We bought the over-the-range Whirlpool microwave, model #WMH53520AH-1, about four years ago from Pacific Appliance Sales Kitchen and Home inside a Best Buy store in San Diego. The Magnetron and Diode have malfunctioned and been replaced. Now the plastic around the door is falling apart, cracking, and splitting. This is unacceptable, poor craftsmanship, and low quality for the price of this Whirlpool appliance. This needs to be reported to the company and properly addressed. Until then, were staying away from any Whirlpool related products. We also own Cabrio W/D. The washing machine has had problems from year one. Im submitting a separate review for this appliance. Consumer beware!

We purchased a brand new home with a brand new Whirlpool microwave in it. It was a combo, over the range/hood vent, model WMH1162XVB-0. Every now and again, sparks fly when preparing vegetables. Three times a repairman came to our home with no results. Each time, the problem persisted, with no improvement. On the first visit, the diagnosis was that we did not know how to properly use a microwave. It was noted that they gave us operating instructions and a personal tutorial to solve the problem.On the 2nd visit, we were instructed to buy a protective cover for our bowls when using the microwave. I asked if this would solve the problem, and was told no, but at least we wouldnt see it. This time, the random sparks happened in front of the repair man. He responded that it was the high iron content in the corn and peas that would ignite the sparks. Also, he said we needed to thaw everything before putting it in the microwave. Again, our issue was listed as consumer-use error and nothing was done.On the 3rd visit, we explained that we could not use the microwave on any setting higher than 70 for risking of sparks flying. We showed him the cover we were using, and the permanent marks being left by sparks. Again, the serviceman witnessed the sparks flying, even on thawed peas and corn that simply needed to be heated. He responded that by adjusting the power, and using the cover, we were obviously learning how to work the microwave and informed us that the next service call for this issue would be at our expense. There was nothing they would do for us, as the problem was our fault, not theirs. We explained that other neighbors with the same microwaves are not having this trouble, and we felt it was simply a faulty unit. He didnt seem to agree, nor care what we felt.I have been using microwaves daily for over 20 years. Our neighbors, having the same exact model, have had no issues at all. I know this is simply a faulty unit, and feel endangered each time I use the microwave. Whats even worse is the way Whirlpool has handled our situation. Our microwave is now 4 years old, and I have learned to rely on my toaster oven. When people visit, we have to caution them on the microwave. I will never buy any Whirlpool appliance for my home again. I do not trust the quality of their products or their service.

Bought refrigerator in Jan of 2019. Quit making ice in Oct of 2019. 3 service calls and felt like it was band aided until manufacturers warranty ran out. Now waiting on new freezer door to be made. 6 to 8 weeks out. We will see. Called Whirlpool and was offered nothing. No customer service whatsoever. Will never buy another whirlpool product again.

Whirlpool ADP100 wh. A few programs, washes well, dries ok, not great but ok. Standard free standing size, 60 x 85 x 59 cm. The washer itself is fine, but oh the cheap moulded plastic parts, utensil basket, water arms etc, so poorly made. Its amazing that a company would use such poor quality and design to save what can be a few cents on the overall product, personally I was disgusted at the cheap crappy plastic bits.

This is a freezer on top unit. Purchased in 2015, unit quit cooling, started making a roaring noise. Called local technician, he added 2 oz of Freon, said he has seen many of these same unit losing Freon. Technician said line that goes to compressor is copper and hooks up to aluminum line before attaching to compressor. This is leak point for freon; no way to know when the leak started, but freon almost gone and cost to pressure check for source of leak is costly and probably would not repair problem. Got 6 yrs out of it and I am replacing with another brand. Will never buy Whirlpool again. Should have got 10-12 yrs of use. Do not buy this unit. Wrote Whirlpool first, but no help. Indicated this could be a problem with these units but no recall so I am on my own. Out $900 for a new refrigerator. Big hassle. Unit no good.

I had the biggest nightmare with your sorry company. On 01/05/2013, I purchased a new 50gal electric water heater from Lowes in Waco, TX. I got the unit installed and the damn thing would not heat. I followed your lame support instructions. I contacted your support tech and diagnosed everything possible. I was told I needed to have an electrician to verify that I was getting enough power. That cost me $75.00 bucks and everything checked out. He was not able to check the water heater since he was not a Whirlpool licensed tech. So I called Lowes to return the water heater. Now this is where your policy at Whirlpool suck! Lowes is not allowed to take back/exchange your crap without an RMA number. I had to get it from Whirlpool directly! I called Whirlpools customer service. They flat out refused to do so. They stated that I need to get a certified Whirlpool tech, but it was up to me to contact one! Their nearest one was from Dallas (2 hours away) and could not come out until later next week! I told the tech that its unacceptable! She even refused to get a supervisor! Plus now I blew up on this one. I had to pay the tech $75.00 up front plus the $75.00 an hour to which it would take 2 1/2 hours for repair. Meaning, I would pay more in a damn service call than the actual cost of the new water heater! Oh, but they would refund me in 60-120 days. I would first verify the work was done and if any overcharges, it would not be refunded! So I say to Whirlpool/GE, your warranty policy is a bunch of **. This includes your customer service team as well! I will never ever purchase a Whirlpool or GE product again. Samsung now has my business. May your company fold! Youre a worthless corporation that continues to rip the Americans off!

Does the CEO know you do not stand behind your products? My washer is not even a year old and cost about $400.00. And you have stuck about $1800.00 into repairs instead of replacing a lemon washer! The washer had problems the 2nd month I owned it and you stuck a new clutch in out. Now just about everything replaced, it still does not work so I will order more parts. This is ridiculous. I would love to hear back from your CEO and would like to be reimbursed for 5 days of pay to take off and wait for repair men, laundry mat fees, etc!

We bought a Whirlpool washer (Model # WTW4900BWO) and dryer (#WED4850BW) and within 2 months I was having problems with the washer AND dryer. Every time I washed a load of clothes, the clothes would have some yucky stuff hanging all over it. I called Whirlpool and was told to try setting the washer on 1 Rinse with Softener even though I never use a liquid softener. Their suggestion did solve the problem, but why doesnt a brand-new washer work the way its supposed to? A short time later, my dryer buzzer stopped working and the knob would not advance when set on the Energy Preferred setting. I called Whirlpool again and was told they did not have a service technician in the area where I lived and that it was not likely that one technician would come on the same day to service both machines. I asked why they would sell their products in an area where they were not willing to service them and they said that is the choice of the store that sold it to me. Then they told me there was a service technician available about 40 miles away and they would fax the order to them so they could contact me. The technician who came did look at both machines and was able to determine that the control panel needed replacing on the dryer, but was not able to do anything about the Rinse Option problem on the washer. He suggested that I continue to follow the recommendation of Whirlpool as long as it works. I can do that, but Im not happy that a new machine does not work the way its supposed to. He also recommended NOT using liquid laundry detergent or fabric softener in my washer because it contains animal fat and can build up and cause problems. Nowhere in the manual did it say that. He took the washer apart and showed me how it was already building up under the washer basket. I told the technician that my laundry has had an unpleasant odor to it when it comes out of the washer and even after it is dry. He said that might be because of the small amount of water that is used in the energy saving washer. If these problems cannot be resolved, I consider this washer to be a lemon and hope it will be replaced with a new one. If I had to do it all over again, I would buy a traditional washer. I liked the idea of conserving water, but not if my familys clothes stinks.

Purchased a Whirlpool French Door Refrig. Model #WRF 954CIHZ200 in 11/21/2017 from Best Buy for $2300.00 on sale. Within the 1st year the Ice Maker broke & repairman said the ill design caused the wire to break. He had replaced numerous ones for the same reason. In the 2nd yr the freezer started frosting. Next thing the freezer quit. Next day refrig quit working. Called Whirlpool, said, So sorry. We will send you a $50.00 Visa gift card. That was to cover $200.00 of just bought groceries. Called repair guy & he diagnoses compressor was bad. (IN A LESS THAN 2 YR OLD REFRIG. THAT COST $2300.00????)Now, we are 28 day w/o refrig. Living with a Igloo cooler. Whirlpool says they have no stock left on compressors for our refrig. (probably because there are so many going bad in their refrigerators). They are trying to locate one somewhere in US so that takes 6 days then they have to ship to repair center then they have to schedule us for repair which will probably be another 7 days. Ghee, what a mess! Dont do it folks! Buy a LG or Samsung! If I had it to do again, thats what I would do! Whirlpool is Not what they use to be when I trusted them. Years ago. P.S. I bought microwave, stove, & dishwasher! They are all unsatisfactory! Never again!???

Cabrio poor design - My number one issue with Cabrio is that it is destroying blue jeans. About 7-8 pairs now. It simply rips a hole in the leg. Also, sometimes clothes arent wet, usually not clean.

I cant even tell you how disappointed I am. This washer has destroyed my clothes and towels. Ive tried to reach out to company but they want me to call for service. What would I call for? Washer works, it just makes holes in clothes, in towels. There are so many complaints about this. If anyone know how to begin a process like this, please let me know. Trust me, when I write a review about something, its got to be either really good or really bad. I dont have time to write things like this.

I purchased the original Whirlpool refrigerator in August of 2013. That was replaced in October of 2013 due to a factory defect that left the ice maker unusable. In April of 2014, we now have a factory defect that has resulted in the entire unit unable to keep the fridge below 70 degrees F. It has been 2 weeks since the fridge died and Whirlpool has informed me it will be another 2 weeks until a replacement fridge will be delivered. I have spoken with countless customer service reps and 2 customer service managers, as well as 1 executive from the executive office in Michigan. Several times Whirlpool has dropped the ball in this process. The original repair appointments were booked and had to be rebooked because the repair company could not accommodate the appointment times Whirlpool booked. It took over a week to get the fridge declared dead. Then another week just to process the request through tech support... After speaking with 2 customer service managers and being told it was being rushed, I spoke with an executive who said the claim had never been submitted and it would take another 24 to 48 hours to process. I spoke with the executive after the 48 hours and he said the fridge will be delivered in 2 weeks! 4 weeks without refrigeration for a second factory defect. I have explained that I have a newborn (6 weeks old when this started) and a 2 year old, and we have had up to 9 people staying in the house (to visit with the baby) over this period and that I need a fridge to keep my breast milk cold. I was told I would receive a $75 gift card and a $125 check to help with food and costs associated with the loss of our fridge... Neither have arrived. We are spending quite a bit on ice just to be able to keep food and milk cold to temp. so we dont have to spend money on eating out (too expensive for us). I am shocked by Whirlpool’s poor customer service. The first time the fridge was replaced I dealt with one person and didnt have to call the customer service line every day. I wish I had her number still.

I purchased this washer about 3 years ago to replace a dishwasher which lasted 20 years. Within a year the racks began to rot, the front panel plastic started to peel off. Within two years half of the racks rods completely rotted away. 3 years later the washer is busted - most likely pump which was probably blocked by one of the pieces of the rack rods. I am replacing it with Bosch - German engineering. Needless to say I will NEVER buy a Whirlpool - formerly reputable company again. Good-riddance Whirlpool.

I purchased a Whirlpool WTW6600SW in January 2010. I dont normally purchase an extended warranty, but it was a fairly expensive washer. So I did. In July 2011, water starts gushing all over the floor. After my first visit to see what is wrong, I ordered a part. I was out of a washer for 2 weeks. Then in August 2012 the same thing happened. This time the repairman didnt get the part on properly, so they had to come back a third time. I am out of a washer for about 3 weeks. Now, October 2012, it is doing the same thing again! Customer service tells me it has to be repaired for the same problem four times in the same 12 months in order to receive any replacement value. It will have to break two more times! This washer is a piece of junk!

I have called and emailed Whirlpool numerous times, complaining about the fungal odor emitted by my Whirlpool Duet front-loading washing machine (model #WFW9400SU01, serial#CSW0416732). I did everything they suggested that I do to no avail. A customer service representative said that the only thing left to do was to schedule a repair with a Whirlpool service person which I did. He called me when he was on his way and asked me what the problem was, and he told me I would be charged for nothing because hed seen this problem many times before and theres nothing he can do. Please advice.

I bought a Whirlpool wdf760sadmo. It was Oct 2014. It broke 31 days later. Lowes said they would not take it back. Called Whirlpool, they sent a repairman out a week later. They ordered parts and came back two weeks later. The parts were not the correct ones. Ordered more parts. This time back in a week. Ok about three weeks have gone by with a broken dishwasher sitting at my house. Got it fixed. A month later a different problem. Call Whirlpool, wait, on hold for about 20 or 30 minutes. They sent a repairman out who ordered more parts which will be in in two weeks. Meanwhile I am without a dishwasher again. I have had to take a day off work each time they have came to repair it. I have spent way too much time on this thing. I wont be buying another Whirlpool.

I have been having a problem when washing my jeans in the Whirlpool Cabrio that I have never had before with my old washer. When I wash my jeans, there are always a few pair, never the same ones, that have an odor like dirty dishrags on them. I always hang my jeans to dry so I do not think it is this. I have tried to add a freshener to the wash cycle, it does not work. I have tried to dry them in the dryer with a scented dryer sheet, it does not work. I am assuming after reading these past complaints from other consumers that it is not getting all of the clothes clean because of the lack of water. I always use the deep water cycle, but maybe it is not enough water as previously suggested. I have had an issue with blankets and other heavy items not getting clean and/or not even wet. Thoroughly disgusted with this appliance!! I love all of my Whirlpool kitchen appliances though!

We bought a new brand Whirlpool, ice berg, 2 door refrigerator in 2006. It worked fine for 6 months and then started giving all the problems. Until now, we have repaired it at least 10-15 times with company servicemen and also private repair shops. We are just so tired and frustrated will all that we have gone through because of this fridge. Today, the main door just came out and it is probably the 16th incident. We are hardworking people and take a lot pleasure and find lot of happiness in buying something new. It took us almost 2 years to save money for this new fridge with cost us about Rs. 20,000. But I should mention this that we have already more than Rs. 10,000 in repairs.I am sure this would just be another email in one of your inboxes but wanted to write this and convey the message that we are hurt. We do not want to take any legal actions as middle class men in India do not have the resources to do that. But I would surely not buy anything of your brand going forward and would not suggest anyone for it. Writing this in assumption that you understand the pain middle class men goes through to but something worth Rs. 20k and spends another Rs. 10k for repairs. We had high expectations from your product but that was not to be.Following were the problems we face in last 4 years: 1. Refrigerator not cooling (5-7 times); 2. Top door broken (1 time); 3. Main door broken (1 time); 4. Water leak problems (5-7 times). I hope someone will read this and forward it to concerned department.

I have read most of the reviews and it seems like I have ALL those problems with my Whirlpool Cabrio, but I also need to add that there is rust around the bleach dispenser and I DONT use bleach. The inside is also rusted, but its not visible until you take a good look inside because its under the white paint but its all around the inside. So I had to stop using the machine because I now realize what was the cause of the damage done to some of our clothes. We all need to get our money back and have this washing machine picked up and thrown away!!!

I purchased this Cabrio washing machine in December of 2016. I have had a huge amount of trouble with the soap not washing out along with it tangling my clothes. This has to be the worst machine I have ever purchased.

I bought Whirlpool hot water heater with the Honeywell part in 2014 and the thermal box went out. No flashing lights, no way to reset. I understand that Whirlpool had a class action lawsuit after researching. Still selling this product to consumers. Whirlpool should be held responsible, and be made to give an allotment to replace homeowners with hot water tank of choice! If lawsuit is active please add my name.

I took the time to read the owners manual, and then ran machine (washer wtw5000dw0). Using an affordable HE approved detergent (Xtra), I had no problems. If the washer doesnt fill or drain correctly, look up how to recalibrate it, was easy to do because I did that after transporting it. My clothes are cleaner, and I am using LESS detergent!

Appliance repairman is coming tomorrow. Washer is less than 2 years old and will stop mid-cycle more than once (I re-start it)... At first when I thought the cycle was done I would get ready to move the clothes to the dryer and realize they were all soapy and sometimes they were just massively soaked so something is not working right. Sensor?? Hopefully not the computer panel as that will be too expensive to repair.

I originally brought this to the attention of Whirlpool on February 27, 2014, and they chose to ignore the matter I raised. I am appalled at their customer service, but then again, customer service has been dead in America for decades now. I purchased a KitchenaAid (Architect Series II, Model KERS807SSS02, Ser. XW4704146) oven in 2009, which included a 5-year extended warranty. The first time I had to use my extended warranty was the first time a pot overboiled and thus overflowed covering the top of my range. Since then, Ive had to have my oven serviced two other times, but resulting from a pot which overflowed on the range.The controls are located in the front, directly below the stove top. There is most definitively a flaw in the design of the model I purchased. It seems quite obvious to me that the design should have included protection from moisture reaching the controls. It is very common for pots to overboil, from time to time, and thus overflow, but this should not cause the controls to malfunction due to seepage. Had I purchased the model that had controls behind the range and controls above the cooking surface, moisture would never reach the controls when a pot overflows. It should not cost hundreds of dollars each time a pot overflows on a range. Had I known that the oven model I purchased had a design flaw that allows moisture to reach the computer controls of the oven, I would have purchased the oven with the controls above the cooking surface.I invested over $2K on this oven because having owned KitchenAid appliances in the past, the KitchenAid brand had historically proven reliable. KitchenAid (or now Whirlpool) can no longer take pride in the quality of their products, most likely relative to the loss of manufacturing jobs in the U.S. Whirlpool ignored me the first time I contacted them on this matter and most recently today when I was told that it was a use matter. Apparently they believe that an overflowed pot is not a common occurrence on a range. I wrote directly to Jeff Fettig, CEO of Whirlpool and he has chosen to ignore me.

Our Whirlpool 40-gallon electric hot water heater, purchased in 2008, has performed fine, until today when it flooded our basement and, of course, did not provide hot water. As the paperwork says, it has a 12-year warranty. What options do we have for repair or replacement, preferably replacement?I was unable to contact anyone on the 877-817-6750 number due to the bad weather. The model # is EE3J40RD045V, the serial # is 0742130246, and the product # is **.

Bought a standard 18 cubic foot top mount Whirlpool when moving into my first apt. The refrigerator cost a little over $500.00, is spacious and energy efficient. No ice and water in doors and no chip boards for any controls but still working perfectly. It is now 30 years old and never even serviced. When buying appliances get basic, do the job units and nothing with chip boards. They are still sold today and the fridge I have costs less now.

I am experiencing problems with keeping my pilot lit too. I checked the screen and this is not the issue. I have just returned from Lowes where I purchased the water heater and they informed me Whirlpool supplied kits for this issue and it was widespread. They mentioned a class action and went on to tell me they and all surrounding Lowes stores are out of the free kit and arent expecting anymore. Am I to feel lucky my water heater water didnt fail sooner only to feel unlucky all of the free repair kits are now gone? Lowes provided me with the Whirlpool phone number for help and they have just informed me it will cost me $35.44 plus shipping. I now see how widespread this problem is. This isnt right. I am very disappointed in the handling of this known problem! What is my next course of action?

I want to make this clear I’d give NO stars if I could!! Whirlpool is totally junk!! I bought a whole suite of Whirlpool kitchen appliances from Home Depot that is a dishwasher, stove, and fridge. The dishwasher never cleaned the dishes, always left a film on everything, cant clean out the drain area, the screens don’t come off and less a year later the dishwasher top rack literally fell off and broke all the glasses that were loaded in it and the fridge keeps freezing all my food!!! I keep having to adjust the thermostat up down up down just to make it doesn’t freeze. Now that the warranty is no good on any of the crap I will no doubt be charged an arm and a leg to get it fixed, which definitely won’t be worth it!!! Whirlpool is such crap!!! Made in America no wonder!!! Don’t buy any whirlpool anything!!! You will be very VERY disappointed!!! I’ve bought plenty of brand new appliances. Bosch is by far the best dishwasher even the cheaper ones. Now I have to pay to dispose the whirlpool crap!!! I am sure whirlpool doesn’t give a crap though!!! They will keep selling their crap, but don’t Buy it!!! You will be soooo disappointed!!!

I felt compelled to write this review, to sum it up NEVER buy ANY Whirlpool, KitchenAid etc brand. Nothing but the worst experience, it all started with a 5 year old Whirlpool fridge that stopped cooling, I called and they said they could send someone for like 200$ and that it does not guarantee it will be fixed. So I called an independent and he tried to refill the freon, but it was leaking behind the fridge in a section you cannot access because they want you to buy another one, so 5 year old fridge in the garbage and now to top it off, a KitchenAid knife set that is barely used, one of the big knives broke cutting a fruit, and good luck in any circumstance getting any customer service. SO NEVER AGAIN, TRUST ME AND PUT YOUR MONEY ELSEWHERE ON ANY OTHER COMPANY.

We have already filed a complaint but could not get any satisfactory reply. Our washing machine is not working properly & we are very angry with your service. It has created a lot of problem to us. Kindly do something regarding this.

We purchased the Whirlpool Duet Sport matching washer and dryer new in 2006 from a local appliance store. The washer was around $1,000. The salesman sold us on the load capacity, telling us it can wash 15 pairs of jeans. We dont overload it, mostly because its a high-efficiency washer and doesnt use much water (Im still trying to figure out the concept of how can you clean a whole load of laundry with a little bit of water). Its very quiet, but the cycles take longer than standard washers.Also, you must use very little soap (too much soap will cause the washer to stop and display an error code, which youll have to call a technician to come and reset). It is now 2013, and the washer started thumping during a cycle and there was a burning rubber smell. We called an appliance repairman who gave us an estimate for repair of $800 to $900 (for a bad bearing/bearing casing and inner basket). Im sure that there was quite a markup on those parts! It seems to me that the older non-efficient washers lasted longer than 7 years, and certainly didnt cost $1,000 when new.

What a POS. Havent even used the thing to cook a meal yet and already some chunk of metal fell out from the port at the top left inside the oven (behind the vent). It was clearly cheap pot metal. What else is this thing made out of?

The washer is a lower priced but basic machine with few bells and whistles. However this is what we wanted. Less tech with less problems so for us it works. Does the job it is required to do. Cycles do take much longer than our old machine did. Probably due to water conservation.

My husband and I have been loyal Whirlpool consumers for over thirty years. When it came time to purchase a new refrigerator, we purchased the GC3SHAXVY00 model. It was quite expensive but we decided to splurge. This was the worst mistake. Let me also state that we have had the refrigerator now for maybe 5 years. Within the first 6 months, the door that is the central operating system for the appliance went out. The appliance was still under warranty at that time, so Whirlpool ordered a new door. The technician replaced the door and left. However, within 15 minutes of the new door being replaced, the entire refrigerator began to shut down, not just the freezer. Fortunately, we had the techs cell and we called him and he came back and put the old door on until he could order another new door. That made three doors in the first 6 months of us owning the appliance. Then, the ice maker started freezing up. We were told just to defrost the ice maker once a month, that this was a problem the company was experiencing with this 500-dollar refrigerator. Then, the water line started freezing so we would have to leave the freezer door open for about half an hour every week to get the line to thaw so that we could get the water to come out of the dispenser. Now, the ice maker has quit completely. Are we going to call a whirlpool tech? NO, what for?This refrigerator has been a true lemon from day one. I have three more Whirlpool appliances that have broken down within 6 weeks of purchasing them. It was time to replace our appliances so we thought we would support our local economy by purchasing Whirlpool. To say the least, that will never happen again. I will be replacing all my appliances with LG from this day forward.

My wife and I purchased a Whirlpool Duet washer and dryer 5 years 1 month ago. We purchased the front load style because they were supposed to be better made than the older style. Its just my wife and I no kids. We never overload the washer or dryer. Now the drum bearings in the washer have gone out. I feel that a washer should last longer than 5 years and 1 month. I dont think I will be buying another Whirlpool.

My water heater stopped lighting. I found out that I needed to replace the thermocouple. I wasnt able to find the right one anywhere. I called whirlpool and they sent me the parts I needed totally free. I was so happy to get it in the mail the next day cause I have gone 1 week without hot water. I went to work and got a call that my kids are dizzy and throwing up. The house had filled with carbon monoxide. The only thing that saved us was the fact that my AC unit for the downstairs was broken, so it could spread the carbon monoxide to where we slept. The gas company said that we most definitely would have not woken up. I now have a notice for hazardous material on my house. I thought we all just caught the flu. I had no idea that we were being poisoned because of this damn water heater. I could scream. Im a single mother with four kids and a sick mother and cannot afford a plumber for this madness.

I purchased this washer brand new just 2 years ago. It started making loud crackling noises approximately 3 mos ago. Yesterday it decided it did not want to spin or drain. Today a repairmen tells me its a wash. The computer screen has gone wacky and the cost to replace that will be well over $400, almost to the penny what I spent 2 years ago. This is not a good product Whirlpool and i trusted you since my previous washer lasted over 15 years. I need a refund and a new washer! Disgusted!

Whirlpool gas range Model WFG5245LAB2 has serious flaws that are a danger. I noticed the handles to turn on the burners seem sloppy. So sloppy in fact that just brushing up against the knobs will turn the gas on. This happened when I had someone visiting and we returned you could smell gas in the house. We were none the worse since we were out however my 3 cats were in the house the entire time. Tonight I removed the large grates that go over the burners to clean the porcelain. Once again I brushed up against the handle and the back burner ignited causing me to burn my hand. This stove is a danger to all.

Whirlpool hot water heater - The water coming from the faucets when it is hot is red. Therefore, I contacted Whirlpool and was informed that the anode has failed. The anode is not covered because, according to this company, it is not considered a working part. It baffles me that the anode is not a working part since it keeps the tank from rotting. I have only had the hot water tank for three years and this part has failed causing my hot water to be red. Since this company contradicts itself, I either have to live with red hot water (rust) or replace the part on my own. Unlike your company, Lowes has customer service. They apologized and will be paying for half of the expense for the part. Unfortunately, I still must pay for an employee to replace the part. This whole situation is absolutely ridiculous. I will never be purchasing another item from your company and in addition to that, I will tell everyone I know to avoid this company at all costs. You should strongly consider revising this policy before you lose all of your customers.

We bought the Cabrio washer and dryer on June 2008, and it wasnt very long after that, that we had to have a repair done. Then, it started twisting the clothes and the sheets into a big knot. Two king size sheets and 2 pillow cases got so twisted that they are no bigger than a watermelon, and believe me, they are very hard to untangle when they are soaking wet. The machine in the drying cycle sounds like a commercial jet taking off. We can hardly talk above the roar of that thing. I hate it with a passion. Whirlpool used to be all we bought, but that is going to change.Linda

When our home burned down, had to get a manufactured home. Orig. refrigerator size was 32 cu.ft. This one that came w/ the house is a lot smaller. Weve has issues with ice dispenser several times in the 18 months weve been here. But I would recommend this size.

Ive had the WDF510PAY dishwasher for 3 years and the circulation pump broke. To be more specific the impeller inside the circulation pump warped and then basically got lodged because it became oblong and then it wouldnt pump water to the spray arms etc. I bought a new pump because the warranty only last a year. The pump cost around 90 bucks. After not even 1 full year this factory replacement pump failed again. I reviewed other Whirlpool dishwashers more expensive and I found they all have this same junky circulation pump. Im not sure of a better dishwasher but I would never recommend a Whirlpool dishwasher again. They also use the same circulation pump in Maytag and many other brands. Whirlpool or whoever designed and sold this pump to Whirlpool should be tracked down and beaten. Simple products like dishwashers should last more than 3 years. The technology is nothing new. A product should last 10 years at least.

The 12 year warranty, means nothing. The heater only worked for 30 months, and then its upper sensor fault code flashes, and the heater shut down. I called Whirlpool, and they have me use an ohm meter to help troubleshoot the problem. So if you are not handy, you are out of luck. They decided it was my control unit that is defective. They will send me the part free, but I have to pay shipping and installation. What a deal, and what kind of management would dream up of this. The heater is marketed as a 12 year warranty model (only on the tank). Would anyone, having been through this, buy another Whirlpool product?

Purchased a new Whirlpool washer and dryer at HH Gregg about 4 months ago. We complained to HH Gregg that the low water washer wasnt working correctly. It will only get about an inch of water in it causing buttons to be torn off... just beating up wet clothes. HH Gregg told us to try a few things. When we went back to HH Gregg with the same complaints they told us it was too late and call Whirlpool. Serviceman came out and said everything was fine with the machine, we just need to load more clothes! We are only 2 people, one of us wear a uniform and needs washed when we may not have a full load. Called Whirlpool to complain again and they said there wasnt anything they would do except send out another service person for a second opinion, which just means taking more time off of work. HH Gregg talked us in to this type of low level washer. We are still making payments on it!!!!

First my pump went out on a 4 month old washer. Had to wait several days for them to fix it. My washer worked for two weeks and same problem. Its been over a week and the service man cancels then shows up and tells me pumps out and can get one for several weeks. I cant stand them still not fixed.

In the middle of the evening the door glass spontaneous shattered with nobody around. Its only a 3 year old microwave builder installed in a new home. Ive always heard Whirlpool appliances are garbage but this proves it 100 percent.

My Whirlpool Cabrio WTW7800 was bought 1 and 1/2 years ago. The lid is glass with a plastic edge. The plastic part of the lid next to the glass and hinge is cracking causing the glass to stick up. It is cracked from the top of the lid toward the base if the lid were closed. The only way this could happen if it werent a manufacturer defect would be if someone were to get inside of the washer with the lid locked and try to push up to get out right at the hinges. I have noticed several other complaints of the same problem on this website with the same model. Clearly this is a manufacturer defect. I am on the phone with Whirlpool now.

Whirlpool Cabrio Platinum Option - Very stylish. Well built - very solid and heavy constructions. Full features from quick wash to sanitary wash, very energy efficient, steam setting on dryer for touch-ups. Quick loads, etc. We were looking for a washer and dryer set that would accommodate large quilts and blankets and still have the flexibility to handle small and delicate loads, and be energy efficient. The Whirlpool Cabrio Platinum Option is solidly built and very sturdy. It handles small and large loads and is very energy efficient. Both the washer and dryer handle sheets and pillowcases without a problem. Wed recommend them to anyone.

I purchased a Whirlpool Gold from ABC Warehouse in Flint, MI, for $2099.00 before tax and it was delivered on 10/22/2010. Head-liner of inside of refrigerator has a crack about 3-3 1/4 inches long and the refrigerator is running more often. A repair tech came today, 10/14/2011, and did his job fine. He called Whirlpool and they stated to fix it with epoxy? The repair tech is ordering this. I called Whirlpool at 9:00 am right after the tech left at 1-800-253-1301 and spoke to Sherry. I explained everything to her in a very nice manner and she stated that according to the manual, they give us it is for repair only? I said, ok, could I please speak to her Supervisor and she said yes but it will be the same answer. I spoke to her supervisor, Lisa at 9:15 am, she came on talking about the problem and let me talk, I asked her on several occasions are you still there, and she said yes, her words were that Whirlpool only repairs nothing else for the year as per my paperwork (record). I said we dont even get this till after we purchase the item, I mentioned I had a Cabrio Washer and it was junk and had more service calls than any other machine I owned. I have a stove as well from Whirlpool it’s been good so far, I told her with service like this, and them knowing their liners are made of cost cutting saving materials as I have read enough complaints about this on the internet, that Whirlpool is eventually going under and so are the other small shops that do part work for them and their jobs will be outsourced to Japan, China, India and so on, I asked if there was another person higher up than her I could speak to and she said no, they’re not available at this time I snickered and said thats management for you. They have a customer service rep (call center complaints which is Sherry), then supervisor like you (Lisa) then some other management that dont want to talk to you. Way to go Whirlpool. I told her to document that I will never buy another Whirlpool appliance and I will definitely tell others and so on, and if we get enough folks to ban them they will leave USA or close and then Sherry and Lisa will be unemployed just like the rest of us in the good ole USA. Poor appliances for folks that can barely afford to make it and if you’re lucky and working like me and you buy something; shouldnt a refrigerator last more than this, and you stand behind your products? I also told her I know some are abused but this was not an abused product from me. It is a Whirlpool ‘cut your cost savings product’, and forgets the customer. Please look at the old appliances, I also mentioned I have an old Amana in my garage that is 17 years old runs great and never had a problem. And I gave her up for this piece of junk Whirlpool. I then told her I will write letters, emails and everything I can think of to ban this make and product. Model number of this refrigerator is GI7FVCXWBO, freezer on the bottom, fridge on top, side by side doors, solid black with ice maker. When I purchased this I bought it to last a long time as I had to finance it, and take from our monthly income. I had never had a nice fridge, but heck this is not nice. It’s a joke and the sad part is, I owe over $900.00 still and just got laid off. Thanks to the good ole USA and Michigan, but I will pay it off no matter what cause I pay my bills, and stand behind my name as a good person and citizen unlike Whirlpool. Boycott their products as they dont care about us or the American workforce. Oh, and this damage was not caused by abuse to the fridge - it was poor quality of materials in their products. Thank you for letting us complain about products! Also, it’s not like I can go out and buy another refrigerator as it took me over 18 years to get this one. Thanks WHIRPOOL for letting me down on another bad product but it will never happen again. Ive definitely learned and will teach others. Its just not fair that these big manufacturers can get away doing this to the poor people, maybe its like they say; corporate greed?

Absolutely read the reviews on this machine before deciding on a purchase. I have experienced with great frustration every issue addressed in other reviews. Clothes constantly have to be rewashed. The Quick cycle will leave your clothes in a puddle of water. But then there is no spin only cycle to correct that. I have purchased Whirlpool washers before with great satisfaction but this machine is not worth the money I paid for it and does not save me on water or electricity costs because of all the rewashing I have to do. Like others I am stuck with this machine until it dies. You lost me as a customer, Whirlpool.

My whirlpool Cabrio washer top load had the rust problems, bearing problems, support arms replaced along with the complete drive assembly motor bearings and all the parts. My bearings have failed 3 times since 2009. This machine is junk. Customer service at Whirlpool is a joke. They treat you as if you have had to do something wrong. Finally I spoke with a salesman who said speak with the warranty company. I have the extended warranty which I advise everyone who purchases an appliance to get one. So I spoke with them and they sent me a check for a new machine. I must say our warranty company has been very helpful. So THIS IS MY WARNING TO ALL. PLEASE DO NOT BUY FROM WHIRLPOOL. IF YOU DO YOU DESERVE WHAT YOU GET, SORRY TO SAY... Have a great day.

I am getting numerous F1 codes on my Whirlpool Cabrio washing machine, Model #WTW6600SW2. By doing thorough research on this issue I can see the problem is in a known defective control board (part #W10130544). This part has even been replaced by Whirlpool with a new control board costing around $300 for just the part. After calling for repair service, two people (1 agent and 1 supervisor) refused to acknowledge any known issues with this part and further refused to any type of repair or replacement of the part. It is impossible for anyone in that position to not have knowledge of this problem. Simply look on the internet for a countless number of people with this very same complaint. Even though my washer is eight years old it has had very little use. There are only two grown adults in this household and the machine has never been abused or overused. It still looks new. Whirlpool should be honest and responsible when dealing with this type of problem. They should agree to pay for the part and repair service... at the very least they should agree to pay for the part.

I have always chosen Whirlpool or a Whirlpool product such as Kenmore or KitchenAid. Preferably with an actual agitator in the tub. As a very capable handyman, repairs have been easy and relatively reasonable in cost. My units are 15 years old and going strong.

In 2015 door of top loading washer (Whirlpool Cabrio Washer) needed total replacement. Lucky I had an extended warranty. 2018 March, extended warranty expired and now have the exact same problem. Pretty crummy product if major part like a door has to be replaced every 3-4 years. We do not wash large items like blankets/quilts in this machine. That goes to a laundromat where there are oversized machines or to a dry cleaner. So the only reason for this breakage is a default in the lid assembly. There is only one phone number for customer service, repair, parts etc. Put in my service call and filed a complaint at same time hoping for at least a small discount. Ha! $100 plus tax for service call- part price ranges from $150-230 plus tax. Whirlpool could tell me the part exists but would not say how long it takes to get it! Do NOT buy Whirlpool washer with top load lid that has glass window. Big problem is that Whirlpool now has Jenn-Air, KitchenAid, Maytag and Amana all under their umbrella.

Whirlpool Cabrio Washer and Dryer - I have had all of the problems that all of the other 900 people have complained about! The washer does not wash anything properly. I have even experienced having something such as a bit of cereal stuck to a dishcloth and it was still on there after a full wash cycle. All of my whites are now grey and stained. All of the sheets end up with a huge dirty ring the size of the tub in the middle of them. Everything comes out in a tangled mess of knots! Very frustrating! Everything comes out smelly as if its been sitting in the washer for days. Nothing smells fresh and clean like it should. Energy wise, we are using two and three times the amount of energy as I am washing and drying things for two or three times over, which brings me to the dryer. I put one single load in and it takes two or three cycles to dry it properly. This is unacceptable and I cannot believe that we cannot get some satisfaction from someone in this regard! We bought our set from Sears and I feel that they obviously know of this problem and still continue to sell Whirlpool products! Weve all been taken for a ride and Whirlpool should be held accountable for ripping people off this way. Someone please help!

Have had this Whirlpool for 17 years at least. Only issue we’ve had with it was the ice maker that went out after about 14 years. There is plenty of space in the door. A place that holds cans, 2 shelves that go across the door, a small shelf and a butter shelf with a lid over it. Nice looking too.

Whirlpool refrigerator stopped working after two years of ownership. The back of the freezer compartment will ice up, stops cooling and makes a loud grinding noise. We expected a much longer life in a brand new refrigerator. Our extended warranty plan has not provided a replacement or comparable credit for a new refrigerator. We have been without a refrigerator for over a 1 1/2 months. Very unpleasant during the holiday season!!! I would never recommend buying a Whirlpool product of any kind.

The main control panel on my Whirlpool Cabrio Washing Machine broke twice in the second year of ownership. I bought this in 2006. The part was replaced in March 2007 and then again in October 2007. Now, it is broken again and Whirlpool says too bad, they will not replace it again and will cost us $275 to fix it. People have posted about this problem all over the internet. How can they not help their customers and recall this washer part?

My Whirlpool Cabrio Washer is less than one year old and quit working. Sears was supposed to come out and fix it (I even have the extended warranty till 2014). Service never showed up; when we called, they told us we had been rescheduled. Here it is the rescheduled day time slot and they still have not arrived. Im getting the runaround from them and I am supposed to be grateful because they gave me a $75 gift card for my inconvenience. Im on hold with Whirlpool because I just want them to take the washer back. I have been told by Sears since it is over 90 days, they cannot refund my money. I just have to wait for a repair which may or may not happen since they may not have the parts. This is unsatisfactory service from both Sears and Whirlpool. I have always bought my appliances through Sears and they have always been Whirlpool. I wish I would have read all these reviews before I purchased this model.

I have a 4.5year old Cabrio washer. Ive replaced the water pump 3 times due to a weak plastic part which keeps blowing out due to pressure. Now, the unit is leaking rusty, black fluid from the bottom. I purchased it at HH Gregg in Indianapolis, In. Svs tech called. They have never seen this on such a new unit. Parts and labor will equal $400.00. Calling whirlpool customer care did nothing. I offered to pay the labor of $100, If they would be willing to pay for parts. Talked to a supervisor who offered to sell me an extended warranty costing $300.00. I am a stock owner in Whirlpool, no joy, dissatisfied with faulty product. They are unwilling to make this situation right. The unit is poorly made. I think a $800 unit should last longer than 4-5 years. In 2006, Whirlpool stopped offering a 5 year normal warranty on their units. Supervisor would not let me talk to anyone else.

Sounds crazy, but the outside of my stainless steel door is all dented. I live alone and one day noticed that it looks like someone body slammed my fridge. Is there air in the door panels that could be escaping or something like that? Anyone hear of this?

I bought a Whirlpool over the stove microwave. It was to replace a GE that was over nine years old. 40 days after purchase and installation the plastic started chipping and peeling. I contacted Whirlpool customer service and was told that it was a cosmetic problem and my warranty stated that I had thirty days of warranty on cosmetic problems. This was a problem because chipping and cracking didnt happen within 30 days. The chipping and cracking continued to get worse. I again called customer service because the warranty stated that workmanship and bad parts were covered up to one year. I was told that because it was over my stove that this was to be expected. I thought this was a dumb answer because had I known that an over the stove microwave would have problems from cooking I would have installed it in my living room over the television. I called customer service several times. One of the times I called I talked to a representative who actually acted as if she wanted to help me. She suggested sending an e-mail with pictures and gave me an e-mail address. I did this and got no response. I was getting close to the warranty expiration date. I called again and was told that pictures wouldnt work; I would have to pay to have a serviceman come out and write a statement saying that it was not cosmetic. The cracking and chipping is so bad that I cant clean parts of the door because the cloth or sponges catch on the cracks. The door on the GE microwave did not look as bad after nine years of use as the Whirlpool does after 1 year and 8 days of use. I am not the smartest person in the world but I know the difference between poor quality material and workmanship as opposed to cosmetic problems. Im pretty sure that if my wife put her makeup on and pieces of her face started cracking and falling off she wouldnt want to hear that it is not a real problem its only cosmetic. Bottom line is I am very dissatisfied with the poor customer service and warranty problems I have experienced. I will not buy another Whirlpool product and would strongly suggest to others to buy any brand but Whirlpool.

I bought a dishwasher with a 5 year warranty. It broke just after one year of purchase and they are giving me the runaround with replacing after finding that the part the part needed to repair machine is no longer available. The warranty clearly states that they will repair or replace with same or comparable machine and they are refusing to do so. I am at my wits end and I have no one to turn to within Whirlpool as they say it is their decision how they want to handle warranty.

Our Whirlpool Duet Washer pair is 2.5 yrs old. The washer didnt work at first, but a repairman found the problem and fixed it right up. They have not broken. The dryer has been fine and we have had them stacked for most of the time without any issues. My problem sounds minor compared to those others listed here, but this thing is ruining all our white or light colored clothes. They go in white, and come out covered with splotchy, dirty looking spots literally all over them! They werent that kind of dirty when they went in. It’s the oddest thing, like it makes dirt. Reading some of these concerns makes me wonder if it has a mold problem inside somewhere, and that is what is ruining our clothes. Tax return is coming and it is going. End of story.

Just like so many on this site Bought Whirlpool Model #WRF990SLAM02 refrigerator new in 7/2013. Just went on vacation for 2 weeks, I come back and the freezer and ice maker are not working. If what everyone on here are saying is true then it looks like I too will have to purchase a new refrigerator and you can bet it wont be a Whirlpool.

The washer never uses enough water ever. The clothes are not clean and it sucks! The clothes are half dry when agitation is going. The bulky setting doesnt clean the clothes either. Ive tried every detergent on the market to see if it would help. No different results. I paid a lot of money in 2015 for this washer and Ive had bad experiences ever since. No change in my water bill since I have to usually wash clothes and towels twice. I want my money back so I can buy a better washer! Im beyond aggravated! I have looked for my receipt but its been awhile. I did get insurance on it. I bought it at Lowes it should be on my card they scan.

Everything I buy from this company breaks all the time. I purchased these brands hoping they were good but apparently not. Always have to get them serviced. Lately they did an exchange on my fridge. Hope it helps because after thousands of dollars of food in the garbage it better work. And the washer thought, Oh Im paying more. It will be good. At this point will cost me less to buy from another company. Buyers beware. Cause the company cant do nothing good for me so dont buy from them.

We bought the Whirlpool top loader washer and the drum broke down and after several attempted fixes it was replaced by new one as we were being financed through a business. So here comes the new one - same exact washer. Not only did it not clean well (normal soiling) then it goes to ul which means not balanced... not because clothes arent but because the thing that balances - it went only after a yr!! It would also keep filling draining again to no drain leaving clothes SOPPING wet... So very disappointed to say the least. What a piece of junk this washer is!! Its going to the curb tonight and being replaced by GE - NO MORE WHIRLPOOL AGAIN !!

I owned a Whirlpool refrigerator for over 16 years and never had a problem. Purchased a new one about 21/2 years ago only because I moved and the size didn’t fit. Love my Whirlpool refrigerator. No complaints.

Without being too critical, I would not recommend this washer for medium to large loads or for throw blankets. I have to wash throw blankets 2 to 3 times to get the entire blanket wet even on deep water cycle. I would not buy this washer again.

The washer and dryer, Cabrio, machines are not even 4 years old and Ive had to repair four different things! Literally just replaced idler pulley today, went to put a load in wash and F1 code appeared. Control panel, 350.00 for whirlpool or a technician to repair! 285.00 for part. I called Whirlpool and was not offered any apology. Never again will I purchase Whirlpool crap appliances!

It washes everything well except the interior of the washer. And the filter is a pain also even when we rinse the dishes beforehand. The buttons are a pain in the ** to see without all of the lights on at night.

Ive been thru 2 new French door refrigerators with the icemakers in the door. Ive lost all of my food more than 6 times! There is a design flaw and they are no longer making the large models. I finally figured this out after reading multiple reviews from a lot of people with same/similar experiences. The compressor freezes then the loud noise all while the temp slowly lowers and ruining your food before you know whats happening. To add insult to injury... After ordering my THIRD replacement, their contracted installation company wont communicate with me to let me know when it will be delivered. Ive been without a fridge for 3 months! Calling them takes a full morning with hold times over an hour! I will never buy another product from them. I have a taboo LG French door with an ice maker in the door in my other home and it has been perfect for 7 years. Just be very careful and read reviews from people who have owned one for at least a year.

I bought the WTW4815EW0 Whirlpool washer. Worse machine ever! It’s take forever to wash a load, there’s no way it’s efficient when it takes twice as long to wash one load. It doesn’t sense the water level correctly, Its noisy, and after only having it 3 years it crashed on me. I refuse to waste money fixing the piece of junk and when I go to purchase a new one it won’t be a Whirlpool.

We purchased this Whirlpool electric range model WFE361LVT on October 20th, 2011 and on November 26th, 2012, the oven stopped working. When the customer service agent answered my call (after being on hold for 21 minutes), she set up an appointment for a repair person to come out to look at it for $79. I cancelled the appointment and looked up the issue and the part number. After doing research, I saw that were not the only one with a problem with Whirlpool products and customer service. How sad that this is the best made in America company can do.

Whirlpool Cabrio - 6 Big Problems: I dont write bad reviews on anything but in this case, I feel I have to warn potential buyers. Ive owned this washer for more than 4 years. Here are the problems: 1) This washer TEARS HOLES in my towels; 2) It SHREDS some clothes; 3) Loads are UNBALANCED every time I use it, regardless of load type or size; 4) Very LOUD when running. My neighbors can hear it and they are 150 feet behind us. It sounds like someone is pounding on the walls of my house. BOOM! BOOM! BOOM! I havent seen it, but I believe it might actually be jumping off the floor; 5) Its NOT High Capacity as advertised. Sure, the drum is big, but you cant put much more than a tiny load in it. If you try a larger load, the clothes dont get cleaned; and 6) Whirlpool wont do a darn thing about it. They dont care about the buyer or their own reputation.Our family grew and I thought we needed a larger washer. I foolishly replaced a ten-year old, $300 standard top-loading GE washer that never had a problem, with this expensive **. The GE had a drum that was about 1/2 the size and it washed MORE clothes! The GE never damaged any clothes and it wasnt ridiculously loud like this one. I regret ever buying this expensive washer and I will never again buy a Whirlpool product.

Our machine was bought via the employee purchase program. Its just under 2 years old and the bearing has been out for nearly 6 months. I called Whirlpool and our local Whirlpool repairman. They both want hundreds of dollars to repair it. Being pretty handy, my husband and I decided to fix it ourselves. Trying to find compatible parts for this model is a NIGHTMARE. Everything in my house is Whirlpool...range, dishwasher (also junk), microwave, fridge, washer, dryer...and it will all be systematically replaced with ANYTHING BUT WHIRLPOOL OR ITS COUNTERPARTS.

I ordered this Whirlpool 29 cu.ft. white french door refrigerator online from Goedeckers on April 26, 2013. Delivered May 15, 2013. Ever since we got it, there was a frost buildup in left back of ref. Also ice would fall out of dispenser all by itself. Also a buildup of ice under ice bin. Water would also drip from dispenser. We thought maybe since it was new these problems would go away. But they just got worse. I called Whirlpool & they sent out tech on 8/12/13. He told me Whirlpool has a problem with these refrigerators & would order parts. Well after 3 times of cancelling repairman due to parts on backorder, I told repair I would call when parts come in. I keep calling Whirlpool & keep hearing parts are on backorder, saying parts will be in in 7 days. I call back in 7 days and hear the same lies. Its a shame that they cant get parts in knowing that there is a major problem. It sounds like a real quality control problem. I really pride myself on buying American made but Whirlpool is not helping my case for buying American made. It would be nice if they offered to replace it being they cant seem to find parts.

My Whirlpool Cabrio WTW5550xw0 has had many problems. It started with the lid lock error, replaced it, lasted about 2 weeks, and got another one. I did the diagnostic test that pointed me to the actuator, replaced it. It worked for 2 weeks, got another one, and then another one. I was getting a bad reading from the control panel, replaced it, and that worked for a while. I found out that the actuator had a little water drops on it. I figured that it must be the tub seal, so I replaced it. That lasted about a week and a half, and it started dripping again. Now, I figured it is that the transmission has bad bearings, that causes my tub seal to leak, that causes water drips to go onto my actuator, causing a failure in that, which can give me all kinds of bad readings on the diagnostic test. I have replaced at least half the cost of the original purchase price on a year and a half old washer. I also bought my son a Whirlpool Cabrio washer a few months before I bought mine, and he hasnt had a single problem.

I paid about $400 for this dishwasher and the regular price was over $600. Got a good deal. It washed dishes wonderfully. All I had to do was scrape the chunks off. It cleaned the rest. BUT... at a certain point, it started NOT cleaning. It was only about 6-7 months old. It was to the point where everything just came out kind of slimy and food grit was re-deposited on the dishes. I cleaned both filters. I made sure there was enough Rinse-Aid all the time. I ran hot water in the sink before starting to make sure the temp was hot enough. My husband went online and someone had instructions about cleaning the water intake because it could sometimes have sediment buildup. Not a difficult process, but there was no gunk in the intake filter. When I listened to a load it seemed like it drained, (most start with that), paused, rinsed for a couple minutes, paused, drained, paused and refilled for the wash cycle. So the pump worked, the arms went round and sprayed. Nothing was in the way of the arms. After it started the wash cycle, it seemed to just stall. It would spray for about a minute and then stop. Im not sure it sprayed after that. The timer kept counting down. It said dishes were clean, but it was an absolute waste of time. I was ready to go buy a cheap dishwasher and throw this one in the dumpster. I think it is a 720 padm??Just after my husband checked the water intake filter, we started another cycle. When it was rinsing, he opened it up and everything seemed to be working ok. It drained, then filled and started the washing cycle and then stopped. He opened it back up and surprise, the water was full on the front level by the float (that turns the water filling off). But in the back of the dishwasher, there was only about an 8th of an inch of water. Online it said the water should fill to just about the top of the heating element. It WASNT. Problem? It wasnt LEVEL. The instructions when installing said it should be leveled. We did when installing it (when it worked great). But looking back, we put in a new hardwood floor about the time it stopped working ok and we didnt put 2 and 2 together. We did not re-level. When we pushed the dishwasher back into its built in cabinet, it must have gotten OUT of level.The rinse part worked I guess. Then it drained and re-filled. After re-leveling the dishwasher, we opened the door at that point. The water was a level depth front to back and side to side. My husband explained what he thought had been the problem to me. When the wash cycle starts it fills, the float shuts off the water at the appropriate level. THEN... the dishwasher starts to pump and fill the arms and the tube up the back that feeds the upper washing arm. So much water goes into the arms and up that tube, the dishwasher looked almost empty of water again. As the dishwasher was now level, it began adding water to compensate for the arm/tube filling. Before the float would shut off too soon because the front part of the tub was full but the back wasnt. Without enough water, the dishes were NEVER going to/COULDNT get clean.The re-leveling made sure that the float didnt turn off the water filling until there was much more water, the CORRECT amount. The next load cycled all the way through, spraying much more than Id heard before and the dishes were clean. P.S. I also got some dishwasher cleaner and used that on a couple empty cycles. I NOW LOVE this dishwasher again. FYI If my husband wasnt handy Id have junked this thing. We HAD leveled the dishwasher when we installed it. Just didnt realize it COULD get un-level just pulling it in and out of the cabinet to install new floors. Check out all the troubleshooting stuff in the manual. But if it doesnt help, put a level inside across the bottom rack, front to back and side to side and make sure the bubble is in the middle of the two lines.The previous dishwasher I had, just made like a fountain of water that went up the middle of the dishwasher into a sort of funnel filling the upper arm. THIS one has that tube up the back and it curls down under the filter and Im guessing it is more sensitive to being OFF LEVEL, because the tube doesnt go straight down, it curls and lays across the bottom of the tub. Without being level, there was never enough water to suck up that tube to start the the actual wash cycle and it just stalled there till the timer said clean at the end. IE: dishes never did wash. BUT IT DOES NOW! Woohooooo!

Just wondered if anyone else has had a problem with the paint bubbling up and peeling off their washer and/or dryer. My washer and dryer are in my laundry room off the kitchen with a heat and air vent in the room and I dont understand why my paint is doing this. They are about 5 years old and have always been in this room, never in a garage or basement. My dryer was rusting on the outside about 3 years ago and even though I bought the extended warranty, Whirlpool said it was only cosmetic and they wouldnt do anything about it. I bought them at Lowes and they were good enough to give me a new one to replace it. Both of the machines now have the paint bubbling up and peeling off and there is nothing that can be done. Anybody else have this problem and if so what can be done to repair the paint? This is my 3rd set of Whirlpool washer and dryers over the past 44 years and I will purchase another brand next time.

We have several Whirlpool products in our home currently and have been very satisfied with their performances. We have their fridge, stove/oven, microwave and dishwasher, all of various ages. We purchased them from a local big box building supply company and installed them our self. The installation directions are clear and simply for the average D-I-Yer. We would recommend Whirlpool to everyone shopping for these home appliances.

The machine is reliable, does not take forever to do a load, it is relatively quiet. It has sufficient options depending on the size of the load. Additional options are time setting, choice of warm, cold or warm/cold water settings. On light and medium loads it extracts almost all of the water; on heavier loads an extra dry spin does the job. In all the years that we have had it, it has required only one service call. The maintenance man told us that this model is the best in a series and he recommends that we hang on to it for as long as possible. We're very happy with it.

I purchased a side-by-side Whirlpool refrigerator in May 17, 2010 from Lowes in Gilroy. After 17 months of service, the compressor went down this morning. I have called the service center and they cant give any help because it was over the 1-year limited warranty. More than $500 is good for just 17 months usage. Would it be worth it to have Whirlpool appliances? Do think about it before you choose a Whirlpool refrigerator.

My new fridge is extremely hard to open. The technician that was sent out told me that there is too much suction building up inside the fridge and freezer and that is why it has to be yanked to open. This is not only annoying it means the fridge is constantly being pulled forward out of place. Technicians solution was to deactive the castors under the fridge. At the time he was here I did not realize that I could then no longer move the fridge out of its place to clean. I called Whirlpool and complained and was told that they could do nothing more for me because the fridge is in good working order. I hardly would call this good working order. They also informed me that if I wished to clean under the fridge or the coils at the back it would require a service call to move the fridge and I WOULD BE CHARGED EACH TIME. Needless to say I AM VERY, VERY UNHAPPY WITH THE WHOLE SITUATION.

We have had this Cabrio washer/dryer pair for 8 years now. I didnt want to buy a front loader at the time since they were relatively new and was afraid to roll the dice. We saw the ads for this pair, the washer was the largest top loader at the time and didnt have the agitator (which I liked) so we bought them from Best Buy. I purchased the extended service plan (thank God) because we started having issues within the first month. First was the dryer, it was making a funny squeaking noise. We called to have it looked at and the tech said the drum was out of round. He ordered a new one and it showed up almost oblong. Returned it and got a second (same thing). We straightened it out and put it in. Two weeks later the control panel went out. Repaired it. Then the washer started. In the first 3 years of owning these we had called to repair the washer 4 times and the dryer 4 times. We could have got them replaced after the 5th call. Of course we had replaced all the faulty stuff and the pair settled down for 2 years.Now I have had to repair the washers control panel myself, the dryer sounds like it is coming apart and sometimes runs for hours, and now the washer cant wash in any cycle but delicate because the drum bangs around and cant self balance any more. What junk!!! I know people that have purchased low end machines and have had no issues for decades, maybe a random belt or something simple. I wouldnt buy another Whirlpool set if they were the last manufacturer on the planet. They should be ashamed that they didnt recall these things for all the problems they had.

We have also had many problems with 3 year old convection oven. After about 2 months the broiler would just come on in the bake mode. I called Whirlpool about this problem and they were a bit ignorant on the matter. They said they could arrange a service call, but if they did not find the same problem mentioned that I could be charged a service call, even though it is under warranty. I denied at the time and the problem did not happen again for about another 1-1/2 years or so. In the last few months it has happened a number of times and the one time my wife leaves the room, the potpie burns up. She also lost a pan of brownies. Now we make sure that someone is in the kitchen when the oven is in use. Today the broiler comes on while pre-heating and for the 1st time we receive a message TURN OFF POWER TO RESET in which I did thru the breaker. It took forever to cool down, then she is going to try again. I also am going to contact Whirlpool and see what they have to say. Last I checked there was no recall for this model (#GFE461LVS), but there should be after reading all of the complaints or they are bound to have a lawsuit on their hands or maybe even a class action lawsuit.

I purchased a Whirlpool Ref side by side 11-2013. I have had nothing but trouble. First the Ice maker leaked, was fixed. The door to the ref has had serviced 5 times. The tech after many times trying to fix hinge on door twice was told to order new door. This took 6-8 week to get. Came today 5-27-15 too but new door on. It is still not right, has big gap in the middle - still not level as should be. I have called Customer Service again today with no help. All they want you to do is spend more money on a contract. I THOUGHT WHIRLPOOL WAS SUPPOSED TO BE A GOOD PRODUCT......NOTTA....WILL NEVER BUY THIS PRODUCT AGAIN. SO IF YOU EVER BUY WHIRLPOOL PRODUCT BE SURE TO GET EXTENDED WARRANTY. YOU MIGHT NEED IT..........STILL NOT SATISFIED AND NO HELP IN SIGHT.

Its a very good one, it kept my stuff cold, and fresh when my other fridge went on the Fritz, but only one problem, and that is, it has glass shelves and if you have kids, it’s hard to keep clean!

I purchased this fridge in February 2015. In August, the handle on the fridge door broke. I called for a replacement on 8/7, on 9/14/15 I received it. It broke on 10/3/15 and had a replacement on 10/13/15. It broke again on 12/26/15. I called for a replacement. I should get it in 10 days. Obviously, there is a flaw in their design. What bothers me is that no one seems to care. I will hope I never have to buy a Whirlpool product again. And I will certainly discourage anyone I know who is thinking about buying their products. I purchased this product at Lowes and they did not care when I went to them.

I purchased a Whirlpool wash machine and dryer from Home Depot 3 years ago. From the outset we had problems with both units. Wash machine spin cycle does not work properly, and that causes a problem with getting clothes dry. Some soiled clothes will not clean properly and have to be hand washed. Dryer rarely works on one cycle, towels and bed sheets have to be run through a second cycle. These are NOT energy savers. Garbage product, I will never buy Whirlpool again.

Whirlpool Cabrio does not clean clothes and leaves white residue. I have had it for 1 year. Spent so much money on this set of washer and dryer and it is a piece of junk. Whirlpool customer service does not care or respond. Worst purchase ever.

My husband purchases Whirlpool washer years ago. Started acting up after 18 months. Wont spin, stays locked, clothes are soaking wet. Used troubleshooting website. Spent over $200.00 in repairs... including new board. Still doesnt work properly. Whirlpool customer service recommended buying a extended contract for over $300.00. I could have bought a $900.00 Maytag by now. Total disgusted with machine and customer service. Will never buy Whirlpool again and have told everyone by word of mouth and on facebook about this situation. DO NOT BUY WHIRLPOOL!

Do not purchase (Whirlpool products). Discuss guarantees with salespeople when purchasing! They are total sham and in fact borderline fraud! Purchased $5,000 dollar KitchenAid fridge only to have it breakdown after only 8 months. What they dont tell you is instead of recalling a product they give their repair personnel whats called a notice which means they know there are issues with their products!After much discussion and trying to return the product to no avail, I was told very adamantly my fridge would need to break down another additional 2 times before my fridge would be replaced with a new fridge. Forget about the cost of your food inside the fridge, they dont care! Just beware that their warranties and parts and labour are a complete and utter joke! My advice after much research if you can afford it buy Miele or Subzero product. Its more expensive but a lot less headaches in the long run! Ive eaten the cost of my KitchenAid appliance and went with a Subzero fridge. Dont believe the higher pressure sales pitch from salesman. Youre best to call a repairman and ask what hes fixing more often than not and 9/10 times he will tell you Whirlpool product! Customer service is a complete circus and gong show. Youll get further ahead talking to a donkey!!! Buyer beware! Whirlpool Canada/USA is a joke!!! Dont say I didnt warn ya!!!

Bought a Whirlpool Fridge WRS321SDHZ00 and it has been services three times in one year. It has been down for at least one month at this point due to all the service. Service History- Oct 15th 2018 - Fridge/ freezer started not cooling (Issues started) Oct,19th 2018 - Failed defrost (Tech Diagnosed) Nov 13th 2018 - Control was replaced, defrost heater replaced (Service performed) April 10th 2018 - Fridge started not cooling again (Issues started) April 15th 2018 - Tech diagnosed failed UI board (Tech Diagnosed) April 17th 2019 - Replaced failed UI for water/freezer dispenser (Service performed) May 23 2019 - Fridge started not cooling again (Issues started) May 23 2019 - Tech came out and diagnosed the issues as defrost thermometer (Tech Diagnosed) (They initially wanted the tech to come out May 28th but I had to explain this was not acceptable as I can not continue to be without a fridge like this) May 23 2019 - Request to have the fridge replaced.May 24th 2019 - Whirlpool called to notify they would replace the fridge.

We purchased a Duet washer in Feb 2011. On Nov 2011, it started making a very loud noise when it would spin. We contacted the warranty company, not realizing it was still under the manufacturers warranty. The warranty company came out and took a look and claimed it would be about $1500.00 in parts to repair. We contacted whirlpool and they also sent a service person that claimed the same thing. Both service people claimed that the other did something to the machine and it was the others responsibility to fix it. We have contacted whirlpool and the parts have been ordered. We were informed today that they are on backorder and will not be available until some time the middle to the end of January. When asked why they just dont replace the washer, the answer we received was that was not the policy.

I have purchased a Whirlpool Water Heater on May 21, 2005 from Lowes Model number FG1F4040S3NOV, Product number 0730261, Serial number 05181291061. It is one of the Flame Lock heaters that was part of a class action law suit. The lawsuit has been settled however. I have had three thermocouples to date installed and each time the heater has gone out after three to four days. The technicians I have contacted at Whirlpool all have stated something else is wrong with the heater even knowing that this model has been seriously defective from the beginning. They always tell me to do this and that to repair it. I do not have hot water as of the date of this writing. The original problem began June 19, 2011.

Brand new dishwasher and first time I started it I noticed the timer showed the cycle taking over 3 hours. When done I opened the door and there was some water in the bottom and the door was very wet. Dishes had not been washed. A glass that had turned upright had no water in it. The soap pod was still intact. I started over again and the same thing happened - two more times. The silverware is not clean either. Its going back!!! Im sure there will be resistance but we will deal with it.

My new Tridel Condo came with a brand new Whirlpool washer and dryer and the washer has not been working well since the beginning. After several service calls the repairman finally gave up and now were getting a new replacement. However its been a nightmare working with them trying to get this washer replaced. The Whirlpool delivery team and the service team cant seem to coordinate a time together for the replacement. We had to make a first appointment for the service guy to uninstall the old unit, the second appt for the delivery guy to drop off the new unit and pick up the old and a 3rd appt to install the new unit. Each appt has a 4 hour wait window. This is their standard procedure, which is totally inconvenient to customers. To make matter worse, the delivery guy came too early for a condo delivery (before 9 AM) and told us he will be back the next day. And he didnt show up. It looks like now we actually have to have 5 appts (including the 2 missed appts by their delivery guy) to have the washer replaced. All the time I wasted waiting for this delivery is worth more than the washer itself. What would be 4 hours X 5 appts = 20 hours. This is the worst customer experience ever. After 3 months of constantly calling Whirlpool and still no washer. Whirlpool needs to hire some competent people who actually care about servicing their customers.

I do like my Whirlpool refrigerator, but it started to not cool things anymore. I had to get it fixed. The professional I had come out to fix it said that these particular Whirlpool models didnt have a specific part they they needed. It also got built up with ice that needed to be broken down. Overall, I wouldnt buy this model again, but that doesnt mean that all Whirlpool refrigerators are bad. Just this particular model.