I bought my Whirlpool induction stove several years ago. We normally use a toaster oven for baking as we are only 2 in our home. Last year I decided to cook a large turkey for the family. I threw the turkey into the oven and started cooking it. After an hour or so I decided to start cooking the potatoes etc on the stovetop portion. My potatoes started cooking and my element shut down. I did everything I could to get it going but finally resorted to the manual to see if there was a suggestion. The suggestion was that the oven had heated the burners too high and that I had to shut off the burners and wait for 5 minutes and try again to use them. The oven was only cooking at 300F. I waited 15 mins to get it running again. The stovetop went out once again and I had to stop cooking. Conversely Ive had the same issue with the oven. Ive been cooking in the oven and have had it shut down as a way to address the stovetop being too hot. How am I suppose to cook on this unit with any kind of confidence? I did an online chat with a rep today and they suggested getting a technician over to the house. I was told I could pay $129 to have them look at it. This is obviously a design flaw that I was never told about prior to my purchase and would never have bought had I known. Shame on Whirlpool!

My elderly parents had everything they own destroyed in Hurricane Sandy. After rebuilding their home, the new Whirlpool washing machine was broken. Whirlpool refused to disconnect and remove the machine that was obviously broken before it arrived. This is something that no one should have to go through. It is appalling and bad business. Through the kindness of friends, we had several male friends help with the removal. Truly shocking, that this is how Whirlpool handled this situation.

I had sold appliance for ten years. I purchase a Whirlpool Cabrio 2010. After two years started rusting. It is rusting on the outside and now on the inside, that I cannot wash delicates or whites. I so disappointed. I had lots of confidence in Whirlpool. The model is wtw7300xwo... I call talk to whirlpool but got no help. Now I going to need to purchase a new washer. It will not be a Whirlpool.

Whirlpool Washing machine Model WTW4800XQ1 - This machine ran fine for the first 6 months, even though my old machine took 40 minutes for a large load and this one takes an hour. Then, I had to call the repairman out and he said it was the fill valve. He didnt have one on the truck and said he should get it in within 3-5 days. Well a month later, I had to call Lowes again to find out what the problem was. They had him back out with the part within 2 days. Then, I had to call again. This time the repairman ran a test and found a bad spin motor, he had the part on truck. Third time to call and the machine is back to not spinning out properly. My old machine lasted over 14 years. Whats wrong with these new ones?

Rust around the inside of the top of the washer. They do not use stainless for this part of the washer. It is some sort of cheap tin material that will rust in less than the first year. They have gone cheap on building but still think their products are worth the expensive price they ask. Do yourself a favor, pop the lid and look under what they do best to hide and also they removed the pop down door on the dryers so you cannot vacuum out the excess lint build up. Tragic lint gets hot and starts to burn in the gas models and stink. They should be ashamed of themselves. They have bought up most of their competition and now they have gone cheap on product production but not on price.

We have a small space that fit a washing machine and figured we could add a dryer on top but didn't have an outside vent, so took a chance in this model. It fit perfectly in the space and saves us from a regular trip to the laundromat. It takes a bit longer to dry but is energy efficient.

Weve had this washing machine only a few years, and our household of 2 probably averages 1 load of laundry per week. Weve always had the same problem everyone has with the detergent stains on clothing and having to rewash loads, and the only remedy weve found was using the oversized loads setting and rewashing a load. The last straw was 6 months ago. It quit going through a complete cycle and would not spin out without resetting it. Then it quit spinning out at all. Service Guard, a 3rd party warranty company, diagnosed a faulty motor and ordered a replacement. After a long delay Whirlpool advised it was back-ordered for 3 months. A week ago Whirlpool advised them it was now back-ordered until 5-27. They did not know whether wed ever obtain a replacement motor. After taking clothes to our sons house for a couple months to wash, we purchased another used machine to use until ours is repaired. It is beginning to appear that machine may be our permanent machine. This is a pretty sad testimonial about whirlpool. We have always used Whirlpool appliances but appears we may have to switch brands. And it certainly does appear these low water machines are garbage. Very disappointed in Whirlpool.

My wife and I purchased a Cabrio washing machine and dryer, this is by far the worst washing machine we’ve ever owned. It hardly fills, even in deep water cycle. If you watch the clothes through the smoked glass lid with a flashlight, you can see they don’t even go underwater. The dryer seems to be fine but I would never recommend the washing machine to anybody looking to buy one.

I have a Whirlpool cabrio washer (Model: wtw6300 Serial Number: CT3573525) and I am very disappointed with it. The spin cycle is the worst--sounds like a jet engine and gives me the UL error message of unbalance load. The machine was purchased in 2007 but was kept indoors. At the beginning, I didnt care because I had warranty with BrandsMart. I had to call at least four times. But now, I bought the automatic control and it didnt work. For two days, I was trying to balance this machine but it is impossible since the beginning.I contacted customer service and they advised me to contact the repair service in my area to get a diagnostic analysis of the issue. Hello! I already know what the problem is after reading all these reviews! I cannot tell you how pissed off I am. I will never purchase anything Whirlpool. Two of the gas burners of my Whirlpool kitchen, after two years of use, are no longer working. I will definitely contact BBB as soon as possible. Come on, fellow complainants, let us continue to fight to get a possible recall soon! We all have the same problem because this is a manufacturing defect!

I found this site while looking for a part number for the thermocouple. Lowes had one, but not for the FG model. I decided to call the number on here from Chris to see where I could buy the correct one with left-handed threads. I was told that they would sell me the conversion kit, but I couldnt get just the $8 thermocouple. Then $47.90 later and the conversion kit is on its way. Im not happy about it but at least I got 6 years out of my water heater before the thermocouple failed. The plus side is next time, I can get the $8 part from Lowes and not be without hot water for a week.

I just experienced the same problem with my top load Whirlpool Cabrio WTW7800XWO. It is 3 years old, and I paid $900 for it. The plastic that surrounds the glass top is broken around the hinge. I had to pay $75 for American Home Shield to diagnose this and now I am waiting for them to order the replacement part - the part is around $190 from Sears or 245 from Partselect.com. What a pain. PLUS, the machine is so noisy and starts to vibrate loudly toward the end of the cycle.

I like the looks with brushed stainless steel and black. The most difficulty was getting someone to help get it and load it. But other than that, Ive had no problems with the dishwasher.

We bought a new Whirlpool gold gas stove. We had just finished redoing our complete kitchen, and thought it would be nice to replace appliances. I thought Whirlpool had a reputable name and good service record, but clearly, I should have checked. Three months after installing the stove, the handle pulled right off the door. We called the service tech who came in, took the door apart, and replaced the handle, but for some reason, installed different and incorrect screws for the door. Over the next 7 or 8 months, the handle pulled off twice more, and we repeated the cycle. At this point in time, we had been experiencing a situation where the stove would shut itself off. Bear in mind, it is less than 18 months old. Even now, the oven heats, and mid way through cooking anything, it decides to shut itself off. Clearly, there are issues with Whirlpool products, and when I called them, they want to do nothing about it. They jockey me around, from one service person to the next, frustrating me as I have to retell the issues to each new individual, and then they only tell me a replaced board, which would cost more than $600, is the way to go. Ive had this stove for 2 years, and it is seriously the biggest piece of garbage anyone ever put out on the market. Apparently there are no recalls on it, and so apparently, Whirlpool is more interested in ripping off their customers, than standing behind their product. I am currently seeking permission in a local paper to write a public service piece. I hope people will read it, and avoid this company at all costs. I hope whirlpool enjoys it. I dont know how they have turned a blind eye to all these complaints. As far as what I have read, with regards to other whirlpool problems, exploding glass, dangerous fumes, etc. They should be investigated, because what they are pulling off is criminal. If I want someone to steal from me, Ill leave my doors open, and let them come take me for what I have. I dont need to support a company that is stealing from me, while they wear smile on their face.

We purchased a Whirlpool washing machine for $600 from a local retailer and it broke down within three months. It is now been two months and two repairman visits later and still not fixed. I called them and talked to customer service who then transferred me to another department. So far it’s just been the typical runaround with no results. I demanded an immediate replacement but was told that would need approval from yet another department. I don’t remember what departments are involved nor do I care. I am simply disgusted with this baloney.

We bought the Whirlpool duet washer & dryer in the winter 2011. The washer is absolutely awful. I have to keep it set on the Whitest White setting so every load gets a second rinse. In order for my clothes to smell CLEAN I use bleach in every load I can. With the loads I absolutely cant use bleach in, I have to be standing waiting to put the clothes in the dryer or I have to rewash the entire load because of the smell!! My towels are ruined from the bleach and my clothes are faded because of the multiple wash cycles. I have used the recommended Affresh numerous times and it does not help! Needless to say this washer was a total WASTE of money! We will be purchasing a new washer very soon! It will NOT be Whirlpool!!

In 2010 we had to purchase a new hot water heater. Went to our local Lowes store to see what they offered. We decided to buy a Whirlpool energy smart electric water heater. It was large, 50 gallon. We have a large family and didnt like running out of hot water so we thought this would be great. Worked fine until yesterday when I kept smelling an odor like something melting. Could not figure out where the smell was coming from until this morning I got in the shower and had very little hot water. Went downstairs and seen the water heater was not working. Got the user guide out to see if we could pinpoint what was wrong. It said no power to control board. I checked the breaker box and found no problems. I got a flashlight to look at the control board and discovered it had overheated and melt the top of it. Have been on phone with Whirlpool nonstop with just a recording. The heater has a lifetime warranty so Im trying to get the replacement part for it that will cost me $115 plus shipping. I am really concerned that with this overheating it did not trip the breaker. Grateful it did not start a fire and worried if we repair it will this happen again and possibly not be as fortunate. I have seen on this site of another complaint with the same problem. Shocked there hasnt been a recall issued. Be careful!

Very sad appliance company. I purchased a Standard Pacific Home in June 30, 2015 and moved in Aug 1, 2015. Use my Whirlpool Dishwasher for the first time back in Oct and it was not working properly. Whirlpool scheduled an appointment with Accord Appliance in Temecula Ca and the company was a no show. Called Whirlpool back and Rep Emma was very rude and had to call supervisor to schedule another appointment to repair dishwasher. Whirlpool have sad employees and sad appliance.

Purchased this beautiful sleek Cabrio washer in May 2012 from Appliance Smart, with its modern looking glass top, it looked so nice. The washer itself works ok for now, but it does unbalance a lot, thats not main issue. We deal with that. The poor design of holding that sleek glass top in is the problem. After a little over two years, it started cracking at the hinge that is just mounted in Plastic which holds the whole lid down, including the heavy glass. The glass started raising up, causing steam to escape. The lid is rubbing and very difficult to open. Appliance Smart is gone now.. We called the service repair person about 6 months ago, he looked at it, said its a problem that is not covered on our warranty and it would be approx $350.00 to repair!! So today, tomorrow or next week it will stop working because the lid is popping off! Its a terrible design, dont be fooled by its sleek look. The manufacturer takes no responsibility for this major design flaw. Beware, the very thing you need to be fixed wont be covered under warranty, lemon law, or just good customer service. We have owned several Whirlpool appliances and doubt that we will own one again, due to the way this issue was handled by Whirlpool.

We purchased our Duet in July 2010. It worked great until two weeks ago when the washer sounded like a 40-year-old washer. The bearing sounds like an extremely high-pitched “wrr”. We can hear it in the back of the house. I looked online to get parts and noticed that you cannot replace the bearing. You must replace the entire rear drum ($358.00). This does not include the labor. I talked with a technician, and they said the whole drum must be removed, not a one-man job, and to take the whole thing apart. Now, theres no price for installation. Lets go low ($200.00). Probably more. I cannot get a price nailed down without a visit. Now add those together ($558.00), I could put almost $600.00 into a washer that this could happen to in another 2 years. Wow.We had a washer that lasted us 15 years without any parts. Is there anything that you can do to help me? This is totally outrageous. Please help. Thank you. This was part of my chat to Whirlpool. Whirlpools response was I understand your problem but cannot help you. It is out of warranty. No help, no discount, nothing. I will and have all my friends never to purchase Whirlpool. This is from a so-called American company. Im very disappointed.

I purchased a Whirlpool dishwasher in December of 2015. It has had very light use, and today I found out the motor needed to fix it (it does not wash the dishes) is going to cost almost $500. Whirlpool used to be a very reliable manufacturer. Obviously, those days are gone!

Our Whirlpool 40-gallon electric hot water heater, purchased in 2008, has performed fine, until today when it flooded our basement and, of course, did not provide hot water. As the paperwork says, it has a 12-year warranty. What options do we have for repair or replacement, preferably replacement?I was unable to contact anyone on the 877-817-6750 number due to the bad weather. The model # is EE3J40RD045V, the serial # is 0742130246, and the product # is **.

The wife and I are retired and when it came time to purchase a new washer, we thought we would spend the money and buy top of the line so it would possibly outlast us. So we went to Lowes and spent $1000.00 plus on a Cabrio. Within the first year, the control board went bad, replaced under warranty, now no matter how little or much of a load the wife puts in this piece of crap, it goes off balance!!!Of course as previously stated, customer service doesnt give a crap because we also saw no need for an extended warranty having made such a large investment in a washing machine that we thought was built with a high standard of quality, SHAME ON US, SHAME ON YOU, WHIRLPOOL!!! You have lost a customer who has been buying your products for a long time but will never buy another and will be warning everyone we can to do the same.

I have owned a Whirlpool Gold refrigerator since 2011. It has required two repair calls due to a water leak. The company did repair it free of charge on the second visit even though it was out of warranty. It is now leaking again which has caused damage to my wood floor and basement ceiling tiles. I am told that I have pay for the repairs this time even though it is the same problem. I was offered a modest discount to purchase a new refrigerator. I will never buy another Whirlpool product. This refrigerator should be recalled. I recommend GE products. They stand behind their products and they last a lot longer. Shame on Whirlpool! So many complaints with very little response .

Whirlpool microwave oven a few months old stopped working. Customer service center not helpful with prolonged holds (>30 minutes), no response to email, and amazingly no response to live chat. The 800 number was busy at one point for over an hour. When I finally did get thru, there was no coordination with local repair men, and a factory delay on the parts. I am going on 6 weeks without a functioning microwave and 3 kids at home. Thanks Whirlpool.

Product number 0733318 Terrible water heater - Check valve went after 2 years. Replacement has to be shipped from TN. $30 to next day it or else I can take cold showers for a week. Warranty does not cover shipping or installation. My opinion, buy puts on WHR. Absolutely crappy product.

Had the entire kitchen remodeled. We bought a Whirlpool Gold French Door refrigerator from Sears, did not buy an extended service contract. The refrigerator has NEVER made an ice cube. The water dispenser in the left door sometimes works, mostly not. The fridge freezes the food inside, temp. set at 41°F. The entire ice maker has been replaced, several valves have been replaced, a service company rep. tore the back off the fridge, found some insulation misplaced, said he repaired that. We have been very patient. Three repair companies have been sent out by Whirlpool, two said the refrigerator CANNOT BE REPAIRED. Whirlpool told me the only resolution is repair.Whirlpools Customer Experience Center is a joke, they do nothing but try to schedule another repair call. Tell you how sorry they are about your problem but do nothing to solve the problem. Carefully trained to give you the BIG runaround and nothing else. You never get the same person twice or the same city twice. Patients exhausted. Calling my lawyer. I would strongly advise anyone needing a new refrigerator not to buy a Whirlpool product. You should also check the list of other brands they make, there are several. I wouldnt buy them either. Buy a fridge made in Japan by a Japanese company. They get it right and know the Quality Process.

The only model number I can find is W10484489A.... Do NOT buy this machine. It is pathetic!! This machine cannot handle more than 2 bath towels at a time!! It will just keep trying to spin, yet NOT spinning, then when you stop it, there is no choice to just spin again, you have to rinse and spin!! Unbelievable.... takes a whole evening to do one load of towels!!! (actually a whole evening to do 2 towels) I hate it!!! Not to mention, whatever they designed between the tub and the door, a rubber whatever it is, is nothing but a catch for disgusting bacteria and slime. Considering the amount of wash I DONT DO, this is unacceptable, even though I have bought and used the new washing machine washing stuff!!! Honestly.... had a Maytag Neptune before this machine..... that is the way to go folks, pay a little more, but way more satisfied. Cleaned like a gem, unlike this whirlpool, cleaning is at best mediocre!! Unfortunately, I broke it, asking it to wash huge 120 in round table cloths for my business, and heavy chair covers..... Had I have know.... cant even wash 2 towels in this new Whirlpool machine!! It is heading to the curb with all its disgusting places you have to clean, I will pay someone to take it away, seriously cost me a ton of money in re-spinning (or yeah, and re- rinsing, cause you cant just spin something), would have been better to fix my MAYTAG!!! I hate Whirlpool!! Do not buy one!!

Near 3 years ago we purchased this side by side going by how good Whirlpool products are supposed to be. Recently the bottom freezer started frosting up and not clearing. Tried all suggestions in the manual. Could not find any information online. The manual was useless. I went online to Whirlpool support 3 different times asking for help. Never got a reply. The racket it made was driving us crazy. It short cycled since it was frosting up. Set up an appointment online. They got that correct and responded quickly. Go figure. The tech came was very nice & professional. No warranty. Find out they only provide a one year warranty. That is absolutely nuts. A refrigerator should last 15 years with no major problems. Should not have needed a $500.00 extended warranty for a $1,300.00 refrigerator. Turned out 2 components needed replacing. Cost just over $400.00. Now were worried it is going to fail again in who knows how long. Whirlpool used to be a respected brand. Never again will we buy a Whirlpool product. 1 year warranty show you they know how cheap they are building their products.

I purchased my Cabrio washer and dryer 2 1/2 years ago, and for the past 6 months, I have dealt with it being unbalanced and I tried everything to get it balanced. When I researched the problems, I found so many other consumers are having the same problems and that Whirlpool will do nothing about it. I decided to start a petition on Change website to try to force Whirlpool to stand behind their product and correct the problem, offer us a refund or another product, or even fix the darn thing. It is tough economic times, and we spent money to have something that was energy-efficient as well as a product that is supposed to carry a good name. I am a single mother with three children, and I dont have a $1000.00 to throw away after 2 years. This is shameful that we, the consumers, have to deal with this. Please go to the Change website and sign my petition. The more signatures I get, the more leverage we have to deal with Whirlpool. Lets pull together and show Whirlpool we will not stand for them robbing us of a quality product. Thank you so very much.

We purchased a Whirlpool Cabrio washer brand new from Lowes. It did great for about 6 months when a terrible grinding noise started. Then it also would not spin dry the clothes - they would come out completely soaked. Repair guy came out and fixed it. Lasted for about 1 year - same thing again. Lasted about 1.5 years this time and now the loud grinding is back and my wife - who Ive heard cuss just a couple times in 20+ years - said, This ** thing sucks. The clothes are soaked. I cant stand this washing machine. So, Off we go to buy a new machine. Definitely not a Whirlpool though. Id give this machine 1 star because it does a decent job for a while but major repairs 3 times in five years is not what I deem an acceptable appliance.

Within 5 months my 850$ dishwasher broke. 2 months to repair and 15 plus hours on the phone. Warranty is cryptic. You must allow them 30 business days from when they order parts. Buy Bosch, wish I did!

In 2013, my husband purchased a Whirlpool Hot Water Heater model #E2F40RD045V 40 gal. from Lowes in Vancouver, WA. On 12/12/15, had to call a plumber, the hot water heater was intermittent hot/cold. He flushed it, checked all power connections and changed the elements. On 3/18/16, NO hot water. Having a 6 year warranty, I called Whirlpool. They gave all kinds of excuses and told me to try a bunch of tests. By the time I got back to call them they were closed. I called them again on Monday 3/21/16 and said nothing worked and it had popped the breaker. They said change the elements. I told them I had just changed the elements 3 months before. I told them it was faulty wiring. They said the top element must be faulty. I gave up at that point and called the plumber. He came right out the next day. I had purchased a Rheem hot water heater to install and asked him to check the Whirlpool hot water heater elements he installed before he removed it. That is when it was discovered that under the insulation around the bottom element it was all scorched from FAULTY wiring. I called Whirlpool again and told them I could send them a picture and they said dont bother and immediately gave me an RA to return the hot water heater to Lowes. I told them I had already purchased another hot water heater and it was not a Whirlpool. I am going to request a refund.

I purchased a Whirlpool 3-door refrigerator with the freezer on the bottom on 8/17/12. Within 4 days, the ice maker stopped working. It took two days for the repairman to come out and fix it. So all is well with that. Less than 2 weeks later, the refrigerator isnt cooling. Several days later, the repairman came and determined it was the evaporator fan motor and clutch. The parts were back-ordered for 10 days. Parts came in 2 more days before he can come out and install them. He realized they sent the wrong parts. Another week went by, then he came and replaced the fan motor, which is now making an ear-piercing buzzing sound. He came back a week later and said it needed a gasket, which is back-ordered. In the meantime, he put some stick on insulation around the unit. Not much help. Another week went by, and the gasket showed up. It is still making a high-pitched whining sound. He said it was the compressor. Whatever! I hate the refrigerator. The sound is one that just grates on your nerves and you can hear it in all the rooms surrounding the kitchen! A repairman has to deem it unrepairable before they will even consider replacing it. They consider it fixed. What about my bleeding ears! I just want it gone! I am so disappointed. I thought Whirlpool was a good product with a solid reputation. I have a $2300 noise maker! Is there a class action lawsuit?!

Bought this Whirlpool washer (WTW5000DW0) to save energy and water consumption. It has been awful from day 1. Clothes come out with detergent (white marks) all over them. Clothes aren’t spun out enough to dry them. It takes FOREVER for a load to finish, I can’t imagine that this is saving me anything on electric. Waste of money. Do not buy this!

Cabrio Platinum Washing Machine - We received this washer and dryer set as a gift so I cant complain on the cost. However, it does NOT clean your clothes. Water smells at the start of each load, clothes are left with soap scum and several clothes have been ruined by oil stains!

I have never had such a horrible experience in my life as I have with Whirlpool. Refrigerator ($2,500) broke within three months, and then broke again another two months later and hasn’t worked right since. They have the most horrible customer service, parts are on back order, I’ve had to throw away hundreds of dollars worth of food because everything keeps freezing but they do not care. Ice machine has been broken for over a month for the second time. They are the worst company I’ve ever dealt with. Buyer beware. Do not buy anything from this company. Their products are the worst and they have zero customer service. Good luck if you buy something and it breaks. You might as well just buy a completely new appliance.

Just got new side by side to replace old one. Motor runs every 30 minutes. Stays cold and makes ice but Im concerned about noise. Called Whirlpool and was told to record noise and show to Home Depot where it was purchased. No help from either place. Need to call warranty company. Funny thing it arrived with pieces of some sort of shrub in drawers. I guess this is new and improved and energy saving like newer washer that takes 45 minutes to wash a load.

I purchased Whirlpool dishwasher in March of 2011. In July of 2011, the stainless steel front started getting rust spots. Called Whirlpool and they sent a local repairman out. After 3 weeks, I called Whirlpool again and was told that the rust is cosmetic. I insisted that I have other appliances with stainless steel and they do not rust. Either they used a inferior grade of steel, or its not steel at all. They repeated it was cosmetic and they are unwilling to do anything about it.

I purchased this machine from Sears on 04/23/2016 and have had nothing but problems and issues with it. It is loud and makes different sounds every time I use it. It has overfilled and underfilled with water a few times, the machine shuts down while washing and I have had to restart the machine. Half the time the clothes come out covered in soap and I have to put them through another rinse cycle. My bedding always has to either go through a second rinse cycle due to being covered in soap or I have to rewash it because it is all packaged together in the fitted sheet and never got washed. During the spin cycle it sounds like it is getting ready launch into outer space and it vibrates excessively. On numerous occasions I have had to untie my clothes as they are tied in knots. There have been times that I had to put the clothes through another spin cycle because the clothes contained too much water. The final straw was last week (03/27/2019). I washed my sheets and they came out bundled up in the fitted sheet full of soap stains and I had to rewash them. When the sheets were done I put the comforter in the wash and started to clean the house. When I went into the laundry room the washer was not running but the wash light was on so I opened the lid and felt the comforter and found it to be dry. I closed the lid and pushed the start button. After a few seconds the washer shifted to rinse without even washing the comforter. When the washer stopped running and the ready light came on I removed the comforter, unplugged the machine, shut off the water, disconnected the water hoses, placed the machine on a dolly and took it to my scrap pile. I could not find any Whirlpool washers with any good reviews so I purchased a Speed Queen with a 5 year parts and labor warranty.

2 years of use the wash plate went. $150 later, one year later wash plate went again (the wash plate is all plastic, the motor spline in metal total stripes the plastic teeth in the wash plate) I replace myself. 3 weeks later the shift actuator failed which cost another $60 which I replaced. Now the bearing is going. There are only 3 people living in the house. I would stay away from the top loader washers from Whirlpool h2 low series. Huge disappointment.

Chris from Whirlpool contacted me the same day that I filed my complaint. He offered to replace our water heater at no charge. We will pick up our new water heater this weekend and install it. Hopefully, it is designed better than our current water heater.

My wife and I purchased the Whirlpool French Door Bottom Mount Refrigerator in April 2013. Thank God we purchased the extended warranty. In June 2014 the ice maker quit working and delivering water. We have had the service contractor that WHIRLPOOL has qualified for all repairs. They have set up FIVE appointments to resolve the issue, all of which I had to leave work to meet because they do not provide any scheduled service outside the hours of 8am to 4pm. The first time they came the service man told me that WHIRLPOOL RECOGNIZES THERE IS A DESIGN FLAW BECAUSE THESE ARE NOTORIOUS FOR FREEZING UP AND NOT WORKING. I asked the repair man if there has been a recall because of this, he said no because WHIRLPOOL WILL JUST REPAIR THE ONES PEOPLE COMPLAIN ABOUT! I called Whirlpool headquarters today. The advisor said he will register my complaint. I asked, Is that it? What does that mean? He said, I cant tell you what happens after I register the complaint. I WILL NEVER PURCHASE ANOTHER WHIRLPOOL PRODUCT. I hope this may help someone NOT make the same mistake. If you need to talk to someone in upper level management to discuss your issue, forget it...they want the position but no accountability.

We have a Whirlpool double oven that is about 3 years old. Today we used the oven for lunch and about 2 hours later we heard a loud sound from the kitchen. When I went to see what had happened I found glass shards all over the kitchen, some as far as 10-12 feet away. The outside glass of the top oven was spider-webbed and had apparently exploded. Nothing had come into contact with the oven and nobody had been in the room with it for over an hour, it just randomly exploded. I am going to contact Whirlpool but judging by the other posts I dont expect much help from them.

I would not buy any Honeywell electronic water heater thermostat. Has failed two times. I have to pay for a new one to be mailed and for repair. A bad product from all the reviews. Honeywell is claiming they do not service it anymore and gave me a Sears telephone number. Servicemen have said it is a crap product and fails all the time.

I purchased a Whirlpool classic range model number rf263LXTS0 on January 2010. We had some hang-ups on the kitchen renovation and were not able to install the appliances until May of 2011.I used the cooktop that evening and was very pleased. I then went to use the oven 2 weeks later and it did not heat up. I asked the contractor to check things out (maybe it was something minor that he could fix). He checked the things that he installed and everything on his end was working fine, so he told me to call Whirlpool.A service technician came out and, within 10 minutes, said that the oven controls were defective.I paid $450.00 for the oven originally. The service technician charged me $136.74 for 10 minutes to tell me that the oven control needed to be replaced (that is the major part of the oven) and that it would cost me $318.41 to replace the part.I called Whirlpool and explained my circumstance and Paula, the supervisor from Tennessee, said that there was nothing she could do. I told her that even if I installed the oven back in January of 2010, the major part of the oven should last more than 1 and 1/2 years.What terrible craftsmanship and crappy customer service. It is sad that customer service cant stand by their product and Whirlpool has to rely on making their money on repairing defectives products. I now have to go out and buy a new oven. I also buy a lot of appliances in my business and I will never buy a Whirlpool again.

I just bought a new dishwasher because my 5-year-old one went out, model number DU1145XTPBA. After pulling the old one out, I took the motor out and lo and behold, what did I find but bad bearings. The motor was fine, just the bearings were rusted out and were jamming the motor so that it wouldnt move. The price of a new motor, $149.00. Well thats a bit much for something that only lasts 5 years. I went on eBay and found them for $70 to $170.00. So if you have a problem where your dish wont wash at all but fills up with water, it may be nothing more than cheap bearings in the motor. If I, myself, were this companys CEO i would really consider changing companies that they have making these motors or at least the bearings. Just wanted you to know that this is the only problem I have had with this one and Im going to replace the motor now that I know what it is. Thank you Whirlpool for a day spending repairing and replacing one of your dishwashers. I learned a lot.

On 1/24/12, I replaced a 15 year old water heater that had started to leak after years of faithful service. The new Whirlpool unit heated water to a tepid level only, and that was obtainable only after running several faucets at a time, full bore. I used the product manual to trouble-shoot and was unable to find the problem, so I called Whirlpool customer service and was told that I would need to have a plumber come and and inspect the plumbing before a technician could be sent to check the water heater. I was not very happy about that, but complied. The next day, a plumber inspected the lines and fittings, tested the pressure and agreed that the problem was likely a faulty water heater. That cost me $95.00. I called Whirlpool again. This time, I was told that I should have had the plumber call Whirlpool while he was still at my home! The customer service representative agreed to authorize a service call, and I was given the phone numbers of three companies to choose from. Apparently, I chose wrong. The plumber seemed experienced and was very friendly. He was at our home for about 40 minutes, made a cursory inspection and said the problem did indeed seem to be with the unit, and he would return to his office to contact Whirlpool and arrange for a replacement unit and he would call back. Tellingly, I realize in retrospect, he did not give me a receipt. After several hours, I called the company and was told Whirlpool had not yet called them, and if I did not hear from them soon, I should call Whirlpool myself. This seemed reasonable to me, and I did so, at which point I realized I had been lied to from the start. The Whirlpool representative said that the service technician stated that he had run an isolation test, obtained hot water from the water heater, advised the homeowner (me) that the problem was in the plumbing, and I possibly had crossed lines. She also told me that the technician had said that he had difficulty making the homeowner understand what he was trying to explain. A complete and utter falsehood. I asked her how an isolation test was carried out, and that I would call the plumber to see what was going on, as this was not what we had been told. I was livid and called the plumbing company back just in case there was some honest mistake. Of course, there wasnt. I would like Whirlpool to be made aware that the company that they contract with is disreputable and has a history of deceitful practices. I found many negative reviews, and in fact the sort of treatment I received seems to be their modus operandi, no receipt, never a call back, assure the customer their problem will be covered under warranty, misrepresent the the service performed. The reason I add this last statement is that at no time was the new water heater disconnected, drained, refilled and allowed to return to operating temperature; the so-called isolation test a process which Whirlpool told me takes about two hours. This test did not take place. I previously stated that the technician was only at our home for forty minutes. There was no test of water temperature. I have since replaced my water heater with another brand--it works fine and there were no plumbing problems! I thought the name Whirlpool meant something. I have owned quite a few Whirlpool appliances over the years, in fact my new washing machine is Whirlpool. But I am definitely disinclined to purchase this brand again. I am so disappointed with the service I received from Whirlpool, a huge waste of time and money, and I am out $95.00 for nothing. I think Whirlpool should reimburse me for this, as the original (honest) plumber was correct. My water heater was defective and should have been replaced at that time. If it had been, you would probably still have a customer.

Whirlpool fridge with serial # EL2427127 started on fire. Flame started on own but filled entire basement with electrical fire smoke. All terminals on compressor completely melted off. After researching online, I see Im not the first. Unbelievable.

I have been trying for a month to get my fridge repaired. 2 techs later and still nothing. The 1st tech never turned in his report and I was informed by your customer service that it was my problem and I had to try to track him down and get it turned in. Tech #2 just left my house. He walked in, stuck his arm inside the freezer and said feels cold to me. I pointed out the melted popsicles and that the ice maker was not making ice because the freezer is not freezing. He then said he doesnt have the tools to do the repair, if it can be fixed, and to call him back after the Holidays. I have been w/o a fridge since Thanksgiving... a month. And no one has a solution. I was sold an inferior product that has a manufacturing flaw but I have to suffer for it. $800 out of my pocket and all I get from Whirlpool is Oh Im sorry to hear that. We can send out another tech. The fridge is less than 6 months old and still under warranty. It is a defective product that Whirlpool refuses to stand behind. I guess they are trying to wait out the warranty period so they are off the hook and we are stuck buying a new one or paying the tech for the repair. DO NOT BUY WHIRLPOOL PRODUCTS! Go Samsung, my previous model.

We use a Whirlpool Washing Machine and it is one that came with this apartment provided to us by our employers. My parents had a Whirlpool Washing Machine too and they have had no problems since I have known them to use a Whirlpool. The Whirlpool that we are using has been very reliable in the past 3 years we have been using it. No issues whatsoever! The clothes do come out clean, so it does it's job! It is a top loading washing machine as opposed to the newer front loading ones. I have not used a front loading washing machine, so I do not know how it compares to them. The settings on our Whirlpool are basic and very easy to use. (If you know what you are doing, of course). LOL! Reliable is the word for Whirlpool!!

I purchased a washer model# wtw560xw, serial# c04830040 on 1/11/11. This product has never properly washed clothes. I have had 3 technicians come out and press buttons on my machine. The most recent supervisor I spoke w is Niki id# **. She said that the machine washes but is not supposed to clean clothes. I am getting blown off and aggravated. I filed a complaint with BBB that went nowhere. Someone from the corporate office named Amanda called me and told me she would look into it and a week and a half later, not return my call. I had to track her down for her to tell me she can do nothing! The hold times are always extended. I have a pile of ruined clothes and a pile that I am attempting to hand wash. I am beyond frustrated and need a machine that will wash my clothes. I am not in the 1800s. I should not be hand washing when I paid hundreds of dollars for this useless machine. I am ready to file a class action suit. I can be contacted at ** **.

On 2-26-13 I received my new Whirlpool Refrigerator, Model WRF989SDAE, KSN 4191832, 28.6 cu ft, french door for a price of $2500.00. November 2014, refrigerator stopped working. Though it was not under warranty any longer, the repair company advised me that the problem was a warranty item and repaired it at no charge. This process took several hours of work by the repairman and two visits. He advised that this is an issue with the refrigerator and Whirlpool is aware. Now, May 2015, only 6 months later, ice is building up on the back wall of the freezer and the freezer is running constantly and very loud. Bringing in repair person, hopefully before it stops again. Appears to be related to the initial issue. I cannot trust this refrigerator and would highly advise everyone not to purchase a Whirlpool refrigerator. Refrigerator needs to be replaced, not repaired.

I own a Whirlpool Cabrio. I wanted a newer technology (no agitator) washer with top loading capabilities. I ended up with a four to five-year lifespan with this washer. The bearings are busted and it leaks water from the bottom. I have followed loading instructions specifically. It will cost about $1,000 to fix so of course, I am buying another washer and a matching dryer.

I purchased a Whirlpool Cabrio washer and dryer. They work well but the washer underneath lid has rusted already. I did purchase the washer in Dec. 2011 and in June 2012 the inside lid to my surprise had rust on it. I called the Whirlpool company and was told that is considered cosmetic and not covered under warranty..

I purchased a Whirlpool Refrigerator with French Doors, Model No. GX5SHDXVD03. Within 1 year and 4 months, I had to replace the defrost control board. I spoke to Whirlpools customer service, George ** said he was sorry for my inconvenience but that he refuses to help in any way because I missed the warranty period by 4 months. I spent $352.74 for the parts and labor and lost hundreds more in food. Do not purchase any Whirlpool products. I was told that the boards have been going out frequently.

We purchased a Whirlpool unit Mod#WRF535SMBM from Home Depot in Bluffton, SC. Frost and ice build up in bottom freezer of our Whirlpool unit. We have had 4 service calls since our purchase of the unit in Dec 2014 (April, May, June and Sept) with one freezer door replacement due to a faulty door liner and soon to be a second freezer door replacement due to lack of insulation in the door, along with the door slides. Each service call visit is by a different service company. The other issue is the unit is advertised as S/S. This is the first time I have had a magnet stick to S/S so I figure that the outer shell is a mere coating of some sort and not a quality S/S product.

I was going to write a negative review after our Whirlpool stove oven stopped working. We only had it for three years. Technician’s visit today was $70 for the information that we would be better off buying a new one because the motherboard is gone. However, after reading all the horror stories which are already here, I realize that we are relatively lucky - at least, our stove worked for 3 years... Still very disappointed and unhappy. No more Whirlpool products!

After Hurricane Katrina, six years ago, the gas water heater in my house had to be replaced due to the house getting flooded. For the past six years, the pilot light and/or igniter for the gas water heater has had to be replaced if not once a year, twice a year because it will not stay lit. Each time, Whirlpool would send a new igniter and/or pilot light part and would reimburse me the cost of labor to have the part(s) replaced.Now, after six years and exhausted of fighting with Whirlpool to stand behind their product and make it right, they are finally giving me an authorization to get a new gas water heater. However, now they are telling me they will not cover the cost of labor for replacing the entire water heater. My plumber will have to pull the defective water heater out of my house, take it to Lowes, pick up the new water heater and install it in my home. And Im supposed to accept their not paying for the labor of replacing their faulty water heater? I questioned this and told Whirlpool they paid for labor for the parts to be replaced for the past six years. Whirlpool then said they would pay up to $100. This is not acceptable. I was reimbursed more than $100 for the labor to replace a part that fits in a shoe box. (Multiply $100+ times 6. They paid more than $600 over the past six years.) The cost to replace an entire water heater, picking it up from the store included, will cost more than $200, if not $300! I would not have to pay anything if the Whirlpool product was not defective!I told the manager I was speaking with at Whirlpool I wanted to speak with his boss or someone who had more authority than he did. He refused. I asked him, Was he telling me no I could not speak with someone above him? He finally said he would have someone call me.I believe I should be reimbursed for the entire amount of labor to replace the water heater since the water heater is a defective product and I have to have it replaced not by my choice but out of necessity and safety. If it is defective in one area, who is to say in trying to light the pilot light, one day it will not do something worse than just not light up. What if it decides to explode? Defective is defective and I feel my family is in danger from a defective product and it should be replaced at the cost of Whirlpool not mine.

Water heater was defective from the factory with a pinched wire between the thermostats. After replacing everything on the heater Whirlpool would not reimburse any parts or labor for the unit... Whirlpool is dead to me now, and forever and I love to tell my story to prospective buyers of their products!!! So far, to date I have cost them about 14 sales of major appliances (and still counting!!!). After reading some reviews… Im (sorry, I omitted the personal insults) in respect of your review guidelines.

I have had a Whirlpool washer for less than 1 year and have had it serviced over 7 times with drain problems - code A10 being displayed. Have not been able to resolve the problem with neither the dealer nor the manufacturer. What a lemon!

We bought a Whirlpool side by side refrigerator in September 2009 for $898, which was a lot then. Last fall the ice maker jammed and started dumping ice in the floor. Yesterday, we noticed that things in the freezer werent solid. After checking, we found our frozen food had thawed and things in our fridge werent very cold either. We called Whirlpool which was no help. Then we called a repair man who told us, “There was a leak in the seal system and it was low on freon. Would have to replace a compressor, evaporator and it would be better and cheaper to just buy a new refrigerator. It has just turned 4 years old. I called Whirlpool again and they said they didnt know why it went bad. I said is it a recall or just a bad refrigerator. The girl was no help at all; I kept asking to talk to a tech and finally asked for their corporate office address which she said was 553 Benson Rd., Benson Harbor, Mich. 49022. I now have to buy a new refrigerator and it will not be a Whirlpool.

It was on sale and the price was good for comparable refrigerators. The biggest problem is that instead of a simple dial to control temperature, you have to be a computer genius to figure out how to turn it to a different temp. even by the instructions. And the ice maker throws ice all over the floor even if you hold the glass up against the top. When I first got it, it made a very loud noise when it run, but that changed with time to a bearable volume. Everything seems to work well other than those few little things.

Less than 2 years after we purchased our whirlpool dishwasher, the rack started to rust. Now the tines are so soft they fall off. The last time we bought a dishwasher the Same thing happened, but after 15 years! They dont even have an option for that to be under warranty so it tells me they dont stand by their product. I will never buy whirlpool again.

This complaint refers to model number ET8MHKXMB. It was purchased in November of 2008 and the fan had to be replaced on May 29, 2012. The cost of this repair was $189.79. This is a terrible thing to have happened. Obviously, the fan was made cheaply. We are very dissatisfied and will not purchase another Whirlpool refrigerator ever!

Refrigerator ice maker quit working. This is replacement fridge for first refrigerator that quit working same model. This one has electrical burn marks inside behind a panel. Whirlpool says this is normal. How can burn marks inside a refrigerator be normal. If house or fridge catch on fire will be suing Whirlpool. Ice maker and water valve replaced. Still not working. Maybe it has to do with the burn marks.

Bought this refrigerator in 2018 and ice maker went out 2x, then compressor went out and waited 4 weeks for part. Now the refrigerator is broken again and not cooling. Dozens of other reviews indicate the same issue with this model. It’s clearly a defective model. Customer service in Tennessee are very friendly but my refrigerator is still not working. Whirlpool French door - wrf954cihm.

This machine cannot handle washing jeans, towels, blankets, pillows or anything bulky or very small loads. The load becomes ul unbalanced almost every time I try to wash a load. It has never gotten things very clean.

Overall, I am happy with my Cabrio BUT we purchased a Whirlpool WTW7000DW0 Cabrio top loading washer w/ electronic touch panel in May 2016. We experienced water hammer from day one. I finally had enough yesterday and knowing that the plumbing could be suffering (15 year old condo), purchased 2 Sioux Chief MiniRester, Model 660-H arresters (Lowes at $9.99 each) and had a plumber install them today. I could have but am nursing a fractured rib. Long story short, they work perfectly. There is NO indication elsewhere in the unit that water is even entering the tub unless youre standing right beside it.Ive been told that hammer problems exist in ALL high efficiency washers, all are prone to this problem. I was also told by a Whirlpool support person that the Cabrio is a Samsung design and the pulsing of supply water off and on, over and over is normal operation. If I had been informed when purchasing that hammer is a common problem, I would have installed arresters from the get-go. At the very least, manufacturers should include arresters as a part of the sale; installers should make sure that every new installation includes arresters. All told, I am out just under $200.00 for new technology that really could have been engineered out in the beginning.

Purchased the Cabrio top loading washer and dryer. Huge mistake. The clothes come out of the washer a tangled wrinkle mess. Have tried different cycles and water levels to no avail. Dark clothes have detergent streaks and lint. The dryer has a steam refresh cycle which Ive used to try and remove some of the wrinkles caused to no avail. Clothes come out with water spots. Ive only owned this dual for about 6 months. Take my advice and DO NOT PURCHASE!!!

I purchased a Whirlpool oven and stove from hhgregg. The refrigerator is at best OK. The stovetop is easily scratched and looks horrendous after just a few months. Cooking controls are far too high for slow cooking. Customer service is terrible. Avoid, purchase another brand. You will be much more satisfied.

We purchased a top of the line (we thought) Whirlpool stainless dishwasher 15 months ago from HHGregg. All was fine until 2 weeks ago - it produced a burning smell and was making a funny noise. We had it looked out. The motor is burning out. I called Whirlpool and explained the issue. There is nothing they can do. It is over 12 months. Really? They cant stand behind their product? I understand if it was a small part or such but an entire motor burning out in just over a year? I know that not all products can be perfect, some times mistakes slip through the line. I guess it was silly of me to expect a company in todays age to stand behind their name and product. Obviously, with this company, it is buyer beware.

We purchased the Cabrio Agi top loading washing machine in 2011 (3 years ago). After 2 years it started leaking from the plastic drum (Bearings?). Luckily we have it in the basement on concrete floor, so there was no damage, just frustration. This was poor purchase on our part. We should have searched for more reviews. The wash time is ridiculous; it is too long, an average of 50 minutes per load. I dont know about how clean the clothes were, I guess they were OK. I didnt notice a smell, or them looking dingy. The Cabrio is a piece of junk if the bearings went out after 2 years?? We just purchased a heavy duty Speed Queen, top loading, agitator washer. My wife loves this, its like the old Maytag we had. They told us they wont be selling these washers after next year. Buy them while you can. The Cabrio is headed to scrap yard.

Whirlpool Cabrio Platinum Washer - Worst purchase ever! Washer will NOT clean clothes. It leaves detergent residue on everything and I use liquid detergent. All of my husband’s dark police uniforms have grey powdery looking streaks on them after they come out of the machine. Does not matter how I load the clothes. The horrible results are the same. Even rewash and extra rinse, streaks are still there. This model, Cabrio Platinum was very expensive! Never buy a Whirlpool.

Purchased 2 years ago from Lowes with the matching dryer. This machine (Model #WTW8540BW0) has more problems than the Bosch front load that I replaced. All of my white clothing gets small rust colored lines on it. I am sure this is because the top of the bleach dispenser is lined with rust. I have never owned a washer that rusts (screws are also rusty). I will NEVER purchase another Whirlpool product.

It’s a great stove. I love the glass top. Only dislike about mine is that it doesn’t have the self-cleaning option. I’m very weak in arms and have back injury so bending over to clean it myself is not possible.

Refrigerator is good, keeps food at a good temperature, freezer keeps even ice cream solid. Only fault is draw in freezer does not hold as much as the old bottom freezer with separate unit for a draw. The refrigerator is nice looking and does the job. It just seems that manufacturers are always trying to make things better, but usually features were fine in older models.

I bought my Cabrio washer 16 months ago to service a family of 4 adults, 2 children and 2 dogs. Anything that has the slightest stain has to be pre-rinsed or pre-washed in the sink before going into the washer. Every load is an unbalanced load. Although the floor is perfectly level, the washer bucks and dances as though it is possessed. I never expected a $900 washer to be a piece of junk. I would love to be part of a class action lawsuit regarding this washer.

My refrigerator is 6 months old and already has rust and leaks. I am told it is because I live too close to the beach. Do not buy their sub-par products which come along with absolutely awful customer service. Will never purchase anything Whirlpool again.

Let me start out by saying that I had a Whirlpool washer that lasted me for over 25 years and done a great job of washing my heavily soiled clothes. One day it refused to run and I tried to get parts for it but it had become obsolete and no parts were to be found for it, so I had to buy a new washer. I chose whirlpool again and let me say that it was a huge mistake. This model is a low water, high efficiency, top loading machine. It has nubs in the bottom that agitate to clean the clothes. The first time that I used the machine, I found that I had made a mistake purchasing this machine. It does not clean the clothes and there is NOTHING efficient about this machine. I have to run the washer twice to clean my clothes and they are still not clean. It leaves soap in the clothes and does not rinse them clean of the soap. What it does very well is extract water from the clothes during the spin cycle. This washer really turns up the high RPM`s on spin cycle. It has ripped apart several of my shirts during spin cycle. Whirlpool really failed badly on this machine. I see clearly now that Whirlpool is not the company that they used to be back in the 1980`s. I still have the whirlpool dryer that I bought back in the 1980`s and it still works very well. To end this story, I loaded up this NEW WASHER in the back of my truck and took it to the scrap yard and I asked them to destroy it in front of my eyes. I wished that I had recorded the destruction of this piece of JUNK and posted it on YouTube for the world to see. I got over $450.00 of pleasure watching the crane operator completely destroy this pile of crap. GREAT JOB WHIRLPOOL … YOU HAVE LOST A CUSTOMER FOREVER. I WILL NEVER BUY ANY OF YOUR PRODUCTS FOR THE REST OF MY LIFE and will advise others not to buy Whirlpool products as well. I am a male, 62 years old and work hard for my ill spent money on your JUNK. Life is always a trial, live and learn the hard way. Warning to all consumers. Do not buy Whirlpool products ever!!!! Whirlpool can K.M.A!!!!

Purchased Whirlpool Cabrio top loading washing machine yesterday. When wash load is finished (dark load) white marks are visible on the clothing. It appears to be laundry detergent that has not dissolved. I am not happy with this washer and will be returning it.

I have had almost all the same issues everyone else who reviews the Cabrio WTW7800XWO washer. Now, the spring loaded lid wont stay up, so we have to use the Downy bottle to load the clothes. Thankfully, I have not had the lid crack... yet. We have had it serviced once while under warranty, that tech told us it wasnt good to wash small items, like socks. Are you kidding me? Now, the heavy lid falls on you while you are loading. I also have the Cabrio dryer, and we have fixed that more than the washer. DO NOT BUY A WHIRLPOOL CABRIO. We bought it because it was the largest unit in the store, but it is junk.

We bought a new Whirlpool side by side, model # WRS325FNAM00 in March 2014. In less than 48 hours, the freezer box was condensing and water was leaking on the bottom edge. The condensation got worse and worse. Five service calls later, Whirlpool replaced the freezer door--which took six weeks because it had to be manufactured.After the door was installed--no change. Whirlpool replaced the entire refrigerator in June. Guess what? The new one is doing exactly the same thing in exactly the same place. So far it has not gotten worse. Well see, we have only had it a week. But already the service rep has been out to the house and added the silicone gunk to the box in case there is a tiny air leak. Why would a brand new refrigerator have an air leak in the freezer box?

We bought Whirlpool duet front loading washer and matching dryer. In 3 years the water level seemed like it was off. Clothes, especially towels were coming out stinky. Eventually you could hear the clothes were merely flopping around wet. Before we could order the repair part it completely quit and locked our clothes into it. I washed my clothes at my daughters house for a week and dried them at home. Within the week the dryer quit. Not having the money to repair both machines, my son gifted me a set of top loading washer/dryer. Again Whirlpool. In a week we had repair service out. They replaced everything possible and it still didnt work right. Since the 90 days from purchase was approaching we returned it to the store and they had Whirlpool send us a brand new dryer. This one worked for a month then stopped spinning. I havent called for service yet because now with 3 broken machines I am so disgusted. When I think about them I feel like I am going to puke. My washing machine shouldnt be the worst thing in my life, especially since it was a lovely gift from a wonderful son.

Bought a Whirlpool dishwasher about 2 years ago. Used it once a day for one year. The bushings already need replacing (maybe $3 to make) and it’s $270 for the part or $280 for whole motor. Do the math. Not impressed.

We have ALL Whirlpool appliances in our home. This was our second home so we were not here to use these for a long time. We were preparing our other home and our parents home to sell. Our French door refrigerator is almost 2 years old and we live here now. My husband opened the icemaker door to see why we dont have ice. There was a wire in there. We called the local Whirlpool authorized service man and he said the wire is not hanging down to connect it. He tried to channel a new wire and said it must be crooked in there, he cant get through the insulation (no channel). He asked us if anyone had ever worked on it. We bought it brand new. Home Depot delivered, unboxed and set up. He said we need a new door. Whirlpool will not stand behind this! I am so disappointed! I thought I was doing the right thing. Good name, made in the USA. I was wrong! I definitely do NOT recommend Whirlpool!! I am so sorry that I spent so much money on 3 homes of Whirlpool appliances!!

I bought my new ceramic top electric range/oven with convection, and the aqua-lift cleaning system in spring 2017. The aqualift cleaning function is a joke, so be prepared to be down on your hands and knees scrubbing. Im careful, and Ive not spilled anything yet, but the oven still gets splatters from roasting meats, etc. Id hate to see what Ill have to deal with when I actually let something spill. Today, as I was down on my hands and knees trying to clean it, I noticed that the enamel is chipping off where the oven racks slide in. Great. I have never had an oven where the enamel came off, much less within a year. I am struggling with heart failure, and I am not up to fighting with Whirlpool.

The washer itself doesnt get the clothes clean. The clothes on top never get clean, they smell. It doesnt spin out the clothes evenly even though I put them in evenly. There is oil on my floor under the washer and Rent-A-Center doesnt care and its under their Benefits plus program. They were to send off both washer and dryer last time and had no paperwork where washer was sent off at all. It has ruined a lot of my clothes with spots and I used the Tide pods. Stopped using them cause they were not working. I will never buy another Whirlpool product or appliance. Water pump went out in one year... Why would you not care about your customers... I got this set in 2013 and its the Platinum line triple top loader. You lucky to do one load at a time, a single load that is...

Just like many other reviews about this brand - our microwave went bad after only 14 months of using it. Initially the door sensor would register - it wont operate even if the door is closed. Or it will keep going even if the door is open. I contacted BBB and the Whirlpool corporation regarding this safety issue. I pointed out that the safety mechanism is faulty and they should recall all of those models that have similar issue with door sensor. This is extremely dangerous for households with kids. There is a reason why this safety mechanism is mandatory in all microwaves! Whirlpool pointed out to me that I should not try to operate microwave with open door and refused to take any responsibility. Ive owned probably 10 different microwaves over the years and NEVER had micro go bad after only one year, yet alone have completely faulty safety mechanism. Consumer beware!

I bought a Whirlpool fridge 4/23/2013. Thanksgiving it went out. I had a repair company come look at it to see how much it would be to repair. He said the compressor was out, it has a freon leak, and the electric board has a relay that is acting up. Basically it would cost $600 or more to fix. I only paid $750, mind you. Whirlpool customer service said if we pay to have it fixed then send them the paid receipt. They would then give me a 6 month service plan for future repairs if needed. Please tell me how that helps me now? A voucher for $200 or offer something to help me now. Not a happy customer. Thanks for nothing Whirlpool.

I bought a Whirlpool top load washer. In less than a month it had to be serviced by their recommended service repair. It has never worked properly. It malfunctions almost everytime it is used and takes at least an hour to wash even a small load. At first I thought I may have acquired an odd lemon. After talking with several friends who had bought the same Whirlpool model I found we all had the same complaints. My old machine could wash a king size comforter in 36 minutes... that was energy efficient.

Extremely quiet machine. I love that the silverware wrack is situated across the front of the door giving plenty of space for lots of silverware. This leaves even more room in the already large washing area for pots, pans, dishes, bowl, glassware & more.

In 2011, I bought in Croatia, for the start, 2 washers (model 3LCHW9100WQ) and 1 dryer (model 3LCED9100WQ) and opened the first self-service laundry in Pula, Croatia. Since the beginning, I had problems with the gum (black). After the washing cycles, you could see black lines on the laundry. Whirlpool Croatia denied that the gum can be the cause. After two months, they gave me new gums, but the problem still exists. After 5 months of work, the first malfunction on the washers started. The biggest problem is that it took and still takes them up to a month to repair them. And these problems I have ever since. Also, the error codes never showed the correct malfunction code. In global, if I take that I have these washers and dryer for about a year, they were out of function for more than 3 months. The warranty expired in April 2012. On these reasons, I cannot recommend any product of Whirlpool, and I have to change to another company to buy more washers and dryers.

We bought a Cabrio washing machine two years ago. I have had to have a repairman out twice for it shooting water out of the top (from a top-loading machine). They repaired that and its better. But this goes off balance ALL the time. I cant even wash a load of towels without it going off balance. We bought this one as it was supposed to handle large blankets and even my lightweight king size comforters. Yeah. Did once or twice, then started the off-balance stuff. It grows MOLD in the bleach, softener, and detergent dispensers.I wrote to the company and included pictures. They were really rude about it. I finally found how to remove the dispensers to clean them, but it is very difficult. I HATE this machine and will never buy a Whirlpool again. (Our refrigerator, which was in our house when we bought it, is also a Whirlpool. It is poorly designed and collect dust in the coils UNDER the thing and you cannot reach them to clean it. Coils are behind other pieces that block being able to clean them.) Whirlpool is a horrible company and doesnt stand behind their products, in my experience.

My washing machine ruined clothes with tiny rips. Small rubber pieces appeared in clothes. This happened during warranty but Whirlpool would do nothing. Finally, the bellow completely broke apart after 13 months. Repairman could not determine problem until this time. Whirlpool would do nothing.

First whirlpool 3 door with ice maker in door failed in less than a year. Took 6 months to resolve issue, several service calls, at least 30 calls to Lowes and Whirlpool with little or no response. Nobody wanted to take responsibility to do something about my broken fridge. Even the authorized repair guy didnt want to touch it, didnt want to ruin his reputation because they wont stay fixed. Another service guy wanted to take it to the shop to repair, of course I would be responsible for pickup and delivery charge. Found out the repair was an in home repair, so didnt use that guy, I felt like he was trying to rip me off.I finally got to the right people in whirlpool organization and they replaced the fridge, that took another two weeks. I found everything takes two weeks. The replacement was supposed to be same model with upgrade, this is gold series fridge Ive been talking about. New fridge has failed also, seems like same symptoms. It lasted 1 yr and 4 or 5 months. I guess not too bad for a top of the line refrigerator, made by Whirlpool. Gonna give them a chance to make it right or I am considering hauling it around in my truck with a sign on it. Not trying to punish the distributor, just Whirlpool. This product is so bad the government should step in and force Whirlpool to give money back.

I purchased my Whirlpool Duet washer about 14 months ago. After about 8 months, I noticed that it had started leaking. It was under warranty and the seal was replaced no problem. I then started to notice that my clothes were getting small tears in them. Around January (13 months after purchase), I got tired of finding new clothes and jackets with rips and tears in them. I finally found that the plastic piece around the entrance to the washer was rough and jagged. I called Whirlpool and they told me they could send out a service tech to file down the jagged edges. They told me this was a common problem caused by the zippers on jackets hitting the plastic and causing it to become rough. Because it was one month out of warranty, I would have to pay for the service call. The lady told me I could try filing it down myself. I feel like I should not have to file down anything 14 months after purchasing a new washer. I feel like I should not have to worry that my clothes are ruined every time I wash them. If this is a common problem as the lady told me, it appears to me to be a design flaw and should have a recall. I have lost several outfits and jackets due to this machine and I am very frustrated that Whirlpool would not stand behind their product.

The French door fridge with the freezer drawers on the bottom are very flexible and easy to access. It goes downhill from there. The ice maker takes 4 days to fill up the bin with no use. The unit does not defrost and freezes up every six weeks requiring a manual defrost. Three mods have been made under the service contract and performance has not improved. PC boards have been replaced and at least one thermistor. My understanding is this is a single compressor unit with piping, relays and valves to port refrigerant to two different evaporators as needed. Unfortunately it simply does not properly balance/defrost and the freezer door freezes up. It certainly is not compatible with a high humidity environment. We will never buy another cooling design like this, but sure like the French Door layout. Glad we have a service contract.

I purchased a Duet Front Loading Washer (model WFW9750) in May 2010. In September 2011, the noise level had become intolerable. I called a local service company. They advised me that the main bearing was bad. It would cost more to repair than what it was worth. I contacted Whirlpool. They could not do anything unless the machine was inspected by one of their authorized service companies, which they scheduled. Two weeks later, A&E Factory Service arrived and confirmed that the bearing is bad and the cost to repair will be $1,542.06. Whirlpool customer service transferred me all over the country to tell me that the machine was out of warranty and there was nothing they could do.

We have owned refrigerators for over 40 years. Never had one as bad as this. Three ice maker replacements lasting maybe from 6 months to 2 years. Cap that off with customer service people who by voice and tone could not give a rats ** about helping the customer. Today it took me from 3:10 pm to 5:30 pm to get a real person on the phone. When I did the attitude is so reminiscent of a fast food hamburger joint with arches. Yes they know the refrig and ice maker are and have been a problem but they don’t care cause we have no option. Whirlpool will NEVER SEE ANOTHER penny of my money. Time to look at real appliance makers. Horrible.

Love my new fridge, not in love with the icemaker though. Every couple of days I have to reach in and scoop the ice off the little shelf in the back, or else it will quit making ice. The ice cubes block the arm from coming back down to trigger a refill.