On March 3, I purchased a dishwasher (Model: KUDE70FXSS1 Serial No.: F10202361) on Whirlpools VIP link, which will more likely be my last Whirlpool purchase based on the slightly damaged product and incredibly poor customer service Ive received. Upon delivery of the dishwasher on March 9, I noticed that the left rear wheel was damaged and slightly bent. I also noticed that the unit was a little off balance. But the delivery person explained to me that everything was okay and that the front legs just needed to be adjusted. I believed him and signed the delivery receipts with the additional note about the left rear wheel being damaged. At the time of delivery, the driver also happened to mention that J.B. Hunt did offer installation services for dishwashers. I then called Whirlpool customer service, which pretty much gave me the cold shoulder, and said that it wasnt in their policy. I had to request the installation service at the time of purchase and Whirlpool would not send someone back out. This made me upset because I initially wanted to have the dishwasher installed but your VIP link didnt show an option for installation. Im not sure how Im supposed to request the installation services when theyre not being offered. But the genius customer service representative thought that I should intuitively call Whirlpool when the link isnt on the website. This is the first demonstration of Whirlpools poor customer service, in my opinion. After a couple of days of driving around to get a hose and a cord to perform the installation, I finally installed the dishwasher on March 12. Once installed, I noticed that the hinge on the left side was rubbing against the tub of the dishwasher. The door hinge was bent and the main tub was slightly damaged. Again, I contacted Whirlpools customer service department who sent out a repairman who confirmed that the dishwasher needed new tub and hinges which were covered under warranty. Unfortunately, he told me that I would not receive a new dishwasher since I installed it myself. He would order a new tub and hinges and transfer all the equipment and wiring from my original dishwasher to the new tub. Essentially, I would have a refurbished dishwasher at a new price, which I do not want.I initially wanted to have the dishwasher installed but your VIP link didnt show an option for installation. If Whirlpools website worked the way it should have and offered an installation service, I wouldnt be in this situation. I would have paid for the installation and the people installing the new dishwasher would have realized that it was damaged prior to them leaving and ordering a new dishwasher. I am a customer and not a dishwasher repairman. No normal person would have been able to catch the damage that is on my machine. Second, I find it hard to believe that Whirlpools policy states to have all the equipment from my original dishwasher installed on a new tub. So, I paid $989 for a new dishwasher thats really a refurbished dishwasher because of the damage. I wish I would have visited this site prior to purchasing. I will never deal with Whirlpool again.

In May of 2010, my husband and I purchased a Cabrio washing machine. By the fall of 2010, I had put in a call to Whirlpool due to the washing machine chewing holes into clothing and not cleaning the clothes. Some of the clothes would come out of the washing machine with dry spots on them. Whirlpool sent out two different servicemen and even though one of them replaced the agitator we have still had problems with it. One of the servicemen even tried to tell me it wasnt the machine but it was my detergent (I use HE Purex dye free). I was told by a service rep at Whirlpool that there was nothing more they could do and I would just have to deal with it. I understand that products go faulty but with good customer service these issues could be resolved. Whirlpool obviously has little regard for their customers. I have contacted the Better Business Bureau. Hopefully they can get results.

The electric Whirlpool double oven range seemed like a good choice for a single person. I bought it in 2016 around the same time I had some personal setbacks. After finding my emotional equilibrium I decided to return to my much loved baking. While I have no other complaints on this range the ovens are a problem for baking. The digital oven temperature readout doesnt reflect temperature fluctuations in the ovens. Once you enter your desired baking temp the readout never changes even after you open and close the oven door say to take out cookies. Given some of my poor results I suspect even when Im not opening and closing the oven door the temperature is not maintained. I was going to get an oven thermometer but the user manual says it wont reflect an accurate temperature due to way the elements cycle to provide a consistent temperature. Ha! If you want to bake this is not the range for you. My inconsistent results and too often wasted ingredients frustrate me no end.

They are good washers but they are overpriced. They have way too many functions for doing laundry. I know everyone wants their washer to do it all but the machines just can’t. There is no washing machine in the world that can sense a stain and pinpoint it and remove it.

Im no longer buying Whirlpool products. They do not all up and are made like crap. My Cabrio washer being the most recent problem. Hinges broke on the lid and the drum spring broke. Out the door it goes! Im having my American made Speed Queen delivered tomorrow, the last Speed Queen I owned last over 30 years.

I purchased Whirlpool dishwasher in March of 2011. In July of 2011, the stainless steel front started getting rust spots. Called Whirlpool and they sent a local repairman out. After 3 weeks, I called Whirlpool again and was told that the rust is cosmetic. I insisted that I have other appliances with stainless steel and they do not rust. Either they used a inferior grade of steel, or its not steel at all. They repeated it was cosmetic and they are unwilling to do anything about it.

I earlier filed a complaint about the Whirlpool Gold microwave arcing within a minute of cooking frozen green beans and causing burn holes in the food. We contacted Whirlpool’s customer service and were told that the machine was no longer under warranty, but we could have it serviced, repaired and have an additional year of warranty for $259. We took a pass on that. Further trial and error along with research helped us come to the realization that the arcing was caused by the high mineral content of the green beans. Whirlpool did not tell us this, but we found the information provided by others. We no longer cook the particular brand of green beans which seem to cause this event. The microwave is no longer arcing. You would think Whirlpool might be aware of this.

My washer is less than a year old and wont spin out all the water. Ive called out a repair person and they told me there was nothing wrong with the machine, and to read the manual!

This is the only time in my life when I have seen a Microwave behave so badly (and one that is relatively expensive). The microwave is defective out of the box. Seems like there is a comWhirlpool MWA269 (4You)mon trend with Whirlpool products and cheap Chinese boards. The microwave never stops working once the timer runs out. It will just keep going. Model is Whirlpool MWA269 (4You).

I bought a new whirlpool washer 12/15. In May 2016 it stopped spinning fast, clothes are coming out wet, still waiting for it to be repaired. Waited 3 weeks for a part, repairman came out today, it did not fix the problem. Now it doesnt work at all. Service tech said wait another week for more information. Called whirlpool. They offered me a $50 gift card to cover the laundromat. I paid $1200 for this washer. whirlpool doesnt care. I want a replacement. They said the warranty covers repair only, but they cant fix it.

The unit had all the features that we wanted and considered essential. The unit only weak issues is temperature(s) in both sections. The freezer is very poor with ice build up on the food stored for more than a couple of days. The manufacturer has been very weak in support as to how to solve this problem.

Bought this new in Oct 2012. A week back stopped working. After a week found out it needs new compressor and will cost 1,096.00. Paid 2,100 for this new and now need to buy another fridge but not this make.

Certain brands of dishwashers made by Whirlpool, including Whirlpool, Kitchenaid and Kenmore, are a fire hazard. Most appeared to be made in the mid-00s. My Kenmore Elite, model# 665.16293400, bought in March 2006, started emitting a burning plastic smell. I removed the door panel and found where the control board wires have been overheating and melting the plastic liner inside the door.Further investigation led me to kitchenaidfire.com, which details the models involved and includes hundreds of reports of fires from these models. I also searched saferproducts.gov and also found over 100 reports of fires from these models. The report logs are growing rapidly as it appears most of the control boards start to malfunction about five years in.I called Sears and they said that Whirlpool needs to do a recall. I called Whirlpool and I was told that they do not make Kenmore dishwashers, only some parts. This is completely false. I couldnt believe the representative was told to tell me that besides the part that is failing is stamped Whirlpool. These Whirpool-made dishwashers are a documented fire hazard and need to be recalled. I do not know what it takes, hundreds of fire reports have been logged and they are rapidly growing, but I hope that it doesnt take someone to be killed before they are recalled.

The W/D combo-Cabrio is crap... Dont buy it. Salesperson @ Lowes told us all washers moving away from the agitator to ones like this so we bought it. The washers does not clean everything - does not use enough water to clean - leaves your delicates so wrinkled and clothes in general beat up. The dryer decides when it thinks your clothes are dry when they are actually still very wet... very noisy. Whirlpool must have sold out because quality integrity sure is gone.

Just about three years old our washing machine started making a horrible noise and soon after a horrible smell. Won’t complete spin and dry. The bearing inside the drum has failed. The pump is making an unusual noise. I see a lot of reviews about this product. I find it strange that it appears to have a good rating at all the advertisers but in reality it’s really a horrible machine. Shame on Whirlpool for our landfills, dumps and recycle bins with absolute garbage plastic and metal Has to be recycled. We have only disposable garbage for appliances.

Bought the oven Model RBS275PRS 7 years ago. Since then door handle broke 4 times! Control panel had to be replaced once. Paid $750. Spent over $500 in repair. Now handle broke again but part discontinued. Can throw the oven away...

Retail price, $3100. Purchased from Sears Outlet for 2/3 of that amount due to dings on a side panel, back and some blemishes on the front. Still sold as new with a new warranty (Good thing!). Ive had full use of the unit for 1 month out of 3 that Ive had it. Freezer stays at a temperature in the mid-20s and, after 4 repair visits, it turns out the compressor is faulty and now Im waiting for the 2nd part to arrive and be installed to see if that corrects the problem. Sears stepped away from the problem saying it will be repaired. Whirlpool has wonderful telephone support that is totally committed to me staying with a faulty appliance until its fixed. My view is that a unit that expensive, should be no problem to replace allowing Whirlpool to take as long as they want to make repairs and re-sell it. But no; their commitment is to keeping the refrigerator in my house and running a service tech back and forth while I continue tossing food that cannot be used.

This product deserves ZERO stars! I purchased a Cabrio washer - dryer in October, 2013. I have carefully followed the instructions for the washer. I am hugely distressed about the large amount of money I spent on a washer that is absolutely terrible, horrible, awful., no words can adequately express how bad this so-called washer is. The low-water washing has torn up all of my new towels in the matter of a couple of washes. It has completely ripped out the hems of the towels and pulled long ragged strings in the towel. And these were not cheap towels. I am mad at myself for not researching better before buying. I hope my complaint can save another consumer from the misery I am suffering because of this shameful product.

We purchased Whirlpool Cabrio Washer Model #WTW7300DW0 and Dryer in 2013 from Home Depot. The washer is the worst appliance we ever owned. It makes a horrific metal rubbing noise during agitation. The Whirlpool assigned repair service provider, after 2 trips and $300 has been unsuccessful in repairing the problem. Even after he called Whirlpool direct for assistance. Given that we used a Home Depot Gift Card for purchase, the repair expense is rapidly diminishing any benefit to keeping the machine. Well not even consider purchasing Whirlpool again.

This microwave is one of the best Ive ever used. Ive had several brands from generic on up and this one takes the cake. Its very reliable. It works excellent and heats up fast. Ive had no problems with it working to full capacity or any fear of it breaking down. Its pricey but well worth the cost if you want worry-free warming and cooking.

I purchased a new Whirlpool Cabrio yesterday. When I went to use my new washing machine it did not work. So basically I have a brand-new washing machine that is a lemon. I will highly recommend do not buy any Whirlpool products.

I purchased a Whirlpool electric water heater in August of 2008. The unit had a 12-year warranty on the tank. On January 21, 2012, I discovered that the water heater sprung a leak somewhere in the tank shell; it’s not the pressure relief valve, thermostat or anode port. The tank was never abused and operated well within its design limits. Not sure what caused it to start leaking into the catch pan and out onto my laundry room floor.I purchased the tank at Lowes and went for the longest tank warranty to reduce replacement intervals. I sent Whirlpool an email on 1/22/2012 explaining my problem and I referenced this site. The next day 1/23/2012 I receive a call from Whirlpool (Chris) asking me about my problem. I explained again and they gave me an RMA number and told me to go to Lowe’s and they would replace my hot water heater. I went straight to Lowe’s customer service and within an hour I was on my way home with a brand new hot water heater. Thank you, Chris, Whirlpool and Lowe’s. I am very happy with my outcome on this issue.

Warning to anyone considering this washing machine. It has actually destroyed some of my clothing by twisting and tying legs and arms of pants and shirts tightly together and giving the clothes a beating rather than a reasonably careful washing. Rubbing your clothes on a rock at the bank of some river would be preferable to using this machine. It does not provide enough water to wash clothing without abusing it. I blame myself for assuming that no company would attempt to put a product that performed like this on the market. I bought this machine at hhgregg.

I purchased a Whirlpool Cabrio just over a year ago. The washing machine does not clean clothes! While under warranty, a service tech came out to look at it. After hearing the problem, he replied that it was a common complaint and that he could not fix the machine because the problem was that it is so poorly made that it simply does not work. His recommendation was to come to terms with the loss of a thousand dollars as Whirlpool would not rectify the problem.Whirlpool really showed their true colors when they refused to cover the repair tech visit. Whirlpool supervisor Kitty explained to me that customer advice was not covered under warranty and that we would have to pay the bill. Highlights of her argument were that we should just rinse the clothes multiple times and they would eventually get clean. She also mentioned that if the machine really did not work as described, we should have complained sooner even though it was still under the one-year warranty. Whirlpool will sell you junk backed with horrible customer service. Beware!

Broke within a year, company wouldnt back its product. Went out for another range, chose a different brand. Make sure you know the companys policy in case of breakdown. Sometimes, even though it might be an off brand, might turn out to be the option. Think outside your norm, listen to employee, other consumers. Just because its on sale doesnt mean it actually does its job.

I really like my new 5 burner gas double oven gas range made by Whirlpool. Except for 1 minor flaw where the backsplash panel warped at the beginning and was promptly replaced by whirlpool I have had no problems with my range, love having 5 burners and a double oven. Plus the left front burner has a much bigger burner with higher btu which helps water come to a boil way faster than any other ranger I have ever had. That is a real nice feature and I really like having 2 ovens, When cooking on an average day for my small family there is no need to heat up the big oven and the little oven is just the perfect size to bake 1 or 2 dishes. And on holidays when I am cooking for more people or many more dishes I have the capacity to cook more items.

Sounds crazy, but the outside of my stainless steel door is all dented. I live alone and one day noticed that it looks like someone body slammed my fridge. Is there air in the door panels that could be escaping or something like that? Anyone hear of this?

We have a Whirlpool washer wtw5640xw2, we have been experiencing burning wire smells for some time. We had bought the extended warranty. Lowes sent out a repair company. They replaced the main board and the problem has continued. This has been as intermittent problem with the burning smell. We experienced it this week really bad! I thought the machine was on fire. We called the repair company and they said they had fixed the problem. My husband called the Whirpool number and they said they would NOT do anything to help us. We are trying to get help from Lowes where we bought the washer. I am terribly afraid to use the machine. This model needs to be discontinued.. We bought this machine 5-07-12. If we dont get some help, we are going to our lawyer.

We bought this washing machine in 2013 from Plass, an appliance store in Chicago that is now out of business. The top loading plastic lid that holds the glass piece snapped and broke. I called the company, and they said that there is not a recall but that I could order parts. They put me on hold, and 10 minutes later, I was on the phone with a company in Missouri that wanted to sell me a lid for $219.38 plus tax and shipping. I am surprised to see that others are having the same problem and that there are no recalls from Whirlpool!

Weve owned a Whirlpool Gold Series Dishwasher for about seven years. There has not been a year that has passed that we have not had to place a service call with a local service provider. (Each service call costs $85.85.) The upper tray has come off the tracks more than 10 times. The drainage mechanism broke the first time we used the dishwasher. The fuse box (which is amazingly a self-contained, enclosed, black box) has blown twice, has to be completely replaced, and costs over $180. The second time it broke, I ordered, paid for, and had delivered the replacement part only to find out that the broken part suddenly started working again. (I guess Ill have the $180 part for the next time it breaks.) To suggest that this product is junk is an understatement. It will be replaced very shortly.

We purchased a Whirlpool refrigerator on October 18, ‘11 in Viveks at Tambaram. Next day itself, 19th of October, 11, the door lock of the fridge is not working and the defrost light is also not working. Immediately we logged a complaint in Whirlpool customer care, which is in Chennai (mothers care). The engineer came and he removed the lock and he said, “Its a new model lock, we dont have any spare. We will raise an incident to Whirlpool and will replace with a week.” But almost one month over, today is the 21st of November, ‘11. We called the customer care office more than 10 times in this period, but we are not getting any response from them. Today, I spoke to one of the executive in the customer care Mr. R. and asked about the status. But he said we dont have that lock and he asked me the copy of the purchased bill of the refrigerator for replacing the unit. Really, its very poor customer service and I’m very much disappointed with Whirlpools product. We used Kelvinator for more than 11 years and we never had any problem. But with this Whirlpool product, within 2 days we faced these problems. Cooling coming out through the lock hole in the door of the refrigerator. Electricity consumption is more. No defrost happens automatically so far. Almost, it seems that the refrigerator may go down to critical condition. Request your intervention to resolve the issue as soon as possible.

I purchased a brand-new, $4600 36 gas range online. They finally installed all appliances by 10:30 pm last Friday, July 8, 2011. On Saturday, July 9, 2011, I woke at 2 am to weird smell (gas). I opened all the windows and went back to bed not sure since we never had gas before. Gas company came out that day and determined that the burners were bypassing gas. Jenn-Air said it was normal for some gas to come out and that they have sent the repair technician out three times to not find any leaks. The gas company red-tagged the stove saying it was hazardous. Jenn-Air has terrible customer service. I was on the phone Monday to Friday this week, every day talking with safety managers to supervisors with no results. This will be the LAST Jenn-Air purchase EVER!

3/16/2019 washed a load of bed sheets, on the white clothes cycle, put the wash in at 9:21am. Left the house at 12:41pm. Wash still not finished! It was finished by the time I arrived back home, I was gone about 11/2 hrs. I have yet to complete a wash cycle in less than 1hr 15mins. I hate that I have no control over water level, that I have to put detergent in the bottom of the tub, and the damn lid locks! My clothes dont feel clean. Why does big brother get to decide how my wash should be done, when they dont pay my water or electric bills?

GW399LXUS range is Dangerous. Sheet metal cuts your fingers. In over 6 months, Whirlpool has failed miserably in fixing the problem. Bad replacement parts. Incomplete parts shipments. A dozen service calls. The local independent service companies are the only ones who have acted professionally. Other than the poor people who answer the complaint lines, nobody at Whirlpool seems to care. The product is poorly made and the product support is not competent. The range may have the features that we wanted, but who needs all this headache?

This ref model # wrf736Sdam13 is less than 6 months old. The doors have never lined up. At the top is a 3/4 gap and it is 1/4 at the bottom. This is a side by side. Sometimes the left door will open on its own. If you stand to the side and look across the front, the left door sets out about 1/2. My wife and I have contacted whirlpool many times and they will not do anything. I am ready to get another ref and get what I can for this piece of JUNK. We built a new home and purchased all whirlpool appliances and do not like any of them. Will never buy whirlpool again. Very dissatisfied with all – RANGE, DISHWASHER AND THE VENT HOOD. PS, the vent hood sounds like it is crushing ice when you cut it on. Very, very DISSATISFIED with all of them.

I am concerned that Whirlpool microwaves installed over the stove have extremely faulty doors. I have two homes in which I have Whirlpool microwaves, and both have huge cracks in the door and small pieces inside the doors beginning to fall out. It deeply concerns me that it will cost more to replace the doors than to replace the microwaves. I have always believed in Whirlpool appliances but now feel that I will have to change brands. My question is “What in the world is wrong with your doors that they crack so easily and the company holds no responsibility with such faulty work?” I would simply think that this was just a faulty door on my microwave, but I have two that are cracked! This definitely means you have a faulty product.

This dishwasher does not clean the dishes. Having said that most of the dishes are too oversized for the small capacity. Perhaps the fact that this is such an old dishwasher. I’m not sure but none of the dishes get washed. About the only thing that works is the dryer heater. Sorry to say, I’m not happy with this dishwasher and wouldn’t recommend it to anyone.

Purchased Whirlpool Gold appliances for a kitchen reno two years ago. Fridge and stove from a dealer and microwave from Lowes. Fridge - After one year the ice maker quit. $200 part plus labour. Seal on fridge door not sealing. New hinge and washers to adjust. $30 plus labour. Stove - three different stoves were delivered with the same paint flaw on the top of the control panel (3 inch section where paint did not adhere or was scraped off... Same spot on all three... clearly a factory issue). Stove door - when you touch it the interior light goes on. Warming button and switch was broken when purchased but didnt notice. Whirlpool wont warranty. $48 plus labour. Last piece in this puzzle... Microwave - magnetron went and wont heat. $300 plus labour. Obviously time to change brands. Now to figure out who is NOT under the same manufacturing umbrella.

We have a Whirlpool Gold fridge that was manufactured in 2009. MOD: GS2KVAXS01. SER: HRY0570897 and it has not been cooling properly for the last few weeks. Some days it is fine, the next day not and we have had to throw our a lot of rotting food. We got the fridge checked out and were told the Electronic Control Box for the fridge was not working. My question is, why would a Whirlpool Gold fridge that costs $1800 or so have such a large issue with 3 years? Its practically a brand new fridge and Im outraged that a large part of the fridge is not working. I understand parts break and there is warranty but its pretty bad that after the warranty expires the control box would become defective. I have been a loyal Whirlpool customer and solely buy the brand and this break upsets me very much. Especially since replacing the part will cost me $400 plus labor, we are talking about a part costing 30% of the total fridge cost! That is ridiculous. I am hoping there is something you can do to rectify this, as a fridge manufactured by what I thought was a great company should not cause such an issue and I would like to continue to buy Whirlpool products but not if this is the case.We have called Whirlpool customer service many times to be ignored, berated, told I cannot speak to a supervisor and nothing will be done. Never in my entire life have I ever known a company so horrible to exist. I have had bad service before but this takes the cake. Plus, no company that I have ever dealt with would ignore you and not provide any discount or remedy. I cant believe this is a big brand with the way they carry on. You would assume they would be some one person owned company who doesn’t have a penny to spare. I don’t respect this company at all and expect a resolution because they are truly insulting in all the channels.

This is a good size fridge/freezer with double doors 25.4 cu ft, its given us good service for 13 yrs without any problems. My only complaint that I wish it was more quiet. (Whirlpool brand) double doors, ice maker w/ water and lights.

Size was greatest consideration, then cost. Next was power consumption. Quality claims were of no value, since ALL are made in China/Korea. Korean made would be a better choice than China. Am satisfied, but not greatly, as refrig. bottom freezer died a few days out of warranty. YouTube video had my exact refrig. so fixed it myself. Bottom freezer drawer keeps coming off its slides, but I live with it. Top refrig. section freezes things on top shelf, but 2 and 3 shelves down, temp is 39 to 42 = cannot get even temp. As a former inspector, I know about air circulation, crowding.

I bought a Whirlpool French door, freezer drawer on bottom at Lowes 2 years ago for $2,600. The refrigerator needed a new motherboard within the first year and now that it is in the 2nd year, service is required again. The repairman ordered the part and came the 2nd time to replace the part upon receipt. Now it needs the 3rd part since it is still not working. I have a herniated disc in my neck and had to remove everything from the refrigerator and freezer to take downstairs to salvage our food. Now I have to go through the same thing again for the 3rd time after the additional part comes. This refrigerator is junk. I asked Lowes for a new replacement but of course was denied. Does anyone know a good lawyer for this type of situation? I never had a problem with an appliance like this.

I bought fridge model WRS571CIDm02. The worse company in the world. Since I bought this fridge have a consistent problem with the evaporator fan. It makes noise. Geek Squad came 3 time in 3 years to replace the same part. Now the 4th time I ran out of warranty and Whirlpool dont care. On top of that the stainless steel is rusting. It is not stainless steel. It is a nightmare. Avoid at all cost. If there is zero I would give it to them.

I purchased a refrigerator Model# WRF736SDAW12 on 8/9/14 and from day two, Ive had nothing but problems with the ice maker. We NEVER use crushed ice, but we get a lot of crushed along with cubed and crushed/shards of ice all over my fridge, hands and floor. My daughter (wearing her heels) already slipped and fell while walking past the fridge, not realizing that there was ice lying on the floor because my floor is light/multicolored, so we cant see the ice.After several calls, the repair person replaced all the components of the ice maker and the repair person was told (2/26/15) from the Whirlpool tech that we would just have to live with the problem because its normal and he was advised to tell me to get a larger glass. The repair person looked at my glass, seeing that it was already large, shook his head and said Whirlpool must want me to start using a bowl to catch all the ice. I couldnt believe it?! I bought this fridge expecting to receive ONLY cubed ice and yet I dont, so Im sure why they put that cubed feature on there when I cant utilize it. I only want a little ice, but the first thing that comes out is the crushed ice, and in order for me to receive more cubed ice, I have to fill up the entire cup that includes the crushed/shards of ice which floats to the top and ends up in my mouth. Thats the purpose of me selecting cubed, so I dont have to drink it!After the repair man left, I called customer service (2/26/15) and she told me that ice gets stuck in the chute?, so thats why I get crushed ice, but its normal she says. How is that normal? Please read all the reviews/complaints from both the Whirlpools and on Home Depots website for this model and you’ll see this is a problem, there is a flaw in the design.I cant believe a big company such as Whirlpool would treat me so poorly and brush me off like this. After the many posts I put on their Facebook page, they over and over say they will be in contact with me. I have yet to hear from them. I found another story on Pissed Consumer where a senior fell due to the ice falling all over the floor, so its not just me that it has happened to. Theyre putting people in a hazardous situation and they dont care.I have an autistic son who gets ice constantly, I can’t supervise his every move and I’m not able to keep up with his dropped ice nor can he remember to look down for it. I’m concerned that next time my daughter falls; she won’t be so lucky and could sprain or break something. How about my visitors? Do I worry about them suing me when they fall? I’m not so annoyed at the fact that I step on water with my dry socks or the 24/7 noise from the motor or the left door not shutting all the way than I am with the safety of my family.

Strange bear like sound when it washes. We stopped it and on again, sound gone. Water on full water pump drain attitude ok. Big lid (grey) inside on. Ran some time water draining with tablets to make it clean and run better. Had someone to look for it, no sound. But when we now turned on, it sound like a mumbling high sound from inside machine or upper lid. We have some thermostat error a few times now. No hot water condition and no washing in high temperature. Håkon ** was the inspector of this strange thing happening. Could this be dangerous to let it run?

I have a Whirlpool Gold convection self clean oven. I have now purchased the fourth fuse in the past four years, which is the last time. I will never buy Whirlpool products again. The only fix is to order fuse before cleaning oven.

When I moved into my current home, this dishwasher(Whirlpool Quiet Partner 1) was already installed. It had never been used until I moved in. After two years of 2-3 times a week use, I have major problems. It will not complete a wash cycle, regardless of what settings I use. It runs long enough for the soap dispenser to release the Finish tablets which dissolve, but then the dishwasher stops running. The dishes are not clean, and neither is the interior of the dishwasher. It also appears to be leaking when it runs. I cannot afford to replace it, so either I will repair it myself or use it to store pots and pans.This is not my first disappointment with a Whirlpool product. A Kenmore refrigerator made by Whirlpool lasted 7 years before the compressor failed. Apparently, the self-cleaning coils werent and caused the compressor to fail. The refrigerator I have where I now live is a Whirlpool over 20 years old and runs perfectly. Apparently Whirlpool quality has deteriorated badly in the last two decades. I will never buy another Whirlpool kitchen appliance because of the dishwasher and new refrigerator experiences. When I searched the Internet for fixes for both appliances, I found many other owners having the same problems I have had.

I feel as though they could use some additional features, it’s also hard to change out some of the wiring in the back. I’ve had some issues with smells coming from the washers as well from them. Hopefully they can start to look into tweaking smaller details to improve the overall machine.

This set of washer and dryer are very simplistic and have few options. They came with the house I just purchased and I think they may be 10 or 12 years old. I cant wait to buy a new set... Very soon!!

Will never buy another Whirlpool/GE product again. Nothing but problems. Paid $1700 for a Whirlpool/goldstar refrigerator 2 years ago. Problems from the start with slide-out shelf cracking, evaporator fan burnt out within 2 years, digital display cannot read anymore. Now have another problem again - not cooling. Going to the trash. No wonder your stock price have dropped. I would sell off to. Whirlpool/GE have been going down hill for the last 5 years. Maybe more. Cheap products, do reflect, it just a matter of time, I would think you would address these issues in your product line, but it shows your company is all about profits instead of quality of products. Keep going like you are, and you will be bankrupt. Cheap overpriced and nothing but junk in any products you manufacture.

Whirlpool refrigerator Model type 14TFA seems to really keep things cold with good airflow in the freezer, and below shelves in bottom half are also keep cold adequately. Standard white appearance... somewhat boring.

Recently, I was having a problem with my Whirlpool gas range so I contacted the 1-800 number. Long story short, the repair cost was so high I would be better off getting a new range. But believe me, it will not be a Whirlpool.

We bought the Whirlpool Gold Stainless Steel dishwasher around 4 years ago and the pump and motor assembly went out. We spent top dollar on this dishwasher and should of lasted a lot longer. I’m no longer going to buy anything Whirlpool makes.

I chose Whirlpool first then my machine became of I wanted a front loading machine with a larger tub. I wanted to be able to wash anything without hesitation. I truly love my wash and dryer. This set is the first set I have ever bought brand new.

The machine is reliable, does not take forever to do a load, it is relatively quiet. It has sufficient options depending on the size of the load. Additional options are time setting, choice of warm, cold or warm/cold water settings. On light and medium loads it extracts almost all of the water; on heavier loads an extra dry spin does the job. In all the years that we have had it, it has required only one service call. The maintenance man told us that this model is the best in a series and he recommends that we hang on to it for as long as possible. We're very happy with it.

I recently had the bake sensor go bad on my Control Panel of our Whirlpool Gold AccuBake Oven with microwave. Not a problem correct? WRONG! While the Whirlpool people were very professional in helping me (a shout out to them), the part I received was the wrong color. It was white; they called it a biscuit color. My oven is black. I have no idea what Whirlpool actually calls that color. Anyway, in my visit with them, I was informed the black control panel has been discontinued. Am I the only person that has a black control panel? This $280.00 part is now going to cost approximately $3,000.00 to replace the entire unit. Is there anyone that can direct me to where I can find a black replacement control panel? Way to take care of your customers Whirlpool. Solve this and I will give you a great shout out.

A Whirlpool dishwasher was installed by Skyline, a modular home manufacturer, and we occupied the house on August 21, 2014. The appliance never worked and Whirlpool sent repairmen 9 times over 9 months to either repair or determine if it should be replaced. It washed the dishes exactly 4 times in that time. Complaining to Whirlpool only caused a supervisor to scream at my wife that we were the cause of the malfunction. Nearly every part was replaced & they still refused to exchange it for a replacement new one. The modular home manufacturer received the same treatment appealing for us.

I bought a 38 gal. low boy electric Whirlpool water heater from Lowe’s. It was replaced because of a leak around the upper heating element after only one year. Now, the replacement heater is leaking in the same place, and it has been leaking so long that the electric terminals are rusted, water is standing in the cover plate, and the lining is soaked. I cannot see behind the plate and dont know it until the water finally made its way into the drip pan beneath the heater. When we saw the standing water, we turned off the electricity and shut off the water to it to stop a fire hazard. The warranty is up on my water heater, but my concern is that this could cause someones home to burn.

My not yet 3yr old ($2100.00) Whirlpool refrigerator started having problems. I thought it was related to the ice maker. When the repairman came out, he said it had leaked the Freon, so I thought it should have been a simple fix. Boy was I wrong. It turns out it has a sealed system so no one can access this to fix it. It is now junk and I have to buy a new one. I will never purchase Whirlpool anything ever again and I will also tell anyone who will listen about my experience. My repairman said this happens all the time, and 7 or 8 yrs ago Whirlpool went from being one of the top models to being junk.

I chose based on the current ratings of the machines. They look nice and they can handle large loads. I think EPA has changed wash machines to be back into the 1920s. I put my clothes in and there is no agitator in the center. My clothes come out twisted tightly into little round circles or balls, not much water but now it takes over an hour to wash my clothes. So we are conserving water but using more power, I also have to iron sheets and clothes because they are so twisted and wrinkled. I used to stick my clothes into the washer, select a cycle and go on my way and now I have to answer 5 other selection options, if I dont hold the button in long enough it just turns off.Have we all lost our minds, I think this is going backwards not forwards. I have talked to other women and they agree with me, we HATE these new washer and dryers. The dryer is a little better but not much. Also the tops are concave so your laundry basket falls off, and you cant put your soap on the dryer which is where I am used to having it. Now I have to clean my washer every 30 cycles, iron and it takes all day to do the laundry, yes and they call this progress, really!!! I purchased the Whirlpool Cabrio W10607 425A- SP and dryers Whirlpool W10680129C-SP, these are full size and have the steam options on them and are side by sides.

We purchased the Whirlpool Cabrio washer a few months ago. When we wash the white cloths using the (white) setting and add bleach and the HE detergent, the washer does not clean the white cloths very good at all. Sometimes the white cloths come out looking worse than they did before they were put in the washer. We called the people at Whirlpool and they said there is nothing they can do as long as all the functions on the washer work the way they’re suppose to. I thought the function of the washer is to clean the clothes but, they say no, as long as everything on the washer is working. That is what their warranty covers.

We have had a Whirlpool dishwasher for about 2.5 years and have been happy with how it cleans dishes. About a year ago we replaced our counter top and in the process had to adjust the bend in the mountain brackets that attach the dishwasher to the underside of the counter. This requires flexing the thin piece of aluminum at the perforated line. In the process, one of the brackets snapped. The other was barely still intact and broke several months later. I tried jerry-rigging them, but eventually decided to replace them and called Whirlpool customer service to ask for replacement parts.Unfortunately, Whirlpool wanted to charge me $10.50 apiece and another $9.00 for shipping and handling. These parts could not cost more than a few cents apiece. I was shocked that they would charge me $30.00 to replace these flawed parts. Never have I had such and experience with any customer service department. The three people I spoke with were all rude and unapologetic about my situation. Two blamed it on the install...Ive installed plenty of dishwashers and never had any problems in the past. Even if it was a failure on my behalf, the simple replacement of the parts for a reasonable charge would have been fine by me. I told them Id be happy to pay a few dollars and to pay the full shipping fee (which was also high, in my opinion), but they refused to meet me halfway. I can only think that this is part of their business plan...make dishwashers with sub-par parts, and then over charge for the replacement parts when they fail. Well, I re-upped my jerry-rigging efforts and have improved the engineering of the faulty part. Save my $30. But Whirlpool will never again get my business and Ill be sure to steer clients and friends away from this brand as well.

Purchased Duet Washer and Dryer just over a year ago. Recently liquid detergent has been seeping into the tumbler and damaging clothes if theyre not removed immediately after wash in complete. The precision dispenser cartridge is the culprit in my opinion. Its suppose to dispense detergent as needed however it doesnt stop dispensing. Called Whirlpool and received no satisfaction. I would not recommend the Duet washer as a new purchase. I have to pay the price for Whirlpools experimental dispensing device and I dont think its fair. Its a flawed device and they should fix it.

I bought a Whirlpool refrigerator (model number model ised5lvaxwq00) about 14 months ago. The icemaker would not work when delivered. I had it fixed. Several months later, it quit working. It cost $200.00 to have it repaired. The ice door stopped working. I called Alabama Power to repair the icemaker. He advised that it would cost around $300.00 to repair. We are on a fixed income and cannot afford to have it repaired. On investigation, I found hundreds of complaints about the same issue with the icemaker flap. I would appreciate you trying to eliminate this problem.

When I grew up, my mom and dad had a Whirlpool dishwasher and it was the ONLY dishwasher we EVER had. The SAME one, for over 20 years! So, with confidence, I purchased a mid-range unit. (over $600 2015). By 2016, ONE year later, I was already buying replacement parts because the top rack was falling apart and the bottom spinner broke as well. The parts were extremely expensive and hard to find. Now, a mere 4 years later, you cannot find ANY parts for this machine and there are so many issues with the unit. It is no longer functioning. When it did work it ran for 4 HOURS!! Even then, the dishes are filthy. I am so upset by whirlpool. I want a full refund from the company for treating their loyal customer so badly.

I have a Whirlpool stove. Theres nothing but problems with the oven sensor. This is the 3rd time we have to replace it. It had problems ever since I bought and thats been 11 years ago. My Magic Chef lasted 13 years with no problems. I have a Whirlpool microwave that had a recall on it. Never buy Whirlpool!

I found this site while looking for a part number for the thermocouple. Lowes had one, but not for the FG model. I decided to call the number on here from Chris to see where I could buy the correct one with left-handed threads. I was told that they would sell me the conversion kit, but I couldnt get just the $8 thermocouple. Then $47.90 later and the conversion kit is on its way. Im not happy about it but at least I got 6 years out of my water heater before the thermocouple failed. The plus side is next time, I can get the $8 part from Lowes and not be without hot water for a week.

Purchased a new Whirlpool water heater from Lowes. Two days into the reset switch kept tripping, Whirlpool wanted me to wait for someone to repair it. Lowes exchanged it for me. When I called Whirlpool service myself, Jessie was in technical support could have careless about my business and was dismissive about any issues or concerns I was having. This will be my last Whirlpool product ever.

My landlord purchased a new Amana washer (NTW4605EW0) Labor Day weekend 2015. It started having issues in the spring, so we went through the process of utilizing the manufacturers warranty. Apparently, Amana, part of Whirlpool, requires 5 attempts at repairing the machines before replacing. Okay, so starting in June 2016, we arranged service appointments 5 times and replaced 1 part, then another, 4 times. Clearly, that part is defunct. Right? Fast forward to September and then into October. Get a new washer, and not the one I preferred. We got the Whirlpool WTW4816FW1. Before the installers leave, we are having the SAME issue. Stops midcycle, doesnt finish cycle, sometimes stops while filling, or while full, or kid wash, or mid drain... But now with the new washer, the drain and spin cycle thinks it should FILL instead of drain... and Whirlpool said they would get someone out the next day, a promise they cannot keep because they dont supply the repair guy, they source with local companies. So, the company ordered 3 parts... That could be the problem. And 4 days later, 2 parts are on freaking BACK ORDER. Parts arrive. All new parts replaced. Machine still doesnt work. Outlet tested by us and them and it is fine. The techs think there is some kind of RF interference. Turn off sensor light, which is on the same wall, unplug power to wifi router (which outdates the washer). Still, doesnt work.I have spent half my week, every week, since June, restarting my washer, unplugging the damn thing, waiting, and waiting, trying again and again and again to wash 2 loads of laundry a week... Literally takes a week until the damn thing does its job. Whirlpool is sent us a replacement washer. Can you guess what happened the first time we started it? SAME ISSUE. Cycle will not complete. Sometimes it dies before it even fills. Sometimes it dies while filling. Sometimes, it will fill and fill and drain and fill and fill and drain and... never stop filling. Or, the fun one, the drain and spin cycle thinks it is suppose to fill. Continuously. And then, suddenly, after unplugging it for 1 hr, or 24, or 72 hrs, it will work fine for 1-7 cycles. Nothing is consistent except that it doesnt work consistently. HAS ANYONE HAD THIS MUCH TROUBLE???

Such an expensive refrigerator but poor quality. Bought at Home Depot back in November of 2019. The bottom Freezer freezes up messing up everything only three months after purchase. I wouldn’t recommend it at all to anyone.

I bought this Whirlpool Cabrio Top Load Washing Machine in December and have hated it ever since. The energy efficiency this item claims means that you will spend a ridiculous amount of time waiting for your load to finish. My family hates this machine and I regularly have to hear about how long the load is taking because the timer adjusts continually. Put in a QUICK load and it said 38 minutes, came back in 30 and it said 24 minutes. It is so frustrating!!! We are afraid to put anything on a heavy soil setting or anything other than quick, because it can take 2-3 hours to complete. I have to schedule a day to wash my bedding and there isnt any convenience in doing a quick load. I am going to have to sell this one and purchase another washer. What a loss!! This machine has been a time and money waster! I will NEVER BUY WHIRLPOOL again!!! I bought this machine through Best Buy.

I bought a Whirlpool Gold refrigerator in 2010 from Lowes. Within months it had a Freon leak and Lowes had to replace it. I had bought the extended warranty. In 2011 a part had to be replaced twice due to excessive noise. Then the freezer got frost buildup on a coil in 2012 and again in 2014. I called Whirlpool and asked if they would pay for my next 3 year warranty. They said no, it was my responsibility after the first year. I would never buy a Whirlpool product . Do research, Whirlpool makes several brands.

I bought an electric hot water tank from Lowe’s less than 3 months. No hot water so I called Whirlpool. They give me service dept over 150 miles away. They will not come. I need hot water and need help. The hot water tank is half way in the attic and half in the closet.

Whirlpool Cabrio - This expensive machine should be called the Presidential. First it spins, spins, spins. It sprays tiny amounts of water, so little, that there is 2 inches or less. There isnt enough water to cover the clothes so no agitator to stir and mix them. There are ridges on the bottom of the tub called aggrivators to twist everything into pretzels. This twisting spreads the dirt around, but does NOT remove it, the utter lack of water giving it no where to go. I use a hose to add extra water, and I hand soap dirty spots. I stop the washer frequently to hand rub and slop the clothes around and un-twist them. Explain to me how running this machine 3 times plus adding water saves water and energy. I cant, in good conscience, sell this POS to someone else, and I cant afford something else. I sure miss my simple reliable old Maytag. I could say even more about this atrocity, but not now. I HATE THIS POS!

I purchased and had professionals install a Whirlpool 30-gallon water heater in 2007. Since that time I have had issues with the unit not staying lite, but have been able to deal with it myself. Then in November 2011, it wouldnt work. After paying a plumber to come out and check everything, we got on the phone with Whirlpool who goes through their generic checklist, and after all that they agreed the control was no good. They sent a replacement part out at which time I had to pay to have put in. Now, March 2012, the same thing is going on with the unit. Customer service is their same polite self and have to go through their checklist, but unfortunately we were cut off. This was followed by calls and trying to get the same operator, who was supposed to call me back. It didnt happen. I then called and was hung up on. Finally, I had to work with another operator who again wanted to go through her checklist! She finally agreed the same control unit must be bad and is sending me a new one so I can pay to have it installed! They will not admit the unit is bad and replace it completely. I guess when buying Whirlpool you need to understand they dont back their products. It appears to be normal that a control unit from Whirlpool only has a life expectancy of 3 or 4 months. Last Whirlpool I ever buy!

My ice maker and freezer on my Whirlpool WRF989SDAM00 refrigerator stopped working 3 days out of warranty. Repairs to run around $800. Is Whirlpool making disposable appliances? Theres a reason foreign appliances and electronics are bought in record numbers. Whirlpool is a disappointing Made in America product.

Purchased top loading Whirlpool Washer WTW5000DW0 10/12/2015 at Best Buys, first no agitator machine for us. Two weeks later I call for repair service because of the noise from tub. Explained in other reviews as earthquake or jet engines. The machine is in the garage and can be heard through the walls into the house. Repair tells this is normal for the machine and it must be our first none agitator machine.I then purchased a extended warranty policy through Whirlpool. 12/13/2016 machine no longer washing clothes. Call Whirlpool for service. Repair came out 01/17/2017 (a month later). Washer plate had to be replaced. The gear was completely shredded. Not in stock, waited 2 weeks to get repaired. Tension springs on outer tub replaced at same time. Was told the excessive grinding and bumping of the tub was not the reason for the gear shredding.06/30/2017 same problem, I set a repair date 07/01/2017 between 8:00 a.m. and 12:00 p.m. No one shows and no call. I call Whirlpool and they are sorry and set the appointment the same day for before 5:00 p.m. No one shows our calls. I call back. Already closed. I call the next day. Sets a new date 07/05/2017, 8:00 a.m. to 12:00 p.m. Same problem. I called back speak to a supervisor who says hell get to problem and find out whats wrong. Sets a new date 07/08/2017 8:00 to 12:00 p.m. 07/07/2017 I get a call after 5:00 p.m. that the repairman is not available and can we reset for 07/13/2017. I hung up and called back the next day and spoke to a supervisor I had previously spoke with. He called an outside repair company that Whirlpool uses in this area. New date 07/12/2017. Repairman shows and I explain the washer plate was loose again and I smelled metal burning. I had told my wife to continue to use the machine to wash the clothes. The repairman tells me I voided the warranty by doing this. Im standing in the garage while he has his head in the machine trying to get the washer plate out. He shuts the lid and turns the machine on wash/spin says the machine is ok. We have an exchange of words and tell him I want to see the washer plate gears. He says he cant get the plate out now and I wasnt there for him to show it to me. This continued until he forced the plate off. He called Tech Support to say I voided the warranty. He told them customer claims loud noises and banging. I asked to speak to Tech but he tells me they dont speak with the customer. I looked at the gears on the washer plate and the transmission. Both had metal shavings. He tells me he is going to do me a favor and replace both. Its supposed to take a week. Wait and see. I have asked for a replacement or money for the machine through Whirlpool. I was told there has to be at least 4 repair requests for the same problem and the repairman has to determine that there is a problem or that its a lemon. I will not recommend or purchase another Whirlpool product.

My wife and I made the unfortunate mistake of purchasing the Whirlpool Gold Series, model #WRF989SDAM00 refrigerator two years ago...yes TWO YEARS AGO! We have experienced numerous issues with the appliance but our latest (no cold air in both the fridge and freezer) prompted a call to a service center. The serviceman that showed up knew immediately what the issue was, our compressor and evaporator had malfunctioned and according to him, We have seen the same problem in a number of these models and that Whirlpool has since redesigned the casing to prevent this issue in new models. What about those of us who purchased the previous model?! Now shame on us I guess for not purchasing the extended warranty...I suppose I just took it for granted that in todays competitive manufacturing world Whirlpool would be committed to building a quality product! Because of this I was offered two options from Whirlpool. #1 - pay for the parts yourself...over $800 or #2 - purchase their 1 year warranty program @ $350/year, this warranty will cover all parts and labor for an entire year. Based on my experiences though, I will need to purchase a 1 year warranty @ $350/year for the life of this lemon, potentially costing me $5500 over a 10 year period. I ultimately took option 3...tossed the piece of junk and bought a new fridge from their competition. Dont be fooled by the attractive design and appearance, the Whirlpool Gold Series refrigerator is a money pit waiting to happen!

In 2008, we also bought a Whirlpool 40 gallon gas hot water heater with flame lock, Model #BFG14040T3NOV. We too purchased from Lowes. The plumber was here yesterday to replace the thermostat for the third time in 4 years. We also suffered through cold showers, warming water for dishes and sponge baths. We are in our 60s and are worn out arguing with these people. If there should be a class action law suit, you can count us in. It is not right to have such a faulty product out there by Whirlpool. This is still America, right?

My new Whirlpool Stove, has two grill like tops, heavy duty and awesome looking. It has a special burner to keep food warm, a stainless steel front and bottom drawer for broiler storage. Broiler is also on top in oven, broiler flame.

My Cabrio washing machine is a hunk of scrap metal after five years of lite use. Replaced the electronics first, then a year or so later replaced the motor. Now its leaking from the bottom. Repair man said it is not fixable. I did not buy a warranty because it was too expensive compared to the value of the washing machine. My recommendation to anyone buying a Whirlpool appliance is to buy the cheapest thing on the market, so that you can throw it away when it breaks because they are made to break so that they can sell you extended warranties.

We bought our stainless and black Whirlpool stove last month. We love that its black topped, and doesnt show dirt. We love how the oven door seals, and the fast heat. What we do NOT love, is how easily the knobs turn. You barely brush against them, and gas leaking into the kitchen. I called for service. Our guy said yes, they turn easier than most of the stoves he has worked on. He called tech support from my kitchen, and I overheard the guy at the other end. His response was dismissive. I have had gas ovens for 20 years. They have without exception, had a spring type feeling to the knob. This stove has none. I am writing this so that if others are experiencing the same thing, they will see it is not their imagination. Something is wrong with the design of the knobs or some part is missing.

19 gallon Electric Whirlpool water heater Model #e1f20us015v - Purchased this water heater from Lowes to provide hot water to small apartment with no kitchen for my son, built in my garage. Had unit professionally installed within 1 foot of bath to provide hot water for shower and sink in bath only. Hot water lasts only 5 to 6 minutes and takes approx. 2 hours to recover. My son cannot even take a normal shower! ntacted Lowes who was unable to help and told me to contact Whirlpool. Contacted Whirlpool after my model number would not even come up on their website. I asked tech what was the normal expected amount of time before hot water depleted. She did not know. I asked what was the normal recovery rate. She did not know. I asked for information on the energy rating. She said there was no information available. I asked how I could receive a refund. She said that they could only send a plumber to check unit and that nothing would be done if it was heating water. I asked to speak with a supervisor. She said none were available and said one would call me. I never received a return call. VERY DISSATISFIED with Whirlpool on this issue. It appears my only recourse is to purchase a new water heater and scrap the present one.

I paid for an extended warranty. Dishwasher not functioning properly- it stops mid-cycle. Had a tech out twice who insisted nothing was wrong. Extended Warranty customer service refused to honor my claim. Will never buy another Whirlpool product again. And buy an extended warranty! SAVE YOUR MONEY!

First of all, Whirlpool is fully aware of the problems with water heaters and intentionally places requirements on the consumer until they give up. This info from a distributor. I bought 30 gal. gas water heater 7 months ago. Six days ago the pilot light went out. Went to Lowes (purchased there) and bought a replacement. Wrong one. Returned to store and was told they dont stock repair parts, call factory. Monday called warranty number. They offers to send thermopile, it would arrive in 5 days. I paid $30 for overnight. Plumber installed new part. Still doesnt work. Whirlpool says have the plumber call them theyll walk him through troubleshooting. I ask, Whos paying the plumber? They reply, You are. Plumber calls Whirlpool. They tell him to clean the screen. He does. They tell him to disassemble the burner. I stop plumber. I ask Whirlpool, What if its not the burner? They reply, Then well troubleshoot something else. Meanwhile Im 5 days without hot water. I go to Lowes where heater was purchased. The manager thought it funny Im another victim. I ask, Why doesnt Lowes stock heater parts? He says because Whirlpool doesnt let them carry parts. Im beat. I surrender. Parts from Whirlpool would take another 5 days and theres no assurance itll work. Lowes refuses to assist.I go to Sutherlands and buy a $450 Rheem on recommendation from plumber. Manager from Sutherlands hears my sad story and writes on receipt: Any warranty failure and Sutherlands will replace water heater free. He signs his name on receipt. I pay plumber to swap out heaters. Anybody want a 7 month old Whirlpool water heater. Like new. Cheap! By the way... I originally went to a major appliance parts store asking for a thermocouple for a Whirlpool. The three guys at the counter started laughing Hey we got another one looking for Whirlpool parts. They didnt have them either. Lesson learned.

The exterior look of the refrigerator (WRX735SDBM00) is impressive and the stainless steel does not show finger prints easily. It has two french doors on top, a middle drawer, and the freezer drawer on the bottom. The interior is 25 cf, but there isnt much space, even with reconfiguring the shelves, and the crisper/meat drawers are so small, that a large bell pepper wont fit. When one French door is closed it pops open the other door, which then does not close back tightly. Although there is an alarm system to warn a door is open, it only works if the doors are open and not just cracked. We have to constantly push on both doors to be sure they are closed tightly, even after washing down the gasket to get a better seal.

I purchased the front load washer 4 years ago and the board went bad in 2 years. It costs more to fix it than the washer is worth. Stupidly, I purchased the top loading Cabrio and it has gone downhill from there. Has always sounded like a jet taking off in the spin cycle. Then 18 months into the purchase, it started with grinding noises and load balance issues on the spin cycle. Seems like they have a lot of issues with these Cabrios. Spent a lot of money for nothing. I will never buy a Whirlpool again!!!

I purchases a Whirlpool 32 Cubic foot 3 door refrigerator in stainless model WRF992FIFM back on November 29, 2016 from Costco. I noticed that it was not making ice and that the refrigerator was around 50 degrees. This was on October 21, 2017. I called Costco and they contacted Whirlpool who sent out a service person on October 25. I am still without a working refrigerator and it is November 9, 2017 as I am told that a circuit board needs to be located.I have called both Costco and Whirlpool and no one seems to be worried about it. I was told by Whirlpool that if a part is not available by end of day Friday November 10 that I will be considered for a replacement. Considered really? I have never experienced such deplorable customer service on both Costco and Whirlpools part. It appears that this model is a lemon as there are large numbers of complaints on numerous websites. I asked for a refund due to the bad reviews and lack of parts and was denied. I will call on Friday for an update.

I had sold appliance for ten years. I purchase a Whirlpool Cabrio 2010. After two years started rusting. It is rusting on the outside and now on the inside, that I cannot wash delicates or whites. I so disappointed. I had lots of confidence in Whirlpool. The model is wtw7300xwo... I call talk to whirlpool but got no help. Now I going to need to purchase a new washer. It will not be a Whirlpool.

I agree with the person who said they would rate it no stars, because this washing machine model (Whirlpool Cabrio Model No. WTW8500DC4) does not deserve one. It truly does need to go back to the engineering department. This washing machine is a replacement for another Cabrio! Short story on the first one: Installed on February 2, 2017. October 5, 2017, machine would not go. Then began a series of waiting for repair people, parts, etc. I think it was a total of four trips -- the first one to inspect, three to install parts, the last one being where the repairman took the machine totally apart in the laundry room and was here for several hours. Still would not work. On November 29, 2017 (almost two months later!), Whirlpool had one delivered by JB Hunt. Well, that wasnt so short.This complaint is on the replacement machine. Installed on November 29, 2017. On February 3, 2017, washer said it was done. Well, it wasnt! Clothes were sopping wet, had not been spun, and the fabric softener had not released meaning, I guess, that they had not been through the rinse cycle. It gets better! Tried to start it on a short wash, meaning not very dirty as that is the only way to shorten the cycle. The timer showed 40-something minutes, then went to 1:36 minutes, then to 1:42. Turned it off, unplugged, let sit 15-20 minutes. Plugged in, started it back up. It went crazy! Water was pouring in the machine, then I heard a noise, looked to see what it was -- it was water coming out the bottom of the machine. Husband turned off the water spigots, didnt stop the water. I unplugged the thing from the wall; water did stop.Water was in the laundry room, the pantry, the kitchen! Thankfully I was standing there to see what it was doing or it could have been really bad. This time I took photos and video of this thing. Technician is coming Wednesday. Well see, wont we? Do not want another Cabrio, but what do you do if, like most people with new washer/dryers, you want a matched set?

Water heater failed to maintain temperature. ** heads (more than 2) sent out by Whirlpool couldnt fix it! Calling the company was a waste of time! They run you in circles. Will never waste my money on a Whirlpool product again!!!! This was not my first problem with this company, but it is my last!

They will not honor the extended warranty on their fridge which Ive had for less than three years which will not defrost making me lose thousands in spoiled food. Extended warranties are contracts and this company should be penalized and shut down for fraud.

I am not satisfied with your customer service, as my microwave is not working from last 4 or 5 months but no one cares for it. I did complain again and again but your engineers do not have the skill to solve customers problem, then why you say that you are a number 1 company in the world. From my point of view if someone will ask me for you to provide service, I will never recommend you.

Whirpool Part #WPW10564292 refrigerator handle - I am a property manager who has 264 units. We have only been open for 1.5 years and have had to replace 30-40 door handles because they crack at the top where screws are. We tried calling Whirlpool Customer Service because obviously this is a defect and she said they looked in the system and didnt see any recall or issues. We also asked for a representative from Whirlpool to stop out so we could show them the issues and she said we have nobody in the area. We have 9 service requests outstanding that need a new refrigerator handle. On July 19th, we ordered 3 handles from our distributor and we were told theyre on back order until September 6th. When I called at the end of August to make sure we were on schedule with delivery, I was informed they are now on back order until November 5th. I just called our part rep. this morning and now they said the current part number does not exists and gave me the new part # W11026870, and they are on back order until mid or end of November. I am not going to keep quiet about this issue. We have paid $79.89 per handle on a refrigerator that is only a 1 to 2 years old appliance. I am requesting a returned call or email on what you are going to be able to do for us. This is not right or fair to a company that spent a large amount of money to have your appliances in 264 units.

I purchased a Whirlpool cabrio mod. wtw5840bwo washing machine in Oct. of 2014. As of June 2015 I am ready to kick it to the curb. The washer works to it design and hasnt broke down but it doesnt clean our clothes. We load the machine, add the right amount of clothes and recommended detergents and 1hr later after the wash cycle is completed, the clothes still stink with the smell of daily perspiration. I went back to using our old washer that has a worn out agitator. It does a better job.

Having spent over RS 40000 on a so-called quality product one does not expect to spend nearly 20000 within the first two years of the purchase. 1. As soon as the warranty got over the PCB (costing 3000) broke down. 2. This replacement had a 3 MONTH warranty. Exactly after 9 months again the PCB breaks down along with leakage of gas. The service team asks us to buy a stabilizer to ensure that no such issues occur as they attribute these breakdowns to voltage fluctuations which are not of any precedence in Delhi. Also the product I am using was sold to me as a stabilizer-free working. 3. I made the suggested investments 4 months later the fan and motor of the freezer stop working. Imagine so much repair work on a new equipment. I have been writing to them yet all that they say in response is we are looking into the matter. NO ONE SHOULD BUY WHIRLPOOL REFRIGERATORS.

After having my Whirlpool side by side refrigerator ice maker replaced 4 TIMES in 10 years, I finally found a permanent fix for it: an Igloo counter top ice maker for around half the price of a replacement Whirlpool ice maker. Unlike the Whirlpool ice maker, it makes ice. I promptly removed the Whirlpool ice maker FOR THE LAST TIME, and sent it to the dump, where it belongs. Goodbye Whirlpool! If that is the best you can produce, you will not receive any more of my hard earned money!

Purchased my Whirlpool WRF989SDAH00 White Ice fridge late September of 2014, received the fridge Early October, todays date is Dec 17, 2015. The freezer is not freezing food properly the last couple of days, all food is unfrozen in the freezer. Have lowered the temp settings has not helped, the fridge section is temperately fine. There is a noise coming from the fridge that sounds like a noisy fan or motor. Phoned Whirlpool Canada, they said they could send someone out. They will charge $100 for call out and over $20/15 min after. I asked whod theyd be calling to service. Said that Id try unplugging the fridge for a couple of days and seeing if that helps, and that Ill call the refrigeration company myself if I need them. Not satisfied with their short term warranties. Especially on such expensive products.

I bought a new Whirlpool electric range in the spring of 2008 and purchased the extended warranty from Leons. The oven worked fine for the first three & 1/2 years, but then the bottom element in the oven seemed to have stopped working. The top element would still come on, in an effort to keep the oven at temperature, but was not effective.I called in a repair. The technician showed up, turned the oven on, noted that the bottom element did not come on properly & replaced the motherboard in the control panel with no further diagnosis. The oven worked for approximately 9 months and then the problem recurred. I called in another warranty repair. This time when the technician showed up, he turned the oven on & told me he was going to order a new bottom element, which he installed about a week later, again, with no further diagnosis.Now, here we are again, one month off warranty and 6 mos since the last repair, and again, the bottom element in the oven is not working correctly. I reported the issue & my dissatisfaction to Whirlpool and was basically told, How sad, too bad - hardware components fail and theres nothing we are going to do about it. Seriously? This range is just barely 5 years old and has a history of repeated problems with the bake function - obviously, something is defective in this product.I can see it, if I had not had any problems until this point, but when the same issue keeps coming up & obviously has not been correctly diagnosed and repaired, I would think they would have enough integrity to offer some kind of help or solution. Given the history here, its highly unlikely that Im going to be willing to spend big bucks on another attempted repair that, in all likelihood, will be merely a short term band-aid, so Ill probably have to buy another new range - which I cant really afford right now. Trust me, it will not be a Whirlpool & it will not be from Leons.

I purchased my Whirlpool microwave model WMH2175XVS-2 in March 2011. The magnetron went bad 3 years and 1 month later. Thats only 37 months! Whirlpool is very sorry but of course the warranty is expired! Oh by the way, I replaced a microwave that lasted 10 Years which was a second microwave (which is still going after 15 years).