Whirlpool Du1100xtpb3 dishwasher: The spring on the latch keeps coming off (3 times in two months). The service repair man charged me for replacing the latch when all that was wrong with it was the spring. That being said, now we are fixing it ourselves. For your information, there is a paper in the bottom of the dishwasher that tells you what is wrong by how the lights are flashing. So each time we replace the spring, we have to reprogram it by pushing a sequence of buttons. Still, I cant figure why the spring wont stay on. Help me if you can.

I have use Whirlpool washers and dryer for years. I had Washer and dryer that lasted me 20 years, even when I thought they were going out I had purchased another set maybe two years before and they were still running so I left them in the house I sold, I would recommend Whirlpool to my friends and family.

I bought a Whirlpool High Efficiency top load washer. It does not get the clothes clean. Dark clothes come out with spots all over them. There is not enough water to rinse out the dirt. It is left on the clothes in spots. I have to take my clothes to the laundry mat to wash them to get them clean. I am 74 years old and have used Whirlpool appliances all my life. I have dt3 rental houses I keep Whirlpool appliances in. But I wont be buying any more. I had to call the repair man one month after I bought it. He had to recalibrate the machine. If all you want to wash or maybe rinse out is a pair of slacks or a shirt, it might be o.k. but not a load of dirty clothes. It is just a JOKE.

Whirlpool WRS965CIAM - Consumer beware is what weve learned. Whirlpool has apparently not monitored the hundreds of complaints about this particular refrigerator model. Its sleek and pretty and has a ton of features and I was very excited about purchasing it. We havent moved into our home yet, but turned the refrig on the next weekend after closing, started painting rooms, even had some nice ice water. I came back next day to a very large amount of water all over my hardwood floors. We are talking bath towels. Who would know you are supposed to call Whirlpool directly? We sure didnt. We called Hart Appliances, where we purchased it from. They gave us a number to call for service on Monday. The repair guy came, didnt have what he needed, so he came back later in the afternoon and fixed it, until we came back next morning and the floor was again flooded... Again, we are talking bath towels. I called them back and was told it needed a part, that took 4 days to come. Its here today but they are not coming until Monday to fix. Customer service at Whirlpool has no record of calling out a serviceman. They wont have info until problem is fixed. According to folks on the internet sites, that could be months or never! Okay, ladies... am I ever going to trust that this refrig will ever be fixed? I wont dare go away for a weekend without fear it will leak all over my floors and ruin them. We were going to purchase a chest freezer and small full fridge for drinks and overflow to keep in the garage. Instead, thats where this fridge will end up. Expensive lesson learned. Whirlpool doesnt replace brand new, out of the box, defective refrigerator. Whirlpool also doesnt admit there are complaints out there... Customer service person told me she had no record of complaints... I said when we get off the phone... GOOGLE WRS965CIAM and you will be amazed. My next complaint is going to Consumer Reports. We bought the magazine and followed the advice. Id like to think we just got a lemon, but there are too many complaints out there for that to be the case!

I absolutely HATE this washer! These pics are of jeans AFTER they came out of washer. Its energy efficient for sure...doesnt use enough water to fully wet the jeans. And, yes, I know how to choose the correct settings. See how wrinkled the jeans are? That is what all clothes look like after being washed in this washer. Dryer isnt any better. It does dry them, but they are so wrinkled they look like they were just pulled out of dirty clothes hamper. I was a Whirlpool fan up until this set. I realized before my 30 days were up that they werent cleaning my clothes well. I went back to Lowes & set up a date & time for them to be picked up. Salesman convinced me that I just wasnt use to this new type of Whirlpool washer/dryer. Plus he insinuated I was being a problem customer who was lying about the poor performance of my set. He said they had sold a lot of these W/D and NEVER had a complaint. Dummy like I cancelled the pick up. I would not take another set of these if they were given to me. If I could afford it I would give away this set & buy something else. Anyone still interested in Whirlpool Cabrio W/D after reading my review? If so, Ive got a set I will sale you for what I owe.

I have a kitchen collection of Whirlpool products, not even 2 1/2 years old. I have had nothing but issues. Microwave was completely rebuilt within few months, refrigerator and freezer multiple issues. Latest is the freezer stopped working, now my good is ruined!!! Wont always make ice in the icemaker. Already had to replace freezer door because it was warped and the seal didnt work and now my dishwasher isnt working!!! **!!! I waited 20 years for a new kitchen, finally got one and did extensive research thinking I was safe with whirlpool. I was wrong. So now what, what happens when the warranty runs out, Im screwed. Shame on you whirlpool for putting out crappy products and doing NOTHING to try and fix this!!

I purchased my Cabrio Whirlpool washer 4 years ago and have had problems every since I bought it! Thank goodness I bought the extended warranty! The last two repair bills were over $1000 each! My warranty just ran out and I had it repaired last two months ago! This is not my first complaint! When will they start listening to consumers? This is ridiculous! Now I am faced with the problem of just trashing this washer or spending another $1000 to repair it! Something needs to be done! I am warning all of my friends and family and will post again my problems with this washer on all my social networking sights! Whirlpool needs to take responsibility for their problems! I will never purchase any Whirlpool products ever again if they do not assume responsibility!

I purchased a 40 gallon water heater at Lowes and installed about 3 years ago. A couple of weeks ago, it got an upper sensor failure code on the gas valve. It would heat by resetting (turning valve off, waiting a minute and then lighting) but after a few minutes, it would fail again. I called the customer service and they mailed out a new upper sensor. When it came a few days later (I paid for shipping), I installed it but the same failure code. Again, the only heat I could get was by resetting the valve several times before a shower. I called customer service again, told them what I did and they said, Oh, the problem is the gas valve then. So they mailed out a new gas valve unit. It then came a few days later and I installed it according to the enclosed directions to the letter. Still got the failure code and still had to keep resetting it to get any warm water before a shower.I called customer service again, told them what I did and he said, Well, did you flush the water heater with apple cider vinegar before you installed the new gas valve? I said, No, it wasnt in the enclosed directions to do so. He said, You should have done that and it would have worked. I will send out a new gas valve. At this point, I blew up. Two weeks with no reliable hot water. I told him I want a new water heater and he refused. I asked to speak to his superior. He said no. Dont ever get a Whirlpool product. Some other crappy company builds these turds.

Bought washer just under three years ago and the tub bearing started to sound like a jet airplane. Whirlpool seems to have an ongoing issue with the tub seal which goes bad and then allows water to enter the bearing which then fails. Whirlpool will not make it right, I guess I will have to plan on a $350 repair every two to three years if I keep this machine. I am very disappointed with whirlpool for not standing behind what is a known problem. They should replace these seals under warranty so that the Bearing does not fail. Thats my opinion, recall the seals and fix a bad design problem. I would not recommend ANY whirlpool products to anyone at this point. What other problems do they have with their other products?

My Whirlpool Cabrio Washer is only 4 years old. I have had balancing & spin issues since day one. Thought it was just me. Constantly had to drain and spin after rebalancing. Now 10 days ago it cost me $250 to have it fixed. The aqcuator (?) Went. It wouldnt spin out. Now 10 days later it stops again. The appliance guy reads code. F7E7. He tells me the bearings are no good. Will cost another $400 and they need some special tool to fix it. IM DONE. My last set was 15 years old. The price is ridiculous and quality not worth what this triple capacity set cost.

I purchased a small dorm size fridge from Target after our electric went off and was gonna be off for a while and we purchased this to run with a generator and its 110 power also but this is a super little fridge and I would definitely would buy again.

We purchased a Cabrio top loading washer (WTW6400SW2) and a Cabrio dryer (WGD6200SW1) in 2007. From day one the washer has tied clothes in knots, never cleaned the clothes properly, and sputters the detergent and bleach unevenly. The fabric softener dispenser clogs up too, rendering it useless. The knotting of the clothes leaves them so tightly wrinkled they come out of the dryer very wrinkled. The water level, determined by the washers self-sensor that weighs each load, does not fully submerge the clothes. The manual says this is normal operation for this model and that it will not affect the cleaning process. Wrong. The small agitator is insufficient to clean the clothes but does a wonderful job of twisting them in long, tight knots. I want to kick myself every time I walk past the washer for paying so much money for such a poorly designed washer. I was very sick when they were first delivered and wasnt able to do much laundry. By the time I was well enough to do more with it, I noticed the clothes werent getting clean and were actually being damaged by the washers process thanks to uneven detergent distribution/spotting from the clothes sitting above the water level, and being poorly agitated and rinsed. Before I knew it, my warranty had expired. It was a very hectic year. Ive been very sick. We purchased it from Lowe’s. I had their techs out a time or two to check it in the beginning, but they always smoothed it over with some waffy, generic explanation. Eventually, I was past my 30-day trial period. I was on my own with Whirlpool, whod refer me to the manual and make me feel like I just had to get used to the new technology of the self-sensoring washer. Ive read that Whirlpool is aware of this issue and doing nothing. Ive read other complaints that describe the same problems I have and its obvious this is a design flaw. I appreciate these posts because I least I dont feel like Im insane anymore. No, just horribly ripped off by Whirlpool.

This is a defect due to the removal of the dispenser heater being removed. The insulation is inadequate behind the ice/water dispenser (@ 3 feet from the bottom of the door.) Replaced the line, thawed it out multiple times, added extra line under the fridge in the coils to try and warm up the water in the line between the 90 degree elbow connector and the dispenser... no luck. Since all the manufacturers models are being assembled in Mexico, using the same designs, other models are have the same issue. GE is backing theirs with a replacement freezer door. Well see if Whirlpool backs theirs. This whirlpool Gold is @ 3 years old and the issue started around a year ago.

In 2010 we had to purchase a new hot water heater. Went to our local Lowes store to see what they offered. We decided to buy a Whirlpool energy smart electric water heater. It was large, 50 gallon. We have a large family and didnt like running out of hot water so we thought this would be great. Worked fine until yesterday when I kept smelling an odor like something melting. Could not figure out where the smell was coming from until this morning I got in the shower and had very little hot water. Went downstairs and seen the water heater was not working. Got the user guide out to see if we could pinpoint what was wrong. It said no power to control board. I checked the breaker box and found no problems. I got a flashlight to look at the control board and discovered it had overheated and melt the top of it. Have been on phone with Whirlpool nonstop with just a recording. The heater has a lifetime warranty so Im trying to get the replacement part for it that will cost me $115 plus shipping. I am really concerned that with this overheating it did not trip the breaker. Grateful it did not start a fire and worried if we repair it will this happen again and possibly not be as fortunate. I have seen on this site of another complaint with the same problem. Shocked there hasnt been a recall issued. Be careful!

4 year old gas range, used self clean mode yesterday, for first time, upon completion opened oven door, not very clean and found 1/2 moon shaped raised crack in center of oven floor. Customer service insisting repair tech must come at cost of $60.00 to determine cause. I believe this is manufacturing defect, that they are not willing to admit. Offered big discount on new range. NO MORE WHIRLPOOL FOR ME!!!

We bought a Whirlpool gas range about a year and half ago. The oven started giving lighting problems we had to light with a match every once in a while. Then the broiler igniter started giving same problems so I replaced the igniter, still did not work. Then I tried the control panel, still nothing. The igniters were about 45.00 each. The control panel was 250.00. Then I replaced the spark module and it is now working. Some models the spark module dont control oven and broiler but mine does. That was 200.00. The best thing was the part place I was ordering from would exchange the parts that you try and they also can answer questions either online or by phone, Appliancepartspros.com. My oven model # is wfg371lvs3.

My fridge is over 10 years old and the compressor has not failed. I have replaced some of the bins that have cracked or been broken over the years. It is a side by side in black color and will probably replace it with another type but the same brand as long as it is economically feasible to do so.

Bought a commercial coin operated Whirlpool washer on 4-18-2015. As of this date machine has not been used that much, the electronic part has gone haywire.All lights on and shows the door lock (which is not) disconnected, nothing changes when I put it back. Contacted Whirlpool technician, have been told that this is a defective model. He has apparently had several service calls that are new machines and they are all the same issue. Told to contacted Whirlpool, Whirlpool playing dumb. I have several other older Whirlpool commercial washers and dryers, never had issues. I guess they are doing shortcut garbage machines. Also, the interior of machine is less sturdy than the older models. Will not buy any Whirlpool products again. They do not stand by their products try to tell me that they are not aware of defective machines. Cheaper to play stupid!!! Disappointed with their lack of standing by what they sell!!!

I have owned my Cabrios for over a year. They have given me no problems at all! I keep them cleaned with Affresh, even though Ive never ever had a smell in them. Also, I have never ever had my washer or dryer not do its job!! My clothes are fresh as a daisy and clean. I bought my Cabrios because my father purchased his first set and raved about them. So, I used his to try them out. Absolutely wonderful machines!! You get more area without those crappy agitators in the way for one thing. Always fresh water, not washing in the same filthy water, yuck! It wasnt but maybe 4 months later for our new house that we got our Cabrios. I insisted on them! LOVE LOVE LOVE my Cabrios!!!

Just bought a Whirlpool stove (WFE540H0ES) from Home Depot. Oven gave off so much heat around the handle that I burned myself opening the door... Tech came out said it wasnt supposed to do that. Called into Whirlpool to get clearance for a replacement and corporate says no to the replacement because that is normal. Thats BS! If that is normal DONT BUY A WHIRLPOOL!! BTW... They are owned by Maytag.

After having our refrigerator for a few months we noticed rust on every stainless steel panel on the front of the unit (6). After customer service sent a technician to look at the unit nothing more was done. I was just told to try and scrub the rust off.

This refrigerator was already part of the appliance package that came with the property. I dont think if I had a choice, I would choose this brand. The stainless steel finish has rust spots, the top shelf has cracked and it is less that 5 years old.

My WTW4900BWO failed after about 2 1/2 years. Out of warranty, but I called Whirlpool Customer Service and was initially delighted that they offered to sell me a repair warranty that would cover the repair of my broken transmission. Was told that through AIG Insurance, I would have a repairman at the house tomorrow to repair the washer. A few hours later, their contracted local repair service called to try to push appointment back a day but I refused since I was told my washer would be repaired tomorrow. They showed up the next day in a old faded van, diagnosed the problem and then told me they would have to get authorization and come back in 3-4 days. A couple of days later I received a voice mail from AIG saying that since the cost of repair was more than the cost of the premium, they were canceling my policy & would refund my money. So a week later I still had a broken machine and no solution other than buying a new one or paying the cost of a new one to repair. Moral of the story: Whirlpool builds unreliable washing machines (and water softeners) and their customer service will promise you a repair that may not happen. Dont buy Whirlpool, but if you feel compelled, you better buy an extended warranty and cross your fingers. That said, we always had purchased GE appliances and never had a problem.

GFG461LVT2 - In October of 2010 I purchased a Whirlpool Gold Fridge and Stove. Its been about 3.5 years and two of the caps that go on top of the range burners are chipped. All of the caps are badly stained and despite the manual instructions to wash them in mild soapy water, they do not come clean. They dont come clean using heavy duty Easy Off cleaner. In addition, the seal on the oven door has apparently failed because the glass is foggy on the inside. Today I phoned Whirlpool after going to their website. I first spoke to a parts representative who advised that I would have to pay $47.00 per cap or $115.00 for all five burner caps. I was transferred to another department as I thought I should get the appliance parts and door fixed for free. The appliance is only 3.5 years old. I was told that the appliance is only guaranteed for 1 year and I would have to pay dearly to remedy the two problems. This appliance is Whirlpools Gold series. It supposed to be top-of-the-line - the price tag was certainly top of the line. Im very disappointed in American workmanship and the companys lack of integrity. Not too long ago I purchased a Whirlpool (aka Maytag) front loading washer. I now own a Samsung. The point is that designed obsolescence will force consumers to purchase products made outside of the US because some of us cannot afford to buy or repair appliances, cars, etc., every couple of years.

When I first got my energy eff washer it would not fill up with water. Only about 7 inches or so. Then I read that is you wet some clothes first it goes on wait before it starts. Works excellent with the agitator. Have done clothes without detergent and everything comes out clean. My beef is there is no lint trap so rely on the dryer to get rid of it.

Our son-in-law bought us this Range. Before it was even a few months old the oven handle melted off, we called Whirlpool they sent a repairman to fix it. Now it is three years old, the same exact problem with the broiler handle. There should be a recall on this part, why in the world would a manufacturer use plastic for handles to begin with. Yes I can replace the part myself for $37.57 plus all other added fees but its not right nor fair when its a faulty part to begin with. My one and only new stove is actually a pain.

Purchased a new Whirlpool washer and dryer at Best Buy 6 months ago. We complained to Best Buy and Whirlpool about our clothes not getting cleaned. In other words, my clothes are coming out of the washer dirty. My make-up towels come out with make-up, my husband’s fishing clothes smells like fish and my son’s bike riding clothes is full of dirt. Whirlpool’s answer was the technician is reporting that the machine is working fine. Whirlpool told me to use different cycles and detergent etc. and I have done everything they ask, but my clothes are still the same. I told them this is a defected item. A washer should do its job - wash dirt and smells out. I want a different washer and they refuse to exchange this item for another washer after a second call to technician. Best Buy is telling us there nothing they can do for us. What has America come to? The manufacturers and dealers are selling to consumers and taking advantage of them by not responding to the needs of the consumer. In other words, we the consumers pay for product, take time from work and personal time to reports these problems and we get nothing back, just the run around. Is there something we can do? What can we do? This is very frustrating. We work for what we need. We pay for what we need and we dont get what we need. On the other hand, the manufacturer and dealer get what they need, our hard working money. What can we, the consumer, do to get our hard working money worth????? If anyone knows, please share your experience.

Whirlpool WRF 990SLAM00 - Im 62, I have owned, and my family has owned a number of refrigerators and never have had any problems. I have been used to my refrigerators and major appliances lasting 15 plus years without any problems. I mostly bought Maytag washers and GE kitchen appliances. I had trouble with a GE dishwasher, out of warranty, but GE was very nice about it and came out and fixed it at no charge, then replaced it for free when it failed again. (No new problems in 4 yrs.). Then I made the big mistake of going with Whirlpool products in my new house in Florida, where I live half the year. What a mistake. First there was the Cabrio washer. After 1 yr and a week, It would not go to the spin cycle. I called Whirlpool, they said, Sorry, out of warranty. I told them, I only live in this place for half the year, so I have hardly used the machine. The Whirlpool person said, Sorry out of warranty. I asked for a supervisor and they were worse than the first person. The attitude was screw you, you should have bought the extended warranty. I called a repairman who fixed it for 150 dollars. During the spin cycle it gets really loud, but at least it works. Then the refrigerator. I arrived back in FL and the 1.5 year old refrigerator was not cooling. I called Whirlpool and said I needed a repairman. They said, Out of warranty, you can buy an extended warranty for 345 dollars. I said, No, a refrigerator should not fail at 1.5 years, send a repair man. He was great, but said the unit had a Freon leak somewhere in the box that was un-repairable. He told me, You need a new refrigerator. I will now call Whirlpool and see what they will do for me, but I expect little based on my experience with the washer, and others comments above. I will go back to all GE products after this as at least they seem to stand behind their products. Oh, and since Whirlpool now owns Maytag, as Whirlpool owns them now. Sad.

My family purchased a Whirlpool Cabrio washing machine approximately 4 years ago. The first two years were fine. I had no issues out of the machine at all. The last two years (just as my warranty expired) have been terrible. It was serviced twice just before the warranty was up and my husband has serviced it twice since. On two separate occasions, the bearings have worn-out and the bottom seal leaks water all over my floors. I would never recommend one of these machines to anyone!

In 2007, I purchased two 30 gal. Whirlpool Flame Lock water heaters (Model: FG1F3030T3NOV) from Lowes for two different homes that I own. I started having trouble with one of them after about two months. I replaced the thermocouple several times, with each one working only about a month. After that, Lowes replaced the complete burner assembly and that, so far, fixed the problem.Now, the second one has (1 Oct 11) gone out. The local Lowes told me that they are out of the burner assembly for this water heater. I called them this evening and was told that they didnt know when they would have the part, but to call back about every other day to see if they had received the burner assembly for this water heater. They said that it could be from two days to two weeks before they may receive this part!In 2008, I also purchased a 40 gal. Whirlpool Flame Lock water heater (Model: BFG1F4034T3NOV) for my house and no problems so far. In 2007, I even recommended that a friend of mine purchase and install one of these in a home that he owned. He did. I helped him install it and it later had the same problems! I am now needing a water heater for my workshop. What can I buy thats dependable?

Whirlpool Cabrio washing machine: The washer was purchased in March of 2012 and malfunctioned in December 2014. After phoning Whirlpool, the machine was scheduled for repair with a factory-authorized company. The first repair attempt was unsuccessful due to a lack of parts. It took 10 days for the parts to arrive, and another unsuccessful repair attempt was made. The verdict is that a new motor control board, costing $350 plus labor, is necessary. With the delay in service and cost of repairs, I may as well buy a new machine.

It was a complete nightmare buying our all side by side stainless steel freezer and refrigerator. Freezer still working fine but the refrigerator started blowing hot air, all the food spoiled within 2 days as we were trying to figure out what was wrong. The store did the best to correct the problem and it seemed the Whirlpool company had no faith in their product as over the phone recommended having extended warranty. So sorry we bought this product, nothing but hassle!!!

I purchased a Whirlpool Refrigerator in January 2014. When it was delivered it had a dent in the left side door (the door with the controls and ice-maker). I reported the problem to Whirlpool and they told me that they would send a new door and would have a third-party technician install it. About a month later, February 2014, the door arrived, after calling the technician; he came out and attempted to install the door. The door would not fit! Called Whirlpool and they told me that the refrigerators were produced one at a time and that they would have to manufacture a new door. They promised the new door sometime in May. In the meantime, I have a damaged unit and I need to store this huge box for months. The refrigerator works fine to keep the food cool and the ice and water features work well. The ice-maker is a bit noisy but it only operates occasionally.

Purchased Whirlpool clothes washer Cabrio Platinum about one year ago. Never sufficient water to clean items. Appears that there is no way to add additional water to ensure that items are cleaned. Many items come out dry and still soiled.

I opened the door of my Whirlpool oven purchased last year and pulled out the rack to remove my food and the rack completely tilted towards me causing the food to fly out of the pan into the oven bed with juice and barbecue sauce falling between the storage bin and the floor. This could have easily poured out on me. The rack support is not strong enough to support the weight of the food pan.

I decided to buy the Cabrio. It was the most expensive, but I wanted to buy American, and I liked the set. It does not do great with cleaning the clothes and they smell when they come out of the washer. Do you have any suggestions. It does not fill with enough water even when using the deep water mode. Please help as I would not recommend this. I called Lowes where I bought it, and they said they knew, but are not recalling, or making any adjustments until Whirlpool does.

Everything comes out clean and it doesn’t cause items to be tangled around each other. It has a setting for every possible type of load. I especially like the option of having “deep water”. Not having a “glass” lid is a plus.

I purchased a new Whirlpool 3.6-cu ft Top-Load Washer (White-On-White) Model #: WTW4800BQ from Lowes on 11/1/14, which was only 3 ½ years ago. The washer began making noise during the spin cycle so we called for service. The technician claimed that the bearing pack needed to be replaced and the repair would cost $400. This amount is $20 higher than the amount I paid to purchase the washer. Because the warranty is only one year, I contacted Whirlpool today and spoke with a representative. The representative said they could repair it under the warranty. When I asked how to proceed, she then asked me if I had an extended warranty. When I replied that if I had an extended warranty, I would be using it. She declined any assistance. I now have to purchase a new washer after only 3 and ½ years. I own 10 rentals. I promise that none of them will ever include a Whirpool product again.

We bought a Whirlpool refrigerator in January at Home Depot. In July we started noticing that the freezer doesnt work. The ice maker doesnt work, everything melt away. Frozen items were lost. We constantly have to dry the floor since it is leaking water. We called whirlpool on July 27 and they send someone to check it out the following day. He reported that we need a new freezer door. I call for a follow up, I was told that it will take 6-8 weeks before we get a new door and part for the ice maker. We recently called to follow up on the status of the door just to find out that the order didnt get process until mid August. In the meanwhile, the fridge is having condensation. Water is everywhere inside. Fruits are being rotten because of too much moisture. We called again and they send out the same technician. The technician reported that the fridge will not work properly until freezer is fix. We call whirlpool again just for them to tell us to wait for the part, and gave us an extra 6 month warranty.

Size was greatest consideration, then cost. Next was power consumption. Quality claims were of no value, since ALL are made in China/Korea. Korean made would be a better choice than China. Am satisfied, but not greatly, as refrig. bottom freezer died a few days out of warranty. YouTube video had my exact refrig. so fixed it myself. Bottom freezer drawer keeps coming off its slides, but I live with it. Top refrig. section freezes things on top shelf, but 2 and 3 shelves down, temp is 39 to 42 = cannot get even temp. As a former inspector, I know about air circulation, crowding.

At after 4 years of use, my double door refrigerator is giving cooling problem. Upper refrigerator part has excessive cooling and lower part has no cooling... after complaints in customer care, engineer was sent who changed the part that regulates auto cut... it gets blocked by ice so cooling air is not reaching lower part. Once changed exactly after 5 days same problem started... In spite of complaints no one came to check for good 2 wks. After long fight, it was defective board that was changed again. After 3 days same problem again, board was changed... Now after 2 and half month same problem. And now today service center has replied that engineer will be sent after one week.

I bought a house 2 years ago that came equipped with all new Whirlpool kitchen appliances (refrigerator/freezer, stove top and dishwasher). A few months ago, the damper door in our refrigerator broke causing food in the refrigerator to freeze. Just the other day my Whirlpool dishwasher stopped draining properly. Both instances a repairman was needed and were now out over $400 for repairs and parts. I would definitely not recommend purchasing any Whirlpool appliances and I am deeply frustrated that Im having to deal with these repairs and costs for appliances less than 2 years old.

We had to have a sensor switch installed. We purchased this washer, plus the matching dryer June 10, 2010. This was just 16 months ago today.The cost of this repair was $160.24, for part labor and service call. The service call was excellent. Wish I could say the same for washer.We had previously owned a KitchenAid washer for over 20 years (before purchasing Whirlpool washer) and did not have to have one repair on it. Very doubtful I will purchase another Whirlpool.Looks like quality is a thing of the past.

Not digital. Was supposed to be a quiet running machine but it really wasnt too quiet. Its cycles were well timed. Was supposed to be energy star certified, but I have to say that I felt it could have been more efficient. It was a new dishwasher in 2007, but we sold our house & moved since then & currently we have no dishwasher. :( If I had to choose, it would be a Whirlpool, GE, or LG. Easy to use even though not digital. Hot dry or air dry, plus several cycles to choose from. All easy to maneuver through. Standard size, fit under countertop, replacing an older one. I do have to say that it did stick out slightly farther than I would have liked. It was black & easy to clean. The buttons & knobs were black as well. It fit in well with our newly remodeled kitchen. It replaced an older dishwasher that had given out. The dish racks in it were spaced great & the wash ability was great - you didnt have to have an empty space in the middle of the racks which provided more space for dishes. It was also large enough on the bottom rack that I could fit pots & pans in it, even cookie sheets. Many dishwashers dont allow for this. The one thing I would have liked better is if the silverware rack was in the door, once again providing even more space in the rack for dishes.

The Whirlpool microwave has been very reliable and efficient. I like its multiple functions, from heating up leftovers to defrosting meat and poultry, baking potatoes. All the functions are easy to use.

Just like a lot of other people, I bought a Whirlpool hot water tank because of the good name. And just like the other people, my tanks pilot light will not stay on, it will be on for a few days and then you get up and no hot water.

I work on Whirlpool refrigerators for a living every single day of my agonizing, miserable, lousy life. Ive never seen such a mass of dysfunctional, defective rejects as I have with the new Whirlpool side-by-side refrigerators. The ice maker never works because the water line always freezes in the door. The food in your refrigerator side will either spoil or freeze because the damper door will stick open or freeze shut. The water filter housing will start leaking before you change the filter for the first time because of the inferior quality of the plastic its made from. And of course my all time favorite the compressor will always go out under the first 5 years (Thats why Whirlpool changed the warranty from 5 years to 1 on the sealed system). Ive never been a big extended warranty believer. But, like old saying goes, They just dont make them like they use to. Definitely applies to Whirlpool refrigerators.

Purchased a Whirlpool washer 14 months ago... however just unboxed the washer. Installed it in our new home. Now after just two, repeat, two months of use, there is water all over the hardwood floors... The front door seal is gone to the tune of $100 but what about my floors!!!!!! Im so discouraged after reading all the complaints that Im falling out of my chair. Seal design has been the same on most all their front loaders. DO NOT BUY A FRONT LOADING WHIRLPOOL WASHING MACHINE. YOU WILL BE SORRY YOU DID. Yes they look pretty. My parents old top loader washer lasted over 35 years without a repair and we washed clothes for four people.

I have a Whirlpool Cabrio washer and dryer combo. Recently, I have learned that the washer has a very common problem with the water pump. I have read amazing amount of complaints about this problem and apparently the company has nothing to say about this. The cost for parts and labor for replacing this pump is about $400.00, almost half the cost of the unit. This is unreal!

Our 4-year old Whirlpool microwave suddenly stopped heating. We thought that we forgot to push something so we tried again to start it. This time, it started to spark. We bought a new microwave oven and foolishly bought another over the range Whirlpool microwave. This was about 1 1/2 years ago. The second Whirlpool microwave oven stopped heating as well. F7 came up on the controls which meant that the magnetron failed in this second microwave as well. We called Whirlpool and they said they would only repair it if we paid for the repair which would have cost almost as much as a new microwave and maybe more if other parts were involved. Next, last year, 2012, the pump on our Whirlpool dishwasher broke and once again, it was too expensive to repair it. We had to buy another dishwasher so we bought a Maytag, not knowing that they were made by Whirlpool. I guess we will have to wait until that guarantee is up before that also breaks. Also, last year, our Whirlpool washer pump broke and that cost us a few hundred dollars to repair.From the complaints that I am reading from people about their Whirlpool appliances, it is seems that their products are made to last just until the warranties expire. We should start a class action against Whirlpool. On many sites, I have read numerous complaints about Whirlpool products, the majority about the magnetrons in their microwave ovens breaking during and shortly after guarantees run out. They should not be allowed to get away with this. BBB, Consumer Affairs, where are you? To the many of you who have been burned by Whirlpool, I hope you have contacted the BBB and Consumer Affairs and maybe even the Attorney Generals office in your home state.

Great fit and easy for kids to use. Has preset buttons for easy use. This oven is sharp looking. Very easy to clean. This oven was a great value for the money. I would recommend this microwave to anyone and family members.

I have used my Maytag washing machine weekly for the last 11 years... Never a problem. Just a well made, basic machine to wash clothes thoroughly. It does not have all the bells and whistles some of the newer models have, but it is a washing machine, not a video game.

Whirlpool Cabrio drain problem - I never had a washing machine that lets so much through to the drain pump. I replaced pump three times already. First of all, if you put anything with buttons in this machine, you can kiss it goodbye. This machine destroys clothes then lets buttons and coins and whatever through to destroy the fins on the discharge pump. When is the BBB going to do something about this consumer ripoff?

Having spent over RS 40000 on a so-called quality product one does not expect to spend nearly 20000 within the first two years of the purchase. 1. As soon as the warranty got over the PCB (costing 3000) broke down. 2. This replacement had a 3 MONTH warranty. Exactly after 9 months again the PCB breaks down along with leakage of gas. The service team asks us to buy a stabilizer to ensure that no such issues occur as they attribute these breakdowns to voltage fluctuations which are not of any precedence in Delhi. Also the product I am using was sold to me as a stabilizer-free working. 3. I made the suggested investments 4 months later the fan and motor of the freezer stop working. Imagine so much repair work on a new equipment. I have been writing to them yet all that they say in response is we are looking into the matter. NO ONE SHOULD BUY WHIRLPOOL REFRIGERATORS.

Im a renter, and I know the landlord purchased the least expensive stove for this apartment, but that shouldnt mean one has to absorb ongoing off-gassing fumes for well over a month now. The stove was installed 2-18-17, and its now 4-6-17, still havent been able to use it. Is this really off-gassing or is this what Americans have to contend with now! Oh and theres the little sticker that says Made in America and in small print it says designed and assembled in America, but no mention as to where the parts came from!!! The only reason Im giving even a One Star rating is because I cant continue through this review without at least marking one star.

4 years ago, we purchased a Model UMV1160CW-3 over the range microwave. After 14 months the door cracked around the handle and eventually fell off. We made the HUGE mistake of buying the same model for ease of installation thinking that this would be a typical issue. We purchase another duplicate model in April of 2016 and less than 16 months later the same issue occurred. Spoke to customer service on 12/28/2018 and they told me that they would pick up the cost of the parts but I would be responsible for labor which actually exceeded the cost of the microwave. Exceedingly poor-quality product and support. Will not purchase another Whirlpool appliance.

I just bought a Whirlpool 50-gallon water heater from Lowes because my old one took a turn for the worse. I brought it home, installed it just as the directions said, and immediately got an FVS fault detected code as soon as I plugged it in and tried to ignite it. This is by far the worst experience I have ever had with an appliance. And wouldnt you know it whirlpool service center is closed on weekends. What an absolute piece of trash. Im draining it and taking it back ASAP. Lowes and Whirlpool just lost my business for good.

So, I have a house full of relatives from out of town staying over and as luck would have it, my Whirlpool water heater (model # BFG1F4033T3NOV) which I had installed 15 months ago, decided to stop working. The pilot light went out and would not stay lit no matter how long I held the red restart button. I called Whirlpool customer service and was informed straight away that their computer system was down and they wouldnt be able to order parts if I needed them (great start right?). I explained to the woman on the phone what my issue was and also told her that after searching online, Ive found that this is a common failure with these hot water heaters that Lowes sells where the thermal couple is defective and needs to be replaced. She began to inform me that before any parts was ordered (which she couldnt do because the computers were down), I would have to clean the vent openings on the bottom of the HW heater. No big deal. Then, Id have to have my gas line pressure verified by my gas company (what?). If both were found to be fine, Id have to confirm that my flue is at least three feet above my roof line before they would send me parts to repair my unit. This is about where I lost my mind.I run the RMA/Customer service department in my company and if anyone has issues with our products, we ship first and ask questions later. How can a company with known defective products give their customers the runaround and basically tell them that they are screwed until they can take off time from work for a gas co. to come to their home and will also have to have flue replaced before theyll warranty their product?! Whirlpool should be ashamed of themselves and Lowes should distance themselves from such a crappy company with substandard products and shoddy warranty practices. Ill never buy another Whirlpool product as long as I live and will warn anyone away from this company.

Purchased Whirlpool Microwave 1.6. The design has 5 BIG flaws. 1. Too large in depth, cabinets on each side cant open. 2. The one light under unit is so far to the back wall, you need a flashlight to cook spaghetti or use stove. 3. Too large in height, cant get a big pan on your stove. 4. Top of unit is open so much, if you spilled something from the cabinet above it would go right inside the works. 5. Instructions are hard to read & figure out, the wall hanging support is just one piece and if you dont have 2 main beams youre out of luck. GO buy a GE, put it up in 1/2 time & good & secure and works great. Has 2 lights on each side under unit. Fingers over the holes at the top. 1 inch shorter, 1 inch thinner. To my surprise the turntable is even larger, go figure.

I purchased a Whirlpool side by side refrigerator in Jan 2014. The first thing I noticed was the installers bought the appliance in without a box. The next thing I noticed was the door would not close unless you gave it a big push. While looking around at the hinges, I found 2 hairline cracks at the base of the refrigerator and 2 dents. I called Service and they sent a technician out. The technician told me they are going to want to epoxy this and you will see it. They asked did it get delivered in the box, I said no. I asked why, she said it should have been delivered in the container so you would know that it is new and not a rejected one from a customer. I called Whirlpool to voice my issue with having this epoxied. Kecia was the CSR...she said that is the normal repair for a crack. I told her I had a Kenmore refrigerator for 23 years and it was still functional when I bought this. I replaced it to get the energy savings. I told her I wanted the refrigerator replaced. I told her that the cracks tells a story about the quality of the appliance. I asked her what happens if these cracks expand after the year warranty expires. She said you can buy the extended warranty. I said but the existing warranty will not cover the cracks...what will the the extended warranty do? I asked if there were any recalls...she said no. I asked have there been similar complaints about cracks and dings (not that I thought she would answer yes). She said no unless someone had stepped on the base of it. I told her I lived alone and I definitely did not step on the base of the refrigerator. She got aggravated (almost to the point of being rude) and said Mam, no one said you stood on the base. I asked her repeatedly if there was someone else I could speak with. Her repeated answer was I am authorized to speak with you. She wouldnt let me to speak with anyone else. I am done with Whirlpool and stuck with this substandard refrigerator. Not happy at all in Va.

First the ice maker stopped making ice and then the freezer stopped freezing. The unit is 2 1/2 years old. Whirlpool wants $1800 to repair! No Way. Purchased a Samsung and hope I do better with this one. So little to be praised about this American brand.

The Whirlpool hot water heater model ES80H123-45D from Lowe’s is a free replacement for a lifetime warranty unit that went bad after 8 years. First heater would heat to 154 degrees with a setting of 150. Very good. New one heats to 140 degrees with a setting 150 degrees. Digital ESM screen on heater reads 150, but the water is only 140 by my temperature test. I talked to complaint line 5 times in 7 days and was told to do various test, but the temp never went past 140. They replaced both thermostats and temperature still never past 140 with ESM reading 150. They first told me standard temperature was plus or minus 5 degree range. Then, they changed their minds and said it was 10 degrees. They are calibrating their equipment to operate 10 degrees less then their Energy Smart module reads to cover up a performance issue with their water heater. They say this unit will operate between 80 and 150 degrees—nothing’s said about a plus or minus operating range. I will buy a new temperature gauge to see if my old one is correct. It was tested against a digital one a couple of years ago when I had a new dishwasher installed by Lowes. The installers gauge read over 152 and mine read 154 degrees at the sink next to the new dishwasher, so it was close to accurate at that time. Whirlpool is happy with their under-performance.

Uses little soap. Not sure on clean. Don’t think front loader clean as well as top loaders. Would recommend top loaders with no agitation. Also would recommend white as a standard color. I am unhappy with the way a front loader works. I am happier with a top loader, cleans better.

My dishwasher is just under 3 years old. It has never cleaned well and doesnt dry well at all. I have replaced parts for the top rail 4x. I have 4 other Wp appliances and none are good. The plastic parts in these appliances are beyond cheap and yet they have no problem selling them at a premium. And they also do not stand by their products. Why in the world would you need an extended warranty to get you through 3 years? In other words they make crap and want you to pay them because their stuff is crap... Im done with Whirlpool.

Purchased Whirlpool free standing smooth top range at Sears Outlet (scratch & dent) in Columbus, OH on December 8, 2012 for a rental property. On May 18, 2014, tenant said she turned the oven on to preheat and turned on one of the front burners. She said she was at the sink preparing food and heard a loud noise; turned around and there were flames coming from the top of the stove. This didnt sound logical so I called fire department and spoke with one of the firemen. He said there was no evidence of anything in the oven or on top of the stove. Tenant said only thing she noticed is that there was a clicking noise coming from the stove a few days prior. After reading all of these complaints, I dont think I will buy another smooth top Whirlpool electric range. Luckily no one was hurt.

I bought a front loading Whirlpool washer a few years ago after having my old top loading Kenmore for 25 years. It seemed okay, but I did always have to leave the front door open and it always smelled musty, which was of some concern. My clothes never smell totally fresh. The biggest current problem is that several months ago it started with a failure code, alternately would stop without draining, wouldnt fill, or wouldnt drain, and ultimately ended up flooding my basement. So we called for service and they replaced a sensor and said these machines seem to have a lot of service issues with sensors blowing and motors dying. So I paid them that time. Now its a month or two later, failure code again, calling for service one more time. But if it costs too much I will join the legions of dissatisfied Whirlpool customers and will switch to an upright competitors brand.

My $800 Whirlpool Duet Sport Electric Dryer quit working less than 4 years from purchase and needs a new electronic control board. My service tech called Whirlpool to confirm that this is the problem because replacing the thermal fuse did not solve the fact that my dryer wasnt working: Code F01. Diagnosing and repairing the dryer will cost me $375! I am deeply disappointed. I will definitely explore other brands before ever trusting a Whirlpool appliance because I know the company could have done more such as offering to cover or discount the $210 control board, because everyone I have talked with (friends, family, my appliance service company manager, Whirlpool customer service rep) agreed that this is a rare problem and that your dryers are engineered to work 10-12 years. However, as a company, Whirlpool gets an ** for customer service.

I purchased this stove online and have been very happy with the features. I am able to use alternate settings based on the size of the Pan/pot. Cook timer, light, variable rack displays, etc. The only negative feedback is the need to add 5-10 minutes more to the temperature, based on the recommended cooking time of your recipe.

Whirlpool washing machine has always been reliable for me. I have owned 2 and they lasted me many many years. Its easy to use, and cleans clothes perfectly. My family is also a fan of Whirlpool appliances.

If it were not for the fact that this refrigerator has a defect that Whirlpool has recognized and is replacing the unit for, I would give the unit 5 stars in all areas. I would buy another Whirlpool due largely to the companys willingness to recognize a problem and promptly take corrective action.

We bought a 20.5 cubic ft Whirlpool refrigerator. 2 months later it started cutting off, and on in a constant repeated cycle then run normal for a while. We had 2 Whirlpool repair appointments. The first guy said he couldnt come fix it unless it was acting up while he was here which was a intermittent issue. Refrigerators dont perform on cue. The 2nd guy came out after the first guy messed around long enough for the warranty to expire. We went ahead, and replaced the startup relay (most common problem). He replaced the control board, and wire harness. He said if that didnt fix it he didnt know what else to do. 2 hours after he left the fridge was right back to doing the same thing. He failed to report back to Whirlpool that the fridge couldnt be repaired. We contacted customer service, and their resolution was to get another repairman to come out, and replace the control board which had already been replaced. In the end they bailed on us, and left us stuck with a broke refrigerator, and we had to buy a new one ourselves. I might add it was not a Whirlpool. They spent $471 trying to fix a broken fridge, and wanted to send another repairman (another $100) to fix a $629 refrigerator how does that make any sense. It was a very disappointing experience, and Whirlpool should be ashamed.

Our Whirlpool water heater needs a burner assembly replaced. Second time within the warranty period of six years. Parts have to be ordered, so you will be without hot water for several days to a week. The worst part is reaching them. Between my wife and I, we have almost 4 hours invested in sitting on hold waiting for someone in three different calls. They never answer the phone. They give an option to call back. They never call back. Im so frustrated. No Whirlpool products ever again. Im sitting at my desk, hoping someone will eventually answer the Whirlpool line. I dont even have the part ordered yet after two days of no hot water. Who knows how many more hours I will need to sit here and listen to this music on hold. It is incredible in 2021 a company can remain open while offering this kind of customer experience.

Model GB2FHDXWS04 - This refrigerator dumps water all over the floor at least 1 time a week. We just leave a towel on the floor to absorb it because you never know when it is going to happen. Have removed the stuff and cleaned all of the ice out of the bottom of the fridge but in no time it is back. What a crummy unit. I am going to drill a hole in the bottom of it and put in a drain I guess.

Whirlpool slide in range, microwave, dishwasher, KitchenAid fridge: All appliances, stainless finish, were bought with my home in October 2006. Range - Within the first year, I had problems with the outer plastic pieces breaking, the motherboard and the oven and broiler not working. The screws holding the knobs on fell out several times. The oven door was fixed several times this past year until finally it fell off and broke for good and now the oven does not work at all. Microwave - The rotisserie motor stopped working this past year. Dishwasher - Just after the first year, the outer shell of the door came apart. KitchenAid fridge - Within the first year, the temperature adjuster broke. The second year, the ice maker stopped working. This year, the ice maker broke again and the motor quit working twice already and all has been repaired. The freezer handle has fallen off as well.

WRF993FIFM00 - HORRIBLE. I could not believe the reviews for this fridge... so I went ahead and bought it - WHAT A MISTAKE - service guy is at my house right now - fourth time in three months... fridge froze up and all my food has gone bad.

I have had my refrigerator for a few years now. When I first purchased it, it was because of the brand and the looks. As far as performance it runs just as good as any other less expensive ones.

We have had a Whirlpool dishwasher for about 2.5 years and have been happy with how it cleans dishes. About a year ago we replaced our counter top and in the process had to adjust the bend in the mountain brackets that attach the dishwasher to the underside of the counter. This requires flexing the thin piece of aluminum at the perforated line. In the process, one of the brackets snapped. The other was barely still intact and broke several months later. I tried jerry-rigging them, but eventually decided to replace them and called Whirlpool customer service to ask for replacement parts.Unfortunately, Whirlpool wanted to charge me $10.50 apiece and another $9.00 for shipping and handling. These parts could not cost more than a few cents apiece. I was shocked that they would charge me $30.00 to replace these flawed parts. Never have I had such and experience with any customer service department. The three people I spoke with were all rude and unapologetic about my situation. Two blamed it on the install...Ive installed plenty of dishwashers and never had any problems in the past. Even if it was a failure on my behalf, the simple replacement of the parts for a reasonable charge would have been fine by me. I told them Id be happy to pay a few dollars and to pay the full shipping fee (which was also high, in my opinion), but they refused to meet me halfway. I can only think that this is part of their business plan...make dishwashers with sub-par parts, and then over charge for the replacement parts when they fail. Well, I re-upped my jerry-rigging efforts and have improved the engineering of the faulty part. Save my $30. But Whirlpool will never again get my business and Ill be sure to steer clients and friends away from this brand as well.

We purchased a mid-grade Whirlpool Gold Series dishwasher a little over 2 years ago. 14 months in, the motor failed, requiring a $295.00 repair/replacement. That was nine months ago, and now the motor has failed again. That is outrageous! No more expensive repairs on this piece of junk. Its going to the scrap heap. We just ordered a Frigidaire. While I have no experience with that brand, it cant possibly be as bad as Whirlpool.

I bought the Whirlpool bottom mount freezer to find out there were problems with the drainage. I contacted whirlpool and they sent the parts to fix it but they did not send a repairman. I’m 80 years old and I’m not getting on the floor to fix this issue besides pulling it out to get behind it. The ice will buildup in the freezer so I have to empty the freezer and break up the ice. If I don’t break up the ice it will frost over. I will never buy another whirlpool refrigerator and I’ve been looking at replacing this one.

After owning the Cabrio washing machine (WTW5700XW, purchase price $629) for approximately 18 months, it began stalling at the spin cycle, leaving the clothes sopping wet. We found we had to unplug the machine to reboot the computer, and then we were able to manually choose the drain and spin cycle to complete the cycle. Before beginning a new wash cycle, we have to unplug to reboot again, or it sticks in a perpetual pump cycle.I scheduled a repair appointment from the Whirlpool automated service system. The repair man determined the computer control panel has to be replaced. Diagnostic service call was $136, repair est, $321.67, repair service call, $60-130. Total repair cost on an 18-month old machine was $520+. I declined the repair in hope of getting extended warranty coverage from Whirlpool. Nobody has responded to my email complaint from one week ago, not even a computer acknowledgment of receipt of my email.

I have a Whirlpool washing machine that have problem in dryer and drainage. I have registered my problem on 17 December and my SR number is DL 1211015017, but to date, the problem will not shout out. Its poorest response from your side. My machine is in warranty period.

I have used Kenmore products for about 50 years, so when it came time to replace my old washer I looked at Kenmore/Whirlpool. I upgraded to the top of the line. I had been warned by 2 service techs (2 different companies) that had tried to keep my old Kenmore alive that the new ones are not up to par compared to the old ones. The first very small load that I tried, was not even thoroughly wet when I took it out to put in the dryer. 1st service call, tech suggested that I put machine on extra water.That helped sort of. A few weeks later, wash is not getting clean. Called Whirlpool, they suggested getting the washer cleaner and clean the washer. Went out and bought a special cleaner, $10-12 and two cleanings later using the extra water and extra wash water I now was getting cleaner clothes. They said I would need to clean the washer every 2 to 4 weeks. I have continued to use washer but frequently have to rewash about 1 in every 5 to 10 loads as it doesnt always clean everything in the load. Called the Co., they sent service out, they said its OK!In Jan. We went out of town for 2 weeks. The washer had not been used for 4 days before we left. Came home to water all over the floor which are hardwood. Needless to say our hardwood is all warped! Service came out, ran the washer for about 15 min. and said it was fine, nothing wrong! Called Whirlpool again! Washer is now out of warranty. They said call a local service, out of their hands as it is out of warranty! Nothing more than they can do.I have used Kenmore/Whirlpool Appliances all my life and they have been wonderful. The new ones are garbage as far as I can tell. I have a Refer that is now 3-4 years old and I have had problems with that, a new dishwasher that is 2ish and have had service out on that one, now my brand new washer top of the line and it is so bad I am afraid to use it unless I am sitting right in front of it watching it! Further if you have the rinse cycle on the clothes come out so wrinkled that you need to get out your iron out and iron everything including sheets and linens. Lucky that I did not replace my old dryer! Do I recommend Whirlpool anymore? Not on your life. I wish I knew what to replace them with!

Whirlpool refrigerators with bottom freezers have a major defect in a tiny drainage hole hidden inside the back panel. The hole easily gets blocked with bits of debris during manufacturing or with a few bread crumbs, then it freezes shut. Then water ends up all over your floor. You cannot fix it yourself as you have to take apart the whole freezer. The repair bill is huge. This will happen often. Check on the internet and YouTube to verify & you will see that this happens to everyone with a Whirlpool. Also your floor will be ruined if you dont mop it up every few days until the repairman arrives! Stay away from Whirlpool!!

I purchased a Whirlpool Cabrio in 2009. It worked so-so over the years but recently stopped completing cycles, citing false load balance errors and leaving towels and sheets sopping wet at the end of a cycle. Three repair appointments later, and still no success. I am thoroughly disgusted that such an expensive machine only lasts four years. Based on the service techs attitude toward the machine and other consumer comments, Im guessing I will have to replace it. You can guess it will not be with a Whirlpool machine!

I purchased washer (Whirlpool Cabrio wtw5600xwg) on April Fools Day 2011. The first repair was check on 1-27-12. I complained the machine was too loud and clothes seemed too wet - the call was under warranty but tech was unable to verify complaint. So guess what? On Jan. 21, 2013, machine sounds like a stressed jet engine. Now we are diagnosed with a bad gear case for a total repair of $439. Now we are not under warranty and Whirlpool takes no responsibility. Doesnt the consumer have any rights? Do you think Ill buy Whirlpool again?

Whirlpool Washing Machine Model WTW4950XW0 - This washing machine was purchased as a gift by my father. We have owned this machine for about 2 years. I am very disappointed with the quality of this machine. I have 3 children and several pets. I use my machine a lot and need a quality item that will last. This machine is not that item. Within a few months, the machine was off balance and bolts had to be tightened. We have had problems with the belt, bolts coming loose and the machine not draining.More recently, the machine has become very loud... For approximately the last 6 months. My husband has taken the machine apart and looked for anything to be wrong with it and has found nothing. Now the machine is not running. I will turn it on and it fills with water and then stops. I will clear it out and restart it and it does the same thing. Another issue has been with spinning and draining. The clothes are soaking wet even after the drain/spin cycle.I have researched what could possibly be wrong with this machine and have found a vast number of items that could need replaced. With the money I have already put into fixing this machine in the past and the amount it will cost to fix it this time, I believe I will be further ahead if I buy a new machine made by a different company. I will not be buying a Whirlpool product again.

After 2 years it stopped draining. We have to physically hit cancel to get it to drain. Also, I have had to make my own tool to take bottom spin bar off to get to and unjam grinder and we pre-wash all dishes.

My complaint no. ** date 11/07/2014 till date 06/08/2014. Its noted solved by services department after 100 calls by me. They Reply no parts available from company so if you buy washing machine, be careful about Whirlpool washing machine.

My husband and I purchased a Whirlpool Refrigerator, model number GI6SARXXF04, serial number K20311478 on February 3, 2012. It was delivered soon after. In April of 2012 our ice maker quit working. We called The Appliance Doctor for service. They reset the control, and left saying that they thought it was fixed. The ice maker as a result was not fixed. They came out again, and stated that the ice maker needed to be replaced altogether. So they ordered the part and we waited for two weeks for it to arrive and be installed. By this time it was April 23, 2012.Then in June of 2013 we began having water pool in the bottom of the refrigerator and freeze, and water began to leak onto our hardwood floors causing them to buckle. We cleaned it up for a while thinking perhaps something had spilled, and busted up the ice on our own. The beginning of 2014 we called for service from Lanny Adams Appliance. The technician worked on it and stated that something was plugged up in the water line and he thought it was fixed, we paid for this service on our own. On August 14, 2014 we had another technician come out because it was not fixed. The technician came out and stated that it would cost another $219.95. He further stated that he thought that there was a recall of some kind, that I should look into it. I did look into it and printed out the Technical Service Pointer that was produced in November of 2013. When I called Whirlpool at that point, someone was sent to fix it. Of course I had already paid to have it repaired in February of 2014, Whirlpool stated that it was not their responsibility, which again it was not fixed until August of 2014. As a further note, my floors were never fixed because I have hardwood floors throughout my house and simply cannot fix the area in front of the refrigerator. My floor had just been refinished, and after speaking with the floor company that had just refinished my floors a few months earlier, they stated all of the floors would have to be redone or it would not match. Figuring Whirlpool is definitely not going to pay for that, I have just dealt with it, since it cost me over $3000.00 to have the floors refinished.Now, it is February of 2015 and the whole refrigerator is not cooling, and the freezer is not freezing. Again, I woke up to water in the floor on my hardwood floors, and have had to move all of my food to my ten year old Frigidaire refrigerator that is in my basement and has NEVER had a service call. After speaking with service company, they state it will cost $1200.00 to fix the refrigerator....REALLY? So, now I get to go spend a lot more money for a new appliance. You can bet it WILL NOT be a Whirlpool!I contacted Whirlpool again, and I spoke with Robin in your Customer Service Department after speaking with one of your Customer Service Representatives that stated I was basically on my own with the repairs. Robin stated that there was nothing Whirlpool would do, but she would agree to pay for parts and I will be left with the repair labor. Although your company may think that this is good customer service, I have to disagree given the fact that I have had nothing but consistent problems with the refrigerator since I bought it. At this point, I would like to ask you if in your opinion this is a good appliance? I asked Robin and she stated that I needed to buy an extended warranty. Dont you realize it isnt about the warranty? It is about the fact that I have had the appliance for 3 years and have had consistent problems. I believe the refrigerator is a lemon, and I would like it replaced.I have always trusted the Whirlpool name, but at this point, I do not see myself buying another Whirlpool appliance.

Washing Machine Model WTW4616FW - I purchased this machine at Home Depot after I had to return my Samsung Costco machine that was recalled due to the glass top flying off. I was attracted to it by its simplicity in design and price. I have had it almost a full year and love it. I like that it has the deep water wash for over-sized items and a full-sized agitator. I was shocked that it was actually Made in America. I highly recommend it and I hope they keep making this reliable machine that gets the clothes clean. Awesome machine without the bells and whistles that I dont expect to breakdown. Way to go Whirlpool!

I also have the same water running into the refrigerator problem that so many people have reported. Im about to throw the Whirlpool out and start over. It is such poor business that whirlpool wont admit that the appliance has a major problem and fess up to correcting it for owners. I will never buy another Whirlpool appliance and will warn everyone to also steer clear of Whirlpool.

We bought an oven built in from IKEA - Whirlpool. It didnt work from the beginning. We called for a technician, who comes in the next day, took the defective part and ordered a new one. Took two weeks to arrive. Now I just found out that I will have to wait another week for somebody to come and install the replaced part. I am very disappointed with their way to serve me as a client. I explained to them that itd be nice if the technician it will come at the first hour in the morning ex. 9 am so I can go back to work after that. Which is not possible. The tech is more important than you as a customer. The technician will give you a 2 hours windows to arrive and after that who knows how long it will take the repair. So far I have this build-in-oven in the kitchen just for design, is not useful I doubt that it will be working soon. The lady who called me from Whirlpool Canada was giving me theyre the option in the manner or take or leave it.To be honest, I regret buying this oven, so far I havent used. Wasted my time trying to get them to be more efficient, but got the message from them that I dont matter. Never been treated so wrong by somebody who is working in customer service. The first call it was coming from a company which is located in Maple Ridge, BC phone number 604-466-5597 and when I insisted on having the repair being done asap they hung up on me. I asked for supervisor or a manager, and they told me they are not allowed to give any of those on the phone... Buying this oven was a mistake, trying to deal with them another mistake. I dont recommend to anybody this oven or dealing with Whirlpool Canada.

Near the beginning of September I started having trouble with my dishwasher. I called for service to be informed it would be a week before someone would be able to see to my broken dishwasher - which of course is a long wait just for a diagnosis call so decided to call another provider to get my dishwasher fixed in a more timely manner. The repair person informed me that it was the control panel but he suggested we call Whirlpool in order to have it fixed as the part should be covered under warranty. Much to my sadness I had to call again for an appointment with Whirlpool to find out I would wait for a week for a repair person to come out even though I already knew it was the control panel and asked them to order the part right away.Sept. 13 repair man from Whirlpool affiliate comes to my house for about 10 minutes to tell me what I already knew - it was control panel and maybe 1 other part. Cost $99.00 for just 10 minutes - Wow! Then the repair person said he would order the part right away /estimated to be back Monday September 19th great! Two weeks go by we have heard nothing about our part or possible repair of our dishwasher. Call Hurst appliance to see what is happening to be informed the panel is on back order - and they have no clue when it will be available. I should call the manufacturer. Call manufacturer to be told part might possibly be available - Oct 5th - from the United States from somewhere out east in Canada. Who knows? Oct 5th comes and goes as of Monday October 11 have heard nothing about my dishwasher and when it will be repaired - phone manufacturer - by the way which is in Tennessee. What a joke!She says the part is still on backorder but that a replacement part for the back ordered part is miraculously available - she couldnt tell me when that came about, so still have no clue when my dishwasher will be fixed. They have offered to reimburse me the $99.00 service call, but seriously should it take over 6 weeks to have your dishwasher fixed. I still have no clue how long it will take for the part to get here and installed. For 2 cents I would return all my KitchenAid appliances but especially my dishwasher. $99.00 does not appease me. I would like them to cover the labour to fix my dishwasher or a new dishwasher. What garbage and asked to talk to someone higher than the supervisor Gabby of the customer service dept. and was told she is the highest person in Whirlpool I could talk to - thats a joke. Shame on Whirlpool!

Two and 1/2 years prior we bought a new whirlpool range - W10201511 WHT. After one year we had to replace a computer module at the cost of $500.00. One year later we encountered the same problem. Today we went and bought a new Kenmore stove rather than keep putting good money after a bad Whirlpool product. Very disappointing.

We purchased a Whirlpool washer/dryer set 19 months ago and the washer just stopped working. Our trusted fix-it man came out and diagnosed it as a spin bearing problem assuring me it was not anything we had done. He stated it was a defected part or Whirlpool had never put grease in the bearings. A 450.00 part not counting diagnosis and labor. When I called Whirlpool, the first response I got was that they were sorry but we didnt buy the extended warranty, and of course the warranty it had was only a year. I asked to talked to a supervisor and finally she agreed to supply the part, but I was still responsible for the diagnostic and labor fee, which will be a couple of hundreds of dollars! Not happy with Whirlpool and will NEVER buy any product with their name again. Beware consumers!!!

Im guessing the company that makes Whirlpool appliances no longer make dependable appliances… bought home 2 yrs. ago. Bought Whirlpool over stove microwave and expensive side by side fridge. After 1 yr. microwave stopped heating. Now my fridge is no longer cooling. Have cleaned it underneath, did all a normal person would do. I replaced my microwave last year with a Maytag. I’m sure I will have to replace the fridge very soon. My stove is a Maytag. Dishwasher a Frigidaire... have had no problem. Just the Whirlpools… Will never buy another Whirlpool. Not just me, my niece bought a microwave. Her stopped heating after one year.

Your Whirlpool French Door model # WRF993F1FM is a piece of junk... Had the fridge less than a year and had to have repairman come and fix it twice already... Would never buy Whirlpool Product again. Builds up ice in the refrigerator and then loses of most of the food in it. Leaks the water right onto the kitchen floor...really pitiful to spend more than 2000 dollars for a fridge that is a piece of junk.

Whirlpool’s customer service is one of the worst I have encountered. They consider a 6-7 year old $1500.00 range to be old! I said to her, “Wow, if the population was to throw their Whirlpool appliances into the landfills after 7 years, this would be quite a horrendous situation.” I think its disgusting for a company to build appliances with a shelf life of 6-7 years and with only a 1-year warranty! What a horrible brand! I will never buy another Whirlpool brand product ever again. You spend $1500.00 on a range oven and then around 5 to 7 years the control board blows out and costs another $500.00 to replace plus a service agents fee to remove and install.I asked the Whirlpool agent if I could get the control board discounted and she refused and said, “I am sorry, we are unable to help you.” Pathetic! Their cost on these boards is around $120.00 or so. I was told by an appliance service rep they could discount that $500.00 board even half and still make a decent profit. Do not ever buy Whirlpool. Go with other brands instead. Their customer service policies are horrible. Your hard-earned money will be buying an appliance with a 6 to 7-year shelf life before major repairs.

I bought this appliance 9 months ago and it has broke 4 times now for the exact same reason. I have set aside 6 separate 4 hour windows for Diamond Factory service to come repair it. All four times, it has been repaired improperly or diagnosed as “nothing wrong with it”. My refrigerator constantly runs, eventually forms an ice wall of back of freezer, and then eventually ice gets so thick to where it stops regulating temperature. All four times, I have had to throw away all my food, defrost the fridge on my brand new hardword floors, and take off work so I can be home for these 4 hour window “service repairs”. They refuse to replace the appliance. UNBELIEVABLE. Never purchasing from Whirlpool or Home Depot in Sunset Hills again.

Nice looking, prices very fair for quality product. Options are always good. My mom used Whirlpool. That thing that goes in the middle of the old time washer is now gone. That thing would rip or stretch out clothing bras. Anything that was nice it would make it look horrible. Ive had my washer and dryer for 6 years and they still work like new. When shopping for a washer and dryer I do look for capacity, energy efficient and the brand. I prefer to stick to the old school brands just like my mother did. I must admit that I do love the fact that it is an HD high efficiency washer. The deal-breaker would be a low quality construction made a washer or dryer nobody needs to have problems with it. If youre spending that type of money you need to get good quality items.I love my washer and dryer. Theyre both and white color. Its a Whirlpool Cabrio with HD High efficient load energy saver and H2 wash system. The washer has a lid with a see-through glass which I love. My dryer is also a Whirlpool Cabrio steam with a resource saver that gives me a lot of different options as far as my clothing is concerned on how I need it dry.