I purchased a Whirlpool Gold French door with the bottom freezer in October 2013. I had one repair done while it was still under the 1 year warranty, but by the time it was 18 months old, it began leaking refrigerant. I was told by the technician that the cost to repair it would be more than the value of the refrigerator, and the chances of the repair lasting more than 6 months were minimal. I had to buy a brand new refrigerator (not a whirlpool this time). I contacted Whirlpool customer service but they were non-sympathetic. Do Not Buy Whirlpool Products - Poor quality and high prices.

Piece of crap. We built home 2 years ago and have all gold series appliances! They are all CRAP. Wish we would’ve upgraded to KitchenAid. Dishwasher won’t wash, microwave has hot spots and has to be unplugged and plugged back in often to work. Freezer side of the refrigerator will stop making ice because it freezes up often! NEVER buy Whirlpool!

I purchased a new Whirlpool 29 cubic ft. french door bottom freezer Refrigerator 11-22-2013. On 4-18-2014, I noticed water on the floor and realized my ice maker had quit working and the ice melted. I called Stantons APL. where I purchased it from and a service tech came on 4-22-2014. He checked the fridge out and after five mins said this is a model that has a known defect in it and it would have to be totally rebuilt. I then called Whirlpool and told them I want a new Refrigerator. I told them I paid for a new appliance, not a rebuilt one. The Whirlpool rep said they would need a second opinion and scheduled a different company to come out for service. This happened on 4-25-2014 which by this time I lost all my food in ref and freezer. He was there about ten mins. and said its gone out and it will have to be totally rebuilt. He calls Whirlpool tech support to help him figure out how to take out bottom door because he didnt know how. WHIRLPOOL tells the tech they want him to tear my refrigerator apart and run diag. test on it to see how it performs under certain codes. I tell Whirlpool they can run all the test they want after they replace my refrigerator and my food. The Whirlpool rep says, That aint happening. So I say, Then I need to talk to your supervisor. After going through four supervisors, I finally get to the person who reluctantly agrees to replace the refrigerator and says give her 24 to 48 hours to make it happen. 60 hours, still waiting on a response. Will let you know what happens. Shame on you Whirlpool for deceiving the public.

We purchased the Whirlpool Gold Gas Range (model #GW399LXUQ06) in November 2011. Last week, I noticed the porcelain enamel finish on the stove top grates has fallen off in pieces. I contacted Whirlpool today, February 14, 2012, about this issue and they advised me it is a cosmetic problem which is not covered under the warranty. They advised me that it would cost over $100 per grate to replace. We have had this stove for less than three months and I feel these grates are defective and Whirlpool should be responsible for replacing them. I am very dissatisfied with this stove.

After having the ice maker replaced on our 14-month old Whirlpool refrigerator, things seemed to be working fine for a while. However, now there are puddles appearing on the floor in front of the refrigerator. This is a freezer-on-the-bottom model and the ice maker is at the top so I was fairly certain it has nothing to do with the ice maker. Turns out there is something dripping into the back of the freezer and over time it builds up a giant ice sheet on the bottom of the freezer compartment. When the ice sheet gets large enough, the dripping water flows out onto the floor. Now Im going in every couple of weeks and chipping the big ice sheet off the bottom so it will stop leaking for several weeks. When I see puddles in front of our refrigerator I know its time to go chip the ice sheet out again. Seriously, I dont think Ive ever had a brand new, and expensive, appliance perform so badly. Whirlpool... never again.

My Whirlpool microwave heating plate is not rotating properly.

Had washer for 5 months. It now has a door latch error. It has been 3 weeks and it is still not repaired. Parts take a week to 10 days to get. We are now going back and trying the original part ordered. Not sure if this will fix it this time, as it didnt the first time, but we have no choice. Whirlpool will not stand behind their product and give us a replacement and for good reason, it is obviously junk and we will have the same issues in 5 months. Calling their help line is a waste of time, they understand your frustration but do nothing to help relieve it. Their supervisors have the ability to do nothing and excel at it. Thought this was a good product when we bought it but are now suffering for this decision.

I purchased a brand new Whirlpool Cabrio Washer from Sears less than 5 years ago and am junking it! It has all the same problems everyone else has mentioned. I have had it serviced for faulty motherboard, unbalanced tub, broken lock mechanism. It had rusted out on the inside. Clothes are never clean and it constantly becomes unbalanced in spin cycle. We have to stop and rebalance every single load 3 or 4 times--or more if trying to wash a set of sheets or two or more towels. Cant leave the machine unattended for even a few minutes. I might as well be hand washing on a scrub board at the edge of a river! Waste of money and Whirlpool Customer Service wont say anything but should have purchased extended warranty! What a load of crap from what was once a reputable company that used to make a reliable product. WARNING--NEVER BUY A WHIRLPOOL WASHING MACHINE!!!!!

We purchased an over-the-stove Whirlpool microwave in January 2011, when we remodeled our kitchen. In May 2014 after a loud pop, the microwave stopped working. This was Model # GMH6185XVS-1. Of course, the warranty is no longer in effect. I feel a high-end appliance that cost $500 should last longer than 3 years. I will not purchase another Whirlpool product.

Purchased Whirlpool set from Lowes March 2016. Washing machine is not worth the metal its made from. Clothes are dirtier after the wash. All white linens are ruined! Clothes wont rinse or spin dry. Whirlpool wont reply nor will contracted repair return. The last repairman told us we would be better off taking the clothes out back and wash with hose because the Cabrio is useless and nothing can be done to fix it. I contacted place of purchase (Lowes). They wont help due to not buying warranty thru them. Stuck with the worse washer ever... never again Whirlpool.

Problematic... constantly out of balance... and will Not spin out due to this.. Sensors are very sensitive... have to unload and reload.. Most times have to wring out by hand.. Definitely a defect of these machines.

I purchased 5 Whirlpool appliances when I moved into a new home approximately 5 years ago. The selection buttons on the plastic panels on the front of 3 (dishwasher, washer and dryer) out of the 5 appliances has either broken completely through or are in the process of breaking through, leaving an ugly appearance on the front of the appliances. When inquiring if I could replace these panels, I was told that one (dishwasher) would cost me $100.00. I believe that the structure of these panels has been extremely poorly manufactured. Why would you put perforation around each button? It is obvious that they would push through. What can Whirlpool do for me?

Dishes are very clean and the machine is very quiet. Only downside is the silverware in the door is not easy to load. The layout is very good with easy adjustments. Again, the downside is the silverware in the door is inconvenient. The easiest way to load is to basically leave the door partially open. With the door fully open you have to slide the silverware in sideways where it also tends to catch on other silverware. Perfect for 4 people. This was the best looking stainless steel dishwasher for the money. Whirlpool Gold Series.

Here in Brazil, we use to have a very good brand of durable and reliable refrigerators and home appliances called Brastemp, and I was a very happy, fidelized customer of theirs. The time came for me to move to my new house. I gave my old appliances away to friends and modeled my new kitchen with Brastemp products. What I didnt know then is that Whirlpool bought the brand in 2000 and was selling their appliances over the Brastemp brand since.Whirlpool is clearly selling disposable appliances here. My vacuum cleaner failed after a week. My brand new refrigerator and laundry machines failed weeks after the one-year warranty and the dishwasher sometimes heats up and tips the 20A circuit breaker (suggested by the manufacturer), which is only for the dishwasher. For my complete surprise, my old appliances are still functional in my friends house. I got my old dishwasher back and I had absolutely no problems since.The vacuum cleaner failed again, this time 5 months out of warranty. In all fail cases, the price to fix it was about 70% of the price of a new one, which I took as a sign to replace them for something else. Good job, Whirlpool! You bought a nice brand, trashed it and gave the finger to fidelized customers you acquired with the new brand by replacing quality products with built-in obsolescence others. What do you plan to do next? Whatever it is, dont count on me as a customer ever again.

I purchased a new Whirlpool Cabrio Platinum washing machine 2 years ago. Do not like it at all. Does not get my clothes clean. Pulls threads in my clothing. When I wash clothes on the normal cycle they are barely damp when the cycle is finished. When I use fabric softener it leaves blue spots on my clothes. I cannot afford to buy another washer so Im stuck with this one until it breaks. I would NOT buy another Whirlpool high-efficiency washing machine ever again.

This was a substitute for model I actually wanted, I was told the one I would receive was the newest model version of the model I wanted. What that meant was it was the stripped down version. It does not get clothes clean nor does it spin/balance the load which causes it to walk around the room. It is only 9 months old and I need a repairman.

I purchased a whirlpool gold series microwave model #WMH76718AS one and a half years ago, paid $500.00 for it. It stopped heating. Everything else works on it so it looks like I paid $500.00 for a digital clock and a fancy bread box! I went online and read complaint after complaint that the same thing happened to other people. It appears that the magnetron is faulty. I called Whirlpool and asked their service rep how she would feel if she bought a microwave and after 1 1/2 years it wasnt working. She told me that it was man made and that I should EXPECT things to go wrong. She did offer to pay for parts... which did surprise me. But I have to pay for a $45.00 service call and all labor that it costs to fix it. I called the number she gave me and got a answering machine.... still waiting for them to call me back. I most likely will just throw this Whirlpool piece of junk in the garbage where it belongs. I dont want to spend hundreds of dollars to repair a lemon. I feel that Whirlpool knows there is a problem with their product... that is why they offer to pay for parts. But why should their mistake cost their customers money on top of all the inconvenience. Whirlpool does not back their products or care about their customers after they get your money. I will Never buy a whirlpool product again and that includes anything from their sister companies Maytag, Kitchenaid, Jenn-air, Amana and there are many more. So before you buy anything make sure you check to see who you are really buying it from!

Have always bought Whirlpool appliances and never had a problem like this. Open the door on the top loading washer and its rusting out. I am having to buy a new one but considering other brands. No complaints about the matching Dryer.

I could echo all of these complaints and more. I just gave up on the heater, junked it, and went to Home Depot and bought a Rheem. Recommendation: NEVER BUY A WHIRLPOOL!

I absolutely hate this expensive piece of junk. I have tried everything, and my clothes are not clean. It is only myself, and my husband, and our clothes dont get very dirty. I would like to send this junk to the junkyard, but I spent a lot to get the dryer with steam that went with the washer. This experience has soured me on Whirlpool appliances, and now I learn they also make appliances for Maytag!

Whirlpool Cabrio HE washer - Purchased my set in 2007. Has not worked properly most of the time we have owned. Lid locks our clothes in when the machine malfunctions and we have to barter with the machine for hours of Google suggestions to get the clothes back out. Still dirty. Or still soaking wet, not spun. Ive never seen so many error codes from one machine. I would never purchase this brand again. The only pro is the load size, which trust me - we have spent more time, water, energy & $$$ with the washer not properly working than the large capacity has saved us.

Im glad to see that Im not the only one that is dissatisfied with Whirlpools products. Three weeks ago I found my basement to be flooded and you could tell that it was from the hot water heater that was installed in 2005. The plumber changed the release valve. I thought that was it. This past Wednesday I go down the basement and find another flood. The plumber said pilot was not lit. The explanation was wind could have come down the chimney and blew out the pilot. Pilot was relighted and within 12 hours there’s cold water again. I called the plumber again and said that the thermal coupling must have gone bad. I went to Lowe’s to get a replacement and found that Whirlpool is sending a free replacement but I would have to pay shipping. All well and good, but what do I do in the meantime for hot water? If Whirlpool made a mistake, why didnt they send the replacement parts to the businesses that sell their products? I guess that would be the simple solution; instead, they expect me to pay $30.00 for shipping and be without hot water. Well, let me tell you: Im tired of this hot water heater. Whirlpool can go out of business for all I care because they dont stand behind their products. Im going to buy myself a Rheem and Im sure Ill be a lot happier. Need a new hot water heater? Don’t get a Whirlpool!

I have a two year old Whirlpool dishwasher. The soap dispenser cover broke shortly after the warranty ran out. It cost 100.00 for repairs. A year later, it broke again. I sent a letter and the part to the CEO of Whirlpool. They sent a repairmen to fix it free of charge. When you have a problem with a Whirlpool product go to the head of the company. If they get enough calls they will make better parts. Call 1-269-759-6919. Write a letter, return request receipt. It takes a little effort, but it helps a lot of people.

Worst service ever. This is my 4th refrigerator (I have 2 homes and moved a few times) and I have NEVER heard of a compressor going bad in 8 months. This was a new fridge, and all of my food went bad along with my infants milk. I cannot express how upset we were, and Whirlpool told us that they cant do anything for us, and it was just something that happens. Basically, they told me, Sorry for your loss... you should buy a longer warranty since this is not covered if it happens after a year. This is Whirlpools way of telling me, we dont care if you use our product. I am amazed that they wont give us even a credit for what happened. NEVER BUY WHIRLPOOL.

The oven steam cleans the oven but it only cleans the bottom, not the sides, back or door. They dont recommend oven cleaner so how do you clean it? My oven is a year old and looks like its never been cleaned. You would be better off with non cleaning oven and using oven cleaner. It would be less work. Horrible stove.

I bought a Whirlpool Cabrio washing and dryer in 2011. I have replaced the lid on the washer 3 times. It comes apart in the back of the lid and it will not lock in place so it will perform. I have called the manufacturer several times. They have not been of help as to why this happened. Im upset. They have no suggestions. I have owned Whirlpool appliances for years and this is the 1st time this has happened with no resolution. I just want it fix or explain why its happening.

In January 2011, we bought several appliances and a refrigerator was one of them. The model number is G15VAXVQ01 which is a side by side, French Door Ref with water and ice on outside. We have had problems with the very cheap plastic drawers that are at the bottom of the refrigerator to hold vegetables and meat. We have to be extremely careful so they will not break when opening the drawers. As of late, the fruit and vegetables have been freezing. I went to change the temperature on the outside gauge and dropped the control to 33 degrees and it stuck there. I tried to unplug the refrigerator to reboot the system, to no avail. The temperature is stuck at 33 degrees which will freeze most of our food in a few hours. The freezer side temperature gauge does work.We also have problems with the ice/water machine. I pushed the water button a week ago and from then on, I couldnt get the ice to come on. I did unplug the refrigerator to reboot and then I was able to switch over to the ice, but I could not get back to the water side. Also, there is no crusher on this machine so the ice comes out in chunks. If we had to do over again, we would not buy a Whirlpool as it appears that they are not interested anymore in quality products and consider cheap junk something to be desired. Not by us! We will get this albatross fixed and see about getting rid of it. It is a buyer beware market so I suggest others beware of Whirlpool products.

We bought a Whirlpool French door fridge model WRF989SDAM00 in 2013 and were impressed by how it looked in our kitchen. Its December 2015 and things have started to go wrong. First the freezer stopped freezing items completely and found out that ice had built up on the cooling tubes inside the rear freezer wall. Had to be taken apart and thawed with a heat gun. Now the freezer freezes on and off and the ice maker is not making ice properly and leaking all over the left side of the fridge. Went to Sears {place of purchase} and we were asked immediately if we had purchased the extended warranty. We hadnt and were told Sears could do nothing and that these newer fridges have a tendency to have trouble within the first couple of years and thats why they recommend the extended warranties. Really a $2500 dollar fridge a couple of years? Had a local appliance repairman look at it and he said the compressor was bad. $500.00 to fix. Boy do I regret buying this thing. These big companies just walk all over us consumers.

We wanted the ease of use and longevity of a top loader WITHOUT a full touch screen. Whirlpool has such units in a choice of price levels to accommodate most everybody. The agitator free design and automatic water level feature is amazing. Clothes are nice and clean and uses about the same amount of water as flushing a toilet.

I have had the same lid problem with our washer. New in 2010. The lid just broke in the same place for the 3rd time! Called Whirlpool customer service. Yes they can find my account. No, they dont have a record of this happening to this washer before. Even though I called them and got the lids through them two other times!!! But they will be happy to send me a new lid for $260!!! Also love the fact that they dont acknowledge the lid is a problem. Time to find a new washer that isnt Whirlpool!!

First of all, Whirlpool is fully aware of the problems with water heaters and intentionally places requirements on the consumer until they give up. This info from a distributor. I bought 30 gal. gas water heater 7 months ago. Six days ago the pilot light went out. Went to Lowes (purchased there) and bought a replacement. Wrong one. Returned to store and was told they dont stock repair parts, call factory. Monday called warranty number. They offers to send thermopile, it would arrive in 5 days. I paid $30 for overnight. Plumber installed new part. Still doesnt work. Whirlpool says have the plumber call them theyll walk him through troubleshooting. I ask, Whos paying the plumber? They reply, You are. Plumber calls Whirlpool. They tell him to clean the screen. He does. They tell him to disassemble the burner. I stop plumber. I ask Whirlpool, What if its not the burner? They reply, Then well troubleshoot something else. Meanwhile Im 5 days without hot water. I go to Lowes where heater was purchased. The manager thought it funny Im another victim. I ask, Why doesnt Lowes stock heater parts? He says because Whirlpool doesnt let them carry parts. Im beat. I surrender. Parts from Whirlpool would take another 5 days and theres no assurance itll work. Lowes refuses to assist.I go to Sutherlands and buy a $450 Rheem on recommendation from plumber. Manager from Sutherlands hears my sad story and writes on receipt: Any warranty failure and Sutherlands will replace water heater free. He signs his name on receipt. I pay plumber to swap out heaters. Anybody want a 7 month old Whirlpool water heater. Like new. Cheap! By the way... I originally went to a major appliance parts store asking for a thermocouple for a Whirlpool. The three guys at the counter started laughing Hey we got another one looking for Whirlpool parts. They didnt have them either. Lesson learned.

I bought a Whirlpool washer WTW4800XQ top loader. I have owned it for about two years and now it has tore up, the repair bill will cost almost what I paid for the washer. I feel it is bad business to sale something and it not last any longer than it has. No one should have to buy a washer every two years!!!! When it gets to the spin cycle it works fine and then all of a sudden it will beat and bang and if you dont get it stopped it will be in the middle of the floor. Im very upset and put out with Whirlpool!!!!

Water saver does not provide enough water to wet the clothes. Even deep wash cycle does not provide enough water. This is right from the start. We should have returned it the next day rather than trying to learn how to use it wasting time so it could never be returned. I rated them as 1 star because there was nothing less I could have given them. DO NOT BUY ANY WHIRLPOOL PRODUCTS.

After 2-1/2 years we started having trouble with the spin cycle on our Maytag washer. We live in an area with no repairman. Whirlpool want us to pay just to talk to us. Now the timings off. It will not spin out.

Got a simple error code E6 F2 on the display of my oven (only 8 years old). Called Whirlpool to schedule a repair. They told me there were no available dates for one of their techs to fix my unit. They referred me to 3 outside companies that wanted to charge me over $100 just to come out and take a look. One of the phone numbers to the companies they referred me to was a wrong number. I asked them to tell me what the error code means and they said they couldnt tell me with any degree of accuracy. (What use is an error code, then??!!) I checked all over the internet and different websites say it might be a control board (over $300 for the part) issue. But several techs also said that it is a crap shoot and could also be a Temperature Sensor. I called back Whirlpool to see if they could get me a deal on the part. But, guess what? They dont sell it anymore...in fact they dont even sell their own parts at all!! And, they transferred me to some outside company that refused to even give me part numbers, to avoid me shopping for a better deal (which I did end up finding on Amazon after number 6 below). I called back Whirlpool and after getting transferred around to 2-3 different people and wasting about an hour I finally got someone who finally wanted to just give me whatever decent service they could and they finally got me the part numbers of the 2 different control boards (Main Control Unit and Sister board that controls the locking mechanism, $367 and $140 respectively). Now I am faced with paying an Appliance Repair person over $500 for what seems to me is a BIG FAT LEMON of an appliance due to the sheer number of unsatisfied people that are having the same issue, have had it fixed, and had the error just return again. THUS.... WHIRLPOOL AND THEIR CUSTOMER SERVICE AND THEIR PRODUCTS JUST SUCK!! AND I WOULD NOT RECOMMEND THEM TO ANYONE! THE LEAST THEIR COMPANY COULD DO IS TRY TO HELP FIX THE PROBLEM, NOT EXACERBATE IT BY GIVING SHADY CUSTOMER SERVICE AND REFUSING TO HELP FIX THE PROBLEM!!!

We purchased a 50 gallon water heater that claimed to come with a 6-year warranty on parts. Its been a little over two years that we owned the product, and we noticed rust on the bottom. We checked to make sure if water or even moisture is visible from the outside - nothing. The problem is obviously coming from the inside. Since we have warranty, we called them and got nowhere! We were told that it is just cosmetic. They refused to send out a technician to take a look at it. We even emailed them pictures (see pictures) and still nothing, no service. Their warranty is a joke. We will never by any Whirlpool product ever again. Dont believe the sticker that claims you are covered for a certain amount of time. When it comes down to it, they will not do anything for you.

Its just a plain refrigerator. No bells and whistles. It could have more space in the bottom and well as a ice machine or ice maker. Nothing special about it. Just a place to keep food. The light in top could be higher so food does not touch it.

I have a front load Whirlpool Washer and it has leaked within 6 months of having it. The rubber piece was replaced and it still leaked. Whirlpool wont take responsibility for its product. I have to put towels down around the washer every time I use it because it leaks. I purchased this because it is more economical to use a front load but not when water is leaking from the washer.

Cabrio WTW8200YWO - We purchased this washer five years ago. About a year ago it started getting noisier and noisier on spin cycle. Now it sounds like a jumbo jet taking off. A Google search quickly revealed this is a ubiquitous problem with these washers. As we are in our 70s and dont have kids at home, we are very light users of the washer. First, I would suggest that no one buy this washer. Second, I suggest that Whirlpool should recall these washers. I called Whirlpool and it turns out they clearly know about this issue. The good news is they will offer you a discount on repairs or even on a new machine. The bad news is it will still cost you several hundred dollars to fix their design defect. I suggest that you avoid purchasing Whirlpool products both because of their defective design and because of Whirlpools unwillingness to take responsibility for these problems.

I bought a Whirlpool washing machine, model WTW4855HW, and was I ever shocked at how noisy it was. The wash cycle had a grinding noise that was just too much. After 2 loads I sent it back and didnt regret having to pay the restocking fee. I just couldnt believe that with all the technology we have today, that they couldnt build a quiet machine. Im an engineer so I know there are methods through gearing, belts, soundproofing, etc, to produce a quiet machine. Remember the dishwasher of days gone by. You couldnt watch TV with the dishwasher going. Nowadays, you can stand in the kitchen and have a nice conversation with it running. The technology exists. As a matter of a fact, my old Maytag that finally went bad after 10 years was fairly quiet. So, if you dont have your washing machine in the garage or basement room where you can close the door, dont buy this machine! Bruce in Portland

I purchased the Whirlpool washer in February 2019 and delivery was in March. As stated in my previous reviews for the manufacturer, and subsequent repair calls, three; from the first time using the washer, it didnt fill properly for the amount of the clothes in it. A piece of paper towel never got wet through the whole wash cycle. I had to resort to raising & lowering the lid numerous times to get to the correct water level; adding water with a container or just pressing down on the switch under the top cover; 4-5 count. Needless to say very time consuming. As for hot water for doing white clothes, forget about it! It seem to me its the same problems with this whirlpool washer thats been happening with most of the other reviewers/purchasers. Did Whirlpool ever think about taken back one of these problem washers and checking it out for themselves? Maybe installing a clear plastic lid to monitor water levels at different wash cycles? Hot water temps when called for? Are these negative reviews ever seen by Whirlpool? Or in the trade is it called.... JOB SECURITY? Any more detail required? Cabo

I chose based on the current ratings of the machines. They look nice and they can handle large loads. I think EPA has changed wash machines to be back into the 1920s. I put my clothes in and there is no agitator in the center. My clothes come out twisted tightly into little round circles or balls, not much water but now it takes over an hour to wash my clothes. So we are conserving water but using more power, I also have to iron sheets and clothes because they are so twisted and wrinkled. I used to stick my clothes into the washer, select a cycle and go on my way and now I have to answer 5 other selection options, if I dont hold the button in long enough it just turns off.Have we all lost our minds, I think this is going backwards not forwards. I have talked to other women and they agree with me, we HATE these new washer and dryers. The dryer is a little better but not much. Also the tops are concave so your laundry basket falls off, and you cant put your soap on the dryer which is where I am used to having it. Now I have to clean my washer every 30 cycles, iron and it takes all day to do the laundry, yes and they call this progress, really!!! I purchased the Whirlpool Cabrio W10607 425A- SP and dryers Whirlpool W10680129C-SP, these are full size and have the steam options on them and are side by sides.

I bought a new washer and dryer 2 years ago, it was built by Whirlpool under the Kenmore name plate. In the first two weeks we had them come and service it as it was very loud in spin mode. The serviceman said they were all like that. Now, two years later, it is so loud you cannot even carry on a conversation while in the spin mode. Called for service again. After two minutes he says, You better buy a new washer, this one will cost over $800 to fix. Never will buy another Whirlpool appliance or Kenmore again. Buyer beware!

Avoid Whirlpool at all cost. I have had the GSS series, which was horrible. It was declared unfixable by service after 2 weeks of ownership. It was replaced with a similar WP model WS series and was told it was basically identical to the GSS series except for some cosmetic differences (They do look identical and yes, it’s just as horrible as the GSS.). The first one was defective from day 1. It was replaced and assured the next one would be thoroughly checked out prior to delivery. Obviously, nobody did this (was still in box and never opened). The fridge arrived and had the same exact defects as the previous units. Service literally said these were junk and they had nothing but issues with them that they simply cannot fix, and issues Whirlpool is obviously aware of but will not admit to, nor back up their products. Service literally told me to avoid WP at all cost or I will have nothing but non-stop issues and non-stop service calls and the fridge will still not be fixed. I purchased the extended 5 year warranty that clearly states that the fridge will be fixed or replaced if deemed non-repairable. Mine was! Yet, neither Whirlpool nor the retailer will do anything. I was literally told Take it to the dump and go buy a new fridge by both Whirlpool and the retailer. My purchase was less than a year ago. The 3rd fridge has only been here 3 months. They took my $1,500. They took my money for the extended warranty. It has been declared non-repairable, yet Whirlpool’s and the retailer’s response is Too bad, we are keeping your money, not honoring the warranty. We don’t care if it’s non-repairable. Take it to the dump and buy a new one.This is new! The money it cost, the money for extended warranty, the money for lost food, the money for lost wages due to having to be here for repeated service calls, the huge amount of time spent using hair dryers and everything else under the sun (this fridge must be baby sat and monitored pretty much 24/7 due to more issues than I can list). The fact this fridge has taken over my life, with freezer and fridge unusable (totally unusable, it has taken over my life, but I still can’t use it and spend a fortune getting take-out food) is just shocking, but more shocking is the fact neither WP or the retailer (the blue one that starts with an L, ends with an S and competes with HD the orange store) will stand behind the product or the warranty and instead is telling me to flush multi thousands of dollars down the drain and take my new, with extended warranty, to the dump and buy a new one. Calls to both companies only led to more wasted time and frustration.I don’t even see how this can be legal. They happily took my money. They fully explained how I needed the extended warranty in case something like this happens and assured me the extended warranty would protect me in case something goes wrong for 5 full years. They will replace it with a new one if un-repairable. Yet in less than a year, Ive gotten 3 defective ones with the last one only 3 months old with the first service call made on the day after delivery, but I’m supposed to throw all this money down the drain, take my new fully warranted fridge to the dump and buy a new one?!Shocking and not something I can afford to do. If I could afford it, I would get this thing out of my house in a heartbeat and buy something else, but I’m not made of money so this is not an option. Not sure what I can do other than to warn others to avoid Whirlpool and avoid the retailer (L---s). I’m just in shock and to say I’m upset would not even come close to describing my utter disappointment and frustration with both companies and this whole ordeal (never ending nightmare is more appropriate).

I purchased a gas hot water heater from Whirlpool. I have had problems with it since it was new. Whirlpool kept sending repair parts, which I installed, until the warranty expired. Now they say “Sorry Charlie, the warranty has expired.” The water heater has never been fixed. They just dragged it along until the warranty expired. Whirlpool has no complaint department or the repair place will not give it to you. They told me there would be no use for a complaint department. They would just tell the same thing the repair was telling me.

I have a Whirlpool 33 inch wide Side by Side refrigerator. WRS311SDHM. This is the worst refrigerator I have ever had. Temperatures are inconsistent. It is less than a year old. Initially, I stored the big container of spring mix lettuce on the bottom shelf of the refrig as it wouldnt fit in the crisper draw. The temp setting in the refrigerator was set to ideal. Oddly though, in the freezer, ice cubes were melting and refreezing creating a massive frozen block. So, I raised the temperature in the refrigerator, but kept the freezer at coldest. However, I noticed that when I set the refrigerator to a warmer setting, ice cream became cold soup despite the coldest setting.I called Whirlpool and a service technician from Georges Appliance in New Providence, NJ came to my home (of course I had to take half a day off from work). He stuck a thermometer in the freezer and said, its working fine. While at my home he called Whirlpool who said that if lettuce isnt kept in the crisper drawer it will freeze (silly woman, dont you know that?) and ice cream will get soft in the freezer if the temp in the refridge is warmer than ideal. So, it seems I can have lettuce or ice cream, but not both. Okay, so I put the temp back to ideal, bought smaller packs of lettuce that would fit in the crisper draw and called it a day. Nope....lettuce and anything else in the crisper draw freezes too. Wilted, soggy lettuce is so nice in a salad and frozen baby carrots can break your teeth.I have been on the phone with Whirlpool executive dept several times. They offered to have another service company come out to look at the refrigerator. This repair company would not give me a 4 hr time frame until the day before the actual service call. This might be okay if you work from home or are retired, but this is not my case. I opted to not have them come. This is my last Whirlpool product. Since KitchenAid and Jenn Air are owned by Maytag/whirlpool, my other options are LG, Samsung, GE or Sub Zero.

AquaLift cleaning system does not work. My oven was barely dirty and I had to scrub with the special sponge to remove baked on food after I did the cleaning system twice! Rust is also showing up on the drawer which they refuse to repair because it is ONLY COSMETIC! Stove is 16 months old.

Two and 1/2 years prior we bought a new whirlpool range - W10201511 WHT. After one year we had to replace a computer module at the cost of $500.00. One year later we encountered the same problem. Today we went and bought a new Kenmore stove rather than keep putting good money after a bad Whirlpool product. Very disappointing.

This microwave has crack everywhere and its barely 3 months old. When I want to use it, it makes this weird noise and then it stops. I have not talked to Whirlpool yet, but Ill see what theyll say. My recommendation right now for all those individuals trying to purchase a microwave, dont even look at Whirlpool brand, they just ***.

2007 we purchase a Whirlpool Casio washing machine. Rusted out in three years. 2008 we purchase Whirlpool gold dishwasher. In two years the front panel rusted out. We replaced this panel and now the second one has rusted out. According to Whirlpool they do not cover rust. When we replace the washer it was with a Samsung. NO SIGNS OR RUST IN THE LAST THREE YEARS. When we replace the dishwasher it will not be a Whirlpool. As far as I am concerned, Whirlpool products are junk.

Do not purchase Whirlpool smart freestanding gas range model number WFG975HOHV. I purchased the range and the refrigerator around Christmas of 2018. The first time I turned the oven on to make Christmas dinner the carbon monoxide detector alarm went off. I have tried to use the oven twice after that and the same thing happened. The oven also never gets to 350. I spoke to Whirlpool who said to unplug the oven. They stated a technician would be sent with a carbon monoxide detector and to conduct repairs. The technician came and could not get the oven to 350 and the carbon monoxide detector alarmed. He stated he has to order parts and return to complete repairs.This is a brand new oven that I could not use because the carbon monoxide alarmed and the oven was not heating to 350 because it keeps restarting every few minutes. So here I am not able to use the oven for over a month and waiting for parts for a brand new range. Do not waste your money on Whirlpool products. Also the customer service has no empathy knowing their products are defective.

Whirpool WFW9550WW-00 Front Load Washer - Washer was purchased 08/09/12. No problems until 07/12/15 when washer stopped working mid-cycle. Motor control board needs to be replaced, actuator needs to be replaced. $500+ Our local appliance store suggested we call the Whirlpool customer relations number and ask for the parts to be sent free of charge. We would pay labor. They gave us the model number, serial number, the diagnostic info. Long story short, customer service told me she didnt know why I was told to contact them. They can not predict the life of a machine. Less than 3 years for this machine. 22 years for my old Kenmore. Our old Kenmore never had a problem, but we thought that we should replace it in 2012 in case something happened with old machine. WISH WE KEPT THE 22 YEAR OLD KENMORE.

I purchased my Cabrio Whirlpool washer five years ago. In the past two months I have had three service calls for repairs. I had water leaking out from underneath the machine which was the result of a failed drum seal. Now I get a ul message (there was one blouse being washed on delicate) and the washer is making a terrible banging sound. I dont think it is spinning. I have not been happy with this washer. My previous washer was 30 years old.

My new fridge is extremely hard to open. The technician that was sent out told me that there is too much suction building up inside the fridge and freezer and that is why it has to be yanked to open. This is not only annoying it means the fridge is constantly being pulled forward out of place. Technicians solution was to deactive the castors under the fridge. At the time he was here I did not realize that I could then no longer move the fridge out of its place to clean. I called Whirlpool and complained and was told that they could do nothing more for me because the fridge is in good working order. I hardly would call this good working order. They also informed me that if I wished to clean under the fridge or the coils at the back it would require a service call to move the fridge and I WOULD BE CHARGED EACH TIME. Needless to say I AM VERY, VERY UNHAPPY WITH THE WHOLE SITUATION.

We bought our Whirlpool washer and dryer set through a PX at Fort Hood, Texas. Took it home, plugged it in and... nothing. Called the service desk, and they sent a repairman right away. He replaced the panel and the water intake fuse (I think? It was a fuse that dealt with the water filling) and then we were off and running. I thought, Great! Now I can wash laundry! After about a couple months, the washer would be so stinking loud in the spin cycle, we would plan outside activities ha ha. Fast forward 2 years, the loud sound continues, but Ive not had any problems. Then, Im washing a load of bed sheets, and just happen to walk past the washer while its spinning... I smelled something HOT and BURNING! Sure enough, it was the washer! I hurried and stopped the spin and unplugged the machine. Opened the door to pull out my sheets, and white smoke comes pouring out of the machine. IT NEARLY STARTED A HOUSE FIRE. I was praising God I smelled the problem. Who knows what would have happened. So I call an appliance shop I trust. They send out a guy who tells me I might as well purchase a new machine because the bearing is bad, and the repair is going to cost $600+. Never again, Whirlpool. Never again. You dont endanger my familys safety in exchange for a quick buck on cheap parts. Ridiculous. And, now that I am reading all these reviews on this website about my washer, I am floored. How is there not a class action lawsuit against this company? Mold and fire-hazards are serious infractions, in my opinion.

I bought the most deluxe and expensive washer and dryer I have ever owned. It is a Whirlpool Cabrio. The clothes come out of the washer dry, and all tangled up. I bought it new from Sears on July 2009. Now only two years old, and the washer sounds like a jet plane. I paid a repairman $90.00 only to be told this is common in this machine. The repair is expensive, and I would be better off buying a new one! I owned a cheap, little GE washer, which cost me $300; ten years, and never had a problem. Now my dream machine turned out to be a piece of crap. I will never buy a Whirlpool again!

I owned a Whirlpool Cabrio washing machine for 3 years (a two person household). The repairman just quoted $700 to repair a faulty center hub seal and bearing. This machine was not inexpensive. I expect more from a quality machine. A telephone call to Whirlpool resulted in two ten minute holds while being shuffled between representatives and each representative tried to sell me an extended warranty for another $289. Whirlpool should take full responsibility for this faulty product and not act like a telephone support center located in Eastern Europe. I am not pleased with this (lack of) resolution and do not plan to purchase another Whirlpool product.

Just bought what I thought was going to be a great dishwasher. It had all the features I wanted. But, I discovered that none of my silverware would fit in the slots provided in the silverware basket. It is a disaster. The slots are so tiny that most of them are unusable. I called Whirlpool thinking that surely there was another basket I could substitute, but no, there isnt. Everyone was very polite, but the end result is that the Ill be handwashing most of our silverware. Unless your silverware has very narrow handles, forget this machine. Obviously designed by someone who has never loaded a dishwasher!

I will never buy a Whirlpool product of any kind. I bought a gas stove and its a piece of **. Won’t even light. Only way to start it is start boil then switch over to bake then it wont light. So please I ask that you make a product thats worth buying.

I paid over $1,000.00 for a washer based upon previous experience with Whirlpool appliances. I am single, over 65, and use this machine infrequently, as compared to when I had children. The only thing Whirlpool is offering is another of their machines at a discounted price. I value principles more than dollars. I refuse to give them another $600+ as a reward for making junk which apparently should have been recalled. The part I need is not available any place Ive found online. And it completely controls the power to the machine. You cannot open the door, you cannot turn it on. I had two service calls to discover this part is not available.

I like the Whirlpool oven ranges because it is easy to operate, easy to clean and like the features and functions. I have had no issues with the stove and I have had it for four years already. So far still working good.

Whirlpool side by side model WR5571CIDM. Unit rattles EVERY time refrigerator is opened or closed + plus every hour or so spontaneously. Rattle seems to come from the water filter area. Whirlpool serviceman says its normal for this model and calls to Whirlpool customer service say just live with it. Hard to believe Whirlpool considers this acceptable performance in a new model.

Always buy an extended warranty if you are going to buy a washing machine. Mine cost $129.00 extra and it is not through Whirlpool. Three control panels and two tub bearings later, the extended warranty insurance carrier gave us our money back to buy another machine. My wife loves the operation of the Cabrio, so we bought a WTW8200YW today, in the false hope that it will work much better. We have an extra washing machine in the garage for the three week period before repairs. The serviceman has to come look to verify the problem, then come back when the part arrives.

Whirlpool has been a trusted name for us for many years. The large tub has cut my wash load in half. Large towels to delicates have never been a problem. My washer is going on 12 yrs old and runs like a champ.

I bought a Whirlpool Cambrio washer/dryer set last year. I hate them. They dont get the clothes clean, let alone wet! I couldnt believe it! I put my grandsons bib in the wash and it came out completely dry with the stuck on food still there. My husbands shirts still smell like the cologne he put on! I asked a Home Depot sales person about this and he says, yeah, we hear that a lot. !!!!!!! Im going back to a washer with an agitator so that I know my clothes are being cleaned. This whole water control business is insane. Whats the point if you have to wash the clothes several times to feel like they are marginally clean? The problem is that the industry has decreased the amount of models that still have an agitator so my selection is very slim. First and LAST time I ever buy Whirlpool.

Whirlpool Accubake Gas stove/oven - Several times now, in the year and a half that Ive owned this appliance, Ive had issues with the knobs easily being turned on. The pilot never lights, and gas leaks horribly. One day I decided to take my daughter to the park and wed ran into the kitchen to grab a few drinks. A few hours later when we came home, I barely got the key in the door when I smelled gas. I left the door wide open and stepped inside the house and saw the not one, but two knobs had somehow been turned on. Im assuming that when my daughter and I grabbed our drinks, one or both of us must have barely bumped the knobs. We had to stand outside and leave the front door open for over an hour to air out the house!Ive found that I literally have to keep the knobs off the stove to prevent the gas from leaking in our home and someone passing out. NEVER in a million years would I have made such a huge purchase (and yes, its a huge purchase for a single mother!) on something thats used on a daily basis if I had known what a danger it could be. I almost forgot to add, that the stove top grill began rusting the first time I washed them off and the oven often does not light and we have to leave the drip pan unscrewed in order to light the pilot.

My son purchased the Whirlpool 2 door w/ icemaker about 3 years ago. Twice weve had a repairman here. Yesterday was the 2nd one. He tried 3 ways to get liquid to go through a round coil I could see at the back. He said the problem was between the two back panels (back of fridge & inside wall) where there was a tubing to release the water from defrost cycle. It appears to be a manufacturing problem. I am very upset! It should be replaced at the very least.

2016 Cabrio Washer - I had an 11 year old Maytag washer that finally gave up so rather than go through the repair I decided to upgrade to a new washer dryer and went with the Whirlpool Cabrio W/D pair. I am shocked at the washers inability to clean even the most basic of stains. I have to pre-treat clothes like never before, have tried every type of wash cycle offered and cant believe the amount of time it takes to clean clothes. Over one hour??? My Maytag may have agitated the heck out of a load but in less than 30 minutes everything was clean. Ive had to re-wash load after load of the most basic everyday stains. I was hoping the larger drum would allow me to cut my laundry time down but that is not the case, and find myself putting a few things in at a time so they get washed. Im stuck with this piece of crap and have only had it for one month... Cant wait for it to start breaking down and dealing with repairs as so many of these comments mention. I miss my Maytag!!!

The Whirlpool range #GY398LXPQ00 is four years old. This is the fourth major problem. Oven overheats and will not function. I set it at 350 and the bottom coil and broiler both came on and overheat quickly. This is the third time with same problem. I am going to have enough invested in repairs to buy another range. I shall never purchase another item made by Whirlpool or any of its affiliates. That leaves me with Samsung or Bosch, I think. The people are very curt and offered no help at all so calling them is extremely useless. This range is definitely a lemon. Too bad, there arent avenues to make them replace it. I am angry, disappointed, and disgusted. Are you listening, Whirlpool? Never again. May your company go down the drain.

Its awful! We paid over $600 for our Whirlpool Gold Series convection/microwave clean release oven (model GMH 6185XVQ1). It worked fine for 12.5 months at which time it started clicking and, after a final zapping sound, would not heat anything at all. I called Customer Service, Oh, so sorry, its past its one year warranty. I was finally transferred to Escalations then to the supervisor of the Escalation specialist. Finally, we negotiated that I would pay for the service call ($129) and they would pay for parts (which were around $300 for a fried magnetron, diode, and something else). That repair was 6 months ago. Today while heating a glass of water in our microwave, I heard the familiar zap and no matter what, the microwave will not heat anything. I called Customer Service again, figuring the newer parts were still under warranty. Wrong. The newer parts were only covered for 90 days. This time, they tried to sell me a service plus package. For only $289, they will re-warranty my microwave for 1 year after they come out and fix it again (cost on me). My other option is to pay $129 again for another service call plus any parts (which Im sure will be about the same as last time. I will never buy Whirlpool again! Buyer beware!

I bought a Whirlpool Dryer after reading an excellent review in Consumer Reports, despite it costing more than I wanted to spend. The first thing I noticed was a thump, thump, thump with every rotation of the drum. Then I realized that it took twice as long to dry my laundry as my 45 yr. old GE dryer, which only needed a belt, but which wasnt available anymore. I was disappointed in the Whirlpools performance, but that was only the beginning. One night when the dryer was less than 3 months old, I was in bed for the night and I heard the familiar thump of the dryer running. I went downstairs and could not stop it as it did not respond to anything on the digital control panel. I finally unplugged it. I called Whirlpool and they sent a new control panel, but I had to pay the service man.Not too long after that, the dryer heated up, but the drum would not turn. The serviceman said that it had come off track and he reset it. Shortly after, the door would not stay closed as the clamp that held it shut had fallen inside when I pushed the door closed. I replaced that. Then the drum continued to come disengaged because it was out-of-round. But, of course, the dryer was out of the 90 day warranty period too and a drum replacement would have cost more than the piece of junk was worth. So, I had it put back on for what I told myself would be the last time. Well, it was the last because the control panel went bonkers again and would go on by itself and only ran on one cycle if I plugged it in and unplugged it when it was done. I finally gave up and bought an inexpensive analog GE dryer which I never had any trouble with and dried the clothes in less time with less noise.

Mind you, Whirlpool products that we have purchased in the past have been satisfactory, but gas hot water heaters, no! About four years ago we purchased a Whirlpool hot water heater that went out in a little over a year. After spending many calls and time, we found out that the HWH was on soft recall. Whirlpool credited our account, but this was to purchase another Whirlpool, which we did. We paid for installation. About 2 years later, it has gone out. Same problem. Lowes says not their problem. Whirlpool says it will pay for the part only. Plumber will cost 150-200 dollars. All the plumbers I have talked to will not repair them, then they are held responsible when it goes out! As a disabled Vet I cannot afford to throw 400-600 dollars away. And, Whirlpool tells me that if they give me an RA number to replace the HWH, it will have to be a Whirlpool from Lowes. Great! Whirlpool quarterly report looks very good. Mine doesnt look as good. What can be done about a poor working product? Or is this too big to fail? Let me know.

Aqualift cleaning does not work. I am old with bad knees and do not need an oven that has to be cleaned manually. This technology is a joke and everyone who bought one should be reimbursed. One reviewer indicated that there should be a class action lawsuit for this situation. I agree!

I purchased the Stainless Steel, side by side with water and ice dispenser, model #WRS325FDAM04 on 11/30/16, paying over $1,600 for the refrigerator. We had trouble from the beginning with the freezer door not closing all the way. When the repairman came out, he said the entire door had to be replaced, as it was warped. Since then, one by one other items are breaking in the freezer and refrigerator. The plastic casings holding the glass shelves have broken on all three shelves in the refrigerator, the wall of the refrigerator and the freezer is cracked in several places, the ice bin has a hole in the bottom, where the device rotating the ice out broke and now when used, ice falls into the freezer, and the bins in the refrigerator have broken as well as some of the door shelves in the refrigerator and freezer.I called Whirlpool before posting a review to provide them an opportunity to at least offer to help in some way. Their response was due to so many pieces missing/damaged they would not be able to help in any way at this time. I purchased a Whirlpool product as I expected I was purchasing a quality product with quality workmanship from a reputable company. I have been sadly disappointed and will no longer support Whirlpool by purchasing any item manufactured by them and will share my experience at every opportunity.

Whirlpool Cabrio Washer model WTW6400SW2, serial CU2372784 type 480: I have had this set for about 4 years now. First, I had to replace the motherboard. And now today, I found out that the center post seal was leaking and caused a lot of damage. I was told that it would cost around $300 plus to get it fixed. I have seen on sites that this washer is a lot of trouble and the makers need to fix these problems. Also, the washer sounds like a jet running. We need the makers of Cabrio to step up and fix these problems or refund us the money that we have paid out for this thing. We, the people who have bought these machines, need a lawyer and to start filing lawsuits against these people.

I have the same issue with cooking time on my Whirlpool wall oven (WFE54OHOES). Bought it in January and have not yet had a single recipe come out cooked. Outside is crisp, inside uncooked, after twice the amount of time it used to take. Its still under warranty. Service came out and told me to bake differently. Thats an answer for you. I am going to pursue this issue with Best Buy where we purchased it.

If I could give no stars I would. I own the Whirlpool Cabrio, which I bought only 2 years ago. Im on my 3rd service call. They replaced my board after only 1 year of owning it and now 2years later its the same error message (F6E2), the board again. Besides this problem the machine is horrible! Every load has to be done on the deep water mode or else your clothes will come out with dry areas. Forget about darks - they come out with lint and soap residue all over them. So for darks you have to use extra rinse cycle but still the clothes come out with lint all over them. Laundry has turned into a nightmare for me. And the clothes arent clean. If I dont spray and scrub any stains, the clothes come out with the stain still on them. Dirty white socks come out dirty, even with bleachI dont use warm water on my clothes because it shrinks them and I dont put all of my clothes in the dryer because it shrinks them. So I am constantly using lint rolls, like crazy on all my darks. And even though the machine is very large I was told to never put a lot of laundry in it because nothing will get clean. So now I have to do more loads of wash. Doing laundry has turned into a job, a horrible job that takes hours. So now I have to use deep water, extra rinse and smaller loads so how is this energy efficient - its NOT, its the opposite of efficient. I am doing more wash and using more water. I use liquid HE detergent like they said. I clean my washer when it lights up to clean it. I dont know what else to do. I just called whirlpool about all of this and my second board being broke within 2 yrs and they dont stand by their products. I have to just keep getting it fixed through my extended warranty company. Thank goodness I bought an extended warranty.I would never ever buy anything whirlpool again! Dont buy this washer if its still available, it is the worst. Even if cabrio isnt available (which I dont see on their site) I still wouldnt buy whirlpool. They should replace my machine with a different one at this point. Not that I want another whirlpool but at least I would have a machine that works. This machine completely stopped working after the error code so I have no machine for 4 days now. I waiting for my extended warranty to get back to me and then I have to make an appointment for the appliance company to come and fix it. This is crazy. All these days and I cant do laundry. This is not acceptable!

The washer (Cabrio WTW7800XWO) was less than 2 years old and we had a motor go out, so we paid a repairman to come out and repair the machine. The total cost was over $300. Now 2 months later, we get another code on the machine and Whirlpool says, We are sorry but there is nothing we can do, but if you would like to pay $219, we can get a repairman out there to check out the machine and repair it. Theyre also giving the machine an additional year warranty. Shortly after that, I noticed the lid was not staying up when I opened to put clothes in it to wash. So since I was wondering what was happening, I looked at the lid and to my surprise, the springs that hold the door up when open are built into the plastic lid cover that has a see-through glass on it. Right where the springs are located, it must be a stress point and the plastic lid has since cracked and is almost about to break off. I am now in the process of ordering another lid and Whirlpool offered to sell me a lid for $226 but I think I shall buy it from someone else as I dont want to put any more money into Whirlpools pockets. We paid over $1000 when we bought this machine. Now it is about 2.5 years old. I hope there is a class action lawsuit on Whirlpool as I will definitely join in if there is. This company needs to go out of business if they continue to sell machines like this that have so many problems especially when they are less than 2.5 years old. Goodbye Whirlpool. You have lost many more customers as I shall be letting everyone I know about all the problems and complaints about this machine.

We have had this water heater for less than 5 years. It was purchased new from Lowe’s. This is the second time we have had to replace the thermocouple and are told that we have to order the part from Whirlpool. Really? What do we do for hot water in the meantime? This is a very disappointing response from Whirlpool and Lowe’s. I will never again purchase anything from either company. We had to buy a new heater today, pay for installation and permits. This is a rip-off by Whirlpool and Lowe’s.

I purchased this machine in April and already, the right leg is rusted and the under seam of machine is rusted. I have throw rug under it and where the leg is, there is rust on the rug. I called service from Whirlpool and 2 servicemen came out. The first one told me I was loading it wrong and the water was splashing over the inside tub to rust the leg and I asked, So why is the seam under the machine rusted? No answer. The second one came out and told me he could not find anything wrong with the machine and doesnt know why it is rusting, but he never gave me a paper to sign off on. He also said that maybe it was rusted when it was delivered. Not!!! Then I call P.C. Richard in Watchung, NJ where I bought the machine at and told them about the problem. They sent a serviceman out and he said that the bleach condensation is causing the rust, its known fact that this machine has this problem. He said that the water does not run through the dispenser but there is a model that does. I want a credit on this machine and get the upgraded one. It states on the machine that I can use bleach but it doesnt say it will cause rusting. I want you to tell me how a 9-month-old machine is rusted on one leg and the seam underneath is also rusted!!!! I had a machine for 10 years and it wasnt rusted. I am very unhappy with this product and with the customer service of Whirlpool. This is my first Whirlpool washer and I would not recommend this washer to anyone. I paid $600.00 for this washer and it should not be rusting.

I bought this machine in September of 2014. Six months later I HATE IT!! It does NOT get the clothes clean and dont even try to bleach white towels or socks, it doesnt pump the correct amount of hot water and things come out just as dirty as when they went in. It tangles everything together and frequently stops working because it unbalances the load with its lack of water. Ive always been proud of how my familys laundry looked and now Im just embarrassed. Im considering donating this to a human society for dog towels. Stay away from this washer, its horrible. Im going to the laundromat and shopping for a new machine ASAP!

The first day I set foot in IKEA changed my life, innovative and sensible and affordable. Some years later I had the opportunity to remodel a kitchen and I immediately thought of IKEA. I used their online planner, researched the appliances and knew that they were made by Whirlpool and that they offered a kitchen package discount if I bought 3 or more appliances with all the cabinetry. So I hurriedly designed the entire kitchen from top to bottom with IKEA.Included in the design was my center piece, my 5 burner Praktfull Pro Gas/Convection oven range with stainless steel backsplash and top of the line hood fan, basically a thing of beauty! I loved it and I visited the store several times to look at it. I finally bought everything, and installed it. Absolutely the most beautiful kitchen in the world.We have a historic building and were on several historic tours, interviewed for the newspaper, our kitchen was the highlight of the tour. My gas range drew oooos and awwws. The range is an exceptional appliance, beautiful and amazingly efficient, easy to clean…I was in love. Then one day it happened, the love affair was quickly over, devastatingly over. The door fell off the oven and the hinge broke! Yes you heard me right, it fell off, but that is not the worst part. It appears that not only are there no parts to fix it… there IS no fix for it, period. The door fell off because it had been glued on!!! Yes glued on. Whirlpool and IKEA had actually manufactured an appliance that failed in less than 4 years of use and no apparent intention to ever provide service or parts for it. This is criminal and they should be fined for their neglect of the customer, their calculated malfeasance and fraud to the customer.So my beautiful kitchen has a big black angry cavity in it and now I must try to find a new range that will fit in the opening left by this piece of junk and also pay probably over $2,000 to $4,000 for it. Most of all I am heart broken, mad and distrustful of anything IKEA in the future. Oh and by the way, my entire house is IKEA, my living room, my patio, my bedroom (s), my library, my office! Ive spent thousands and thousands of dollars at IKEA. No more! THE FINAL INSULT: Ironically…. my kitchen was featured on the IKEA website!!!

It has performed perfectly for the past eight or nine years. Only problem has been little plastic parts broke that held one big drawer that we may have overloaded. Door shelf plastic part holding it on... broke also.

5 years and 11 months ago I bought a 50 gallon gas, Whirlpool hot water heater with a 6-year warranty from Lowes. The 2007 water heaters were on sale, so I paid $329 for it. Within 6 months, I replaced the gas valve, and a few months after that, the thermo-couple went out and I replace that. Each time I called Whirlpool and got return authorization numbers for the parts, I still ended up paying for the parts plus labor. A year after that, the igniter went out and I had that replaced. Last year (the day before Thanksgiving), the thermo-couple went out again and I had to have that replaced - and it cost me for the part plus the labor - even though I had a return authorization number. I also replaced the water line connections/hoses to the water heater at that time. The customer service rep for Whirlpool told me at that time if I had another problem with the water heater, they would replace it for free - and the warranty was good until Dec 31, 2013 (this year). NOTE: Every plumber that has come out to fix the water heater and replace the parts stated that they see a myriad of problems with Whirlpool water heaters. They said the parts like the thermo-couples, igniters, gas valves, etc are poorly built and they replace them all the time. On Christmas Eve 2013 (two days ago), the water heater started leaking from the top by the valves - and so much pressure had built up in the heater the new water hose connections burst, spewing water all over the heater closet. I called Whirlpool the day after Christmas (today). At first, they told me they would not replace the heater as it was not in warranty and then I told them what I was told by the service rep last year. She finally agreed that my heater is indeed under warranty and gave me a replacement authorization number but she told me my warranty did not cover labor. I called Lowes. At first, they told me I would have to remove the old hot water heater myself and bring it back to the store in order to get my replacement. I am a 59 year old woman and I take care of my brother, a disable veteran. Although I am in good shape and healthy, I dont have anyone to help me get the gas and water disconnected and help me lift it into my Suburban. The man at Lowes agreed to bring out the the replacement heater and pick up the old one at no charge, but I will still have to pay $299 plus the cost of new hoses to have it installed. By the time the replacement one is installed, I will have paid a little over $1200 for a $329 water heater. I could have installed a tankless one for that, but I cannot see spending that kind of money right after Christmas. If I have one issue with this replacement, I will install a tankless water heater - and it will not be made by Whirlpool or any of its affiliates. My recommendation would be to steer clear of Whirlpool and their products.

Had the washer 3 years. After 1st year had to replace motherboard and lid locking mechanism. Beginning of year 3 the basket came loose, the machine wouldnt spin the water out of the clothes completely and then it quit cycling into the next cycle, ie, the tub filled up with water for the wash cycle but then would not begin agitating. The water sat in the tub until the wash cycle was done and then would drain but would not spin. Each cycle had to be manually started by pressing the pause button, raising the washer lid, and then pressing the pause button again. I called a repair person who ran a diagnostic on the machine and said it needed a new pump, new motherboard again and something else to make it spin properly. Sorry I dont remember what the something is. The estimate to repair was approximately $759 so I am now shopping for a new machine thats not a Whirlpool.

Whirlpool Water Heater FG1F4040S3NOV - I had this water heater installed in 2005 by a professional plumber and every year since like clockwork, I have to replace the gas control valve/thermostat. Last year, Sears came and did the work and made their arrangements to have the part replaced. This year 2012, March 9 my gas control valve went again. The unit is not even a year old and broke again. Unfortunately, the six-year warranty is up on the hot water tank. I called Whirlpool two times. The first time, the guy told me that the warranty was up and hung up on me! The second time, the guy would not honor the replacing of a part that is not even a year old yet. The money I spent over the six years making repair on it, I could have bought a new one. This company is nothing but a bunch of **. Is there anything that I can do? I have paid to replace this five years in a row.

Purchased the new dishwasher in 2009 through the builder of our home. I quit working completely like there was no power to it. We replaced the fuse to it and then it worked, but kept pausing during the cycle. Sometimes it will completely go off and then when the control panel comes back on, it sits paused until you push the button. We replaced the computer with a new one and it works even worse. It shuts down more often and still requires a restart. So frustrating! Appliances should last longer than a couple of years.

We purchased the washer on April 25, 2015. It has been an absolute nightmare. Reached out to Sears within a week of delivery because the wash cycle was way over an hour. Is a terrible machine, my clothes come out dirty, is damaging my clothes and Sears says I cannot return it because according to them I havent had it fixed enough times. It washes for over an hour at times. It takes water and releases water and goes to wash again but is not cleaning the clothes. As a homeowner we pay water, and electricity and perhaps I wouldnt be so upset if my clothes would come out clean. At first the tech told me to change from the HE detergent purchased and recommended at Sears to liquid detergent and then since I still get stains on our clothes he advised me to use less than the recommended amount. I also purchased the kit to wash the machine. This is a real lemon and nobody wants to admit it. I have purchased Whirpool washer before but if they dont admit that this is poorly made and give me a voucher to buy another machine I will never ever in my life buy Whirlpool or Sears for that matter. The machine is just a year old and I cannot use it because it damages my clothes and worst, is not cleaning my clothes. It disgust me to wear dirty clothes or to have my family wear them. So now I have another appointment and at this point I no longer use the machine. I will tell everyone that is willing to hear my experience. Do not purchase this washer, is not good and is only trouble. You are not going to be able to get it exchanged or fixed. I think that a full year would have been enough time for Sears to determine this is a lemon and do the right thing by the customer. I now go to the laundromat because I have a machine that damages my clothes. I am also out of money to purchase a new one and the wearing dirty clothes disgust me.

I thought with the big tub I would be able to wash my king size bedding and other large things. Theres barely enough water to wash a small regular wash. Since it has no water it does not clean my clothes. Why the big tub if you cant use but one fourth of it?

I purchased a brand new 2019 Whirlpool side by side refrigerator in October of 2019 for my new house. Yes, that was 2.5 years ago. HOWEVER, I live alone and hardly ever use the ice dispenser. Maybe, it was used 20 times in 2 years. The ice dispenser just stopped working and today I notice the refrigerator is not even making ice! What a piece of garbage!

I purchased a small dorm size fridge from Target after our electric went off and was gonna be off for a while and we purchased this to run with a generator and its 110 power also but this is a super little fridge and I would definitely would buy again.

We purchased a Whirlpool Cabrio washing machine in September 2006, and have had nothing, but problems. I constantly have to get online to check error codes. Several months ago, the washer just stopped working. We called Whirlpool technical support. They said wed have to pay for a repair. After several calls to Whirlpool for help, I found online references to a recall for the same problem. Whirlpool NEVER mentioned that the washer was recalled for the very same problem. I called them back with the recall information, and they politely sent someone out to rebuild the washer. Less than a year later it is no longer working, again. I went online first this time, to check for further recalls and complaints about the current problem (faulty control panel). I found many complaints about the same problem--even a reference to a class action law suit. Whirlpool said they were unaware of the problem, didnt have many complaints, and are unwilling to help. I asked for a supervisor, Benjamin, and he said there was NO means by which I could further escalate my complaint.

We have had this dishwasher since 1983 and we still run it on an average of 6 days a week. Features are the fact that it has given all of our dishes, our silverware, our pots and pans sparkling clean looks for all those years. It fits nicely into the kitchen space which was designed for a dishwasher. It never needed a repair. After all those years, this machine still looks fine. After all those years I really doubt if it still has a warranty and it never needed service.

The first washing machine I bought was a Cabrio. Started having problems right off. After the repair people had been there several times we finally got Whirlpool to replace the machine. We got another washing machine. We bought two warranties because it kept tearing up. Repair people said this time it would take $1500 to fix it so of course AIG said, We will not pay this much. So I have a washing machine I have spent $1600 on and it leaves, greasy spots all over my clothes. So fed up with Whirlpools trash!!

I have had a Whirlpool washer for less than 1 year and have had it serviced over 7 times with drain problems - code A10 being displayed. Have not been able to resolve the problem with neither the dealer nor the manufacturer. What a lemon!

We have never had problems with our old Kenmore appliances. Since we have had the Whirlpool complete set we have had problems with both the Refrigerator and now the Stove. The fridge had already been re-engineered by the time the repair man got here but the fix didnt work. We had a 50 degree refrigerator for over a month. Now the stove wont keep a constant temperature so we wait for the service man once again. They look beautiful but they are the worst we have owned over our 36 years. They obviously have engineering issues looking at all the other reviews. I dont see us purchasing another Whirlpool appliance in the future.

Plate in front of the door that is at the back of the water dispenser bowed out. Company will not fix even if the refrigerator is not a year old yet. Said it only covers things like this for thirty days. Do not buy a refrigerator that Whirlpool will not stand behind.

Purchased fridge in November. Broke 1st time in May. Design defect that Whirlpool knew about. Repair was to move a part called a thermistor farther away from where ice was building up. Broke again in July. Called for service July 28th. Its now Aug 23rd. Was just told by repair service parts might be in Sept 15th. Had to throw food away twice, missed work 5 times for service calls. Repair company & Whirlpool have done nothing but lie to me. All Whirlpool offered was a $150.00 inconvenience fee. Not even close to what Ive lost. Never even received that & now they wont return calls. Talked to 5 different people at Whirlpool, including supervisors. All said they would call me back, but didnt. Keep leaving messages & they just ignore & dont call back. Still no fridge. Want my money back or a new fridge at this point.

Quiet running, does a great job cleaning and drying the dishes, experienced some cloudiness on the glassware but found that if I position them in the middle of the upper rack that issue was solved.

It was obviously designed by someone who has never had to clean a refrigerator. There are grooves in the door gaskets seemingly making their sole purpose to collect crumbs and mold with no obvious way to keep them clean (No, Q-tips dont do it). A layer of ice forms below the basket in the freezer (bottom freezer) which, when it melts, soaks the kitchen floor. Ice must be chipped out at least every two weeks to avoid flooding.