I purchased a new Whirlpool 3.6-cu ft Top-Load Washer (White-On-White) Model #: WTW4800BQ from Lowes on 11/1/14, which was only 3 ½ years ago. The washer began making noise during the spin cycle so we called for service. The technician claimed that the bearing pack needed to be replaced and the repair would cost $400. This amount is $20 higher than the amount I paid to purchase the washer. Because the warranty is only one year, I contacted Whirlpool today and spoke with a representative. The representative said they could repair it under the warranty. When I asked how to proceed, she then asked me if I had an extended warranty. When I replied that if I had an extended warranty, I would be using it. She declined any assistance. I now have to purchase a new washer after only 3 and ½ years. I own 10 rentals. I promise that none of them will ever include a Whirpool product again.

First twice the frame that holds the crisper drawers broken. We bought parts and fixed worked for only short time. Second we bought extended warranty from Home Depot for 5 years. At about 4.5 years ice maker started freezing up. The valve that controls the amt of water that goes in was broken. Had it fixed under warranty. Started having a little problem with it in a couple months. Lasted 8 months. Broke again. Froze up. Had to pound on ice maker compartment door to get open. Once again water overflowed. Froze everything up. Called. Of course our of warranty now expired. Called the guy that put the ice maker repair parts in. The part under warranty but now I have to pay for labor and them coming out to look at it. Now why would I want to put another defective ice maker in. I called Whirlpool. They didn’t care. We have many Maytag appliances in our home but they will be the last. The appliances they make now are cheaply made.

We bought a Whirlpool Dishwasher for a vacation home thinking it was a good brand. It was not a low end model. After two years of infrequent summer use it would start and then not complete a cycle. Looking on the internet I learned the control panel was known to be faulty. An appliance repair person also confirmed that the control panel was known to be faulty. Why are they allowed to sale defective appliances? I also feel Lowes Hardware is not without blame for unloading faulty equipment on unsuspecting consumers. What recourses do consumers have? I cannot afford another dishwasher after purchasing an appliance expected to last for years.

We purchased a WRS576FIDM refrigerator from HHGregg in August 2015 and immediately had problems with ice maker and door having condensation on it. I contacted Whirlpool who had a tech come to my house and verify problems. Whirlpool replaced it with a new refrigerator in November 2015 and w/in a week it had awful condensation on the outside of the door, dripping onto the floor and pooling water. A tech responded to our house again and confirmed the problem with Whirlpool. Whirlpool advised they would be sending out two new doors for our side to side refrigerator and said we should receive them within 4 to 6 weeks from late November 2015. I asked Whirlpool to send us a different model because this is the second refrigerator of the same model that has the same issues. Whirlpool refused. I have spent countless hours on the phone with Whirlpool, HHGregg, and waiting for service appointments and my patience is getting thin. I just contacted them today 2-9-16 to inquire about my doors since it has been well over the 4 to 6 weeks Whirlpool said it should take to receive them. The Whirlpool rep on the phone had no information about the status of the doors and said that they would have to contact the service company to inquire more about the status of the doors. He also said that under special circumstances, it may take an additional two weeks for certain door orders. I once again requested a different model of refrigerator or a refund.I tried to get HHGregg to allow me to return the 2nd refrigerator just days after I received it since I was having the same issues as the original one I purchased. HHGregg said they could not since the 2nd refrigerator did not come from them. HHGregg said that they did not know why Whirlpool sent me a replacement refrigerator directly and added that normally the returns go through them. I feel like I tried to do the right thing by contacting Whirlpool for warranty work, but I feel that if I would have called HHGregg I would have been able to get a different brand refrigerator which is what I really desire after all these problems with the Whirlpool brand. I did purchase an entire Whirlpool kitchen set from HHGregg. The only problems I am having is with this refrigerator.

We purchased our basic Whirlpool refrigerator model # WRT318FZDM05 from Lowes on September 13, 2019. We bought one of the more basic models available because we have owned higher end fancier refrigerators which have had multiple problems and not worked. So this is the 18.2 cubic feet top freezer model. About six weeks after owning it (conveniently just past the 30 day return window at Lowes!) we began to notice that our freezer wasnt freezing properly or making enough ice. There is only one control panel in this basic fridge so we turned it up. While this cranked up the freezer, the refrigerator compartment began to freeze its contents. So we had to choose between soft serve ice cream and refrigerated eggs and milk or hard serve ice cream and frozen eggs and milk! Finally after the holidays the certified Whirlpool appliance technician came out and recommended a repair with replacement of start device and control board. His report: Freezer not freezing, found the compressor turning on and off. The refrigerator was not even 4 months off the floor and the problem began when it was only 2 months old! When you call the Whirlpool number heres what they say: Welcome to the Whirlpool customer exp. For over a century weve believed in everyday care. Lets see how we can care for you today.Well, when someone calls with a very recently purchased refrigerator whose START DEVICE and CONTROL BOARD no longer work properly that person should be able to return the defective appliance and get a new one. Nope. Not with the Whirlpool experience. You are told that youll have to wait and see if those devices which are ten days away from being replaced in your new refrigerator will fix the problem. So basically NO do not buy from Whirlpool. Turns out a century of everyday care (??) hasnt taught them much about how in this century people need a refrigerator that works everyday!!!!

I purchased the French Door refrigerator only 7 months ago. It has been emitting a low pitched, loud, vibrating hum for days. I called the company and spoke with a well-trained representative who informed me that there needs to be a service call. When I mentioned that this did not indicate an acceptable situation for future dependability, I was pitched to purchase an extended warranty. Further… this company doesnt monitor Consumer Affairs. Quality and standing by a product are manufacturer qualities that were not evident during the call.

Whirlpool Cabrio Washer WTW5000DW - I have owned at least two other washers in my life, and I just recently bought a new washer/dryer set at HHgregg. Was told they are doing away with agitator washing machines in the very near future so this is my first experience with a top load agitator-less washer. This thing is AWFUL!! First of all it took a minute to get used to the weird popping, grinding noises it makes while going through the cycle (which I might add seems to take FOREVER). The other thing I hate about it is there is no way to add the fabric softener at the start of the wash in this model unless you have a downy ball of which I have yet to find at my local dollar store or even the KROGER??? So I run back and forth trying to catch the rinse cycle to STOP the machine (wait I might add) and then add the FS manually.BUT THE ABSOLUTE WORSE THING is - my clothes come out with SPOTS that look like lint all over them, and they wont wipe off unless you have a wet rag to do it with!! AND YES - I have cleaned this washer TWICE already since January with the very expensive AFFRESH. I wear scrubs and they are solid colors, so it really shows up and I have to wipe off every pair EVERY day before I put them on then roll a lint brush down them. WHO HAS TIME FOR THIS??? This is on my SOLID colors which is easy to see, I can only imagine the GUNK that is on the rest of my laundry!!! I dont feel like my laundry is getting clean at all!! I am divorced and money is tight - I paid around $500 buck for this piece of crap. I am already seriously thinking of getting me another one - the OLD tried and true kind with an AGITATOR! And yes I am ANGRY. Can you tell??

Purchased above refrigerator (WRF736SDAM13) over a year ago and it has been nothing but trouble. Ive had service companies out 6 different times. The doors never lined up or closed properly from day one. The final and last attempt to fix was putting caulk in the seal of the doors!! Left door does not seal properly and moisture builds up on inside. I requested several times for a new one and Whirlpool refused. Also purchased microwave, stove and dishwasher. Microwave went out 6 months after using it. They had to replace a major part. At least they did this at no charge. Just the hassle of having to be home 2 times to meet service tech. WILL NEVER purchase Whirlpool appliances again. Ive been using them for in all my homes in the past. STAY AWAY from this model.

My induction cooktop totally failed to work two months after installation. Whirlpool sent a repairman who told us it was the main board. He also said he was unable to locate any of that part anywhere in his computer. We called Whirlpool via our store, Ikea. They apologized, asked for 48 hours to locate a part, then said they would replace the cooktop if they were unable to find out. Almost 48 hours later, they hadnt located it and denied any replacement option. The parts cost is over $800. The cooktop cost just over $900. Whirlpool reps would only read from a script of legal warranty jargon. Then they said they needed 5 to 7 days. We had a baby visiting - we needed our stove. To me, an apology would be replacing that unit if the part wasnt available, not a verbal statement. Fortunately, we had the phone # of a local Ikea manager who told us to bring the cooktop to the store as they had them in stock. They replaced it with a new one. Over the years of my long life, I have bought many Whirlpool products. Never again. I need a washer and dryer, and will not be purchasing any associated with the Whirlpool Corporation. Thanks to Ikea, though, for standing by their customers.

I purchased a Whirlpool water heater about 9 months ago. The thermocouple went out and was replaced, but about three to four months went out again. Very disgusting.

This thing will not bake correctly, leaves pie bottoms raw, yes we use convection. We have tried everything to get it to bake correctly but to no avail. Top and control panel get very hot when only using oven. This thing is junk, taking it back to Lowes.

WHIRLPOOL MICROWAVE HAS HAD MAGNETRON GO BAD 3 TIMES IN 1-1/2 YRS! I bought a Whirlpool Microwave Hood Combo Oct 2009. July 2010 the magnetron went in it! December 2010 the magnetron went in it AGAIN! This time we had to pay the labor to have it repaired because it was 2 months outside the warranty period. We did not want to pay because we knew having the same part go twice in one year that something is wrong with it. Whirlpool told us that if it happened a 3rd time that they would most likely replace the appliance for us. Well....July 2011 the magnetron went AGAIN for the 3rd time! Whirlpool told us to take it to a licensed shop to have it diagnosed to prove that it was the same part as the previous two times, fax paperwork from the prior two times, and have the shop call in the diagnosis of the 3rd time. We did all that, and they told us they wouldnt do ANYTHING for us because it was outside of the warranty period! Well they knew that when they told us we had an opportunity to get it replaced! THE SAME PART WENT BAD 3 TIMES IN A 1-1/2 YR PERIOD OF TIME. We trusted that the Whirlpool representatives were being honest with us during those phone conversations. Whirlpool can not explain why representatives would give us hope of a replacement (although each conversation is documented by their login and employee ID number). So not only did I buy a brand new MSRP $619 microwave, I paid to have it repaired the 2nd time, and to have it diagnosed the 3rd time, uninstalled and reinstalled the microwave each time, the inconvenience of not having use of the appliance during each occurance, and the unbearable suffering of calling in to customer service and repeating the story over and over to each representative. My house is brand new (we moved in to it November 2009); we bought ALL our appliances from Whirlpool. All I get for an answer now is sorry. That doesnt help me any financially having to repair and now replace an appliance that has been in use for only 1-1/2 yrs! I have seen $39 microwaves from WalMart last several years, so what is wrong with Whirlpools manufacturing?! Customer Service is unreliable, untrustworthy, non-sympathetic, and insanely frustrating! My question for Whirlpool is...why cant you make a product that lasts better (better quality=longer life=healthier environment and happier customers)? Why cant you stand behind your products better? Dont you care about the impact youre making on us emotionally, financially, and environmentally? The model # is GMH6185XVS0 Serial # is TRY3111264.

I have purchased Whirlpool washing machine from A.K. Gandhi, Nagpur Vide. Invoice no. ** (JAYANT **-PURCHASER). Item detail - (LLP2187) WPL W/M STAINWASH DEEP CLEAN 65-GREY 10YMW 3110601162712159, Nagpur on 5th Sept 2016, since two days it was making noise, so I called service centre on 22nd Oct 2018 and he attended same, accordingly him gearbox has problem and needs to replace for which expenses would be around Rs. 6000. Its very surprised how can machine develop such big problems within two years of use. I have paid him Rs. 350 as service charge. Serviceman mobile no. **. You are requested to do needful and arrange to replace faulty part within early period as fault lies with company. How can company supply such machine, which develops problem within two years. This machine is in extended warranty period.

I have had my Cabrio for a year now and quite frankly, I find more satisfaction taking all of my laundry to a local laundromat. There is no soak cycle and when you have a kid in sports, that doesnt help. There is no agitator, and I am now convinced that they were originally in all washers for a reason. My clothes have all worn out and are shredding, not to mention my very expensive bath towels that I am now cutting into rags. This was the worst purchase I have ever made in my life and will never even look at a Whirlpool again. When I bought my house, I had a Maytag that was 35 years old and it did a better job than the new Cabrio. Should have stuck with that brand!

Error f1e2 error. Washer less than 2 years old.

I bought a compact washing machine and 4 months later it broke, needed a CCU board. To make a long story short now the machine is 7 months old and still broke. Whirlpool cant locate a part for it nor do they want to replace it. I think its time to get a Lawyer involved. Ive been calling for weeks now and have gotten nothing but the run around from all very Rude employees. Im turning this over to a lawyer. Im done dealing with Whirlpool. For a large corp Im very aggravated and severely disappointed with them. Wish I never bought their appliances. NEVER AGAIN.

I paid for an extended warranty. Dishwasher not functioning properly- it stops mid-cycle. Had a tech out twice who insisted nothing was wrong. Extended Warranty customer service refused to honor my claim. Will never buy another Whirlpool product again. And buy an extended warranty! SAVE YOUR MONEY!

55 Gal Electric New in 2003 / Limited Lifetime Warranty - I paid quite a bit more initially at Lowes for this unit. Its stainless lined. I have had numerous problems since purchase. I had to replace the sensing element in the Smart Box in 2006. Then the lights started flashing again making a humming sound in the box. I took each piece apart in smart box and cleaned them, which seemed to help. Then the upper element that is also stainless that requires a special wrench to replace went bad according to the blinking lights. Lights stopped after several resets. Now, the water is boiling out of the top of heater and they tell me its the seal in the element that I never replaced. The cover for the element is off. Water cannot possibly build up and force out the top of the cover of tank. I am not an idiot, yet they tell me that is most likely the problem. They didnt listen to me long enough to properly assess my concern. Every plumber I talk to says its the separation of the liner inside the heater. Nonetheless, I have a water problem now in the basement and have never heard back from Whirlpool as promised with troubleshooting guide on an email. I am sick of calling and getting the runaround with every issue. The warranty is horrible for the consumer. Sure, you have a limited lifetime warranty, but when you cant get proper information when you need it, what good is it? Made in America is why I bought the product. I also need a new washer but will not be searching in the Whirlpool line due to their lack of care with an important issue with my heater.

Bought Whirlpool French door refrigerator. Unit was defective when delivered and I told them so. That was on 06/14/2013. Unit got progressively worse and finally has quit completely. At Whirlpools suggestion we bought a Whirlpool Repair Plan Plus One (another scam) for $300. Repairman came out and told us the refrigerator couldnt be fixed. Now Whirlpool suggests their only option is for us to buy a discounted model. This refrigerator went from bad to not working at all in less than a year and a half. Anyone that buys a Whirlpool appliance with knowledge of how they treat customers and back their products has to be a little crazy.

We bought all Whirlpool Gold Appliances when we re-did our kitchen 5 years ago -- fridge, d. washer, oven, glass top stove, and microwave. Recently I noticed a pool of water in front of the fridge. Turns out there is a sticky grommet problem that prevents moisture from draining into a pan on the inside back bottom of the fridge. Whirlpool will send you a replacement part that is totally different than the original poor design (a long hose affair) BUT wont pay for the labor to put it in unless the unit is less than 2 years old.I watched a video showing how to do it, but it looks pretty tricky and involved plus risky because you can break the drain pan in the process. Spoke with a Whirlpool rep and a supervisor -- both admitted to a quality problem but got nowhere on the labor. Theyre sending the part, and the supervisors supervisor is supposed to give me a call, so well see if they eventually do the right thing and cover the labor. I mean cmon... the parts obvious a bad design, or they wouldnt be sending a totally redesigned part! Covering the labor only if its two years old or less? Even the Whirlpool techs online are saying the problem happens after about 4 years! The grommet gets sticky and wont drain due to heat from the compressor, and that takes time to happen. Ill update this when I hear back from Whirlpool.

I purchased the Whirlpool Cabrio washer and dryer in 2007. They have been the biggest pieces of junk. One year after my purchase, the water pump broke and had to be replaced for $100 and that is with my husband doing it. Then the dryer broke twice. Now, the washer is not spinning. He took it apart and I purchased $80 in parts. It still doesnt spin. He thinks the motor went and it gives a p50 code. This washer does make holes in your clothes. So many of my summer tops were ruined because of this washer. A friend has the same washer and she started getting the holes in the clothes, so that is how we figured it out. Today, I went and picked up a washer at my rental home, a GE that is 10 years old. My clothes never felt cleaner and it runs like a charm. That Cabrio always smelled like mildew because it seemed like all the water didnt drain out of it and it would sit in the bottom. What a shame. Its only 6 years old and I paid $800 for it and for parts. My husband cant wait to put it on the curb on garbage day. My friend warrantied hers and when the guy couldnt fix the problem, they gave her partial money back. At least she got something. These should be recalled and we should get partial money back depending on how old it is. I will tell everyone not buy these. They are the biggest pieces of junk!

I have a Whirlpool gas water heater that failed after only three years of operation. My previous water heater in the same spot lasted 18 years. The problem is a defective thermo coupler design that burns out if a filter you cant access isnt cleaned every three months.

I purchased new and installed my heater in 2003. SN: 0253109845, MN: EE3J50RD0454. I started removing and replacing or cleaning heating elements in 2011: pretty good service. In 2015 I noticed black and brown water coming from the hot water taps. I opened it again, cleaned it, and realized anode replacement was required. That is when trouble started.I tried everything usual including 4 foot cheater bar, heating the coupling, impact wrench, tapping with a hammer, etc. Finally found a 700 ft-lb. pneumatic impact wrench on sale at Harbor Freight. After serious wear and tear on my air compressor and about 1-1/2 hours of work with the impact wrench, I got it out. The threads were messed up some, but I did not look close. I had to put the 1-1/4 inch head back in to return it to service while I found and ordered an anode. Could not get one from Whirlpool and could not buy one in Lowes where I bought the heater.The surprise was when I cleaned the threads to put the head back in, I had to use almost as much time and torque to get it to stop leaking as I did when I took it out. Then, when I did try to install the new anode, it required to same effort. Conclusion, There was some kind of imperfection with the threads in the coupling that messed up the threads on the initial installation of the anode, which made it nearly impossible to remove. Whirlpools quality control stinks. The next one will NOT be Whirlpool.

Whirlpool Duet Steam Washing Machine WFW9500TW had F35/Suds code 14 months after we purchased the washer. Hose / air trap is clear and the hose from the analog pressure switch is connected properly. The appliance tech we had come out to look at the washer determined that the analog pressure switch was defective. He told us that this is a common problem with this washing machine. Whirlpool supervisor, Michael (female), stated that they could send a tech out - and charge us for the call - to diagnose the problem. She refused to transfer me to someone who could help and couldnt comprehend that the its out of warranty excuse isnt a proper defense for a product defect. There are many posts about Analog Pressure Switch problems with this washing machine.The posts about Whirlpools poor customer service are absolutely accurate. They are horrible - good luck in getting them to work with you. We read the reviews for the Whirlpool Duet Steam washing machine before purchasing one and we disregarded the bad ones as disgruntled customers. Please do not make the same mistake we made. After my conversation with their customer service dept today, I will never buy another Whirlpool product again. Defective parts happen. Refusing to fix a known problem is unacceptable.

Have had this washer for one year. Clothes have never been clean since day one. Dark clothes come out with white marks all over. Having to use an extra rinse cycle or set on bulky items - whats the point of a high efficiency appliance? Still not clean after that anyways. Stains such as chocolate and toothpaste still remain after washing and my husband complains of finding small holes in his clothes. Lid needs to be left open at all times or you get a funky smell. I am using the HE liquid detergent, even tried a cold water product for cold washes. I hate this washer. Wish I had my 20 year old Kenmore still.

We purchased this dishwasher in June 2014 while putting home back together following fading of our home. Within 6 months of purchase the dishwasher was doing dry washes, and getting very hot touch. Whirlpool sent out repairman who replaced parts that had melted inside dishwasher and the control panel. This same thing happened 2 more times. A repairman came and repaired and replaced parts. In May 2016 it once again was running so hot that it burned hand when opened. Once again repaired but this time it started leaking from front dishwasher. When we talked to whirlpool they sent out repairman and assured us they would pay for any and all damage it had caused. They also replaced dishwasher with Maytag of our choice which they covered all cost. When installers pulled out the unit we learned the dishwasher had most likely been leaking the entire time, water damage up entire wall, cabinets ruined, countertops had been bubbling and separating from wall, floors ruined. We followed all instructions and had three contractors come to do estimates that were from 27,500-30,680. Whirlpool then sent outside adjuster because of cost. We have now received offer of 6700 and told we could take this or submit to our insurance company. Also we now have Mold in kitchen which they are aware of and we think the flooring is now rotting and breaking.

I purchased a Whirlpool accubake oven in 2010. The repairman has been out to repair it 5 times. Thats right 5 times. It wont maintain the baking temperature. They have changed the mother board, the ignition switch, the harness, and the thermostat. Every time the repairman leaves it works and then I go to bake something and it doesnt. Once it reaches 350 degrees the oven cuts off. You can hear it trying to ignite but its like the fire doesnt catch. I have to shut it off, press bake and heat it up all over again. This is so annoying. Bad thing is I like the look of the oven but clearly this is a shotty product. I will never buy a Whirlpool again.

Whirlpool works great. I need another large shelf space between 2 shelves. The refrigerator has a small one but the large one I prefer.

I bought 2 Cabrio washing machines for my two homes along with the matching dryers. They worked for about 3 months, then the washers displayed OL Error during any wash cycle. I tried to contact manufacturer and have not been able to get service without charge. After reading the many posts I am not sure if I should dump both or start investing $$$ in service calls.

Rather than replace the heating element in my 15 year old Sears dryer, I opted to replace both my Sears washer and dryer with a new HE Whirlpool. It was the biggest mistake that Ive made. The washer does not have an agitator and the clothes turn into a twisted knot. Deodorant did not wash out of load of three sweaters. When I called tech support, the woman told me that the washer met specification. I suppose that means that it uses only limited water but has nothing to do with the cleanliness of the finished load. I was told by the repairman that future calls regarding unclean clothes would cost me despite a warranty that I purchased from Lowes.He suggested that I wash on using the Bulky Items setting and with a specific laundry soap. The setting provides more water but without the agitator, my clothing turns into a huge knot and comes out of the machine dingy despite washing loads for over 60 minutes at a time. My electric bill has gone up because I have to also add an extra rinse. The machine frequently become unbalanced. My dryers seal started loosening up two years after my purchase and finally became twisted in a sheet and ripped itself loose. Whirlpool has lost all future business with me.

In open concept homes, manufacturers need to consider the refrigerator’s noise — ice makers included. We hear every single clink and buzz. We love (and prefer) the french door concept, but the freezer drawer, when it’s fully loaded, is difficult to open and close. Also, the stainless steel scratches WAY too easily.

I got a Whirlpool washer front loader model number wfw9151yw. Every time I wash sheets, they go into a ball. I called Whirlpool. They sent out a service guy. He said do not wash sheets in a front loader. I called the store. They said call Whirlpool again. Then the second service guy moved the legs down about 1 in. The machine still not right. I feel Whirlpool should replace the machine or give me my money back.

Bought a Whirlpool Refrigerator Gold Series on 11/04/2014. It stop working on 6/25/2014 when I called customer service to report the problem. Received the visit of 2 serviceman on 3 different occasions and still dont know when the refrigerator will be fixed. What should I do?

Whirlpool Slide-In AquaClean Technology - My beautiful, modern oven is no longer. After 4 tries doing self-cleaning my oven was still dirty. I did have to wipe out the water (although I measured it) before I could take the scraper/sponge provided by Whirlpool to assist in the cleaning. Scraper bent - sponge disintegrated and I still have a dirty oven. Called service. My pleasant service tech informed me the water is only to reach 250 degrees! Really! My dinosaur of a Whirlpool cleaned fabulously! New technology has turned mine into an on your knees, scraping and broiling fool. Fool because I bought into the whole Aqualift Technology. We cannot use any kind of liner, etc. This slide-in may look great but the labor required to keep it that way is beyond this OCD person! So much for my efficient new kitchen. May the engineers who designed this technology be ashamed of this product. It is not even a self-steam cleaner!

In my wildest dreams I wouldnt have expected that changing a burned out light bulb on a 7 month old microwave would put us out of commission for over a month. Its been 30 days now and Im told it will be more than 2 weeks before the part comes back in stock. Whirlpool had such a good reputation years ago, but thats history. This is a disgrace.

Suddenly I get a person who sounds enthusiastic about customer service after a day of writing bad reviews on Lowes and Whirlpool sites and as many consumer review sites as I could find! I had even called Lowes corporate offices! A repairman is coming out tomorrow (after being told that one could not show up until September!) to check the NEW refrigerator that has frozen all of my produce and soften my frozen foods! I am 12 miles from the nearest town and took over half of my food for the month to the dumpster site today because it was spoiled. If you have a problem and no one has instructions to help you or is listening or even cares.....MAKE NOISE! IT WORKS. Know if your state has a consumer protection bureau through its government (usually Sec of State or Atty General offices).

I purchased a Whirlpool microwave model #WHM3205XVS1 on October 2, 2011. The handle broke off in little pieces and was repaired in March 2012. Handle broke off again in little pieces in September 2012. This will be the 3rd handle that will continue to break in little pieces every 6 months. According to both repair men that were here, this is their comment: No customer abuse, this is a very common problem with this model. After to speaking to 3 people at Whirlpool, I was told by everyone, This is cosmetic problem and we will not fix after the 1 year manufacturers warranty is up. I started with the the first person, went to her supervisor, then went to her supervisor. I am now waiting for a call from a manager although I was told I will continue to get the same answer no matter how far up the chain of command I go. So, I was told that it is okay to have 2 screws sticking out holding the remaining part of the handle that is left, because it is a cosmetic, not a functional problem. I will never stop with Whirlpool. I will call 4 times a day if necessary. I will never purchase another Whirlpool product again! I will tell everyone I know not to purchase one of their products. Be careful. They manufacture products for many other companies, i.e., Sears, Amana, Jenn-Air, and many, many more.

Efficient. I like the look and the controls. I trust the Whirlpool brand, but have purchased other brands. This is probably the best dishwasher I have owned. My only regret is that it is louder than expected.

Informed that because washer was 1 year out of warranty. It was 2 years old. Parts were not guaranteed. Cost to repair $400.00 including labor. Maytag Store came to my rescue and it only cost $200.00. 2 years later, washer is not filling with water correctly. Have mixed feelings about repairing or replacing. If replacing, how to select a reliable washer. How do you select, if when we purchased this washer it was rated very high. Whirlpool does not help with any issue. They were extremely rude. Felt helpless dealing with them. Need a new washer and have no idea which brand to go with.

I am thoroughly disgusted with Whirlpool. How dare they sell the garbage that they put out? I didnt buy the extended warranty when I bought my Whirlpool washer and dryer. Why should I when I put out all the money that I did? I havent had the product three years and had to have a repairman out to fix. And then the parts are so expensive, and they are cheap Chinese junk. I dont understand how something with a name like Whirlpool can put out such a disappointing product. Never again will I purchase your product. And I certainly will spread the word. Greed comes to mind for me. I see you have contributed much money to campaign (Republican). Have you ever thought about what you do to yourself? How absolutely disgusting you are.

I purchased a Whirlpool Cabrio Washer WTW6200 & this yr purchased a newer dryer w/ steam capability. I wish I would have waited a couple months for a new washer that yr and purchased the one with no agitator inside! But my washer died that day & I needed one & NO ONE informed us of the changes or problems of this agitator at the time of purchase. I have had this service several times my first year and the agitator replaced I believe twice. But it still destroys clothing. I called 1 month out of warranty and even though they had been out several times the first year for the same issue, they would not help me! Yep, even after the 1st year they said to get things done I had to purchase an extended warranty even though this was a mfr issue no doubt! So, 3-4 years later I still am dealing with the very same issue over and over with NO RESOLUTION in site and $900 in the hole for this washer and I am losing money with clothing damage weekly!Even today I had two pair of jeans, $98 ea rec these terrible uniformed marks all across the legs making them unwearable! At least for where they were intended to wear them at. They are now yard jeans...yep $98 expensive yard jeans now!!! These were my good jeans which I cant afford to buy more nor replace them so I have to do without. We cant wash anything with strings such as hoodies, shirts or baby clothing with spaghetti straps or little dangle things; we have to use the laundry mat and come home & dry w/ my Cabrio steam dryer which I love. Most everything I have to use zipper net bags but even then things still can get destroyed, especially if a hole gets torn in the bag from the wings of the agitator as you will see in the below photograph. I currently have & own an expensive washer I purchased from HHGregg by Whirlpool replacing a previous whirlpool I owned for 22 years! Yep, Im wishing I had it back & put the $200 some needed to repair it! Please Whirlpool will you please do something & make this right once and for all. I dont have $900 for another washer. I just want to be able to use my washer without it destroying everything I own. I have darn photos of what this is doing and you wouldnt believe it. It took us an hour, yes an hour to untangle a top that became entangled in the flaps on the agitator. This is the worst design I have ever seen and needs to be recalled once and for all and either fixed or replaced with new machines of equal model with the agitation issues resolved or removed & with no issues or further costs to your customers! Why would you honestly believe that an agitator with wings coming off the bottom that are not attached to the bottom would serve some type of positive purpose in cleaning clothing? All it is doing is tearing them to shreds, tangling them up, doing things to hoodies which make them unrecognizable after ripping the cords so hard out of the hoodies that Ive seen them shred the material across the collar area and opening of the cording completely ruining hoodies ranging from $35-$75 a piece even after placing them in mesh bags! Why did we keep placing hoodies in the machine? Well with 4 children at times they just dont listen or get all the info as to what is going on with the machine as 3 were college kids coming home periodically & yes, to do their laundry. Look, lets talk straight. You as a company from what I have learned from appliance salesmen locally and regionally, you knew this was wrong and knew this was your last ditch effort of an agitator before you knowingly knew you were going to an agitator-less unit on your washing machines & already had one ready to go out on the floors. I know that you Whirlpool CEOs knew this unit was a bad call but chose to ignore it. You had to know it because there was no way this could have passed quality control. It had to have failed sometime in its trials showing you the issues of the wings. Unless you never did any quality control on this unit and just rushed it through? Please to the CEOs of Whirlpool, I am asking you to make this right if not for good standing of your company do it at least for families like myself who cant afford to buy another machine and are now stuck with NEW machines yet going to Laundry mats. This was to be my last washing machine I would buy hopefully. I am 54 and was not planning on buying another. How do you think this makes your company look???? Im just so tired of dealing w/ Whirlpool to only hear I have to purchase a $400 extended warranty with no guarantee that they will fix the issue. If an attorney wants to step in & believes they can help us and maybe others then Yes please help us because this is absolutely ridiculous and is a product that needs to be recalled. We are out so much money now and like I said we are to the point we cant purchase another washer. We had to purchase all new appliances as they all began going bad around the same time.

Have had it replaced. It is not a great value. Need one with freezer on the bottom. Will buy another brand. Not 2 years old making noise and it sounds like someone pounding on the side after the doors are open. This is a side by side fridge and has space but I question when this will go out.

After months of careful research and comparison, I finally bought a pricey (over $2K) Whirlpool refrigerator with a bottom freezer and French doors with water dispenser on top. I really did not want any fancy features, just narrow doors because of my small kitchen, and a fridge on top because of my back pain. Since the date of purchase in May, 2014, I have had 4 service calls. The first was covered under warranty, but no cause of the sheet of ice collection and underside water leakage was identified; I did, however, receive a somewhat patronizing lecture on the importance of thorough reading and comprehension of the owners manual, and a statement that most of my service calls are for customer education. A follow-up service call, a few weeks later and also covered under warranty, identified the cause of the ice collection and water leakage: a faulty duck bill little piece of plastic in the drainage system that is a problem well known to Whirlpool. In mid-June of 2015, the ice maker had to be replaced, to the tune of $360.00. Today, I had a service call ($103.00) and received an estimate of $405.50 to replace the broken freezer drawer slides, which prevent the freezer drawer from fully closing. I will be applying that $405.50 to the purchase of the simplest model, non-Whirlpool refrigerator available, and have the Whirlpool hauled away. Besides the problems noted above, the center of the refrigerator freezes the food, while the freezer compartment arbitrarily defrosts. There are alarm icons that go from blue to red to alert you of the need to replace the (expensive) ice and water filter, refrigerator air filter and crisper freshener. Alarm bells ring to inform you that the doors have been open too long, but nothing alerts you to the fact that the freezer door is not completely shut, or that the freezer has gone into defrost mode because someone inadvertently brushed up against the control panel and changed the settings, or that water is pouring freely out from underneath the appliance. I have had to change my buying habits because fridge holds at least 15% less food, even though it is the same cubic footage as my previous (top freezer) one. Freezer contents easily slip down behind the top freezer drawer and jam the door open. I have to take most frozen boxed items out of their original containers and pack them flat in freezer bags to get enough storage. Some tall bottles do not fit anywhere in the refrigerator compartment, and have to get put in sideways. Even in the absence of mechanical problems, using this refrigerator is like packing and unpacking a suitcase many times a day. While Whirlpool customer service personnel were not overtly rude, there were dismissive and condescending overtones in some of the questions and directives I received from them, and another insinuation that service calls would not be covered under warranty if they end up being for the purpose of customer education. The extended wait (7+ days) for appointments with a Whirlpool-certified appliance repair company, along with the customer education exclusion, were absolute deterrents to the purchase of the extended warranty. Besides my personal disappointment and disgust with the purchase of this appliance, I am sad to see that the Whirlpool brand has slipped so far in product design, quality and customer support.

Extremely unsatisfied with their customer care. I purchased a washer and dryer 18 months ago and did not choose to purchase an extended warranty. I currently need a main control board replaced after the machine stopped spinning and draining. I hired a wonderful handyman, who originally suspected the lid--locking mechanism was the problem. When that was replaced and the machine still wasnt functioning, he determined the main control board needed replacing. This is a manufacturer defect and costs approximately $300 for the part, not including labor. Of course, my machine is no longer covered under the extremely limited manufacturers warranty that only lasts for 12 months, so I am stuck picking up the bill. Once done with all the parts and labor, its cheaper to buy a new washing machine especially because they still wont add a warranty to it after its fixed. I think its absurd that a manufacturers defect isnt continually covered under warranty no matter how old the machine is. Customer service continued to tell me I should have wasted more money on a company that doesnt care about customer satisfaction and purchased an extended warranty originally. Horrible investment! Will never purchase Whirlpool appliances ever again!

Clothes come out of washer are soaking wet. Despite multiple repairs within the warranty period (1 year), the problem was not fixed. Each time a separate part was replaced. I would consider this as a manufacturer defective product. Despite multiple complaints to Whirlpool customer service, they would not replace the unit. Problem continues and now the warranty period is over and I am paying for fixing the same problem. I would not buy a WP washer again.

I purchased a gas hot water heater from Whirlpool. I have had problems with it since it was new. Whirlpool kept sending repair parts, which I installed, until the warranty expired. Now they say “Sorry Charlie, the warranty has expired.” The water heater has never been fixed. They just dragged it along until the warranty expired. Whirlpool has no complaint department or the repair place will not give it to you. They told me there would be no use for a complaint department. They would just tell the same thing the repair was telling me.

I love the way the clothes are clean when I wash them. I also love how well they are rung out when I get them out of the washer to be put into the dryer. The washing time isn’t too long either as compared to other washers I’ve used where it took almost an hour to wash and the clothes didn’t seem as clean.

The machine never allows enough water to clean the clothes and I do not have the option to add more water or to spin the clothes again. The maker of this machine must think that people do not have the ability to know how to wash clothes or think for themselves. I need a washer that I can tell to add more water or just spin these clothes again. Very disappointed. I need an older model that I can control.

I purchased both the Cabrio washer and dryer because my dryer stopped working, it was old, and I knew that soon the washer would too, and wanted to modernize my set -- it was my moms old set. I was thrilled to get it delivered and should have had the delivery man from Lowes take it right back, when he told me they had just come from picking up one from another lady who was thoroughly dissatisfied with hers.Well, it didnt take too many washings for me to understand why that lady was upset! I really wish I had done the same thing! EVERY load of dark clothes have to be wiped off to get off the disgusting wet lint thats all over the clothes! Thats been going on since DAY 1! In every load, the clothes do not get completely wet and I thought I had combated that issue by having a pitcher of water always available to pour onto the load, so the sensor will add more water... That doesnt work, I now see!!! I just noticed last night lots of wet lint was on my fabric shower curtain liner, and I was thoroughly upset! I just never feel as though anything I wash gets clean. I truly wish I had come across this site BEFORE I purchased my set, and I would never have done so. Is there ANYTHING that can be done for people who have purchased these horrible appliances?

I love my Whirlpool LP Gas Range. Cooks great and bakes wonderful stuff. Also has a drawer under to hold pots and pans. Self Cleaning Oven. I do a lot of baking and I cook three meals a day. The burners are easy to clean off on top. I try and wipe spills up in the oven as much as possible, It has everything on it that I love, except it could have a plug in which would really nice.

My refrigerator is a side by side and its freezer compartment is small (width). Whirlpool is always my brand of choice for household appliances. I personally would not choose the side by side design again but I would choose Whirlpool.

MODELGR673LXOQ WHIRLPOOL RANGE - I purchased this range in January 2014. It is a good-looking range with a ceramic top and a convection oven. It has burned more food in a year than I had burned in several years. The top burners get red hot no matter where you have them set. They turn on very hot, then turn off and after a while they are red hot again. Cooking anything that requires a medium or less heat burns to the pan bottom. The oven works alright as a regular oven but when put on convection it burns the food closest to the fan before the rest is cooked. The company sent a technician to check the stove. He checked the temperature of the oven and said it was running too hot. He changed that setting and the first time I tried to bake it took forever. I reset the oven back to where it had been. The tech made no attempt to check the top burners as he said they couldnt all be bad. I hate this stove I had my former stove for thirty years and never had problems with it.

Whirlpool Cabrio Washer model # WTW6800WW1. Bought it July 2009 and it broke Jan 2017... 7.5 years old. Cost to repair $715.00. The technician recommended that I just go ahead and buy a new one... not worth the while to fix. I paid $900 for this machine in 2009. This is an expensive machine, not a cheap ass one. Shame on Whirlpool for selling products that dont last and for making it unaffordable to fix.

We bought an oven built in from IKEA - Whirlpool. It didnt work from the beginning. We called for a technician, who comes in the next day, took the defective part and ordered a new one. Took two weeks to arrive. Now I just found out that I will have to wait another week for somebody to come and install the replaced part. I am very disappointed with their way to serve me as a client. I explained to them that itd be nice if the technician it will come at the first hour in the morning ex. 9 am so I can go back to work after that. Which is not possible. The tech is more important than you as a customer. The technician will give you a 2 hours windows to arrive and after that who knows how long it will take the repair. So far I have this build-in-oven in the kitchen just for design, is not useful I doubt that it will be working soon. The lady who called me from Whirlpool Canada was giving me theyre the option in the manner or take or leave it.To be honest, I regret buying this oven, so far I havent used. Wasted my time trying to get them to be more efficient, but got the message from them that I dont matter. Never been treated so wrong by somebody who is working in customer service. The first call it was coming from a company which is located in Maple Ridge, BC phone number 604-466-5597 and when I insisted on having the repair being done asap they hung up on me. I asked for supervisor or a manager, and they told me they are not allowed to give any of those on the phone... Buying this oven was a mistake, trying to deal with them another mistake. I dont recommend to anybody this oven or dealing with Whirlpool Canada.

I have a two-year-old top of the line Whirlpool Duet Steam washer. Cleaning performance is adequate at best, but my biggest complaint is about the visible mold buildup that collects on the water dispensing plate as well as on the detergent, bleach and softener dispenser and rubber lining of the washer opening. I have cleaned the removable detergent dispenser weekly since purchasing. The water dispensing plate has a continuous buildup of thick black mold that can only be removed with a tooth brush and bleach and only a small portion of those openings are reachable. I have cleaned the machine with Affresh as recommended and exactly as the manufacturer recommends. Nothing changes! I contacted Whirlpool and was told this was normal for all washers in which some moisture always remains and that I should continue to clean and leave the door and dispenser drawer open to allow the areas to air dry. So, I have done all of those things for the past year and nothing has changed! I received notification that a class action suit had been filed against Whirlpool for this mold issue but have not been contacted in any other way. Not only is this mold visibly disgusting but certainly is worrisome from a health perspective. When I contacted the company a second time, I was told there was nothing that could be done and it was in no way a design flaw on the part of Whirlpool.

This microwave had been the best I have used for several reasons. One is the modern design that goes with our kitchen. Two: it heats the food very quietly and produced an even temperature through out the food. Three; The inside of the microwave is easy to clean out.

I purchased a Whirlpool washing machine from PC Richards in Lake Grove 15 months ago. I paid $590.00. I had to call PC Richards back because it sounded like the machine was not spinning right. The servicemen came back and said nothing was wrong. It was supposed to sound like that. Now the machine stopped draining and spinning. I went to the store and they handed me customer service numbers and said they could not help me. I contacted Whirlpool online and received a phone call from a woman that gave me a lesson on how to load the machine and put soap in it! She was a very polite woman, but, gee, that didn’t solve my problem.After 4 days I was able to get through by phone and was told to call service. I contacted Mahler Appliance. He looked at it and said he couldn’t fix it and took a check for $81.47. He told me to call Whirlpool. I called Whirlpool again and got their service people. The gentleman came and could not figure out what was wrong. He tried a few things and said it was probably the main board. He said to call Whirlpool, but they most likely won’t give me back my money. He could charge me $460.00 for a new board per his supervisor. I just paid $590.00 for the machine and another $87.00 to some guy who took advantage. He left with an $87.00 check and I still have a broken washer. He did tighten up a loose wire he said he found and told me to try it and good luck. So I tried it. I put clothes in and turned it on.I came back about 20 minutes later to see if it continued to run and I slipped and fell on the ceramic floor because water drained out from somewhere and went all over my floor. I have injured my back and elbow from hitting the hard floor. I also have water all over the place and finally a very broken defective washer. I am angry. I hurt myself and have spent close to $1000.00 and I still have no working washer and no way to buy another one. The washer is 15 months old. That’s brand new to me. There was obviously a problem from the beginning. Whirlpool has always had a quality name for years. I would hope that they would stand by their product and fix my washer for me. It is obviously defective.

Model no. WTW4950XW is a piece of pure junk. Bought this machine 2yrs, 4 months ago. I just replaced it and to be sure not with another Whirlpool. The machine went out. Just quit. Nothing on control panel (computer). Didnt call for service tech as this machine has been crap since I bought it. Tried to return it but couldnt after I first used it. It would only give hot water on 2 cycles and that was on bulk or delicate. The regular cycle would only give warm but actually it was cold. Not enough water for 6 pieces of small clothes on regular. More water on delicate. Didnt wash very well. Clothes were not really as clean as they should have been. I used to only buy Whirlpool appliances but have now switched. They are bilking the consumer with subpar machines.

Purchased side-by-side model fridge, and within a month, the ice-maker froze up. Within a year, the relay switch failed, and caused the compressor to fail. What a lemon. Also, the clear bins in the door of the fridge side, have all cracked. Whirlpool says it is a cosmetic issue, but I think it is hazard and a material processing failure during their manufacturing process. They obviously would not cover any cosmetic issues under the warranty.I was one of the lucky ones, at this point, as the repairs were under warranty (expensive compressor, only by one week), had to buy an extended warranty to cover me in the future. I was only out the cost of extended warranty, and a fridge full of food. Lucky me. Customer service is worthless for any issues. I dont think Ill buy another Whirlpool product again. Buyers beware.

Do not purchase Whirlpool smart freestanding gas range model number WFG975HOHV. I purchased the range and the refrigerator around Christmas of 2018. The first time I turned the oven on to make Christmas dinner the carbon monoxide detector alarm went off. I have tried to use the oven twice after that and the same thing happened. The oven also never gets to 350. I spoke to Whirlpool who said to unplug the oven. They stated a technician would be sent with a carbon monoxide detector and to conduct repairs. The technician came and could not get the oven to 350 and the carbon monoxide detector alarmed. He stated he has to order parts and return to complete repairs.This is a brand new oven that I could not use because the carbon monoxide alarmed and the oven was not heating to 350 because it keeps restarting every few minutes. So here I am not able to use the oven for over a month and waiting for parts for a brand new range. Do not waste your money on Whirlpool products. Also the customer service has no empathy knowing their products are defective.

Had the fridge 5 1/2 years. Freezer quit working was told by 2 different repairmen it would cost $800 to repair. Called Whirlpool, was on hold 45 minutes, literally, both times I called. They could not help me. Called the corporate complaint line. The man I talked to was such a smart **! I finally said I cannot believe you are talking to me like this, I have bought Whirlpool for 35 years. He backed off slightly. Still couldnt help me. BTW, I LOVE my new Samsung refrigerator! Will NEVER buy Whirlpool again.

As I write this, I am on my 5th service call in four months of ownership. The machine runs short cycles and requires us to not only do an extra rinse, each load requires an additional Quick Wash (with extra rinse) to get the detergent out. We use so little detergent that a 75 fl. oz. bottle has lasted four months with over 50% left. The techs Whirlpool sends are great. The call center first level people are fabulous. The supervisor is not helpful proclaiming that it was fixed. However, we still have to re-run the clothes every time.

My refrigerator is 6 months old and already has rust and leaks. I am told it is because I live too close to the beach. Do not buy their sub-par products which come along with absolutely awful customer service. Will never purchase anything Whirlpool again.

Whirlpool over stove microwave/convection oven model GH7208XRY-4 - I purchased this top of the line unit in April 2012 for a vacation home kitchen remodel. It wasnt installed until June 2012 and stopped working in May, 2013 just after the warranty period expired. The problem was with the touch screen panel that went blank and the fan/light control switches also failed. This unit has only had light use since my wife and I are retired and use it primarily for heating tea/coffee. I contacted Whirlpool customer service and they graciously offered to cover the cost of replacement parts but I had to pay a service charge of $125. The factory technician said the whole door needed to be replaced since the electronics were not readily accessible so it took about a week to get the replacement door which turned out to be the wrong one and needed to be reordered. The technician finally replaced the door and the faulty fan/light switch. Within a month the fan/light switch failed again but was still under warranty so it was replaced for free. A little more than a year after the last service the touch screen control panel began operating by itself changing screens and beeping randomly. This was somewhat disconcerting but the unit continued to work pretty normally until my wife placed a small plate of leftovers in oven to be reheated for 1 minute. She walked away to do other things and forgot about the food in the oven until we noticed a strong burning odor and found that the microwave was still running some 20 minutes later and had turned the food into a black mass of burned food and the plastic cover was melted and burned.I contacted Whirlpool service thinking that the unit was under warranty from the previous service but they said the parts only carried a 90 day warranty and my only recourse was to pay for another service call and purchase another door panel for approximately $400 or I could buy an extended service contract for $300. Needless to say Im not about to spend that kind of money to, at best, get another year of service from this inferior product. This is simply not a safe product that could have started a deadly fire if I had not been present to stop it when I did. I have probably owned a dozen microwaves from other manufacturers and have never had any kind of problem including a comparable GE unit that has been flawless for over 15 years. I am extremely disappointed that Whirlpool has cheapened its product line to such an extent but I suppose I shouldnt be surprised since I noted this product was made in China.

Purchased an expensive, Cabriolet Washer in 2014 to replace a well used Kenmore washer. Sucked into the, Whirlpool is a good brand and spent more than I would have. Lid lock fault started about 3 months ago, googled fix and found this to be a very common problem with this brand. Have been able to override and reset it but it is very frustrating to deal with. Called in a repair person this morning who, for $140 told us we had a faulty lid lock and for $360 he would replace it. I contacted Whirlpool and asked if they were aware of this very common complaint (just google it) and they were not but offered to make a record of mine. Please do not buy Whirlpool. Very disappointed with their product and their response.

Whirlpool Cabrio Model Wtw8000BW - Purchased machine Jan. 2014. It does not wash my clothes clean. Clothes come out with dirty streaks all over them. The clothes I dry on a line smell dirty, like they werent rinsed properly. I have been cleaning the machine the first of every month per the instructions. I will never buy another HE washer again, this is my second one. Purchased a new one with an agitator.

The machine was great and handled large amounts of laundry. It was very expensive but my wife was happy with its performance. A year and a half into owning it, the electrical code F70 comes up and it stopped working. When I checked online, I found it is a common problem. I contacted whirlpool customer service and they could not do anything. Spoke to the manager, Kiesha and she refused to help me even though I bought both the washer and dryer for a lot of money. Customer service is not a priority evidently. She denies that there is an on-going problem when both the internet and my service tech say differently.

August 15, 2011 - We purchased a new Whirlpool Water Heater Model N50T61-403 for $398 from Lowes. We used their recommended installer (that was our first mistake!). He made the following installation mistakes: 1. He connected the hot water to the cold water & the cold water to the hot water. 2. He installed DRYER venting instead of HVAC venting. 3. He used flammable tape on the venting instead of screws. 4. He had incompatible metals touching near the gas line which can create an electrical charge & thus, a sparking situation. 5. He left us with a gas leak. 6. He did not install the screen that is supposed to surround the base of the water heater.7. He failed to strap down the expansion tank.These failures were discovered by an HVAC person who was in our basement to give an estimate on a replacement of the furnace & AC coil at the same time this genius was installing our water heater. The installer overheard the comments & literally... he disappeared & we never saw him again! We told all of this to Lowes & they were not phased in the least -- indeed, they didnt even seem surprised! They sent out a few other guys from the same company to correct the errors. So, it finally was installed & passed the county inspection & we had hot water again... for a little while. Within a few months the water heater pilot light would not stay lit. I was having to relight it once a week or so. After much arm twisting, we were finally able to get Whirlpool to send out a new pilot light assembly and pay for the installation. It was installed July 25, 2012. And.... it worked for 8 months. After returning from a trip on April 30, 2013, we went to take showers & the water was cold. The same problem was happening again... The pilot light had gone out while we were out of town & it will not stay lit & I have to relight it every 2-3 days.We talked to an assistant manager at the Lowes store where it was purchased. He talked to Whirlpool & Whirlpool said they would pay for the parts but not the service call which would be $149. I also learned today from the same manager that Whirlpool will not replace the product until they have replaced the same parts three times. Hmmmm.... Lets do some basic math here. $149 x 3 = $447! Thats MORE than the water heater cost! We believe that the water heater has been defective from day one & we also contend that their replacement part for the pilot light assembly is also defective (by design??). A pilot light assembly should last longer than 8 months!We are getting ready to build a new home within the next year. We will get to choose our supplier & the manufacturer of the appliances that will be in our home. Needless to say, Lowes will not be on the list. They keep saying, Our hands are tied. (Not buying it!) And Whirlpool will definitely be off of our list as their customer service is the worst Ive ever seen & their product quality is sub par. The other thing I experienced with Lowes was that when I tried to leave a review on their site for this specific product... twice... both reviews were rejected. The reviews presented the facts as Ive stated here, but because they showed Lowes & Whirlpool in a negative light, they were not posted on lowes.com. So, consumer beware -- their reviews are heavily screened so that the negative reviews rarely get posted. The consumer should be aware that the reviews on Lowes website are heavily screened & therefore do not equally represent consumers who have had a negative experience. This is an integrity issue.

We purchased this washer on 2008-04-27. It ran okay until a few months ago when it began making strange intermittent noises. This is now happening more and more often. I reviewed a lot of websites and see that this is a common occurrence for Whirlpool Cabrio washers, and Whirlpool will not stand behind it and make it right. Im going to write them a letter mirroring what Im saying here, and remind them that other appliances in my house are coming due for replacements or upgrades. Whirlpool and its affiliates will not be part of those upgrades going forward. I have no patience or tolerance for expensive **, which is what they put out here. I will have to purchase a replacement washer since this seems to have two major areas of failure, both extremely expensive to repair. I might check out Roper and see what they have--its apparently very well rated by the folks that work on these things.

Within a few months after I purchased my gas hotwater heater, I started having problems with it not wanting to stay lit. It was purchased in 2004. I see that this is an ongoing thing with Whirlpool. Every time I would call them, they would give me stupid answers on what it could be. One lady got hateful with me. I have replaced every part several times and Im having problems. About every two to three months, Im replacing thermal couple. As of right now, Ive been without hot water for eight days. I called and he told me about a trip button that is in the little white thing that has wires going to the thermal couple. I push in on it and then tried to start my heater and it worked. They have never offered to replace it or even give me a discount on a new one. No one should be having so much trouble out of your hotwater tank. This is not normal. These are defective and should be recalled. This company is ripping the consumers off and we need to stick together on this and do something about it. Im afraid to buy another heater because I can see that the new ones are still junk. What do you do?

Smelled strange odor in laundry room area.. Noticed plastic panel to Whirlpool electric water heater controls was melting and immediately closed breaker to the heater.. After inspection of heater control panel, noticed all wiring damaged and burnt causing burning smell.

Very concerned. First the microwave broke. It seems that is burning on the inside. The model number is MH1150XMS-2, purchased in 2005. I have had to replace the plate. I have read of many recalls, because of the potential of fire. My model was not among the ones on the recall list.

I bought my microwave on Dec. 8, 2010 and paid to have it installed. On June 29, 2011, the microwave quit heating anything up so I called Whirlpool. They sent a technician out and he repaired the magnetron. The tech said it was defective. I accepted that but then on Nov. 8, 2011, the microwave quit again, same problem. I called Whirlpool and told them I thought it was a lemon and wanted it replaced but they refused and said that they paid to have it fixed. They came out and fixed it. Same problem, the magnetron. Well, here we are another six months later, it has quit again. I have been on the phone with Whirlpool. I spoke to a lady named Barbara and she said even though its out of warranty, they would be willing to pay for the parts, not the labor. Of course, labor is more than the parts. So, I asked her whats going to happen another six months from here on. When it goes out again, she said that that was it. They werent paying for any more parts. I asked her for her supervisors number. She advised me to write a letter and someone would call me. Well, a lady named Donna did call and she told me the same thing. They would pay for parts but not labor and the offer was only good for 30 days. Also, I have the tech talk to their techs but she didnt have the number and maybe they could find the problem. Well, the problem is its defective. Thats all there is to it. We could fix it over and over again but its going to keep burning out. I told Donna surely I cant be the only one complaining about this microwave and her response was theres no recall on it. Something needs to happen. This cant be right. We spent hard-earned money on this product and shouldnt have such a problem every six months.

Bought brand new stove, had issues from day 1, called them after TWO different repair companies came looked at it and said it was a melon, Whirlpool wanted to send a third repair company. Started dealing with this in September, its now end of December and Im still waiting for replacement stove.

Cleans average compared to previous dishwashers. Does not dry well even on high heat dry. Cycle takes about two hours and I have to run it during the day because it is too loud. The price was good, but I wish I would have bought a little higher grade.

We purchased a Whirlpool AccuBake oven in 2005. I think we used the self-cleaning feature about 3 times. The reason I mention this is it may be a possible cause to the frightening experience we had on August 15, 2012. My wife was cooking on the stove top when suddenly we heard loud electrical explosions coming from the back of the oven. We soon saw long arcing bolts of sparks shooting out the back, and my wife was terrified and didnt know what to do. I told her and my son to stay away from it. I ran to the circuit breaker box and turned off the breaker. We then looked in the back of the oven and it was on fire. I ran around looking for a fire extinguisher but my son managed to put the fire out. We called Whirlpool up and explained what had happened. They immediately sent someone out to look at it.I was very impressed at how fast they got someone out there. Whirlpool sent two technicians to look at the damage. After they were done inspecting, they told my wife that the problem is loose connections on Whirlpools side and not the feed and it had a damaged control board and that this is the fault of Whirlpool. He was very polite to us and apologized for any inconvenience. After a week had passed, no one called us, so my wife called and talked to some woman representative at Whirlpool. She told my wife that the report she got said that the oven had loose connection on the feed side from where we bought the oven and we should deal with them. My wife couldnt believe her ears and said, No, thats not what the technician told us, and the woman continued to talk and my wife said, Wait, slow down. The woman replied, Oh, am I going too fast for you? Well, I guess I have to talk slower then, in a sarcastic tone. My wife then called the technician who wrote the report and explained what the representative had told her, and his reply was, I cant believe she said that. I am not happy about this, that is not what I wrote in my report. Dont worry, I will personally take care of this. Again, the technician was civil and polite. After two days passed, my wife talked to the same woman again but this time she changed her story. She never apologized and said, It looks like in this report that the connections were loose to the control board. Since the oven is 7 years old and accounting for depreciation, Whirlpool is offering to you a total of $59. My wife said, Really, $59? How long is the life expectancy of these ovens? She told her, 10 years. My wife said, 10 years? Well, ours only lasted 7 and you are giving us $59 after we were almost killed and my home could have burnt down to the ground? She said, That is our offer.I called Whirlpool back and asked to talk with the safety supervisor and it was a woman again. Was it the same woman? It could have been the same woman my wife talked to, I was not sure. I asked her, When is it appropriate to issue a recall on a product? Our oven was defective at purchase. She said, You are the only complaint we had on this oven, so no recall is necessary. Yes, I said, but since it has been proven this is the fault of Whirlpool, I would expect at least a working oven from Whirlpool. I also told her the technician told my wife that Whirlpool should be bending over backwards for you, and she said, I apologize for the technicians remarks. I told her that I was dissatisfied and she will be hearing from me in the future. I did some looking on the internet and I found that KitchenAid which is made from Whirlpool had issues with a particular oven which was found that when the self-cleaning feature was used, it would heat up the control board, and since most people dont use the self-cleaning feature that often, it would take a very long time to develop. I thought that loose connections and heat are a bad recipe for disaster, and that quality control negligence and inferior components are to blame. Considering the past history and track record of class action lawsuits and appliance malfunctions such as the control board on their dishwashers, I believe it is all connected and related to my problem. Sorry but $59 isnt going to buy me a decent toaster oven, let alone a real oven. That oven should have lasted over 10 years and considering the possible damage and deaths that could have occurred, you would think that it would be in Whirlpools best interest to address this problem and bend over backwards for anyone who had the misfortune of purchasing this mickey-moused nightmare of a disaster-waiting-to-happen problem. Its not so much the money. What if a small child touches an oven as it conducts 220 volts then shocks into a childs heart to ground? What a ticking time bomb this oven is. As far as I am concerned, I dont want a dangerous oven like this in my home and Whirlpool needs to take some lessons in public relations.

I purchased the Whirlpool Cabrio (wtw6600sw2) about five years ago. Last year, the motherboard had to be replaced. This year, it started to have load balance issues on the spin cycle; in other words, it wont spin without sounding like its going to tear itself apart. It cost $75 to have someone look at it, and to fix it will cost almost $400, and whats next? I spent a lot of money for this machine, and Whirlpools answer was to offer me a discount to purchase a new Whirlpool. I called Whirlpool and my model does not have a recall, but models with same problems have been recalled. I will never buy a Whirlpool again!!!

We have had this Cabrio washer/dryer pair for 8 years now. I didnt want to buy a front loader at the time since they were relatively new and was afraid to roll the dice. We saw the ads for this pair, the washer was the largest top loader at the time and didnt have the agitator (which I liked) so we bought them from Best Buy. I purchased the extended service plan (thank God) because we started having issues within the first month. First was the dryer, it was making a funny squeaking noise. We called to have it looked at and the tech said the drum was out of round. He ordered a new one and it showed up almost oblong. Returned it and got a second (same thing). We straightened it out and put it in. Two weeks later the control panel went out. Repaired it. Then the washer started. In the first 3 years of owning these we had called to repair the washer 4 times and the dryer 4 times. We could have got them replaced after the 5th call. Of course we had replaced all the faulty stuff and the pair settled down for 2 years.Now I have had to repair the washers control panel myself, the dryer sounds like it is coming apart and sometimes runs for hours, and now the washer cant wash in any cycle but delicate because the drum bangs around and cant self balance any more. What junk!!! I know people that have purchased low end machines and have had no issues for decades, maybe a random belt or something simple. I wouldnt buy another Whirlpool set if they were the last manufacturer on the planet. They should be ashamed that they didnt recall these things for all the problems they had.

The pilot light went out on our Whirlpool hot water heater. We followed instructions and were unable to relight. Our plumber was also unable to relight so we ordered new parts with associated overnight express costs. The plumber returned and worked for over an hour. When the pilot light came on the burner assembly burned out the new thermo coupling and that needed to be replaced again. This happened again. I would like to join the class action suit as Whirlpool has known about this problem and consumers are paying more than the original cost of the unit for repairs.

The beat goes on. My Cabrio washer is still down. After working for a mere 14 months, the control board died, and the machine would not spin out water. The repairman ordered a new one. Though the part arrived several days earlier than predicted, the repair service said they could not send anyone out, until our scheduled appointment. At last, today, the repairman arrived. I am ready to start whittling down the mountains of laundry we have stuffed in every closet. Some areas of my house are starting to smell like a locker room. It is not convenient for us to haul everything to a laundromat, or impose on a relative who lives nearby.The repairman was in the laundry room for at least 45 minutes, and then very apologetically tells us that the part is bad. It will not work at all. He has ordered a new one, and requested rush service, which I think they will ignore. I cant help but think these parts are manufactured somewhere outside the USA. Well, listen to this Whirlpool, I would rather pay $25 more for this part, and have your washing machine work. Dirty laundry might seem unimportant to you. It is not unimportant to us! If you cant do better than this, make something else. I am furious, and will spread this news to everyone I know, and I will report on this situation again.

Old stove does the job. I need a new and updated one. Need a warming drawer. Lower drawer does not close properly anymore. Paint on back panel is chipping. We are limited to range choices because of space.

Bought this 18 cu ft refrigerator this year. Only 3 choices for temp. Everything freezes, milk has crystals, ice cream is soft. Buyers remorse! Old ref was a Whirlpool. Wished I would have given others a chance.

These machines are designed to clean your clothes by rubbing them together which they attempt to do in a minute amount of water. They destroy the fabric, pull the seam out of shape, wrinkle them beyond the point of wearable, do not get them clean and do not get all the detergent out. I have had clothes come out partially dry. They also do not dilute the fabric softener, leaving unremovable stains on your clothes. In addition, they take forever to do a load of clothes even without the extra rinse you need if you want any hope of getting the clothes rinsed. The dryer is the slowest dryer I have ever had. The steam refresh that is supposed to get the hideous wrinkles out of your clothes does not put steam into the dryer. Instead, it sets the dryer to the highest heat so that those clothes you did not want on high heat are now getting it; then it shoots bursts, yes large bursts, of water on them. Your clothes come out a combination of still wrinkles and wet. If you hear of a class action suit, please contact me. These machines should be recalled.

I would like to know if anyone else is having trouble with the broiler unit. The unit quit working. Thankfully I had purchased the extended warranty. The guy came out, cleaned the orifice and called it good. The next day I went to use it, and guess what, it did not work!! So we thought maybe we needed to leave the oven door cracked open a bit... Well, guess what... It melted two of my knobs!! We called, got another guy out here. He checked everything. Even pulled the stove out to check out connections. Then he informs us that you can set the broiler to whatever temp you want. Thats new. So again, we try the broiler.... Guess what... It got to the temp and clicked off. Now I ask, how does one broil a steak if it does that? I did call Whirlpool directly and got nothing. Our model is WFG361LVQ2. So please, if anyone out there knows that this is how it is supposed to be... please let me know.

I bought a Whirlpool Duet Washer and Dryer in September 2013 and washer is already broken. It leaks out the front of the front loading door (yes, I clean it as advised, including leaving door open to air dry etc). I am a retired senior citizen and my wife and I spend 6 months of the year in Florida so the washer has barely been used since we are barely home and its not like we are trying to wash load after load of heavily soiled items daily. I would not recommend this product at all!! The repair people said it would cost approximately $300 to fix and offered a plan to fix it for $350 with a 1 year warranty. Why should I bother to do either if I will have to do same after 1 year? This machine is barely used and broke?! The customer service people were not helpful and seemed only interested selling me the repair plan to fix what should not need fixing. So, to recap - I bought the machine in 9/13 then went to Florida from 10/13 to 4/14 (so it was used 1 month). Then, it was used from 4/14 until 10/14 (6 months). I returned from Florida this year in April 2015 and it started leaking in June 2015 (2 months). So, my machine has been used for a grand total of 9 months and it is already broken!!! Stay far away. Whirlpool should come and replace this machine for us for free if they care anything about customer service and senior citizens but clearly they do not. In Florida we have an old Sears Kenmore machine that has lasted for over 20 years!!

I thank the folks at Whirlpool for building a washer (Cabrio tub bearing failure) that lasted 22 days just shy of four years, better than the Whirlpool Duet that lasted 14 months, tub bearing failure also. Now I have high confidence that Whirlpool pre-engineers failure into every washer they build.

After reading all the reviews about the Whirlpool Cabrio washing machine, all I can say its just a piece of junk. We have replaced the agitator 3 times at $80.00 each, not including labor. Our clothes are never cleaned properly and it always seems to be out of balance. I will never purchase another Whirlpool product.

I was going to write a negative review after our Whirlpool stove oven stopped working. We only had it for three years. Technician’s visit today was $70 for the information that we would be better off buying a new one because the motherboard is gone. However, after reading all the horror stories which are already here, I realize that we are relatively lucky - at least, our stove worked for 3 years... Still very disappointed and unhappy. No more Whirlpool products!

I purchased Whirlpool Washer WTW4815EW on December 29, 2015 for my tenants apartment and by October 7, 2016 it was not working. I called Whirlpool for service since the product is under warranty. The closest appointment was more than 2 weeks out. On the appointment date the technician called me and said he was on his way to my house which is more than 30 miles from my tenants apartment. The technician said he could not service the tenant area as that was a different group, so we rescheduled for a week later. A week later no one shows up, so I rescheduled yet again for November 3rd and drove myself to wait for the service person who was supposed to be there between 8 am to 12 PM. At 11:40 I saw there was a 10:36 am Whirlpool attempt to call me but no message was left. When I called back they told me the technician called in sick and they called at 7:30 (my iPhone indicated 10:36 am). Now they say someone will come on Saturday November 5th. It will be one month on November 8th with no working washer. While it is bad enough the washer stopped working in less than one year their service support is even worse than the product.

Purchased a GGE388LXS04 electric range in June of 2013 from Lowes. In September 2013 one of the top burners went out, under warranty Whirlpool repaired the burner. Now after attempting to use the self cleaning mode for the oven, the ovens (top and bottom) along with warmer device do not work at all. This issue is evidently a major issue with Whirlpools electric ovens. Will call Whirlpool tomorrow as the oven is still under warranty, will also call Lowes and see if they will replace the oven with an oven with a comparable brand. Wish I had read this site before we purchased this oven. A very bad experience.

First three months, the main water gasket broke. Thank you for lots of water all over the kitchen. I pulled the washer out to inspect the cause, wanted to see if it was house plumbing or dishwasher. The hose was hanging off the bottom of the machine. During the 45-minute call, I got in my car and drove to plumbing supply and applied a new hose clamp. The next day, a free service call, the repairman said it was the second one this week, Thats just what I would have done, but would not put the machine back. (void the warranty, finish work, etc...not sure how he would have serviced the machine if I did not pull it out for him). A few months later the wheels on the top shelves give way/fall off the rack, so we have those replaced. As soon as one is replaced, the other side falls off... Now, approximately 14 months into installation, the dishwasher does not work. The control panel is flashing and will not start. What a runaround with KitchenAid. We were told there was a recall on the hose clamp (we never got one). We cannot have the control panel worked on until the hose clamp is certified... That will take a week. Then we can call back... What a hassle. We bought this expensive product on good reviews. We are most disappointed. There is very little concern for making the product good. Its incredible that so much can go wrong in such a short time of limited use. Once/day... The hose clamp is just poor engineering. The rest is terrible quality and support

I bought a Cabrio top loader in 2007. Have now replaced a pump for the 2nd time. Replaced a circuit board once. Thank goodness the machine was purchased at a local appliance store who stand behind what they sell and are very prompt in their response time.

We purchased a Whirlpool Cabrio about 3 years ago. Have never really like it. It doesnt add enough water to the wash cycle unless you use the bulky setting, which fills the tub up the entire way, so wastes water. It would have been nice to choose your water level like you could on the old machines. Now it wont drain completely and wont spin totally. Ive tried using the drain/spin cycle 2-3 times extra and it still wont spin all the water out. Ive noticed that there is still water in the drum, you can hear it slosh when you move the drum, so I wonder - has anyone ever been told there is a filter in there somewhere that might be clogged keeping it from draining completely? My husband thinks that maybe all the water in the bottom of the drum is not letting it spin because its throwing it off balance. And yes, it stops before the cycle is complete and just sits there and blinks and you have to unplug it to clear the cycle. What a pain. We will never again buy a Whirlpool and I absolutely do not recommend Whirlpool washers. I have a Maytag as well and have not yet had problems with it. Bought it at the same time we bought the Cabrio (2 households). At least the water levels in the Maytag are a little more normal. You can wash more than 1 pair of jeans and get them clean in the Maytag. For those of you with the problem of the clothes not smelling clean - try running the clean cycle with a cup of bleach about once a week. No clothes in it - just a cup of bleach in the bleach dispenser and nothing else. Works for us.

Our range emits smoke and a toxic odor spontaneously when not in use. We feel it could be a potential fire hazard. We have had repair people and fire department out. We have contacted the manufacturer numerous times and they do not return our calls.

My old 25 yr old Whirlpool died and was shopping for a new one. I saw the Cabrio and was really impressed by the features and large capacity interior. I can say that I thought my clothes were getting clean until I looked closely. I have never been so disappointed with this washer. I wish I had my old one back! Clothes arent clean, they are so twisted when I take them out and theres a horrible smell, like oil burning when it runs. The machine would fill up and when it would start to wash, it wouldnt, it would stop. And a loud humming noise was coming from the back.I shut it off and turned it back on and it wouldnt clear. I had to unplug it and plug it back in to clear it and start over. The bearings are gone now and I was going to have a repairman come and look at it, but now I wont bother! After reading everyones comments this Cabrio is a piece of junk and Im sorry I ever bought it! So now Ill be shopping for a new one tomorrow with an agitator!!! Im not impressed with the HE appliances!!! Ive owned this POS for not quite 6 yrs. Expensive to purchase and I will not recommend Whirlpool to anyone! Its sad that companies today make cheap products!! Built to last... ha!! Well never see those again!!

My whirlpool Duet Washer has been repaired twice in three years for more than half the cost of the original product. Now it faces another repair--not worth it!Shouldnt a major appliance last longer than three years? Whirlpool will do absolutely nothing.

I purchased a Whirlpool cook ceramic cook top for our new kitchen. The very first time I made something (it was lentil soup) something stuck to the cook top. I have had a ceramic cook top before for 18 years - never had a problem until the whirlpool cook top. I cannot get it clean. I have tried everything! Such as stove top cleaner designed for whirlpool cook tops ($22), other cook top cleaners, the single edged razor, a scrubby sponge, steel wool, I even resorted to furniture stripper - NOTHING has removed this spot. I am ready to throw out this new stove top! What a huge disappointment this Whirlpool product is.

I purchase the front load, energy efficient brands, low water usage. Love Whirlpool; never had a problem with their appliances. Front load, low water usage, clothes dont sit and spin in dirty water. Dryer has multiple cycles. Perfect for the whole family. My last Whirlpool set last me over ten years, wanted that same quality level in my new purchase. I wanted a quality machine. I was very familiar with the Whirlpool brand and knew that was going to be my first choice in a brand. These were full size. The tub is large enough to hold a king size comforter and wash it without destroying it. The dryer has a separate attachment for pillows and shoes (sneaker plus) and was competitively priced at the time of purchase.

We purchased a brand new Cabrio Washer and Dryer in 2008 from Lowes. The salesman at the time suggested I purchase the extended warranty. It was because of the state of the art controls in the machines that could cost plenty if they had to be replaced. I was a bit skeptical at first. After several weeks, I returned to the store and purchased a 4-year extended warranty. This was probably the best money I expended in some time. In less than three years of ownership, I have had to use the warranty twice for the same faulty part (water control valve) that the repairperson told me was problematic. Then after reading the horror stories that consumers submitted to this website, I felt compelled to voice my opinion as well. I have been a die hard Whirpool product fan my entire life because they used to manufacture quality, long lasting products. I am moving soon. And I will have to purchase new appliances for the kitchen. But they will not be manufactured by any Whirlpool company. Shame on you Whirlpool!

I do not use my oven much, mostly to heat up something. I noticed all of sudden I couldnt get the microwave to work at the same time as the oven. Then the controls stopped beeping. Then I went to heat up the oven and it started smoking and had a terrible smell. I am two weeks out and still no microwave or oven. The repairman was very nice. Came out and ordered parts. I wanted a new oven and I was told no. Parts came in. Repairman came out and nothing worked. Waiting, waiting and waiting. I will never ever purchase a Whirlpool appliance again. This is not my first bad experience with them. I thought maybe they got better but that did not happen.