We purchased this model in July of 2019 and have had nothing but problems with it since. The design is really bad - if you set the temperature on the ideal setting, everything on the top shelf freezes solid. If you reduce the setting to the one below ideal, your freezer doesnt get cold enough to keep ice cream hard. The ice cubes are a little more than half the size of our last Whirlpool refrigerator and the unit is noisy. Weve had Whirlpool out to work on it 4 or 5 times in the first 6 months and twice weve had to throw away food due to the unit not cycling on and off properly. One of the technicians told us he spends a lot of time working on this particular model - evidently, it has a lot of issues. We are now using our old garage refrigerator while we try to get Lowes to give us a refund on this piece of junk.

I purchased the refrigerator in Nov. 2013 and it stopped working completely on 3/22/14. I called Customer Service and they told me someone from Apple Appliance would be here on the 24th, it is now the 27th and still no repairman. I have contacted both Apple and Whirlpool everyday and have gotten no satisfaction at all. I just found out that I will have to wait until March 31st to have someone here. I have lost everything in the freezer and refrigerator and have no way to cool anything. I find this unacceptable but have no alternative but to wait until Whirlpool does something about it. I will never purchase any other appliance from them.

Purchased side-by-side model fridge, and within a month, the ice-maker froze up. Within a year, the relay switch failed, and caused the compressor to fail. What a lemon. Also, the clear bins in the door of the fridge side, have all cracked. Whirlpool says it is a cosmetic issue, but I think it is hazard and a material processing failure during their manufacturing process. They obviously would not cover any cosmetic issues under the warranty.I was one of the lucky ones, at this point, as the repairs were under warranty (expensive compressor, only by one week), had to buy an extended warranty to cover me in the future. I was only out the cost of extended warranty, and a fridge full of food. Lucky me. Customer service is worthless for any issues. I dont think Ill buy another Whirlpool product again. Buyers beware.

We purchased our Whirlpool Gold series, french door refrigerator 22 months ago. The freezer and ice maker has stopped working. We had one repairman come out already and he couldnt fix it. We have another one coming in 2 days. I am very disappointed with the Whirlpool brand. I also bought a microwave, 2 wall ovens, and a dishwasher at the same time. The microwave makes a clicking noise every time you use it.

We purchased a Cabrio top loading washer (WTW6400SW2) and a Cabrio dryer (WGD6200SW1) in 2007. From day one the washer has tied clothes in knots, never cleaned the clothes properly, and sputters the detergent and bleach unevenly. The fabric softener dispenser clogs up too, rendering it useless. The knotting of the clothes leaves them so tightly wrinkled they come out of the dryer very wrinkled. The water level, determined by the washers self-sensor that weighs each load, does not fully submerge the clothes. The manual says this is normal operation for this model and that it will not affect the cleaning process. Wrong. The small agitator is insufficient to clean the clothes but does a wonderful job of twisting them in long, tight knots. I want to kick myself every time I walk past the washer for paying so much money for such a poorly designed washer. I was very sick when they were first delivered and wasnt able to do much laundry. By the time I was well enough to do more with it, I noticed the clothes werent getting clean and were actually being damaged by the washers process thanks to uneven detergent distribution/spotting from the clothes sitting above the water level, and being poorly agitated and rinsed. Before I knew it, my warranty had expired. It was a very hectic year. Ive been very sick. We purchased it from Lowe’s. I had their techs out a time or two to check it in the beginning, but they always smoothed it over with some waffy, generic explanation. Eventually, I was past my 30-day trial period. I was on my own with Whirlpool, whod refer me to the manual and make me feel like I just had to get used to the new technology of the self-sensoring washer. Ive read that Whirlpool is aware of this issue and doing nothing. Ive read other complaints that describe the same problems I have and its obvious this is a design flaw. I appreciate these posts because I least I dont feel like Im insane anymore. No, just horribly ripped off by Whirlpool.

This started Sept 27 2017 when the ordered online electric range 30 inch slide in oven Whirlpool brand was delivered. When using the oven, a noxious diesel smell filled my home, despite multiple attempts to burn in the unit as advised. 10 days later after still trying to burn it in fumes got worse. I called corp who then sent over a tech to look at it and the tech shared with me when he arrived that he was the wrong person since he cant smell due to an old injury! He admitted he smelled a chemical when it first went on but it went away for him but might have went away due to is impaired smelling ability. I called Corp back and they totally agreed something was wrong with it that could not be repaired and the unit should be picked up and I should be paid back that day it is picked up. They said in a few days which later turned in 2-3 weeks out and counting... I filed a complaint with the BBB due to the ongoing issues. Corp office said they would pick up unit and at that time hand deliver me my refund in full. At first the pick up was weeks out but after BBB was notified they came yesterday 10/18/17 and removed unit, but no check! I called Corp again this time asking why I did not get my money as they promised she said someone dropped the ball, and that someone should have told me that since they had to get someone non-local to get it that they will mail me the check in 14-21 days! She said I see in the notes. They told you they would hand deliver you your refund so they should have called you about the change.So here I sit... No oven in use since Sept 18 and no money back to buy one for weeks yet. I have never been told, despite my requests as to what the chemical was that I was burning off in my home and exposed my family to over 10 days which we had headaches and nausea from (despite windows opened and fans going at full blast). Only that it might have come from the manufacturer or process. This company isnt the only one who has had issues on occasion with a defect in this never-ending chemical smell but the lack of regard of my safety concerns and failure to stand up to what they offered to do (poorly handled response) is simply wrong and bad business. I have not dealt with Whirlpool regarding matters ever and have very little of their products in my home so unsure if this is unique or standard with them. I wont buy their products anymore because I am less than very dissatisfied with my experience. I may have been the only unlucky person having this kind of response from this company but felt the need to share.

I purchased the model WDF530PAYM0 serial: F14106104 dishwasher. The foremost reason I purchased this was it had nylon racks. I have discovered that the racks are rusting! It is rusting on the ends where nothing can touch it. I am very disappointed that it is advertised having nylon racks and now it is rusting and deteriorating. This dishwasher states racks-nylon, not racks-nylon coated. I just took some pictures of the racks. I decided to look underneath the top rack where the upper spray arm is located. Now I am plain sick! Most of the underneath is rusting. This dishwasher was purchased and installed 2 years ago. I paid $600 and you would assume that something mechanical would quit after years of use on an average of 1 to 2 times per weeks. Not this one...rusting racks and hard telling what damage the rust flaking off during running is causing to the mechanical components. Lesson learned: Their definition of nylon and nylon coated has no difference.....I very much disagree!

Got a simple error code E6 F2 on the display of my oven (only 8 years old). Called Whirlpool to schedule a repair. They told me there were no available dates for one of their techs to fix my unit. They referred me to 3 outside companies that wanted to charge me over $100 just to come out and take a look. One of the phone numbers to the companies they referred me to was a wrong number. I asked them to tell me what the error code means and they said they couldnt tell me with any degree of accuracy. (What use is an error code, then??!!) I checked all over the internet and different websites say it might be a control board (over $300 for the part) issue. But several techs also said that it is a crap shoot and could also be a Temperature Sensor. I called back Whirlpool to see if they could get me a deal on the part. But, guess what? They dont sell it anymore...in fact they dont even sell their own parts at all!! And, they transferred me to some outside company that refused to even give me part numbers, to avoid me shopping for a better deal (which I did end up finding on Amazon after number 6 below). I called back Whirlpool and after getting transferred around to 2-3 different people and wasting about an hour I finally got someone who finally wanted to just give me whatever decent service they could and they finally got me the part numbers of the 2 different control boards (Main Control Unit and Sister board that controls the locking mechanism, $367 and $140 respectively). Now I am faced with paying an Appliance Repair person over $500 for what seems to me is a BIG FAT LEMON of an appliance due to the sheer number of unsatisfied people that are having the same issue, have had it fixed, and had the error just return again. THUS.... WHIRLPOOL AND THEIR CUSTOMER SERVICE AND THEIR PRODUCTS JUST SUCK!! AND I WOULD NOT RECOMMEND THEM TO ANYONE! THE LEAST THEIR COMPANY COULD DO IS TRY TO HELP FIX THE PROBLEM, NOT EXACERBATE IT BY GIVING SHADY CUSTOMER SERVICE AND REFUSING TO HELP FIX THE PROBLEM!!!

We too have nothing but problems with our supposedly top of the line convection/microwave oven. Purchased in 2010 in February for new kitchen. From start, original microwave installed did not work, would not cook or heat. Dealer replaced. One year later, same problem, but now out of warranty. Had to pay labor, costs, and parts to get fixed. Fast forward 13 months, again magnetron needs replaced, microwave will not work. What a hunk of junk for our money. I will never buy any Whirlpool appliances again, and I will tell everyone I know the same. When you call customer service, they are nice but only say “too bad, out of warranty”. What a joke for a major appliance company to tell customers. It is obvious that this microwave is faulty from the get go, and they just keep on making them the same way and not trying to fix the problem.

I will be brief. Bought Whirlpool ref. model #WRF560Smywo4 on April 15, 2016. The refrigerator quit work July 29, 2016. Called Whirlpool. They responded they had no repairman in our area. After several calls they scheduled a repairman. He came and put on a part. It did not work. Called Whirlpool again. They sent the same repairman. He stated it needed a new compressor. A week later he arrived with the part (August 12, 2016). As of now the refrigerator is working. Now this was two (2) weeks without a refrigerator. This has been a bad experience. I WILL NEVER BUY ANOTHER WHIRLPOOL APPLIANCE AND RECOMMEND THAT YOU DO NOT PURCHASE ONE.

Greetings: I purchased a Whirlpool refrigerator on July 3, 2014. And the supports for the door to open and closed have grinded and worn out - not allowing the door to close properly, requiring being lifted up, and pushed close as much as possible. Not the quality I expected with the purchase of a Whirlpool product. I want this door repaired or replaced at the expense of Whirlpool. Having paid over $600.00 for the product, I didnt expect no problems like this at all, poor design. The weight of the door is too heavy to support a hinge mount in plastic, its ridiculous. Now cooling is being wasted, runs constantly, and just not the quality I expected nor received.

I have recently bought a Whirlpool Cabrio washer/dryer combo and I wish I had read your reviews before doing so. I spend quite an amount of time washing, re washing, rinsing dark clothes to end up washing them by hand as the washer leaves unsightly white streaks on them. I have tried switching from hot water to cold, using very little detergent, buying clear detergent, then organic detergent, extra rinsing, etc. to no avail. Very frustrated and disappointed. I would gladly join any class action to stop Whirlpool selling these useless but expensive washers.

I purchased a Whirlpool refrigerator from Gerhard’s Appliance, Glenside, PA on 12/15/2011.There have been problems with the unit since it was delivered on 12/19/2011. The doors were not the same height. There were stains (which looked like rust) on both doors. A shelf on the door and one in the fridge were missing. One of the deliverymen adjusted the door height then, and the door has been creaking on opening/closing since. That door has been replaced, but the problem continues. The freezer (which has an icemaker/water dispenser built in) started to produce ice on the inside of the unit door and on the wall surfaces. Attempts made to rectify the problem were unsuccessful. A new freezer door was ordered. After the door replacement, the frost problem got worse. I can fax you a copy of all service contacts so far (at least 7). Please help me replace this lemon.

I bought my Whirlpool Duet set with pedestal in February 2008. I just had a tech here to figure out why my machine is so loud during agitation and that I cant hear anything else. He said its the drum hitting something. I never overload my machine - just normal use for 4 years. It costs more to repair the machine than to buy a new one. Now, after seeing this information, Im not the only one who has this problem with my Whirlpool washer. I am disappointed that there isnt anything else the Whirlpool company tech can do for me - just a receipt that shows the parts alone cost $600.00. Now, I have to pay about $50.00 just to get rid of what from the outside looks like a perfectly good machine.

The interior has an excellent layout and accommodates our oversized dishes. The racks operate with ease. The outside appearance is tastefully done and the noise level when in operation is very low compared to other brands we have owned. We are pleased with the overall operation of this unit and would recommend it to others.

In 2007 our Whirlpool 30 gallon gas water heater began to have issues. Serial number 0425126675, Model Number FG1F3030T3NOV. The pilot light kept going out and would not stay lit.. After several times with replacement parts being sent with the same thing happening, finally in 2010 they replaced the water heater. A new water heater was professionally put in, serial number 1023T412357 Model number BFG1F3030T3noHV.I am having the exact same issue and I was told that the warranty was null and void on the new water heater because it was a replacement. They replaced a defective water heater with a defective water heater. I called the number given to me by Lowes 1/877/817/6750. I spoke with Nichole. I told her that I should not have to pay for replacement parts for a defective water heater. I told her that I was never informed that there would not be a warranty. I live on a fixed income and cannot afford to buy another water heater because I was given a defective water heater in replacement for a defective water heater. I became angry stating, Thanks for nothing and I hung up. So many people have the same problem with these water heaters that something MUST be done.

Whirlpool dishwasher failed after 16 months. It leaks continuously. they sent a service provider 5 days later out to fix it, then said there would be a $129 fee for coming (this was never mentioned at time of appointment), and the total repair cost would be $208. I wasted a day waiting for repair person to come, I declined the repair due to the cost. I called customer service later, during office hours, and I received the poorest level of customer service I have ever experienced. Whirlpool will no longer receive support from the our family. This machine cost over $500, and a ruined rug. Whirlpool wasted our time, and a day from work. We will never purchase Whirlpool appliances moving forward, due to this product and customer service experience.

Purchased a Whirlpool hot water tank from Lowes 5/12 and have had NOTHING but problems with it since day 2. The tank I replaced was around 20 years old, never a drip, never a problem, it just finally rusted through.. Well this piece of JUNK I had installed is just that JUNK.. I have been in contact with this company many times, they ALWAYS have a new story. I replaced my old thermal expansion tank 3 months after buying this JUNK because I was told it could be that. Well that didnt fix anything and cost me $60.00, then it was pressure relief valve, ok, another $20.00, nope not that. Well back on the phone and emailing this company, now they tell me I am not vented correctly, because with all the repairs being done on this tank, my Son noticed the top plastic pieces melting. Well back on the phone I go, and of course Whirlpool tells me, its me again.. Had piles going into my chimney replaced, no help, replaced thermal expansion tank again, no help, replaced pressure relief valve, no help. So sick of cleaning up water I want to throw up. Well I now know why they say, do not return to store where you purchased it, because it is bad business to have Lowes parking lot, looking like a Whirlpool graveyard for their product. .

I purchased GMH6185XVS microwave in Dec. 2011. It was installed in January 2012. This was for a remodel kitchen with all Whirlpool appliances. In August 2014, we discovered the micro would not heat. I called Whirlpool as directed by Sears. I am told I have to call a repair service and pay for it. I have a 14 year old Whirlpool in my home. We have never had a problem with it. I had a Whirlpool micro in my previous home; never a problem. This is a second home that we hardly ever use. We are two adults. My daughter had the same problem with the same microwave. I am very upset with Sears as well as Whirlpool. Even if I used this machine everyday, it should not break in 2.5 years. Shame on both Whirlpool and Sears. I will never purchase another Whirlpool product again. I will be telling everyone I know.

My company purchased a lot of products in Whirlpool company. We thought the product is good, until the dryer machine didnt work all of a sudden. We call a customer service. After a week the maintenance came in our unit to check the dryer but he said that they need to purchase the other part of the dryer. That was happened last july. Were keep calling the customer service. We cant even count how many times we call them. But unfortunately even them they cant give us an exact date when they can fix the dryer machine. SLOW RESPONSE FROM WHIRLPOOL COMPANY!!! Shame on you guys.

I bought an whirlpool stove from conn store in 2007. The oven hasnt work right since day one. They send different people out to service it - still dont work the right. We smell gas when we try to light it. It wont come on 90 percent of the time, sometime we have wait a while to start it. They refuse to exchange from day one, we cant afford to throw our money away so we do more top cooking than bottom.

We have owned refrigerators for over 40 years. Never had one as bad as this. Three ice maker replacements lasting maybe from 6 months to 2 years. Cap that off with customer service people who by voice and tone could not give a rats ** about helping the customer. Today it took me from 3:10 pm to 5:30 pm to get a real person on the phone. When I did the attitude is so reminiscent of a fast food hamburger joint with arches. Yes they know the refrig and ice maker are and have been a problem but they don’t care cause we have no option. Whirlpool will NEVER SEE ANOTHER penny of my money. Time to look at real appliance makers. Horrible.

I purchased the Whirlpool Cabrio Washer thinking I was purchasing a quality product. Unfortunately it was one of the worst decision my wife and I have made. The bearings (lower) only last about 2 years. We purchased the extended warranty and the first time it was covered. The second set were not covered and now we will have to change them again. We will not ever purchase another Whirlpool product. I contacted them several times with no positive results. I still saved the last worn out bearings to show the CEO. The engineers do not have a very good idea to make the lower bearing last. Where I purchased the machine they told me after the first change that it would happen again and they were correct. If anyone needs to contact me about this product feel free. NEVER EVER BUY A WHIRLPOOL PRODUCT.

I am somewhat satisfied with my induction range. We ordered it just before Thanksgiving from Lowe’s a year and a half ago. We were told that we would have it before Christmas, which was fine with me. I don’t cook for Thanksgiving. Just a lot of Christmas baking. It turned out that Whirlpool had not started making our range until January and it wasn’t delivered until mid-January. It had been really good until about a month ago, when it blew the circuit breaker. My husband was cooking dinner while I was at work and it just blew the circuit breaker. No power surge in the rest of the house. No other circuit breakers affected. When the power was turned back on, two burners were out. As it turns out, the main circuit board is dead. So now the one large burner, a small burner and the ovens don’t work. There are two circuit boards for each oven. When it is working, it is a great stove. However when it doesn’t work, it is costly and takes a while to get repaired.

Purchased Whirlpool Cabrio model WTW6400SW washer and dryer 1/7/2007. The matching dryer was dead on arrival and the second dryer motor died within a year. Washer: 1year 2 month the washer motor died. Whirlpool paid for the part and I paid the labor. The following year, the bearing went out and the outer tub was replaced (the bearing is inside the plastic outer tub - bad design. Whirlpool paid for the part and I paid the labor. Feb. 2011 had one of the F errors. Whirlpool repair tech came out as the tub would not drain and it was a wire that had come loose underneath washer - another service call charge. Dec. 20, 2011, I had an error F50. The Whirlpool repair tech came out, verified no clothes or money stuck in the machine. All clear. He called higher level whirlpool tech and they paid parts and labor to replace the main control board and the RPS Sensor. Im single and am not abusing this machine. Like everyone else who posted. I paid close to $1,000 for this washer (not including the dryer) and I have been a faithful Whirlpool customer for 3 generations, but if Whirlpool doesnt offer some kind of compensation/trade in credit to customers who purchased this (knowing that the design is bad/faulty) washer and discontinue this model. This will be my last Whirlpool. I will have lost all faith in Whirlpool. The Whirlpool service tech that I found is op notch. I will miss him if I have to switch brands. Im putting 1 star as I know this machine will not be operational for 9 years which is the minimum that I would expect. If it makes it to 6 years without another service call, it will be a miracle.

I dont know the model you have but this exactly what I just had happen in May. Its what they call the jazz board that is behind the light area inside the front of the refrigerator, where the light bulb goes. This is a circuit board and it seems when connection arent happening properly the fridge wont go into defrost mode and the water freezes over the evaporator not allowing any cold air to the top but working cooling freezer and making lots of frost too. I paid $400 to Sears service repair. The jazz board itself, I kept the old one and you can buy it online for about $100 and a child can do the labor that I paid hundreds for because, like you, I didnt know what the problem was. It takes less than 1 min to do this. I was furious! I hope this helps you and I too will never buy a Whirlpool. I found this site looking for why the refrigerator is making very loud noises, very loud banging, clicking, humming. Its ridiculous!

I bought what I thought was a great washing machine. It is a top loading Cabrio from Whirlpool. The machine leaves white residue on all my dark clothing. It is a disaster. I am following washing instructions exactly, using HE detergent, loading the right amount, I even tried using PODS. I tried different temperature water, different cycles of washing and spinning and the same thing happens. I had an old Maytag that broke that cleaned beautifully. This thing is a piece of garbage and I would love to send it back if they would let me. DO NOT BUY IT. I AM BEGGING YOU, YOU WILL BE VERY UPSET.

I am writing this complaint because of the very poor service of Whirlpool. My washing machine broke after 1 year of use. Luckily, I was on my 2-year insurance. The wiring fully collapsed and I needed to change the whole drum. I called Whirlpools customer service and they said that they would fix the problem after 2 weeks. They came on the day and found out the problem and ordered a new drum. They said they would fix it up on the 5th of December, and it has already been over 3 weeks. On the 4th of December, Whirlpool called me and said that the item they had ordered for me has been damaged. I am not satisfied by these products because it is only a drum (it cant break that easily). I cannot recommend this company to my friends and family due to the quality of the products and the poor customer service as I was waiting on the phone for almost an hour trying to get through.

I bought Whirlpool Proton 3-door 18 months ago from a popular store at Chennai. I got a problem with cooling within 2 months. Service was availed and it got better. Same problem occurred again after 3 months of service, so I had it serviced again. Now the problem is its not working at intervals. I called the service and the person could not find any issues and says its working well. While it was pending resolution, the problem recurred and refrigeration is nil now. At the freezer, even after 8 hours, the water has not turned into ice and all food products have perished.

We bought a duet washer and dryer about 3 1/2 years ago. In that time, we had many error codes that we had to research online and fix. We have replaced many things to date. However, this last code,F70, has really been the last straw. Basically you are better off buying a new washer and staying away from Whirlpool. We had a company tech come and diagnose the washer. This code says that its the interface board. The company has replace this board 3 times and the code is still coming up. They have basically replaced everything in our washer and the code remains the same. Nothing is fixing it. They have had Whirlpool-certified employees come in to look at the washer and are unable to fix it as well. They have been trying to fix it for 2 months. I called Whirlpool corporate office and they informed me that the company that we went with is not Whirlpool-certified, therefore the only thing they will do is either give us 15 % of our money back if we were to by a new washer, or we can have a certified dealer come out and diagnose it again. Well, that is just a waste of time. We already know whats wrong with it and would have to pay again to have it diagnosed or we totally loose a lot of money. I feel that Whirlpool really should stand behind their products, considering the price tags they have on them. They should last much longer than 3 1/2 years. I will not by another Whirlpool product again. Apparently, Whirlpool doesnt seem to care about loosing customers. I dont feel that they deserve any stars but it doesnt allow to pick a negative number.

We purchased the model WFC7500VW, 24” washer and accompanying dryer in June of 2015. Within a couple of months, the water pump went; also we continually had to take the front panel off and clean out the filter when we get an A11 code! Now we experienced an F06 code... This code means the washer can’t go into high speed. The repairman (Whirlpool recommended), told us that a new tachometer motor, etc would run $500-$800 with labor! He also said that the noise the drum made was bad. My dryer works fine (only complaint is the grinding noise it makes, which Whirlpool told me is normal)... I would like to purchase a new washer, but don’t know what will fit under the dryer. I do not want ANY Whirlpool product!

We called to have refrigerator repaired. We had to wait for 6 weeks get repair people to come. They looked, made guess, left, no repair. Said someone else would have to do it. No date/time frame. Houlka appliance, is that the only repair place in ms? No happy/hate lowes appliances, not impressed with whirlpool warranty system. And yes I have all the original receipts for the warranty.

We purchased a Whirlpool Water Heater at Lowes - model no. FG15040T3NOV, serial no. 0434120861, product no. 0730267 & weve still been having issues keeping the pilot light lit. We purchased the bottom unit piece that Whirlpool said would fix the problem but weve still been having problems with the pilot light going out. The water heater isnt under warranty anymore, so last night was the last straw & we finally decided to get another water heater that wasnt a Whirlpool. Ive done a research on the internet and found out that a lot of consumers are still having this problem to this day.

I had purchased this washer from Lowes last September and had problems almost immediately. First of all the lid would lock and hold my clothes hostage till it decided to reopen which could be days. Finally it never opened again. Called customer service and sent someone out. It took almost a month to get it back to running. 1 week for him to show up then 2 more weeks for the part to come in 1 more week for him to grace me with his presence again. Had to call again because the mother board then went. Another month. Now just out of warranty I go to wash and its dead. No lights on nothing. This machine is the biggest pile of garbage and waste of money I ever spent. Barely made it 1 year.

Our 3 1/2 year old dishwasher is falling apart. First the left slider broke on the top rack. We ordered a replacement part ($74) and when ready to install, discovered the right rack was also falling apart. At that same moment, the rollers fell off the bottom rack! It seems the plastic parts cannot tolerate the heat in this dishwasher (just a guess). We’ve returned the new replacement part and are shopping for a new dishwasher. It will not be anything from the Whirlpool line!

We bought a Whirlpool refrigerator/freezer from Lowes 4 years and 11 months ago. It apparently sprang a freon leak somewhere... repair person cannot tell until they take it into their workshop which will cost $300 - 400 just to find! And then there is a strong possibility that the compressor is toast. I called the company and they were not willing to help out at all. Why should a refrigerator only last 5 years (technically less)? I am not buying another Whirlpool and am looking for refrigerators that have a longer warranty on their compressors - LG which has 10 years! Whirlpool cant do that????

Bought this dishwasher (Model No WDF530PAYB3) in 2013. First the plastic latch for the dishwasher detergent door broke. Then, the paint on the face of the door started to bubble, peel, and now is rusting. Next, the heating element broke. Lastly, it started leaked on my wood floor causing damage. 2013-2014 I bought that Dishwasher, Micro-Hood, Stove, Refrigerator, Washer, and Dryer all Whirlpool. All the kitchen appliances were Whirlpool Gold. They would not fix their product. Offered a discount on a new one as if I will ever buy Whirlpool again.

We bought this fridge about 5 years ago, it was the exact same model as one we bought in 2003 but everything had changed, the plastic for the drawers was a fraction of the thickness in the older model and it breaks and cracks with the slightest bump like setting the lettuce in, the frame of the door is full of cracks and the fridge keeps leaking then freezing and making puddles on the floor. The little plastic tabs for the ice dispenser broke. It is absolute garbage. The one we bought in 2003 was great clearly the company has NO integrity or desire to make a decent product. I wont be buying anything Whirlpool EVER again.

May 4 I ordered a washer and it was to be delivered on the 21st and on the 20th a salesperson calls me to say my ordered washer is out of stock and she gives me a substitution washer that wont ship to me until june 20th a month away even though I already had been waiting a month, I was very upset and said, I wont accept it but let me think about it, I thought there must not be anything sooner (BIG MISTAKE). So I called back and accepted but after getting off the phone looked online and found a washer that would be delivered on May 28th and it was just delivered no problem but now no one at WHIRLPOOL can find the subbed order to cancel and give me my refund from the out of stock washer... So I have paid for 2 washers and every time I try to get help I have an hour wait to get a person. I am a 65 yr old woman who has been put thru so much stress and it is not good for my health. All I want to do is cry.

I purchased a refrigerator from this company Model #WRF989DAM. It worked for only 14 months. I had service people come 4 times to try and fix it, called customer service and was suppose to get a replacement, paid $300.00 for a different model, been 49 days and still have no refrigerator in my home. Had to go out and buy my own replacement. I have called and sent emails with no response of when I would be getting the replacement.

Weve had our Whirlpool Cabrio washing machine for about 3 1/2 to 4 years. At first, it left our clothes wrinkled, so I purchased a steamer to help remove the wrinkles. After a few months, it started making a terrible clanging noise. My husband was able to repair and it ran okay for a while. Over a few months, it got louder and louder. It does not get our clothes completely clean. Some even come out dry on one side. Now, we are getting an F50 code and it shuts down after 1 minute. After reading the reviews, I agree Cabrio is a bad product. What happened to the trustworthy, best value Whirlpool name?

My Whirlpool side-by-side refrigerator is just 4 years old. When they delivered it, they noticed damage on the bottom which required them to bring me a new refrigerator. The new one had issues with the ice maker that required multiple service calls to fix. The refrigerator door always seemed a bit misaligned as it was a bit lower than the freezer door, but it closed, so I never complained. I was just tired of all the issues! During the last six months, the door started to remain ajar instead of closing completely so that we had to always be sure to apply sufficient pressure to close it tightly. I considered calling in a repair, but it was still closing so I thought I might be overly critical. As it got worse, I realized the door was defective, but one day, it just fell off completely without warning as though the hinges were made of butter!After multiple service calls, a tech reattached the door, but I could see that it would not hold and sure enough, it is starting to remain ajar again. I have contacted the warranty company who is now saying the service tech claimed we were hanging on the door. This repair company the warranty company uses has an F rating with the BBB. Now, Im being told it may take a couple weeks to get another repair company to give them an opinion, but the issue is clear, the door was defective and it looks like they found a way to avoid having to make good on the warranty!

My Whirlpool dishwasher is used 2-3 times per week. The interior has more than adequate space for a full load of pots, plates and utensils. A normal cycle is used and the washer is essentially very quiet. Dishes/glassware always come out spotless and squeaky clean.

Our long and tortuous experience began in 2013 and continues to this day. But Ill just give the headlines. In August 2013 we bought Whirlpool BTM French Door KFIS20XVMS11 from Lowes. Three years later we learned that model number appeared on the attached recall notice which had been issued just days before our unit was delivered in September. Neither Lowes nor Whirlpool notified us of this recall which described a simple repair to a part that was leaking so slowly that its effects took three years to show up in a destroyed floor and cabinet enclosure that will cost $2981 (and still rising) to repair.We called AIG, the company behind the extended warranty provider, and they responded promptly by dispatching a Whirlpool factory authorized service technician who attempted unsuccessfully to drag the unit from its alcove over the warped, erupted floor beneath. With the refrigerator half-way out of its enclosure, the technician stopped and asked us to sign a waiver of liability. When we refused, he announced that the problem was water damage and he jammed the unit back into place, leaving dents in both doors and the freezer drawer below.We went to Lowes, who strung us along for several months before sending an engineer whose report concluded that the problem was a manufacturers defect (The Lowes engineer and his associate damaged the unit further when they forced it back into place over a floor made more uneven when they removed the pieces of rotted oak shown in the accompanying photo.). Based upon the engineers report, which Lowes said it had no duty to share, we were given a 1-800 number for Whirlpool customer service, with assurance that we would be taken care of. Although we had to start from cold without the engineers report, Whirlpool customer service was initially very accommodating and gave us hope. For a moment, I thought we were going to get resolution. They assigned a case number and we supplied the requested documentation. That was on a Friday in March, 2017.Monday we were surprised to receive a sternly worded notice from the Whirlpool Law Department that a clerk there would be taking over our case. We realized that we were far from resolution. Why did the Law Department intervene? We dont know. We guess it may be because they want to avoid a class action lawsuit on behalf of possibly thousands of leaky refrigerator owners (Whirlpool, KitchenAid, Maytag, Jenn-Air and Amana units were all among the affected). In any case, since January we have been monkey-in-the middle among Whirlpools various departments, Lowes various departments and AIG, with no progress. What do we want? We just want things back the way they were before our leaky refrigerator did its damage and before Lowes and Whirlpool demolished our good as new looking KitchenAid refrigerator in the process of telling us they wont fix it.Footnote: We purchased all new KitchenAid Architect series appliances in August/September 2013, including top of line cooktop, dishwasher, convection microwave, convection oven and a French door cabinet depth refrigerator. Every unit except the cooktop has required warranty service, including five expensive electronic parts replacements. Fortunately we bought extended warranty service from KitchenAid/AIG, who have been terrific to deal with on the parts replacements. I dont recommend Whirlpool appliances but if you are intent on buying them, I do highly recommend extended warranties. As for the value of Whirlpools manufacturers warranty, watch this space. Ill be back with the final resolution.

1st item - ice pooling at bottom of freezer, now repaired at a cost of $100. 2nd item - 1 day later fridge/freezer keeps shutting off and on irregularly. Cant contact anyone one from Whirlpool on a weekend and Trail Appliances doesnt have anyone available to come and look at it and if they did it would cost us another $100+ with no guarantee and we were told by Trail the Whirlpool will not touch it if someone else does. From what I have read seems we now a victim of Whirlpool. P.s. for those who dont know yet Whirlpool not only now owns Bastemp, they also are the makers of Kenmore and those fridges have experience the same ice issues.

I am experiencing problems with keeping my pilot lit too. I checked the screen and this is not the issue. I have just returned from Lowes where I purchased the water heater and they informed me Whirlpool supplied kits for this issue and it was widespread. They mentioned a class action and went on to tell me they and all surrounding Lowes stores are out of the free kit and arent expecting anymore. Am I to feel lucky my water heater water didnt fail sooner only to feel unlucky all of the free repair kits are now gone? Lowes provided me with the Whirlpool phone number for help and they have just informed me it will cost me $35.44 plus shipping. I now see how widespread this problem is. This isnt right. I am very disappointed in the handling of this known problem! What is my next course of action?

I have a Whirlpool oven and dishwasher and have had nothing but problems with them both since day one! Our oven went out Christmas and couldnt get service on it and we were entertaining for Christmas. DONT EVER BUY A WHIRLPOOL PRODUCT!!! If you do you have no one to blame but yourself.

I took a load out of my Cabrio washer and put it directly into the dryer. They had been on high spin. Now they are on medium heat. The clothes seem warm whenever I open the dryer to see if they are dry. They are warm... but not dry. There are no towels or jeans in the load either. T-shirts, underwear, etc. Ridiculous! The last load was jeans. Also 3 hours, but I thought maybe I had it on the wrong cycle. Now I think its the machine, not me.

I purchased a Whirlpool oven and stove from hhgregg. The refrigerator is at best OK. The stovetop is easily scratched and looks horrendous after just a few months. Cooking controls are far too high for slow cooking. Customer service is terrible. Avoid, purchase another brand. You will be much more satisfied.

My old 25 yr old Whirlpool died and was shopping for a new one. I saw the Cabrio and was really impressed by the features and large capacity interior. I can say that I thought my clothes were getting clean until I looked closely. I have never been so disappointed with this washer. I wish I had my old one back! Clothes arent clean, they are so twisted when I take them out and theres a horrible smell, like oil burning when it runs. The machine would fill up and when it would start to wash, it wouldnt, it would stop. And a loud humming noise was coming from the back.I shut it off and turned it back on and it wouldnt clear. I had to unplug it and plug it back in to clear it and start over. The bearings are gone now and I was going to have a repairman come and look at it, but now I wont bother! After reading everyones comments this Cabrio is a piece of junk and Im sorry I ever bought it! So now Ill be shopping for a new one tomorrow with an agitator!!! Im not impressed with the HE appliances!!! Ive owned this POS for not quite 6 yrs. Expensive to purchase and I will not recommend Whirlpool to anyone! Its sad that companies today make cheap products!! Built to last... ha!! Well never see those again!!

My wife and I purchased this Cabrio washer 6 years ago when we got our new home. I have replaced the discharge pump 2 times, and approximately 2 months ago, we developed a noise so loud it was like a jet engine landing. I called our appliance store and paid $100 for an estimate, only to find out it will cost $973.00 to fix it. When we bought this, I was told it will be the last washer we will ever need. Ill never use Whirlpool again and recommend no one else does, either. I wrote to your customer chat line and basically the reply was Sorry about your luck. I know Im not the only one with this issue.

I bought a washer dryer Cabrio set and the washer after 2 years has a bearing failure and is squealing badly. The service technician quoted $400.00 to fix a washer that cost me $800.00 new and is 2 years old. I had a Whirlpool washer and dryer set for 11 years with minimal issues and that is why I bought Whirlpool again. This will be the last time. It is a matter of time before the washer fails and I will have to purchase new or pay the service technician.

WRX735SDBM02 - I purchase this new WP refrigerator on 7/9/16 from Home Depot. It has been repaired twice already and now the front control panel is chipping and peeling away. Whirlpool says this is cosmetic. I maintain that quality construction and material do NOT simply disintegrate spontaneously. I want the control panel fixed under warranty for manufacturing defects. This NEW refrigerator cannot stay in my home looking like this, it is unacceptable to me. Their customer service refuses to do anything. This was somewhat hard to photograph due to the reflection issue.

We bought an oven built in from IKEA - Whirlpool. It didnt work from the beginning. We called for a technician, who comes in the next day, took the defective part and ordered a new one. Took two weeks to arrive. Now I just found out that I will have to wait another week for somebody to come and install the replaced part. I am very disappointed with their way to serve me as a client. I explained to them that itd be nice if the technician it will come at the first hour in the morning ex. 9 am so I can go back to work after that. Which is not possible. The tech is more important than you as a customer. The technician will give you a 2 hours windows to arrive and after that who knows how long it will take the repair. So far I have this build-in-oven in the kitchen just for design, is not useful I doubt that it will be working soon. The lady who called me from Whirlpool Canada was giving me theyre the option in the manner or take or leave it.To be honest, I regret buying this oven, so far I havent used. Wasted my time trying to get them to be more efficient, but got the message from them that I dont matter. Never been treated so wrong by somebody who is working in customer service. The first call it was coming from a company which is located in Maple Ridge, BC phone number 604-466-5597 and when I insisted on having the repair being done asap they hung up on me. I asked for supervisor or a manager, and they told me they are not allowed to give any of those on the phone... Buying this oven was a mistake, trying to deal with them another mistake. I dont recommend to anybody this oven or dealing with Whirlpool Canada.

French Door model WRF989SEAE01 - Fridge runs very loud after 3 weeks. Ice build up inside of fridge - back left. After numerous repairs, dealer replaced unit with new. Three weeks, loud noise again. After 7 months, the ice maker has quit, the freezer is thawing items, the fridge part is not cold enough (all settings have been boosted). Now Im concerned it is going to completely fail or burn our new house down. All new Whirlpool appliances in new home and this thing is proving to be extremely unreliable. Dealer is now out of loop (gave up) and told us to deal directly with Whirlpool. After 2 units and same issues, it has to be a design flaw.Can anyone start to move on a class action lawsuit or do I wait until it blows up or burns down the house? We are of retirement age, no kids, and our appliances have had NO ABUSE. Another acquaintance has same fridge about 2 years old and it has completely quit.

I have had nothing but Whirlpool for 40+ years, I am on my 2nd washer and 2nd dryer! They do the job I need, they are very reliable. If I had any downside it would be they don’t hold a queen size comforter.

We purchased a Whirlpool Cabrio washing machine on 3-18-16. In February of 2017 the washer died. I was bleaching my whites at the time so most of the clothes, whites fell apart because they sat in bleach and water for 2 days. I had to figure out how to get them out without getting bleach and water all over my clothes. I called whirlpool and they got someone to come fix it. The tech came and said we needed a new control panel. We waited 3 weeks for the panel. He came on 3-24-17. He put the part in. Took less than 10 min and said, All set. I went downstairs and put a few things in. I was a bit leery and the machine started. I went back upstairs and I hear beeping. I go back down and the machine is flashing again. I called the repair people they said, Unplug it for 10 min. It may reset itself. If it doesnt, call back. It didnt. I called back and wanted me to wait till the following week. I told her I had clothes in there.Someone came the next morning and said it needed a harness and they would order it. Well its the 28th and I havent heard anything. I have called whirlpool several times with no satisfaction. We had the machine less than a year and its been dead for 2 months. I am disabled. I have multiple sclerosis so every day is a new issue. I hate to put that in here but I want you to know what Im dealing with along with a dead washer. Any help you can offer would be appreciated.

The washer and dryer, Cabrio, machines are not even 4 years old and Ive had to repair four different things! Literally just replaced idler pulley today, went to put a load in wash and F1 code appeared. Control panel, 350.00 for whirlpool or a technician to repair! 285.00 for part. I called Whirlpool and was not offered any apology. Never again will I purchase Whirlpool crap appliances!

Whirlpool is one of the best appliances I have ever used. They last for years and the self clean ovens come in handy. I’m not to big on the electric stoves, but they are also amazing. Almost everyone in my family use Whirlpool, and we all love the stove and refrigerator. It is definitely a wonderful product.

I bought the stackable Whirlpool Duet. Piece of garbage (model # WFW9150WW). From day one the washer never worked. Error lights/bells kept going on before the second spin cycle. First repair guy couldnt figure it out. And the manual says just unplug and plug the power cable back in. Sure--every time I use it? I called Whirlpool service and they said a new control board was needed without even seeing the machine, which tells me this is a manufacturing flaw. I waited 2 months for the board. When it came, the repair guy put it in and then the machine would not stop filling. So another switch and hose are being ordered. Whirlpool customer service is completely useless. And no one will even discuss replacement. Now Im stuck. $700 out on the first machine and $200 on the extended warranty, which will be useless because Im going to dump the machine. And additional $800 on another new machine which probably wont work either. Oh, yeah, and you have to use special soap, which Ive tried, and got down to using only 1/2 a teaspoon because the suds never cleared. Please tell all your customers never to buy Whirlpool!

I just bought my washer 3 or 4 months ago. It is the worst washer I have ever owned. Anyone that has ever done laundry knows you need water to wash clothes. My clothes are not clean and my whites are very dingy. I use the same soap (Tide) and the same bleach (Clorox) that I have used for years. If I can find someone dumb enough to buy it I will sell it and get a good one. I would rather go back to the old wringer washers than this one.

Whirlpool washing machine model WCW4950XW2 - We have a barely two year washing machine that we purchased at Best Buy and it no longer drains or spins. After $100 repair call we were told that this is a common problem with this model. It is a transmission problem, and with the way the machine is built a repair person cannot get into the transmission to fix it. He suggested we buy a new washing machine. This is a travesty on so many levels! If whirlpool know it has a problem it should offer a partial refund for the purchase of a newer better machine. I keep thinking about what our landfill in this world look like with the proliferation of appliances that are engineered to last a year or two. I can guarantee you I will never purchase any Whirlpool produce again, and I will research whether other brands are associated with the whirlpool brand before I buy it. Sad that a once good company has gone to hell.

The Cabrio washer does not efficiently clean clothes! The clothes have a type of lint on them after washing, and our sheets have an odd discoloration that stays on them even after drying. We have a max. capacity washer/dryer, & we dont overload. Plus, we use the recommended detergents and the amount of detergent as directed. Fabrics dont even smell clean.

We bought a new side-by-side refrigerator (GSF26C5EXB00 26cf) with water and ice in the door. We have had to replace the built-in water filter every two months at $30+ per filter. This is unacceptable. We just want to know what to do to fix this problem. There is only one person who uses the ice maker, and no one uses the water in the door.

We purchased our appliances including a refrigerator, stove, microwave and a dishwasher from Home Depot and chose Whirlpool because we believed in their quality. We purchased an ice maker for the refrigerator and it did not get delivered so we had to contact the store to get this resolved. Once this was resolved we installed the ice maker and began to use the products. We noticed a leak from the dish washer and checked the connections only to find out the leak was coming from inside the door. We contacted whirlpool to let them know. We were then contacted by whirlpool that they could not find a service center in our area and we needed to find one and they would reimburse us 150.00 for the service center that we find to come look at it and then we need to let whirlpool know what parts were needed and they would send them to us then we could have the service center come back and install the parts.After receiving this information I contacted whirlpool to let them know that this was unacceptable. First of all this is time and money out of my pocket and no service center is going to make two separate service calls for 150.00 dollars. So whirlpool tells me they have done all they can do in which I informed them that they have not done all they can do and they we just dumping this on me to take care of. So after arguing my point, the whirlpool employee decided to call a service center and make an appointment for Jan 09, 2020 which I agreed with and hopefully the problem will be solved. This should have been done from the very beginning instead of wasting my time only to have the whirlpool employees do their job. A customer should not have to deal with this. In the future I will using a different company for my products, not because of the product but because of the service. I have made a copy of this and will be posting my review.

Purchased a black Whirlpool refrigerator, Gold Series, Model GB2FHDX WB 22 cu ft. with bottom freezer from hhgregg. Within one month I had water on my floor, ice buildup on bottom freezer floor. I had previously reviewed fridge and noise was a concern but I thought I could live with that. I contacted hhgregg. They would do NOTHING, told me to contact Whirlpool. The 1st repairman said it was the ice-maker. I DO NOT have an ice maker. He fixed a duckbill. 2nd call 6 months later, same problem with water, serviceman replaced duckbill. Next year, 2011 same problem with water on floor and ice buildup on freezer bottom floor. After numerous repairmen I contacted Corporate Office of Whirlpool. They sent another repairman at their expense. We are now 6 years later and I am having the same problem. Dont buy a Whirlpool Gold & dont buy from hhgregg.

The built-in microwave above the stove was in the home when we bought it seven years ago, so not sure how old it is. Although it had a crack in the door, near the handle, weve had not one problem with the unit. The crack has not opened more, or gotten longer, in the seven years weve been in the home. The unit is easy to clean, and has worked perfectly. It is simple to use, although no directions came with it, it was easy to figure it out.

I am very happy with this dishwasher. It is not a high end, rather middle of the road, but is very quiet, does a great job of cleaning my dishes and pots and pans.

We bought a new refrigerator when we bought our house in Dec. 2008. On the third of July 2015 my Whirlpool Gold stopped being cold. In fact it was a bit warm. Had a repairman out here today. Warranty expired and the compressor has failed. Wow! Im not happy.

This dishwasher is disappointing. Very noisy. Water consuming, and does not clean dishes properly. In addition not much options with timing settings. There are just few setting options and each take long time.

I own a top two door refrigerator cabinet with a middle drawer meat cooler and a pull-out out lower chest freezer. The ice maker is built into the door and it is a very simple to operate and stable appliance. The refrigerators space is very functional and flexible for your food storage.. We have moved it 3 times and never had a problem. It is my wifes favorite appliance and fits our needs perfectly without a lot of bells and whistles. The ice maker filter is easy to change and the ice maker itself is super reliable. The model number is WRX735SDBM00. We have been Maytag and Whirlpool appliance owners forever because of their reliability and the ease of used to clean them.

I did not purchase it, the stove came with the house. I like the flat-top... easy to clean. I dont like that any little spill causes a stain that has to be cleaned. I didnt shop for this one. Although I would have this as an option if I was shopping. Low quality would be a problem. I want my stove to last a very long time. But, I dont want to pay a lot of money for it. I have a Whirlpool, glass top (smooth top) built in stove. I dont know the model. It has 4 electric burners, of 2 sizes. It has dials to control the heat amount.

I have a Whirlpool dishwasher for a few years, it cleans great, works great, the dishes come out clean and shiny, so do the glassware. Even pots come out nice and clean, what more can you ask for?

Whirlpool slide in range, microwave, dishwasher, KitchenAid fridge: All appliances, stainless finish, were bought with my home in October 2006. Range - Within the first year, I had problems with the outer plastic pieces breaking, the motherboard and the oven and broiler not working. The screws holding the knobs on fell out several times. The oven door was fixed several times this past year until finally it fell off and broke for good and now the oven does not work at all. Microwave - The rotisserie motor stopped working this past year. Dishwasher - Just after the first year, the outer shell of the door came apart. KitchenAid fridge - Within the first year, the temperature adjuster broke. The second year, the ice maker stopped working. This year, the ice maker broke again and the motor quit working twice already and all has been repaired. The freezer handle has fallen off as well.

Cabrio Washer WTW6600SW1 - We purchased this washing machine back in January of 2007 and have had nothing but issues with it. We thought Whirlpool was an upstanding brand and weve found out otherwise. They havent stood behind their product or the issues we have had along with all the other people. There has been a Facebook page about the Famous F1 error code. We have had numerous other error codes we have had to pay to have someone come out to fix. We paid almost $700 for this machine and have had to pay out several hundred more dollars just in repairs. Not worth the money and the company doesnt deserve to be in business if they dont back their product. I get buying a warranty, but if they are same problem with so many machines, it sounds like a manufacturing defect to me.

I purchased this range 7 2013. I was a snowbird at the time so after November I went south. Upon returning my top oven when lit had a gas smell. It took three weeks to get someone out and was told it was the igniter and would cost 350.00 to fix. I then called dte gas for them come out as I have full house warranty. Since then five calls a new igniter and a new board just put in two weeks ago the board doesnt work. This unit has been discontinued. I would like to know why. And if there is a class action suit against. Whirlpool. Co.

My oven is less than 2 years old. The blue enamel has had cracks for over a year & was told its cosmetic & theres nothing that they can do about that. Now its starting to pop off. I found a few slivers in a vegetable dish! Now I cant even use the top oven because of this! It seems to only affect the bottom of the top oven. I feel that the temp may be getting too hot for the blue enamel which is another safety concern. I have contacted Whirlpool/KitchenAid to be told that if they send out a repair person he would just use a marker on chips. I was told they would give me an employee discount from $3000 to $1800 to replace but I would have to act right away for that price! Really? My oven is only 1 & a half old.When I started researching this problem I am having I found many complaints of people having the same problem! As a consumer I feel so mad & frustrated that they are not doing anything about this since its an ongoing complaint from so many dissatisfied consumers. I do believe it is a safety & health risk now that its showing up in the food that has been cooked in that oven. I would urge anyone thinking of buying a Whirlpool/KitchenAid cobalt blue enamel oven not to! They will not stand behind their product & you will have to replace at your own expense. Shame on you Whirlpool!

I bought a new Whirlpool gas hot water 40 gal tank from Lowes. I Installed it, but the pilot light would not light. So Cal Gas Co came out and said they did not like the new design, but that was how they were now making them. Gas is shot out from a pipe into the tank, however its fairly open. The pilot ignitor is similar to the one on barbarques that often do not last. You cannot get to it to light it manually. Several calls were made to Whirlpool and they sent a repair man out to fix it. You can imagine buying a new hot water heater and having it work part time. The repair man explained that the unit needed a new thermopile, but he could not put one on until whirlpool authorized it, which they would not. After a rather heated conversation with whirlpool they agreed to FedEx a part overnight. Of course the repairman could not wait for me to call and had to come back again. The pilot light still does not stay lit, and Whirlpool now wants to talk about how the tank is vented. This has nothing to do with the pilot light, nor did putting in a new 1/2 gas line and valve as per Whirlpools request. Whirlpool has a problem and they refuse to acknowledge it. However, it is Lowes that chose to buy from whirlpool and they do little if anything to stand behind their product and gain consumer confidence. My suggestion would be dont buy whirlpool, and shop at Home Depot.

The refrigerator has worked OK except for occasional freezing towards the back. However the vegetable bins have both broken starting with various parts of the handles in front. We eventually replaced them. A brand new one arrive already broken. Same cheap brittle plastic. No alternative available. The company denies any problems or complaints about the bins. Feels like a small profit center for them.

Havent even had the Cabrio washer for three years & Ive hated it since day one!!! First, our clothes dont come out clean OR come out with white streaks (changed soap, still happened!). Washing bedding is a nightmare! They are sopping wet & I have to wring it out. Finally broke down today & the repairman quoted over $600 to fix (paid $800). Take this piece of junk away!!! It cost me less to replace than get fixed; way to help the environment!

Let me just start by saying I have multiple Whirlpool appliances, and I have always bought Whirlpool appliances in the past. I bought a refrigerator 3 months ago, and it quit working. So, I called Whirlpool to come service it. The service repairman said someone left the freezer door open and it froze up. Two days later, I had to call them back again, because now, the fridge part was not keeping food cold. He came back out and told me it was the compressor. I then in return called Whirlpool that afternoon, and they refused to replace it saying they had to follow their Warranty Policy and they would call me back on Wednesday. They did call back on Wednesday and told me they had located the part. I got a call on Tuesday of the following week and was informed they could not locate the part. I called Whirlpool the next day, and they told me they would have to send it to their Exchange department for review and I would hear back from them in 3 business days. I asked for them to rush my request, but they told they have no way of doing that. I will never buy a Whirlpool product again!

Our Neptune washing machine is 15 yrs. old. Minimal problems, which I could fix myself. The door gasket needs constant attention to prevent mold. It is a front loader. I have replaced the gasket once. The belt transiently slips.

Purchased gas water heater from Lowes in 2012. Had no problems until July 2018. Its under warranty but have had to replace the control valve completely and the burner 5 times and it still is not fixed. Dont waste your money. Buy something else.

Smelled strange odor in laundry room area.. Noticed plastic panel to Whirlpool electric water heater controls was melting and immediately closed breaker to the heater.. After inspection of heater control panel, noticed all wiring damaged and burnt causing burning smell.

Very unhappy all the way around with Whirlpool. The first refrigerator shipped had to be replaced, I do not remember the original problem, just the ordeal involved. The replacement had to have the computer board replaced twice, the icemaker stopped working after a few months, the freezer door does not seal properly. And now, after less than 3 years, the drain is clogged. After researching, come to find out this is a common problem and has resulted in many water damaged wood floors, including my own. Never Whirlpool again. There are much better brands on the market today with better price points. I highly recommend staying away from Whirlpool.

WHIRLPOOL REFRIGERATOR MODEL WRF532SMBM01 FRENCH DOOR - Gasket in refrigerator door totally cracked in bottom part and torn on the side only after 2 years and one month of use. I have another Whirlpool refrigerator for 7 years without gasket failure. My other 3 previous refrigerators which I have owned more than 10 years. Each also never had any problems.

The Whirlpool fridge we bought kept freezing food in the fridge. Local technicians couldnt solve the problem after replacing some parts. They called Whirlpools technical person and found there are other similar cases for this model. We were told to wait till they solve the engineering issue. We require to replace another model. Whirlpools customer service Supervisor whose name is Alisha talked very arrogantly and hung up on us. In one word, bad products, bad service, bad people. We will stay away from any Whirlpool product in the future.

I purchased a stainless steel side by side refrigerator and unbelievably the doorshelves came crashing down - they just cracked in the middle. How cheap can stuff be made, those fridges are not cheap. I thought Whirlpool was a good product - I guess not.

Washer does great job and happy with the results, very well. Appearance of dishes are good and leaving dishes very clean as well, would recommend this dishwasher to anybody. The color is also great and matches up with my stove and refrigerator, making the kitchen look very nice and great approach for other appliances to match.

Absolute garbage!!! French door refrig/bottom freezer. Too much to go into. This is by far the worst product that I have EVER purchased in my life. If I was strong enough to lift this piece of ** over my head I would carry it into the corporate headquarters of these money grabbing dirt balls and throw it through the CEOs door. Amend that: I would locate customer service and consider them bowling pins. What a bummer; how far we have fallen!!!

I bought Whirlpool front load washer at Sears in June 27, 2012... (serial W104408696A) (W10409178A-SP). I had 6 episodes within a 1-year time that my clothes got burn holes and the inside of the washer. I would find a handful of gray powder after doing my laundry. The first time it happened, I thought that I left something inside my clothes that resulted to it, but I did nothing to contribute to the event. The second time it happened, I thought Im putting the wrong setting, so I chose another setting to wash my clothes. In that span of 1 year it was on and off happening. I read different reviews on this washer, and I am not the only one whos had this problem. Finally in 2013, before my warranty would expire, I requested for Whirlpool to fix the problem. Right away the tech told me that the problem was the glass covering, so they replaced it. Now my washer would not drain. I believe that this product does not belong in the market. If they knew what the problem was, they should have recalled it. I kept the sample of that gray powder.

I have a Whirlpool french door unit with ice & water through the freezer door. I recently noticed rust in the ice. When the extended service plans tech came to see it he told me that the ice bucket would have to be ordered. Almost a month later, I called him and was told that rust isnt covered. I understand that surface or cosmetic rust shouldnt be covered, but rust in a place where it can be ingested is different. Anyway, I called Whirlpool directly and a very nice phone rep agreed with me and asked her supervisor. Needless to say, I just sent Whirlpool a letter stating that I would pursue this through legal channels if I dont get satisfaction.

I would like to share whirlpools lack of ownership for parts they knew were faulty that caused significant damage to my floor. Its absolutely horrendous that one would purchase the highest end dishwasher they offer (all highest end appliances in 3 homes so far) and the company is only willing to cover the replacement of the part. Its a horrible way to run a company. I hope that my review will warn prospective customers to stay away from a company who is only willing to take your cash at purchase (charging an arm and a leg no less) and not care about any repercussions after the fact. I hope they enjoy our 15k, because it will be the last penny they get from us.

This unit has been in operation for over 40 years. It recently developed a freon leak. Rather than repair this unit that uses out of date freon I am going to replace the unit. I have had to replace the contactor twice and had to service the condenser fan once. All in all I think I got my money's worth.

Cabrio Washing Machine - I purchased my washer and dryer in May of 2008. I had problems with sheets, towels and pants getting very twisted and tangled, but I just attributed that to a design flaw. My problems really began in January 2013 when loads were not level all the time. It didnt matter if it were 1 shirt or a load of towels; you had to stand by the machine and it took forever to finish a cycle.On 1/11/13, the first repair was the rods that kept the drum stable. $260.82 later, it worked again. On 2/16/13, the washer quit working. On 2/18/13, the repairman was back out. It needed a lid lock switch. It was $87.14 that time and he would be back when the part arrives ... There was still no washing machine. On 2/21/13, he returned with the lid switch and replaced it. That was $178.04 but wait, there were still other error codes so there was no working machine.I refuse to pay anymore as I now fear I will be buying a new machine after spending over $500 in less than 6 weeks, but Whirlpool did the right thing when I called and they agreed to repair the machine. They wanted a different company to come diagnose the problem (the machine gave an F50 and F51 error code to the repairman here on the 21st), so I have to wait for another repairman to come and look at the same codes flashing on the LED readout.On 3/1/13, the A&E repairman that Whirlpool sent out arrived at my house. I have been without a washer since the 16th of February. He diagnosed the problem and said that it is a $1,000 repair! I called Whirlpool and asked for a new machine, instead of throwing more money at this one. They informed me that if I didnt like their offer, they wont do anything then. I agreed to the repair.Parts started arriving at my house. On 3/13/13, another A&E repairman came out and started to fix the machine. He informed me that there was more wrong than the first guy thought, but he had the circuit boards so he would get it going. On 3/24/13, the washer quit working again and was flashing an F51 error code. This is the biggest piece of junk I have owned in my life. I have missed 5 half days of work since January and there is no end in sight. Why is Whirlpool allowed to get away with such an inferior machine?

This microwave lasted for 15 years! Worked great. Started looking kind of bad after 10 years but still worked. Amazing! All their products are great and last a long time. Would buy again. Boil water in minutes.

The top of the range stays very hot. Not the burners -- just the top of the stove itself. Now the oven pilot wont light and there doesnt seem to be any sound or smell of gas when I try, though the range works fine.

Cabrio Whirlpool Washer - Bought this washer from HHGregg in Orange Park, Florida. This washing machine is horrible!! It does not fill the tub with water enough to even cover the clothes. Some of the clothes are not even wet. They just sit in dirty water, no agitation. Then it refills with water and the rinse water is dirty, there is no agitation or movement during the wash cycle. My clothes are stained and dried food and dirt are still on the clothes. My white clothes are now gray. This is the worst machine. I have tried everything. I am now hand washing the clothes and trying to add water to at least cover the clothes but the sensor just drains the extra water out. This machine is less than a year old. There should be a class action lawsuit against Whirlpool. I am not the only one; everyone that has this machine says it is a nightmare.

We had Lowes install a Whirlpool model Nu40T121-403 natural gas water heater early October 2012. The temp controller went out in October of 2014. I replaced the controller myself at a cost of $30 for overnight UPS from the manufacturer, American Water Heater. The controller went out again almost exactly one year later and I again replaced it for the $30 shipping charge. In both instances the customer service person told me the malfunction was probably due to my not flushing the heater annually, causing a sediment buildup. The water to the heater not only flushed annually, but is filtered through a water softener and there was absolutely no evidence of sediment in the drain water or on the part of the control that is in the tank. Now it has stopped working a third time. I called Lowes about replacing it, but they only carry Whirlpool, so wont be buying a replacement from them.

The capacity is small but it does a good job of washing and drying the dishes. I always check to make sure that all dishes are washed including silverware and they are. My dishwasher is quite old but it is still sufficient for our use.