Aqualift technology does not work!! This is absolutely the worst product I have purchased from Whirlpool. The aqualift technology DOES not clean the oven, even if you clean the oven after EACH time you use it! I am not able to bend over and spend the afternoon in the oven. And even when I do, I cannot get this oven clean!!! Please DO NOT buy a Whirlpool stove with an aqualift technology oven cleaning process!!! You WILL be sorry!!!

Never ever go for Whirlpool. It has the worst customer service. We brought an oven but accidentally we broke the inner oven plate. We called up the customer care person on 18002081800 and tried asking him the dimensions of the plate pr at least how we could reorder it. He never listened to us. He just got our details. Said that technician will come at 11am tomorrow and disconnected the call when we were trying to explain what our query is all about. Is that all the respect a customer deserves!? Is that how whirlpool trains their service people!? He doesnt even have the basic courtesy to listen to the customer, I wonder how was he even recruited as a customer care person. If you want at least your basic respect, please DONT BUY WHIRLPOOL.

I purchased a new Whirlpool stainless steel smooth top range model #WEE745H0FS and it was installed the day before Thanksgiving, 11/22/17. The oven door handle was broken on inside by installers. I called Whirlpool warranty on 11/24/17 and requested a repair. A repairman came the following week two days late. He said he needed to order a part. After calling the “Whirlpool approved” repair shop multiple times over the next two weeks, I was told the part was backordered. Finally, yesterday, 12/13/17 the repairman showed up an hour later than appt. time. He took the oven door apart again and the new part didn’t fit my oven door. He had carelessly ordered the wrong part. I was told he’d put a rush on the correct part and that it would be here 12/18/17. I will never buy another appliance from Kelley Appliance in Augusta GA nor another Whirlpool product. I have had to use duct tape on my brand NEW oven just to use the oven so it doesn’t fall apart when opening.

Whirlpool washing machine #WTW58ESVW1 - I bought this thinking Whirlpool was a good brand name. I was totally wrong. My machine is two years old and the auto sensor switch has quit working 6 times. One time it only did 6 loads of laundry. Another it only worked for 6 weeks. That time I replaced the switch myself to save money on a repairman. Ironically the switch is still under warranty but they will not replace it unless a serviceman comes to confirm that the switch is dead again. This is because 2 have already been returned to them. Obviously, there is a problem with the switch. The company will do nothing. They used the excuse that I did not purchase an extended warranty. This is merely an excuse. Do not purchase any Whirlpool products. You will be wasting your money and time having to end up going to go out to do laundry.

Because the Korean appliances are a problem for repairmen, were stuck with a Whirlpool choice. Seems to be a good fridge. Noisier than my Kenmore (Korean). I got instructions from repairman on opening right door first and closing it last. Otherwise rubber wears out too soon. If I put anything on left door opposite ice maker, it freezes, making that shelf useless! We had ordered a Kitchenaid but the installers damaged it.

While the washer is great, the reliability of the dryer is lacking. The timer has broken 3 times on ours in 3 years. Each time the cost of the switch is $75.00. Too much plastic on the shaft. If the plastic was removed, and the shaft was metal, it would be a definite improvement.

Bought a new Cabrio, worked ok but in less than 2 yrs the bearing is bad. It will cost almost as much to repair as a new washer. Will never buy a Whirlpool product again. Would give negative rate!

I purchased Whirlpool french door refrigerator wrf535smbm00 at the beginning of this year and it has really made my house an unpleasant place to be. My main complaint is that it is very, very loud, and seems to vibrate through the whole house. It runs most of the time at a level of 60 dB, which might be considered a low noise level for a mechanical appliance that runs occasionally like a dishwasher, but is quite loud for an appliance that, according to their own specs, runs at least 40% of the time. Nobody wants to notice their refrigerator. They just want it to work.Which brings me to my second complaint, the temperature control is all over the place, generally ranging from 25-50 F. I find it difficult to believe that the government, which always seems overly concerned about the temperature of restaurant food, or the pasteurization of cheeses doesnt care that an appliance nearly every American household has doesnt necessarily do its job, and isnt required to display internal temperature. The old-fashioned set this dial to an arbitrary number and hope its cool enough is not charming.Finally, though the finish is listed as stainless steel, mine started sporting tiny rust spots after only three months. Whirlpool states that Cosmetic issues are covered by the manufacturers warranty for the first 30 days of ownership only. After the first 30 days any repairs for cosmetic issues are the consumers responsibility. It seems as though they know theyve used a low grade of stainless steel.

Our slide in range had a burned out element. After waiting a week for the part the range still did not heat. The real problem was the control panel at a cost of $300 plus labor. We were so discussed with the problem we purchased a different brand range. Who should be purchasing a new range after 18 months???? Cost of service call twice, part cost of element, and new range all total another $600.00. Do not purchase this product!!!

We purchased a Whirlpool Cabrio Washer and Dryer in 2007. The washer sounded like it was going to take off and started leaking water. Two repair techs later, we found out it was the center bearing. They actually laughed and said they saw it all the time. It could be replaced (you need to replace the whole drum) for $300-$500, but I was told it would never be the same. I spoke with Whirlpool numerous times and they said they would do nothing, and I should have purchased the extended warranty. All I ask is for a company to stand behind their product. Im very disappointed.

Since purchasing original refrigerator 2 years ago I have multiple problems. Freezer was icing up to the point where drawers could not be opened, after numerous service calls, door was replaced which did not resolve problem. Refrigerator was replaced on warranty. Soon after light control circuit board had to be replaced. Next light control had to be recalibrated. Now, with the unit being approx. 1 yr old, rust spots are appearing on freezer door. Whirlpool rep advised this problem is not covered on warranty and would not provide any information as to what company contacts could be used to pursue the issue. Very upset and disappointed with product and customer service.

As long as Whirlpool continues to use JB Hunt for delivery and installation service of their products, I would stay away from ordering. JB Hunt visited my home 3 times, and each time left with the dishwasher as they arrived without the appropriate tools to perform a basic installation. Whirlpool also sent 2 damaged dishwashers that could not be installed. Buyer beware.

Purchased this washer 5 months ago. Have had service 3 times as dark clothes come out with white residue. I have done everything possible to correct the problem. They recommended from cleaning the machine, using less detergent, minimizing the load, using extra rinse, deep water and still the clothes come out with the residue. And it takes way too long to wash a batch of clothes. This is a known problem with this model. Repair company recommended a replacement and Whirlpool insists that it is a usage problem. One thing they said Could be water is too cold, I live in Florida there is no cold water! Whirlpool refuses to replace it. DONT BUY IT!!!

The plastic frames for the glass shelves are cracking at the corners and the only option Whirlpool has given me is to replace the shelves at about $150 each. Needless to say, the cracks started just after the 1-year warranty expired. If only one shelf was cracking, it could be my fault; but since all are cracking (some on the front, some on the back and some in multiple places), I believe this is a design flaw and should be covered by the manufacturer. When I call, I can only get through to someone to schedule maintenance or order parts. What can I do?

The dishwasher is noisy and the latch which holds the soap, at times sticks. When we think it is done and ready to unload we need to run it again because the latch that holds the soap DID NOT open. Not good.

The oven steam cleans the oven but it only cleans the bottom, not the sides, back or door. They dont recommend oven cleaner so how do you clean it? My oven is a year old and looks like its never been cleaned. You would be better off with non cleaning oven and using oven cleaner. It would be less work. Horrible stove.

I just contacted Whirlpool Co. by online chat concerning the workmanship of their microwave that is less than two years old. The interior top has begun to bubble and peel as well as rusting. This is the 2nd Whirlpool microwave where I am experiencing bubble and peeling paint as well as rusting. Whirlpool informed that the manufactory was 1 year warranty and to contact a technician at my expense. There is a real health issue here and I hope consumer complaints about this company is being monitored by someone who can help all of those with concerns.

I bought a new Whirlpool gas range a few years ago. I am now trying to purchase my 3rd control panel at a cost of $281.00. The oven will not bake or broil. The oven now a provides storage area until we can purchase a new range, which will not be a Whirlpool or any brand associated with Whirlpool. Very Dissatisfied.

I bought a Whirlpool washer and dryer a little over a year now and the washer is not filling enough water for the cycle to wash properly. I have to fill the washer myself and this only started a couple of months ago. This happens even when I have a heavy supply of water.

Sturdy, durable, and flawless operation, from the 5 multi style smooth top elements to the self cleaning convection oven with the secluded bottom element. It is a sleek clean looking appliance, and its the best weve ever owned. To one that says they dont make them like they used to, I say thank God!

We bought a Whirlpool Gold French Door refrigerator in 2010. Just when the warranty period passed, the refrigerator started leaking water from the bottom floor. Initially, it only leaked about once per month. But as time passed, the refrigerator started leaking more often, and now its leaking every 2-3 days. I saw many people complaining on the same problem and some of them even submitted since 2006. I dont know why Whirlpool doesnt resolve this issue in many years.

Whirlpool Cabrio Washer WTW7340XW sounds like a small jet during spin cycle. The Whirlpool Cabrio Washers have a very well known and well documented problem with the tub bearings failing. Many many disgruntled owners have posted their complaints online, and there are many videos showing the issue on youtube. This issue is so prevalent that the manufacturer has created a tub bearing failure repair kit for $350. The repair is so expensive and labor intensive that many of the certified Whirlpool repair shops no longer work on the Cabrio washer stating that a better washer can be purchased for the cost of this repair.That said, the manufacturers customer service group denies that the Cabrio tub bearing failures is a common problem and are quick to state that Whirlpool holds no liability for this problem. Ramping the complaint up to a customer service supervisor is met with the same canned response. Regardless of the thousands of complaints Whirlpool is claiming that it is normal wear and tear for the tub bearings to fail. The manufacturer should recall the units for this manufacturing defect in the Cabrio design.

We purchased a Whirlpool Accubake Drop-in Stove (Model # RS675PXG015) on 10/21/2006 from Lowes Companies, which cost $1,100.00. In 11/2012, we had an error message E1-F2, and we tried everything to get it to clear - all suggestions given by electrical repairman who does repair for Lowes Cos. The stove is porcelain, which also has problems of staining that cant be cleaned. We were told the repair would cost $200 for the panel, and if that doesnt work, another $400 for the other panel. In reviewing other complaints for this Whirlpool stove, there are enough complaints to recall this item or at least give deep cuts for the parts to repair this stove. We have purchased other Whirlpool items, and this one is not well made and too costly to repair. It should last at least 15 years or more. Cant Whirlpool do something about this obvious problem?

I purchased a Whirlpool gas hot water heater in July 2012 and have had to replace the control/pilot light mechanism every 6 months since then. Whirlpools customer service is the worst service in the world. They are rude. I have followed their instructions every time and have been accused of being uncooperative. I paid $350 to $400 for my heater and just spent $200.00 to have a plumber put apple cider vinegar in my tank.I was told by Whirlpool that the calcium sediment was causing the problem... I drained this tank twice and there was no sediment in the tank. This is evidently a common error for Whirlpool tanks. I will never purchase any Whirlpool product again and will tell others that their products are crap. The worst part was the inconsiderate customer service. I dont know who trains them, but they need to fire the entire bunch. Shame on you Whirlpool!

The dishwasher performs well but it is a little loud. The salesperson said that if I had purchased the model with a stainless steel tub, it would not run as loud.

After 5 service calls for cooling problem, under extended warranty, refrigerator was replaced. Had purchased 3 water filters directly from Whirlpool before problem. Could not use these filters in replacement model. In spite of that fact & filters in unopened factory package, Whirlpool would not refund the $100 purchase price because I DID NOT RETURN THEM WITHIN 90 DAYS OF PURCHASE, even though I wrote to their US president. Really unfair treatment & they could care less that I had to replace a defective product.

I have purchased many Whirlpool ranges for my apartment buildings that I own and operate. They never give me a problem with operation or length of service. I only have to replace them when a tenant does something dastardly to them. My husband and I remodeled our kitchen and we purchased one for our kitchen too!

I had whirlpool microwave model # WMH32517AS-2 that came with my new home in March of 2013. In September of 2013, we noticed there were times that the microwave failed to warm the food or liquids (coffee) sometimes at all. Then we figured out that we could hear the noise it makes when it actually warms the food. So after a repair man came out and saw the issue of not warming up, he replaced many parts but within a day we experienced the same issue. Whirlpool had a different repair man come out and replace additional parts hoping it would fix the issue but unfortunately, it did not. Whirlpool said they would send another microwave to us in January of 2014 but now its April 2014 and nothing sent and I have a broken microwave in my house. Due to the length of time it has been, I had to submit this. We have also called customer service on 5 occasions (who have these call documented) and the person that was supposedly helping us and assigned to our case 7 times with no response. We have attempted to talk to a supervisor but were told that I could not, which is unusual. Its just frustrating that this is happening.

Purchased this machine in Jan 2012. From the start, dark clothes came out with white streaks on them. Thought I was doing something wrong - kept using machine. Then started noticing my whites coming out looking very dingy, light tan stains on them. Called Whirlpool and was told to use Affresh tablets to CLEAN my washer - why should you have to clean a washing machine?Several weeks ago noticed machine getting very loud during spin cycles - and I mean loud! Sounds like a jet engine taking off in my basement. Called repairman - he listened to my machine and said noise is the bearings, seal not fitting properly around bearings and the grease for bearings is slowly leaking out into my wash cycles. Explains the dingy whites and spots on darks. Said he just worked on a Cabrio with same issue - had to rebuild seal and bearings - about a $450 job. After reading all these reviews, decided not to attempt to fix this machine. Going to scrap it and start over. $900 for 3 yrs of an inadequate washing machine!! Whirlpool should be made accountable for this inadequate product to all of us consumers who threw away hard-earned money. Reading up on the Speed Queen agitator model. Lots of good reviews. Think I will go back to the old tried and true way of washing clothes.

We purchased a Whirlpool water heater at Lowes for $1100.00. Four years later it isnt working. There are no parts to fix it available at any store in Dallas, TX. We had to call the company. They made us pay the overnight shipping fee for the part. Then the part didnt show up. When we called to find out why isnt the part at my house, they said they found out FedEx doesnt deliver on Saturdays. No one ever called to notify us of this, instead the response was that they would use it as a coaching lesson for not notify the customer. We have now been without hot water in the middle of winter for 5 days. We have no idea when the part will arrive and if it will even fix my defective water heater. We will never buy another Whirlpool product and I strongly encourage anyone who reads this to not buy Whirlpool. They dont stand by their product and have horrible customer service.

I was under the impression Whirlpool washers were good. Mine always goes off balance and quits. I carefully redistribute the load several times to get it to finish (start over). Sometimes it works fine from the get-go, but not often enough. It is now 2 years old and if I were wealthy, Id shove it to the curb. There is little to like with an appliance that often must be adjusted and re-started. I will try Samsung next. It seems that American brands are not reliable. I have no special needs and will consider reliability above all. The name Whirlpool would be a deal breaker for me. I cannot abide my Whirlpool washing machine as it is more of an aggravation than something useful. Stay away from Whirlpool washing machines. They (at least mine) require the load to be balanced to a microgram. Appliances should just work and not require fiddling with.

My Whirlpool washer would start up but would not add any water. It sat there doing absolutely nothing. Then it showed a code on the screen. It said to disconnect the power for 1 minute and plug it back in, which I did. I repeated that process several times. Still nothing. It also said to call Whirlpool, which I did. They wanted the Model # WFW97HEXLO and Serial #, I gave it to the gal on the phone at Whirlpool. I was told it would be a week before they could get someone out there to take a look at it. Really!! I work 80 hours a week and live in the country. I dont have a week. When I asked where the service man was coming from, he was coming from another town. I asked if there was someone closer. She gave me another appliance stores phone number. They showed up 2 business days later, looked at my washer, verified the code along with the Model and Serial #s, telling me it was the control panel. I gave that information to them on a Friday, they showed up on a Tuesday. They knew what that code was and what it meant for that make and model washer, but there just had to be a service call in there. The part was ordered on that Tuesday... here it is the following Saturday and the part still isnt here. I do not understand what takes Whirlpool so long to ship the part. Do they not care that in this hustle bustle life we live in, we dont have time to wait for a part that may or may not show up. Ship it overnight. That is an option. Making the parts accessible to the service people in a timely manner would make great customer-service. Better yet, how about going back to the old-style washers. This high-efficiency non-sense is highly expensive.

Bought a Whirlpool refrigerator and now it is dead after only 3 years - the gas is gone. The Dealer at Budget Appliance Surrey told us it was not a good fridge to begin with (but sold it to us for $900.00) and that Whirlpool had made a lot of fridges cheaply to begin with... So it was not their (Budgets) fault. When I contacted Whirlpool they were really too big to listen to my complaint and even though I had the receipt, they did not care to hear my complaint either. Never buy a Whirlpool fridge.

Bought this model from Bad Boy in 2006 and just after the warranty ended the problems began. We kept getting the F1 error code so with a little internet research we found it was a known problem with Whirlpool. I contacted them and was told they knew nothing about this issue being nationwide, however I emailed them copies of the complaints and responses. They sent out a technician who had to replace the motherboard free of charge. Next issue was a loud noise coming from washer sounding like a jet plane taking off. Hubby ripped machine apart to find the bearings blown apart and in tiny pieces. We ordered new ones and also found that when the new ones arrived they came with a tube of grease and a sealer to use so water would not get in later and cause more problems. Funny there was no sealer on the original bearings.Next the lid lock finally failed, ordered a new one but did NOT install it back into the machine, now it sits beside the machine. In case it fails again we will have total access to the laundry this time. Finally the UL error code keeps coming up. I refuse to put any more money into this machine again so I am allowing hubby to fix it if he chooses, whichever way he wants as long as no money is involved. So right now we have bungee cords holding the suspension rods tight to help with the uneven load code coming up all the time. Personal thoughts - DO NOT BUY WHIRLPOOL washer/dryers. They are crap and the company just does not care and they try to lie their way out of repairs if people have not done their homework.

Started researching online about a week ago because my dryer was making an awful noise. Found out that the new idler pulley system the company used in my Whirlpool cabrio washer & dryer model (WED5500XW0) was so ineffective that they have since started replacing it with the old part #691366 they used to use. Also I am having a problem with my washer not spinning all of the water out of the clothes. Found out that this is a common problem with this model (WTW5500XW0).Had a certified repairman out to replace the dryer idler pulley system. He also calibrated the washer to see if that may help (it did not). The repairman said that some of the Whirlpool washers had been recalled and he had actually replaced some control panels and that seemed to work. He suggested that I contact Whirlpool. So I contacted Whirlpool, thinking that they obviously knew that there have been many problems with these machines (idler pulley part being discontinued & and recall on SOME models), and thought they would be more than willing to rectify this problem. Well think again! The two young ladies that I spoke with sounded like robots, Unfortunately, you are not within your 1 year manufacturers warranty so there would be nothing we could do at this time. Although I must tell you, the second young lady I spoke with did offer to sell me a new washer at a deep discounted price of $386 (which is only $86 more than fixing the washer). I think everyone who has a problem should contact Whirlpool and express this dissatisfaction. And if you are shopping for a washer and dryer, stay away from Whirlpool because their customer service is disheartening.

I purchased it in 2011 for $1100 Canadian. Smooth glass top and true convection. The controls were easy to use, and understand. What bothered me was that it stopped working just after the warranty ran out. I did my research, and found that the newer ranges that have the controls on top at the back have issues with the motherboard overheating, and causing this problem. I did speak to Whirlpool customer service, and managed to convince them to supply the replacement part at no cost. I paid my local dealer to install it. This repair lasted for just over 1 year. Same problem again.This time I could not convince Whirlpool to supply the part. FYI The part in question is the controller. Essentially a motherboard. All the controls are operated through this small computer. It is the only replacement part that costs over $100. Last I checked it was around $450 Canadian. The reason for the fault is overheating. According to the tech that fixed it the first time, it is the most common problem with this style of range. I find this concerning considering the only thing a range does is create heat!Keep in mind that you are virtually held over a barrel. There are only two companies that market their products under multiple names adding up to over 80% of the appliances on the market. They battle for that market by offering more bells and whistles, and less quality. The Range I replaced four years ago was 20 years old. I just replaced my Whirlpool 3 months ago. I went outside of the 80%, and bought a Samsung. Im rolling the dice, and went with induction top. My theory is it will produce less heat because it just heats the pot, not the stove top.Low quality drives me nuts. I want fewer bells and whistles, and more long lasting reliability. I should be able to go my lifetime and only buy two or three ranges. We really like the induction top. It works fast, and doesnt produce too much excess heat. Dual zone oven is a good idea. We werent looking for it, but there was a deal on. The dual zone induction range was only $50 more than the regular one beside it. Now my wife uses it all the time. She will have cookies in one zone, and a casserole for supper in the other. True convection is the other must have. It does a great job cooking everything evenly.

My wife and I purchased the Whirlpool French Door Bottom Mount Refrigerator in April 2013. Thank God we purchased the extended warranty. In June 2014 the ice maker quit working and delivering water. We have had the service contractor that WHIRLPOOL has qualified for all repairs. They have set up FIVE appointments to resolve the issue, all of which I had to leave work to meet because they do not provide any scheduled service outside the hours of 8am to 4pm. The first time they came the service man told me that WHIRLPOOL RECOGNIZES THERE IS A DESIGN FLAW BECAUSE THESE ARE NOTORIOUS FOR FREEZING UP AND NOT WORKING. I asked the repair man if there has been a recall because of this, he said no because WHIRLPOOL WILL JUST REPAIR THE ONES PEOPLE COMPLAIN ABOUT! I called Whirlpool headquarters today. The advisor said he will register my complaint. I asked, Is that it? What does that mean? He said, I cant tell you what happens after I register the complaint. I WILL NEVER PURCHASE ANOTHER WHIRLPOOL PRODUCT. I hope this may help someone NOT make the same mistake. If you need to talk to someone in upper level management to discuss your issue, forget it...they want the position but no accountability.

I have a small condo and this dryer fit into the appliance closet with a few inches around it. Every home needs a laundry system. I bought the washer and dryer in this model. Whirlpool is great!

Model #wfw70hebw Duet washer. Lasted 18 months, replaced one sensor and then find out computer board is toast. Seems this was an issue as I was told there is a CORE deposit on the old board so it can be repaired and resold. WTF? New board (repaired) is almost $300. That is a bunch of bull.

Whirlpool Gas Water heater purchased from Lowes in 2012. Have replaced two thermal couples and three gas control valves. Will not stay lit! Problems began within six months of purchase. Third gas control valve quit functioning today and Im on my way to Home Depot to purchase a Rheem...Im done with Whirlpool!

I purchased my first Whirlpool washer in 1959 and have been true to the brand since. This was a big mistake when I bought the WTW4950XW0. At first I thought it was the learning curve on my part with the new technology. The very first wash load was dry on the top layer....never got wet. Then there was the blinking red light .....you could never leave the room and expect it to continue to do anything. One solution I found was to unplug the washer....wait 30 seconds and plug in and follow with lifting the lid and then close the lid followed by holding the start button down for several seconds. This worked sometimes.Very noisy....sounds like a plane taking off after the gears shift and lots of clicking and a long pause to have the water to enter the washer. I have run out of patience. I am going to buy another washer today. I called Whirlpool twice for advice and they offered none but a high dollar repair and no compensation for the lemon I had in my home. Enough is enough.

I thought this was a nice high end washer and dryer set but it does not clean even wet mud. The mud just smears onto other parts of the clothes. My dog had an accident on her blanket so I threw only her blanket in on deep water setting, this is a large capacity washer and not a large blanket, the accident was still on her blanket when the cycle was finished. I had to rewash for another long cycle. Maybe its because it doesnt have an agitator. I was worried about this when I bought it and I will never by one again.

It took several delivery attempts to get a refrigerator without cosmetic flaw and it only lasted four years before Freon leak in evaporative system occurred. It would have cost more to repair than replace. Needless to say, I replaced it with another brand.

The new? improved model with NO center agitator is the worst - clothes tangle badly and the load becomes very unbalanced, wobbly and noisy. How I got talked into this model by a Sears salespeople was a big mistake!!!

I purchased a side-by-side Whirlpool refrigerator less than three years ago, but about a year ago we discovered it was leaking from the freezer thats located on the bottom. Initially we thought that if we simply defrosted the sheet of ice that formed on the bottom of the freezer - it would stop the leaking. Its hard to keep up with - I checked into it on the Internet and discovered that there is a clogged drain hole that is causing the leaking.Apparently, a number of people are experiencing the same thing. I called Whirlpool (since our local repairman suggested we contact them because this is a chronic problem and is likely to happen again). The customer service person kept pushing me to buy the extended warranty with their repair that will cost nearly $400!!! Without it - it will cost nearly $200 that doesnt include any parts. Its a new refrigerator, very bad quality and theres damage to our kitchen floor, and then Whirlpool wants me to pay $400 to repair the mess they made! VERY UPSET...

I purchased my Whirlpool gas range about 5 yrs ago as brand new. Two and a half years after purchase, I started getting the F2 error and always had to pull the breaker to stop the oven. Whirlpool would not do a thing, they wouldnt even listen to me. So I bought a new control panel. Now once again here it is the holidays and Ive started getting the F2 error when I try to use the oven. So needless to say this is my last Whirlpool appliance. And the Service Officer wont even listen to me when I say I have to buy a new oven.

I bought the Whirlpool WTW 5000DW1 washer and dryer to go with it. Within the first 2 weeks the plastic handle broke on the dryer. Ive been using the corner of the plastic handle ever since to open the dryer. The washer is the worst washer I have ever purchased in my life. The tub doesnt fill up over the clothes half the time. It is perfectly balanced on the floor but it always bounces around and you cannot open it to rearrange the clothes because they lock the lid. The only option is to try to hold it and wait for it to finish or start over by pressing the button for at least 3 seconds. I have had a few items get shredded by it and a lot of times the clothes dont get cleaned and rinsed properly. Even on 2 rinse option. Just the fact that it has a 2 rinse option is a big red flag. It is supposed to be a energy saver and water saver but that isnt true. If you have to wash and rinse the clothes twice because it has spots from the detergent still on the sheets, something just isnt right. Whirlpool shouldnt even put a product like this on the market. I have owned many Whirlpool products before this but this is the last Whirlpool product I will ever buy. Obviously Whirlpool doesnt test its products or care about quality.

Bought fridge in 2010, I am about to replace the icemaker for the 2nd time at a cost of over $300 each time by a Whirlpool authorized repair tech. No kids in the house and very limited use of icemaker. Motor keeps burning out because of the design flaw per the tech. Very poor design for a $1,500 fridge. Due to these issues I do not intend on purchasing Whirlpool products in the future.

We purchased a Whirlpool Cabrio washer brand new from Lowes. It did great for about 6 months when a terrible grinding noise started. Then it also would not spin dry the clothes - they would come out completely soaked. Repair guy came out and fixed it. Lasted for about 1 year - same thing again. Lasted about 1.5 years this time and now the loud grinding is back and my wife - who Ive heard cuss just a couple times in 20+ years - said, This ** thing sucks. The clothes are soaked. I cant stand this washing machine. So, Off we go to buy a new machine. Definitely not a Whirlpool though. Id give this machine 1 star because it does a decent job for a while but major repairs 3 times in five years is not what I deem an acceptable appliance.

We paid $6,000 over and above my homes purchase price for double ovens that are defective. Whirlpool will not address the problem! When you bake a pie or a turkey, the bottom and center are raw, and the top burns, because the bottom element is hidden under the bottom of the oven, instead of on top of the interior floor area of the oven. Whirlpools new design is defective! The service technician says the oven is performing as designed therefore there is a design defect! However, Whirlpool will not take any action, because the parts are not broken and they send us back to the extended service plan people. It is ridiculous for the consumer to be caught in the middle. Whirlpool does not want to stand by their product.The builder of our home, Coleman Homes in Middleton, ID, purchased the ovens from Whirlpool originally. Therefore Whirlpool says we are not the original purchaser of the product, Coleman Homes are, and Whirlpool cannot do anything because we did not buy the ovens directly from Whirlpool ourselves, Coleman Homes did. The Whirlpool Warranty (waste of money) says they cannot do anything because it is not a parts issue. Coleman Homes says they cannot do anything because the warranty was given to us when we purchased the home. Whirlpool needs to replace the hidden element with a true baking element so the ovens will bake properly!!! Model Number: WOD51EC0AS Serial Number: D52208658

My new washer quit working properly. It does not spin or wash properly.

Purchased my Whirlpool gas hot water heater. After 1 1/2 yrs, the blinking light shut off, called tech at Whirlpool, made me move hot water heater to outside. I moved it outside and when called back, I was then told to send 4 photos to prove that I moved it, in which I did that. He told me that still was not right... and still he would not help with reset. I live in my parents old home w/ water heater in bathroom for 50 yrs. No problem... it was vented thru ceiling to attic. Now it is outside, unlit, in a steel hub (as directed) and still not ok...I have no hot water and have not for 4 weeks now... Whirlpool sucks... never buy their hot water heaters. Had to pay a serviceman $750 to move heater, run cold/hot water lines and gas line and it still does not work... with NO HELP from Whirlpool. Now I am in process of buying an electric hot water heater and have to pay an electrician to run a 220... I am on fixed income and this stinks... biggest regret... WHIRLPOOL.

I bought this Whirlpool Duet Sport washer and dryer, and I have had to constantly bleach out because our laundry smells like mold. I found out that Tide sells a special cleanser for this washer so I have been using that for the past two years. It did not really help. Well, today I accidentally put laundry soap in the wrong dispenser, so I took the dispenser out and was horrified to find mold that was all in the back where the fluid is dispensed, I mean way back in there. I have been suffering with sinus problems, and swelling in my eyes and face. I even went to the doctor, but no one has figured out why. I now know it is the mold from my washer making me sick. Well, my son and daughter-in-law were staying with me, and commented on how bad it was when they used my towels. I am stuck with a $1,600 washer and dryer that is making my family sick.

I bought these products 2 1/2 years ago along with a dishwasher and Microwave, all which are Gold Series. The first month my Microwave broke. Instead of a certain part that they used to use, they now use a Capacitor instead and it broke. The repairman fixed it under warranty, but told me Ill be seeing you again. Then, my oven occasionally says Function not available. Whirlpool wont tell me what the problem might be and they have nothing for troubleshooting this problem in their manual. My only solution is to reset the circuit breaker and then it works for awhile. Now, My refrigerator has ice building up at the bottom of my freezer and leaking all over my floor. I found a Whirlpool bulletin online which explains that this problem is because of a defective part (Grommet) and that they have a replacement part for it and you can get it by calling their customer service department. Why didnt they send out recall notices to their customers?So, on 8/10/2015 and 8/11/2015 I tried getting this new p-trap part, but for two days now Whirlpools computers arent working and they have no other way of looking this stuff up. Very poor customer service and I also waited for a half hour on the phone to be told their computers arent working. How about putting a message on their pre-recorded message letting customers know their computers arent working?

Buyers beware of Whirlpool ovens! We bought a Whirlpool Built-In Electric Oven in August 2008. Fifteen months later, I decided to clean the oven for the first time and when I turned it on the auto-clean, the entire control panel went dark. The technician said he has seen this problem several times in such ovens and was able to repair the oven. I called Whirlpool and they had not heard of this being a common problem. Last week, the air blower wasnt functioning and had to be replaced. I called Whirlpool again and told them about this second incident in a 4 year old oven that is not used frequently. I told them their quality assurance people and/or engineers need to re-evaluate their products. My lesson learned is that I will never purchase another Whirlpool or Whirlpool related product.

40-gal gas water heater - I own several rental properties and unfortunately put Whirlpool water heaters in them when the old ones go. It is because they are at Lowes and they are cheap. Today, another call came in from a tenant with no hot water. I called customer service and they determined I received the repair kit from an original design defect from back in the middle 2000s. Now 3 years later, it goes out again. Because I have already received the conversion kit taking thermal couple threading from LH to RH, I needed another part number to repair for a grand total of $160! The same part before the conversion kit was $60. I will never buy another Lowes/Whirlpool water heater for as long as I live. I own a hundred rentals and Whirlpool will never again see another cent for the junk water heaters.

Ive been a landlord since 1997 and have multiple sets of coin laundry machines. The older Whirlpool machines are great and have lasted 25-40+ years with almost no issues. Replaced a washer with this model 4 years ago and have multiple problems. Im buying a used coin operated washer thats older than this model just to get rid of it. Cost of parts is almost half the cost of a new washer, and adding on labor and time makes no sense. Very happy to get rid of it. Electronics instead of mechanics has been the problem. Electronic switch that is activated with the coin slide broke, the main board fried, and the lid switch has caused problems

I have had the machine pair (Whirlpool Cabrio Platinum) for almost 4 years and up until a few months ago I LOVED the washer. I was advised when I bought the machine to make sure to read the manual, which was very helpful in learning to use it properly. I have never had residue on my dark clothing or ever had the clothes come out partially dry. I use liquid HE detergent nothing powder goes in the machine. I also read many reviews before buying it and a got some advice from them. I have washed king size comforters with no problems. Everything has always cleaned very well. The only issues I have are that when bleach was used in a previous cycle. Ive had a problem with the bleach not being fully dispensed and ending up in the next load. Fortunately it was just towels and not darks!!! Although, I had just bought the towels and now they look tie died which was very upsetting to me. I learned to add water to the bleach dispenser to dilute it and that issue seemed to dissipate. BUT NOW... I COULD THROW A TANTRUM. I PAID 1800+ FOR THE PAIR AND THE WASHER IS SHOT!!! A pretty common problem with the Cabrio from what Ive read. It started by making a very loud noise when spinning, like a helicopter was landing in my laundry room! I continued using it, I even thought the sound was getting better after I did the clean cycle. The last load I did would not complete the cycle because it kept reading that it was unbalanced and unfortunately it was a load of heavy wet towels. I was far from happy when I had to remove them and go to a Laundromat. Needless to say its the bearings and to fix its very costly. I cant even fathom that a less than 4 year old machine needs to be repaired and the cost is roughly half of what I paid for it!!! I do know I will NEVER buy another Whirlpool. What happened to making things to last??? Next machine I will definitely get extended warranty. I can honestly agree with all the other reviews... THIS MACHINE IS HORRIBLE!!!

Whirlpool WMH53520CSO Microwave oven purchased Aug 2014 - The light and fan will not go off when door is shut and not being used. The microwave gets really hot and afraid it will start a fire. I now keep it unplugged and trying to troubleshoot the problem. Not sure if it is worth a repair. Paid $347 2 years ago.

It never seems to clean the dishes and it runs for 3 1/2 hrs. It is suppose to have all these Features but does a very bad cleaning job. I have used liquid soap, the cascade pods and the jet dry, still gives very poor results. Use to have a Kitchenaid that lasted almost 30 years - great appliance...

I was so excited when my husband bought me this as a gift this past year as we are a family of 6 which means lots of laundry. The first few months I assumed it was operator error trying to learn how the new one worked. Well here we are months later googling why it makes my clothes dirtier coming out than they were going. It leaves black linty looking streaks on all my white clothes, both inside and out and leaves white linty looking streaks on my darks, also both inside and outside. It DOES NOT REMOVE PET HAIR AT ALL! If you purchase one, and have long haired pets that shed, expect to invest in some lint remover. Im on my third type in an attempt to save me time. I will say OxiClean laundry detergent seems to be the only detergent that actually cleaned the clothes. Sadly, stores around here stopped selling.And whatever you do, DO NOT USE LAUNDRY PODS. It DOES NOT DISSOLVE THE HOUSING AND LEAVES SLIMY RESIDUE ALL OVER YOUR CLOTHES. I believe this is due to the fact that despite the setting, it uses little no hot water. Which would be great if it actually cleaned your clothes. I could run my clothes under a faucet with no soap and they would cleaner than this pos. Bottom line. Dont waste your money and if you do keep your expectations very low!

Aqualift is a Joke. We recently remodeled our kitchen and purchased a new Whirlpool range model #WFE710HOAE. It came with a feature called Aqualift Technology to clean the oven. The button you push to start it says Aqualift Self-Cleaning. I followed the simple directions and when it was finished I was surprised to find that nothing was clean. I tried it again with the same results. I had to then clean some of it with the enclosed scrubbing pad. You cannot use any cleaners except one that they also send a small sample of. In short, it was like the old days cleaning my mothers oven with a scrub pad and a lot of elbow grease. I spent 30 minutes getting it somewhat clean. I am so disappointed and mad that Whirlpool can just blatantly mislead consumers this way. No one wants to buy an expensive product such as this and have to clean it by hand. You get as good a result if you do not even use Aqualift. My last range lasted 20 years and all you had to do was take a wet cloth and wipe out the residue. Whirlpool is at best incompetent and at worse criminal and purposely misleading with this and other similar models and should recall or be forced to recall and replace these with a working technology. I am surprised that the Federal Government has not stepped in. I would be very supportive and would participate in a class action lawsuit on this matter. As I stated in the beginning, this product is a joke.

We purchased a Whirlpool refrigerator on January 18th. It has never worked since it was delivered. A service call was place the next day. It is now 2 and half months and 6 technician visits later and the fridge is still not working. Whirlpool customer service has been contacted and they want to continue sending technicians out rather than replace the fridge. The customer service manager, Demetrius, stated the additional service calls are not costing Whirlpool more money because the repair company has 90 days to fix the problem so they are not going to replace the fridge. While this may be fine for Whirlpool it is certainly not good customer service. We were told they cant call the service company to get the details of prior visits and that we need to call the service company as there is nothing Whirlpool customer service can do but schedule technician visits. After a lot of aggravation, losing hundreds of dollars of food and hours on the phone here we are without a working fridge. Buyer beware!

Stainless steel, easy to adjust, cools very well installed in a RV instead of standard RV fridge. Took a little bit of carpenter work to make Whirlpool fit but well worth the effort. The only problem I have with the fridge is that whirlpool wont honor the warranty because it is installed in a RV.

Model GB2FHDXWS04 - This refrigerator dumps water all over the floor at least 1 time a week. We just leave a towel on the floor to absorb it because you never know when it is going to happen. Have removed the stuff and cleaned all of the ice out of the bottom of the fridge but in no time it is back. What a crummy unit. I am going to drill a hole in the bottom of it and put in a drain I guess.

Whirpool Part #WPW10564292 refrigerator handle - I am a property manager who has 264 units. We have only been open for 1.5 years and have had to replace 30-40 door handles because they crack at the top where screws are. We tried calling Whirlpool Customer Service because obviously this is a defect and she said they looked in the system and didnt see any recall or issues. We also asked for a representative from Whirlpool to stop out so we could show them the issues and she said we have nobody in the area. We have 9 service requests outstanding that need a new refrigerator handle. On July 19th, we ordered 3 handles from our distributor and we were told theyre on back order until September 6th. When I called at the end of August to make sure we were on schedule with delivery, I was informed they are now on back order until November 5th. I just called our part rep. this morning and now they said the current part number does not exists and gave me the new part # W11026870, and they are on back order until mid or end of November. I am not going to keep quiet about this issue. We have paid $79.89 per handle on a refrigerator that is only a 1 to 2 years old appliance. I am requesting a returned call or email on what you are going to be able to do for us. This is not right or fair to a company that spent a large amount of money to have your appliances in 264 units.

Appliance repairman is coming tomorrow. Washer is less than 2 years old and will stop mid-cycle more than once (I re-start it)... At first when I thought the cycle was done I would get ready to move the clothes to the dryer and realize they were all soapy and sometimes they were just massively soaked so something is not working right. Sensor?? Hopefully not the computer panel as that will be too expensive to repair.

We purchased a brand new home with a brand new Whirlpool microwave in it. It was a combo, over the range/hood vent, model WMH1162XVB-0. Every now and again, sparks fly when preparing vegetables. Three times a repairman came to our home with no results. Each time, the problem persisted, with no improvement. On the first visit, the diagnosis was that we did not know how to properly use a microwave. It was noted that they gave us operating instructions and a personal tutorial to solve the problem.On the 2nd visit, we were instructed to buy a protective cover for our bowls when using the microwave. I asked if this would solve the problem, and was told no, but at least we wouldnt see it. This time, the random sparks happened in front of the repair man. He responded that it was the high iron content in the corn and peas that would ignite the sparks. Also, he said we needed to thaw everything before putting it in the microwave. Again, our issue was listed as consumer-use error and nothing was done.On the 3rd visit, we explained that we could not use the microwave on any setting higher than 70 for risking of sparks flying. We showed him the cover we were using, and the permanent marks being left by sparks. Again, the serviceman witnessed the sparks flying, even on thawed peas and corn that simply needed to be heated. He responded that by adjusting the power, and using the cover, we were obviously learning how to work the microwave and informed us that the next service call for this issue would be at our expense. There was nothing they would do for us, as the problem was our fault, not theirs. We explained that other neighbors with the same microwaves are not having this trouble, and we felt it was simply a faulty unit. He didnt seem to agree, nor care what we felt.I have been using microwaves daily for over 20 years. Our neighbors, having the same exact model, have had no issues at all. I know this is simply a faulty unit, and feel endangered each time I use the microwave. Whats even worse is the way Whirlpool has handled our situation. Our microwave is now 4 years old, and I have learned to rely on my toaster oven. When people visit, we have to caution them on the microwave. I will never buy any Whirlpool appliance for my home again. I do not trust the quality of their products or their service.

Worst company for home appliance... I got my fridge repaired from an authorized service person and next day it again stopped functioning. Upon calling the service center again, they said that few more things needs to be repaired once again and for that fridge needs to be moved to their workshop and for that they will be charging 1600 Rs again. Upon asking for the refund for the useless spare part, the rude service person said ek din k liye to chale tha na fridge, fir kis baat ka refund... Such a ** company is Whirlpool that they are not entertaining any complaint on their all India customer care number...

We bought a Whirlpool range. The same day we got it the burner exploded and my electricity went off. I called the customer service to request a replace, they told me a technician had to go and look at it. They did. I had to miss a day of work as they come between 9 to 5 pm (will not tell you what time). The guy say the range is defective (really!??) and will need to request parts. I called them again (after 15 times you wait minimum 30 min each time). They told me they can replace the parts. I said I bought a new appliance not an use one. Money back. Told me somebody will contact me. Week later nobody contact me and still waiting 30 min each time. I called nobody answer my calls. I wonder I may get somebody if I wait hours? No idea. Please do not buy from this guys... They are bad in all the way.

I purchased a Whirlpool electric water heater from Lowe’s in 2007. It lasted 2 years until a faulty weld on the tank started leaking and flooded my basement. Whirlpool did replace it. However, my second water heater did the same exact thing in a different location on the tank after 2 1/2 years. It also flooded my basement.I am now on my third Whirlpool water heater in 5 years and the one I have now has a bad thermistor. It has cost me about $225 each time the water heater has been replaced. In my opinion, these Whirlpool water heaters are junk and their quality control needs to get out of the break room and start doing their job. Never will I purchase another Whirlpool appliance.

Bought a side by side whirlpool refrigerator last year. Door seal has come unglued so the door doesnt close unless press seal back in Every time we open the door. For the expense I would expect the door seal to last longer than a year.

Whirlpool Duet - Front loading with additional base makes loading and unloading easy. We have had the washer and Dryer about one year now. They were replacements for Kenmore front loaders. We replaced a Kenmore front loading pair that served us faithfully for more than ten years. But when we purchased a new house we decided that it was necessary to upgrade to better units. The Whirlpool Duet pair has performed exceptionally well with one little caveat. Periodically we have to unplug the units to reset the computers when they dont function properly. Small problem, easily solved.

People should consider themselves lucky to get 2 yrs, 1yr, 6 mos out of these pieces of junk. Mine replaced an 8 year old Bradford White that was originally installed when the house was built. Funny thing, we had the exact same BW in our last house. Same problem after exactly 8 years - tank leaked. Anyway, this Whirlpool 40 gal gas was installed by a professional plumber ($200) and ran fine for 6 days before the pilot went out the 1st time. In the next 10 days it went out 9 more times until it wouldnt stay lit at all. I would light the pilot and it would be out in 5 min or less. I watched for the error code the last time - 2 flashes which indicated thermocouple low voltage. This is totally ridiculous. After research - which I should have done before I bought - it looks like a total bad design problem with associated customer service nightmares and much additional cost to the customer. AND EVERYONE WHO MAKES AND SELLS THESE THINGS KNOWS ABOUT IT. Attempting to fix this thing - even IF labor was included - looks like throwing good money after bad. When are these companies going to be held accountable for producing cheap poorly designed products and then let the consumer foot the cost of labor and/or replacement. You can say all you want about less government but this is just a small example of what you get when you have less government. Doing further research, it looks like NO manufacturer of gas water heaters can produce a reliable product now. So now, Im installing a Bradford White ELECTRIC water heater. Thats and extra $250 for the electrical service that needs to go in. AND additional for the actual install by a plumber. At least Lowes is not giving me a hard time about getting all my money back for the Whirlpool since its less than 30 days since the purchase. I guess I should consider myself lucky it malfunctioned almost immediately. Total out of pocket on the initial Whirlpool install: $560. Total out of pocket with reinstall of BW Electric: $1000. My time spent on this mess: priceless. At least we will have hot water, even though it will cost more per month in electricity to do it. Thanks Whirlpool - stay classy.

My son purchased a Whirlpool washer and dryer as a Christmas gift on 12-24-10 from Sears. It didnt wash the clothes properly and I would have to rewash them. Also, it would not spin the cloths properly and the top would take forever to unlock. Then in July, I called for repair because the water would not spin out at all. It took at least two weeks for them to come out. Another two weeks to get the part they ordered then to find out that they also needed another part that was not diagnosed in the first place. After another three weeks had gone by and having to go to the laundry to wash our clothes several times, it was finally fixed. I continued to have problems with the clothes not getting cleaned. How can this possibly be an energy efficient product when you have to do the load twice? I am so grateful to my son for the gift but am so dissatisfied with the product. I rate this product 1 out of 5 stars.

Whirlpool Double wall-mounted Oven model#WOD51EC7AW05. Have had nothing but problems (at least 7 problems). The 1st one is a potential fire hazard. Porcelain/enamel shattered on bottom interior panel of BOTH ovens in less than 60 days (exposing underlying metal to rust). Cracked in an odd stress-pattern that indicates the metal expanded during heating, and the porcelain finish did not tolerate the expansion. The lower oven had only been used 2X before I noticed the fracture pattern. Obviously faulty design; a manufacturers defect. Whirlpool claims it is cosmetic damage and when porcelain eventually flakes off, they will send me touch-up paint. (If I dent the outside of an appliance with my wheelchair, thats cosmetic damage. Its a manufacturers defect if the damage happens during normal operation. The appliance damaged itself, not the user.)The preheat function does not work on either oven. The oven indicates it is 350-degrees, when it is actually 125-degrees. Repairman says this is normal; ignore the indicator and navigate by store-bought thermometers”. The temperature can vary 50 degrees on either side of the actual setting (thats a 100 degree range!). Between the faulty preheat and the wide range in temperature, it makes it very hard to bake bread or cake.The rest are annoying problems: The timer is a single “beep” (not even very loud), followed by another single beep every minute. This is not much help if you are folding laundry while the cookies bake. The windows have so many dots on them theyre not clear enough to see how the food is cooking (or read the store-bought thermometers) without opening the doors. The oven produces a lot of steam that fogs up the windows (Ive never had this happen, and Im past the half century point). The exhaust fan is loud and it blows hot air into the drawer under the oven (another potential fire hazard). Dont buy this oven. It has several design flaws and Whirlpool does not stand behind their product.

It does not clean as well as I would like. I have to wash the dishes before I put them in the dishwasher. It is also much too noisy for my liking. It has the pot wash and the dish wash. It has several types of cycles, long - short and it has a drying mode. My next dishwasher will be bigger so I do not have to run it every day. My next will be stainless. This particular dishwasher is nothing special but I have my eye on one with the buttons in the top of the door so nothing is visible on the surface. My dishwasher is getting older and I will replace it soon.

On March 3, I purchased a dishwasher (Model: KUDE70FXSS1 Serial No.: F10202361) on Whirlpools VIP link, which will more likely be my last Whirlpool purchase based on the slightly damaged product and incredibly poor customer service Ive received. Upon delivery of the dishwasher on March 9, I noticed that the left rear wheel was damaged and slightly bent. I also noticed that the unit was a little off balance. But the delivery person explained to me that everything was okay and that the front legs just needed to be adjusted. I believed him and signed the delivery receipts with the additional note about the left rear wheel being damaged. At the time of delivery, the driver also happened to mention that J.B. Hunt did offer installation services for dishwashers. I then called Whirlpool customer service, which pretty much gave me the cold shoulder, and said that it wasnt in their policy. I had to request the installation service at the time of purchase and Whirlpool would not send someone back out. This made me upset because I initially wanted to have the dishwasher installed but your VIP link didnt show an option for installation. Im not sure how Im supposed to request the installation services when theyre not being offered. But the genius customer service representative thought that I should intuitively call Whirlpool when the link isnt on the website. This is the first demonstration of Whirlpools poor customer service, in my opinion. After a couple of days of driving around to get a hose and a cord to perform the installation, I finally installed the dishwasher on March 12. Once installed, I noticed that the hinge on the left side was rubbing against the tub of the dishwasher. The door hinge was bent and the main tub was slightly damaged. Again, I contacted Whirlpools customer service department who sent out a repairman who confirmed that the dishwasher needed new tub and hinges which were covered under warranty. Unfortunately, he told me that I would not receive a new dishwasher since I installed it myself. He would order a new tub and hinges and transfer all the equipment and wiring from my original dishwasher to the new tub. Essentially, I would have a refurbished dishwasher at a new price, which I do not want.I initially wanted to have the dishwasher installed but your VIP link didnt show an option for installation. If Whirlpools website worked the way it should have and offered an installation service, I wouldnt be in this situation. I would have paid for the installation and the people installing the new dishwasher would have realized that it was damaged prior to them leaving and ordering a new dishwasher. I am a customer and not a dishwasher repairman. No normal person would have been able to catch the damage that is on my machine. Second, I find it hard to believe that Whirlpools policy states to have all the equipment from my original dishwasher installed on a new tub. So, I paid $989 for a new dishwasher thats really a refurbished dishwasher because of the damage. I wish I would have visited this site prior to purchasing. I will never deal with Whirlpool again.

We purchased this washer in 2017, its the top loading Cabrio washer and it has been nothing but junk since day one. Purchased from RC Wiley in Boise and unfortunately did not buy the extended warranty because we trusted that this American company would make a washer that would last longer than 3 yrs. This washer barely washes clothes, leaves a residue on them since there is no agitator, also constantly gets unbalanced or gives and error of LF which means water supply issue when there isnt one. My 15 yr old about has a heart attack when he uses the quick setting and his clothes arent done in an hour and a half. Ive even resorted to turning the thing on to just rinse and spin so things get done sooner, still the stupid washer just sits. I would sell it but I dont want to pass on the pain, so its going to the dump to or to Goodwill cause its not worth the headache. Too bad you cant trust an American company to make a good product. Sad I really wanted to like this washer.

Not digital. Was supposed to be a quiet running machine but it really wasnt too quiet. Its cycles were well timed. Was supposed to be energy star certified, but I have to say that I felt it could have been more efficient. It was a new dishwasher in 2007, but we sold our house & moved since then & currently we have no dishwasher. :( If I had to choose, it would be a Whirlpool, GE, or LG. Easy to use even though not digital. Hot dry or air dry, plus several cycles to choose from. All easy to maneuver through. Standard size, fit under countertop, replacing an older one. I do have to say that it did stick out slightly farther than I would have liked. It was black & easy to clean. The buttons & knobs were black as well. It fit in well with our newly remodeled kitchen. It replaced an older dishwasher that had given out. The dish racks in it were spaced great & the wash ability was great - you didnt have to have an empty space in the middle of the racks which provided more space for dishes. It was also large enough on the bottom rack that I could fit pots & pans in it, even cookie sheets. Many dishwashers dont allow for this. The one thing I would have liked better is if the silverware rack was in the door, once again providing even more space in the rack for dishes.

Bought this microwave combo oven from Lowes. Went to change the charcoal filters, as specified by the owners manual, and the top cover and the side cover fell apart when I removed the filter cover screws. After two appointments the service tech came out for about 5 minutes to tell me that only mechanical failure is covered by the extended warranty which I also purchased from Lowes.The problem with Whirlpool is that they make the top cover, and some other parts, with cheap thin plastic which crumbles when exposed to heat. The repair tech said, Dont worry. Ill see what I can do. And then he left. Actually the warranty booklet said wear and tear is covered in addition to mechanical failure. Its inexplicable to me why any manufacturer would use cheap plastic for an over the range product. And I intend to fight this until I get this appliance repaired under warranty.

We bought our Whirlpool refrigerator model # WRT318FZDB02 July of 2019. We liked it very much. The beginning of January 2022 we started having issues with things freezing. A few days later nothing got cold. The appliance technician that checked it out said our seals on the compressor were bad and needed a new one. He told us we were better off buying a new refrigerator. I contacted Whirlpool support and they told me the same thing. Our previous refrigerator lasted over 30 years!! I would think Whirlpool would make their refrigerators last longer than 2 1/2 years!!

We had an old Whirlpool dishwasher that worked great for over 20 years. It had the ole tried and true knobs in front. We replaced it with another Whirlpool when we updated the kitchen. That one had the new electronic panel in front, it lasted 6 years then we had all kinds of problems and finally replaced it with a Bosch, also with a electronic control panel. We have had this one 4 years and it is not working at all. Wont start and keep a cycle on. Spent $500 on it and its a piece of crap. Thousands of complaints on the internet for these new types of dishwashers. The electronic controls panel are faulty, and probably get wet from repeated use. Go back to the knobs. They worked for years and years!

We have had our catalytic oven explode into millions of hot pieces again for the 3rd time. Contacting them they sold me an extended warranty which Im trying to cancel and have been trying since 30th Mar to contact on ALL of their lines. It is permanently on hold or engaged. This company should be avoided at all costs. If you work for this disgusting company DONT!! You will be out of work soon! It is unbelievable how bad they are at responding to their (now ex) customers. What the hell are we in the EU for when a supposed UK co is Italian and they never respond (AKA 1940). Ludicrous! Incompetent! Stupid! Totally without comprehension. Do NOT buy ANY INDESIT or HOTPOINT products EVER!!! They are dangerous and you will NOT get any help to put them right.

Whirlpool - Back in the 1980s we had Whirlpool appliances that lasted for many, many years. We are now in our mid 60s and retired. We purchased a new home 2-1/2 years ago. Whirlpool appliances were provided with our new home. We were quite pleased at the time. However, we are now sorry we have them.We are very easy on everything we own. When we replace appliances, cars, furniture, etc. we are generally able to sell our used items, which are always in great condition. Unfortunately, this is not the case with our current appliances. I will list the many problems.Combo range hood/microwave oven: it vented absolutely nothing. The microwave oven had its own set of just plain silly issues with the manner in which the touchpad had to be set. The oven did at least work. 2/2013 we had a Broan range hood installed and vented to the outside and purchased a Whirlpool countertop microwave oven. Again we had the little issues with using the touchpad plus the door was very hard to open. This countertop microwave oven failed 1/2015, less than a year of usage. At this time we purchased a Panasonic microwave that is much simpler to use.The Smooth-top range/oven looks nice. It is the most inconsistent range/oven we have ever owned. You cannot lower the cooktop burners to simmer. There is no simmer. On that setting it may as well be turned off. I can set it at about 9 oclock on the dial and some days that may be simmer. Others days it could be higher. Overall, the burners have no consistency. The oven cools quickly and I must be mindful not to toss in a 2nd sheet of cookies without checking the temperature. I have never had to do this on any other oven we have owned.The dishwasher does clean my dishes, thank goodness. However, I have had 2 service calls (under warranty) for a little gasket (hinge pad) which keeps the door propped a bit while loading the silverware into the basket. This piece has failed a third time I will just live without being able to prop the door. And then there is the silverware basket. Each piece must be loaded, handle first, into the slots on the basket. Of course, some of my silverware has wider handles so this does not work well. Such a poor design.The refrigerator was my pride and joy. We paid the extra charge for the French door style instead of the side-by-side style that came with the house. My charges here are more serious. 2 of the little door shelves have broken. Oddly enough these are small shelves which have some items on them that are not used often. If I choose to replace them, it will cost me over 25.00 for each of these little gems. Now, a piece of plastic on the veggie drawer has broken so I must be mindful not to let the drawer drop.Worst of all was the last service call out of warranty. I had standing water/ice on the floor of the freezer. Apparently this was due to a poor design and my service man replaced it with a new P-Trap that actually works. Yes, the original design was bad, yet I still had to pay for the replacement. Seems like this should have been a recall and replaced free of charge. Instead my total charge was 144.06. UGH!!! Now, I do understand I was likely provided bottom of the line appliances with my new home, but to have issues with all of them is ridiculous.

Certain brands of dishwashers made by Whirlpool, including Whirlpool, Kitchenaid and Kenmore, are a fire hazard. Most appeared to be made in the mid-00s. My Kenmore Elite, model# 665.16293400, bought in March 2006, started emitting a burning plastic smell. I removed the door panel and found where the control board wires have been overheating and melting the plastic liner inside the door.Further investigation led me to kitchenaidfire.com, which details the models involved and includes hundreds of reports of fires from these models. I also searched saferproducts.gov and also found over 100 reports of fires from these models. The report logs are growing rapidly as it appears most of the control boards start to malfunction about five years in.I called Sears and they said that Whirlpool needs to do a recall. I called Whirlpool and I was told that they do not make Kenmore dishwashers, only some parts. This is completely false. I couldnt believe the representative was told to tell me that besides the part that is failing is stamped Whirlpool. These Whirpool-made dishwashers are a documented fire hazard and need to be recalled. I do not know what it takes, hundreds of fire reports have been logged and they are rapidly growing, but I hope that it doesnt take someone to be killed before they are recalled.

The machine cleans clothes okay but constantly gets out of balance and sometimes it take all day to complete an entire cycle. It is very frustrating to rearrange clothes, restart the washer, and then wonder how many times it is going to take. It is especially time consuming to wash a large item like a bedspread, not to mention the waste of water. I can expect to reset at least 3 times. The machine is less than a year old. I think it is a design flaw or else I just have a lemon.

Unfortunately where I live the walls are thin. And my neighbors have complained about how loud my washing machine is. I load it correctly and sometimes while it’s washing it rearranges the clothes and it becomes unbalanced and makes incredibly loud thumping sounds when this happens. I’d say 1 out of every 4-5 times. Also I have multiple towels and clothing that have been pulled. The threads of brand new towel sets ruined from the washer.

In the first year of my Whirlpool Washing Machine, the motor quit working entirely. Fortunately, the machine was under a 1-year warranty and the motor was replaced by a Whirlpool service technician. My big complaint with this washing machine is this: Even though you select hot water for the wash cycle, the machine has sensors in it that only allow the water to get lukewarm. If it senses the water getting too hot, it adds cold water to bring the wash temperature back down to 78 degrees F. Next time I will do my research and buy a machine that actually allows one to use hot water.

I contacted Whirlpool in regard to one of their water heaters we purchased from Lowes. It came with a 5-year warranty. At the end of 3 years, the lower element went out. Our plumber took the part back to Lowes, where he stated they normally just do a part replacement with them. On ours, he was told the owner would have to contact the manufacturer. I contacted them and supplied them with the plumbers bill and copies of the front and back of our canceled check, along with all my contact info. Their website states theyll get back with you within two days. I contacted them on March 13, 2013. Today is April 7, 2013 and they havent emailed, called or snail mailed me. After reading these consumer reports, the air has been let out of my balloon. No more Whirlpool products for me! Integrity in our country used to be extremely high. Today it is extremely low as demonstrated by the complaints on this website and now mine. Hey Whirlpool, you suck!

In my wildest dreams I wouldnt have expected that changing a burned out light bulb on a 7 month old microwave would put us out of commission for over a month. Its been 30 days now and Im told it will be more than 2 weeks before the part comes back in stock. Whirlpool had such a good reputation years ago, but thats history. This is a disgrace.

Whirlpool makes a quality product. My gas range is 25 years old and it still performs like new. I’ve never had to have it repaired and it is used daily. If and when the time comes that I need or want to replace it, I will not consider any other brand.

I bought the Whirlpool Gold Series dishwasher on November of 2014 from Home Depot. The first thing that happened was that it started to leak. I called Whirlpool and someone came out to look at it. It took about a week for them to come. They said it was installed incorrectly and they do not handle installation issues. They left. I took the dishwasher out and reinstalled according to the guide. It still leaked. The dishwasher had to be perfectly level before the leaking stopped.The next issue was that the dishes were not getting clean my dishes. The top rack was the worse. I called Whirlpool again. They came out, took the dishwasher apart and said the part called the diffuser had become dislocated. He placed it back into its proper position and left. This was April of 2015. The dishwasher did an ok job. Some dishes still came out with food on it. By the end of 2015, close to the warranty expiring, the top rack was no longer being washed. I took the dishwasher apart from the inside and found the diffuser was not in the right position again. So every time I want to run the dishwasher I need to take the spray arms out and the racks until I have access to the bottom of the dishwasher to reset the diffuser. Now the warranty was expired, Whirlpool wanted about $150 just to come look at the dishwasher. Sears wanted $59. So I called Sears. Their tech said the dishwasher has a broken motor. For Sears to fix it would be around $400. I called Whirlpool. I felt that the motor was already broken within the warranty period and that the problem finally got diagnosed now. Whirlpool felt this wasnt the case. Their price to fix was also close to $400. Now I need to buy a new dishwasher and throw away a one year old dishwasher. Only this time I will buy the extended warranty. Overall, poor product, poor customer service, and poor warranty coverage.

I see that I am not the only one with the same pilot problem. I just purchased this new model that came out last summer. I bought my new water heater in September and just this past weekend, it messed up. I have not had it for 8 months. Whirlpool sent out a technician yesterday and he said the assembly is not good and the pilot would not light. Well they sent me a replacement part and they are coming out today to install it. The funny thing was that the technician said, Oh, these are hard to work with. We have a lot of problems with these models and they just came out last summer. Its the on that has the little box and you push the pilot button in and hold it until the red light comes on. Anyway, he said he didnt carry parts for that one, only the old ones which last longer. The ones that have the black round circle that looks like a thermostat. I said, Really? Well the reason I bought this water heater is because my last one that I bought 2 years ago kept having the same issue. Whirlpool sent me the assembly with the pilot and all 3 times and would never replace it. I got tired of it always messing up so after having it for 2 years, we just dumped it and went and bought this new model. Here we are 8 months since we bought it and the same thing is happening. I am so furious. I am pissed off that they dont recall these if they are defective. Why do they keep selling them if people have problems? My cousin called me a couple of months ago and asked if my husband could check her water heater and its the same type I had and it was doing the same thing. I will never buy another Whirlpool water heater again.

I purchased a Whirlpool Cabrio top loading machine approx 3 yrs. ago. When I first bought it, the machine was super quiet... loved it. I loved the capacity of it. About a yr ago I noticed it started making all kinds of noise, we cant have a conversation downstairs because its so loud. Turns out the bearings are broken. The technician was nice enough to explain to me that its a common problem with those machines. However, Whirlpool is not willing to stand by their product and repair it free of charge. Any other product would of been recalled and repaired. That goes for cars, baby products, and so on. But not Whirlpool, I called and spoke to Andrea in Michigan who told me that there is nothing that they are willing to do. After reading the other reviews and their terrible one star average rating it doesnt surprise me. Shame on me for not researching this product before buying. I hope this saves someone else from making the same mistake. In case your wondering, it cost me $117.00 to have the tech look at the machine. The labor would of cost $125.00 and the part is $251.00........

Whirlpool and their extended warranty is a ripoff! I bought a Whirlpool refrigerator not even two years ago. It has stopped working 4 or 5 times, causing us to lose all our food. When it is working, it makes an awful noise. I have renewed my contract with A&E due to the fact that the frig is a lemon; which A&E is a joke as well. I contacted them 2 weeks ago about the frig not working again. They stated they could not come until Sept 18th, a month later. Come on. Really. They are a ripoff as well as Whirlpool appliances. False advertising is against the law. I also contacted the merchant where the frig was purchased in Hazlehurst GA, who does not care one way or the other. If whirlpool was as great as they seem to think their appliances are, they would replace this lemon in my kitchen. We are elderly and are not able to keep dealing with this issue. I would never ever recommend a Whirlpool appliance to anyone. As a matter of fact, I will tell everyone I know not to purchase one; due to the way your company has treated me and my wife.

I purchased an appliance package Whirlpool Gold series that included a range, refrigerator and dishwasher. This was approximately 3 years ago. The range has already been replaced by Whirlpool after having it repaired twice and, finally, following the complete breakdown on Thanksgiving with turkey in oven. The refrigerator has broken twice and the computer box that controls all functions was replaced twice. The compressor goes off randomly and is currently off again at the moment. I woke up this morning to this and the temp inside is around 50 degrees. Needless to say the food inside is a loss. I will never purchase any Whirlpool appliance again. These were not inexpensive appliances by the way.

We bought my Whirlpool top loading washer and dryer back in 2005, and they have not disappointed. Apart from needing a heating element replaced due to poor ventilation one time, both machines are extremely dependable and wash our clothes quite clean!

My old 25 yr old Whirlpool died and was shopping for a new one. I saw the Cabrio and was really impressed by the features and large capacity interior. I can say that I thought my clothes were getting clean until I looked closely. I have never been so disappointed with this washer. I wish I had my old one back! Clothes arent clean, they are so twisted when I take them out and theres a horrible smell, like oil burning when it runs. The machine would fill up and when it would start to wash, it wouldnt, it would stop. And a loud humming noise was coming from the back.I shut it off and turned it back on and it wouldnt clear. I had to unplug it and plug it back in to clear it and start over. The bearings are gone now and I was going to have a repairman come and look at it, but now I wont bother! After reading everyones comments this Cabrio is a piece of junk and Im sorry I ever bought it! So now Ill be shopping for a new one tomorrow with an agitator!!! Im not impressed with the HE appliances!!! Ive owned this POS for not quite 6 yrs. Expensive to purchase and I will not recommend Whirlpool to anyone! Its sad that companies today make cheap products!! Built to last... ha!! Well never see those again!!

I have a roughly 2-year-old 30 Whirlpool electric range that has just got out of warranty 4 or 5 months ago. It has been a great stove up until the last couple of months. We have had 4 incidents where the burner would shoot up to high on its own even with the knob down at medium or low. 4 times in the last month, it has come close to catching fire while we were cooking. I have contacted Whirlpool about this issue and have yet to get a response.