Washer has rusted out after only four years. I bought my set from Sears, and thought I would get good use out of it for many years; but I am experiencing rust falling from around the rim of the washer. Very dissatisfied with the product, I will never buy another appliance from Sears again. I have always used Sears appliances but after this experience I would not recommend Sears to anyone. I was told that the warranty was for one year, and the rust would not have been covered anyway. Very Dissatisfied Consumer. I thought Sears would stand behind their products. Yea, right.

I purchased a range top from Lowes and a month and half my burners go out. I call Whirlpool and a service technician came out. Said that he cant repair the stove because a bug had burned out the burners and he cant repair the stove. I call Whirlpool and they told me that voids my warranty with them even though my stove is not even two months old that will not repair it and I will have to pay for it to be repaired. I asked Lowes and they told me that they only take back big appliances back before 30 days. Now I am stuck with a stove that I paid 700.00 for that does not work and I have 4 children to feed. I am sickened on how Whirlpool can do this to a hard working family that just wants a good stove. I hope this helps another hard working family. Do your research before buying from Whirlpool. I wish I would have.

Whirlpool Microwave WMH1164XWS-1 - Well, Im sure surprised that my almost five year old Whirlpool microwave failed to heat this evening. One minute it worked, next it didnt. Watched countless repair videos, but it seems more aggravation taking the unit out and trying to diagnose the issue than its worth. Probably the same with enlisting the services of a repair tech. Ill probably think twice about purchasing another Whirlpool microwave. I purchased a Whirlpool French Door Refrigerator a few months ago and now Im concerned Ill have the same issues. All my appliances were Whirlpool and purchased ten years ago and replaced with newer models, even though I never had any repair issues. Guess they dont make them like they used to!

We purchased a 4.8 Cu FT High Efficiency Front Load Washer in February of 2016. What a nightmare. Just a few months after having it, we kept getting an E3 error message that would not go away. After 2 weeks of waiting before a tech could come out there replaced a door mechanism said it would be fine. After the next wash same thing, same problem. Could not even open the door to get my laundry out. Again they could not get a tech out for at least 2 weeks so Im stuck with the cost of getting my laundry done elsewhere. This time it was the motherboard. Had to wait a week for that to be shipped out. This was all completed in June 2016. We are now the beginning of September and same problem. Again we are told at least 1-2 weeks to get a tech out. Seriously Whirlpool, we are your customer. I have a family and we need to wash our clothes. We spent $1200 on this machine only to have to take our laundry to a public laundry mat because your machine keeps breaking down. They will not replace the machine even though this is the 3rd time with the same problem. The customer service is horrible. They are not willing to help in any way to get this fixed much sooner for her or give us a new machine. This one is obviously a lemon! I will never purchase any Whirlpool appliance again and I suggest based on some of the reviews on here no one does. Next appliance I buy I will do more research for sure.

I purchased a Whirlpool dishwasher from Home Depot on 2/5/2015. It was delivered damaged on 2/9/2015. Home Depot refused to take it back and Whirlpool sent a tech out to see the damage. I told them I did not want a refurbished dishwasher that I paid almost $1000 for. Whirlpool advised Home Depot that the machine can be repaired. Once again I told both whirlpool and Home Depot that I did not want this dishwasher and to pick it up. Home Depot stated that there would be a 15 percent restocking fee along with a $65 to pick up the washer. Why should we have to pay anything? I am so disgusted for the treatment I received.

I bought my Whirlpool dishwasher, model #WDF560SAFMO in Nov 2016 with a 2 year extended warranty. In Jan. 2021 it quit working, was told by repairman that the dishwasher needed a new pump. Of course, it is no longer under warranty. To replace the pump will cost almost as much as a new dishwasher.

I got a new Whirlpool dishwasher and it is totally unacceptable. Its supposed to be energy efficient and the eco setting, which is supposed to be the most energy efficient, takes 3 1/2 hours and does not do a good job, doesnt dry the dishes. Ive tried all the settings and some take over 4 hours. I have talked to someone at Whirlpool twice and they say thats the way it works. How can anyone put out a product that doesnt work and get away with it? I had my last Whirlpool for over 12 years and it took not even an hour and did a wonderful job.

My Whirlpool Cabrio Washer is a bucket of junk. I bought the washer in about 2008. I was smart and bought the warranty for approximately 3 years. Since I bought it, I have had them replace 3 water pumps, the tub, the computer, and it still knocks and shakes. It also leaves small frayed holes in my beach towels. This machine should be recalled. It needed a warranty from day one. Washer cost $1,000 warranty every year $130.00 per year which covered the repairs at about $900.00 for repairs. I hate it. I just hate it. I can’t stand it anymore. I need a new washer, someone has got to listen.

My Whirlpool washing machine has not worked properly from the first day. Whirlpool washing machine customer care is pathetic. I bought a Whirlpool semi-automatic washing machine, Sparkle. This product is in warranty period. From the first day, this product did not give right result. Machine sound is very high and I called customer care center may times (around 9-10 times). They sent this machine three times in service center but the results remained the same. The problem arose when we put some load in it. He said the gear box should be changed and the machine should be cleansed off the dirt. He offered some powder costing Rs. 1500/- to be used in washing machine.Later, he asked Rs. 350/- for other parts after two months then I paid them again after 15 days for a piece that did not work. Then, they want to charge me Rs. 350/- again. When I showed the previous slip, they then changed that part without any cost. But after 15 days, again same problem occurred. They charged me 150/- Rs. but the problem is the same. Total money I spent is Rs. 1500/-+350/-+150/-. I also purchased a stand and cover for safety, but what will happen if product is not good? The technicians visited many times and they all said this piece is not okay but they cant do anything. The company should change this product. The machine is still rotting at my home. Im not sure if it could be accepted to be exchanged for a new one. Customer care gave us the satisfaction code but technician did not ask for this code. Im really very sad that I have called around 10 complaints within two years. Why are you people not listening? You all are doing time pass. You can check my complaint codes in your records and ask your technicians about Noida. Many times, I did not note the complaints number. Please open my file and check the issue. I told the technician many times that I want to talk to your seniors and want to tell them the problem because from the first day, it was the same, but they refused. I have also purchased a 320 LT fridge from you but that product is very nice. You should listen to our problems. This was not expected of such a branded company. I promised myself that I will never in my life purchase a Whirlpool product and advise the same to others.

Washing clothes is a nightmare. I am constantly removing clothing from the washing machine that have been torn and left with holes. I am utterly frustrated. Because the machine is more than three years old, there has been no solution to my problem. I have now replaced clothing items in excess of $2,000. I am always here that they will send a repairman and yet there is still the problem. This machine is costing me too much money. The newer machines have fixed the problem. There is no gap between the drum and the doorway or rubber piece. I want that piece to stop this nightmare. This machine has taken a dream of mine and demolished the experience. I hate washing clothes but more so having a machine at home and then going to the laundromat to stop the chaos with doing laundry at home.

Bought a side-by-side with extended warranty model ED5VHEXVB01. I had a problem with the ice door. They came out, said they saw a bug, left no comments made, received no word from company. Finally, I called them to be informed on the bug problem. They canceled my warranty with no refund given. Now this will be the 3rd time I have to buy. The starter/overload relay fridge is only 4 years old (out of my pocket). I was told by a parts company this problem the company knows about and will not resolve. My advice is RUN, DONT WALK, away from ALL Whirlpool appliances.

I love my new stove!! It cleans so much easier than my old one. Would recommend whirlpool to everyone. You cant beat the price for a Whirlpool because it will last way over a decade. My mom has one too and she said, Get a Whirlpool Lyn because they last so long and she said after 10 years hers still looks new!

Refrigerator stopped cooling... Paid $200 to have it diagnosed... Cost more than a new refrigerator to get fixed...$14,000. Refrigerator was 7 years old, energy star. How can it be energy efficient if it was made to last only seven years? How much energy is wasted making new ones to replace the broken ones, that cost too much to fix. Energy star. What a scam.

This washer has no agitator. Drum will shake back and forth while load of clothes will stay in the same place sliding towards the opposite direction of the movement for 20 minutes. Clothes are not turning, no going up or down, just staying still and not getting washed as expected. Baseball cap and construction worker jeans didn’t washed as it should have been.

These products (Dishwasher, refrigerator, cooktop, and wall ovens) are less than 5 years old and everyone of is in of repair. The cooktop and wall ovens the repair on them would equal the price of a new one. I feel that the products should last more just a few years and also their warranties. This tells me they do not stand by quality of their products.

My complaint no. ** date 11/07/2014 till date 06/08/2014. Its noted solved by services department after 100 calls by me. They Reply no parts available from company so if you buy washing machine, be careful about Whirlpool washing machine.

I purchased a Whirlpool Duet washer in Jan. 2011 and there has been 3 problems. There has been water leaking, loud/banging noises during the spin cycle, and torn clothing. Technicians have visited 4 times in 7 months. At this point, I forsee more problems in the future. I spoke to a supervisor at Whirlpool and I asked if the washer could be exchanged. I was told, If it is repairable then we will continue to repair it. I was also told that I could purchase an additional 1 or 2 year warranty. A comment like that makes me believe that the company foresees problems in the future as well. A company like Whirlpool should realize that customers should not have to spend time leaving work early or taking off to meet with a technician about an appliance so often or at all! I have owned a washer in the past but it was left when we sold the home and I never experienced any problems!

I bought a Whirlpool Cabrio washer on 11/07/10. I brought it home, hooked it up, turned it on and water came pouring out the bottom. I should have known better then, but I took it back and got another one, same model. I dont even have it 2 years and its locked up. I had a repairman here and was told it needed a new water pump ($200 plus). There are 3 adults in my home so its not like I use it hard. I am really disgusted. This is the 3rd washer I bought from Whirlpool in less than 10 years. I went on the Whirlpool site and voiced my disappointment and my problems with their washers. I was told they take pride in their products and I should have a nice day. Yeah, right, they dont have to drag clothes up and down the stairs and then to a laundromat when theyre in their 50s with a bad knee and back. Yes, I will have a nice day when I get that piece of junk out of my house. I will never buy anything made by Whirlpool again.

The product has water and ice maker problems. The day we got the new refrigerator home, it did not make ice for one week. I called and had service come out. The line was not connected properly under the refrigerator. Water was flowing out of the front of the refrigerator. I called service again and they put in a new ice maker. The ice maker was still not working. I called service and another firm came out and said the new ice maker was bad. They put in another new icemaker. Now it is making ice but will not dispense it through the door like it is supposed to. I will call service again on Monday.

They attempted to fix our fridge, 1 year into owning, claimed no parts available. Never fixed, fridge died. Refused to repair. Offered us a 15% Visa gift card on another Whirlpool. Unacceptable, they can’t fix their product, and will never recommend anybody go through my familys $3,500 wasted fridge experience. Don’t trust them, they lie, and just escalate it to another liar in the customer service department.

My 1 year old Whirlpool top loader is an absolute nightmare. It does not complete cycles. Stops all the time with various error codes. My washing comes out soaking wet. The pipes on the inside comes loose and floods the house. The machine stops all the time with all the washing clogged on one side of the drum. It is a 16 kg capacity machine but you cannot even think of putting 8 kg laundry in there. I will never, ever buy any Whirlpool product again. Cheap scrap! Thats what it is.

I bought my new ceramic top electric range/oven with convection, and the aqua-lift cleaning system in spring 2017. The aqualift cleaning function is a joke, so be prepared to be down on your hands and knees scrubbing. Im careful, and Ive not spilled anything yet, but the oven still gets splatters from roasting meats, etc. Id hate to see what Ill have to deal with when I actually let something spill. Today, as I was down on my hands and knees trying to clean it, I noticed that the enamel is chipping off where the oven racks slide in. Great. I have never had an oven where the enamel came off, much less within a year. I am struggling with heart failure, and I am not up to fighting with Whirlpool.

It’s just a month old not even - and the dishes are not coming out clean. The cups are stained and I don’t feel it’s clean as it should be given it’s a brand new machine. I would not recommend this particular brand in Dishwashers.

Bought a Whirlpool French Door, Bottom freezer mount appliance from Lowes in Jan 2014. Model WRF990SLAM00. Jan 2015 the freezer part stopped working. Whirlpool approved repairman came and knew exactly the problem because he was aware of this being a consistent issue with Whirlpools. He contacted Whirlpool and they quickly agreed to send repair kit for FREE. Took 2 wks for parts to arrive, and neglected to send along required tool/gauges for repair to occur. I called Whirlpool C.S. and they claimed they knew nothing and said our fridge was on no problem list. I had repairman call Whirlpool and they claimed appropriate tool/gauges are no longer available! This fridge is only 1 year old!!! Now we are completely ignored. Whirlpool will not even talk to us about help of any kind. HORRIBLE customer service!!! Crappy appliance! After thinking our Whirlpool appliances were a good investment, I will NEVER EVER BUY WHIRLPOOL AGAIN!!!

There are plenty of reviews on this board already about how the so called AquaLift technology for oven cleaning is completely worthless so I wont repeat what they have already so eloquently described. AquaLift has managed to take us back in time to around 1947 or whenever it was before the old easy off oven cleaner was invented. I purchased the cleaning kit (affinity) as well but it doesnt do much of anything. The only people who might consider purchasing a stove with AquaLift are those who do no roasting or broiling of meat. The oven looks beautiful, so maybe it could be for those who enjoy a show kitchen and prefer takeout.

We have had this dishwasher since 1983 and we still run it on an average of 6 days a week. Features are the fact that it has given all of our dishes, our silverware, our pots and pans sparkling clean looks for all those years. It fits nicely into the kitchen space which was designed for a dishwasher. It never needed a repair. After all those years, this machine still looks fine. After all those years I really doubt if it still has a warranty and it never needed service.

When doing any cooking on this range, there are ALWAYS brown or black marks on the white enamel. When I try to clean it using the methods recommended by Whirlpool, they will not come off and the top looks terrible. Using stronger things to clean it removes the finish. They state its not covered under warranty - I will not ever buy Whirlpool again... EVER! Buyer beware! Model #wfg510s0aw2.

I purchased a Whirlpool Microwave on 9/21/10 from Hamilton-Bryan in Wichita Falls, Texas. I had a small fire in my microwave on 9/19/11, due to a faulty mica board. This was replaced by Mr. Bobs in Wichita Falls, TX, under the warranty. Then on 1/9/12, the microwave would not warm anything. I called Mr. Bobs again, and they said the transformer was out. I called Whirlpool, and was told by Yvonne that Whirlpool would replace the part only, with no labor, but Mr. Bobs was closed, and to call back in the morning, so this authorization could be set up with Mr. Bobs. I called back and there was no record of my call with Yvonne. I talked to a supervisor Rachel in Tennessee. She put me on hold for a while and finally said she found Yvonnes note to authorize the part. I explained to each person I talked to that I was dissatisfied with Whirlpool. I believe I have a defective microwave. I would like my money back, or a new microwave. I believe the defective mica board is related to the defective transformer. I am a very dissatisfied customer. I have used Whirlpool most of my adult life. I have used them since the 1970s. I currently have a Whirlpool refrigerator, washer, and dryer. A similar situation like this occurred when I bought a Samsung washer. I was dissatisfied, and Samsung refunded my money, and I bought a Whirlpool washer to replace Samsung. I will not be satisfied with this situation, until the microwave is replaced. Thank you for your concern and attention to this matter.

Machine wont go through the whole wash cycle., Wash, Rinse, Spin. It stops and shows an error message and then I have to keep rearranging contents, over and over. This is worse if you try to wash a small load.

Aqua clean does not work. I purchased this range this year not knowing aqua clean was different than a standard self cleaning. I had not use the range since its delivery in June until Thanksgiving. One meal in the oven and the turkey had created staining on the sides and the bottom. I have run the self clean cycle so far four times and scrubbed till I’m blue in the face. The greasy stuff does not lift off and the warranty voids if you use anything else. Have already contacted the dealer to see if I can return this!

Has multiple wash Cycles. Big enough to wash a comforter. Has a delay setting so I can set it 8 hours in advance. Easy to load, easy to add the wash ingredients. Its a top load so its easy to get everything in and out.

Sounds crazy, but the outside of my stainless steel door is all dented. I live alone and one day noticed that it looks like someone body slammed my fridge. Is there air in the door panels that could be escaping or something like that? Anyone hear of this?

I purchased this Whirlpool washer (model WTW7600XW2) on October 2011. Fabric softener dispenser is full of water at end of cycle. Repairman has replaced parts three times, but the problem is still not corrected. Today, I talked with a Whirlpool supervisor. She says this is normal. She told me to take the cup out and empty it. The cup is not removable, so she said I could blot it out with a cloth or sponge. I paid $800.00 for a washer with an automatic fabric dispenser that I must empty manually. I have used whirlpool appliances for 50 years of marriage, but this is my last one. I am very disappointed with customer service.

Whirpool WFW9550WW-00 Front Load Washer - Washer was purchased 08/09/12. No problems until 07/12/15 when washer stopped working mid-cycle. Motor control board needs to be replaced, actuator needs to be replaced. $500+ Our local appliance store suggested we call the Whirlpool customer relations number and ask for the parts to be sent free of charge. We would pay labor. They gave us the model number, serial number, the diagnostic info. Long story short, customer service told me she didnt know why I was told to contact them. They can not predict the life of a machine. Less than 3 years for this machine. 22 years for my old Kenmore. Our old Kenmore never had a problem, but we thought that we should replace it in 2012 in case something happened with old machine. WISH WE KEPT THE 22 YEAR OLD KENMORE.

Purchased washer and dryer in 2013. After several months I noticed small holes in my clothing. I called for service since my machines were still under warranty. There was nothing the repair service could do except make suggestions on water amount and settings. Which I tried with no improvement. I also contacted Whirlpool and was told I could call for service for several weeks since it was still under warranty. I asked why call for service when I was told it could not be fixed. I did have it serviced again and told it was a problem with the design. Numerous items of clothing were ruined which I showed the technician. He gave me a phone number to contact Whirlpool. They in turn said there was nothing they could do for me. I usually place items in laundry bags for delicate fabrics but for obvious reasons not all items fit in a bag. I have never had such terrible service nor experienced an appliance that operates so poorly. I am surprised there are not more complaints with this problem. Purchased from ABT because of their reputation for customer service.

I bought the Whirlpool Gold Series dishwasher on November of 2014 from Home Depot. The first thing that happened was that it started to leak. I called Whirlpool and someone came out to look at it. It took about a week for them to come. They said it was installed incorrectly and they do not handle installation issues. They left. I took the dishwasher out and reinstalled according to the guide. It still leaked. The dishwasher had to be perfectly level before the leaking stopped.The next issue was that the dishes were not getting clean my dishes. The top rack was the worse. I called Whirlpool again. They came out, took the dishwasher apart and said the part called the diffuser had become dislocated. He placed it back into its proper position and left. This was April of 2015. The dishwasher did an ok job. Some dishes still came out with food on it. By the end of 2015, close to the warranty expiring, the top rack was no longer being washed. I took the dishwasher apart from the inside and found the diffuser was not in the right position again. So every time I want to run the dishwasher I need to take the spray arms out and the racks until I have access to the bottom of the dishwasher to reset the diffuser. Now the warranty was expired, Whirlpool wanted about $150 just to come look at the dishwasher. Sears wanted $59. So I called Sears. Their tech said the dishwasher has a broken motor. For Sears to fix it would be around $400. I called Whirlpool. I felt that the motor was already broken within the warranty period and that the problem finally got diagnosed now. Whirlpool felt this wasnt the case. Their price to fix was also close to $400. Now I need to buy a new dishwasher and throw away a one year old dishwasher. Only this time I will buy the extended warranty. Overall, poor product, poor customer service, and poor warranty coverage.

Does clean well but I notice that even on heat drying there is still water on the inside of the door when I open it. I have loaded it up and even the glass baking pans came out sparkling. I would recommend this middle of the road priced dishwasher.

Initially felt the burners and oven took a LONG time to heat up, but just accepted it. After a year and a half, the motherboard died. The part alone was almost $400 and labor $100. The self clean does not work very well. Glass top is very hard to clean. It has a large oven space and looks nice, but would avoid Whirlpool at all costs following this experience.

I purchased a front loader Whirlpool Cabrio washer/dryer in June of 2011. I was sold an extended warranty which ends June 30 of this year. I have made 4 calls to the Co which warranties the washer because it is making squeaking noises on the spin cycle. I was refused service because the customer service rep didnt “hear” anything. I finally had a local service Co check out the machine and was told the motor needs to be replaced and if under warranty I should demand it be replaced. I called again and still cannot get NSI to come out and see the problem.

Need to arrange shelves for better storage!!! Ive not had any major problems with it so far!!! I need the rubber seals on the freezer and refrigerator door replaced!!! Other than that its alright!!! Im hoping it lasts for a long time!!!! On disability and be hard to replace!!!

I contacted Whirlpool in regard to one of their water heaters we purchased from Lowes. It came with a 5-year warranty. At the end of 3 years, the lower element went out. Our plumber took the part back to Lowes, where he stated they normally just do a part replacement with them. On ours, he was told the owner would have to contact the manufacturer. I contacted them and supplied them with the plumbers bill and copies of the front and back of our canceled check, along with all my contact info. Their website states theyll get back with you within two days. I contacted them on March 13, 2013. Today is April 7, 2013 and they havent emailed, called or snail mailed me. After reading these consumer reports, the air has been let out of my balloon. No more Whirlpool products for me! Integrity in our country used to be extremely high. Today it is extremely low as demonstrated by the complaints on this website and now mine. Hey Whirlpool, you suck!

We have had a Whirlpool hot water heater for 6 years and 14 days. Note the 14 days. It has been nothing but trouble and we have called the company repeatedly for help. It finally stopped working altogether 14 days after the warranty ran out. Thank you Whirlpool for nothing! It had a filter on the bottom of the heater that constantly had to be cleaned which was next to impossible. We had to buy a special brush to try to reach it. My husband had to take it apart several times a year and clean it to keep it running. Whirlpool should have replaced it within the first year but instead offered many suggestions about cleaning and etc. so they would not have to replace. Today it is out of my house for good and I would advise anyone reading this to beware! Horrible product!!!

I purchased by first Whirlpool Cabrio washer in 2007 with an extended warranty (my husband did not want me to buy). Thank goodness I did. The machine had repeated issues to the point that the service repairman and I were on first name basis. Finally, the mother board went out. The rust on the sides was excessive and of course my expensive sheets and towels were being shredded. Lowe’s extended warranty plan did honor this and replaced my machine with a new Cabrio washer (big mistake!). The new machine; receipt for this was over $1,600.00, including the new extended warranty that ends in 2014, was bought on 3-25-09. It now requires a new drum and bearings which are being replaced today (9-19-12); however, the corrosion is just as bad and my clothes are still being shredded. Oh, also the lid no longer locks and to get the machine to actually run. I have to physically hold down the lid until the lid locks. The repairman said that there is nothing he can do as the company will not repair this or replace the machine again under warranty! The joints where the lid attaches have rusted through and that is why the lid cant lock. The whole lid needs to be replaced and the company says it would cost about the same as a new machine about $690.00. What a rip-off this company is for the consumer! I will never, ever deal with Whirlpool again and I mean never, ever again! (sans Taylor Swift)!

I bought a washer and dryer a couple months ago. The washer has been completely replaced already. It is a piece of garbage. I have to wash my laundry four times and still my clothes are not coming out clean. I have three small children and it is just a pain to always be washing their clothes. Things as simple as orange juice not coming out of a shirt even using bleach. It was sold to me with high efficiency and great water consumption but of course it is, it doesnt use any water to wash the clothes. I had a tech come out to look at it and even they said its had so many complaints about how it washes. She said that the wash machine is the worst out there and I totally agree. If you cant wash baby clothes and get puke out of a bed sheet then I could just imagine grass stains. Wash machines don’t last forever but I can promise you I will never purchase another in my life. Best part of it is when whirlpool was approached, did absolutely nothing about. Basically said, “Have a good day, thats what you bought, thats what you get.” Considering its still under a year warranty. Tell me I will never buy a whirlpool again and I will never recommend one to anyone who asks. The customer service and product dont stand anything against other manufactures. I learned my lesson the hard way but Ive opened my eyes. Never purchase a top loader. Word of mouth travels fast. I know my complaint probably means ** to whirlpool but for what its worth, Ill be spreading the word around.

On Aug. of 2013, purchased A Whirlpool refrigerator with ex warranty to find out the bottom freezer door started to RUST!!!! They said it was not covered????? WHY!!!!

I purchased both the Cabrio washer and dryer because my dryer stopped working, it was old, and I knew that soon the washer would too, and wanted to modernize my set -- it was my moms old set. I was thrilled to get it delivered and should have had the delivery man from Lowes take it right back, when he told me they had just come from picking up one from another lady who was thoroughly dissatisfied with hers.Well, it didnt take too many washings for me to understand why that lady was upset! I really wish I had done the same thing! EVERY load of dark clothes have to be wiped off to get off the disgusting wet lint thats all over the clothes! Thats been going on since DAY 1! In every load, the clothes do not get completely wet and I thought I had combated that issue by having a pitcher of water always available to pour onto the load, so the sensor will add more water... That doesnt work, I now see!!! I just noticed last night lots of wet lint was on my fabric shower curtain liner, and I was thoroughly upset! I just never feel as though anything I wash gets clean. I truly wish I had come across this site BEFORE I purchased my set, and I would never have done so. Is there ANYTHING that can be done for people who have purchased these horrible appliances?

We purchased this machine new and took delivery on 5/21/11. We did not start using this until late August of 2011. In late November we noticed a loud noise from the washer. When we contacted the sales company that sent out a repair person who informed us the bearings were defective. We have been told the parts are on back order for another 2-4 weeks. It has already been 4 weeks since they were out. Whirlpool was no help. They first claim we must have overloaded the machine, then relented saying that things happen. Either way I am without a washing machine we paid $1000.00 for another month; yet they will not extend my warranty at least for the time my machine is down. I am now worried about the damage that this unit may have caused to my new home due to water leakage, let alone the added expense to due my laundry since I must now use a service to provide for a washing machine I own.

I purchased a new style topload washer (Whirlpool) without the center post approximately one year ago at Lowes and have had nothing but problems with it since day one. It does not clean the clothes and will not spin.

I purchased a Whirlpool French door refrigerator model # gx5fhdxvyo4 in June 2011. Four months ago, ice was forming on the bottom of the freezer. Repair person replaced a clogged plug leading to evaporation tray. Its March 2013 and repair person now has to replace evaporator motor part # W10128551. I contacted Whirlpool and was told the warranty has expired (one year). This repair will be around $175. How can I trust a Whirlpool product in the future?

3 years old and not cooling again. Enough said! For the 2nd time the refrigerator stopped cooling and was told it’s no longer covered and I would have to call service and be responsible for repairs 2500.00 later. I will be shopping for another refrigerator.

Our Whirlpool Duet front loader washer developed a mildew smell and started making a horrible banging noise on the spin cycle. We had a service man come out and the concrete weight had broken in half. He said this was not uncommon. I just did a Google search and apparently this is a true factory defect. Luckily we had purchased an extended warranty. I always thought Whirlpool was a premium brand but after this experience I will never buy another washer from them. They should do a product recall.

My mother-in-law purchased a Whirlpool refrigerator in 7/2010. It broke down the first time in August then consistently after that. We have had repair people out multiple times and the issue continues. I called Whirlpool and they said since it was purchased more than a year ago, it is not their problem. You would think that in all that time they would have found a way to repair or replace it. To make matters worse, we have had to call hospice in to care for my mother-in-law, all she wants is to get ice and water out of the door.

HORRIBLE! I purchased a Convection Oven Microwave in Oct. 2010 and 3 months later, the microwave stopped heating! I called customer service and they replaced the magnetron and two other parts. Two months later, the appliance broke again with the same problem. They serviced it again. Today, it was broken again and the service technician stated that its the magnetron again. I called to get it replaced and they said Whirlpool doesnt replace appliances, they just keep servicing it. **! How can they get away with this!

Whirlpool WRS965CIAM - Consumer beware is what weve learned. Whirlpool has apparently not monitored the hundreds of complaints about this particular refrigerator model. Its sleek and pretty and has a ton of features and I was very excited about purchasing it. We havent moved into our home yet, but turned the refrig on the next weekend after closing, started painting rooms, even had some nice ice water. I came back next day to a very large amount of water all over my hardwood floors. We are talking bath towels. Who would know you are supposed to call Whirlpool directly? We sure didnt. We called Hart Appliances, where we purchased it from. They gave us a number to call for service on Monday. The repair guy came, didnt have what he needed, so he came back later in the afternoon and fixed it, until we came back next morning and the floor was again flooded... Again, we are talking bath towels. I called them back and was told it needed a part, that took 4 days to come. Its here today but they are not coming until Monday to fix. Customer service at Whirlpool has no record of calling out a serviceman. They wont have info until problem is fixed. According to folks on the internet sites, that could be months or never! Okay, ladies... am I ever going to trust that this refrig will ever be fixed? I wont dare go away for a weekend without fear it will leak all over my floors and ruin them. We were going to purchase a chest freezer and small full fridge for drinks and overflow to keep in the garage. Instead, thats where this fridge will end up. Expensive lesson learned. Whirlpool doesnt replace brand new, out of the box, defective refrigerator. Whirlpool also doesnt admit there are complaints out there... Customer service person told me she had no record of complaints... I said when we get off the phone... GOOGLE WRS965CIAM and you will be amazed. My next complaint is going to Consumer Reports. We bought the magazine and followed the advice. Id like to think we just got a lemon, but there are too many complaints out there for that to be the case!

Updated on 02/13/2021: Company fails on customer service. My stove’s trim is rubbing off on my Whirlpool stove only 6 months old. No chemicals were ever used to clean the surface. This trim piece surrounds the controls and is not covered under warranty. An expensive cheaply made stove. Multiple attempts to have the piece replaced got nowhere. A letter sent to the head office was deferred back to customer service. Whirlpool has lost credibility and I will no longer buy their products.Original Review: So disappointed to find the paint finish coming off the trim on my 8 month old Whirlpool range. No harsh cleaning chemicals were used. Only mild dish soap and a microfiber towel. The trim, attached to the control panel on the front of the stove, is not actually stainless steel, but painted to look like stainless steel. Whirlpool warranty doesnt cover esthetics and refused to replace the trim, stating replacement would include the entire control panel and it is not covered under warranty. So be prepared to have your new expensive stove look old in a matter of months.

Where to begin? I bought Whirlpool Duet Front-Load Washing Machine about 11 months ago after my top load bearing went bad and start making a lot of noise after 8-9 years. 4 months ago (6 months from purchase) it started to act strange; washing machine will not unlock after a cycle, start throwing F3E1 error. Thats when I first called their support service. Their service technicians are very nice actually. They seem to be local small appliance shop, contacted out by Whirlpool, from my guess. Initial visit was to inform me that Im using WAY too much soap, while I was only using well below what was recommended by Whirlpool manual. RED FLAG #1. Technicians told me to stop using too much soap or start using POD. Also to flush my washing machine with 2 cups of white vinegar in hot cycle every few weeks. Ive changed my soap to Tide POD and starting flushing my washing machine immediately after he left my house. It was running OK, but I still saw F3E1 error at the end of every other cycle, until... thing went really bad one day, it simply stopped responding any command while clothes was still in the washing machine. I unplugged power cable and plug it back, it hums for 10 mins and in the end it was the same result. After several attempt, it finally unlocked itself, thus I could wash my clothes at my parents house. This is when I called support service 2nd time. The same technician came and this time, I had video recording of everything. He could not dismiss this with simple soap theory, so he opens up the washing machine and tells me that its due to bad control board. He proceeds to order new control board, which took a few weeks. New technician comes back with new control board and installs, runs a few test command (not full cycle) and leaves. During this whole time, Im left with no washing machine at home. Good thing I travel sometimes and laundry is done remotely sometimes. This repair didnt improve the situation much. I called them back for another appointment. Another technician comes back and tells me that Whirlpool sent back BAD control board. Now, Im really suspecting their product is really piece of **. At least at this point, I was still happy with their service. He leaves my house claiming that they will order new control board and re-install.A few days later, I receive a call from a lady, claiming that Whirlpool has instructed them to ask me to use different outlet, since they believe my outlet is causing issues. Now Im really pissed. Coming from electrical engineering background, I know theres always any chance, but they should double check this with their own technicians. Anyways, I perform their recommendation, which I knew was a shot in the dark. During this whole ordeal, Im working on a project that are out of state (CA). Not only do I have time to stay home for all these service visits, but Im not even home to test my washing machine. During one of the holiday, I was able to take a few days off. This is when I decided to take different approach. I went to the retailer, whom I purchased my washing machine from. They were also nice, but theres so much they can do.I called Whirlpool direct line to explain my situation, how unhappy I was, and to replace my washing machine. Their response was by the book: We can only execute our warranty policy and replacement is not part of warranty. The representative specialist had enough nerve to ask me why I have not called back in several weeks and continue to repeat it as if its my problem for not reporting back. I had spent 2 months of supports and 4 site visits, where I had to reschedule my work or take a day off, before travelling for projects after holiday seasons. This representative really took customer service to next level of hell. In the end Im without properly functioning washing machine for 4 months. I have to coordinate with my parents to use their washing machine when Im back home. My advice, you should really think 3 times before buying Whirlpool washing machine or any other appliance. Also consider that youre on your own, when their product malfunctions, and youll be sitting on dead appliances.

Duet Washer GHW9150PH0 - The washer is about nine years old. Last year I got the dreaded F-11 error code, and had to purchase a new controller board and install it. Now the spider arm on the basket has snapped (cast part). Ive been on the phone with Whirlpool for over a half hour now, and all I get is We have to send a service tech out, and you have to pay for them. I have the broken part in hand, I know the Whirlpool part number, yet they want me to pay for a tech to come see the part and confirm it. Ive been unable to talk to a manager yet, none are available.Eventually the lady agreed to replace the broken basket, after telling me at least five times she could not, but she refused to replace the tub which was destroyed when the basket broke. Ill be calling back to talk to another agent soon.

The Whirlpool engineers need to go back to design room sober on this machine. It is only a year old and still I have to run one load two sometimes three times just to get clothes clean. How is this energy-efficient? I have tried all of their so-called remedies. Paying such good money for a lousy and lazy appliance is hard to swallow!

Purchased this dishwasher in 2015. It has been horrible. The unit has never cleaned sufficiently on any cycle. I run the unit in the evening for the full cycle with heat. It takes almost 4 hours. The dishes are still soaking wet the next morning. We would be considered light use as a family of two. I hand wash any larger pans or cookware as the racks do not support anything of midrange weight or above.With the poor cleaning, I purchased a additional silverware rack and placed it more centrally to attempt better cleaning. It remains mediocre at best. The most recent irritation is the door latch has started pulling free from the unit and remains attached to the door! I have to take pliers and remove it from the door and reaffix it into the housing of the unit. Will never recommend this nor will I ever purchase anything from this company in the future. Sad to see the quality falter to the point of absolute failure.

The clothes have a stale and mold smell. The whites like tee shirts and shorts and other whites are a dingy yellowish color. The detergent that was recommended and pellets used every month do not work. I have called and complained several times and the operator said that she had one and it works fine, the other person said to wipe the inside of the washer and leave the door open after each wash and not to store the dirty laundry in the washer till next use. They never explained that you have to run a special pellet through the afresh clean washer cycle. Well, we have tried it every time and the clothes still do not clean and stink bad. We asked them for an exchange and they said no. Is there anything we can do?

Whirlpool Gold Bottom Mounted Freezer - I advised Whirlpool that the refrigerator has two design flaws... one that makes the drain freeze up and even more importantly what is involved in correcting the problem. They replied that they were unaware of the issue when its all over the internet and has been for well over a year... maybe more. I sent them a couple pages of internet links and they said they would advise their engineers. As they have done with others, they suggested I should have gotten the extended warranty but that hardly addresses the problem(s).

This is a great choice if you like a drawer for a freezer. It’s double door. The racks are easily moved. There’s are drawers for beverages and cheeses and vegetables. One downfall is replacing water filter cartridge every couple months and freezer could be set up a little better so you don’t have to pack things on top of each other.

Worst company for home appliance... I got my fridge repaired from an authorized service person and next day it again stopped functioning. Upon calling the service center again, they said that few more things needs to be repaired once again and for that fridge needs to be moved to their workshop and for that they will be charging 1600 Rs again. Upon asking for the refund for the useless spare part, the rude service person said ek din k liye to chale tha na fridge, fir kis baat ka refund... Such a ** company is Whirlpool that they are not entertaining any complaint on their all India customer care number...

I had my Whirlpool front load washer stop working all together. Well the pump went out it filled up with water and shorted out the circuit board/control panel. Was going to cost more to repair it than to just go get a new one. I will never get a whirlpool ever again.

I purchased this LOVELY top loader on May 19, 2012 - the lid is broken and wont stay up. I am 4 ft. 11 inches and I need a stool to reach the clothing at the bottom. Kind of hard to hold up the lid and scoop clothes with the other hand!!! Today, I discovered it is rusting from the inside out!!! From what??? Pulled it forward to clean the floor underneath and discovered it has rusted and corroded even on to the matching dryer - white finish!??! Guilty by association! AAAHHH!!! I wish I could upload the picture! Whirlpool and LEONs warranty - they have some explaining to do.

This machine is JUNK and in need of a recall!! DO NOT BUY!!! This was purchased at Lowes for nearly $800 a couple of years ago and what a waste of money. During the first year, they had to send out a tech that told me he was not familiar with top loaders and was not sure why the clothes were not getting clean, nor why they came out with a white residue on the dark clothes. We used the machine cleaner - which the cycles take nearly an hour (how is that efficient?), put in a load of dark clothes WITH NO SOAP and guess what? Then he had me dump in a gallon of vinegar to clean the tub and the wall of the washer and repeated the process and guess what? He informed me that it was just lint. Well, after several visits and using a suggested pin drop of soap, the problem remained. I finally asked him if he was so sure it was lint and not soap residue, would he be willing to taste the lint? It was soap.Obviously after an hour of washing in the efficient washer, the clothes are not getting rinsed. I know this because in just putting in less than ten dark t-shirts, they came out dry!!! He informed me that since he was a contractor for Whirlpool, he was not allowed to continue to come back as he resolved the problem that I was using too much soap! Well, that is only part of the problem. This piece of crap leaks. We not only have a water softener, but a household filter system. In just the last three months, we have replaced the hoses as they are corroding. We were informed by Lowes that the hoses that came with the washers were from China and that they have been replacing them with US made hoses to the customers at no charge due to the amount of returns. Well, those too have been corroding and now I once again have water on the floor.It cost $1.75 to take my clothes to the Laundromat, 26 minutes to wash and ten minutes to get there and back. That is what I have been doing, and using my 23 year old dryer when I get home. It is a shame that the company is not responding to an obvious problem. I only wash two loads in a week - not like I am beating the thing to death with numerous loads or heavy loads. I will not recommend, in fact, I BEG you not to spend your hard earned money on this junk. Buy a $200 washer and if it too craps out in three, four or five years... you are still ahead. You will even save money on headache medication and save your sanity.

I have had this front loader for 5 or 6 years. My clothes absolutely stick, I cant stand the smell of them. I have used Affresh, the recommended cleaner 3 days in a row, multiple cycles, no improvement. I did the vinegar treatment, leave the door open etc. What is upsetting is I have read Whirlpool has been aware of the mold and mildew problems of front loaders yet continue to manufacture them. The gasket in the front enclosure pockets at least a cup of water and other gunk from the wash. A waste of money!!!

Purchased a Gold Series Whirlpool dishwasher, Mo. No. WDT720PADW2, From Maruszcak in Schererville, In. on 1-29-16. Approximately a year later door was replaced by Whirlpool because of paint problem due to faulty design. Replaced door is now peeling and rusting by exhaust vent also. Contacted Whirlpool and they will do nothing more. They said it was a favor the first time they replaced the door. They feel this is a cosmetic problem! I paid a total of $675.03, Their repairman would charge a $100.00 to look at it and another $235.00 for a new door. I feel this is a design problem and they should replace it with a new model, a refund would be better. Very unlikey, because Whirlpool does not stand behind their products. The line also includes Maytag, Jenn-Air, Amana and Hot Point. Besides this I have found plastic pieces that have fallen off! I had to use plastic ties to keep them in place. Dishwasher does not clean well. Have to rinse everything first. Products are bad, stay away from them!

I bought my Cabrio Platinum Washer and Dryer in 2013 (4 years old). About a month ago, it started sounding like an airplane was landing in the house while on spin cycle. I called a repairman and he said the bearings were going bad and it would be better to buy a new machine. When we pulled out the washer, there was grease all over the floor - apparently a seal started leaking and the bearings had no grease so they started burning up. I talked with Whirlpool, after all it was only 4 years old and a seal leaking and burning the bearings up wouldnt be from normal wear. They were not convinced and offered to give me a discount on a new one -- No Way! I went with another brand recommended by the repairman. The screws on the dryer door also came out and we had to replace them. So much for the Whirlpool brand and especially their top of the line machines. I will not buy another Whirlpool washer or dryer.

We bought a Whirlpool range. The same day we got it the burner exploded and my electricity went off. I called the customer service to request a replace, they told me a technician had to go and look at it. They did. I had to miss a day of work as they come between 9 to 5 pm (will not tell you what time). The guy say the range is defective (really!??) and will need to request parts. I called them again (after 15 times you wait minimum 30 min each time). They told me they can replace the parts. I said I bought a new appliance not an use one. Money back. Told me somebody will contact me. Week later nobody contact me and still waiting 30 min each time. I called nobody answer my calls. I wonder I may get somebody if I wait hours? No idea. Please do not buy from this guys... They are bad in all the way.

We purchased a top loader Whirlpool Cabrio Platinum Washer and within a few short months noticed a mildew-like smell emanating from it. This is DESPITE the fact that we leave the top up the entire time that the machine is not in use, we use hydrogen peroxide and ammonia in our loads of laundry in order to kill any mold present and my husband painstakingly hand dries the interior of the drum after each load of laundry. He also puts hydrogen peroxide in the fabric softener dispenser in an effort to kill the mold/mildew. None of this has helped to mitigate the ongoing mildew/mold odor. We have run across other online reviews which suggest that the Cabrio does not fully drain the water in the washer leading to the potential for the development of mold and mildew. This is very upsetting as we paid a lot of money for the Cabrio and had high hopes for it.

Bought fridge in 2010, I am about to replace the icemaker for the 2nd time at a cost of over $300 each time by a Whirlpool authorized repair tech. No kids in the house and very limited use of icemaker. Motor keeps burning out because of the design flaw per the tech. Very poor design for a $1,500 fridge. Due to these issues I do not intend on purchasing Whirlpool products in the future.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

I purchased a washing machine and dryer 1 year ago. Since then it has started to get spots on the control panel where you select size, temperature, etc. I also purchased an extended warranty through Home Depot and is still under warranty for 3 years. I was told for a few more days is still under man warranty. I contacted Whirlpool and they said it is not their problem and sounds cosmetic - I think this is unfair being that I spent a lot of money and it has started appearing on the washer and dryer. No one wants to be responsible. I am a consumer who is very careful and have not had any spills or cleaned it with anything.

Whirlpool WRF993FIFMOO: Refrigerator Problems: the doors do not close, both ice makers went out, The computer on the filtration will go off. Refrigerator had problems maintaining temperature since 8.12.17. The refrigerator no longer works. This is my second unit since 11.09.16. It came from nfm.com.

Ran Aqualift self cleaning cycle 4 times at 40 minutes and only bottom was cleaned, sides are still spotted and the rear wall still shows a heavy spotting. My stove is less than a year old. My prior stove with self clean at a higher heat was great, when done only had to wipe out!

NU40T61-403 have had problems since day one. First problem was while heating up would make loud humming noise. Whirlpool sent out plumber. He adjusted plate under tank. That worked for about 2 months. Then pilot started going out. They send same plumber out again, also sent replacement part. Problem was fixed however about 2 months after that started leaking and flooding our garage. Called company again, was told that is no longer under warranty and stated we need a thermal expansion tank. I stated “why would we need this? This unit is only a little over a year old. Im not going to purchase another tank. A water heater should not overheat like this.” Long story short my husband has been burnt severely from the pressure build up as he was out in our garage walking past the tank when it decided to release pressure even though no water was being used at that time. He ended up at the ER with 2nd-3rd degree burns. I called Whirlpool again and was only told we need to install the expansion tank. Im so unhappy with this product I will never buy anything made by whirlpool again.....

Whirlpool Gold model WRS526SIAHOO - We purchased this refrigerator 10/2013 with all the matching appliances when we remodeled the kitchen. We moved our 1997 GE refrigerator into the garage. Now the computer board has gone out in the Whirlpool and we are back to using the 97 GE. The technician told me that he sees a lot of these boards going bad.

Dont know the model but it is a basic smooth top range without self-clean option. Its easy to use. I like that it has a smooth top which is easy to clean. I didnt need to pay for the self-cleaning feature as I use an oven liner and clean it right away if I need to. When we went appliance shopping, we needed to replace all major appliances. We chose Whirlpool as we have had them before and they performed well. Also bundling a group of them allowed us to get a great deal.

Both are Whirlpool Commercial quality. I got them free from my Co-Op. They didnt cost me anything. They have been here for years - at least 18 years. They have performed flawlessly. I would look for anything discounted. I do not have a problem buying scratch and dent items or last years models. I am not big into brand names and their claims. My sister has gone thru several Maytag appliances in just a few short years. I will not buy any front loading washer, its top load only for me. The dryer has to be electric because we do not have gas in my Co-Op complex. I have been lucky to have only two washer and dryer combos since I was a kid. My family bought a Kenmore washer dryer combo in the 70s that lasted maintenance free into the 90s when I got the Whirlpool set that I have now. I only need the basics side by side set ups. Even though I live alone I do a lot of laundry. Since I have had these commercial grade machines I am more leaning toward another set of commercial grade machines. They seem to be able to take more abuse/over loading than the fancy expensive machines.

I find this to have perfect storage space both in the top for standard refrigerator and the bottom freezer. I would recommend this not for the style, the amount of room but also the quality. I have not been disappointed.

Bought a Whirlpool refrigerator December 2011, it is now 3 yrs. old, keeps shutting itself off. There is nothing under the troubleshooting area of the instructions for this. I called Whirlpool, they said I have to pay a tech to come here and troubleshoot. The warranty is 1 years, so after paying over 1k for an appliance, that gets you 1 year! I try to support American made, but no more Whirlpools here! I have all Whirlpool appliances, but Im guessing they wont last either. Very disappointed in the lack of customer service.

Bought a side by side whirlpool refrigerator last year. Door seal has come unglued so the door doesnt close unless press seal back in Every time we open the door. For the expense I would expect the door seal to last longer than a year.

French Door Model WRF989SDAWOO: Horrible quality, worse support! We have a new French Door (not inexpensive). Within 3 months of owning it, we phoned in because the unit was periodically making a very loud, metallic humming sound. We were politely told that noise was normal, and that if the unit was working when the service man came out, we would be charged. A few months later, the noise was constant, and we noticed that the temperature was not stable. Freezer was set to 0, Fridge to 36, yet the thermometer was reading 20 (freezer) and 38 (fridge). We called in, concerned that it was failing. We were put on a schedule for 9 days later. We were told we would get a call the day before with a 2-hour window when the tech would come. That didnt happen. We got a call that the tech would come between 8:00 am and 5:00 pm (he showed up at 5:35 pm).We phoned in 3 days later to tell them that we were losing food (freezer was now showing 29, fridge 40). We were told (by both Westinghouse and by A&E Factory Service, which is Sears) that we should rent another refrigerator. When the service tech showed up, the first point of contention was that we had Whirlpools warranty (and had paid for the extended warranty) rather than Sears Master Protection agreement. Nevertheless, the tech finds that there is a problem with the evaporator coil, which had to be ordered from the factory. The tech was nice, and told us not to wait to be rescheduled, but to call him directly, and he would come the business workday after we notified him that the part arrived. Another week without a refrigerator / freezer, and now we have to worry about what the tech told us; these units are NOT of good quality, and have had repeated failures in the cooling systems.

I have bought two Whirlpool water heaters and with each one have had the same problem: the pilot light will not stay on. I have to continually turn the pilot light on each day. I have replaced the entire flame/pilot/thermal couple assembly several times. Each time I use the unit, it works for about 2 weeks, then Im back to turning on the pilot light every day. Im convinced that there is an inherent design flaw that Whirlpool should be forced to deal with. It seems that this should be a fraud case to sell a known, documented, defective product. Shame on you Whirlpool! Its obvious that its all about the money! Band all Whirlpool water heater products!

I have had trouble with this AccuBake stove since four months after I bought it in 2011. First, the clean cycle would work intermittently then would not ignite to bake, broil warm or clean. All burners would light intermittently. Every time I had trouble, I called the service tech from Homestead Lumber, where I purchased the product from and he could never find anything wrong. Product would work fine whenever he came out. Finally, it acted up in May of this year while the product was still under warranty and while the service tech was here. The tech replaced the circuit board. One month later, Im still having trouble replacing igniter. Four days ago, Im still having trouble. This stove stinks. Right now, I wish I had my $959 back for the stove and wish Whirlpool had it stuck up their butt.

I purchased the Whirlpool Duet June 2011. Within two weeks, it was tearing my clothes. It didnt matter how little of a load it was, they still ripped. Five months later, my machine was leaking water. The repair man came out. I told him it was also tearing my clothes. His only response was dont load it to full. Well, I called the store where I purchased it and they are sending a repair man out again. I told them to either fix this from ripping my clothes or I was going to take a hammer to the machine and never buy a Whirlpool again or give them a good reference. I also called Whirlpool directly and told them of my problem and they acted like they had never heard of this happening before. I told them to search the internet because everyone is having the same complaint! I had a Fridgidaire front loader for 9 years and never had a problem with it eating my clothes.

The pilot of my Whirlpool hot water heater (model FG1H5040T3NOV) suddenly went out and I called in a plumber to check it out. He managed to restart the pilot and we had hot water again, but it went out again within 12 hours. He mentioned that I would most likely need a part called a thermo coupling and I should start looking for it. Well, I found this site and read one of the positive reviews that provided the WP toll free number, so I called. Talk about great customer service! Ben was amazing – he took down all my info and was very helpful. Even though the warranty expired years ago, he overnighted me the replacement parts I needed at no charge. And there’s no charge for shipping either! My plumber is completely anti-Whirlpool HWHs and now he will change his mind when I tell him how efficient they are. I also hope he doesnt charge me a bundle to install the replacement part.

I bought this Whirlpool Duet Sport washer and dryer, and I have had to constantly bleach out because our laundry smells like mold. I found out that Tide sells a special cleanser for this washer so I have been using that for the past two years. It did not really help. Well, today I accidentally put laundry soap in the wrong dispenser, so I took the dispenser out and was horrified to find mold that was all in the back where the fluid is dispensed, I mean way back in there. I have been suffering with sinus problems, and swelling in my eyes and face. I even went to the doctor, but no one has figured out why. I now know it is the mold from my washer making me sick. Well, my son and daughter-in-law were staying with me, and commented on how bad it was when they used my towels. I am stuck with a $1,600 washer and dryer that is making my family sick.

We purchased in July 2016 from Best Buy. Very nice product. Our former Whirlpool had lasted 20 years and was a work horse for our family. The new one began not freezing ice cream in November. Then, it would periodically freeze things very well and then not freeze items fully. We contacted Best Buy thinking we had a lemon. Worthless - no help. Told us to contact Whirlpool directly. The repair person came out today and told us that our refrigerator cannot be in our garage outdoors because the energy efficiency of the refrigerator causes it to shut off when the surrounding temp drops below 54F. Our former Whirlpool had been outdoors in our garage in that spot for 18 years, no problems. The new models now no longer operate if the air cools down around them. What!? There is no warning information, no sales information, no way to learn this until after you shell out 1000 dollars and lose your frozen food. It is in the manual in fine print, but we didnt read the manual cover to cover when we got the refrigerator, and we sure didnt read it BEFORE we bought it. And no one at the store, nor the installation people who represented Best Buy as paid installers told me I couldnt have this outside, even though I specifically told them I was buying it for our outside extra fridge and freezer to replace the old one, and the installers installed it outside. Technically our refrigerator is working as its supposed to apparently. However, I think it should prominently be noted on pre-sales materials that it must be operated indoors only (in climates always >54 degrees). Now I have a new refrigerator that I cant use as an extra in our garage. Apparently all the new fridges are energy efficient like this and shut off below 54. I cannot find any info on the internet about this, or any other complaints about a similar situation to mine. How does that make any sense? Freezing is 32 so any frozen goods will thaw, by default, always, if the machine is in cool environments. Phooey on this design spec. Dumb engineers.

Whirlpool Cabrio Elite - I wanted this washer and dryer set to be the best one I ever owned. =( It’s the most I ever spent on a set. I am truly very disappointed. The washer, it is twisting the clothes and sheets so bad. My clothes are falling apart a little bit each time I wash them. I tried so hard to load the washer the way they asked never putting in a full load. The dryer leaves things still wet around the corners and edges. Because everything gets so twisted I had to buy a iron and ironing board just to get the wrinkled out. I hate to iron.

I bought my refrigerator model #WRV986FDEM, in October. It has not made ice in over a month. I think its very unfair to purchase a product and not be able to use it. The technician has been out here twice and the situation is still not resolved. I understand that customer service is not a strong suit of your company but I am not a customer to be taken lightly. I paid almost three thousand dollars for this piece of junk and I want it to work properly. I find it unacceptable that the technician just left and the situation is not resolved. I will be posting my displeasure on every site I can today since I had to take yet another day off to accommodate you and your inferior product. ALL I WANT IS ICE from a fridge I bought 4 months ago. In the words of our illustrious president. Very, Very BAD.

The machine is two years old. It cost over $1,000 to buy. From the beginning, we have had mold issues with the machine. The entire house fills with the smell of rotten eggs every time we use it. The machine is used daily so it doesnt sit for long periods. Despite all the complaints online about their machines, Whirlpool refused to acknowledge that there is a design problem with the machine. They refused to make any repairs or buy the machine back and their only suggestion was to buy more chemicals from them to use to clean the machine. We have done this in the past to no avail. Oh, they did offer to send out a service company but on my dime. Whirlpool needs to be sued and I only wish that someone would start a class action suit against them. It really stinks when you try and do the right thing and buy American only to have the company not give a crap about their customers or the fact that their product is garbage. About 10 years ago, I had a Maytag front loader washing machine with the same problem. Maytag bought the machine back on a pro-rated basis, no problem, no question. Of course, Maytag is now owned by Whirlpool. Too bad they didnt adopt Maytags customer service policy. I cant wait for them to go out of business - something they deserve.

Refrigerator is only 4 years old and must be defrosted every 2 or 3 weeks as a thick sheet of ice forms in the bottom of the freezer. Also the appliance frequently emits loud cracking noises.

We purchased a Whirlpool Overhead microwave and Quiet Dishwasher in May of 2017. Within the first year, the microwave needed new sensors installed. The repair person said this was a design flaw and he was getting many calls. Then at 13 months, the dishwasher wouldnt drain. The repair person fixed the problem and left reset directions because this can commonly happen. Now at 18 months later, the drainage problem wont resolve even with the reset. Whirlpool extended the warranty by 6 months but wont cover this repair. Two appliances, two problems. Dont buy Whirlpool.

I purchased a Whirlpool catnip washer from Brandsmart in August of 2010. It worked fairly well, but would sometimes need for clothes to be rearranged in order for the spin cycle to complete. In June of 2013, it started to not wring the clothes out completely. It then stopped working. I called a repairman and got an estimate of $550 dollars, but I paid $578 for it.I called Whirlpool and spoke to the supervisor of the consumer concern team. She offered me a fifty percent discount on the parts for the repair. I checked the web to see if anyone else had any problems with this product and found several. I suggest you do your homework before purchasing a Whirlpool washer. I was positive they would do more, since it’s such a prestigious company.

Bought these Whirlpool Cabrio Platinum combo about three years ago, nothing but junk from the get go! Washer never gets clothes clean, towels always come out smelling mildew and sour no matter what liquid soap you use Tide, Gain, whatever same results. Plus always mold coming from inside tub and yes we use refresh weekly and wash it out on refresh setting. I’m so tired of our towels smelling sour but can’t afford to buy new washer and dryer living on fixed income. If I could these would be in the recycling yard now. From everything I’m reading all new H e machines are crap and energy efficient my foot. I wish for my old style washer and dryer. WHIRLPOOL YOU HAVE LOST A LONG TIME CUSTOMER!

I purchased this Refrigerator Model #wrb322dmb, bottom freezer, 21cu ft. last year on July 3, 2015. In September I noticed rust spots on the top door. I called Home Depot where I purchased and they directed me to Whirlpool. I did purchase an extended warranty with Home Depot. Whirlpool did replace the top door. Thought that took care of it. Today one year and two weeks out of warranty, I again notice rust on both doors. Called Whirlpool. They said too bad out of warranty, not considering I had a previous report of this very same issue. So since I am very unsatisfied with this result and the fact that an expensive product is rusting, I decided to share to try to prevent someone getting stuck. Stainless steel is not supposed to rust which leads me to believe that it is not Stainless steel, but a Stainless Steel finish and not a very good one. So I am stuck with a rusting $1200.00 refrigerator only after one year. I have always purchased Whirlpool, but no more. They lost a 40-year customer. I have always bought American made but no wonder people are not buying American made any longer. TO SUM IT UP WHIRLPOOL STAINLESS STEEL APPLIANCES RUST! DO NOT BUY!

Bought whirlpool Cabrio at Lowes. Would not complete spin cycle. Had Whirlpool Service Tech out. Seals were gone. Bearings shot. Rotor and stator from motor shot. Wanted over $500.00 to fix. Called Whirlpool and they did nothing. Spent $100.00 for the service call. Ive read all over the internet about similar issues. Never heard of 4-year old washer so badly damaged. Piece of garbage. Very unhappy and will avoid anything made by Whirlpool again.

I bought a Cabrio from Costo less than 2 years ago. Dryer so far so good (big barrel with hair dryer so what could go wrong?). Washing machine is HORRIBLE. Lid latch broke (couple hundred to repair). Now out of the blue I get an F2 error & machine is completely inoperable. I am only user & very careful with it. There should be a recall on this expensive junk. NEVER buy Cabrio or maybe any Whirlpool appliances again. Ive never written a bad review btw.