I bought a Whirlpool water heater 5 years ago and after one year I had to replace the thermocouple every 3 months. Each time I call to complain, they would just send me a new thermocouple. I asked them several times to replace the item and they refused and just continued to send me replacement parts and refuse to honor their warranty. The water heater had some type of defect, but they still refuse to replace the item and did admit on the phone they have records of several parts that they sent.

Dishwasher has had multiple issues in the 4 years of use. - Incomplete cycles - need to call repairman to figure out why the dishwasher does not complete cycles, fills with water but doesnt go into clean cycle - In 2 years had to replace grommet due to leaking water. - Top rack slide rail plastic ends broke needing to purchase both new ones. - Detergent door quit opening - door does not open during entire cleaning cycle.- Design flaw with silverware rack on the door, be careful not to block or silverware will not get cleaned.

May 16 - July 25, 2014. Took almost nine weeks to get the replacement. Numerous service calls. Their tech said self-clean feature should never be used. In addition, I heard that the techs are only paid for one service call, no matter how many times they come. And, they cant fix this oven. It has to be replaced. Nightmare and very dangerous. Most American families cannot wait nine weeks for a new oven to be fixed/replaced.

This is a replacement of a similar model, that lasted 23 years. This modest, white, 2 door, side by side refrigerator, was purchased without the optional ice maker. It was bought specifically for the dimensions, of our custom cabinets. There are obvious differences, from the previous incarnation. The textured doors were replaced with a smooth glossy finish and their height extends higher than the refrigerator cabinet. The adjustable shelves were replaced with less adjustable pre fixed shelf supports. The LED interior lighting is much brighter that the incandescent bulbs they replaced. Overall, so far a very capable refrigerator, for a moderately sized kitchen and if the life, lasts as long as the one it replaced, this was a very good purchase.

I have a Whirlpool Cabrio washer. It was great for almost year. After that it has been nothing but trouble. The body of the washer has rust coming through the paint and large areas that is so rusted that the paint has chipped off completely. A washer is expected to deal with water and not rust through the body. I have a 10-year old Ford truck without a speck of rust. Dont they undercoat? The circuit board has had to be replaced because of rust. I have to take several Q-tips and go under the cover to remove all the rust if I dont it gets rust stains on my clothes, which is impossible to remove. The customer service is non existent. They have left me on the line for over 40 minutes. I hang on only because it would be another hour or so of my time to get someone to answer. I was without a washer for a month while waiting for parts. Why dont they have parts for their products? I had to slop my way too dirty laundry mats 3 times a week as I do 2 to 3 loads a day.My washer is downstairs and stops and gives me the unbalanced message even when its not, running up and down the stairs several times to complete one load. I also get the F51 message for no perceivable reason. The extra rinse button only works 1/2 the time. This was an expensive washer ($1,000.00) and I feel that I deserve my money back. They are knowingly making an inferior product.

Purchased a Side By Side refrigerator just 16 months back and this is the Third time the ice maker has failed. Who makes JUNK like this?? Is there not One company that can make anything to last at least three years. I am disgusted with the junk we bought that has Whirlpool on it. I should Sue Home Depot and Whirlpool for Fraud.

Our double oven was part of our new home purchase so we really didnt have a choice in product. Brand new. Hardly used. The control board replaced because it went bad 2 weeks after install. After one use it had it replaced and it went bad again. Used it once and again same thing. My mom unaware of the issue used the self cleaner as a favor. Well things went really bad. Because the temperature of the self cleaner was too much for the oven and explode and the inside glass shattered. This is not a product that you would want in your home or would recommend for anyone to buy. They do not stand by their product either. Please do not risk your familys life.

We bought Whirlpool Frontloader Washing Machine not over 1 month ago and it started to malfunction showing Ed1 error on its display. We contacted the service center and it was taking too long to have a visit from a technician. Then the technician, who also installed the unit came and checked the unit. He called someone from corporate office or from support team to ask what is error code Ed1 and overheard over the phone that this is a known issue on the brand. The technician said it is possible that unit will be replaced or only the motor. I contacted the brand support thru Messenger and requested to have the unit replaced, because again, the unit is not over 1mo old.I was advised it is not possible as replacement of unit is only applicable when the issue happened within seven days of delivery. STUPID ISNT? Policy is something unworthy for a product that is over 30k. And again, unit started to malfunction not over a month after it was first used. I would say we pretty much took care of the unit, we only use it twice a week. Placed it where it was perfect to put. Followed every advice given to us by the technician who installed it but still, it malfunctioned a few weeks after we started to use it. I am ashamed of the brand itself, we should have chosen Panasonic or Samsung instead not a dumb brand like Whirlpool. I certainly do not recommend the brand for a washing machine unit. Frontloader is a crap.

I purchased a new water heater in August 2013. The pilot light started going out in October/November of 2013. After calling the Tech Support phone number, (877) 817-6750, I was advised to clean the burner screen. First this is very difficult to do because the burner screen is underneath the water heater and almost impossible to access. Second the closet the water heater is in did not show any signs of debris that could clog the burner screen. I did as they recommended. Several calls, and several weeks later, they finally authorized a technician to come and service water heater. He performed a cleaning even though he couldnt find anything to clean; and he replaced the control module. The new control module worked through the spring and summer seasons and then I started having issues again in the fall, late October. Started calling the same phone number and was told again to clean the burner screen. I convinced them to send out the technician again. The A and E Factory technician came out and only cleaned the burner screen and left before I had a chance to get home. This happened several times and I called Whirlpool every time. The next A and E technician told me to try changing out the draft vent chimney to a different size, which I did. Problem happened Again! I finally asked for another plumber and they sent me 3 names of their authorized plumbers. I called Phil, Philco Plumbing. He told me that I needed to have more ventilation, so I added more ventilation, even though I later found documentation stating I already had more than what was required by the manufacturer. Again, a week later, started having problems. Call back and asked to have my personal plumber come out. This time the rep told me that I have always been free to choose any plumber I wish (why wasnt I given that option the first 10 times I called?). My plumber came out and replaced the control module and the thermocouple, but wasnt convinced that these were faulty parts, he honestly couldnt figure out why I am having this problem, but it was worth a try. That lasted about 1 week and now I am having the problem again!!Whirlpool will FINALLY authorize a new water heater, but they will not authorize installation for the new water heater. I have already spent money on recommended repairs that have not worked. I have taken 15+ hours off of work to watch plumbers do nothing that has rectified my problems. And now Whirlpool wants me to deal with installing the unit myself, OR pay to have it installed! They say they wont cover installation because I purchased it more than 1 year ago. They seem to be missing the fact that I have had trouble with it the ENTIRE time I have owned it!This Flame lock system is garbage. I found on Consumer Affairs that a few years ago a class-action lawsuit settled, dealing with the same issues. I think it is time for another round! I KNOW that I am not the only one dealing with this problem because the plumbers I had out all had similar complaints from many of their clients. Whirlpool wont fess up to the problem, but the problem is real.

I bought a brand new KitchenAid stainless steel refrigerator for close to $3,000.00. It has a big crack in the back casing which Im sure is affecting the seal. It is still under manufacturers warranty. Whirlpool sent out a technician to put a yellowish plastic epoxy to seal the crack. When I told him that this was unacceptable as it dries yellowish and has a dull finish he explained that that was all Whirlpool was willing to do.I have been dealing with Whirlpool for 4 weeks now and they refuse to repair the crack and they deny any manufacturing defect. I have sent them pictures of the crack and they still refuse to resolve this issue. Very bad, horrible experience with customer service, long waits on the phone, rude and ineffective employees. This CLEARLY is a company that will not stand by their product and I recommend everyone to CLEARLY stay away from purchasing any Whirlpool products. They will be paying a lot of money for very poorly manufactured products.Please, please, do not purchase Whirlpool products! You will be happier spending money on a company that values you as a customer before and after the sale. Obviously Whirlpool would rather forget you after they have sold you their product and have their money. Thank you for reading this. I hope I have saved potential appliance customers from making the same mistake I made. DO NOT BUY WHIRLPOOL!

We purchased a Whirlpool Duet machine in September 2010. About a year ago, I started noticing tears and stains on clothing. Luckily, it was always on a washcloth or blanket, nothing special. Last week, it tore a 3-inch hole in my good jacket. I was not happy! My husband and I checked inside the drum and all around the seal. Neither of us found any rough edges. I thought if I called Whirlpool, they might have had a recall. They assured they had never heard of this problem. REALLY!!! Just look at all these e-mail complaints. Back to the old top loading - basic wash machine. Definitely not a Whirlpool!!!

I purchased a Whirlpool oven/range from Lowes in September 2016. It was working ok until the convection fan stopped working. I purchased the extended warranty for 3 years but the oven stopped working in December (3 months past the extended warranty). When I contacted Whirlpool to complain about the horrible product they have been selling to people, all they could do was suggest a repair company that charges $99 to come out and diagnose the problem. DO NOT BUY any whirlpool appliances. The name brand used to signify quality but the appliances they sell now will not last. BTW I may have used the convection function maybe once per month over the past 3 years ... So its not like I over used the oven.

My comments are similar to all the other comments on here regarding the Whirlpool Cabrio washer: I bought a Whirlpool Cabrio 5 years ago and have been sorry every wash day since. I have to wash my clothes twice because the machine doesnt fill the tub with enough water to get the clothes clean. I have tried using the bulky setting for all loads to try to get the water level high enough to at least cover the clothes. This is a terrible design and the worst piece of junk. I will never buy a Whirlpool product again...

Bought a Whirlpool refrigerator and now it is dead after only 3 years - the gas is gone. The Dealer at Budget Appliance Surrey told us it was not a good fridge to begin with (but sold it to us for $900.00) and that Whirlpool had made a lot of fridges cheaply to begin with... So it was not their (Budgets) fault. When I contacted Whirlpool they were really too big to listen to my complaint and even though I had the receipt, they did not care to hear my complaint either. Never buy a Whirlpool fridge.

Got the dreaded 4 flashes LED status - High Temperature Shutdown. Online and vendor documentation says that this condition requires gas valve unit replacement, a $115 option. If your Pilot remains burning, but main burner does not kick in, then a good guess is the circuit board requires a reset. Prior to any further work, test the Thermopile, that is the round item with two blades located below and to the right of the gas valve unit. Move knob on control panel to OFF1) Pull out plug with red and white wires located on front of gas control. 2) Have someone Hold in the control knob on the unit at Pilot, and make sure Pilot flame is burning. 3) Using a multi-meter, set it to millivolt reading, and test voltage across the two wires. Voltage should be greater than 350mV, preferably >500mV. 4) If you get a reading in that range, your Thermopile is good. Turn knob to off position. Do NOT uncouple gas lines. 5) Piezo Igniter wire comes apart, disconnect it. 6) Remove screw that holds front cover. (screw located bottom left as you look at the unit) 7)Cover simply pulls off directly towards you. 8)Remove the screw holding the circuit board to the cover, and remove circuit board by unclipping it - 3 clips, one either side and one at bottom. 9) Unplug the 3 strand thermostat cable, you should now have the circuit board clear. 10) Take a piece of aluminum foil, fold it twice, then lay circuit board on it facing up, do it on top of tank, want it grounded. 11)Using one of the multimeter probes, wrap a piece of foil around it, keeping point free, and ground it too. Then slowly work around the board, touching all the solder connections you see, as well as the chip legs. Pay particular attention to the round objects on the board (capacitors), make sure to ground out each of the solder points, visible either side. (takes about 5- 8 minutes, take your time) 12) Once done, reconnect thermostat cable to board, then reinstall board into cover (dont forget the screw)13) Place cover back into place, screw in cover screw, reattach Piezo wire and black electrical plug with thermopile wires. 14) set Knob to Pilot, get pilot lit (may take a few hits on the Piezo button) and while still holding the knob in, watch to see what LED flashes you get (there will be a 10 second time lapse before it will start to flash) 15) You should either get 1 flash or 7 flashes, that means the board is reset, now turn knob to warm, and see if main burner kicks in. Good luck, and for a half hours work you have saved yourself $$$. PS: If it occurs again, you have sediment build up, need to drain the tank.

Bought this washer 3 months ago. Absolutely hate it! Leaves white film on my clothes. Have to run all washes through a quick wash to get the film off. Hammers the water through the pipes, causing the fittings to come lose and leak! The spin cycle practically dries the clothes leaving them so wrinkled that I have to dry them longer to get the wrinkles out. Waste of my time and MONEY!

My house was built 20 years ago, with all Whirlpool appliances; built-in microwave over the electric oven, gas cooktop, and under counter dishwasher. The oven just gave out. Everything else works fine! Let me repeat that. I have a 20 yr old Whirlpool microwave that works just fine! Well, since the oven broke, we thought, maybe its time to update all the appliances. We went to the large appliance store from which our original ones came, and were told that all microwaves are now made in China by Sharp, and are crap!! Wed be lucky to get 3 years out of one. My jaw hit the ground. I couldnt believe the appliance salesman was telling us this! In fact, the appliance repairman that diagnosed my oven to be unrepairable ($100 trip charge, thank you very much) didnt have much good to say about the newer refrigerators... They contain much less Freon and dont seem to hold up as well... So, I guess Ill just keep my old appliances going as long as possible! How can appliance manufacturers stay in business!

We purchase a washer and dryer from Lowes in 2012 and a couple months ago I begin to notice that the Clorox and the softener draining spout is not working. The Clorox side is full of water, and the softener half of the time dont even drain all the way and not happy with that. The washer is beginning to rust on the inside by the dispensers, the lid area and the outside panels. I should have purchase GE. I would not recommend this brand to anyone.

Worst refrigerator Ive ever bought. Previous one still perfect shape. 22 years old. Freezes everything on top shelf. Motor making grrrr noises. Had repaired. Now bottom crisper drawers so cheap the plastic is breaking. Drawers wont slide. Now Deli tray lid snapped in half! STAY AWAY from this USA made product.

Our 4 year old Cabrio top loading washer failed. Apparently there is an engineering design issue with the pump and tub assembly causing the machine to not complete its spin cycle. These items will typically fail between two to four years of operation. We paid $1,000 for what we thought was a high end machine from Whirlpool. After having a local repair company diagnose the issue, we were told by Whirlpool we must use their authorized service companies. After 6 weeks of waiting for service, parts and several trips to the laundromat, we had the repairs completed by Whirlpools authorized service provider. Within one week, our machine failed again, called Whirlpool and they said will not help us. DO NOT BUY WHIRLPOOL PRODUCTS!!!

I got a Whirpool Cabrio Washer that I purchased in 2008. I am constantly getting ul code. If washer is leveled, it leaks water out the bottom rear of the washer. Its a piece of junk. I called Whirpool to no avail. Whirpool will not stand behind their product. They know they have a problem but wont do anything about it.

The washer worked well the first year and has gone downhill since. There is mold on the rubber seal where the door closes. This was supposed to be a recall and was never sent the replacement part. We have to constantly use bleach to clean the rubber.

Very unhappy all the way around with Whirlpool. The first refrigerator shipped had to be replaced, I do not remember the original problem, just the ordeal involved. The replacement had to have the computer board replaced twice, the icemaker stopped working after a few months, the freezer door does not seal properly. And now, after less than 3 years, the drain is clogged. After researching, come to find out this is a common problem and has resulted in many water damaged wood floors, including my own. Never Whirlpool again. There are much better brands on the market today with better price points. I highly recommend staying away from Whirlpool.

Whirlpool Cabrio Washer WTW6200VWO & Cabrio Dryer WED6200SW1 - My Cabrio washer ties clothes in knots but the big issue is that if it goes to UL (uneven load). There is no alarm. Washer stops all operations except one. It fills up over the top, all over the rec room, out the door and down the street until someone alerts me! I run down, hit cancel and it drains. I unknot the clothes and start over. Then I mop up! Help! My Cabrio dryer has been through four door latches and I finally realize that the issue is that the latch and the protruding part do not line up evenly. This breaks the latches. Help!

Purchased a Whirlpool Cabrio Washer a few years back... Started getting F1 error message and just proceeded thru it like most did initially, but now has become pain in the rear just to do one load of laundry as we get the error 2-3 times when we start each load - then on every load w/ 21 minutes left on the cycle. From the looks of things online this is a chronic problem and should be fixed by manufacturer. I called Whirlpool customer service and first person I talked with said they understand it is an issue but no longer are any recalls or reworks on that machine. I asked to speak w/ supervisor and sat on hold until I got one. Was then informed they do know it was a problem but was not something they could do anything about other than schedule a service company to come take a look. I specifically asked if there was at one time a recall or if they were fixing this issue for a while. She said Yes, they took care of some of their customers but are no longer doing that for this model. So basically because I didnt call in at the right time I need to fix my machine myself. I said it will be the last Whirlpool or Whirlpool associated appliance I ever purchase if this is the kind of customer service I can expect... The supervisor just said she was sorry to hear that and to have a nice day. Hopefully enough people read these reviews as I wish I would have before purchasing my Cabrio and dont buy Whirlpool.

I bought my Cabrio Platinum Washer and Dryer in 2013 (4 years old). About a month ago, it started sounding like an airplane was landing in the house while on spin cycle. I called a repairman and he said the bearings were going bad and it would be better to buy a new machine. When we pulled out the washer, there was grease all over the floor - apparently a seal started leaking and the bearings had no grease so they started burning up. I talked with Whirlpool, after all it was only 4 years old and a seal leaking and burning the bearings up wouldnt be from normal wear. They were not convinced and offered to give me a discount on a new one -- No Way! I went with another brand recommended by the repairman. The screws on the dryer door also came out and we had to replace them. So much for the Whirlpool brand and especially their top of the line machines. I will not buy another Whirlpool washer or dryer.

Updated on 02/13/2021: Company fails on customer service. My stove’s trim is rubbing off on my Whirlpool stove only 6 months old. No chemicals were ever used to clean the surface. This trim piece surrounds the controls and is not covered under warranty. An expensive cheaply made stove. Multiple attempts to have the piece replaced got nowhere. A letter sent to the head office was deferred back to customer service. Whirlpool has lost credibility and I will no longer buy their products.Original Review: So disappointed to find the paint finish coming off the trim on my 8 month old Whirlpool range. No harsh cleaning chemicals were used. Only mild dish soap and a microfiber towel. The trim, attached to the control panel on the front of the stove, is not actually stainless steel, but painted to look like stainless steel. Whirlpool warranty doesnt cover esthetics and refused to replace the trim, stating replacement would include the entire control panel and it is not covered under warranty. So be prepared to have your new expensive stove look old in a matter of months.

I have had my refrigerator for eight years. Only had one prior repair which cost me $85. I have had a wonderful experience with this particular product. I am pleased with the liability and hope to replace with an equal or better appliance.

Retail price, $3100. Purchased from Sears Outlet for 2/3 of that amount due to dings on a side panel, back and some blemishes on the front. Still sold as new with a new warranty (Good thing!). Ive had full use of the unit for 1 month out of 3 that Ive had it. Freezer stays at a temperature in the mid-20s and, after 4 repair visits, it turns out the compressor is faulty and now Im waiting for the 2nd part to arrive and be installed to see if that corrects the problem. Sears stepped away from the problem saying it will be repaired. Whirlpool has wonderful telephone support that is totally committed to me staying with a faulty appliance until its fixed. My view is that a unit that expensive, should be no problem to replace allowing Whirlpool to take as long as they want to make repairs and re-sell it. But no; their commitment is to keeping the refrigerator in my house and running a service tech back and forth while I continue tossing food that cannot be used.

Purchased a Whirlpool top loading washer. The agitation cycle is unreasonably loud. So loud you can hear it everywhere in my home and cannot have a conversation within about 30 feet of it. When I ran it for the first time I thought it was malfunctioning and when I called Whirlpool I thought they would send a technician to fix the problem but they told me that the sound was perfectly normal for high efficiency washers! My other high efficiency washers were very quiet. The fact that they think this type of noise is not only normal but quite acceptable makes me quite certain to never buy any of their products again. Very disappointed to see what once was a quality company to be so lame.

Bought a Duet Whirlpool washer a couple of years ago. After about 6 months, it started to make a lot of noise like a jet taking off. Where we live there isnt a repairman thats able to come and fix it. So we would be required to have it shipped away to have this done. The washer was purchased at The Brick when we bought our new home. When we told The Brick of our problem we were directed to call Whirlpool directly - this we did and like everyone else we were given the runaround with no compensation to come. I will never buy another Whirlpool product again.

I bought this to provide A/C to our bedroom during a power outage by use of our Gasoline generator. It is very quiet and provide a very cool air flow. The double vent pipes make it efficient and more than capable of cooling out 15 X 25 foor bedroom. Whirlpool has 28,000 employees in the USA.

We purchased a Whirlpool Cabrio about 3 years ago. Have never really like it. It doesnt add enough water to the wash cycle unless you use the bulky setting, which fills the tub up the entire way, so wastes water. It would have been nice to choose your water level like you could on the old machines. Now it wont drain completely and wont spin totally. Ive tried using the drain/spin cycle 2-3 times extra and it still wont spin all the water out. Ive noticed that there is still water in the drum, you can hear it slosh when you move the drum, so I wonder - has anyone ever been told there is a filter in there somewhere that might be clogged keeping it from draining completely? My husband thinks that maybe all the water in the bottom of the drum is not letting it spin because its throwing it off balance. And yes, it stops before the cycle is complete and just sits there and blinks and you have to unplug it to clear the cycle. What a pain. We will never again buy a Whirlpool and I absolutely do not recommend Whirlpool washers. I have a Maytag as well and have not yet had problems with it. Bought it at the same time we bought the Cabrio (2 households). At least the water levels in the Maytag are a little more normal. You can wash more than 1 pair of jeans and get them clean in the Maytag. For those of you with the problem of the clothes not smelling clean - try running the clean cycle with a cup of bleach about once a week. No clothes in it - just a cup of bleach in the bleach dispenser and nothing else. Works for us.

I bought the WP Cabrio washer on 10-18-16 from Lowes. It does not wash well, my dark clothing came out with white spots all over them even after I rewashed them x 3 and the lighter clothing you dont see the spots so you are wearing dirty clothes. Also, it is making a lot of noises while running. WP should pull this model off the market.

Cabrio washer - This was a huge disappointment, clothes not clean, sometimes still dry in middle even with small loads! Have had washer just over a year, second time it has quit working! This time it wont even give a code to why it wont spin out! Living on a budget, I cant afford such a shoddy product! Never again will I buy any product associated with whirlpool!

Whirlpool Duet pair. Like Whirlpool products and have had good experience with them. Have had the pair for 3 years. Like the way they wash and dry. Clothes do not take a beating. Only dislike is the vibration on the washer. I look for capacity and extra features such as: steam option and extra cycles. Now I also look for noise and vibration. Would definitely like to stay with Whirlpool. Definately cost is important, but for the sake of a few dollars more the options and the brand are something to be considered. Having a steam cycle and wrinkle cycle are important in any dryer.

My NEW Whirlpool top loader just stopped working. I bought it in June 2015. The extended warranty I purchased ended at the end of June of this year. Guess what happened a few weeks later? The thing died. Seems totally fishy! My parents washing machine lasted 20 years. Why does this one die weeks after the warranty expired?

I was very excited when Melanie from Whirlpool customer service called me back about my complaint. WHAT A JOKE! I thought she was going to offer at least a repair considering by her own admission this same problem with my control panel of my double oven happened just last May (dead for the third time). Instead she offered me 15 to 30% off a new product if I bought it in the next 30 days! ARE YOU KIDDING ME?The first time the control panel died was when I used the self-cleaning feature. The oven never turned on again. Cost me hundreds. I have been afraid to use the self-clean feature ever since. The second time was in May and is no longer under warranty? Again it cost me hundreds!! Now I am supposed to be happy with 15% off another one of your products? Why would I have any faith in any of your products? I have since found out that Whirlpool has had so many problems with this model - they have quit making it. The repair man says Whirlpool cant make the control panels fast enough to keep up with all the repairs but this is still not under warranty - how about a recall? Do you guys stand by your products at all?

I bought the stackable Whirlpool Duet. Piece of garbage (model # WFW9150WW). From day one the washer never worked. Error lights/bells kept going on before the second spin cycle. First repair guy couldnt figure it out. And the manual says just unplug and plug the power cable back in. Sure--every time I use it? I called Whirlpool service and they said a new control board was needed without even seeing the machine, which tells me this is a manufacturing flaw. I waited 2 months for the board. When it came, the repair guy put it in and then the machine would not stop filling. So another switch and hose are being ordered. Whirlpool customer service is completely useless. And no one will even discuss replacement. Now Im stuck. $700 out on the first machine and $200 on the extended warranty, which will be useless because Im going to dump the machine. And additional $800 on another new machine which probably wont work either. Oh, yeah, and you have to use special soap, which Ive tried, and got down to using only 1/2 a teaspoon because the suds never cleared. Please tell all your customers never to buy Whirlpool!

My mom got me and my children a new fridge side-by-side ice maker. We were hoping that since it was new, we would have it for a while, but 1 year and 1 month later, it is not making ice and changes temp for no reason. My fridge will, most of the time, keep cold; but then, there are those days that it doesnt. No one touched the temp, and since its been more than a year, Im stuck. How wonderful to spend all that money for a year and one month! We dont have a working ice maker, and also, I cant keep food good. I cant afford to throw food away. And my mom and I cant afford to get another one.

In the last 6 years I have had two refrigerators each lasting three years with major repairs from day 1. I am on my 6th repair for my Whirlpool Model WRF89SDAM02 purchased in October of 2013. WHAT A PIECE OF JUNK.

My father and I both got the Whirlpool Gold gas furnace 3 seasons ago. I can't tell you how happy we both are! Our heating bills plummeted; the unit is quiet and does a fantastic job. I am 50 and I have to admit this is in the top 5 of the best purchases I ever made. For me to take the time to find a place to write a review 3 years later should be testament to how happy I am. Make sure you have it professionally installed! Don't skimp here…this is the key!

I purchased a Whirlpool washer and dryer from Sears in April of this year. Here, to date, I had to call four Toms to have this unit repaired. I contacted Sears to have the unit replaced. I believe this particular unit needs to be recalled. Sears informed me that the unit must be assessed by one of their qualified/certified technicians before a request to be valid. I have concerns about this statement. Employees will not go against their company in fear of retaliation. In addition, I paid cash for the unit and now cannot get my money back. I’m dissatisfied with Sears and their values.

I purchased the original Whirlpool refrigerator in August of 2013. That was replaced in October of 2013 due to a factory defect that left the ice maker unusable. In April of 2014, we now have a factory defect that has resulted in the entire unit unable to keep the fridge below 70 degrees F. It has been 2 weeks since the fridge died and Whirlpool has informed me it will be another 2 weeks until a replacement fridge will be delivered. I have spoken with countless customer service reps and 2 customer service managers, as well as 1 executive from the executive office in Michigan. Several times Whirlpool has dropped the ball in this process. The original repair appointments were booked and had to be rebooked because the repair company could not accommodate the appointment times Whirlpool booked. It took over a week to get the fridge declared dead. Then another week just to process the request through tech support... After speaking with 2 customer service managers and being told it was being rushed, I spoke with an executive who said the claim had never been submitted and it would take another 24 to 48 hours to process. I spoke with the executive after the 48 hours and he said the fridge will be delivered in 2 weeks! 4 weeks without refrigeration for a second factory defect. I have explained that I have a newborn (6 weeks old when this started) and a 2 year old, and we have had up to 9 people staying in the house (to visit with the baby) over this period and that I need a fridge to keep my breast milk cold. I was told I would receive a $75 gift card and a $125 check to help with food and costs associated with the loss of our fridge... Neither have arrived. We are spending quite a bit on ice just to be able to keep food and milk cold to temp. so we dont have to spend money on eating out (too expensive for us). I am shocked by Whirlpool’s poor customer service. The first time the fridge was replaced I dealt with one person and didnt have to call the customer service line every day. I wish I had her number still.

Bought this 18 cu ft refrigerator this year. Only 3 choices for temp. Everything freezes, milk has crystals, ice cream is soft. Buyers remorse! Old ref was a Whirlpool. Wished I would have given others a chance.

My landlord purchased a new Amana washer (NTW4605EW0) Labor Day weekend 2015. It started having issues in the spring, so we went through the process of utilizing the manufacturers warranty. Apparently, Amana, part of Whirlpool, requires 5 attempts at repairing the machines before replacing. Okay, so starting in June 2016, we arranged service appointments 5 times and replaced 1 part, then another, 4 times. Clearly, that part is defunct. Right? Fast forward to September and then into October. Get a new washer, and not the one I preferred. We got the Whirlpool WTW4816FW1. Before the installers leave, we are having the SAME issue. Stops midcycle, doesnt finish cycle, sometimes stops while filling, or while full, or kid wash, or mid drain... But now with the new washer, the drain and spin cycle thinks it should FILL instead of drain... and Whirlpool said they would get someone out the next day, a promise they cannot keep because they dont supply the repair guy, they source with local companies. So, the company ordered 3 parts... That could be the problem. And 4 days later, 2 parts are on freaking BACK ORDER. Parts arrive. All new parts replaced. Machine still doesnt work. Outlet tested by us and them and it is fine. The techs think there is some kind of RF interference. Turn off sensor light, which is on the same wall, unplug power to wifi router (which outdates the washer). Still, doesnt work.I have spent half my week, every week, since June, restarting my washer, unplugging the damn thing, waiting, and waiting, trying again and again and again to wash 2 loads of laundry a week... Literally takes a week until the damn thing does its job. Whirlpool is sent us a replacement washer. Can you guess what happened the first time we started it? SAME ISSUE. Cycle will not complete. Sometimes it dies before it even fills. Sometimes it dies while filling. Sometimes, it will fill and fill and drain and fill and fill and drain and... never stop filling. Or, the fun one, the drain and spin cycle thinks it is suppose to fill. Continuously. And then, suddenly, after unplugging it for 1 hr, or 24, or 72 hrs, it will work fine for 1-7 cycles. Nothing is consistent except that it doesnt work consistently. HAS ANYONE HAD THIS MUCH TROUBLE???

Thank you EPA for requiring water limits on manufactures of washing machines. As a result, I am forced to use the deep water and extra rinse functions to get clothes half way clean. So much for saving water! This Whirlpool Cabrio machine cost way too much for such lousy results. Additionally, I have to purchase a special product and clean my machine every month or two. Ridiculous!! I yearn for the old days when I could wash my clothes and they would actually come out clean.

I bought a Whirlpool CABRIO washing machine. I was assured it would do large & bulky. I didnt realize that being so called energy efficient meant that it didnt put enough water in to get my clothes saturated! On large loads or bulky items when I put in my laundry detergent only to find out I had to try to wash them again. Parts of the clothes would still be unwashed & dry after going through a whole cycle! After washing the clothes that did get clean comes out looking like I took them to a stream and washed them on rocks. After taking care of my clothes so they didnt look as old as they were, they are now faded & old looking. I hate this washing machine!

The electronic panel on my 4 year old barely used wall oven went out when I used the self cleaning function for the first time. It is going to cost $400 to fix it and another $100 to replace the stainless steel sides. They will have to remove to get the oven out of the wall. The oven door is locked and cant be opened so of the wall will have to torn out as well. I called Whirlpool 3 times and have offered no assistance.

I purchased Whirlpool refrigerator WRF992FIFM00. On December 2016. It was cost $3400 but it stopped working after 6 months. I called Whirlpool for service. Technician came. Diagnosed it and he said he needs two parts but parts are not available. So he asked me call Whirlpool for help. I did call Whirlpool three times and the problem cant be solve. Whirlpool told me have to wait at least 10 days so they locate the parts so they can send out to Whirlpool contractor for repair. They dont have another solution rather than I have to wait until parts have available. I have to thrown all my food and I live without refrigerator. So what the point I need purchase extension warranty if they dont have parts to repair. I would not recommend anyone to purchase appliance from Whirlpool.

I have made a conscious choice to remove baked food from my diet back in early 2013. That has not stopped my wife from pursuing her passion for baking from time to time. It goes without saying that baking requires a well functioning baking oven. The one that came with our home was a Whirlpool Wall Oven/Microwave combination. Sometime in early 2014 the Oven broke down. I had no choice but to replace the combination. After doing some online research and a couple of trips to stores like Sears, Home Depot and Lowes, we decided to drop $2700 of our hard earned dollars on a brand new Whirlpool WOC95EC0AS wall oven microwave combo to replace the old one. Lowes sent someone home to take measurement to make sure that we ordered the right size for the slot in our kitchen. 2 weeks after the purchase, around March 27th or 28th, we had the Microwave/oven combo installed in our kitchen by some Lowes provided installation contractor. After installing the appliance, the technician demoed both the microwave and the oven part of the combo. Everything looked good and we were happy to see the shiny new appliance adorning our kitchen. Little did we know then that this would start a seemingly unending horror story. For the first 3-4 weeks we used only the microwave and it worked as expected. Then one weekend, my wife decided to do some baking. The dough was prepared meticulously and then came the first surprise, the oven refused to turn on. Feature not available - the message scrolled across the LED display. And horror of horrors, the microwave started giving the same message immediately after. We looked online for solutions, and we found one that suggested that we try breaking the circuit for 1 minute and turn on again we tried it to no avail. And now we went from having a working microwave/broken oven to no microwave/no oven.We waited till the next day or so before placing a call to the customer service number provided in our warranty receipt. By now the 30 day return guarantee had expired and it was the end of April, 2014. Product was now under manufacturers warranty. Whirlpool/Lowes customer service scheduled a technician to come take a look at the oven.My wife took a day off from work and waited for the technician. The technician from J&H appliance repair of SJ came home, took a look and then tried breaking the circuit and turning it on again after a minute; of course, it did not work. After consulting with someone on the phone, he decided to order some parts the main circuit board. He promised to come back after the part arrived. We did receive a call from J&H to schedule an appointment to install the part and schedule a time we did. J&H decided to no-show us on the appointment and my wife wasted another day of her time-off from work.We called customer-service again and this time they decided to send in a technician from a Sears owned company called A&E Factory Service. A technician came home and he went through the same steps as the earlier technician from J&H. This time, it was my turn to stay home and welcome the visitor. Finally when there was no trick up his sleeves to left to try, he decided he is going to order the main board. A&E technician did something different, he ordered the part to my home. I called him as soon as it arrived. We scheduled a time and he arrived to install the part. I stayed home again. Well, result was no different and the appliance was in no mood to oblige to our coaxing and cajoling. Feature not available, it continued to bleep out. He ordered 2 more boards to my home. I stayed home again to welcome the technician and he arrived again to install the 2 new boards but the result was no different than the last time. Feature not available - the zombie appliance screamed. He told me that there is only one that remains to be done which is to replace the front panel circuitry so he ordered it. By now it was end of June. We hadnt used the oven for 3 full months and the microwave for 2 months.First week of July, a new technician from A&E showed up early in the morning to install the newly ordered front panel. Surprise, Surprise - Feature not available screamed the shiny lemon sitting in my kitchen wall. The technician asked me if I will be home the whole day and I said yes. Another technician, a supposedly senior expert came by that afternoon. He tinkered with it for a couple of hours and like all who came before him, he surrendered. He said there is nothing left to do with the oven and that he is going to recommend that the oven be replaced.He left me a voice mail next morning saying that I need to call Whirlpool myself and apprise them of my experience and ask for a replacement. So I called the customer service after a long 1 hour talk with customer service rep, followed by a conversation with his rude supervisor. I was told that Whirlpool no longer deals with A&E that they broke their relationship with them as of June 31st, 2014. I failed to understand why that was my fault. I was told they need to send technician from another company, can you guess the company whirlpool recommended? It would be funny, if it wasnt incredibly painful to deal with horrible customer support representatives yes, it was the the no-show company J&H. I told him Id have nothing to do with J&H. So they recommended their only other option, a company called AGO.AGO technicians started showing up at my house since early July and I waited with baited breath for them to suggest a way forward to a resolution. Well good thing that I didnt hold my breath for that to happen. AGO technicians have made 8-9 visits to my home during July and August with the last visit being on Aug 20th. They replaced all the boards that A&E guys had already replaced the previous month. On August 21st, I received a call from AGO rep saying that they have given up that the product is irreparable. They gave me a reference number and asked me to call Whirlpool for a final resolution.I called Whirlpool customer service on August 22, 2014 and Spoke to Jennifer and her supervisor for 32 minutes. They wanted to restart the whole process of sending technicians to my home. It would be funny if they hadnt stolen $2700 of my hard earned money + all the lost hours and productivity + vacation time lost + headache they caused + the pain of not having a working Oven/Microwave in our kitchen + dealing with rude customer service reps, I lost it. I threatened to put the whole recorded conversation on YouTube. The rude inconsiderate supervisor hung up on me.I called back after a few minutes and spoke with a tad bit more reasonable rep named Ashley. At least, she had the patience to hear me out without barking at me about what my rights are as a customer. Well she had no better solution than to suggest another technician appointment what was the excuse this time? That the last technician from AGO didnt call Whirlpools tech support line while he was at my house. As if that is my fault. I agreed and we setup an appointment for Wednesday, August 27, 2014 between 8AM and 12PM with the same old company J&H who no showed me once. Goes to show you who Whirlpools associates in business are. They had only two companies providing repair services in San Jose AGO and J&H.I took the morning off from work on Aug 27, 2014 and waited till 12 noon and there was no sign of technician. So I called Whirlpool customer service number one more time. As you would expect by now, a rude customer service person named Eva from Michigan picked up my call. It was reasonably clear to me during that conversation that the J&H technician no-showed because appointment was not communicated to them. She emphatically claimed that my warranty is not a product replacement warranty but a repair warranty and that she needs to send me a technician to take a look at the product. Can anyone believe it? She told me I have only one option either to accept the perpetual technician visits or she will note that I have rejected their offer to service the product. I told her I am not rejecting anything, just exploring all my options. She assured me I had no other options. The arrogance of these people! So here I am, several thousand of my hard earned money stolen by Whirlpool and I still have no working product. Adding insult to injury, 2 weeks ago I received a letter from Whirlpool pitching me to extend my 3 year extended warranty to 5 years. They want to inflict more pain and charge you for the privilege.I have more options than Eva would want me to know. Luckily I have legal coverage under my benefit plans at work. Even more importantly there is social media and internet. I am pursuing those options at the moment. Heres the summary: Lowes takes my $2700 on March 13th. I get the Wall Oven delivered and installed on March 27th. A total of at least 15 repair visits are made to my home between first week of March May and August 21 (I have started losing count). Time since product purchase: > 5 months. # of times the oven has worked : 0. Hours spent talking to rude customer service reps: 4-6 hours. Time spent at home baby sitting repair technicians : > 100 hours. Lowes, Inc washed their hand stating 30 day money back guarantee is over. Its customer service people were not of any help either. UPDATE 9/15/14:Within a few hours of publishing this post (on 9/2/14), I was contacted by both Lowes and Whirlpool via Twitter. Both the companies seemed genuinely interested in resolving this issue. After I DMed my appliance and contact information via twitter, Melissa from Whirlpool called me and left me a voice mail on Wednesday, Sept 3rd, 2014 informing that they have decided to replace the oven. I was told in that voice mail that I should expect a call from Whirlpool on the details of the exchange before end of day on Friday (Sept 5th). I was contacted by Lowes and I informed the Lowes rep that Whirlpool has agreed to replace my oven.I thought I would really be able to make a single update to the post informing the world that Whirlpool really made amends and tried to hard to correct the failures of the past. It is 9/15/14 today and I havent received any updates from Whirlpool about the how/when of the exchange. I made 2 customer service calls to Whirlpool last week. I was unable to speak to Melissa the first time, but did speak with another rep. She told me she will pass the information on to Melissa and ask her to contact me. She connected me to Melissas voice mail and I left her a voice mail. Melissas voice mail greetings suggested that I also contact her via Whirlpools customer service email for faster response. So I did that too.On Thursday 12:37PM pacific, I received a call from Melissa. She had no useful information to share with me. She is waiting for some paper pusher to do his/her job and could not make any promises as to when it will be resolved. My file is stuck in one of Whirlpools many bureaucratic bottlenecks. This is no personal indictment of Melissa it is just evidence that Whirlpools is not serious about customer satisfaction. My experience is not isolated as evidenced not just by this event but also by the number of people ranting on their social media handles. Here was an opportunity to rectify its mistake and win the confidence of a customer back and so far Whirlpool seems to be uninterested in any such thing.IMPORTANT UPDATE (9/16/14): Please share this story via your social media handles. It is important to hold these people accountable for their actions. It is also important that we inform consumer about the perils of doing business with these organizations. Thank you very much. UPDATE (9/17/14): Whirlpools customer supports twitter moniker is @WhirlpoolCare. LOL. They could have demonstrated care by resolving customer issues, instead they removed my permission to post to their Facebook Page. WhirlpoolCare indeed.:) I will be handling this mostly through Twitter follow me at **. I will be using hashtag #whirlpoolsux going forward. I would request that you do the same. Thank you.https://www.facebook.com/WhirlpoolCare.

We bought this microwave/hood combo at Home Depot and installed it in our second home roughly 16 months ago. We used it very little over that period because the home is only for vacations. The plastic handle began to disintegrate where it connects to the door (top and bottom) to the point where there is very little plastic remaining. We called the service center and the woman attending to us told us she had never heard of that happening before. Either she had just started working there that day, or she was lying because there are dozens of similar complaints on this very website.I do not understand what is to gain by denying a manufacturing defect. It simply makes no sense to me that a company would allow their reputation be so tarnished. What an ignorant and short-sighted business practice. I will never, ever buy another product from this company. I will also be sure to tell anyone who will listen what I think of the shabby service they gave us.

Absolutely terrible product. Have had nothing but problems with it since I got it. After 4 months the pilot started going out every couple of days. Would have to vacuum the filter just to get it to light. They eventually sent me a screen to wrap around the bottom, that would only extend the interval to maybe a week instead of going out every few days. Now tonight it wont even relight! So tomorrow Im buying another heater and throwing this piece of junk out, a waste of $750.00 for two years of headaches. Dont, trust me. Dont buy this garbage of a water heater. And like others I bought it a Lowes, done with both of these stores!

We purchased our brand new home ten years ago and we were thrilled it had a double wall oven unit that I had always dreamed of owning. Well, the first time I used the self-cleaning mode that dream became a nightmare! The oven was in cleaning mode and I was so happy as I had never had a self-cleaner before! When the cleaning was done, the door remained locked and the control panel was not working. After making sure it was cooled the next day, I called for warranty repair. They came out and fixed it and apologized for the inconvenience. I was thinking it was just a glitch and went on with life. Due to my husband’s business, we only live in the house part time as we do extensive traveling. My children are grown, so my cooking is mainly holidays and birthdays when we all get together. Since it is used so seldom, the need to clean is not as often as others might be. The next two times I cleaned it the same thing happened. The third time they came out they informed me that it was getting too hot in the cleaning mode and the steam was going into the computer panel and melting the electrical wire. They also said I would no longer be under warranty and from now on it would be my issue. The next two times I cleaned the oven, I did so the old fashioned way and skipped the self-cleaning. This week my oven started beeping and giving me a code and will not work. I called my trusted repair man and this is what I learned. The computer board is probably toasted. They no longer make the board, so he will have to send it out to be rebuilt. This will take 10 to 14 days and the cost will be somewhere in the neighborhood of $650.00! Are you kidding me?! How is this my issue? I have checked faithfully every few months, assuming that others are having the same issues, and that Whirlpool would be doing the right thing and recalling these ovens. Stupid me! This last time I had not even used the oven in three days and it still went out? I am old enough to remember when the first place you went to look for appliances was Whirlpool because they were good, they lasted and the company stood behind them. Oh, how the mighty have fallen. From now on they will be the last place I look! I’m not sure what is going to happen, but I can assure you I am not spending $650 to repair this piece of crap!

I bought a new Whirlpool fridge that has been a piece of junk since the day I bought it. The minute the warranty expired. The thing broke down. The corporate service center was a joke. 15 min wait time just to get through. Then a runaround of misinformed referral numbers. Minimum charge $200/30 min just to have a service rep even look at it. And then $100/hour + parts after that. Highway robbery. My doctor doesn’t even charge me that much. I will never buy a piece of junk WP product ever again. Their customer service is rude and non-existent. The company does not stand behind its products. Don’t buy!

I bought at Lowes. The first one was sent back (doors stuck, suction cracked lining). Now the temps are not working in the fridge or freezer. All the food got dumped. Its sad. My old one lasted closer to 25 yrs. (and may I add up to ten children). This one has only been used by adults. I thought I could trust Whirlpool?! I sent info to local Lowes. We will see if theres any help.

I purchased 4 whirlpool appliances at Leons in Mississauga. The side by side refrigerator was replaced within a few weeks. Got a new one and have had that one fixed at least 3 times already. The stove was serviced 3 times now, the washer broke so many times. They gave me a refund. The microwave broke as well. They told me it was not fixable, then I called Leons and they said it was too old. It was only 18 months old. Did not get anywhere with the microwave. Had to buy a new one. The only appliance I had that didnt break was the dryer. So far. The fridge now has broken inside, the crisper wont slide in and out at all. Cant be used. I bought a warranty on all the appliances, and even though I had a warranty, when a coin got stuck in the washing machine because the drum inside kept banging because it was in need of new struts, they still charged me 135.00 to fix it. Two to three weeks later a repairman came and put new shocks on it. Finally after having it repaired about 5-6 times in a year and half they gave me a refund at Leons and I went to pick out a new washing machine. Overall I have spent about 6-8 hours on the phone complaining and making appointments with Whirlpool Canada.

We bought a new Whirlpool Dishwasher. Installed it, wife used it for two loads. The third time she tried using it the door sprung and it no longer latches. After two weeks of calling Whirlpool, we finally had someone come out to fix it. After the repairman took a hammer to the frame he stated that it had been dropped. He wobbled the dishwasher back and forth with his hand. He said the frame will never be correctable and we will always have problems. After another week we got a hold of Whirlpool and were told the repairman has ordered parts to repair the dishwasher. Whirlpool is hoping it will hang together until the warranty expires. If the dishwasher were fixable that would be fine. However, when the repairman who has years of experience in his job tells me it will never be right and will always be a problem, I believe him.

We purchased the extended warranty (service plan number **). The washing machine has been giving trouble. It locks out during every wash cycle and each time, we have to unplug the machine to reset it. Sometimes it makes it through the next cycle and sometimes, not. The first couple of calls we made, we were told to make sure it was cleaned, to make sure it was leveled. All this was done and we still have the same problem. Finally, a technician was sent out. He could not duplicate the problem and left. Thirty minutes after he left, the machine locked out again. We put in for another call, we were told it would be two more days. In the meantime, we actually video taped the next three times it locked up. This time, when the technician came out, he was able to see our video as well as saw the machine lock up. He stated, It did not give me a code so I do not know what else to do. He left and ten minutes after he left, it locked out again. We immediately called back and they informed us they could not get anyone out again until next week. This is very frustrating to have an obvious problem and have an extended warranty and the problem cannot be solved. We feel as if we are being blown off. Is there anything you can do to help us and/or give us advise of how to get this problem resolved?

I bought a Whirlpool Gold refrigerator in 2010 from Lowes. Within months it had a Freon leak and Lowes had to replace it. I had bought the extended warranty. In 2011 a part had to be replaced twice due to excessive noise. Then the freezer got frost buildup on a coil in 2012 and again in 2014. I called Whirlpool and asked if they would pay for my next 3 year warranty. They said no, it was my responsibility after the first year. I would never buy a Whirlpool product . Do research, Whirlpool makes several brands.

Cabrio Platinum Washing Machine - We received this washer and dryer set as a gift so I cant complain on the cost. However, it does NOT clean your clothes. Water smells at the start of each load, clothes are left with soap scum and several clothes have been ruined by oil stains!

Our microwave is less than 8 months old, hardly used and only for heating items. Besides the point, being under a year old. It began to make noise and pop, spark sounds with the smell of burning wires and promptly stopped working. We called the customer service line and began the long frustrating circle of completely bizarre conversation. Maintaining our belief this is a fire hazard and not wanting it in our home they insist on a repair person coming after trying to sell us Extended warranty, Why would we want Extended warranty when the warranty is NO warranty, it seems, whatsoever. After requesting to speak to a supervisor 3 times. A overly bubbly person comes on the repeat same spiel and to make an appointment for 1 week away from 8am to 4pm to be available for a phone call to make an appointment to see about repair on said fire hazard microwave that is less than a year old. This appointment is made with repair place and they too are confused and noted Whirlpool said this is not covered under warranty, and they too would contact them.Today Whirlpool Canada calls and gives number to repair place to book appointment, Hello we already have one and the frustrating verbal dance continues. 5 minutes after this call the repair place calls, as whirlpool contacted them as well to book appointment, which we both could agree this is the bizarrest situation since we already have an appointment, from their appointment. We keep saying we feel unsafe, this is a fire hazard. Which they completely ignore. This is unacceptable and extremely poor service.

I brought a whirlpool dishwasher in 2013. It never did clean dishes, had to wash them by hand before putting them in dishwasher. Had someone come out and check it. He told me I was using wrong type of soap, so I changed. That didn’t do a thing. Now I have mold growing in the dishwasher because the tub is cracked all around the inside. Called whirlpool, of course they couldn’t do anything about it. Have never heard of dishwasher cracking. So today, Lowes came out and took picture of crack that is where I brought it. So am waiting to find out what is going to happen. Will not ever buy whirlpool again and will tell all my friends.

I spent the extra money and bought a very nice looking Whirlpool range and oven. Within months, it started rusting. I keep a meticulously clean kitchen and Ive never had this problem with any other appliance. I sent letters to no avail. They said that their warranty on rust was 30 days! They refused to do anything about it and told me to go ahead and sue them. Terrible product. Defective from the factory. Do not ever buy a Whirlpool product as they do not stand behind it.

Whirlpool duet - I have had this machine for 4 years and have gone through as many door gaskets. They rip in no time causing damage to clothing and with the leaking damaging my wood floors. A definite do not buy!!!

My oven was 11 months old when I tried to use the self-clean cycle for the first time. 2 hours into the 4 hour cycle, the oven completely shut down, door locked shut and no lights on the control panel. The repair tech came out on a warranty repair call (no charge), explained that Whirlpool does not use a thermal protector rated for a self-cleaning oven and that it blows every time. He then proceeded to replace it with the same thing because he is only allowed to put in the recommended part, which is not rated for the high temp cleaning cycle. So the oven is usable, but not the self-clean. Since I am at the end of the 1 yr warranty period, even if I were able to get Whirlpool to replace the oven (ha!) there would be no warranty because I only get the original time limit. So if I had a new oven and it blew out, it would not be under warranty for fix/replace. The repair tech said this is a COMMON problem with Whirlpool self-clean.

Whirlpool g2 convect/micro over the stove oven - This top of the line oven is JUNK, KEEP YOUR MONEY-DO NOT BUY THIS JUNK! I have had problem after problem. Starting after only three months. Defected door switch, touch screen, flashing screen, error message. The service repairman and I are on first name bases. Thank goodness for the, out of my pocket warranty which I no longer plan to keep. I NEED A OVEN AND DEFINITELY NOT A WHIRLPOOL.

I purchased my new Whirlpool Cabrio Top Load washer to replace a Maytag that had finally given out in the summer of 2012. I wish I did more due diligence, but with a toddler and a newborn, I needed a washer asap. I severely regret my $800 purchase from Sears. It is now February 2013 and the machine basically only runs on two cycles - Casual and Normal. All the others stop in mid-cycle. Sometimes, the items are still dry or partially wet so I need to switch to another cycle to complete the wash. This is not good for Delicates or when I wash Whites, Heavy Duty or Bulky items which is one of the reasons I purchased the model. The cycle stops when the items are soaked with massive amounts of water. So I then have to turn it to the Drain cycle and start over. After a day of washing one load, I couldve done it the old-fashioned way in my utility basin sink and hung it out to dry ... I dont have the time for this. I am going to make a formal complaint to Whirlpool and to Sears. I cannot keep spending nearly $1,000 for items that break within a year. These companies should be ashamed of their lack of quality. I shouldve gone with the Electrolux and just dealt with the price tag - I wouldve been much happier.

I love my ceramic top. My only complaint is I wish my knobs were on the front of the stove because I am short. It would be nice to not have to reach over hot burners just to turn the temp up or down.

Ive had my Whirlpool water heater for almost 4 years now and for the last year and a half, I had to have the pilot light lit at least 5 times. I finally got so frustrated around the 3 times and called the company. They gave me instructions on how to light it and to ensure no draft was around the tank. A couple of weeks ago, it went out again and I called. This time I was told to replace the thermocouple. I did that and guess what? Still no hot water. Im a single parent with 2 kids and weve been boiling water just to bath.A service tech came out and told me I need to replace the tank altogether. I called Whirlpool service and they told me it was nothing they can do. Like many of you, I got this tank from Lowes and they will not do anything about it either. Its hurtful and stressful that doing a holiday season, I have to decide to either buy a hot water tank or give my kids a good Christmas. I know several friends and family who has had their tanks a lot longer with no problem. My problem is its a crappy Whirlpool brand with poor customer service.

My Whirlpool microwave has been great. Just the right size for my family, with enough settings that it wasnt complicated to use. I found it was very useful with different recipes that I liked to make. I always used it whenever possible to cut down on my cooking time because time is something we dont seem to have enough of. I have baked a lot of different items in my microwave, chickens, all kind of casseroles, cakes. You can even scramble eggs in this one!! It keeps dishes warm until you decide to serve it which is a plus because all microwaves do not have this option. I believe you will enjoy it too!

All of sudden, this expensive microwave stopped heating. Called whirlpool, they said they will charge $300 to fix it and $540 to replace. So much after paying new piece of garbage in 2-3 years.

The Cabrio washer does not efficiently clean clothes! The clothes have a type of lint on them after washing, and our sheets have an odd discoloration that stays on them even after drying. We have a max. capacity washer/dryer, & we dont overload. Plus, we use the recommended detergents and the amount of detergent as directed. Fabrics dont even smell clean.

I purchased a Whirlpool refrigerator, model # ED2FHAX005, serial #SW1126490, two years ago. I have nothing but trouble with the ice maker. It keeps jamming up with frozen cube. While under warranty, I had it fixed but since then, it has happened twice more. The repairman who fixed it said there was a part missing and a part of the unit was melted. Not only that, but the plastic is coming off on the handle. Nobody at Whirlpool will help me. Too bad, there is no warranty anymore. This refrigerator is a lemon. I am so sorry that I purchased it.

I purchased this machine about a year ago and it is the biggest piece of garbage on the planet. The biggest problem is that it will not spin if the load is even slightly unbalanced. It does not clean the clothes. If you try to rebalance and spin the load, it adds more water and then gets stuck in a cycle where it drains and adds water forever. Do not buy one of these. I am finally surrendering and buying a different machine. A total waste of money.

Whirlpool Duet 3.9 cu ft High-Efficiency WFW9451XW00 - Hear my first experience with Whirlpool. I purchased a washer machine 30 April 2014. Guess what - machine stop working suddenly on July 30th, just about three months later. I had a lot of guest from overseas. While they visit me, I did not have my washer machine. How embarrassing. It was big mistake to buy Whirlpool. It is all made plastic inside and they uses cheap Chinese material. Anyway, technician came house to check what the problem was... all control system was burned. He ordered almost 10 parts from Whirlpool on 04 August. Whirlpool scheduled delivery for 20 of August. I called them for them to send the parts faster so my guests could wash their clothes. They send them little faster for August 16. After a day, technician was in the house again. I waited about 3 hours for him to fix my machine. He was really nice guy. He put install all new parts. Just in front of me, new parts broke after 5 minute. Whirlpool still did not contact me about their decision. Today is August 26th... I called them 5 time already - Nobody give me useful info. NO Whirlpool, guys - bad service.

Whirlpool Duet 2009 Model WFW9400SW02 - Worst experience ever with a new Whirlpool front Load washing machine. It broke down with error codes F28, F70, F71 13th month just after warranty and was leaking water. Bought 1 yr 153.00 Whirlpool extended warranty. Many reviews in internet have same complaint. Immediately had it repaired after waiting my 60 days to use warranty, but did not work after the door latch switch and one of 3 main circuit boards was replaced which was over $600.00. That was 2 visits. Fired them and had warranty company send different repair Co. They came twice with a cost of $840.00 and worked for 30 days and then had no power. 3rd repair company came out and wanted $350.00 to order part. I was offered $1195.00 cash or $1499.00 replacement top of line Whirlpool WFL98HEBU. Nice! But only 1 year warranty and I had to pay 200.00 shipping. I decided to take the money since I did not want to risk the break down on the new washer. The reviews on the new washer were not favorable with break down as the main complaint. 4 repairs in 1 year is lemon law on my warranty. My repairs were 4 in 45 days.

I have had my Whirlpool gold series dishwasher for approximately 10 years and it still does a great job washing my dishes. Recently, I found out if I forget to put a dish into it I would have to start the dishwasher all over again rather than it taking up where it left off. Also, the interior is badly stained and unable to clean it.

Our dishwasher stopped working after 13 months. We are a family of 2 and use it once a week. We called Whirlpool and were told since it is past 12 months, they would do nothing but give us the name of a repairman in the area. We called our own repairman and $120 later, the sensor that had malfunctioned was replaced. Quite costly on a $450 dishwasher. Now, after 15 months, the handle on the lower broiler portion of my Range has come off and the screws will not hold because the plastic around them deteriorated. I just called customer service once again, knowing what I would be told and YES was told So sorry, nothing we can do. A new handle will be $45 plus shipping. We bought the refrigerator at that same time and every day, I wait for this appliance to have issues. In summary, Whirlpool/Maytag appliances are obviously made to be disposable after 12 months. They do not stand behind their products and I would not recommend them to anyone.

I have owned two different Whirpool washers over the last several years, and they have both been a very big disappointment. More than that they have cost me money, time, and peace of mind. The Duet was my first experience with a Whirlpool appliance. It was a front load that I replaced the water pump on twice and constantly had to take the front bottom piece of the washer off to clean the trap on. It had been taken off so much that the machine actually just fell apart. It also had some type of mold or mildew problem where it made the clothes smell. It was a constant headache.I was stupid and allowed a salesperson from HHGregg to talk me into purchasing the Whirlpool Cabrio washer. Another huge mistake. Again, cost me time, money and peace of mind. I have owned the washer for a COUPLE OF MONTHS, and the clothes that I have washed smell so bad that I cannot use the washer anymore. I tried to call customer service, but it is impossible to get any help because the lines were so backed up, I have not had the time to sit and wait for an available person. Not to mention there is an extensive process of pushing lots of buttons before you are put on hold to presumably talk to a human being. I assume this is because so many people are having so many problems with their Whirlpool appliances. It is not surprising. I bought a new washer, a GE. It is awesome!When I have the patience and the time, I will try to call Whirlpool again and see if they are willing to do anything about the washer that at this point is just sitting in my garage taking up space. I spent around $600 on a washer I only got a few months of use out of. When we moved it to the garage, we could hear water swishing around, which explains the horrible smell of the clothes. Once I started having the issue, I went online to see if this was an easy fix, and it turned out that LOTS of other people are having the exact problem, to the point where people are trying to get a class action suit going. Do yourself a favor and avoid the hassle of dealing with this company. If you purchase a Whirlpool washer, I guarantee you will be sorry. Trust me, I was stupid enough to do it twice. Hope this helps someone avoid the headache these appliances have given me.I will never buy Whirlpool again. And by the way, Maytag is made by as well as the following: Admiral (Canada), Chambers, Coovert (acs), Crosley (newer fridges, a/c, washers), Danby (8, Estate, Inglis, Ikea, Kenmore (see Sears), KitchenAid (4), Kirkland, Maytag Epic®, Roper, Speed Queen (Canada only), Sub Zero (undercounter ice makers), Whirlpool.

We purchased this Whirlpool refrigerator at the end of July 2018. At the beginning of November 2019 all the interior lights went out at the same time. We called the store where it was purchased, and they instructed us to call Whirlpool. Because a year had passed, they were not willing to do anything other than put us in touch with someone who could service the refrigerator. We already know the repair will cost over $200. That does not include payment for the service call or the labor. At almost the same time we purchased a new Whirlpool microwave. We have also had problems with that. My advice is to stay away from Whirlpool products if you want something that will last longer than a year.

Whirlpool Washer W10740628A - So disappointed! I have made adjustments for a year trying to get clean clothes from this machine. Compared to my previous machine which wore out, I now use more water because only deep water wash provides enough water; I always choose double rinse because if the machine does not clean, I do not trust it to rinse effectively either. I use more Tide than previously per wash; I use more Clorox than previously per wash. Everything from tea towels to heavily soiled jeans show stains and soils after washing. Instructions say not to spread the item in the washer but allow it to stack on itself, so twisted and tangled wet clothes are the result. I try to soak and scrub all visible dirt before I start the machine now; additionally, I use a mop or plunger or my hands to thoroughly immerse the clothes in the washer, somewhat like my mother did in 1950s. What on earth is this about and what is the buyer supposed to do???

Electrolux dishwasher model EI24ID50QS - My husband picked this dishwasher after reading all the good reviews. However, after having issues with it, I tried to post my review and it would not post. I think Electrolux is somehow only posting good reviews and leaving out the bad. I had a technician come out to see why it took 6 hours to go through the cycle along with not cleaning the dishes well. He said I needed to run hot water before starting the cycle and that I needed to prewash my dishes before loading.In other words, its not a dishwasher but a sanitizer. Keep in mind that I rinse my dishes before loading, so I dont have food particles stuck dry on my dishes. So, I used his method of running hot water before cycle is started. It works ok when you dont use your kitchen faucet during the dishwashing cycle. However, the minute you use your faucet, the dishwasher runs for 6 hours! This is the worst dishwasher ever! Not to mention, the control panel is so sensitive that if you accidentally touch a cycle to start, you cant get it to cancel. It is ridiculous. Dont buy! It will be your biggest mistake.

We bought an 80 gallon lifetime warranty electric water heater. We get about 20 minutes of hot water and then cold water. Weve had 2 plumbers out and checked our system and said it has to be the water heater, but they dont want to mess with it in case it voids the warranty. Fine. We called Whirlpool and since the alarm system isnt indicating an issue, they say its not the water heater. We now have to do a diagnostic ourselves to find out if it is the water heater. What? It has a warranty! We are not plumbers! How come Whirlpool doesnt think its their equipment? Weve already had ours checked and it isnt us! So frustrating and we will not buy another whirlpool product again! Not good customer service to promote repeat buyers. Whirlpool, shame on you.

Let me just start by saying I have multiple Whirlpool appliances, and I have always bought Whirlpool appliances in the past. I bought a refrigerator 3 months ago, and it quit working. So, I called Whirlpool to come service it. The service repairman said someone left the freezer door open and it froze up. Two days later, I had to call them back again, because now, the fridge part was not keeping food cold. He came back out and told me it was the compressor. I then in return called Whirlpool that afternoon, and they refused to replace it saying they had to follow their Warranty Policy and they would call me back on Wednesday. They did call back on Wednesday and told me they had located the part. I got a call on Tuesday of the following week and was informed they could not locate the part. I called Whirlpool the next day, and they told me they would have to send it to their Exchange department for review and I would hear back from them in 3 business days. I asked for them to rush my request, but they told they have no way of doing that. I will never buy a Whirlpool product again!

I purchased a Whirlpool dishwasher in December of 2015. It has had very light use, and today I found out the motor needed to fix it (it does not wash the dishes) is going to cost almost $500. Whirlpool used to be a very reliable manufacturer. Obviously, those days are gone!

I purchased a 50-gallon Whirlpool natural gas water heater (12 year warranty) from Lowes approx 2.5 years ago. Just before Thanksgiving, the pilot light started going out once a day, then twice a day. Now, I can light the pilot light in Pilot mode but as soon as I release the red button, the flame goes out. I called Whirlpool and received phone troubleshooting support resulting in a recommendation to pick up a new thermocoupler from Lowes which I did. While searching for someone to install (unfortunately Im not that handy), I ran into the thousands of complaints filed about the very same problem Im having over a number of years and right up to todays date. I called Whirlpool back and got the same song and dance. Theyd be happy to help me troubleshoot if I can get the required meters etc. to test devices, do draft tests, etc. They claimed the problems were fixed with the newer model that I have but certainly cant explain why I have exactly the same issue. What they are not willing to do is stand behind their product and get me hot water. Tried calling Lowes and got the response that I have to deal with Whirlpool. It appears that this newer BFG model is just as flawed as the older model and the warranty is pretty much worthless other than getting a few parts. I used to think that Whirlpool products were reasonably good, however, I will never purchase another.

Whirlpool water heater FG1F5040T3NOV - I noticed that when I was taking a shower, my hot water wasnt working. I went downstairs and the pilot light on my water heater wasnt on. I tried to restart it. The pilot light wouldnt work or relight. I gave up and contacted a plumber. I dont feel I should have to pay for a plumber when its a product flaw!

My mother has had this stove (Whirlpool Accubake) about 3 years. She does little cooking. On June 24, 2015, herself clean activated, probably for a few days, this is normally 850 degrees. She is 84, does nothing with this stove, certainly not knowing how to hit the clean button and HOLD the Start button for 3 seconds... this caused the stove to billow smoke out of the oven and encompass her entire home. No fire, but was caught in time. The fire department had to pry open the door as it would not unlock.

The Whirlpool Gold Series we purchased, to replace the older refrigerator, has far exceeded our expectations. The French Door setup was exactly what my wife had talked about. The saleslady at Home Depot, where it was the least expensive by $283, was very well informed. We went through the specs, colors, types of finishes, etc and picked the perfect one for my wife's needs and wants. The model performs well fully loaded or almost empty. She told a few family members and they went out and bought the same model, or next model up, as we did. To wrap it all up, "Buy this. It performs as well as, if not better, than all the rest."

Front Load Washing Machine, Model WFW97HEDBD0 - This is the worst appliance we ever owned. Purchased in 2015, multiple problems since! 1. Soap dispenser did not dispense and leaked down the front of washer... 4 service calls, control panel finally replaced, clothes not clean, leaking continued. Had to place soap into washer drum. 2. Pedestal drawer made grating noise, track off, drawer replaced, opened better but still made irritating noise. 3. Grease oozing from side of washer both sides. Decided to look in back of washer and OMG! A copious amount of grease is also beneath & behind the washer & dryer. I had to scrape with a metal spatula device to pick up and it took over 1.5 hours to remove & clean. We are lucky a FIRE did not start when using either machine. This machine was a LEMON from the beginning. In fact when we were having it serviced, I stated I wanted it replaced but was informed 2 visits were counted as 1 and did not qualify for further investigation. We cannot rid ourselves of this machine fast enough after the last issue. New washer coming tomorrow, not a WHIRLPOOL! New machine is LG WITH 10 year warranty on motor.

The only model number I can find is W10484489A.... Do NOT buy this machine. It is pathetic!! This machine cannot handle more than 2 bath towels at a time!! It will just keep trying to spin, yet NOT spinning, then when you stop it, there is no choice to just spin again, you have to rinse and spin!! Unbelievable.... takes a whole evening to do one load of towels!!! (actually a whole evening to do 2 towels) I hate it!!! Not to mention, whatever they designed between the tub and the door, a rubber whatever it is, is nothing but a catch for disgusting bacteria and slime. Considering the amount of wash I DONT DO, this is unacceptable, even though I have bought and used the new washing machine washing stuff!!! Honestly.... had a Maytag Neptune before this machine..... that is the way to go folks, pay a little more, but way more satisfied. Cleaned like a gem, unlike this whirlpool, cleaning is at best mediocre!! Unfortunately, I broke it, asking it to wash huge 120 in round table cloths for my business, and heavy chair covers..... Had I have know.... cant even wash 2 towels in this new Whirlpool machine!! It is heading to the curb with all its disgusting places you have to clean, I will pay someone to take it away, seriously cost me a ton of money in re-spinning (or yeah, and re- rinsing, cause you cant just spin something), would have been better to fix my MAYTAG!!! I hate Whirlpool!! Do not buy one!!

My microwave came with my house. I didnt choose it but it has been a great brand. I love the preset timers for defrosting & for popcorn. Its big enough to handle an 8x8 pan which was important to me. The turntable could be more stable. My model is a built in over the oven option. Black & digital. It has lots of preset options & is pretty user friendly. I like the size & it is super quiet.

I bought a Whirlpool refrigerator in April. The motor ran constantly. The company replaced it for me but it was back ordered until July. The one delivered in July kept freezing the items in my refrigerator. I had two service people come out to replace parts in the next couple of months. The entire time having to throw out frozen food. Finally, they had another one delivered in November. This one continues to freeze food in the refrigerator. Mind you, I just got it and they want to start again with service. Seems others are having the same issues. My 4 month old gas oven is also not broiling. Customer service is awful. Every time I call the wait time is over an hour and then they don’t really help. I would not recommended Whirlpool to anyone.

Absolute junk. Bought an entire matching set 2 years ago. Fridge, microwave, dishwasher and oven. Oven is the most user unfriendly thing I have ever bought. That’s my fault. Microwave failed. 300 to replace. Ice maker in side by side fridge failed, another 300 dollar fix. I used to have a field mouse or two get into the house every year. Don’t have that problem anymore because the fridge is so loud it scares them off. Talking to Customer service was the most frustrating thing of all. They think if they say your name in a nice soft tone long enough it will make everything ok. Mother and father raved about Whirlpool products. How times have changed. Do yourself a favor and steer clear of these products. Also, look up the other brand names made in the same factory and steer clear of those as well. I used to think appliances were all the same. How wrong I was. Do your research. It will save you a bundle in the long run.

My washing machine is a front loader. Previously I would not have purchased one, but after using it for a year or so I have changed my mind. As long as I do not overload it my clothes come out perfectly clean using cold water, and partially dry so needing less drying time.

Bought this side by side, Whirlpool with ice maker and water dispenser in April 2013 at Home Depot. From the beginning, we have NEVER been able to get any chilled water out of the refrigerator. Sometimes the water is even warmer than the water out of the tap. Repeated attempts to fix and now Whirlpool tech Tom, told repairman, sorry this is normal, no refrigerator can guarantee temp of water.” Ive NEVER had a refrigerator with a water dispenser not chill the water much less, come out WARMER! HORRIBLE DESIGN & BAD COMPANY POLICY! Will NEVER buy another Whirlpool product!!! Now its dripping water inside fridge! Model #: WSF26C2EXW01 Ser#: HR30821156

The knobs on the Whirlpool gas stove model Super Capacity 465 AccuBake system are easily confusing and dangerous. If the knob is turned in the wrong direction when intending to turn the burner off, it turns to a very low setting which is although nice for simmering, it is very easy for it to be mistaken as the off position and leaves only the gas leaking if the smell is not noticed in time.

Recently bought and had a Whirlpool Cabrio Washer (from Orvilles appliances) installed in my home. The very first day I hated it. Worst purchase I have ever made. I spent over an hour picking hair out of my clothes, and hair was also stuck in the crevices of the drum. This is the very worst machine and company I ever had to deal with. They told me, Too bad. Since there was no mechanical problem there is nothing they will do. I will never deal with either of these companies again. I cant wait to see what the hair build up will do to the machine itself, Had it less than a week.

The oven is a joke. It does not self-clean. I have to buy oven cleaner and clean the oven like in the distant past. They are lying about it being self-cleaning. Do yourself a favor and buy a real self-cleaning oven. NEVER WHIRLPOOL.