Whirlpool WRF993FIFMOO: Refrigerator Problems: the doors do not close, both ice makers went out, The computer on the filtration will go off. Refrigerator had problems maintaining temperature since 8.12.17. The refrigerator no longer works. This is my second unit since 11.09.16. It came from nfm.com.

We bought our house in December 2010 and the water heater (fg1f4034t3NOV) just started to give me fits. I had the same pilot light problems everyone else encountered. The person at the 877-251-1679 number gave me a good tip and that may have fixed the problem in the short-term. They told me theres a screen for venting on the bottom of the unit and to use a bottle brush after turning off the unit to clean the screen. I did this yesterday and the pilot light has stayed lit. I called the toll-free number and was told the water heater was out of warranty, but they could send me the part to fix the heater at half-price. I ordered it and they waived ground shipping. I hope to have the situation fixed soon. I’m very pleased with the level of service.

I bought a pair of Whirlpool front loading washing machine and dryer on May 23, 2011. The Duet Steam washer model is WFW9640XW, dryer is WED9470WW. Their high retail price was $1125 each. I did not pay this for them. I thought I got a great buy at Lowes for the price I paid, plus their 4-year extended warranty. Whirlpool used to be a very high-end appliance manufacturing company. Now, all they put out the back door is junk. I would advise not to buy Whirlpool front end anything. My washing machine started making noise about 2 weeks before I reported it to both Lowes and Whirlpool. The noise sounded like bearing not being lubricated, which that is what it ended up being.The noise got so loud that even with all my very expensive electronics (my home entertainment ctr equipment) I could not hear the TV which goes through an expensive Yamaha AV Receiver and those expensive Infinity speakers 7 channel system. The main bearing for the wash drum assembly was bad. After two emails and several phone calls to both Lowes and Whirlpool, Whirlpool was going to send the so-called re-engineered drum assembly. The style I have is 3 parts; the new one according to Whirlpool is one part, but if they put the same bearing in, youre going to end up with the same problem in another year. I live in a condo of just over 920 sq. ft. so really there is no room to repair them in my home, but that is what they are going to do. I will be getting the new drum assembly delivered to my condo and have the repair company doing this dirty job in the middle of my living room.Living in a condo, I have a small utility closet next to the kitchen where the furnace, hot water tank, and washer and dryer are. The closet needs to have some areas cut out with and installed two small hinged doors on each side, so if anything ever needs to be repaired or replaced, there would be a little bit more room to move items in or out. The problem getting the washer out is getting the dryer moved so you can disconnect the electrical plug, cold water hose for the steam, plus the vent hose. First, you have to get to the water valves which are very hard to reach. Because of the way cluster housing is made, they squeeze things into very small holes like the faucets and drain hose are located. I was asked by the repair person if I could help him lift these items out of the closet. I have had 7 fusion back operations and #7 left me in constant pain that I take a narcotic drug for pain daily. So, I called Whirlpool back and said the repair people were only going to send a tech. I was told that it is a two-man job: one tech and one helper. So Lowes needs to authorize two people since Whirlpool is sending the new drum assembly for free. I wish I could have gotten a new washing machine with the so-called re-engineered drum assembly. I am still probably going to have to squeeze between the bulkhead (wall) and the washer and dryer to disconnect everything since I am a small person. If I wasnt retired, I would have bought a different brand front loading washer and dryer, probably Bosch and took the loss on these piles of Junk. I love my country and do my very best even as hard as it is in this day and age to buy US. I served my country in the US Navy during the Vietnam War, just to see the civilians willfully buy Asian everything. So now, we have 4 Asian nations that own this country. I dont know why Whirlpool changed from a company that you could trust their products to a company that doesnt give a damn what they put out the back door. These companies still havent gotten the clue why folks buy goods from other countries. I think they need to open their eyes, but I guess with Whirlpool still being a company that is selling a very large number of appliances and making money off of us, suckers, they dont need to change. The only way they are going to change is if folks stop buying their junk.

Works fast and quietly. Easy to set up. Get the geek squad coverage and clean the filter at least monthly.

I purchased this Whirlpool washing machine model# WTW4950XW2 and after 10 months of use, it broke down. The repairman fixed it (gear box) and said that the motors and the control boards went bad. I didnt get a weeks use out of it because the motor went bad. He came and fixed the motor and it didnt work once after that. I called Whirlpool up and they sent their serviceman out twice and they didnt do much but reprogram it and both times it didnt do one full cycle. Now they (Whirlpool) are going to put a new control board in and hope it works. Whirlpool wants me to get another years warranty on the machine & charge me $100 and not do anything about all the money I spent going to the laundromat (2 months worth) while this machine was not working. There should be a recall on this machine for replacement & reimbursement of all the time and money lost.

Five years ago, I decided to splurge on a really nice (expensive) over-the-range microwave during a complete kitchen remodel and had the Whirlpool Gold Velos Microwave GH7208XRS installed, thinking Whirlpool would be a reliable brand to replace our 18+ year-old (still working) Kenmore countertop model that we had used previously. About 4 months ago, after a couple of mysterious cases of the control panel going haywire (turning on by itself in a different modes), it started pouring smoke out the top and service was called and the magnetron and inverter were replaced to the tune of $482.Fine, things happen. Yesterday, while opening the door, the handle snapped off and (upon closer inspection) I noticed cracks around all sides of the door frame - see photos. After reading about similar complaints about Whirlpool microwaves on this forum, I really feel that this is a defect in materials and should be recalled or at least addressed by the company if they want to maintain their reputation. Right now, I am waiting on their authorized repair service to see what my recourse will be.

Whirlpool Cabrio washer - I had all the same problems as all the 900 others on this site. After 7 months, it died. The factory repairman told me it needed a new transmission and motor. I returned it to Costco for a full refund and did a lot of research and bought a Speed Queen. It has no computer. It’s just an old-school washer that cleans, and best of all, it’s made in the USA with a 10-year warranty.

Not digital. Was supposed to be a quiet running machine but it really wasnt too quiet. Its cycles were well timed. Was supposed to be energy star certified, but I have to say that I felt it could have been more efficient. It was a new dishwasher in 2007, but we sold our house & moved since then & currently we have no dishwasher. :( If I had to choose, it would be a Whirlpool, GE, or LG. Easy to use even though not digital. Hot dry or air dry, plus several cycles to choose from. All easy to maneuver through. Standard size, fit under countertop, replacing an older one. I do have to say that it did stick out slightly farther than I would have liked. It was black & easy to clean. The buttons & knobs were black as well. It fit in well with our newly remodeled kitchen. It replaced an older dishwasher that had given out. The dish racks in it were spaced great & the wash ability was great - you didnt have to have an empty space in the middle of the racks which provided more space for dishes. It was also large enough on the bottom rack that I could fit pots & pans in it, even cookie sheets. Many dishwashers dont allow for this. The one thing I would have liked better is if the silverware rack was in the door, once again providing even more space in the rack for dishes.

I purchased this dishwasher (whirlpool WDF330PAHW2) in February 2019. Really worked great until May 2020. Now doesnt drain on the last cycle, smells bad (even though cleaned) and door leaks under handle on front. Really too bad. I have been a Whirlpool champion for 25 years. Now not so much.

Purchased a G16SDRXX07 three door Whirlpool refrigerator two years ago. Ever since new, when there is a very short power glitch the refrigerator shuts down and will not re-start without manual intervention. This happened at two months. Whirlpool replaced the boards. Still does it. Also when this happens the water dispenser will no longer dispense continuous water. It stops after three ounces. Now they want to charge me for a service call and parts to correct a problem that is obviously built into the unit. There should be a recall on this. Whirlpool should correct the problem free of charge as it is obviously an electronic design issue. Upgrade the necessary control board and replace it. If not, after being a loyal Whirlpool customer for 42 years, we will replace this unit with a different brand that Whirlpool does not build.

Looked for the best refrig we could find and it turned out to be a piece of junk! Less than 3 years old, paid 2700$, french doors bottom door freezer. It started making a lot of noise it seem to be coming from freezer. Called Whirlpool, they said to clean coils. We wanted a repair company to come out. They set an appointment for next Tuesday between 12pm and 5pm. Said ok.Was making so much noise, and no longer freezing everything so call said company. Lady was very rude, and said they would not be out on Tuesday but sometime the following week. This would not work for us so called another repair shop, said they would be out. They were here before 6pm. Found out that they have been having this problem, had same type of call already this week. Repair for this problem would be over $1100.00. No thank you! Would just as soon junk this appliance. So very sorry we wasted our money on this.

Updated on 03/15/2020: We bought this eight years ago to replace a 20-year-old Maytag that had finally developed a rust-related leak after serving us faithfully and needing only one almost trivial repair ($10 DIY lid switch replacement) over that period. I have replaced the water pump, the gear case, rotating seal (3 times), the lid switch striker (3 times), and the replacement gear case is making noises indicating incipient bearing failure. In its finite wisdom, Whirlpool decided to make the failure-prone main bearing irreplaceable, which means you have to replace the entire gear case, at a best-case cost of $120 and a worst-case cost of $300, plus labor, unless you do the work yourself, as I do. The secondary issue is mold and a musty odor. The most effective way to eliminate this is to pull the drum (non-trivial, requires a car jack, a 2x4, and a special spanner/wrench) and swab down the inside of the tub with disinfectant. (Been there ... done that three times over 8 years.)Original Review: I am in the process of replacing the bottom seal on my 6-year-old Whirlpool Cabrio (WTW5500XW2) washer. This will be the fourth major repair I have done on it. Fortunately, I can do the work myself and know how to find the best price on parts, but it is still discouraging that a lightly-used washer would have so many problems in such as short time. (It replaced a 20-year-old Maytag that finally rusted out.) Repairs to date: 1) replaced drain pump motor; 2) replaced lid switch; 3) removed basket twice to clean outer tub, due to mold and odors; 4) replaced suspension rods due to excessive spin vibration; 5) out of commission awaiting a new bottom seal. Total cost of parts (labor was on me) is well over $100.

Im with the rest of the people on here... The only mistake I made was not checking the reviews before purchasing a Whirlpool product. My washing machine is horrible... I dont recommend anyone purchase any Whirlpool products. Its cheap and has already stopped working twice in the last 6 months... I have had a repair man come out twice to replace the door locking mechanism... Not to mention the buttons dont work, they just slide back into the machine... Plus, you have to jump through hoops just to get the machine started the way you like it... If you make a mistake, there goes your whole ** load of laundry, not to mention the water wasted. Hell with Whirlpool - Dont ever buy a whirlpool product as long as you live.

The salesperson was great but we are not happy with our washer. We already had it swapped out once because of white spots showing up on our clothes. The only thing they could think of was that the bleach I used wasnt rinsing out completely so it showed up on our clothes. Recently, I washed a table runner by itself and it had some red in it. Now there are red spots on a couple of items that I washed after the runner. My husband just now asked why there were red spots on a shirt that he wears all the time. I explained. Also, we have had some white spots on clothes and I could scratch it out without leaving a permanent mark. Were no longer using bleach and we use only liquid detergent and all of it is HE. So I dont understand the machine. I hate it.

Favorite feature is the double oven. Both ovens are separate self cleaning. Top oven smaller, perfect for a pizza, cookies, small stuff. Great features for entertains, multiple foods can bake at same time. Ceramic top easy to clean, boil overs cannot seep under anything. I have had this oven for over 10 yrs, minimal repairs.

This microwave came with the apartment. Its the 2nd one we have had. The first one failed in our 3rd year here. We dont use all the functions, but what we have used, it works fine. Would I purchase this brand, no. I would choose GE, or Panasonic.

I purchased my Whirlpool side by side refrigerator approximately 6 months ago. Immediately upon delivery the compressor showed itself to be very noisy, especially upon start up. I questioned the delivery persons and was told it would become quieter with time. It did I not. In fact, in the following days it got worse. I contacted Whirlpool and was sent an “approved” repairman. The confusions and scheduling difficulties in this process, however, were many. Finally, when the man did arrive. He listened and said the refrigerator was working but agreed it was loud but apologized there was nothing he could do.I called Whirlpool again several times to note the noise and constantly was given the sympathy of people saying they “understood but there was nothing they could do.” Finally, out of desperation I contacted the store where I had purchased the refrigerator and they sent a manager who agreed the unit was unreasonably loud and took the refrigerator back. I researched the Whirlpool company and found they are essentially the same company that makes several other common American name brands, so I made a point not to purchase from any of these companies. Instead, I purchased from a foreign manufacturer and couldn’t be happier. All I can say is I tried to buy American but have been greatly disappointed by both the product and lack of customer service by Whirlpool. I will not buy from them or their other companies again.

We have had this microwave 3 years. The first thing we noticed was that baked potatoes were way overdone and nothing heated up correctly when using the sensor Not a big deal - just stopped using the sensor button. Now, we keep getting the open/close door message keeps coming up. I have done all the recommended fixes with no luck. Now we need to have a repairman come out to fix it. It seems when you are paying over $300.00 for a microwave, it should last longer. If I had known it would be such a poor quality, I would have bought a less expensive one and definitely a different brand. We do not use a microwave on a daily basis, so it certainly did not crap out from overuse. I would not recommend this to anyone. Save your money or you will be spending much more on repairs.

The unit I live in is at **. They purchased it in Nov 2011. The washing machine worked for 2 months. Now, it has to be dismantled at my home and take a day off. I would like a replacement. The Dutchgate is still being developed. They purchased at least 60 at this point, there is no reason not to give me a new one instead of having two techs dismantle the machine in my new home for 4 hours and a day off of work. Model WFC7500VWl, serial CD13528709. Please try to assist me.

Without a doubt, the worst washing machine Ive ever owned. After 15 years, my trusty old Maytag finally quit, so we searched around and ended up purchasing the Whirlpool Cabrio Platinum 3 years ago. In that time, the hinge on the lid broke, and now it makes a deafening noise when spinning. We called a repairman and he said the bearings were bad and needed to be replaced... Total cost $275 plus $50 for fixing the lid. When we told the repairman that it was only 3 years old he couldnt believe it! We decided against fixing it because from the start it never got the clothes as clean as we were used to, and without the agitator post in the middle, which was a big selling point by the salesperson who sold it to us, the washer continually stops with an Uneven Load message. Large load, small load, it doesnt matter. You cant do a load of any size without the load becoming uneven. We are now searching for a new washer, and although I dont know what well buy, I can guarantee it wont be a Whirlpool.

Whirlpool Microwave oven (Model # WMH1163XVS) handle cracked and Whirlpool told me the damage is cosmetic and they wont cover it. The microwave is only 7 months old and I am very easy on appliances! This is faulty workmanship and defective!

Steam cleaning DOES NOT work! I have complained to Home Depot and Whirlpool since my purchase 9/2018. They sent 2 different repair men and both times I was told there was nothing they can do. I got one phone call from Whirlpool (Maytag) and they sent me a cleaner (wish is just for the stovetop). No other return emails or calls have been acknowledged. My stove looks like it hasnt been cleaned EVER! I was also told to use elbow grease. I am so disgusted and at my wits end. Any suggestions, besides court?

Whirlpool Cabrio Washer-Dryer - Bought a set a few years ago at Lowes. They are a very attractive set and I was pleased at first. Now, I have had to have repairmen out for these units 3 times. The bearings keep going out on the washer because it spins so fast, it wears them out. Now the thing is leaking. Whatever happened to the days when appliances lasted 15-20 years. For the high cost of these things, they are junk. I am very disappointed. I will never buy one of these again.

Purchased the French door bottom freezer 29 cubic ft. refrigerator on Dec. 22, 2012. Ice maker broke Dec. 2, 2013 and it has been downhill since. Replaced it and it broke again on Jan 2, 2014. Been waiting ever since for replacement parts. In the meantime, the freezer went out. Compressor went out. Freezer is as cold as refrigerator at 40 degrees. Lost food out freezer and food molds in refrigerator after a few days. Repairman came to investigate and determined the refrigerator is a lemon and needs to be replaced. Thankfully for the 5-yr extended warranty, it will be replaced, but it has certainly been a headache. Everything shiny isnt gold...

Bought in October 2014. Died December 2015. The previous Whirlpool microwave this unit replaced was 10 years old and carried a 5 year warranty on the magnetron. Imagine my dismay to find out this unit carried only a 1 year warranty on the magnetron. So 2 months past warranty expiration Im left with a dead unit. I performed elementary troubleshooting. The unit has a fuse on the 120 Volt input. But the unit must be disassembled to gain access to the fuse. So what SHOULD be a five minute job turned into an hour and a half. The fuse wasnt the problem - replacement fuses blew like popcorn. Fuse placement within the unit without regard for service considerations is a poor design.To their credit, Whirlpool agreed to cover the cost of repairs if I would pay for labor. I agreed. A tech came out and looked at the unit. He said that he would have to order a bunch of parts and that he would be back in contact by the end of the week. Three weeks went by. There was no call from the tech; my messages on his voicemail generated no response. So a couple of days later I purchased a replacement from a competing manufacturer.

I am so disappointed, angry and tired! Unfortunately, I listened to the salesperson regarding this feature and bought it hook, line and sinker! The Aqualift self clean system is a joke! It only cleans the bottom of the oven and that is after you mop up the water left in the bottom and scrub it. No amount of scrubbing even touches the sides, back or window, even after using the Aqualift feature 3 times! I spent hundreds of dollars only to be down on my hands and knees scrubbing to no avail. I have not seen 1 good review regarding this system. Shame on me for believing a salesperson and shame on me for not researching first. I will not make this mistake again!

Whirlpool has been my brand for years but I must say that after buying this washer #WFW75SHEFWO from Lowes - on sale, which is clearly a lemon, that I will never buy a Whirlpool appliance again. Not because I believe all of their products are subpar, but because the service on these units is unacceptable. The first call for service repair resulted in the Appliance Repair Service company missing the first appointment due to being overbooked, rescheduling and missing the second appointment due to illness, and the third appointment the guy finally arrived nearly five hours late. Supposedly they were a man short. When the technician finally showed up he claimed it was the board and the pump and scheduled a time to return to fix it and then he never showed up... No call whatsoever. Clearly a lack of clear communication and no respect for a customers time. I called Whirlpool to complain. Nathan, a supervisor was attentive. I requested a different company and was refereed to Appliance Doctor in North Hollywood. Rosa, the customer service receptionist at Appliance Doctor, is quite pleasant, professional and clearly wants to correct the numerous missed appointments that keep occurring with her Whirlpool appliance repair company. First repair appointment missed due to illness, next he came and did not really inspect the unit completely, and third appointment rescheduled nearly a week later due to a death in the family. No other repairpersons? I am certain it will be a car breakdown the next appointment. I have no patience for bad management because it is always an extension of bad ethics, which if you believe many of the negative reviews on this site Whirlpool and their various appliance companies appear to frequently miss the opportunity to engage within an honorable sphere. This is a new washer purchased only a few months ago. One technician mentioned it was due to overuse of soap/. The other technician was adamant that it was a sock stuck in a pump. Really? He did not open it up or even check the unit with any thoroughness. Error codes are enough. I was informed it would cost me and that this problem of the unit shutting the door and not completing the wash cycle was not covered by warranty. I informed him that I would call the manufacturer and insist on the unit being fixed. I did so and Whirlpool agreed to cover the repair. My schedule has been adjusted repeatedly to be present for these various service appointments only to have them cancel with a text. Bad business. I called Whirlpool repeatedly and was informed that socks must be put into a wash sack and no rugs with rubber backing. Again, my jaw dropped. What? I had an Amana washer and dryer for over 12 years and they worked great! So sorry I got rid of the Amana washer now. The Whirlpool is a piece of junk... Poor design and the fact that they are okay with such bad service has me calling around to other companies for a new washer and dryer set that will be on par with my Amana set. Whirlpool is clearly keeping these appliance companies in a brisk business with such abysmal technology. I am on the phone with another Whirlpool rep, Tracy, who is very attentive and helpful. The music playing while waiting, sometimes for 30 minutes, is similar to a film score, which helps calm the anger of time being wasted.

I own a Whirlpool Cabrio. I wanted a newer technology (no agitator) washer with top loading capabilities. I ended up with a four to five-year lifespan with this washer. The bearings are busted and it leaks water from the bottom. I have followed loading instructions specifically. It will cost about $1,000 to fix so of course, I am buying another washer and a matching dryer.

Im disgusted by both Sears and Whirlpool that I have paid top dollar for my Whirlpool Duet Washer model #WFW9400SW01 (along with the matching Whirlpool duet dryer and 15 floor pedestals) at a cost of over $1,000 for the machine, and hundreds of dollars for the Sears master protection service contract. And 5 weeks after first reporting my washer breakdown and lugging my familys laundry to a ‘local’ laundromat located miles away, I still have no imminent hope of seeing a repair. This is the second time the machine has broken down within 5 years. (Dont even ask me about my nightmare with LG dishwashers!) This time the wire harness is the culprit, a part which apparently has been redesigned & which has been on back order indefinitely - all Sears can tell me is it might be available sometime in October. Is it coming from overseas, I ask. No, Delaware, Ive been told. And it could be as long as into November. While they did tell me I could begin to pursue a replacement machine by the 21st day of non-use, I am so weary of the life energy this appliance nightmare is sapping from me simply to resolve this. And Sears and Whirlpool dont seem at all concerned with the massive amounts of junked appliances winding up in our collective landfill as we all tolerate this built-in obsolescence. Besides the obvious wear & tear issue on my wood floors in replacing the machine (the dryer positioned next to it on a pedestal in my cramped powder room/laundry room will also need to be reinstalled in order to get both to fit properly), what about the consummate waste of having these machines reach the end of their life expectancy after a mere 5 years? I wish Id never upgraded our appliances. In the 7 years since we did, our LG dishwasher has failed innumerable times and been replaced multiple times, until we finally replaced multiple versions with a Bosch (so far, so good); our Kenmore Elite range has also failed and needed repair; my washer has died twice. Shouldnt we expect better when we pay top dollar? And if not Consumer Reports, then why isnt the Attorney Generals Office investigating this clear fleecing of the consumer, Sears policy in which sales people aggressively hound consumers like me into purchasing expensive service contracts, making all sorts of unreliable claims and limited time only price quotes. And then when the consumer actually needs a repair, is treated like Im last in a long line of unhappy customers. Maybe if current embattled Sears CEO Edward Lampert had to face weeks of doing his own familys laundry in a laundromat while he waited for a part on backorder from Sears, he might recognize not only a lot of other people waiting on a Sears part there too. But that while on his watch, the Sears name has eroded big-time as he sacrificed quality in his relentless drive for profits.

Whirlpool Gold Microwave Hood Combo GH5184XPS4 purchased new on 12/2009. The plastic vent cracked where clip attached by factory installed screw. The vent fell off microwave on 10/2011. I spoke with Whirlpool customer service. It is out of warranty and recommended to buy new vent part ($40.00). The new vent broke once again on 12/2011, clip attachment location. Now, the plastic door handle is cracking. The customer service is sorry and recommends to buy replacement parts as long as they remain available. There are many reports of similar instances noted online. I live in a newly constructed condominium where multiple owners have had the same problems with their Whirlpool Gold Microwave Hood Combo GH5184XPS4.

I have a 2 year old Whirlpool refrigerator with french door refrigerator on top & freezer on the bottom. I am now spending almost $700 to have a new compressor put in because Whirlpool wont back their products.

Love the design and style. It is an above the stove built-in model. And love the combination of microwave use and to have the ability to also use convection. It certainly has been an excellent purchase and would buy it again and would strongly recommend it to anyone.

I am completely dissatisfied with the Whirlpool Cabrio top loading machine. Our washing machine is less than one-year-old. It doesnt get the clothes clean, especially the darks, and it is so rough on the clothes that they come out twisted tied into knots. The dark clothes come out dirtier than they went into machine. Even though we use the dark detergent on the dark clothes and program for an extra rinse cycle, the clothes come out with white powder all over them. They need to be washed again and sometimes again. And sometimes they still dont come out clean. That is not very energy efficient. The clothes come out of the machine so wrinkled that everything needs to be ironed. I can imagine making washing machine that doesnt do its primary function, which is to get clothes clean. Todays families do not have time for this extra work.

We bought this washer on 9/05/09. Recently, it sprung a leak due to a worn out seal that the repairman said would cost more to fix than just getting another washer. You would think this might be cause for distress, but I literally jumped in the air and clicked my heels with joy! This washer has been nothing but a pain. First of all, I have to pre-soak every load before washing or the clothes come out just as dirty as they went in. I would set the timer on my stove to let me know when the 40 min soak cycle ended so I could change it to wash. Then I reset the timer for another 40 minutes. I also learned the hard way, that using any kind of heavy duty setting would turn towels into a pile of yarn. This washer cost $998, and guilt is the only reason I didnt replace it years ago. Ding Dong the washer is DEAD!!!

I bought the Cabrio Whirlpool washer and dryer thinking Whirlpool was the best! Wrong! Worst washer and dryer ever! Washer doesnt get clothes clean! Leaves white residue on dark clothes! Cant put over two blankets in large tub because it gets off balanced! It wont spin water out of delicate clothes done on quick cycle! Doesnt put enough water in to wash anything! Dryer wrinkles clothes so bad I have to iron! Paid $1,200 each! So noisy you cant stay in the house when you are washing! So disappointed I will never buy Whirlpool again!!!

This washer is less than a year old. From the start it was horrible. I was told to call a repairman who came and charged me $200 and still the thing doesnt work. I have never hated an inanimate object like I hate this machine. Oh, and the dishwasher also made by Whirlpool and also new, leaks! I will never ever ever buy anything made by this company. It should be a crime punishable by imprisonment to sell such garbage. But they keep offering me service contracts for $395 to come take a look. Thieves.

Purchased first water heater in 2008 with 6 year warranty. In 2011, pilot light would not stay lit. Whirlpool told me to go to Lowes and get a new one at no cost. But I had to pay for service to identify the problem and installation of new one, costing $250.00. A year and a half later on a six year warranty, the same issue the pilot light not staying lit. They send a pilot light assembly and we pay the shipping and installation cost of $130.00.Two years later, the same issue begins again. Calling tech support, they determine it needs a third pilot assembly at $30.00 for shipping and $265.00 service installation fee by a certified Whirlpool technician. Worked one day! Im so done with this company!!!! I was promised a call from a supervisor with Whirlpool which Im still waiting on days later. Probably for the best at this point. I think I would feel better if I could beat the crap out of a Whirlpool CEO with it! Im cutting my losses and going with a different provider. I will NEVER again purchase another Whirlpool product!

I just purchased a brand new home. I have an electric wall oven with the microwave over the oven. They are both built into the wall. Can anyone tell me why a massive amount of steam is coming out. It is really bad it makes my microwave glass so bad I can see through it. It is also making my cabinets so wet I have to use a towel to dry them. Plus I got a steam burn. Can someone tell me if this is normal.

Love love love my Whirlpool range!!! Regular bake and convection!!! Huge oven, beautiful glass top, and 2 burners that have double surfaces to fit huge pans! It has steam clean feature too!!! Incredible and amazing price!!!

My Whirlpool Dishwasher Model# DU980QPDP, just quit a few days ago after 21 1/2 years. We paid $554.04 for it back in 1995. It was the top of the line. Quiet, with 4 fold down shelves on the top rack. Silverware basket on the door. Also a separate knife basket on the door. It came with extra interchangeable door panels. When the white ones got dented we changed to the black ones. The racks are still in good condition. Never had one repair on this dishwasher, though I used it every day, sometimes twice a day. It had a 4 year warranty on the control panel and a 20 year warranty on the tub and door. We would have it repaired, but cant get the part.

Frontload Sport Duet ht: After just 8 years, bearing out on washing machine. Just had repairman out. Cost more to fix than what I purchased it for. I bought both the washer and dryer, thus the reason for the duet. So now I have a good dryer and lost its mate. I am not going to purchase another one. Very disappointed. I will not be purchasing any more Whirlpool products in the future. Off to the laundromat.

Cabrio poor design - My number one issue with Cabrio is that it is destroying blue jeans. About 7-8 pairs now. It simply rips a hole in the leg. Also, sometimes clothes arent wet, usually not clean.

Our Whirlpool 40-gallon electric hot water heater, purchased in 2008, has performed fine, until today when it flooded our basement and, of course, did not provide hot water. As the paperwork says, it has a 12-year warranty. What options do we have for repair or replacement, preferably replacement?I was unable to contact anyone on the 877-817-6750 number due to the bad weather. The model # is EE3J40RD045V, the serial # is 0742130246, and the product # is **.

My NEW Whirlpool top loader just stopped working. I bought it in June 2015. The extended warranty I purchased ended at the end of June of this year. Guess what happened a few weeks later? The thing died. Seems totally fishy! My parents washing machine lasted 20 years. Why does this one die weeks after the warranty expired?

Found a crack under a freezer rack from sidewall to back wall. This has caused the refrigerator not to operate properly. Every appliance I own is whirlpool. Bought in 2005. Also bought another in 1994 that is working fine. What surprise me is having a crack in freezer wall. Nothing Whirlpool can or will do! Was a lifetime Whirlpool CUSTOMER. GUESS WHAT? FACEBOOK I GO. 3309 FACEBOOK FRIENDS.

I called Whirlpool’s 800 customer service line to let them know I was having a problem with this loud humming and rattling noise coming from my refrigerator because of a manufacturing defect (according to the service tech that came to my house to fix it). Apparently, the metal grid is being held by a flat mental hook which vibrates. What a loud noise. We cannot eat in our kitchen: the noise it terrible. The repairmans solution was to put a piece of rubber between the two metal pieces. It worked until he left. I told him it would start again and it did! I even let the customer service rep hear the noise and she agreed. I am in the early stages of my problem, but from what I have read I am not very hopeful. I would like to have the names and phone numbers of the people at Whirlpool who refused to help. Maybe if we would all band together and call them, they would get tired of hearing from unhappy customers and fix the problems. I am game. Anyone else?

My 3 year old water heater failed and the service line would send us the part but the install was my responsibility. Shipping was free but would take 3-5 BUSINESS days. Whole has a week to wait with no hot water, $35 for expedited shipping (which took 2 days), $175 for the plumber (authorized by Lowes (1star also) for installs). 2 days later the unit is cold again... Plumber comes back, plays with wiring and gets it fired up again. Says if there is a problem again to refer the techs to the plumbers office for new tank. Well now Whirlpool says they will only take the word of their own plumber AUTHORIZED HEATING 24 hours wait for a service call. You will be the 1st job Wednesday morning. Wednesday 930 call from AH we are backed up. Hope to be there between 1 and 4 pm. How did you get backed up if I was 1st job? Never again will I buy Whirlpool and nothing from Lowes as well. Still no hot water day 3 second time in 2 months.

Purchased 2 sets of the full sized refrigerator and freezer combo. First was 2005 and second was 2015, both new build homes. We had a few probs with 1st set but the 2nd has been a nightmare. Just like others we have lost time and food because of the constant problems. Avoid @ all costs!!!! Apparently they only care about lining their pockets and not the consumer.

I purchased a Whirlpool Gas Range from hhgregg July, 2013 and the oven was non-operational within 4 months. Since then Ive had 4 repairs on this lemon of an oven. I purchased the extended warranty plan through Assurant and, fortunately, have not had to pay a dime for these repairs, but I should not need to keep repairing the same parts continuously. Either the replacement parts are bad or the service technician is terrible and doesnt know what hes doing or Whirlpool makes such poor products that they are not meant to last. There is NO lemon law for appliances and the decision to replace appliances is the decision of the Assurant Warranty Co & they won t replace it and even if they did it would be with a used refurbished gas range. Why would I want someone elses refurbished piece of junk when I already have a repaired piece of junk?!

This machine, like all other water sensor machines, will not let you wash a few items that are lightweight without filling the whole machine up almost all the way. The reason being is that if the items are light, they will float in the water above the water level and the sensor thinks it needs to put more water in and even with putting something in to weigh it down like a wet towel doesnt always work, nor should you have to do this. You will waste more water in the long run if you only have a few items to wash, ie baby clothes, underwear, rags, etc. I am so disappointed that I had no other choice but to get this machine.

My wife and I spent about $2500 on a new Whirlpool Dutch Door fridge five years ago. 18 months later the evaporator went out and the warranty was only good for one year! We bought an extended warranty, got it fixed and the other evaporator went out less than a year later after that! Next, the circuit board control on the crisper went out. Then, the water filter would not disengage and a repairman had to take the fridge apart just to put in a new filter! And now, the ice-maker has gone out and the fan is icing up like another evaporator is going... Insane! Our warranty is up next year. Once the warranty ends we will start shopping for another unit - and it wont be a Whirlpool - thats for sure. I have never owned anything this unreliable in my entire life! Also, I would say most of the time we have owned this piece of you-know-what it has made a loud disturbing fan noise... What a waste of good money! Run! Run far, far away!!!

I purchased a Whirlpool French door fridge 6 years ago. In less than a year, it was not cooling and I was able to retroactively purchase an extended warranty which ended up saving me a ton. Less than 3 years later it had broken 3 times with three different part problems with a total down time of 6 months. Despite saying it didn’t qualify for lemon law, I was able to get it replaced after presenting all the facts. 3 years later, the new one is now currently experiencing the same problem and running a toasty 58 degrees and my food is once again in coolers on ice. Shopping for a different brand and I recommend you do as well. Whirlpool used to be a brand you could rely on. No more.

Bought a Whirlpool Gas Range model WFG530S0ES0 in Nov 2015. Eleven months into owning it the oven wouldnt heat up. Turns out the motherboard and wiring harness needed replaced. Since it was within a year of purchase, parts and labor were covered. Dec 2018 the same darn thing happened. I called Whirlpool and they basically said, Tough luck, lady. Was I surprised, not in the least. I talked to a supervisor who said that they dont have a single complaint on their Gas Ranges. Did I believe that, not in the least. Whirlpool finally agreed to pay for the parts but not the labor. Whirlpool supervisor said that equipment failure occurs. I said theres a difference between reasonable equipment failure and unreasonable equipment failure. For a 3 year old Whirlpool gas range to failure twice, with the same problem, is unreasonable failure. The supervisor said in such a pleasant voice, Basically too bad for you. Oh and have a Merry Christmas.

We moved into a new house in May 2013 and there was a new Whirlpool Gas Range installed. We have experienced an intermittent problem where the oven will not ignite since day one. We have reported it to Whirlpool and different technicians have attempted to repair it but it is still faulty. When the standard warranty ran out I purchased the Extended Warranty Protection from Whirlpool but it is WORTHLESS and they cannot fix it! The last technician from Philips Appliance in San Diego was terrible. He said he would order a new control board but never did and he closed the case without telling us.When I called Whirlpool to check on the status of the problem I was told that they will not look at or change parts for intermittent problems so what did I pay the extended warranty money for? When the oven does not ignite there is a smell of gas and we are now concerned that it may be dangerous so we are about to dump this useless Whirlpool gas range to a purchase a LG model! Bottom line is NEVER BUY Whirlpool and NEVER WASTE your money on a Whirlpool Extended Warranty Plan!

Do not buy anything Whirlpool makes. I purchased a new home and new appliances. In less than 4 years motor is gone in dishwasher. 6 weeks later I have another leak that has ruined my hardwood floors. My fridge is making all sorts of weird noises and alarm is going off. They are coming to ‘look’ tomorrow. And my washing machine is no longer draining. Whichever you buy from check how the extended warranty works... Trail Appliances Calgary uses a company that is horrific to work with, doesnt have a human to talk to and wont acknowledge you unless you pay $149 upfront. RUN AWAY!!!

I purchased a washer and dryer stackable about 6 months ago. It is suppose to have warranty but when calling the first time to Whirlpool their system was down and the girl was rude and hung up. Today I called and the only time they can offer is work days Monday-Friday 8-5. However, I live in Texas and work an hour and half away from where I live. I have just been transferred here so limited people known. So in order to get my dryer not even 6 months old fixed I have to accommodate the hours available and miss work. The dryer just stopped heating and stuck on the sensing wet cycle. I am a single parent of a disabled son, so with this said a days work is bills not getting paid. I find this unacceptable for a company as well known and one of the best not able to accommodate someones work hours for pretty much a lemon. It was a brand new dryer and washer.

This washer is 5 years old and the top is rusting out on the inner rim. I have city water that has been tested and found to be totally safe to use and drink. Neighbors using the same water and owning different brand washers have no rust problems. Does anyone else have the same problem with their Cabrio washer?

When the fridge is running and there is a power loss of about a second or so, the fridge shuts down and will not restart (even after hours). I have to unplug it for a minute or so then plug it back in; it runs fine until the next very short power failure. When we are out of town for a few days and that happens, we come home to a fridge of ruined food and a mess. I have contacted Whirlpool (2 times) and they were no help at all. It seems to me a software change could solve the problem, but they are unwilling to listen.

I have a Whirlpool dryer for about 8 years. The lint catcher has some holes so I called the 1800 phone no. that I got from the dryer and order the part. That happened in May 18 - I pay for it. I have been told that I will receive the part in 5-7 days. Today, Aug. 27, I called see what really happen with my part. Well I have been transferred from a department to another. I waited over an hour on the phone. No employee can find my order in the system and hey keep on telling me that I did not order! In the end, the order have been found. They told me that the part has been in the back order and I will receive it on 9/12/2014 - 3 weeks away adding up to 4 mo since I order and my credit card was charged. I cancelled the order> I really do not want to deal with Whirlpool ever again. I am happy to pay for a new dryer - some other brand and put in the garbage the Whirlpool - for a lint catcher and bad customer service.

I have purchased one refrigerator double door Mastermind 230 Ltr. capacity on 08/02/2009 at a price of Rs17200 from Himanshu Sales at Halol, Panchmahal, Gujarat. After one year, there was a problem in the refrigerator. My complaint was given to Himanshu Sales Halol. A service engineer came and replaced OLR and starting relay. I was charged Rs500. The bill was not given. Again cooling was not achieved. My complaint was given to customer car complain no. 22265 on 26/04/2011. Service engineer came on 10/05/2011 and reported that compressor get overheated. He has replaced compressor, capillary, gas, starting and overload relay and charged Rs1650. But compressor continued on, it does not cut off on temperature. I complained on 22/05/2011. Again service engineer came and replaced thermostat and charged Rs150. On 02/06/2011,again cooling was not proper. I complained on 05/06/2011. Service engineer came and advice to send the refrigerator to service center at Halol at our cost. After one week, it was sent back to me. Still ice not forming in freezer. We thought that it is due to summer. We also informed Himanshu Sales Halol. They advice to give complaint to customer care. Complaint was given on 28/11/2011. On 29/11/2011, a service engineer came and informed us that the compressor overheated. On 06/12/2011, the service engineer came with new compressor. He replaced the compressor, capillary, starting and overload. After gas charging, fridge was started. Still ice was not forming in the freezer and there was abnormal sound coming from compressor.Now we are tired to take service from Whirpool. I think this is a company defected piece, so send some senior authority to check the same and to take necessary action. Also due to this problem, my electricity bill got on higher side, and the purpose of the appliance is not solving. On 12/12/2011 at 11:30, the service engineer came and put some instrument to measure temperature at freeze on super cool mode and told that he and Samir will come to check the same. After that, compressor was in running mode up to 19:30 without cut off on temperature. Nobody has came to check,we called him. He replied that Mr. **, the regional head, will come tomorrow, 13/12/11. Still cooling is not achieved, We have registered complaint under complain no. AH1211007719 dated 13/12/2011.

I updated appliances in new house, but didnt realize the builder would choose the smaller side by side frigidaire. Could use a larger freezer space, also would like a ice maker that cut off when bucket is full. Overall I love Whirlpool appliances.

MODELGR673LXOQ WHIRLPOOL RANGE - I purchased this range in January 2014. It is a good-looking range with a ceramic top and a convection oven. It has burned more food in a year than I had burned in several years. The top burners get red hot no matter where you have them set. They turn on very hot, then turn off and after a while they are red hot again. Cooking anything that requires a medium or less heat burns to the pan bottom. The oven works alright as a regular oven but when put on convection it burns the food closest to the fan before the rest is cooked. The company sent a technician to check the stove. He checked the temperature of the oven and said it was running too hot. He changed that setting and the first time I tried to bake it took forever. I reset the oven back to where it had been. The tech made no attempt to check the top burners as he said they couldnt all be bad. I hate this stove I had my former stove for thirty years and never had problems with it.

I bought my Cabrio washer about 3.5 years ago. Little after the year, I had to replace the lid because the hinge broke. Then came the F1 code, which I noticed if you turn the machine off for a couple of minutes, it resets itself. About a week ago, it started making a grinding noise and staining the clothes with oil or grease. Transmission problems. I was told by the seller it had a 10 year warranty. I called them up and now I got to foot the bill for a technician to come to my house and tell me what I already know plus labor. Might as well buy a new one. Beware because I believe Kenmore is manufactured by the same company.

I purchased my Whirlpool refrigerator about 4 years ago and havent had any problems with it. One of the things I like about it is it has adjustable shelves not only in refrigerator part but also in the door part so that you can put bigger items like milk, etc. in door. It also has crisp bin for things like lettuce that works very well.

11 months after purchasing my Whirlpool 40 Gal Gas Water Heater N40T61-343 I woke to cold water one morning and found the LED flashing 4 times - high temperature shutdown. Unable to find any reset I called Whirlpool and after a couple questions, was sent a replacement control unit. Happily it arrived 2 days later. I was told then that it was because I had residue in the tank. I had no idea how he determined that because none of his questions even touched on that. Anyway, I had hot water.Nearly a year later now to the day and again I have no hot water. This time the pilot burns very weakly when I try to light it and then goes out. After three attempts I get 7 flashes on the LED - Gas Control Valve Failure, part of the same unit I replaced a year ago. Am calling tomorrow since its too late to go through any tech support steps over the phone that Im reading about on this site and seeing on Youtube. Honestly, I didnt replace the last heater because I had nothing better to do than replace parts on this one annually. No, I will not purchase another Whirlpool unit especially after reading all of the similar if not identical issues others are having.

My washer worked less than a year. I finally called Whirlpool and they basically said, were a big company and you must for the rusty, broken drive shaft, pay for all new computer face plate, and service repair. I contacted the FTC and they told me they needed more complaints in order to make them do a recall on Cabrios. Good luck!

We bought a Cabrio washer model #WTW7300DW0 and are very unhappy. The clothes come out of the washer dirty, with chunks of soap, (yes we are using HE detergent) and patches of lint on them. The low water design is a joke. The clothes on the top of the load never get into the water. The lid needed repair from the first day we bought it. We have tried all the water settings and the clothes on the top barely move. Why hasnt Whirlpool figured out that this design is just not working? Our three month old washer is headed out of our house one way or another! Notice we didnt give it any stars!

I just purchased a top load wtw5000dw01. There have not been any changes to this revised model except the lid only locks in the rinse/spin cycle now. If that even helps anybody. It still has the noisy agitator which is the thing I hate most. Whirlpool engineers better go back to the drawing board and redesign their washers. Whats this country come to when you spend a pile of money on something that sounds like it is broken from brand new. I also had a washer that was 15 years old and never had noise issues or problems with it. Its just not Whirlpool that uses this so called new technology.

I bought Whirlpool top-loading high-efficiency low-water washer Sept 2018, model WTW5000DW, Serial # C83444466. Worst washing machine ever! No matter which water level you choose, it will not dispense enough water to cover the top of the clothes load, therefore the clothes are just moved from side to side with only the bottom layer of clothes getting wet; top clothes stay dry. Not enough water to fully agitate to clean the clothes!Whirlpool serviceman came today (Jan 13, 2020) to recalibrate the settings. VERY NICE MAN BUT THERE WAS NOTHING HE COULD DO TO SOLVE THE LOW WATER LEVEL. Recalibrating settings did nothing to solve the problem of not enough water. I am 81 years old and I have to manually add at least 4 buckets of water to an average load of clothes. This is unacceptable. Wont someone please initiate a class action lawsuit against Whirlpool for selling this very obvious poorly designed machine? NEVER EVER BUY A WHIRLPOOL WASHING MACHINE. It is a waste of money.

I bought this piece of junk Whirlpool Cabrio washer two years ago and it’s been nothing but junk. Just like everyone else, this thing has never gotten my clothes clean no matter what I do. Anything with a drawstring or straps gets ripped up or stretched out. It’s loud and shakes, even though it’s leveled. Now, to top it off, it’s leaking water from the basket seal. I called Whirlpool and they couldnt give a damn. Since it’s out of warranty, it’s my problem, even though she said they know this machine has a lot of problems. So now Im stuck either fixing this thing or buying a new washer. Every appliance in my house is a Whirlpool and Ive had nothing but problems with several of them. I thought when I bought the brand it was a good brand and they stood behind their stuff. Boy, was I wrong! I will never buy Whirlpool again! They should recall this washer!

I’ve had my Whirlpool Duet for 12 years and it has been a great one. I’m a mom of three sons, all of them wash their own laundry!! Lots of loads are done weekly and it cleans well! We leave the door opened after it’s unloaded so the tub will dry. Every few months, I put a tab in it so it will clean out all of the buildup. I don’t get the “front loader smell” that way.

Absolutely read the reviews on this machine before deciding on a purchase. I have experienced with great frustration every issue addressed in other reviews. Clothes constantly have to be rewashed. The Quick cycle will leave your clothes in a puddle of water. But then there is no spin only cycle to correct that. I have purchased Whirlpool washers before with great satisfaction but this machine is not worth the money I paid for it and does not save me on water or electricity costs because of all the rewashing I have to do. Like others I am stuck with this machine until it dies. You lost me as a customer, Whirlpool.

Bought a dryer (wgd9050xw) 3 years ago. We bought a more expensive one than we had originally picked out. Every year its had to have a repair of same part. First year it was under warranty which tried to bill me so I had to dispute the charge. Charge was finally dropped. We just had it fixed again for third time in 3 years. Its a fire hazard because belt wears a pulley and basically melts it and gets belt hot. I just contacted Whirlpool and awaiting response.

We have had our Whirlpool range for probably 20 years. We have never had any issues or problems with it. Our washer and dryer are both Whirlpool too. I would recommend this brand 100%! I think this is the brand that my mom always had too. Their products are very well made and last forever (it seems like they do!).

Stainless steel rusted in under six months - Purchased all new Whirlpool kitchen appliances in March 2013. In July 2013 finish on both refrigerator doors and freezer door was covered with tiny rust spots. The finish was obviously defective. Contacted Whirlpool, sent photos and was told the damage was cosmetic and not covered by warranty since it didnt happen within 90 days of purchase. Ice make did not work right from day one. Finally paid to replace it myself and repairman said Whirlpool discontinued the style of ice maker I had because they had so many complaints.

In June 2003, I purchased a Whirlpool Gold Conquest Side-by-Side satina finish refrigerator (Model Number: GAS6SHAXLL03; Serial Number: SP1452552). The ice-maker has always had freezing up issues which I never complained to the company about. It has made weird noises (nothing major) but was already out of warranty. I paid $1,600-1,700 for it. I did not have the money to pay for repairs and I am sure that the repairman would have never found the problem. Two days ago, there was an electrical smell in the house. After an hour or two, it started getting stronger and stronger so my husband looked at the fridge. There was smoke pouring at the back of it so he pulled it away from the wall and we unplugged it. Surprisingly, the plug was not hot. Had I not been home, it could have caught fire, burned the house down and killed my dog! I am furious about this. When I called, Whirlpool says, That model is not under a recall. Would you like me to transfer you to service for repair? Really? Those big corporations dont care! There needs to be a recall on this because I have seen this same problem many times on blogs and forums. Well, guess what, I used to be a Whirlpool fan, not anymore! Now, I went and purchased a new refrigerator, and the brand name is Samsung! I recently bought a Samsung front loading washer and dryer and they are great. It looks like the Whirlpool dishwasher in my kitchen will be next! I bet Samsung makes a nice dishwasher.

I havent had my Whirlpool Cabrio washer for even 5 years and I have had to replace the glass lid and now the tub bearings need to be replaced... I have read countless complaints for the same issue. I feel like Whirlpool should at least send out free replacement bearings and the $85.00 bearing press tool that you will need if youre handy enough to fix the problem yourself. PS to all of the poor victims of Whirlpool bearings, go to Amazon and you can buy the bearings and the tool for about $150.00. You will need to order bearings part #10435302 and the bearing driver tool #w10447783... And as far as my matching dryer - knock on wood - it still runs great.

Whirlpool Cabrio does not clean clothes and leaves white residue. I have had it for 1 year. Spent so much money on this set of washer and dryer and it is a piece of junk. Whirlpool customer service does not care or respond. Worst purchase ever.

Nice looking, prices very fair for quality product. Options are always good. My mom used Whirlpool. That thing that goes in the middle of the old time washer is now gone. That thing would rip or stretch out clothing bras. Anything that was nice it would make it look horrible. Ive had my washer and dryer for 6 years and they still work like new. When shopping for a washer and dryer I do look for capacity, energy efficient and the brand. I prefer to stick to the old school brands just like my mother did. I must admit that I do love the fact that it is an HD high efficiency washer. The deal-breaker would be a low quality construction made a washer or dryer nobody needs to have problems with it. If youre spending that type of money you need to get good quality items.I love my washer and dryer. Theyre both and white color. Its a Whirlpool Cabrio with HD High efficient load energy saver and H2 wash system. The washer has a lid with a see-through glass which I love. My dryer is also a Whirlpool Cabrio steam with a resource saver that gives me a lot of different options as far as my clothing is concerned on how I need it dry.

My Whirlpool refrigerator/freezer stopped cooling just after a year. I had to buy a $319 warranty. It was fixed, but broke several months later. The repairman said he would try to stop the leak and it worked for a couple more months. The refrigerator was obviously irreparable and we should have had it replaced by Whirlpool at this point. Now, that it broke again (stopped cooling and freezing) the repair service is giving us the runaround. Its over a week and they wanted us to call a repair service and they would reimburse them. The repair service and Whirlwind know about this problem, but refuse to acknowledge it and are getting away with it. With all the comments Im reading here, there should definitely be a recall. Id like to know what it takes to have one authorized.

We purchased a Whirlpool Cabrio washer in 2009. It makes awful sounds during the draining and spinning cycles, has started leaking in the past month and now, several error codes and will not finish a load of laundry. We have a family of eight and thought that we had bought a very dependable product for what we need. Boy, we were wrong!

We bought a new stove from Lowes in 2015 which is a Whirlpool with an AquaLift self-cleaning function. This function is totally useless. We have tried it several times and it does not remove the grime from the oven. We did not even have a very dirty oven. It doesnt clean the sides at all and the bottom is still dirty. I complained to the store and they told me the AquaLift function should be used every time the oven has been used. They recommend that I use a spray for the oven (which is porcelain) and scrub off the dirt. Give me back my old self-cleaning oven with the high heat. This new technology doesnt work.

Whirlpool Cabrio Platinum Washer - I have a 2 1/2 year old washer that has been serviced twice. This week 10/2/14 the service technician informed me that we had a bad tub bearing. The bearing failure caused a leak which corroded the rotor & stator. It was more cost effective to buy a new washer than to repair our unit!!!! Ive never heard of a washing machine needing to be totally replaced after 2 1/2 years. Any ideas how to deal with Whirlpool?

Purchased my Whirlpool gas hot water heater. After 1 1/2 yrs, the blinking light shut off, called tech at Whirlpool, made me move hot water heater to outside. I moved it outside and when called back, I was then told to send 4 photos to prove that I moved it, in which I did that. He told me that still was not right... and still he would not help with reset. I live in my parents old home w/ water heater in bathroom for 50 yrs. No problem... it was vented thru ceiling to attic. Now it is outside, unlit, in a steel hub (as directed) and still not ok...I have no hot water and have not for 4 weeks now... Whirlpool sucks... never buy their hot water heaters. Had to pay a serviceman $750 to move heater, run cold/hot water lines and gas line and it still does not work... with NO HELP from Whirlpool. Now I am in process of buying an electric hot water heater and have to pay an electrician to run a 220... I am on fixed income and this stinks... biggest regret... WHIRLPOOL.

I purchased washer (Whirlpool Cabrio wtw5600xwg) on April Fools Day 2011. The first repair was check on 1-27-12. I complained the machine was too loud and clothes seemed too wet - the call was under warranty but tech was unable to verify complaint. So guess what? On Jan. 21, 2013, machine sounds like a stressed jet engine. Now we are diagnosed with a bad gear case for a total repair of $439. Now we are not under warranty and Whirlpool takes no responsibility. Doesnt the consumer have any rights? Do you think Ill buy Whirlpool again?

We bought a gas hot water heater from Lowes on Dec. 31, 2010. In July 2011, there was no hot water. After much yelling and headaches, Whirlpool agreed to send out a technician to look at it, since I refuse to go in the attic and I will not work on gas appliances. After 7 days with no hot water, they replaced a valve that failed, they said, because our attic was too hot. The old unit never complained. Eight months later out, the unit went again (and we had an attic fan put in). This time, Whirlpool sent out a local plumber (and I paid for the call) though we had a warranty and extended plan with Lowes?! This time I was told no problem it was too windy and it blew out the pilot. Its funny we never noticed the attic being windy even during the hurricanes. Four to 5 months later, well, you guessed it but this time my husband just re-lit it. Then the next time, 5 months later, my brother-in-law did it. That was August to September 2012. See, this morning, there is no hot water. I had to fight with Lowes since we have the 5-year extended plan. I cannot get anyone to explain why it makes sense to them that a 2 1/2 year old hot water heater has to be re-lit every 4-6 months. Then I went online. Now I know why Lowes and Whirlpool are ignoring the issue. So, anyone know a good lawyer or what are they doing to get satisfaction?

I purchased a Whirlpool Cabrio washer (WTW6500WW1) on 9/11/09 for approximately $800. Now three years later, it needs a new rotor and stator costing $470 in parts and labor. I called Whirlpool and was told I could get no help with the cost of parts because of the age of the machine! A simple Google search of the F51 error code that I am getting will show you that these machines are $800 pieces of junk! I am not repairing this machine. I am going to run it until it dies and simply buy a new washer. You can bet your sweet self it will not be a Whirlpool! I can only hope to inform enough buyers about this to keep them from the same fate.

My 79 year old grandmother hasnt used her Whirlpool washer in 5 months because of defects that Whirlpool USA thinks they are going to fix. Really??? How long is she going to go without being able to use her washer that she bought from your company? Is it going to take a year? 5 months!!!! I should be billing you for all of the out service of laundry we are having to pay for because of this inconvenience. I have never experienced worse customer service and more of a waste of my time and my dad’s time. I hate posting this but the only other option is therapy for my family from dealing with this insane issue.

Purchased electric double oven range WGE555SOBS02, from Lowes end of 2014. Couple months it came on by itself, middle of night, 879°. Repaired panel 3x, then Lowes replaced stove, middle 2015. 6/26/2017 error message F2E1, control panel... stuck / shorted key. Out of warranty. Lowes and Whirlpool both claim no previous complaints. They will send repairman to assess problem, $150.

We have had a Whirlpool hot water heater for 6 years and 14 days. Note the 14 days. It has been nothing but trouble and we have called the company repeatedly for help. It finally stopped working altogether 14 days after the warranty ran out. Thank you Whirlpool for nothing! It had a filter on the bottom of the heater that constantly had to be cleaned which was next to impossible. We had to buy a special brush to try to reach it. My husband had to take it apart several times a year and clean it to keep it running. Whirlpool should have replaced it within the first year but instead offered many suggestions about cleaning and etc. so they would not have to replace. Today it is out of my house for good and I would advise anyone reading this to beware! Horrible product!!!

The worst washing machine ever. First off you cannot turn the water on to let it fill and add clothes as its filling. Secondly the Normal setting will not allow you to spin on low, your choice is high or no spin. High tangles your pants, slacks, shirts, etc. No spin leaves them soaking wet. Also its a water safer but never, never, never covers the clothes in water, and sometimes they dont come out smelling so clean. I dont save water if I have to rewash two or three times. Absolutely hate this washing machine. When I get enough money I am going back to the old agitator model and not any Whirlpool either. Oh and the other thing, you cant just throw you clothes in the washer, you must arrange then to the outside of the center itty bitty agitator. Hate it.

I purchased a brand new Whirlpool Cabrio Washer from Sears less than 5 years ago and am junking it! It has all the same problems everyone else has mentioned. I have had it serviced for faulty motherboard, unbalanced tub, broken lock mechanism. It had rusted out on the inside. Clothes are never clean and it constantly becomes unbalanced in spin cycle. We have to stop and rebalance every single load 3 or 4 times--or more if trying to wash a set of sheets or two or more towels. Cant leave the machine unattended for even a few minutes. I might as well be hand washing on a scrub board at the edge of a river! Waste of money and Whirlpool Customer Service wont say anything but should have purchased extended warranty! What a load of crap from what was once a reputable company that used to make a reliable product. WARNING--NEVER BUY A WHIRLPOOL WASHING MACHINE!!!!!

As very happy owners of a previous model of this fridge freezer when ours needed replacing, we went direct to Whirlpool and bought the latest model. What a mistake! Other comments on this site are so accurate if only we had seen them before. A kitchen floor covered in ice mush (cubes seem out of the question) and tepid water from the water dispenser whereas on the previous model it was chilled. Basic functions that the previous model excelled at. Sadly it is also badly designed inside the fridge. We raised these issues with Whirlpool within our first year who merely said sorry you are unhappy and thanks for your comments. Be very wary of Whirlpool products and service.

Like many other reviews Ive read here this morning, I bought a Whirlpool Cabrio HE Top loading washer before I did my homework. I purchased approximately 2 years ago. While I dont seem to have the volume of complaints Ive read from others, I do have many intermittent complaints. As others have described, from day one I have gone from this uneasy feeling about how it is working to down right POd about the condition of my clothes after a load finishes.List of issues you will avoid by buying a different product: 1. Water levels SO low your clothes dont get clean. Yes Whirlpool, thank you for trying to save me $$ by lowering my water bill, but for goodness sake there should be enough water in the damn tub to cover the load. I literally watch dry clothing twist back and forth and NEVER go out (like they claim) to the edge of the tub and under then back up in the center. Instead they just sit there watching from the edge while the poor items of clothing in the center get twisted together.2. Powdered detergent, even if listed as HE will not dissolve in this low water level and will end up as white patches of film on your dark clothes. Suggestion to avoid this - dont use powdered detergent, but even if you use liquid HE detergent, you may still experience white patches of soap film on your clothes. It happens on all of them but shows up clearly on dark clothes. Setting the washer to always do a 2nd rinse cycle will improve the outcome. Not a perfect solution since the point of a low water washer is to use LESS water and not more by running a 2nd rinse on all your loads.3. No Consumer/User options to allow you to use the washer as you see fit. Since I paid a small fortune for this stupid washer and didnt realize that I would never again be able to dye fabric in my washer I am posting this as a warning to other crafty consumers. DONT BUY THIS WASHER if you ever want to dye fabric or an article of clothing larger than underwear. There is absolutely no setting on the washer cycles that will fill the tub with more than a few inches of water. The washer falsely has a mislabeled setting called Deep Water Soak. This is absolutely a LIE. Good thing I tested the cycle before putting my blanket in there to dye it. The cycle spins many times in the beginning pouring water into the clothes, then empties the tub and does it again. Then after 10 minutes into the cycle it begins to fill (if you want to call it that) the tub.After putting about 3 inches of water in the tub - not even enough to cover the top of the articles in the tub (I used 6 towels as my test subjects) it stops to soak. But stuff is still sticking up out of the water!!! OMG! So frustrating. This would not do for dyeing anything of value as you would not be able to agitate enough to ensure coverage of the fabric evenly with dye. Just dont buy this washer if you have, as I have in the past, enjoyed changing the color of linens and re-dyeing dark clothing that have faded! Whirlpool clearly didnt care about how consumers actually need to use the washer. I may try using this setting by pausing and filling it manually with buckets of hot water from my sink to get enough water in there to cover the fabric. Its just ridiculous that I even have to consider how to outsmart my washer!4. Smelly clothes. Seriously. I do the obligatory monthly Affresh cleanings, and I have learned to leave the lid open after the last load of clothes so the tub can air dry. However, I still from time to time pull a load out of the tub and it smells like mildew. And dont think for one second that the smell will go away when dried. I have opened the dryer and pulled clothes out, smelled the mildew and put them right back in the washer for a 2nd go round. Nothing worse than putting on a clean nightgown and smelling like mildew! Ewe!! With this awful washer you can NEVER leave a load of washed clothing sit for any length of time or you can look forward to smelly clothing. Hate it. Absolutely HATE it. Again, this defeats the purpose of using less water.Cant make myself spend more dollars that I dont have in the budget to replace this piece of crap. I have figured out all the workarounds for now, but as soon as I can replace it I will send it to the dump. Not going to resell or donate to anyone else as it would just be a burden for others. If there was ever a rightful need for a class action lawsuit to compensate consumers for false claims by a company - this is it! Hope this helps prevent anyone reading from making the poor purchase decision I have!

I bought a Whirlpool French door, freezer drawer on bottom at Lowes 2 years ago for $2,600. The refrigerator needed a new motherboard within the first year and now that it is in the 2nd year, service is required again. The repairman ordered the part and came the 2nd time to replace the part upon receipt. Now it needs the 3rd part since it is still not working. I have a herniated disc in my neck and had to remove everything from the refrigerator and freezer to take downstairs to salvage our food. Now I have to go through the same thing again for the 3rd time after the additional part comes. This refrigerator is junk. I asked Lowes for a new replacement but of course was denied. Does anyone know a good lawyer for this type of situation? I never had a problem with an appliance like this.

Bought a Whirlpool refrigerator at Home Depot in 2018. It has been a $3,000 piece of junk!! Customer service is garbage!!! They refuse to address a persistent problem since the day we bought it. Do yourself a favor and buy another brand!!

I have the Cabrio washer that is only four years old. It is leaking oil and is very loud during the spin cycle. I paid $800 for this washer and am extremely frustrated that it didnt last longer than this. I contacted Whirlpool customer service and had no luck since it is out of warranty. Due to the high number of complaints with the same issue, please consider a class action lawsuit. Thank you.

My oven was 11 months old when I tried to use the self-clean cycle for the first time. 2 hours into the 4 hour cycle, the oven completely shut down, door locked shut and no lights on the control panel. The repair tech came out on a warranty repair call (no charge), explained that Whirlpool does not use a thermal protector rated for a self-cleaning oven and that it blows every time. He then proceeded to replace it with the same thing because he is only allowed to put in the recommended part, which is not rated for the high temp cleaning cycle. So the oven is usable, but not the self-clean. Since I am at the end of the 1 yr warranty period, even if I were able to get Whirlpool to replace the oven (ha!) there would be no warranty because I only get the original time limit. So if I had a new oven and it blew out, it would not be under warranty for fix/replace. The repair tech said this is a COMMON problem with Whirlpool self-clean.

Ive been a landlord since 1997 and have multiple sets of coin laundry machines. The older Whirlpool machines are great and have lasted 25-40+ years with almost no issues. Replaced a washer with this model 4 years ago and have multiple problems. Im buying a used coin operated washer thats older than this model just to get rid of it. Cost of parts is almost half the cost of a new washer, and adding on labor and time makes no sense. Very happy to get rid of it. Electronics instead of mechanics has been the problem. Electronic switch that is activated with the coin slide broke, the main board fried, and the lid switch has caused problems

Everything I have read is what I am going through... First the clothes didnt come clean. Lint piles on everything dark... Then at 1 yr and 7 months old, the drum and spin mechanism breaks. It cost me $333 in labor... Should have cost me nothing as far as Im concerned. 2 weeks later, its putting a code up that the hot and cold lines are crossed. Nope, its the whole computer board. Whirlpool again said they will just pay for parts... piece of crap. I paid for the best... Sure didnt get it.