Model #wfw70hebw Duet washer. Lasted 18 months, replaced one sensor and then find out computer board is toast. Seems this was an issue as I was told there is a CORE deposit on the old board so it can be repaired and resold. WTF? New board (repaired) is almost $300. That is a bunch of bull.

Bought Cabrio 3 years ago, started getting ul code and f1 code. We leveled machine, but cycle kept getting stuck mid-cycle. Called repair guy, they say it is going to cost between 6 to 800.00 to fix???? Really. Its three bloody years old. Very disappointed. Do I now get it fixed or break down and buy another washer. I would not buy Whirlpool again. Very pissed.UPDATED ON 02/05/2015: We called an appliance repair company and initially paid $440.00. After installing a motherboard computer system, it still did not work. We were then told that the other part would be another $120.00. We were already soaked for $440.00 so we decided to pay. After that was repaired the washing machine was still stalling mid cycle. We were then told that it has something to do with the wiring and it would cost another $120.00-$140.00. Needless to say, we declined. Complained to whirlpool that machine was three years old. We are pissed and $570.00 out of pocket. Just bought a lg front loader and paid for a 5 year warranty!!

Whirlpool electric range with ceramic cooktop - I have a large black mark on one of the cooktop burners that appears to be beneath the surface of the cooktop. It’s almost within the finish of the burner and unable to be cleaned with cooktop cleaner. I have purchased an extended warranty and arranged for a service call. The repairman came out as scheduled, but informed me after making a phone call to who knows, because he did not tell us that the problem was cosmetic and could not be repaired under warranty. However, if we wanted a replacement cooktop, it would cost almost as much as a new stove. He also said that he had seen many of these ceramic burners with that problem and it was not unusual. All I really want is what is fair, a defect that is not my fault that needs to be replaced. The stove (Whirlpool electric range with ceramic cooktop) was purchased in 2004 and is kept very, very clean.

Avoid Whirlpool refrigerators and dishwashers. Fridge sounds like someone’s trying to get out. Repair person said it’s icemaker and typical. Dishwasher has little friction gaskets that keeps the door from falling open. They’ve been replaced twice and found one on floor today. Plastic end of slider for upper shelf keeps falling off repairman replaced it showed me how to put it back on. This falls off regularly. Range has coils underliner of oven. Takes forever to preheat and self cleaner cycle is a joke. Million dollar condo with upgraded crap appliances.

The Whirlpool Cabrio washing machine it’s the best washing machine I’ve owned. Water temperatures are right on, has an express wash 38 mins for lightly soiled clothes, plus the normal, delicate, heavy, bulky, 2nd rinse, if you need it. My wife loves it because it’s very Gentle on her personal items. Energy saver AND BEST OF ALL, IT REALLY CLEANS THE CLOTHES.

Model # WMH 1163XVQ-1 manufactured 2010 however I purchased and installed it in July 2011. Noticed a small crack at the base of the handle about a year later. Within the past couple of weeks cracks are appearing everywhere including around the handle, the entire exterior frame as well as interior frame of the door. Neither my wife nor I slam the door or mishandle it to cause this damage. Called Whirlpool this week. Bottom line is that it would cost nearly as much to get a new door as to buy another microwave. This is an over the stove model. My previous microwave was GE and lasted over 15 years. Wont buy Whirlpool again.

We bought Whirlpool Gold Series on July 6, 2014. Refrigerator, range, microwave & dishwasher. Our refrigerator - we have the repair company out almost every month cause the icemaker was constantly icing up and wasnt making the ice cubes single, would come out all attached to each other. So after arguing with Lowes and Whirlpool we were able to get a different refrigerator in February of 2015. Now in April 2015 we are having trouble with our microwave with the light flickering off and on when we open the door and sometimes it work and sometimes it doesnt. The repair company has been out 3 times for the same problem telling me that where the door closes are 2 latches that when not lined up cause this issue, so the repair company replaced the 2 latches and a month later it started happening again. So they came out and replaced the light socket. Now we will see how long that last.Now for the range which is the AquaLift Self-Cleaning which doesnt clean the oven at all. It was like I was back in the early 1950s, only worse. The baked on grease spots, you cannot get off at all. To me this is false advertising and the stores personnel lied to about all you have to do is pour 2 cups of water in the bottom of the oven, press the self-cleaning button and after 40 minutes of cleaning and letting the oven cool a bit you just have to wipe the oven down with a damp cloth and the oven is clean. Not so much!!!Wish I had all my old appliances back because they were made to work correctly. The new appliances suck for the amount of money you pay for them. So please beware and do research on the appliances you want to purchases otherwise you will get ripped off with no satisfaction for your hard earned money you spent on them. I have always had Whirlpool appliances and have loved them but these new ones we purchased are nothing but junk.

Three years ago I bought a Whirlpool 22 cf bottom freezer (GB2FHDXWB02) & within 2 weeks it developed its first problem. Ive had service men out 3 times (on an extended warranty) for ice buildup and leakage, presumably from the icemaker, and the problem hasnt been solved yet. I tried to open the freezer tonight and the handle pulled off in my hands, nearly sending me head over heels. This thing is a major lemon!!! Dont get me wrong: I love the design! It looks good, keeps everything at the right temps & the bottom freezer is a great idea. Id buy the same design again if I could guarantee no leakage and a handle that wont separate from the door. Now Im having problems getting the repair service to come out here again, despite the warranty. Meanwhile, the fridge is leaking onto the wood laminate floor causing damage. I just replaced an ancient dishwasher & my old Whirlpool glasstop stove after its oven failed. I cant afford a new fridge too.

Bought a Whirlpool refrigerator and now it is dead after only 3 years - the gas is gone. The Dealer at Budget Appliance Surrey told us it was not a good fridge to begin with (but sold it to us for $900.00) and that Whirlpool had made a lot of fridges cheaply to begin with... So it was not their (Budgets) fault. When I contacted Whirlpool they were really too big to listen to my complaint and even though I had the receipt, they did not care to hear my complaint either. Never buy a Whirlpool fridge.

Do not purchase (Whirlpool products). Discuss guarantees with salespeople when purchasing! They are total sham and in fact borderline fraud! Purchased $5,000 dollar KitchenAid fridge only to have it breakdown after only 8 months. What they dont tell you is instead of recalling a product they give their repair personnel whats called a notice which means they know there are issues with their products!After much discussion and trying to return the product to no avail, I was told very adamantly my fridge would need to break down another additional 2 times before my fridge would be replaced with a new fridge. Forget about the cost of your food inside the fridge, they dont care! Just beware that their warranties and parts and labour are a complete and utter joke! My advice after much research if you can afford it buy Miele or Subzero product. Its more expensive but a lot less headaches in the long run! Ive eaten the cost of my KitchenAid appliance and went with a Subzero fridge. Dont believe the higher pressure sales pitch from salesman. Youre best to call a repairman and ask what hes fixing more often than not and 9/10 times he will tell you Whirlpool product! Customer service is a complete circus and gong show. Youll get further ahead talking to a donkey!!! Buyer beware! Whirlpool Canada/USA is a joke!!! Dont say I didnt warn ya!!!

I had to re-arrange my kitchen and have my slider doors moved over a foot to accommodate this monstrosity. After about 2 years the icemaker and water dispenser died - had to shove a facecloth in it to keep it from making noise. The white color is very hard to keep clean. Overall, I would not recommend a Whirlpool brand refrigerator.

The plastic frames for the glass shelves are cracking at the corners and the only option Whirlpool has given me is to replace the shelves at about $150 each. Needless to say, the cracks started just after the 1-year warranty expired. If only one shelf was cracking, it could be my fault; but since all are cracking (some on the front, some on the back and some in multiple places), I believe this is a design flaw and should be covered by the manufacturer. When I call, I can only get through to someone to schedule maintenance or order parts. What can I do?

We purchased this washer (Whirlpool Cabrio) about two months ago and we have been extremely dissatisfied with its performance. Quite simply, it does not get clothes or anything else clean! I have tried every possible setting and still the dirt remains on anything that is even slightly soiled. So, I cant believe that things that dont look dirty are getting cleaned either. They probably arent even getting rinsed, even with the extra rinse option. It seems almost nobody likes this machine, so why is Whirlpool risking their formerly sterling company reputation by keeping it on the market? I would be happy if I could return it to the store for a refund, but that is not a possibility as far as I can tell. If you are considering buying this machine - dont!

Whirlpool Cabrio - This expensive machine should be called the Presidential. First it spins, spins, spins. It sprays tiny amounts of water, so little, that there is 2 inches or less. There isnt enough water to cover the clothes so no agitator to stir and mix them. There are ridges on the bottom of the tub called aggrivators to twist everything into pretzels. This twisting spreads the dirt around, but does NOT remove it, the utter lack of water giving it no where to go. I use a hose to add extra water, and I hand soap dirty spots. I stop the washer frequently to hand rub and slop the clothes around and un-twist them. Explain to me how running this machine 3 times plus adding water saves water and energy. I cant, in good conscience, sell this POS to someone else, and I cant afford something else. I sure miss my simple reliable old Maytag. I could say even more about this atrocity, but not now. I HATE THIS POS!

Thermocouple failure on a Whirlpool water heater - We are having trouble finding the part to replace it because the thermocouple is threaded left-handed, and Lowes does not seem to have any replacements in stock locally. Meanwhile my tenants are without hot water, and my repair bill is escalating due to labor.

I saved my money a long time to purchase a new refrigerator (Whirlpool Refrigerator Model ED2VHEXV001). I have very low income so this was not an easy task. April 2009, purchased from Lowes. Ive read similar complaints and also believe there is a defect in the plastic material as there are cracks everywhere on the interior. Shelves have cracked and the whole thing is of poor quality. Seems like Whirlpool should step up and do the right thing. This needs to be replaced.

Washer, barely 6 months old, purchased at Lowes. While my washer cleans and I am happy with it, my washer started making loud noises during the spin cycle. I called Lowes warranty service approx 9/26/13; tech scheduled for 10/8, over a week later. Diagnosis: stripped bearings; total bearings and all tub components must be replaced. Parts ordered to be delivered to my door. Cost of washer: approx $800. Cost of parts: over $1600. Washer cannot be replaced until they have attempted to fix it at least 3 times. Repairman returns on 10/18 to repair. Oops, large plastic tub component shipped broken from manufacturer. Reorder parts for repair on 10/29. Finally a repair BUT A&E left the large tub part saying they had no room to take the part. So now Lowes is trying to arrange to dispose of the huge part sitting in my home. I live in a condo so the part cannot be disposed of in our facility. This has been a nightmare to fix and while customer service was cordial, they were totally unable to provide what is considered excellent customer service. So whose fault is it? I have missed several hours of work to try to get this taken care of. I spent money visiting a laundromat for over a month. I am the customer and guess what that means? Nothing! Now my concern is getting that large part out of my home and whether to buy an extended warranty OR just throw it out if it breaks. Very dissatisfied customer! And no the warranty for this major part overhaul is not a year from installation..... my warranty still starts the day of purchase. Are you serious? My advice: ask your friends about their appliances & esp service if they received it.

Quiet running, does a great job cleaning and drying the dishes, experienced some cloudiness on the glassware but found that if I position them in the middle of the upper rack that issue was solved.

I have a 1 year old Whirlpool washing machine (Model: WFW94HEXSW Serial:C04151969). The grease from the drum is found to be the cause of clothes being ruined during the wash cycle. I waited over 3 months for a replacement. The drum arrived broken. I ordered again, and it was then said to be on back order. The water shut off developed a slow leak, causing the water to fill, and flow out the front door, causing carpet damage. We have been forced to throw away good clothes, and pay to have our clothes washed, at a not so local laundromat. We feel it would be more than reasonable to have our washer replaced, and professionally installed immediately.

Whirlpool sent out a repairman to fix my range. I had it for 3 years, and one day I was baking cookies in the lower range and boiling water for pasta on the top left burner. There was a very loud pop, a bright flash in the glass top where the back left burner is, then there was no power to the range or oven at all. No clock display, burners would not work, oven would not work, nothing. As if it were unplugged. Of course, my warranty was about to expire in approximately 6 days (go figure) so I called the customer service line for repair. After 2 hours of back and forth with 3 different people, I finally had a technician coming out 4 days later. He shows up, takes about 35 minutes to get the glass top off, then says to me that he needs to order a part for it. This will take a few days. Ugh. Fine. 3 days later, part comes in. Same guy comes back out, fixes it. Ok.Up and running fine for about a year and 2 months. Then... POP! It happens again. Same scenario, different menu. (I was cooking breakfast). Now, warranty has run out and I have a $1,300 piece of scrap metal sitting in my kitchen. Worthless. My old KitchenAid stove was great. Had that thing for 13 years. Never a problem outside of replacing a $68 heating element one time. I paid $450 for that range. Tossed it out for this bells and whistles newer stainless steel glass top range/double oven. Regretting that tremendously. Whirlpool will be on my do-not-buy list for any appliance from now on. Didn’t even last 5 years. Oh did I mention the service call cost me $85? Yeah... Garbage!

Horrible stove. Bought online. Get set up and its worst design ever. Have to lay down on floor to watch broiler. Cant even slide out. The stove top is difficult to clean. The cast iron grates are very heavy and have to move one side at a time. I Cant control low heat. Have to use back burner only. Then Crap builds up on back console. The oven grates are too wide apart, Have To supplement with racks from my other stove oven.

Water heater purchased in 2011 and is already broken. Called the hotline and they were rude. Told me I need a $199 part. I read all the reviews and it seems that Whirlpool has made a bad name for themselves with the water heaters. They were not willing to work with me.

I love my dishwasher, have had no problems and it does a great job. Stainless steel interior is a plus. Give it a try, you will be satisfied with the performance.

Both the washer and dryer make terrible screeching noise. The dryer only dries on time drying. The store I bought them from have been here over 7 times too fix them. They still are not fixed. Just a terrible experience with this set from day one, load one.

I purchased refrigerator in 2010 through Sears. The freezer door began collapsing (like the air was being sucked out) and Whirlpool sent a replacement. I should have known at that point - they had over 20 in stock instead of making it to order with a several week wait as the rep expected. I complained again (out of warranty for the refrigerator, but less than a year for the replacement door) and was given the too bad, so sad - next question routine. Now the freezer wont hold frozen food. If I turn up the dial, I end up with frozen lettuce, etc. So much for Whirlpool! Im not so much angry at this point as I am talky - at the grocery store to perfect strangers, at church, etc. Im disappointed that Consumers didnt respond - they still rate Whirlpool fairly high - makes me doubt Consumers, too.

The oven works well. My complaint is that the glass door is very difficult to clean. Some kind of liquid got in between the panels and I cannot clean the glass without removing the oven door. Im afraid to remove the door as I may not be able to get it back on the oven. I have dirty glass I cant clean and that makes me unhappy. Otherwise the oven works just fine.

Purchased our Whirlpool Gold Oven in October of 2013 from Best Buy. The oven works fine, but using the oven to make pizza on March 30th of 2014, a fire started in the drawer under the oven. The oven was set at 400 degrees. Several oven mitts were stacked in the drawer. There was no major damage done to the range, other than a bit of discoloration to the white trim, but we will never put anything in the drawer under the oven and would advise others to do the same.

Purchased Whirlpool Dishwasher 1 year ago. I use the Dishwasher once a week. When the Dishwasher was originally installed, immediately I noticed when dishes were placed the racks, there is an annoying squeaking sound. I am not exaggerating but the noise can be heard from my sidewalk outside! I called Whirlpool and a technician was sent to my residence. There is nothing wrong with your Dishwasher. I was told to Grease the racks. One year later I still have the same issue! I placed the phone near the Dishwasher to have the Customer Service Rep hear the Loud Squeaking and to no avail. I will never ever buy another product from Whirlpool. Now the latch will not close to the door! I rarely use this appliance, only placing dishes and utensils. No Pots and Pans!!!!! This is going to be another huge bill I will be responsible for paying and I dont feel it is of my own doing. It seems to be apparent that Whirlpool does not stand by their products!!!! I am sure they are aware of all these issues, customers are complaining and nothing seems to be done from reading some of these posts. I am wondering why they are still in business.

Our Whirlpool Dishwasher model WDT710PAYW is less than 2 years old and is rusting on the outside of the door where the steam vent is. Apparently the hole that was made in the door for the vent was not sealed, now the paint is blistering up due to the rust. Will not purchase another Whirlpool.

We purchased a new Whirlpool dishwasher in June of 2014. By February 2015 the racks were rusting. I called loses warranty and they referred me to Whirlpool since it was still under a year old and covered by the manufacturer warranty. They said no problem and would have new ones sent out. Three months later I still did not get them. I called them back and they said that they were not covering them due to rust being normal. This is the absolute worst customer service and it says a lot about how Whirlpool stands behind their products.

Love my new Whirlpool Refrigerator! Works well and no problems for the last year. Filters are pricey but found some at Lowe’s cheaper. Whirlpool stays in touch frequently emailing information about their products, some useful some not applicable. Would I buy this refrigerator again? Yes, I love the ice maker, it is quite large (enough to fill a small cooler), and the convenience of crushed or cubed ice is nice. Most people complain about the motors are loud yet we have not experienced that.

I have had this product now for 1.5 years and am very dissatisfied with it. Whirlpool calls their oven an Aqua Lift Self Clean, which is terribly misleading. There is nothing self-cleaning about it, except that the person who needs to clean it is me (myself)! I cannot use oven cleaners on it, because that will void my warranty, so the only way to clean it is to scrub, scrub, scrub, down on my hands and knees, which I havent had to do for many a year. My second issue is with the glass stovetop. I have had many glass tops before and have never, never had such trouble cleaning it. Every time I use the stovetop I need to scrub and polish vehemently to clean it. And thirdly, the dials fail very quickly, and to replace them costs me $50.00 a pop! In just 1.5 years two dials have failed. This is just unacceptable, and I say shame on Whirlpool, and shame on the company that sold it to me. I will never, ever purchase another Whirlpool appliance again.

We purchased our Whirlpool Refrigerator, oven, and microwave a little more than a year ago. Not a single negative event with any of these products and my wife and I wholeheartedly recommend Whirlpool for operation and last ability, unlike the products we replaced them with.

I had purchased a washing machine trough CSD canteen and go for AMC for five years on September 25, 2006. In September 2010, I lodged a complaint and the Engineer visited and asked for a replacement of the bottom cover. I said okay, but later on he told me that I have to replace the complete outer cover. I agreed and asked them to replace it. The cost is fixed for 2,500Rs. They replaced the cover but did not replace the bottom cover.I talked to the agency and they agreed to hold to 1,000Rs for the bottom cover and I paid to them 1,500Rs. Later they brought an old cover and I refused to replace that. They told that the bottom cover is not available. Then they never tried to replace the bottom cover. I arranged for the same from the local marketing for 600Rs and replaced it. I paid the service charge for the engineer.Later, I lodged a complaint that the machine was not drying the cloth. The engineer visited and told me that the belt will be replaced on payment. I agreed and he told me that I will visit the next day and replaced the belt. But he did not come until it was late.On September 18, 2011, with number DL0911018283, my machine was not switching on and I lodged a complaint to customer care. But no engineer visited me. Then I regularly complained but there was no response from the agency. On September 23, I talked to customer care, Mr. **, that I am going out of station and I lodged a complaint from the last five days that no engineer visited me. My AMC is expiring on September 25, 2011. I will come back on October and then send the engineer. On October 9, I reminded them that they refresh my complaint with number DL1011007031. The engineer visited and told me that the PCB of the machine is faulty and I have to pay 3,500Rs.I told him that I complained for this problem during the AMC period, hence they are supposed to repair my machine free of cost but he refused. I talked to customer care and tried to resolve the issue but I was not successful. Then I talked to Mr. **, the head of Customer care in Delhi, on October 12. He promised to resolve the issue but no engineer visited me and my machine is still defective. On October 13, I tried to contact Mr. ** several times but he or his PA is not picking up the phone. Now, how will I get to repair my machine?

Bought a Whirlpool Cabrio washer from Home Depot. It started making noises on the spin cycle 2 months after the purchase. A technician came out and concluded it was a clothes hanger behind the machine making the noise. False. Two days later I tried to wash a load. All the panel lights came on. And then the machine died. No power. The tech came out and tried to run tests but the machine would not respond correctly. Informed it has a bad control. The machine will malfunction even if a button is pressed too long. And then its repairman time again. This machine is poorly designed. No doubt whoever designed the digital control panel did not think about ease of use. The tech has to recalibrate the controls after every failure. Whirlpool and Maytag have put out a bad product and this will be my last.

My washer and dryer have been a great experience. Doing laundry has never been my favorite chore but these energy efficient and state of the art machines live up to their advertising. One of the best things I like about the washer is the ability to set the run time for a future time. I do wish the dryer had something similar.

I purchased this refrigerator, approximately 3 yrs. ago. Right away the top crisper broke. I have put up with this broken crisper only to have broken the PLASTIC lips that hold the crisper to the top shelf. Piece of junk. I looked to order a new crisper but way to expensive so I just suffered thru. I cant even use it anymore as I cannot open or close it without it falling onto the bottom crisper. Would like to throw the thing out, but cannot afford another one. IT WILL NOT BE A WHIRLPOOL!!!

I purchased a washer and dryer set, the Cabrio Platinum Series WTW8500BRO, about 3 years ago. I had a UL code come up a year ago and the machine was serviced and all was back to normal. Then only 9 months later it started acting up again. This time it sounds like an airplane taking off and there is a black spatter leaking from underneath, also the lid lock stopped engaging. I started to look up the error code for the lid lock and while reviewing that issue it was an easy fix, however, the noise and black spatter issue led me to tons of horrible reviews about this product. It is a bearing/tub/shaft issue that is going to cost me $500 to fix. First off I did not pay cash for this set, I rented it for 3 years and paid twice what it’s worth, around $4,000. Stupid on my part but I couldn’t afford it the other way. Weekly payments were easier. Now I am scared to fix this product because of all the reviews I’ve seen from other consumers. I haven’t had the other issues like dirty clothes, not enough water, high cycle times because they all start with a high number but after it configured the load the time shrinks, but this major issue about the bearings, they say I have to replace the entire tub assembly which is half the cost of the unit. So stupid and I cannot believe Whirlpool is getting away with this crap. Please please please inform me about any lawsuits. I will gladly participate in that. They should be held accountable for such a worthless piece of junk. Like I said I am now afraid to fix this machine because from what I’m reading, more than likely it will only last a short time.

Whirlpool cabrio washing machine is 3 years old and the bottom leaks heavy bearing oil everywhere. I now see it is a common complaint and the seal was incorrectly installed by the manufacturing plant. They should be forced to offer a recall and they should stand behind their product. I will never buy whirlpool again. I see thousands of complaints online.

The Gold Series Whirlpool dishwasher has some cool features for changing the configuration of the shelves, etc. After that its all downhill. Poor washing, worse drying. In the past 6 months Ive tried: less dishes, redistribute them differently every use, lower/raise upper shelf, use liquid detergent, powder packets, drying agent... nada. Absolutely NO remnant of food can be on the dishes. Of course I rinse everything well prior to loading washer; this one wants them CLEANED. I dont give a flying fig how loud a machine is as long as its doing its job. This one quietly does very little. AND the genius who designed that horrid cutlery basket needs a new job.The basket slides onto the inside of the door, making it difficult to reach into; it can sit on the outside of the lower tray but it falls off at the slightest disturbance. The baskets are narrow with hinged lids; the lids have small and medium slits so items are placed individually. If your cutlery is the right size! Ours is a little wide in the handle, they dont fit and must be placed into the opened, narrow baskets and butt up against each other. We are only 2 folks, I cook one meal a day and run the washer TWICE because bowls and pots take up the entire space, so I either wash the remainder by hand or keep the sink full of dirty pots and dishes. LOVELY. Bring back the old washer!!!

Mtf18 defective refrigerator - The unit is 2 yrs old and about 6 months prior to 2014 I could not keep ice in the refrigerators ice (freezer) and the appliance compressor ran 24 hrs. a day without recycling or stop. I did not purchase an extended warranty, after all, Maytag the dependable company. The lonely Maytag repairman. Right!! The unit cost $$700. and is now an anchor. You cannot repair the compressor, only replace it...

This piece of junk just broke down not even one year after the purchase. Every singe Whirlpool washing machine has broken one way or another. This one will set the wash time for 57 minutes, and exactly 24 minutes left in the cycler, you hear this big crash and then everything stops. Another dumb thing about this piece of crap is that when the problem happens, the POS keeps the lid locked so that you cant tell what the problem is. What morons would put a lock on the lid? Its not like someones going to take a jacuzzi bath!Restarted the POS again, and exactly 24 minutes left on the wash cycle, there was another crash. Both times, exactly 24 minutes. NEVER BUY FROM WHIRLPOOL!

In the past 8 years, I have had to replace 2 Whirlpool Calypso washing machines and 1 Cabrio washing machine. All 3 washing machines worked great for the first 2 years. I purchased the Whirlpool extended warranty on all 3 washers. The first Calypso had 12 repairs done on it. Finally A&E repair service deemed the washer not repairable. Whirlpool replaced the Calypso with a new Calypso. Based on the problems with the first one, I again, purchased the extended warranty. Again, after the manufacturers warranty expired, I again had issues. After numerous repairs, A&E deemed the washer unrepairable. I contacted Whirpool warranty service and was told that they would reimburse me 75% of the cost of their choice of a Whirlpool washer! Since I have had 10 hand surgeries, I need a washer that does not have an agitator (hence the original Calypso purchase). The model that Whirpool warranty deemed as a replacement had an agitator and was also a much lower energy efficiency rating. I found that the Cabrio was a comparable replacement model and finally Whirlpool agreed to replace the washer at 75%. I was angry that they didnt cover the total replacement, but felt at least I got a totally new problem-free washer. I again purchased the extended warranty. I got the Cabrio in March of 2008. In April of 2011, the washer started getting rust around the bleach dispenser and also I would get UL code (Uneven Load). A&E tech came out and replaced a bearing. He said that the rust was not covered under the warranty. I asked how it was okay to have rust around the bleach dispenser if the washing machine is always wet with water. A month later, I was still having a UL code and the rust was getting worse. A&E came out again and said that even though I saw rust around the bleach dispenser, the rust was in fact underneath the tub and had eaten away at the parts. He called the warranty company to authorize repairs and the Whirlpool warranty company denied any more repairs on the washing machine.

We purchased our washer approximately six months ago. It is an energy-efficient top loader without a central agitator. If I wanted a washer just for lingerie then I would be satisfied. But I need a washer that will clean farm clothes. My husband works hard and his clothes show it. This washer does not clean them. I even tried putting very few items in at a time. They still arent clean. I have to take my heavily soiled laundry to the laundromat. My other main complaint is the baffling feature of a lock mode. I spend countless minutes standing by my washer waiting for it to unlock so I can toss in an extra item or add fabric softener, etc. When we removed the latch, the washer didnt work at all. Replaced the item at a cost of $40. Infuriating!

Purchased new from Best Buy for over $1000. One or two months after the warranty expired the ice through the door malfunctioned, would only spit out crushed all over the floor then clog up. Didnt bother to repair it, just open the freezer. Next, the door would not seal right and frost builds up in my frost free. Also, the ice delivery wont close tight. Now the unit is about 3 years old and I just finished paying it off and all the door shelves are cracking. Contacted Whirlpool and was told by email politely, Too bad. You are out of warranty, but please buy parts from us and say nice things about Whirlpool because we so value our customers. Never will buy Whirlpool again and recommend you DONT.

I was searching online and stumbled across this site. Funny that there were so many complaints about the console on the ovens, considering that my issue was with the console on a dryer I purchased. I have only had the dryer a year, and it stopped working. There is nothing else wrong with it, no codes, no problems with the lights, or anything else. A technician came out and found that it was a small plastic and metal button piece that helps the press here: spot on the dryer panel to connect to the start button on the console. The little arm had broken and the switch no longer worked.Figured we would have to purchase a new button. NOPE, apparently we were told that we had to purchase a new console (over $200 dollars, close to $300 with shipping)???!!! We were also told that wear and tear can cause the issue. Wear and tear?? On a dryer thats maybe run once a week for about a year? Try again, I think I need my boots because it sounds like horse** to me. I think I will pass this information along to people I know that are technicians so that they can let people know not to purchase from this company because they obviously arent going to address the situation. I think I might also utilize social media to let people know so that they dont have to go through this much aggravation. I certainly dont know what we are going to do, since it took me a year to pay that dryer off, I cant afford another dryer at this time. So unfortunately with a new baby on the way, you wont get any sympathy from me if your company takes a character hit.

I purchased a Whirlpool over the range microwave (model #YWMH31017AS-1) in April 2013, and had it installed in August of same year. It worked fine up until November 2014 - just over one year later. Everything on it works, except for the most important feature - IT DOESNT HEAT ANYTHING UP. Doesnt matter how long you set the timer for - the contents come out stone cold! I called Whirlpools 1-800 number and was told that because I did not purchase the extended warranty, I was responsible for all parts and labor costs. I find this completely unacceptable! I have had cheap $70 microwaves that have lasted 15-20 years. I will never buy another Whirlpool product, and am telling everyone I know to do the same!

I have 2 rent houses. I purchased 2 Whirlpool gas water heaters with a 6 year warranty, from Lowes in 2010 and 2011. The warranty just expired on 1 and almost expired on the other. I read the reviews and decided I would not spend my time to get a part, I did not want to put any more money into a bad product. Both water heaters leaked at the Honeywell gas control valve without any warning and flooded both properties. I replaced these with Rheem gas water heaters from Home Depot.

I bought a brand new Whirlpool fridge early June with the extended warranty to have it shipped on my moving day on June 18. The team delivered and installed the fridge and told me to wait 3 hours before plugging it. I went and spent over 300$ in groceries only to find out the fridge does not work. I waited 24 hours, still not working. I had to wait until Monday to call the customer service because it is closed on weekends. I had to throw out all my food and order food all weekend which incurred an extra 200$. I called Whirlpool on Monday and was told a technician would only come on June 30th. 8 DAYS LATER!!!!I did some research and found a certified whirlpool technician myself who was able to come the next day only to find out the fridge has no gas and this is an assembly defect - WHIRLPOOLS FAULT. Whirlpool would have to send me a brand new fridge (These fridges are NOT TESTED?!). I was asked to call to arrange the exchange, I asked for compensation as I have already spent over 500$ and now would have to wait another week with no fridge and they refused to compensate....They told me I would get a call in the next 48 hours to let me know when I would get the new fridge and 3rd day later, still no call.I received a call on Friday to tell me they approved the exchange...Really now and would have to wait another week. That is over 2 weeks with no fridge, I sent a private message last week to Whirlpool, no answer, I spoke to customer service twice, they cant help me and do not want to compensate me. I have never been so frustrated and mistreated by a supposedly « reputable » company? WORST PRODUCT AND CUSTOMER SERVICE!!! DO NOT BUY!!!!

From day one I was not happy with the new auto fill washer, I was told I just needed to get used to it! Well I have tried every cycle available and no matter what I try cloths don’t come out clean, using the deepwash cycle Sheets on top were still dry once cycle was completed!! Give me back my old washer! Washed much much better.

We have been married 36 years. Since year one, me and my wife have owned nothing but Whirlpool appliances. They lasted forever. Approximately 4 years ago, we redid our home, and bought all new appliances, stove, refrigerator, dishwasher, microwave, front loader, washer, and dryer, Since then, 4 years ago, our refrigerator ice maker stopped working. 2 years ago, our dishwasher wont heat up, so it is useless to us, and the bearings in the washer are shot. I must say we are so disappointed in Whirlpool. We are barely living on my husbands income as I had to stop working 3 years ago, as I became disabled, but did not make enough money to be able to collect disability. We cannot afford new appliances, nor to fix them. I am sending you the model numbers of each appliance, hoping you will do something to help. This is just ridiculous. It is just my husband and me in the house (washer: WFW9200SQ02; refrigerator: GD5NVAXSA01; dishwasher: no model number, but it is Energy Star II 8575637). Please help. We cannot afford to replace this, nor repair. It is hard for me to go to the laundromat, then come home to dry. Standing long periods to to dishes, takes a toll on me. Please help.

We purchased a Whirlpool gas range at Home Depot. After less than 2 years the oven would cut off and the time would start flashing. Check on other peoples problems and found out that I was not the only one. Called Whirlpool and the man on the phone told me I could have a problem with the circuit board. Said he could sell me a 1-year warranty to cover service and parts. I think the best thing to do is to buy another oven and not spend any more money on this junk. Never again will I buy Whirlpool or buy appliances from Home Depot

It never seems to clean the dishes and it runs for 3 1/2 hrs. It is suppose to have all these Features but does a very bad cleaning job. I have used liquid soap, the cascade pods and the jet dry, still gives very poor results. Use to have a Kitchenaid that lasted almost 30 years - great appliance...

Mold in my dishwasher right after having washed the dishes!! This is the first time I have seen the mold on the racks (lots of it!). However, my neighbor also has a Whirlpool and complains of the mold all the time. Also, my dishes often do not come clean. I would not have purchased a Whirlpool, but it came with the house, three years ago. Therefore, I do not have a receipt for it.

You have to take into account that this microwave doesn’t heat up as others I’ve had so even if the instructions call for something to be cooked for 5 minutes, you have to add at least 2 minutes more. If not it would be undercooked.

I purchased a stainless steel side by side refrigerator and unbelievably the doorshelves came crashing down - they just cracked in the middle. How cheap can stuff be made, those fridges are not cheap. I thought Whirlpool was a good product - I guess not.

Our first Whirlpool washer barely lasted 1 1/2 years. They replaced it with another one that broke within 9 months. When it worked, it was great... When it didnt, it either overflowed or did not wring clothes tightly on the second rinse.

I have been buying Whirlpool appliances most of my married life. Our most recent washing purchase is the worst machine I ever owned. I have ruined more clothes, rugs, sheets and towels, etc. than I ever have in my 45 years of doing my own laundry. In fact, I do not EVER remember a washing machine destroying any of my articles. I just pulled 2 almost new rugs out of the washer only to find they have been destroyed! I am pretty sure it is the extremely fast spin cycle that is destroying my items. I know it cant be the agitator because it doesnt move fast enough to even clean the clothes. And the stupid load sensor is absolutely worthless! It does not dispense enough water to even cover the clothes let alone clean them. Go back to the old machines that did their job without destroying anything and actually cleaned the clothes with an amount of water that I chose. I ABSOLUTELY HATE this machine.

I really like my new 5 burner gas double oven gas range made by Whirlpool. Except for 1 minor flaw where the backsplash panel warped at the beginning and was promptly replaced by whirlpool I have had no problems with my range, love having 5 burners and a double oven. Plus the left front burner has a much bigger burner with higher btu which helps water come to a boil way faster than any other ranger I have ever had. That is a real nice feature and I really like having 2 ovens, When cooking on an average day for my small family there is no need to heat up the big oven and the little oven is just the perfect size to bake 1 or 2 dishes. And on holidays when I am cooking for more people or many more dishes I have the capacity to cook more items.

We bought a Whirlpool refrigerator in January at Home Depot. In July we started noticing that the freezer doesnt work. The ice maker doesnt work, everything melt away. Frozen items were lost. We constantly have to dry the floor since it is leaking water. We called whirlpool on July 27 and they send someone to check it out the following day. He reported that we need a new freezer door. I call for a follow up, I was told that it will take 6-8 weeks before we get a new door and part for the ice maker. We recently called to follow up on the status of the door just to find out that the order didnt get process until mid August. In the meanwhile, the fridge is having condensation. Water is everywhere inside. Fruits are being rotten because of too much moisture. We called again and they send out the same technician. The technician reported that the fridge will not work properly until freezer is fix. We call whirlpool again just for them to tell us to wait for the part, and gave us an extra 6 month warranty.

This washing machine was already in the house when we purchased the house two years ago. In those two years, it has performed well for the most part. It has many different cleaning options, the clothes come out clean, it saves on the amount of water it uses, it’s quiet and I like the fact that it is a front loading washer.

I paid about $400 for this dishwasher and the regular price was over $600. Got a good deal. It washed dishes wonderfully. All I had to do was scrape the chunks off. It cleaned the rest. BUT... at a certain point, it started NOT cleaning. It was only about 6-7 months old. It was to the point where everything just came out kind of slimy and food grit was re-deposited on the dishes. I cleaned both filters. I made sure there was enough Rinse-Aid all the time. I ran hot water in the sink before starting to make sure the temp was hot enough. My husband went online and someone had instructions about cleaning the water intake because it could sometimes have sediment buildup. Not a difficult process, but there was no gunk in the intake filter. When I listened to a load it seemed like it drained, (most start with that), paused, rinsed for a couple minutes, paused, drained, paused and refilled for the wash cycle. So the pump worked, the arms went round and sprayed. Nothing was in the way of the arms. After it started the wash cycle, it seemed to just stall. It would spray for about a minute and then stop. Im not sure it sprayed after that. The timer kept counting down. It said dishes were clean, but it was an absolute waste of time. I was ready to go buy a cheap dishwasher and throw this one in the dumpster. I think it is a 720 padm??Just after my husband checked the water intake filter, we started another cycle. When it was rinsing, he opened it up and everything seemed to be working ok. It drained, then filled and started the washing cycle and then stopped. He opened it back up and surprise, the water was full on the front level by the float (that turns the water filling off). But in the back of the dishwasher, there was only about an 8th of an inch of water. Online it said the water should fill to just about the top of the heating element. It WASNT. Problem? It wasnt LEVEL. The instructions when installing said it should be leveled. We did when installing it (when it worked great). But looking back, we put in a new hardwood floor about the time it stopped working ok and we didnt put 2 and 2 together. We did not re-level. When we pushed the dishwasher back into its built in cabinet, it must have gotten OUT of level.The rinse part worked I guess. Then it drained and re-filled. After re-leveling the dishwasher, we opened the door at that point. The water was a level depth front to back and side to side. My husband explained what he thought had been the problem to me. When the wash cycle starts it fills, the float shuts off the water at the appropriate level. THEN... the dishwasher starts to pump and fill the arms and the tube up the back that feeds the upper washing arm. So much water goes into the arms and up that tube, the dishwasher looked almost empty of water again. As the dishwasher was now level, it began adding water to compensate for the arm/tube filling. Before the float would shut off too soon because the front part of the tub was full but the back wasnt. Without enough water, the dishes were NEVER going to/COULDNT get clean.The re-leveling made sure that the float didnt turn off the water filling until there was much more water, the CORRECT amount. The next load cycled all the way through, spraying much more than Id heard before and the dishes were clean. P.S. I also got some dishwasher cleaner and used that on a couple empty cycles. I NOW LOVE this dishwasher again. FYI If my husband wasnt handy Id have junked this thing. We HAD leveled the dishwasher when we installed it. Just didnt realize it COULD get un-level just pulling it in and out of the cabinet to install new floors. Check out all the troubleshooting stuff in the manual. But if it doesnt help, put a level inside across the bottom rack, front to back and side to side and make sure the bubble is in the middle of the two lines.The previous dishwasher I had, just made like a fountain of water that went up the middle of the dishwasher into a sort of funnel filling the upper arm. THIS one has that tube up the back and it curls down under the filter and Im guessing it is more sensitive to being OFF LEVEL, because the tube doesnt go straight down, it curls and lays across the bottom of the tub. Without being level, there was never enough water to suck up that tube to start the the actual wash cycle and it just stalled there till the timer said clean at the end. IE: dishes never did wash. BUT IT DOES NOW! Woohooooo!

In remodeling a house, we got all Whirlpool appliances for the kitchen, right when the lockdown started our freezer went out, 8 visits later from a local repair person, Whirpool will not honor the warranty and get us a new fridge!!! They just want the repair guy to keep replacing all the parts he has already replaced, the repair guy is beyond frustrated with Whirlpool and their crap!!! Never again, totally lost a customer here.

We purchased a new Whirlpool washer in March 2010. Yesterday, 2/19/12, the washer stopped working. We called a repairman who checked the machine and told us the motor needs to be replaced. We called Whirlpool today, 2/20/12, and were told by their customer service department that since we did not have an extended warranty. We told them that we believe the motor should last more than 2 years. Their response was that if the motor lasted more than a year that was all they cared about. The only thing they would do is replace the motor if we gave them $299.00. I think it is very clear that Whirlpool knows it makes inferior products as they fail to stand behind what they make. I will never buy another Whirlpool product and would advise anyone who is looking for a washer to buy something other than Whirlpool.

This is our 2nd circuit board failure in the 4-5 yrs, since we purchased this very expensive range/oven. The first time was shortly after the warranty ran out and Whirlpool would not even send us the part for free. They said there was nothing they could do. So this time we are not even contacting them and are just having our repairman order another new one. For a $1600 range to have to put more than $400 back in so far, I would never buy a Whirlpool again. I have been very careful not to use any cleaners on the circuit board as I was told by our repairman that that shorts them out. First the convect bake button wouldnt work, nor the convect roast, now the bake button, so the only buttons that work are broil and warm. Even the timer is shot. What a piece of junk (electronically). Beware buyers!

We have a Whirlpool range that was produced for Kenmore (Sears brand). It’s a glass top with electronic controls. Over the 13 years we have had this range we’ve had to replace the controls 3 times at a cost of over $300 each time. Each time we were under severe lightning storms and got hit with a surge. It would burn out the Control board. We finally got a whole house surge suppressor since a large device is required for 240 volt appliances. Also the glass top has gotten scored over the years. We would not recommend this oven and will likely replace it with an industrial gas stove with manual controls when this one dies or gets too expensive to repair.

I bought a whirlpool washer from Whirlpool on February 27, 2011. Since then, they have come out and repaired the washer for 5 times. They have even taken the whole motor out, and replaced it. The last time they came, they said I would have to pay for the next time. Now, it has broken again, and I have to pay for a washer repair that is less than a year old. We bought the Whirlpool washer at Sears, and neither Sears, nor Whirlpool will stick by their product. We cannot afford another new washer, and to pay for repairs is a stretch too. Is there anything you can do?

WRF993FIFM00 - HORRIBLE. I could not believe the reviews for this fridge... so I went ahead and bought it - WHAT A MISTAKE - service guy is at my house right now - fourth time in three months... fridge froze up and all my food has gone bad.

When I moved into my current home, this dishwasher(Whirlpool Quiet Partner 1) was already installed. It had never been used until I moved in. After two years of 2-3 times a week use, I have major problems. It will not complete a wash cycle, regardless of what settings I use. It runs long enough for the soap dispenser to release the Finish tablets which dissolve, but then the dishwasher stops running. The dishes are not clean, and neither is the interior of the dishwasher. It also appears to be leaking when it runs. I cannot afford to replace it, so either I will repair it myself or use it to store pots and pans.This is not my first disappointment with a Whirlpool product. A Kenmore refrigerator made by Whirlpool lasted 7 years before the compressor failed. Apparently, the self-cleaning coils werent and caused the compressor to fail. The refrigerator I have where I now live is a Whirlpool over 20 years old and runs perfectly. Apparently Whirlpool quality has deteriorated badly in the last two decades. I will never buy another Whirlpool kitchen appliance because of the dishwasher and new refrigerator experiences. When I searched the Internet for fixes for both appliances, I found many other owners having the same problems I have had.

3 months after I got the fridge, the ice maker went out. 3 months later it started to work again. Replace the water filters 2 times per yr. It is noisy when it makes ice.

I purchased this range 7 2013. I was a snowbird at the time so after November I went south. Upon returning my top oven when lit had a gas smell. It took three weeks to get someone out and was told it was the igniter and would cost 350.00 to fix. I then called dte gas for them come out as I have full house warranty. Since then five calls a new igniter and a new board just put in two weeks ago the board doesnt work. This unit has been discontinued. I would like to know why. And if there is a class action suit against. Whirlpool. Co.

I placed a service call for a high pitch sound that emanates from our new Whirlpool refrigerator MD#WRF990SALM00. It is hardly perceptible although hurts my wife and Is ears. The technician was courteous and efficient although said that the sound was typical of this model. He did find another issue with condensation forming at the top and returned with the repair part in a timely manner. I placed another call to Whirlpool whom suggested that I order a different authorized service company to investigate although if the results of the call was that it is a typical sound of this model that there would be a service call charge. I will most likely order this service call in the future although I will wait to see if there are any similar issues that arise. If you experience the same problem with your Whirlpool Appliance please leave your experience. Thank you.

We purchased our brand new home ten years ago and we were thrilled it had a double wall oven unit that I had always dreamed of owning. Well, the first time I used the self-cleaning mode that dream became a nightmare! The oven was in cleaning mode and I was so happy as I had never had a self-cleaner before! When the cleaning was done, the door remained locked and the control panel was not working. After making sure it was cooled the next day, I called for warranty repair. They came out and fixed it and apologized for the inconvenience. I was thinking it was just a glitch and went on with life. Due to my husband’s business, we only live in the house part time as we do extensive traveling. My children are grown, so my cooking is mainly holidays and birthdays when we all get together. Since it is used so seldom, the need to clean is not as often as others might be. The next two times I cleaned it the same thing happened. The third time they came out they informed me that it was getting too hot in the cleaning mode and the steam was going into the computer panel and melting the electrical wire. They also said I would no longer be under warranty and from now on it would be my issue. The next two times I cleaned the oven, I did so the old fashioned way and skipped the self-cleaning. This week my oven started beeping and giving me a code and will not work. I called my trusted repair man and this is what I learned. The computer board is probably toasted. They no longer make the board, so he will have to send it out to be rebuilt. This will take 10 to 14 days and the cost will be somewhere in the neighborhood of $650.00! Are you kidding me?! How is this my issue? I have checked faithfully every few months, assuming that others are having the same issues, and that Whirlpool would be doing the right thing and recalling these ovens. Stupid me! This last time I had not even used the oven in three days and it still went out? I am old enough to remember when the first place you went to look for appliances was Whirlpool because they were good, they lasted and the company stood behind them. Oh, how the mighty have fallen. From now on they will be the last place I look! I’m not sure what is going to happen, but I can assure you I am not spending $650 to repair this piece of crap!

Whirlpool ADP100 wh. A few programs, washes well, dries ok, not great but ok. Standard free standing size, 60 x 85 x 59 cm. The washer itself is fine, but oh the cheap moulded plastic parts, utensil basket, water arms etc, so poorly made. Its amazing that a company would use such poor quality and design to save what can be a few cents on the overall product, personally I was disgusted at the cheap crappy plastic bits.

I purchased a Whirlpool Ref side by side 11-2013. I have had nothing but trouble. First the Ice maker leaked, was fixed. The door to the ref has had serviced 5 times. The tech after many times trying to fix hinge on door twice was told to order new door. This took 6-8 week to get. Came today 5-27-15 too but new door on. It is still not right, has big gap in the middle - still not level as should be. I have called Customer Service again today with no help. All they want you to do is spend more money on a contract. I THOUGHT WHIRLPOOL WAS SUPPOSED TO BE A GOOD PRODUCT......NOTTA....WILL NEVER BUY THIS PRODUCT AGAIN. SO IF YOU EVER BUY WHIRLPOOL PRODUCT BE SURE TO GET EXTENDED WARRANTY. YOU MIGHT NEED IT..........STILL NOT SATISFIED AND NO HELP IN SIGHT.

I bought an American US Craftmaster water heater in October 2006. I have paid a plumber 3 different times to work on this and the pilot light will not stay lite. I used the replacement parts they sent, followed their technicians directions over the phone, etc. Nothing seems to work. Christmas was not pleasant at my house this year. I’m still taking cold showers.

I purchased the hot water tank from Lowes 3 years for over $500.00 within the first year, I experienced issues. I have the same pilot light problems as everybody else. I have hired a plumber four or 5 times to clean and blow everything out as instructed by Whirlpool. The hot water heater will not stay lit. The plumber has replaced every part possible two times. Customer service continues to inform me to do this and that and everything has already been done. I am without hot water again with children in the house. Once again, we are boiling hot water so that we can bathe--total inconvenience. This product is defective, and has cost me money to hire a plumber each time. I would never recommend this product to anyone!

Machine just will not clean clothes. Model Cabrio W10560169A. Company offered NO support. This washer retails for around $1,000 and just does not work!

We bought this washer on 9/05/09. Recently, it sprung a leak due to a worn out seal that the repairman said would cost more to fix than just getting another washer. You would think this might be cause for distress, but I literally jumped in the air and clicked my heels with joy! This washer has been nothing but a pain. First of all, I have to pre-soak every load before washing or the clothes come out just as dirty as they went in. I would set the timer on my stove to let me know when the 40 min soak cycle ended so I could change it to wash. Then I reset the timer for another 40 minutes. I also learned the hard way, that using any kind of heavy duty setting would turn towels into a pile of yarn. This washer cost $998, and guilt is the only reason I didnt replace it years ago. Ding Dong the washer is DEAD!!!

Purchased washer 8/2015. Washer quit working 12/2015. Would not drain or do anything. Repairman dispatched and came 3 business days later. (They dont work weekends.) Repairman looked at old receptacle cover and immediately stated, Problem with polarity of plug. No prior problems with plug running appliances. Plugged into it for over 8 years. When I advised him of that then he started troubleshooting circuit board. He cleaned out the machine and got it to work. (Still under warranty) 4 days from repair, and machine quits. Same problem. Wont drain and wont do anything. Call for service again on Weds. morning and given following Tues for service call. Online consumer reports complaints #ered at over 1,7000. Same machine, same problems. Call Whirlpool directly, given runaround. Talk to Whirlpool mgr. (Robert) complaint # **. He states, Have to wait for service. But calls Brandt Melb., FL to try to get sooner service. Brandt calls me stating they have ordered a lid lock and CCU board for machine and will be out Monday. How would they know to order these parts if it is not a constant issue? Im thinking class action suit for shoddy product... LOWES Indian Harbour Beach, FL. Transaction #**.

I bought a Whirlpool wdf760sadmo. It was Oct 2014. It broke 31 days later. Lowes said they would not take it back. Called Whirlpool, they sent a repairman out a week later. They ordered parts and came back two weeks later. The parts were not the correct ones. Ordered more parts. This time back in a week. Ok about three weeks have gone by with a broken dishwasher sitting at my house. Got it fixed. A month later a different problem. Call Whirlpool, wait, on hold for about 20 or 30 minutes. They sent a repairman out who ordered more parts which will be in in two weeks. Meanwhile I am without a dishwasher again. I have had to take a day off work each time they have came to repair it. I have spent way too much time on this thing. I wont be buying another Whirlpool.

Whirlpool Cabrio Washer WTW6200VWO & Cabrio Dryer WED6200SW1 - My Cabrio washer ties clothes in knots but the big issue is that if it goes to UL (uneven load). There is no alarm. Washer stops all operations except one. It fills up over the top, all over the rec room, out the door and down the street until someone alerts me! I run down, hit cancel and it drains. I unknot the clothes and start over. Then I mop up! Help! My Cabrio dryer has been through four door latches and I finally realize that the issue is that the latch and the protruding part do not line up evenly. This breaks the latches. Help!

I have hated this Cabrio washer and dryer set since the day they were delivered brand new by Best Buy a couple of years ago. The washer does not clean well, often does not spin dry, and leaves some clothes dry after a full wash cycle!!! I have to wash small loads on the deep water cycle to even have a chance at cleaning the clothes. The clothes are so dreadfully compacted and tangled that it takes great effort to birth them out of the washer, unfurl them, shake them, and put them into the next torture machine- the dryer. It is as if Whirlpool intended to build a machine to twist clothing so tight that it requires a bodybuilder to untangle the clothing. Then the items are so incredibly crumpled that ironing has found its way back into my already busy life. Ironing is a massive challenge to the degree of wrinkles in the clothing. The slanted tops are icing on the cake. Cant even pull the clothes out of the dryer to the top of it because they slide right off. Cool.

We bought a complete set of Whirlpool Appliances three years ago. The set we bought were in the upper price range. In the past three years: The freezer began forming ice on the bottom which melted and poured water all over the floor (a unit on the freezer had to be replaced 18 months ago). An element on the stove quit working and had to be replaced (12 months ago). The ice maker quit working and had to be completely replaced (9 months ago). The dishwasher quit working and the entire motor had to be replaced (3 months ago). The ice maker quit working again four days ago. The repair person who just came said the entire unit needed to be replaced, AGAIN. He said the warranty on the part is only 6 months. I called Whirlpool itself - their warranty is only 1 year. The fact that their warranties are so short, and there are so many problems with their products is evidence that they do not make products to actually work. They simply make them to sell. They do not care if the product works once the consumer has paid for it. This was obvious in my conversation with the Whirlpool service person. She took 10 minutes to gather all my personal information then took 10 seconds to tell me there was nothing they would do.

So after having the old white standby refrigerator and stove from the late 1970s, I figured it was time to upgrade. I have had theses appliance for TWO MONTHS! And they are starting to rust! I dont want to complain, I want a solution. Is there a law suit or advocacy to get our money back? I even bought the 5 year warranty, but found out that it is considered cosmetic!

I bought a Whirlpool Cabrio washing machine from Lowes 3 short years ago. Within the first year, it needed a new main board. Now just 2 years later, it needs another main board. It has never worked correctly. I have purchased another washer from another manufacturer and will never buy a Whirlpool product again and neither will anyone I talk with about this. Dont buy Whirlpool products!!

I have had an extremely frustrating experience with Whirlpool refrigerator WRT311. It broke after 6 months. So far it has been diagnosed twice with a faulty compressor and leaking coolant. Whirlpool will (seemingly) never replace an appliance--even if it makes no sense to keep trying to fix it. This is a $600 refrigerator! I cant imagine how much they have spent in repair costs. They simply send a service tech time after time, jerking the consumer around with no regard for what we have to go through to arrange 6 tech visits, some of them multiple hours long. Yes, we have had six tech visits, for a total of 10+ hours, and six weeks living with a broken refrigerator. As well as 30+ phone calls, hours on hold, etc.The refrigerator is loudly throbbing away after being refilled with coolant twice, and is still leaking coolant. Are they hoping the customer just gives up and buys a new appliance on their own? I wonder about the many positive reviews of their appliances: Are they fake? Are they churned out by Whirlpool? I have no confidence in this company. They are inept, if not crooked, and I would advise buyers to beware of poor quality and extremely poor warranty and consumer service.

We bought a Whirlpool dishwasher (Ser# F21102027MOD, Model# WDF730PAYB2) after reading some of the reports that it was just as good as a Bosch. Wrong! We bought this washer March 17. On May 17, the selector switch and sub control broke down. We had bought this item at the HH Gregg store here, and also purchased a 5-year warranty which they said we cannot use because the dishwasher is only 2 months old. Is there a lemon law? And what makes this worse is that we called Whirlpool on May 18th. They could not get anyone out here until May 25th to look at it. As of this time, they still could not fix it because the two parts had to be ordered. Today is June 1st and the part is still not in? Makes me think, does this part always go down because its on back order? So you are fully warned, do not purchase a Whirlpool. If I can get some extra money, I am throwing it out and buy a Bosch because I dont think it will ever be fixed.

We bought a fridge in November 2013. Brand new, paid about $2400. After a few months, the fridge wasnt keeping our food cold, was leaking from the ice maker, and wasnt making ice. I called for a repair and about a week later they sent someone out. He assessed it, then came back a week after that to replace the part. Within a month or two later, the same problem. I called for service and was set up with a new company. The repairman called me a couple days later and instead of setting up a time to come in, he says its a common problem, he knows whats wrong, and he will order the part and call me next week to come replace it. A week passed, no word. I tried calling the man back, left several voicemails, and no answer. After another week, I call whirlpool again and tell them I heard nothing from the man and at first they tell me they cant do anything with it since it is an open ticket and I tell them thats not okay. They need to close it, he never even came to the house and assign it to someone else. After they tried multiple times to call the repair company themselves with no answer, they assigned it to a new repair company. Again, it was assessed, a part was ordered and replaced another week later. So now its been well into 9 months of having a worthless fridge. A few weeks after that part was replaced, the problem was back and I called again for repair. I was told if this problem is not solved this time I would be eligible for a replacement fridge. Obviously, it did not work so I called to have a replacement fridge at the end of August. I was told that someone would call me to set it up in 5-7 business days but maybe a little longer since Labor day was right around the corner. I waited, patiently. I called every few days for weeks until mid October and kept getting told it had not been assigned, they are really backed up, it will be just a little bit longer and they will send a message. Mid October, my sister in law called for me and she was told that it was denied because I had not had it serviced within the last 4 weeks. WHAT KIND OF ANSWER IS THAT??? Thats like putting salt on a wound!! I have had spoiled food, constant clean up of leaks, and constant wasted calls to get told that it was denied because it wasnt serviced in the last 30 days while I was waiting for a response from Whirlpool??? So of course I grab the phone and go off. They agree to reopen the case because it was denied for a bad reason. At this point, as I type this, I have been on hold for 55 minutes to speak to yet another supervisor because it has been 2 and a half weeks since they reopened my case and I am told it has not been assigned and the best they can do is send another message.

WHIRLPOOL MICROWAVE HAS HAD MAGNETRON GO BAD 3 TIMES IN 1-1/2 YRS! I bought a Whirlpool Microwave Hood Combo Oct 2009. July 2010 the magnetron went in it! December 2010 the magnetron went in it AGAIN! This time we had to pay the labor to have it repaired because it was 2 months outside the warranty period. We did not want to pay because we knew having the same part go twice in one year that something is wrong with it. Whirlpool told us that if it happened a 3rd time that they would most likely replace the appliance for us. Well....July 2011 the magnetron went AGAIN for the 3rd time! Whirlpool told us to take it to a licensed shop to have it diagnosed to prove that it was the same part as the previous two times, fax paperwork from the prior two times, and have the shop call in the diagnosis of the 3rd time. We did all that, and they told us they wouldnt do ANYTHING for us because it was outside of the warranty period! Well they knew that when they told us we had an opportunity to get it replaced! THE SAME PART WENT BAD 3 TIMES IN A 1-1/2 YR PERIOD OF TIME. We trusted that the Whirlpool representatives were being honest with us during those phone conversations. Whirlpool can not explain why representatives would give us hope of a replacement (although each conversation is documented by their login and employee ID number). So not only did I buy a brand new MSRP $619 microwave, I paid to have it repaired the 2nd time, and to have it diagnosed the 3rd time, uninstalled and reinstalled the microwave each time, the inconvenience of not having use of the appliance during each occurance, and the unbearable suffering of calling in to customer service and repeating the story over and over to each representative. My house is brand new (we moved in to it November 2009); we bought ALL our appliances from Whirlpool. All I get for an answer now is sorry. That doesnt help me any financially having to repair and now replace an appliance that has been in use for only 1-1/2 yrs! I have seen $39 microwaves from WalMart last several years, so what is wrong with Whirlpools manufacturing?! Customer Service is unreliable, untrustworthy, non-sympathetic, and insanely frustrating! My question for Whirlpool is...why cant you make a product that lasts better (better quality=longer life=healthier environment and happier customers)? Why cant you stand behind your products better? Dont you care about the impact youre making on us emotionally, financially, and environmentally? The model # is GMH6185XVS0 Serial # is TRY3111264.

I have a Whirlpool Duet Steam Washer that will be two years old in September 2013. It has been making terrible, loud noises during the spin cycle for a few months now. Repair tech told me it was the bearings and very costly. It will cost me over half of the original cost to repair a less than two year old washer. This is my second Duet front loader from Whirlpool. The first one was a drum issue and the rod ended up snapping. Again, very costly so I bought a new one. I should have learned my lesson the first time. I do not agree with extended warranties and it is just an additional money maker for the manufacturer. They should be making the product so people do not have to purchase those. Anyway, back to the washer at hand. I refuse to spend that much on a newer washer and will never purchase a Whirlpool product again. I will let this thing bang for as long as it is going to last. Unfortunately have also just purchased the dryer that matches this washer since I still had the old model Duet Dryer, so kind of stuck with them. Spent an hour and a half yesterday on the phone talking to people at Whirlpool and they really dont care if you have an issue or not no matter how old your machine is. They just want you to have purchased the extended warranty or forget it. There should be a recall and they should be helping these customers who all seem to be having the same issue. Done with them!!

I purchased a Whirlpool Cabrio washer and dryer. They work well but the washer underneath lid has rusted already. I did purchase the washer in Dec. 2011 and in June 2012 the inside lid to my surprise had rust on it. I called the Whirlpool company and was told that is considered cosmetic and not covered under warranty..

Most of my appliances are Whirlpool - dishwasher, refrigerator, clothed dryer and the Cabrio washer. The washer before this one, I had it for over 10 years and replaced it because of rust (thats another problem with Whirlpool - rust). Now the Cabrio hasnt got all kinds of problems - UL, F1 and jumping. The serviceman asked me for $450 for repair; it included a set of springs for the drum, a new electronic board and a 30-day warranty on parts and labor. Im better off buying a new one (I cant afford at this moment). My wife is scared of the darn thing and refuse to use it so now I have the job of washing and standing guard to make sure the washer doesnt leave the garage. Thank you, Whirlpool - and my refrigerator works fine all rusted.

Inconsistent freezer and frig temperatures, with vegetables and fruits freezing in the fridge, even when temperature is properly set. Freezer control knob and vents too easily blocked. Unit is very noisy.

Apparently the planned obsolescence period for Whirlpool ovens and microwaves is 11 years. Last month, we had to get the oven repaired, and now the microwave has stopped heating. Coincidence??

Buyer Beware!!!! Warning!!!! Dont buy Whirlpool. Youll be sorry if you do! Dont buy appliances from Home Depot. Youll be sorry if you do! Purchased new Whirlpool gas range 10/29/2019 from Home Depot. By February 2020 the front door fell off, its not cooking properly (18 min frozen pizza takes 30 mins to cook). Clock not keep correct time. Whirlpool unwilling to replace the unit while the third party repair company, “well you should have bought it from us, we stand behind what we sell.” They have no idea when or if the parts will ever come in due to COVID-19. Its been down 8 weeks now.Even under threat of a lawsuit Whirlpool said, Sorry we NOT replacing it, go ahead and sue us. We covered by our contractual warranty agreement. Home Depot said they are unable to help due to their contractual agreement with Whirlpool. I have a dozen hours invested talking Home Depot and Whirlpool on the phone and have no more information than I did a month ago. Whirlpool Case # **. Next step is small claims and public shaming of Whirlpool!

I purchased this Whirlpool, model YGY397LXUQ04, electric range in midsummer 2011 and used it very infrequently for approximately 5 months as we were away for 6 months during the winter. On approximately June 15, 2012, we found that the keypad would only register 350 deg. F for the oven if we pushed the bake button two times and the oven temperature would go up to 550 deg; F if we pushed the 7 button 3 times. In discussion with the service manager from Whirlpool, he advised that the stove was out of warranty and they would supply parts at no cost but we would have to pay the labor costs which in my estimation would cost over $200. After searching the internet for similar problems, it was evident that this problem was not uncommon. I am concerned about the quality of this product and if it can possibly be a fire hazard. I would not recommend this product as the quality, possible safety issues and reliability are a significant concern.

2 TOP of the line fridges in 3 years!!! First replaced by company CO after I contacted him with outrage as fridge was nonrepairable at 1.2 years of life. Second diagnosed with similar same issue less than 2 years later on same model fridge. This is a rip-off from the company, absolute nonsense that fridge lasts on average 1.5 years with the price sticker over 2500$... Someone should put them out of business!!! This is scam not fridge!!! Stay away from this company, they are not what they use to be, NAME AND QUALITY IS GONE.

Whirlpool washer WTW7800 Cabrio - I bought this machine in Oct 2010 for $900.00. This October, the lid started not closing. Next thing I know, the glass is popping out. After waiting on hold for 20 minutes, I was told there is nothing they could do but refer me to a repairman at a cost of $179. The glass is popping out. This is a defect not caused by washing clothes but poor workmanship. I am on hold again. I am calling channel 3 news to do a story and will not stop until it is fixed.

I bought a Whirlpool WFW9470 Front Loader Washing Machine 11 months ago. The washer appears to complete a wash cycle but leaves the washing wet and with no error message or light. Whirlpool says the machine is not designed for light loads. The technician says washing on a light load will damage the bearing. We had the spin bearing replaced after 8 months. But still, the washing remains wet and the bearing wears out prematurely.