I bought it a year ago and the warranty is not even up and only in about a month the freezer door handle keeps falling off then the stainless steel which probably is fake is rusting too. They replace the handle and the door and the handle still keeps falling off and the doors are rusting again. My GE stainless steel dishwasher and stove are five years old and there is no rust on them. Whirlpool says it is cosmetic and that its not covered under the year warranty. I will never buy Whirlpool again. Awful customer service!

This machine, like all other water sensor machines, will not let you wash a few items that are lightweight without filling the whole machine up almost all the way. The reason being is that if the items are light, they will float in the water above the water level and the sensor thinks it needs to put more water in and even with putting something in to weigh it down like a wet towel doesnt always work, nor should you have to do this. You will waste more water in the long run if you only have a few items to wash, ie baby clothes, underwear, rags, etc. I am so disappointed that I had no other choice but to get this machine.

A top loading washing machine with an agitator in my opinion, gets my clothes 100xs cleaner than one without. Ive owned front loaders and top without agitators. Never again. Top with agitator is my personal preference from now on. Also Whirlpool has never failed me unlike other brands.

I purchased a Whirlpool wash machine and dryer from Home Depot 3 years ago. From the outset we had problems with both units. Wash machine spin cycle does not work properly, and that causes a problem with getting clothes dry. Some soiled clothes will not clean properly and have to be hand washed. Dryer rarely works on one cycle, towels and bed sheets have to be run through a second cycle. These are NOT energy savers. Garbage product, I will never buy Whirlpool again.

I purchased the Whirlpool Cabrio, Model no. WTW5640XW2, on March 3, 2012. I have tried every setting and water temperature and am totally dissatisfied with the washer. It does not clean clothes, tangles them into a twisted mess which requires that they be vigorously shaken out, destroys anything with a draw string. I had an online chat with a representative and was told she was sorry. I posted to Facebook and did receive a call from a repairman, which I will return; however, I do not anticipate receiving any satisfaction. The machine is worthless for washing clothes. I was better off with my 12-year old agitator Whirlpool washer. I do not understand how this machine can be allowed to stay on the market. Id be better off at the river beating my clothes against rocks. I hope someone will get on Whirlpool to give consumer refunds. I have been brought to tears by this machine and I am one tough cookie. Please help!

We purchased the Cabrio washer & dryer with 6th Sense technology in 6/2007. What a mistake it has been. We have had 3 F1 error codes that a repairman has had to come fix all about a year and half apart. It makes crazy loud sounds if it decides to actually spin in the final spin cycle. It normally does not spin. It just always flashes UL for unbalanced load. We are extremely dissatisfied with this set. The dryer heating element has gone out also. We just purchased a new part. Prior to this, we had a hand me down washer & dryer that worked excellent. We regret getting rid of them, and now need to purchase a new washer & dryer. Whirlpool ought to stand behind its products and get this fixed.

I purchased this Cabrio washing machine in December of 2016. I have had a huge amount of trouble with the soap not washing out along with it tangling my clothes. This has to be the worst machine I have ever purchased.

In open concept homes, manufacturers need to consider the refrigerator’s noise — ice makers included. We hear every single clink and buzz. We love (and prefer) the french door concept, but the freezer drawer, when it’s fully loaded, is difficult to open and close. Also, the stainless steel scratches WAY too easily.

Last week dishwasher leaked. Set up repair with our local gas company that has service plus. Came today. Repairman showed me there is a hole in the bottom of the tub. Upon closer inspection it looks like the manufacturer drilled a hole that wasnt needed so they routed out a depression in the tub and must have put in some sort of plug or filler of some kind which now came out. I called Whirlpool and explained to lady about the defective tub. She said well if it had a plug of some sort put into the tub it would have fallen out before this. I said Well it didnt it just must have happened as it never leaked before. She said it is no longer in warranty. I told her this is a defect to me as if you drill a hole in the tub that wasnt necessary and then the plug failed that you put in to hide the extra hole. It is a defect not a warranty issue. Upshot is she wouldnt do anything about it. I told her I have always bought Whirlpool but if this is their policy its the last time I buy anything made by Whirlpool. After reading all the complaints registered here about Whirlpool I guess I am more than fortunate as my dishwasher (bought in 2006) had run great until their plug fell out (Great except for all the rinse aid that has leaked out for several years.).

We have a built in double oven and we had some early problems with the thermostat. And from time to time the clock resets to 12:00 oclock when there is no other power outage indications. Its also been a challenge understanding the instructions sometimes.

Whirlpool Dryers: I have 2 Duet Dryers and the user interface has gone bad with both several times. I called whirlpool several times to repair. The last time, they refused to repair the dryer. I started having problems with my dryers within the first 6 months of owning them. The repair guy that they sent out the first time said this repair was a major problem with the duets but the company chooses to not acknowledge the problem. They should be required to have a recall. Never by this dryer, you will regret it!

I purchased a Whirlpool WFW9050XW washer in Aug 2011. I have had nothing but problems. Sears sent repair tech 2x; it would work for a couple months and stop. Whirlpool has sent new motor, tub, switches, etc. I feel I bought a lemon and I want Whirlpool to replace the machine.

This is a great choice if you like a drawer for a freezer. It’s double door. The racks are easily moved. There’s are drawers for beverages and cheeses and vegetables. One downfall is replacing water filter cartridge every couple months and freezer could be set up a little better so you don’t have to pack things on top of each other.

Because the Korean appliances are a problem for repairmen, were stuck with a Whirlpool choice. Seems to be a good fridge. Noisier than my Kenmore (Korean). I got instructions from repairman on opening right door first and closing it last. Otherwise rubber wears out too soon. If I put anything on left door opposite ice maker, it freezes, making that shelf useless! We had ordered a Kitchenaid but the installers damaged it.

I purchased a french door refrigerator in March 2013. I purchased the Gold Series because I wanted the best. I have come to the conclusion that Whirlpool does not make a refrigerator with the quality to reflect the Gold Label or any label. My ice maker system created ice dams inside the fresh food area, in the ice bin compartment and allowed water to run into the fresh food area and floor. After four repair visits, I am still dealing with occasional water running down the inside of the ice maker door and into the fresh food area. I contacted Whirlpool and tried to get the defective refrigerator replaced; however, the very rude customer service representative insisted on another repair call by A&E. They scheduled the appointment for a time different than we agreed upon, so at this point I have had to cancel this appointment. I do not know why anyone would want to buy an appliance made by Whirlpool, which includes several other brands.

Broken drip pan was cracked, replaced, and wood floor damaged, also replaced. Compressor replaced. Ice warmer replaced. Hinge on crisper door broken, replaced. Freezer door handle keeps falling off. All this in first year. Builder purchased 1 year Extended Warranty. Freezer ices up occasionally. Repairman advised using a hair dryer to free up the rails. All this on a $2,000.00 Whirlpool Refrigerator. Do yourself a favor and dont purchase this Refrigerator. Model #G16FDRXXY.

Bought Whirlpool French door refrigerator. Unit was defective when delivered and I told them so. That was on 06/14/2013. Unit got progressively worse and finally has quit completely. At Whirlpools suggestion we bought a Whirlpool Repair Plan Plus One (another scam) for $300. Repairman came out and told us the refrigerator couldnt be fixed. Now Whirlpool suggests their only option is for us to buy a discounted model. This refrigerator went from bad to not working at all in less than a year and a half. Anyone that buys a Whirlpool appliance with knowledge of how they treat customers and back their products has to be a little crazy.

Whirlpool Cabrio Washer WTW7340XW sounds like a small jet during spin cycle. The Whirlpool Cabrio Washers have a very well known and well documented problem with the tub bearings failing. Many many disgruntled owners have posted their complaints online, and there are many videos showing the issue on youtube. This issue is so prevalent that the manufacturer has created a tub bearing failure repair kit for $350. The repair is so expensive and labor intensive that many of the certified Whirlpool repair shops no longer work on the Cabrio washer stating that a better washer can be purchased for the cost of this repair.That said, the manufacturers customer service group denies that the Cabrio tub bearing failures is a common problem and are quick to state that Whirlpool holds no liability for this problem. Ramping the complaint up to a customer service supervisor is met with the same canned response. Regardless of the thousands of complaints Whirlpool is claiming that it is normal wear and tear for the tub bearings to fail. The manufacturer should recall the units for this manufacturing defect in the Cabrio design.

I purchased the Amana washer # NTW4560YQO 10 months ago - when I put on the warn setting I would get an alternate cold warm but a warm wash. At the beginning of July suddenly all I got was cold water. The machine is still under warranty so I called and I got an authorized repair person who came out and replaced the mixing valve.. then I went to wash clothes and yes all I got was cold water. The authorized repair person came out and could not figure why. He called Whirlpool tech dept and they told him it was working the way it was supposed to. Now it does not give any warm water so I do not know how the tech person can make that statement.They then sent yet another authorized repair person from a different repair company and yet again the tech person said it is working the way it is supposed to. IT IS NOT WORKING THE WAY IT WORKED WHEN I PURCHASED IT AND THE WAY IT WORKED FOR 9 MONTHS. When I called customer disservice they kept repeating, our tech people say it is working the way it is supposed to. Then they tried to tell me it was the ground water. I want to know how many others out here have had the same problem. I really feel this is a defective machine and I want my money back or I want compensation and an acknowledgement that there is a problem with their crappy machine.

I went to Lowes and purchased a new kitchen full of appliances. The refrigerator is the bottom freezer, French door with water inside. The problem is the freezer stays cold and the refrigerator does not. The vent from the freezer gets frozen, and the refrigerator part stops working. Its only 3 years old . We were told it would cost 700 bucks to fix it, and that a power surge could make it happen again. The capitol of power surges, Florida, what a complete waste of money. I spent my life in retail selling their products. Im so sorry to all who have purchased from me... Its really a terrible product. I would give you all a refund if I could. This really hurts...

Thermal couple went out and nobody has one. You have to get it from whirlpool. This could be a easy fix with buying a $6.00 thermal couple but the one on mine has left handed threads. I took it to several parts places and they all said you have to buy it from whirlpool so you have to call the 1 800 number and they ask you how soon do you want it, 5 to 6 days to take a shower for $10 shipping, or $20 for 3 to 4 days without a shower or $32 for overnight? This ** should be free if they are the only ones that have it. I never heard of this crap before. The funny thing is they told me I should replace my water heater since the warranty is expired. Dont worry I will buy a new one someday and it will be anything but a whirlpool. I will never buy anything whirlpool again and make sure my family never buys whirlpool.

Purchased washer 8/2015. Washer quit working 12/2015. Would not drain or do anything. Repairman dispatched and came 3 business days later. (They dont work weekends.) Repairman looked at old receptacle cover and immediately stated, Problem with polarity of plug. No prior problems with plug running appliances. Plugged into it for over 8 years. When I advised him of that then he started troubleshooting circuit board. He cleaned out the machine and got it to work. (Still under warranty) 4 days from repair, and machine quits. Same problem. Wont drain and wont do anything. Call for service again on Weds. morning and given following Tues for service call. Online consumer reports complaints #ered at over 1,7000. Same machine, same problems. Call Whirlpool directly, given runaround. Talk to Whirlpool mgr. (Robert) complaint # **. He states, Have to wait for service. But calls Brandt Melb., FL to try to get sooner service. Brandt calls me stating they have ordered a lid lock and CCU board for machine and will be out Monday. How would they know to order these parts if it is not a constant issue? Im thinking class action suit for shoddy product... LOWES Indian Harbour Beach, FL. Transaction #**.

I love my washer and dryer but am a little disappointed in a few areas. First, my washer stopped spinning normally after a few years, I forget exactly why. Then my clothes were too wet when it was done. My dryer then did not get my clothes dry in one cycle. Also, it was going to cost $500 to fix my washer which wasnt worth it. But Whirlpool did send us a new tub and all the parts for free. Thankfully my husband is handy and after finding a YouTube video, replaced it all and now it works again. My dryer still doesnt always dry everything all the way. I often have to do 2-3 cycles in the dryer to get my clothes dry. I thought there was supposed to be a sensor that would keep the dryer going until there was no more moisture. Maybe that is broken too.

This refrigerator is a disaster. You will never be able to leave your home for any length of time for fear of a storm putting your electricity out which turns it off and if it DOES NOT TURN BACK ON WHEN THE POWER IS RESTORED. If you happen to be away for several days you will come back to a freezer that has defrosted all over your floor and your food in the refrigerator spoiled.

This oven/range (W10665261B) has a cleaning feature that DOES NOT WORK! Do not buy unless you want to hand scrub the oven without any cleaning products. No one at the company cares. I will discard the oven.

I just bought a new home, and it came with what was described as top of the line Whirlpool appliances. The Cabrio toploading washer worked for two loads then just stopped. After arguing with Customer Service for a while (They insisted this must be an installation error.), I talked with the builders. They gave me a different customer service number. My second call got me a repair appointment, during which the repairman discovered that the pump was in fact dead. Because this is a new model, they didnt have a replacement on hand. So, I will have to wait an additional week and a half before the part is installed. This is a product that retails for around $1000, and it lasted less than one day. My last washer cost $400 and was still running fine when I sold it after 10 years. I can already see the handwriting on the wall. After my warranty is up, I will have to replace this hunk of junk with something that has some reliability.

Dont buy this washing machine. All of my clothes are dingy and gray. I paid $1,751.96 for this set. What a big waste of money. Sometimes the clothes come out with dry spots and then some come out with lint like they have gone through the dryer and yet they are coming out of the wash. Often they are in a very tight large ball in the center of the machine. I distribute evenly around the machine and I dont overload. The brilliant engineer that decided the machine did not need a soak cycle is a person that has never washed clothes. Wish I would have taken pictures of some of the soil still left on my clothes.

It was about 6 years after purchase that the ice maker completely quit making ice. To change the filter you have to get down on your hands and knees to do so. If youre elderly, this can cause a problem. Overall, it was a good refrigerator.

Bought it less than 2 months ago. It doesnt wash. It doesnt spend. It works every 2-3 hours if Im lucky. Its the worst product ever. Its not like it was refurbished. It was brand new. Smh. I thought it would save me money by buying a washer. Off to the laundromat I go. I do not recommend this product especially to someone who has a family and on a budget.

Refrigerator model LFFU17F5HWD - For 2 years it worked, but with problems - always frosting over. I called a service tech and they said it was a common problem, but to find a service tech to come and look at it. The cost for that was $250.00 and still no fix. Now it quit working completely. I was always told by my dad that Whirlpool was the best - maybe true, 30 years ago. I know one thing if I have to buy another refrigerator - it wont be a Whirlpool. You do stand up to your name Whirlpool of trouble. If anyone reads this, please take my advice and do not buy a Whirlpool. I have a washer and dryer thats Whirlpool too. They work but I wont have anything in my house that says Whirlpool on it. Its too bad that they were a great product at one time. Consumer Reports should do something about this company or the BBB. Im so mad I cant even spell well. Thats my 2 cents on Whirlpool of crap.

Ordered this two days after my son came home from college. He had to be out of his apartment July 31 2016 and brought 4 years worth of laundry with him. Monday my machine breaks, Tuesday I order this thing from Lowes Arrives at 2:30 on Thursday and as it is being installed I ask why the water fill is so slow. It is trickling out like a childs toy. Delivery man tells me the water is completely turned on. He hears this remark a lot from people who buy this model. I put in my first load of laundry, a small load of about 6 things that I am washing for my mother who is in a nursing home. They have that nursing home smell. I push pause as the machine is cleaning to unlock the lid and peek inside. Oh my God the clothes are sitting on top of each other not even covered in water. I then shut the lid and listen to the tiny slush of the machine agitating. At the end of the cycle they smell exactly the same. Dirty.I had read to use the deep fill so I rewash them on deep fill. Look inside halfway through and what do I see? Wet clothes piled on top of each other, still not floating in water. How are these clothes getting clean when they are in a wet pile on the bottom of the machine? I take them out. Still not clean. Not smelling quite as bad, but not smelling like soap. I then washed sheets, a blanket, and some clothing of my sons. Nothing smelled particularly dirty but NOTHING smelled like soap. The quilt was covered in hairs (my son and roommates had a dog) and soap residue. I had read this in reviews online also. I am wasting time since each load takes from 50 to 130 minutes (yes). I am wasting soap, oh but I am saving water - not really.Well Lowes has a 30 day return policy so I went down there and am expecting a GE machine with an agitator tomorrow, Saturday! Cant wait. The only one saving money are these manufacturers They no longer are spending cash on producing the agitator out of plastic, attaching it with nuts and bolts, or using gaskets between the parts. DO NOT BUY THIS PIECE OF JUNK, do not even look at it. I question all the HE machines at this point. You need to use HE soap cause you cant wash away suds in a machine with no water. What a con - the whole thing is.

I bought an electric range at Lowes. The oven stopped working after 10 months, which means it is still under warranty. A repairman came out twice and put in new parts. He said all had been replaced that could be replaced. I will call him again and see if he can do anymore. I dont think I will buy from Lowe’s anymore and certainly not a Whirlpool.

We have had this Whirlpool Duet WFW9150 washer for 7 years, doing 2-4 loads a week. Overall we are quite satisfied with it. A few complaints: We are on a well, and so get the odd bit of crud in the water. The machine has filters on the inlet lines, but you must pull it out from the wall to get at them. The filters are hard to remove. If something goes wrong--power blip, or sensor something, you have to restart the cycle. There is no way to continue from where you left off. There are features I wish it had: Rinse with warm or hot water, a spin only cycle, And Im in a hurry and it isnt very dirty cycle (Shortest cycle is almost 2 hours). Whirlpool doesnt have a service center for our area. If we need repair we need to take it into town. This is inconvenient.

Favorite feature is the double oven. Both ovens are separate self cleaning. Top oven smaller, perfect for a pizza, cookies, small stuff. Great features for entertains, multiple foods can bake at same time. Ceramic top easy to clean, boil overs cannot seep under anything. I have had this oven for over 10 yrs, minimal repairs.

My family purchased a newly built home from a reputable homebuilder on December 21st 2019. On the first week of January 2020, we noticed that our upgraded Whirlpool dishwasher, model #WDT730PAHZ0 was shutting off mid cycle, resulting in dishes remaining dirty. The technician gave us an estimate of nearly $500 for replacement of pump motor assembly. He also informed us that this particular model is well known for having this defect. We are requesting that Whirlpool stand behind their reputation for producing reliable high quality products by replacing our dishwasher.

Well, I read most of the complaints with the failures in the machine. I guess most of them didnt last long enough to rate their performance so here we go. I bought a Cabrio top loader, high-E washer a couple of years ago. This one had a different kind of agitator - it was just a couple of inches or so off the bottom. I specifically bought this to wash comforters and it seemed like it was good for that (rousing agreement from the salesperson). So after a couple of years of working with it, here are my observations:Pros: There are absolutely none!Cons: Okay, other than not having control over the settings (cannot override any of the preprogrammed wash settings), it simply doesnt get loads clean (yes, I use expensive HE detergent). Except for the bulky setting, there is never enough water to wash and rinse the loads properly. Next, it makes a mess of the clothes. At the end of the cycle, and this is true no matter what I wash or how large or small the load is or which cycle I pick - even light and slow spin, it just makes a tangled mess of the load. Stuff gets stuck inside of other stuff, wrapped around other stuff or are balled up. Never have I seen this type of issue. I constantly get the unbalanced load notice and have to manually redistribute the clothes most of the time.To address the too little water level, there are two options. I have discovered that the bulky setting has the highest water level, so I use that most of the time. From time to time (when I need different water temps or just want more water), I have developed a work-around by putting a Y adapter on the hot water inlet and a short hose. Once the washer starts the wash cycle, I stop it and add a bit of hot water to bring the level up enough to do a decent wash job - same for the rinse cycle. So much for Whirlpools water efficiency.Next, the hot isnt hot. Its barely lukewarm. So I turn the cold down to a trickle and I get a bit hotter water. It takes forever to rinse though. Its a good thing Im semi-retired. Next is the inflexible cycle/water selector. I have never had a washer I couldnt override to tell it what to do in unusual circumstances. Boy, what rocket scientist at Whirlpool dreamed that up!But above all, this just doesnt get loads clean. I have experimented with all the variables, load size, cycle selection, detergents, etc. Most of the time, I have to do two cycles with my loads and these are not unusual or extremely dirty loads. They are just normal, everyday laundry for an adult couple. Really, Whirlpool! Who was the conceptual designer on this? Thank goodness they werent working on the space shuttle or some disease research.Bottom line, I am so soured on the design and performance of this product that I will never buy another Whirlpool product, either brand name or generic (Sears). I just cant understand how a company would let something like this out the door.

We purchased an over-the-range microwave in 2005 Model No. MH1141XMQ-1 Serial No. TRS1112979. It has worked fine however, within a year, the grill cracked. It was not covered so we paid for a new one. A few months ago, I noticed a crack near the top of the door by the handle and then a couple of weeks ago, a huge chunk broke off the bottom of the door.

My wife and I bought my mom a Whirlpool Cabrio. It worked fine but after a while it stopped working properly. It would take forever to start washing. We called Lowes and they said it was fine. Second time they came out, they replaced a part that was the problem. Again it didnt work. Would start to wash two to three hours after you hit start. My mom had nothing but problems with it. My wife and I had a Samsung washer and dryer which worked excellent. We sold them when we moved and our apartment had no washer/dryer connection. I should have given them to my mom. So she was tired of her washer and we set out to buy a new one.So since I had a Samsung, I convinced to get one also. We went to the Sears outlet and found a really nice Samsung washer for around $500. So far, the machine has worked well. No complaints and gets the clothes clean. So for anyone that has had problems buying appliances and is looking for a new one, well, Samsung is doing a great job so far.

Ill be just as responsible as Whirlpool and Nasons has been... I bought my Whirlpool stove less than 2 yrs ago from a reputable business in a nearby community, CROWN POINT, INDIANA! I have had trouble w/ the burner knobs ever since I bought it...just brushing up against them turns them on. Enough gas escapes into the kitchen... I bought knob covers to prevent that (they did NOT work)! So I called the place I bought the stove from and they sent out a repairman...he said there was no fix for it... but that I owed him $69.99 for the service call. And every time I turn the oven on to heat it to bake something you smell gas also... Im almost afraid to use it... 3 nights ago I woke up to the kitchen filled w/ gas...knob covers on but still one was still on a bit... it was a whopping -25 and we had to open windows to clear out the gas... you shouldnt have to check the knobs once youve turned them off. Nor should they come on when you brush by them...when youre not even cooking... Granted I am short but the serviceman said I should move everything I needed to cook w/ closer to me so I didnt have to brush up against the stove... what????? I have cabinets above and all around the stove. What I cant use those cabinets????? Something is terribly wrong w/ the stove and the service... If youre in the market for a new stove, dont buy a Whirlpool and for certain DONT buy anything from NASONS appliances in Crown Point Indiana... They along with whirlpool dont stand behind their product... They told me they never had that complaint before. WRONG, I read it more than once on this site...liars all of them!

The duet washer is just over one year old and started showing F25 code on screen. It had been making a really loud noise in the spin cycle. Last week, a really loud noise and then the loads wouldnt be spun. There was a puddle of water on the floor near the machine. We had a repairman out today and he stated that theyre repairing these machines all the time. He stated it was the bearing and that theyd been told that Whirlpool had installed bad bearing from a different supplier. I called the Whirlpool experience and after 4 minutes and 19 seconds, I actually spoke with a service rep. She said since my machine is less than one month over the one year warranty, Id have to call the extended warranty people. I asked for a supervisor and after 2 minutes and 38 seconds, she came in line and wouldnt budge from her story. They also stated that there are no service issues with this model washer. Extremely poor attitude and Whirlpool is doing everyone, whoever purchased a duet washer, a terrible job on these washers. At least, Ive now found out that there are a lot of other folks out there with the same problem. We need to get some attorneys to start a class action just like the mold/smell customers did already. Sad, sad day for Whirlpool as Id been a customer all my life.

We purchased KitchenAid Model YKESS907SS05 Electric Range from Appliance Canada April 2012, just before we took possession of our new home. We began using the range in July of that year and it worked well until September 11, 2014. At that time we decided to use one of the features of the range which is the self-clean feature. During which the control panel failed and our oven ceased to work.We contacted Appliance Canada and they suggested a technician come to assess. We called the suggested number and they send a technician that was not Whirlpool certified and we had to pay out of pocket for the visit $158. He did absolutely nothing during the visit. We then called Whirlpool Canada and they informed us that he was not Whirlpool certified and to call Appliance Canada, we immediately called Appliance Canada and made arrangements to have certified technician come to assess. Whirlpool Canada also indicated at that time that the board that failed was still under warranty and we should not have to pay. September 22nd the second technician came to assess the situation, used tape to cover the front blowing air duct so as not to have the hot air blow back onto the control panel. This was a temporary fix, they ordered a control panel in the interim that they would then use to replace. The control panel came in October the 22nd, was replaced and the new board was faulty, put old one back in and re-ordered another board. The part was on back-order. By mid November, after numerous calls, we called Whirlpool directly. They authorized that the technician to get the part from another supply source. On November the 26th, technician came back - tried new board could not get it to work, left it with us and ordered additional parts. At that time the technician who was taking the case had a family emergency and would not be able to come back out until the new year. Subsequently, Appliance Canada authorized a new company to resume our work with a new technician (Toronto Appliance). He came out December the 17th, with the board that was left behind, he was able to get the oven working. December the 22nd while in the middle of cooking a meal, the oven failed again. We called Appliance Canada and they had a Technician scheduled to come December the 24th from Toronto Appliance. However, on December the 23rd the oven resumed working. The Technician came on the 24th but because the oven was working again could do nothing. On December the 31st, while dinner was in for guests, the oven failed yet again. We called Appliance Canada, yet again, and they scheduled another visit with a new control panel and additional board. The technician arrived again today, January the 28th, and could not get the stove working. He was instructed to order an additional part and we are to wait another 2 weeks. In total, we have been waiting for 4 and a half months, we have also been told that we were not to have used the self-clean as this causes these types of problems. Why is it offered, in addition, Whirlpool has not supported our direct calls, nor authorized the replacement of a product, that for all intents and purposes, is faulty. We have had no success in the resolution of this issue nor support to reach a resolution from all parties involved. I would suggest not buying any product from those involved as their lack of support for their product is appalling.

I have purchased two Whirlpool microwaves since 2007. The first unit lasted 5-1/2 years, the second one lasted only 2-1/2 years. I used it at dinner but several hours later it was dead. After reading other reviews I have decided it would be cheaper and less stressful to get a new one. So Tomorrow I will be purchasing a new microwave which WILL NOT be Whirlpool. I no longer have confidence in any of their products.

I purchased a Whirlpool washing machine (new) in 2004. From the beginning, I had problems with the spin cycle. I phoned Whirlpool. I paid for service with no reimbursement. With the costs I have had for service, I could have purchased 2 machines. I have had to go to Laundromat to do wash then come home to dry. I have for 30 years only purchased Whirlpool large appliance. My washer and dryer were always refurbished but they were Whirlpool. I have had a (refurbished) Whirlpool dryer since 1997 with one (1) service call. However, this wash machine, purchased new, has been a money pit and a piece of trash with Whirlpool only giving lip service when calling. Also, going to the Laundromat, I have been amazed at how many individuals I speak with are there doing wash because their Whirlpool washer, mostly even newer models than mine, do not work! And they have the same story. There’s no service when you call. Shameful Whirlpool! Buy your parts from us. Maybe your credibility could be restored. But I will never purchase your Whirlpool or other names under Whirlpool! When I do get another washer, yours will be put on my front lawn with a large sign of your disgraceful products and service!

Washer MOD WTW4800XQ2 - I purchased this washer about 2 years ago after my 15 year old washer died. I have always used Whirlpool appliances as well as my Mother that recommended Whirlpool to me some 40 years ago. I knew when this machine was delivered and set up that I was in for change. It locks down to where you cant get in it for too long of a period of time. I am a really busy person, and HATE this, but if that were the only issue, I could accept that. We live on a farm and our clothes get really soiled especially in the warmer months. I like to pre-soak white clothes, NOT happening with this machine!!! It ends the cycle after about 30 minutes so I have to start over, wasting water. But the main issue is the machine tries to level the clothes, or whatever it is doing on its own before filling with water. I wash a lot of clothes!!! I am going to say that 90% of the loads of clothes that I have washed with this machine have been off balance, banging around bad. I then have to wait for it to unlock so that I can pull out the dripping wet clothes and replace to try and get it balanced. I am 59 years old, I got married at 14. So Ive been washing clothes for a LONG time... This machine is junk to say the least. I recently house sat for family. They purchased a new GE washer and dryer a little bit before I got these, wonderful machines!!! I washed dog beds, sheets, blankets and tons of clothes during this time. WOW, I had forgot that washing clothes didnt have to be torture. I will NEVER purchase another Whirlpool product. This washer has exhausted me. I purchased it at Lowes on tunnel rd in Asheville, NC. Please, if you havent already, junk this design... Its gonna lose your loyal customers. This complaint has nothing to do with where I purchased it. I did not contact the store as they did not design the machine. I did NOT want to pay for service on a poorly designed product...

I purchased an OTH microwave model #WMH1163XVQ-1 around 12/2011 from Lowe’s. Within a year, the paint started peeling inside of the microwave on the bottom. A few weeks ago, I noticed flames in the microwave and realized it wasnt my food but the microwave itself was on fire. Im glad I was close by to immediately turn it off. I hate to think what would have happened otherwise. Does anyone have any idea of what I can do about this? Would this still be under warranty? This is the first and last Whirlpool product Ill be purchasing.

I purchased a home that came with Whirlpool appliances. I begged the company for GE or Maytag. Of course they went with the cheapest they could find. I must admit the microwave gets very hot but the dishwasher is a piece of crap! The water doesnt get hot and the dryer doesnt work. They tried to tell me it NEEDED Jet-Dry. I own 4 homes and have lived in all of them. Ive NEVER used Jet-Dry and all the others work perfectly. Run as far as you can from Whirlpool!

I purchased a Whirlpool Washer at Lowes on 02/29/16. After 3 weeks it simply stopped after the last rinse, never drained the water or starting the spin circle. One and a half month later after 5 service calls still no working washer. Whirlpool customer service just adds insult to injury. They refuse to replace to washer or to issue a refund. Apparently they dont care if their customers have to use a laundromat indefinitely after buying one of their washers.

I should have read reviews prior to purchasing the Washer and Dryer. The washer sucks big time. Does not clean clothes. Leaves soap in clothes. The repair man said use 2 tbsps. of soap. Still soap in clothes. I use 1 tablespoon of HE soap. 2 1/2 hours for 1 load because I have to use deep water and extra rinse on first wash. Then I wash again with no soap. I HATE this washer. Whites are now yellow after washing. Cannot do lightweight comforters. I am at the laundry mat more than using my new washing machine. Dryer is ok but does not remove any lint from clothes or towels. I always trusted Whirlpool. Not anymore.

We purchased this refrigerator towards the end of 2008. The entire interior of the refrigerator is imploding. The plastic Whirlpool used to frame the glass shelves is cracking and shards are falling off. There are 3 drawers; one has already fallen because the plastic sliders the drawer moves along has disintegrated. We noticed the small hairline cracks appearing some time ago but never thought they would go to this extreme. Apparently the plastic used cannot stand up to cold temperatures.I contacted Whirlpools chat and was told that the product is out of warranty and I need to place a service call to get new parts. I proceeded to email the CEO of Whirlpool, Mr. Fettig because I dont believe I should have to pay for a service call when its a manufacturing problem. I received a call the day after and was told the same thing; that they are sorry we are experiencing a problem but the warranty only covers the first year. I was told that if there was a problem with the plastic being inferior that they should have cracked in the first year. I responded that the cracks may have been occurring early on in the back of the refrigerator which is the coldest part but were noticeable.Its very frustrating because a refrigerator purchase is expensive and not something that I planned on doing a mere 5 years later. I believe that Whirlpool at the very least could have shown goodwill towards their customers and given at least some discount on the replacement parts or at the very least a certificate with an amount off toward the purchase of a new refrigerator. Its a win-win situation for everyone because the customer is still happy with their Whirlpool refrigerator and/or it guarantees repeat business for Whirlpool. Apparently Whirlpool doesnt care about keeping customers happy and want and/or need repeat business. Its the last Whirlpool I will ever purchase!!!

Our washing machine - as part of a stackable set - is two weeks beyond the one year warranty. Washer breaks down, I order the replacement part to find out - after waiting two months for the part - that the washer is now being discontinued so the ETA on the part is NEVER. Ask what Whirlpool will do about this and am advised that they will offer me a discount on a washing machine that does not fit on the stackable dryer. Or I can purchase a new washing machine at more than the original cost of the stackable set.This is a totally unacceptable situation. The washer is just out of the one year warranty period and it is already being discontinued??? Is Whirlpool making disposable appliances now so that after the one year warranty we just toss the appliance in landfill? Really? Unable even to purchase replacement parts to repair a one year old appliance? I will think long and hard about ever purchasing another Whirlpool appliance again.

I bought a Whirlpool refrigerator because it was the lowest priced model that offered a bottom freezer compartment and fit into our available space in the kitchen. We also want a white coloured appliance. One thing we never noticed until set up at home was that there were no ice making trays nor an ice bin. We have had the fridge for five years with no problems. It is quite noisy when running.

A few weeks after we bought it, the washer was already having issues spinning out, and the clothes would have to go through another rinse and spin cycle. A bout a year and a half in and I had to replace the pump because it stopped draining. Even carefully loading the machine, and at least two or three times a week it would not spin out. Two weeks ago it stopped agitating actually performing washing action and spinning out all together. Last night I replaced the actuator which controls the speed or lack thereof in the spin. Still nothing. Ive reset it multiple times, still nothing. At least the clothes are getting wet. At tax return time I am replacing this piece if garbage and I will never get another whirlpool, or Maytag washer again because from what I have been told by dealers and repair men; they are all garbage.

I installed this Whirlpool Gold Series oven in December just before Christmas. I cooked a 9lbs Turkey for over 4hrs at 350 degrees (it should have only taken 21/2 hrs at 325) used a thermometer to test the temp. Well the breast part was fine but later in the evening I removed the entire turkey only to find that the legs, thighs and bottom of the turkey was still RAW. Lucky no one had asked for that part of the turkey. Next I tried a small prime rib roast. Same thing happened. The top of the roast was fine and the bottom was RAW. I dont dare cook anything in the oven now. Called whirlpool and they are going to send someone to look at it but I wont hold my breath for any results. After reading the same complaint on several reviews and the TV show Marketplace it seems to be pretty standard for this product.

I bought a Whirlpool gold model #GB2F-1DXW507 / k27711376 when we remodeled our kitchen in October 2012. After a couple months I noticed water on my floor, then in the bottom of the freezer. I called Lowe’s. They sent out a repairman. He said it was a flaw in the design and put the redesigned part in. When they delivered the fridge they changed the door to a left hand open and it was never right. After 2 years the ice maker stopped working. I just started buying ice. Today 5 years and 5 months later they said it will cost me almost $500.00 to fix the electric board and the Ice maker. The fridge stopped working would not get cold. And the certified Whirlpool repairman said it was a very good looking fridge and he would fix it with a 90 day warranty on the genuine Whirlpool parts for almost $500.00. I said I wasnt a idiot. Why would I spend that kind of money for JUNK. After reading some reviews I think Whirlpool knows just what junk they are selling. I called and all they said was, “Thats too bad. We will take it under advisement.” I bought mine 1st then 1 year later my sister and sister-in-law bought theirs. 3 fridges with all the same leaking issues. I hope they dont end up with all the same problems.

Like hundreds of others, my Whirlpool double wall ovens circuit board stopped working after 5-7 years. Accubake s-xt3704215 m-rbd275prb00 Whirlpool double oven. If it is happening to all these people, the protectors of the US consumer need to do just that!

After only 3 years using my Whirlpool front loading washing machine the inner tub is already broken. The repairman said the cost is just about the same as getting a new washer. After reading all the horrible reviews on the Whirlpool washer I WILL NOT be getting a Whirlpool. I am so disappointed in the washer and do not recommend it to anybody. Do not buy a Whirlpool appliance ever.

Thermocouple failure on a Whirlpool water heater - We are having trouble finding the part to replace it because the thermocouple is threaded left-handed, and Lowes does not seem to have any replacements in stock locally. Meanwhile my tenants are without hot water, and my repair bill is escalating due to labor.

We remodeled our kitchen and my wife liked Whirlpool, I didnt, but I went with her since she got a good deal with Lowes. We bought a microwave, dishwasher, stove, and fridge. I cant wait till all of it craps out! Going back to Sears! In less than a year I have replaced the stove and stove, the fridge sucks. The fridge already had a defect with a water leak, damaged my hardwood floors!!!! Still waiting on Whirlpool for my floors. The dishwasher never cleans, it always stinks. The stove does not self clean, the handles dont stay tight, shall I go on!

I purchased 3 appliances (microwave, stove, and dishwasher) on 10/22/10 when they were on sale at Sears for my soon to be remodeled kitchen. I did not have them delivered until 11/15/10 until contractor was getting ready for them. They still were not installed immediately. On 11/17/11, in the evening, the microwave stopped working. I called Whirlpool on 11/18/11 for service. Whirlpool will not honor the 1-year warranty since technically I bought them in October 2010 but did not even have them installed in my home for use until the end of November or beginning of December 2010. Common sense tells me the company should honor the warranty. Are products being made today to last less than a year before they go bad? To pay for a service call and parts, I can buy a new microwave (but you can bet it wont be Whirlpool).

This dishwasher is noisy, it does not get the dishes clean, and anything that is remotely lightweight gets thrown all over. This must be one of Whirlpools cheapest models as I have had other Whirlpool products and they were fine.

Looked for the best refrig we could find and it turned out to be a piece of junk! Less than 3 years old, paid 2700$, french doors bottom door freezer. It started making a lot of noise it seem to be coming from freezer. Called Whirlpool, they said to clean coils. We wanted a repair company to come out. They set an appointment for next Tuesday between 12pm and 5pm. Said ok.Was making so much noise, and no longer freezing everything so call said company. Lady was very rude, and said they would not be out on Tuesday but sometime the following week. This would not work for us so called another repair shop, said they would be out. They were here before 6pm. Found out that they have been having this problem, had same type of call already this week. Repair for this problem would be over $1100.00. No thank you! Would just as soon junk this appliance. So very sorry we wasted our money on this.

I purchased this heater in 2009. I have had so much problems with the pilot staying lit or the thermocouple. Had to have that changed, have to clean under heater monthly. I have called Whirlpool numerous times because the pilot light goes out. Now I have a problem with it staying lit. Whirlpool tells me I have to pay for service labor. They sent out a technician who broke the igniter and I am being told I have to pay labor cost to have this fixed. THEIR TECHNICIAN BROKE THE IGNITER BUT THEY WANT ME TO PAY THE LABOR COST TO FIX WHAT HE BROKE. I have had it with Whirlpool. This heater is a piece of garbage as far as I am concerned. I am tired of having no hot water.

Amongst all other items listed in these reviews (especially the tangling and twisting of clothes literally into knots), my guess is that is one way to ensure they are drier when they come out, wring them into knots... So now the pizza is slinging grease/oil all over the floor and water is leaking out from the bottom as well to make a perfect conglomeration of ** all over my tile. There is always more than one way to take care of the employees, hire sales people full of **, and technicians who know what the hell to do to fix it, with previous full of ** sales experience so consumers can buy more Whirlpool parts...

Whirlpool Duet - they are highly rated and are aesthetically pleasing. Highly rated, they are expensive, my last Duet w/d didnt last as long as expected. Ive had to repair both machines once since I purchased them. Good quality is of utmost importance, plenty of washing and drying options, front loading washing machine, full size extra large capacity, attractive machines, good reputation for quality and lack of repairs.

Whirlpool makes a quality product. My gas range is 25 years old and it still performs like new. I’ve never had to have it repaired and it is used daily. If and when the time comes that I need or want to replace it, I will not consider any other brand.

I had purchased a hot water heater on Saturday and installed it myself. I filled the tank and waited about twenty minutes before turning the power on. I waited a couple of hours before testing the water temperature and it was cold. I checked the temperature setting and it was set at one twenty five, I went to Lowes and informed the service person and was told there was nothing they could do about it, I had to call the number on the tank for Whirlpool. I called the number and was told they could come out to check it but we would be responsible for the labor charges. I didnt understand why because it was under warranty and we had also purchased the extended warranty. I informed my wife so she could deal with Whirlpool because I was going to work. My wife called a number of times and was getting transferred from one person to another and getting no help at all. She was told by one person that it was maybe a problem with the wiring in our home or maybe the plumbing. One person told her that it was not their problem. We had to finally pay an electrician to come out to look at it and had to pay him to replace a heating element. The cost of the electrician and the part came to an extra two seventy five dollars. The only real help that we received was from Lowes managers that were willing to take the water heater back if we could get an authorization number to return the water which Whirlpool claimed they did not have any type of a number. Our 400 dollar water heater turned into an almost 700 dollar water heater. We had also purchased a refrigerator from Lowes that was the Whirlpool brand that quit working after about four months and we had to pay to have it fixed. Needless to say, we will never again purchase any Whirlpool products or recommend them to anyone. The service was very very poor and we are not happy with Whirlpool.

I purchased a Whirlpool Water Heater Model # ND50T122-403 on March 4, 2011 from Lowes. I had it installed by Lowes and it included a 12 YEAR Manufacturers (WHIRLPOOL) WARRANTY, plus I purchased an additional 11 YEAR EPP (Extended Protection Plan) WARRANTY. About 3 weeks ago I had no hot water so I went down to my basement to check the water heater and it displayed 7 single blinks followed by a 3 second pause, which is a flammable vapor sensor lock-out code. I made sure there was no flammable vapor in the area, turned off the gas and pulled out the plug then called Lowes since I have an active warranty with them. They said I had to wait 3 business days for them to call back to set-up an appointment to have it repaired. I waited 3 business days including the weekend and no one called me back by the end of the 3 business days, so I called Lowes back and they set-up an appointment for a video store owner with a plumbing license to come over and try to fix it. Finally I thought I would have hot water after over 2 weeks without it, but the plumber started taking it apart and about an hour later said he needed to order a part and he would be back another day when he gets the part. He came back 2 days later to install the part and fix it, but he could not fix it. He called Whirlpool to report the issue and Whirlpool told him they would not honor the warranty because my basement was not safe. He then told me he would call Lowes to let them know about Whirlpools position and call me back. So when he called me back he said Lowes said the current warranty was under Whirlpool and their warranty was only effective after the initial 12 year manufacturers warranty was up, so they would not help any further. So after only 4 1/2 years with a 12 year manufacturers warranty and an additional 11 year extended protection warranty that I purchased from Lowes, Whirlpool will not honor the warranty that came with this water heater. I am going to take this to small claims court. Whirlpool and Lowes have terrible customer service policies. I will NEVER purchase another Whirlpool product and I will NEVER again shop at Lowes. Please do NOT EVER buy a Whirlpool water heater! TAKE YOUR CLAIM TO SMALL CLAIMS COURT FOR SATISFACTION! Maybe an attorney will put in another class action suit against Whirlpool and/or Lowes.

This microwave came with the apartment. Its the 2nd one we have had. The first one failed in our 3rd year here. We dont use all the functions, but what we have used, it works fine. Would I purchase this brand, no. I would choose GE, or Panasonic.

I stumbled across this page on another mission and had to stop to add my exp. Perhaps I got lucky and got a good set but Im on my 3rd year and my washer and dryer are my friends. I dont have hot water connected to my washer and my husband is a shingle roofer so I often have to wash his clothes twice but my dogs beds come out beautiful and the sanitizer on the dryer removes odors very well. My water bill went down, I can wash my rugs and large comforters at home now. Plus they are so pretty. Im sorry you are all having so much trouble but I love mine sooo much I just had to stop a moment to throw in a little positive.

Whirlpool slide in range, microwave, dishwasher, KitchenAid fridge: All appliances, stainless finish, were bought with my home in October 2006. Range - Within the first year, I had problems with the outer plastic pieces breaking, the motherboard and the oven and broiler not working. The screws holding the knobs on fell out several times. The oven door was fixed several times this past year until finally it fell off and broke for good and now the oven does not work at all. Microwave - The rotisserie motor stopped working this past year. Dishwasher - Just after the first year, the outer shell of the door came apart. KitchenAid fridge - Within the first year, the temperature adjuster broke. The second year, the ice maker stopped working. This year, the ice maker broke again and the motor quit working twice already and all has been repaired. The freezer handle has fallen off as well.

Today I had the unfortunate experience to have to deal with Whirlpool customer service and claims. I WILL NEVER BUY ANOTHER WHIRLPOOL PRODUCT again! My refrigerator, that was purchased in 2013, has a door misalignment problem. It is a known problem with Whirlpool (service pointer W107317828). My refrigerator serial number and model number are affected. Because I am outside the one year warranty, Whirlpool refuses to provide service that is required to fix this known issue with my model/serial number. After having to talk to four supervisors the only resolution that was given was that they would cover the cost of the 7/16 hex nut ($4.33). Dont get me wrong I do appreciate the offer.The two supervisors that were below her assured me that no one can do anything to assist me further. The attitude of the second and third supervisor was pathetic. After over a hour on the phone I was so disappointed that I could not take it further. The cost that we are talking about that I am asking them to pay is $154.28. I am very disappointed. They say they stand by their product. To me standing by your product means that you will fix or replace any known issue. $154.28. I hope it is worth it to you Whirlpool. You lost a long time customer.

The most horrible stove I’ve ever owned. The self cleaning oven never worked, the oven whistles while warming, the alert stops working after a few times, there is a razor sharp hidden vent under the dash of stove on which I cut my hand when cleaning. Customer service is nonexistent. Never never never buy Whirlpool.

I purchased a brand new Whirlpool Cabrio washer and dryer set not even 2 years prior. When I first started using it, I pulled shirts out of the wash after being ran through and found deodorant marks still on the inside of the shirts. I had to wash all of my loads on heavy soil and still had to run some loads through more than once. The wash machine quit working about 1 month ago, so I had a service man out to look at it. It ended up being the control panel and the part itself was going to cost me $300 and by the time I paid to have it repaired, the total cost was just under $400. The service man proceeded to tell me that Whirlpool had another company actually make the control panels for the Cabrio model and he has serviced several of these washers and when he would repair one part, another part would stop working. I was very upset and bought a new wash machine. I would like to add, I am a single mom with a 2 1/2 year old, so the wash machine was not used excessively in any way. I dont work outside so my clothes are never soiled heavily. Needless to say, my washer was not under warranty so Whirlpool couldnt do anything for me. A wash machine should last longer than less than 2 years. I would not recommend this model to anyone. And for Whirlpool to put their name on such a poor product is very disappointing since I have had good experiences with their products in the past.

My Whirlpool dishwasher washes dishes well, when it drain but it will not drain. I purchased insurance repair service from AIG. AIG is a total rip off. I paid them over $300. I have called many many times. They promise someone will call but not one ever has. I would never work with AIG or Whirlpool ever again.

Its big enough, but the ice maker is always messing up, the shelves broke easily, the water takes forever to get cold from the indoor dispenser. The finish, which is called Satina or something like that, dents real easy. It is really a piece of **! When it was new, we had the repair man out 4 times before it was fixed. He even said it was a piece of junk and it should be lemon lawed out. Drawers broke, shelves broke, and parts are really expensive when you break one of the plastic parts.

Whirl Pool Duet Wash WFW9400SW - I had this washer for 5-1/2 years. I use it about 3 times a month. Warranty ran out this last February. Machine stopped working. Called tech and he came and said I need a new console and power board. Two weeks later I get told they dont make it anymore and sorry about your luck. I used this washer under 200 times in 5 and half years. Whirlpool offered nothing and I will never buy a Whirlpool product again.

After years, the gas hot water heater model fg1f5040t3nov went out. The plumber had me get a new part. 2-3 weeks ago, it went out again. I am trying another new igniter assembly. If it goes again, Im getting a new heater - not a Whirlpool! My plumber says he can get me a new one for a little more than I spent on the Whirlpool, and its much more dependable.

Very unhappy with my top load washing machine. I use more water. Can wash fewer clothes and clothes do not come as clean as with my older Whirlpool. This machine needs a SERIOUS AGITATOR. Will not buy another Whirlpool.

I paid $1246 for a Whirlpool glass top range. This was not a cheap model, but I wanted it as the starting point of my new kitchen. After only about a year, we noticed that the area surrounding the operation controls was turning a funny color. On closer inspection, we noticed what appeared to be something peeling off, it was paint! The area surrounding the controls, which appeared to be brushed metal, was actually painted plastic! I was furious that an appliance at this cost level was made of plastic....really, a stove top made of painted plastic? I complained and after a huge fuss they agreed to come out and replace it ONCE. Well its been just over a year since they replaced it, and guess what? It is peeling off again!I dont know what to do, as Whirlpool obviously has gone the cheap end and doesnt want to fix problems. As others have mentioned, they say that it is JUST cosmetic, and they wont cover it under warranty...now my first new appliance for my first new kitchen since 1972 looks like crap! I should have kept my old avocado green appliances - they lasted over 40 years, still worked, and still looked good (except they were green). I wont ever buy another Whirlpool appliance. For those who mentioned that their appliance would turn on unexpectedly, please check recalls....this is one of the major problems on recall. Buyer beware!!!!

We purchased Whirlpool dishwasher Model #GU3200XTXB Nov. 2011. Two weeks later they replaced the soap/rinse aid dispenser because the rinse aid was running out the bottom of the dispenser. Feb. 2012 they replaced the handle which was loose. July 2012 the panel lights werent working and that was replaced. Feb. 2014 the soap dispenser door would not open, so the dispenser was replaced again. March 2014 the soap door would not open again so the computer board was replaced & the door did open. However, it stopped again 3 days later. April 2014 the dispenser and the board were both replaced. The rinse aid dispenser did not dispense leaving the inside with moisture on everything. So yesterday the dispenser was again replaced but now the rinse aid is running out the bottom of the dispenser. Thank goodness we purchased an extended warranty for $169 or we would have spent more than $1,000 on repairs!! The warranty company refuses to acknowledge that their lemon law should apply. There are 2 of us and we use it 2/3 times weekly.

After a days work Old Grumpy around 7:00 PM drags to sink, fills pan with hot water & soap; starts scrubbing forks, spoons & occasional cereal bowl. I prewash everything placing it in the dishwasher, it takes it a week to reach 3/4 full: use for sanitation.

I bought a washer and dryer a couple months ago. The washer has been completely replaced already. It is a piece of garbage. I have to wash my laundry four times and still my clothes are not coming out clean. I have three small children and it is just a pain to always be washing their clothes. Things as simple as orange juice not coming out of a shirt even using bleach. It was sold to me with high efficiency and great water consumption but of course it is, it doesnt use any water to wash the clothes. I had a tech come out to look at it and even they said its had so many complaints about how it washes. She said that the wash machine is the worst out there and I totally agree. If you cant wash baby clothes and get puke out of a bed sheet then I could just imagine grass stains. Wash machines don’t last forever but I can promise you I will never purchase another in my life. Best part of it is when whirlpool was approached, did absolutely nothing about. Basically said, “Have a good day, thats what you bought, thats what you get.” Considering its still under a year warranty. Tell me I will never buy a whirlpool again and I will never recommend one to anyone who asks. The customer service and product dont stand anything against other manufactures. I learned my lesson the hard way but Ive opened my eyes. Never purchase a top loader. Word of mouth travels fast. I know my complaint probably means ** to whirlpool but for what its worth, Ill be spreading the word around.

Cabrio washer and dryer are not energy saver by any means! Have had the pair for almost 1 year and have spent at least 3 years of washing and drying time with these. What use to take 30 minutes to wash now takes at least 48 or more and the dryer has to be run twice on lots of loads to dry! The other thing is, with no water in the tub it really does not have a soak cycle to get really dirty stuff clean, so you wash things 2 or 3 times! Now I know why I see these washers and dryers like new in the used stores for $200 to $300. Thanks for the junk Whirlpool.

Very reliable and cleans clothes very well. I have used almost every machine on the market, and none compare. Very quiet and I use very little detergent and CLOTHES come out very clean every time. I am just very satisfied with my experience.

I owned a Maytag washer for 30 wonderful years, so I of course bought a new one. I have battled with my Maytag (Whirlpool) front loading stackable top of the line washing machine for 2 1/2 years. It will not drain, yet sometimes it will. I have played every game with this machine to figure why. I had a repair company out 5 times while it was under warranty and they could never find the problem. It is totally unpredictable. If I could bill Whirlpool for my time and anguish I would own this company!They now say it is the computer board and I will have to pay $350 for a new service contract to fix the machine. I not very politely said that they should pay me for all my emotional abuse. They offered me another option saying they would pay for a service company to come out and look again. However, I would have to pay the labor and material cost. Since I have a stackable unit and it would take 2 technicians I would have to pay $90 for the second person. I was so mad that I called Whirlpool back and they refused to offer me that $350 charge and just said sorry. I are fortunate to have a lake house which needs a new washer. Guess what? It will NOT be a Whirlpool product. I wish I could go to the store where I purchased this holy terror and picket!

In August of 2013 the lid on my Whirlpool Cabrio, model #WTW7800XW0 simply fell apart. This washer was purchased from Lowe’s in Live Oak, Florida on August 23, 2010. Lowe’s put me in contact with the authorized repair service, A&E Factory Service. The A&E technician arrived and told me the hinges were the cause of the lid breaking apart. He ordered a new lid and new hinges. When the lid and hinges were delivered the technician came back to my home and looked at the hinges again and said they didnt look that bad so he didnt bother even opening the box with the new hinges. He just put the new lid on and said I shouldnt have any further problem. The total cost of the new lid, hinges and service call amounted to $385.50. Well, here it is - not even a year later and the same problem is back with me. Yesterday (July 23, 2014) I was doing a load of laundry. When the load was complete and the lid lock turned off - the lid actually sprung upward and now the lid wont close. It seems that Whirlpool is fully aware they either have a design flaw of defective lids and they are gouging the customers for their errors. The Cabrio model is supposed to be top of the line - certainly not a cheap machine. I was, at least, happy with the performance of this machine cleaning my clothes properly but this lid problem is ridiculous. I do not plan to purchase any Whirlpool products in the future if they do not make things right by myself and hundreds of others with this same problem.

I purchased a Whirlpool refrigerator in 2012 and now it does not work and Whirlpool says a 1300.00 refrigerator only has a one year warranty. Please do not purchase a Whirlpool brand because they do not live up to their brand name.

The oven will not turn off. When I called Whirlpool and told them what had happened they immediately put me in contact with the safety division. My question is if it is a safety issue, why is there not a recall and why do I have to pay for the circuit board. If there is a safety issue why is there not a recall.

If 0 stars was an option, I would have chosen that. Ive had my own home for 34 years and have had many washing machines over the years. My Whirlpool Cabrio is absolutely the worst washer I have ever encountered. It doesnt get clothes clean and constantly gets out of balance. Whirlpool did a service call and said it is functioning as designed so I was unable to get a replacement. I really hate being wasteful and adding a huge appliance to a landfill but I will be replacing this machine as soon as it fits into my budget. I dont have a receipt to submit because it was purchased by my builder at my request. Do not buy this machine!

Whirlpool Gas Range model GW397LXUB1 is a lemon. We bought our house new in 2008, and it came with Whirlpool Gold package appliances. Within a year, the console buttons quit working for the oven, and we had our warranty fix the console. Within another year, it happened again, and then again last November and now again this week. This range is obviously defective, yet the only solution was to buy for $350, a one-year warranty from Whirlpool. I asked if they had any sort of redress or rebate if we bought another unit, which they reported no. So I looked online for other people who have had similar issues, and counted at least 75. So this company knows they sold defective units, but wont stand behind them without substantial cost. All this simply assures me is that Whirlpool is NOT a stand-up company, and I can assure you that Ill never purchase any product from them again.

Bought this machine in Feb 2007 as a pair Whirlpool Cabrio. I loved it for almost two years. The control board went out, Whirlpool replaced it. A couple of weeks later, the F-1 codes started then the F-51 codes. On July of 10, it was code after code. It sounded like a jet taking off and constant unbalanced load. I called repairman and was told to go buy new machine as repairs would start at $500 and since I live in a rural area, no one wanted to waste their time. Two repair techs told me point blank they wouldnt even touch it. We paid $1000 for this machine and we live pay check to pay check. I spent four months trying to get Whirlpool to do something. I kept getting told I should have bought extended warranty. Machine has been sitting under stairs for over year waiting to see if class action or recall can be done. Also when control board was replaced, the repair man told me it was rusting away from the inside out. My husband had to find us a used washer and this thing has done nothing but cost us money. So much for efficiency. Everyone posting here also needs to go to Whirlpools Facebook page and post there.

We purchased a Whirlpool Duet front load washing machine Model #WFW9550WL in July 2009. In July 2016, the guide on the door hinge broke, making the machine unusable. When performing a national search for the part number (#8183202) to replace the broken hinge, I found that there were none available anywhere in the United States. When talking to Whirlpool, they indicated that during 2015, they only sold 142 of this part, and were currently looking for a new manufacturer for the part. They further indicated that the part would not be available until late September or early October of this year.

I bought the Whirlpool Cabrio washer and dryer combo with max load capacity for comforters. This is the biggest set of junk ever. Where to start? There are so many issues, starting with the fact that nothing comes clean, no matter if I even put one small item in it at a time! The fabric softener dispenser is a joke. It runs straight through into your unwashed clothes before the cycle even begins. The dryer never gets the clothes dry on the first cycle. I find that I will rewash the same load of laundry 2 or 3 times and still not be clean and then dry same load 2 or 3 times. I wish Whirlpool had these shoved up their **! Never again will I buy anything by Whirlpool!

I would not buy any Honeywell electronic water heater thermostat. Has failed two times. I have to pay for a new one to be mailed and for repair. A bad product from all the reviews. Honeywell is claiming they do not service it anymore and gave me a Sears telephone number. Servicemen have said it is a crap product and fails all the time.

I purchased a Whirlpool washer in 2010. It has started to rust. I called the customer services dept. They told me that there was nothing they could do about it because it was over a year old. I asked to be transferred to a supervisor. She told me the same thing. I told her that its not as if Im looking for a new washer. She said that there was nothing they could do; I had to pay for the repairs myself. I told her, After spending almost $1,000 on a washer, I have to pay for the repairs? She said, Yes, maam. I asked if I could speak to someone over her. She said that she had to take down my name and number and someone would call me back in 24 hrs ... from the management team.She asked for my number and not my name and said someone would be calling back. I told her, How are you going to forward the message without a name? Maam, Im sorry. Whats your name? I doubt if anyone will be calling me back. Whirlpool customer service sucks! They dont know how to treat their customers. Watch out for the warranty. What they call a warranty is not.

This Whirlpool dishwasher is the worst dishwasher I have had in 45 years of using dishwashers. I have bought dishwashers, but now rent and so am stuck with this one. Initially, I complained to the landlord about the dishwasher not getting the dishes clean, so the repairman came and recommend replacement. Unfortunately, it was replaced with the same brand. The new one didnt wash any better than the old one so I pre-rinsed everything and the dishes still come out with sprayed dried food on them. The spray holes in the arms fill with food no matter how thoroughly I rinse the dishes. The silverware in the door rarely is clean. The filter is always coated with food particles. The top shelf is always worse than the bottom shelf. I have used inexpensive GEs before and nothing compares to the poor quality of the whirlpool.

My Whirlpool Cabrio Washer is a bucket of junk. I bought the washer in about 2008. I was smart and bought the warranty for approximately 3 years. Since I bought it, I have had them replace 3 water pumps, the tub, the computer, and it still knocks and shakes. It also leaves small frayed holes in my beach towels. This machine should be recalled. It needed a warranty from day one. Washer cost $1,000 warranty every year $130.00 per year which covered the repairs at about $900.00 for repairs. I hate it. I just hate it. I can’t stand it anymore. I need a new washer, someone has got to listen.

We have had every issue with our Cabrio model 6600 SB2 that Kimber of Salem, VA has had. Thankfully, we purchased an extended warranty at time of purchase(1-31-07) from Lowes or repair costs would have totaled more that the price of the washer, which was $900.00.It is now making a loud noise during spin cycle that sounds like a bearing going out. It is 1 month from being out of the 4 year extended warranty and today, 12-26-11, the repairman has told me that the washer needs to be rebuilt. The washer itself, does not clean that well and the clothes are so wrinkled when they come out, that the dryer cannot get the wrinkles out, so everything needs to be ironed. What a pain!We bought this washer because Consumer Reports magazine listed it as a best buy. This is not the first recommendation Ive chosen because of their magazine that I was disappointed with. I have lost faith in them. I would not recommend this washer to anyone. The matching dryer, however, has been trouble free.

When my wife and I were planning our retirement, we made a to-do list before we officially stopped working. We are loyal Whirlpool users and over the next 3 years we purchased 4 major Whirlpool appliances in preparation of having 8-12 years of problem-free time as we go from a two-income working family to two people on fixed incomes. I retired in December of 2011 and unfortunately this did not pan out on 2 of the 4 appliances. The washing machine, in late February 2012, blew a transmission 23 months after purchase and 11 months after the warranty expired. Discussions with Whirlpool by phone were unsuccessful in getting the repair covered.Ultimately, this repair cost us $265.00. In late April, 9 months after the warranty expired, the refrigerator iced up and had to be manually defrosted, despite being equipped with ADS. My family and I did the defrosting because it was a weekend and tech support was not available. On Monday, the refrigerator was functioning, so I was told to run it and see what happens and call the tech if it happens again. I had done research online and found many folks were having trouble with this refrigerator model and the main problem was the control board”, a board that is used in many Whirlpool refrigerators. I ordered one after the initial problem and waited for it to ice up again. On Sunday, May 20, it repeated the same symptoms displayed and I put the board in myself and it solved the problem. This computer board cost me $95.81.I contacted Whirlpool about the two premature, post-warranty expiration issues in hopes of getting some reimbursement for the repairs. The Whirlpool rep told me that because there had not been a recall on either appliance, they could not reimburse me. They instead offered me a 6-month extension on the dishwasher I bought last July. I have been on several complaint websites and have seen the refrigerator control board repeatedly mentioned - all within the approximate 2-year timeline as my control board failed. My refrigerator was a GB9FHDXWQ01 model, but the control board is used in many of their refrigerators. If this has happened to you, please contact me at ** and, hopefully, together we can get enough data to get a recall and get proper treatment from Whirlpool. Please include your refrigerator’s model number so I can verify the board is the one in question. Thanks.

On November 22, 2013 I loaded my Whirlpool Quiet Partner III dishwasher and set it to start. About a minute later I heard an odd noise coming from the machine. I went over to take a look and saw black smoke and flames coming from the little vent area at the lower right corner of the control panel. I opened the door to stop the machine but the washer kept going throwing water all over the floor. I shut the door and ran and turned off the breaker and then unplugged the cord from under the sink. Two different repair service companies said they would be hesitant to try and repair it due to possible unseen damages. I was lucky that I was home when it happened. I could have lost my house to a fire. There is a large consumer lawsuit already in play regarding this very thing.