In my wildest dreams I wouldnt have expected that changing a burned out light bulb on a 7 month old microwave would put us out of commission for over a month. Its been 30 days now and Im told it will be more than 2 weeks before the part comes back in stock. Whirlpool had such a good reputation years ago, but thats history. This is a disgrace.

This is a Whirlpool dishwasher that has been functioning for 25 years! Much better than any of my 4 newer appliances. It has never had a problem. It is easy to load and unload. The dishes are always clean. Dread getting a new one.

This is about my Whirlpool Cabrio top load washer machine (model number WTW6200SWD, serial # CT3670597). I bought this machine in 2007, and soon after, I was having problems with the F1 code. After several trips back and forth to reset the code, so I can get the laundry done, and many frustrations, it was time to call Whirlpool to resolve the problem. I find out that there was a recall for this ongoing issue. They sent a technician to replace the mother board, and everything was fine for some time. Soon after, the machine was giving us more problems with the F1 code, and the UL code. It doesnt matter which way I try to balance the load. This piece of junk will not work. Whirlpool needs to stand behind this issue, and recall this washing machine for good. Every customer should be entitled to a full refund, and a compensation for the many hours of electricity, aggravation, and frustration, wasted trying to get this junk to work.

I havent had my Whirlpool Cabrio washer for even 5 years and I have had to replace the glass lid and now the tub bearings need to be replaced... I have read countless complaints for the same issue. I feel like Whirlpool should at least send out free replacement bearings and the $85.00 bearing press tool that you will need if youre handy enough to fix the problem yourself. PS to all of the poor victims of Whirlpool bearings, go to Amazon and you can buy the bearings and the tool for about $150.00. You will need to order bearings part #10435302 and the bearing driver tool #w10447783... And as far as my matching dryer - knock on wood - it still runs great.

Amongst all other items listed in these reviews (especially the tangling and twisting of clothes literally into knots), my guess is that is one way to ensure they are drier when they come out, wring them into knots... So now the pizza is slinging grease/oil all over the floor and water is leaking out from the bottom as well to make a perfect conglomeration of ** all over my tile. There is always more than one way to take care of the employees, hire sales people full of **, and technicians who know what the hell to do to fix it, with previous full of ** sales experience so consumers can buy more Whirlpool parts...

Bought the washer from HH Gregg for over $560 12/2012. Turned on power 4/2014 and just heard clicking noises then nothing. Had to get technician. Paid for $75 service charge and waiting for cost of labor and part for the lid lock/latch assembly. I see a lot of complaints with this new machine. I bought a new one BECAUSE I did not want any problems with repairs. Whirlpool is ripping off the consumer passing out this piece of discombobulated metal, wires and electronics. An appliance like this should last AT LEAST 7 years without a problem. I wish there was a class action lawsuit and will be waiting to the day it surely comes.

I had purchased a hot water heater on Saturday and installed it myself. I filled the tank and waited about twenty minutes before turning the power on. I waited a couple of hours before testing the water temperature and it was cold. I checked the temperature setting and it was set at one twenty five, I went to Lowes and informed the service person and was told there was nothing they could do about it, I had to call the number on the tank for Whirlpool. I called the number and was told they could come out to check it but we would be responsible for the labor charges. I didnt understand why because it was under warranty and we had also purchased the extended warranty. I informed my wife so she could deal with Whirlpool because I was going to work. My wife called a number of times and was getting transferred from one person to another and getting no help at all. She was told by one person that it was maybe a problem with the wiring in our home or maybe the plumbing. One person told her that it was not their problem. We had to finally pay an electrician to come out to look at it and had to pay him to replace a heating element. The cost of the electrician and the part came to an extra two seventy five dollars. The only real help that we received was from Lowes managers that were willing to take the water heater back if we could get an authorization number to return the water which Whirlpool claimed they did not have any type of a number. Our 400 dollar water heater turned into an almost 700 dollar water heater. We had also purchased a refrigerator from Lowes that was the Whirlpool brand that quit working after about four months and we had to pay to have it fixed. Needless to say, we will never again purchase any Whirlpool products or recommend them to anyone. The service was very very poor and we are not happy with Whirlpool.

This washer is poorly designed. Less then one year old and always has problems. I dont feel it cleans the closes. Does not always spin them. The load and go is a joke - had a service call because it would lock up - was told load and go does not work and not to use it - the washer was only a few months old. Now it will not even turn on!!!! - All other appliances work in the outlet - it does not respond. I will not even wash by good clothes in it - I take them to my daughters Samsung. I am in my sixtys and this is the worse washer I have ever owned, DO NOT PURCHASE.

I am excited that I found this site, putting it in Favorites! Using the advice from ConsumerReports, we purchased a Whirlpool Gold French door refrigerator model GI 6SDRXXY02. We were looking forward to the energy efficiency reported. I blamed the kids and my husband when the water started appearing on the floor by the refrigerator. After a while, I started investigating and I saw the sheets of ice that had formed in the bottom of the freezer. Several times, I removed the ice, only for it to form and start leaking on the floor weeks later. We discovered the drain was frozen and that during the defrost mode, water would freeze in the bottom, and once the ice was too high, the water would flow over the ice onto the floor. My husband has unloaded the freezer and defrosted the drain with a hair dryer several times. So sick of this!! We never received a recall notice and of course, the warranty is out. I wish we hadnt paid so much for this refrigerator. It would have been out by the curb months ago. We are in the middle of a kitchen remodel and getting new cabinets. I will have to dispose of this expensive refrigerator. UGH, money down the drain!! We wont buy a Whirlpool!!!

I had a Whirlpool dishwasher for year and it worked great, but the baskets were rusting. I decided Feb 2014 to purchase another Whirlpool dishwasher. It did not clear as well as my old dishwasher. The seller of the dishwasher stated it was our water or detergent. The water and detergent were the same. The only difference was the dishwasher. Day prior to changing the dishwasher, the dishes were clear and the day I changed the dishwasher, the dishes were not clean. November 2016, the main board has gone out. The part costs $148, plus the service call. I called Whirlpool. They stated they would sell me the part or would discount a new dishwasher. I think they should discount the part!!! Whirlpool makes most brands of dishwashers, so you cant change companies. Their quality is all you can get.

Buyers beware! I have had the Cabrio top loader washing machine for less than 18 months and it is already giving me problems. During the wash cycle, it sounds as though the gears are grinding to the point it wakes my family up two floors up! The spin cycle is a joke. The washer sounds as though it is going to spin off into another room! When I called Whirlpool, they told me to shut the circuit breaker. That might reset the computer. No go which I figured as much. I have had washers that lasted 10 plus years with no problems. It is not worth your time or your money. Never again, Whirlpool!

Purchased the oven in summer 2015. Very disappointed in the AquaLift Self-Cleaning oven. Absolutely useless. Does absolutely nothing and I end up cleaning the oven by hand. As a senior citizen, this is uncomfortable; I have injured my leg in the process and now feel I must wipe the oven down after each use. I was so looking forward to having a nice clean oven at all times and its not happening. This is of no value to me.

Im no longer buying Whirlpool products. They do not all up and are made like crap. My Cabrio washer being the most recent problem. Hinges broke on the lid and the drum spring broke. Out the door it goes! Im having my American made Speed Queen delivered tomorrow, the last Speed Queen I owned last over 30 years.

My Whirlpool washer would start up but would not add any water. It sat there doing absolutely nothing. Then it showed a code on the screen. It said to disconnect the power for 1 minute and plug it back in, which I did. I repeated that process several times. Still nothing. It also said to call Whirlpool, which I did. They wanted the Model # WFW97HEXLO and Serial #, I gave it to the gal on the phone at Whirlpool. I was told it would be a week before they could get someone out there to take a look at it. Really!! I work 80 hours a week and live in the country. I dont have a week. When I asked where the service man was coming from, he was coming from another town. I asked if there was someone closer. She gave me another appliance stores phone number. They showed up 2 business days later, looked at my washer, verified the code along with the Model and Serial #s, telling me it was the control panel. I gave that information to them on a Friday, they showed up on a Tuesday. They knew what that code was and what it meant for that make and model washer, but there just had to be a service call in there. The part was ordered on that Tuesday... here it is the following Saturday and the part still isnt here. I do not understand what takes Whirlpool so long to ship the part. Do they not care that in this hustle bustle life we live in, we dont have time to wait for a part that may or may not show up. Ship it overnight. That is an option. Making the parts accessible to the service people in a timely manner would make great customer-service. Better yet, how about going back to the old-style washers. This high-efficiency non-sense is highly expensive.

My mother bought these two years ago along with a washing machine and fridge. And now they are falling apart. The dishwasher wouldnt clean the dishes so my mother called the warranty people. It took a week to have someone come out and say it was fixed. The very first load it wouldnt clean the dishes. Now it takes another week to have someone to come out and say they need to order a part. Once the part gets here two weeks later it took 6 hours to fix. They replace the whole bottom half of the dishwasher, could have easily replaced the whole unit. Now a week later the clothes dryer doesnt turn on.

Whirlpool Hot Water Tank Thermocouple - This is the third thermocouple we have had to replace on this hot water tank in the last six years. Granted the part isnt that expensive, but the service call and replacement have cost us dearly. This is faulty tank and Whirlpool needs to recall this tank and replace them with new tanks. The price of this original tank and replacing this thermocouple three times has cost us over $800.00 total. I am not sure angry is the right word to describe our dissatisfaction with Whirlpool.

Our 2.5 year old Whirlpool top loading clothes washer started leaking from the bottom, enough to form a sizable puddle that ran under the dryer all the way to the wall. It was still under warranty so we called the company and they recommended a repair service. Guy came couldnt really identify the exact problem but said hed order parts to stop the leak. That was 6 weeks ago. He cant get the parts despite us calling about every week to see if the parts came in. So for the last month weve been taking our clothes to a laundromat. There seems to be no end in sight to this problem. Seems stuck between Whirlpool and the repair service and were the victims. And, oh yeah we got a note that says our warranty is ending soon.

My Whirlpool range, was purchased 14 years ago. It was fine until 2 months ago. I was preparing a meal for a dinner party and the oven went from low baking into Clean mode. (This cant be done by accident, it is many step process to go into clean mode) Locking the door! When I realized what was happening I immediately turned the breaker off but we still could not open the range door. Since the oven had my potato casserole and my Teflon coated cookie sheets inside it started to emit a toxic smell choking all of us inside the house. The unit was too hot to touch so my husband and brother-in-law finally donned gloves and got the range outside. I called Whirlpool the next morning and got the run around as to what type of range it was Kenmore/Whirlpool. Whirlpool finally sent someone out to look at the range and their determination was it caught on fire and melted! The company will not do anything about the unit or all the damage it cause because the range is over 10 years old. But they did not tell me this until I had spent weeks getting estimates and gathering information for them. I TOLD THEM DURING THE INITIAL CALL THE RANGE WAS 14 YEARS OLD. I TOLD THEM THE EXACT DATE IT WAS PURCHASED. Whirlpool sent me a letter from their Claims Resolution Department saying my DISHWASHER will not be covered and misspelling my last name. I have tried to call the person ** at least 25 times and she never answers the phone, only get her voicemail. I just wanted to tell them I was a little concerned about their accuracy with the typing of the name and product..... How complete could the investigation have been if they didnt even get the product correct.The smoke/smell ruined my microwave and ceiling fan. We had to paint the ceiling, redo wallpaper and professionally clean all the carpets and drapes on my first floor (we had just remodeled our kitchen last May so this was an expensive redo not in the budget. Not to mention the cost of a new range). I will NEVER buy a Whirlpool again. And I want to spread the word about the possibility of your range having the same problem.

Purchased Whirlpool side by side French door with bottom freeze on 2-18-13. After several repair calls it was replaced with new one on 7-09-13. Problems began almost immediately with water dripping inside door, resting of doors, and finally the freezer stopped working and the appliance would not shut off. Pm 3-14-15 a new compressor was installed. Two months later, the same issues are occurring. Freezer not working, and not shutting off. Waiting for a resolution. Would never buy another Whirlpool appliance.

I bought the Whirlpool Cabrio top loader set in 2006. Honeymoon was over after the first year and I had to change the dryer element then the washer with the F51 code six months later. Last year, I had to replace the heating element again! For the last six months, I have been dealing with the dreaded UL on the washer. I cant afford to pay a technician $100 to come out and tell me whats wrong let alone what they will charge to repair a problem that, from the looks of this message board, will never be fixed. I have no choice but to get it fixed in order to sell the ** machine. I paid $1400 for this brand new set and have already invested $500 in repairs. How is this possible? I had a 20-year-old machine prior to this and never had an issue. There are lemon laws for cars, why arent there any for appliances over a certain amount? How in this day and age can a company be allowed to sell such garbage? I will never, ever buy another Whirlpool appliance as long as I live. Any other brand can have my money any day.

I bought a brand new Whirlpool washer and dryer set -Cabrio- $1700.00 in 2011. It is by far the worst washing machine I have ever purchased, and I am 60 years old!!! It is now three years old and has been repaired at least 4 times. Long story short... after hours & hours on the phone, along with many threats! (By the way I had to ask for a manager two times up the ladder for this to happen as they just kept repeating that it was out of warranty coverage). I also told them that I was going to have one of my company trucks deliver this machine to Sears lot, along with a paid person to inform every shopper of my plight with this washer and the lack of service from Sears and Whirlpool! Whirlpool finally agreed to pay for the parts but not the labor on this most current repair. (This time it is the transmission!! In the past it was the Hub, twice. The gear case twice and the belt a number of times). I am now going back to Sears to request (that might not be the correct word) Demand, that they take care of the service bill for this machine. In between repairs, I have dealt with ongoing cleaning quality problems. This machine does not get clothes clean. I always have to wash them twice. This machine is loud. This machine does not use enough water to even dissolve the soap. So much for energy saving measures when you have to wash twice and still see soap and crud in the tub. Worst, worst, ever washing machine in my life!! By the way, I have an 8 year old Maytag too that I have never had to repair. Moral of the story, buy Maytag, or at least do not buy a Cabrio!!!!

Ive had other brands of washers and dryers and I must say I always return to Whirlpool. They are well made and do what they are supposed to. Never had problems. My last set of Whirlpool was about 12 years old. Great product.

I love that as soon as Im done cooking. I can lift my grate with oven Mitt, clean the gas cooktop before food becomes caked on. My stove looks as good today as day I bought. The third rack was great for holidays.

I own a Whirlpool Cabrio. I wanted a newer technology (no agitator) washer with top loading capabilities. I ended up with a four to five-year lifespan with this washer. The bearings are busted and it leaks water from the bottom. I have followed loading instructions specifically. It will cost about $1,000 to fix so of course, I am buying another washer and a matching dryer.

Whirlpool Cabrio Washer WTW7800XW is 13/14 months old (1 or 2 months out of standard warranty). We use it 3 to 4 times a week. The lid hinge developed a crack 2 or 3 months ago. Last week, it failed completely making the washer unusable. Investigations show that a new lid is around $250 plus tax and service call (approx. $500 complete). On contacting Customer Service, they continued to say monotonously out of warranty even though it is obvious to even a layman that this hinge/lid is not fit for the job and the manufacturing material has failed. They kept reeling off all sorts of protocols but would not send any of them as a copy. This is the worst service I have had from any company. The service is despicable and they should be ignored and banned from every consumer list. I appreciate that it is out of warranty, but the runaround I am getting seems to me that they expect their product to fail after the warranty expires and they are not surprised at all by catastrophic failures so soon.

August 15, 2011 - We purchased a new Whirlpool Water Heater Model N50T61-403 for $398 from Lowes. We used their recommended installer (that was our first mistake!). He made the following installation mistakes: 1. He connected the hot water to the cold water & the cold water to the hot water. 2. He installed DRYER venting instead of HVAC venting. 3. He used flammable tape on the venting instead of screws. 4. He had incompatible metals touching near the gas line which can create an electrical charge & thus, a sparking situation. 5. He left us with a gas leak. 6. He did not install the screen that is supposed to surround the base of the water heater.7. He failed to strap down the expansion tank.These failures were discovered by an HVAC person who was in our basement to give an estimate on a replacement of the furnace & AC coil at the same time this genius was installing our water heater. The installer overheard the comments & literally... he disappeared & we never saw him again! We told all of this to Lowes & they were not phased in the least -- indeed, they didnt even seem surprised! They sent out a few other guys from the same company to correct the errors. So, it finally was installed & passed the county inspection & we had hot water again... for a little while. Within a few months the water heater pilot light would not stay lit. I was having to relight it once a week or so. After much arm twisting, we were finally able to get Whirlpool to send out a new pilot light assembly and pay for the installation. It was installed July 25, 2012. And.... it worked for 8 months. After returning from a trip on April 30, 2013, we went to take showers & the water was cold. The same problem was happening again... The pilot light had gone out while we were out of town & it will not stay lit & I have to relight it every 2-3 days.We talked to an assistant manager at the Lowes store where it was purchased. He talked to Whirlpool & Whirlpool said they would pay for the parts but not the service call which would be $149. I also learned today from the same manager that Whirlpool will not replace the product until they have replaced the same parts three times. Hmmmm.... Lets do some basic math here. $149 x 3 = $447! Thats MORE than the water heater cost! We believe that the water heater has been defective from day one & we also contend that their replacement part for the pilot light assembly is also defective (by design??). A pilot light assembly should last longer than 8 months!We are getting ready to build a new home within the next year. We will get to choose our supplier & the manufacturer of the appliances that will be in our home. Needless to say, Lowes will not be on the list. They keep saying, Our hands are tied. (Not buying it!) And Whirlpool will definitely be off of our list as their customer service is the worst Ive ever seen & their product quality is sub par. The other thing I experienced with Lowes was that when I tried to leave a review on their site for this specific product... twice... both reviews were rejected. The reviews presented the facts as Ive stated here, but because they showed Lowes & Whirlpool in a negative light, they were not posted on lowes.com. So, consumer beware -- their reviews are heavily screened so that the negative reviews rarely get posted. The consumer should be aware that the reviews on Lowes website are heavily screened & therefore do not equally represent consumers who have had a negative experience. This is an integrity issue.

Whirlpool Gold Refrigerator Control Panel Failure - This French door refrigerator with freezer on the bottom was purchased new in November 2008. This August, the refrigerator stopped cooling. I contacted a reputable local appliance company who diagnosed the motherboard was not functioning on the appliance. They ordered a new one from Whirlpool and replaced it. Forty-five days later, the replacement motherboard stopped functioning. When I contacted Whirlpool directly to inform them what was happening, they continually stated that the appliance company was not part of Whirlpools approved appliance technicians, and offered no assistance in guaranteeing the problem will not continue to happen. I am extremely disappointed with Whirlpools customer service and unwillingness to guarantee their products. A 3 year old refrigerator should not stop working.

After purchasing 3 whirlpool items in the last 4 years and 2 of them breaking down a dryer last year, and my water heater today. I no longer have faith in your products. I am disabled and was a whirlpool customer, but after my recent experience with your failing products, I will not be purchasing any more! Its great your willing to send the parts for the water heater but, it costs $65 to have them installed. I bought from you because you had a quality item and obviously that is no longer true. Contact me if you still want me as a customer.

My Whirlpool Gold, Model # G16FDRXxQ06, has failed four (4) separate times. In each case I lost thousands of dollars, mostly in high-quality frozen foods. A Sears repair service representative came and repaired the refrigerator. In less than a year, after each repair, I had to call again. Three of these failures resulted in the loss of my food because the refrigerator simply stopped running. Unfortunately, I had been away from home for more than a week. One failure was caused by water leaking. This was apparently caused by a frozen pipe under the refrigerator. The repairman said that this was a routine failure for this Whirlpool model. I would like to recover my financial loss from Whirlpool. Is there a process to claim my loss? Is there a better, more reliable refrigerator?

Installers left and Home Depot Cabrio washer stopped with water left in tub. I reset GFIC outlet, tried again and it stopped. Did some research and tried different outlets. Same result. I discovered that if you shut off machine as soon as the GFIC is reset, then the washer will drain no matter what. I have been on the phone with Home Depot and they have no solution but to wait one week for a repairman. Very dissatisfying service. Now I am running a 20 foot, 3 prong, heavy duty extension cord into living area where there are no GFIC outlets and it has been running. I believe there is a fault in the washer, but they must not care if we get electrocuted from the faulty grounding of their Whirlpool product.

No get this and the dryer used. Top of the line. I am having fun seeing all the choices. I would recommend because of the efficiency. Measures soap and softener depending on the load size. Like a miracle.

Whirlpool Cabrio Washer - A total waste of money. My clothes are never clean. The low water system is rubbish. It doesnt work! Check out my pictures below. That is the result of a 63 minutes wash cycle. Dont buy this piece of crap.

Another person with problems called this a giant Whirlpool paperweight and he is so right! I received delivery of a Cabrio WTW7800XW3 washer on December 17, 2011. I had an issue (stopped in the middle of the cycle and flashed the letter “F” on the control panel) with it on January 2nd. I called and scheduled service. I had unplugged the machine and a few days later I replugged it and it started to work, so I cancelled the service call. In March, the problem started again. It just adds a little bit of water and then stops. Since then I have had repairmen out 6 times with 8 new parts installed and the washer still doesnt work. Now, the control panel won’t work. Whirlpool refuses to replace the machine. The repairman says these are the worst machines (any of the ones that are top load and have a clear top) he has ever seen and that I should buy an extended warranty. He says the bearings in the tub wear out among other things. On one of the repair visits, the serviceman found a chewed up pair of baby pajama pants. The machine makes a really loud noise like a jet engine taking off whenever it spins and the clothes are not clean. Whirlpool says that the warranty does not cover replacement of a defective machine. I have since researched the machine and have discovered that there have been problems with this line of machine for years. So, why are they still selling them? I am hoping for a class action suit. The company should stand by their products. I will never purchase a Whirlpool (or any other brand manufactured by Whirlpool) product again. I have had the machine for 4 months and it has been usable for about 2 of them.

Bought a brand new front loader washing machine and the 1st, 2nd & 3rd year has to call for service for the same problem! Sent one repair guy to the house and banged on my machine the whole time because he was frustrated and had to report because he made my wife nervous. Never again Whirlpool!

Does not get clothes clean. Period!! Takes just over 1hr. Noisy, lasted 3 1/2 years, transmission broke, take the warranty with a washer/dryer. Whirlpool was the top of the line, front loaders give less trouble, agitators clean better, go for the cheaper versions, our loaner Whirlpool, WTW4850H or WTW4950H washes quicker and cleaner than the Cabrio Energy Star.

We spent a lot of time researching to make sure we were making the right choice, found the one that was right for us. When it got delivered there was a problem though, the plastic scratch protector film they put on the doors for delivery left an adhesive residue that looked like dull spots all over our new shiny black doors. I immediately opened up the owners manual to see how they recommend removing this blotchy sticky residue, assuming we werent the first ones to ever come across this problem, unfortunately they only provide generic cleaning tips. So I went to their website and found what I was looking for. I tried all of the cleaning methods they provide, none of them even came close to working. So I grabbed some adhesive remover and tried that, it worked great to remove the residue however my microfiber cloth (which they recommend explicitly) started leaving scratches all over the finish.I called the customer service to see about getting a new door delivered, thinking this wont be more than a 5 minute phone call since I had followed all of their steps they provide both in the owners manual and on their website. Heres where I find out that their policy DOES NOT cover scratches/cosmetic damage, period. I tried reasoning with them, I had them read their own recommended cleaning procedures, and we both concluded that I had followed their procedures to the T! You might think that if the all of the typical procedures didnt resolve the issue, that would be the point where the customer service reps would have the ability to make a decision that satisfy the customer, you would be wrong! They kept telling me over and over that their policy doesnt cover cosmetic, therefore there was nothing they could do. It was delivered with a defect of sorts, how is the customer responsible for that? The only way I can see it having worked out in my favor is if I had never tried to clean it myself and immediately called customer service, I still fear they would have given me the same line of cosmetic damages are not covered even if I would have tried each procedure with them walking me thru it over the phone. Lesson learned, I will never purchase another Whirlpool product!

About five years ago, I purchased a top load Whirlpool Cabrio washer and matching dryer. For the past couple of years or so, this washer gets out of balance every spin cycle. It sounds like a mac truck running through my house. At this time, I do not have $300-$400 to buy a warranty when I feel that this problem is so widespread (via internet complaints) that Whirlpool should fix this problem. I replaced a perfectly working 13-year old Maytag washer simply because my dryer went out. I have contacted customer service with no results. I recommended this washer to my neighbor about a couple of years ago and now I am sorry I did. Little did I know that three years in there would have to be a repair. As you know, this isnt a bottom of the line cheap washer, therefore, I wouldnt expect it would be acting like one after this period of time. I asked Dave who at Whirlpool cared and basically, he had no answer. I told him that I would expect a company as large as Whirlpool to have people who have the job of searching the internet to see what people are saying about the company and if they did, they would know this was a problem with these washers and would initiate some sort of recall. This is such a bone of contention at my house that I wish the thing would just die so I had to go buy another (and trust me it wont be a Whirlpool). But rather, I get to listen to my washer thrust throughout my house every load I do.

I purchased a washing machine in year 2002. It was working perfectly. Recently, its drive belt started slipping. I called local service center, S. R. Enterprises, with mobile number 9204792391.The technician came after 3 days and declared that the gear box is leaking and will have to be replaced. They had no gearbox in stock for model f45, top loading, fully automatic.After a wait, they took away the machine to their workshop on 30.09.2011 and returned it on 04.10.2011.They charged me Rs. 4,730. I will have to be replaced. I found that its LID, which was perfectly okay, is now making a terrible sound when opened and would fall down, not allowing to load the machine. I informed the service center immediately. After many reminders, a man turned up yesterday and declared that the LID will have to be replaced and I will have to pay Rs. 2,000 for that. I rang up the service center to say, Since it has been damaged in your workshop, you should replace it free of cost to me. Their reply was evasive and negative. I called your call center and they registered my complaint - customer number **, comp. number **. I was assured that the LID will be replaced within 24 hours.

My Whirlpool is almost 20 yrs now and we thought we were going to have to get a new one! New ones aren’t equipped with what mine has so after much investigating we decided to try a water inlet part for $35 delivered and oh to our surprise it is still performing like new. We bought the top of the line and it still is! Thank you Whirlpool. You are what you say you are. Arlene **.

Purchased this washer 7 months ago. We are a family of 5 with A LOT OF LAUNDRY!!! I adequately researched a machine that could do large loads of laundry, WELL. I read at least 100 reviews and went forth. (Note to self that anyone giving this machine a decent rating, is a DIRTY, SMELLY, FILTHY LINEN WEARING FOOL who doesnt take much pride in their clothing cleanliness.) I proceeded onward and after paying A LOT OF MONEY for this 4.8 Whirlpool Cabrio Washer, I found out within the first two days of owning it, that IT IS GARBAGE! Regardless of the 4.8 drum size, you can only fill it less than 1/4 of the way with clothes, to even hope they will be touched by water. My clothes come out DETERGENT STAINED & DRY! Insanity... A washer that doesnt wet the clothes!!! We have had 4 repairmen come out within this time, because I am fed up! I have been physically shown and told now, by all 4 guys, that the washer will not fill more than 9 inches with water. They advised me to fill Home Depot buckets and throw them into the drum. THIS IS WHAT I DO, TO SATISFY THAT I AM WETTING MY LAUNDRY - PURE CRAZINESS! The repairmen told me to set all loads to bulky sheets + extra rinse + highest soil. This is a 1 hour, 26 minute initial setting. Note that my adding water messes up the computer readings and it will reset throughout the washing cycle multiple times. Even with all of this... the machine still doesnt wet the clothes!! The top and center of the load is BONE DRY! This machine will not wash sheets, blankets or comforters, either. Dont waste your time trying!!! Dont be fooled by the drum size. Your great grandmothers 1930s 1.6 cu ft washer washed more clothes in any given load. #1 My water bill is through the roof. #2 The washer constantly resets and runs on any single load for over 2.5 hours AND #3 MY LAUNDRY PILES HIGHER AND HIGHER, as you cannot put more than a smattering of clothes in the machine, at any given time! GARBAGE, GARBAGE and MORE GARBAGE!!! I would be better served to find a stream and a flat rock and start doing my laundry colonial day style! I am done... Finally had enough of this insanity! RETURNED THE MACHINE THIS MORNING!!!

Purchased over range microwave WMH31017AW-2 from Best Buy Mar. 12, 2015 and after installing it noticed code Door appeared and that there also was a dent on side. They replaced on Mar. 19 and we had the same Door code problem. Called Whirlpool and they sent out a Tucson repair tech and he ended up coming out at least six times changing 3 switches, 2 cams, 2 brackets, control board, and line filter. Still had problems and Whirlpool requested he call their tech and he did and they told him to make the same changes and he told them he already did all that and there still was a problem. Then Whirlpool told him to switch some wires on control board which did not solve anything. Then second thing they told him was to file and clean door brackets which also did not solve the problem. We called back to Whirlpool to tell them we did not want this defective microwave any longer as all these repair trips were not solving anything. They wouldnt give us a answer right then and said they would call us back 24 to 48 hrs and we are still waiting. We will never recommend Whirlpool to anyone nor ever buy from them again.

Refrigerator is only 4 years old and must be defrosted every 2 or 3 weeks as a thick sheet of ice forms in the bottom of the freezer. Also the appliance frequently emits loud cracking noises.

I purchased this washer over 8 years ago and we have been using it 3 to 4 times a week/ 52 weeks a year since. It has performed flawlessly up until about a year ago when it kept given me uL error. Everytime I wash the basket always spins wobbly and unbalanced it seems. I checked the Internet and it turns out others have had the same problem. The solution was to replaced the 4 springs supporting basket and that fixed the problem. Been working ever since.

Same old story! Whirlpool Cabrio is a lemon! I did pay a service guy to find out what the problem was - $70. I ordered a control board for $210, I still had the problems. I ordered bearings for $80. Yay, my Cabrio works! Well, this was all 4 months ago and here we go again. My washing machine is doing everything it was before I replaced the brand new parts. Im so mad! I spent $360. I couldve had a new washer, not a $1000 Cabrio, but who cares at this point! Anything seems better than this pile!

I bought Whirlpool front load washer at Sears in June 27, 2012... (serial W104408696A) (W10409178A-SP). I had 6 episodes within a 1-year time that my clothes got burn holes and the inside of the washer. I would find a handful of gray powder after doing my laundry. The first time it happened, I thought that I left something inside my clothes that resulted to it, but I did nothing to contribute to the event. The second time it happened, I thought Im putting the wrong setting, so I chose another setting to wash my clothes. In that span of 1 year it was on and off happening. I read different reviews on this washer, and I am not the only one whos had this problem. Finally in 2013, before my warranty would expire, I requested for Whirlpool to fix the problem. Right away the tech told me that the problem was the glass covering, so they replaced it. Now my washer would not drain. I believe that this product does not belong in the market. If they knew what the problem was, they should have recalled it. I kept the sample of that gray powder.

I am getting numerous F1 codes on my Whirlpool Cabrio washing machine, Model #WTW6600SW2. By doing thorough research on this issue I can see the problem is in a known defective control board (part #W10130544). This part has even been replaced by Whirlpool with a new control board costing around $300 for just the part. After calling for repair service, two people (1 agent and 1 supervisor) refused to acknowledge any known issues with this part and further refused to any type of repair or replacement of the part. It is impossible for anyone in that position to not have knowledge of this problem. Simply look on the internet for a countless number of people with this very same complaint. Even though my washer is eight years old it has had very little use. There are only two grown adults in this household and the machine has never been abused or overused. It still looks new. Whirlpool should be honest and responsible when dealing with this type of problem. They should agree to pay for the part and repair service... at the very least they should agree to pay for the part.

The damper switch at the top of my water heater, one I purchased at Lowes stopped working. I talked to someone at the local store, and I was told I had to contain the manufacturer. I called the number on the front of my unit. The tech talked my husband through the restart process...not once, but on two separate occasions. We were told that because it was intermittent, something they decided Over the Phone, they could do nothing. They would neither send a replacement part nor a technician. By the time we had to call back two days later, restart was impossible. JUST to get the part, a specialty piece, we now have to pay for expedited shipping! And either install ourselves, or wait 5 days After Arrival (!!), to get the stupid thing fixed! If they had sent the part out originally when we asked, we wouldnt have to wait for hot water or pay anything for a warrantied piece! Its a racket. Stay away!!!

When I bought my new retirement home, a Whirlpool dishwasher Model No. DU1055XTVS1 had been installed. After only three years of use, the dishwasher would not complete a cycle except to drain and cancel. The repairman replaced a computer board and when the parts cost and the service cost were combined, they amounted to about half the cost of the dishwasher. I have a PC that is twice the age of the dishwasher and it is still running.

Whirlpool gold series refrigerator - We obtained this appliance in 2013. The ice maker stopped making ice. Later on it began to make super loud popping noises. Stops cooling, doors are rusting, drawers are broken. We do not have extra money for costly repairs. The Whirlpool brand was worth $2500 and the letdown priceless. Do your homework before purchasing a Whirlpool!!

I just purchased a new Whirlpool 6th Sense hot water tank #333570. This unit is a piece of garbage. Whirlpool should be ashamed at the quality of product they make. This unit came with a bent temperature and pressure relief valve, which required a piece of copper tubing to be bent awkwardly just to remedy the situation. Also, the control box is set at 12 (most other brands are 14, which is common), forcing the gas lines to be re-piped (very expensive). This unit also is extremely noisy, runs really, really hot and is not energy-efficient at all. Shame on me for not researching this product more closely. If youre buying a new hot water tank, steer clear of Whirlpool products.

Purchased a new French door Whirlpool fridge May. It replaced a Whirlpool that was here when we purchased the home. Ten days after purchase the fridge went to 21 degrees and began freezing over food and drinks. Yesterday a tech replaced parts to repair the fridge. Today the fridge is once again at 21 degrees and freezing food and drinks. We live in a relatively rural area. Tech cant come back until six days from now. Very disappointed. Wish we considered another brand.

We had purchased an 80-gallon hot water heater less than five years ago. The tank started leaking, so the whole hot water heater had to be replaced. The previous unit we had was at least 10 years old, if not more. We are extremely displeased with the quality, and very upset with having to outlay such a large amount of money within five short years. Whirlpool has certainly not earned our trust in their workmanship.

I purchased our brand new double ovens on 9/27/11. I was happy until 11/3/11 when the inside glass exploded, shooting shards of it all over our kitchen during the self-cleaning cycle. I immediately called Kitchen Aides corporate office in Michigan. She said that she could send a technician out to access the damages but didnt see that this was a product issue. Like I dont know how to properly push buttons to self clean! The technician came out the next day and said that he was only authorized to replace the glass, nothing else. He couldnt tell me why it shattered, he thought perhaps there was a bubble in the glass during manufacturing. I said I think it needs a whole new door at the very least, but more likely a new unit. I just paid $3000 for what will be a refurbished oven after one month of use. Today, I called once again to tell them that I am not satisfied with new glass, not to mention my oven is unusable in its current state and still has glass sipping out. I spoke to a woman in their safety committee department, who told me that Whirlpools warranty is replacement of broken parts, nothing more, and since only one pane of glass broke and not the door physically, they couldnt authorize a new door or new oven. Mind you, that we still dont know why it broke, was it just faulty glass or could it be a heating problem? She didnt care, only that they could only repair the glass. I asked if the glass could be overnighted since I have been without an oven for four days now. She said that she had no way of doing that, so I asked if I could speak to the parts department and she said I could not, that only techs could contact them. I asked if she could do anything for me? Could she assure me that it would be fixed within the week? No. Could she assure me that it would be fixed by Thanksgiving? No. Whirlpools policy clearly is that once you purchase their products, they have no intentions of listening to their customers complaints or concerns only to do the very minimum required.

We replaced older GE with the giant front load model that can do king size sheets and comforters. It has worked like a champ. It was a bit more but worth it for us. In a year and a half no issues no problems and I like the control lock feature so I dont keep hitting it off when I go thru the laundry room to the garage.

I called and emailed Whirlpool because the water dispenser drips all over the front of the fridge and floor. They had the nerve to tell me to use a cup for the problem and there was nothing they could do. They were no help with this problem.

We purchased a Cabrio model WTW6600SB2 washer, it has lasted 4 years, then when the pump went out, we paid $200. To fix it then on the 2nd load, it went out, now the tech man says the motor is cracked and Im not sure if the motor is replaced, it will even work. I looked at the motor and it is made of plastic! Can you believe this? Plastic! I didnt believe it until I saw it with my own eyes. I will never purchase a Whirlpool appliance again nor will any of my relatives or friends if they ever ask my opinion.

Our side by side refrigerator is 2 1/2 years old. The LED lights are not working. Had to call repair service because one cant get into the housing without a service tech No9 normal screw in light bulb to replace 2 burned out light bulbs AND pay for the service call is $475.00. THIS IS HIGHWAY ROBBERY. I would expect to pay for a major repair BUT A LIGHT BULB. DO NOT BUY A WHIRLPOOL REFRIGERATOR WITH LED lights. This is a major flaw in their manufacturing and If they go out again the fridge will go to the landfill.

Everything I have read is what I am going through... First the clothes didnt come clean. Lint piles on everything dark... Then at 1 yr and 7 months old, the drum and spin mechanism breaks. It cost me $333 in labor... Should have cost me nothing as far as Im concerned. 2 weeks later, its putting a code up that the hot and cold lines are crossed. Nope, its the whole computer board. Whirlpool again said they will just pay for parts... piece of crap. I paid for the best... Sure didnt get it.

I bought a whirlpool washer from Whirlpool on February 27, 2011. Since then, they have come out and repaired the washer for 5 times. They have even taken the whole motor out, and replaced it. The last time they came, they said I would have to pay for the next time. Now, it has broken again, and I have to pay for a washer repair that is less than a year old. We bought the Whirlpool washer at Sears, and neither Sears, nor Whirlpool will stick by their product. We cannot afford another new washer, and to pay for repairs is a stretch too. Is there anything you can do?

I purchase December 2019, I had my previous stove for 20 years and wanted a new fresh look. I purchased the stove during a Black Friday sale. Started having problems with the door not closing. Customer service hold time took days and hours of hold time. Took 3 weeks to repair. Now seeing and hearing sparking and its week before Thanksgiving NO STOVE AT ALL. DONT BUY!!!! What happens when warranty is over????

Whirlpool WRF989SDAM00. We bought this junk April 22, 2013. 7 visits from service guy throughout the entire year we have had this, problems began almost immediately. Whirlpool gave us a 3 month complimentary warranty (which is up at the end of June). Same problem is back (back left corner freezing up and I think it has also made our ice maker not work nearly as good as it should). We called a few weeks back to report problem yet again, the rep on the phone treated us very poorly. They said they have a new part that is currently on back order that is going to fix the problem once and for all to which my husband replied: I do not have much confidence this will fix the problem as you have sent 5 or 6 new and improved parts over the year and all has failed. He then asked, will you extend the warranty once more, and they said NO. We are stuck with a ($2,700) piece of crap that they just keep trying to find new parts to fix it! On a separate call we asked for a refrigerator replacement to which the rep basically laughed and said that will never happen!! What course of action can we take here?? This company is dead to me!

Whirlpool’s customer service is one of the worst I have encountered. They consider a 6-7 year old $1500.00 range to be old! I said to her, “Wow, if the population was to throw their Whirlpool appliances into the landfills after 7 years, this would be quite a horrendous situation.” I think its disgusting for a company to build appliances with a shelf life of 6-7 years and with only a 1-year warranty! What a horrible brand! I will never buy another Whirlpool brand product ever again. You spend $1500.00 on a range oven and then around 5 to 7 years the control board blows out and costs another $500.00 to replace plus a service agents fee to remove and install.I asked the Whirlpool agent if I could get the control board discounted and she refused and said, “I am sorry, we are unable to help you.” Pathetic! Their cost on these boards is around $120.00 or so. I was told by an appliance service rep they could discount that $500.00 board even half and still make a decent profit. Do not ever buy Whirlpool. Go with other brands instead. Their customer service policies are horrible. Your hard-earned money will be buying an appliance with a 6 to 7-year shelf life before major repairs.

Got a fridge Friday night setup, and was not cooling as of Sunday still. Called Best Buy who we got it through and they sent someone out first thing Monday AM to look at it. Per the Whirlpool agreement, the first year has to get serviced through them. Finally got a hold of their service support to get someone scheduled to come on site. 11 days later was the earliest appointment, and they just expected me to deal with no refrigerator for 11 days. I asked of other options, what wait times would be after Whirlpool comes out in 11 days to deem it broken and they repeatedly said I cant give you any what if answers for anything. Were no help at all and just expected me to figure out things for at least 11 days on a brand new 3 day old machine that is broken. The absolute WORST customer experience ever and refuse to buy from them again. Thankfully, Best Buy has a return window so were completely returning it and going with a different brand.

Whirlpool side by side - What more can I say? A 1-year warranty is all Whirlpool can afford to give anyone since the compressor broke a few months after. They are paying for parts, but we are paying $300 for labor to fix a $1,200 fridge... in addition to having to be without it for a month, losing defrosted food, etc. Fortunately, the dealer gave us a loaner.

Whirlpool serviceman came out to see why our brand new dishwasher didnt dry the dishes and left pools of water on glass bottoms. Repairman said all the new dishwashers are like this. The heating elements do not heat hot enough so that the machine gets a higher efficiency rating. He said the solution is to use the dishwasher during the day and at the end of the cycle, open the door so the dishes air dry. My previous 24 year old GE dishwasher did a great job of drying the dishes even when we didnt use the heated dry cycle! The only reason we had to buy a new dishwasher is because we bought a new house. I am very disgusted with the Whirlpool dishwasher. Might as well do dishes by hand.

This unit is without a doubt the best microwave I’ve owned. It is reliable, cooks to desired doneness. It defrosts and rewarms perfectly. For the price I do not believe that there is a better performer. Would highly recommend with no reservations.

Update Review on 10/15/2020: New refrigerator 12/31/19. 4/27/20 Fridge terribly noisy, called Whirlpool directed to local provider. 5/5/20 Fan replaced, drawer clip broken. 5/11/20 Drawer repaired. 5/21/20 Fridge not keeping up, repair company said new compressor needed. 7/6/20 After numerous calls and literally hours on hold with Whirlpool compressor install but still seemed noisy. 9/30/20 Fridge partially cooling, no ice and water dispenser not working. Repair company ordered new evaporator cover and UI panel.10/15/20 Neither the repair company or Whirlpool know when the parts will be delivered. Whirlpool has no record of their being a service call or parts ordered. I talked to one rude, unhelpful and uninformed service rep. After following their instructions and using their recommended warranty provider, they claim not to have the issues in their system and cant be used to determine the repair/replacement of their unit. He indicated, You need 3 major repairs in 30 days to get a replacement fridge. It took them 6 1/2 weeks to repair the compressor. How can it break that many times in 30 days with that bad of service. Nothing is repaired in 30 days. The current rep seems to care and have a working knowledge. She is sending a request to determine when a part might be delivered. She couldnt give any indication of when the part might be delivered to complete the repair. Days? Weeks? Or again Months? An hour and a half on the phone with very little progress. New refrigerator with 3 major repairs and one small one in 9 months. Terrible refrigerator and extremely poor service! Go with another brand.Original Review: Refrigerator new in January 2020. The first issue was an extremely loud fan.It was replaced. While being repaired, service tech broke a tab on the door. (It happens) Another call to replace the tab. During May I notice its not making ice and freezer isnt keeping up. Lose all items in freezer. Now the 4th call on new refrigerator, tech says needs a compressor and orders while at my house. Soon the refrigerator isnt keeping cool. Now 34 days later, still not fixed. Whirlpool service provider blames Whirlpool. Whirlpool says they are shipping compressors but cant exactly say mine is delivered. Apparently, 4 service calls in 5 months and over a month with a totally broken refrigerator is their bar for a good product and service. Neither their approved service provider or Whirlpool care in the least. Awful service. Try another brand!

Bought a stainless steel Whirlpool Gold bottom freezer in 2011. I purchased an extended warranty from Lowes (4) years, and still have another year left on it. Im constantly having to mop up puddles that form under the right front of the refrigerator. I read someone elses review with the same issue along with a sheet of ice forming in the bottom of the freezer and having to chip it out so the freezer drawer will close! Im calling the warranty company today.

Had this model (WMH73521CS-6) installed as part of kitchen remodel. After 8 months, microwave is failing, indicating door needs to be opened, then closed to operate. This does not fix the issue or reset the condition. AND, there is no way to reset the microwave electronics, not even power cycling (unplugging and replugging from/to electrical outlet).

My dishwasher was only 18 months old when the rack adjuster broke causing the top rack to collapse. I researched and was able to order the replacement part which now comes only in metal. (The original Whirlpool piece was cheap plastic.) I spent $40 for the new part and spent several hours installing it without any help from Whirlpool. Then when I tried to use my dishwasher it wouldn’t run. Repair person came out and diagnosed it with a pump assembly failure. Part alone was $222 and it was on back order. Extremely disappointed. I have tried to contact Whirlpool to see if they would at least offer me a discount on the part. Their customer service number is never available. On hold for so long I finally gave up. Maybe I just got a lemon but I will not go with any Whirlpool product again.

Owner of 20 apartments, 16 of them have electric water heaters and 4 have natural gas units. Have replaced over the years all 20 water heaters. 19 of them were replaced with Whirlpool units bought at our local Lowes. It is my opinion that they are very unreliable. The tanks rust out in NO time. The electric units last just a little better than the gas units but still terrible. Of the 4 gas units so far I have had to replace 3 of them and the longest one lasted 6 years and 7 months!! One of them was just over 6 years and the other was 9 days away from warranty expiring. They replaced that one. If you have no other choice make sure to buy extended warranty if available. They just dont last!!

The wash machine is JUNK. We paid $2500.00 for our washer & dryer at lowes in 2012. I HATE IT from the start. It has destroyed most of my clothes. I hate doing my clothes. The water does not get my clothes wet, they dont get them clean AND the washer dont even get them wet. THEY need to do a recall or get us a lawyer. ALL the money I have put in this washer. The price we paid for them is a SHAME. IT is WRONG they are telling people that this washer is the best. They lie. I HATE HATE THEM.

The washer has rust under the rim in the inside - also the paint is bubbling and peeling under the rim of the washer. I contacted Whirlpool and was told that is a cosmetic problem. There is no warranty for rust or peeling paint. I will never buy another Whirlpool washer. I paid over $700.00 for this washer and I dont think I should have a rust problem after 5 years.

Whirlpool is an awesome fridge. There was plenty of room for everything. I loved the freezer part too. I would love to have another one because mine was in a fire in 2015. You will like Whirlpool.

I purchased a washing centre at Canadian Appliance Source. I paid to have it delivered, installed and for them to take away my old appliances. I had several issues and when I called the store, they sent me to Whirlpool warranty who dispatched a repair technician a few days later. With nothing solved to my satisfaction, I called Whirlpool again. I spoke to a customer service rep who gave these responses, she put me through to a manager who gave me the same responses. When I asked to speak with someone above her, she said she could put me through to another person at her level but noone at a higher level.I want to hear the same response again? Really? Her only other answer was to email the Whirlpool Executive, which will be my next step. This is a summary only of my experience of the first few days after the purchase.Problem: The first load I washed was 1 set of blue sheets with 2 pillow cases. The water didnt seem to cover the load but I thought when it started to wash, they would get wet. When I took the sheets out of the washer, there were several dry spots and some kind of residue on several areas, so not washed or cleaned as expected. I tried washing one sheet, same thing. Tech solution: Put in some wet items to the load so the washer thinks the load is heavier and will add more water, or add a bucket of water to the load, Really? Whirlpool response: The washer is working as expected. Really? Problem: I did a warm water wash, expecting the machine to dispense a mix of hot and cold AT THE SAME TIME making it warm water. The washer starts with cold water then stops and puts in hot water. I dont want cold water or hot water on this load I want warm as recommended by the manufacturer! Tech solution:Dont use warm water wash. Really? Whirlpool response: Works as expected. Really?Problem: Dryer is way too hot on the delicate cycle, not good for delicates! Tech solution: Use the air dry cycle. Really? Whirlpool response: Dryer is working as expected. Really?Problems I didnt even discuss: The load is really really wrinkled when it comes out of the washer. Who wants to have to go back to ironing everything they own? The washer tub and dryer are really really small! I should have read more reviews and headed the warnings! Comments: I purchased online, biggest mistake. The store will not take it back. Whirlpool will not take it back. Hindsight is 2020! If I could have given negative stars, I would have.

Rather than replace the heating element in my 15 year old Sears dryer, I opted to replace both my Sears washer and dryer with a new HE Whirlpool. It was the biggest mistake that Ive made. The washer does not have an agitator and the clothes turn into a twisted knot. Deodorant did not wash out of load of three sweaters. When I called tech support, the woman told me that the washer met specification. I suppose that means that it uses only limited water but has nothing to do with the cleanliness of the finished load. I was told by the repairman that future calls regarding unclean clothes would cost me despite a warranty that I purchased from Lowes.He suggested that I wash on using the Bulky Items setting and with a specific laundry soap. The setting provides more water but without the agitator, my clothing turns into a huge knot and comes out of the machine dingy despite washing loads for over 60 minutes at a time. My electric bill has gone up because I have to also add an extra rinse. The machine frequently become unbalanced. My dryers seal started loosening up two years after my purchase and finally became twisted in a sheet and ripped itself loose. Whirlpool has lost all future business with me.

I purchased a Whirlpool cabrio mod. wtw5840bwo washing machine in Oct. of 2014. As of June 2015 I am ready to kick it to the curb. The washer works to it design and hasnt broke down but it doesnt clean our clothes. We load the machine, add the right amount of clothes and recommended detergents and 1hr later after the wash cycle is completed, the clothes still stink with the smell of daily perspiration. I went back to using our old washer that has a worn out agitator. It does a better job.

This washing machine has been the worst machine I have ever owned - I have called Paddys Market on several occasions to have a repairman come out and take a look at this machine, which they did - but the machine never got any better - it has never ever washed my clothes properly its a piece of garbage - clothes come out dirtier than when they went in and sometimes come out dry. Its so busy trying to save water - it doesnt use hardly any - and forget doing bigger loads - I WILL NEVER BUY ANOTHER WHIRLPOOL product again.

Whirlpool has been a well known brand for many years producing well made appliances. With strong customer support and appreciation. I myself have owned many appliances made by Whirlpool from Fridges to Washers and Dryers with no problems.

If you come across any problem or issue with washing machine, the service person will come and will have a typical vouge glance of the washing machine.. and the inner bearing problem etc. He will arrange a call with his boss.. who also tells the same thing… and collects Rs 450/- as visiting charges and goes. They ask you to bring the Washing machine to their showroom... on account of repair they do all nonsense and do replace some parts which are not at all required...*** Instead of going to the show room first, if you take second opinion from any local repair technician... you will be shocked to know that hardly it is very minimum problem like loose connection, biting of wires by rats or other problem which would just resolved in front of us..But certainly not the Big issue as these show room service mafia does.. I have encountered the same brought the same to the notice of the Care Manager Mr.**.. But no proper answer... One should understand that there is big mafia kind of activity just betraying the customers.. Please beware of the frauds of the Whirlpool Washing machine Servicing Team..

The board manufacturer number W10312659 went out. They replaced the board. The oven was 6 months old, luckily was still under warranty. We didnt purchase a extended one because mostly it had a good name and brand. Well after a year and a half the board went out again. It gives error code H5P which there is no error H5P. So the boards out. It is very costly and thats with you doing your own service. Never will I buy another Whirlpool stove.

I am very upset about this Washing Machine and Dryer. I did my research in 2012 and found good reviews on drum size, water usage, bells and whistles. I purchased the set in Feb of 2013 (its on Jan of 2017). NOT EVEN 3 years later, I write to say that my washing Machine is ready for replacement! I paid 989.00 for each and last year the Spring on the Glass Top was worn away, I am told because bleach was splashing up in the spring area. Cost to fix with a local repairman... $235.00. Now I noticed a small amount of water on the floor, move the washer and there is a LARGE amount of water Stain and my cycles keep popping up UL. Two separate repairmen (because I didnt believe my trusted first one) tell me the cost for the shot bearings and seals will cost almost as much as a new washer! I am a family of 3. I have a daycare so do a few extra loads, but am not using this any more than average to low use. Not to mention that on top of all of this the computer appears to be shorting out and to order a new panel the repairman places that at an EXTRA 300.00. SO UPSET! The dryer dries very nicely and is quiet however, the motor went out 6 months ago and we replaced that, not wanting to but better fix than scrapping it only 3 years into a product expected to last well over 10! The little clip on the door to lock it is also loose and hardly locks now. The repairman is having trouble even finding the small part. Young Couple Expecting to have a brand new 1900.00 washer dryer set last a long time only to be out of warranty and already needing to buy a new set! DONT EVER BUY A CABRIO WHIRLPOOL.

This is my second water heater in three years. The problem is the thermocouple thermostat. Also, when I drain the water, it comes out of the heater black because of the corrosion in side. I spoke to people in the company, and they were nasty to me. This happened to my two heaters in 2 1/2 years. Please, do not buy a Whirlpool heater.

I purchased a new Whirlpool Cabrio washer and it has been nothing but a headache. The machine constantly rips our clothes and stretches them beyond repair. Now, the washer keeps showing an F1 error code and I have to restart the machine three times to get it to start. It also stops in the middle of the cycle and I have to restart it. What a piece of garbage! I called Whirlpool several times and they do not stand behind their products. Do not buy Whirlpool. I filed a complaint with the Attorney General and I suggest anyone else having the same problems should do so. Maybe we can get this machine recalled.

On October 21st 2011, Michael sent their technician, Steve, to my residence to check my washing machine. I was in the house the whole duration of his visit. After testing he concluded that the control board of my machine is faulty. Although he brought with him his own control board but he never showed me my machine working when he installed his control board, even though I was in the house at the time. With my lack of knowledge at the time, I missed requesting that he show me the machine working with his control board. But he should have involved me in the diagnosis since I was just home and should have been his initiative. Anyway, Steve then said that the total cost of the control board plus service is $194.03 on top of the diagnosis fee of $81.19. I was taken aback with the cost since working used washing machine on Craigslist just cost $150. So I said I can only pay him for his diagnosis of $81.19 by personal check. He issued me an invoice with account number **. I also thought that I also could get a cheaper control board online which I did. Also, I know I have the right not to purchase control board from them as long as the diagnosis was accurate since I paid for it. So I ordered a control board from ApplianceZone.com and also chatted with a technician named Kelly. Based on the symptoms I related to her, Kelly confidently said that the issue is not with the control board but the Control panel is the one that is faulty. Kellys diagnosis was different from Steves but since Steve has personally checked my machine, I decided to purchase a control board. When the board arrived on Octpber 25th, I immediately installed it as its easy to install since I followed simple instructions how to install it myself. But when I installed the new control board it manifested the same issue as the original part.. So I called Steve over the phone and he said the new control board.I purchased also faulty and that I have to replace it which I did. Then the second new control board arrived on November 8th and when I installed it, exactly same issue again manifested. That was then I suspected probably Steve misdiagnosed my Washing Machine. So I tried calling Depew the same day but wasnt able to reach Steve. Instead another guy named Kenneth answered the phone. He said that Steve has the right diagnosis but I insisted that I recalled Steve never showed me the washing machine working with his control board installed so Im doubting he got the correct diagnosis. Since it wasnt helping me at all, I decided to visit personally their store on November 8,th 2011 at 5933 Burnet Rd Austin TX, to request an audience with their manager. Then I met the manager named Michael ** who I believe is also the owner of the company. After introducing myself and explained the issue and told him that I wasnt satisfied with the service rendered by Steve because with two new control boards why is my machine still not working so I believe Steve got an incorrect diagnosis. I was a dissatisfied customer and I was hoping they would find a way to help me since I already paid them $81.19 but to my surprise, this Michael ** was so rude, his response was We have done our job, you are on your own now. We dont need your business. Good Bye I said Is this how you treat your customers? he answered me This is how I treat you.. I felt discriminated and insulted by his unprofessionalism. I couldnt imagine an owner of a business treating a customer like that. Before I left, I told him that I will report him to Whirlpool since they referred Depew to me and I would also report to the Texas Attorney General. He just said Go ahead and do what you want to do. We have nothing to do with you; I couldnt believe we have a business owner like this here in Austin TX. I really appreciate you helping me with this issue with Depew Appliance especially with this issue with their manager Michael Depew. I also demand refund of $81.19 for the diagnosis as they dont deserve to be paid and also they should pay me the cost of the control board $85.13. Lastly, I like to request that whatever license this company is holding must be reviewed as his dealing with me as customer is nothing short of discriminatory.

We purchased a Whirlpool Duet machine in September 2010. About a year ago, I started noticing tears and stains on clothing. Luckily, it was always on a washcloth or blanket, nothing special. Last week, it tore a 3-inch hole in my good jacket. I was not happy! My husband and I checked inside the drum and all around the seal. Neither of us found any rough edges. I thought if I called Whirlpool, they might have had a recall. They assured they had never heard of this problem. REALLY!!! Just look at all these e-mail complaints. Back to the old top loading - basic wash machine. Definitely not a Whirlpool!!!

I purchased the washer 1.5 years ago. At about 9 months, the latch was in need of replacing. The washer was locked and would not unlock. That was fixed. Fast forward to 1.5 years old and the control board needs replacing. The washer stopped in the midst of a cycle, filled with water. The repairs are over $400 -- nearly the price of a new washer. Ive never had a washer to go out on me. I willingly gave away my previous washer for the purchase of a newer model and did not expect this fiasco. I will recommend against purchasing a Whirlpool washer.

My husband and I remodeled our home and needed a new refrigerator... I wanted to try a Samsung, but after exhaustive research on my husbands part, he insisted we purchase a Whirlpool fridge... From the get go, I have regretted that decision. The main reason being the door on the L side of the fridge does not close completely. Sure, it alarms for a time, but what about all the times I close the door and leave the house. I have had to dispose of more groceries than I care to think about... Never again will I purchase anything by Whirlpool!

It has performed perfectly for the past eight or nine years. Only problem has been little plastic parts broke that held one big drawer that we may have overloaded. Door shelf plastic part holding it on... broke also.

Weve been in this house for almost 4 years so the dishwasher (Whirlpool WDT790SAYM) is no older than that, maybe even 2.5 since I think I got it home in my CX-5 which is 2.5 years old. Anyway, never really had a problem with it and we run ours maybe once a day or twice in a row every 3 days. Last night I remember running a load and this morning noticed the dishes were dirty but the inside of the tub looked clean. So I plop another pod in and tried to run it again and sat there and watched it. It filled up with water but then nothing. After 20 minutes I opened the door and steam came out so the heater element was working and there was water at the bottom. I tried various things but nothing. Canceling still works.So either I try to get this fixed, or buy a new one. This wasnt a cheap dishwasher either. My wife balked when I 1st bought it considering she thinks a $300 model is better than most of these $500+ models. Right now I cant argue with her since we just replaced an expensive Samsung washing machine that lasted maybe 5 years. Theres another review of this model on these forums and the person tried to get it repaired many times and it appears maybe the same thing is happening to us. I wont go down that road considering repairs like that exceed the cost of a new dishwasher.

I decided to buy the Cabrio. It was the most expensive, but I wanted to buy American, and I liked the set. It does not do great with cleaning the clothes and they smell when they come out of the washer. Do you have any suggestions. It does not fill with enough water even when using the deep water mode. Please help as I would not recommend this. I called Lowes where I bought it, and they said they knew, but are not recalling, or making any adjustments until Whirlpool does.

With the many selection to dry your clothes accordingly to your load, 9 times out of 10 all clothes are dry. Ive used every cycle there is too often so that I could get a better trusted value. Also it removes more lint than any other brand that I could think of.

I love my Whirlpool gas stove and oven. We opted for the convection feature as we are a family of 7 and often need multiple items in the oven. This was a very useful detail. I didnt know I needed that. I now cant go without!

Our new home came with brand new appliances. I love our Whirlpool microwave. Its reliable, quick & has lots of great pre-programmed features to assist with regular. The independent timer is a total bonus too.

We have had our catalytic oven explode into millions of hot pieces again for the 3rd time. Contacting them they sold me an extended warranty which Im trying to cancel and have been trying since 30th Mar to contact on ALL of their lines. It is permanently on hold or engaged. This company should be avoided at all costs. If you work for this disgusting company DONT!! You will be out of work soon! It is unbelievable how bad they are at responding to their (now ex) customers. What the hell are we in the EU for when a supposed UK co is Italian and they never respond (AKA 1940). Ludicrous! Incompetent! Stupid! Totally without comprehension. Do NOT buy ANY INDESIT or HOTPOINT products EVER!!! They are dangerous and you will NOT get any help to put them right.

We purchased our home in 5/09. Within a month, we had to replace the defective gas valve due to inefficient burning. Our house smelled like gas each time we used the oven. It was under warranty at that time so Whirlpool replaced it. It is now 5/12 and out of warranty. We called a local independent technician who informed us the oven wouldnt turn on due to another issue with the gas valve, the same one that had been replaced shortly after we moved in. He went to his local supplier to purchase the gas valve to be informed that they couldnt seem to keep this particular gas valve in stock, simply because its a reoccurring known issue and Whirlpool needed to do something about it. So, this technician encouraged me to call Whirlpool. I called the 1-800 number, spoke to 3 different people and was constantly informed that since it was out of warranty they would do absolutely nothing! Again, I was informed that this gas valve is a reoccurring known problem with Whirlpool so perhaps they should consider looking into this issue. The last person I spoke to was a bit snide and just kept saying It is past your warranty, we will do absolutely nothing to help you, and sorry you are having that problem. We are not aware of this reoccurring gas valve issue. Have a good day!” Whirlpool, do you understand your reputation is at risk when you dont want to stand behind your parts that should work after 3 years! Should a brand new part not work properly after a month? Should another service call have to be made after 3 years? Sounds like a quality issue, something Whirlpool needs to investigate especially after a local supplier states they sell this particular gas valve all the time due to a reoccurring issue.

I have the same pilot light problems as everybody else. I pulled the burner unit out, and cleaned, and blew everything out, and took a wire brush to the openings on the floor of the unit. I called customer service, and was asked about ventilation. I didnt mention that the heater still didnt work, even when the door to the tin water heater was removed, so venting is not the likely culprit. She authorized a repair that will likely do nothing from the comments I see.The real problem with their customer service, is the apparent stupidity of the computer system. She asked me for the model and ID number. I had to cut through the extra insulation blanked on the tank to get it. However, when I gave it to her, she then asked me if I was ** and if I live at **. If this information was already in the computer, why couldnt there be a search by my name and address, to get the model and serial number. Obviously, I had registered the water heater in the past. Isnt being able to get this information the reason to register in the first place?Now, I have to replace the extra insulation, all because of a stupid inability to create the necessary searches in their customer database. Yes, I could have written the numbers down, but why have the customer registration at all, if it isnt to be used for anything, other than data mining of the customer base.

In October 2009, I purchased a Whirlpool Energy smart gas water heater with flame lock safety system.$509.00 I had it installed on 5/4/2009 by Westmoreland Affordable Plumbing, $218.00. On 10/15 called Whirlpool stating that the upper thermistor was coding as a failure. They sent me another one to replace it on 10/19/2009. On 10/19/2009, 1 and 1/2 hours later, the tank was coding a bad gas valve, called back and told Whirlpool what had happened and that I smelled gas. I shut off the gas to the water heater and waited for a valve replacement to arrive. On 10/21/2009 I had E.H. Plumbing to install the new gas valve to the water heater, $150.00. On 10/28/2009 the new gas valve went bad. I contacted Whirlpool and argued with them until I had them replace the hot water tank. With their approval I went to Lowes and tried to get the same water tank but they no longer sold that model anymore. I was given their equivalent to the one I had purchased earlier. I had it installed on 10/29/2009, $150.00. I now see a class action suit was filed against Whirlpool for the model in 2008. They were still selling this model after the lawsuit???? I spent $1027.00 for a $509 hot water tank and a lot a days without any hot water. I have all my receipts and returned codes for this transaction. Is it possible to get my $300.00 back (for two extra installations) as a result of this problem? I also kept the old gas valve thermostat.

Two years ago, I bought two Whirlpool Water Heaters. Like the others who have posted, after one year the first one went out. Last night the second one went out. I just wish that I had read the prior reviews before I bought these replacement water heaters. I also had to navigate a very unfriendly customer experience, first with Whirlpool and then the manufacturer. After that I had to wait a week to get a repair person out only to have to order the part and then be asked to pay for it and the express shipping. Totally amazing! I have decided to buy new water heaters next quarter because I just cannot put up with either the aggravation or the expense of constant repairs. I will returning these two water heaters to Lowes, where they were purchased. Perhaps if enough of us return them, Lowes will decide its not worth damaging their brand to sell a known inferior product. When this many people complain about a product and they all have the same experience its a lack of quality, plain and simple. And I would think that Lowes would not want to go on supporting a known inferior product when even Whirlpool is lukewarm in their response to our complaints.

Hello. We bought this refrigerator from Costco, so we can have extended one year warranty for the appliance. When we need this then we are not getting help. Our Fridge is not working from last couple of weeks. Technician came a day late to see the fridge, then order the part on the 01/03/2017, I didnt hear back from service provider till 01/11/2017. Finally I got a callback after spend an hour on the phone saying that it will take one more week. I had to call Whirlpool to expedite service and because of weekend I have to wait another 4 days to get the part.There are 7 people living in my house including 2 yr old. We are having hard time with the food and waste of food. We probably throw away $200 worth of food. And spending money every single day on food. I have to buy every other day for my 2 yr old. Whenever I tried to call for compensation, I get transferred to different department. I am so tired with this kind of service. I would never buy any appliance from Costco or Never refer to anyone. Very very bad service.