My double ovens were locked and I could not open them. A repair man came, undid the latch, but did not have the replacement part. He ordered it and came back two weeks later to replace the latch. I paid the required $159.00 for the service call. In the meantime, I could use the bottom oven without any problem. He replaced the latch and discovered it was defective. In removing it, he damaged the ribbon in the control panel. He came back and put in a new latch, but now neither of the ovens would work because the control panel was inoperative. An attempt was made to order the control panel, but the control panel is no longer made. Instead, an attempt was made to repair the control panel. This took 4 weeks, and meant that I did not have an oven for Thanksgiving and had to totally rearrange my plans. Now I am told that the panel is not fixable and the best they can do is offer me a prorate on a new oven in which I would be charged $1374.00. I find this outrageous. Except for the latch, an easily repaired mechanical problem, the ovens were in excellent working order. Now I am being told that due to the problem caused by their repair person, I must pay $1374.00. I spoke to Stephen **, their customer service supervisor, who said that I have no further recourse with the company and there is no one else I can speak to regarding this problem.

The washer is 5 years old and the dryer is about 12 years old. I have a Whirlpool Cabrio HE washer and a Kenmore Atlantis dryer. The dryer is relatively quiet and has 4 heat settings (including no heat) as well as multiple choices for the type of drying, i.e. wrinkle release, damp dry. The HE washer is noisy and a load of clothes does require a much longer time period than a standard washing machine. My guess is youll spend what you save on water usage for the electric power required to run this type of machine.

Our new home came with brand new appliances. I love our Whirlpool microwave. Its reliable, quick & has lots of great pre-programmed features to assist with regular. The independent timer is a total bonus too.

In 2012 we bought three new Whirlpool kitchen appliance back in 2012. The refrigerator has needed a drain pan replacement, and two air diffuser replacements. Of course, both air diffuser issues occurred just outside the one year warranty. Then the range oven has required two spark modulator replacements – again just outside the one year warranty. Whirlpool’s solution: buy another 1 year warranty to get it fixed; or buy a new Whirlpool appliance at a discounted price.

I am very happy with my Whirlpool appliance- oven. Ive had it for almost 5 years, with hardly any issues. -Its very user-friendly when I need to program any cooking instructions. Both the elements & the actual oven cook everything to a perfect.

Ill never buy Whirlpool appliances again. I purchased all new kitchen appliances less than 3 years ago. The range had electrical issues within the first year, which was extremely scary. Thankfully because of the warranty they took it back, reimbursed me for it and I replaced it with a GE. I absolutely love the GE. The dish in the microwave never stays on its track in the center. Its quite an inconvenience to fix it almost daily. The top rack in the dishwasher constantly breaks, drops down on one side. Random parts from inside the dishwasher constantly come loose and fall off. But the worst of all....my refrigerator has broken down twice in 6 months from the same issue due to no fault of my own. To give some credit, Whirlpool fixed it out of warranty the first time. However the same issue happened 6 months later and they are expecting me to pay for it. The repair company contracted with Whirlpool covers their parts under warranty, however different parts need to be ordered. I had to pay for these parts, a service call and labor. Whirlpool came out with a service pointer on this because they know its a manufacturing defect but are refusing to cover the cost. The representative I spoke to was nasty and inconsiderate but sadly the manager was even worse. DONT buy Whirlpool!!! I recommend GE, youll be much happier. Worst customer service and support.

We have front loaders. Far, far less damaging to the clothing than a top loader with agitator, would never go back to top loader. That comes with a caveat though. There is a difference you may not realize between the two styles. With a front loader comes a little maintenance. You will need to clean the washer periodically. Most all the stores sell the cleaning tablets and no, not all cleaners are created equal. I will only use Affresh after testing most of them. With a front loader there is always some water in the bottom of the drum, even after the cycle ends and even when it looks empty. So if you wash real dirty or smelly things, you’ll want to run an empty cycle to rinse out that leftover water or run with cleaner.In between wash days you’ll need to leave the door open so it doesn’t mold or mildew. The door gasket/seals will show mold and mildew and or you’ll get a mildew smell in your clothing. The only issues we’ve had with these units were the learning curve on front loaders in general and with the dryer we had the water valve for the steam function stick open (after 5 years) but it was due to calcium build up from our well water, not a issue with the machine itself.The dryer lint screen could be better. It is vertical so as the lint builds up during a cycle it drops to the bottom and accumulated at the bottom falling off as you pull it out each time to clean it. The lint catches on a crazy amount of extrusions inside the lint trap which also makes it nearly impossible to get down in and effectively clean all the crap out. One last thing if youre changing from top to front loaders. Buy the peristalsis, they’re expensive but it’s a pain in the butt to get stuff out if you don’t have them. Overall we’ve been very happy with our Whirlpool front loaders and would confidently recommend them to you.

In June 2010 my wife and I bought a new Whirlpool water heater (model ee2h50rd045v). As I have fairly extensive experience in both the electrical and plumbing areas (was head lab technician for an aquatics lab for 7 years and worked with maintenance on a farm for 10 years), I installed the unit myself. Two months later the motherboard fried. Whirlpool sent me a replacement and all was fine. Six months after this the motherboard fried and set the unit on fire. Luckily I was home and caught it before it got out of hand and the circuit breaker had tripped when this happened (the circuit breaker saved the house).After I had ripped the smoldering unit out of the garage I immediately called Whirlpools Customer Hotline and told them what happened. They said they would send me replacement parts. I reminded them that the motherboard had fried once before and that this time the unit had almost cost me the house. I also informed them that I have now worked for Lowes for 4 years and I am responsible for selling their product (in addition to other brands). The lady stated all they could do was send me new parts and the problem probably was with my circuit breaker. I informed her the circuit breaker was tripped so the problem was not there. She reiterated that all they could do was send new parts.The next day I started to remove the control panel and motherboard to find that the plastic had fused itself to the frame and insulation. I called the customer hotline and spoke to someone new and informed them about the new problem with the melted plastic. I was told that the melted plastic could be scrapped off safely and that since the problem was not the circuit breaker, the problem must have been how the wires had been spliced from my conduit into the water heater. The gentleman then proceeded to tell me how to do it in violation of Maryland code and told me he would have replacement parts sent to me. I checked with a certified electrician to make sure my wire splice had been done in accordance with code and he verified I was correct.I then had a Department Manager call Whirlpool. He was given the same runaround and told the parts would be mailed to me. He was also given the story about how the malfunction was due to the wire splice being too tight. He then asked to speak to the representatives supervisor and she told him she would not transfer him over to her supervisor. I have forgotten to mention that 2 months prior to this, a Whirlpool water heater (same model) had been returned to my Lowes store within the 30-day purchase window. The unit had caught fire. Since I had had problems with my unit motherboard at this point, I took that unit apart to see what had caused it. The problem started with the motherboard in that unit also. This is unacceptable. Whirlpool obviously has product quality issues.Sometimes bad units are put out. This happens with every brand. But when the same model has such a high failure rate and is known to catch fire, Whirlpools actions are inexcusable. Currently my refrigerator, oven, dishwasher and obviously the water heater are Whirlpools. I will not replace either of these units with a Whirlpool when they reach the end of their operational periods. Also in the future when customers ask me about Whirlpool appliances, I will be sure to tell them just how great Whirlpool is, how reliable they are, how great their customer service is and then quickly usher them over to Samsung, Frigidaire and Electrolux appliances. The department manager that had called Whirlpool for me has shared similar sentiments about future customer recommendations.

Very durable. Not pretty but will last a long time. The dishwasher will run forever. The appearance is bland so the product is nothing fancy. It gets the job done. The machine is very quiet. I think this feature is the best one.

It looks like I have the exact same problem as everyone else. Purchased an Energy Smart Whirlpool water heater at Lowe’s. Now I need a new controller. Hope they send me the non-catching fire type of controller.I am going to predict that the company will provide a response that says something like” “Hey, we really want to help you get your hot water back! Just contact us privately so we can discuss this without everyone being able to see what we tell you to do.” So far we are just out of hot water while we went through their diagnostics. They told me that this often happens and the best way to fix it is to let the hot water run in the shower for 20 minutes, then hold down the reset button on the controller for 5 seconds, and do that every time I experience this problem. I hope mine doesnt catch fire. Fire is bad.

I purchased a Whirlpool Water Heater Model # ND50T122-403 on March 4, 2011 from Lowes. I had it installed by Lowes and it included a 12 YEAR Manufacturers (WHIRLPOOL) WARRANTY, plus I purchased an additional 11 YEAR EPP (Extended Protection Plan) WARRANTY. About 3 weeks ago I had no hot water so I went down to my basement to check the water heater and it displayed 7 single blinks followed by a 3 second pause, which is a flammable vapor sensor lock-out code. I made sure there was no flammable vapor in the area, turned off the gas and pulled out the plug then called Lowes since I have an active warranty with them. They said I had to wait 3 business days for them to call back to set-up an appointment to have it repaired. I waited 3 business days including the weekend and no one called me back by the end of the 3 business days, so I called Lowes back and they set-up an appointment for a video store owner with a plumbing license to come over and try to fix it. Finally I thought I would have hot water after over 2 weeks without it, but the plumber started taking it apart and about an hour later said he needed to order a part and he would be back another day when he gets the part. He came back 2 days later to install the part and fix it, but he could not fix it. He called Whirlpool to report the issue and Whirlpool told him they would not honor the warranty because my basement was not safe. He then told me he would call Lowes to let them know about Whirlpools position and call me back. So when he called me back he said Lowes said the current warranty was under Whirlpool and their warranty was only effective after the initial 12 year manufacturers warranty was up, so they would not help any further. So after only 4 1/2 years with a 12 year manufacturers warranty and an additional 11 year extended protection warranty that I purchased from Lowes, Whirlpool will not honor the warranty that came with this water heater. I am going to take this to small claims court. Whirlpool and Lowes have terrible customer service policies. I will NEVER purchase another Whirlpool product and I will NEVER again shop at Lowes. Please do NOT EVER buy a Whirlpool water heater! TAKE YOUR CLAIM TO SMALL CLAIMS COURT FOR SATISFACTION! Maybe an attorney will put in another class action suit against Whirlpool and/or Lowes.

Whirlpool Gas Range model GW397LXUB1 is a lemon. We bought our house new in 2008, and it came with Whirlpool Gold package appliances. Within a year, the console buttons quit working for the oven, and we had our warranty fix the console. Within another year, it happened again, and then again last November and now again this week. This range is obviously defective, yet the only solution was to buy for $350, a one-year warranty from Whirlpool. I asked if they had any sort of redress or rebate if we bought another unit, which they reported no. So I looked online for other people who have had similar issues, and counted at least 75. So this company knows they sold defective units, but wont stand behind them without substantial cost. All this simply assures me is that Whirlpool is NOT a stand-up company, and I can assure you that Ill never purchase any product from them again.

I purchased the top-of-the-line Whirlpool Cabrio washer and dryer. My washer is 6 years old and will not complete a wash cycle. According to the repairman, the drive shaft is stuck and it will cost $500.00 to repair it. When speaking with Whirlpool, their suggestion was to buy a new one and get an extended warranty. This company is a total disappointment.

We got a deal on our stove/dishwasher combination, establishing a payment plan upon purchase. And as a bonus, when you have a brand name appliance like Whirlpool, that made us more secure with the purchase.

I purchased two Whirlpool refrigerators 9 years ago and this year, 2018, both of them died. Bad compressors that cost up to $700 to replace. Repair folks would not guarantee them as there could also be other issues, like leaks in the internal parts of the refrigerator. I have a 20 year old frig (Kenmore) in my garage than runs great, no repairs and is in a non heated area. My conclusion is that that Whirpool reduced cost by making cheap products.

I purchased this range/electric (ygfe461lvq0) two years ago. It worked fine, but once about a year ago, the oven overheated and the breaker had to be turned off to stop it. No error codes were displayed. Year two, the oven broiler element stays on regardless if using bake or broil. Oven will go into runaway mode and breaker or cancel button has to be pushed to stop it from over heating. This range is a fire hazard and should be recalled regardless of what age it is. I called Whirlpool at Sears which recommended a tech who arrived to tell me that the control board is shot and for a price of around $400.00, it could be replaced. What is up with that? I had to pay for the expensive tech, also for 15 minutes of work. Sears says that I should have taken the extended warranty plan for around $160. Do I have to pay for an extended plan to have my house burned down due to a defect in manufacturing from Whirlpool? This is disgusting that a company can get away with crap like this. How do you people sleep at night?

I have had my washing Machines since 2011 and have had continuous problems with the washing machine during spin cycle sounding like a freight train going through my house. Whirlpool has had people to my house 5 times to fix. When warranty was up in 2012, I was told they would continue to cover this particular issue. They came out again in April 2013 and now I am being told, Too bad; if you want fixed then you will need to pay for it.

We purchased our home in 5/09. Within a month, we had to replace the defective gas valve due to inefficient burning. Our house smelled like gas each time we used the oven. It was under warranty at that time so Whirlpool replaced it. It is now 5/12 and out of warranty. We called a local independent technician who informed us the oven wouldnt turn on due to another issue with the gas valve, the same one that had been replaced shortly after we moved in. He went to his local supplier to purchase the gas valve to be informed that they couldnt seem to keep this particular gas valve in stock, simply because its a reoccurring known issue and Whirlpool needed to do something about it. So, this technician encouraged me to call Whirlpool. I called the 1-800 number, spoke to 3 different people and was constantly informed that since it was out of warranty they would do absolutely nothing! Again, I was informed that this gas valve is a reoccurring known problem with Whirlpool so perhaps they should consider looking into this issue. The last person I spoke to was a bit snide and just kept saying It is past your warranty, we will do absolutely nothing to help you, and sorry you are having that problem. We are not aware of this reoccurring gas valve issue. Have a good day!” Whirlpool, do you understand your reputation is at risk when you dont want to stand behind your parts that should work after 3 years! Should a brand new part not work properly after a month? Should another service call have to be made after 3 years? Sounds like a quality issue, something Whirlpool needs to investigate especially after a local supplier states they sell this particular gas valve all the time due to a reoccurring issue.

We purchased Whirlpool Gold Accubake, double ovens (gas) in 2005. Since then, we have experienced identical failures (8 to date) during the self-cleaning cycle in which the high temperature burns out the thermal fuse of the ovens. This requires two Sears technicians to repair the unit (it requires two technicians to pull the oven out as the fuse location is in the back of the unit) and leaves us without use of both ovens for approximately 2 weeks (scheduling parts delivery and technicians through Sears home repair is not an expedient process).After checking other consumer product websites, it has become clear to me that there is a known design defect with these ovens in which the thermal fuse is not adequately insulated from the high temperatures during self clean; it therefore trips and burns out during the self-clean cycle. While not having access to ovens for about two weeks/year on average may sound acceptable to Sears, the reality is that the problem has escalated in frequency since purchase. In 2013, we are going on our third repair of the same problem (that makes 6 weeks of non-usable oven time in one year) and Sears will not consider replacing the unit, despite: 1) our obvious dissatisfaction with a lemon unit, 2) a well documented history of the defect with this particular Whirlpool oven and 3) an ongoing and escalating repair cost to Sears (it is under their extended warranty so the repair cost is on them although we did pay for this service up front on our appliances).I would stay away from not only Whirlpool appliances but also Sears as there doesnt seem to be any regard for the customer experience and taking care of a product problem (the right way) with a known defect. Sears has an opportunity to make this problem go away quite easily and retain a customer - fix the problem permanently or just replace the defective unit. Unfortunately, my experience to date with Sears standing behind the products they sell provides me with little confidence that either will happen.

I purchased a new park model house with Whirlpool appliances. The fridge door is crooked in 2 directions. It is only adjustable in 1 directions. Top to bottom. After 5 months of trying to deal with whirlpool and being told my warranty is void because of adjusting the door according to their manual. They also tell me that warranty will not cover factory flaws which the crooked door obviously is. Whirlpool will never darken my door again except on the way out. Whirlpool sucks!

We purchased a Duet washer in Feb 2011. On Nov 2011, it started making a very loud noise when it would spin. We contacted the warranty company, not realizing it was still under the manufacturers warranty. The warranty company came out and took a look and claimed it would be about $1500.00 in parts to repair. We contacted whirlpool and they also sent a service person that claimed the same thing. Both service people claimed that the other did something to the machine and it was the others responsibility to fix it. We have contacted whirlpool and the parts have been ordered. We were informed today that they are on backorder and will not be available until some time the middle to the end of January. When asked why they just dont replace the washer, the answer we received was that was not the policy.

Was baking a pie when suddenly noticed the electric range had caught fire underneath the bottom of the oven. I could see partially through the slits inside that the heating element was on fire. Could not get to heating element as it covered. Shut the door and turned the oven off so the fire would die out. DO NOT BUY THIS PRODUCT. I was baking pecan pie. Whirlpool is no longer a quality brand. Washing machine bought at the same time has been repaired twice since owning. Also, Aqualift technology is a joke. It doesnt remove any messes burned during cooking. I wish Id stayed away from this complaint. Bought a stove, washer, and dryer. Dryer has been the only appliance we havent had a problem with. We saved over a year to ripped off by Whirlpool. I expected a washer and stove to last far longer than 3 years. Actually would be 3 yrs come December. So disappointed.

I bought a whirlpool 40g gas heater with the Honeywell gas valve. In 5 years Ive had to replace the valve two times. Thankfully the valve was under warranty both times. Our old water heater was Twentynine years old before it started to leak, this new electrical diagnostic high tech gas valve keeps breaking showing a overheated error and the only way to fix it is a new valve that only Honeywell sells thats well over 100$. Talk about a scam!!

I bought this stove 4 years ago from Lowes. I have had nothing but problems ever since. My family is now afraid to use the stove and Whirlpool refuses to stand behind their product. The last straw was a bill for a service call that took 6 months to complete without correcting the problem. Whirlpool sent me a bill for $100 to pay for the privileged. When I complained, WP said if I paid the invoice, they would give me a deal towards a new stove. Meanwhile, the old stove does not work and we are afraid to use it, given our experience with its reliability and safety. I plan to return it to Lowes and buy anything but a Whirlpool product. Beware of Whirlpool Maytag anything!! The customer service is shameful!!

6 months after we moved into our new house our Whirlpool refrigerator froze up and we had it repaired. 6 months later the same thing. Still under warranty. 6 months later the same thing. I asked for a new refrigerator. They said it could not be replaced unless it was deemed unrepairable!!!! Now after 2 years with the same problem every 6 months I get in contact with corporate and advised to get an extended warranty because “they don’t replace refrigerators”. So an extended warranty will cost $350 this year and increases every year because the fridge is over 1 year old. Ok so I am paying to have it repaired with their so called warranty!!! We went to an appliance store and purchased a new not Whirlpool refrigerator. Will never buy anything Whirlpool again and let all my friends and family know of my experience.

I feel that at the end of the day I do owe Whirlpool a good feedback. Our top load washer stopped rinsing so I checked the clutch, agitator dogs and coupler which all looked brand new. So I thought Id take the trans apart and after pulling the plastic agitator out I noticed the tub had completely rusted in half! The tub dropped down about an inch. The agitator would spin but the tub just sat there. Now came the difficult part. I told them I was quite sure about my diagnostic that it needed a new tub and told them I could send them a video (I even posted a video on Facebook and Twitter). But they said they would have to send a man out at $180 to make sure! After several days of back and forth conversations, someone at Whirlpool finally saw the video and agreed to send us a new tub. I havent gotten it yet but have heard through the grapevine that these tubs were supposed to be replaced if rusted because of the quality of metal used? So other than pulling a few teeth and needing to replace the tub, our washer has been a pretty good machine.

I bought my Whirlpool Cabrio washer from Lowes in Statesboro GA on 2-14-14. I did purchases an extended warranty on it. After 11 months is when I started to have my problems. I was washing my clothes. I did not hear my beep on my washer. After 2 hours my laundry should have been done. I stopped on the wash cycle and shut off. I put it on the rinse cycle thinking it washed my clothes. It shut off during the rinse cycle. I called the Lowes repair. ** was to come the next day, He did not show up. I had to call again. It took 2 more days before he came out.It takes over 6 business days before I get my part. I have to have my laundry washed else where. It did the same thing again. I called. ** came out. He ordered the other part. It took 7 business days. It came in Tuesday. I tried to wash my daughters comfort on Wednesday. It did the same thing. Shut off during the wash cycle. I called at once. ** was to have been here Thursday. He never showed up. I called Friday. They said hell be there by 5. He still never showed up. I called back today .This time ** called me. He said, “So you tore it up?” I said, “NO it’s still doing the same thing.” He said hell be here tomorrow between 8-12. I am so tired of this washer. I even asked if I could get a replacement. They said no. I said this is stressing me out. I am on anxiety pills already. This is not doing any good. I paid all the money for this washer and it does not work. I have to arrange to have my laundry done some where else. All they said was sorry.This is the worse washer to buy.

I have had my fridge (model WRX735SDHZ02) for 6 months now and it has never worked properly. All our food was getting frozen so we bought a thermometer to check the temperature inside the fridge and it was showing around 22F. The technician came 4 times and finally said that the fridge couldnt be fixed. He asked me to call Whirlpool since there was nothing else he could do. Every time I have called Whirlpool (6 times already) the wait times have been between 52 minutes to almost 1.5 hours. When I called customer service to tell them the technician said the fridge cant be fixed, Whirlpool said that I had to contact the technician again and schedule another visit. Whirlpool said the technician had to call them from MY home and tell them the fridge cant be fixed. I asked why couldnt the technician just call them now to let them know and why did I have to schedule another visit for that? Whirlpool said it was protocol. Makes absolutely no sense. In a nutshell, its been 6 months and my fridge is still not fixed and Whirlpool is not being helpful. If I could go back I would not buy Whirlpool.

We bought a fridge in November 2013. Brand new, paid about $2400. After a few months, the fridge wasnt keeping our food cold, was leaking from the ice maker, and wasnt making ice. I called for a repair and about a week later they sent someone out. He assessed it, then came back a week after that to replace the part. Within a month or two later, the same problem. I called for service and was set up with a new company. The repairman called me a couple days later and instead of setting up a time to come in, he says its a common problem, he knows whats wrong, and he will order the part and call me next week to come replace it. A week passed, no word. I tried calling the man back, left several voicemails, and no answer. After another week, I call whirlpool again and tell them I heard nothing from the man and at first they tell me they cant do anything with it since it is an open ticket and I tell them thats not okay. They need to close it, he never even came to the house and assign it to someone else. After they tried multiple times to call the repair company themselves with no answer, they assigned it to a new repair company. Again, it was assessed, a part was ordered and replaced another week later. So now its been well into 9 months of having a worthless fridge. A few weeks after that part was replaced, the problem was back and I called again for repair. I was told if this problem is not solved this time I would be eligible for a replacement fridge. Obviously, it did not work so I called to have a replacement fridge at the end of August. I was told that someone would call me to set it up in 5-7 business days but maybe a little longer since Labor day was right around the corner. I waited, patiently. I called every few days for weeks until mid October and kept getting told it had not been assigned, they are really backed up, it will be just a little bit longer and they will send a message. Mid October, my sister in law called for me and she was told that it was denied because I had not had it serviced within the last 4 weeks. WHAT KIND OF ANSWER IS THAT??? Thats like putting salt on a wound!! I have had spoiled food, constant clean up of leaks, and constant wasted calls to get told that it was denied because it wasnt serviced in the last 30 days while I was waiting for a response from Whirlpool??? So of course I grab the phone and go off. They agree to reopen the case because it was denied for a bad reason. At this point, as I type this, I have been on hold for 55 minutes to speak to yet another supervisor because it has been 2 and a half weeks since they reopened my case and I am told it has not been assigned and the best they can do is send another message.

Bought set 12/5/14 at Lowes Tucson. First load came out with shirts looking like theyd been scrubbed with sandpaper. Called Whirlpool & was advised to use higher water level for loads. Then noticed small hole in my favorite shirt. Oh well. Next I found an area in my king sized bottom sheet with several holes and torn fibers. Thought maybe it might be from my toenails, except it wasnt where my feet would be. Finally a pair of capris (just worn twice) found with same type of holes and torn fibers. Dryer also inefficient. Balls up clothes - outside dry; inside wet. Re-run one or two inside wet pieces and they dont dry at all! What kind of technology is this?

Whirlpool Washing Machine Model WTW4950XW2: I am 74-1/2 years old and I have been doing laundry for more than 50 years. We have always purchased washers of a brand made by Whirlpool. Until now Ive had nothing but the highest of praise. Two months ago, our washer stopped working and we had to shop for another. After looking at all types and brands of washers, we found out that the only type without an agitator was available. With that choice, we ended up buying the model stated above. I literally hate the way these washers pretend to wash clothes! I apply the detergent properly, place the clothes perfectly around the outer part of the tub, etc., and because there is not enough water that goes into the tub for the clothes to wash even one pair of socks, let alone a full load of clothes, I use the 2nd rinse trying to help matters although it doesnt. I dont care about the amount of the water I use to have clean clothes! The clothes sit in there just rubbing against one another, and then when they are finished, the clothes are so tangled you can hardly get them out of washer and into the dryer! Perhaps the designers of all these current washers think they are saving water, but I can tell you that sometimes I will wash mine twice as I know that I do not feel they are clean! (And I am a clean person and the clothes are not real dirty!) I am so unhappy with the decision of purchasing this horrible excuse for a washer that I could shoot myself. I will discourage every person I know from buying one. I will tell them to have their old washer repaired as many times as possible so they will have clean clothes! It isnt just Whirlpool, but all the manufacturers who have chosen to make this horrible decision for us, housewives, and anyone else who does the laundry where they live. I used to enjoy doing my laundry, but now it is a nightmare. I will tell my friends who are the same age as I am that if they can still find a machine with an agitator to buy 1 or two of them so they wont have to deal with this type of problem for the rest of their lives. I realize that now I have to eat this washer since I have purchased it, but I can tell you one thing; if I could sell it for near the price I paid for it, I would do it in a heartbeat! Realizing whoever reads this; it wont matter one bit and probably will never reach the hands of the ones who couldn’t care less or do something about it, but at least I have made an attempt to help others in the future.

We purchased a Whirlpool Gold Induction range, model#WF1910H0AS0, from Lowes Home Center for ~$1700.00, about 1.5 yrs ago. One night my wife was cooking dinner on the stovetop and she heard 2 loud pops and the whole cooktop went dead. We had Bobals appliances repair look at the range and they gave us an estimate of $800.00!! to replace the module board. The repairman said the module board had shorted out and burned. Thankfully my wife wasnt electrocuted. I contacted Whirlpool customer service, they said, There isnt anything they can do. The warranty is only 1 year. I also contacted Lowes customer service. They told me the same thing as Whirlpool, nothing they can do, 1 year warranty, etc. I have the part# of the module in the stove, W10390743, serial#31811552. After an internet search, this part # had been superseded, which tells me Whirlpool knows they have a problem. These ranges need to be recalled. I plan to contact the US consumer product safety commission to initiate a recall. Please inform consumers if they have this Whirlpool induction range with this problem, to also notify the Consumer product safety commission.

I purchased refrigerator in 2010 through Sears. The freezer door began collapsing (like the air was being sucked out) and Whirlpool sent a replacement. I should have known at that point - they had over 20 in stock instead of making it to order with a several week wait as the rep expected. I complained again (out of warranty for the refrigerator, but less than a year for the replacement door) and was given the too bad, so sad - next question routine. Now the freezer wont hold frozen food. If I turn up the dial, I end up with frozen lettuce, etc. So much for Whirlpool! Im not so much angry at this point as I am talky - at the grocery store to perfect strangers, at church, etc. Im disappointed that Consumers didnt respond - they still rate Whirlpool fairly high - makes me doubt Consumers, too.

My mom is 82. She purchased a Whirlpool refrigerator March 2013. Since her purchase, she has had to have numerous service calls. This was covered by her first yr. warranty. After the first yr., she purchased an extended warranty from Whirlpool. June 24th, 2014, her ice maker and freezer quit. My husband made numerous calls trying to get this fixed. He was switched back and forth from Whirlpool and Assurant. Assurant said it should be under Whirlpool and Whirlpool said Assurant. My mom felt that Whirlpool should have taken care of this problem. The refrigerator was a lemon. It was a French door style with bottom drawer freezer. We finally called the local dealer, whom she purchased it from, and he took it back. Gave her substantial credit toward another refrigerator, not Whirlpool! Very disappointed in Whirlpool... Will never purchase another appliance with this name!!!

We bought a new Whirlpool washer/dryer 6 months ago. Dryer is ok, seems to take a long time to dry. Washer is horrible. It constantly goes off balance and shakes all over the floor. Once opened, the clothing may be a little off, but not enough to cause such commotion. SO FRUSTRATING! If we could afford to replace these, they would be out on the curb today!

Whirlpool Cambridge Model #WTW7300DW0 - Someone needs to help us consumers with this wash machine purchase being refund our money back from Whirlpool. It literally eats my clothes. I have 23 shirts that have pin holes in them and 1 shirt with large holes in it. I also have a ruined comforter and blanket. The comforter has soap stains everywhere which dont come out so its not cleaning the clothes, the blanket (which Ive had for over 30 years) was frayed one side, seam torn off - the piece never came out of the wash machine. I have pictures attached of the damaged. Its suppose to be Water Efficient - thats a joke! I do 1 set of king sheets. It runs for an hour and 20 minutes and fills water to the rim of the washer and does this twice. Id like them to pay for my water bills! Oh they came to service it only to tell me I was putting the clothes in wrong. The service company said I had to put the clothes against the sides and leave the middle open. They told me there was nothing wrong but consumer error. Well I did clothes today and aligned them like the service company said - 4 more shirts were ruined. Called Whirlpool today. They said they were sending someone else out to fix the problem and said, Unfortunately, we dont pay for damaged goods. Well from all the reviews I read Whirlpool needs to suck it up and recall this piece of crap they call a wash machine. Did I mention its only 1 year old, yea this is horrible!

I do not use my oven much, mostly to heat up something. I noticed all of sudden I couldnt get the microwave to work at the same time as the oven. Then the controls stopped beeping. Then I went to heat up the oven and it started smoking and had a terrible smell. I am two weeks out and still no microwave or oven. The repairman was very nice. Came out and ordered parts. I wanted a new oven and I was told no. Parts came in. Repairman came out and nothing worked. Waiting, waiting and waiting. I will never ever purchase a Whirlpool appliance again. This is not my first bad experience with them. I thought maybe they got better but that did not happen.

Purchased my Whirlpool Duet front load washer WFW9150WW00 new in 2010. Also purchased extended warranty. After four years, just before my extended warranty was up, the entire inside needed replacing (drums, bearings). Now at only five years old, it keeps making a beeping noise in middle of wash cycle and wont continue working. Serviceman was told by a Whirlpool tech. that it could be two things, one being the door jamb, the other being the control panel. Door jamb was fine. Ordered new control panel ($240), had it installed and yet the washing machine still keeps beeping and doing the same thing. The serviceman doesnt know what else it could be. So, I am forced to return the part and purchase a new washing machine. I would never recommend Whirlpool to anyone!

First of all, Whirlpool is fully aware of the problems with water heaters and intentionally places requirements on the consumer until they give up. This info from a distributor. I bought 30 gal. gas water heater 7 months ago. Six days ago the pilot light went out. Went to Lowes (purchased there) and bought a replacement. Wrong one. Returned to store and was told they dont stock repair parts, call factory. Monday called warranty number. They offers to send thermopile, it would arrive in 5 days. I paid $30 for overnight. Plumber installed new part. Still doesnt work. Whirlpool says have the plumber call them theyll walk him through troubleshooting. I ask, Whos paying the plumber? They reply, You are. Plumber calls Whirlpool. They tell him to clean the screen. He does. They tell him to disassemble the burner. I stop plumber. I ask Whirlpool, What if its not the burner? They reply, Then well troubleshoot something else. Meanwhile Im 5 days without hot water. I go to Lowes where heater was purchased. The manager thought it funny Im another victim. I ask, Why doesnt Lowes stock heater parts? He says because Whirlpool doesnt let them carry parts. Im beat. I surrender. Parts from Whirlpool would take another 5 days and theres no assurance itll work. Lowes refuses to assist.I go to Sutherlands and buy a $450 Rheem on recommendation from plumber. Manager from Sutherlands hears my sad story and writes on receipt: Any warranty failure and Sutherlands will replace water heater free. He signs his name on receipt. I pay plumber to swap out heaters. Anybody want a 7 month old Whirlpool water heater. Like new. Cheap! By the way... I originally went to a major appliance parts store asking for a thermocouple for a Whirlpool. The three guys at the counter started laughing Hey we got another one looking for Whirlpool parts. They didnt have them either. Lesson learned.

I have a Whirlpool suite. Stove is fine...refrigerator is awful. Froze all the food in fridge. Cost me 100’s to replace. Put in new thermostat. Now sounds like a freight train. Bought in April and the filter already needs to be replaced to the tune of $81.

Whirlpool/Ikea Renlig dishwasher - Since installing this integrated dishwasher it has continuously destroyed the decorative panel door. On my model (they have recently changed in 2014) the steam exits at the top, this damages whatever it comes into contact with it. Today they are saying that it has not been installed correctly and that it should actually sit out from the countertop, i.e. jut out from the rest of the kitchen so that the steam can vent into the room. The panel should also be lower than the other doors of the kitchen cabinetry too. Hardly integrated and would be a bloody eyesore. I am about to call them back again and inform them that I will be making a scene about this in my local Ikea and with anyone else who cares to listen.

It has plenty of room. The compartments within the refrigerator are well organized. There is plenty of room in the freezer. Have had this for about eight years and going strong.

I dont think I ever bought another product where one of its highlighted feature does absolutely nothing. Using the Aqua Lift cleaning process is a waste of time and electricity. We were told this range had a self-cleaning oven when we bought it. If a self-cleaning oven is important to you buy something else.

I purchased a Whirlpool Gold refrigerator in May 2012 and about 8 months ago, ice started to form in the freezer. The ice melts and water drains out, so when you come in the kitchen all of the sudden you step in a puddle of water. I called CS and they told me the best they could do was authorize part(s) and the labor and service call would be my responsibility. Everyone knows service cost way more than parts.

WHIRLPOOL MICROWAVE HAS HAD MAGNETRON GO BAD 3 TIMES IN 1-1/2 YRS! I bought a Whirlpool Microwave Hood Combo Oct 2009. July 2010 the magnetron went in it! December 2010 the magnetron went in it AGAIN! This time we had to pay the labor to have it repaired because it was 2 months outside the warranty period. We did not want to pay because we knew having the same part go twice in one year that something is wrong with it. Whirlpool told us that if it happened a 3rd time that they would most likely replace the appliance for us. Well....July 2011 the magnetron went AGAIN for the 3rd time! Whirlpool told us to take it to a licensed shop to have it diagnosed to prove that it was the same part as the previous two times, fax paperwork from the prior two times, and have the shop call in the diagnosis of the 3rd time. We did all that, and they told us they wouldnt do ANYTHING for us because it was outside of the warranty period! Well they knew that when they told us we had an opportunity to get it replaced! THE SAME PART WENT BAD 3 TIMES IN A 1-1/2 YR PERIOD OF TIME. We trusted that the Whirlpool representatives were being honest with us during those phone conversations. Whirlpool can not explain why representatives would give us hope of a replacement (although each conversation is documented by their login and employee ID number). So not only did I buy a brand new MSRP $619 microwave, I paid to have it repaired the 2nd time, and to have it diagnosed the 3rd time, uninstalled and reinstalled the microwave each time, the inconvenience of not having use of the appliance during each occurance, and the unbearable suffering of calling in to customer service and repeating the story over and over to each representative. My house is brand new (we moved in to it November 2009); we bought ALL our appliances from Whirlpool. All I get for an answer now is sorry. That doesnt help me any financially having to repair and now replace an appliance that has been in use for only 1-1/2 yrs! I have seen $39 microwaves from WalMart last several years, so what is wrong with Whirlpools manufacturing?! Customer Service is unreliable, untrustworthy, non-sympathetic, and insanely frustrating! My question for Whirlpool is...why cant you make a product that lasts better (better quality=longer life=healthier environment and happier customers)? Why cant you stand behind your products better? Dont you care about the impact youre making on us emotionally, financially, and environmentally? The model # is GMH6185XVS0 Serial # is TRY3111264.

My wife and I went and bought a new Whirlpool 27 cubic foot French door fridge model WRF767SDEMO1 in 3-13-17 from Lowes and I have all the paperwork. And on Monday the May-28-2018 it stopped making ice, so I called a repairman and he came out May-31-2018 and he said it was leaking gas and it cannot be FIXED and it is JUNK. He told me to, Call Whirlpool and tell them you want a new one. I called Whirlpool and they are sending one of their repairmen out June -5- 2018 to check it and by that time I will lose everything in the fridge because it stopped working.

The Whirlpool dishwasher is the best I have ever had! The pot scrubber just cleans anything off the dishes! I hate to wash dishes before I put them in the damn dishwasher!

This Whirlpool Washer Mod # 4800XQ2 eats holes in all of my clothes, came from Lowes. I still have the sorry machine.

Purchased 7/2015. LOVED it @ 1st being the key word. Notice grayish residue on clothing. Mainly on black. Towels discolored and lint on clothing. My kids were blaming dye in the detergent, & using Purex Crystals. I changed detergent to Armen hammer sensitive clear. Stopped using my beloved crystals. Wrong! Cleaned the rim @ the top of the agitator all the dirt & grime get ps trapped in the rims it helped some what. Additional problems occurred. From time to time started noticing unbalancing no matter the load size. Paint bubbling, peeling & rusting. The lid lock broken. Nightmare trying to get an appointment through Whirlpool. Referred to go to a dealer. Called Sears. Gave specific details whats wrong. Appointment 2 wks out. Service arrived, he had no idea why he was there. No info given. Then he said he doesnt have the part. He ordered it and said itll be sent to me approx 5 days. But wont be fix for another 3 wks. Same with 3 people from customer care. Informed this is not acceptable. Another problem now when unplugging it still stays on its hold electrical current. This can not be replaced until its deemed its broken & cant be fixed. They rather your home catch fire. They dont care about the inconvenience for 2 1/2 months.

I purchased my Cabrio washer and dryer 2 1/2 years ago, and for the past 6 months, I have dealt with it being unbalanced and I tried everything to get it balanced. When I researched the problems, I found so many other consumers are having the same problems and that Whirlpool will do nothing about it. I decided to start a petition on Change website to try to force Whirlpool to stand behind their product and correct the problem, offer us a refund or another product, or even fix the darn thing. It is tough economic times, and we spent money to have something that was energy-efficient as well as a product that is supposed to carry a good name. I am a single mother with three children, and I dont have a $1000.00 to throw away after 2 years. This is shameful that we, the consumers, have to deal with this. Please go to the Change website and sign my petition. The more signatures I get, the more leverage we have to deal with Whirlpool. Lets pull together and show Whirlpool we will not stand for them robbing us of a quality product. Thank you so very much.

The main control panel on my Whirlpool Cabrio Washing Machine broke twice in the second year of ownership. I bought this in 2006. The part was replaced in March 2007 and then again in October 2007. Now, it is broken again and Whirlpool says too bad, they will not replace it again and will cost us $275 to fix it. People have posted about this problem all over the internet. How can they not help their customers and recall this washer part?

Purchased the 2015 Whirlpool Cabrio. Today 5-2018, the panel went completely out. When I called the store (Lowes) they asked if I purchased the warranty. I responded no, she went on to say, “Well since you choose not to purchase the warranty youre stuck”. Even if I paid for the warranty a washer should not break down in less than 3 years. My previous washer lasted 18 years with no problems. We purchased this washer because of the larger load. It was one of the most expensive washers. It’s a piece of junk and the manufacturer will not stand by their horrible product. Please DO NOT buy! I will be filing a formal complaint.

Love my new Whirlpool Refrigerator! Works well and no problems for the last year. Filters are pricey but found some at Lowe’s cheaper. Whirlpool stays in touch frequently emailing information about their products, some useful some not applicable. Would I buy this refrigerator again? Yes, I love the ice maker, it is quite large (enough to fill a small cooler), and the convenience of crushed or cubed ice is nice. Most people complain about the motors are loud yet we have not experienced that.

I bought a Whirlpool gas range in March of 2015. Three months later the control module went out on it. It was still covered under warranty through Whirlpool, so they send a technician out to fix it. Its now a little over a year later and the control module is out again. I call Whirlpool and ask them if it was still under warranty and if they can it fix it so they say, you want me to send a technician out. Why? I just assumed since theyre sending a technician out but there were going to cover it. Well the technician gets here and its not covered under warranty. And I now I have to pay a $90 service charge fee for the guy to tell me that the control modules out on it which I already knew. Hes going to charge me more than the stove was worth to fix it so I declined to get it fixed.

This unit is without a doubt the best microwave I’ve owned. It is reliable, cooks to desired doneness. It defrosts and rewarms perfectly. For the price I do not believe that there is a better performer. Would highly recommend with no reservations.

I will never buy a Whirlpool product of any kind. I bought a gas stove and its a piece of **. Won’t even light. Only way to start it is start boil then switch over to bake then it wont light. So please I ask that you make a product thats worth buying.

We purchased a new home April 2013. All our appliances were new Whirlpool stainless. Looked nice. After almost a year our microwave started acting improperly. Beeping, changing screens, not working when buttons pushed. Then the micro wave had a melt down and caused the glass try to break, parts to melt and caught fire internally melting plastic. Notified Whirlpool and they sent out individuals to repair. After several weeks the repair was completed and we were advised that they did not understand why this would or could happen. We should be fine now. Well we are now again having this unit beeping, changing screens, not working when tried, and when entering numbers, number and time are not what was trying to be entered. This unit my wife says is possessed and she wont use it. She fears it will burn the house down. It is Velos model TR 2 24 11000 serial number. It now beeps and changes with door open as I read the serial number.

Purchased top loading Whirlpool Washer WTW5000DW0 10/12/2015 at Best Buys, first no agitator machine for us. Two weeks later I call for repair service because of the noise from tub. Explained in other reviews as earthquake or jet engines. The machine is in the garage and can be heard through the walls into the house. Repair tells this is normal for the machine and it must be our first none agitator machine.I then purchased a extended warranty policy through Whirlpool. 12/13/2016 machine no longer washing clothes. Call Whirlpool for service. Repair came out 01/17/2017 (a month later). Washer plate had to be replaced. The gear was completely shredded. Not in stock, waited 2 weeks to get repaired. Tension springs on outer tub replaced at same time. Was told the excessive grinding and bumping of the tub was not the reason for the gear shredding.06/30/2017 same problem, I set a repair date 07/01/2017 between 8:00 a.m. and 12:00 p.m. No one shows and no call. I call Whirlpool and they are sorry and set the appointment the same day for before 5:00 p.m. No one shows our calls. I call back. Already closed. I call the next day. Sets a new date 07/05/2017, 8:00 a.m. to 12:00 p.m. Same problem. I called back speak to a supervisor who says hell get to problem and find out whats wrong. Sets a new date 07/08/2017 8:00 to 12:00 p.m. 07/07/2017 I get a call after 5:00 p.m. that the repairman is not available and can we reset for 07/13/2017. I hung up and called back the next day and spoke to a supervisor I had previously spoke with. He called an outside repair company that Whirlpool uses in this area. New date 07/12/2017. Repairman shows and I explain the washer plate was loose again and I smelled metal burning. I had told my wife to continue to use the machine to wash the clothes. The repairman tells me I voided the warranty by doing this. Im standing in the garage while he has his head in the machine trying to get the washer plate out. He shuts the lid and turns the machine on wash/spin says the machine is ok. We have an exchange of words and tell him I want to see the washer plate gears. He says he cant get the plate out now and I wasnt there for him to show it to me. This continued until he forced the plate off. He called Tech Support to say I voided the warranty. He told them customer claims loud noises and banging. I asked to speak to Tech but he tells me they dont speak with the customer. I looked at the gears on the washer plate and the transmission. Both had metal shavings. He tells me he is going to do me a favor and replace both. Its supposed to take a week. Wait and see. I have asked for a replacement or money for the machine through Whirlpool. I was told there has to be at least 4 repair requests for the same problem and the repairman has to determine that there is a problem or that its a lemon. I will not recommend or purchase another Whirlpool product.

Have had no problems and we have both washer and dryer Duet and love them. We need to make sure we keep the washer door slightly open to avoid mold. The dryer lint filter is a little difficult to vacuum out.

I bought washing machine Whirlpool Cabrio Model WTW7300XWO two years ago. It only lasted 2 years and the tub seal and tub bearing went bad. I called Whirlpool and they wouldnt replace defective part on their dime. I talked to supervisor and they still refused to admit they needed to fix this broken product on their dime and make it last longer than 2 years. They claimed only a 1-year warranty. This is totally unacceptable to have a supposedly good washer that you pay $700 for (manufacturer price $899) last only 2 years! Very, very disappointed! I wouldnt buy from this company again!

Refrigerator door display cable failed. The company declared refrigerator is beyond repair. Cable must be replaceable, we cannot throw refrigerator for small fault. The cost of cable is hardly Rs. 200 and refrigerator cost is Rs 25000. It is a design fault. Company has to replace cable.

Got the dreaded 4 flashes LED status - High Temperature Shutdown. Online and vendor documentation says that this condition requires gas valve unit replacement, a $115 option. If your Pilot remains burning, but main burner does not kick in, then a good guess is the circuit board requires a reset. Prior to any further work, test the Thermopile, that is the round item with two blades located below and to the right of the gas valve unit. Move knob on control panel to OFF1) Pull out plug with red and white wires located on front of gas control. 2) Have someone Hold in the control knob on the unit at Pilot, and make sure Pilot flame is burning. 3) Using a multi-meter, set it to millivolt reading, and test voltage across the two wires. Voltage should be greater than 350mV, preferably >500mV. 4) If you get a reading in that range, your Thermopile is good. Turn knob to off position. Do NOT uncouple gas lines. 5) Piezo Igniter wire comes apart, disconnect it. 6) Remove screw that holds front cover. (screw located bottom left as you look at the unit) 7)Cover simply pulls off directly towards you. 8)Remove the screw holding the circuit board to the cover, and remove circuit board by unclipping it - 3 clips, one either side and one at bottom. 9) Unplug the 3 strand thermostat cable, you should now have the circuit board clear. 10) Take a piece of aluminum foil, fold it twice, then lay circuit board on it facing up, do it on top of tank, want it grounded. 11)Using one of the multimeter probes, wrap a piece of foil around it, keeping point free, and ground it too. Then slowly work around the board, touching all the solder connections you see, as well as the chip legs. Pay particular attention to the round objects on the board (capacitors), make sure to ground out each of the solder points, visible either side. (takes about 5- 8 minutes, take your time) 12) Once done, reconnect thermostat cable to board, then reinstall board into cover (dont forget the screw)13) Place cover back into place, screw in cover screw, reattach Piezo wire and black electrical plug with thermopile wires. 14) set Knob to Pilot, get pilot lit (may take a few hits on the Piezo button) and while still holding the knob in, watch to see what LED flashes you get (there will be a 10 second time lapse before it will start to flash) 15) You should either get 1 flash or 7 flashes, that means the board is reset, now turn knob to warm, and see if main burner kicks in. Good luck, and for a half hours work you have saved yourself $$$. PS: If it occurs again, you have sediment build up, need to drain the tank.

55 Gal Electric New in 2003 / Limited Lifetime Warranty - I paid quite a bit more initially at Lowes for this unit. Its stainless lined. I have had numerous problems since purchase. I had to replace the sensing element in the Smart Box in 2006. Then the lights started flashing again making a humming sound in the box. I took each piece apart in smart box and cleaned them, which seemed to help. Then the upper element that is also stainless that requires a special wrench to replace went bad according to the blinking lights. Lights stopped after several resets. Now, the water is boiling out of the top of heater and they tell me its the seal in the element that I never replaced. The cover for the element is off. Water cannot possibly build up and force out the top of the cover of tank. I am not an idiot, yet they tell me that is most likely the problem. They didnt listen to me long enough to properly assess my concern. Every plumber I talk to says its the separation of the liner inside the heater. Nonetheless, I have a water problem now in the basement and have never heard back from Whirlpool as promised with troubleshooting guide on an email. I am sick of calling and getting the runaround with every issue. The warranty is horrible for the consumer. Sure, you have a limited lifetime warranty, but when you cant get proper information when you need it, what good is it? Made in America is why I bought the product. I also need a new washer but will not be searching in the Whirlpool line due to their lack of care with an important issue with my heater.

We got the convection oven. It has no element like the one we had before with the fan. It is useless. We have to upgrade the temperature to get what we want. Difficult to clean. It does not cook like it should. We do not like it, period. Those electronic controls are not doing their work. No more Whirlpool appliances. Problems with the noise of our dishwasher also.

I bought a Whirlpool Cabrio Top Load washing machine September of 2012. It has never cleaned the clothes well. For the last month the machine has a very loud spin cycle. I am very unhappy with this purchase and it is 2 months out of warranty. I emailed WHIRLPOOL and was told that all appliances have problems and wear out. WOW! It is 14 months old and has been used with care. I will never buy another Whirlpool product.

Whirlpool Cabrio washing machine WTW8800YC0 - My washing machine that I purchased a little over 3 years ago apparently is a piece of junk. Ive noticed a smell in the past few months, even while using Affresh. Now, its making so much noise that we must close the laundry room door while the washer is on. I called customer service and they will sell me a new 1-year warranty for about $345.00. Customer service thinks it sounds like the motor or the gear box! After reading the reviews on this washer, its not worth it to repair. More trouble looms for us. Whirlpool doesnt stand behind the product and as many complaints as there are, the washer shouldnt even be sold anymore! Never buy Whirlpool!

On August 16, 2016 I received delivery of an Whirlpool under counter refrigerator that I ordered online from Home Depot. Model # WUR50X24EM. Five months later, on January 10, 2017, it stopped working, I called Whirlpool for repair. They referred me to their service company, I called the service company the same day. They had a repairman out on the following Tuesday, 1/17/17. The repairman said that he will need to contact Whirlpool to order a part. Whirlpool sent him the wrong part. After numerous phone calls no one from Whirlpool could figure out the correct part number. The repairman kept sending over pictures and information on the correct part, but this all went nowhere with Whirlpool.On 2/7/17, I called and started yelling. I had been very patient up to this point. I was finally offered by Whirlpool a parts research to determine exactly which part was needed. Plus a $50 Visa card to appease me. At this point, its been four weeks without a refrigerator and no one from Whirlpool has put any effort towards trying to figure out the correct part. On 2/16/17, I called Whirlpool again to find out if they had found the correct part. They told me that the new part had been sent to the service company and Whirlpool scheduled me an appointment right then for Monday, 2/20/17.So today is 2/20/17, the repairman came and went, Whirlpool once again failed, they lied because the repairman came out with the wrong part that was originally sent to him when he ordered the part back on 1/17/17. I called Whirlpool and asked for a manager. They connected me with the Resolution Specialist. I told her everything and pointed out that it has been six weeks without a refrigerator. She said she will take care of it and get the right part ordered. I asked her how long I should have to wait, cause at this point I have waited long enough. She said she will have an answer by the end of this week. I dont believe her, I feel as though Whirlpool is pacifying me. I dont understand why they cant order the correct part.I have no faith in Whirlpool that they will do the right thing or have any understanding on how inconvenienced they have made me. I have no faith to the point that I ordered another refrigerator from a different manufacturer. It will be here tomorrow between 8am-12pm. Oh, and Home Depot, they washed their hands of this a long time ago. And, I have yet to see the $50 Visa Card.

I purchased a Whirlpool washing machine (model: AW01D8810 S silver color) and a Whirlpool refrigerator (model: WBM329 TI) together from United Arab Emirates for Dhs 1999/- & Dhs 1199 /- respectively on 28 Jan. 2011. I sent this machine to my hometown (India) in the same packing and I used the washing machine only for three months and found a complaint. I informed this to service center in Trivandrum, Kerala. Their team came to my home and told me that warranty cannot be given as I purchased machine overseas. They added that the PCB for the machine is having complaint and they dont have stock in India. Also, the machine is no longer available in the factory. The Whirlpool company completely stopped manufacturing the abovementioned model. Again, I came to UAE and contacted GEC group of companies for the PCB part. I got a quotation for PCB Dhs 425/- but the items is ex-stock with them. The machine cost only Dhs 1999/- and if I spend Dh425/- only for PCB, and the machine is with me for the parts since one and half years. I dont know what to do. If I spend another Dhs 600 + this PCB cost then Id rather go for another new branded washing machine. The model of machine is AWO1D8810S and serial no. is 12 nc 859247463000 003. Please advise what to do or if I can find the PCB in Kerala. What will be the cost? I am ready to pay the money for PCB but not for the above rates. Please advise, sir.

Recently, I was having a problem with my Whirlpool gas range so I contacted the 1-800 number. Long story short, the repair cost was so high I would be better off getting a new range. But believe me, it will not be a Whirlpool.

I currently rent, and so when our literally 30-yr. old GE dishwasher broke down, our landlords went out and installed us a new Whirlpool Dishwasher. I was excited because FINALLY I would have clean dishes and a dishwasher that didnt leak a bucket of water all over the floor. Well, weve had it for about 6-8 months now and I have to say that I am not impressed. It is not as great as I thought itd be. First of all, my dishes still look cloudy (despite using various brands - even homemade - detergent). Second, one out of every three washes gives me still-dirty dishes (food still on them, even though I rinse before loading the dishes). Now, Im not talking about tough stuck-on, need a jack-hammer to remove food. Just normal food. Mostly it is oil, like if I had a plate that I had eaten French fries on and there was grease left behind that normal rinsing didnt remove. A new dishwasher SHOULD be able to clean that! Third, it guzzles Jet Dry liquid (or whatever rinse aid you use) like an alcoholic in a bar. I have used a BIG bottle in one month. One month. With the old 30 yr. old dishwasher, it took me around 2 YEARS to use a big bottle. And lastly, it takes F-O-R-E-V-E-R to wash a load. My old dishwasher took an hour tops - to rinse, wash, rinse, and dry - and it was 30 years old. This new Whirlpool takes 3 HOURS!!! I can literally hand-wash all of my dishes (and with a family of 4 thats a lot of dirty dishes in one day), sit them out to air dry, and take a nap and it take LESS TIME than using the dishwasher. The dishwasher has all the bells and whistles to make it look good, but trust me, if I could have had the 30-year old dishwasher rebuilt to newness, I would have begged my landlord to do that instead. Dont waste your money on Whirlpool appliances. I left another less than friendly review for my Whirlpool Cabrio washer (only 5 years old), if you care to see it. Learned my lesson, dont buy Whirlpool. So disappointed because they used to be (USED TO BE) a reputable dependable brand.

What a horrible machine! From the day that it was installed not one time it gave me good cleaning. I spent so much money servicing it. Costed me over $700! I am done putting money into it! I am washing by hand! If you want a dishwasher where you can hand wash and God forbid your rinse with the machine (you will have to rewash everything) then this is the machine for you!

We bought Cabrio washer & dryer a year & half ago, and I hate, hate, hate the washing machine. Every load, it goes off balance. And you have to stop your other work, unlock & wait awhile on that, and rearrange your load of clothes. I called the repairman when I first had it, and he said, Oh yeah that happens, nothings wrong. OMG! How I wish I had returned it. If you dont rearrange the load when the cycle is done, your clothes are still soaked. So you have to re-drain & spin. Total waste of money & a lot of my time. Very very dissatisfied and will never buy another Whirlpool product.

I purchased a washer Type: 587-08, MOD: 1CWTW48004QO, Serial # C21920164 about two years ago. The appearance of the machine is in an excellent condition but its not working. The tub inside is slanted and makes a loud banging sound when rinsing. It is no longer in warranty. All my appliances are Whirlpool brand because my mom has items that are still 15years and over. This machine that I purchased did not even give me a quarter of that. The prices of these items are expensive and increasing all the time but the quality, durability and lifetime is diminishing at a faster rate. I am worried about all the other items I purchased: dryer, refrigerator, stove and microwave. I am most dissatisfied. I STRONGLY believe that this unfair and unlawful....I work hard and save up to buy these items to only get two years from it......Whirlpool please render some assistance!!!

I have had our new Whirlpool Cabrio Washer for about a year. I absolutely hate it. I along with all the other people that is complaining about their Cabrio. I have found it to stain my clothes, not get them clean... Sometimes not even get part of them wet. I wash every load now no matter how small on the deep water option. I still have to add about 3 to 6 gals of water after it fills to try to help them get as clean as I possible can. I have stopped using fabric softener because I believe that is what may be leaving the stains on the clothes because it doesnt dilute it. Also you cant soak clothes in the washer long enough. I know it offers a presoak but when the clothes are not getting wet... That is not soaking. I tried to fill it up and raise the lid so it wouldnt wash until I was ready for it to wash but it automatically emptied the tub after a short time.It is funny watching the clothes when washing... Even I could tell they were not going to be washed well. I thought who in the world developed this washer. Certainly no one that had ever really considered what women need to wash clothes on a daily basis. I would sell it but I dont think anyone would buy it. If there is a class action suit I would consider joining in. Whirlpool could not have spent much effort in checking this washer out. A lot of money down the drain. I did not buy the dryer because of the lint vent being on top of it. What a mess those make when you have to empty it. So I purchased a Maytag Bravos XL. Now that is a wonderful dryer! As one homemaker to another I suggest you check it out. Never had one I liked more.

I have a double door bottom freezer refrigerator manufactured by whirlpool. It is less than 2 years old and is an absolute piece of garbage! In less than a year the noise started, then the freezer became a refrigerator and my frozen stuff melted. I had a local technician come in and he fixed it but he indicated that the fix would not likely correct the problem. Sure enough, about 6 months later the same problem started all over again. Nowadays one is never sure where a product is manufactured. However, if Whirlpool had their products made by chimpanzees in the jungle they would be better than the pieces of trash they are now selling!

Got a fridge Friday night setup, and was not cooling as of Sunday still. Called Best Buy who we got it through and they sent someone out first thing Monday AM to look at it. Per the Whirlpool agreement, the first year has to get serviced through them. Finally got a hold of their service support to get someone scheduled to come on site. 11 days later was the earliest appointment, and they just expected me to deal with no refrigerator for 11 days. I asked of other options, what wait times would be after Whirlpool comes out in 11 days to deem it broken and they repeatedly said I cant give you any what if answers for anything. Were no help at all and just expected me to figure out things for at least 11 days on a brand new 3 day old machine that is broken. The absolute WORST customer experience ever and refuse to buy from them again. Thankfully, Best Buy has a return window so were completely returning it and going with a different brand.

My new refrigerator was purchased in December 2016. The black finish was scratched by the installers wiping off their hand prints. The retailer offered to replace the doors which happened two months later. The black finish scratched IMMEDIATELY while cleaning of the installers fingerprints, using a silk microfiber towel though it looks like the cleaning was done with steel wool pads. I called Whirlpool and the retailer. Whirlpool says to order more replacement doors. Ha! Ha! I have had black appliances since 2000 in another home and there was NEVER a problem cleaning them. I do not recommend WHIRLPOOL because of this problem with the stability of the black finish. I dont have a receipt or order number because the suite of appliances was purchased by the condo association, not me personally. But I can attest to the condition of the marred finish and the ludicrous solution provided by WHIRLPOOL customer service... order more doors. I guess youd have to do that every week after you clean the front of the refrigerator.

We purchased the Whirlpool Gold Gas Range (model #GW399LXUQ06) in November 2011. Last week, I noticed the porcelain enamel finish on the stove top grates has fallen off in pieces. I contacted Whirlpool today, February 14, 2012, about this issue and they advised me it is a cosmetic problem which is not covered under the warranty. They advised me that it would cost over $100 per grate to replace. We have had this stove for less than three months and I feel these grates are defective and Whirlpool should be responsible for replacing them. I am very dissatisfied with this stove.

Admiral dryer 14 months old and contacts in the timer broke. I contacted Whirlpool customer service and was told too bad, not under warranty. Warranty was for 12 months. Obviously, the timer is defective. How much of a difference do you think 2 months makes? Customer service even said that the parts are made by humans so mistakes will be made. Really? Wouldnt that be considered a defect? Whirlpool has a great web site with a quality circle of promise. What a joke. Guess they dont care about the big picture or their customers. Ill never buy another Whirlpool product. Thats my circle of promise. The repair tech told me that when they go for updated training, that Whirlpool is the worst for providing them with any technical help or specs for their appliances.

I recently just purchased a new home with an upgrade provided by the builder (which I paid), kitchen appliances to Whirlpool Gold package. 2 weeks from the time the house closed escrow, I used my Whirlpool Gold Accu Bake wall oven self-clean feature. I set it for 2 1/2 hours, which is not even a full cycle of 4 hours. I noticed after 2 hours that the oven shut down. The oven exhaust was hot and the panel control as well, (almost burned my hand). No power and door locked. After a week of waiting to cool down hoping it will unlock and turn back on, it didnt. I called the builder and Whirlpool. Of course, the builder said to call Whirlpool. They registered my oven and set an appointment. The contractor (A&E) came to take a look at my oven and assumed that it was just thermal fuse. He was explaining that the oven does heat up and shut down. Probably after this repair, this will happen again. He replaced the thermal fuse and tried to turn on the oven. The house electric breaker is working, but the oven still did not turn on. So this time, he checked the control board and said that it is dead and will have to order. I am tired of having an oven for 2 weeks only and already have this issue. I did find out as well online that Whirlpool do have several complaints regarding their self-cleaning oven. I want to either just replace the whole oven or give me cash so I can replace the Whirlpool and buy another brand. I dont see the point of having a self-cleaning oven if this will heat up and shut down the unit or get a suggestion not to use the self-cleaning feature anymore so it wont break. I think this is a design issue and Whirlpool is not taking the responsibility to fix the design to start.

This WP stove is so easy to use a child could do it. We use the built in timer all the time, not only when using the oven but timing items on the top of stove as well. Speaking of the oven, the self clean not only cleans but it leaves the oven sparkling. We love it.

Whirlpool cabrio top loader is junk from the first month. My washer has had way too many repairs. A&E repair has been a frequent at my home. Now Im getting ready to repair it again! Hub gasket or pump not sure this time. All has been replaced previously. Never ending - always something wrong with it!!!

Aqualift is a Joke. We recently remodeled our kitchen and purchased a new Whirlpool range model #WFE710HOAE. It came with a feature called Aqualift Technology to clean the oven. The button you push to start it says Aqualift Self-Cleaning. I followed the simple directions and when it was finished I was surprised to find that nothing was clean. I tried it again with the same results. I had to then clean some of it with the enclosed scrubbing pad. You cannot use any cleaners except one that they also send a small sample of. In short, it was like the old days cleaning my mothers oven with a scrub pad and a lot of elbow grease. I spent 30 minutes getting it somewhat clean. I am so disappointed and mad that Whirlpool can just blatantly mislead consumers this way. No one wants to buy an expensive product such as this and have to clean it by hand. You get as good a result if you do not even use Aqualift. My last range lasted 20 years and all you had to do was take a wet cloth and wipe out the residue. Whirlpool is at best incompetent and at worse criminal and purposely misleading with this and other similar models and should recall or be forced to recall and replace these with a working technology. I am surprised that the Federal Government has not stepped in. I would be very supportive and would participate in a class action lawsuit on this matter. As I stated in the beginning, this product is a joke.

I bought YMFE330W0AW0 Whirlpool on sale less than a year ago and I have been angry since almost the beginning. This is a cheaply made product which angers me because Whirlpool is supposed to be a quality product. The clock cannot be set because we have to press really hard and that part of the stove head is broken now. I knew this would happen after only a few weeks but was wishing it would not. There is a lot of heat that leaks out of the oven continuously when trying to bake something. The top is horrible. This stove top does not keep an equal heating element so if you put it on low, it actually turns off for a few minutes and becomes red again for a moment or so. It is impossible to cook anything evenly. I HATE and DETEST this stove. The worst product I have ever known. If it is on sale...BEWARE.

Ive always had a Whirlpool washing machine and it has been extremely dependable. I have not had any problems with my Whirlpool washer. A Whirlpool has came a long ways with their pricing. It was very affordable for somebody like me and I cant afford a lot but I could afford this. I was very pleased with my purchase and with the product. They havent let me down so far.

Whirlpool Refrigerator WRF736sdam13. Purchased from Lowe’s June 2015... freezing started in April 2019. Freezer bottom is not draining correctly and the bottom keeps freezing making it difficult to push door close. I have the extended warranty. This will be the 5th time on Monday, July 29 repair person will come out.I talked to Whirlpool and Lowe’s. The product cannot be considered a lemon because the problem continues to be “fixable” as stated from answering service when I reported the problem again. Customer service has been amazing up to this point. Anyone else have an issue with this model with the bottom freezing solid? Any suggestions?

We bought a Whirlpool model WFW5620HW front-load washer at Lowes. The unit shook so violently during part of the spin cycle that the Whirlpool-authorized service company technician said not to use it while parts were ordered. It seems the balance ring was not functioning. Parts ordered were shocks and tub assembly. The technician suggested trying to get a whole new unit, as the repair is so intensive he had only done one or two in his career.Whirlpool customer service said they would not replace the unit, and an escalated request had the same response. I think this is terrible customer service - when there is such intensive failure in the unit, they should provide a brand new machine. The work has not yet been done - we are without use of a washer for an unknown period of time, since the order of a tub assembly is so uncommon that they do not have a time estimate. Needless to say, we will never buy Whirlpool again, and suggest you do the same.

Whirlpool Duet 3.9 cu ft High-Efficiency WFW9451XW00 - Hear my first experience with Whirlpool. I purchased a washer machine 30 April 2014. Guess what - machine stop working suddenly on July 30th, just about three months later. I had a lot of guest from overseas. While they visit me, I did not have my washer machine. How embarrassing. It was big mistake to buy Whirlpool. It is all made plastic inside and they uses cheap Chinese material. Anyway, technician came house to check what the problem was... all control system was burned. He ordered almost 10 parts from Whirlpool on 04 August. Whirlpool scheduled delivery for 20 of August. I called them for them to send the parts faster so my guests could wash their clothes. They send them little faster for August 16. After a day, technician was in the house again. I waited about 3 hours for him to fix my machine. He was really nice guy. He put install all new parts. Just in front of me, new parts broke after 5 minute. Whirlpool still did not contact me about their decision. Today is August 26th... I called them 5 time already - Nobody give me useful info. NO Whirlpool, guys - bad service.

Why are the Whirlpool appliances so badly made that they are not fit for normal use? Are they buying substandard parts? Do ConsumerAffairs advocate for more robust, long lasting products, particularly with current sustainability concerns for the world? Having to buy a new motherboard and burners, cups and knobs after a couple of years of normal, careful use, is unacceptable, surely? The motherboard, burners and fitting charge is almost half the cost of a new appliance (gas range). Is this acceptable?

I bought a Whirlpool front loading washing machine 5 years ago, which has given me constant trouble. The computer on the machine is not working. When it is fixed, the machines makes extremely loud grinding noises and frequently the spinner does not work properly, leaving you with heavy sodden wet clothes. Whirlpools guarantee is very limited and customer service is unhelpful except to apologize for your horrible experience. You will have to pay for a technician to diagnose the problem. I will have to replace this costly machine after just 5 years of unreliable service. I would never buy a Whirlpool product again.

I know that appliances are made to be disposable, but throwing away a $40 toaster after 18 months is easier to live with than throwing away a $350-$400 dishwasher. We bought a new dishwasher at Lowes on October 15, 2015. It is now May 11, 2016. The manufacturers warranty was for a year. It has been about a year and half since it was installed. Not very long for an appliance that one would assume would last at least 5-10 years. When we called Whirlpool to see about a repair visit, we were told that the trip to the house would cost $105, and the parts could go as high as $250-$300. So if you weigh the original price to the repair price, having it repaired is not rational, but neither is throwing away a dishwasher thats almost new. Its still clean inside. No soap residue or anything in the tub. In the past, by the time we were in the market for a new dishwasher, our old dishwasher looked like it had been through the war. It just breaks my heart to know that a company is so slipshod at making appliances that they wear out in less than two years. There doesnt seem to be any recourse but to dump a perfectly good, relatively new dishwasher in the landfill. We are leaving a very big footprint by doing this.

I have had this refrigerator for 23 months. The ice maker has been a continual problem. It overfills and water runs onto my hardwood floor. After four service calls for the ice maker, the defroster heater caught on fire and melted the interior wall of the freezer. Not sure if we fixed the ice maker since we had the fire four days after the last service call. My service rep declared the refrigerator unrepairable. Fortunately I had purchased an extended warranty and they refunded 85% of the purchase price after 2 years of use. Besides the ice maker problem and the fire, I also had trouble with food freezing in the refrigerator compartment. I dont recommend this model, but my repairman says that Whirlpool is as good as it gets.

Bought new from menards. Doesnt work properly, doesnt wash right and cleans poorly. It too bad because I thought I was upgrading from my old Whirlpool washer that was 15 years old so I order the new cogs for the agitator on the old machine and now using it again. Works better than the new one. Sad that whirlpool wont stand behind the product. Might as well be made in china.

Im very frustrated. I bought a Whirlpool Refrigerator for nearly $1300 in Sept. 11. It is a side-by-side Model #ED5KVEXVL00. The refrigerator side started warming up to the point that we noticed. We put a thermometer inside to confirm; it went up to nearly 60 degrees. We tried cleaning any dust underneath from the coils and even unplugged it for a while. The compressor appears to be the potential problem. Sears is not sending a repair guy for 2 WEEKS (It is a hot July here in NY)!!!!We are saddened that Whirlpool says it is out of the one-year warranty - so now we are facing the choice of a large repair bill or buying a new refrigerator. What a waste of money... Its not even 2 years and it needs service or a dumpster. Shame on Whirlpool for not standing up for customers when clearly there is something wrong with this machine so close to the warranty and so new. Sears and Whirlpool - youve lost me as a future appliance customer!!! :(

We purchased a Whirlpool Dishwasher from the Home Depot, it was installed 3-28-2015, less than 30 days ago. On 4-21-2015 the dishwasher stopped working. I called Home Depot expecting a replacement; but we were told you have 48 hours; you need to contact Whirlpool, due to the CRAP warranty. I called Whirlpool, we were told that a TECH would need to come out and address. They came today, ** , told us that the Motor is bad. (NOTE I havent made a payment on this dishwasher). So we called Whirlpool, expecting they would replace. I spoke to ** who advised me they would not replace, only repair. I explained this is unacceptable for a new product. I demanded to speak to her Manager; Spoke to ** who said the same. I asked to speak to her manager, his name is ** , but HE DOES NOT DEAL WITH THE CONSUMERS, this is beneath his job class I was told. So NOW I have no choice but to have this Dishwasher repaired; it will take over 2 weeks to get the part. I just dont understand how this is good Customer service. It is the worst I have ever experienced.

My 1 year old Whirlpool top loader is an absolute nightmare. It does not complete cycles. Stops all the time with various error codes. My washing comes out soaking wet. The pipes on the inside comes loose and floods the house. The machine stops all the time with all the washing clogged on one side of the drum. It is a 16 kg capacity machine but you cannot even think of putting 8 kg laundry in there. I will never, ever buy any Whirlpool product again. Cheap scrap! Thats what it is.

We bought this dishwasher because it was rated on the quieter side... It was purchased in 1999 and is still operating like new. I am amazed it has never broken down. I have wanted to replace it but my wife says Why?

The icemakers Whirlpool has been using for the last couple of years are a PITB. They have diamond shaped ice cubes which are great but, whenever the filter nears the end of its life, the icemaker fill tube freezes up. Occasional freezes up just because. Changing the filter, although the old one supposedly has some life left, may/may not solve the problem. Filling the ice tray with foreign ice for a few days thaws the fill tube and it will generally start up again - maybe. Complete waste of time and energy!

Replaced an old water heater with new Whirlpool 40 gal. short natural gas water heater N40561-403. Good instruction, very clear directions. Also purchased at Lowes was a Utilitech universal gas water heater installation kit. The nipples provided in the kit screwed very loosely into cold water inlet and hot water outlet. I used teflon tape and finished the installation. When I turned the water on both fittings leaked. I couldnt tighten the nipples any further so I shut the water off and drained the tank a bit and reinstalled the nipples with at least 8-9 wraps of teflon tape. Im not sure if that is normal or if nipples were under size or if the cold water inlet and hot water outlet were larger dia. than normal. FYI.

Whirlpool Energy Smart Residential Electric Water Heater - On top of this water heater is a junction box. If it goes out, so does the water heater. I am on my fourth junction box, at my expense on three of them plus the electricians bill times two. They finally sent me one free!