My NEW Machine Top loader HUGE drum. Have problems with clothes not looking like they’ve even been washed, Spun so hard they are twisted all to heck. And white stuff - my oxy powder maybe? Not dissolved. My old machine was a Kenmore 30 yrs old. Thought I’d be able to trust whirlpool but not sure. Am I missing something in the loading process. Seems to read something bout not Covering the knob on the bottom. Is this true?

We purchase a French door refrigerator model G16SARXXF04 3 years ago with extend warranty and since 7/3/15 stop cooling making ice. Then 3 repair person came each week, 1 week later from the Lowes Warranty Dept. With no solution they replace the main panel, the ice maker. And again 8/14/15 stop working and 4 times I am losing the food. And this last time my husbands medicine which very expensive got damage and cannot use. They are coming again but anytime I take food out to dispose. Couple of day later the refrigerator start cooling so when the repair person comes say cannot do anything because is cooling. They are not giving solution. Call Whirlpool, same. And I am sick and disgusted!!! Dont buy Whirlpool.

Hello. We bought this refrigerator from Costco, so we can have extended one year warranty for the appliance. When we need this then we are not getting help. Our Fridge is not working from last couple of weeks. Technician came a day late to see the fridge, then order the part on the 01/03/2017, I didnt hear back from service provider till 01/11/2017. Finally I got a callback after spend an hour on the phone saying that it will take one more week. I had to call Whirlpool to expedite service and because of weekend I have to wait another 4 days to get the part.There are 7 people living in my house including 2 yr old. We are having hard time with the food and waste of food. We probably throw away $200 worth of food. And spending money every single day on food. I have to buy every other day for my 2 yr old. Whenever I tried to call for compensation, I get transferred to different department. I am so tired with this kind of service. I would never buy any appliance from Costco or Never refer to anyone. Very very bad service.

Had washers model # WTW8500DCO repaired after being install for 14 days. Have had washers repaired every 90 plus days because of constant electrical and mechanical failures. Would not ever buying another whirlpool appliance to my worst enemy. Customer service is a total failure. If you ask a question after talking with you for 5-8 minutes and they dont have an answer they start saying HELLO, HELLO? I have to hang up. I cant hear you. Just a really sad business. Stay away!

I am an apartment manager. We purchased a Whirlpool Refrigerator (Refrigerator FFHT1817LW8) for one of our apartments. When it arrived it was missing a shelf next to the butter dish, also two of the bars that were to go in front of the shelves were the wrong size. This was at the beginning of April, it is now the second week of July and I am still dealing with this issue. The 1st company that was sent out to take care of the problem, A&E appliance, dropped my call so many times I ended up refusing to deal with them anymore. They also sent techs out 2 different times, and both times the wrong parts were ordered. Finally a different company was sent out and they told me that there was nothing that they could do, the shelf did not exist, even though the paperwork that came with the fridge showed a shelf next to the butter dish. Finally Whirlpool offered to order a whole new door but this would take 6 to 8 weeks...I had already been dealing with this issue for over a month. Home Depot stepped up and replaced the fridge; however, when the new fridge arrived it had the exact same issue, no shelf next to the butter dish. That fridge was returned and we ended up getting a completely different model. I canceled the door order with Whirlpool twice! It was supposed to be sent to Home Depot; however, Whirlpool still shipped it to our complex, and to a completely different apartment! It has now been going on 2 weeks almost 3 and the door has not been picked up yet! Despite my repeated calls into the company... I have asked to speak with a supervisor and was told that I couldnt. I have asked to be transferred to and escalated department or complaint department, I was told that I couldnt. There was a phone number I could call to give a compliment to.... LOL!! I would compliment them on their ability to provide the worst service I have ever experienced in my life! I was told a supervisor would be contacting me within 48 business hours, they havent. I have been told that they sent an email in a RED folder to their escalation department and that is all that they can do.... still havent heard anything.... seriously? I have now advised my company to no longer purchase any Whirlpool products... and its funny because we are going to be remodeling all of our units soon and that includes appliances... I have also shared my horror story on Facebook. Maybe as they are going bankrupt they will start to care??? Somehow I doubt it!

I just replaced our Whirlpool Accubake Double Wall oven, model RBD305PDS14, because it fried the control panel after being put on self clean. This was the second time this has happened and I have probably only used the self clean feature three times since we purchased the oven. Im not a specialist in defective product design, but having a control panel burn up two out of three times when the self clean is used suggests a significant problem. I refused to pay to have it replaced again and obviously did not replace it with another Whirlpool product or any other brand associated with the company. I see that this problem has a long history dating back quite a few years with Whirlpool doing little or nothing to resolve the issue. (They just deny any knowledge about any defect in the design.) Fool me once, shame on you! Fool me twice shame on me!

After almost 5 years of satisfactory performance, our $1200 Whirlpool Duet washing machine WFW9400SU1 requires repairs costing over $1100. Similar to another complaint listed, some parts rusted out, leading to extensive damage during use, which we realized only after the spin cycle became incredibly loud. Now the entire gut of the machine (bearing, drum, arm, casing, etc.) needs to be replaced - $900 parts and $200 labor. I trust my repairman (who said theyd seen this type of problem before with Whirlpool) especially because he recommended buying a new machine instead. I called Whirlpool, and they said they could do nothing for me which made me very angry. This is a mechanical problem that could have been avoided by using proper materials. Whatever happened to the washing machines that would last 15-20 years?

I purchased a new Whirlpool Cabrio set, in 2009. I bought the top loading washer, and matching dryer. Since 2009, I have had the washer serviced FIVE times. Bearings, water pump, F1, F2, ul codes, and a few other things, I honestly cant remember. I love this capacity. But that is all I love about this machine. Today, the water pump went out again. I have been reading online regarding loose coins making their way into the drain pump, the hose, and other parts of the washer. I am diligent about emptying my pockets, but, obviously, someone in the house is not. There should be a trap for the coins, buttons, and any other debris that passes through, but, clearly there is not, and it appears I am not the only one with this problem. I am so frustrated. I paid almost $3,000.00 for this set. It was my very first brand new set and I have had so many problems with this. With all of the problems and all of the complaints, and so many similar complaints, why is Whirlpool not acknowledging them? Why are they not doing anything about it? Side note, my dryer works fine.

When my wife and I were planning our retirement, we made a to-do list before we officially stopped working. We are loyal Whirlpool users and over the next 3 years we purchased 4 major Whirlpool appliances in preparation of having 8-12 years of problem-free time as we go from a two-income working family to two people on fixed incomes. I retired in December of 2011 and unfortunately this did not pan out on 2 of the 4 appliances. The washing machine, in late February 2012, blew a transmission 23 months after purchase and 11 months after the warranty expired. Discussions with Whirlpool by phone were unsuccessful in getting the repair covered.Ultimately, this repair cost us $265.00. In late April, 9 months after the warranty expired, the refrigerator iced up and had to be manually defrosted, despite being equipped with ADS. My family and I did the defrosting because it was a weekend and tech support was not available. On Monday, the refrigerator was functioning, so I was told to run it and see what happens and call the tech if it happens again. I had done research online and found many folks were having trouble with this refrigerator model and the main problem was the control board”, a board that is used in many Whirlpool refrigerators. I ordered one after the initial problem and waited for it to ice up again. On Sunday, May 20, it repeated the same symptoms displayed and I put the board in myself and it solved the problem. This computer board cost me $95.81.I contacted Whirlpool about the two premature, post-warranty expiration issues in hopes of getting some reimbursement for the repairs. The Whirlpool rep told me that because there had not been a recall on either appliance, they could not reimburse me. They instead offered me a 6-month extension on the dishwasher I bought last July. I have been on several complaint websites and have seen the refrigerator control board repeatedly mentioned - all within the approximate 2-year timeline as my control board failed. My refrigerator was a GB9FHDXWQ01 model, but the control board is used in many of their refrigerators. If this has happened to you, please contact me at ** and, hopefully, together we can get enough data to get a recall and get proper treatment from Whirlpool. Please include your refrigerator’s model number so I can verify the board is the one in question. Thanks.

This is about my Whirlpool Cabrio top load washer machine (model number WTW6200SWD, serial # CT3670597). I bought this machine in 2007, and soon after, I was having problems with the F1 code. After several trips back and forth to reset the code, so I can get the laundry done, and many frustrations, it was time to call Whirlpool to resolve the problem. I find out that there was a recall for this ongoing issue. They sent a technician to replace the mother board, and everything was fine for some time. Soon after, the machine was giving us more problems with the F1 code, and the UL code. It doesnt matter which way I try to balance the load. This piece of junk will not work. Whirlpool needs to stand behind this issue, and recall this washing machine for good. Every customer should be entitled to a full refund, and a compensation for the many hours of electricity, aggravation, and frustration, wasted trying to get this junk to work.

I purchased a very expensive Cabrio top-loading washer thinking I would never have to worry because supposedly it’s the top of the line, right? Well, I have it a few years; the first week they replaced the basket because it was ruining my clothes. And then I had to replace the pump because of a coin getting caught and putting a hole in the pump. Really? What the heck? Now the basket is all shredded at the top. Obviously that isn’t right, so what do I do now? Replace the basket again? Who gives them the right to charge so much for a piece of junk? Plus, it’s supposed to save on water, but I feel that the clothes don’t really clean well. They hardly feel wet coming out of the machine.

I bought three top of the line 40-gallon Whirlpool electric water heaters from Lowes three years ago. One of the three heaters has already developed a leak. I contacted Whirlpool only to find out that they wont do anything to diagnose the problem. I have to pay labor for someone to come out, diagnose the problem and then pay for the labor to either correct the problem or replace the water heater. By the time I pay the labor costs, I could almost buy a brand new unit.

Fridge was purchased in Feb 2012 from one of the home improvement store chains - along with an extended warranty. It worked flawlessly for about two years, at which point it began draining into the freezer compartment and eventually onto the floor (up to a quart or more at a time). Initially this was a rarer occurrence, happening once every few weeks - but has recently become more and more commonplace.The extended warranty purchased with the appliance covered direct repairs, but am told it will not cover the associated damage to the hardwoods. The local technician contracted for repairs was familiar with the root cause and was able to diagnose immediately upon viewing the brand and style of fridge. As was explained, the drain systems are of extremely poor design leading to icing and blockage of the drain itself during defrost cycles. The only fix at that point is to essentially turn the refrigerator completely off (remove power) and manually defrost the entire thing. The repairs were conducted same day as this review, and as such I am unable to say whether or not the fix is a lasting one.As a note, Ive not experienced any other mechanical or electrical failures or shortcomings with this model. It cools effectively and properly and has not had any history of trouble with making ice - as some other reviewers have experienced. The door containing the ice dispenser (left side) however, does not stay open, swinging shut from full open in a little over 4 seconds. Im still awaiting a complete estimate on the floor, but an initial value on damages is in excess of $1,000. Given current knowledge and the opportunity to choose again, I would select another manufacturer.

I have a Whirlpool top-loading washing machine model 3LA5580XSW3. The timer switch is not working and I have been told that spares are not available. Is this true? Everything else works well. Please advise as I really need a new timer.

Back in the day GE appliances were made to last and last - the only one I have found close is Whirlpool. They have style, dependability and long lasting products. My washer machine has a ton of features and I didnt pay more for any of them.

I purchased a Whirlpool 12-gallon point-of-use water heater as a booster when I was going to get a tankless and when we decided that we didnt need a tankless, I tried to get an RA number through the manufacturer so that the store could give me credit, as it says directly on the water heater, Do not return to store. They said there is nothing that they will do and it cant be returned to the store. So, what am I supposed to do with this water heater now? Before I knew this was going to happen, I purchased a 50-gallon Whirlpool water heater as well. So now, I have the 50-gallon that I have had to replace the element for already and I have only had it for less than a month and a half, and the 12-gallon is just sitting in my garage. Im completely irritated with this company and do not recommend anyone to go with this company! This is the worst customer service!

I purchased this Whirlpool Gold Series Refrigerator WRF990SLAMCO in 2012 and it cost me $2400.00 from Lowes. Worst purchase I ever made!!! I will never again purchase or recommend a Whirlpool product. I paid for extended service agreement from Lowes. Before the first year was over, ice was forming on the inside roof of the refrigerator and the whole cooling system/grid needed to be replaced. Then the cooling system went out, followed by the ice maker (PS the ice bucket container was rusted within the first year), then the whole electrical panel on the front of the refrigerator where the ice/water dispenser is.For the last three weeks I have had water leaking out of the top of the refrigerator adjacent to the water filter. My home warranty wont cover. It is a $400.00 repair to replace the circuit that attaches from the water filter. I called Whirlpool 2/14/2017 to complain about the product. She tells me that there havent been any complaints logged about the refrigerator. Seriously??? Read your reviews! The gal on the phone offered a discount to purchase a NEW PRODUCT! Are you serious??? Take my advice. DO NOT BUY WHIRLPOOL. They do not care about their customers or creating a well made USA product. Ill buy foreign next time!

Whirlpool gold series refrigerator leaks water from freezer after 14 months because ice builds up causing the door not to shut properly and rime ice forms over food. I called Whirlpool and theyve not heard this problem before and stated I should have gotten the extended warranty. This is ridiculous. The internet is flooded with people having the same problem.

My Whirlpool Cabrio WTW5550xw0 has had many problems. It started with the lid lock error, replaced it, lasted about 2 weeks, and got another one. I did the diagnostic test that pointed me to the actuator, replaced it. It worked for 2 weeks, got another one, and then another one. I was getting a bad reading from the control panel, replaced it, and that worked for a while. I found out that the actuator had a little water drops on it. I figured that it must be the tub seal, so I replaced it. That lasted about a week and a half, and it started dripping again. Now, I figured it is that the transmission has bad bearings, that causes my tub seal to leak, that causes water drips to go onto my actuator, causing a failure in that, which can give me all kinds of bad readings on the diagnostic test. I have replaced at least half the cost of the original purchase price on a year and a half old washer. I also bought my son a Whirlpool Cabrio washer a few months before I bought mine, and he hasnt had a single problem.

We purchased a Cabrio top loading washer (WTW6400SW2) and a Cabrio dryer (WGD6200SW1) in 2007. From day one the washer has tied clothes in knots, never cleaned the clothes properly, and sputters the detergent and bleach unevenly. The fabric softener dispenser clogs up too, rendering it useless. The knotting of the clothes leaves them so tightly wrinkled they come out of the dryer very wrinkled. The water level, determined by the washers self-sensor that weighs each load, does not fully submerge the clothes. The manual says this is normal operation for this model and that it will not affect the cleaning process. Wrong. The small agitator is insufficient to clean the clothes but does a wonderful job of twisting them in long, tight knots. I want to kick myself every time I walk past the washer for paying so much money for such a poorly designed washer. I was very sick when they were first delivered and wasnt able to do much laundry. By the time I was well enough to do more with it, I noticed the clothes werent getting clean and were actually being damaged by the washers process thanks to uneven detergent distribution/spotting from the clothes sitting above the water level, and being poorly agitated and rinsed. Before I knew it, my warranty had expired. It was a very hectic year. Ive been very sick. We purchased it from Lowe’s. I had their techs out a time or two to check it in the beginning, but they always smoothed it over with some waffy, generic explanation. Eventually, I was past my 30-day trial period. I was on my own with Whirlpool, whod refer me to the manual and make me feel like I just had to get used to the new technology of the self-sensoring washer. Ive read that Whirlpool is aware of this issue and doing nothing. Ive read other complaints that describe the same problems I have and its obvious this is a design flaw. I appreciate these posts because I least I dont feel like Im insane anymore. No, just horribly ripped off by Whirlpool.

We bought a Whirlpool Cabrio 6300 washer based off the salesmans recommendation (not very happy about this). After the warranty ran out, every time in the spin cycle, it makes a sound similar to a piece of metal banging around inside the cylinder during the cycle. Our friends have told us they had a similar experience and for their machine, they found out the bearings were going out. Weve had this machine a total of 3 years. I doubt we ever buy another item from HH Gregg plus will do our investigation on Consumer Buyers digest before we toss any more money out for a washing machine.

Whirlpool Cabrio top load washer: nice job Whirlpool! You designed a washer that breaks if you accidentally wash a coin! For the second time in a few months, were fixing our washer because a coin was in a pocket. The coin gets sucked into the discharge pump and sounds like popcorn popping when it drains. It rattles around the inside of the machine’s pump until it breaks the plastic pump housing. You will know when this happens because there will be water on your floor. Did you ever consider a screen to prevent a coin from ruining the washer? God forbid someone leaves a coin in their pocket. Well, if you leave a coin in your pocket and wash your jeans, it will cost you a repair every time with this hunk of junk. This would be my last Whirlpool. It will actually be cheaper to throw this thing out and buy a new one, since it won’t be the last time a coin accidentally makes it into the washer.

On August 16, 2016 I received delivery of an Whirlpool under counter refrigerator that I ordered online from Home Depot. Model # WUR50X24EM. Five months later, on January 10, 2017, it stopped working, I called Whirlpool for repair. They referred me to their service company, I called the service company the same day. They had a repairman out on the following Tuesday, 1/17/17. The repairman said that he will need to contact Whirlpool to order a part. Whirlpool sent him the wrong part. After numerous phone calls no one from Whirlpool could figure out the correct part number. The repairman kept sending over pictures and information on the correct part, but this all went nowhere with Whirlpool.On 2/7/17, I called and started yelling. I had been very patient up to this point. I was finally offered by Whirlpool a parts research to determine exactly which part was needed. Plus a $50 Visa card to appease me. At this point, its been four weeks without a refrigerator and no one from Whirlpool has put any effort towards trying to figure out the correct part. On 2/16/17, I called Whirlpool again to find out if they had found the correct part. They told me that the new part had been sent to the service company and Whirlpool scheduled me an appointment right then for Monday, 2/20/17.So today is 2/20/17, the repairman came and went, Whirlpool once again failed, they lied because the repairman came out with the wrong part that was originally sent to him when he ordered the part back on 1/17/17. I called Whirlpool and asked for a manager. They connected me with the Resolution Specialist. I told her everything and pointed out that it has been six weeks without a refrigerator. She said she will take care of it and get the right part ordered. I asked her how long I should have to wait, cause at this point I have waited long enough. She said she will have an answer by the end of this week. I dont believe her, I feel as though Whirlpool is pacifying me. I dont understand why they cant order the correct part.I have no faith in Whirlpool that they will do the right thing or have any understanding on how inconvenienced they have made me. I have no faith to the point that I ordered another refrigerator from a different manufacturer. It will be here tomorrow between 8am-12pm. Oh, and Home Depot, they washed their hands of this a long time ago. And, I have yet to see the $50 Visa Card.

Do not buy a Whirlpool refrigerator. This is the 3rd time I have to call in repair for the ice maker in 4 years. Water poured out on my floor for the 3rd time ruining my floors. Called Whirlpool and said there is nothing they can do to help me. They don’t care about their Customers! I could have bought a new one by now based on repair costs. They don’t back their products. I’m really annoyed now!

We purchased a Whirlpool side by side refrigerator from a local appliance store in December, 2018. We immediately noticed a loud humming noise coming from the refrigerator when the motor is running, which is a lot. We can hear it from our bedroom on the other side of the house. The store replaced the motor and the fan, but the constant irritating humming continues. The store called Whirlpool for advice, and were told that side by side refrigerators are louder. They also said that since it is working there is nothing they can do. We had a Kenmore side by side in the very same spot for over eight years. Never noticed when it was running. We will never buy another Whirlpool product again!

Purchased a 80 gallon Whirlpool Water Heater with a Life Time Warranty. When it overflowed because the system failed to detect the water temperature, called and they sent in the temp sensor (I paid for shipping). Had plumber replace it. One day later the same thing happened, called and they sent in a board. Same exact thing happened. By this time, Im without hot water for over 2 weeks in dead cold January on the East coast. They will replace the water heater but only a 50 gallon NOT the 80 because they no longer manufactured the 80. Option given by Lowes is to add a recirculating pump to give additional gallons. But, of course Whirlpool said NO. They only can give me the 50 gallon. What a ripoff!!! Please, please DO NOT purchase any product from Whirlpool. Now they change the same to A.O. Smith Signature Premier.

Its just OK, the electric cook top heats up slowly, but once heated works OK. Oven is just average! Glass cooktop stains easily and shows some discoloration in places. The glass on the oven door is also discolored on the inside and not cleanable!

I purchased a Whirlpool washer, dryer and dishwasher in 2004. The dryer and washer paint is peeling off the appliance and is rusting underneath. The dishwasher has never dried the dishes appropriately, it takes a few days to completely dry the dishes. I have lodged this complaint with customer service, also. I have always purchased Whirlpool, but I will never again nor will anyone in my family. I feel that Whirlpool should at least look into the problems and not just verbally apologize. Janice **

I am thoroughly disgusted with Whirlpool. How dare they sell the garbage that they put out? I didnt buy the extended warranty when I bought my Whirlpool washer and dryer. Why should I when I put out all the money that I did? I havent had the product three years and had to have a repairman out to fix. And then the parts are so expensive, and they are cheap Chinese junk. I dont understand how something with a name like Whirlpool can put out such a disappointing product. Never again will I purchase your product. And I certainly will spread the word. Greed comes to mind for me. I see you have contributed much money to campaign (Republican). Have you ever thought about what you do to yourself? How absolutely disgusting you are.

Whirlpool Washing Machine Model WTW4950XW0 - This washing machine was purchased as a gift by my father. We have owned this machine for about 2 years. I am very disappointed with the quality of this machine. I have 3 children and several pets. I use my machine a lot and need a quality item that will last. This machine is not that item. Within a few months, the machine was off balance and bolts had to be tightened. We have had problems with the belt, bolts coming loose and the machine not draining.More recently, the machine has become very loud... For approximately the last 6 months. My husband has taken the machine apart and looked for anything to be wrong with it and has found nothing. Now the machine is not running. I will turn it on and it fills with water and then stops. I will clear it out and restart it and it does the same thing. Another issue has been with spinning and draining. The clothes are soaking wet even after the drain/spin cycle.I have researched what could possibly be wrong with this machine and have found a vast number of items that could need replaced. With the money I have already put into fixing this machine in the past and the amount it will cost to fix it this time, I believe I will be further ahead if I buy a new machine made by a different company. I will not be buying a Whirlpool product again.

My Whirlpool washer broke down on July 06, 2014. I contacted the local supplier (Unicomer Trinidad) on July 07, 2014. Their technician came on July 10, 2014. He said that he will have to check and see if they have the part that is needed to repair the machine, they will contact me the next day. No one contacted me. I called on July 14, 2014. I was told that they do not have the part and it has to be order. It will take about 2 weeks for it to reach them, no one contacted me since. I contacted them (Unicomer Trinidad) on August 04, 2014. I was told that they do not have the part and it will take 2-3 weeks to reach them. I did filled out a form on the Whirlpool support site about 2 weeks ago but no one contacted me. I contacting Whirlpool US HQ by telephone, they gave me a number for Whirlpool Florida. I was told that they are responsible for my area but when I try calling the number, it was out of service. When I contacted back Whirlpool US HQ, I was told that they cannot help me check the website for the local representative which I could not find. This washing machine is 10 months old plus I took the extended warranty. It is a Duet WFW94HEXL2 washer.

I will never buy a Whirlpool product of any kind. I bought a gas stove and its a piece of **. Won’t even light. Only way to start it is start boil then switch over to bake then it wont light. So please I ask that you make a product thats worth buying.

My oven was 11 months old when I tried to use the self-clean cycle for the first time. 2 hours into the 4 hour cycle, the oven completely shut down, door locked shut and no lights on the control panel. The repair tech came out on a warranty repair call (no charge), explained that Whirlpool does not use a thermal protector rated for a self-cleaning oven and that it blows every time. He then proceeded to replace it with the same thing because he is only allowed to put in the recommended part, which is not rated for the high temp cleaning cycle. So the oven is usable, but not the self-clean. Since I am at the end of the 1 yr warranty period, even if I were able to get Whirlpool to replace the oven (ha!) there would be no warranty because I only get the original time limit. So if I had a new oven and it blew out, it would not be under warranty for fix/replace. The repair tech said this is a COMMON problem with Whirlpool self-clean.

The broiler came on its own during the night. We went to bed at midnight. 4:30 in the morning woke up to a smell, the broiler was going wide open. It had melted the handle off the front of the drawer. There are cookie sheets in the broiler. We dont use it, we have never used it, it was so hot Teflon on the cookie sheets burnt off. The side of the stove was so hot I couldnt touch it to get behind to turn off the gas. It almost burnt my house down. The carpet and the wall are black in the back.

I have a 2 year old Whirlpool refrigerator with french door refrigerator on top & freezer on the bottom. I am now spending almost $700 to have a new compressor put in because Whirlpool wont back their products.

I have owned a Whirlpool Cabrio HE WTW6400SW3 for two years and have had nothing but issues from the start. Control panel was replaced twice under warranty. Also the clothes (socks underwear) were under the tub blocking the drain. This is not covered under the warranty. I was told by the repairman that this is the usual issue. He told me they took the front loader design and just stood it up with no protection from garments and coins getting under the tub, through the under tub filter often and into the drain pump. You are kidding me? Almost $1000 for this washer and its so ill designed. I have read forums that this has been an ongoing issue for several years yet Whirlpool continues to build these. I dont vent to forums often but just now I finished removing the tub to remove 2 socks and 7 cents. Also, I had to remove the drain pump and found another 16 cents inside it. So far the pump has not been ruined but this time water is coming out from the machine so will probably be ordering another pump for it as well. The wife wants it out of the house tomorrow and not another cent spent on it. But it is only two years old. What do you do? If you are reading this because you are searching for a new washer do not purchase a Whirlpool! I have gotten nothing but grief and was put off by their customer service dept as well. I guess after fielding so many calls about the same thing they have been told to just put all the calls off as no big deal. I am sure Whirlpool is making a killing off the sales on this unit. The claims made during the sale convinced me. What a joke. Look around the internet and you will find hundreds if not thousands of the same issues.

I purchased a Whirlpool washing machine (model: AW01D8810 S silver color) and a Whirlpool refrigerator (model: WBM329 TI) together from United Arab Emirates for Dhs 1999/- & Dhs 1199 /- respectively on 28 Jan. 2011. I sent this machine to my hometown (India) in the same packing and I used the washing machine only for three months and found a complaint. I informed this to service center in Trivandrum, Kerala. Their team came to my home and told me that warranty cannot be given as I purchased machine overseas. They added that the PCB for the machine is having complaint and they dont have stock in India. Also, the machine is no longer available in the factory. The Whirlpool company completely stopped manufacturing the abovementioned model. Again, I came to UAE and contacted GEC group of companies for the PCB part. I got a quotation for PCB Dhs 425/- but the items is ex-stock with them. The machine cost only Dhs 1999/- and if I spend Dh425/- only for PCB, and the machine is with me for the parts since one and half years. I dont know what to do. If I spend another Dhs 600 + this PCB cost then Id rather go for another new branded washing machine. The model of machine is AWO1D8810S and serial no. is 12 nc 859247463000 003. Please advise what to do or if I can find the PCB in Kerala. What will be the cost? I am ready to pay the money for PCB but not for the above rates. Please advise, sir.

The reason for the call was to find out how to file a claim after replacing the ice maker and paying for it the 3rd time, they were very argumentative and would not listen to me about the design flaw in the wire harness that burns up the motor for the ice maker. I found out about the design flaw from talking to the repairman that replace the ice maker who works for Dick Kearsley Clearfield UT. He told me that Whirlpool knows about the problem for the 22 cubic foot and 25 cubic foot refrigerator and that is why they have 2 different new wire harnesses in the box for replacement of the old wiring harness.

I couldnt wait to get a front loader and hated it. As soon as I saved up enough money, I bought the water saver Whirlpool top loader. I love it! The clothes get cleaner and dont smell musty. Im very happy with whirlpool.

My Whirlpool side by side refrigerator which is not 7 years old has had more repairs than you can imagine. After paying over $1,500.00, I have had a repair service come out at least 5 times. Today, they say I need a new compressor at the tune of $850.00. This combined with my other repairs would add up to around $1,300.00. I am certainly not going to invest any more money in this refrigerator. I wouldnt recommend a Whirlpool Gold for anything. Dont know which brand I am going to purchase now as they certainly dont make anything like they use to. Totally disillusioned!!!

Refrigerator ice maker quit working. This is replacement fridge for first refrigerator that quit working same model. This one has electrical burn marks inside behind a panel. Whirlpool says this is normal. How can burn marks inside a refrigerator be normal. If house or fridge catch on fire will be suing Whirlpool. Ice maker and water valve replaced. Still not working. Maybe it has to do with the burn marks.

I am on my 3rd refrigerator from Whirlpool. The first one lasted 8 years, the second one lasted 6 years, and now the 3rd one has only lasted 4 years. This is just too much money to pay for a supposedly nice quality product and it go out as the warranty goes out. The second we had to replace the icemaker 3 times and a compressor. Now the 3rd is not cooling.

I bought a Whirlpool refrigerator water filter from the Marcone distributor. This distributor, whose name I received from calling the 800 number in your manual, did not send instructions on installation. I called Whirlpool and they did not have instructions on installation. The product is 4392949. In talking with your customer service department filters, I learned that the young man knew nothing about filters. He told me that the filter that I purchased was the wrong one. Its interesting that he tried to convince me without knowing my refrigerator model number. I asked if he wanted the model number and he said, yes, please. It was very sad how I had to do a song and dance with an idiot. I had no help from your company. I will return this water filter because I was not provided instructions for installation. Neither can your people produce them. For this reason, I will never purchase Whirlpool again.

I have had my Cabrio set for two years only and the washer has a error code of F6 and E3... pretty much does not work properly and need to swap out main control board which is about 200-300 for the part. I’m very disappointed in this product for as much I have spent on it. My old school top loader lasted longer than this piece of junk! I believe the steam from the wash is going up into the control board and messing it all up! Water and electricity does not mix! Maybe they need to relook at their products. I want my money back!!!

Whirlpool Cabrio Washer model # WTW6800WW1. Bought it July 2009 and it broke Jan 2017... 7.5 years old. Cost to repair $715.00. The technician recommended that I just go ahead and buy a new one... not worth the while to fix. I paid $900 for this machine in 2009. This is an expensive machine, not a cheap ass one. Shame on Whirlpool for selling products that dont last and for making it unaffordable to fix.

Fridge is over 20 years old. Definitely got money worth. Need to replace all appliances soon??? Which model next. So many models to choose. Love one with freezer on bottom.

Whirlpool Cabrio Model WTW6500 - I ask all of you to stay away from the Whirlpool Cabrio sets. I have spent hundreds of dollars trying to fix my washer. I just spent $260 for a computer board. Now it stays on rinse cycle. So now I need the motor sensor harness which is another $90. Service call $80 x 2. So, now I am going to take the computer board back and get my 260 dollars back. For the cost of $400 to fix this washer. You can go and buy a new one for around $400. Then, Im going to the lawyers to file a class action suit against Whirlpool. So, owners; be looking in your mailboxes for a class action suit against Whirlpool for those who own the cabrio set. Im tired of having to deal with whirlpool customer service. Maybe, whirlpool should think of having their laundry made back in America.

GB2SHDXTS02 - Bought the Unit and an additional 4 yr protection plan. Shortly after the plan expired the plastic drip pan cracked and spilled water all over the laminate floor. It is still bucked from the water. Repairman came out and confirmed the crack, but we were without the refrig for a couple of weeks. Now the top doesnt cool, but the freezer does. Problem probably the defrost system, the fan, the control assy, or the thermistor, but I am too old to fix it myself. My fault for not checking ratings before I bought, but built in obsolescence is obvious here. Whirlpool used to be a good company, but I will never or will my family ever buy another appliance from them.

We bought an 80 gallon lifetime warranty electric water heater. We get about 20 minutes of hot water and then cold water. Weve had 2 plumbers out and checked our system and said it has to be the water heater, but they dont want to mess with it in case it voids the warranty. Fine. We called Whirlpool and since the alarm system isnt indicating an issue, they say its not the water heater. We now have to do a diagnostic ourselves to find out if it is the water heater. What? It has a warranty! We are not plumbers! How come Whirlpool doesnt think its their equipment? Weve already had ours checked and it isnt us! So frustrating and we will not buy another whirlpool product again! Not good customer service to promote repeat buyers. Whirlpool, shame on you.

This Whirlpool refrigerator/freezer Model W10314956B was purchased from Lowes on June 29, 2012. Recently noticed rust appearing under ice/water dispenser tray. Requested warranty service, but was told the problem was considered DUE TO WEAR & TEAR! TOTAL COP-OUT! There are NO MOVING PARTS in this area; how can there be WEAR and TEAR? To my mind, this can only be charged as SHODDY MANUFACTURING or INADEQUATE QUALITY CONTROL by the manufacturer.This appliance is only 6 1/2 years old! Consumers expect refrigerators to last much longer than that. The only possible cause for this problem is as stated above: poor quality control by the manufacturing plant, and I completely discount being told the problem was due to WEAR and TEAR! I will think long and hard before I ever even CONSIDER purchasing another Whirlpool product, and maybe YOU SHOULD TOO!One issue that keeps gnawing at me is HOW, since this is supposed to be a STAINLESS STEEL refrigerator, can it rust? The best answer I found on Google was that its likely due to insufficient chromium in the mixture of metals used to make stainless steel. To me this continues to point to shoddy workmanship at the manufacturing plant. I have pictures of the problem, but for some reason Im unable to copy them to this complaint. Probably because Whirlpool is afraid of pictures that confirm their shoddy craftsmanship!

I bought a Cabrio three years ago. Unless you wash everything on gentle and turn items with zipper inside out, it puts holes in everything. Then exactly one week after the warranty was up, it started giving an error code. I called the company and was told this was a common error and they would send someone to look at it for $150+. It would likely be another $300-$400 for parts and labor! I had someone else (not Whirlpool) come look at it and they said it was a bad computer that I should just replace the washer, because it would cost more than it was worth. So for two years, we have had to wait exactly 11 minutes for the washer to fault then restart it and repeat 3-6 times. It takes 2.5 hours to complete one cycle. If this is such a common error, why havent they fixed it or recalled the piece of junk?! Because they can make a lot more money this way! Three people I know have Cabrios and all have the same issue and all happened within a month of the warranty expiring. I am starting to think there is some sort of timer that makes it go bad just after the warranty expires on purpose. I will never buy another Whirlpool, Maytag, KitchenAid, Jenn-Air, or Amana (all the same company with different names).

This thing will not bake correctly, leaves pie bottoms raw, yes we use convection. We have tried everything to get it to bake correctly but to no avail. Top and control panel get very hot when only using oven. This thing is junk, taking it back to Lowes.

My washer and dryer have been a great experience. Doing laundry has never been my favorite chore but these energy efficient and state of the art machines live up to their advertising. One of the best things I like about the washer is the ability to set the run time for a future time. I do wish the dryer had something similar.

Very reliable. Handle large large loads of laundry. Do not have to prewash any clothes. I will always use this brand.. My parents used this brand while I was growing up. There is no other brand I will use. Thank you Whirlpool!

August 26th 2014 purchased a NG (NO GOOD actually natural gas) Whirlpool water heater from Lowes. Model No. N40561-403. Installed it and everything was fine until this morning August 29th 2014. The indicator light was out and so was the pilot. Tried to light it without success. Called Whirlpool and they are sending me a new controller that now needs to be installed. Called Lowes and they will not take it back. Wish I would have found this site prior to this costly fiasco. Waiting on part now and I will keep you informed as to my progress. I have a feeling this is going to be 2 days wasted and $367.00.

Both are Whirlpool Commercial quality. I got them free from my Co-Op. They didnt cost me anything. They have been here for years - at least 18 years. They have performed flawlessly. I would look for anything discounted. I do not have a problem buying scratch and dent items or last years models. I am not big into brand names and their claims. My sister has gone thru several Maytag appliances in just a few short years. I will not buy any front loading washer, its top load only for me. The dryer has to be electric because we do not have gas in my Co-Op complex. I have been lucky to have only two washer and dryer combos since I was a kid. My family bought a Kenmore washer dryer combo in the 70s that lasted maintenance free into the 90s when I got the Whirlpool set that I have now. I only need the basics side by side set ups. Even though I live alone I do a lot of laundry. Since I have had these commercial grade machines I am more leaning toward another set of commercial grade machines. They seem to be able to take more abuse/over loading than the fancy expensive machines.

Its been exactly a year since I first purchased my Whirlpool Refrigerator and its already giving me problems. The ice maker wasnt producing any ice so we replaced the water filter as suggested by the manufacturer. Now the refrigerator is not cool enough. This morning I was giving my kids cereal and poured milk into one of their bowls. After they tasted it the milk was spoiled. Yes spoiled. I was so mad I called Whirlpool and the fastest they can send a repair man out to my home is next week. Really? I said what about my food and my kids? They said its not their problem! I tell you they are so nice and friendly. They really care about their customers! Yea Right!!

We purchased a Whirlpool side by side from Lowes and an extended warranty. Immediately maybe a month the ice maker froze. Ice container in the door. Repairman said design is notorious for this problem. This was an ongoing problem. They replaced icemaker and it continued. Finally the warranty people told me it could be deemed a lemon if repaired for the same issue 4 times in a year. They deemed it a LEMON and I received a store credit for the purchase price less the warranty amount. I purchased a new LG French door. No issues and its been 5 years. If you have an extended warranty do some checking on the lemon.

I purchased my Whirlpool Double-Oven one year ago and couldnt wait to use my new oven. I was told it was so efficient because I could use the top oven for quick baking instead of heating the entire oven (plus I could set it at different temperature settings). About a month in, I cooked 2 pizzas side by side. The first one burnt to a crisp and the one right beside it was doughy on top and burnt on the bottom. Not thinking, I blamed the pizzas! I also blamed myself, thinking it was me not being used to the stove.A few weeks later, I baked cupcakes. About 15 minutes in, I smelled burning and the cupcakes were raw on top and burnt black on the bottom. I called Whirlpool and they sent a technician out and he replaced the circuit board/clock. Worked for a couple of weeks and then the burning began again. Called Whirlpool again - another technician came out and adjusted the temperature. Here I am again, had to call Whirlpool again.This stove has been so inconsistent and Im so tired of wasting food because of this stove. My 4-year old Whirlpool dryer also went out last week so needless to say, Im not very fond of Whirlpool right now! If you are planning on buying a Whirlpool product, buyer beware and I hope you have a lot of patience...

I bought the WP Cabrio washer on 10-18-16 from Lowes. It does not wash well, my dark clothing came out with white spots all over them even after I rewashed them x 3 and the lighter clothing you dont see the spots so you are wearing dirty clothes. Also, it is making a lot of noises while running. WP should pull this model off the market.

Does the CEO know you do not stand behind your products? My washer is not even a year old and cost about $400.00. And you have stuck about $1800.00 into repairs instead of replacing a lemon washer! The washer had problems the 2nd month I owned it and you stuck a new clutch in out. Now just about everything replaced, it still does not work so I will order more parts. This is ridiculous. I would love to hear back from your CEO and would like to be reimbursed for 5 days of pay to take off and wait for repair men, laundry mat fees, etc!

I purchased this microwave in September 2010. It was installed in a vacation home, so it has actually been used for less than one year. It has now stopped heating food for the fourth time. The previous problems miraculously fixed themselves after flipping the fuse for a few minutes. I guess I should have been suspicious at that point, but I figured maybe I had overheated something. But this time, the problem has not corrected itself. The Whirlpool representative that I spoke to, while very polite and personable, only scheduled a service call that will cost me $89.95 PLUS parts and labor. I asked her if other people had reported this same problem, since it had happened to me several times. She told me NO. I decided to do some research myself (yes, I know; I should have done this BEFORE I spent $578 on a worthless product) and found that many others have had the same problem, and that this is obviously a defect in the design of this unit. Unfortunately, I purchased the entire Whirlpool package because of a special rebate available at the time. Now, I am wondering if my other appliances will begin to break down in the near future. After reading about the experiences of others, I am calling to cancel the service visit. I will be removing the microwave from my kitchen and purchasing a new one. Whirlpool has lost a customer. I will NEVER purchase a Whirlpool product again.

Whirlpool Duet - they are highly rated and are aesthetically pleasing. Highly rated, they are expensive, my last Duet w/d didnt last as long as expected. Ive had to repair both machines once since I purchased them. Good quality is of utmost importance, plenty of washing and drying options, front loading washing machine, full size extra large capacity, attractive machines, good reputation for quality and lack of repairs.

The exterior look of the refrigerator (WRX735SDBM00) is impressive and the stainless steel does not show finger prints easily. It has two french doors on top, a middle drawer, and the freezer drawer on the bottom. The interior is 25 cf, but there isnt much space, even with reconfiguring the shelves, and the crisper/meat drawers are so small, that a large bell pepper wont fit. When one French door is closed it pops open the other door, which then does not close back tightly. Although there is an alarm system to warn a door is open, it only works if the doors are open and not just cracked. We have to constantly push on both doors to be sure they are closed tightly, even after washing down the gasket to get a better seal.

We bought the Cabrio less than 5 years ago. First of all, a high-efficiency washer should not require an extra rinse after each wash, but this one does. I cant see how thats being efficient. The washer, even for a small load, can take up to 54 minutes, and then when you tack on an extra rinse, its well over an hour, so what you may be saving in water, youre spending in electric and wait time. And then, there is still a soap/water scum left on the clothes, which is only evident on the darker clothing. Now, just recently, the washer is stopping, and NOT unlocking after about a minute into the start cycle. I will have to cancel the wash, turn it off and unplug it before I can get it opened. Im sure its something to do with the electric panel, which after reading the reviews, we are not going to fix, and we are headed out to buy the traditional top loader, NOT high efficiency, which I suspect will still be more efficient than the Cabrio.

As a busy mom with 11 children, I needed a refrigerator that could stand up to the demands of my family. This refrigerator is great and meets my needs, but could use a few improvements. The side refrigerator shelves are not on very sturdy. When my daughter removed a jar of mustard, the shelf came off the door, fell onto the floor and broke. This could be solved by improving the gripping strength (increase depth) of the refrigerator door shelf holders. Additionally, the sliding freezer shelf is always crooked and has to be manipulated into place. This is most problematic when the freezer shelf is full. The freezer is not smudge-proof, but clean up is easy with a damp towel.

We bought this dishwasher because it was rated on the quieter side... It was purchased in 1999 and is still operating like new. I am amazed it has never broken down. I have wanted to replace it but my wife says Why?

Multiple issues with this two-year-old refrigerator. Do not buy! The exterior stainless steel doors rust in sporadic locations. According to a quick google search, it is a widely known issue that Whirlpool has not addressed. We have never used abrasive cleaners, only wipes that are made for stainless appliances. We use them on all of our stainless appliances. The fridge is the only one that now has 10+ areas of pitting rust. It continues to spread! What the heck?Secondly, the ice maker stopped working at 16 months. First it was just the auger that stopped turning. Which was inconvenient but not the end of the world. It still produced ice, but we had to open the door and pull ice out instead of having it dispensed. Now it has stopped producing ice altogether. We had the repair guy out today. Apparently, the motor for the auger and the actual ice maker are not receiving power any longer. The certified tech said it was either the main control board or bad wiring somewhere from the control board to the ice maker.For a small fortune, we can try putting in a new board. If the new board doesnt work, we will then know it is a wiring issue. If it is a wiring issue, we will have paid for a new board that was not needed, and we are out of luck completely on the wiring issue. Part of the wiring is sealed within the freezer door. A new freezer door costs nearly as much as the fridge. Part of the wiring is sealed in the back of the fridge. It is impossible to open the seal without breaking the fridge, because the back is a sealed system. But it does keep our food cold. Just dont put anything the top shelf of the fridge because it will freeze. Thanks for the 1 year warranty Whirlpool! You timed it perfectly! What a joke.

We bought a new Whirlpool washer/dryer 6 months ago. Dryer is ok, seems to take a long time to dry. Washer is horrible. It constantly goes off balance and shakes all over the floor. Once opened, the clothing may be a little off, but not enough to cause such commotion. SO FRUSTRATING! If we could afford to replace these, they would be out on the curb today!

Purchased a Whirlpool french door refrigerator at Lowes less than two years ago. Last week the freezer compartment failed, out of the one-year warranty of course. The independent tech who came to service the machine told me of all the refrigerators he services Whirlpools are the closest to total junk and he would never recommend them. Wish I knew him before I bought this soon to be piece of trash. The CEO of Whirlpool, Jeff Fettig, received total compensation valued at $14.4 million in 2010, up about 15% from a year earlier, the appliance maker reported in a securities filing recently. Appears to me that Mr. Fettig is ripping off customers for his own gain, with his boards approval. Shame on all of them -- another example corporate rip offs that are plaguing our nation.

I wish I had gone on this website and read the reviews before I bought my washer about two years ago. I thought the Whirlpool Cabrio was going to be a good machine because of the brand name and because it is one of the more expensive washers. Like many others have said, I am disappointed with this washer. I bought it because it has a large capacity, but mostly because it has a hand wash cycle and a deep water soak. I have found that the only cycle that actually may get clothes clean is the Bulky Items cycle, because it actually covers the clothes in water. Some of the other cycles dont even get the clothes entirely wet. And the deep water soak doesnt wash the clothes, rinse them, or spin them dry. I might as well pre-soak clothing in my laundry tub, and then put them in the machine to wash them. Prior to this machine, I had a Maytag Neptune front loader, which did alright, but it had a few problems. I am ready to go back to the inexpensive agitator machine my mother used to have, if anyone still makes them. They at least got the clothes clean, and you could soak clothing if you wanted to. Im sorry that I bought this expensive washer. I wish I had bought a relatively inexpensive, simple machine. One good thing about this machine though is that I was able to wash a sleeping bag on the Bulky Items cycle. So, I didnt have to take the sleeping bag to the laundromat. Whirlpool needs to improve this machine or go back to the drawing board and create a new one.

Purchased a Whirlpool hot water heater from Lowes. Heater has 6 year warranty. Hot water heater is 1 year old and the pilot would not light. Contacted Whirlpool warranty department to what the failure cause. A new control was sent and replaced by a qualified journeyman plumber; still not working. Called whirlpool warranty department, told control valve must be faulty. We have gone 5 days with no hot water. I am not waiting another 5 days to get hot water. I am having the plumber take out this worthless Whirlpool heater and haul to the scrap metal business. That is where I should have sent it from the get go. Dont purchase a Whirlpool product. The money should be spent on a product that works and will last.

My Side-by-Side Whirlpool fridge which I bought very expensive in Colombia one year ago had the glass shelves totally cloudy and foggy. You could hardly see what was inside. 8 technicians were sent through the authorized center to meet warranties to check the fridge. The first 7 technicians(!) did not have a clue of what the problem was. After many calls, they sent a supervisor who discovered the problem and finally, after 10 months of this battle, they changed the fridge for a new one. But guess what?! I received the new fridge 2 weeks ago and the new one has exactly the same problem. I am very disappointed and I do not know what to do at this point. Going through the same process again makes me sick but losing my money and all the time invested in this product makes me furious. Is there any way that Whirlpool can help me through this forum?

I have bought and used other dishwashers (different brands). They lacked quality, quiet operation and efficiently and effectively cleaning dishes, pots and silverware! My Whirlpool dishwasher is far better than all of them. It cleans and makes my dishes sparkle. I would not buy anything but Whirlpool in the future.

I bought a new Whirlpool fridge that has been a piece of junk since the day I bought it. The minute the warranty expired. The thing broke down. The corporate service center was a joke. 15 min wait time just to get through. Then a runaround of misinformed referral numbers. Minimum charge $200/30 min just to have a service rep even look at it. And then $100/hour + parts after that. Highway robbery. My doctor doesn’t even charge me that much. I will never buy a piece of junk WP product ever again. Their customer service is rude and non-existent. The company does not stand behind its products. Don’t buy!

I purchased a Whirlpool range from Lowes for $750.00. After 13 months, the digital circuit board went out and cost $580.00 to repair. I thought this was odd since the range was fairly new. The service tech said the boards are a common problem. Two years later, when using the self-cleaning mode, the door was locked and the board was out again. So this must be the issue because that is the same problem that happened the first time. This must be a design flaw! The board cannot handle the heat generated in self-clean mode. Way to go Whirlpool, put the board near the oven door where it is subjected to extreme heat and melts!

My refrigerator is about 7 years old. Has performed great. Good use of room inside. Easy to clean. Bought only Whirlpool products for years however since the last purchase of a range a couple years ago the quality was greatly diminished. May be changing brands now.

Whirlpool Duet Sports washer purchased 11-08 was found defective by service technician due to improperly secured bolts on counterweight at factory. I contacted Whirlpool service and was informed that warranty will not cover any parts or labor. I ordered parts for repair. It will take at least 2 weeks until arrival and repair of item. Clothes washing now were taken to town for washing at additional expense. After repair, only 90 days of warranty was given by the service technician. The cost of $260 to repair item for a possible life cycle of only 90 more days seems ridiculous.

In 2008, we also bought a Whirlpool 40 gallon gas hot water heater with flame lock, Model #BFG14040T3NOV. We too purchased from Lowes. The plumber was here yesterday to replace the thermostat for the third time in 4 years. We also suffered through cold showers, warming water for dishes and sponge baths. We are in our 60s and are worn out arguing with these people. If there should be a class action law suit, you can count us in. It is not right to have such a faulty product out there by Whirlpool. This is still America, right?

I purchased this rather expensive gas range and use the oven very little. We are empty nesters that eat out every day. Went to use oven and it had error code for cooling fan. Called repairman who replaced sensor and oven worked (literally used two times in 4 months). Now error code again. When I checked the code I realized this is a problem with these stoves. Whirlpool why no recall or free fix?

My husband and I purchased a Whirlpool water heater from Lowes about three years ago. We have had trouble ever since! The pilot light will not stay lit. We have done everything imaginable to try to repair it. Every time I call Whirlpool, I get the same reply. They email me some instructions on how to repair this piece of crap. I dont understand how they can make a product that they do not stand behind. Whirlpool use to be a reputable company, not anymore! I will never buy another Whirlpool product ever! And I will tell everyone that I come in contact with not to buy from them either. I am also considering filing a lawsuit against them for making such junk! Do not buy Whirlpool water heater.

Bought a Whirlpool washer and dryer in 2/2013. In 5/2014, the washer went out of balance, but corrected itself quickly. Since then, it sounds like a cement mixer during the spin cycle. It took one month to get someone to come out and look at it. Apparently the bearings went and the part alone costs $450! Add another $250-$300 for labor and I could buy another washer. We called Whirlpool, who were unwilling to do anything to rectify the situation, i.e., replace the washer, send a replacement part, give us a discount on the replacement part. We didnt buy the extended warranty because who would think that a brand new washer would crap out after 15 months... and theres only the two of us.Not like Im washing clothes for a family of 5! I only needed a new washer/dryer because I moved out of state and didnt want to move the ones I had. Regretting that decision. Its unfortunate that there has been a decline in the manufacturing of goods to the point that they can be considered a throw away item. Will NOT be replacing this with another Whirlpool.

I have spent 30 minutes trying to change light bulb under the oven and get the cover plate back on. I watched the film on how to do it, it was amusing to watch the struggle to get it on. It was amusing to say the least. Whirlpool watching it??? I do not believe whoever designed this worthless time consuming light cover never tested it one time, or it would had been more user friendly. It amazes me what kind of trash they can build for us consumers to have to deal with at times. Tomorrow this overhead piece of junk is coming out and being replaced by a non Whirlpool one. I am going to get a tractor and smash it into little pieces and put on side of street with a note saying this is what happens when you try for an hour to change the bulb.

Plastic comes off drawer when you pull it out! Trim around glass cracked. Drawers cracked. My drawer literally has a hole in it! Warranty doesnt cover that! When checking reviews on amazon people all had same complaint and when they reorder product it does the same thing. This fridge was purchased less than a year ago! I purchase it from Discount Direct, a Costco outlet store!

I have not use wash machine for 46 years, however, since I the caregiver for my wife (with Parkinson), Im the user of our washing machine, High Efficiency Whirlpool for 8 months. It Is very easy to use including the dials. It is very efficient to use.

I havent had my Whirlpool Cabrio washer for even 5 years and I have had to replace the glass lid and now the tub bearings need to be replaced... I have read countless complaints for the same issue. I feel like Whirlpool should at least send out free replacement bearings and the $85.00 bearing press tool that you will need if youre handy enough to fix the problem yourself. PS to all of the poor victims of Whirlpool bearings, go to Amazon and you can buy the bearings and the tool for about $150.00. You will need to order bearings part #10435302 and the bearing driver tool #w10447783... And as far as my matching dryer - knock on wood - it still runs great.

The washing machine is making inviolable noise. I had purchase a semi-auto Whirlpool washing machine from Lotus Koh-e-fiza, Bhopal two months ago. Initially, the company sent a man for demonstration, and at that time, the machine was making a sound and the mechanic removed his back plate and his components and saw that the plate of heating rod is unscrewed. He temporarily tightened that plate with normal screw, and after two months, the same sound is coming again.At present, we are not using the product for the past 5 days and launched a complaint to customer care. The call attender said that the problem will be solved in 20 hours but no one came within 4 days. Today, 21 September 2011, I called to customer care. He was telling me that the complaint has been attended by our attender and at present, no complaint is pending. The washing machine is in warranty period and I am not satisfied with the service of Whirlpool. At present, I am using the product of Godrej and LG, and the service of both company is very good then Whirlpool.

I agree with the comments already made. My crisper drawer plastic rectangular piece just literally decomposed! It shredded into little pieces and cracked and broke, dropping one side of the draw set. I called about it - nope, not under warranty - replacement cost? Merely $150 so my drawers could be in the refrigerator. Also, because of the stress of the angle the drawer holder was when it broke, it cracked the drawer at the back - and the drawer had one grapefruit in it at the time. (Not considering replacing - cant imagine what that would cost when the little brace piece approx 14 was so expensive.) The flap - yeah, it split. I am a single person, no kids EVER in my refrigerator and I travel so much that I am barely home 20% of my days. The refrigerator gets very little activity opening and closing the doors yet the flap sliced. HOW DOES THAT HAPPEN??? With any break in the seal as they called it, the refrigerator starts collecting moisture inside (and I live in the desert so we have very little moisture in our air) and drips or starts causing frost build up on the icemaker. Yesterday, once again, the icemaker stopped working. When I asked about replacing the flap I was told the entire seal needed to be replaced @ the cost of $232 PER DOOR!! Right now with just the plastic rectangular piece and the bar between the two drawers (BTW the rollers on the frame are not included with the frame purchase they announced) I have $614 in repair parts WITHOUT fixing the icemaker! Last night water was running in my refrigerator from the icemaker. I WILL NEVER BUY OR RECOMMEND WHIRLPOOL TO ANYONE EVER AGAIN. I have been a Whirlpool ONLY customer for over 45 years!!!! They told me that I had to schedule an appointment with a service person at a minimum of $100 cost to me - JUST TO FILE A COMPLAINT with Whirlpool! They only take complaints from service people submissions. I advised the Whirlpool representative to start looking for another job because if this was the way they treated lifelong customers, her job may be eliminated due to No Customers! Does Whirlpool seriously NOT CARE about their customers? #WhirlpoolSux #WhirlpoolRefrigeratorsAreMoneyPits #WhirlpoolDoesntWantCustomers #WhirlpoolDeservesToGoOutOfBusiness #DontBuyWhirlpool #WhirlpoolFrenchDoorRefrigeratorsHorrible #NoServiceFromWhirlpool #WhirlpoolDoesntStandBehindProducts

I purchased top load washer and dryer from Lowes last week. When I was washing clothes the first time 12/4/18 (the day Lowes delivered) I washed in quick wash setting, machine was showing me all stages of the wash on the progress lights. It took about one hour for one load. Today 12/11/18 I spoke to your customer service associates Trina regarding the issue with my top load washer wed4815ew1 serial m82572023. I was told a technician is schedule for repair tomorrow. I try to quick wash two loads, washer progress light only went to wash mode only. I had to press start/pause, select drain and spin to remove excess water. I started 8:30 am and finish around 1 pm. I was waiting for the cycle to finish, twice all progress stages light went blank. I have no idea when it will be done. Machine made noise, not spinning, no water in it. The dryer wtw4816fw2 serial c84621285, I dry at energy prefer setting, when the clothes was dry, dryer continue without the buzzing signal to stop. I had to keep watch of the time and turn it off manually so it not energy efficient when I have to monitor when clothes will be dry.

I thought the Calypso had issues until I got the Cabrio. It does not use enough water to get the clothes clean, it leaves them in a tangled mess, and no matter how carefully I load the clothes it is always off-balance making enough noise to wake the dead!

As soon as we bought our new microwave, I saw what appeared to be hair on the door. I tried to scratch it off but I could not so I wondered if it was a crack but I could not feel it. As time went by, many other lines appeared but I could not feel them, just see them. After a couple of months, I noticed the first crack could be felt and then soon after that I could feel the other cracks. The first crack goes from the glass to the edge of the door and is wide open and the door edge kind of just hangs there. There are now about 20 cracks and the door will most likely fall apart soon. I called Whirlpool and they lied and said there have been no complaints at all about their doors. I read them some of the names here on this site having the same problem and the best they can do is offer to sell me a new door for $180. I told them that their product was defective and need to be recalled or something and he again tried to send me to the parts department to sell me a $180 door. I told him if that is how Whirlpool treats their customers, I would no longer buy anything from them.

WORST EXPERIENCE USING WHIRLPOOL REFRIGERATOR. I purchased a Whirlpool Refrigerator in July 2013 (Model - Whirlpool Ref New 495 CLUB IMPERIA). Suddenly it stopped working on May 12 and I registered a compliant to the customer care. Engineer came in same and I was surprised by the service, he checked and said he rectified the problem and he left. But the problem was still there and it was never rectified. I launched the complaint again on May 13 and engineer came again and said there is gas problem in Compressor and he left by saying that another engineer will come to refill the gas in compressor. Next day new engineer came in he checked everything and said this compressor is not working and needs to be replaced. I said go ahead and replace it, he said it will take 1-2 days. I said “ok lets do it.” But now theyre saying that they do not have the compressor in stock and they will change the appliance. Again as I do not have another option I said “ok lets do it.”Now the drama start: they are saying I need to pay 20% as a depreciation of the total cost of the refrigerator + INR 1000/- (Cartage) + difference of the new refrigerator which comes to around INR 21,000/-. Well can someone tell me why I need to pay this huge amount when my appliance is still in 10 years of warranty and its just compressor problem and rest of the product is just fine. After fighting with them come to a conclusion that I need pay INR 10,200/- and I will get the new appliance. Now when I already paid the DEMAND DRAFT (DD) of this amount now no one is responding to me on when I will be getting a delivery of the new Refrigerator. Only God knows when I will be getting this. In this HOT summer we are facing a lot of issues just because of their bad service. No one from Customer Care is giving me any response nor are they taking my calls now.Now can someone tell me what I should do? I am left with no option and thinking of taking a legal action against them and thinking of launching a complaint in Consumer Court against them. Please give me your suggestions and send me your response at **. If anyone from WHIRLPOOL is look into this, please help on this matter urgently and respond me back ASAP.

We have a small space that fit a washing machine and figured we could add a dryer on top but didn't have an outside vent, so took a chance in this model. It fit perfectly in the space and saves us from a regular trip to the laundromat. It takes a bit longer to dry but is energy efficient.

I love the look and performance of my Whirlpool Dishwasher. It could be a bit quieter, but overall I have no complaints. My washer was already installed in my home when I purchased it and I must say, it helps when the family gets together and you don't feel like washing the dishes. The dual chamber pod holder is great if you need to use and the heat function works wonderful. I don't have the problem of the left over water that a lot of dishwashers leave behind and no spots!

Im so disappointed with this product. Its only a couple of years old, which seems fairly new as my old washer was over 20 years old when I finally got rid of it because of the noise it was making! First, the Cabrio stopped draining and spinning, even though the display showed that the cycle was done. Phoned Whirlpool, and the best they could do was send out a repairman - at our cost, of course! We refused, and kept using the machine - put it on for an extra drain and spin. Then, it stopped working completely! My husband hauled it out to a repair shop and was told it needs a new motherboard at a cost of $400 plus labor! This was an expensive washing machine, and I feel Whirlpool should offer its customers better service! I guess we need to buy a new machine - definitely not Whirlpool!!

I have called Whirlpool multiple times because our washing machine model #WFW9290FW has been out of service for 5 weeks now. I have been informed that I need part #W10604640, which is on back-order and they wont give me any idea of how long it is going to take to get this part replaced. Apparently, there are 96 total people who also need this part. I find it hard to believe that a company this big would not have this part on hand and they would not have any idea how long it would take to get it replaced. I asked them to give me a new washing machine for free to replace it because of the poor service and the unreliable washing machine. They told me they could give me another washing machine at 40% off, but based on the lack of follow-up and the amount of time that has passed since my initial call, I dont want another Whirlpool product. This is the worst customer service ever.

Its supposed to be energy efficient yet it takes AT LEAST two times as long to get one load done, regardless of size or cycle preference! Now laundry takes all day! Literally! And why is there a lid lockout? Did someone accidentally fall in? If I drop something after Ive pushed start, I have to wait until the machine unlocks the lid. Why? This seems counterproductive. Its a top loader!

Moved into a house with a 2009 Gold Series Dishwasher model GU2475XTVY0. It has never worked since we moved in 3 years ago, always left dishes musty and poorly cleaned. We basically used it as a rinse/dry and pre-washed everything by hand. Even then it would mold up frequently and required manual cleaning. Total piece of junk, but looked really nice, stainless finish. Yeah.Latest chapter is it completely stopped working. Called a tech out for the usual $80+. His advice: this is a total lemon, and has been from the start. Not worth repairing. So Whirlpool, is this the standard you have now? 5-6 years for a dishwasher life cycle? Noted that my fridge is a matching 2009 Gold series, it has also had several problems with keeping a steady temp and has gone through 2 control boards at a hefty fee each. I guess Im done with Whirlpool, running out of appliance brands to blacklist here...

I purchased the fridge 2nd hand in 2013. It was 10 years old at the time. It is still going strong & I purchased it because it has a frost-free freezer that never needs de-frosting and I love the features & size - its the PERFECT FRIDGE. What I look for in a fridge is its colour - I like metal, steel grey colour. I go for reputation & quality. Frost free is the biggest factor that determines my purchases, long-term (10-year min.) warranty & guarantee, size.

Just bought this washer, its making a lot of noise, sounds like something is grinding (metal, gears, etc). I thought Whirlpool was suppose to be good. I just had my Maytag go out after 18 years of service, thought about getting another Maytag but found out Whirlpool makes those. As many complaint as I see, seems there needs to be a class action lawsuit against Whirlpool for shoddy work.