four-year extended warranty we purchased as well. I asked him what they would do for me since their inferior appliance and incompetent repair technicians cost me hundreds of dollars of ruined meat and other frozen food. He said they would do nothing except have another repair tech come out. Until the freezer is determined to be unrepairable that is all they can do.So I scheduled the tech to come out the fourth time and he found that some untrained tech had put oil in the line and the lines and compressor has to be replaced and flushed. I have already not had a freezer for a week waiting for tech to come out and now the parts are put on back order for another three weeks. The fourth repair tech called Whirlpool from my home, while I was standing there, and told them that it basically is beyond repair because of the price of parts and labor. He told Whirlpool it would be cheaper to replace the freezer but Whirlpool told the tech to replace the lines and compressor and flush everything out. So three weeks later, he comes back out on 10/13/2013 to make the repairs. I bought this freezer in December 2012 for $1200 and have been dealing with issues on and off since Feb. 2013 and now its 11/29/13 and once again my freezer has stopped working. I have lost all my food because Whirlpool sold me a defective appliance and would not make it right. I have asked them to replace it and they wouldnt. My husband and I have just purchased our second house and we were very excited about the remodel coming up in the kitchen. We were going to purchase stainless steel Whirlpool appliances, but after this company has treated me so badly, I will not buy anything with the Whirlpool name for our stove, dishwasher, microwave and refrigerator.We probably would have spent about $3500 on appliances, but we will purchase a different brand and give our $3500 to a company that will treat me better as a customer .I used to have trust in this company because it is well known for quality products, but I dont trust them anymore. I will advise any of my loved ones and friends not to purchase any Whirlpool appliance because of the inferior quality and lack of interest in making this situation right. I tried for almost a year and gave them 5 opportunities to do the right thing and now Im done. They dont care about the customer and that is a shame because they have lost a valued customer. As of now I have another tech coming Tuesday b/c my freezer is sitting not running again. Model #EV201NZTQ02.

I got a Whirlpool washer front loader model number wfw9151yw. Every time I wash sheets, they go into a ball. I called Whirlpool. They sent out a service guy. He said do not wash sheets in a front loader. I called the store. They said call Whirlpool again. Then the second service guy moved the legs down about 1 in. The machine still not right. I feel Whirlpool should replace the machine or give me my money back.

Brought a five burner Whirlpool range on June 9, 2018. On Christmas Eve the door fell off and I had a house of 20 guest. Couldn’t cook at all, and cook Christmas either. Call them immediately on December 26, 2018. They set up a schedule for the following week on Monday. The man showed up. Could not believe how this could happen is that he had ordered me a whole new. Dealer said it will be back on Thursday or Friday that week. The serviceman still hasn’t called and it’s Friday. Called the serviceman no answer so here I go another week or two with no oven. The oven door fell when I opened it to take food out and fell in my legs. Have a nice black and blue. Maybe I should think of suing them instead of getting it fixed.

The refrigerator itself is noisy but thats not the problem. Most of my low ratings are because of the ice maker. Instead of being in the freezer it is up in the refrigerators area. It jams a lot, makes a lot of noise, had to replace the ice maker assy inside it already as it quit. Then the defrost water drain plugged and had to be cleaned out. Too many problems for such a new refrigerator. The refrig. itself works fine but get one with ice maker in the freezer.

I purchased this machine in April and already, the right leg is rusted and the under seam of machine is rusted. I have throw rug under it and where the leg is, there is rust on the rug. I called service from Whirlpool and 2 servicemen came out. The first one told me I was loading it wrong and the water was splashing over the inside tub to rust the leg and I asked, So why is the seam under the machine rusted? No answer. The second one came out and told me he could not find anything wrong with the machine and doesnt know why it is rusting, but he never gave me a paper to sign off on. He also said that maybe it was rusted when it was delivered. Not!!! Then I call P.C. Richard in Watchung, NJ where I bought the machine at and told them about the problem. They sent a serviceman out and he said that the bleach condensation is causing the rust, its known fact that this machine has this problem. He said that the water does not run through the dispenser but there is a model that does. I want a credit on this machine and get the upgraded one. It states on the machine that I can use bleach but it doesnt say it will cause rusting. I want you to tell me how a 9-month-old machine is rusted on one leg and the seam underneath is also rusted!!!! I had a machine for 10 years and it wasnt rusted. I am very unhappy with this product and with the customer service of Whirlpool. This is my first Whirlpool washer and I would not recommend this washer to anyone. I paid $600.00 for this washer and it should not be rusting.

Bought all Whirlpool appliances for my home and the dishwasher doesnt work right and all that they can tell me is its not even 7 months old. They dont have any repair technician around where I live so Im on my own to get it fixed. So much for getting your moneys worth.

As a consumer, Im very disappointed in this Whirlpool Cabrio Platinum washer. It does NOT clean your clothes. Many times Im washing my clothes twice, only loading a 1/3 of a load of laundry in it because of this problem. No matter what you do, it just doesnt clean your clothes. Has anyone considered putting a law-suit against the company. They will NOT stand behind this issue, NOR replace your washer with something that works. Maybe that is what it will take. DO NOT ever ever ever ever ever ever buy this piece of crap washing machine. You will waste your money, your time, your extra detergent it takes to wash your clothes AND the cost of the machine too! The MILDEW SMELL is horrible and no matter what you do you CANT GET IT OUT! Ive tried it all. Im just angry because I had to save money to purchase this set and it is a piece of crap! The customer service is just a runaround, they wont help you! They will just give excuse after excuse. They need to replace EVERY ONE of our washers with something that works!!! For the cost of this machine alone, they should do something to resolve this issue!

This washing machine is terrible. It barely cleans my clothes and frequently gets off balance. I am now on my second repair call in less than 3 years. (I bought the unit in the summer of 2013. It is now the winter of 2016.) The last repair guy tried to blame me, suggesting that I was filling it too much and with heavy materials. Last night, I washed 5 or 6 doggie towels. Not even large, bath sized towels. And the whole thing just stopped. It wont spin and wont unlock. What a piece of crap.

I purchase the front load, energy efficient brands, low water usage. Love Whirlpool; never had a problem with their appliances. Front load, low water usage, clothes dont sit and spin in dirty water. Dryer has multiple cycles. Perfect for the whole family. My last Whirlpool set last me over ten years, wanted that same quality level in my new purchase. I wanted a quality machine. I was very familiar with the Whirlpool brand and knew that was going to be my first choice in a brand. These were full size. The tub is large enough to hold a king size comforter and wash it without destroying it. The dryer has a separate attachment for pillows and shoes (sneaker plus) and was competitively priced at the time of purchase.

Updated on 07/30/2021: On 5/4/21 a tree took out a neutral on the power line to my home and after inspection by my electrician, he said my Whirlpool refrigerator was done. Not even 1 year old. When attempting to get Whirlpool to replace the refrigerator, they said they have to try and repair it before considering any other options. As they do not cover damage by acts of God their warranty would not cover replacement. Mind you I paid around $1500 for my refrigerator and it was not even 1 year old. 5/17/21 (2 weeks from when the refrig got fried and I had to get and I had to purchase a used refrig until then) serviceman said he had to order parts. 6/1/21 - Motor-Cond $158.20, Fan Blade $13.97, CNTRL Elec $60 CORE [PI] $497.45 and Evap Fan Motor $183.91. Did not fix the problem and had to order more parts. 6/8/21 - Evap Fan Motor $183.91 (first one did not work), Rail $34.76. Service tech said to wait a bit before moving the frig back to make sure it was cooling properly. Finally moved it back on 7/7/21 and hooked up the water line. Few days later noticed water leaking from the top of the freezer door and a lot of water on my floor. Heard a funny sound and found water spurting from the top 2 corners of the freezer door. Called whirlpool warranty and was told they would contact me. Next I get a notice that I have a service appointment in August. Was able to get it moved with a follow up appointment with a part that was broken during the last repair for 7/28/21.7/28/21 - Fill tube heater for icemaker was open and frozen - now tech ordered Rail $34.76, Freezer Door $1,525.84 and Valve $124.23. 6-8 weeks custom order. So we also have to added 5 service calls to the cost - Approx. $500++. Total Replacement Parts = $2,758.81 with a final total cost to repair of $3258.81+ vs just replacing or reimbursing me for the appliance of approximately $1800. Someone needs to review their model because not only am I without a working refrig for 4-5 months, but the repairs cost them $1500 more and now they have a customer who will not longer invest in Whirlpool appliances because of bad business practices and inconvenience.Original: I purchased a Whirlpool side by side refrigerator in July 2020. Earlier this month I had a tree pull down a power line and disconnect the neutral, allowing a full surge of power to go through my house. It fried the exhaust hood, literally melting the components. It also fried my refrigerator. The electrician who reconnected my home signed an affidavit that the refrigerator was permanently damaged due to the surge. When contacting Whirlpool to file a claim, I was on hold over an hour before getting a person. This happens every time you attempt to contact them, so patience is required. I was not able to get a service call on my refrigerator for 2 weeks (5/17/21) so that left me without a refrigerator. The service company showed up early and I had no choice but to leave my job or reschedule another 2 weeks out. The tech said he could only repair and made an attempt to contact Whirlpool to get the unit replaced and he was on hold for over 30 minutes. They declined and said because it was an act of God they could not replace it. I was already having issues with the unit before the surge of a constant defrost that was causing food to spoil due to melting then refreezing causing freezer burn. I also lost over $500 worth of food. They dont cover. It also caused the icemaker to constantly freeze up. Now it will take at least another 2 weeks for the replacement part to fix and a refrigerator is not something you can go without that long. I had a concern this would happen. When speaking with customer I service, they said they just needed the tech to confirm it was damaged to replace it. At this point he said he does not know if the piece (on 2 weeks backorder) will fix it. They can only tell after the fact. He said Whirlpool only fixes and does not replace, which is not what Home Depot informed me when inquiring into the warranty with Whirlpool. They said Power Surges are covered. So with this in mind, I would seriously consider buying from Whirlpool. Things break, situations happen and no one should have to go without a refrigerator for over a month because they may be able to fix it. Then there is the concern if something is melted/destroyed inside, if it could cause a fire in the future. Will never buy another Whirlpool appliance again. They cant stand behind their products, the products are worthless. And yes, I am very upset. Again - just had Whirlpool tell me its not covered as it is an act of God! ARGH -

I always appreciated Whirlpool’s quality, but this brand new stove in my brand new home is a disappointment. The top, back (control panel) gets extremely hot when the oven is in use. The burners are not as easy to regulate, and the broiler (which is under the stove, a negative for me) didn’t come with a broiler pan. That was an additional cost. I had service out in the first 60 days because the oven wasn’t heating properly.

After 5 service calls for cooling problem, under extended warranty, refrigerator was replaced. Had purchased 3 water filters directly from Whirlpool before problem. Could not use these filters in replacement model. In spite of that fact & filters in unopened factory package, Whirlpool would not refund the $100 purchase price because I DID NOT RETURN THEM WITHIN 90 DAYS OF PURCHASE, even though I wrote to their US president. Really unfair treatment & they could care less that I had to replace a defective product.

I purchased it in 2011 for $1100 Canadian. Smooth glass top and true convection. The controls were easy to use, and understand. What bothered me was that it stopped working just after the warranty ran out. I did my research, and found that the newer ranges that have the controls on top at the back have issues with the motherboard overheating, and causing this problem. I did speak to Whirlpool customer service, and managed to convince them to supply the replacement part at no cost. I paid my local dealer to install it. This repair lasted for just over 1 year. Same problem again.This time I could not convince Whirlpool to supply the part. FYI The part in question is the controller. Essentially a motherboard. All the controls are operated through this small computer. It is the only replacement part that costs over $100. Last I checked it was around $450 Canadian. The reason for the fault is overheating. According to the tech that fixed it the first time, it is the most common problem with this style of range. I find this concerning considering the only thing a range does is create heat!Keep in mind that you are virtually held over a barrel. There are only two companies that market their products under multiple names adding up to over 80% of the appliances on the market. They battle for that market by offering more bells and whistles, and less quality. The Range I replaced four years ago was 20 years old. I just replaced my Whirlpool 3 months ago. I went outside of the 80%, and bought a Samsung. Im rolling the dice, and went with induction top. My theory is it will produce less heat because it just heats the pot, not the stove top.Low quality drives me nuts. I want fewer bells and whistles, and more long lasting reliability. I should be able to go my lifetime and only buy two or three ranges. We really like the induction top. It works fast, and doesnt produce too much excess heat. Dual zone oven is a good idea. We werent looking for it, but there was a deal on. The dual zone induction range was only $50 more than the regular one beside it. Now my wife uses it all the time. She will have cookies in one zone, and a casserole for supper in the other. True convection is the other must have. It does a great job cooking everything evenly.

Owned it for approximately 15 years and has never had any problems with it all. I would highly recommend this product because it is affordable and easy to care for. It even comes with a filter for water. Great refrigerator.

We purchased this Whirlpool Cabrio washing machine from Sears about four, maybe five years ago and have complained repeatedly. We have had repairmen out numerous times. Of course, they have had to order parts. My clothes are not getting clean and they now have an odor to them. The machine is getting noisier and noisier and it is rocking like crazy (I had to put plyboard underneath to protect the floor) during the rinse cycle. The water sprays out erratically and sprays even slower for cold water, then warm water, which was weird! Thankfully, I still have it under warranty (I got the extended warranty). I am now getting ready to call them again. I will never buy this brand again.

I have always chosen Whirlpool or a Whirlpool product such as Kenmore or KitchenAid. Preferably with an actual agitator in the tub. As a very capable handyman, repairs have been easy and relatively reasonable in cost. My units are 15 years old and going strong.

I have bought and used other dishwashers (different brands). They lacked quality, quiet operation and efficiently and effectively cleaning dishes, pots and silverware! My Whirlpool dishwasher is far better than all of them. It cleans and makes my dishes sparkle. I would not buy anything but Whirlpool in the future.

Whirlpool washer Model WGD4815EW1. Bought this washer just about 4 months ago and right away I hated it but was told by people that all the machines had gone to the lid lock and that the government had mandated the energy saving devices on the machines so the machine will only put just a little water in the machine. I have been VERY VERY unhappy with this machine. My husband figured out a way to bypass the lid lock mechanism. Then after washing clothes many times I found out in order to get my clothes clean I had to just set the dial to Bulky every time OR I had to wash the clothes 2 times to get clean if I didnt. Once we bypassed the lid lock and then I figured out where to put the knob so the clothes would come clean I was fine until last week the machine just would NOT wash or do anything... it filled with water and just sat there until my husband got the water out. I located a Speed Queen from an appliance store and I am much happier. It does not have the CRAZY lid lock on it. I realize that some children are apt to mess with the washers. But I dont have children anymore and when I did I had a laundry room with a lock up high on the door so they could not play in the laundry room. I dont understand why this so called mandate could not have been done in a way as to allow those with kids to have the option on the machine with a built in code device to set the machine so the lid will lock and those of us without children in the house to opt out of the code to set the lid lock. NO REASON why we cant have a CHOICE. As far as I see it is a way for the government to try control more where they need to keep out. The cars have been designed with safety locks for children to keep them safe, but it is up to you to choose to use them. Same principle! Now for the mechanism to make it so the machine will only put so much water in the machine to wash. Youre NOT SAVING any ENERGY or WATER if you have to wash the loads twice!! This whole mandated business with the newer washer machines is a huge JOKE on everyone. I will be searching out used machines and having them rebuilt because I dont EVER plan on buying another one of these newer machines. If enough people stop buying them the manufacturing companies can raise some cane with the government to get the mandate lifted. NO I will not buy another Whirlpool washer. I encourage some of you out there who LOVE a challenge to figure a way to change the stupid motherboards on the newer machines and create a great business for yourself because if someone else can create it you can recreate it.

Contacted Whirlpool - unit (Cabrio washer 7600xt) is out of 12-mo warranty. Spoke with manager, Tracy **. She said they would not help - out of warranty. Called local parts/service center - ea. hinge is $42 plus shipping and labor to install. Obviously this is a defective design. The lid is too heavy. I was having a difficult time deciding to spend 150-200 dollars every 2-3 years for hinges on a $700 washer and then I read all the other complaints about Whirlpool washers. I will sell it for scrap and buy a better brand.

We bought a new Whirlpool counter depth side by side stainless steel refrigerator in January 2012. We have had 7 service calls because things were freezing on the top shelf. They installed a new part and it still froze. They told us to do dumb stuff at Whirlpool like turn the temp up, dont use the top shelf, etc. The money they want for these appliances and you should put a band aid on it to make it function properly? Duh? The final fix was to duct tape the vents to allow less air flow. This appliance should have been recalled. I have since read reviews and it is an ongoing problem. Before buying, do your homework and make sure the other brands are not manufactured by Whirlpool. The Whirlpool hotline for problems is not that service friendly, they have an attitude. I need to replace two more appliances and they will not be Whirlpool. The repair service was great but they are independent companies, not Whirlpool. How do you fix a lemon? Consumers need to be aware of this. Whirlpool would rather spend money on repairs that did not work instead of replacing the appliance. If you want 7 or more repair visits and no results, buy Whirlpool.

The washing machine started leaking and making a noise like a freight train 6 months after purchasing it. We complained in February 2011, but the parts were not available until March 31, 2011. The same problem occurred in September 2011, and we are still waiting for the parts until October 18, 2011. In the mean time, I have been spending hundreds of dollars doing wash at the laundromat.

DO NOT purchase a WHIRLPOOL hot water heater!! The gas valve temperature sensors on these units are faulty. Our technician has replaced several of these defective sensors. Costs $250.00 to install - water tank is only a year old! WHIRLPOOL REFUSES TO ACKNOWLEDGE THIS PROBLEM!! We bought this particular unit because of the reputable name brand. They dont live up to expectations. Dont waste your money on a Whirlpool - youll be replacing it soon! Very disappointed in this company!

We bought a Whirlpool washer in 2010. It started making a loud noise on the rinse cycle in 2012. We called Whirlpool. They sent out a repairman from A and E Repair. Was told tub bearing shot, repair over $700.00. Contacted Whirlpool, was told machine out of warranty. After talking to them, they agreed to send parts if we paid labor. Machine lasted less than a year making the same sound again. A and E sent out same thing, bearing gone. Repair cost $997.17, charged us $136.74 service call after 2 minutes to shake the drum and saying same problem. Was told by Whirlpool, no warranty, tough luck.

Purchased new Whirlpool washer from builder - never worked. Serviced 4 times by Whirlpool - does not wash, does not sense, shakes like crazy. No resolution from Whirlpool - worst customer service experience.

Its a piece of junk. The only time it will finish a wash and spin dry is when it is empty. Otherwise, it stops and lists an unbalanced error code. I opened up the service panels and found no broken hangers or clothes. There’s no way to bypass the system. I have read of similar issues and of course, its just out of warranty. I assumed the warranty was like other brands but it’s much shorter. What to do? Purchase a washer with dials and not a brain; it will last years. Note that the models without a brain cost far less.

Tried for several days to schedule service call for my leaking whirlpool ref/freezer. Waiting on hold to speak to a rep... transferred to another dept. - on hold again listening to a recording advising me of the unusual high volume of calls to call back at a later time (should have been my clue of all the problems with their product). I had three different Whirlpool phone numbers given to me from the reps I spoke with. I would like a refund for my extended warranty. I have called an independent service company and will pay for the repair. I will not buy or recommend Whirlpool or their products.

My stainless steel french door refrigerators compressor quit working and needed replaced after 3 years and 10 months. I had to buy a replacement kit and it cost 400.00. The repairman cost 175.00. I tried to buy an extended warranty but they do not sell them. You get a 1 year warranty. The repairman told me you will be very lucky if you get 4 years out of the replacement. He said all of the new compressors are really junk. Remember when refrigerators used to last 30 to 40 years. Not anymore. It is a money racket. Do not buy anything Energy Star, it is all junk. I have gone through 5 washing machines in 18 years, and I live here by myself.

Our Samsung self cleaning oven burned out. The wires in the back were burnt and brittle and its a miracle our house did not burn down. While shopping we were told the new self cleaners were so much better, not the high heat, odor etc. This Whirlpool stove does not self clean, its a joke. I have scrubbed for hours on it. It does not get any kind of grease etc. off. You need to scrub and work hours. It may take a small spill off the bottom of the stove but thats it. There is no way to get all the grease splatters off the walls etc. I hate this stove and see there was a class action law suit on it. If I would have known then what I know how it would have gone back as soon as it arrived. I plan to go looking for another stove and it will not be a Whirlpool Aqualift self cleaning.

My Whirlpool washer broke down on July 06, 2014. I contacted the local supplier (Unicomer Trinidad) on July 07, 2014. Their technician came on July 10, 2014. He said that he will have to check and see if they have the part that is needed to repair the machine, they will contact me the next day. No one contacted me. I called on July 14, 2014. I was told that they do not have the part and it has to be order. It will take about 2 weeks for it to reach them, no one contacted me since. I contacted them (Unicomer Trinidad) on August 04, 2014. I was told that they do not have the part and it will take 2-3 weeks to reach them. I did filled out a form on the Whirlpool support site about 2 weeks ago but no one contacted me. I contacting Whirlpool US HQ by telephone, they gave me a number for Whirlpool Florida. I was told that they are responsible for my area but when I try calling the number, it was out of service. When I contacted back Whirlpool US HQ, I was told that they cannot help me check the website for the local representative which I could not find. This washing machine is 10 months old plus I took the extended warranty. It is a Duet WFW94HEXL2 washer.

This Whirlpool washing machine is incredibly annoying and slow in everything it does. First off when you press the START button it takes 2-3 minutes before it decides to do anything, like maybe add water (except click, click and more click). If you have pressed the start button and you want to stop it to add something... again you have to wait almost 2-3 minutes before the lock is released and you can open the door. I am at 2 hrs and 15 minutes as I write this on the LIGHT WASH cycle with extra rinse and its still going. I have never seen anything like it. Cant imagine how long a HEAVY CYCLE takes. Cannot even try to measure the time. I put the load in and go to work and hope its complete when Im done 8 hrs later.We had a Maytag for 15 years with no issues (other than a drain hose cracked and had to be replaced) and it was time for a new one with a move to a new place. The sales associate convinced us this was the best machine at the time... Well what a mistake that was. There are no complaints about the actual washing. Everything comes out clean but I suppose taking that long I cant imagine why it wouldnt. I certainly cant recommend a Whirlpool washer to a friend, because I dread the thought of doing laundry at this point.

I have had my Kitchenaid dishwasher since April 2010. I have the receipt as proof. I have recently had a professional out to replace a seal in the door, the gasket on the vent and the unit still leaks. The only places left are the metal body and door. I called to say I wanted the warranty honored. I was told one of their servicers had to verify. I agreed. Their servicer came out at the agreed time. He did not bother to protect my hardwood floors from his muddy shoes. He also absolutely wreaked of cigarette smoke. He proceeded to try and push me into paying for the same repairs I had done last week because he would not warranty the parts under warranty unless I paid him to replace parts a week old. I told him he was here to verify the leak not push me into more repair costs. At this point, he began slamming his tool box together and exclaimed Thanks for wasting my time. I called the Kitchenaid warranty number in my pamphlet to see about the warranty. They refused without making me pay for their esteemed professional to do the same work, a real professional already did. The best I was given was 30% off a new appliance. When they wont honor their 20 yr warranty on the one I have, telling me their unprofessional is so much better than the one I used who did protect my floors and treated me with respect, I have no faith left in this company or its servicers. I will be filing a complaint with the BBB. I plan to be very vocal with this companys refusal to stand behind their products and explicit support of disrespectful servicemen.

We have all kitchen appliances from Whirlpool, but it is not what we choose, that was builders choice. We, two people, are living in his apartment for almost five years, and first problem was with oven - the window in the door it is leaking somewhere, then microwave - the all front door plastic is cracking (we using microwave maybe twice a week) and is it placed under the oven. Now we have problems with fridge - the plastic inside the fringe is cracking. We called Whirlpool customer support and Whirlpool do not even want to hear it about the problems - they just want that same authorized technician will came to your apartment to inspect these problems for $95, it is not even important whose fault it is. This company, Whirlpool really DO NOT CARE about the products, which they produce - as long it is sells... Now we know, we made smart decision - do not accept the washer and dryer (we get it from Bosh - it makes me happy). Now we just wait till all Whirlpools appliances will stop working and never ever look back to Whirlpool.

This dishwasher is the most quietest dishwasher we have ever bought. Cleans even the worst messes with ease. We love all the different modes for cleaning levels. Plus in addition the ability to adjust the racks for large capacity dishes. As well the adjustment to wash fine china and crystal. We just love it!

I purchased model FG1F4040SEPV Whirlpool water heater from Lowes about 5 years ago and have had to literally replace the thermocouple each year. At least 3 of these years we have had to pay someone to fix this for us until we learned to do it on our own. Im very surprised Whirlpool didnt recall these water heaters and make it right for their consumers. What this did for us was confirm that we will never purchase another Whirlpool item ever again. We are switching over to Kenmore!

In July 2018 I purchased a coin operated commercial front load 27 in washer and dryer. It was placed in and used in a six unit apartment building occupied by 8 long term adults. Prior washers and dryers had been operational for years with minor repairs at times. In June of 2019 the interior cement center balance on the top of the washer drum broke with resulting damage to screws securing the center balance and potentially other unknown parts. This was reported to Whirlpool customer Care service and they referred me to one of their a repair services. The repair service in about early August repaired the washer.In late September 2019 the cement balance broke a second time and this was again reported to Whirlpool service who requested I notify their recommended repair service. On inspecting the washer the repair service stated the entire washer was required to be rebuilt. The labor for installation of would cost me $1,125 with Whirlpool providing the parts under their warranty. The $1,125 labor cost was just under what I paid for a new coin operated front load washer. I reported this to Whirlpool whose supervising staff, without any inspection of damaged washer as to determine whether the washer was fit for its purpose when sold as a commercial washer, rejected any replacement of the less one year old washer and insisted they would only pay for the parts and I would have to pay for the labor, particularly when the both the cost of the replacement parts and the labor would be substantially in excess of a new machine. Due to time and effort constraints the problem was resolved by simply dumping the defective washer and purchasing a new commercial front load washer from a more responsible company.

This is NOT a true review of the oven as I have not used it for baking yet. I just wanted to make a comment about my new oven which was installed this morning. I turned it on as instructed and heated at the high temperature to rid it of the odours. When it is turned completely off the cooling down process begins, which blows the hot air from the oven into the room, causing some annoyance from the hot air, as well as the noise. Not sure I am going to be so happy in summer. I am certain it is a wonderful product for baking results, but with this annoying feature, I am not feeling so happy about it.

I purchased a lot of Whirlpool appliances -- washer/dryer, dishwasher, microwave, and now a Whirlpool stainless steel refrigerator. This was approximately the end of 2014. Not long after I purchased the refrigerator, the front started with small rust stains. I notified Whirlpool and all they said was call Scratch-b-gone in California. My refrigerator should have been under warranty. They offered no other help. I live-chatted this morning and they say the same thing -- call another company. You are now out of service. Im so very disappointed in Whirlpool and will definitely rethink purchasing another Whirlpool appliance. My other stainless steel appliances are not having a rust problem -- just the refrigerator. I havent tried the Scratch-b-gone yet because on their website they say that a lot of Whirlpool products have a coating on them. VERY, VERY unhappy with Whirlpool and their customer service...

I’ve always bought Whirlpool appliances. They last a very long time. My washer is an old Whirlpool Ultimate Care II I’ve had for several years. My dryer is Whirlpool MOD WED4800BQ. Both working great for many years. I just bought a Whirlpool Fridge MOD WRS588FIHB00. All are worth the money for long lasting appliances.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

I have had this washer for about 7 years. I have not had any problems with it. I wish that it is stingy with rinse water. I see suds on the items before the rinse cycle and it doesnt seem to use enough water for a good rinse. Therefore I use the extra cycle.

Its been exactly a year since I first purchased my Whirlpool Refrigerator and its already giving me problems. The ice maker wasnt producing any ice so we replaced the water filter as suggested by the manufacturer. Now the refrigerator is not cool enough. This morning I was giving my kids cereal and poured milk into one of their bowls. After they tasted it the milk was spoiled. Yes spoiled. I was so mad I called Whirlpool and the fastest they can send a repair man out to my home is next week. Really? I said what about my food and my kids? They said its not their problem! I tell you they are so nice and friendly. They really care about their customers! Yea Right!!

We have all Whirlpool appliances in our home as well as our rental property. All of the appliances are of great quality and perform extremely well. The dishwashers are both heavy duty and do a tremendous job of cleaning the dishes. Both have a jet dry feature which is extremely important to us.

We are on our 3rd washer and second dryer in 10 years. Our latest replacement (Whirlpool Duet Washer and Dryer) was purchased 3 months ago and is already broken and now we have been without a washer for a whole month. Not only do they have issues with the control panel and latch, but they smell. The dryer also had a control panel issue. Trying to get our units fixed presented even more problems and wrong parts would come in, with weeks going by without parts/service. Apologies and sympathies expressed on the phone are not enough. When you buy a matching set and only one breaks, you tend to replace the matching unit, which we regret and we went back and forth with our washer and dryer. I would never recommend a Whirlpool product after this. We finally got a replacement today and due to more poor communication on their end, they could not hook up. My new washer sits in the laundry room, and I hate it before I even get it hooked up.

I have a Whirlpool top-loading washing machine model 3LA5580XSW3. The timer switch is not working and I have been told that spares are not available. Is this true? Everything else works well. Please advise as I really need a new timer.

This machine always leaves me questioning if its going to finish the cycle. It goes thru all kinds of spastic sounds in order to advance to the next step. I learned I cannot presoak a load more than 10 minutes before the machine empties ON ITS OWN! I just dont trust the machine and would not buy again.

Purchased heavy duty dual steam washer and dryer in 2008. Recently got some error codes that we could not fix. Had one service company come in and they could not figure it out. Had a certified Whirlpool company come in and they could not figure it out. They called Whirlpool technicians and they were even unsure of what is wrong. Said they could keep ordering parts and trying them to fix the problem. And of course I would be responsible for the parts. And no guarantee it would be solve the problem. Called Whirlpool direct, to no satisfaction. They said they could send the same company out and have them call the tech line while on site and try to troubleshoot the problem. However, would have to wait another 3 days to get him out. Been a week without washer. I have had washers bought previously last over 10 years without any problems. If these machines are breaking or control boards are going out after about 4 years, then Whirlpool has a bigger problem. Whirlpool supervisor was only offering to maybe a discount on the parts needed, without even knowing if they could fix the problem. Seems to me like they really dont care. Very dissatisfied, will definitely not recommend this product to anyone. And if it ever gets fixed, I am going to sell them immediately.

I purchased a Whirlpool washer and dryer from Sears in April of this year. Here, to date, I had to call four Toms to have this unit repaired. I contacted Sears to have the unit replaced. I believe this particular unit needs to be recalled. Sears informed me that the unit must be assessed by one of their qualified/certified technicians before a request to be valid. I have concerns about this statement. Employees will not go against their company in fear of retaliation. In addition, I paid cash for the unit and now cannot get my money back. I’m dissatisfied with Sears and their values.

Horrible. We purchased the set In October 2010. It worked great for a little over a year. (Go figure, just out of the manufacturers warranty.) The washer stopped spinning out water. Every other cycle completes successfully. The diagnostic cycle is also successful but once there is clothes in the machine, it wont spin. I called customer service and was told that a one year warranty was $230 and service is $130 plus parts. After reading another horror story, it seems that this venture is going to cost us around $450 for a new circuit board. Where is that class action suit at again?

Whirlpool has been my brand for years but I must say that after buying this washer #WFW75SHEFWO from Lowes - on sale, which is clearly a lemon, that I will never buy a Whirlpool appliance again. Not because I believe all of their products are subpar, but because the service on these units is unacceptable. The first call for service repair resulted in the Appliance Repair Service company missing the first appointment due to being overbooked, rescheduling and missing the second appointment due to illness, and the third appointment the guy finally arrived nearly five hours late. Supposedly they were a man short. When the technician finally showed up he claimed it was the board and the pump and scheduled a time to return to fix it and then he never showed up... No call whatsoever. Clearly a lack of clear communication and no respect for a customers time. I called Whirlpool to complain. Nathan, a supervisor was attentive. I requested a different company and was refereed to Appliance Doctor in North Hollywood. Rosa, the customer service receptionist at Appliance Doctor, is quite pleasant, professional and clearly wants to correct the numerous missed appointments that keep occurring with her Whirlpool appliance repair company. First repair appointment missed due to illness, next he came and did not really inspect the unit completely, and third appointment rescheduled nearly a week later due to a death in the family. No other repairpersons? I am certain it will be a car breakdown the next appointment. I have no patience for bad management because it is always an extension of bad ethics, which if you believe many of the negative reviews on this site Whirlpool and their various appliance companies appear to frequently miss the opportunity to engage within an honorable sphere. This is a new washer purchased only a few months ago. One technician mentioned it was due to overuse of soap/. The other technician was adamant that it was a sock stuck in a pump. Really? He did not open it up or even check the unit with any thoroughness. Error codes are enough. I was informed it would cost me and that this problem of the unit shutting the door and not completing the wash cycle was not covered by warranty. I informed him that I would call the manufacturer and insist on the unit being fixed. I did so and Whirlpool agreed to cover the repair. My schedule has been adjusted repeatedly to be present for these various service appointments only to have them cancel with a text. Bad business. I called Whirlpool repeatedly and was informed that socks must be put into a wash sack and no rugs with rubber backing. Again, my jaw dropped. What? I had an Amana washer and dryer for over 12 years and they worked great! So sorry I got rid of the Amana washer now. The Whirlpool is a piece of junk... Poor design and the fact that they are okay with such bad service has me calling around to other companies for a new washer and dryer set that will be on par with my Amana set. Whirlpool is clearly keeping these appliance companies in a brisk business with such abysmal technology. I am on the phone with another Whirlpool rep, Tracy, who is very attentive and helpful. The music playing while waiting, sometimes for 30 minutes, is similar to a film score, which helps calm the anger of time being wasted.

I felt compelled to write this review, to sum it up NEVER buy ANY Whirlpool, KitchenAid etc brand. Nothing but the worst experience, it all started with a 5 year old Whirlpool fridge that stopped cooling, I called and they said they could send someone for like 200$ and that it does not guarantee it will be fixed. So I called an independent and he tried to refill the freon, but it was leaking behind the fridge in a section you cannot access because they want you to buy another one, so 5 year old fridge in the garbage and now to top it off, a KitchenAid knife set that is barely used, one of the big knives broke cutting a fruit, and good luck in any circumstance getting any customer service. SO NEVER AGAIN, TRUST ME AND PUT YOUR MONEY ELSEWHERE ON ANY OTHER COMPANY.

We purchased the Whirlpool model# BFG1J4040T3NOV 40 gallon natural gas hot water tank in the spring of 2010. The pilot light went out this weekend, 2011. And it will re-light but does not stay lit. This was bought at Lowes, rated as a 9-year warranty on the tank and parts. This is premature failure of a product that is listed as 9 years. Due to all the other similar complaints of this Whirlpool hot water tank, I would like my money back plus installation. I do not want the Whirlpool replacement as obviously it does not work. I will use a different brand and vet it much better in the future. We almost purchased at Home Depot but decided it would be a better bet to go with the Whirlpool reputation and name and Lowes than with the only Home Depot option, which is the self branded water heaters. It was a big mistake!

We purchased the pair a year ago and its been nothing but headaches. First of all, half the clothes dont even get wet. They say its high efficiency but I dont think theres any efficiency when it doesnt even wash them. Second, when it actually does wash them, it leaves detergent all over the clothes. Imagine your black dress pants with white bleach like streaks all over them. We called because we were under warranty and a repair man came out. Totally useless. He said because its high efficiency, its supposed to do that. Not clean my clothes?? Why would I have purchased a WASHING machine that doesnt clean clothes?? Is there some other use for it Im unaware of?? He told us to try using deep water setting and extra rinse. So now we can wash 3 pair of socks at a time instead of one. Yippee.Do NOT BUY THIS CABRIO WASHER, UNDER ANY CIRCUMSTANCE. Youd be better off with a plastic bucket from the dollar store. If you get it as a gift, the person who bought it for you may secretly hate you. I wish wed had the benefit of these reviews. Now were out $1500. Will NEVER, EVER BUY A WHIRLPOOL PRODUCT AGAIN. Not only does it not work, they refuse to recall it or refund it. Off to the laundromat to WASH my clothes.

I had my entire kitchen re-modeled in May of 2013 and purchase all new Whirlpool appliances. I work for Standard Pacific Homes and purchase the identical appliances we provide in our homes. I am so disappointed in the refrigerator. Two months ago it stopped making ice and I was told to replace the filter and it would be OK. I did that and still no ice. I bought ice trays. A couple of days ago, I came home to find water on my kitchen floor coming from under the refrigerator. I called Whirlpool again and no real help.... Told me to call Lowes. I called Lowes and they gave me 3 more numbers to call for service. None of those service providers had any available appointments and told me to call Whirlpool. Meanwhile my refrigerator is standing in the middle of my kitchen so I can keep the water mopped up. The refrigerator was so difficult to move. Getting the feet moved up so the wheels could touch the floor took an hour and I ended up with bruised hands. My lesson in this is to buy a better brand next time and go top of the line. I sell these to our buyers at Standard Pacific Homes everyday..... Wish I could believe in the product.

We bought this 26 cu ft fridge from Nebraska Furniture Mart in April 2017. In November stopped making ice. Was repaired. Now it’s not working again. Multiple enquirers shows this is a common problem with this fridges. I’m debating whether it’s worth the effort to repair it or just put in junkyard. WORTHLESS piece of shiny metal.

Bought these Whirlpool Cabrio Platinum combo about three years ago, nothing but junk from the get go! Washer never gets clothes clean, towels always come out smelling mildew and sour no matter what liquid soap you use Tide, Gain, whatever same results. Plus always mold coming from inside tub and yes we use refresh weekly and wash it out on refresh setting. I’m so tired of our towels smelling sour but can’t afford to buy new washer and dryer living on fixed income. If I could these would be in the recycling yard now. From everything I’m reading all new H e machines are crap and energy efficient my foot. I wish for my old style washer and dryer. WHIRLPOOL YOU HAVE LOST A LONG TIME CUSTOMER!

We purchased a new stainless steel Whirlpool refrigerator in February 2015. Within the first few days the fridge door handle broke off. Not that we have super human strength in our 60s but the handle connection is a very thin plastic. We put it down to the possibility that the warehouse or shippers may have banged it and perhaps we just didnt notice the initial crack. The handle was out of stock so it took 8 weeks before the new one arrived. This week the freezer door handle cracked! Same problem - cheap plastic handle connector doesnt withstand the vacuum seal. Whirlpools handle connection to the door is comprised of a 1/8th inch thick by 1/4 inch square piece of brittle plastic. This is screwed onto the door. In reality this needs to be metal. Enough said… Check out the handle connection before you buy this appliance. You will wait months for replacement parts as they cannot seem to keep enough of them in stock.

The felt drum gasket came off our 6 month old Whirlpool Cabrio dryer purchased through KB homes. When I contacted the helpline on the 16th of May I was promptly set up with an appointment on the 18th of May. On the 18th I called to confirm a time and the company that whirlpool subcontracts in San Antonio, said they had no appointment for that day and the soonest they could get out here was June 1. I contacted Whirlpool to let them know this wasnt acceptable and I received many apologies and I understand how you feels. I asked how is it you have one company in all of San Antonio to service our dryer? Again more apologies. Then I asked since when does only apologizing and saying, I understand your feeling, be the end all of your customer service? No reply to that so I called Sears who promptly had a repairman out to the tune of $200 bucks with my military discount. Never again Whirlpool.

Whirlpool Cabrio washer - Do not buy this washer. I have never placed a comment on the web before, but after reading about the same problems over and over, there should be a class action suit. The spin cycle will not balance. You have to stand over the washer and readjust the laundry. I called Whirlpool and I was told to unplug unit for 5 mins. This is a $800 washer that lasted about 2 years.

I have spent 30 minutes trying to change light bulb under the oven and get the cover plate back on. I watched the film on how to do it, it was amusing to watch the struggle to get it on. It was amusing to say the least. Whirlpool watching it??? I do not believe whoever designed this worthless time consuming light cover never tested it one time, or it would had been more user friendly. It amazes me what kind of trash they can build for us consumers to have to deal with at times. Tomorrow this overhead piece of junk is coming out and being replaced by a non Whirlpool one. I am going to get a tractor and smash it into little pieces and put on side of street with a note saying this is what happens when you try for an hour to change the bulb.

My Whirlpool stove and oven have been absolutely wonderful. My Appliance is 18 years old and Ive never had a problem with it since the day I bought it. I recommend Whirlpool appliances for the whole house.

I love my washer and dryer. The only problem I had over the past five years since I bought them was when the motherboard went out on the dryer. Luckily I had insurance, so was able to have it replaced. The features on the machines and their ability to clean really well have made my life much easier when it comes to doing laundry!

I bought the W04H02 SKU Number 13219771. I decided to wait to write this review until Trail Appliances hauled away this piece of junk, which was this morning. I bought this fridge July 2013. In June 2015 the freezer first konked out, so I started using my deep freezer. Then by October the fridge went. I called in my repair guy, who told me he sees this all the time with this fridge and carries many motors for these garbage fridges in his vehicle at all times. So $375.00 later it worked for about 3 1/2 months. Just long enough until the warranty again ran out. At this time I started to read the reviews about Whirlpool, and I was so mad at myself for not reading the reviews first. All I can say is I would never ever recommend this product. I am glad to see this junk out of my home. I never wasted TIME CONTACTING WHIRLPOOL, AS BY THE REVIEWS I READ, THEY DONT STAND BEHIND THEIR PRODUCTS. THEY ARENT WORTH THE TIME.

A couple of years ago, we had 2 natural gas hot water heaters installed. We immediately had a service call to replace the thermostat on one of them. Then recently, the other one had to be replaced because of the leaky tank. It was still in warranty, and we had to pay $425 for the old one to be removed and the new one installed. Now, this one has a bad thermostat and the A & E Factory Service is coming tomorrow to install the new thermostat. We have been inconvenienced by this for a couple of weeks as we have no hot water in the master bath. We were just lucky that we had one hot water heater working in the other part of the house. I think that Whirlpool should have paid the $425 for the installation as the original hot water heater was in warranty. Now, I hope that tomorrows visit will be covered by the warranty. Next time we need an appliance, we will not be purchasing a Whirlpool.

I purchased a whirlpool under counter oven - my main reason for not buying something cheap was the safety of my family - I chose the AKZM656 eye level oven. The stove is about two years old, but we do not use it that much. Two days ago my wife set the timer and placed a dish in for cooking; she then went outside to water the garden. About twenty minutes later she returned as something was burning- the oven reached a temperature of 350 degrees and would have burnt the whole kitchen down if she did not spot it. Now surely the oven should be designed to switch off if sensors fail? I reported this to Hirsch (Ballito) but they say they have no one servicing the Richards Bay area. I am not sure if this stove should be fixed as it is obviously not safe and makes me wonder how Whirlpool get safety standards passed on these items. Surely you expect better when buying a well-known whirlpool brand?

As I write this, I am on my 5th service call in four months of ownership. The machine runs short cycles and requires us to not only do an extra rinse, each load requires an additional Quick Wash (with extra rinse) to get the detergent out. We use so little detergent that a 75 fl. oz. bottle has lasted four months with over 50% left. The techs Whirlpool sends are great. The call center first level people are fabulous. The supervisor is not helpful proclaiming that it was fixed. However, we still have to re-run the clothes every time.

Our Model # WRF532SMBW refrigerator was purchased on 8/21/14. In the last several months, it has begun having problems with ice build up in the bottom of the freezer, as well as water puddling around the front legs on the floor. I called Whirlpool and they suggested it was our water line, but it does not leak onto the floor daily. They then suggested I have a serviceman come out for a $120.00 service call, plus whatever other expenses that occur. Or, I could just pay $322.00 and that would take care of the service call, parts and an additional one year warranty. We just bought this refrigerator 23 months ago and it cost $1618.92. Now I need to spend $322.00 additionally! What a rip off. Do not purchase a Whirlpool Refrigerator or any of their other appliances. I see this is a common complaint and wish I had read the reviews earlier. The appliance is only 2 years old.