Whirlpool WRF993FIFMOO: Refrigerator Problems: the doors do not close, both ice makers went out, The computer on the filtration will go off. Refrigerator had problems maintaining temperature since 8.12.17. The refrigerator no longer works. This is my second unit since 11.09.16. It came from nfm.com.

Whirlpool corporation is one of the worst company Im dealing with, we bought a new home and had new Whirlpool appliance incorrectly installed in Sept 2018, I raised a ticket in Oct 2018 for my dishwasher which doesnt open properly, flamingo services in Atlanta came and unplugged dishwasher saying its not installed properly. I wait for more than 30 days for parts to arrive and my dishwasher to be fixed. Called Whirlpool/Flamingo. Both dont give confirmation as to when the parts will arrive (note they havent been shipped by distributor). Wow seriously??? Please Im already facing inconvenience since more than month on a brand New appliance. They say no compensation no replacement. Only I will have to wait indefinite time for dishwasher to be shipped and repaired. So much of inconvenience and customer service says she will not call me back and I will have to follow up? What service is this, infinite wait??? Mine is still in warranty, #Georgia #cumming

I stumbled across this site while browsing the Net, looking for a way to deal with the same situation I now know you all have been struggling with: Whirlpool Washing Machine! I wonder: Is NASA still accepting volunteers for their living on Mars experiment? Id rather beat my clothes on a rock than touch that POS Whirlpool that has me back on tranquilizers! Mine was purchased about 2 years ago when I was in bad health and my son was handling my affairs. I could tell - just by listening - there was something very wrong with it, from the first load my son attempted to wash. It would start and stop, restart, restop, ad infinitum and made a terrible racket. I told him nobody would intentionally make a machine like that--something had to be wrong with it but he assured me that he had checked both with the store that sold it and he also read the manual. He had a hard time accepting but we thought maybe this was because it was new and would settle down after some use; after all, the store (Best Buy) assured him the sound was normal for this particular machine. However, the weird sounds did NOT lessen nor stop, nor did the starts and stops. Little did we know, this was just the tip of the iceberg! We have encountered/suffered through every nasty performance detailed here: low water, wont spin, leaves clothes soaking wet, wont spin out excess water, lid locks (grrrrrr), it cant seem to switch from one procedure to the next; there is nothing washing the dirt out of the clothes--they just sit in the water and soak(?), then the water is released. Clothes come out with stains still on, so wet that the water must be wrung out of them! Very hard for me with arthritis all through my body! Ive tried countless times to reset machine to Drain & Spin. Ive even waited (yawn) for it to unlock so I can open and then readjust the heavy/wet laundry, trying to make it even all the way around so to avoid an unbalance. But nothing helps. It will start to spin. And then it stops. (wait, wait) Starts to spin again. Stops. (wait, wait) Starts again, does it a bit longer. (start to relax) Stops. Ive spent HOURS engaged in that kind of mindless, maddening frustration, just trying to wash one small-medium load. (I wash only for one person--myself, now.) My son, who got married and no longer lives with me, said the only way he could manage to struggle through it - and agrees it DOES take an inordinate amount of time--for just ONE load, he has to put the settings so that it washes in Deep Water even if small load. He sets Rinse, to 2 Rinses. He sets it to Soak even if the soil is light. Even then, it still makes noises, starts and stops, has to be adjusted several times during Drain & Spin. Last but not least, the noxious odor: OMG! I left one batch of laundry in the machine, with the lid open, as it was very late so figured Id dry them next morning. Some hours later when I went back to shake them out and put in clothes dryer, they smelled so awful, I had to wash them all over again! In fact, Ive had to follow my sons admonition to leave the lid up AT ALL TIMES unless actually washing in order to keep down the stink. I washed my last load with Baking Soda added to wash cycle in an attempt to lessen the odor and get laundry cleaner. Someone here wrote - in their review - that there should be a Class Action (Law) Suit filed against Whirlpool. I AGREE!!! And I want to opt IN on it. There are several law firms that advertise on t.v. that specialize in Class Actions. It would take some time and paperwork but will not cost us anything unless we win the case. Then the law firm gets a percentage. I am willing to work with one more others here who truly want to settle out this problem. I cant believe 2,000 (and thats only here), people are willing to eat hundreds, thousands of dollars of worthless, mind-gripping, rubble such as we have spent our hard-earned money. Other manufacturers recall their defective merchandise and/or replace it, or make arrangements with the retail stores who carry it to make amends, free repairs, whatever it takes to make dissatisfied, disenfranchised customers, whole. We paid for these demons from hell and we deserve to get an equivalent in merchandise (that works properly) or services. That is how it is done here in the U.S. For the life of me, I just cant comprehend why Whirlpool has been allowed to continue selling this junk--why no entity or person or lawsuit has stopped them! As I said, I am willing to work with a core group who is serious about filing a Class Action (Law) Suit against Whirlpool. It may be that the retail stores would be included as well; however, that is a matter best left to the discretion of whichever law firm we select to represent us. For those of you here who do NOT wish to be included, do not worry; you are not being pushed into anything. The way Class Actions work, you have the choice to opt IN (be included to receive your pro-rata share of what is collected). Or you are completely free to opt OUT. By opting out, that means you do not wish to be part of the Class Action and therefore, you will not be included nor will you receive any portion of the recompense collected via the Class Action. Just for your information, though: You are allowed, by law, to bring your OWN lawsuit against all or some of the same parties. The most common reason for opting out, is if you have suffered an extra large financial loss and prefer to file your own suit in order to collect ALL recompense; whereas, sometimes - in a Class Action - the individual plaintiffs may not recoup the total amount they feel they have lost. If you DO decide to opt out and go on your own, realize you will be fully responsible for lawyer fees (although you CAN add them into the balance you are seeking in your suit. Settlement of your claim may or may not include lawyers fees.) Good Luck to all. To those who wish to file a Class Action with some of the rest of us, please contact me if you want me as part of the core group of plaintiffs.

Our countertop Whirlpool microwave oven is just over two years old and one of the led lights in the clock display just went out. The push-button opening mechanism is very hard to work and quite loud when the door is shut. When the timer is set but the start button is not activated for a few minutes, the door warning goes on and you have to reset the timer. There are five beeps that indicate when cooking is done and they continue even when the door is opened. The only way to stop them is to push the stop button and there is no way to adjust the noise level or number of beeps.

I bought my Whirlpool top loading washing machine 07-22-14. I so dislike the locking mechanism and will be certain to never, ever buy a machine with that feature again. It is so irritating to try to add something but cant because its locked so have to hold the button 3 seconds to unlock and start all over. If there was any way to get around it I would. I will stay away from Whirlpool products in the future and will be sure to check the next time I buy that the lid of the washer can be lifted when not spinning. Also, I do not like that it sticks on rinse sometimes and the only way to end a cycle is to hold the button and then start over with much wasted water.

The pilot light went out on our Whirlpool hot water heater. We followed instructions and were unable to relight. Our plumber was also unable to relight so we ordered new parts with associated overnight express costs. The plumber returned and worked for over an hour. When the pilot light came on the burner assembly burned out the new thermo coupling and that needed to be replaced again. This happened again. I would like to join the class action suit as Whirlpool has known about this problem and consumers are paying more than the original cost of the unit for repairs.

I purchased my Whirlpool microwave model WMH2175XVS-2 in March 2011. The magnetron went bad 3 years and 1 month later. Thats only 37 months! Whirlpool is very sorry but of course the warranty is expired! Oh by the way, I replaced a microwave that lasted 10 Years which was a second microwave (which is still going after 15 years).

We purchased our home brand new in June 2010 and with it came all Whirlpool appliances. We started having cosmetic problems with our over the counter microwave about 2 years later (model WMH2175XVS-2). The plastic casing around the door handle started to crack on the top and the bottom and now both pieces are completely gone as they fell off. The handle is still attached and the microwave is usable; however, it looks shoddy. To replace it, we were told by a Whirlpool authorized repair person that you would have to replace the whole door at a cost of $300 or more if you include labor. I am disappointed that this happened and that we cant get it repaired. It makes me think again about purchasing more Whirlpool appliances.

I bought Whirlpool dishwasher (silver, Golden Series), after one year it just stopped for nothing and the circuit controller failed with error code E2/F2. So it was expensive but turned out to be totally unreliable. I had to pay $200 to get extended warranty and still waiting for the parts!!! Worst experience ever (uh Golden Series, for me it is Plastic Series). Will never buy any product from this company again.

Our original dishwasher lasted many years and did a good job until it didnt. We replaced it with this one that we found at Home Depot. It is not the one we wanted but the delivery was months away and this one was in stock. It does a good job in cleaning the dishes. The only issue I have is that the top rack is not designed for large mugs or glasses. The wine glass holder has 3 slots, but we can only get two in based on the spacing. Also, our mugs dont fit, well on the other side, inside the fingers. Maybe our dishes are on the larger side...I dont think so but like I said earlier, it does a good job cleaning the dishes.

I bought a Cabrio top loader in 2007. Have now replaced a pump for the 2nd time. Replaced a circuit board once. Thank goodness the machine was purchased at a local appliance store who stand behind what they sell and are very prompt in their response time.

I bought a Whirlpool model # WRF757SDEM. It has failed twice in 7 months. The tops temperature hovers at 54 degrees Fahrenheit. The freezer works fine. I had a whirlpool fridge for 10 years before I bought this one and never had trouble with it. This particular model seems to have a design flaws according to other reviews I saw on this site that read similar to mine. We are waiting on parts. This is the second time in 6-7 weeks that it breaks down.

Got the dreaded 4 flashes LED status - High Temperature Shutdown. Online and vendor documentation says that this condition requires gas valve unit replacement, a $115 option. If your Pilot remains burning, but main burner does not kick in, then a good guess is the circuit board requires a reset. Prior to any further work, test the Thermopile, that is the round item with two blades located below and to the right of the gas valve unit. Move knob on control panel to OFF1) Pull out plug with red and white wires located on front of gas control. 2) Have someone Hold in the control knob on the unit at Pilot, and make sure Pilot flame is burning. 3) Using a multi-meter, set it to millivolt reading, and test voltage across the two wires. Voltage should be greater than 350mV, preferably >500mV. 4) If you get a reading in that range, your Thermopile is good. Turn knob to off position. Do NOT uncouple gas lines. 5) Piezo Igniter wire comes apart, disconnect it. 6) Remove screw that holds front cover. (screw located bottom left as you look at the unit) 7)Cover simply pulls off directly towards you. 8)Remove the screw holding the circuit board to the cover, and remove circuit board by unclipping it - 3 clips, one either side and one at bottom. 9) Unplug the 3 strand thermostat cable, you should now have the circuit board clear. 10) Take a piece of aluminum foil, fold it twice, then lay circuit board on it facing up, do it on top of tank, want it grounded. 11)Using one of the multimeter probes, wrap a piece of foil around it, keeping point free, and ground it too. Then slowly work around the board, touching all the solder connections you see, as well as the chip legs. Pay particular attention to the round objects on the board (capacitors), make sure to ground out each of the solder points, visible either side. (takes about 5- 8 minutes, take your time) 12) Once done, reconnect thermostat cable to board, then reinstall board into cover (dont forget the screw)13) Place cover back into place, screw in cover screw, reattach Piezo wire and black electrical plug with thermopile wires. 14) set Knob to Pilot, get pilot lit (may take a few hits on the Piezo button) and while still holding the knob in, watch to see what LED flashes you get (there will be a 10 second time lapse before it will start to flash) 15) You should either get 1 flash or 7 flashes, that means the board is reset, now turn knob to warm, and see if main burner kicks in. Good luck, and for a half hours work you have saved yourself $$$. PS: If it occurs again, you have sediment build up, need to drain the tank.

Awful customer service. We bought a washing machine in 2010 and it has shredded a ton of clothes over the years. I called customer service to see what they could do to help me with this problem. After about 45 minutes of trying to get more than a service that I would have to be responsible for, the supervisor offered me a new washer at a discounted price. I went online to compare and found out I could purchase the exact same washing machine at home depot & best buy for $50 cheaper. I called back to see if there was anything they could have done and they would not budge.Shame on you Whirlpool. You have lost a customer and I will make sure no one I know buys one of your products ever again. I cannot believe that you would not make any accommodations for us. We bought that washing machine with the intention of keeping it for 15 years. It has cost us countless amounts of blankets, shirts, pants, etc. I cant believe you wouldnt help us after all the money this piece of junk cost us.

We bought a Whirlpool refrigerator/freezer from Lowes 4 years and 11 months ago. It apparently sprang a freon leak somewhere... repair person cannot tell until they take it into their workshop which will cost $300 - 400 just to find! And then there is a strong possibility that the compressor is toast. I called the company and they were not willing to help out at all. Why should a refrigerator only last 5 years (technically less)? I am not buying another Whirlpool and am looking for refrigerators that have a longer warranty on their compressors - LG which has 10 years! Whirlpool cant do that????

The shelves in freezer don’t lock into anything so if you don’t balance the food right on the shelf it will tip over. I had to replace the fan motor in freezer. The refrigerator is only 4 years old. The little tray under the water and ice outside of door if you shut the freezer door too quick water from tray goes everywhere. The water filter cost $50.00. If you have bad water you will need to change it twice a month.

We bought a Whirlpool Cabrio in April 2012 and in July 2012, it started giving problems. It wouldnt start. It started humming. We heard money-like jingling noises. It stopped spinning and rinsing clothes. I called for service. No luck with that. So in order to wash, I had to drag the washer to the back door (which ripped up my new floors) hang hose outside for it to finish the load. Well a few months later, that didnt work so the assistant where it was purchased told us to cut the pipe down in the wall. Now we have a big hole in the wall. My floors are ruined and we are out getting another washer. This one is not even a year old. That was a $750 loss.

I purchased a replacement gas range (whirlpool) approximately 3 years ago. Its not the top of the line, no bells or whistles such as a self-cleaning oven or such. I did love the three huge grates on top, one which is interchangeable with a flat grill. If it only worked it would be a decent range. The center oblong burner struggled to ignite in full from the beginning. Often, I light the thing with a grill lighter. But the thing that pisses me off more than anything is the F2 error that appears 70% of the time on the control panel when I am preheating the freaking oven. I am NOT replacing the control panel on a $400.00 range. What I have discovered is I can hit off my power at the main, not once, but 2-3xs and reset or over ride the damn thing. I read this F2 code is a common occurrence so I got to thinking, why? My conclusion is the heat from the oven is vented up & directly on the control board panel. Really now, whos bright idea was it to expose a control board to repeated temps of 350+? Hate this appliance. Next range will NOT be a new one, Im looking to replace this junk with something mom or grandma had that lasted decades, not a couple years. Shame on you Whirlpool for producing such low quality, disposable products. By the way, I just went through this with a new fridge so theres much to be desired with new appliances. Theyre junk, designed to fail.

I purchase this machine over 15 years ago. It’s still working, washes the clothes. The only problem the section where the bleach is poured is completely rusted out. The machine has definitely lasted beyond the 15-year cycle. I intend to purchase a new one. I probably would buy the same brand.

Purchased front load washer & dryer 2009 - have had issues with the washer ever since. The last episode has taken 3 visits from repairman - they cant figure out what the problem is - wont finish a cycle (any of them) and locks up. Cant open the door without turning it off and then back on. But the load wont spin dry - leaves clothes wet. Already had the harness replaced a couple of years ago and now they replaced the flywheel (it was warped) thinking that was the problem. Nope. Still wont work & the repair company said they cant figure it out & neither can Whirlpool. Im very angry after reading all of these posts about Whirlpool. Not a happy customer. But what can you do???

I purchased the Cabrio washer and dryer 4 years ago and had no problems until recently. The motor and the harness broke and the cost to repair was almost as much as a new washer. The repairman told me that this is a common problem with all washers that Whirlpool makes as they have the same motor and harness. He gave me a list of all the brands that they make and suggested if I buy one to get an extended warranty. I would not recommend anyone buy an appliance from a company that continues to manufacture faulty products. I wonder if they own the extended warranty company?

Whirlpool has been around for years. This is my 3rd machine. I had both washer and dryer. But machines today arent made like they use to. They breaks down easily. The parts are cheap. I had a Samsung washer. It was one of the recalls. I got ripped off by Samsung and Best buy. I have received the full value.

I purchased this machine in April and already, the right leg is rusted and the under seam of machine is rusted. I have throw rug under it and where the leg is, there is rust on the rug. I called service from Whirlpool and 2 servicemen came out. The first one told me I was loading it wrong and the water was splashing over the inside tub to rust the leg and I asked, So why is the seam under the machine rusted? No answer. The second one came out and told me he could not find anything wrong with the machine and doesnt know why it is rusting, but he never gave me a paper to sign off on. He also said that maybe it was rusted when it was delivered. Not!!! Then I call P.C. Richard in Watchung, NJ where I bought the machine at and told them about the problem. They sent a serviceman out and he said that the bleach condensation is causing the rust, its known fact that this machine has this problem. He said that the water does not run through the dispenser but there is a model that does. I want a credit on this machine and get the upgraded one. It states on the machine that I can use bleach but it doesnt say it will cause rusting. I want you to tell me how a 9-month-old machine is rusted on one leg and the seam underneath is also rusted!!!! I had a machine for 10 years and it wasnt rusted. I am very unhappy with this product and with the customer service of Whirlpool. This is my first Whirlpool washer and I would not recommend this washer to anyone. I paid $600.00 for this washer and it should not be rusting.

It does not clean as well as I would like. I have to wash the dishes before I put them in the dishwasher. It is also much too noisy for my liking. It has the pot wash and the dish wash. It has several types of cycles, long - short and it has a drying mode. My next dishwasher will be bigger so I do not have to run it every day. My next will be stainless. This particular dishwasher is nothing special but I have my eye on one with the buttons in the top of the door so nothing is visible on the surface. My dishwasher is getting older and I will replace it soon.

The first Front load Whirlpool washer leaked. 5 repair techs visits. Wasted days. Finally located the leak, in the main basket. Replaced washer. Second washer the clothes come out smelling like a horse blanket. Mold. Clean the washer every month still mold. Plan on junking the washer a getting a new model. Never expected this much trouble and time on a basic appliance.

I have a Whirlpool dryer for about 8 years. The lint catcher has some holes so I called the 1800 phone no. that I got from the dryer and order the part. That happened in May 18 - I pay for it. I have been told that I will receive the part in 5-7 days. Today, Aug. 27, I called see what really happen with my part. Well I have been transferred from a department to another. I waited over an hour on the phone. No employee can find my order in the system and hey keep on telling me that I did not order! In the end, the order have been found. They told me that the part has been in the back order and I will receive it on 9/12/2014 - 3 weeks away adding up to 4 mo since I order and my credit card was charged. I cancelled the order> I really do not want to deal with Whirlpool ever again. I am happy to pay for a new dryer - some other brand and put in the garbage the Whirlpool - for a lint catcher and bad customer service.

I bought a Whirlpool built washing machine on Jan. 8, 14. It stopped working on Aug. 9, 14. It is now Sept. 2, 14 and I am still waiting for it to be repaired. I am age 75 and it is difficult to load and unload clothes to take them to the laundry. The repairman order a part Aug. 26. Pony Express has not deliver the part at this time.

To start with, the ice maker drips non-stop. I have to check it several times a day to make sure its not puddling up and running my hardwood floor. Because of the continuous that, drip, freeze cycle, it creates an ice dam around the rubber boot between the ice maker and ice bin....which they located in the door where there is inadequate cold, so the cubes melt, making even more of a mess, causing it to be unable to dispense them because it is one big mass... oh and that creates an ice dam also, so on top of replacing a torn boot a couple times a year I have to chisel out the ice bucket and defrost it once a week.Want more? The ice tastes horrible. I have no idea why. It didnt in my last refrigerator. The Tap water tastes fine, I disconnected the line running in to the ice maker and tried the water from there and its fine. So somewhere in the ice maker, something is wrong. There is more. The unit is a year old and now inside the refrigerator it smells like gamey shrimp. I have no shrimp in the freezer, fridge, not have I. I dont store anything in poor sealing containers, nothing has spilled, I removed all drawers, panels, shelves and scrubbed the whole inside with bleach/water. I changed every filter, checked the drip pan (clean), and still half-rotten shrimp smell.My last refrigerator was an Amana from 1986. I bought it used in 93 and owned it until I got this Whirlpool. Never had a problem with it. I have had non-stop problems with this over-priced Whirlpool and I guarantee it is the LAST Whirlpool product I will ever own.

Disappointed with Whirlpool Gold bottom freezer GX2SHBXVY05. We purchase this refrigerator in December 2010 thinking we were buying a good quality french door fridge. It didnt take long before problems started with the freezer over freezing and the fridge not cooling. We also had a problem with water pooling on the bottom of the freezer then freezing into a solid piece of ice. Water eventually started pooling on the kitchen floor and living room carpet. We did not purchase the extended warranty believing we shouldnt have had to as we were believing a good name brand. After having a repair person in twice we were told we needed a new computer board and switch. Total cost for repair $350.00 plus previous charges, so far adding up to over $450.00. We called Whirlpool customer service, was a waste of time as they simply told me they could send out their own repair person to obtain the same diagnosis I already had. They told me I should have purchased the warranty. I told them I shouldnt have needed to. Whirlpool customer service refused to do anything for me as it was too long past the 1 year limited warranty. Doing my own research I found this to be a problem with a great many Whirlpool fridge owners and I mentioned this to their customer service and mentioned there should be a recall. I will no longer purchased another Whirlpool product as the company does not stand behind their product.

I just bought a house that has one of these ranges, and it was getting the F2 message. I found the problem. There is NO ventilation behind the electronic control so when the oven heats up, the control board gets too hot and throws the F2 code. That would indicate a bad temp sensor or bad board, but really its the heat shield on the back. Ive removed the metal plate from behind the control panel and it works fine now. Im considering drilling some vent holes and adding some insulation behind the control.

Bought a nice house in 2012 which has a Quiet Partner 3 Dishwasher. About twice a week it has to be reset pressing buttons because it blinks at you when you press start. Control board was replaced a couple times since we bought house. We just put up with it. The tub has a manufacturers defect in bottom where the plastic is so thin it finally cracked and over time water trickling out went to wall. Then ruined an area in finished basement ceiling. Ive used a couple different things to stop the leak but it always starts leaking. Customer service says its not under warranty so will buy a new dishwasher. But not Whirlpool or Maytag. Same company now. Dishwasher is a total piece of crap.

We purchased a Whirlpool Cabrio Platinum washer and dryer from HH Gregg and have had continuous issues with the washer. We have had the lid springs replaced two times since we purchased it and they are out again. I called our service company to ask why we have to continue to replace the springs very 6 months and they said it was a problem Whirlpool was having with this unit. I called Whirlpool and after being on the phone for 45 minutes, they told me there was not a recall, but I could buy the parts directly from them for 1/2 price. This amounts to about $20. The repair cost me about $200 every 6 months because it is a difficult installation. Whirlpool is a terrible company to deal with when you have a problem and they do not stand behind their products. I will never buy another Whirlpool product and will tell everyone I know the same.

We moved to a new home with all new Whirlpool appliances. We have been here 4 weeks and so far the stove has had a faulty part replaced in oven and now my microwave will not fully pop popcorn. Wonder what to expect next?? If you have a choice dont buy this brand. Inferior product.

Extremely quiet machine. I love that the silverware wrack is situated across the front of the door giving plenty of space for lots of silverware. This leaves even more room in the already large washing area for pots, pans, dishes, bowl, glassware & more.

The machine Will Not Clean the Clothes. Had to Buy A Maytag Washer.

Apparently, Whirlpool selling all their rejected faulty washing machine in the market. The trick they are playing is the machine being sold with one year parts-labor warranty; They wont replace these machines with a new one because they know that these machine will never work, consumer will buy the faulty machine, obviously it wont work so consumer will call for service. The service guy will say that “oh! Machine needs a part and then the customer service will say “the part is being ordered”, “wait”, then the service guy will come with the part and after wasting some time he will say “Oh! The machine needs another part, and again customer service will tell the consumer that “you keep calling us”. One year will be gone! Bottom line – faulty machine is sold, Whirlpool made profit, buyer is robbed. I am one unfortunate customer who purchased Whirlpool Washing Machine which never worked as it is a faulty machine which should not go to the market at all; Whirlpool made money on my hard-earned dollars and I been robbed.

We purchased a Whirlpool Cabrio washer and dryer less than 2 years ago. These are supposed to be high efficiency appliances, but the washer has never cleaned the clothes well and the dryer often has to be run more than once in order to get the clothes dry. Then, about two weeks ago, the washer started making such a loud noise on the spin cycle that it sounded like a jet plane taking off. It was hard to hear the television when it was running. Today, it started screeching and water leaked on the floor. I called the number listed on my manual and was basically told that it would cost half of what we had paid for the machine to fix it. What efficiency, a poor machine that lasts less than two years. We will never buy Whirlpool appliances again.

I purchased my washer about 1 month ago and I used daily. I went away for the weekend, and now it does not work. Washer will not wash, fill or spin, gives a LF error. All lines have been checked. I need to call service.

We bought this unit (Whirlpool fridge #WRF555SDF201) in November 2016. Was so excited! The fridge looks great, love the French doors, and the freezer. Its the ice maker! It spews crushed ice all over every time it is used. Its like the setting is stuck in-between crushed and cubed. Every time it is used ice goes on floor and I have to clean it up. If a small child uses it they get ice in their face and down their shirts. I have been told from Whirlpool and Lowes that it is in the design and they will not even try to fix it. They will definitely not replace it. Lowes claims they know about the way Whirlpool designs their ice makers and that they mention it to prospective buyers, but I know they did not tell me of this design flaw in the product before we bought it. I now simply have to deal with it. It is less than a year old and I burn with disappointment every time I use the ice maker. I am even more disappointed in the lack of concern for me, the customer. We bought 6 Whirlpool appliances at the same time from Lowes about 6 months ago. It will take awhile but they will NOT be replace with Whirlpool or purchased at Lowes.

We had refrigerator 2 years and compressor went out. Whirlpool would not repair. I will not buy Whirlpool again.

I bought a whirlpool washer from Whirlpool on February 27, 2011. Since then, they have come out and repaired the washer for 5 times. They have even taken the whole motor out, and replaced it. The last time they came, they said I would have to pay for the next time. Now, it has broken again, and I have to pay for a washer repair that is less than a year old. We bought the Whirlpool washer at Sears, and neither Sears, nor Whirlpool will stick by their product. We cannot afford another new washer, and to pay for repairs is a stretch too. Is there anything you can do?

Whirlpool front loader duet washer WF9400SW01 - I bought this washer brand new in 2007. The rubber ring by the door started to grow mold after 2 years, the washer collects water after wash. Water was dripping down to the drum and sit there. If I forget to check and drain it by turning on in the rinse cycle, it wets the entire floor. And it sounds like a freight train after 4 yrs when it spins. My last washer lasted 20 years and it was a whirlpool top loader. Thought I might get that with this one.. but NOT.

The oven steam cleans the oven but it only cleans the bottom, not the sides, back or door. They dont recommend oven cleaner so how do you clean it? My oven is a year old and looks like its never been cleaned. You would be better off with non cleaning oven and using oven cleaner. It would be less work. Horrible stove.

I purchased a gas range with JDR8895 last 09/06/2007 at Home Depot in Metro Denver for approximately $1700.00. I will make my final payment on my Home Depot account next month. I was preparing dinner last September 10, 2011. I had the pans on the cooktop, one on the right rear and one on the left front burners. This was the set up because the right front burner has stopped working some time ago. Both burners were on a low setting as I was simmering pasta sauce and just warming water as I was later going to boil it for the noodles. I was in my living room when I started to smell something odd. When I approached my kitchen, there was a fire coming from the rear of the cooktop and beneath the three burner knobs. It smelled like an electrical fire. I immediately turned off the burners with my hand wrapped in a towel and started putting out the fire by hitting it with the towel and blowing. The towel caught on fire. I grabbed my fire extinguisher and was ready to spray when finally, it looked like it burned out. The smell in my home is terrible, when I tried to test the lower burner it looked like it was catching on fire underneath the knob as well, so i immediately turned it off and batted it with a towel. Im not sure what happened here. I will make my final payment on this range next month and had the previous range in here since 1977 and that still worked fine. I spent a small fortune on this Jenn-Air, only to have it catch on fire that could have potentially burned my house down.On various web sites including consumer affairs, JDR8895 has many reports of fires. If this is a known problem, why has it not been addressed as a recall? My 9-year old was making soup the day before while I was in the living room. This could of easily happened to her! It is a very dangerous situation to put your consumers in!Whirlpool Corporation contacted the appliance repair company, Columbine Appliances, to inform them that they would only be covering the cost of their visit and not the cost of the parts to be replaced in the range (the ones that caught on fire). Through Columbine Appliance, Whirlpool wanted to inform me that this is not a safety hazard and that it was my fault as I got water in the control knobs. This is not true. If I did, I was not aware and was unable to find any literature about that being a safety hazard or that it could cause a fire. I have found and have forwarded to the CPSC many instances of this exact problem, often when the range was not even in use and are happening to other consumers. I am working on combining the data, contacting the other consumers and have since refused service on the range by Columbine Appliances. Whirlpool only tried to contact me after I left them a message regarding the status of the range and that I had no interest in paying for what I viewed as a defect in their range and a safety hazard. I found a news story of this range going up in flames. Its unbelievable that this company continues to stand behind this product and blame these fires on the consumers actions. I am disabled and have an oxygen machine in my home. I have no desire to have this unit catch on fire again and potentially die, especially since water does, on occasion, end up on cooktops. Thank you for your time and attention to this matter.

My Whirlpool washing machine is really easy to use. It is a mid-range machine but it has all the bells and whistles. Its a joy to use. It gets my clothes nice and clean. It does a great job. I would definitely buy another Whirlpool washing machine.

I purchased a new park model house with Whirlpool appliances. The fridge door is crooked in 2 directions. It is only adjustable in 1 directions. Top to bottom. After 5 months of trying to deal with whirlpool and being told my warranty is void because of adjusting the door according to their manual. They also tell me that warranty will not cover factory flaws which the crooked door obviously is. Whirlpool will never darken my door again except on the way out. Whirlpool sucks!

I purchased a Whirlpool Cabrio Washer In July 2014 for $937 cd. What a waste of my hard earned money! I have had nothing but issues with it since I purchased it. The retailer no longer sells them as they have seen nothing but complaints with them yet Whirlpool did nothing to help me as a client. It does not wash the clothes, there is such a foul smell even when cleaning it once a month as requested and the clothes comes out soaking and not rinsed properly. The technician came out and advised the washer was not broken. That is just the model. I have requested supervisors to call me back and most recently wrote the corporate office. I am out almost $1000 and in a situation where I have to go purchase a new washer as I just cant stand to use this product any longer. I am shocked they have not placed a recall on this model. What a poor product.

I purchased my Whirlpool refrigerator from Best Buy 11/20/19. It has been nothing but a nightmare. It freezes up and defrosts into the refrigerator.! I called Whirlpool about the situation. The company they use to fix my fridge S&S Appliance has not been keeping accurate records. I have all the calls from Best Buy and S&S Appliance. I was told today-all my records didn’t count. Best Buy Geek Squad couldn’t repair so they turned everything over to Whirlpool. So about every week someone comes out and fiddles with it and tell me it is fine. 2 days later the same. I have owned many Whirlpool products and never have I been so disappointed. Their service has been neglecting and I don’t know how anyone would want to buy Whirlpool. They have set me up another service appointment with S&S Appliance. Obviously I have bought a lemon and no one takes any responsibility. Good luck with Whirlpool!!

The front of the stove gets so hot you can burn yourself and I feel it is not safe around small children or grandchildren, and it should addressed to fix the problem not just cover it up. Please give me the info to fix the problem before I have to sue over my grandchildren and great children getting burned.

Bought Whirlpool refrigerator in October 2014, model WDT710PAYH6. Ice maker never worked right and then started leaking water. A month later it is still not fixed even though it is supposed to be under warranty. I bought a Whirlpool dishwasher and stove at that same time -- both of those needed to be replaced right out of the box! Called Whirlpool and they wont replace. Only referred me to a different repair company. Meanwhile it is leaking all over the floor. Now I see all these complaints for the same issue, yet the Whirlpool rep says they know nothing of this problem! I have a brand new Whirlpool matching microwave that sits uninstalled. I am wondering if I should even bother. I bought expensive new appliances to avoid the hassle of older items possibly breaking down -- and I have never been more frustrated in my life.

Out of warranty, slab of ice forms every few weeks in bottom of freezer. I have to take a butter knife and chisel it out to prevent having to defrost the entire freezer. This is clearly not isolated as after reading online and this forum, it is a manufacturing DEFECT that should be fixed at no charge to the consumer. It was delivered and installed by the retailer that sold the brand - however it sounds that Whirlpool would rather lose customers to other brands - trust me I just bought a stove and bet your sweet behind it was NOT a Whirlpool. Neither will the replacement for this piece of crap be once I can scrounge up the money.

The inside glass of the oven door shattered. I have not used the oven for months. Only the the top cooking burners have been used. Its a mystery to me!! I have read complaints where the glass shattered while the oven was in use or being cleaned, but have found none where this happened to a cold oven. The large front burner is too hot. Even on the lowest setting everything burns. You cannot simmer, only boil. The control knobs have (in my opinion) no safety mechanism. I thought that the control knobs on stoves needed to be child proofed, hard for a child to turn on. My last stove you had to push down quite hard then turn to the setting. Not this stove. I have to be so careful when Im cleaning the area around the knobs. The slightest pressure and the knob turns. When I first purchased the stove while cleaning it, I unknowingly turned the knob and the kitchen filled with gas before I realized what had happened. I called Whirlpool thinking something was broken. They sent out a repairman. Nothing was broken. That is the way it is made. Customer Service said they had had no other complaints about the knobs. I find that hard to believe. My toddler grandchild can turn on the stove with ease. Im sure other concerned parents etc. have had this complaint. To sum it up... I will probably never purchase a Whirlpool product again.

Bought a new oven for my new kitchen. Two weeks after install, I had to have it repaired. Less than 6 mos. later, it is being repaired again, for the same problem. Whirlpools policy is to fix it till the warranty runs out, then not their problem. Buyer beware, and if you do buy, make sure you get the extended warranty.

Cabrio - In Dec 2013: Ran the Clean washer cycle and it would not cut off. I had to shut off manually. Called the company and they sent a technician, who said he fixed it and that everything was good. Fast forward to Feb 2015: Tried cleaning the washer again. When I left the house there were 10 minutes left in the cycle. When I arrived home 7 hrs later, the washer was still running and my hot water heater had cut off. I had to reset via the circuit breaker. This will be my last Whirlpool appliance for a long while.

This stove is a joke. The range gets too hot even when you have the setting on low. The oven now has started becoming hot when its not turned on. Goes up to 245 and its scary. I have to turn off the breaker to ensure it gets cold again, but Ive had to do that every day for a week now. I will be calling Whirlpool to file a complaint. I have small children and Im scared my house will catch fire or have a unnecessary increase in my electric bill.

Stainless steel, easy to adjust, cools very well installed in a RV instead of standard RV fridge. Took a little bit of carpenter work to make Whirlpool fit but well worth the effort. The only problem I have with the fridge is that whirlpool wont honor the warranty because it is installed in a RV.

It is a new model side by side with water and ice maker. The temperature is very uneven, inside it has surprisingly little storage room in both fridge and freezer. Very difficult to fit food in due to awkward spaces. Would not buy again or recommend.

Most dissatisfying experience with Whirlpool. In 2013 I bought a stackable Whirlpool washer and dryer. Everything worked well for two months, and then the washer started having problems. The washer memory board unit (MBU) needed to be replaced. This was done under warranty. One and half years later I started getting the error F07 which means an electrical problem. I called Whirlpool and they told me a technician would cost $85 for a service call. I delayed the call until today.The technician came, did a diagnostic and then advised me that I would need a new MBU. The cost plus labour amounts to almost the cost of a brand new washer. To add insult to injury, Whirlpool advised the service call would cost $89. (They upped the price since my last call.) You can imagine my shock when the technician told me that the $89 covers the first 15 minutes. I paid $133.34 for one half hour diagnostic testing and to be told I need a new MBU which is on back order for at least 6 months!!! My recommendation is - NEVER BUY any Whirlpool product ever.

Purchased 2 years ago from Lowes with the matching dryer. This machine (Model #WTW8540BW0) has more problems than the Bosch front load that I replaced. All of my white clothing gets small rust colored lines on it. I am sure this is because the top of the bleach dispenser is lined with rust. I have never owned a washer that rusts (screws are also rusty). I will NEVER purchase another Whirlpool product.

Whirlpool Duet 2009 Model WFW9400SW02 - Worst experience ever with a new Whirlpool front Load washing machine. It broke down with error codes F28, F70, F71 13th month just after warranty and was leaking water. Bought 1 yr 153.00 Whirlpool extended warranty. Many reviews in internet have same complaint. Immediately had it repaired after waiting my 60 days to use warranty, but did not work after the door latch switch and one of 3 main circuit boards was replaced which was over $600.00. That was 2 visits. Fired them and had warranty company send different repair Co. They came twice with a cost of $840.00 and worked for 30 days and then had no power. 3rd repair company came out and wanted $350.00 to order part. I was offered $1195.00 cash or $1499.00 replacement top of line Whirlpool WFL98HEBU. Nice! But only 1 year warranty and I had to pay 200.00 shipping. I decided to take the money since I did not want to risk the break down on the new washer. The reviews on the new washer were not favorable with break down as the main complaint. 4 repairs in 1 year is lemon law on my warranty. My repairs were 4 in 45 days.

Whirpool Part #WPW10564292 refrigerator handle - I am a property manager who has 264 units. We have only been open for 1.5 years and have had to replace 30-40 door handles because they crack at the top where screws are. We tried calling Whirlpool Customer Service because obviously this is a defect and she said they looked in the system and didnt see any recall or issues. We also asked for a representative from Whirlpool to stop out so we could show them the issues and she said we have nobody in the area. We have 9 service requests outstanding that need a new refrigerator handle. On July 19th, we ordered 3 handles from our distributor and we were told theyre on back order until September 6th. When I called at the end of August to make sure we were on schedule with delivery, I was informed they are now on back order until November 5th. I just called our part rep. this morning and now they said the current part number does not exists and gave me the new part # W11026870, and they are on back order until mid or end of November. I am not going to keep quiet about this issue. We have paid $79.89 per handle on a refrigerator that is only a 1 to 2 years old appliance. I am requesting a returned call or email on what you are going to be able to do for us. This is not right or fair to a company that spent a large amount of money to have your appliances in 264 units.

Called 8/24/15 - spoke with representative about our two year old washer. Nothing Whirlpool can or will do.They have no other complaints about rust inside the lid and inside rim at bleach dispenser nor chipping of paint from lid. When asking the Whirlpool representative about the rust, he assured us there were no other complaints.This is hard to believe since our recent research clearly shows that other brands have had to replace tops due to rust. As for clothes not cleaning, no response to this issue. Whirlpool has not trained salespersons and therefore at the mercy of Lowes hard sales tactics and we were very delinquent in researching numerous complaints before purchasing Whirlpool Cabrio Platinum Model WTW8240YWD - Ranked lowest possible from ConsumerAffairs with hundreds of complaints. Whirlpool should be ashamed of product - clothes do not come clean, there is no soak cycle, no way to open mid cycle without losing all water, washer smells horribly, must be cleaned - are you kidding? Who cleans the washer that is supposed to clean clothes with a special cleaner?? We understand safety issues of water in open machine, wonder if Whirlpool understands the need to have a soak feature to clean clothes. Undereducated buyers like us and the totally undereducated salesperson at Lowes were obviously a horrible combination. It was all about sales for them. No one mentioned and we had no clue that the huge drum would not clean clothes even using less water than a traditional machine. We thought platinum meant a high quality machine. It clearly was a cleverly used buzz word for sales not a premier cleaning machine. Never, never, never purchasing Whirpool anything again. Wonder if Whirlpool cares, if they read the ConsumerAffairs reports, if they respond. Our hard-earned money is wasted. Our clothes are dirty, the washer smells, and the top is rusting out!

I bought a Whirlpool washer (model wtw57esvw1) about 17 months ago. In that time, the same part has gone out three times. It happens every 5 to 6 months. The part runs 97 dollars plus labor. In the mean time, I am without the use of my washer. They say they are sorry, but they only cover their product for one year. After that, you have to buy their extended warranty so you can get it fixed by them. I feel that if I pay that much for a product I should expect at least 3 years without having to repair every 6 months! I have no washer. I am giving one star only because I have to.

Whirlpool Gold Microwave Hood Combo GH5184XPS4 purchased new on 12/2009. The plastic vent cracked where clip attached by factory installed screw. The vent fell off microwave on 10/2011. I spoke with Whirlpool customer service. It is out of warranty and recommended to buy new vent part ($40.00). The new vent broke once again on 12/2011, clip attachment location. Now, the plastic door handle is cracking. The customer service is sorry and recommends to buy replacement parts as long as they remain available. There are many reports of similar instances noted online. I live in a newly constructed condominium where multiple owners have had the same problems with their Whirlpool Gold Microwave Hood Combo GH5184XPS4.

I purchased a lot of Whirlpool appliances -- washer/dryer, dishwasher, microwave, and now a Whirlpool stainless steel refrigerator. This was approximately the end of 2014. Not long after I purchased the refrigerator, the front started with small rust stains. I notified Whirlpool and all they said was call Scratch-b-gone in California. My refrigerator should have been under warranty. They offered no other help. I live-chatted this morning and they say the same thing -- call another company. You are now out of service. Im so very disappointed in Whirlpool and will definitely rethink purchasing another Whirlpool appliance. My other stainless steel appliances are not having a rust problem -- just the refrigerator. I havent tried the Scratch-b-gone yet because on their website they say that a lot of Whirlpool products have a coating on them. VERY, VERY unhappy with Whirlpool and their customer service...

I purchased a new French door refrigerator in May of 2016. Professionally installed. Last May 2017 icemaker stopped working and was replaced. June 2018 icemaker stopped working. This part of the refrigerator is poor quality and because of that I will never purchase another Whirlpool appliance. They use to be good quality and dependable. Not anymore.

When doing any cooking on this range, there are ALWAYS brown or black marks on the white enamel. When I try to clean it using the methods recommended by Whirlpool, they will not come off and the top looks terrible. Using stronger things to clean it removes the finish. They state its not covered under warranty - I will not ever buy Whirlpool again... EVER! Buyer beware! Model #wfg510s0aw2.

My landlord purchased a new Amana washer (NTW4605EW0) Labor Day weekend 2015. It started having issues in the spring, so we went through the process of utilizing the manufacturers warranty. Apparently, Amana, part of Whirlpool, requires 5 attempts at repairing the machines before replacing. Okay, so starting in June 2016, we arranged service appointments 5 times and replaced 1 part, then another, 4 times. Clearly, that part is defunct. Right? Fast forward to September and then into October. Get a new washer, and not the one I preferred. We got the Whirlpool WTW4816FW1. Before the installers leave, we are having the SAME issue. Stops midcycle, doesnt finish cycle, sometimes stops while filling, or while full, or kid wash, or mid drain... But now with the new washer, the drain and spin cycle thinks it should FILL instead of drain... and Whirlpool said they would get someone out the next day, a promise they cannot keep because they dont supply the repair guy, they source with local companies. So, the company ordered 3 parts... That could be the problem. And 4 days later, 2 parts are on freaking BACK ORDER. Parts arrive. All new parts replaced. Machine still doesnt work. Outlet tested by us and them and it is fine. The techs think there is some kind of RF interference. Turn off sensor light, which is on the same wall, unplug power to wifi router (which outdates the washer). Still, doesnt work.I have spent half my week, every week, since June, restarting my washer, unplugging the damn thing, waiting, and waiting, trying again and again and again to wash 2 loads of laundry a week... Literally takes a week until the damn thing does its job. Whirlpool is sent us a replacement washer. Can you guess what happened the first time we started it? SAME ISSUE. Cycle will not complete. Sometimes it dies before it even fills. Sometimes it dies while filling. Sometimes, it will fill and fill and drain and fill and fill and drain and... never stop filling. Or, the fun one, the drain and spin cycle thinks it is suppose to fill. Continuously. And then, suddenly, after unplugging it for 1 hr, or 24, or 72 hrs, it will work fine for 1-7 cycles. Nothing is consistent except that it doesnt work consistently. HAS ANYONE HAD THIS MUCH TROUBLE???

I have purchased a 3 door Refrigerator of Whirlpool on 27th October, 2014 from Sargam India Electronics Pvt Ltd. Now my refrigerator was not working properly. So we registered a complaint regarding same. On 3rd July your one executive came and he asked that its compressor is not working and we have to refill gas also and charges will be 2000 rupees for Gas and compressor is under warranty. Then on 4th July your another executive came with compressor and he worked for 1 hr on fridge then he asked, Compressor is not taking load. My senior will come tomorrow, mujh se nahi ho raha. On 5th July morning we got a call and he asked that he will come till evening. Now we got a call. They are asking that its not under warranty. Hum log paso mai dhik kar sakte hai. When purchased in 2014 last ist thing its under warranty only they have told us for 10 yrs. And we have purchased 4 yrs + back not 5 yrs completed. Apart from your customer service guys we never shown this to any one else as its under warranty, I am clearing this thing on prior notice. Senior are not taking action. They are asking we can do it in money. They are asking, If you want to go consumer court you can go.

I bought a Whirlpool Partner II 5 and a half years ago. It was always noisy and took very long to run a cycle. It started to malfunction after 2 years. We bought a new computer for it and a new control panel for the touch keys. It still kept not running a cycle fully. We found a YOUTUBE video that showed how to reset the model by pressing a combination of Normal and Heated Dry and that seemed to fix it for 2 years.It has stopped working again. Now it seems that the heating element is out. It doesnt clean at all, a scum film has covered the inside of the dishwasher and even mold spots are appearing. Ive had to wait extremely long times on hold to talk with an agent. My option is to hire a repair tech to come out and repair it and I pay for the parts. Seems like a bad deal since Ive already spent over a hundred on repairing it and a lot of hours. I will never buy a Whirlpool brand appliance again.

We purchased a high end KitchenAid Refrigerator Dec 2018. Rust developed on water dispenser door in less than year. They would not honor warranty. Since March we have had ongoing cooling problems with 5 service calls and 4 different fixes and unit still doesnt work. Local authorized service company, Fields, in Jacksonville FL is incompetent. Whirlpool doesnt return calls. The products value is not consistent with the high cost. Here are the gory details. Ref: Setzers, Jacksonville FL (sold unit). Fields Jacksonville FL (factory authorized service company).Less than 1 year in, it began to rust. We called for a Warranty check. Fields Appliance (their factory authorized service company) came out and agreed all 5 doors needed to be replaced. A month rocked on, finally we called to find out where the doors were, and were told Whirlpool (Makers of Kitchenaid) denied the claim. Citing that we lived near the coast! Well, our other appliances arent rusting and the refrigerator doesnt sit outside! They sent us a 6 oz bottle of rust cleaner. A few months later, this refrigerator stops cooling! This was in March, 3 months out of 1 yr warranty. The refrigerant system is warranted for 5 yrs. This was also right at the beginning of Covid 19 shutdown. Fields could not give us a appointment, due to shutdowns. So, I called a local company to fix it out of pocket. He discovered a leak in the coolant lines, fixed the leak and replaced the coolant ($453.61 on 4/9/20). Great, it works! About 3 weeks later, it stops cooling again. Called local service repairman out once more to see whats going on. He replaces a thermal bi metal sensor and well ahh! It works again ($100 on 4/28/2020).About 3 weeks after that, it stops working again! We are thinking by now, its a problem for Setzers, Whirlpool, and Fields. We call the local service repairman out to confirm and he states that the evaporator fan motor will need to be replaced, and that part replaces all sensors as well ($59.99 5/28/2020 service call). We call Setzers and schedule an appointment with Fields. First appointment we could get was 6/16/2020. Guy comes out, and cited a factory defect, per a technical bulletin he had, and relocated a sensor. Simple as that, he assured us it was fixed! Even though I pointed out it felt no cooler when he packed his things to leave. It did nothing! In the background Setzers (when they would call back) were supposedly working with Whirlpool to help fix the problem! Whirlpools reply was that since our repairman was not factory authorized, it completely voided our warranty! Explaining we had no choice, since Fields wouldnt come out and by now we are without a working refrigerator for 3 months, they could care less! Feeling totally frustrated, we call Fields again! On 6/19/2020, they send out another repairman. This guy came in, opened up the back, and immediately stated the refrigerant was overfilled. Didnt do any diagnostics, just told us that we were **, and walked away, without even putting the refrigerator back in place! Neither Fields rep hooked up a diagnostic tool to confirm any real issue, I guess they just knew! Total incompetence! So... As of now we have paid the local repairman ($448.33 on 6/26/2020) to order the evaporation fan motor and install it this coming Monday (7/20/2020). Total amount out of pocket at this point, $1053.90. It took that long to get here! Wish us luck! Setzers wiped their hands clean of the issue and told us to call Whirlpool. We did have not ever received callback.

This Whirlpool side by side 2 door Refrigerator/Freezer stopped working yesterday. It was manufactured in 04/2013, and I purchased it from Lowes on 5/26/2013. My invoice number is **. The last 2 refrigerators I have owned worked for well over 20 years each. Actually, longer, but I moved away from one of them. It is unbelievable to me that after 3 years, and 3 months, this unit has just stopped working. Of course, it is coming at a horrible time. In addition, it is summer time in Southern California, so the heat is high, and the desire for cold drinks and foods is also. It had been working well, until yesterday. Today, I am experiencing the foods become warmer and warmer. I will not be purchasing another Whirlpool Product of any kind.

Three years ago I bought a bottom freezer Whirlpool Gold refrigerator from Lowes. Two days after it was installed, I noticed a pool of water on the kitchen floor. This happened again. I called Lowes and they brought out another refrigerator, same make and model, and took the first one away. A year later the same thing happened. I had it repaired - quite an ordeal for the technician. He had to order a part and found it difficult to actually get into the freezer. Now after a year and a half approximately the same thing is happening. I cant afford to continue the repair bills and dont like the inconvenience (what if this happens when Im away from home?). The pool of water is substantial - its as though the defrost is simply emptying through the front of the freezer onto my floor.

I purchased a Whirlpool Duet washer in Jan. 2011 and there has been 3 problems. There has been water leaking, loud/banging noises during the spin cycle, and torn clothing. Technicians have visited 4 times in 7 months. At this point, I forsee more problems in the future. I spoke to a supervisor at Whirlpool and I asked if the washer could be exchanged. I was told, If it is repairable then we will continue to repair it. I was also told that I could purchase an additional 1 or 2 year warranty. A comment like that makes me believe that the company foresees problems in the future as well. A company like Whirlpool should realize that customers should not have to spend time leaving work early or taking off to meet with a technician about an appliance so often or at all! I have owned a washer in the past but it was left when we sold the home and I never experienced any problems!

N40T61-343 Whirlpool Hot Water Tank - Purchased this hot water tank and had problems keeping lighted. This hot water tank has never worked correctly, every week the burner needs removed and cleaned or the flame burns under burner. The wires burn up and you need to buy a new burner. I have bought two new burners and am fed up trying to have hot water with this Whirlpool unit. The gas company has been here three times, they blame a poor design.

I purchased two Whirlpool refrigerators 9 years ago and this year, 2018, both of them died. Bad compressors that cost up to $700 to replace. Repair folks would not guarantee them as there could also be other issues, like leaks in the internal parts of the refrigerator. I have a 20 year old frig (Kenmore) in my garage than runs great, no repairs and is in a non heated area. My conclusion is that that Whirpool reduced cost by making cheap products.

Bought a Whirlpool refrigerator from Lowes 5 months ago. Already had a repairman out two times. The refrigerator is defrosting out on the floor. We are constantly having to change towels to catch the water. The last repairman said it could be fixed and started the procedure to get an exchange since it was still under warranty, but now Whirlpool is saying they still want to fix it even after we were told we were getting an exchange. These people are crooks and put out low quality merchandise, then dont back it up. I have seen complaint after complaint on the reviews. Whirlpool needs to be put out of business.

Oftentimes when we take out the dark loads there is a white line left. It appears to be detergent that does not go into suspension. We are using HD. Just lately we switch to liquid. Question in our minds is if it does not move the water enough to put the detergent in suspension, how in the world is it even cleaning? I do not see the turnover of the clothes. Where is the quality control with this?

I bought a Whirlpool range. After 15 months, I hadnt even paid it off yet the oven stopped working properly and then again after two years. These ranges are junk. Dont buy Whirlpool! They dont stand by the product either.

After having our refrigerator for a few months we noticed rust on every stainless steel panel on the front of the unit (6). After customer service sent a technician to look at the unit nothing more was done. I was just told to try and scrub the rust off.

I purchased a Whirlpool dishwasher from Home Depot on 2/5/2015. It was delivered damaged on 2/9/2015. Home Depot refused to take it back and Whirlpool sent a tech out to see the damage. I told them I did not want a refurbished dishwasher that I paid almost $1000 for. Whirlpool advised Home Depot that the machine can be repaired. Once again I told both whirlpool and Home Depot that I did not want this dishwasher and to pick it up. Home Depot stated that there would be a 15 percent restocking fee along with a $65 to pick up the washer. Why should we have to pay anything? I am so disgusted for the treatment I received.

Quiet running, does a great job cleaning and drying the dishes, experienced some cloudiness on the glassware but found that if I position them in the middle of the upper rack that issue was solved.

The washer and dryer, Cabrio, machines are not even 4 years old and Ive had to repair four different things! Literally just replaced idler pulley today, went to put a load in wash and F1 code appeared. Control panel, 350.00 for whirlpool or a technician to repair! 285.00 for part. I called Whirlpool and was not offered any apology. Never again will I purchase Whirlpool crap appliances!

Whirlpool with four burner and the model that you self-clean the oven. It had all the features I wanted and Whirlpool has been around for a long time. Cost was right for my budget and it had all the options to it. I would have to move it out from the wall to find the model. Love the oven and the fact that I dont have to use caustic cleaners to clean it but simply have to wipe the dust out. One burner does not work and I will have to get it repaired. I shopped at a scratch and dent sale. The price was right and I could barely see the scratch and it had all the usual warranties. I need moderately priced appliances and if there were expensive features on it that I have not previously used, I would probably decline it. I do basic cooking and do not need expensive accessories. I can on my range and I have found the burners do not hold up well for canning. The burner I use for canning is the only one I have had problems with. That is the only problem I have had with the range at all. If anyone plans to can, consider purchasing the coil that is heavier to sustain the weight of the heavy canner. I would not be afraid to purchase Whirlpool again. My range is about 10 years old and other than that burner, I have had no difficulty. It is a mid-price range.

Dont buy this washing machine. All of my clothes are dingy and gray. I paid $1,751.96 for this set. What a big waste of money. Sometimes the clothes come out with dry spots and then some come out with lint like they have gone through the dryer and yet they are coming out of the wash. Often they are in a very tight large ball in the center of the machine. I distribute evenly around the machine and I dont overload. The brilliant engineer that decided the machine did not need a soak cycle is a person that has never washed clothes. Wish I would have taken pictures of some of the soil still left on my clothes.

I am sure this will be removed quickly... But my advice to my fellow consumers is do not purchase Whirlpool appliances. They do not stand behind their products and they are a nightmare to deal with. I purchased my range (Model WEE730H0D50) May 8, 2017 and from that day the oven never work (the board was out on a brand new product). They arranged a service tech to come out 3 times. Each time the service tech discovered the replace board was damaged. So I have not been able to use my oven since I bought it in May. 3 months later now the stove top stopped working. You would think after all these issues they would replace their product. But nope I have to wait 2 weeks to get this lemon serviced again... I have young children at home which makes things worse...

Whirlpool Cabrio Washer - A total waste of money. My clothes are never clean. The low water system is rubbish. It doesnt work! Check out my pictures below. That is the result of a 63 minutes wash cycle. Dont buy this piece of crap.

We built a new home at the beach to enjoy our retirement and the builder installed new Whirlpool appliances. As far as we are concerned this was the BIGGEST WASTE OF MONEY WE HAD. Our appliances were under warranty for 1 year as usual and after 14 months things began to break. The latest is the ice maker in the French door fridge. After finding the diagnostics test online I ran the test and determined that the whole ice maker needs replaced. This ridiculous since the fridge is only a little over a year old. We even upgraded the fridge to avoid any problems. After talking to the people in our neighborhood we have come to find out that most people here have had trouble with whirlpool appliances.. I am ready to send these to the junkyard and replace them with a reputable brand (LG) that we owned before and were very happy with.. I dont understand if there is all these problems with Whirlpool products why the technical team doesnt fix the problem... Get parts from the USA NOT CHINA!!! My neighbor just told me he had the repairman at his house 7 times to fix his fridge and finally got a new one. Just got tired of the hassle and expense....

Not as big as appearance would indicate. Very disappointed in actual usable space. You have to open both doors to get anything but the smallest items out. Had unit for less than a year and had to get freezer door seal replaced. Glad we got the extended warranty.

I dont think I ever bought another product where one of its highlighted feature does absolutely nothing. Using the Aqua Lift cleaning process is a waste of time and electricity. We were told this range had a self-cleaning oven when we bought it. If a self-cleaning oven is important to you buy something else.

My Duet Sport washer drum is damaged due to the poor quality of the bearings. I replaced the Whirlpool Duet Front Loader Washer Bearing & Seal Kit W10253866, W10253856 but because the bearings were damaged the drum is also damaged. When I opened the rear panel of the washer the bearings had literally come apart and bearings fell out. All of the floor and the oil/grease was everywhere. I replaced the bearings but it didnt matter because the drum is warped. Priced the drum and it is nearly $400.00 to replace the assembly. The cost of the drum assembly is about half the cost of a new washer. I will never buy another Whirlpool product again. Just a shame that the cost of a replacement drum is so high. What caused the bearings to just explode and damage the drum. What did I do to cause this? Absolutely nothing. I have since discovered that this is has happened to scores of people with this same washer.

I purchased the Whirlpool Gold series cook top range-stainless steel. It is of good quality and looks very nice. It is also easy to clean and for the price it has a self cleaning oven. I didnt think that I would like this range but over a period of time I truly love cooking on it.

The machine starts shaking uncontrollably, has to be paused and clothes redistributed but still shakes. The stabilizers were replaced approximately 1 year ago. This worked until today. I was was washing a small load and distributed the load accordingly. On the spin cycle, the washer again began shaking and I shut it off. I will never buy Whirlpool products again!

We have already filed a complaint but could not get any satisfactory reply. Our washing machine is not working properly & we are very angry with your service. It has created a lot of problem to us. Kindly do something regarding this.

I have double door Whirlpool refrigerator 1.3 years old. Since last 1.5 month I face problem. 4-5 times their technicians done visit. Following observations done by them: 1st visit problem - Water run away from back side bucket. Solution - Due to atmosphere moisture. 2nd Visit - Cooling fan not working. After 2nd visit refrigerator not worked. 3rd visit - Compressor fail. 4th visit - replace compressor. After replacement, refrigerator outer surface become heated. Skin will burn if anybody touch refrigerator. Problem still continue... I pay 2000 rs to Whirlpool as per companys norms. I lost my frozen, milk, veg., fruits etc. of approximate 1000 rs.

In June 2003, I purchased a Whirlpool Gold Conquest Side-by-Side satina finish refrigerator (Model Number: GAS6SHAXLL03; Serial Number: SP1452552). The ice-maker has always had freezing up issues which I never complained to the company about. It has made weird noises (nothing major) but was already out of warranty. I paid $1,600-1,700 for it. I did not have the money to pay for repairs and I am sure that the repairman would have never found the problem. Two days ago, there was an electrical smell in the house. After an hour or two, it started getting stronger and stronger so my husband looked at the fridge. There was smoke pouring at the back of it so he pulled it away from the wall and we unplugged it. Surprisingly, the plug was not hot. Had I not been home, it could have caught fire, burned the house down and killed my dog! I am furious about this. When I called, Whirlpool says, That model is not under a recall. Would you like me to transfer you to service for repair? Really? Those big corporations dont care! There needs to be a recall on this because I have seen this same problem many times on blogs and forums. Well, guess what, I used to be a Whirlpool fan, not anymore! Now, I went and purchased a new refrigerator, and the brand name is Samsung! I recently bought a Samsung front loading washer and dryer and they are great. It looks like the Whirlpool dishwasher in my kitchen will be next! I bet Samsung makes a nice dishwasher.

I apparently am one of the lucky ones to have an electric water heater. My unit started giving me failure codes during the Christmas holidays. Each time it would fail, I would get a different failure code indicating the upper element, the lower element, and a sensor failure. After testing all 3 of these components, it was determined to be a controller issue. After speaking with Chris on the phone, he overnighted a new controller to me. I installed the new controller and had no more failures. Hot showers for New Years! Thank you Chris.

I bought this washer on 2-28-09. By 3-12 the thing took a crap. The whole counter balance broke off away from the drum. This washer lasted 3 years and 1 month. What a piece of garbage. I expected this front loader to last a lot longer than 3 years! Of course when I called Whirlpool they said, “Well its not under warranty so you can buy the 1-yr warranty for $300.00,” and theyll come out and fix it for me. If Im going to pay $300, I might as well buy a new machine! I only paid $600 for it and to last 3 years is pitiful. This is defect in workmanship if the machine breaks in only 3 years. I told her that something should be covered because it should last longer than that. She basically said “oh well”. Oh well, I guess I wont be buying another Whirlpool again. Steer clear of this Duet Sport machine!

Please do not buy any Whirlpool product. Worst product and customer support. I got a new refrigerator on dec 2020, just after 1 month I started facing issues. I complained about that and 3 times they changed many parts. Still I am facing same issues. It doesn’t cool, makes too much sound. Every time I have to spend 30 mins in registering a complaint and sometimes they just close it on their own without even attending to it. So weird. Though the product is under warranty, it’s been more than 6 months that nobody has rectified the complaint. Even now my complaint is still pending. If I call customer support, they just provide some number and ask me to call them. Service representatives take their own time and not at all Serious about complaints. This kind of service they provide to customers. Beware of buying whirlpool products. Worst ever products and service.

This is a good looking, inexpensive stove/oven. Stove top has four burners. I liked the split grates on the stove top. Its easier to remove and clean. I do not like the rubber seal on the oven door. I am used to the heavier duty seals on most oven doors.