I purchased a Whirlpool catnip washer from Brandsmart in August of 2010. It worked fairly well, but would sometimes need for clothes to be rearranged in order for the spin cycle to complete. In June of 2013, it started to not wring the clothes out completely. It then stopped working. I called a repairman and got an estimate of $550 dollars, but I paid $578 for it.I called Whirlpool and spoke to the supervisor of the consumer concern team. She offered me a fifty percent discount on the parts for the repair. I checked the web to see if anyone else had any problems with this product and found several. I suggest you do your homework before purchasing a Whirlpool washer. I was positive they would do more, since it’s such a prestigious company.

This washer has been a lemon since the day we bought it. Always leaves marks all over dark clothes. Had to have a part replaced before we owned it a year & repairman from the company said they have to replace that same part every time they go out so they carry them on the truck. Latch broke after owning it for less than 2 years & now it no longer spins water out of clothes. All this & we havent even owned it 3 years. I had a GE washer for years when I first got married & had children. Never had problems like this. Paid it off on Monday & on Friday it became a piece of junk. How is Whirlpool getting away with this misrepresentation? I dont even see how they can call it a washer.

Do not buy anything Whirlpool makes. I purchased a new home and new appliances. In less than 4 years motor is gone in dishwasher. 6 weeks later I have another leak that has ruined my hardwood floors. My fridge is making all sorts of weird noises and alarm is going off. They are coming to ‘look’ tomorrow. And my washing machine is no longer draining. Whichever you buy from check how the extended warranty works... Trail Appliances Calgary uses a company that is horrific to work with, doesnt have a human to talk to and wont acknowledge you unless you pay $149 upfront. RUN AWAY!!!

My family has been without hot water for two weeks. We have the same water heater, we have been to Lowes where we were told the recalled parts were no longer available, unless we wanted to drive 3 1/2 hours to Arkansas to get it. Whirlpool wants to give me a free part for $36.00 worth of shipping and handling! All the local suppliers say I have to go through Lowes, or the manufacturer. I dont want to give whirlpool another dime. This has been a fiasco. How much more can a company disrespect their customer, than to make us pay for a faulty product replacement? It is unacceptable. This is ridiculous. It is December, and I have a family of 7, including a child in a wheelchair.

My 4- to 5-year-old Whirlpool Cabrio 6300 began to display errors recently. F1 was the 1st error code I encountered. After giving the washer a hard shove and rocking, it began to work properly again... for a while. I noticed on some large loads that I was getting an LD Long Drain error. I could hear the pump running but with little water flow. Eventually, it would time out and give the LD error. A service tech was called and determined that the water pump was defective, although the impellers inside appeared okay and had no foreign objects to impede its spinning. After spending $225 for the service call, the LD error resurfaced about an hour after the tech left. Tonight I got the F1 error again, and once again the washer responded to a sharp rap. The replacement control board, which the F1 error code involves, is $220 plus labor. $440+ for a repair to a $600-$700 washer? Im going to dissect the main control board tomorrow and look for loose or corroded connections. I cant understand why the LD code occurs when I can hear the drain pump running... just very little comes out. Other times it empties like Niagara falls... I cant understand why it works sometimes and fails others. The pump is either on or off. It doesnt have multiple speeds as far as I know. Im not sure what to do next... probably try to re-sell the new pump that was installed to recoup some of the money I paid for a non-working Cabrio. This seems to be a very common occurrence.. Have any class action suits been mentioned? If so, please feel free to contact me.

After careful research, I purchased a Whirlpool microwave 2 years ago. Model WMH2175XVT-2. It looks brand new. Three months after the extended warranty expired, my microwave wont heat anything. Ive tried all the suggested troubleshooting in the manual. When I called Whirlpool (the number right inside the microwave door) I get a recording that asks me if it has been more than a year since my purchase. I can only say yes because even the extended warranty with Sears had expired by three months. Then Im directed by the auto-operator to schedule a repair service. Im fuming and seeing dollar signs and no human to talk to, so I hung up. I googled my problem and was asked to pay $50 by an online repairman, so I clicked out of that window not wanting to sink more money into a bad purchase. Then I found a website from a consumer saying the Whirlpool Company admitted it was a bad magnetron with this model and that they have had a lot of problems. They should have recalled this microwave model or offered to repair or replace it for free. I have just decided that I will no longer purchase Whirlpool products. As soon as my oven and dishwasher die I think Im going back to Kenmore products.

I purchased whirlpool Model# WFG540H0ES gas with convection. I purchased it because the price was $1000 dollars less than comparable ovens and even now the price has gone up $300 since I purchased it. I really wanted the luxe look at a discount price, a burner that you could lay a grill over, and five burners which it provided all of those things. I hesitated to buy this oven because the door fell off the last Whirlpool within three years and they refused to fix it so I tried not to buy this brand but it had the amenities I wanted for the price I could afford. I really like the oven. I like the oven the best because it really does make a great cake. I like the two large grates that sit across the oven. It makes it feel high end. If you dont wipe the range immediately grease gets stuck on the range and is hard to clean. This is what I like the least. Im ready to wipe on the weekend and its too late. It took me four days of internet comparison to decide on this one. The house is not painted, the cabinets are falling off the wall literally but I am extremely proud of this oven and it makes me feel affluent even though Im not.

So I had a problem with the water heater after 2 years and had the sensor fix by my heating people. Now the water heater is 3 years old and started leaking from the top of the water heater. Called my heating people and they fix the pipe and coupling on top but he told me the water was still bubbling up at the top. He told me it could stop and 70% it would be ok. Went to check on it and it continues to leak so I called Whirlpool because it was still under warranty. They are the most horrible people to deal with. First of all I told the guy it was leaking from the top but he asked me if it was leaking out of the side pipe. Didnt know what he was talking about and he kept sighing on the phone. If I knew about water heaters I wouldnt be calling them. After all the questions it came down to it was leaking where I told him at the top. He gave me a number and told me to take the water heater back to Lowes and get a new one and then call them and they would move the warranty over to the new heater. Really???? We are not talking about clothes you want to bring back to a store. Asked him how I should do this and he told me to call a heating contractor. So does he think that the heating contractor and going to run the water heater back for a new one??? In the end I just called my heating people and they are going to send somebody out to install a new heater. So much for Whirlpools warranty. If this is under warranty and it is exclusive to Lowes then they should be having Lowes bring a new one and install it.

I paid over $1,000.00 for a washer based upon previous experience with Whirlpool appliances. I am single, over 65, and use this machine infrequently, as compared to when I had children. The only thing Whirlpool is offering is another of their machines at a discounted price. I value principles more than dollars. I refuse to give them another $600+ as a reward for making junk which apparently should have been recalled. The part I need is not available any place Ive found online. And it completely controls the power to the machine. You cannot open the door, you cannot turn it on. I had two service calls to discover this part is not available.

I received this Email from the Whirlpool Director of Consumer Care to evaluate my experience with their customer service department. I filled out the survey over a week ago including a complete documentation of my problems and have not even received an acknowledgment of the survey or promise to look into my problems.In the last 7 months I have experienced problems with 2 Whirlpool major appliances which both appear to be unrepairable and which have been unsuccessfully brought to the attention of your customer support group. In March a fridge and in October a clothes washer. Both were high end products roughly 3 to 4 years old. I did not have an extended warranty with the fridge so I dealt directly with the customer support group. However I was covered by warranty with the washer and your distributor Bad Boy have been making the calls on my behalf but have been just as disappointed to date as I was.Both cases were very similar. In both cases the repairman came out within a few days and promised to return the following week with the broken part but I have never heard from either one of them EVER. In the case of the fridge I was told to defrost it the day before the promised repair date and lost all the food $$$. At this stage a number of calls went out from me to Whirlpool for the fridge and from Bad Boy for the washer and eventually we both got a new delivery date of roughly one month. Both times the date passed with no shows and no call backs. Repeated calls later to the customer service group, with promises of EXPEDITING the delivery, the fridge part delivery date was extended to 3 months so we had no choice but to buy a new fridge. As for the washer, Bad Boy even had an unsuccessful face to face meeting with your representatives and we have had no word back or expected delivery dates well into the third month.I HAVE NO IDEA WHAT TO DO? I have made so many calls with so few call backs and no clue what to expect or when? Your representatives use the word expedite with no idea what the word means. At the suggestion of one of your representatives I even called one of your distributors Sears to see if they had the part. Their Canadian head office is in the Philippines and they said they had the same problem with Whirlpool. Twice I tried to talk with your representatives supervisor and both times were unsuccessful.In a world of computers where it should take seconds to find inventory parts and expediting packages usually refers to next day delivery, the fact Whirlpool requires months is unbelievable. The only explanations I can come up with is 1- You dont make parts for your appliances. 2- New appliances are made so poorly all parts are gone. 3- You could not care less about your customers. 4- You dont own a computer. Most of our appliances are Whirlpool because we thought you had a good reputation. We had to purchase a new fridge and still have had no word on the washer?

I had my Whirlpool electric stove for about fifteen years, I have had a couple minor problems with it. The oven temperature sensor went out, I bought a new one online and replaced it. The stove top eyes get warped from uses. Really no big deal. Ive had good luck with it over the years. Its the standard 30 inch white. I paid over $400. It will probably last me another 15 years, I dont see why it wouldnt. But then I know how to fix appliances. I think the only reason why anyone would replace a stove is because of the color or it caught fire or wont come clean. The mechanical isnt a problem because you can rebuild them so easy.

I purchased a Whirlpool 3 years ago. It was on the lower end for price so my expectations were not that high. It does an average job cleaning dishes so for the price I could give it 4/5. The pump and motor just went and had to be replaced. Almost the same cost as replacing the whole machine. The repair technician that did the work stated that this was a very common problem with Whirlpool in recent years. Of course this is not covered by warranty. So if you purchase a Whirlpool realize you are rolling the dice.

I used my self cleaning oven feature and the fuse blew, leaving my oven with no electric current. I had to replace the fuse at a cost of almost $300 two months after the one year warranty of the oven expired. The technician suggested I no longer use the self cleaning feature since it will continue to melt the fuse wire. The oven becomes too hot, so I have an oven that I paid for with a feature I cannot use. I would not recommend this product.

I purchased a GW399LXUS Whirlpool Gas Range. This is the slide in kind. I paid 1658.00 dollars for this stove, because it was a gas convection oven. We purchased it on 7/21/09. Just yesterday, the keypad numbers stopped working. I cannot even set a temperature for the oven. So now, I can only use the burners. I called Whirlpool today. They told me that my stove does not have any recalls so there is nothing they can do about it. I spoke with Jessica in Michigan. I told her how dissatisfied I was that the stove is only 2 years old and the most important part (the buttons) stopped working and they only cover this for one year. She told me that I have to remember that man made things are made to stop working at some time. I told her they should work for longer than 2 years. I remember way back when my parents bought a stove or fridge and they lasted for 15 to 20 years before breaking or stopping to work.I am a long time Whirlpool customer and always had good luck with their products. But I really feel that they should fix this problem. I could understand if the stove was 8 or 10 years old and something broke after using it, but not after 2 years. I will definitely tell everyone I know to not buy Whirlpool or Maytag since they are one in the same. I probably will not buy Whirlpool again and will have to buy something from Japan since it will last longer. So much for buying American made junk!

When we bought our side by side fridge (model GD5RVAXVB02), the manual said to clean the condenser coils if you have excess dust and/or pet hair. We have both. We tried with the vacuum and with a brush but it is impossible to get to the coils because they run side to side instead of front to back. You can only get to the first coil in front. The rest cant be accessed from the front, sides or back. I called to find out how Whirlpool recommended they be cleaned and they could only recommend a vacuum attachment tool (8171579A) to clean the floor below the coils or a coil brush (4210463RW) that cant reach the coils! This design is meant to fail prematurely. They could have easily installed the coils running front to back so they could all be easily cleaned.

My refrigerator is 6 months old and already has rust and leaks. I am told it is because I live too close to the beach. Do not buy their sub-par products which come along with absolutely awful customer service. Will never purchase anything Whirlpool again.

Im yet another angry customer who is dealing with a defective Whirlpool hot water heater purchased from Lowe’s, still under warranty, and it failed. The thermocouple appears to have failed and, amazingly, the part is nonstandard in that it screws in backwards compared to every other HW heater. Lowe’s doesnt carry the part even though they sold the HW heater. When I contacted Whirlpool, they agreed the part is under warranty and will send one, but I have to pay shipping for a minimum of $10 and a week to wait, plus having to get the part installed. Obviously, I am one of many who bought this defective appliance. Whirlpool used to be a good company, but Ill tell everyone to avoid them in the future. Meanwhile, I have no hot water and its freezing in Cincinnati.

This unit has been in operation for over 40 years. It recently developed a freon leak. Rather than repair this unit that uses out of date freon I am going to replace the unit. I have had to replace the contactor twice and had to service the condenser fan once. All in all I think I got my money's worth.

This Whirlpool Gas oven with 5 burner top is very good and has given us 12 years of good service so far. The only issue is that the stovetop and oven are not easy to clean and keep clean. The finish is good and has no chips. I would expect the top to be easier to clean and keep clean with the finish technologies available. Same for the oven window glass - it is not easy to clean and keep clean.

The water dispenser tube cracked and split off near the dispensing end, making the dispenser unusable. Not a consumer repair, by any means. Refrigerator is only a year old. I had a similar parts quality issue with a Whirlpool dishwasher. I will never purchase another Whirlpool appliance, and will advise all to avoid as well.

I bought this washing machine in May 5, 2012 and delivered in July from Paddys Market. We do not use the machine that much because me and my wife and two kids living in the house. Yesterday I put my clothes in the machine and left it to wash it. When I went to get my clothes, water was all over the place in the basement and the machine was beeping and reading code LF. I turn off the machine and turned on back. Water started to fill and then suddenly water started to coming from the bottom of the machine. I removed the bottom panel and I could see the water was coming very fast from the bottom of the basket (the drum shape). I called the private company to repair it and waiting to find out.

I bought three top of the line 40-gallon Whirlpool electric water heaters from Lowes three years ago. One of the three heaters has already developed a leak. I contacted Whirlpool only to find out that they wont do anything to diagnose the problem. I have to pay labor for someone to come out, diagnose the problem and then pay for the labor to either correct the problem or replace the water heater. By the time I pay the labor costs, I could almost buy a brand new unit.

I purchased this Maytag clothes washer in 2007. So far Ive had to purchase and replace the front door 2 times. The current one now needs replacing. The plastic near the hinges disintegrates after about 2 years. This appears to be a manufacturing design defect. I have requested from Whirlpool to send me a replacement door for my washer. The part number is 34001178. The model number is MAH2400AWW. The Serial number is 14060452LE.I have spoke to four different levels of employees at Whirlpool after escalating the service request. Each time they have told me they are unable to send a replacement door to me, stating that the product is out of warranty. I realize that the washer is out of warranty but I believe this problem is a design flaw. The plastic near the top door hinge breaks down and cracks after 2 years of normal use. The last person I spoke with Michael (would not provide me with a last name) said to write to the Whirlpool corporate office with my complaint.

Refrigerator caught fire - I own a 2003 Whirlpool Gold side-by-side refrigerator that I bought new from Lowes in 2003. On Friday, July 13, 2012, I woke up to the smell of burning wires. I called 911 and they sent out a fire engine. While waiting for the firemen to arrive, my neighbor came to help me determine where the smell was coming from. Within seconds, we heard loud clicks and a huge cloud of gray smoke came out from behind the refrigerator. The firemen arrived, entered the house, unplugged the refrigerator and told me that the smoke and smell was coming from behind the fridge.

I am questioning my loyalty because the last two Whirlpool fridges have been repair prone, and have bad design issues for ice dispensing. The dispenser door doesn’t close reliably and lets the ice maker warm up and melts the ice. This supports my rating.

Cabrio he washer wtw6400sw2 - I bought this washer about 6 years ago at the time we paid around $900. Now my bearings went bad and the repair person told me it would cost around $300 to $400 to replace the bearings and seal and shaft but that I should call Whirlpool and see if they could replace the part or give me some discount cause it is becoming an issue with all the Cabrio washers. So I called and spoke with a so called manager - as far as I know it could of been a cleaning person there. She told me that she could not do nothing about the issue. So if a lawyer would be nice to help me and the rest of the world that are having all these issues to file a suit against Whirlpool Corp.

My new ACCU-BAKE oven was not baking properly. Always uneven results. Finally called for service, just in time before the warranty expired. The service rep informed me that I had not bought a convection oven. Well, duh! Of course, I knew that! He tested the temperature levels inside the oven and found a variance of 10 degrees Celsius, which he reported by phone to the company. He advised me to reach into the oven half-way through any baking process to turn my cake around, and it would bake evenly. I asked him if he had ever tried that himself. No, he said, he was not a baker. That was the end of the service call. No follow-up, no service. Today I learned that the company actually has this exchange in its records, but if I want to get the oven to work properly Ill have to pay for service, as the warranty has expired. I wonder what would happen if I ever tried the self-clean or Sabbath mode features on this oven.

Had washers model # WTW8500DCO repaired after being install for 14 days. Have had washers repaired every 90 plus days because of constant electrical and mechanical failures. Would not ever buying another whirlpool appliance to my worst enemy. Customer service is a total failure. If you ask a question after talking with you for 5-8 minutes and they dont have an answer they start saying HELLO, HELLO? I have to hang up. I cant hear you. Just a really sad business. Stay away!

After 16 months the Whirlpool refrigerator Model number: #WRT311SZDW00 goes out. While trying to use extended warranty Whirlpool states it will be 4 to 6 week before a technician can come out. YES- Weeks not days. Now Whirlpool states they are unable to find a technician in my area and in order to get it fixed I will need to hire the tech and seek reimbursement from them for the repair. However prior to the repair they will need to approve the repair. In the mean time I am renting a refrigerator at my cost. They lost a customer for life!!! Question- What is the purpose of the warranty? Model number: #WRT311SZDW00

Best stainless steel built dishwasher we could find in this price range. Well built with lots of room and easy access to both drawers. Easy to clean filters and a nice modern look.

A few months ago our Whirlpool microwave just completely died. We had only been in our brand new home for about 18 months at the time, so I was very disappointed. I would have bought a different brand at that time, but didnt want it to look ridiculous, as it is mounted in the cabinet above the Whirlpool oven I was shocked to get a text from my wife a couple days ago, saying the same thing had happened to our oven. I thought that it must be a circuit breaker. My parents had Whirlpool appliances in my home growing up and we never had a problem with our oven. Well... I was wrong not a circuit breaker. The thing is just dead. Nice... Thanks Whirlpool! Thanks Century Communities for installing the absolute cheapest products in my home! Wonder what will be next? Probably the range top... Ill let you know.

I was under the impression Whirlpool washers were good. Mine always goes off balance and quits. I carefully redistribute the load several times to get it to finish (start over). Sometimes it works fine from the get-go, but not often enough. It is now 2 years old and if I were wealthy, Id shove it to the curb. There is little to like with an appliance that often must be adjusted and re-started. I will try Samsung next. It seems that American brands are not reliable. I have no special needs and will consider reliability above all. The name Whirlpool would be a deal breaker for me. I cannot abide my Whirlpool washing machine as it is more of an aggravation than something useful. Stay away from Whirlpool washing machines. They (at least mine) require the load to be balanced to a microgram. Appliances should just work and not require fiddling with.

We purchased a Whirlpool Cabrio washer 6 years ago. This washer has been such a terrible appliance, I would not recommend that anyone buy one. The top of the washer has broken 2 times. Whirlpool will do nothing about it. It is a manufacturers defect where the glass pops out of the top and then breaks the frame it is in. We had it replaced last year and the new one is now broken - same problem. It also does not get clothes clean and the clothes get ruined because they become all entangled in one another. We will never purchase a Whirlpool appliance again. I did have a 5 year service contract on these appliances but once out of warranty - you are on your own.

I purchased a whirlpool gold series microwave model #WMH76718AS one and a half years ago, paid $500.00 for it. It stopped heating. Everything else works on it so it looks like I paid $500.00 for a digital clock and a fancy bread box! I went online and read complaint after complaint that the same thing happened to other people. It appears that the magnetron is faulty. I called Whirlpool and asked their service rep how she would feel if she bought a microwave and after 1 1/2 years it wasnt working. She told me that it was man made and that I should EXPECT things to go wrong. She did offer to pay for parts... which did surprise me. But I have to pay for a $45.00 service call and all labor that it costs to fix it. I called the number she gave me and got a answering machine.... still waiting for them to call me back. I most likely will just throw this Whirlpool piece of junk in the garbage where it belongs. I dont want to spend hundreds of dollars to repair a lemon. I feel that Whirlpool knows there is a problem with their product... that is why they offer to pay for parts. But why should their mistake cost their customers money on top of all the inconvenience. Whirlpool does not back their products or care about their customers after they get your money. I will Never buy a whirlpool product again and that includes anything from their sister companies Maytag, Kitchenaid, Jenn-air, Amana and there are many more. So before you buy anything make sure you check to see who you are really buying it from!

This is my first electric range. It’s amazing! It cooks evenly and at the exact temperature! The stovetop has size adjusted burners, again at the precise temperature. And the look is very sleek & modern, perfect for a new kitchen! I am so very pleased.

I have a Whirlpool Duet Steam Washer that will be two years old in September 2013. It has been making terrible, loud noises during the spin cycle for a few months now. Repair tech told me it was the bearings and very costly. It will cost me over half of the original cost to repair a less than two year old washer. This is my second Duet front loader from Whirlpool. The first one was a drum issue and the rod ended up snapping. Again, very costly so I bought a new one. I should have learned my lesson the first time. I do not agree with extended warranties and it is just an additional money maker for the manufacturer. They should be making the product so people do not have to purchase those. Anyway, back to the washer at hand. I refuse to spend that much on a newer washer and will never purchase a Whirlpool product again. I will let this thing bang for as long as it is going to last. Unfortunately have also just purchased the dryer that matches this washer since I still had the old model Duet Dryer, so kind of stuck with them. Spent an hour and a half yesterday on the phone talking to people at Whirlpool and they really dont care if you have an issue or not no matter how old your machine is. They just want you to have purchased the extended warranty or forget it. There should be a recall and they should be helping these customers who all seem to be having the same issue. Done with them!!

I bought a Whirlpool water heater in March, 2008. Last time (not sure if its last year or 2 years ago), I had an issue of the water not heating. They have someone came in to replace a part. Recently a humming sound (scary one) keeps on coming on from time to time. It took me some days to find where the sound is coming from, and there it is, my fairly new whirlpool water heater.They said it has something to do with the orifice. Since I am not a handyman, they recommended a service guy to come in, and I have to pay. I wonder how much more I have to spend on this heater? Yes Im saving gas consumption, but it will be spent for service anyway, and I have the added bonus of frustration. It is not worthy having it. I spent $1,400 for the heater and labor.

My wife and I purchased a new Whirlpool Cabrio Washer / Dryer set approximately three years ago and have had nothing but problem after problem with these units. Weve had multiple service calls, multiple parts replaced, and after dumping hundreds of dollars into repairs and service calls (even called Whirlpool and asked for some help with parts cost but was given the cold shoulder and was told, We cant help you), we are dumping these machines where they belong - scrap heap. I will never purchase another Whirlpool product and will tell anyone who will listen what garbage Whirlpool manufacturers are and absolutely pathetic excuse for customer service and the poorest of quality product. Whirlpool will never be in my familys home again and will never see another cent of my monies.

I purchased a new Whirlpool stove in Feb 2020. First off the oven was not calibrated right and Whirlpool wanted us to do all these tests to see what the problem was. Finally, after purchasing an oven thermometer I finally got my ducks in a row and called them back to which they finally sent out a repairman. Now after almost finishing supper last night the whole cooktop stopped working. It is going to take a week to get someone out to fix it. Also, we have to purchase an extended warranty for our Whirlpool refrigerator every year because it always needs something fixed. Our Whirlpool washer has been on the blink for quite some time (no warranty) and cant afford to get it fixed. When talking to someone at Whirlpool it appears they have no compassion. I guess it is because they are just paid employees. My recommendation is to look into other products before purchasing. Do your homework.

Doesnt clean unless you prewash (by hand). Top rack unstable, falls off runner easily. Level of liquid indicator on rinse aid container broke so I cant tell how much is in it. Main door spring doesnt work so that you cant open door halfway. It flops all the way open. Very ordinary features and I dont use the dry feature. Nothing to praise here. Size is adequate for my needs. However, the bottom section where plates go isnt well designed. Dishes dont fit well. You cant put the plates in a line but there are space left over on the side thats wasted. This is the worst dishwasher I ever had. They seem to get flimsier all the time.

Whirlpool refrigerator WRT1LTZW00 - Bought refrigerator, works ok but makes noises that will wake you up in any room of the house. Had Whirlpool products for over 40 years. Why would someone make something that noises. Service came, said they all like that with new gas, cant do anything. Find hard to believe this was consumer tested. 6 weeks old, cant sleep with noise. Has anyone had same problem?

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

My Whirlpool super capacity 465 started flaking out on the temperature and burned our dinner. I had a repairman over to repair which he did after about 3 hours of testing. Less than 6 months later it did the same thing. Overheating in the oven.

We have just built a new home and have spent a ton of money on appliances. I so wish I had looked up the reviews on this Whirlpool Cabrio Washer before we bought it. It makes a very loud annoying sound through at least a third of the cycle (which I was just told by Whirlpool is the normal agitating sound). We have also had to have service out here twice in the first few months because some of the clothes come out dirty in areas that were folded over because of lack of water even on the high water setting. It also, ripped my favorite white blouse right in half. Trust me DONT buy it, you will be sorry.

My last fridge leaked all over the floor. Mice were living in it also roaches. My landlord didnt believe me though Ive shown him several times. He didnt want to spend the money. Luckily his wife came over and saw how bad it was so she got a new refrigerator for me and it has been a blessing ever since. It is just the right size for my apartment.

I purchased new dishwasher, range, microwave, refrigerator, washer and dryer 16 months ago. I have had problems with everything except the dryer! Lowes even traded my washer in for another because it could not be fixed.

Whirlpool 29 cu ft French Door Refrigerator WRF989SDAM - We purchased this refrigerator September 2013 for our new home. We moved in November 18, 2013. The refrigerator made a very loud buzzing/humming noise from the beginning and did not make enough ice. The shop we bought it from came on 2 occasions to work on the ice maker and finally totally replaced it. Then the rack on the bottom of the left door fell out and contained glass jars of pickled vegetables. They broke and made a big mess and etched our travertine tile floor. We called the shop and they sent their son out who put the rack in with duct tape which of course did not work so we took it out and put it in the cabinet. We had to pay to have the tile polished to remove the etching. On the weekend of November 15, 2014 the humming noise was so loud that we called the repair person again and they came out on November 17, 2014. At first they thought it was a fan motor but the freezer started making a loud noise and the owner came and said the compressor was going out. Our food was beginning to thaw and we asked if they could at least loan us a refrigerator to use. They brought us an old small fridge which was put in the garage. We took all our food out there. They came November 25 and picked up the fridge to be repaired. We had been told the warranty was out but after calling your company they were told Whirlpool would cover parts and labor. Today is Thanksgiving Day and we can not cook a big meal due to the small fridge and freezer and we are buying bags of ice every day. We have family visiting and must go out for dinner. We have no idea of when our refrigerator will be returned to us. This has been an expensive and disappointing experience. I would never recommend your refrigerator to anyone due to this experience. I really feel we should have been offered a new refrigerator at a discount. We bought all our appliances from Dons Appliances in Okeechobee, FL 34974 and they are all Whirlpool. This refrigerator cost $2299 and our total order was $9,642.84. We would appreciate a response from your company.

I got a new Whirlpool dishwasher and it is totally unacceptable. Its supposed to be energy efficient and the eco setting, which is supposed to be the most energy efficient, takes 3 1/2 hours and does not do a good job, doesnt dry the dishes. Ive tried all the settings and some take over 4 hours. I have talked to someone at Whirlpool twice and they say thats the way it works. How can anyone put out a product that doesnt work and get away with it? I had my last Whirlpool for over 12 years and it took not even an hour and did a wonderful job.

I purchased this machine in April and already, the right leg is rusted and the under seam of machine is rusted. I have throw rug under it and where the leg is, there is rust on the rug. I called service from Whirlpool and 2 servicemen came out. The first one told me I was loading it wrong and the water was splashing over the inside tub to rust the leg and I asked, So why is the seam under the machine rusted? No answer. The second one came out and told me he could not find anything wrong with the machine and doesnt know why it is rusting, but he never gave me a paper to sign off on. He also said that maybe it was rusted when it was delivered. Not!!! Then I call P.C. Richard in Watchung, NJ where I bought the machine at and told them about the problem. They sent a serviceman out and he said that the bleach condensation is causing the rust, its known fact that this machine has this problem. He said that the water does not run through the dispenser but there is a model that does. I want a credit on this machine and get the upgraded one. It states on the machine that I can use bleach but it doesnt say it will cause rusting. I want you to tell me how a 9-month-old machine is rusted on one leg and the seam underneath is also rusted!!!! I had a machine for 10 years and it wasnt rusted. I am very unhappy with this product and with the customer service of Whirlpool. This is my first Whirlpool washer and I would not recommend this washer to anyone. I paid $600.00 for this washer and it should not be rusting.

I purchased Whirlpool top loading washing machine model # WTW57ESVW less than 2 years ago. It stopped working yesterday. I had a trusted professional repairman evaluate it today. The motor needs to be replaced after less than 2 years?! The customer service reps basically said sorry. I should have purchased the extended warranty. Is it not reasonable to trust that a Whirlpool washing machine motor should last more than 2 years.I am very unhappy and very angry that Whirlpool will not stand behind their product. The last customer service rep I spoke to suggested she could send one of their repairmen and replace the motor at a cost to me of $299.00. So, after less than 2 years, I am offered an amount to pay of about half the cost I paid less than 2 years ago for the brand new washing machine. My home is full of Whirlpool appliances. I have been a good and loyal customer for over 30 years. I am very angry and upset with Whirlpool. Please explain to me why it is not reasonable for me to trust and believe that a Whirlpool top loading machine that is well cared for and not abused in any fashion should last longer than 2 years? Is this being a loyal Whirlpool customer gets you, I should have purchased the extended warranty”? We are talking about a motor here, not a fabric or bleach dispenser that breaks. Although, those parts should not break either, there is a big difference from something like that and a motor. Please contact me as soon as possible at either number listed above. Thank you.

I bought my Whirlpool washer/gas dryer 13 years ago and up till now I havent had one service call or repair done on either one of them. I have owned a Whirlpool washer/dryer before and I didnt have any problems with them either. When the time comes and I have to buy another set, there is no doubt in my mind that I purchase Whirlpool products again!

This machine is junk. It does not get clothes clean. I had jeans that I soaked and were fairly clean when I put them into wash and had another pair of jeans with a little dried mud. My whole load came out filthy. I am having to rewash the whole load after hand cleaning the washing machine. I replaced a machine that was 25 years old that did a better job than this piece of junk now sitting on its place.

This range is easy to clean, easy to use, multi functional burners, easy to use oven and very nice looking. We use propane instead of natural gas and the conversion was quick and efficient. We absolutely love the griddle.

I bought a Cabrio 2 yrs. ago and I wish I had my old washer back. I read reviews and checked out a lot of literature and thought I was getting a quality machine. What a waste of hard earned money. I cant get clothes clean, its loud, and it leaves soap residue even after an extra rinse. Whirlpool products arent what they claim to be. I had a freezer I bought because I bought a half a steer and it quit running and I lost all my beef - $700.00 worth. From now on I will stay away from any Whirlpool products!!

I bought a Whirlpool built washing machine on Jan. 8, 14. It stopped working on Aug. 9, 14. It is now Sept. 2, 14 and I am still waiting for it to be repaired. I am age 75 and it is difficult to load and unload clothes to take them to the laundry. The repairman order a part Aug. 26. Pony Express has not deliver the part at this time.

We purchased a WRS576FIDM refrigerator from HHGregg in August 2015 and immediately had problems with ice maker and door having condensation on it. I contacted Whirlpool who had a tech come to my house and verify problems. Whirlpool replaced it with a new refrigerator in November 2015 and w/in a week it had awful condensation on the outside of the door, dripping onto the floor and pooling water. A tech responded to our house again and confirmed the problem with Whirlpool. Whirlpool advised they would be sending out two new doors for our side to side refrigerator and said we should receive them within 4 to 6 weeks from late November 2015. I asked Whirlpool to send us a different model because this is the second refrigerator of the same model that has the same issues. Whirlpool refused. I have spent countless hours on the phone with Whirlpool, HHGregg, and waiting for service appointments and my patience is getting thin. I just contacted them today 2-9-16 to inquire about my doors since it has been well over the 4 to 6 weeks Whirlpool said it should take to receive them. The Whirlpool rep on the phone had no information about the status of the doors and said that they would have to contact the service company to inquire more about the status of the doors. He also said that under special circumstances, it may take an additional two weeks for certain door orders. I once again requested a different model of refrigerator or a refund.I tried to get HHGregg to allow me to return the 2nd refrigerator just days after I received it since I was having the same issues as the original one I purchased. HHGregg said they could not since the 2nd refrigerator did not come from them. HHGregg said that they did not know why Whirlpool sent me a replacement refrigerator directly and added that normally the returns go through them. I feel like I tried to do the right thing by contacting Whirlpool for warranty work, but I feel that if I would have called HHGregg I would have been able to get a different brand refrigerator which is what I really desire after all these problems with the Whirlpool brand. I did purchase an entire Whirlpool kitchen set from HHGregg. The only problems I am having is with this refrigerator.

This dishwasher, compared to my old one, is very quiet but does a very poor job of cleaning. I now have to prerinse most all items. The silverware rack leaves many dirty items such as peanut butter off a knife. I probably waste more water on prerinse than what is saved by the washer.

Whirlpool Duet Machines - I feel very fortunate as I have not had a single problem whatsoever with my Whirlpool washer and dryer and it is 5 years old. Never once have I needed a part or had trouble with it. I feel bad for those of you who are dealing with this as what is worse than a washer/dryer that does not work?

We bought our Cabrio set 2 yrs ago. They have worked fine, until about 4 weeks ago when we begun getting what looks like bleach stains on our dark and colored clothes. I blamed my wife for using bleach or splashing it accidentally. So today it happened again, and no bleach was used or even open near the machine. This was the third load today and the first one was towels, no damage, 2nd load whites and light underwear with some spotting, third load pair of pants and pair of shorts ruined. What is happening?

After having 7 refrigerators breakdown all for the exact same exact reason, a $12 part, Whirlpool will only take the stance that you could have bought the extended warranty. So theyre happy with you spending $150 each time the repair guy comes out. 7 refrigerators all for the same reason and theyre only 3 years old. Do you really want to purchase a Whirlpool product after that? We are a development that has furnished are condos with Whirlpool but will no longer.

My new Tridel Condo came with a brand new Whirlpool washer and dryer and the washer has not been working well since the beginning. After several service calls the repairman finally gave up and now were getting a new replacement. However its been a nightmare working with them trying to get this washer replaced. The Whirlpool delivery team and the service team cant seem to coordinate a time together for the replacement. We had to make a first appointment for the service guy to uninstall the old unit, the second appt for the delivery guy to drop off the new unit and pick up the old and a 3rd appt to install the new unit. Each appt has a 4 hour wait window. This is their standard procedure, which is totally inconvenient to customers. To make matter worse, the delivery guy came too early for a condo delivery (before 9 AM) and told us he will be back the next day. And he didnt show up. It looks like now we actually have to have 5 appts (including the 2 missed appts by their delivery guy) to have the washer replaced. All the time I wasted waiting for this delivery is worth more than the washer itself. What would be 4 hours X 5 appts = 20 hours. This is the worst customer experience ever. After 3 months of constantly calling Whirlpool and still no washer. Whirlpool needs to hire some competent people who actually care about servicing their customers.

We built a new house less than 2 years ago that included maple hardwood floors and upgraded Whirlpool appliances. The ice maker jams frequently, fresh vegetables freeze despite raising the temperature to 45 degrees and 2 service calls that didnt fix this. The latest problem is the worst. Ice built up in the bottom of the refrigerator and leaked out destroying our solid maple flooring. They are coming out again to service the problem, but who is going to pay for our swollen cupped floors?

I needed a new washer and dryer, as I sold my other ones with my last house. I have been so happy with the economy of a front loading washer, and the clothes really dont require pretreating because Tide and the washer take care of everything!

I bought a Whirlpool refrigerator side by-side model #ED2PHEXMQ00, made in 01/04. As I was letting my dog out at 4 am, I heard a sizzling noise and I immediately smelled an electrical burning odor. I lost all of my food, but thankfully I caught it before it caused a fire. Had this happened during the day, I would have lost my 3 dogs and my home. I had to borrow a mini fridge for the time being because I dont have the money for the repairs or replacement. Since this is an ongoing problem, Im not sure replacing the part will make me feel confident in trusting that it wont happen again. I may not be as lucky to be standing next to it if it does happen again. Whether its under warranty or not, Whirlpool should take responsibility and issue a recall and replace the parts. I would never suggest buying a Whirlpool product in the future.

My complaint no. ** date 11/07/2014 till date 06/08/2014. Its noted solved by services department after 100 calls by me. They Reply no parts available from company so if you buy washing machine, be careful about Whirlpool washing machine.

Purchased this machine in Jan 2012. From the start, dark clothes came out with white streaks on them. Thought I was doing something wrong - kept using machine. Then started noticing my whites coming out looking very dingy, light tan stains on them. Called Whirlpool and was told to use Affresh tablets to CLEAN my washer - why should you have to clean a washing machine?Several weeks ago noticed machine getting very loud during spin cycles - and I mean loud! Sounds like a jet engine taking off in my basement. Called repairman - he listened to my machine and said noise is the bearings, seal not fitting properly around bearings and the grease for bearings is slowly leaking out into my wash cycles. Explains the dingy whites and spots on darks. Said he just worked on a Cabrio with same issue - had to rebuild seal and bearings - about a $450 job. After reading all these reviews, decided not to attempt to fix this machine. Going to scrap it and start over. $900 for 3 yrs of an inadequate washing machine!! Whirlpool should be made accountable for this inadequate product to all of us consumers who threw away hard-earned money. Reading up on the Speed Queen agitator model. Lots of good reviews. Think I will go back to the old tried and true way of washing clothes.

I paid $1246 for a Whirlpool glass top range. This was not a cheap model, but I wanted it as the starting point of my new kitchen. After only about a year, we noticed that the area surrounding the operation controls was turning a funny color. On closer inspection, we noticed what appeared to be something peeling off, it was paint! The area surrounding the controls, which appeared to be brushed metal, was actually painted plastic! I was furious that an appliance at this cost level was made of plastic....really, a stove top made of painted plastic? I complained and after a huge fuss they agreed to come out and replace it ONCE. Well its been just over a year since they replaced it, and guess what? It is peeling off again!I dont know what to do, as Whirlpool obviously has gone the cheap end and doesnt want to fix problems. As others have mentioned, they say that it is JUST cosmetic, and they wont cover it under warranty...now my first new appliance for my first new kitchen since 1972 looks like crap! I should have kept my old avocado green appliances - they lasted over 40 years, still worked, and still looked good (except they were green). I wont ever buy another Whirlpool appliance. For those who mentioned that their appliance would turn on unexpectedly, please check recalls....this is one of the major problems on recall. Buyer beware!!!!

The control panel is difficult to use. It’s much too easy to switch power from the top oven to the bottom oven without knowing it. In addition, the plastic cover over the control panel makes it difficult to use especially if your fingers have flour or oil on them. It would be much easier and more accurate if knobs were used to control the all the functions instead of a electronic screen. Also, the clock has never operated accurately. Always runs fast. Temperature of the ovens is pretty accurate. However, it does take a long time to reach chosen temperature. Both ovens are large and able to handle an 18 inch round pizza dish. Other than the control panel, I’m pleased with both the gas stove top and both electric ovens.

This is the worst washer Ive ever owned. It consistently gets off balance, doesnt clean the clothes, and is a perfect example of poor design. I have owned the washer for approximately 9 months, and hate it. Im getting rid of it as soon as possible.

I purchased this washer two months ago and have been greatly disappointed with it. I put in a large load on wash cycle, but the rinse cycle is barely any water, and is all soapy water, so then I have to turn it back to wash cycle to get more water and then back to rinse to finish it properly. I was never told about the short water cycle, why not? It is still under warranty, but said I have to deal with Whirlpool, and all they can do is send a repairman out and if it is not a defect, it will cost me $130.00 for the service.

1st range arrived in June and would not heat to temperature. Sensor and control panel replaced. After 3 techs Whirlpool agreed to replace in September. 6 weeks later new range arrives. Protective film stuck to the lettering and when you try to remove it the lettering comes off. Chunk of enamel missing off inside oven door and defect in the glass cook top. Fast forward to today. THIRD range delivered. Same issue with the protective film and gouge in chalking around cooktop. Leons has been fantastic. They are replacing it with an entire new brand!

Bought a new Whirlpool range in 10/20. In 06/21 the control panel stopped working. Now they say the necessary part will not be available until 10/21! 5 months without a working range! Dont buy Whirlpool--shoddy products and terrible customer service.

I purchased this set in November 2013, it is now October 2014. I made the same mistake as many others have made (according to the reviews that I have read on this site). Because I have owned Whirlpool brand appliances before - including washers/dryers - I assumed this new HE machine set would be every bit as good + quality. Unfortunately, I did not do my homework!Everyone is right - this Cabrio HE washer/dryer combo is nothing more than expensive JUNK!. My complaints are all the same as everyone elses: the clothes do not get clean, soap residue remains on clothes, the clothes even have parts of the articles come out of the wash cycle dry not even having had the water touch the articles in areas! The dryer has been repaired once already for a dryer sensor problem & overheating, now both the washer & dryer are making some ridiculous hum-drum noises! Even with the extended warranty that I purchased, I can see the loop holes built into it; theyve got me over a barrel with the nonsense mumble-jumble tactics of having to qualify for adequate service repairs for replacement of parts (3x on each machine) they cant find, before even attempting to negotiate a buyout that will never happen. Never again, Whirlpool anything!!!

10 years, no problems with our 25 cubic foot french door Whirlpool refrigerator. Ice maker is a solid performer, with nary an issue. Temperature controls work flawlessly. The black frame looks great in our kitchen with espresso color cabinets.

Whirlpool Cabrio washing machine WTW8800YC0 - My washing machine that I purchased a little over 3 years ago apparently is a piece of junk. Ive noticed a smell in the past few months, even while using Affresh. Now, its making so much noise that we must close the laundry room door while the washer is on. I called customer service and they will sell me a new 1-year warranty for about $345.00. Customer service thinks it sounds like the motor or the gear box! After reading the reviews on this washer, its not worth it to repair. More trouble looms for us. Whirlpool doesnt stand behind the product and as many complaints as there are, the washer shouldnt even be sold anymore! Never buy Whirlpool!

Whirlpool electric range oven wont turn off. Used the oven 2 or so times per year.... Very unsafe, expecting internal breaker that would shut the thing down. Whirlpool Range/Oven PT3196685 happened on 6-10-2014, was baking cookies with timer on for 9 min. First batch turn out good, 2nd batch on fire before even get to 6 min, the burner is brightly hot and cant shut off from the panel... Saw ERR then COOL indicator... Tried but no respond from panel. The burner element wont turn off and temp keep rising white hot... The only way to shutoff is the house circuit breaker. But soon you turn on the breaker, the oven would turn on by itself and you cant switch it off. Where is the safety breaker on these range/oven when something goes beyond 500 degree..... UNSAFE PRODUCT. Ordered a new Whirlpool Gold 700 series but canceled after discovered others experienced similar situation with the new product. Could have burn down the house and worst when lives involved. WONDER IF ANYTHING WAS DONE TO CORRECT THESE SAFETY ISSUE.

My Whirlpool microwave has been great. Just the right size for my family, with enough settings that it wasnt complicated to use. I found it was very useful with different recipes that I liked to make. I always used it whenever possible to cut down on my cooking time because time is something we dont seem to have enough of. I have baked a lot of different items in my microwave, chickens, all kind of casseroles, cakes. You can even scramble eggs in this one!! It keeps dishes warm until you decide to serve it which is a plus because all microwaves do not have this option. I believe you will enjoy it too!

A few weeks after we bought it, the washer was already having issues spinning out, and the clothes would have to go through another rinse and spin cycle. A bout a year and a half in and I had to replace the pump because it stopped draining. Even carefully loading the machine, and at least two or three times a week it would not spin out. Two weeks ago it stopped agitating actually performing washing action and spinning out all together. Last night I replaced the actuator which controls the speed or lack thereof in the spin. Still nothing. Ive reset it multiple times, still nothing. At least the clothes are getting wet. At tax return time I am replacing this piece if garbage and I will never get another whirlpool, or Maytag washer again because from what I have been told by dealers and repair men; they are all garbage.

We bought a new side-by-side refrigerator (GSF26C5EXB00 26cf) with water and ice in the door. We have had to replace the built-in water filter every two months at $30+ per filter. This is unacceptable. We just want to know what to do to fix this problem. There is only one person who uses the ice maker, and no one uses the water in the door.

Whirlpool works great. I need another large shelf space between 2 shelves. The refrigerator has a small one but the large one I prefer.

I have had to replace my Whirlpool 50-gallon hot water heater 2 times. First time it broke, it caused thousands of dollars’ worth of damages plus Im out a $760.00 deductible. I had the last one just over 1 month and couldnt exchange it at Lowe’s because it’s a few days over a month. So I had to get return authorization before I could return it again. I went through speaking to a hateful CSR. After calling back again, the lady, a real nice lady, helped me. I will never buy another Whirlpool product again, and if anyone is smart, they will stay away from them too. Hateful, hateful CSR. Beware.

I bought a Whirlpool washer (model wtw57esvw1) about 17 months ago. In that time, the same part has gone out three times. It happens every 5 to 6 months. The part runs 97 dollars plus labor. In the mean time, I am without the use of my washer. They say they are sorry, but they only cover their product for one year. After that, you have to buy their extended warranty so you can get it fixed by them. I feel that if I pay that much for a product I should expect at least 3 years without having to repair every 6 months! I have no washer. I am giving one star only because I have to.

I love the convection cook top! It is very responsive. Its about as responsive as gas, which saves a significant amount of electricity! But, it is WAY easier to keep clean. I also love the warming burner! Having that 5th burner in which to keep something warm, while you finish other things in the oven or on one of the regular burners is very helpful. Its also great for melting butter. The ability of the oven to delay the start of cooking and program cooking to finish at a certain time or in a certain amount of time is also very useful when you cant attend to starting or stopping cooking in the oven.

In October 2009, I purchased a Whirlpool Energy smart gas water heater with flame lock safety system.$509.00 I had it installed on 5/4/2009 by Westmoreland Affordable Plumbing, $218.00. On 10/15 called Whirlpool stating that the upper thermistor was coding as a failure. They sent me another one to replace it on 10/19/2009. On 10/19/2009, 1 and 1/2 hours later, the tank was coding a bad gas valve, called back and told Whirlpool what had happened and that I smelled gas. I shut off the gas to the water heater and waited for a valve replacement to arrive. On 10/21/2009 I had E.H. Plumbing to install the new gas valve to the water heater, $150.00. On 10/28/2009 the new gas valve went bad. I contacted Whirlpool and argued with them until I had them replace the hot water tank. With their approval I went to Lowes and tried to get the same water tank but they no longer sold that model anymore. I was given their equivalent to the one I had purchased earlier. I had it installed on 10/29/2009, $150.00. I now see a class action suit was filed against Whirlpool for the model in 2008. They were still selling this model after the lawsuit???? I spent $1027.00 for a $509 hot water tank and a lot a days without any hot water. I have all my receipts and returned codes for this transaction. Is it possible to get my $300.00 back (for two extra installations) as a result of this problem? I also kept the old gas valve thermostat.

Cabrio washer broken lid, asked WP to fix warranty. They offered $250 off $500 Amana washer. Said just send me the new lid that would cost me $210. They said no. Asked if they would send me metal lid with hinges less than $100 they said no. Told them I was not going to spend more money with WP, my turn to say no. If you are wise dont buy WP products...

Sturdy, durable, and flawless operation, from the 5 multi style smooth top elements to the self cleaning convection oven with the secluded bottom element. It is a sleek clean looking appliance, and its the best weve ever owned. To one that says they dont make them like they used to, I say thank God!

Looked for the best refrig we could find and it turned out to be a piece of junk! Less than 3 years old, paid 2700$, french doors bottom door freezer. It started making a lot of noise it seem to be coming from freezer. Called Whirlpool, they said to clean coils. We wanted a repair company to come out. They set an appointment for next Tuesday between 12pm and 5pm. Said ok.Was making so much noise, and no longer freezing everything so call said company. Lady was very rude, and said they would not be out on Tuesday but sometime the following week. This would not work for us so called another repair shop, said they would be out. They were here before 6pm. Found out that they have been having this problem, had same type of call already this week. Repair for this problem would be over $1100.00. No thank you! Would just as soon junk this appliance. So very sorry we wasted our money on this.

Purchased the Whirlpool DU915 in 2004. Its been 16 years and I havent made a single repair. A lot of that is just proper use, i.e. scraping off food stuff, using correct soap, etc. I have other newer Whirlpool dishwashers at rental properties which have required repair due to misuse. I would recommend Whirlpool products to friends and family.

I have hated this Cabrio washer and dryer set since the day they were delivered brand new by Best Buy a couple of years ago. The washer does not clean well, often does not spin dry, and leaves some clothes dry after a full wash cycle!!! I have to wash small loads on the deep water cycle to even have a chance at cleaning the clothes. The clothes are so dreadfully compacted and tangled that it takes great effort to birth them out of the washer, unfurl them, shake them, and put them into the next torture machine- the dryer. It is as if Whirlpool intended to build a machine to twist clothing so tight that it requires a bodybuilder to untangle the clothing. Then the items are so incredibly crumpled that ironing has found its way back into my already busy life. Ironing is a massive challenge to the degree of wrinkles in the clothing. The slanted tops are icing on the cake. Cant even pull the clothes out of the dryer to the top of it because they slide right off. Cool.

We purchased this dishwasher in June 2014 while putting home back together following fading of our home. Within 6 months of purchase the dishwasher was doing dry washes, and getting very hot touch. Whirlpool sent out repairman who replaced parts that had melted inside dishwasher and the control panel. This same thing happened 2 more times. A repairman came and repaired and replaced parts. In May 2016 it once again was running so hot that it burned hand when opened. Once again repaired but this time it started leaking from front dishwasher. When we talked to whirlpool they sent out repairman and assured us they would pay for any and all damage it had caused. They also replaced dishwasher with Maytag of our choice which they covered all cost. When installers pulled out the unit we learned the dishwasher had most likely been leaking the entire time, water damage up entire wall, cabinets ruined, countertops had been bubbling and separating from wall, floors ruined. We followed all instructions and had three contractors come to do estimates that were from 27,500-30,680. Whirlpool then sent outside adjuster because of cost. We have now received offer of 6700 and told we could take this or submit to our insurance company. Also we now have Mold in kitchen which they are aware of and we think the flooring is now rotting and breaking.

I thought this was a nice high end washer and dryer set but it does not clean even wet mud. The mud just smears onto other parts of the clothes. My dog had an accident on her blanket so I threw only her blanket in on deep water setting, this is a large capacity washer and not a large blanket, the accident was still on her blanket when the cycle was finished. I had to rewash for another long cycle. Maybe its because it doesnt have an agitator. I was worried about this when I bought it and I will never by one again.

We have all Whirlpool Appliances throughout our entire house. Our refrigerator fan went out and we had someone come out to look at it. We called to get a parts concession as we were a few months out of warranty. We didnt ask for 100% discount, but SOMETHING considering weve put so much money into our whirlpool appliances. They simply said, We can give you nothing. Long story short, we will not purchase whirlpool appliances ever again. Dont do it, they take your money and run!

Bought Model# wtw4800xq4 washer @ Lowes 9/01/13. Started having problems within months at our beach cottage unrented, our use only, no more than 4 small loads a month. Replaced circuit board, still same problem - stuck in rinse, never drains, wont spin. Another company came out, replaced solenoid. Thank God we bought year extended warranty. Quit again. Have to wring out clothes by hand, rinse out soap in sink. Another company comes, replaces shifter, breaks again. I go to Lowes, demand new unit. They send another company out, broke next day 1 load later. Got new washer from them same model. Within months problems start again. Now broken again. After new shifter 3 months ago, songs like rocks in coffee can. PIECE OF JUNK. CALLING again for service after Christmas. Absolutely disgusted with Whirlpool and the whole lack of admission of design flaws. NEVER WHIRLPOOL, new mantra here.

We thought we were going to love it. It has two bottom freezers so the capacity is fabulous, but the ice maker location subtracts shelf space. Love the French doors, but we can never find anything quickly. The biggest issue is the popping noises it makes that are sleep stealing in the night.

Purchased WRF989SDAM00 French Door refrigerator in 2013, and 33 months later it is not cooling (fridge 45/freezer 36 degrees). Service call diagnosis is a leak in the sealed component area. Since it out of the 1 year warranty period, nothing is covered. This is the first of Whirlpools dual evaporator models, and is technically challenging according to the service technician. Most likely one or both evaporators are defective, and this type of failure comes with a recommendation to change out the compressor as well as it is moisture compromised.As my previous Kitchen Aids had 10 year sealed component warranties, and the Whirlpool is the same base mechanism as the Kitchen Aid, I contacted Whirlpool to see if they would extend my warranty coverage to these sealed components. Website submission - never got an answer. Called the customer service line - they politely told me they were sorry but there is nothing they can offer me. Even the extended service plan would not cover me as this refrigerator has a preexisting problem and it must be 100% operational to begin an extended service contract.Im extremely disappointed in this fridge only lasting 33 months, in comparison to my previous Whirlpool/Kitchen Aid refrigerators. Of course the internet just allows me to see that Im not alone is purchasing a short lived appliance. So here is my contribution to the internet of things: Do not purchase Whirlpool refrigerators expecting them to last much beyond the warranty period. Buyer beware.

Just had the repairman at my house to repair my 2-year-old Whirlpool refrigerator Model GB2F4DXWS07 - he couldnt fix it. Just throw it away and get a new one. There is a blockage somewhere in the line, he suspects the lines were not cleaned before it was charged at the factory. Repairman said it was a typical 20-year-old refrigerator problem. Customer service was no help - Whirlpool live chat is currently unavailable. Lousy product with worse service. I will never buy another Whirlpool product.

I have purchased a Whirlpool Washing Machine Mode W/P WM ROY 6212SD(31089) Sl.No.INF 153400517) GRAY/CHR TN 6.5 on 05.12.2015 with two years warranty on complete washing machine. The warranty period over on 04.12.2017. Exactly after over 3 months the machine start giving noise and we had been in touch Whirlpool and registered the complaint during last week of March 2018 and their local service center people visited, charged Rs.500/- service charge and informed that the machine to be taken to their service center to ascertain the complaint. After over a week informed that the machine complaints of Tub Support, Seal, Bearing, Drive etc. and the estimate is Rs.5,900/- including transportation (hardly 6 kms). The machine cost was only Rs.16,900/- then. I am surprised to know that just after 3 months of expiration of warranty the machine went wrong and the cost or repair costs me Rs.5,900/- is very huge. I hope the concerned will examine this.

Whirl Pool Duet Wash WFW9400SW - I had this washer for 5-1/2 years. I use it about 3 times a month. Warranty ran out this last February. Machine stopped working. Called tech and he came and said I need a new console and power board. Two weeks later I get told they dont make it anymore and sorry about your luck. I used this washer under 200 times in 5 and half years. Whirlpool offered nothing and I will never buy a Whirlpool product again.

Bought a built in oven August 30, 2018. Oven stopped heating two weeks before Thanksgiving. Repairman fixed it. It is not working again, two weeks later. Bought from Best Buy. They will not take it back. Whirlpool will not replace it. UGH!!! $ 1,600 down the drain. Will no one help?

If you ever bought something from the store and the sales person said dont worry about, if you have any problems they will go ahead and fix it.... BEWARE... I purchased my fridge from BrandsMart USA in Feb of this year.... It was approx 2500.000 fridge we bought because it matched the rest of the appliances. Little did we know this has been a living nightmare. They have been out to the house 7 times to fix this thing. Its less than 8 months old.... and its still broken. I have been without a fridge going on 2 1/2 weeks. The Senior Customer product review supervisor said he would get me a new fridge that was on the 27th. Every time I call him, his voice mail is full of.... Only to assume that is full of other satisfied customers. I HOPE YOU WILL NEVER HAVE TO GO THROUGH THE PROBLEMS I HAVE HAD. What a waste of $2500.00.