I have a refrigerator model WRT359SFYM00 that is 4 months old. It suddenly just stopped getting cold. Trying to contact Whirlpool warranty/service department has been a nightmare. Once I did get them they spent almost a week trying to locate someone in my area to service it. I was in constant contact with the phone support person, but they kept telling me its out of my hands a special unit was making calls to find a repair person. After almost a week they informed me they could not find anyone but if I could find someone to service it they would reimburse me (max $250 labor). I spent 5 minutes and 1 phone call and I found someone.They wasted a week bumbling around with wanton disregard for their customer. Their service after the sale is deplorable. They are staffed by people who answer calls but have no ability or authority to fix a problem. Worse yet, they kept telling me it was out of their hands. If not in their hands, then whose? I assure you I will never buy another Whirlpool appliance simply based on this warranty experience. What a horrible way to treat your customers. Shame on Whirlpool!

Overall, I am happy with my Cabrio BUT we purchased a Whirlpool WTW7000DW0 Cabrio top loading washer w/ electronic touch panel in May 2016. We experienced water hammer from day one. I finally had enough yesterday and knowing that the plumbing could be suffering (15 year old condo), purchased 2 Sioux Chief MiniRester, Model 660-H arresters (Lowes at $9.99 each) and had a plumber install them today. I could have but am nursing a fractured rib. Long story short, they work perfectly. There is NO indication elsewhere in the unit that water is even entering the tub unless youre standing right beside it.Ive been told that hammer problems exist in ALL high efficiency washers, all are prone to this problem. I was also told by a Whirlpool support person that the Cabrio is a Samsung design and the pulsing of supply water off and on, over and over is normal operation. If I had been informed when purchasing that hammer is a common problem, I would have installed arresters from the get-go. At the very least, manufacturers should include arresters as a part of the sale; installers should make sure that every new installation includes arresters. All told, I am out just under $200.00 for new technology that really could have been engineered out in the beginning.

There seemed to be an issue with the Whirlpool Cabrio Washer Pump. If a button comes off from your clothing or snap, etc., it gets trapped in the washer pump, causing it to crack and leak. Whirlpool on warranty only allows for one free change and anything after that costs $300.00. This is going to be the third time we are having problems with this and it is becoming, economically, a struggle for us. We have checked every button and snap to make sure they are fastened tightly, as well as any other type of items that may fall off in the wash and become trapped in the pump causing it to crack and leak. These pumps were poorly made and Whirlpool needs to be more aware of this problem rather than telling the customer that they are not aware of the situation.

WRF989SDAW02 - Oct 2013 1st refrig delivered. After 4 repairs within 6 months, Whirlpool put in a request to the Exchange Review Board to replace. New refrigerator (same model though) was delivered May 19, 2014. 4 repairs later for the exact same thing with the 1st refrigerator, it was again sent to Exchange Review Board to replace. New delivery was set for July 30, 2014. When delivery company arrived at my house with new refrig, I was told it was smashed on both sides. They would take care of contacting Whirlpool and schedule a new delivery date. From July 30, 2014 to present I still have no refrigerator from Whirlpool. I have 15 documented phone calls to Whirlpool or JB Hunt (delivery company).

The Whirlpool fridge we bought kept freezing food in the fridge. Local technicians couldnt solve the problem after replacing some parts. They called Whirlpools technical person and found there are other similar cases for this model. We were told to wait till they solve the engineering issue. We require to replace another model. Whirlpools customer service Supervisor whose name is Alisha talked very arrogantly and hung up on us. In one word, bad products, bad service, bad people. We will stay away from any Whirlpool product in the future.

Bought Whirlpool 30 gal propane water heater in Feb, it lasted until May before the unit died. Paid for the extended plan warranty (NEVER do that!). Called support and they said they could send someone out in a little over a week (week with no hot water). The week goes by and on the day it was suppose to be repaired the guy calls and says his van broke down (this was a Friday, getting that early weekend). The earliest they can reschedule is in another week (over 2 weeks no hot water). Called Lowes to see if I can just return it (extended plan and all), no, you need a return code from the whirlpool customer support. Call the Whirlpool number again to ask for a return code, no, it is a repairable problem (even though no one will come repair it). Lesson learned, will never buy Whirlpool or anything over $50 from Lowes again.

We bought a Whirlpool Gold French Door refrigerator in 2010. Just when the warranty period passed, the refrigerator started leaking water from the bottom floor. Initially, it only leaked about once per month. But as time passed, the refrigerator started leaking more often, and now its leaking every 2-3 days. I saw many people complaining on the same problem and some of them even submitted since 2006. I dont know why Whirlpool doesnt resolve this issue in many years.

We purchase a Whirlpool washer model # WTW5000DWI, SERIAL #C842 43102 ON 10/30/2019 and it has been nothing but a disappointment. We are senior citizens living on a very limit income with several health problems, and cannot go to a washeteria to wash our clothes. We had a washer that lasted over 19 years and when the motor failed I figured it was more practical to purchase a new washer versus repairing this old one. We had a very reputable Whirlpool dealer here and was very helpful and recommended this washer and the price was in our budget! Was that a big mistake, it does not clean the clothes, does not rinse the clothes with using the 2 rinse cycle and still, does not rinse a load of sheets. I bought a large capacity washer so we could wash 2 sheets at a time. Wrong! You cannot get more than a couple inch of water on the Deepwater cycle, so its like washing clothes on a riverbank on rocks, it rubs clothes together. On my wifes good clothes it will cause little balls of fabrics on them, clothes does not smell clean, and if its real dirty clothes, it will not clean or take the stains out. Its water efficient alright, it does not use any water!Its for sale, and I have talked to a lawyer. Whirlpool customer service was no help at all/All they want was to send a dealer to check it out, the only problem if there is nothing wrong with it that will cost me min. of $125.00. Warranty will cover a manufacturing defect, not a design problem which is what this is. I will just go to small claims courts and get my money back and be done with Whirlpool, hell they dont care! I would buy any washer that is cheaper and has an agitator, without a water efficient features and is top loaded model. It does not pay in this world where large manufacturing companies dont care.

Good Morning. We recently built a home with Pule in Nexton, which is located in Summerville, SC. The appliances we chose came with the dishwasher, stove and microwave. Everything other than the dishwasher has been doing great, but as for the dishwasher I am extremely upset...we are newly weds and received two nice sets of glass and at least 12 of them have been broken in the dishwasher. Please advice.

I bought a Whirlpool front load washer, model wfw5620hw, July 19 2019. It worked for 5 months and quit working properly. I have been trying to get whirlpool to fix this piece of junk and have gotten nowhere. When I try to call them there is a 40 to 70 minute waiting time then I got transferred to another department for another 60 wait. This has happened several times in the last two months. I have never been treated so badly by any company in my life. I bought this machine from Menards and they just refer me to whirlpool so they are no help. I have two other commercial coin operated whirlpool machines and they have been great but this model is junk. Other people are having the same problem with it as I am having.

Since these are made in Mexico as told me by the Lowes rep, quality has suffered. 1st one so crooked and put Roger on, no doubt a crooked floor, could not be fixed or leveled or plumbed. Got a replacement and, yes, same problem! Took off upper hinges and reamed all 4 hole out to line up tops of doors. Only problem is box of fridge is sooo racked that rear shims are needed, and many to experiment. My floor is perfect so its not that. Fixed for now but I am a pretty.much a perfectionist. Dont buy, make. Then Chuck them all in a landfill where they belong! And I dare anyone to try and get thru to them! THEY DONT CARE AT ALL!

Old stove does the job. I need a new and updated one. Need a warming drawer. Lower drawer does not close properly anymore. Paint on back panel is chipping. We are limited to range choices because of space.

After 7 calls to Whirlpool and 3 service calls, we still have white detergent stains on all our clothes. Today Whirlpool told us we needed to put one item at a time into the machine. Not only that, but pants needed to be loaded waist band up and gently placed; Shirts, collars up; socks toes down, etc. etc. Are these folks at Whirlpool serious?? So today, we called them back - still streaks. The folks at Whirlpool want us to take and send them pictures of our clothes. This is ridiculous.

I have owned this Whirlpool Refrigerator French Door MODEL WRF990SLAM01 for less than 10 months. The ice machine broke down completely a few weeks ago. We called Whirlpool and they sent a repairman out the following week. He left saying he had to order parts. About 8 days later, they called to let me know they have the part in and scheduled a time to fix it. They put the new part on and said ice should be coming out in the next 72 hours. It never happened!! Not only did the ice maker stop working, the freezer stopped working which was about $300 worth of frozen meat/goods down the drain. I called the appliance repair guy. He said, I was worried about that, this product is known to have these issues. I asked, Does Whirlpool know? He replied, Absolutely, they have a kit to fix this but its not 100% guaranteed to fix this issue. REALLY?!!! I called Whirlpool and they could have cared less. There were no apologies, no type of compensation (exchange/replace). It is now going on day 22 and we still have no ice or freezer. This fridge cost me $2500 and four requested days off so I could wait for the repairman. Whirlpool, you as a company should be ashamed and outraged. You are more concerned about the bottom line of recalling these lemons and forgetting the impact you are having on us consumers. How many people are going through this issue that will not under any circumstance purchase a Whirlpool product again? I am so happy I am not investing in this company as this will impact this company in the future. They may be selling quite a few now to new homes/builders but when the word gets out what type of product they are selling and not repairing prior to the sale and knowingly letting people buy these, it leaves quite a bit of culpability on their hands. IF you are going to sell crap product, then stand behind it and repair/replace it prior to selling it to retailers!! You are a pathetic company!! STAY AWAY FROM WHIRLPOOL PRODUCTS!!!

I have Whirlpool gas range, model # WFG361LVS1. The igniter went out after only one and a half years of light use (4-5 times a week). I did not buy the extended warranty, so part is not covered. I only asked that they send me the part for free. I talked to a supervisor at Whirlpool (Dave). He said I should have bought the extended warranty. He said he could not help me. He was also very rude. I will never purchase another Whirlpool product.

Whirlpool side by side refrigerator Gold series - I smelled something electrical burning and noticed black smoke billowing out of the back of the refrigerator. I pulled the refrigerator out and unplugged it. I took off the backing and saw a little white box that was on fire. When I unplugged it, the fire went out. I plugged the refrigerator in again and it went up in flames again. This could have been a lot worse. My smoke detector did not go off. It was 12:30 am and was getting ready for bed. If it had been an hour or so, Im afraid this could have ended a lot worse than a fridge full of groceries gone bad. I googled refrigerators catching fire. There are at least five videos with the same problems which lead me to believe there are several more out there. Why hasnt this been recalled?

My wife and I went and bought a new Whirlpool 27 cubic foot French door fridge model WRF767SDEMO1 in 3-13-17 from Lowes and I have all the paperwork. And on Monday the May-28-2018 it stopped making ice, so I called a repairman and he came out May-31-2018 and he said it was leaking gas and it cannot be FIXED and it is JUNK. He told me to, Call Whirlpool and tell them you want a new one. I called Whirlpool and they are sending one of their repairmen out June -5- 2018 to check it and by that time I will lose everything in the fridge because it stopped working.

Bought in 2009 brand new set washer and dryer together at Best Buy. The washing machine in 2011 started its never ending problems. I’ve paid for parts & labor for the door lock sensor mechanism multiple times where I learned to repair that myself even buying parts and installing on my own last time... Then a drain pump went bad. Replaced that. Now a code f51 sensor to a motor rotor not spinning issue. Horrible. All the money and time in this unreliable machine is so awful. This thing also isn’t that great when it works too. Goes unlevel way too much having to redistribute and restart cycles all the time... Wish it washed better for the price and all the trouble. It is the worst machine. Has to be! Everyone I know can’t believe the fight I’ve had through the years with this machine. The company doesnt help you. Costly headache Junk machine!

My husband and I purchased a Whirlpool water heater from Lowes about three years ago. We have had trouble ever since! The pilot light will not stay lit. We have done everything imaginable to try to repair it. Every time I call Whirlpool, I get the same reply. They email me some instructions on how to repair this piece of crap. I dont understand how they can make a product that they do not stand behind. Whirlpool use to be a reputable company, not anymore! I will never buy another Whirlpool product ever! And I will tell everyone that I come in contact with not to buy from them either. I am also considering filing a lawsuit against them for making such junk! Do not buy Whirlpool water heater.

I have always chosen Whirlpool or a Whirlpool product such as Kenmore or KitchenAid. Preferably with an actual agitator in the tub. As a very capable handyman, repairs have been easy and relatively reasonable in cost. My units are 15 years old and going strong.

I purchased a whirlpool gold series microwave model #WMH76718AS one and a half years ago, paid $500.00 for it. It stopped heating. Everything else works on it so it looks like I paid $500.00 for a digital clock and a fancy bread box! I went online and read complaint after complaint that the same thing happened to other people. It appears that the magnetron is faulty. I called Whirlpool and asked their service rep how she would feel if she bought a microwave and after 1 1/2 years it wasnt working. She told me that it was man made and that I should EXPECT things to go wrong. She did offer to pay for parts... which did surprise me. But I have to pay for a $45.00 service call and all labor that it costs to fix it. I called the number she gave me and got a answering machine.... still waiting for them to call me back. I most likely will just throw this Whirlpool piece of junk in the garbage where it belongs. I dont want to spend hundreds of dollars to repair a lemon. I feel that Whirlpool knows there is a problem with their product... that is why they offer to pay for parts. But why should their mistake cost their customers money on top of all the inconvenience. Whirlpool does not back their products or care about their customers after they get your money. I will Never buy a whirlpool product again and that includes anything from their sister companies Maytag, Kitchenaid, Jenn-air, Amana and there are many more. So before you buy anything make sure you check to see who you are really buying it from!

My Cabrio was built in April 2016, its now Feb 2019, and its not working. Shows error code of LF, the inlet water value is bad. I bought a Sears protection plan, repairman comes out, tells me no-one has the part anywhere, its backordered and no way to know when it will deliver. Sounds like a scam so Sears doesnt have to fix it and Whirlpool makes little to none of the part so you have to buy a new machine. This machine also takes forever to wash clothes, sometimes part of the clothes come out dry because not enough water. Its a huge tub, but of no use because theres not enough water to clean properly therefore, you have to do small loads. I always put it on high water because the other features like, quick wash & normal do not give but only little streams of water! The first one I had delivered made a funny noise from day one so Sears replaced it the next day. This one has NOT even lasted 3 yrs. There needs to be new legislation placed upon these companies with regards to the products they make. It should be illegal to make such junk and be able to charge high dollar for it and it doesnt operate well or last very long. They are laughing all the way to the bank on everyones dollar, intentionally making products that last less than a few years! I Will NOT purchase Whirlpool or any of their products again! They owe me a new Cabrio and Im going to make sure I get it and get my moneys worth! DONT WASTE YOUR HARD EARNED MONEY ON THIS JUNKER! DONT BE FOOLED BY ITS PRETTY SLEEK LOOK.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

I dont know how anybody could write a good review on this machine. It always requires deep water wash and sometimes two cycles to get clothes clean. On regular cycle, it doesnt get water on all clothes. Oh yes, it does save water... Ive pulled things out with dry areas on them.

I absolutely HATE my Cabrio washer/dryer. I cannot get the mold smell out of my clothes. The clothes come out dirty and smelly. I have no idea what to do about it. It was a huge sacrifice to purchase these and a complete waste of my money. Whirlpool - please stand behind your products and take it back! Worst purchase Ive made in years.

I wish I had purchased this a week before I decided to become an owner of a portable AC unit. This unit cools my 390sq ft living room with ease, paired with a large 3 speed stand-alone fan, the adjacent rooms feel the coolness as well. I plan on purchasing another uni, with a lower SQ rating as to have for the master bedroom. Easy to install, move and drain when the time calls for it. Not too loud, not too big, not ugly and I would purchase this unit again.

I washed my expensive sheets in the washer on deep water... hot and filled up the bleach dispenser as instructed... My sheets came out splotched and ruined... I also keep getting lint on my clothes. This thing just doesnt clean. Im so upset about my sheets. Please dont buy this thing. Also bought Whirlpool stove and paint was peeling off after 3 months. They wouldnt even help me. Im so sorry I trusted Whirlpool.

My Whirlpool refrigerator/freezer stopped cooling just after a year. I had to buy a $319 warranty. It was fixed, but broke several months later. The repairman said he would try to stop the leak and it worked for a couple more months. The refrigerator was obviously irreparable and we should have had it replaced by Whirlpool at this point. Now, that it broke again (stopped cooling and freezing) the repair service is giving us the runaround. Its over a week and they wanted us to call a repair service and they would reimburse them. The repair service and Whirlwind know about this problem, but refuse to acknowledge it and are getting away with it. With all the comments Im reading here, there should definitely be a recall. Id like to know what it takes to have one authorized.

My Whirlpool microwave has been serving me for over 20 years. Never a problem. It performs well at all settings. Size is convenient for mounting over range. I recommend highly because of reliability and performance.

Stay away from all Whirlpool products. The appliances are terrible (broke twice for different reasons within 14 months of purchase). Customer service wait times are over 90 mins and the technicians take over 3 weeks to get to the house and they dont fix it, they order the part and that takes another 3 weeks for it to arrive and the technician comes back. We bought an extended warranty and when the fridge broke a second time, they canceled the warranty and said they had the right to cancel it as it was in the contract. Terrible, terrible company. I work in the service industry and I am in shock that this company can get away with treating customers like they have.

Easter is in five days. Our dishwasher purchased in December 2014 is not working. It has been broken since December 2015. Repairmen have been here THREE times. We were told that our warranty only covers parts and repair. Our dishwasher does not wash dishes. We went for a more expensive model and it didnt last a year. Whirlpool, remember your commercial?

Purchased a gas hot water heater from Lowes in October 2015. Installed the hot water tank and two months later started smelling a faint gas smell coming from around the Honeywell box. Called Whirlpool and they thought it was the gas valve and replaced part, but had to pay $30 for overnight shipping. Had plumber install new part and did not fix the issue. Called plumber back out and he found a small pin hole size leak behind pilot light. Patched the leak and still had a gas smell coming from around the Honeywell box. Called Whirlpool back and after some back and forth was able to get hot water tank replaced, since it was only two months old and should not need any maintenance that soon. Replaced water heater with new tank and this tank has a gas smell coming from around the Honeywell box as well. We replaced all our lines and even had the fire department check out our gas lines. Could not find anything. I am still baffled as to why this tank has a gas smell coming from the Honeywell box. I cant seem to find anyone else having this issue. Whirlpool or Lowes has not been any help. Ready to unhook it and buy another brand. Anyone have this issue?

I have a Whirlpool Duet front loader. Sick of it since I bought it! Not enough water to wash & rinse clothes. After consulting sites on internet, husband decided to try adjusting part. He just took off the 3 screws & lifted top off. On the outside part that has a white plastic housing, he turned the longer screw 2 1/4 times clockwise. EUREKA! We have more water! You may need to start out adjusting 1 turn & work up till you see a water level you like. Just dont let the water come over the wide rubber water guard.

I thought with the big tub I would be able to wash my king size bedding and other large things. Theres barely enough water to wash a small regular wash. Since it has no water it does not clean my clothes. Why the big tub if you cant use but one fourth of it?

I have had a terrible experience with fridge Whirlpool. Two fridges have been delivered to me in bad condition. The first one was aesthetically awful (looked old and used) and the freezer didnt work so it was exchanged. The second one works and it looks ok but it makes very loud noises all day every day. I live in an open concept condo and this fridge sounds like a train for more than an hour more than 5 times a day, it is terrible. I have been calling customer support for a solution and first of all, there are no technicians in my area, and since the fridge works as designed there is nothing to fix so Im stuck with a terrible noisy fridge that I hate and destroys my day which I paid a lot of money for thinking that the brand meant quality but it doesnt. Customer support doesnt respect the customer and their answer that the first works as designed makes me understand that Whirpool designs bad quality fridges. I have never heard a fridge making these noises, not even brands that are less named than Whirlpool. For your inner peace, I recommend you to stay away from Whirlpool-Maytag fridges... If the fridge is in bad condition (but working) youre going to be stuck with it. The brand doesnt really mean quality and support... it just means more expensive.

Bought a Whirlpool refrigerator December 2011, it is now 3 yrs. old, keeps shutting itself off. There is nothing under the troubleshooting area of the instructions for this. I called Whirlpool, they said I have to pay a tech to come here and troubleshoot. The warranty is 1 years, so after paying over 1k for an appliance, that gets you 1 year! I try to support American made, but no more Whirlpools here! I have all Whirlpool appliances, but Im guessing they wont last either. Very disappointed in the lack of customer service.

I have a front load Whirlpool Washer and it has leaked within 6 months of having it. The rubber piece was replaced and it still leaked. Whirlpool wont take responsibility for its product. I have to put towels down around the washer every time I use it because it leaks. I purchased this because it is more economical to use a front load but not when water is leaking from the washer.

I purchased 3 appliances (microwave, stove, and dishwasher) on 10/22/10 when they were on sale at Sears for my soon to be remodeled kitchen. I did not have them delivered until 11/15/10 until contractor was getting ready for them. They still were not installed immediately. On 11/17/11, in the evening, the microwave stopped working. I called Whirlpool on 11/18/11 for service. Whirlpool will not honor the 1-year warranty since technically I bought them in October 2010 but did not even have them installed in my home for use until the end of November or beginning of December 2010. Common sense tells me the company should honor the warranty. Are products being made today to last less than a year before they go bad? To pay for a service call and parts, I can buy a new microwave (but you can bet it wont be Whirlpool).

I felt compelled to write this review, to sum it up NEVER buy ANY Whirlpool, KitchenAid etc brand. Nothing but the worst experience, it all started with a 5 year old Whirlpool fridge that stopped cooling, I called and they said they could send someone for like 200$ and that it does not guarantee it will be fixed. So I called an independent and he tried to refill the freon, but it was leaking behind the fridge in a section you cannot access because they want you to buy another one, so 5 year old fridge in the garbage and now to top it off, a KitchenAid knife set that is barely used, one of the big knives broke cutting a fruit, and good luck in any circumstance getting any customer service. SO NEVER AGAIN, TRUST ME AND PUT YOUR MONEY ELSEWHERE ON ANY OTHER COMPANY.

The dryer lint screen is located at the door base. This is placed incorrectly, in that if you have any lint on screen it attaches to wet clothes. The screen should be located at top of dryer for a less messy clean up process and away from your clothing.

Whirlpool Dishwasher model # WDT720PADB. Replaced an old Maytag that was 12 years old; cleaned great but finally the pump gave out. From the first day that we cleaned dishes with the new Whirlpool, the dishes were not as clean as the old Maytag and totally wet even when the heated dry cycle was on. Repeated calls to Whirlpool customer service and two technician visits and still the same results. We end up drying every load by hand. Now after 14 months (two months out of warranty) only the silverware wash jets are working with all other zones inoperative. This machine is a plastic piece of junk and all it takes is one look at the cheap construction and components to say that Whirlpool engineers are competing with the Chinese made brands. This boat anchor is going to the curb tonight! Never again will Whirlpool get my business!

GW399LXUS range is Dangerous. Sheet metal cuts your fingers. In over 6 months, Whirlpool has failed miserably in fixing the problem. Bad replacement parts. Incomplete parts shipments. A dozen service calls. The local independent service companies are the only ones who have acted professionally. Other than the poor people who answer the complaint lines, nobody at Whirlpool seems to care. The product is poorly made and the product support is not competent. The range may have the features that we wanted, but who needs all this headache?

WTW6340WW0 - When washing clothes, on the last spin it stops and gives an UL error message. I make sure all the clothes are level and restart at that point but still the UL error message appears and water starts leaking from the underneath of the machine. Weve reset the and unplug the machine but no difference. Please help on what else to do.

My Whirlpool refrigerator needed a $400 mechanical repair shortly after the 1 year warranty expired. Its only been 13 months since repair, and the refrigerator is experiencing the same problems again! Whirlpool is plagued by negative reviews across the internet... hundreds of complaints on Yelp.ca forums, and consumeraffairs.com. There also used to be hundreds of negative Google reviews, but mysteriously all of those reviews have disappeared, and you can no longer leave a Google review for Whirlpool Corporation.

I HATE, HATE, HATE the aqua lift clean feature. Its awful. The bottom came somewhat clean but cook bacon and the sides and top are filthy and the aqua lift cant clean that. I dont know how this ever made it past the thought process stage to become a thing but it needs to go away. Im quite cranky right now as Ive just spent two hours scrubbing my oven while reaching past the oven door that doesnt come off because its a self-clean oven. This is what I have to look forward to for the next 10 years until it dies and I can get a new oven? What a joke!!

My issue is I believe that Whirlpool should pay for my tub and bearing part because the washing is only 16 months old. Because it went over the one-year warranty by four months, I shouldnt have to buy this part considering it is such a big break for such a young washer. Please advise if Whirlpool will assist me with this issue.

Whirlpool tells its technicians that the front molding piece on their dryers is a disposable part . Basically, it has to be removed to examine the console and removing it will break it 90% of the time. Therefore, the customer will have to replace a $100.00 part simply to diagnose any problems. I now have a dryer with no front panel simply because I wanted to know why a button was sticking.

We purchased the Cabrio Washer and Dryer from Lowes during a Black Friday sale, November 2016. The items were delivered when we closed on a new home. Thus, we didnt start using the washer and dryer until 3 months after purchase. One month after usage we had our first service call. To the point, what the other reviews say are the exact experience that we are having. Unfortunately, we did not do our research before buying. The washer: Clothes come out wrinkled, littered with lint, and the wash cycles are excessively long. The dryer: Clothes take a long time to dry, and most times we run the dry cycle twice because, after the first cycle, the clothes are still damp.Even though the washer and dryer can accommodate larger loads, we are forced to break out the laundry into smaller loads to get better results. Still, doing the laundry is negative experience with the Cabrio. Recently, it took nine hours to fully complete 5 loads of wash. That included the dryer cycle. The repairman said that he is well familiar with the issue. It is the new technology. The software is incredibly sensitive and can fault easily. This leads to another negative feature. The software is restrictive leaving the user with little control over how they want the wash and dry cycles to perform.Going back to the conversation we had with the repairman. He said he had a Whirlpool washer and dryer at home that was over 10 years old. The old fashion kind with the dials and less complicated technology; and he has never had an issue. I have to agree with that. Our second home has the Whirlpool Duet (washer and dryer) that are 13 years old. Never had a problem technically and with washing and drying clothing. We plan to try to contact Whirlpool about their return policy. Not a quality product. Definitely cannot recommend this washer and dryer. We truly purchased junk.

I purchased model FG1F4040SEPV Whirlpool water heater from Lowes about 5 years ago and have had to literally replace the thermocouple each year. At least 3 of these years we have had to pay someone to fix this for us until we learned to do it on our own. Im very surprised Whirlpool didnt recall these water heaters and make it right for their consumers. What this did for us was confirm that we will never purchase another Whirlpool item ever again. We are switching over to Kenmore!

Bought a stainless steel Whirlpool Gold bottom freezer in 2011. I purchased an extended warranty from Lowes (4) years, and still have another year left on it. Im constantly having to mop up puddles that form under the right front of the refrigerator. I read someone elses review with the same issue along with a sheet of ice forming in the bottom of the freezer and having to chip it out so the freezer drawer will close! Im calling the warranty company today.

Purchased the Whirlpool Cabrio washer January 2010. Purchased the extended 2 year warranty from Lowes. After about a year I noticed around the bleach dispenser it was starting to rust. Over some time it worsened and grew bigger around all sides. I was unhappy about it, but thought it was just cosmetic and didnt pursue the issue. Now it must be on the inside and has started putting yellow spots on all of our clothes. It was only a towel or two at first and now it is on everything. I called Whirlpool and Lowes customer service center and they are just sorry and will not do anything. Lowes warranty does not cover any rust whatsoever although I cant find that stated on the warranty papers. I will never buy another Whirlpool product, ever. $600 for a washer and $70 for an extended plan to last on 3 years. I know people who have washers for 10 or 15 years. Im so disappointed.

Whirlpool oven WOD93ECOA501 - This oven will most likely lock up if you use the clean cycle. I wish there was a class action suit in California. This happened first time I used the oven. Very expensive to fix, and though it was 9 months after a kitchen remodel, it was not under warranty because we bought it early and it sat in garage, and Whirlpool could only use purchase date. This is not new technology. Upper and lower oven both locked. Wish I had bought a Blue Star oven, as my Blue Star cook top is fantastic and a pleasure to use. HAS ANYONE GONE TO SMALL CLAIMS COURT?

The washer buttons stopped responding after 19 months. Lid lock sensor didn’t work. Replaced control board because new sensor did not fix it. Went bad again after a week. I have to replace it. I think 1 year warranties are not enough for a major appliance.

On July 19, I was forced to buy a new washer. Bought a Frigidaire which, when connected to the water supply, started immediately dumping water into the drum. Sent this defective washer back to the retailer and chose a new Whirlpool. O-M-I-G-O-S-H! It was delivered on 25 July and despite having 4 temperature settings, it only worked on either hot or cold AND you could never tell what temperature was going to be chosen by this computerized wonder. I repeatedly called Customer Support and received three different answers on what temperature was considered warm. The answers ranged from 65 to 102 degrees. Also, you could open the lid when the water was running in, which washers are no longer supposed to do. Whirlpool then arranged for A & D Service to come and repair my NEW washer and scheduled an appointment for a week later. I was forced to call that company to find out if they were even coming. When they did not show as promised, I cancelled the appointment and called Whirlpool to ask for another service company. They then scheduled me for two weeks later (now August 30th). The guy did come and told me there was user error - I had used too much soap as this was an HE washer. I asked him to show me where on the appliance and in the owners manual that it stated the washer was an HE. He couldnt find it either and said he would replace the computer and the door lock because his computer found that the washer was hit and miss on anything it was set on. At any rate, it is a little over a week later and I have heard nothing from the repairman and, of course, no follow-up from Whirlpool. Do not make the mistake of buying any Whirlpool product, and that now encompasses names such as Maytag, Amana, Jenn-Air, Kitchen-Aid and many more if you want to be assured of a quality product and excellent customer service. What if this had been a refrigerator? The whole debacle has been a nightmare. Wish I had bought a GE!

I have owned my Cabrios for over a year. They have given me no problems at all! I keep them cleaned with Affresh, even though Ive never ever had a smell in them. Also, I have never ever had my washer or dryer not do its job!! My clothes are fresh as a daisy and clean. I bought my Cabrios because my father purchased his first set and raved about them. So, I used his to try them out. Absolutely wonderful machines!! You get more area without those crappy agitators in the way for one thing. Always fresh water, not washing in the same filthy water, yuck! It wasnt but maybe 4 months later for our new house that we got our Cabrios. I insisted on them! LOVE LOVE LOVE my Cabrios!!!

Unfortunately, I can not rate this machine LESS than one star. I would rate it ZERO. We purchased the Whirlpool Cabrio washing machine model WTW7800XW0, 2 1/2 years ago in 2011. Since that time, we have had nothing but trouble from this machine. The machine basket gets off center when you have heavy items in there like jeans or a large load of towels and just stops working until you raise the lid and even out the clothing in the basket. If you wash something like a throw or a set of sheets in it, they get all twisted and wrapped around the thing in the center and end up in a big mound. We have had the glass top lid replaced on this machine TWO times over the last 2 years because the plastic frame on the lid around the glass cracked and broke and became warped in a raised position. This caused the machine to stop working because the machine will not wash clothing unless the door is locked down, and the door cant lock if the lid is cracked and warped and broken. So you have to set something heavy on top of the lid to get the lid to lock so you can wash a load of clothing! TWO times we have had repair people out to our home to replace the lid and now the lid is cracked and broken again, for the THIRD time! This is THREE broken lids in just over 2 years. Unacceptable!! The hinges on the lid that attach the lid to the machine are also rusted. This rusting has happened on all the lids that we have had replaced in the last 2 years. I will never, NEVER purchase another Whirlpool product again, EVER. Their products are inferior quality and JUNK. We have the Whirlpool dryer also to match the junk washing machine and the quality is just as bad but we are living with it because we have no choice right now. It takes 2 hours to get a load of clothing dry and forget drying jeans or towels; it takes forever! Whirlpool makes a dreadful product and their customer service is even more dreadful. =(

Weve had our Whirlpool Cabrio washing machine for about 3 1/2 to 4 years. At first, it left our clothes wrinkled, so I purchased a steamer to help remove the wrinkles. After a few months, it started making a terrible clanging noise. My husband was able to repair and it ran okay for a while. Over a few months, it got louder and louder. It does not get our clothes completely clean. Some even come out dry on one side. Now, we are getting an F50 code and it shuts down after 1 minute. After reading the reviews, I agree Cabrio is a bad product. What happened to the trustworthy, best value Whirlpool name?

My dishwasher is very basic with no extra amenities, more features like an area on the rack that would wash the inside of small opening glasses and jars and I do not like the way my silverware holder just balances on the front of the bottom rack and does not attach to where it doesnt fall off every time its bumped.

This piece of junk just broke down not even one year after the purchase. Every singe Whirlpool washing machine has broken one way or another. This one will set the wash time for 57 minutes, and exactly 24 minutes left in the cycler, you hear this big crash and then everything stops. Another dumb thing about this piece of crap is that when the problem happens, the POS keeps the lid locked so that you cant tell what the problem is. What morons would put a lock on the lid? Its not like someones going to take a jacuzzi bath!Restarted the POS again, and exactly 24 minutes left on the wash cycle, there was another crash. Both times, exactly 24 minutes. NEVER BUY FROM WHIRLPOOL!

Weeks ago, we received a new refrigerator from Whirlpool. Never really got down to temp. They replaced the compressor and still does not work. You would think a company like Whirlpool would replace it. That is a joke. They want to try and repair it again, another compressor? Now I have thrown out the food in it and feel like Whirlpool could care less. DO YOURSELF A FAVOR< DONT BUY ANYTHING MADE BY THIS COMPANY OR THEIR OFFSHOOTS.

Originally installed early 2007, the very expensive unit went crazy after about 14 months, with random beeping noises, and non-response to keyboard entry. Sometimes unplugging the unit worked. When unplugging no longer worked, the unit was repaired by replacing the keyboard logic boards only to fail again the same way.about a year later. It appeared the heat or steam from the cooktop below the microwave was causing the failures, so we became careful to ensure the fan was on. Last week, after boiling some water, the unit failed again, with error code F2H2, the keyboard error. Didnt Whirlpool expect the microwave to survive heat or steam from the stove/cooktop below? Overall, the unit is great when it works. Unfortunately due to the large size of the 2 cu ft unit, only an identical unit will fit. Im skeptical of replacing my broken unit with another Whirlpool Velos unless this keyboard problem has been fixed in new units. Anybody know if Whirlpool has fixed this problem?

I have had 6 months of absolute HELL working with Whirlpool. I mistakenly purchased a Whirlpool Refrigerator from Home Depot and the moment I did Home Depot were hands off. Sadly my brand new refrigerator didnt work from the moment it arrived. The ice machine was dripping inside from the back making all the ice freeze together and created an ice sheet below the ice box that can be taken out. There also was water dripping out of the ice output. The water output wasnt working and the water was literally trickling out when you pushed for water.SO Whirlpool took 6 weeks to send their 1st technician from L.A.R Services out of Boston and the guy turned up and said it was due to needing a new ice tray/machine and our sink having an old filter. There was NO filter on the sink! And he then ordered an ice machine that arrived at their office in 4 weeks but they took 3 weeks to try to deliver it. When they finally came out they called to say they had to turn around because the road was blocked- there are 3 ways to get to our home....so I had to chase for 2 more weeks to get them to come back out. When they arrived they handed me the ice tray outside and drove off!!!SO WE TRIED AGAIN and this time had Home Depot call Whirlpool to get a service person in to fix it. We had to wait another 5 weeks and when he finally came he claimed our issue was due to the fridge not being perfectly level. Well, guess what, its now level and the ice is still freezing into giant blocks, some weird plastic strap is hanging inside the ice box and the water is still trickling out.Ive called the service guy 3 times and he is yet to call back and right now Im on hold with Whirlpool (its been 14 mins so far). NEVER AGAIN will I buy anything WHIRLPOOL and I will be sharing this experience in every consumer space possible so no one has to go through what we have. Our new fridge is still broken after 6 months!! All I want is my GE fridge again and I should have a followed the reviews.

Our new home came with brand new appliances. I love our Whirlpool microwave. Its reliable, quick & has lots of great pre-programmed features to assist with regular. The independent timer is a total bonus too.

I purchased the Whirlpool Cabrio top load washer and dryer a couple of years ago and have disliked the washer from the first wash. I have followed the instructions on how to load the washer which, first of all, takes more time than any other washer I have ever had to load. Second, the clothes come out so wrapped around each other that its almost impossible to separate them. They are wrinkled to the point that the dryer cant even de-wrinkle them, and some have even been damaged. Third, the load doesnt smell fresh even though I have cleaned the washer as instructed. I agree with every negative review I have read on this product, and have been so disappointed with this purchase that I will never buy any Whirlpool product again.

Cabrio fabric washer and dryer sucks. I gave almost $500 for a piece of **. Doesnt get the clothes clean. Hell most of them dont even get wet. Its junk. Wouldnt have another one. Lowes junk and the dryer aint know better. Its always flashing check lint even when its clean and you have to ** with it just to get it to start.

Whirlpool Gold Refrigerator, #GI6FDRXXY07 ICE MAKER PROBLEM - Ever since we bought this ref in 2012, we have been facing problems one after the other. First the refrigerator was shutting off on itself thawing the food the ref & freezer. (When we were on vacation, in summer of 2012 , it was a disaster when we returned home.) This a continuous on going problem... not fixed. Second 2012 Spring the Icemaker shuts off spilling water at the dispenser, when called customer service they sent a technician who replaced the ice maker. But again the icemaker is spilling water or leaking now. Third 2013 Winter, the bottom freezer was leaking and ice buildup at bottom. We have been having problems ever since we got this. WHIRLPOOL YOU HAVE DISAPPOINTED US, its been an exasperating experience. Please Help, its not our fault for your poor design & faulty product.

I like the newer technology that is built into the washer. My only complaint is that the wash time is automatically set depending on your load choice. For instance, a delicate load is set to wash for 45 minutes. I dont feel that amount of time is required.

Our new Maytag (i.e. owned by Whirlpool) oven/range is a stainless steel pile of junk. It takes FOREVER to pre-heat. The range elements take FOREVER to heat up. And like others on here, the Aqua Lift cleaning simply does not work. We put the oven through 3 back-to-back cycles and only the bottom gets a little clean. What a scam.

The 12 year warranty, means nothing. The heater only worked for 30 months, and then its upper sensor fault code flashes, and the heater shut down. I called Whirlpool, and they have me use an ohm meter to help troubleshoot the problem. So if you are not handy, you are out of luck. They decided it was my control unit that is defective. They will send me the part free, but I have to pay shipping and installation. What a deal, and what kind of management would dream up of this. The heater is marketed as a 12 year warranty model (only on the tank). Would anyone, having been through this, buy another Whirlpool product?

I bought an adapter that I added to the kitchen pipe, drilled a few holes in my cabinets to route the hose and voila! It is small but big enough so it's perfect for me. I didn't realize it had an internal heater so I was moving the hose between hot & cold under the sink but now that I know. I will try the heater. The settings are complicated so you have to read the instructions fully. Before I read them I thought every load took 2-3 hours but they don't. I do like to use the heavy soil setting and that does take a couple hours, but if I'm in a hurry or the load is not that bad I use a shorter 50 min setting. For the drain hose I either put it out the window or put a screen in the sink & tie it to the faucet. You have to tie it down wherever you aim it because the water comes out with enough force to throw the hose. I had a couple incidents of kitchen flood before this stuck in my head, now that sucker is secured well. I intend to make a permanent drain to the pipe eventually but for now I just use window/ sink. This required a longer drain hose. For apartment use, I am very happy.

Do not purchase (Whirlpool products). Discuss guarantees with salespeople when purchasing! They are total sham and in fact borderline fraud! Purchased $5,000 dollar KitchenAid fridge only to have it breakdown after only 8 months. What they dont tell you is instead of recalling a product they give their repair personnel whats called a notice which means they know there are issues with their products!After much discussion and trying to return the product to no avail, I was told very adamantly my fridge would need to break down another additional 2 times before my fridge would be replaced with a new fridge. Forget about the cost of your food inside the fridge, they dont care! Just beware that their warranties and parts and labour are a complete and utter joke! My advice after much research if you can afford it buy Miele or Subzero product. Its more expensive but a lot less headaches in the long run! Ive eaten the cost of my KitchenAid appliance and went with a Subzero fridge. Dont believe the higher pressure sales pitch from salesman. Youre best to call a repairman and ask what hes fixing more often than not and 9/10 times he will tell you Whirlpool product! Customer service is a complete circus and gong show. Youll get further ahead talking to a donkey!!! Buyer beware! Whirlpool Canada/USA is a joke!!! Dont say I didnt warn ya!!!

My microwave is a Whirlpool WMC10511AW purchased in Jan 2014 for $150. It is very light weight and moves around when opening and closing the door. I have to use something behind it on the counter top to keep from moving backward and causing problems getting things in and out. In the first year we had problems with the door latch, but after a while it stopped being a problem. I am used to the stability of Amana Radarange so these very lightweight microwaves seem really cheap to me. It works fine at this point but it seems that these really inexpensive countertop microwaves have to be replaced about every 2-3 years where an Amana which costs a lot more lasts for around 20 years and are very stable not moving around all the time.

Whirlpool Duet 2009 Model WFW9400SW02 - Worst experience ever with a new Whirlpool front Load washing machine. It broke down with error codes F28, F70, F71 13th month just after warranty and was leaking water. Bought 1 yr 153.00 Whirlpool extended warranty. Many reviews in internet have same complaint. Immediately had it repaired after waiting my 60 days to use warranty, but did not work after the door latch switch and one of 3 main circuit boards was replaced which was over $600.00. That was 2 visits. Fired them and had warranty company send different repair Co. They came twice with a cost of $840.00 and worked for 30 days and then had no power. 3rd repair company came out and wanted $350.00 to order part. I was offered $1195.00 cash or $1499.00 replacement top of line Whirlpool WFL98HEBU. Nice! But only 1 year warranty and I had to pay 200.00 shipping. I decided to take the money since I did not want to risk the break down on the new washer. The reviews on the new washer were not favorable with break down as the main complaint. 4 repairs in 1 year is lemon law on my warranty. My repairs were 4 in 45 days.

I just bought a Whirlpool 50-gallon water heater from Lowes because my old one took a turn for the worse. I brought it home, installed it just as the directions said, and immediately got an FVS fault detected code as soon as I plugged it in and tried to ignite it. This is by far the worst experience I have ever had with an appliance. And wouldnt you know it whirlpool service center is closed on weekends. What an absolute piece of trash. Im draining it and taking it back ASAP. Lowes and Whirlpool just lost my business for good.

I guess I am in the lucky group because my washer lasted about 3 years before the problems started. The latest is the lid lock light flashing, the machine doesnt go through full cycle but stops in the middle, doesnt spin and drain. Even before that the clothes didnt come out clean. The repairman said that this product is basically disposable and it makes more sense to buy a new washer than to invest in fixing this one because something else will break next.My old White Westinghouse lasted 18 years without one problem, Im sorry I wanted something new. What a pity that companies nowadays sell junk and the consumer has nowhere to go with a complaint. Im wondering if someone has the name and the address of the CEO of Whirlpool, I would like to ship that piece of junk to where it came from... it would be funny if other customers did the same. And I agree with other posts that class action suit would be in order... too bad nobody started it yet. I wish I had read the reviews before I made the purchase but at least I know now to stay away from all Whirlpool products and do whatever I can to prevent other people from making the same mistake I did.

I purchased a Whirlpool French door fridge 6 years ago. In less than a year, it was not cooling and I was able to retroactively purchase an extended warranty which ended up saving me a ton. Less than 3 years later it had broken 3 times with three different part problems with a total down time of 6 months. Despite saying it didn’t qualify for lemon law, I was able to get it replaced after presenting all the facts. 3 years later, the new one is now currently experiencing the same problem and running a toasty 58 degrees and my food is once again in coolers on ice. Shopping for a different brand and I recommend you do as well. Whirlpool used to be a brand you could rely on. No more.

This French Door refrigerator looked beautiful. There are only two of us in the home. We purchased it at the end of 2014 and it just keeps getting worse. The front of each shelving has cracked. They look like they are dried out plastic the way it cracks. The drawer tracks have seem to keep crumbling pieces off. This is not a cheap refrigerator by no means, this is the first time buying Whirlpool, and I believe the last time.

Am posting in regards to a brand new dishwasher that I purchased the first part of February 2020 from Menards. The dishwasher I bought is Model # WDT730PAHB and Serial # F94519386. I had the dishwasher 10 days and it stopped working after running only two times. I checked the breaker box and all electrical connections to the machine and it was getting electricity, but would not turn on at all. I called the store to return it and they only have a 7 day return policy. Since then Whirlpool has been contacted and I have had two service calls from Whirlpool. The mother board has been replaced (which I waited two weeks for the part & five hours for a service man) and still it will not come on. Now I am waiting on a wire harness, ordered on March 4th or 5th and still not here. I completely understand wanting to fix a broken machine, however this was a new dishwasher that only worked for 2 washes. I have now been without a dishwasher for almost 2 months, which in light if our current world situation isnt a huge deal, however this is a time when sanitation is very important. I feel like Whirlpool should offer to replace my new machine with a new machine and not something that is refurbished. At this point it is costing more to repair this machine than to just replace it. Every time I call Whirlpool I get the line of we have to repair it. Give me a break. Take care of your customers!!?? #neverbuyawhirpoolproduct

I had the junky gas water heater for two years and cant keep the thing lit. Calling Whirlpool does no good. They give you the runaround; the store cant do anything. They know they have a faulty product and keep selling it. Some companies are only out for the money. If that wasnt the case, they would discontinue the junk. They will send you replacement parts but if you know nothing about them, you have to put out more money for someone to come and fix it. I would love to send them the bill! I would not recommend this brand of anything to anyone.

I have a Whirlpool built-in double oven. It is 7 years old. The top oven has overheated 3 times with food in it and it locks the door. The oven beeps and says, Too hot, and locks the door. Luckily I was in the kitchen when it overheated, so I could turn the oven off. After turning the oven off, the oven has to cool off before the door will unlock and the food can be taken out. By then, the food is really burnt.I called Whirlpool to see if there is a recall and they said, No recall, and the oven was out of warranty. So I called the repair shop. They said it was the control board and they were not sure they could get a new control board. I may have to find someone that can rebuild this control board. They said not to use the oven. It could cause a fire. I would think that they should recall these ovens. They should have a safety switch that shuts the oven off if it overheats like mine has done.

After happily using Maytag washers at my old address for 30 some years, I moved to my current address and in 2006 I purchased a new Maytag. In 2010 I needed service. I was advised it had a bad bearing and was not advised to repair as it would cost well over $600.00. I purchased a Whirlpool Cabrio top loading HE appliance.The Cabrio worked well until one day it made a horrible noise. Although it still worked, I called for service and was told it had a bad bearing and would cost $670.00 to fix and they advised against it. After the service call, it never worked again. I know things dont last like they used to but 4 years is ridiculous. I have been advised that Whirlpool bought Maytag. Is this what to expect from so called reputable companies?

After 2 years the motherboard failed on my Top load Cabrio washer. We had to spend $300.00 dollars to get fixed. When we called Whirlpool to see what they would do about it, they actually offered to sell us the board for $345.00 dollars and a 1 year warranty on the board. They actually wanted us to pay more from them than a local repair service. DO NOT BUY THIS MACHINE OR ANY OTHER WHIRLPOOL PRODUCTS. Also does anyone know of any class action lawsuits surrounding their obvious use of defective parts?

I had purchase a Fusion Supreme refrigerator (model 180). After some time, I found that the color of the refrigerator was faded and I very well know the color of the refrigerator was recolored. This is a concern on your prestigious brand’s image.

We purchased this one (Wall Mount Model # WMH76719CS) on July 30, 2015. About one month ago I started noticing that a simple large cup of water to make tea or instant coffee takes more than 2 minutes on power 10 to heat up enough. It used to take about 1 1/2 minutes. Now, Im no mathematician, but I believe thats about 25% power loss in 6 months. The same applied to any convection dinner Ive tried to cook lately. Im going to say that Im dissatisfied with the convection feature and would rather just bake the silly food in the regular oven as usual. Any planned-overs trying to re-heat is taking much longer as well as melting butter. I do not have much confidence in Whirlpool microwaves right now, and may never again.

We replaced our 20+ year old washer and dryer with a Cabrio set. I read the instruction booklet twice to make certain I did everything correctly. Ive washed two loads. Both times, the clothes were in a ball at the bottom of the washer. Everything was horribly wrinkled. DO NOT BUY this WASHING MACHINE UNLESS YOU want your CLOTHES to COME OUT in a WRINKLED BALL.

We have been having white plastic pieces shoot out with our ice the past two days. We have only had this fridge for about 15 months. After reading these reviews; I am assuming when I call the service will be terrible as well as any fees for them to fix it. I sure hope it is under warranty; or I will never purchase Whirlpool products again.

I purchased a 30 gallon gas hot water heater from Lowes in 2013. Within the first 3 months, it went out. I contacted whirlpool who troubleshot the heater 4 different times. Final contact was in early 2014, I requested a tech to look at the heater. Was informed it is now over a year old, it would be at my cost. Replacement parts $30. Shipping the water heater is great if you like cold showers. After a little searching, I find they know this water heater is junk as does Lowes but dont care.

I purchased this stove in September and I am very unhappy with the Aqualift. The service department said I would have to probably do the cleaning process about 7-8 times for it to really work. I find that very unacceptable would never recommend this to anyone.

Bought a standard 18 cubic foot top mount Whirlpool when moving into my first apt. The refrigerator cost a little over $500.00, is spacious and energy efficient. No ice and water in doors and no chip boards for any controls but still working perfectly. It is now 30 years old and never even serviced. When buying appliances get basic, do the job units and nothing with chip boards. They are still sold today and the fridge I have costs less now.

I have had my Cabrio for a year now and quite frankly, I find more satisfaction taking all of my laundry to a local laundromat. There is no soak cycle and when you have a kid in sports, that doesnt help. There is no agitator, and I am now convinced that they were originally in all washers for a reason. My clothes have all worn out and are shredding, not to mention my very expensive bath towels that I am now cutting into rags. This was the worst purchase I have ever made in my life and will never even look at a Whirlpool again. When I bought my house, I had a Maytag that was 35 years old and it did a better job than the new Cabrio. Should have stuck with that brand!

Piece of crap! Approximately 18 months of aggravation. Clothes don’t come clean, leaves residue on them. Just absolutely the worst experience I have had in six plus decades of doing laundry. When next I get a washer...it won’t be a Whirlpool or anything made by the company. There should be recalls on these washers.

My wife and I spent about $2500 on a new Whirlpool Dutch Door fridge five years ago. 18 months later the evaporator went out and the warranty was only good for one year! We bought an extended warranty, got it fixed and the other evaporator went out less than a year later after that! Next, the circuit board control on the crisper went out. Then, the water filter would not disengage and a repairman had to take the fridge apart just to put in a new filter! And now, the ice-maker has gone out and the fan is icing up like another evaporator is going... Insane! Our warranty is up next year. Once the warranty ends we will start shopping for another unit - and it wont be a Whirlpool - thats for sure. I have never owned anything this unreliable in my entire life! Also, I would say most of the time we have owned this piece of you-know-what it has made a loud disturbing fan noise... What a waste of good money! Run! Run far, far away!!!

July 2017 I purchased a Whirlpool refrigerator Model # WRF757SDEM00 S/NK51709722. The refrigerator portion went out, the repairman said it was the fan therefore I spent 351.00 dollars for house call and fan. When that did not work the repairman spoke to whirlpool and they said the panel of small computer may go out with it 212.00 plus tax. Did not allow that and tried another repairman who said the value that switches from freezer to refrigerator was out and if I could find someone to fix it would cost between 600 and 800. I went out and bought a Samsung because on the front said 10 year warranty. At least anything is better than 1 year whirlpool offers. There is NOTHING in the name.

Rather than replace the heating element in my 15 year old Sears dryer, I opted to replace both my Sears washer and dryer with a new HE Whirlpool. It was the biggest mistake that Ive made. The washer does not have an agitator and the clothes turn into a twisted knot. Deodorant did not wash out of load of three sweaters. When I called tech support, the woman told me that the washer met specification. I suppose that means that it uses only limited water but has nothing to do with the cleanliness of the finished load. I was told by the repairman that future calls regarding unclean clothes would cost me despite a warranty that I purchased from Lowes.He suggested that I wash on using the Bulky Items setting and with a specific laundry soap. The setting provides more water but without the agitator, my clothing turns into a huge knot and comes out of the machine dingy despite washing loads for over 60 minutes at a time. My electric bill has gone up because I have to also add an extra rinse. The machine frequently become unbalanced. My dryers seal started loosening up two years after my purchase and finally became twisted in a sheet and ripped itself loose. Whirlpool has lost all future business with me.

2 years ago, we remodeled our kitchen. We replaced with all Whirlpool appliances. WHAT A MISTAKE! Our ice maker went crazy 1 month ago and now our dishwasher almost caught fire Memorial Day weekend while we were away! Thermal Fuse and stainless interior prevented us from losing our house to fire but really Whirlpool, you spend that kind of money and all appliances are breaking before theyre even 3 yrs old! My husband is very good at fixing things but when he diagnosed dishwasher, he said he has to find a way to fix wires in control panel because melted insulation. Now I am afraid of it. So if you purchase Whirlpool, expect maybe 2.5 to 3 yrs service and think of them like a disposable lighter, use it and throw away.

When the fridge is running and there is a power loss of about a second or so, the fridge shuts down and will not restart (even after hours). I have to unplug it for a minute or so then plug it back in; it runs fine until the next very short power failure. When we are out of town for a few days and that happens, we come home to a fridge of ruined food and a mess. I have contacted Whirlpool (2 times) and they were no help at all. It seems to me a software change could solve the problem, but they are unwilling to listen.

My washer is a top load, energy and water efficient model. I am amazed at how little water it uses and how well it cleans. I do have two issues, the capacity looks huge but it will not take a queen size and double sheet set in the same load. It unbalances and then cant seem to get going again. The other issue is that you cant pause the wash and adjust things, you have to cancel and start over.

When renovating my kitchen I went with all Whirlpool appliance. I have nothing but trouble with my fridge. About a year old we had to replace the motherboard at our expense. After having that done, about 6 months later I had to defrost it so it would work again. Now it has to be done every month. All they say we can book another service call at my expense again. All I say thank goodness I kept my old Frigidaire. It saved me more than once. So my advice is stay away from Whirlpool. They dont stand behind their products from my experience.

I brought a Whirlpool refrigerator on 2/15/2020, French doors. Bottom freezer. I have had issues with the bottom freezer from day 1!! Ive had gaps in the gasket seal and air was coming from the freezer. This happened 3x. Now there is a build up of frost and ice. STAY AWAY!! Ive never had any issues with Whirlpool until I purchased this updated refrigerator. I should have stuck with my regular top freezer refrigerator. No issues!!

I bought Whirlpool Dishwasher from Lowes. This is just 2 years old. Model number is WDTA50SAHZ. This is gently used Dishwasher. Suddenly it stopped working. After water fill up, dishwaher is not working. I thought whirlpool is superb brand. Now its waste brand. Do not buy whirlpool dishwasher.