I purchased a Whirlpool dishwasher and have had it repaired four times so far. Last time they replaced the main computer located in the door. I attempted to use the dishwasher tonight and it is completely dead once again. I usually have had good luck whirlpool appliances. After all these problems will no longer be using this brand. I contacted the store where I bought it from, Famous Tate. The first time it stopped working just a month after the manufacturers warranty ran out and they were absolutely no help. So in the future, I will no longer buy any type of Whirlpool appliances.

The AquaLift self clean is a joke! Doesnt clean at all! Has to be consumer fraud, calling it a self clean. Ive owned electric self clean ranges for 40 years, that did great jobs. This does zip for cleaning! Unbelievable! Should be a rating below 1 star!

Purchased in January of 2014: Brand new Whirlpool WOS51EC7AS01 model oven - interior bottom metal has buckled causing the enamel to crack and break off from oven bottom. I registered all my new appliances immediately for warranty. When this happened after the fourth or fifth time baking in the oven, I called Whirlpool to get a service person to look at it. First person Whirlpool scheduled to come out refused to even come out, without looking at my oven. He said he knew we did something wrong? They immediately set up a second service person, after two weeks waiting for an answer; I had to call him (twice). He said that his report and pictures sent into Whirlpool shows normal use and there is nothing wrong with our oven? So, Whirlpool will do nothing to repair the oven? We just spent almost $4,000.00 on all new Whirlpool appliances, and this is how we get treated? WOW! Never again will I ever purchase a Whirlpool product. The enamel is gone in spots from our oven floor. How long do they think that will last with no protective coating on the oven? Terrible customer service.

We purchased a top loader Whirlpool Cabrio Platinum Washer and within a few short months noticed a mildew-like smell emanating from it. This is DESPITE the fact that we leave the top up the entire time that the machine is not in use, we use hydrogen peroxide and ammonia in our loads of laundry in order to kill any mold present and my husband painstakingly hand dries the interior of the drum after each load of laundry. He also puts hydrogen peroxide in the fabric softener dispenser in an effort to kill the mold/mildew. None of this has helped to mitigate the ongoing mildew/mold odor. We have run across other online reviews which suggest that the Cabrio does not fully drain the water in the washer leading to the potential for the development of mold and mildew. This is very upsetting as we paid a lot of money for the Cabrio and had high hopes for it.

I was excited to have an energy efficient washing machine and chose the Whirlpool Cabrio top loader. I truly wish I had read reviews rather than trust the salespersons advice. It does not clean clothes properly at all. They come out smelling dirty and are covered in white goo, even when the machine has just been cleaned. Stains never come out despite all of my efforts. Now I have water leaking out of the bottom as it fills. Not impressed at all. What a giant waste of money.

Whirlpool White Ice gas range with aqualift technology. Whirlpool uses a self-cleaning technology called AquaLift to clean the oven. It does not work. It does not clean the oven no matter how many times you run the cycle. I have contacted Whirlpool 3 times and they did respond. They first suggested buying their oven cleaner. I purchased the oven cleaner and it did not work! They then said that aqualift will only clean the bottom of the oven (it does not). Who buys a brand new oven that does not have a self-cleaning feature? I read reviews online prior to buying this oven and unfortunately for me, there were no bad reviews. However, I just checked again and there are numerous reviews stating that aqualift technology did not work for them either. This oven bakes but it does not clean and Whirlpool will tell you not to use oven cleaners in your gas oven because they will damage the surface of the oven. I currently have a very dirty oven and no effective way to clean it! Do not buy this oven if you want a self-cleaning oven. This oven should be recalled and money refunded. I would never knowingly buy an oven that does not self-clean. This Whirlpool with Aqualift is not effective and the company had to test this before it was marketed. I do not know which brands to recommend at this point as I am stuck with a Whirlpool gas oven that does not self-clean. The oven is only 1.5 years old so I will be stuck with this oven for a few years. Do extensive research before you buy any appliance.

We purchased the washing machine on February 2, 2013 and initially noticed that some of the clothes were still dry when the complete load was over. Meaning that I am not saving water cost because I then have to rewash the clothes and pre-scrub the clothes. Then a little over a year later, the machine is making this extremely loud piercing noise when spinning. The cost to replace the part is $250.00+ the repairmans fee. Whirlpool says there is nothing they will do. From reading the other reviews, this is really sad because of the numerous people having the same issueS with a capital S. I definitely would support a class action suit.

I have a portable dishwasher. It does not dry the dishes when cycle is completed. I have to either leave the door open or take them out and towel dry them.

Its a very good one, it kept my stuff cold, and fresh when my other fridge went on the Fritz, but only one problem, and that is, it has glass shelves and if you have kids, it’s hard to keep clean!

I had a kitchen fire in 1999. All appliances were replaced with Stainless Steel Whirlpool. My old fridge was an 18 y.o. Whirlpool and still works fine in the garage. My old above range microwave was 12 y.o. and worked fine, I should have kept it. I had to replace my new Whirlpool Microwave after 4 years and 4 repairs. (Main Power Diode kept failing). Now my Whirlpool Gold fridge is not defrosting, even the freezer light switch is frozen. This French door freezer also seems to have less capacity than my old upright freezer. The retailer seemed sympathetic and pathetic. They would not budge on repairs. I told the contractor that did the rehab on my house what happened, he said he would stay away from Whirlpool and that retailer.

This company has terrible, deceitful, and pass the buck practices. I purchased a Bravos MCT top loading Maytag washer from Home Depot. Maytag is now owned by or has been acquired by Whirlpool. First I was a little disappointed to learn that because I had previously purchased two Whirlpool made washers and got no more than six years of service out of both them. But from the day this washer was delivered it did not perform as it should. I called and texted with the hours provided for rejection of the washer and was told by a customer service representative that it would be replaced. The main problem was the spin cycle. With only a few clothes in it, it jumped all around and moved so much that it was sitting in the middle of the washroom. Thinking that occurrence was a one time thing, I stopped it; cancelled the cycle; and reset it. It finished the load. This occurrence was reported and simply fell on deaf ears. I was lied to and told a replacement would be made; it was not. I have sent numerous emails and have made several calls for more than a year now and I still have the same defective washer in my home. Each time I emailed, I received a different message from the customer service person. This company wants me to pay for a service call or buy an additional warranty for a defective machine they produced and refuse to honor their replacement policy— which they now say is the responsibility of Home Depot. Luckily I have kept every email and document I was provided. I am being forced to file a claim against this company to get their attention and to remedy this situation. The expense of the claim will be greater the cost of purchasing another machine, but it is this kind of behavior, on the part of A corporate giant, that is makes life tough for everyday people like me. Stay away from the Whirlpool name for washers—even a prior good name brand like Maytag.

Three years ago I bought a Whirlpool 22 cf bottom freezer (GB2FHDXWB02) & within 2 weeks it developed its first problem. Ive had service men out 3 times (on an extended warranty) for ice buildup and leakage, presumably from the icemaker, and the problem hasnt been solved yet. I tried to open the freezer tonight and the handle pulled off in my hands, nearly sending me head over heels. This thing is a major lemon!!! Dont get me wrong: I love the design! It looks good, keeps everything at the right temps & the bottom freezer is a great idea. Id buy the same design again if I could guarantee no leakage and a handle that wont separate from the door. Now Im having problems getting the repair service to come out here again, despite the warranty. Meanwhile, the fridge is leaking onto the wood laminate floor causing damage. I just replaced an ancient dishwasher & my old Whirlpool glasstop stove after its oven failed. I cant afford a new fridge too.

Ever since I purchased your washing machine, it has sounded like a diesel truck or cement mixer. You cant hear anything over the noise anywhere in the house.Have had two repairmen out to look at it and they say, Thats normal. I have a friend who has the same machine and it doesnt make noise like this one. I will never buy another Whirlpool product again and hope this blows up before the warranty expires. Also the tub is falling apart. What a piece of ** this machine is. You should be ashamed to put trash like that on the market.

I purchased the Front-Loader Duet in June of 2008. Like many of the consumers here, my machine began making a thunderous sound during the spin cycle. I contacted Whirlpool and arranged for service. The service call was $129, the estimate was over $1100 to repair (bad bearing). The machine originally cost $899 plus tax. I called customer service to complain. I had owned two top-loader Whirlpool machines; one for 15 years, the other for 12 years with no service calls ever needed. How can Whirlpool possibly justify what is obviously a design defect by telling me that I should have bought an extended warranty? I replied that in my experience, an extended warranty is an unnecessary expense for a Whirlpool product.

Whirlpool top loader washing machine Model CAE2743BQ0 - Highly regret buying this washing machine. It was expensive and it doesnt actually wash clothes. Clothes come out with streaks of dirt and detergent since the machine barely has an agitator and whats worse it doesnt load enough water. I called Sears for repair three times and the technicians say thats the way this machine is. Its terrible! So frustrating. Since we were over the 30 day return period when we noticed the issue wasnt going away, Sears wont do anything. DO NOT BUY THIS MACHINE!

The self cleaning work very well. All you need is clean the filter every time you use the dryer. I had the large capacity. I can wash my blankets and heavy clothes like commercial machine and the machine is programmable for your wash load.

When purchasing a new home, the almost new Whirlpool double-door ice-dispensing stainless steel refrigerator came with the kitchen. This beautiful-looking fridge worked well for close to three years, but gave up the ghost shortly after its warranty expired; designed obsolescence perhaps? Problem was, it would have cost almost as much to repair as it would have to purchase a new fridge with a warranty. So, thats what I did, via a local big-box store. I bought a single door floor model, with the Whirlpool ending up as scrap, the whole incident leaving a bad taste in my mouth. If you have your grandmothers old fridge that still runs, keep it!

I purchased it in 2011 for $1100 Canadian. Smooth glass top and true convection. The controls were easy to use, and understand. What bothered me was that it stopped working just after the warranty ran out. I did my research, and found that the newer ranges that have the controls on top at the back have issues with the motherboard overheating, and causing this problem. I did speak to Whirlpool customer service, and managed to convince them to supply the replacement part at no cost. I paid my local dealer to install it. This repair lasted for just over 1 year. Same problem again.This time I could not convince Whirlpool to supply the part. FYI The part in question is the controller. Essentially a motherboard. All the controls are operated through this small computer. It is the only replacement part that costs over $100. Last I checked it was around $450 Canadian. The reason for the fault is overheating. According to the tech that fixed it the first time, it is the most common problem with this style of range. I find this concerning considering the only thing a range does is create heat!Keep in mind that you are virtually held over a barrel. There are only two companies that market their products under multiple names adding up to over 80% of the appliances on the market. They battle for that market by offering more bells and whistles, and less quality. The Range I replaced four years ago was 20 years old. I just replaced my Whirlpool 3 months ago. I went outside of the 80%, and bought a Samsung. Im rolling the dice, and went with induction top. My theory is it will produce less heat because it just heats the pot, not the stove top.Low quality drives me nuts. I want fewer bells and whistles, and more long lasting reliability. I should be able to go my lifetime and only buy two or three ranges. We really like the induction top. It works fast, and doesnt produce too much excess heat. Dual zone oven is a good idea. We werent looking for it, but there was a deal on. The dual zone induction range was only $50 more than the regular one beside it. Now my wife uses it all the time. She will have cookies in one zone, and a casserole for supper in the other. True convection is the other must have. It does a great job cooking everything evenly.

Whirlpool Cabrio Platinum Washer - I have a 2 1/2 year old washer that has been serviced twice. This week 10/2/14 the service technician informed me that we had a bad tub bearing. The bearing failure caused a leak which corroded the rotor & stator. It was more cost effective to buy a new washer than to repair our unit!!!! Ive never heard of a washing machine needing to be totally replaced after 2 1/2 years. Any ideas how to deal with Whirlpool?

Just like hundreds (maybe thousands?) of others who have had the same part failure causing the refrigerator to leak, I had it and was told by my very honest, highly reputable repairman (not the one KA recommended!) that it was a DEFECT. I bought a French Door style #4609730. First, I complained on Twitter and the Social Media folks gave me the runaround. I kept it up and then, filed a complain with the Better Biz Bureau. They sent the complaint to Whirlpool, who owns KA. They gave me the runaround too - UNTIL I TOLD THEM HOW MY LOCAL TV NEWS station was interested in my story (true, I went to them too). CORPORATIONS SHOULD NOT GET AWAY WITH DIRTY BIZ TACTICS!

Takes 2 or 3 full cycles to dry small load. Big disappointment, drying is such a horrible experience since the clothes never dry when I expect them to. Not satisfied at all.

My NEW Machine Top loader HUGE drum. Have problems with clothes not looking like they’ve even been washed, Spun so hard they are twisted all to heck. And white stuff - my oxy powder maybe? Not dissolved. My old machine was a Kenmore 30 yrs old. Thought I’d be able to trust whirlpool but not sure. Am I missing something in the loading process. Seems to read something bout not Covering the knob on the bottom. Is this true?

I purchased a 50 Gal. Whirlpool gas water heater on Saturday, 12/31 to replace a 20-yr old unit that had failed. The unit was installed that day and it started right up but I noticed the burner had gone out about an hour later and the status light indicated FV Sensor Lockout. I tried calling Whirlpool but their customer service was closed. I tried troubleshooting myself using manuals and Internet forums without success. Everything I could find indicated that an FV Sensor failure could not be repaired and would require replacement parts. I called Lowes and was told they could not help me and I would need to talk to Whirlpool.I called Whirlpool again Sunday, 1/1, but they were closed again for the Holiday. I called two plumbers and both told me that the Whirlpool units were problematic and that if they did come out, there would be little they could do except charge me a lot of money and recommend parts to order as Whirlpool does not let them stock parts. Both plumbers also suggested that I consider buying another brand.So I went to Home Depot and purchased another brand with similar specs. I installed it that day and it fired up right away and has been running fine ever since.I talked to Whirlpool on Monday, 1/2, and they told me they would not issue an RMA for a unit that they considered usable. They also told me there was an FV Sensor reset procedure that they would have walked me through had I been able to talk to them that would have bypassed the sensor until a replacement could be installed. I told them that if they would publish this procedure in their manuals or on the Internet, I would have certainly done that. Im now fighting with both Whirlpool and Lowes to get a resolution to this problem. Im not sure about other Whirlpool products but their Water heaters seem to be very problematic.

You Have Been Warned! Do Not Buy A Whirlpool. We bought this Whirlpool washer from Lowes. It is a top loader without the agitator in it. The sales pitch was very good. One of the best washers on the market. It was less than 1 year old when it started getting out of balance. We would stop it and rearrange the clothes and start it back up. Over a few months it just got worse. Now, it will scare you when it gets out of balance. You cant set within 5 of it or it will run you over when it jumps, but you have to set close enough monitoring it or it will run out the door of the utility room after you. Now, I find out the Maytag has bought Whirlpool Corp. Not a good move for them. Whirlpool has mess its own name up, why would Maytag want any part of it? I dont think I will trust Maytag anymore either for fear it may be a Whirlpool.

The 2 rear steel rack supports were flaming/sparking. I was told by Whirlpool over the phone that this might have been a recalled item, but they would send a technician to check. The technician said it was a build-up of grease and that I should not have used the rack and not to use the rack at all in the future. However, I do not use the microwave often enough to get a build-up of grease and it is cleaned thoroughly. This is a Whirlpool-manufactured product. Why would it be unsafe and why can I not ever use the rack again? If this was a hazard, why has it not been recalled?The technician removed the rack and sprayed a white substance on the support, and I was charged $138.03 for this and left with a partially, unusable appliance. I would like this to be replaced, so that I can use 100% of my microwave or be reimbursed for this expense. Please explain. Thank you.

I count myself as lucky... my Whirlpool 465 Accubake Ceramic Cooktop stove was given to me. I have used it for 3 years. One day, out of the blue, the oven, which was in use, started clanging loud and jumping up and down. I started screaming & tried to cut it off & it would not go off. I ran to the panel box & threw the breaker. It also burned my food that was cooking. It did it several times. Then I decided to not cut the light on or touch the button to raise the temp. It has not done it since. I bake everything on 350 degrees and immediately throw the breaker. I am scared of this stove and plan to replace it. I will NOT buy a Whirlpool, anything. (washer/dryer/fridge/aircon)....once bitten...

There is a melted hole in my Whirlpool microwave. The model WMH53520CS is on the recall list for this but not my serial number. Other have posted this and theirs was not covered. This should never happen. I have never had a microwave do this. If I have to replace it I won’t buy Whirlpool ever again.

I bought this Whirlpool Cabrio Washer 3 years ago. Yesterday will be my last repair. I installed a new tub (bearing failed have to buy a full tub to replace), new suspension rods and a new stator and rotor (cracked). Last year I replaced a drain pump twice, and a computer board. All of these repairs since I purchased this washer have cost me well over $900 for a $1400 machine. I dont mind replacing a pump every few years but these larger failures are unacceptable. We have moved back to Kenmore on some new appliances we purchased this year as result of trouble with Whirlpool. Whirlpool should send out a recall on the suspension rods; the existing ones seize at the top and stop functioning causing the tub to shake excessively. This led to the cracked motor (rotor cracked).

Do not purchase Whirlpool smart freestanding gas range model number WFG975HOHV. I purchased the range and the refrigerator around Christmas of 2018. The first time I turned the oven on to make Christmas dinner the carbon monoxide detector alarm went off. I have tried to use the oven twice after that and the same thing happened. The oven also never gets to 350. I spoke to Whirlpool who said to unplug the oven. They stated a technician would be sent with a carbon monoxide detector and to conduct repairs. The technician came and could not get the oven to 350 and the carbon monoxide detector alarmed. He stated he has to order parts and return to complete repairs.This is a brand new oven that I could not use because the carbon monoxide alarmed and the oven was not heating to 350 because it keeps restarting every few minutes. So here I am not able to use the oven for over a month and waiting for parts for a brand new range. Do not waste your money on Whirlpool products. Also the customer service has no empathy knowing their products are defective.

I have had my Whirlpool Washer for many years. It agitates well and my clothes are always clean. They are easy to dry. The wringer wrings out all the water, yet they stay damp for ironing. You will love this machine. I am happy with it and hope it lives for a very long time.

Recently, I was having a problem with my Whirlpool gas range so I contacted the 1-800 number. Long story short, the repair cost was so high I would be better off getting a new range. But believe me, it will not be a Whirlpool.

Bought a whirlpool refrigerator in 2015, have had both handles replaced 3 times, the bottom pieces of the handles are made of plastic and they crack. We had to take them to a metal fabricator and have them replaced with metal to keep them from breaking. Lowes and whirlpool know of this problem and they do nothing about it. Will not buy another whirlpool product. Very dissatisfied.

We purchased a Whirlpool Estate Range in 2008, with an extended warranty. We have only moved this range out 2 times since it was installed and the last time was over 2 years ago. This range worked beautifully, no issues whatsoever. Until... tonight, the oven & one burner were being used when suddenly the range started arcing, which blew a hole through the back panel on the stove where the cord hooks to it. It continued to arc and quickly fill the kitchen with black smoke until we could reach the breaker box. The Whirlpool repairman wants to charge $88 dollars just to tell us WHY it happened. After 2 years of sitting in the same spot, why? I dont want the stove repaired, I want it out of my house! I will not take the chance that this will happen again when we are not home. When asked if this was an issue with their product, the repairman answered, I have never heard of anything like this before. After reading these reviews: Such a Liar! I wouldnt believe anything Whirlpool, or their representatives told me about their products now. I just want their crap out of my house and I will never spend another one of my hard-earned dollars with them again. Too many other choices out there. I just want other buyers to Beware of Whirlpool.

Bought this refrigerator in 2018 and ice maker went out 2x, then compressor went out and waited 4 weeks for part. Now the refrigerator is broken again and not cooling. Dozens of other reviews indicate the same issue with this model. It’s clearly a defective model. Customer service in Tennessee are very friendly but my refrigerator is still not working. Whirlpool French door - wrf954cihm.

The main control panel on my Whirlpool Cabrio Washing Machine broke twice in the second year of ownership. I bought this in 2006. The part was replaced in March 2007 and then again in October 2007. Now, it is broken again and Whirlpool says too bad, they will not replace it again and will cost us $275 to fix it. People have posted about this problem all over the internet. How can they not help their customers and recall this washer part?

Worst appliance of any kind that I have ever used. Has only on/off button, in effect. Wastes water. There is no option to change anything once cycle has begun. No soaking. Occasionally, the machine simply decides to stop and drain itself so that you can start all over again!! No idea how long cycle is. Nearly done? No idea. No matter what temp or how much detergent or how much water, the clothes are not clean. The lid locks and so there is no way to know whats going on. I suspect there is very little water during rinse cycle. All of the whirlpool appliances are similarly horrible. Washer is the WORST. Shame on you Made in America.

Whirlpool Dishwasher MOD#WDT970SAHZ0. I have to wash the dish before it goes in otherwise it doesn’t get food or anything off. It DOES NOT DRY at all. Even when I add the heat extended dry button. The normal setting takes 3 hrs & 12min to run & again, doesnt really wash & for sure doesnt dry. I have added jet dry. I called and they keep telling me it should have more jet dry! Ugh! I now have rust happening because it doesn’t dry. DO NOT BUY THIS MODEL.

Front load washer Whirlpool Model# WFW9400SW02, only had this machine for about five years and the main interface control board has gone bad. This part cost 1/2 as much as buying a new machine. My parents had the same washing machine for almost 30 years and no problems. Whats wrong with this picture?

First, I was put on hold by the first female for 44 minutes, and then a second woman finally answered, and said she didnt know why she would send me to her, because she was in the sales department, and she put me on hold for another 25 minutes. I finally had to go, because I had an appointment. When I got home, I called back, and got a man by the name of John, and at least he recommended he could schedule a repairman. The problem I told him is, the inside wall of my refrigerator has 2 cracks on the side, and a crack on the back wall. I dont want a repairman to come, just to tell me he cant put 2 new walls inside of my refrigerator. I could not find an email, so I could email Whirlpool about this problem, and definitely, they were of no help. I bought the refrigerator at Lowes late 2003. I have never, in my life, seen the inside walls of a fridge do this. I spent a lot of money for this, for it to crack on the inside walls. It does not seem like something is right with this.

In the last two years, the inner glass door of the oven has exploded. The last time was Tuesday, 14th January. The oven door was ajar because we had just finished cooking dinner. The noise was deafening but the worst thing about it was the large pieces of glass thrown all over the kitchen. Most of which were large enough and sharp enough to kill a child and seriously wound an adult. I phoned Whirlpool to report this. The operative I spoke to was very polite but told me these things happen and I could have banged it a while ago and left a weak spot! She also said a Supervisor or similar person would telephone me that day. It is now Saturday 18th January and NO phone call. MY concern is there is no mention of this being a possible problem in their literature and their obvious lack of concern under a Health and Safety situation. Not to mention the cost of replacement door glass.

Whirlpool Gold Bottom Mounted Freezer - I advised Whirlpool that the refrigerator has two design flaws... one that makes the drain freeze up and even more importantly what is involved in correcting the problem. They replied that they were unaware of the issue when its all over the internet and has been for well over a year... maybe more. I sent them a couple pages of internet links and they said they would advise their engineers. As they have done with others, they suggested I should have gotten the extended warranty but that hardly addresses the problem(s).

Yesterday morning I was in my bedroom when I heard a bang... I went in to the kitchen and looked around and couldnt see anything. Then I saw my cat sitting on the floor and looking up at the microwave... It was then I noticed that the glass on the front was all crazed and making a tinkling sound. Several pieces had fallen on the stove top underneath. I had to call the repair man who said he had never heard of this before. He had to remove the door. I could not use my stove with the danger of glass falling in to food. He had to order a new door and I had to spend $65 then. When he puts the door in, it will be another $200 or more.

Ive replaced my ceramic stove top twice. First time it was my fault, I dropped something on it. But last week I was the only one home, stove was off and I wasnt even in the room. I heard a bang, went and looked around. Saw nothing. But when I went to prepare dinner.... shock, the entire stove surface was shattered!!! Now at over $600.00 to replace it I AM NOT HAPPY!!!

Purchased the new dishwasher in 2009 through the builder of our home. I quit working completely like there was no power to it. We replaced the fuse to it and then it worked, but kept pausing during the cycle. Sometimes it will completely go off and then when the control panel comes back on, it sits paused until you push the button. We replaced the computer with a new one and it works even worse. It shuts down more often and still requires a restart. So frustrating! Appliances should last longer than a couple of years.

Whirlpool washing machine model WCW4950XW2 - We have a barely two year washing machine that we purchased at Best Buy and it no longer drains or spins. After $100 repair call we were told that this is a common problem with this model. It is a transmission problem, and with the way the machine is built a repair person cannot get into the transmission to fix it. He suggested we buy a new washing machine. This is a travesty on so many levels! If whirlpool know it has a problem it should offer a partial refund for the purchase of a newer better machine. I keep thinking about what our landfill in this world look like with the proliferation of appliances that are engineered to last a year or two. I can guarantee you I will never purchase any Whirlpool produce again, and I will research whether other brands are associated with the whirlpool brand before I buy it. Sad that a once good company has gone to hell.

I purchased a side-by-side Whirlpool fridge and the ice maker stopped working 2 weeks after I purchased it. The retailer said that I would have to go through Whirlpool to resolve the matter. This has gone on for almost six months now. Ive had two service companies do 7 service calls to fix the problem and today, the 8th service call was supposed to happen and the guy never showed up. The company has lied to me telling me that it will just be one more service call each and every time.I want my refrigerator exchanged for a new one. They are refusing to do so until each service call is completed. I think they sold me a lemon based on the fact that nobody seems to be able to fix the issue. I cant seem to get anywhere with Whirlpool at this point and dont feel that I should have to keep a product that never worked from the start. Help! Is there some kind of lemon law on appliances?

We purchased the extended warranty (service plan number **). The washing machine has been giving trouble. It locks out during every wash cycle and each time, we have to unplug the machine to reset it. Sometimes it makes it through the next cycle and sometimes, not. The first couple of calls we made, we were told to make sure it was cleaned, to make sure it was leveled. All this was done and we still have the same problem. Finally, a technician was sent out. He could not duplicate the problem and left. Thirty minutes after he left, the machine locked out again. We put in for another call, we were told it would be two more days. In the meantime, we actually video taped the next three times it locked up. This time, when the technician came out, he was able to see our video as well as saw the machine lock up. He stated, It did not give me a code so I do not know what else to do. He left and ten minutes after he left, it locked out again. We immediately called back and they informed us they could not get anyone out again until next week. This is very frustrating to have an obvious problem and have an extended warranty and the problem cannot be solved. We feel as if we are being blown off. Is there anything you can do to help us and/or give us advise of how to get this problem resolved?

For years, Whirlpool has had an outstanding reputation for quality, so I cannot understand why a refrigerator I have owned less than three years has to have all the shelves and bins replaced. Not the glass, just the plastic. They actually started breaking the first year. I have literally had to tape my shelves together. These are very expensive and yet they are very low quality and of course are not covered on the warranty.The plastic is not built to withstand the cold and/or weight of food products. They need to get rid of the plastic and replace it with metal. I dont want to replace them with the same low grade products. I own the model ED5JHEXTB00 serial # HRU4010107. Also, the ice maker has been replaced twice. What has happened to Whirlpool

This refrigerator is a disaster. You will never be able to leave your home for any length of time for fear of a storm putting your electricity out which turns it off and if it DOES NOT TURN BACK ON WHEN THE POWER IS RESTORED. If you happen to be away for several days you will come back to a freezer that has defrosted all over your floor and your food in the refrigerator spoiled.

My Whirlpool Cabrio Washer is only 4 years old. I have had balancing & spin issues since day one. Thought it was just me. Constantly had to drain and spin after rebalancing. Now 10 days ago it cost me $250 to have it fixed. The aqcuator (?) Went. It wouldnt spin out. Now 10 days later it stops again. The appliance guy reads code. F7E7. He tells me the bearings are no good. Will cost another $400 and they need some special tool to fix it. IM DONE. My last set was 15 years old. The price is ridiculous and quality not worth what this triple capacity set cost.

I purchased a Whirlpool washer in 2010. It has started to rust. I called the customer services dept. They told me that there was nothing they could do about it because it was over a year old. I asked to be transferred to a supervisor. She told me the same thing. I told her that its not as if Im looking for a new washer. She said that there was nothing they could do; I had to pay for the repairs myself. I told her, After spending almost $1,000 on a washer, I have to pay for the repairs? She said, Yes, maam. I asked if I could speak to someone over her. She said that she had to take down my name and number and someone would call me back in 24 hrs ... from the management team.She asked for my number and not my name and said someone would be calling back. I told her, How are you going to forward the message without a name? Maam, Im sorry. Whats your name? I doubt if anyone will be calling me back. Whirlpool customer service sucks! They dont know how to treat their customers. Watch out for the warranty. What they call a warranty is not.

Most of my appliances are Whirlpool - dishwasher, refrigerator, clothed dryer and the Cabrio washer. The washer before this one, I had it for over 10 years and replaced it because of rust (thats another problem with Whirlpool - rust). Now the Cabrio hasnt got all kinds of problems - UL, F1 and jumping. The serviceman asked me for $450 for repair; it included a set of springs for the drum, a new electronic board and a 30-day warranty on parts and labor. Im better off buying a new one (I cant afford at this moment). My wife is scared of the darn thing and refuse to use it so now I have the job of washing and standing guard to make sure the washer doesnt leave the garage. Thank you, Whirlpool - and my refrigerator works fine all rusted.

Ive had a Whirlpool range for not even a year yet and the thing is on its third repair! First, the motherboard goes out twice. Then, a month after the second motherboard replacement, the broiler drawer handles melts off! ABT has been good at repairing it but seriously, I got the appliance last May! Now, Ive been waiting two months for some insulation piece on the handle. I think this product is a lemon and I am highly disappointed in this brand. I had called Whirlpool regarding this and they said their technicians would have to inspect the product and repair it. I trust them less to repair the stove than ABT!

Whirlpool Cabrio Washer - After 15 months, washer bearing have gone out due to tub seal leaking. Repairs are $450 but repairman doesnt want to touch it due to he know it will go out again. Whirlpool said Im sorry. Lowes said these are coming off the shelves soon but there are still some for sale. DONT BUY!!!

I currently rent, and so when our literally 30-yr. old GE dishwasher broke down, our landlords went out and installed us a new Whirlpool Dishwasher. I was excited because FINALLY I would have clean dishes and a dishwasher that didnt leak a bucket of water all over the floor. Well, weve had it for about 6-8 months now and I have to say that I am not impressed. It is not as great as I thought itd be. First of all, my dishes still look cloudy (despite using various brands - even homemade - detergent). Second, one out of every three washes gives me still-dirty dishes (food still on them, even though I rinse before loading the dishes). Now, Im not talking about tough stuck-on, need a jack-hammer to remove food. Just normal food. Mostly it is oil, like if I had a plate that I had eaten French fries on and there was grease left behind that normal rinsing didnt remove. A new dishwasher SHOULD be able to clean that! Third, it guzzles Jet Dry liquid (or whatever rinse aid you use) like an alcoholic in a bar. I have used a BIG bottle in one month. One month. With the old 30 yr. old dishwasher, it took me around 2 YEARS to use a big bottle. And lastly, it takes F-O-R-E-V-E-R to wash a load. My old dishwasher took an hour tops - to rinse, wash, rinse, and dry - and it was 30 years old. This new Whirlpool takes 3 HOURS!!! I can literally hand-wash all of my dishes (and with a family of 4 thats a lot of dirty dishes in one day), sit them out to air dry, and take a nap and it take LESS TIME than using the dishwasher. The dishwasher has all the bells and whistles to make it look good, but trust me, if I could have had the 30-year old dishwasher rebuilt to newness, I would have begged my landlord to do that instead. Dont waste your money on Whirlpool appliances. I left another less than friendly review for my Whirlpool Cabrio washer (only 5 years old), if you care to see it. Learned my lesson, dont buy Whirlpool. So disappointed because they used to be (USED TO BE) a reputable dependable brand.

Ive had this dishwasher for years and never a problem. My dishes are always clean and this dishwasher dries my dishes completely in a very short amount of time.

I bought my Whirlpool Cabrio (washer and dryer) in August 2007 ($1800 for the pair). I love these machines. I have only had one problem with it (I had to have a valve replaced - about $380, the machine made a screeching noise when it filled with water). Otherwise, I have never experienced any of the problems listed above. I bought this machine because I was pregnant and chose to do cloth diapers. I was doing nearly 20 loads a week at one point. Now, I do about 4 loads a week (would be about 8 loads in a normal machine). I love that the tub is HUGE and I can fit 2 sets of double sheets plus towels in one load. My clothes always come out clean and near dry.I wash everything in it - even dry clean only using the hand wash cycle. Prior to this purchase, my clothes were not clean. I could still smell deodorant in all my t-shirts and blouses. Not any more. Its the best purchase I ever made. Although, Ive always wondered why you have to clean a washing machine monthly when... well, its cleaning clothes anyway.

We hate the matching Cabrio washer dryer bought in 2011: Dryer lower blower went out after 18 months in service. The day it went out whirlpool sent me the extended warranty offer. Warranty had expired 6 months prior. I renewed for 12 months and promptly called for a repair. Cost was approximately $450.00, all covered under the newly paid for warranty. I dodged a bullet there. Washer has the splintering fiberglass around the top. Lower bearing is out and sounds like a freight train coming out of the laundry room. Not going to have it repaired. Looking for new units not manufactured by whirlpool. Shameful ROI. No more whirlpool products in our house.

I bought a Whirlpool washing machine on 16 Feb 2011. I started having problems with it in June. It was making very loud noises when it was agitating and the clothes were still wet after the spin cycle. I called Nebraska Furniture Mart where I purchased it and they said that after 30 days, I had to call the manufacturer. I called Whirlpool and they sent A&E out to fix it. The technician that came out spent an hour trying to figure out what was wrong with it. When he was gone, I was left with two inches of water on my washroom floor and I had to pull the washer and dryer out myself to wipe it up. He ordered a part that came the next week and a different technician came out to put it in. After looking at the washer, the second technician said that the first technician diagnosed it wrong and he ordered a new transmission for it. About a week later, the transmission arrived at my house and a third technician came to install it. The washer worked for a few days and started acting up again and leaking water. I once again called Whirlpool and they sent yet another technician out. I told Whirlpool that I had lost faith in A&E so they sent All Appliances out. The technician from All Appliances said that it needed a transmission and he would have to order it in. A few days later, he came back to install it. It worked for a few loads. The leaking had stopped but now, it does not spin out the clothes. To make matters worse, it now releases the Downy at the wrong time and I now have blue spots all over my clothes. I have made repeated calls to Whirlpool and talked to two different managers. I asked the first manager for her direct number so I wouldnt have to go through the whole explanation again if I needed to call back. But she gave me her number without her 4-digit extension so, there was no way of finding her again. When I talked to the second manager (by this time, I have lost my patience), I told him my whole story and I told him that Whirlpool has spent $1,000.00 between parts and technician service on a $460.00 machine and it still doesnt work. It is a lemon and I deserve a voucher for the full price to purchase something different.After one and a half hours on the phone, Lukas informed me that the only thing he could do was to send yet another technician to my home. I have lost all faith in Whirlpool and I believe that they do not stand behind their product. They only push you until the warranty has expired! I will never buy another Whirlpool appliance again!

Whirlpool Water Heater FG1F4040S3NOV - I had this water heater installed in 2005 by a professional plumber and every year since like clockwork, I have to replace the gas control valve/thermostat. Last year, Sears came and did the work and made their arrangements to have the part replaced. This year 2012, March 9 my gas control valve went again. The unit is not even a year old and broke again. Unfortunately, the six-year warranty is up on the hot water tank. I called Whirlpool two times. The first time, the guy told me that the warranty was up and hung up on me! The second time, the guy would not honor the replacing of a part that is not even a year old yet. The money I spent over the six years making repair on it, I could have bought a new one. This company is nothing but a bunch of **. Is there anything that I can do? I have paid to replace this five years in a row.

Three failures in 14 months. First, the detergent dispenser broke. Next, right after the warranty would have been over (fortunately, I purchased from Costco which automatically extends warranty for another year) the pump failed and had to be replaced. Now the heat element is obviously faulty because the dishes are cold through all cycles. So I have to call them back again. I have no complaints about the service company. They were polite and reasonably prompt. Just appears that the product is JUNK! I am going to Costco tomo and will explain the situation. They probably can’t do anything but maybe they will go to a better product for others.

Horrible Customer Experience. After having my Whirlpool side by side with bottom freezer for 5 months it quit cooling (both freezer and refrig portions). This happened on a Saturday evening and Whirlpool was closed until Monday (no emergency service shown on their website for my area). Whirlpool contacted their service agent and they could not come out until Wednesday. Service tech said compressor was bad and had to order new one. Compressor arrived the next day however they could not come back until the following Monday to install. By this time I was without a refrigerator for 9 days. Techs installed new compressor and by Tuesday it quit cooling again! Tech came out the next day and said he thought the problem was the compressor and now says its the evaporator. I had to wait until the next week before they would come and install the new evap. By that time I will be without a refrig/freezer for 16 days. I contacted Whirlpool customer service and talked to several different people and all they would offer me is $50. I will never purchase a Whirlpool product again!

I bought a glass top stove model number W10221843A. My son dropped a plastic cup on the top of the stove. It put a hole and shattered it. Now remind you, it was plastic. I barely use this side of the stove, so not like it was weak. I paid a lot of money for this product just for a plastic cup to destroy it. Is there any recall on this stove? Any help will be appreciated. Thank you.

My husband AND I purchased our Whirlpool Cabrio washer and dryer from Lowes in 2011 (Model # WTW7800XW2). About 10 months after I purchased this I noticed a hairline crack on the right side of the frame that holds the glass top near the hinge. I didnt think to much of this. I figured it may have been screwed to tight when manufactured. A few days ago I noticed the lid wasnt sitting flat and saw the crack had gotten much worse. The Cabrio lid is made with a heavy piece of glass inside a plastic frame allowing you to see through the top. Its pretty obvious that the plastic frame is not durable enough to hold the heavy piece of glass.I called Lowes and they told me that because I didnt purchase their extended warranty that I should contact Whirlpool. I called Whirlpool and was told it was a cosmetic defect because the washer still works. They also told me my washer is outside of its warranty so they would schedule someone to fix it but I was 100% responsible for the repair costs (which I found out will be $400). Out of curiosity I googled this issue online and found numerous people complaining about this exact same issue. When I told this to the customer service agent at Whirlpool, she said there werent enough people to recall the product. Why should I spend $400 when it was a design flaw that caused this problem? I found out the year after my washer was made, the lid was redesigned with a much sturdier frame, Coincidence? I think not!I havent had any problems thus far with the dryer but with the experience Ive had with this washer will make me never by another Whirlpool product again. I cant believe they wont stand by their product! Obviously they know this has been a major complaint on this model from 2011 because it was changed the following year. I have purchased many Whirlpool appliances over the years but dealing with this issues has been frustrating. Im so disappointed in Whirlpool and their lack of integrity!

I am having problems with my Whirlpool Water Heater. The pilot light goes off often and now it wont stay lit at all. I checked the thermocouple and measured the voltage, it is 19+ mV. So according to the manual, the gas valve/thermostat must have gone bad. I called the company and they gave me a name of the contractor but asked me to pay for the labor cost. This is a 50 gallon, 12-year rated heater bought from Lows in 2008. The heaters model number is BFG1J5040T3NOV. This thing has some serious quality issues.

Updated on 04/15/2019: Called customer care about my ice maker which have went out for the second time less than two years and the 1st replacement have only been 9 months from today. Unfortunately they tell me it’s out of the one year warranty process and they can’t help me. Well look like the 2nd replacement should have been under warranty still. Their products are a piece of crap and they know it and don’t care because theyre making money off of the consumers. Be aware and advise you to stay away from Whirlpool appliances. They don’t stand behind their brand. There’s no way anyone should have to be making repairs on a new 2000 and sum refrigerator. My old one is 18 yrs old and still working fine no problems, better than this piece of crap. Warning to consumers. Don’t waste your time and especially your money. Didn’t want to give no stars but you have to give at least 1.Original Review: Purchased refrigerator In July of 2017 and had to have ice maker replaced less than a year of having it. Now again ice maker not working again and only been about 9 months from the last replacement. I think there should be a Lemon law on these products. These refrigerator are not cheap and if I buy something new and spend a good amount of money for, I don’t want any headache and worries. That’s the reason for getting a new one.

We purchased a Whirlpool refrigerator (WRT5L1SMYF00) in April 2012. Within 2-1/2 months, items were freezing on the shelves of the fridge box. I called Lowes & was told to call Whirlpool. I did as suggested & they sent out their service co. tech, Turner Consumer Services. I had all the same issues as everyone else in these reviews. i.e., food freezing where it shouldnt or spoiling when the stat was turned down even one notch. The staff at Whirlpool was as uncooperative as is possible. They smiled and lied to my face during phone calls - anything to get me off the phone. During the next 4 months (till Nov.), techs came out 5 times, never having the part needed on the truck. Always, it was my fault somehow that my stuff was freezing. Their chosen tech service employees were rude, condescending and without knowledge. Five service calls, 3 parts replaced and numerous calls to Turner & Whirlpool got me nothing but stalling tactics. I, too, was told that their tech had to fail the appliance before they could consider replacement - all lies. The tech, when he gets here, says hes not allowed to fail the unit. On the 11th of Nov., I awoke to totally frozen-up coils which kept the fridge box from cooling. We had company here from out of town. We moved out the new fridge, moved back in our 21-yr-old unit and got through till our visitors left. Whirlpool has been completely unresponsive to my appeals for some relief from this fiasco. I continue to receive requests from Whirlpool to purchase an extended warranty. Really? My husband & I went out to Sears and purchased a GE & have had no issues with it whatsoever. We are older, on a fixed income, and can ill afford to purchase 2 fridges in 7 months, not that Whirlpool cares. Not only will I never buy another Whirlpool product, but I will warn everyone possible to not buy from them. In fact, my intention is to use every possible forum, Facebook, Twitter, any & all review sites here in KC, MO or anywhere to put Whirlpool down. I am, however, considering one more expense - a lawyer.

We went out and bought the new front loader washing machine and dryer. Neither one of them works correctly. A service call had to be made the the day we ran the first load. The washing machine only washes errors popping up F8 and E3. On the dryer error code E3 pops up and cannot dry clothes. Worst purchase I have ever made.

I installed this Whirlpool Gold Series oven in December just before Christmas. I cooked a 9lbs Turkey for over 4hrs at 350 degrees (it should have only taken 21/2 hrs at 325) used a thermometer to test the temp. Well the breast part was fine but later in the evening I removed the entire turkey only to find that the legs, thighs and bottom of the turkey was still RAW. Lucky no one had asked for that part of the turkey. Next I tried a small prime rib roast. Same thing happened. The top of the roast was fine and the bottom was RAW. I dont dare cook anything in the oven now. Called whirlpool and they are going to send someone to look at it but I wont hold my breath for any results. After reading the same complaint on several reviews and the TV show Marketplace it seems to be pretty standard for this product.

I bought my Whirlpool Cabrio Top Loading HE washing machine and dryer duo in February 2009. I carried an additional extra extended warranty for an extra 3 years. Now, at the dispenser where you add the bleach, it has rusted. The rust has gotten so bad the lid has detached from the body of the machine. I cant understand how a machine less than 4 years old could rust so badly. I called Whirlpool to complain and they suggested I get it repaired and my cost. A car that sits outside in rain, sun, snow and hail does not rust in 3 years. I bought the machines from Home Depot. The way Whirlpool has handled this, I will never buy another Whirlpool.

All of sudden, this expensive microwave stopped heating. Called whirlpool, they said they will charge $300 to fix it and $540 to replace. So much after paying new piece of garbage in 2-3 years.

My very expensive Whirlpool refrigerator thats three and a half years old broke down before Thanksgiving 2020. I am not able to get parts until after May 18th 2021. After calling numerous times and spending lots of time on hold I was told February 11th by Whirlpool that they had the parts in stock and they gave me a price for each part. Then they connected me to the parts department where they told me they dont have two of the 4 parts that I need. The price that they gave me for the same parts with a lot higher than what they told me at whirlpool. Whirlpool customer service was terrible its as if they dont give a damn. They just dont care.I cant believe its going to be 7 to 8 months to get parts for a three and a half year old refrigerator. I have fallen down my basement steps where I have a small very very old refrigerator twice carrying food up and down. Spreading mustard and sour cream all over my carpet my stairs my walls. Not to mention the fact that I have bruises all over my body. If I were you I would not buy a whirlpool. Its going to cost over $600 for the parts replacements that is if I can ever get them. Im going to have to break down and buy another refrigerator. Remember Whirlpool customer service is terrible and you can just forget about getting the parts.

We purchased a Whirlpool gas range for $600 in Aug 2015.. On May 2015 the range had an internal board failure (F2E0) and the panel does not control the oven or other features. We found out the part ranged from $350-$400!! Plus service installation! The one year warranty of course ran out but I think this is an outrage to sell an appliance that has such a poor electronic part. I have read a few similar complaints as this is also a Frigidaire model as well.

I was gifted a washer and ventless dryer for my condo. It takes a little longer than a regular dryer but it works great. It fits perfectly in a closet.

We purchased a Cabrio top loading washer (WTW6400SW2) and a Cabrio dryer (WGD6200SW1) in 2007. From day one the washer has tied clothes in knots, never cleaned the clothes properly, and sputters the detergent and bleach unevenly. The fabric softener dispenser clogs up too, rendering it useless. The knotting of the clothes leaves them so tightly wrinkled they come out of the dryer very wrinkled. The water level, determined by the washers self-sensor that weighs each load, does not fully submerge the clothes. The manual says this is normal operation for this model and that it will not affect the cleaning process. Wrong. The small agitator is insufficient to clean the clothes but does a wonderful job of twisting them in long, tight knots. I want to kick myself every time I walk past the washer for paying so much money for such a poorly designed washer. I was very sick when they were first delivered and wasnt able to do much laundry. By the time I was well enough to do more with it, I noticed the clothes werent getting clean and were actually being damaged by the washers process thanks to uneven detergent distribution/spotting from the clothes sitting above the water level, and being poorly agitated and rinsed. Before I knew it, my warranty had expired. It was a very hectic year. Ive been very sick. We purchased it from Lowe’s. I had their techs out a time or two to check it in the beginning, but they always smoothed it over with some waffy, generic explanation. Eventually, I was past my 30-day trial period. I was on my own with Whirlpool, whod refer me to the manual and make me feel like I just had to get used to the new technology of the self-sensoring washer. Ive read that Whirlpool is aware of this issue and doing nothing. Ive read other complaints that describe the same problems I have and its obvious this is a design flaw. I appreciate these posts because I least I dont feel like Im insane anymore. No, just horribly ripped off by Whirlpool.

The microwave was easy to install above the stove and it has the exhaust fan conveniently hidden out of site underneath it. The cost was very low and it is not complicated to set up and use. I also like the fact of not having countertop space taken up by having the microwave sitting on it.

We moved into our new condo a few months ago and my wife noticed that the knobs and front of our new Whirlpool Stove were getting too hot to touch so we called Whirlpool and since then never used stove. Was over one year old, we had to call their factor service representative. The charge was $98 plus labor $90 to tell us that even though the surfaces were way too hot to touch and dangerous to touch they were still within the factory specs of 167 degrees for the knobs, 152 degrees for the drawer, and 172 degrees for the front glass. He found the front of the unit reached 152 degrees which was hot enough to cause a serious burn when the stove was only set to 400 degrees. Why would a company set specs that will cause serious injuries? If my wife or grandchildren get burned by this crappy stove Whirlpool will be hearing from my lawyer. Stay away from any Aquaclean Whirlpool stove.

Our Whirlpool refrigerator was delivered July 27th, 2013 after waiting 6 weeks for it. I was getting something off the top shelf (side by side refrigerator) when a 2-liter plastic bottle fell and put a hole in the bottom shelf where it sticks out under the vegetable tray. I have had grandkids sometimes stand on that shelf of our other refrigerators without ever doing any damage to it. It makes me nervous of dropping something else. I would like to send a complaint directly to Whirlpool but dont know how to reach them.

I purchased a new high-efficiency front load Duet HT Whirlpool washing machine (WFW9200SQ02) in January of 2008 for nearly $1000. I dealt with the mold issues and permeating smell for all these years, but the machine failed catastrophically this month - after just over 3 years - on a $1000 machine! The rear bearing went out. The parts alone are nearly $500 and the labor is estimated to take 3-4 hours by a trained technician. We are talking about an $800 repair --more than a new machine would cost. The most disconcerting part is to see how often this is happening. It is commonplace. The bearings go out on these things, sometimes after only a year or two, sometimes after 3 or 4; but it is very rare to have any machine go longer than 6-7 years. Whirlpool wont do anything. The best chance is forcing a recall related to the class action lawsuits pending about the mold issues, but by that time, how many people will still have their machines?

My whirlpool Duet Washer has been repaired twice in three years for more than half the cost of the original product. Now it faces another repair--not worth it!Shouldnt a major appliance last longer than three years? Whirlpool will do absolutely nothing.

We bought this refrigerator (Whirlpool Model # WRF9913F1FM00) last August 2016. From day 1, the water coming out from the water dispenser was not cold at all. Same temperature as the tap water. By November, the refrigerator started to get warm. Apparently, the evaporator fan motor had to be changed according to the technician who spent more than an hour on the phone with their technical advisor to diagnose the problem with the refrigerator. After a week, the refrigerator got fixed. Not only did the refrigerator started working again, even the water from the dispenser got finally cold, too. Now four months later, March 2016, the same problem: the fridge started to not get cold again. In addition to that, the ice would not come out from the ice dispenser and water from the water dispenser is not cold again. When my husband checked inside the door, the ice were all clumped together. They looked like they melted. And even the ice in the freezer bin looked the same. And on top of this, the refrigerator was making so much noise. The technician was just here again today.

I grew up with Whirlpool appliance and thought they were top of the line. I have the washer and dryer and both are horrible. No matter what settings my clothes are on and no matter how little I place to be washed the clothes still arent getting clean. Way too little water in the tub. All my get so twisted. Anything with strings and stripes are ruined. I have never been so disappoint in a product. I never knew Whirlpool was such poor quality. Never again, so disappointed!!

I have purchased offloading washing machine in 13 Oct. Within three years it has given lot of problems. Every third month we have to call for service and spend lot of money. We had changed drain motor and condenser. Wiring is faulty. Machine will be down many times.

I hate this washing machine (Whirlpool Cabriolet) with every ounce of my being. That may sound harsh when talking about a washing machine. But, I assure you it is warranted. I have owned many washers in my day. This machine came to me after a family member passed away. The machine was almost new and had not been used very much at all. I found out very quickly that in order to simply wash a load of laundry could take as much as four hours. Every time you go to do laundry you get continuous codes and alarms. So it is a series of trips up and down the stairs to reset the machine, try to equalize the balance, and in many cases I have to unplug the machine and reset it all together. I have researched it extensively. And I have followed the instructions in the manual and from online instructional videos trying to resolve the multiple issues. I cannot wait to get an average everyday washing machine that is not too smart for its own good. I hate, hate, hate this machine!!!

I purchased a brand-new, $4600 36 gas range online. They finally installed all appliances by 10:30 pm last Friday, July 8, 2011. On Saturday, July 9, 2011, I woke at 2 am to weird smell (gas). I opened all the windows and went back to bed not sure since we never had gas before. Gas company came out that day and determined that the burners were bypassing gas. Jenn-Air said it was normal for some gas to come out and that they have sent the repair technician out three times to not find any leaks. The gas company red-tagged the stove saying it was hazardous. Jenn-Air has terrible customer service. I was on the phone Monday to Friday this week, every day talking with safety managers to supervisors with no results. This will be the LAST Jenn-Air purchase EVER!

I purchased the Whirlpool washer in February 2019 and delivery was in March. As stated in my previous reviews for the manufacturer, and subsequent repair calls, three; from the first time using the washer, it didnt fill properly for the amount of the clothes in it. A piece of paper towel never got wet through the whole wash cycle. I had to resort to raising & lowering the lid numerous times to get to the correct water level; adding water with a container or just pressing down on the switch under the top cover; 4-5 count. Needless to say very time consuming. As for hot water for doing white clothes, forget about it! It seem to me its the same problems with this whirlpool washer thats been happening with most of the other reviewers/purchasers. Did Whirlpool ever think about taken back one of these problem washers and checking it out for themselves? Maybe installing a clear plastic lid to monitor water levels at different wash cycles? Hot water temps when called for? Are these negative reviews ever seen by Whirlpool? Or in the trade is it called.... JOB SECURITY? Any more detail required? Cabo

I have a combo Microwave oven/oven GMC275PDS07. When the microwave is finished with the requested program, the end of program chime lets you know its done. Then, if the door is not opened for at least 3 seconds, the chime will ring again every minute thereafter ad nauseum. This will go on for hours without end. I know because I tried it. I reached out to Whirlpool via a web chat and my question was not even addressed. I was ignored. From reading other submissions, I assume this is de rigueur for Whirlpool. I then called Whirlpool and spoke to Katie in Tennessee. She was not able to bring up any make or model when I provided her the numbers exactly as listed on the inside of the door. She was not able to provide any respite from this annoying feature.This a Whirlpool Gold model, presumably the top of the line, in my book I will never purchase any Whirlpool product of any type and I will make it a point to let anyone who will listen that Whirlpool is not a manufacturer that takes its customers concerns seriously. Katie then advised that she looked up this feature and told me there is no way to turn the beeping off. I find this amusing since she could not find the model or serial number when I gave it to her.

Do not buy anything Whirlpool makes. I purchased a new home and new appliances. In less than 4 years motor is gone in dishwasher. 6 weeks later I have another leak that has ruined my hardwood floors. My fridge is making all sorts of weird noises and alarm is going off. They are coming to ‘look’ tomorrow. And my washing machine is no longer draining. Whichever you buy from check how the extended warranty works... Trail Appliances Calgary uses a company that is horrific to work with, doesnt have a human to talk to and wont acknowledge you unless you pay $149 upfront. RUN AWAY!!!

NU40T61-403 have had problems since day one. First problem was while heating up would make loud humming noise. Whirlpool sent out plumber. He adjusted plate under tank. That worked for about 2 months. Then pilot started going out. They send same plumber out again, also sent replacement part. Problem was fixed however about 2 months after that started leaking and flooding our garage. Called company again, was told that is no longer under warranty and stated we need a thermal expansion tank. I stated “why would we need this? This unit is only a little over a year old. Im not going to purchase another tank. A water heater should not overheat like this.” Long story short my husband has been burnt severely from the pressure build up as he was out in our garage walking past the tank when it decided to release pressure even though no water was being used at that time. He ended up at the ER with 2nd-3rd degree burns. I called Whirlpool again and was only told we need to install the expansion tank. Im so unhappy with this product I will never buy anything made by whirlpool again.....

I purchased the Whirlpool Gold series cook top range-stainless steel. It is of good quality and looks very nice. It is also easy to clean and for the price it has a self cleaning oven. I didnt think that I would like this range but over a period of time I truly love cooking on it.

Whirlpool Gold Convection Oven - I bought this new oven, cleaned it once. The bottom cracked where the spills had been. Since Id had it only two months, repair tried to say it was only cosmetic but had to replace it. Next time I cleaned the oven for multiple spills, (a year later) it cracked again, giving the bottom a shattered look where the spills were. I only cleaned it once and the bottom is ruined. I dont expect Whirlpool to stand behind this, but I agree these Convection Ovens require a Class Action Suit because they are selling faulty merchandise. Period.

Whirlpool Washing Cabrio machine model WTW5500XW0 - I purchased this machine five years ago. After about a year I started having problems where the clothes were not coming out clean. I contacted Whirlpool and was referred for a repair. The repair man told me these newer machines need the Affresh product to clean out the machine so this doesnt happen. I bought the Affresh product and there is still a problem. Every load of wash has to be put back in for another rinse cycle, sometimes two rinse cycles. Its ironic because the cover of the booklet for the machine says low-water washer which was the selling point to buying this machine. Instead of using less water, Im using DOUBLE the water.

Whirlpool under-counter dishwasher (model DU1345XTVB0) was purchased 14 months ago. Upper rack plastic adjustable wheel rack is broken. Will not replace. Dishwasher has probable design flaw with wheel positions causing overhanging load to put extreme stress on outer two wheels. The design was done to save money instead of having telescoping rails as most dishwashers do. Explained this. They will not even send a part. Many other Whirlpool dishwashers use these parts. Probable class action suit material.

We purchased a Whirlpool Cabrio washing machine in September 2006, and have had nothing, but problems. I constantly have to get online to check error codes. Several months ago, the washer just stopped working. We called Whirlpool technical support. They said wed have to pay for a repair. After several calls to Whirlpool for help, I found online references to a recall for the same problem. Whirlpool NEVER mentioned that the washer was recalled for the very same problem. I called them back with the recall information, and they politely sent someone out to rebuild the washer. Less than a year later it is no longer working, again. I went online first this time, to check for further recalls and complaints about the current problem (faulty control panel). I found many complaints about the same problem--even a reference to a class action law suit. Whirlpool said they were unaware of the problem, didnt have many complaints, and are unwilling to help. I asked for a supervisor, Benjamin, and he said there was NO means by which I could further escalate my complaint.

I purchased a new water heater in August 2013. The pilot light started going out in October/November of 2013. After calling the Tech Support phone number, (877) 817-6750, I was advised to clean the burner screen. First this is very difficult to do because the burner screen is underneath the water heater and almost impossible to access. Second the closet the water heater is in did not show any signs of debris that could clog the burner screen. I did as they recommended. Several calls, and several weeks later, they finally authorized a technician to come and service water heater. He performed a cleaning even though he couldnt find anything to clean; and he replaced the control module. The new control module worked through the spring and summer seasons and then I started having issues again in the fall, late October. Started calling the same phone number and was told again to clean the burner screen. I convinced them to send out the technician again. The A and E Factory technician came out and only cleaned the burner screen and left before I had a chance to get home. This happened several times and I called Whirlpool every time. The next A and E technician told me to try changing out the draft vent chimney to a different size, which I did. Problem happened Again! I finally asked for another plumber and they sent me 3 names of their authorized plumbers. I called Phil, Philco Plumbing. He told me that I needed to have more ventilation, so I added more ventilation, even though I later found documentation stating I already had more than what was required by the manufacturer. Again, a week later, started having problems. Call back and asked to have my personal plumber come out. This time the rep told me that I have always been free to choose any plumber I wish (why wasnt I given that option the first 10 times I called?). My plumber came out and replaced the control module and the thermocouple, but wasnt convinced that these were faulty parts, he honestly couldnt figure out why I am having this problem, but it was worth a try. That lasted about 1 week and now I am having the problem again!!Whirlpool will FINALLY authorize a new water heater, but they will not authorize installation for the new water heater. I have already spent money on recommended repairs that have not worked. I have taken 15+ hours off of work to watch plumbers do nothing that has rectified my problems. And now Whirlpool wants me to deal with installing the unit myself, OR pay to have it installed! They say they wont cover installation because I purchased it more than 1 year ago. They seem to be missing the fact that I have had trouble with it the ENTIRE time I have owned it!This Flame lock system is garbage. I found on Consumer Affairs that a few years ago a class-action lawsuit settled, dealing with the same issues. I think it is time for another round! I KNOW that I am not the only one dealing with this problem because the plumbers I had out all had similar complaints from many of their clients. Whirlpool wont fess up to the problem, but the problem is real.

We bought this product and had only had it for a couple of weeks when I spilled soup on the open microwave door. My mistake, but I would think that might happen to other people once in a while. The soup leaked around the window gasket of the microwave and streaked the interior of the door. It also ran down into the door of the oven and streaked the interior of that door. No way to clean this up that I know of without taking the door apart. I think these gaskets should not allow liquid they leak into the inside of these doors. Whirlpool says its my problem. They call it a use and care issue. I think its a design issue.

I purchased my Whirlpool Double-Oven one year ago and couldnt wait to use my new oven. I was told it was so efficient because I could use the top oven for quick baking instead of heating the entire oven (plus I could set it at different temperature settings). About a month in, I cooked 2 pizzas side by side. The first one burnt to a crisp and the one right beside it was doughy on top and burnt on the bottom. Not thinking, I blamed the pizzas! I also blamed myself, thinking it was me not being used to the stove.A few weeks later, I baked cupcakes. About 15 minutes in, I smelled burning and the cupcakes were raw on top and burnt black on the bottom. I called Whirlpool and they sent a technician out and he replaced the circuit board/clock. Worked for a couple of weeks and then the burning began again. Called Whirlpool again - another technician came out and adjusted the temperature. Here I am again, had to call Whirlpool again.This stove has been so inconsistent and Im so tired of wasting food because of this stove. My 4-year old Whirlpool dryer also went out last week so needless to say, Im not very fond of Whirlpool right now! If you are planning on buying a Whirlpool product, buyer beware and I hope you have a lot of patience...

Our Whirlpool is 8 years old and - knock on wood - it has been very dependable. It has enough settings to take care of the range of our dirty clothes. It is a front loader and I like that type - it gets the clothes clean in cold water.

We bought a house almost 10 years ago and it included a Maytag washer and dryer. About 5 years ago, we decided to buy the Whirlpool front loaders. What a mistake as the washer shook every time it ran. After several warranty service calls and days of vacation waiting for the service, they finally said they couldnt do anything. During that time I had been in contact with Whirlpool and asked for them to take them back. Of course they wouldnt. I asked for a swap for top load washer and they would need to also replace the dryer to match: still no deal. It took a letter from a lawyer to make it happen. They also bought back the washer and dryer stands which covered the lawyers costs.So shortly after I received the Cabrio washer and matching dryer, the lid is very heavy which I believe the lid spring broke. I refused to call the service company as I did not want to go thru that crap again. I also know I can fix it myself easier and without all the drama. I keep waiting for another failure but so far all is acceptable. Whirlpool is not the same company as they were when I made my living doing warranty service for Whirlpool! 30 years ago they were the best in the industry.The Maytag pair was giving to our relative and they are still working flawlessly. Unfortunately Whirlpool now owns Maytag. This experience has cost Whirlpool replacing our kitchen appliances. As much as I want to buy American, I will go with Bosch or LG only.

I have been trying for a month to get my fridge repaired. 2 techs later and still nothing. The 1st tech never turned in his report and I was informed by your customer service that it was my problem and I had to try to track him down and get it turned in. Tech #2 just left my house. He walked in, stuck his arm inside the freezer and said feels cold to me. I pointed out the melted popsicles and that the ice maker was not making ice because the freezer is not freezing. He then said he doesnt have the tools to do the repair, if it can be fixed, and to call him back after the Holidays. I have been w/o a fridge since Thanksgiving... a month. And no one has a solution. I was sold an inferior product that has a manufacturing flaw but I have to suffer for it. $800 out of my pocket and all I get from Whirlpool is Oh Im sorry to hear that. We can send out another tech. The fridge is less than 6 months old and still under warranty. It is a defective product that Whirlpool refuses to stand behind. I guess they are trying to wait out the warranty period so they are off the hook and we are stuck buying a new one or paying the tech for the repair. DO NOT BUY WHIRLPOOL PRODUCTS! Go Samsung, my previous model.