We purchased a Whirlpool over the range microwave WH32L19AS1 just over a year ago. {No we didnt buy the extended warranty.} We were reheating some food in the microwave at noon the other day and the microwave made very loud bang and started to hum really strange. We have since discovered the Megatron or something like that has gone out. Just parts $150.00. So we decided to trash the broken Whirlpool microwave. We did some googling and discovered that there is big trouble with this product.

Washer Whirlpool Cabrio - Needless to say now, spin rinse not working, dark spots in clothes, sound like a jet leaving the room and earthquake at maximum potential when working, all previous reviews more than summarize my problem with the washer. How can we do to take a class action against Whirlpool for the defective Cabrio wash and dryer they are selling. If anybody knows, please guide me the right way to start it.

Please contact me if a class action Lawsuit has been filed for I am one of those who spent close to 3,000.00 for a lemon and to get the runaround. I spent every penny I earned to buy a long lasting fridge (Whirlpool Gold Series) only to have a headache ever since I bought it. Only owning a year the freezer went out, yes I had to endure the loud noise, no ice. Then the thing would spoil my milk and ham making my stomach to be sick. The temp is 60•. The people that Whirlpool sends out are in cahoots. Told me my compressor is out and I just heard it kick on. We are currently using refrigerator we brought out of the travel trailer kitchen because this thing sucked out all my money.

We bought a refrigerator Model# WSF26C2 EXB last June 2012, and it broke down! Our one-year manufacturer warranty did not cover for any food loss. We would not recommend Whirlpool refrigerator to anyone. We called at 12:30 pm and they could not send anybody out to repair the refrigerator until the following day. Bottom line is, there is no compensation with Whirlpool.

We bought a top loaded Whirlpool washer, model WTW5000DW2 last May from Lowe’s for a summer beach cottage. It has been a terrible experience. There was a 30 day warranty from Lowe’s which unfortunately we missed because we had not moved down for the summer till after the 30 days. Working through Whirlpool, they sent an independent contractor out 5 times over the summer. Control panel was replaced twice. It never worked properly. I’m now back for the summer, and it still does not work. Do not buy this washer.

I have a gas range Model WFG540HOESO Airlift self clean. When anyone reaches across or leans against the range, ever so slightly, the knobs turn and gas is released. It is EXTREMELY dangerous. The Airlift self clean has never worked. When the repairman contacted the technicians at Whirlpool, they told him that there was nothing they could do. In other words, I am stuck with an oven that will not self clean. The water in the bottom does not even come to a boil.

I bought this washing machine after having my Kenmore for 20 years. This washing machine is a nightmare. I have to wash my clothes 2 or 3 times, to get them clean. Everything has residue on them. Once a month, I do use a cleaning tablet, and between loads, I wipe the washer out too! This is the biggest piece of junk! Save your money. Buy an old school washing machine.

I absolutely HATE this washer! These pics are of jeans AFTER they came out of washer. Its energy efficient for sure...doesnt use enough water to fully wet the jeans. And, yes, I know how to choose the correct settings. See how wrinkled the jeans are? That is what all clothes look like after being washed in this washer. Dryer isnt any better. It does dry them, but they are so wrinkled they look like they were just pulled out of dirty clothes hamper. I was a Whirlpool fan up until this set. I realized before my 30 days were up that they werent cleaning my clothes well. I went back to Lowes & set up a date & time for them to be picked up. Salesman convinced me that I just wasnt use to this new type of Whirlpool washer/dryer. Plus he insinuated I was being a problem customer who was lying about the poor performance of my set. He said they had sold a lot of these W/D and NEVER had a complaint. Dummy like I cancelled the pick up. I would not take another set of these if they were given to me. If I could afford it I would give away this set & buy something else. Anyone still interested in Whirlpool Cabrio W/D after reading my review? If so, Ive got a set I will sale you for what I owe.

I like this refrigerator. Its a two door. I did not get an icemaker and I have plenty of freezer room. The milk will stay fresh at least for a month. I like the crispers. They keep my food fresh. It keeped the Romain lettuce very fresh on the package, it was pick 7/31/2019 and just have a fresh green Salad Sept 6, 2019. Easy to move when wanting to clean the floor.

I have recently bought a Whirlpool Cabrio washer/dryer combo and I wish I had read your reviews before doing so. I spend quite an amount of time washing, re washing, rinsing dark clothes to end up washing them by hand as the washer leaves unsightly white streaks on them. I have tried switching from hot water to cold, using very little detergent, buying clear detergent, then organic detergent, extra rinsing, etc. to no avail. Very frustrated and disappointed. I would gladly join any class action to stop Whirlpool selling these useless but expensive washers.

We bought the over-the-range Whirlpool microwave, model #WMH53520AH-1, about four years ago from Pacific Appliance Sales Kitchen and Home inside a Best Buy store in San Diego. The Magnetron and Diode have malfunctioned and been replaced. Now the plastic around the door is falling apart, cracking, and splitting. This is unacceptable, poor craftsmanship, and low quality for the price of this Whirlpool appliance. This needs to be reported to the company and properly addressed. Until then, were staying away from any Whirlpool related products. We also own Cabrio W/D. The washing machine has had problems from year one. Im submitting a separate review for this appliance. Consumer beware!

We have a Whirlpool double oven that is about 3 years old. Today we used the oven for lunch and about 2 hours later we heard a loud sound from the kitchen. When I went to see what had happened I found glass shards all over the kitchen, some as far as 10-12 feet away. The outside glass of the top oven was spider-webbed and had apparently exploded. Nothing had come into contact with the oven and nobody had been in the room with it for over an hour, it just randomly exploded. I am going to contact Whirlpool but judging by the other posts I dont expect much help from them.

I posted about our problem with the Whirlpool water heater on the 20th. Chris ** of Whirlpool called me back. He totally took care of the problem and got us back working. After 3 years, our problem is resolved. I am grateful to Chris for finally resolving the problem. He was professional, courteous and knowledgeable. Thank you.

I completely forgot that I wrote a review on our Whirlpool hot water heater model FG1H5040T3 Nov in 2010 until I received an email telling me how many people read my post. Surprise, Surprise guess what we are having problems with again. You know how nice it is to have hot water anytime you need or want it. Well, not at my house. The hot water heater worked for about a year (Im probably being nice with the time here). Heres our problem now, once the water heats up the pilot goes out. It will not stay on. Ive noticed that if its full the pilot light will not come on, so we have to run some water to be able to light it. Well I called customer service, a waste of time. The guy told me that my heaters warranty expired last year and his suggestion is to go buy another heater. REALLY! All I wanted to do was order a part for it. He did send me an article with suggestion of things to check. Sorry, we already did everything in the article, another waste of time. It seems we are not the only ones (model #) with problems with Whirlpool. Whirlpool used to make good products but its not anymore. I will NEVER buy another Whirlpool product again.

I bought a Whirlpool over the stove microwave. It was to replace a GE that was over nine years old. 40 days after purchase and installation the plastic started chipping and peeling. I contacted Whirlpool customer service and was told that it was a cosmetic problem and my warranty stated that I had thirty days of warranty on cosmetic problems. This was a problem because chipping and cracking didnt happen within 30 days. The chipping and cracking continued to get worse. I again called customer service because the warranty stated that workmanship and bad parts were covered up to one year. I was told that because it was over my stove that this was to be expected. I thought this was a dumb answer because had I known that an over the stove microwave would have problems from cooking I would have installed it in my living room over the television. I called customer service several times. One of the times I called I talked to a representative who actually acted as if she wanted to help me. She suggested sending an e-mail with pictures and gave me an e-mail address. I did this and got no response. I was getting close to the warranty expiration date. I called again and was told that pictures wouldnt work; I would have to pay to have a serviceman come out and write a statement saying that it was not cosmetic. The cracking and chipping is so bad that I cant clean parts of the door because the cloth or sponges catch on the cracks. The door on the GE microwave did not look as bad after nine years of use as the Whirlpool does after 1 year and 8 days of use. I am not the smartest person in the world but I know the difference between poor quality material and workmanship as opposed to cosmetic problems. Im pretty sure that if my wife put her makeup on and pieces of her face started cracking and falling off she wouldnt want to hear that it is not a real problem its only cosmetic. Bottom line is I am very dissatisfied with the poor customer service and warranty problems I have experienced. I will not buy another Whirlpool product and would strongly suggest to others to buy any brand but Whirlpool.

I bought Whirlpool hot water heater with the Honeywell part in 2014 and the thermal box went out. No flashing lights, no way to reset. I understand that Whirlpool had a class action lawsuit after researching. Still selling this product to consumers. Whirlpool should be held responsible, and be made to give an allotment to replace homeowners with hot water tank of choice! If lawsuit is active please add my name.

I used their website to schedule an appointment for an estimate for a repair on my oven. I was never told they were sending an independent contractor to do the repair nor that there would be a charge for the estimate. I contacted Whirlpool and was told there is nothing on their website and I should have asked the service technician before he was at my door if there would be a charge. Therefore, it was my fault and I indeed had to pay the charge when I declined to have my oven repaired. I paid an independent contractor hired by Whirlpool for $129 to give me an estimate on the repair to my oven despite never being told of such a charge prior to the appointment.

Last year I purchased a Whirlpool washer at the suggestion of a friend who works at Lowes. It was dented and reduced, but my 20 year old Maytag, although still chugging away, was due for replacement. Am I sorry I did! My husband has recently broken his hip and we were caught in Hurricane Matthew just 1 day after I brought him home. We were forced to evacuate. Upon returning with a mountain of laundry, I found my washer lock light blinking although the washer had not been running when we lost power. I tried opening it but could not. I unplugged and reconnected power to no avail. I called customer service only to find we had to wait 2 weeks for a Whirlpool repair person. He arrived yesterday (Oct 26, 2016) and charged $95.00 to tell me this was an almost universal problem with Whirlpools and the company was aware of it. He called this morning to tell me the required part would cost $495.00! The entire washer cost approx. $500. He stated that he thought Whirlpool should have covered the cost as it was not far out of warranty and a known defect, but he could not get Whirlpool to assist financially. I tried calling myself for an explanation of the fact that they knew these machines had a defective part and yet they sold them. I got a song and dance from the rep. Although my husband was unable to help and I am a 65 year old woman, I went out and bought the cheapest machine I could and manhandled it home and connected it. It is afternoon and I am on my 4th load of well overdue laundry, no thanks to Whirlpool. I intend to make this story public through every internet forum I can find. I have a large extended family and friends and I will make sure they do not purchase Whirlpool appliances if they are looking for a good product and good customer service. I will also be sure to never buy a Whirlpool appliance again.

You cannot control anything on this machine. You cannot pre-fill to dilute detergent- you cannot choose temp because what you choose is changed by the machine (manual). You cannot choose your own combinations of temp, water volume, and timing. Once the ** thing starts you cant change anything, like the setting you wish to use. Do NOT BELIEVE THIS IS ENERGY EFFICIENT. There is a REASON that this machine has a 2nd rinse. It is because so little water is used that it does not allow soap, lint or dirt to have anywhere to go but back into your clothes. YOU have to trick it out to get enough water to actually get some loads truly wet. EVER! You stand there like an idiot opening and closing the lid just to get enough water to dilute the detergent. You cant pre fill and then add your detergent because, it needs to sense your clothes load. Wont fill with the lid open. You cant rinse the detergent cup out. You only get to do what Whirlpool already knows about your needs. Oh & lets not forget the spin cycle. When you open the lid, large items like sheets will look like a pancake made from one of the sheets. However underneath will be a tangle of the rest of your wash worthy of a Gordian knot. You can yank your shoulders out trying to dislodge the clothes. Spin yes, I guess it did, I just didnt need permanent press wrinkles. And thats if you CAN actually open the lid. For some idiopathic reason the lid may be on lock. Good luck with that. Most often, youll find no reason that you can discern like an unbalanced load or as the booklet suggests, you havent figured out how to load a machine. I hate the design of this so much that I called the company and they said that they would send a repair man out to see if its working. Whats he going to do? Run a couple of washes and say hey thats how they design these things? They will not replace it. They do not stand behind their products. You are stuck with bad design period.Describe Yourself: Frequent User. Service/Delivery: It came with a big dent in the dryer we bought with it. Installer dudes crossed the hot with the cold. Whirlpool will not stand behind the products they make & they make lots of the brand names. So they figure they can just do exactly what they want and youre screwed because even under warranty, theyll only fix the mess of engineering they designed in the first place. Bottom Line: No, I would not recommend this to a friend.

Whirlpool Energy Efficient Top Loader - I re-wash at least 20% of all clothes because they have dark spots AFTER washing them, but NOT before! It is a moving target, wash out one dark mark; get another somewhere else. I bought great quality sheets that are permanently stained, because of this. No matter how you load this machine, anything with arms and legs gets entangled into a big knotted mess. It is difficult to separate them and time-consuming. This puts a lot of stress on the clothes, especially as the load spins. I also re-wash entire loads at least 4 loads because the clothes dont rinse properly. I bought a 5 yr. extended warranty and have had this serviced at least 4 times to no avail. THE PROBLEM IS IN THE DESIGN! I am POSITIVE of it. If you have these problems, as well, please contact me. I would love to investigate a class action suit. I am THAT mad.

Recently, I was having a problem with my Whirlpool gas range so I contacted the 1-800 number. Long story short, the repair cost was so high I would be better off getting a new range. But believe me, it will not be a Whirlpool.

I had purchased fully automatic top loaded WHIRLPOOL WM 360 BW PRO-HS 9.5 on 08/05/2019. I had purchased the above machine after going through the various claims made on the website. However, I regret to say that since installation I find that the performance of the machine is not up to my satisfaction. Even after two visits by the engineer, the following issues remain:(i) The machine makes lot of noise in the initial stage.(ii) Though the timer shows a particular time during selection of a washing cycle, in reality the machine takes one and half times more than the timing shown. In case one selects warm / hot water, the actual time taken is twice that shown or more. I am sure in winters it will take more time in case warm / hot water is selected.(iii) The clothes get badly entangled during wash.In the past I had a LG front loading washing machine which never gave me any problem. I had gone for the best top loading model of Whirlpool hoping for better performance but it has only caused problems. Not worth the expenditure.

I purchased an 80-gallon electric water heater in 2009 with a Lifetime warranty. When the unit failed in 2021, I was told that Whirlpool no longer manufactures an 80-gallon tank. I was provided an R/A# and was told that Lowes should honor it with a like-kind replacement unit. Lowes originally suggested I order an AO Smith Hybrid online, (at my expense), return my old tank, and they would reimburse my account. When I went back to confirm this offer, it was adjusted to a $200 credit (suggesting that was the value at the time of purchase). Later, Lowes again adjusted their offer to cover $650 toward a replacement 50-gallon tank with a 6-year warranty and 30-gallons less capacity. Other manufactures do produce 80-gallon tanks and Lowes does have AO Smith tanks available online only. I would have to pay the difference beyond the $650 offer.I purchased the original 80-gallon tank because I need the capacity and I assumed the Lifetime warranty would allow for an even trade if/when something went wrong. The proper solution would be for Whirlpool/Lowes to offer a replacement value for any comparable 80-gallon tank regardless of the manufacturer. Currently, similar tanks average $1300-1500. (Westinghouse w/ Lifetime warranty at Home Depot). Lowes should also be able to order the tank for in-store delivery as opposed to having me order online at my own expense. Meanwhile, the current tank is leaking and will soon be out of service...

I bought a Whirlpool Gold refrigerator four years ago, June 2012. Today, 9/20/16, I found out that the ice maker has to be replaced to the tune of $350! The repair person told me that Whirlpool has the worst track record, and of his service calls, he has at least three to five Whirlpool refrigerators per week! This is a terrible lack of quality. When youre spending over $2,000 for a refrigerator, you expect it to work for more than four years. Not only that, but I have e-mailed Whirlpool Customer Service twice and have been ignored completely. This is my last Whirlpool product, and I urge you to stay away from them. Samsung has a much better track record.

I purchased a Whirlpool refrigerator (model number GX5SHDXVQ02/K02778282) on 9/18/2010. It broke down in 1 year and 8 months; the circuit board control went completely out and ruined all my food. Whirlpool stated I was beyond the 1-year warranty and said there was nothing they would do, except sell me a 1-year warranty for $299. I was at their mercy, so I purchased the warranty for $299 and had the fridge fixed. I would like to be reimbursed at least for the $299 warranty charge. This company should be ashamed of manufacturing such a flimsy product and not standing behind the item to protect their name.

I purchased a front loading Whirlpool washing machine March 2017. I have need to have the drain pump replaced and the motherboard replaced. Each repair took 30 to 45 days to get parts and service. I would not recommend the washing machine.

I bought a Whirpool side by side model GSF26C5EXW00 on 4/24 from Lowes in Buford, It was delivered the next day.We followed all the start up directions. You know what a mildewy moldy towel smells like...Well that is what the water and ice smells and taste like coming out of the dispenser. I have had the technician to my house 6 times. the tap water taste good, the water coming out of the line leading to the refrigerator is good. Gee is must be something in the refrigerator! How many times do they have to come out before they actually do something about it? Like replace it or give me my money back.

Whirlpool anode rod went bad in 2 months. Called Whirlpool, would not stand behind warranty. Had previous hot water tank (not a Whirlpool) in for 10 years with same well and water conditions. Also noticed Whirlpool hot water tank is not nearly as efficient on energy use. Overall, this is a very poor water heater and even worse customer service to not replace a part that was under warranty.

I purchased a Whirlpool electric water heater in August of 2008. The unit had a 12-year warranty on the tank. On January 21, 2012, I discovered that the water heater sprung a leak somewhere in the tank shell; it’s not the pressure relief valve, thermostat or anode port. The tank was never abused and operated well within its design limits. Not sure what caused it to start leaking into the catch pan and out onto my laundry room floor.I purchased the tank at Lowes and went for the longest tank warranty to reduce replacement intervals. I sent Whirlpool an email on 1/22/2012 explaining my problem and I referenced this site. The next day 1/23/2012 I receive a call from Whirlpool (Chris) asking me about my problem. I explained again and they gave me an RMA number and told me to go to Lowe’s and they would replace my hot water heater. I went straight to Lowe’s customer service and within an hour I was on my way home with a brand new hot water heater. Thank you, Chris, Whirlpool and Lowe’s. I am very happy with my outcome on this issue.

Washer is very mobile. Dryer does not dry. Refrigerator temp is never correct. After reading complaints, I firmly believe you know what the consequences of your products. I would never recommend Whirlpool again. I have used Whirlpool products since 1970 and always had good appliances. Your new products are worthless and you are spending more money on legal protection and lobbying than making a worthy product that actually cleans clothes and cools food. You are charging thousands of dollars for a worthless product and paying thousands of dollars for legal protection with warranties written to excuse your worthless product. Put your money on improving your products.

I purchased a Whirlpool washing machine (new) in 2004. From the beginning, I had problems with the spin cycle. I phoned Whirlpool. I paid for service with no reimbursement. With the costs I have had for service, I could have purchased 2 machines. I have had to go to Laundromat to do wash then come home to dry. I have for 30 years only purchased Whirlpool large appliance. My washer and dryer were always refurbished but they were Whirlpool. I have had a (refurbished) Whirlpool dryer since 1997 with one (1) service call. However, this wash machine, purchased new, has been a money pit and a piece of trash with Whirlpool only giving lip service when calling. Also, going to the Laundromat, I have been amazed at how many individuals I speak with are there doing wash because their Whirlpool washer, mostly even newer models than mine, do not work! And they have the same story. There’s no service when you call. Shameful Whirlpool! Buy your parts from us. Maybe your credibility could be restored. But I will never purchase your Whirlpool or other names under Whirlpool! When I do get another washer, yours will be put on my front lawn with a large sign of your disgraceful products and service!

I am a single mother of a 5 year old and I take care of my mother as well. I purchased a whirlpool because I believed them to be reliable, boy was I mistaken! I am in the military and while on an 8-month deployment I got a message from my mother that the washing machine had stopped working. Here is my mother who cannot drive - with laundry bags and a 5 year old in tow walking to the laundromat to wash, only to carry wet laundry back to the house to dry. Thanks a lot Whirlpool! My cousin in Michigan tried to help my mother with the company and a repairman as much as possible from over the phone. Here is what I got:The washer repairman came this morning. He did the diagnosis but I did not approve the replacement parts and repairs. First of all, he said that the motor control board was bad. To replace it with a new board would be $503 and a refurbished one would be $490.03. If the motor control board was replaced, it might fix the problem with the user interface. If not, the cost to replace that would be $302.62.Apparently there are 4 boards that could have problems. He also said there was a problem with the start button. Anyway, we ended up paying for the service call ($129), but I thought the cost for the replacement parts was too much to justify when we could get a new one for about the same cost. He recommended that we get a Service Contract when buying something new because of the cost to replace the parts.While doing some research online, unless you purchase an extended warranty or have experience in 2M; you will be researching new washers every 2-4 yrs. What happened to built to last? It seems to me all this technology/circuit boards/computers to make things work have degraded the appliance quality.Im sorry for the bad news but I just wanted you to have all the info. Let me know what you think. I know the washer is only a little over 2 years.

For the second time in 18 months, I have had to replace the top shelves on my refrigerator (Model #ED5VHEXVB01) because the cheap plastic borders have broken. The first time it was covered by the 1 year warranty, but this time (12/11) Ill have to pay $130 just for one shelf. Unless the quality of the product has improved, Ill probably expect to have to replace them again within the year. Needless to say, Ill never buy Whirlpool products again. Im out $130 because Whirlpool will not replace them for free because the product is no longer under warranty.

Twelve years ago we bought an LPG Whirlpool range for our new home in Rio Rancho, NM. About 5 years ago, a tenant at our home reported a gas leak and the propane company determined that the Whirlpool range was at fault. The dealer in Albuquerque repaired the leak, by replacing all the valves at a cost of $470. A week ago, after a propane fill, once again, at least one valve was found to be leaking. Apparently, Whirlpool does not know how to make a valve that holds up over time. Over a 7 year period, I paid almost double the cost of the stove, only having to replace it at 12 years. These stoves are DANGEROUS! I will not purchase another Whirlpool product for the rest of my life.

I purchased a Whirlpool oven 14 months ago. I just paid it off 2 months ago. The oven stopped heating. I talked to Whirlpool... and basically because I did not purchase the extented warranty I am SOL. I will never buy a product from them again. Complete junk.

I bought the washer Whirlpool duet on June 2009 (2 years and 2 months to date) and suddenly gave me an F70 code and died on me. It would cost me about $550.00 for parts and $129.00 for labor which is almost $700.00 in total. Its a communication error code where the CCU or the Motor Control Board was the culprit. I called the company for a concession consideration and they said they go by the warranty period. I should have read reviews for this company washers. Now, I have to find myself a better washer. I will never buy Whirlpool again. What a ripoff!

Whirlpool refrigerator WRT1LTZW00 - Bought refrigerator, works ok but makes noises that will wake you up in any room of the house. Had Whirlpool products for over 40 years. Why would someone make something that noises. Service came, said they all like that with new gas, cant do anything. Find hard to believe this was consumer tested. 6 weeks old, cant sleep with noise. Has anyone had same problem?

In 2002, I purchased an EE3Z50RD055V 50 gal. Whirlpool hot water heater. Recently several solder joints on the computer module became unsoldered so I cleaned the joints and resoldered them. But several months later another joint became unsoldered so I thought Id just purchase a new module. I called 1-877-817-6750, explained the problem to the young lady. She informed me that they would ship me a new one overnight. I asked her how much this would cost and she told me there would be no charge as it had a lifetime warranty. SURPRISE! Thats what I call customer service! A few years ago, I purchased a Whirlpool Duet front load washer and dryer. Now Im twice as glad that I did. My wife and I LOVE the Duet.

My Whirlpool is reliable, however it does not have a soaking cycle which I would enjoy having. It also has an unbalancing problem when speeding if I attempt to wash heavy loads on the extra large load cycle. However, it responds very well on large loads for heavy washing. Shortly after I got it the timing had to be replaced, but no problems since then. Overall pound for pound for the dollar it is a good machine.

Have always loved Whirlpool. Like the silverware in the door. Doesnt take up space for other dishes. Cleans well and quiet. Trusted brand and would highly recommend Whirlpool. All of my appliances are Whirlpool, stove, refrigerator, washer and dryer. You might call me a diehard fan.

I purchased this machine in April and already, the right leg is rusted and the under seam of machine is rusted. I have throw rug under it and where the leg is, there is rust on the rug. I called service from Whirlpool and 2 servicemen came out. The first one told me I was loading it wrong and the water was splashing over the inside tub to rust the leg and I asked, So why is the seam under the machine rusted? No answer. The second one came out and told me he could not find anything wrong with the machine and doesnt know why it is rusting, but he never gave me a paper to sign off on. He also said that maybe it was rusted when it was delivered. Not!!! Then I call P.C. Richard in Watchung, NJ where I bought the machine at and told them about the problem. They sent a serviceman out and he said that the bleach condensation is causing the rust, its known fact that this machine has this problem. He said that the water does not run through the dispenser but there is a model that does. I want a credit on this machine and get the upgraded one. It states on the machine that I can use bleach but it doesnt say it will cause rusting. I want you to tell me how a 9-month-old machine is rusted on one leg and the seam underneath is also rusted!!!! I had a machine for 10 years and it wasnt rusted. I am very unhappy with this product and with the customer service of Whirlpool. This is my first Whirlpool washer and I would not recommend this washer to anyone. I paid $600.00 for this washer and it should not be rusting.

I’ve had the dishwasher for at least 3 yrs. if not longer. I have a long history with Whirlpool products and so far I haven’t had any problems with my past purchases. They normally wear out from age because if you take care of it normally they last for years.

I own a Whirlpool Cabrio. I wanted a newer technology (no agitator) washer with top loading capabilities. I ended up with a four to five-year lifespan with this washer. The bearings are busted and it leaks water from the bottom. I have followed loading instructions specifically. It will cost about $1,000 to fix so of course, I am buying another washer and a matching dryer.

I have the top load Whirlpool. Its very roomy for my covers, rugs & towels. It has a setting for me to just clean my washer or if I need to just rinse it. It has a cycle just for that. Or if I need a quick wash or a just cold water wash it has those cycle. When my cycles are done it makes a cute jingle sound to let me know its done.

I purchased an HIE washer one year ago this month. I have never been happy with the cleanliness of the clothes when they came out of the wash. The only way to get them moderately clean is to wash a few items at a time and even then the whites, especially socks, seem dingy. I noticed the new Whirlpool washers now have an extra setting to add more water to the machine, so the executives have realized there is a problem with the original model.I think Whirlpool should give all customers who previously purchased the models without this feature a trade-in option to get the newer model that fills with more water or for another model with the full spindle that has worked well for so many years. I have been very unhappy with the performance of this washer and would only hope the executives would do something to resolve this problem and satisfy previous customers.

We bought a Cabrio washer less than three years ago. I have never felt that it got my clothes clean. The washer recently stopped spinning and agitating. We were told by a very experienced repair technician today that the gear case and bearings in the tub need to be replaced at a cost of $700.00. Needless to say, I am very upset. I called the Whirlpool Company and after being on hold for almost 15 minutes, I was told that my washer is too old to qualify for any help with repair cost or part replacement. My household consists of two adults. We do on average three loads a week. This is an inferior appliance and after this experience I will never purchase another Whirlpool product.

I had this dishwasher for about a year. It was a great purchase for this model and the price was reasonable. The dishwasher is very quiet and wash dishes wonderfully. The only exception is it does take a long time to wash dishes. The cycle are long.

Outstanding, however our location has a hard water rating and as such we have to use a deodorizer to balance this out. A wide range of variables which are a fit for my purposes. Interior dimensions and layout are more than perfect for my uses. This particular dishwasher is built in so blends aesthetically into the design of the kitchen seamlessly. The product has a drying system which successfully blows air over the top tray to eliminate wet areas within depressions of crockery, glass, and so forth, its excellent. There is also a light steam setting which removes tough deposits from surfaces.

Purchased a Whirlpool washer and dryer (WFW75HEFW0) in September 2017. Have had 4 service calls on washer for not completely washing clothes, leaving excess water after cycles complete, excessive wrinkling of clothes even on non wrinkle clothes, odor on some clothes due to incomplete water fill on some cycles. Factory position since there are no error codes washer is fine. Asked factory to exchange washer and upgrade model which we would pay difference. Denied. Looking for another brand and will seek legal assistance in the matter.

I shouldve read the reviews online about Whirlpool before buying our washer and dryer Duet. 4 years later the main bearing is going out and its 1200 to fix it. No support from them or anything. They did offer a loyalty discount on a new washer... No thanks. Just would be another headache a few years down the road Im sure. Goodbye Whirlpool. Never buying anything from them or their other brands. Ill definitely spread the word too.

Thank God for this website and Frank of Dover (postings on Feb. 11, 2013 and Jan. 7, 2011). We just had exactly the same horrid experience with the lid on our Whirlpool Cabrio Washer WTW7800XW. Just as with Frank, our home warranty provider first accused us of abusing the machine. I merely printed out Franks comments and description, whereupon the home warranty provider reluctantly agreed to replace the lid. We also bought an extra lid and are keeping it in our attic for the next failure. Do not purchase this washer!

We moved into our new condo a few months ago and my wife noticed that the knobs and front of our new Whirlpool Stove were getting too hot to touch so we called Whirlpool and since then never used stove. Was over one year old, we had to call their factor service representative. The charge was $98 plus labor $90 to tell us that even though the surfaces were way too hot to touch and dangerous to touch they were still within the factory specs of 167 degrees for the knobs, 152 degrees for the drawer, and 172 degrees for the front glass. He found the front of the unit reached 152 degrees which was hot enough to cause a serious burn when the stove was only set to 400 degrees. Why would a company set specs that will cause serious injuries? If my wife or grandchildren get burned by this crappy stove Whirlpool will be hearing from my lawyer. Stay away from any Aquaclean Whirlpool stove.

I bought a Whirlpool fridge in 2014 and started having problems a year later. It was making really loud noises and the fridge part wasnt working. All the food was warm. Of course there is no warranty on it after one year. I called a repairman and he said that the doors dont seal properly so the warm air is getting in causing condensation which freezes the engine/fan which is the cause of the loud noise. The reason why the upper fridge is warm is because the fan pushes the cold air up from the freezer, which of course wasnt working. Then I noticed that the frame at the bottom of the fridge is bending causing the freezer not to seal properly which would be the reason for warm air getting inside the fridge.

Refrigerator is good, keeps food at a good temperature, freezer keeps even ice cream solid. Only fault is draw in freezer does not hold as much as the old bottom freezer with separate unit for a draw. The refrigerator is nice looking and does the job. It just seems that manufacturers are always trying to make things better, but usually features were fine in older models.

Whirlpool owned or bought out Maytag. My Maytag Washer (purchased a dryer also) was a disaster from day one. The previous set I owned (Maytag) was 20 years old when I decided to replace it. From day one, the washer literally walked across the floor while turned on (Maytag Performa). I had to sit there and virtually hold it down if I wanted to get my wash done. I called and called and they would eventually come out only to tell me that this was a substandard product from Maytag and I had better buy the extended warranty. After only 7 years, the washer completely stopped working and the dryer (Maytag) is falling apart. I purchased new Samsung washer and dryer and I absolutely love them. So you whine all you want about Samsung underselling you. I contacted you several times and all I received was lip service. I will never purchase a Maytag or Whirlpool washer and dryer and I’ll let all of my friends know about your terrible customer service!

Installers left and Home Depot Cabrio washer stopped with water left in tub. I reset GFIC outlet, tried again and it stopped. Did some research and tried different outlets. Same result. I discovered that if you shut off machine as soon as the GFIC is reset, then the washer will drain no matter what. I have been on the phone with Home Depot and they have no solution but to wait one week for a repairman. Very dissatisfying service. Now I am running a 20 foot, 3 prong, heavy duty extension cord into living area where there are no GFIC outlets and it has been running. I believe there is a fault in the washer, but they must not care if we get electrocuted from the faulty grounding of their Whirlpool product.

Rust around the inside of the top of the washer. They do not use stainless for this part of the washer. It is some sort of cheap tin material that will rust in less than the first year. They have gone cheap on building but still think their products are worth the expensive price they ask. Do yourself a favor, pop the lid and look under what they do best to hide and also they removed the pop down door on the dryers so you cannot vacuum out the excess lint build up. Tragic lint gets hot and starts to burn in the gas models and stink. They should be ashamed of themselves. They have bought up most of their competition and now they have gone cheap on product production but not on price.

This Whirlpool refrigerator/freezer Model W10314956B was purchased from Lowes on June 29, 2012. Recently noticed rust appearing under ice/water dispenser tray. Requested warranty service, but was told the problem was considered DUE TO WEAR & TEAR! TOTAL COP-OUT! There are NO MOVING PARTS in this area; how can there be WEAR and TEAR? To my mind, this can only be charged as SHODDY MANUFACTURING or INADEQUATE QUALITY CONTROL by the manufacturer.This appliance is only 6 1/2 years old! Consumers expect refrigerators to last much longer than that. The only possible cause for this problem is as stated above: poor quality control by the manufacturing plant, and I completely discount being told the problem was due to WEAR and TEAR! I will think long and hard before I ever even CONSIDER purchasing another Whirlpool product, and maybe YOU SHOULD TOO!One issue that keeps gnawing at me is HOW, since this is supposed to be a STAINLESS STEEL refrigerator, can it rust? The best answer I found on Google was that its likely due to insufficient chromium in the mixture of metals used to make stainless steel. To me this continues to point to shoddy workmanship at the manufacturing plant. I have pictures of the problem, but for some reason Im unable to copy them to this complaint. Probably because Whirlpool is afraid of pictures that confirm their shoddy craftsmanship!

If you are on this website, keep reading. You will definitely find many people that have your same problem. We purchased our refrigerator 5 years ago. Since then we have had a leak inside of it which is gradually forming mold that I have to cleanup. The ice maker and water dispenser do not function for months at a time. I just purchased 2 drawers for the same reason as the review on May 5, 2016. The tabs break off of the front panels and the panel falls off of the drawers. Theres no way to pull them out. We paid over $200.00 for two drawers!I spoke with customer service at Whirlpool and read them the 2016 review. Their answer was that you should not believe everything you read. My answer was, How cant I? Its happening to the refrigerator I own. They just kept giving robotic answers. The conversation was that of someone that is in denial of having a problem. They dont care. Instead of at least offering a discount on the drawers, she offered me an over $400.00 one year warranty. Pathetic! Whirlpool has just lost another customer.

Rather than replace the heating element in my 15 year old Sears dryer, I opted to replace both my Sears washer and dryer with a new HE Whirlpool. It was the biggest mistake that Ive made. The washer does not have an agitator and the clothes turn into a twisted knot. Deodorant did not wash out of load of three sweaters. When I called tech support, the woman told me that the washer met specification. I suppose that means that it uses only limited water but has nothing to do with the cleanliness of the finished load. I was told by the repairman that future calls regarding unclean clothes would cost me despite a warranty that I purchased from Lowes.He suggested that I wash on using the Bulky Items setting and with a specific laundry soap. The setting provides more water but without the agitator, my clothing turns into a huge knot and comes out of the machine dingy despite washing loads for over 60 minutes at a time. My electric bill has gone up because I have to also add an extra rinse. The machine frequently become unbalanced. My dryers seal started loosening up two years after my purchase and finally became twisted in a sheet and ripped itself loose. Whirlpool has lost all future business with me.

Best microwave for your money. It is very quiet and easy to use. This microwave is very sharp looking and comes with all the bells and whistles that you need. I like the potato setting. You put your potatoes in and it will ask you some stuff and you press the button.

I purchased the Whirlpool Cabrio washer and dryer about 5 years ago. I wanted to pay for a good pair to last a long time for the money. We have had a repair man out twice for the washer. They ended up replacing the computer board. It worked fine for a few years. Now, it keeps getting the unbalanced error code for almost every load of clothes that we start. Sometimes, it takes 20-30 minutes of rearranging the clothes to get it to finally work. I have had to manually set it to finish the loads on a number of occasions. It is so time consuming to do laundry due to having to play with the clothes to get the loads to finish. Plus, I dont know how many times it has woken up my grandkids because of the loud thumping noise it makes when it gets unbalanced. I have never had a washer do this. I would expect when you pay big bucks for an appliance that it should last a long long time. One usually gets what they pay for. I should have bought a cheaper pair. Then, they probably would have lasted 15 to 20 years.

My husband and I purchased a Gold Series, French Door refrigerator/freezer in 2012. Everything was fine until our icemaker took a dump a few weeks ago. It had to be replaced. Taking time off from work to meet the repairman with that repair was an inconvenience but it was only magnified when we were told he would call us an hour before the repair, which never happened. We were given the usual 4 to 5 hour window in which we could expect a service call, which is the standard these days. But I had to rush home when he called because we never got that courtesy call an hour before. The repair, as frustrating as the situation was, was made and we thought that would be end of that for a while.Things were fine until today when I discovered puddles of water on our wood floor as I was leaving for work. While mopping things up with a paper towel and trying to determine what the problem was, I discovered a frozen puddle of ice on the floor of the freezer when I pulled it out. This situation, obviously, was more urgent than the last one we had a few weeks prior so we were hoping for a bit more than the Well have someone come out on the 20th response I was given. It was only after jumping through hoops like a trained monkey at the circus and raising my voice a few times out of frustration, did we get a call from the actual repairman who said he would be out within a couple of hours.By his own admission, the small rubber seal the repairman replaced somewhere in the refrigerator, was known by the manufacturer to be an inferior part. He told us they are well aware of the problems caused by this inferior seal and that they eventually need to be replaced with one that is of better quality. Apparently, its cheaper for them to use the inferior one, and they choose to disregard the inconvenience, not to mention the potential damage that could be caused to a persons home because of it.We have a great many concerns on a great many levels surrounding this product and the way we were treated as paying, extended warranty consumers. This refrigerator was a major purchase for us. We placed our confidence in a company and a product we thought we could trust; not to mention making the assumption that if we paid good money for an extended warranty, a problem like this most recent one would meet with more of an eager attempt at getting us the help we needed without having to become as insistent and frustrated as we were forced to be.How disappointing to discover that spending over $2,000 on a major purchase like this and then being told we would have to wait 3 to 5 days for a repair. Having to take time off from work, or being told to wait for up to 5 days for any sort of help to replace a small rubber seal, known to be of inferior quality, that was replaced in 10 minutes is absurd. Think twice before spending hard-earned money on this product!! The tragic lesson, however, in all of this is the verbal confirmation by the repairman that just about all manufacturers are the same when it comes to corporations trying to save $$$ and blowing off the inconvenience and expense of their customers.

I have a Whirlpool cabrio washer (Model: wtw6300 Serial Number: CT3573525) and I am very disappointed with it. The spin cycle is the worst--sounds like a jet engine and gives me the UL error message of unbalance load. The machine was purchased in 2007 but was kept indoors. At the beginning, I didnt care because I had warranty with BrandsMart. I had to call at least four times. But now, I bought the automatic control and it didnt work. For two days, I was trying to balance this machine but it is impossible since the beginning.I contacted customer service and they advised me to contact the repair service in my area to get a diagnostic analysis of the issue. Hello! I already know what the problem is after reading all these reviews! I cannot tell you how pissed off I am. I will never purchase anything Whirlpool. Two of the gas burners of my Whirlpool kitchen, after two years of use, are no longer working. I will definitely contact BBB as soon as possible. Come on, fellow complainants, let us continue to fight to get a possible recall soon! We all have the same problem because this is a manufacturing defect!

We bought this unit (Whirlpool fridge #WRF555SDF201) in November 2016. Was so excited! The fridge looks great, love the French doors, and the freezer. Its the ice maker! It spews crushed ice all over every time it is used. Its like the setting is stuck in-between crushed and cubed. Every time it is used ice goes on floor and I have to clean it up. If a small child uses it they get ice in their face and down their shirts. I have been told from Whirlpool and Lowes that it is in the design and they will not even try to fix it. They will definitely not replace it. Lowes claims they know about the way Whirlpool designs their ice makers and that they mention it to prospective buyers, but I know they did not tell me of this design flaw in the product before we bought it. I now simply have to deal with it. It is less than a year old and I burn with disappointment every time I use the ice maker. I am even more disappointed in the lack of concern for me, the customer. We bought 6 Whirlpool appliances at the same time from Lowes about 6 months ago. It will take awhile but they will NOT be replace with Whirlpool or purchased at Lowes.

This is the loudest washing machine I have ever had. Sounds like it is grinding. Called Whirlpool and said that is normal. Will never buy another one and will let everyone I know how noisy it is and not buy one.

I bought the Whirlpool model e2h50rd045v electric water heater to replace my failing gas water heater on July 21, 2014, and had it installed a couple of weeks later after a little over 3 years of use. The water heater is still working with no issues or major problems. I'm happy with the decision to purchase this water heater.

We purchased the Whirlpool double oven with convection to go into our new home 18 months ago. I used the self-cleaning cycle on the bottom oven for the first time last weekend. Halfway through the cycle the control panel went blank. Basically both ovens died, and the bottom oven door is locked. After researching online I learned that this has been an issue with the self-cleaning feature on Whirlpool ovens for some time now. So buyer beware, if you decide to purchase, dont use the self-cleaning feature.

After only 3 years using my Whirlpool front loading washing machine the inner tub is already broken. The repairman said the cost is just about the same as getting a new washer. After reading all the horrible reviews on the Whirlpool washer I WILL NOT be getting a Whirlpool. I am so disappointed in the washer and do not recommend it to anybody. Do not buy a Whirlpool appliance ever.

I purchased a new high-efficiency front load Duet HT Whirlpool washing machine (WFW9200SQ02) in January of 2008 for nearly $1000. I dealt with the mold issues and permeating smell for all these years, but the machine failed catastrophically this month - after just over 3 years - on a $1000 machine! The rear bearing went out. The parts alone are nearly $500 and the labor is estimated to take 3-4 hours by a trained technician. We are talking about an $800 repair --more than a new machine would cost. The most disconcerting part is to see how often this is happening. It is commonplace. The bearings go out on these things, sometimes after only a year or two, sometimes after 3 or 4; but it is very rare to have any machine go longer than 6-7 years. Whirlpool wont do anything. The best chance is forcing a recall related to the class action lawsuits pending about the mold issues, but by that time, how many people will still have their machines?

We purchased a Cabrio washer in August 2013, in early August 2014 we noticed that it was not getting all of the detergent out of the clothes (noticed it on the dark clothes after drying). We use less than the recommended amount of HE detergent and dilute it in the dispenser, also always use the extra rinse. We just had a Sears service man out at a $100 cost only to find out that he gets these calls all of the time and the machine is operating at the factory settings.After reporting the problem to Whirlpool all I got was we are sorry and a link to how to operate the washer. In the demonstration video it clearly shows that the water level never covers the clothes. I know Im old school but in my opinion the water should cover the clothes so it can properly wet and agitate the items in the washer. To say I am less than satisfied is a gross understatement. Im out the cost of the washer plus an additional $100 and after a year of ownership and contacting Whirlpool less than a week after the factory warranty ran out all I get is an Im sorry you do not know how to operate a washer.

Purchased this washer 7 months ago. We are a family of 5 with A LOT OF LAUNDRY!!! I adequately researched a machine that could do large loads of laundry, WELL. I read at least 100 reviews and went forth. (Note to self that anyone giving this machine a decent rating, is a DIRTY, SMELLY, FILTHY LINEN WEARING FOOL who doesnt take much pride in their clothing cleanliness.) I proceeded onward and after paying A LOT OF MONEY for this 4.8 Whirlpool Cabrio Washer, I found out within the first two days of owning it, that IT IS GARBAGE! Regardless of the 4.8 drum size, you can only fill it less than 1/4 of the way with clothes, to even hope they will be touched by water. My clothes come out DETERGENT STAINED & DRY! Insanity... A washer that doesnt wet the clothes!!! We have had 4 repairmen come out within this time, because I am fed up! I have been physically shown and told now, by all 4 guys, that the washer will not fill more than 9 inches with water. They advised me to fill Home Depot buckets and throw them into the drum. THIS IS WHAT I DO, TO SATISFY THAT I AM WETTING MY LAUNDRY - PURE CRAZINESS! The repairmen told me to set all loads to bulky sheets + extra rinse + highest soil. This is a 1 hour, 26 minute initial setting. Note that my adding water messes up the computer readings and it will reset throughout the washing cycle multiple times. Even with all of this... the machine still doesnt wet the clothes!! The top and center of the load is BONE DRY! This machine will not wash sheets, blankets or comforters, either. Dont waste your time trying!!! Dont be fooled by the drum size. Your great grandmothers 1930s 1.6 cu ft washer washed more clothes in any given load. #1 My water bill is through the roof. #2 The washer constantly resets and runs on any single load for over 2.5 hours AND #3 MY LAUNDRY PILES HIGHER AND HIGHER, as you cannot put more than a smattering of clothes in the machine, at any given time! GARBAGE, GARBAGE and MORE GARBAGE!!! I would be better served to find a stream and a flat rock and start doing my laundry colonial day style! I am done... Finally had enough of this insanity! RETURNED THE MACHINE THIS MORNING!!!

I HATE this washer!!! Did I say hate this washer? YES. Do not buy it. Delicate cycle. Ha ha ha. NO!!! Good thing Im retired because I need to check it every 5 min to see if its getting clothes wet or untangle a mess. I find I use the rinse and spin cycle once with a little soap and run it again to rinse. A lot of extra work. Sheets washed in the deep water cycle turn into a giant twisted mess if you dont stop machine and untangle everything. Hate it. Hate it. Do not buy this machine. I use more water by washing things twice or fewer items. What a waste of time!!! Locking lids are the worst thing ever designed. Why?? Dont tell me some stupid kid is going to climb in it. We should have a choice or be able to disable it!!! Worst machine ever designed???

I purchased the Cabrio washer/dryer in 2006. We have had it repaired 6 times and I even purchased a two year extended warranty after having issues with it the first year. Now I seem to be in the same boat. The washer will not spin and drain. This has already been looked at by a technician several months ago. I feel like this product is faulty and has not worked properly from the start. Are there lemon laws for appliances? It seems that this product would qualify. I will never purchase Whirlpool again.

I bought a top of the line Whirlpool dryer that cost me over $1,000. Havent had it for a month and it requires a service call. Have to wait two weeks for service! Totally unacceptable. The dryer is JUNK and now I am stuck with it. Horrible company. Bought from Home Depot.

Our water heater pilot light has started to randomly shut off leaving us with cold water to shower in on numerous occasions. We hired a local appliance company that we are familiar with to come out and look at it. The tech thought that replacing a part would fix it. It didnt (which I will take up with them). After doing what Whirlpool asked us to do it still is not working. I called them back to warranty the tank and the rep keeps repeating it is a limited warranty so basically I have to pay the service call and labor charges to look at, repair or replace which is going to cost nearly as much as it will to just buy a new one.

I purchased the Whirlpool washer and dryer three years ago and I absolutely wish that I hadnt. After three years of use, the bearings on the tub are shot. I need to replace them but it will cost $400.00 to repair. This is the second time that this machine is for repair. I am going to dispose this machine and purchase a new model other than Whirlpool. The overall performance is poor and not as advertised. It does not use enough water and does not wash clothes well enough. At times, you can see that the water never reached parts of the garments. I am totally disappointed in its value and quality.

We bought a new Whirlpool Cabrio washer and dryer in January of 2012. We were setting ourselves up for retirement in a couple of years. Worst mistake ever! It cant get clothes clean especially dark colors. I wash my blacks at least twice, sometimes as often as 4 times just to get the detergent streaks out- simply rinsing a second time doesnt do the job. I guess I should be grateful that we have not needed to call a repairman. This is so disappointing as our last Whirlpool washer and dryer were over 25 years old???

My landlord purchased a new Amana washer (NTW4605EW0) Labor Day weekend 2015. It started having issues in the spring, so we went through the process of utilizing the manufacturers warranty. Apparently, Amana, part of Whirlpool, requires 5 attempts at repairing the machines before replacing. Okay, so starting in June 2016, we arranged service appointments 5 times and replaced 1 part, then another, 4 times. Clearly, that part is defunct. Right? Fast forward to September and then into October. Get a new washer, and not the one I preferred. We got the Whirlpool WTW4816FW1. Before the installers leave, we are having the SAME issue. Stops midcycle, doesnt finish cycle, sometimes stops while filling, or while full, or kid wash, or mid drain... But now with the new washer, the drain and spin cycle thinks it should FILL instead of drain... and Whirlpool said they would get someone out the next day, a promise they cannot keep because they dont supply the repair guy, they source with local companies. So, the company ordered 3 parts... That could be the problem. And 4 days later, 2 parts are on freaking BACK ORDER. Parts arrive. All new parts replaced. Machine still doesnt work. Outlet tested by us and them and it is fine. The techs think there is some kind of RF interference. Turn off sensor light, which is on the same wall, unplug power to wifi router (which outdates the washer). Still, doesnt work.I have spent half my week, every week, since June, restarting my washer, unplugging the damn thing, waiting, and waiting, trying again and again and again to wash 2 loads of laundry a week... Literally takes a week until the damn thing does its job. Whirlpool is sent us a replacement washer. Can you guess what happened the first time we started it? SAME ISSUE. Cycle will not complete. Sometimes it dies before it even fills. Sometimes it dies while filling. Sometimes, it will fill and fill and drain and fill and fill and drain and... never stop filling. Or, the fun one, the drain and spin cycle thinks it is suppose to fill. Continuously. And then, suddenly, after unplugging it for 1 hr, or 24, or 72 hrs, it will work fine for 1-7 cycles. Nothing is consistent except that it doesnt work consistently. HAS ANYONE HAD THIS MUCH TROUBLE???

My microwave is very reliable and has lasted a very long time. I have never had a problem other than the circular glass plate that broke. It took me a little time to get use to the timer on it which is a little different than other microwaves that I have used. Overall a good buy.

I bought my house brand new with all new Whirlpool Gold Series appliances. About a year and a half from purchase date, I started having issues with my fridge, then my dryer, then my washer, then my fridge again and that lasted about 5 months, then my microwave and my dishwasher. My microwave stopped working in January. It’s now April and I still do not have a new one. It keeps getting lost or shipped to the wrong address or something. Every time I call, the representatives don’t know how to look it up. I wind up on hold for at least 30 minutes, and I get transferred to at least 3 different people. I hope my last appliance doesnt break because I’m over Whirlpool, and I will never buy another appliance from them again.

I purchased this heater in 2009. I have had so much problems with the pilot staying lit or the thermocouple. Had to have that changed, have to clean under heater monthly. I have called Whirlpool numerous times because the pilot light goes out. Now I have a problem with it staying lit. Whirlpool tells me I have to pay for service labor. They sent out a technician who broke the igniter and I am being told I have to pay labor cost to have this fixed. THEIR TECHNICIAN BROKE THE IGNITER BUT THEY WANT ME TO PAY THE LABOR COST TO FIX WHAT HE BROKE. I have had it with Whirlpool. This heater is a piece of garbage as far as I am concerned. I am tired of having no hot water.

We bought a fridge in November 2013. Brand new, paid about $2400. After a few months, the fridge wasnt keeping our food cold, was leaking from the ice maker, and wasnt making ice. I called for a repair and about a week later they sent someone out. He assessed it, then came back a week after that to replace the part. Within a month or two later, the same problem. I called for service and was set up with a new company. The repairman called me a couple days later and instead of setting up a time to come in, he says its a common problem, he knows whats wrong, and he will order the part and call me next week to come replace it. A week passed, no word. I tried calling the man back, left several voicemails, and no answer. After another week, I call whirlpool again and tell them I heard nothing from the man and at first they tell me they cant do anything with it since it is an open ticket and I tell them thats not okay. They need to close it, he never even came to the house and assign it to someone else. After they tried multiple times to call the repair company themselves with no answer, they assigned it to a new repair company. Again, it was assessed, a part was ordered and replaced another week later. So now its been well into 9 months of having a worthless fridge. A few weeks after that part was replaced, the problem was back and I called again for repair. I was told if this problem is not solved this time I would be eligible for a replacement fridge. Obviously, it did not work so I called to have a replacement fridge at the end of August. I was told that someone would call me to set it up in 5-7 business days but maybe a little longer since Labor day was right around the corner. I waited, patiently. I called every few days for weeks until mid October and kept getting told it had not been assigned, they are really backed up, it will be just a little bit longer and they will send a message. Mid October, my sister in law called for me and she was told that it was denied because I had not had it serviced within the last 4 weeks. WHAT KIND OF ANSWER IS THAT??? Thats like putting salt on a wound!! I have had spoiled food, constant clean up of leaks, and constant wasted calls to get told that it was denied because it wasnt serviced in the last 30 days while I was waiting for a response from Whirlpool??? So of course I grab the phone and go off. They agree to reopen the case because it was denied for a bad reason. At this point, as I type this, I have been on hold for 55 minutes to speak to yet another supervisor because it has been 2 and a half weeks since they reopened my case and I am told it has not been assigned and the best they can do is send another message.

I have a Cabrio washing machine that is just barely two years old. I have already spent over $500 on repairs/service calls. The first repair was the drum which cost $300 + to repair. Typically, my experience with washing machines is I buy a new one after years of service simply because I want a more updated model. I just bought a different brand to replace the Cabrio as it has another broken hinge (one rusted out. How bizarre is that?) And it wont work on some of the choices for cycles. The first time I called whirlpool, they were totally unresponsive and told me there was not any problems with the machine even though the part I needed was on backorder for three weeks. I have never been so frustrated with a product I thought was a reliable brand, not!

I bought a Whirlpool washer in Aug. 2015. At the end of September I had to call and get a repair man to come out twice because my clothes got stuck way down under the agitator. Not only that, but it does not clean my clothes well at all. I am really dissatisfied with this washer!!

I have a Cabrio washing machine and the circuit board has gone bad. I understand from Whirlpools customer service that if your machine was made before 2005, they are fixing the issue. Mine was made after 2006. Even though the problem is the same, Whirlpool will not correct the problem. I was told it was fixed in the new machines. The circuit board goes bad and you have to start and stop the machine at least three times before it will start your cycle, then it stops again at the 17 minute mark and you have to cancel and start the machine again for it to finish its cycle. The error is F1. Customer service acknowledged that this is a known problem for the Whirlpool machines built before 2005 but deny any claim that is is happening to the machines after 2005. Looking at all the other complaints, it is still a problem. I am disappointed in Whirlpool for their customer service attitude and for them not standing behind their product and fixing a known problem. I have always bought Whirlpool products but going forward will be switching to a better company. Shame on you Whirlpool. For a machine I spent $1000 on, the part is going to cost $300 to fix.

I bought my fridge in late 2008 and I am already experiencing potentially expensive repairs due to what I believe is a defective design system, of which, consumers are having to bare the consequences for those who collected our hard-earned cash and delivered a lousy product! I saw so many similar complaints about the ice system on this fridge that I am almost positive that it qualifies for a class action suit and settlement. How about a collaborative approach to this since we have all suffered needlessly? Tell me what you think and if you are in on it.

Whirlpool Cabrio Washer and Dryer - The washer does not stay balanced even with a very small load (even though advertised can wash King size comforter). Even with a light load, we have to put the dryer on Heavy Duty or Bulky...and usually have to dry a second time. When attempted to contact Whirlpool, no help available. WORST PRODUCT I HAVE EVER PURCHASED... Would not even want to GIVE this set to a friend or family member. DO NOT PURCHASE THIS PRODUCT.

I have been a dedicated Whirlpool customer for 50 years. I purchased my new, Cabrio washer and dryer in 2011. The dryer works fine. The washer does not. It ties everything in knots. Most everything comes out in one large, wrinkled lump. When washing sheets, it wraps the whole load in a soaking wet, fitted sheet bubble. You cannot wash one item by itself, because it will become unbalanced and shutdown. I will say that I havent had any repairs yet, but I have a feeling, its only a matter of time. I have decided to buy a new washer, but it will not be a Whirlpool.

We purchased this Kitchen Aid stove December 7, 2016. I dont use the oven much, but have found that when it gets a little dirty and I use the Aqua Life function, it does not clean. Have tried by setting a pan of water in the bottom and raising the temperature to 300 degrees, but nothing cleans. We went with this feature to be more environmentally responsible. Leons, where we purchased the stove, claims that they have heard nothing of this issue and have not been informed of this by their head office.

I stumbled across this site while browsing the Net, looking for a way to deal with the same situation I now know you all have been struggling with: Whirlpool Washing Machine! I wonder: Is NASA still accepting volunteers for their living on Mars experiment? Id rather beat my clothes on a rock than touch that POS Whirlpool that has me back on tranquilizers! Mine was purchased about 2 years ago when I was in bad health and my son was handling my affairs. I could tell - just by listening - there was something very wrong with it, from the first load my son attempted to wash. It would start and stop, restart, restop, ad infinitum and made a terrible racket. I told him nobody would intentionally make a machine like that--something had to be wrong with it but he assured me that he had checked both with the store that sold it and he also read the manual. He had a hard time accepting but we thought maybe this was because it was new and would settle down after some use; after all, the store (Best Buy) assured him the sound was normal for this particular machine. However, the weird sounds did NOT lessen nor stop, nor did the starts and stops. Little did we know, this was just the tip of the iceberg! We have encountered/suffered through every nasty performance detailed here: low water, wont spin, leaves clothes soaking wet, wont spin out excess water, lid locks (grrrrrr), it cant seem to switch from one procedure to the next; there is nothing washing the dirt out of the clothes--they just sit in the water and soak(?), then the water is released. Clothes come out with stains still on, so wet that the water must be wrung out of them! Very hard for me with arthritis all through my body! Ive tried countless times to reset machine to Drain & Spin. Ive even waited (yawn) for it to unlock so I can open and then readjust the heavy/wet laundry, trying to make it even all the way around so to avoid an unbalance. But nothing helps. It will start to spin. And then it stops. (wait, wait) Starts to spin again. Stops. (wait, wait) Starts again, does it a bit longer. (start to relax) Stops. Ive spent HOURS engaged in that kind of mindless, maddening frustration, just trying to wash one small-medium load. (I wash only for one person--myself, now.) My son, who got married and no longer lives with me, said the only way he could manage to struggle through it - and agrees it DOES take an inordinate amount of time--for just ONE load, he has to put the settings so that it washes in Deep Water even if small load. He sets Rinse, to 2 Rinses. He sets it to Soak even if the soil is light. Even then, it still makes noises, starts and stops, has to be adjusted several times during Drain & Spin. Last but not least, the noxious odor: OMG! I left one batch of laundry in the machine, with the lid open, as it was very late so figured Id dry them next morning. Some hours later when I went back to shake them out and put in clothes dryer, they smelled so awful, I had to wash them all over again! In fact, Ive had to follow my sons admonition to leave the lid up AT ALL TIMES unless actually washing in order to keep down the stink. I washed my last load with Baking Soda added to wash cycle in an attempt to lessen the odor and get laundry cleaner. Someone here wrote - in their review - that there should be a Class Action (Law) Suit filed against Whirlpool. I AGREE!!! And I want to opt IN on it. There are several law firms that advertise on t.v. that specialize in Class Actions. It would take some time and paperwork but will not cost us anything unless we win the case. Then the law firm gets a percentage. I am willing to work with one more others here who truly want to settle out this problem. I cant believe 2,000 (and thats only here), people are willing to eat hundreds, thousands of dollars of worthless, mind-gripping, rubble such as we have spent our hard-earned money. Other manufacturers recall their defective merchandise and/or replace it, or make arrangements with the retail stores who carry it to make amends, free repairs, whatever it takes to make dissatisfied, disenfranchised customers, whole. We paid for these demons from hell and we deserve to get an equivalent in merchandise (that works properly) or services. That is how it is done here in the U.S. For the life of me, I just cant comprehend why Whirlpool has been allowed to continue selling this junk--why no entity or person or lawsuit has stopped them! As I said, I am willing to work with a core group who is serious about filing a Class Action (Law) Suit against Whirlpool. It may be that the retail stores would be included as well; however, that is a matter best left to the discretion of whichever law firm we select to represent us. For those of you here who do NOT wish to be included, do not worry; you are not being pushed into anything. The way Class Actions work, you have the choice to opt IN (be included to receive your pro-rata share of what is collected). Or you are completely free to opt OUT. By opting out, that means you do not wish to be part of the Class Action and therefore, you will not be included nor will you receive any portion of the recompense collected via the Class Action. Just for your information, though: You are allowed, by law, to bring your OWN lawsuit against all or some of the same parties. The most common reason for opting out, is if you have suffered an extra large financial loss and prefer to file your own suit in order to collect ALL recompense; whereas, sometimes - in a Class Action - the individual plaintiffs may not recoup the total amount they feel they have lost. If you DO decide to opt out and go on your own, realize you will be fully responsible for lawyer fees (although you CAN add them into the balance you are seeking in your suit. Settlement of your claim may or may not include lawyers fees.) Good Luck to all. To those who wish to file a Class Action with some of the rest of us, please contact me if you want me as part of the core group of plaintiffs.

We been having the same issues as all of the people that have consumed the water heater. We have replaced the pilot more than 3 times and other parts of this water heater! Well, we are a family of 9 and the only way we can shower is by heating up water like everyone that has the same issue.So I would never recommend this (Whirlpool) water heater to anyone!

The Weatherization program installed a whirlpool refrigerator in our home in October 2012. The fridge is less than 2 years old and the blower fan went out. We lost most of our food (what wouldnt keep in a cooler) and my daughters insulin spoiled. When they put this fridge in, they took our old one saying it was less efficient. Now we are stuck with a fridge that doesnt work and is out of warranty at less than 2 years old. We have left several messages for a Whirlpool representative to call us back and here we are, one week later, and no call back.This is frustrating because although the fridge we had may not have been as energy efficient, I am almost certain that it would still be working. I have never heard of a fridge that lasts less than 2 years. Also, we know that the blower fan must be a common problem because they are back-ordered approx. one month. We checked online, and called local businesses and not one place has the part available.I think we at least deserve a call back considering how stressful this has been on us. I had just spent all of my grocery money for the month, and 70% of it went bad and had to be thrown away. Money is tight for us and replacing spoiled food is not an option. Also, the insurance company denied our request to refill my daughters insulin a little early. Without proper refrigeration the insulin goes bad. The insurance doesnt replace lost or spoiled medication. Guess we get to pay for that too! Thanks so much Whirlpool! Ill be sure and highly recommend your products to my friends. (NOT GONNA HAPPEN.)

After years, the gas hot water heater model fg1f5040t3nov went out. The plumber had me get a new part. 2-3 weeks ago, it went out again. I am trying another new igniter assembly. If it goes again, Im getting a new heater - not a Whirlpool! My plumber says he can get me a new one for a little more than I spent on the Whirlpool, and its much more dependable.

As long as Whirlpool continues to use JB Hunt for delivery and installation service of their products, I would stay away from ordering. JB Hunt visited my home 3 times, and each time left with the dishwasher as they arrived without the appropriate tools to perform a basic installation. Whirlpool also sent 2 damaged dishwashers that could not be installed. Buyer beware.

On April 17th mid morning I noticed that the freezer side was not keeping items Frozen. Everything was melting period. I then opened up the refrigerator side all the items are not as cool as they should be. I then proceeded to do a Google search to see what I should check for in regards to the freezer and the refrigerator side not keeping cool. I then proceeded to pull the refrigerator out to inspect the back of the refrigerator. When I did that I noticed there was a hot mark on my wall, as well as a huge it burn mark on my floor. I then unplug to the refrigerator do the huge fire hazard and I touched my floor and it was very hot to the touch.I called my stepfather who is a firefighter and had him come over right away. He said we needed to take the refrigerator outside right away because the compressor had overheated and that is why it started to burn my floor. He then went to the fire station and got a heat sensor check machine, and we checked my wall and floor and we had to make sure that it was cooling down so it did not start my floor boards on fire so then we had to put a fan on it to cool it down. I then went and purchased a new refrigerator, due to this one was no longer able to be used or repaired. The refrigerator was only four years and 5 months old. For a $1,300 refrigerator it should last longer than 4 years.I called Whirlpool the following day or two days later and regards to this issue. The only thing they could tell me is that they were sorry, this refrigerator almost started my home on fire and we have six children a family of 8. It ruined my floor and part of my wall in my kitchen and we have lost a few hundred dollars and groceries. This is ridiculous and not the first time, I read a few others having this issue, Whirlpool said they have never received any complaints in regards to the refrigerator burning the floor and does not see it as a fire hazard at all.

Whirlpool WRF992FIFM00 - Purchased new April 2017. Its October now. Service has been called 7 times so far. Ice maker has not worked since day 1. Fridge leaked all over the interior around the third month. Compressor went out in 5th month. Compressor replaced 2x so far. Every component piece was replaced on 5th month. Still no ice. As I write this compressor getting ready to go out yet again. Paid almost $3000 for this piece of crap. On first name basis with technician. He tells me that his guys work on this particular refrigerator CONSTANTLY. So far I have lost over $1700 in food and wages (leaving work to meet technician). Currently battling Whirlpool. My next step will be legal action if they do not refund or replace this stainless piece of garbage.

We recently bought a home and our dishwasher came with the home. We saw our basement leaking and got 2 plumbers come over and check the pipes out, paying almost $600, only to realize that the leak was actually from the broken plastic in our dishwasher, and not any pipe. When we called the Customer Service to get it replaced as it comes with a 20 year warranty on the plastic body, they said they would replace the part, but I would have to pay $81 for the first 15 min & $19 every additional 15 min. for labor, which means I would end up paying at least close to $400 or more, depending on how long the technician takes to replace the fiber body. Neither their policy nor warranty make any sense to me. Its frustrating to see that in spite of being covered, I would be the one paying money out of my pocket.

WRF989SDAB00 - Our house burnt down in April 2012. We purchased all Whirlpool products to be put back into our house. We had to purchase these items in November 2012 so the contractor could get them into our house because of the cabinets. We did not move into our house until the last week of December and could not use these items until then. In December of 2013, our freezer went out along with the ice maker. I had to fight for Whirlpool to pay for these repairs. They kept saying that it was over the one year warranty. They did accept responsibility and paid for A&E to come look at the frig. One guy came out the first time and thought he fixed it. No. A month later two guys came out. They said it was the condenser. They ordered the parts and came back a third time to replace it. A month and a half later, same problem. A&E came out a fourth time and thought they fixed it again. Nope. During this period, I purchased a extended service plan. I AM TELLING EVERYONE TO DO THIS NOW BECAUSE IT TAKES 60 DAYS FOR THIS PLAN TO TAKE EFFECT. Now the service plan people sent a different company out and he said it is going to cost a lot of money because the things that need to be replaced. The plan SHOULD cover all of this. I called both the service company and Whirlpool demanding that they send us a replacement frig. I believe sending someone out at least SIX TIMES to fix the same problem is ridiculous. Each company is blaming the other and each is saying its the others responsibility to replace the frig.

I am in construction and have had to deal with failed motherboards on new Whirlpool fridges that we put in some rental properties. Knowing that, when I went to buy a fridge for my own house, I went to a very reputable appliance company and talked openly about getting a fridge that wasnt going to be a problem. My sales agent and I go back always and he was very open about the problems with the more gadgeted Whirlpools so we picked a low bells and whistles French door fridge to avoid that. It stopped cooling at about the same age as all the rental units did and had a control panel fail. The sales guy and I laughed about how even knowing about the issues I didnt avoid it. Their company came out and fixed it for just short of 300 bucks.Two months later, it stopped cooling again. The service tech came out and this time hit the side of the fridge with his hand and opened a relay getting it to work, at least for another week. The tech told his boss that I must not have shut the freezer causing it to go into defrost mode. The third time it failed, we were out of town and lost all our perishables. We had the same tech come out and replace the board he got to work the last time with a whack to the side of the unit. That board should have been under a parts warranty for 90 days but I may have missed that with the slap repair working for the additional 2 weeks.Im trying to put this behind me but Whirlpool sent me an Extended Warranty Plan opportunity. I can now buy a plan on an almost 3-year old fridge. I am wondering if they are trying to give me the hook up on a bad product or just hoping to prey off my fears and cash in. The company I bought the appliance from has been first rate but their hands are tied by Whirlpool who has virtually no support for their vendors. Before buying a Whirlpool, consider a Sub-Zero. After you figure in the repairs, they arent too far apart in price.