Whirlpool ADP100 wh. A few programs, washes well, dries ok, not great but ok. Standard free standing size, 60 x 85 x 59 cm. The washer itself is fine, but oh the cheap moulded plastic parts, utensil basket, water arms etc, so poorly made. Its amazing that a company would use such poor quality and design to save what can be a few cents on the overall product, personally I was disgusted at the cheap crappy plastic bits.

Bought an HE top loading washer 4/19/19. Oil leaking on floor from washer. Today, 2/12/20, while still under one year warranty, had transmission replaced. We have always purchased Whirlpool appliances. Not sure if we will in the future.

Bought this refrigerator in June 2018. Had issues with freezer section and service technician came July 19. Issue was resolved but only temporarily. Had another technician come in Oct 3 and was told he had to order a new freezer drawer which should take 3 days. Now being told the drawer won’t arrive until Nov 15. You call that service? It would have taken less time to get a new refrigerator. I would never recommend buying Whirlpool products to anyone. What’s the point in buying a product that you can’t get proper service on.

Thermocouple failure on a Whirlpool water heater - We are having trouble finding the part to replace it because the thermocouple is threaded left-handed, and Lowes does not seem to have any replacements in stock locally. Meanwhile my tenants are without hot water, and my repair bill is escalating due to labor.

We bought this pair, the washer and dryer, not even two months ago. I have not liked it since day 1. My clothes do NOT clean well at all. I had to wash the same load THREE times and still there is dirt on them! Just regular dirt. No oil, grease stains or anything... dirt. I even went and purchased POD detergent to make sure I was using the correct amount of detergent... Came home and washed the load again... DIRTY. Customer service says theyll send out a technician, but if they find nothing wrong, itll cost me... I wish I had read the reviews before I purchase this junk! DO NOT BUY!!!!!

Please read if youre thinking about buying from Whirlpool - the Whirlpool front loading washing machine. Hmm, where do I start? Oh yeah, its a colossal piece of garbage. Four years ago my wife and I went shopping for a washer and dryer. We looked at quite a few and then we came across the Whirlpool front loading washer. Ah, the wave of the future. The end all solution to your washing needs. The best the market has to offer and at over $1,100, they should be. The salesman completely sold us on why we should spend a little extra for such a superior product. I thought, I work hard. I dont make a ton of money, but this sounds like a long term, worthwhile investment. Wrap it up, the washer and dryer combo. Fast forward 4 years later. Whats that awful clunking sound the washer is making? Oh, its the drum. Maybe its off center. I opened it up to find that the spider arm is broken. Isnt it only 4 years old? Surely they (Whirlpool) will fix this at no charge to the consumer because as I was told 4 years ago, this is the best technology. Now mind you, its just my wife and me. She doesnt have to do laundry for 50 people or even 4 for that matter. Calling Whirlpool (ring, ring, ring. Hello, this is Whirlpool), I explained to them what the problem is and that we have only had this magnificent piece of gold for 4 years. What can you do for me? Sorry sir, the machine is only warrantied for a year. Youll have to buy the $350 part to fix it. Reading between the lines, Youre screwed sucker. Thanks for the cash. Really, youre telling me that I spent almost $2,000 of my very hard earned money for a washer and dryer set, and after only 4 years of use you will not fix it? Allow me to paraphrase the reply in laymans terms. Nope, youre ** and thanks for the green. Here are my thoughts on Whirlpool. They are one of the worst companies out there for customer service. The front loading washing machine is a horrible product that should be pulled off the market and never be sold again. My experience with this company will never happen again because I will never ever buy another one of their products. So please, before you think about giving them your business by buying a front loading washing machine, think again. And remember this - I now have a $1,100 paperweight.

WE had a Kenmore dishwasher and it never got the food off without scrubbing the dishes first. We decided to get a new dishwasher after being very frustrated. We purchased a Whirlpool and noticed a difference instantly. It was quiet, got the dishes completely clean, (no pre-washing like before) and was overall a better fit for our family.

I bought a new washer and dryer 2 years ago, it was built by Whirlpool under the Kenmore name plate. In the first two weeks we had them come and service it as it was very loud in spin mode. The serviceman said they were all like that. Now, two years later, it is so loud you cannot even carry on a conversation while in the spin mode. Called for service again. After two minutes he says, You better buy a new washer, this one will cost over $800 to fix. Never will buy another Whirlpool appliance or Kenmore again. Buyer beware!

The duet washer is just over one year old and started showing F25 code on screen. It had been making a really loud noise in the spin cycle. Last week, a really loud noise and then the loads wouldnt be spun. There was a puddle of water on the floor near the machine. We had a repairman out today and he stated that theyre repairing these machines all the time. He stated it was the bearing and that theyd been told that Whirlpool had installed bad bearing from a different supplier. I called the Whirlpool experience and after 4 minutes and 19 seconds, I actually spoke with a service rep. She said since my machine is less than one month over the one year warranty, Id have to call the extended warranty people. I asked for a supervisor and after 2 minutes and 38 seconds, she came in line and wouldnt budge from her story. They also stated that there are no service issues with this model washer. Extremely poor attitude and Whirlpool is doing everyone, whoever purchased a duet washer, a terrible job on these washers. At least, Ive now found out that there are a lot of other folks out there with the same problem. We need to get some attorneys to start a class action just like the mold/smell customers did already. Sad, sad day for Whirlpool as Id been a customer all my life.

I’ve had my Whirlpool Duet for 12 years and it has been a great one. I’m a mom of three sons, all of them wash their own laundry!! Lots of loads are done weekly and it cleans well! We leave the door opened after it’s unloaded so the tub will dry. Every few months, I put a tab in it so it will clean out all of the buildup. I don’t get the “front loader smell” that way.

After owning the highly recommended Cabrio for only 2 years, I was told it would cost $300 for the motherboard!! I have always used Whirlpool but this machine is terrible. Water saving is not an option when washing clothes. Unless I use the bulky cycle, my clothes come out dry and smell dirty.

I cant begin to tell you what a pile of crap my Whirlpool range with Aqua Lift cleaning is! We purchased it brand-new and it is the slowest oven on the planet! If I want to cook a pizza I have to call home 30 minutes in advance so the oven will be 1/2 heated up. The Aqua Lift has never worked and the company has the most abhorrent customer DIS-service Ive ever had the misfortune to deal with! I hope these scumbags go bankrupt!!! AVOID anything Whirlpool! There is a class-action suit in the U.S. over what a slime bag bunch of crooks they are and how their Aqua Lift technology has NEVER worked!!

Terrible wash machine. Some clothes come out having never even gotten wet. The spin cycle ties your clothes in knots so bad you have to machine dry them because the wrinkles are ridiculous. I’m all for saving water but if your clothes don’t get wet, how are they going to get clean? Also can’t do just a rinse and spin cycle. I would rate zero stars if I could. Don’t waste your money on this junk! Wish I could buy an old fashioned Maytag. Those washers were the best!

I purchased (from Lowes) a Whirlpool water heater in 2010 unaware of the recall and problems a lot of customers were experiencing. I have changed (6) thermocouples the most recent yesterday 2-10-2014. The heater still does not work. Is there any compensation I can receive at this date. If Lowes were aware of the problems with the heaters, how can they still in honest sell these water heaters to the public.

I have a refrigerator model WRT359SFYM00 that is 4 months old. It suddenly just stopped getting cold. Trying to contact Whirlpool warranty/service department has been a nightmare. Once I did get them they spent almost a week trying to locate someone in my area to service it. I was in constant contact with the phone support person, but they kept telling me its out of my hands a special unit was making calls to find a repair person. After almost a week they informed me they could not find anyone but if I could find someone to service it they would reimburse me (max $250 labor). I spent 5 minutes and 1 phone call and I found someone.They wasted a week bumbling around with wanton disregard for their customer. Their service after the sale is deplorable. They are staffed by people who answer calls but have no ability or authority to fix a problem. Worse yet, they kept telling me it was out of their hands. If not in their hands, then whose? I assure you I will never buy another Whirlpool appliance simply based on this warranty experience. What a horrible way to treat your customers. Shame on Whirlpool!

When we bought our side by side fridge (model GD5RVAXVB02), the manual said to clean the condenser coils if you have excess dust and/or pet hair. We have both. We tried with the vacuum and with a brush but it is impossible to get to the coils because they run side to side instead of front to back. You can only get to the first coil in front. The rest cant be accessed from the front, sides or back. I called to find out how Whirlpool recommended they be cleaned and they could only recommend a vacuum attachment tool (8171579A) to clean the floor below the coils or a coil brush (4210463RW) that cant reach the coils! This design is meant to fail prematurely. They could have easily installed the coils running front to back so they could all be easily cleaned.

Purchased Whirlpool Cabrio model WTW6400SW washer and dryer 1/7/2007. The matching dryer was dead on arrival and the second dryer motor died within a year. Washer: 1year 2 month the washer motor died. Whirlpool paid for the part and I paid the labor. The following year, the bearing went out and the outer tub was replaced (the bearing is inside the plastic outer tub - bad design. Whirlpool paid for the part and I paid the labor. Feb. 2011 had one of the F errors. Whirlpool repair tech came out as the tub would not drain and it was a wire that had come loose underneath washer - another service call charge. Dec. 20, 2011, I had an error F50. The Whirlpool repair tech came out, verified no clothes or money stuck in the machine. All clear. He called higher level whirlpool tech and they paid parts and labor to replace the main control board and the RPS Sensor. Im single and am not abusing this machine. Like everyone else who posted. I paid close to $1,000 for this washer (not including the dryer) and I have been a faithful Whirlpool customer for 3 generations, but if Whirlpool doesnt offer some kind of compensation/trade in credit to customers who purchased this (knowing that the design is bad/faulty) washer and discontinue this model. This will be my last Whirlpool. I will have lost all faith in Whirlpool. The Whirlpool service tech that I found is op notch. I will miss him if I have to switch brands. Im putting 1 star as I know this machine will not be operational for 9 years which is the minimum that I would expect. If it makes it to 6 years without another service call, it will be a miracle.

I bought a semi automatic washing machine from Croma Store (Gurgaon) on 03/09/12 Model no A-72H* and I regret to say that the water direction changing knob (to change water flow from agitator to dryer), has broken. The machine is not even 4 months old and the water inlet is broken. How can this happen in a brand new washing machine? You claim to have durable home appliances products and your machine does not last 6 months? Can you see that the broken piece is attended to or replaced at the earliest?

Whirlpool convection/microwave GMH6185XVS - In 2011, we purchased a whole new kitchen for our home with the top of the line Whirlpool products. The sorry side of this project was our microwave. This product has been terrible for us! It has been removed from our wall 4 times for failing... and four times we have gone for weeks at a time with a big hole in our kitchen wall!! All of the failures were due to the microwave not heating food or drink, and all, according to our local dealership, were for various different reasons. Again, it has failed and our local appliance center who we bought everything from does not want to deal with it anymore. I dont blame them... I dont either!! It looks beautiful up there above our range telling me the time of day... My wife and I are older adults and take very good care of everything we own. There certainly has never been any abuse to this product (not to mention we spend half our year at a winter home so this microwave only is used for 6 months a year). I contacted Whirlpool customer service about the reliability of this product and their response was that it is now not under warranty and we should deal with our local store about repairs. I have a small Sharp microwave sitting on the counter below this crappy excuse for one that stays there all the time in anticipation on the Whirlpool going down!!! The $60.00 Sharp never fails me!! This was our 2nd time around purchasing all Whirlpool products for our house. We did the same thing when we built back in 1990. All appliances performed as they should have back then. It seems Whirlpool integrity has gone downhill. I will never buy another Whirlpool product nor I will recommend to anyone I know to do the same. Good luck to anyone who purchased one of these.

Whirlpool Range Model XFE381LVS - 12/13/2014 4:30PM Wife was cooking dinner and turned oven on. Smoke started coming out of the back and called me. I ran to the breaker panel and turned off the breaker. Back to the stove, pulled it out and smoke still coming out in back at the top. I could see fire in the top of the back panel. Slowly the fire went out. Unplugged the stove, I removed the back panel, wires were still smoldering and the Control panel was burned thru. Took pictures so I could contact Whirlpool Monday. The Electrical control panel is destroyed as well as many wires. Glad we were home and oven was not left on while we were out in the yard or Home could have been destroyed. Purchased the stove from Lowes 11/02/2010 with a extended warranty. Tried to add receipt but would not accept, wrong type doc.

In less than 4 years the top lid broke at a poorly designed hinge point (+$200). Cabrio washer mercilessly tangles/twists clothes; HE does not totally rinse all detergent from clothing necessitating extra rinse (so much for efficiency); now at 4 year point bearing has gone and machine sounds like a freight train (+$250). Do not recommend this item if this what to look forward to. Called Whirlpool initially about tangling/twisting problem and just got lip service about arranging clothes. Duh, did that already.

I am experiencing problems with keeping my pilot lit too. I checked the screen and this is not the issue. I have just returned from Lowes where I purchased the water heater and they informed me Whirlpool supplied kits for this issue and it was widespread. They mentioned a class action and went on to tell me they and all surrounding Lowes stores are out of the free kit and arent expecting anymore. Am I to feel lucky my water heater water didnt fail sooner only to feel unlucky all of the free repair kits are now gone? Lowes provided me with the Whirlpool phone number for help and they have just informed me it will cost me $35.44 plus shipping. I now see how widespread this problem is. This isnt right. I am very disappointed in the handling of this known problem! What is my next course of action?

We purchased a Whirlpool Cabrio Washer (Mod #WTW7300XW1) and Dryer in 2011. Ever since we have had the washer it has eaten clothing, towels, sheets etc. It now has a main bearing that is so noisy that we have to close the door to the laundry room to be able to hear in the rest of the house. Also the sealed tank around the drum is now leaking. We invested close to $1000.00 in this washer and in my opinion it is a piece of junk. The washer repairman told me that he has had 3 (three) other Cabrios with the same problem in the last month, but Whirlpool says that there is nothing they can do as they have had no issues with this problem. Last Whirlpool product that I will buy.

The agitation is too loud. I called Whirlpool customer service and said I wanted to return the washing machine because it was so noisy. Whirlpool customer service agreed that it was noisy and said they would send a technician out. Whirlpool customer service never told me the technician they were sending would cost me 25% of the washing machine cost. The technician said this is normal all machines are this loud. Now I am out the cost of the washing machine plus the cost of the technician and all I have is a very noisy washing machine. Im a real satisfied customer. The machine was bought 12 days ago.

The one star is just for the oven, which is still working. I have a microwave and oven combo and the microwave is used occasionally for popcorn or to reheat the food. Soon, it stopped warming up. I called the service, which is one of the worse experiences I ever had, and was fixed.Soon after, the same part got broken. But I ran out of the warranty. I bought the extended warranty and all the problems started. I was told by one of the Whirlpool representatives that before my warranty will become effective, I have to fix my microwave on my own expense. But in the Whirlpool terms and conditions, it stated clearly that they do not cover if the repairs are made by anyone other than a participating service provider or those recommended.I decided to cancel the warranty after paying the first rate but before it become effective. I fixed the microwave on my own expense with a different repair service, since the one that was recommended by Whirlpool charged almost a half of the amount as I paid for the whole unit.Within the month, the some part got broken again. I called Whirlpool to find out if this is a manufacture problem and is listed as recall. However, Whirlpool did not respond.

We have had this microwave 3 years. The first thing we noticed was that baked potatoes were way overdone and nothing heated up correctly when using the sensor Not a big deal - just stopped using the sensor button. Now, we keep getting the open/close door message keeps coming up. I have done all the recommended fixes with no luck. Now we need to have a repairman come out to fix it. It seems when you are paying over $300.00 for a microwave, it should last longer. If I had known it would be such a poor quality, I would have bought a less expensive one and definitely a different brand. We do not use a microwave on a daily basis, so it certainly did not crap out from overuse. I would not recommend this to anyone. Save your money or you will be spending much more on repairs.

Whirlpool Calibri washing machine - I have the washer for 4 years and have replaced four computer boards to the tune of nearly $300 each. When Whirlpool was told of my experience, they said they were sorry. Obviously, I am too and will not buy again. You would think they would give me one board at no cost, but I guess words are cheap.

We bought a Whirlpool refrigerator/freezer from Lowes 4 years and 11 months ago. It apparently sprang a freon leak somewhere... repair person cannot tell until they take it into their workshop which will cost $300 - 400 just to find! And then there is a strong possibility that the compressor is toast. I called the company and they were not willing to help out at all. Why should a refrigerator only last 5 years (technically less)? I am not buying another Whirlpool and am looking for refrigerators that have a longer warranty on their compressors - LG which has 10 years! Whirlpool cant do that????

I bought in 2008 a Whirlpool Cabrio washer because it was the best. It cost me $900 plus 170 extended warranty for four years.This month, my washer showed an f1 code. I call the Maytag store and guess what, they are not there anymore. They closed the store. I called for my extended warranty and guess what, they are not with Maytag and they filed a chapter 7. So, I spent over $1000 in a machine that only worked three years and now I have to buy another just because no one wants to take the responsibility on the warranty. I have to pay another $300 to fix the problem and even doing that, theres no guarantee that it wont fail again. So, and this is to the people of Maytag and their cheats, you may take my money but you lose me as a customer forever. Thank you for nothing. I will keep that in mind next week when Ill be in the store buying another washer.

I have purchased a Whirlpool Washing Machine Mode W/P WM ROY 6212SD(31089) Sl.No.INF 153400517) GRAY/CHR TN 6.5 on 05.12.2015 with two years warranty on complete washing machine. The warranty period over on 04.12.2017. Exactly after over 3 months the machine start giving noise and we had been in touch Whirlpool and registered the complaint during last week of March 2018 and their local service center people visited, charged Rs.500/- service charge and informed that the machine to be taken to their service center to ascertain the complaint. After over a week informed that the machine complaints of Tub Support, Seal, Bearing, Drive etc. and the estimate is Rs.5,900/- including transportation (hardly 6 kms). The machine cost was only Rs.16,900/- then. I am surprised to know that just after 3 months of expiration of warranty the machine went wrong and the cost or repair costs me Rs.5,900/- is very huge. I hope the concerned will examine this.

Horrible. We purchased the set In October 2010. It worked great for a little over a year. (Go figure, just out of the manufacturers warranty.) The washer stopped spinning out water. Every other cycle completes successfully. The diagnostic cycle is also successful but once there is clothes in the machine, it wont spin. I called customer service and was told that a one year warranty was $230 and service is $130 plus parts. After reading another horror story, it seems that this venture is going to cost us around $450 for a new circuit board. Where is that class action suit at again?

We purchased our Whirlpool Refrigerator #WRT519SZDB from the Home Depot 2 years and 10 Months ago. About three weeks ago it started to freeze items in the frig section. We lowered the frig section cooling level one selection and went on a two week vacation. When we came back, everything in the freezer section was thawed out. We had a tech look at it and he told us that the compressor was partly seized and overheating. Tried to reach someone at Whirlpool customer service by phone, email, and chat but so far, I have not had anyone contact Me back? Looks like repair will cost almost as much as a replacement refrigerator. So much for Whirlpool being a trusted brand!

If you are considering a Cabrio washing machine, save yourself the aggravation and buy something else. I purchased a Cabrio model WTW5640X from Lowes 2 years ago. It has been one disappointment after another. First, the clothes were coming out really wrinkled and not fully rinsed. I now routinely use the extra rinse cycle. I also started washing very small loads with hardly any soap (and yes, I use the HE detergent). That works for me, but its not practical for a household of more than 2.This machine is also not for anyone with kids or who expects to remove routine soils. It doesnt clean well. White socks start looking dingy after a few washes, and even the hot cycle with bleach doesnt get whites white. Now, the washer has started shutting off with the clothes still soaking wet. I can press the Drain & Spin cycle to get it finish the job, but that adds another 13 minutes to the 63 minutes it already takes for a regular cycle with the extra rinse. I so wish I had not replaced my 15 year old Kenmore.

My wife and I purchased a Cabrio washing machine and dryer, this is by far the worst washing machine we’ve ever owned. It hardly fills, even in deep water cycle. If you watch the clothes through the smoked glass lid with a flashlight, you can see they don’t even go underwater. The dryer seems to be fine but I would never recommend the washing machine to anybody looking to buy one.

I have had the machine pair (Whirlpool Cabrio Platinum) for almost 4 years and up until a few months ago I LOVED the washer. I was advised when I bought the machine to make sure to read the manual, which was very helpful in learning to use it properly. I have never had residue on my dark clothing or ever had the clothes come out partially dry. I use liquid HE detergent nothing powder goes in the machine. I also read many reviews before buying it and a got some advice from them. I have washed king size comforters with no problems. Everything has always cleaned very well. The only issues I have are that when bleach was used in a previous cycle. Ive had a problem with the bleach not being fully dispensed and ending up in the next load. Fortunately it was just towels and not darks!!! Although, I had just bought the towels and now they look tie died which was very upsetting to me. I learned to add water to the bleach dispenser to dilute it and that issue seemed to dissipate. BUT NOW... I COULD THROW A TANTRUM. I PAID 1800+ FOR THE PAIR AND THE WASHER IS SHOT!!! A pretty common problem with the Cabrio from what Ive read. It started by making a very loud noise when spinning, like a helicopter was landing in my laundry room! I continued using it, I even thought the sound was getting better after I did the clean cycle. The last load I did would not complete the cycle because it kept reading that it was unbalanced and unfortunately it was a load of heavy wet towels. I was far from happy when I had to remove them and go to a Laundromat. Needless to say its the bearings and to fix its very costly. I cant even fathom that a less than 4 year old machine needs to be repaired and the cost is roughly half of what I paid for it!!! I do know I will NEVER buy another Whirlpool. What happened to making things to last??? Next machine I will definitely get extended warranty. I can honestly agree with all the other reviews... THIS MACHINE IS HORRIBLE!!!

I bought this nightmare machine one year ago, and stop working. If I try to program a cycle it put itself lock so I can not use or program any cycle. I can not open the door and start a noise like it was draining without clothes at all. And when finally it ends, the machine is like dead, no works, no programs no nothing. I am sick of this appliance. It is almost new and just does not work as it should be. But the worst is customer service, OMG. They lie about everything. The technician came to see what was the problem and told me it was the card, so he could not do anything until the factory send the piece to the place where I live. Well this happened one month ago and I am still waiting for the service. My guarantee was still on time, but every day at customer service they have a excuse/lie that the piece is on my way and service will be completed. Well I am still waiting and nothing happens. I am desperate. No one cares about the customer. If I would have known or read the bad reviews about these washing machines I would have never bought it. I got it at Walmart. I regret deeply. I do not know where or what else to do. Nobody cares or listen. Shame on you Whirlpool.

I bought a Whirlpool Duet Washer and Dryer in September 2013 and washer is already broken. It leaks out the front of the front loading door (yes, I clean it as advised, including leaving door open to air dry etc). I am a retired senior citizen and my wife and I spend 6 months of the year in Florida so the washer has barely been used since we are barely home and its not like we are trying to wash load after load of heavily soiled items daily. I would not recommend this product at all!! The repair people said it would cost approximately $300 to fix and offered a plan to fix it for $350 with a 1 year warranty. Why should I bother to do either if I will have to do same after 1 year? This machine is barely used and broke?! The customer service people were not helpful and seemed only interested selling me the repair plan to fix what should not need fixing. So, to recap - I bought the machine in 9/13 then went to Florida from 10/13 to 4/14 (so it was used 1 month). Then, it was used from 4/14 until 10/14 (6 months). I returned from Florida this year in April 2015 and it started leaking in June 2015 (2 months). So, my machine has been used for a grand total of 9 months and it is already broken!!! Stay far away. Whirlpool should come and replace this machine for us for free if they care anything about customer service and senior citizens but clearly they do not. In Florida we have an old Sears Kenmore machine that has lasted for over 20 years!!

Last December our refrigerator began to freeze food - gallons of milk, bowls of food, and produce. I called Whirlpool: Of course the warranty had expired. It was suggested we turn the unit off back on to reset the computer. We did this for 2 or 3 months and eventually it worked properly. We were gone for 12 days, now the icemaker has stopped and all food is frozen. I called - they will send a tech for a minimum of $95. Read how many trips are usually made before a problem is solved. Cheaper and more logical to buy another unit from anyone but Whirlpool.

I wish I had gone on this website and read the reviews before I bought my washer about two years ago. I thought the Whirlpool Cabrio was going to be a good machine because of the brand name and because it is one of the more expensive washers. Like many others have said, I am disappointed with this washer. I bought it because it has a large capacity, but mostly because it has a hand wash cycle and a deep water soak. I have found that the only cycle that actually may get clothes clean is the Bulky Items cycle, because it actually covers the clothes in water. Some of the other cycles dont even get the clothes entirely wet. And the deep water soak doesnt wash the clothes, rinse them, or spin them dry. I might as well pre-soak clothing in my laundry tub, and then put them in the machine to wash them. Prior to this machine, I had a Maytag Neptune front loader, which did alright, but it had a few problems. I am ready to go back to the inexpensive agitator machine my mother used to have, if anyone still makes them. They at least got the clothes clean, and you could soak clothing if you wanted to. Im sorry that I bought this expensive washer. I wish I had bought a relatively inexpensive, simple machine. One good thing about this machine though is that I was able to wash a sleeping bag on the Bulky Items cycle. So, I didnt have to take the sleeping bag to the laundromat. Whirlpool needs to improve this machine or go back to the drawing board and create a new one.

6 months after we moved into our new house our Whirlpool refrigerator froze up and we had it repaired. 6 months later the same thing. Still under warranty. 6 months later the same thing. I asked for a new refrigerator. They said it could not be replaced unless it was deemed unrepairable!!!! Now after 2 years with the same problem every 6 months I get in contact with corporate and advised to get an extended warranty because “they don’t replace refrigerators”. So an extended warranty will cost $350 this year and increases every year because the fridge is over 1 year old. Ok so I am paying to have it repaired with their so called warranty!!! We went to an appliance store and purchased a new not Whirlpool refrigerator. Will never buy anything Whirlpool again and let all my friends and family know of my experience.

Whirlpool Cabrio Washer WTW7340XW sounds like a small jet during spin cycle. The Whirlpool Cabrio Washers have a very well known and well documented problem with the tub bearings failing. Many many disgruntled owners have posted their complaints online, and there are many videos showing the issue on youtube. This issue is so prevalent that the manufacturer has created a tub bearing failure repair kit for $350. The repair is so expensive and labor intensive that many of the certified Whirlpool repair shops no longer work on the Cabrio washer stating that a better washer can be purchased for the cost of this repair.That said, the manufacturers customer service group denies that the Cabrio tub bearing failures is a common problem and are quick to state that Whirlpool holds no liability for this problem. Ramping the complaint up to a customer service supervisor is met with the same canned response. Regardless of the thousands of complaints Whirlpool is claiming that it is normal wear and tear for the tub bearings to fail. The manufacturer should recall the units for this manufacturing defect in the Cabrio design.

I am a retiree after 35 years and 5 months, the last 20 plus years on salary. I purchased a new Whirlpool washer on April 18, 2012 at Lowes in Tiffin, Ohio. The clerk said to take the receipt to Clyde to apply for my rebate. I was informed by a receptionist that we only get a rebate if our purchase is from Sears. I only went to Lowes because of the urgency and was not aware of this change in your policy. I consider this a real slap in the face after all the years of what I consider excellent service to Whirlpool Corporation.

I purchased a Whirlpool 50 gallon gas hot water heater 3 years ago. I have 3 daughters all in school age. When my old one finally quit due to tank failure and out of warranty, I went to Lowes and bought a 6 year warranty hot water heater costing around $600. Now I figured you get what you pay for RIGHT! WRONG! So about 2 years ago the pilot light started to just go out on occasion, a bit of an inconvenience but there was no default code warning me of any other issues. So typically we just relight it. I called Whirlpool to get help with this issue, but they wanted me to pay for a technician to diagnose the problem. Um isnt that what the warranty is for? I said dont bother. Im not paying $150 for someone to tell me what I already know. Ill just keep relighting it myself. So finally the pilot light goes out for the 100th time but this time I go to reignite it and BOOM! It sounded like a twelve gauge shot gun going off in my face! Then it flutters flames into the chimney of the hot water heater. Scared the crap out of me at first. But it finally stopped and run fine. Well Im laying in bed a few nights later and woke up to a loud thumping noise, I go down stairs and it stops. The following day Im in the kitchen and THUMP THUMP THUMP BURP BURP BURP. Run over to the hot water heater closet and theres the flames shooting out of the gas valve into the hot water heater then BOOM! Its out! The valve unit finally took a crap I guess. I call Whirlpool again to get my warranty - this time it definitely needs to be replaced. So the guy tells me the parts are covered in the warranty but a technician needs to look at it first and the technician Ill have to pay.. Excuse me but what the ** did you just say? I have to pay for a technician to look at your failing part? No I dont think so! Just send me the part - Ill replace it myself. Im a millwright electrician by trade. I specialize in power plants and refineries. Im sure this little gas valve wont be a problem. I spoke with these idiots on a Friday and he said I could have it ground shipped for free and it should be here in 5-6 days or pay extra for quicker delivery. What the hell did he just say? I could pay extra for quicker delivery on Whirlpools faulty part? ** whirlpool should be saying Well have the part overnight to you.Now since it was a 3 day weekend theres no sense in me paying $40 to have it delivered 3 day because it still wouldnt arrive until close to the five day. So I just looked to see where my damn part is because it shouldve been here by now according to the guy on the phone. NOPE! Its set to be delivered in 5 more ** days. DONT BUY A WHIRLPOOL PRODUCT. THEY DO NOT PRACTICE ETHICS.

I bought Whirlpool front load washer at Sears in June 27, 2012... (serial W104408696A) (W10409178A-SP). I had 6 episodes within a 1-year time that my clothes got burn holes and the inside of the washer. I would find a handful of gray powder after doing my laundry. The first time it happened, I thought that I left something inside my clothes that resulted to it, but I did nothing to contribute to the event. The second time it happened, I thought Im putting the wrong setting, so I chose another setting to wash my clothes. In that span of 1 year it was on and off happening. I read different reviews on this washer, and I am not the only one whos had this problem. Finally in 2013, before my warranty would expire, I requested for Whirlpool to fix the problem. Right away the tech told me that the problem was the glass covering, so they replaced it. Now my washer would not drain. I believe that this product does not belong in the market. If they knew what the problem was, they should have recalled it. I kept the sample of that gray powder.

I bought a WDT 720PADW2 dishwasher 15 months ago from Home Depot. In the last few months, it has begun to rust at the vent above the the handle. Whirlpool will not address the issue because it is out of the 12 month warranty period, yet is obviously a design flaw.

I have had the washer for 3 years now and it started to make a loud noise during spin cycle. I made a service call and found out the bearings are damaged. Something that cost this much money should last a lot longer. I have researched on the internet and found this to be the problem for a lot of consumers and would like to see something happen.

Whirlpool double oven. The electronic control board has been replaced twice and needs to be replaced a third time after less than a year. The thermal fuses go each time I run the self clean. Whirlpools response has been disgraceful, trying to blame the problem on faulty installation when thousands of people have had the same problem. Ignore ANY US companys product; their warranties are worthless and they repair, not replace. My next oven will be European because in Europe they have to automatically warranty for five years any consumer durable. Consumer Reports ratings are worthless since they dont include breakdown experience in the ratings. Never buy anything from Whirlpool. They sell rubbish and dont honor their own warranty. Check the BBB rating. My brand new double oven broke down the first time that I ran the self clean cycle. Whirlpools response was to claim that the cutout opening was 1/8 inch too narrow and therefore they would not honor the five year warranty that I had bought from them. This was a lie, as I verified the width and it was exactly that required. Others have had the same experience. Whirlpool also makes Maytag, Kitchenaid, Kenmore and Ikea.

We were at end of cooking salmon in CorningWare and the door blew open with amazing force!!! It is a double oven... Sounds like Whirlpool doesnt care so trust me we are not buying one ever again. :(

We recently bought a Whirlpool front loader even though the reviews kept mentioning mold and odors. I discovered that there was a water buildup in the soap dispenser so after every load, I remove, clean and dry the soap dispenser. The machine does a great job on cleaning clothes and I am following other suggestions on cleaning the drum from time to time. By the way, I bought my machine at Lowes from the scratch and dent department and with a little negotiating, I paid half price! Good deal and so far, good machine. Good luck and remember to remove and empty the water from the soap dispenser!

I purchased a Duet Dryer less than a year ago and it stopped working. Got the warranty people to send someone to diagnose it. The repair person ordered two parts to fix it (they took the control panel off the order for some reason). They sent a second inept person to try and install the part they did send and it did not work (He was the most condescending person I have ever met but that is another story.). Of course it did not work and they actually have to replace the control panel AND the electrical panel (which as you know was ordered by the original tech, but taken off the order by who knows?). Now they are telling me that the part that they should have ordered 2 weeks ago is on back order until sometime in May. All I am getting from Whirlpool is lip service and they honestly do not care one tiny little bit that I have a dryer under warranty that will not have been working now for close to six weeks. This is unacceptable business practices.For the record I bought the unit at LOWES and they too refuse to stand behind the product. Basically told me tough they have nothing to do with it. I also purchased an $8000 Kitchenaid (Whirlpool) Refrigerator 5 years ago and the control panel went out about 4 years later. They stopped making the part and I have to THROW away an $8000 refrigerator because they dont make the part for it. As evidenced above, Whirlpool products do not stand the test of time and when they do break (even under warranty), they cannot fix them in a timely manner or at all in the case of the refrig (not under warranty). I caution every reader of this diatribe to choose wisely WHERE you purchase your appliances and carefully select a brand other than Whirlpool (and its brand affiliates of Kitchenaid, Jenn-air, Amana and certain Kenmore products).

Aqualift is a Joke. We recently remodeled our kitchen and purchased a new Whirlpool range model #WFE710HOAE. It came with a feature called Aqualift Technology to clean the oven. The button you push to start it says Aqualift Self-Cleaning. I followed the simple directions and when it was finished I was surprised to find that nothing was clean. I tried it again with the same results. I had to then clean some of it with the enclosed scrubbing pad. You cannot use any cleaners except one that they also send a small sample of. In short, it was like the old days cleaning my mothers oven with a scrub pad and a lot of elbow grease. I spent 30 minutes getting it somewhat clean. I am so disappointed and mad that Whirlpool can just blatantly mislead consumers this way. No one wants to buy an expensive product such as this and have to clean it by hand. You get as good a result if you do not even use Aqualift. My last range lasted 20 years and all you had to do was take a wet cloth and wipe out the residue. Whirlpool is at best incompetent and at worse criminal and purposely misleading with this and other similar models and should recall or be forced to recall and replace these with a working technology. I am surprised that the Federal Government has not stepped in. I would be very supportive and would participate in a class action lawsuit on this matter. As I stated in the beginning, this product is a joke.

My husband and I, purchased this washer on November last year, I used twice before and I noticed that the clothes felt hot, but the cycle was COLD water. Now use it again until June 2015. In every cycle the clothes were hot, I started calling to get an appointment in June at the 1800-253-1301, but the system was down twice. Then in July then again the system was down, then August 10, system was down. I did not wait more and called back the next day, August 11, got appointment for the 20. A technician came, he told me that the hoses was switched, but I know the hoses was installed correctly, my husband was here at the installation. He knows the proper installation of the washers.

The oven was brand new and the computer went out with the warranty. Replacing the computer, with labor, was as expensive as the range. I have owned several similar ranges made by other brands and have had no major complaints. However, I will never purchase another Whirlpool product again!

Whirlpool Corp. stands behind its products. Bought the Cabrio Washer in June 2011. Lid cracked in October 2012 and was not covered under the Lowes extended warranty because they called it a wear item. However, our local Lowes store in Avondale, PA replaced it for us. In December 2013, the lid cracked again. I called Whirlpool customer service and they couldnt do anything. I called the Whirlpool corporate headquarters and was directed to a member of their executive staff. After explaining my situation, Whirlpool agreed to send me a new door free of charge and even pay to have it installed (which I told them I can do myself). Aside from the cracking of two doors, this washer is an exceptional unit. Its good to see Whirlpool stands behind its products this way, outside of the warranty period. I would guess that they always hear a lot of whining and complaining, but it seems if you explain things logically, people listen and are willing to help.

My issue is I believe that Whirlpool should pay for my tub and bearing part because the washing is only 16 months old. Because it went over the one-year warranty by four months, I shouldnt have to buy this part considering it is such a big break for such a young washer. Please advise if Whirlpool will assist me with this issue.

I got a Whirlpool washer front loader model number wfw9151yw. Every time I wash sheets, they go into a ball. I called Whirlpool. They sent out a service guy. He said do not wash sheets in a front loader. I called the store. They said call Whirlpool again. Then the second service guy moved the legs down about 1 in. The machine still not right. I feel Whirlpool should replace the machine or give me my money back.

We purchased a Whirlpool refrigerator in December 2017. Since July 19 we have had the same problem with the refrigerator three times. The technicians don’t know how to fix it and Whirlpool refuses to replace it. The customer service rep was ignorant on the phone and could care less about a problem. Even though there is a lemon law they refuse to replace the refrigerator. We have to defrost the refrigerator every 2 to 3 weeks so will cool down again. Whirlpool is the worst company we have ever dealt with customer service wise. Lowes will not do anything about it because it’s within the first year.

I have a 2 year old Whirlpool refrigerator with french door refrigerator on top & freezer on the bottom. I am now spending almost $700 to have a new compressor put in because Whirlpool wont back their products.

I purchased this machine three years ago. It is junk. I have had two washing machines and they lasted for years and years. Never had a problem with either machine. I purchased them from Sears. When I the Cabrio, I was told it was the top of the line washer for Whirlpool. Three weeks ago it started making a noise like a plane taking off. It wouldnt spin the clothes. The repair person said that it could be three different things the parts, for which, would cost in the vicinity of $200. However, since it was making such a loud noise and water was coming out from underneath the washer, he was certain the transmission was out. He said the noise was an indicator the bearings were gone. I didnt see much point in repairing the washer if the transmission was out because it couldnt be fix.There was a couple at Lowes purchasing a machine at the same time as myself. They said they had a Cabrio also and it was only two years old. It wasnt spinning the clothes either and making a tremendously loud noise. They told us this before we mentioned that we had a Cabrio also. I will neither purchase another Whirlpool product. Junk!

In 2012 we bought three new Whirlpool kitchen appliance back in 2012. The refrigerator has needed a drain pan replacement, and two air diffuser replacements. Of course, both air diffuser issues occurred just outside the one year warranty. Then the range oven has required two spark modulator replacements – again just outside the one year warranty. Whirlpool’s solution: buy another 1 year warranty to get it fixed; or buy a new Whirlpool appliance at a discounted price.

I am so unhappy and frustrated with this washer by far worst washer I have ever had!! Doesn’t wash clothes clean. Sometimes I have to wash things 2-3 times and then they aren’t necessarily clean. For what I had for this pair I really got ripped off!!!

The Worst experience with Gold Series Mod WRF 757SDEM01. Purchased from Best Buy June 2016. $2215.00. Within 6 months The interior light began going dark within 6 months. Our very reputable warranty repair service ordered a part that did not repair it. Was only temporary. They did figure out that the circuit board was bad and promptly took care of our problem. Next I kept noticing water appearing on our wood flooring. Let it go because it only appeared sporadically. Called Whirlpool only to find out they switched to a warranty repair service that was inept and inexperienced. Said he could fix it. Blamed it on a freeze-over so I let floor dry up then re-started and refilled. Thought he did fix it cause it made sense. When reassembling he broke to upper freezer try glide. Then 3-4 weeks later I notice one morning water again on my wood floor. The dripping had been running beneath the wood slats and had seeped up through the joints. Now the flooring wood has swollen and will need to be replaced because of this. This is the second time I had to unload all food and store at neighbors and give away. Extremely poor engineering designs as each time the ice dispenser is used, nothing prevents ice from flying out onto the floor ever since day one. Same with water. The release does not shut down to prevent water or ice from pouring out onto the floor when removing any size cup. The refridge doors must both be opened to use the lower level drawer. Loses much cooling with having to always open both. Next, weve come home MANY times with the left refridge door partially open because of the difficulty of the mechanism to secure at closing. This happens to us 5 times a week for three years-honestly!. This was the only refridge we could find that would fit our opening in a 20-yr-old home. The fridge is so heavy one man cant pull it out of its opening. Only 2 very small wheels in front and skids in rear stick due to weight. Weve confirmed this is not a spigot leak from the ice maker. Finally (but probably not) the ice container allow much air in because of having to open the left door that your ice is always melted together plus it too small for a family of two and ice must be purchased when entertaining. And to top it off, the human that took the warranty call this time is foreign and my wife could not get them to get our last name spelled correctly nor the phone number correct after constantly repeating it. This unit and model is an absolute lemon. Im going out today to find another unnecessary $2500.00 to buy another.

On July 30, 2009, we purchased a Whirlpool Gold French door refrigerator with the freezer drawer on the bottom. It was delivered on August 1, 2009. On August 3, 2009, the ice maker and water dispenser stopped working. After three unsuccessful service calls and the installation of various replacement parts, Whirlpool gave up the effort to fix the ice maker and water dispenser and delivered a new replacement refrigerator on October 15, 2009. Todays date is April 14, 2012 and here we go again, the ice maker and water dispenser stopped working. Luckily, I purchased a five year warranty on the unit. However, after reading all of the posts about fire hazard issues and other various issues with Whirlpool refrigerators, well probably go out and buy a new refrigerator and write-off the $2,500 that we spent for this refrigerator as a bad investment. We purchased a Whirlpool refrigerator based upon their reputation of providing sound products. However, based upon this experience, I can guarantee the folks at Whirlpool that our next refrigerator purchase will not be a Whirlpool product or a product of any subsidiary of Whirlpool.

I purchased this Whirlpool washing machine in July 2009. The repairman just gave us a $1400 estimate for repairs due to failure of bearings. This is an energy efficient, expensive appliance that we expected to last for years and we feel that 2 1/2 years of service is unacceptable. We did not purchase an extended warranty and Whirlpool said they would help with the cost of parts - not labor. We cannot afford to repair a lemon and so purchased an LG front-loading washing machine today. Hopefully we will have a better experience with LG as we will not be purchasing any more Whirlpool appliances ever.

Front load washer Whirlpool Model# WFW9400SW02, only had this machine for about five years and the main interface control board has gone bad. This part cost 1/2 as much as buying a new machine. My parents had the same washing machine for almost 30 years and no problems. Whats wrong with this picture?

I find this to have perfect storage space both in the top for standard refrigerator and the bottom freezer. I would recommend this not for the style, the amount of room but also the quality. I have not been disappointed.

WTW6340WW0 - When washing clothes, on the last spin it stops and gives an UL error message. I make sure all the clothes are level and restart at that point but still the UL error message appears and water starts leaking from the underneath of the machine. Weve reset the and unplug the machine but no difference. Please help on what else to do.

We will never, I repeat, never buy another Whirlpool, Kitchen Aid or Maytag (other than the Maytag dishwasher) product again. After just two years on the Cabrio washing machine, the bearing on the wash tub began to go out. As it was out of warranty, the cost to fix was greater than just buying a new machine. This was a known problem and Whirlpool failed to remedy the problem. Based on this experience, we went with an LG as a replacement. Before you buy anything, research it.

I took the Sears salesmans suggestion and bought a high-end quiet dishwasher. It worked wonderfully until it sprung a major leak. Computer told me the phone # to call. It took a week for the Sears repairman to come out and $79 fee to just look at it. He said the fitting between the sump and the pump came off and flooded water over the electric motor. Electric motor is shot! Cost to repair is over $400 and a 3-week wait!!! When and if a new motor is installed, only then do we know if the computer is also fried. This was a high-end dishwasher. Factory warranty just ran out. Repairman said this is a common problem with this model. DO NOT BUY THIS MODEL.

I have purchased many Whirlpool ranges for my apartment buildings that I own and operate. They never give me a problem with operation or length of service. I only have to replace them when a tenant does something dastardly to them. My husband and I remodeled our kitchen and we purchased one for our kitchen too!

I have had this washer for about 7 years. I have not had any problems with it. I wish that it is stingy with rinse water. I see suds on the items before the rinse cycle and it doesnt seem to use enough water for a good rinse. Therefore I use the extra cycle.

I just bought a Whirlpool Gas Range from Home Depot on 11/11/2014 and I am having problems with the oven. It is still under warranty and have five year protection plan. I called to have the problem fixed. Two technicians and the oven still doesnt work.

2016 Cabrio Washer - I had an 11 year old Maytag washer that finally gave up so rather than go through the repair I decided to upgrade to a new washer dryer and went with the Whirlpool Cabrio W/D pair. I am shocked at the washers inability to clean even the most basic of stains. I have to pre-treat clothes like never before, have tried every type of wash cycle offered and cant believe the amount of time it takes to clean clothes. Over one hour??? My Maytag may have agitated the heck out of a load but in less than 30 minutes everything was clean. Ive had to re-wash load after load of the most basic everyday stains. I was hoping the larger drum would allow me to cut my laundry time down but that is not the case, and find myself putting a few things in at a time so they get washed. Im stuck with this piece of crap and have only had it for one month... Cant wait for it to start breaking down and dealing with repairs as so many of these comments mention. I miss my Maytag!!!

Agreeing with many. How disturbing to buy a Cabrio Whirlpool washing machine about 5 years ago. I might as well go down to the river and wash my clothes. The bearings went out which means I have to be the spin cycle. I am hanging out my clothes on the line - very wet - until my husband buys the part and fixes it himself. I had my maytag for 25 years. An awesome, dependable machine that we laid to rest because of rust. We should have gotten another drum instead of buying this machine. Where are the engineers that are making dependable appliances to last a LONG time? We have not gotten smarter. Or we only care about the all mighty dollar. Make something to last a short time so that you have to buy again. We will do some extensive research the next time we buy a washing machine. Do not buy this machine!

I bought a matched set of Whirlpool washer and dryer. Within about 3 months the dryer quit running on any of its cycles except heavy duty. About a month after that the washer started messing up. First it quit putting in the bleach. Next it quit adding water except under the heavy duty cycle. Then after about another week or so it quit putting in fabric softener. After a couple of more months it only uses hot water. Now not quite a year after I purchased it the washer now only adds water in the wash mode and not the rinse cycle. Now all this would not be a problem except I had lost the warranty cards and in their website would not let me register it online.

Whirlpool WRF993FIFMOO: Refrigerator Problems: the doors do not close, both ice makers went out, The computer on the filtration will go off. Refrigerator had problems maintaining temperature since 8.12.17. The refrigerator no longer works. This is my second unit since 11.09.16. It came from nfm.com.

We have ALL Whirlpool appliances in our home. This was our second home so we were not here to use these for a long time. We were preparing our other home and our parents home to sell. Our French door refrigerator is almost 2 years old and we live here now. My husband opened the icemaker door to see why we dont have ice. There was a wire in there. We called the local Whirlpool authorized service man and he said the wire is not hanging down to connect it. He tried to channel a new wire and said it must be crooked in there, he cant get through the insulation (no channel). He asked us if anyone had ever worked on it. We bought it brand new. Home Depot delivered, unboxed and set up. He said we need a new door. Whirlpool will not stand behind this! I am so disappointed! I thought I was doing the right thing. Good name, made in the USA. I was wrong! I definitely do NOT recommend Whirlpool!! I am so sorry that I spent so much money on 3 homes of Whirlpool appliances!!

We got a deal on our stove/dishwasher combination, establishing a payment plan upon purchase. And as a bonus, when you have a brand name appliance like Whirlpool, that made us more secure with the purchase.

In July 2018 I purchased a coin operated commercial front load 27 in washer and dryer. It was placed in and used in a six unit apartment building occupied by 8 long term adults. Prior washers and dryers had been operational for years with minor repairs at times. In June of 2019 the interior cement center balance on the top of the washer drum broke with resulting damage to screws securing the center balance and potentially other unknown parts. This was reported to Whirlpool customer Care service and they referred me to one of their a repair services. The repair service in about early August repaired the washer.In late September 2019 the cement balance broke a second time and this was again reported to Whirlpool service who requested I notify their recommended repair service. On inspecting the washer the repair service stated the entire washer was required to be rebuilt. The labor for installation of would cost me $1,125 with Whirlpool providing the parts under their warranty. The $1,125 labor cost was just under what I paid for a new coin operated front load washer. I reported this to Whirlpool whose supervising staff, without any inspection of damaged washer as to determine whether the washer was fit for its purpose when sold as a commercial washer, rejected any replacement of the less one year old washer and insisted they would only pay for the parts and I would have to pay for the labor, particularly when the both the cost of the replacement parts and the labor would be substantially in excess of a new machine. Due to time and effort constraints the problem was resolved by simply dumping the defective washer and purchasing a new commercial front load washer from a more responsible company.

Whirlpool claims this technology works to clean the oven; however after one month of use and one casserole spill, we attempted 3x to use this system and the cleaning process was a total failure. The gravy spill on the bottom and mild oil residue on the sides from roasted vegetables was the same as before the cleaning cycle was tried. The cleaning kit accessory from the company was a joke. It consisted of 2 sponges and a small scraper! We purchased the slide in model WEE745HOFS. Buyers of any and all Whirlpool products with Aqualift BEWARE... It does not work. We have since replaced the product with a range with the traditional cleaning process system that has worked for decades in most major brands.

I purchased a washer from Whirlpool through Home Depot on August 7, 2014 and on Dec 31st, 2014 the washer broke. I called Home Depot and was told to call Whirlpool since I was still under a year warranty. After numerous calls I was referred to Advantage |Appliances, a company that provides repair services for Whirlpool. After a week the technician showed up and briefly inspects the machine to conclude that there were two problems with the machine: The controller is defective and there might be another problem since the water is not draining. An order was placed for the part and another week went by with still no part. I called the corporate office only to hear that it might take 5 to 7 days to receive it. In the meantime I had laundry piling up. I was forced to go to the laundromat with one arm in a cast and a painful lower back. I finally received the part on Friday and the technician arrived on Saturday to install the part and then announces that she was willing to fix the water pump but had to get paid in cash since this was not included in the warranty. Now mind you! This woman knew about the problem from her last visit but made believe that it wasnt a problem. Advantage Appliance makes money by extorting their customers out of money. This young lady stood there without blinking asking me to pay her $89.50 to do the job she was suppose to do in the first place. I purchased an extended warranty from Home Depot only to find out that they would not be able to do anything since I was still under warranty. I have never been so angry and want Whirlpool to take responsibility. I am sitting with a washer half full with water and no one is stepping up to do something! Whirlpool is disgusting! The corporate office was not friendly or nice about this situation. They dont care! Why do businesses like Whirlpool get away with this? This is not acceptable.

Am posting in regards to a brand new dishwasher that I purchased the first part of February 2020 from Menards. The dishwasher I bought is Model # WDT730PAHB and Serial # F94519386. I had the dishwasher 10 days and it stopped working after running only two times. I checked the breaker box and all electrical connections to the machine and it was getting electricity, but would not turn on at all. I called the store to return it and they only have a 7 day return policy. Since then Whirlpool has been contacted and I have had two service calls from Whirlpool. The mother board has been replaced (which I waited two weeks for the part & five hours for a service man) and still it will not come on. Now I am waiting on a wire harness, ordered on March 4th or 5th and still not here. I completely understand wanting to fix a broken machine, however this was a new dishwasher that only worked for 2 washes. I have now been without a dishwasher for almost 2 months, which in light if our current world situation isnt a huge deal, however this is a time when sanitation is very important. I feel like Whirlpool should offer to replace my new machine with a new machine and not something that is refurbished. At this point it is costing more to repair this machine than to just replace it. Every time I call Whirlpool I get the line of we have to repair it. Give me a break. Take care of your customers!!?? #neverbuyawhirpoolproduct

Oct 14th I walked down to our basement to find it flooded. Turns out the leak came from the solenoid that controls the water feed to our Whirlpool Gold Series refrigerator. Now, some $28,000 in damages later - floors/cabinets/walls/electronics - you name it. The repair company said that they replace these units a lot as it is simply a faulty design and Whirlpool knows this as this part is very difficult to obtain - too much demand. Well aside from the cost, the inconvenience, and the rise in our insurance rates the repair person said there was a good chance of the new part failing as well - it just cant take the water pressure as it is just cheap plastic. My advice - stay away from Whirlpool!

My Whirlpool washer would start up but would not add any water. It sat there doing absolutely nothing. Then it showed a code on the screen. It said to disconnect the power for 1 minute and plug it back in, which I did. I repeated that process several times. Still nothing. It also said to call Whirlpool, which I did. They wanted the Model # WFW97HEXLO and Serial #, I gave it to the gal on the phone at Whirlpool. I was told it would be a week before they could get someone out there to take a look at it. Really!! I work 80 hours a week and live in the country. I dont have a week. When I asked where the service man was coming from, he was coming from another town. I asked if there was someone closer. She gave me another appliance stores phone number. They showed up 2 business days later, looked at my washer, verified the code along with the Model and Serial #s, telling me it was the control panel. I gave that information to them on a Friday, they showed up on a Tuesday. They knew what that code was and what it meant for that make and model washer, but there just had to be a service call in there. The part was ordered on that Tuesday... here it is the following Saturday and the part still isnt here. I do not understand what takes Whirlpool so long to ship the part. Do they not care that in this hustle bustle life we live in, we dont have time to wait for a part that may or may not show up. Ship it overnight. That is an option. Making the parts accessible to the service people in a timely manner would make great customer-service. Better yet, how about going back to the old-style washers. This high-efficiency non-sense is highly expensive.

Purchased my Whirlpool dishwasher in 2005 model number GU2500XTPQ3. So it worked for about 10 years and I am fairly happy with that but I have a warning, my control panel shorted out putting out thick black smoke and I was unable to turn off the dishwasher. I had to turn off the switch at the breaker box. If my wife had of been the only one home she would not have known how to turn it off and would have had to call the fire department. I dont know if the short would have led to an actual fire but with that much heat I have to believe it would have. Warning, dont run the dishwasher when no one is home. Hope this helps someone.

My Whirlpool dishwasher washes dishes well, when it drain but it will not drain. I purchased insurance repair service from AIG. AIG is a total rip off. I paid them over $300. I have called many many times. They promise someone will call but not one ever has. I would never work with AIG or Whirlpool ever again.

I purchased a Whirlpool oven/range from Lowes in September 2016. It was working ok until the convection fan stopped working. I purchased the extended warranty for 3 years but the oven stopped working in December (3 months past the extended warranty). When I contacted Whirlpool to complain about the horrible product they have been selling to people, all they could do was suggest a repair company that charges $99 to come out and diagnose the problem. DO NOT BUY any whirlpool appliances. The name brand used to signify quality but the appliances they sell now will not last. BTW I may have used the convection function maybe once per month over the past 3 years ... So its not like I over used the oven.

Bought Cabrio 3 years ago, started getting ul code and f1 code. We leveled machine, but cycle kept getting stuck mid-cycle. Called repair guy, they say it is going to cost between 6 to 800.00 to fix???? Really. Its three bloody years old. Very disappointed. Do I now get it fixed or break down and buy another washer. I would not buy Whirlpool again. Very pissed.UPDATED ON 02/05/2015: We called an appliance repair company and initially paid $440.00. After installing a motherboard computer system, it still did not work. We were then told that the other part would be another $120.00. We were already soaked for $440.00 so we decided to pay. After that was repaired the washing machine was still stalling mid cycle. We were then told that it has something to do with the wiring and it would cost another $120.00-$140.00. Needless to say, we declined. Complained to whirlpool that machine was three years old. We are pissed and $570.00 out of pocket. Just bought a lg front loader and paid for a 5 year warranty!!

I just bought my washer 3 or 4 months ago. It is the worst washer I have ever owned. Anyone that has ever done laundry knows you need water to wash clothes. My clothes are not clean and my whites are very dingy. I use the same soap (Tide) and the same bleach (Clorox) that I have used for years. If I can find someone dumb enough to buy it I will sell it and get a good one. I would rather go back to the old wringer washers than this one.

Nice looking, prices very fair for quality product. Options are always good. My mom used Whirlpool. That thing that goes in the middle of the old time washer is now gone. That thing would rip or stretch out clothing bras. Anything that was nice it would make it look horrible. Ive had my washer and dryer for 6 years and they still work like new. When shopping for a washer and dryer I do look for capacity, energy efficient and the brand. I prefer to stick to the old school brands just like my mother did. I must admit that I do love the fact that it is an HD high efficiency washer. The deal-breaker would be a low quality construction made a washer or dryer nobody needs to have problems with it. If youre spending that type of money you need to get good quality items.I love my washer and dryer. Theyre both and white color. Its a Whirlpool Cabrio with HD High efficient load energy saver and H2 wash system. The washer has a lid with a see-through glass which I love. My dryer is also a Whirlpool Cabrio steam with a resource saver that gives me a lot of different options as far as my clothing is concerned on how I need it dry.

Purchased this washer 5 months ago. Have had service 3 times as dark clothes come out with white residue. I have done everything possible to correct the problem. They recommended from cleaning the machine, using less detergent, minimizing the load, using extra rinse, deep water and still the clothes come out with the residue. And it takes way too long to wash a batch of clothes. This is a known problem with this model. Repair company recommended a replacement and Whirlpool insists that it is a usage problem. One thing they said Could be water is too cold, I live in Florida there is no cold water! Whirlpool refuses to replace it. DONT BUY IT!!!

This was the first new appliance that I had actually ever had and I purchased it in October of 2010. After four months, it started make a grinding sound. I called Whirlpool and the repair man replaced the motor. Approximately four months after that, the lid got stuck and the machine would not respond. Same routine as before, but this time the transmission was replaced. While the machine was apart, I noticed the white insulating panel from the bottom was brown in a spot and looked as if it had gotten hot. A month before the 1 year warranty expired, the washer started making an intermittent grinding sound nearly identical to the sound made when the motor went out. This time a different service company was sent out my Whirlpool and the said that nothing was wrong. Now, the machine is out of warranty and has stopped cleaning close and during the spin cycle the you can hear water running into the machine constantly. Last months water bill shows a 40% increase in water consumption when nothing has changed to incur a larger bill. Seeing all these comments makes me wonder why the heck nothing is being done to force recalls on such poor products. Consumers should be treated with a lot more respect than this. I will never recommend a Whirlpool product to anyone I meet. In fact, I will strongly discourage anyone who is contemplating buying a Whirlpool washer machine.

At after 4 years of use, my double door refrigerator is giving cooling problem. Upper refrigerator part has excessive cooling and lower part has no cooling... after complaints in customer care, engineer was sent who changed the part that regulates auto cut... it gets blocked by ice so cooling air is not reaching lower part. Once changed exactly after 5 days same problem started... In spite of complaints no one came to check for good 2 wks. After long fight, it was defective board that was changed again. After 3 days same problem again, board was changed... Now after 2 and half month same problem. And now today service center has replied that engineer will be sent after one week.

Purchased a house and old owners left an almost new one with house. Thing does not clean even minor soiled cloths. Plan on buying new machine directly and it will not be a GE or Whirlpool. I can see why they were willing to leave the new washer. I left a 15-year old Maytag at my old residence (wish I had it back).

We got a brand new bottom freezer french door Whirlpool refrigerator in our brand new apartment. Since we moved in last week the temperature control in the refrigerator box has failed three times. The freezer stays cold but the coils are frosted solid and no cooling gets up to the refrigerator box. We turned on moisture control but that didnt help. The users manual is completely useless and in fact doesnt even match the control panel. The numbers for temperature settings on the instructions dont match the numbers on the panel.We had to turn off and thaw out the unit completely three times already and this is just the first week! Last night the building maintenance guys came in and sprayed the back panel of the freezer with warm water. He said he talked to the GE tech, who suggested we also increase the freezer temperature settings to 4 and the refrigerator to 44. But this morning the temperature rose again. It sure sounds to me like the daily defrost cycle isnt running at all and nobody wants to consider that possibility. Thaw the unit several times a week is completely ridiculous. Our food has experienced so many temperature excursions who knows whether its any good now. I cant wait to get my first taste of salmonella. This is what you get when you combine junk with poor service.

Do not under any circumstance end up with the Whirlpool fabric washer and or dryer in your dwelling to wash and dry your clothes. The washer, model # WTW7000DW0 and dryer, model # WED7000DW0. I am so upset with these units and the company I bought a 5 year extended warranty thru. I cannot put down in words what I think, because this review would not be published. Do not even accept these units, even if they are free. Even the repairmen who have been here said they would not buy these Whirlpool junk washer and or dryer series. They acknowledged the problem and said nothing could be done even though there is a legitimate problem. Not only is there a problem with the washer, the dryer as well has serious issues. All washes have to be put on the deep water cycle and some loads have totally dry spots on clothes where the clothes did not even get wet after the washer went thru the complete cycle. Also, get this, this washing machine even has to be cleaned itself with a cleaning tablet run thru a cleaning cycle. What happens are the clothes get a nasty, slimy, white muck on them. Even, immediately after the washer gets cleaned, sometimes the clothes 32nd up with this muck on them again. If you do not see this muck on your clothes before putting in the junk dryer, then the clothes have to be washed and dried again. This washer is supposed to be efficient, not a chance. It gets costly having to purchase the cleaning tablets and the washer(28th only two people in the household) has to be cleaned a lot more than what the manufacturer says and I called and asked. Pure junk, do yourself and even your enemies a favor, stay away at any cost, and like I said, even if they are free.

I purchased a Whirlpool dishwasher on March 13, 2007, along with a 3-year extended warranty. Well on Nov. 15, 2011, I had a part in the control panel go out, so they replaced it and they charged me $129.00 for labor and $29.18 for the part. My dishwasher is doing the same thing. It doesnt finish the cycle and I have to restart it, so I called the repairman A&E. They said the part is only guaranteed for 90 days. The part only lasted six months! Its the same part and the same problem. It should be considered a defective part. No matter how many you have replaced the part, it is going to need to be replaced and at $160.00, I cant afford it. They should have to pay for defective parts. Also on this model GU2600XTPSI on the panel buttons, the start button was made with this puffy plastic that has pulled apart and now it looks terrible! None of the other buttons were made this way. What a crappy workmanship, they should be embarrassed. This dishwasher was not cheap; it cost $650.00 plus $50.00 for the warranty. 4 years is too short of a time to have to replace any home appliance. There are appliance out there that are three times as old as mine and they are still working. I guess in the last 10 to 15 years, big companies dont care about their products or the people who buy them, just about their profits! I will never buy or recommend Whirlpool products.

My water heater was installed in 2007 (model BFG2J5040T3NOV). It has required 3 repairs in 4 years because part failures make the pilot light shut off. The gas controller was replaced in 2008. The manifold/burner assembly was replaced in 2010. This month (August 2011), I have replaced the thermocouple, which did not fix the problem. Now I am having to replace the gas controller again. The part is failing, but not completely inoperable, so occasionally when on the phone with customer support, the pilot light would stay lit. When this happened, the tech would act as if the problem was solved and tell me to call back if the pilot light went out again. The next day, the pilot light would go out again. Thus, I have spent several hours on the phone with customer support running the same tests and answering the same questions over and over again.

Whirlpool Cabrio - What a nightmare. One year in… from the beginning the washer completes a cycle without attention. It gets stuck in a rinse cycle and eventually stops with an FF error display. Because of this it wastes HUGE quantities of water and takes far too long to actually wash clothes. It is so frustrating. We will buy a new Bosch and THROW this way. We cant even pass it on to our grandchildren.

I love my washer and dryer but am a little disappointed in a few areas. First, my washer stopped spinning normally after a few years, I forget exactly why. Then my clothes were too wet when it was done. My dryer then did not get my clothes dry in one cycle. Also, it was going to cost $500 to fix my washer which wasnt worth it. But Whirlpool did send us a new tub and all the parts for free. Thankfully my husband is handy and after finding a YouTube video, replaced it all and now it works again. My dryer still doesnt always dry everything all the way. I often have to do 2-3 cycles in the dryer to get my clothes dry. I thought there was supposed to be a sensor that would keep the dryer going until there was no more moisture. Maybe that is broken too.