We acquired the Cabrio Six Sense washing machine through the purchase of our new home, and quickly realized why it was left behind. This thing is pretty and has lots of bells and whistles, but that is where it ends. I am very surprised to find out that Whirlpool put such a piece of junk out for purchase. I have owned Whirlpool products in the past and had great performance and quality. We will be pulling this hunk of junk from our laundry room and installing the GE washer that we already owned immediately. Anyone want a free washer?

We purchased the Cabrio washer & dryer with 6th Sense technology in 6/2007. What a mistake it has been. We have had 3 F1 error codes that a repairman has had to come fix all about a year and half apart. It makes crazy loud sounds if it decides to actually spin in the final spin cycle. It normally does not spin. It just always flashes UL for unbalanced load. We are extremely dissatisfied with this set. The dryer heating element has gone out also. We just purchased a new part. Prior to this, we had a hand me down washer & dryer that worked excellent. We regret getting rid of them, and now need to purchase a new washer & dryer. Whirlpool ought to stand behind its products and get this fixed.

On 12/31/2009, I purchased a Whirlpool Cabrio, model# WTW6800WW1. I was excited as we have never spent that kind of money on a washer. We felt as though we had purchased a higher end washer and would have it for years to come. Wrong! About one year in to its use, I began to think it was getting louder during the spin cycles. I thought I was just being critical and it was just my sensitive ears. Now just past the two-year mark, I know it was not me. It’s the POS washer. It is so incredibly loud, not that you cannot be in the same room as it is during the washing time especially the spin cycle. In its defense, my clothes got cleaned.However, I know that the bearing is eventually going to give out and I will have a mandatory repair on my hands or have to pay someone to fix it. Either way, it’s a lot of time and a lot of money to fix a two-year old washer that should not need to be fixed. I attempted at getting Whirlpool to stand behind their product. No chance, no way. Good luck with that. Their washers last about 2-3 years. I will never purchase another Whirlpool product. This is a horrible product which is matched by their horrible customer service.

This is about my Whirlpool Cabrio top load washer machine (model number WTW6200SWD, serial # CT3670597). I bought this machine in 2007, and soon after, I was having problems with the F1 code. After several trips back and forth to reset the code, so I can get the laundry done, and many frustrations, it was time to call Whirlpool to resolve the problem. I find out that there was a recall for this ongoing issue. They sent a technician to replace the mother board, and everything was fine for some time. Soon after, the machine was giving us more problems with the F1 code, and the UL code. It doesnt matter which way I try to balance the load. This piece of junk will not work. Whirlpool needs to stand behind this issue, and recall this washing machine for good. Every customer should be entitled to a full refund, and a compensation for the many hours of electricity, aggravation, and frustration, wasted trying to get this junk to work.

We purchased the Whirlpool refrigerator (model ED5LVAXVQ00) 4 years ago. The plastic around the top shelf cracked within two years but is not a warranty item. Now, all the plastic surrounding shelves have cracks and the slides for the pull out drawers are also broken. My wife and I are retired and have not overstressed the shelves. The cost for replacing the cracked plastic will be approximately $250 (hardly worth fixing)! We are very disappointed that a once reputable company would build and market such an inferior product. I hope this comment will warn prospective buyers to be careful when considering Whirlpool refrigerators. Very disappointed!

Cabrio poor design - My number one issue with Cabrio is that it is destroying blue jeans. About 7-8 pairs now. It simply rips a hole in the leg. Also, sometimes clothes arent wet, usually not clean.

Purchased Whirlpool Duet wfw9550ww00 in 2012 from PC Rich, who purchased machines in 5/11. Product stopped being made 5 yrs prior. Of course I did not know until my washer went and had service come to my house. He explained prior information, looked at my machine for 2 seconds and said someone put in a heavy load that machine was not able to handle and 2 belts broke and guts of machine are destroyed. Its a $799 fix, not including labor, youre better off buying a new machine. How does he know thats the reason for breaking??? The machine is 2 years old, not a scratch on it!!! Unbelievable!!!! Then states thats $114 for the service call. $114 for 2 seconds!!! Im absolutely furious!!! Whirlpool has a new program (if it helps anyone), if your machine is fairly new they will give you a invoice for 1/2 off a new Whirlpool... Take it from there. There should be a tremendous action lawsuit, look at all these complaints...

This Whirlpool, two door, refrigerator with ice maker & water, replaced a very poor quality 'LG' refrigerator which had stopped working. The company, "LG" was not interested in learning what the problem was but was only interested in making sure we understood the fee for an "LG" repair person to come out. The set fee was a minimal of $150.00 without any repairs. We decided to toss the LG and went to our local Home Depot and purchased our Whirlpool that same day, on sale! Our Whirlpool has been working great, without any problems and the fresh, filtered water is always refreshingly cool. We would very highly recommend Whirlpool! It seems their products always work very well!

Pathetic pathetic service!!! Unsatisfactory service!!! First of all, I would like to tell everyone who ever reads this, that please please please never ever use any Whirlpool products, as their service sucks, their response sucks too, and zero co-operation from their people, which will make you regret to have used their products in future. Please note I registered a complaint on the whirlpool no. **.The complaint was that the washing machine used by us had issues, the power button/ on & off button had come out, and this was clearly stated while registering the complaint. I get a call from Mr. ** (Representative of shree enterprises bibwewadi, pune) and the power button issue was well informed to him as well over the phone by me. He arrived to our place without any new material, he sees the machine and interchanges the buttons, i.e. the broken power button is replaced by other button from my machine which was less used compared to the power button. I had to pay a sum of rs. 400/- for the pathetic service I received from your end.I expect a response from your side within next 4 hours, or I might have to escalate this issue!!! (Please note Whirlpool team that I had submitted the same on your website yesterday, yet I have not received any response from your side). (Whirlpool rating- 0 out of 100). Thanks. (And whoever reads this, please tell me where else can I post this review of mine so that I shall alert everyone that how bad whirlpool service is)...

Its big enough, but the ice maker is always messing up, the shelves broke easily, the water takes forever to get cold from the indoor dispenser. The finish, which is called Satina or something like that, dents real easy. It is really a piece of **! When it was new, we had the repair man out 4 times before it was fixed. He even said it was a piece of junk and it should be lemon lawed out. Drawers broke, shelves broke, and parts are really expensive when you break one of the plastic parts.

We purchased a Whirlpool washer model WTW7500 in November of 2017. I found the clothes were not getting clean and also noticed that even after a full wash some parts of the clothing or sheets had dry spots! I checked all connections and called for service. As soon as the serviceman saw the machine he said, “yes, that’s a problem with those machines”. They are low water/water saving as per some American regulation and that’s what happens... you’re going to have to live with it. He also suggested running an extra rinse and using “deep water” function. I did this and it made very little difference except now a wash cycle for bedding is 104 minutes! Also, still had a big dry spot on my sheets!When I called again to Whirlpool they scheduled another repairman for a second opinion, turned out to be the same person with the same answers... I called Whirlpool again and was informed that my washing machine is working as designed! I argued that a washing machine is designed to wash and clean clothes so this one does not do what it is designed for... I spoke to the supervisor, she was actually just rude, also said I not had 30 days to make a complaint and I was outside of that, when I asked to speak to her supervisor she said there was no one above her although she denied being the owner of Whirlpool! (That’s my little joke). Anyway wish someone had warned me prior to this purchase.

Cabrio top load HE washer - Ive only had the washer a couple of years. My husband bought it for me thinking it would make washing more time efficient and energy saving. Lesson learned! After struggling with this washer for the past year, I was told today that to repair it, it would cost around $800 or I would need to buy another washer. The washers bearings and tub need to be replaced and it will not spin properly or at all. Previously, I have owned washers for over 10 years each. This was definitely not a good purchase. After reading all of the other complaints on this site, I understand that I am not alone. It was also mentioned on one complaint of the possibility of a fire hazard with this washer. Whirlpool should be recalling.

I purchased this range 7 2013. I was a snowbird at the time so after November I went south. Upon returning my top oven when lit had a gas smell. It took three weeks to get someone out and was told it was the igniter and would cost 350.00 to fix. I then called dte gas for them come out as I have full house warranty. Since then five calls a new igniter and a new board just put in two weeks ago the board doesnt work. This unit has been discontinued. I would like to know why. And if there is a class action suit against. Whirlpool. Co.

Hi Folks, so today I had the pleasure to speak to Whirlpool regarding a repair bill on our washing machine which now has a bearing failure and estimate to repair was 1279.00. Its 6.5 Yrs old, just out of extended warranty and cost me with the pedestal a total of 1250.00 when new. I explained that in the 6.5 since I have lived at this house where we spend all new Whirlpool Gold Appliances, half have now failed. Range Microwave, Dishwasher and now the 1250.00 front loader is dying a slow and agonizing death with a bearing failure. Just so everyone understands, the estimate is from an official Whirlpool repair service that was booked through the Whirlpool website. Other repair folks just would not bother to look at it when I told them I believe the bearing was going bad.The repair man that arrived was professional and on time. However, I had a hard time understanding how a 6.5 Yr old washing machine would be considered beyond economical repair by costing 1279.00 to repair. Labor was 250.00 which I thought was fair. Time, etc. But parts made up the difference in cost. So later in the day, I spoke to Whirlpool and they offered the equal new washer for what would seem an excellent price. About half off. Wow, I thought that sounded good. So I asked if my existing pedestal would work with the new washer and it did not and I would have to pay for one. Regardless if my old one was fine or not.So, they offered a discounted rate from new at another half off. Total approx 800.00. So, I asked the Whirlpool rep to hold on and I need to check with my wife if she wants the replacement. She uses it as much as I do and wanted her thoughts. She checked the model on the washer and pedestal and with the local Home improvement store, they have it on sale for both units (washer and pedestal) and its about 50.00 less?Consequently, I called Whirlpool back and explained that it does not move the needle to regain my trust as compensation on a 6 yr bearing failure, failed dishwasher and range microwave they offer what a distributor of their product can offer for less as a package? Really? I mean, the Home improvement store is not in the business to lose money. Now, I am having a hard time understanding my own failure to have trust in a brand I used to have with my previous house.My mom had an old Whirlpool washing machine that lasted 25 years before she and my dad gave it away. You know, the old white top loader they used to make back in the 70s. Sheet metal, made a racket and never broke? Oh yeah got the clothes clean too! I dont know what to make of it anymore. So, I will just wait till it dies and take my hard earned money and spend it on another brand in my next house which we are going to move to soon. Maybe I can feel nostalgic and find my moms old washer. Its probably washing someones rags right now and getting them clean. It must be 35 yrs old by now.I dont expect to get anything for free. Its out of warranty, so I need to deal with the consequences, but there are steps the other party can take to help remedy the situation. I think they tried and it was genuine but in my thoughts its just not enough when your local box store is offering the same. When you develop a brand to extend a message of trust in quality and value, you need to have quality and value all the time. I suggested they help with the costs on the parts. I would certainly pay for the labor. Parts cost little to the manufacturer. Unable to help that way. I thought it was cheaper for them too. Guess not. Its come to be a throw away washing machine at 6.5 yrs and I am Infinitely disappointed. I just want my washing machine to work as well as my mothers old one and have the possibility to fix once in a while when needed.

I purchased a Whirlpool Duet washer and dryer set in 2008. The washer control panel lasted 3 years. Because I did not have an extended warranty, Whirlpool would not do anything to accommodate me, despite the exorbitant cost of this machine. I told them that I would never buy another Whirlpool product. It is now 2017, and I have not purchased any other product made by Whirlpool. I want to make sure that a company manufacturing expensive machines designed to break within only a few years of normal use, goes out of business. Spread the Word to everyone you know about Whirlpools garbage machines. Maybe if enough consumers purchase products from other manufacturers, Whirlpool will get the message that they need to manufacture quality, long lasting machines. Try Speed Queen instead.

Oven was just about 3 years old when the oven bake feature failed the first of many times! Display says fault detected. Was able to get oven cleaning done and then it worked again but eventually has failed repeatedly since. Further reading and support from technicians has revealed its an oven control issue and replacement part is same cost as new oven! Apparently the oven control Whirlpool designed and installed cant handle heat!?? Very unreliable and would never buy their appliances again!

There are plenty of reviews on this board already about how the so called AquaLift technology for oven cleaning is completely worthless so I wont repeat what they have already so eloquently described. AquaLift has managed to take us back in time to around 1947 or whenever it was before the old easy off oven cleaner was invented. I purchased the cleaning kit (affinity) as well but it doesnt do much of anything. The only people who might consider purchasing a stove with AquaLift are those who do no roasting or broiling of meat. The oven looks beautiful, so maybe it could be for those who enjoy a show kitchen and prefer takeout.

Dont buy their produce!!! My refrigerators bought in January 2017 and just use 9 months. It breaks and repairs 3 months. It cannot repair and Whirlpool will refund for me, but I wait long time and no any answer. I try to call Whirlpool customer service. Their staff hold me long time and tell me they will be call back... Oh my God!!! I left my refrigerators 3 months ago. Whirlpool did not care the customer. Terrible company!!!

Whirlpool Washing Machine Model WTW4950XW2: I am 74-1/2 years old and I have been doing laundry for more than 50 years. We have always purchased washers of a brand made by Whirlpool. Until now Ive had nothing but the highest of praise. Two months ago, our washer stopped working and we had to shop for another. After looking at all types and brands of washers, we found out that the only type without an agitator was available. With that choice, we ended up buying the model stated above. I literally hate the way these washers pretend to wash clothes! I apply the detergent properly, place the clothes perfectly around the outer part of the tub, etc., and because there is not enough water that goes into the tub for the clothes to wash even one pair of socks, let alone a full load of clothes, I use the 2nd rinse trying to help matters although it doesnt. I dont care about the amount of the water I use to have clean clothes! The clothes sit in there just rubbing against one another, and then when they are finished, the clothes are so tangled you can hardly get them out of washer and into the dryer! Perhaps the designers of all these current washers think they are saving water, but I can tell you that sometimes I will wash mine twice as I know that I do not feel they are clean! (And I am a clean person and the clothes are not real dirty!) I am so unhappy with the decision of purchasing this horrible excuse for a washer that I could shoot myself. I will discourage every person I know from buying one. I will tell them to have their old washer repaired as many times as possible so they will have clean clothes! It isnt just Whirlpool, but all the manufacturers who have chosen to make this horrible decision for us, housewives, and anyone else who does the laundry where they live. I used to enjoy doing my laundry, but now it is a nightmare. I will tell my friends who are the same age as I am that if they can still find a machine with an agitator to buy 1 or two of them so they wont have to deal with this type of problem for the rest of their lives. I realize that now I have to eat this washer since I have purchased it, but I can tell you one thing; if I could sell it for near the price I paid for it, I would do it in a heartbeat! Realizing whoever reads this; it wont matter one bit and probably will never reach the hands of the ones who couldn’t care less or do something about it, but at least I have made an attempt to help others in the future.

I purchased a new Whirlpool 3.6-cu ft Top-Load Washer (White-On-White) Model #: WTW4800BQ from Lowes on 11/1/14, which was only 3 ½ years ago. The washer began making noise during the spin cycle so we called for service. The technician claimed that the bearing pack needed to be replaced and the repair would cost $400. This amount is $20 higher than the amount I paid to purchase the washer. Because the warranty is only one year, I contacted Whirlpool today and spoke with a representative. The representative said they could repair it under the warranty. When I asked how to proceed, she then asked me if I had an extended warranty. When I replied that if I had an extended warranty, I would be using it. She declined any assistance. I now have to purchase a new washer after only 3 and ½ years. I own 10 rentals. I promise that none of them will ever include a Whirpool product again.

I had my Whirlpool Gold refrigerator for two years. I observed water puddling out of the bottom of the freezer about every three days. I called Whirlpool to find out if there was a recall on my problem. There was none although refrigerator repair companies said there should be as Whirlpool has a defective part. That part is the drain for the freezer as it clogs up and does not allow water to drain and then refreezes. When the freezer automatically defrosts, some ice melts and as a result the water comes out of the bottom and puddles on the floor in front of the refrigerator. I recommend that people do not buy Whirlpool refrigerators unless you are willing to pay over $200 to replace the end of the drain line in about two years.

We purchased a Whirlpool water heater at Lowes for $1100.00. Four years later it isnt working. There are no parts to fix it available at any store in Dallas, TX. We had to call the company. They made us pay the overnight shipping fee for the part. Then the part didnt show up. When we called to find out why isnt the part at my house, they said they found out FedEx doesnt deliver on Saturdays. No one ever called to notify us of this, instead the response was that they would use it as a coaching lesson for not notify the customer. We have now been without hot water in the middle of winter for 5 days. We have no idea when the part will arrive and if it will even fix my defective water heater. We will never buy another Whirlpool product and I strongly encourage anyone who reads this to not buy Whirlpool. They dont stand by their product and have horrible customer service.

The agitation is too loud. I called Whirlpool customer service and said I wanted to return the washing machine because it was so noisy. Whirlpool customer service agreed that it was noisy and said they would send a technician out. Whirlpool customer service never told me the technician they were sending would cost me 25% of the washing machine cost. The technician said this is normal all machines are this loud. Now I am out the cost of the washing machine plus the cost of the technician and all I have is a very noisy washing machine. Im a real satisfied customer. The machine was bought 12 days ago.

The refrigerator fits perfect in my space, keeps frozen (ice cream is creamy not a frozen block ) and cooled foods well. I love the glass shelves. I purchased 2 more bins for the refrigerator door, now I can get all my spices and condiments on the door as well as lots of other things. The freezer has racks instead of glass shelves. The top shelf is adjustable, that is nice in order to use more space. I love the ice and water on the outside of the door.

My mother purchased a Whirlpool gas stove. When the stove arrived the door didnt shut properly. We were told to contact Whirlpool. They sent a repair person out who said that you have to use the stove a few times first and then the door would close. Meanwhile, I had a 2-inch gap and gas and heat escaping. I called and requested another company to come out and check it. No one called back. I called again and they sent out the same repair guy. Apparently hes the only one in the whole Charlotte metro area that can service Whirlpool. Again he said I had to use it more. I called again and requested a different repair person to come out. They promised to send out a lead. When the company called to confirm the appointment they said no one told them that. They finally sent out a different person. That person said absolutely the door was dented. He offered to replace the door. He then came back and said the door comes in too many pieces and he didnt want to put it together so I should contact the store I bought it from and see if they would replace it. Whirlpool refused to repair it. I was able to get the store to replace it after explaining to them the problems with the warranty service. I filed a complaint with the BBB and they lied and said they tried to contact me which never happened. When I called the executive office I was told that I was the problem and that it was resolved so leave them alone. I regret my purchase of my appliances and now have no one to stand by the warranty.

The Whirlpool washing machine I bought is a piece of crap! I only do laundry every 3 weeks/3 loads and the machine broke in 13 months. Now it has broken a fourth time/same part - I have had the machine for 5 years and they can not do anything about it. I will not be buying Whirlpool again - of any kind.

Whirlpool side by side model WR5571CIDM. Unit rattles EVERY time refrigerator is opened or closed + plus every hour or so spontaneously. Rattle seems to come from the water filter area. Whirlpool serviceman says its normal for this model and calls to Whirlpool customer service say just live with it. Hard to believe Whirlpool considers this acceptable performance in a new model.

We purchased our 4 French door refrigerator on 1/22/15. It started making a loud noise, like an air compressor. It continue to get louder and louder over a period of a couple of days. Called the dealer where it was purchased and a repairman was not available for another week. When the repairman showed up and diagnosed the problem which was a leak in the freezer causing ice and the fan to hit the ice, they were not equipped to fix that type of problem. We were advised to call Whirlpool consumer dept. which we did, and was advised they would send out another repairman and would be another week. Have had to move food and freezer items out of refrigerator. Two and one half weeks and no solution. Five month old refrigerator that is not usable. Very disappointed in product and service.

I purchased a Whirlpool hot water heater 2010 and it started having problems 2014. I called customer service. They informed me my 6 year warranty was only for parts and I had to pay for a certified repairman to come and do diagnostic tests and they will pay for parts only. I said the repairman is half the price as the hot water heater and then he has to come install it. Woman on the phone was just as ready to get off the phone as I was! Save yourself and just buy a new one NOT WHIRLPOOL!!!!!!

Bought this from Lowes in 2010 with the 12 yr extended warranty. Have not been able to keep it lit. Takes 4-10 days for repairman just to LOOK AT IT and then he usually has to order a new control valve, taking another 2-4 days (have had the control valve replace 3xs). This means, my husband has to get down at eye level to try to get it to light (hes 63) & if it doesnt light on the 40th try or the cramp in his hand stops him sooner, we have to heat water on the stove, carry it through the house to the bathtub, try to get the temp not too hot or too cool, then hope that our 70 yr old bodies can get down into the tub plus get back out without falling (showers are preferable). My husband bought The best hot water heater $ could buy at our local Lowes store. Because we are getting up there in years, we hoped that this would be the best answer by also getting the extended warranty. They have had numerous repairmen out to our house (6 or 7 last count)... two different men told my husband that they would only be here a couple of minutes knowing it was not going to light for them either. Time wasted. Patience gone. Still they wont replace it because if anyone can get it to light up again, no matter how long that may take, then theres no need to replace it! They have already put more money into parts, labor & repairs than it originally cost. I was told today by the ex. warranty representative that its not considered a lemon! So how do those LOWES/WHIRLPOOL people sleep at night????

In 2013 we thought that we bought a 30 cubic foot refrigerator model no. WRF989SDAM from Appliance Direct, Melbourne, FL. Months later we realized that it was only a 27 cubic foot unit. Two months after the warranty expired the unit started failing. Called the dealer and was told that they would have the service department to call us. Never heard from the dealer again. Finally I called an independent service company. After testing the unit the technician told us that the evaporator may be leaking. They offered to replace it for a price of nearly $500 with only a 90 day warranty. Realizing that it would work at least 90 days after the repair regardless if that was the problem or not.I decided that we did not want to spent that much money. Having refrigerator experience in previous years, I decide to add a piercing valve and adding refrigerant. Every few months I have to add refrigerant to keep the unit going. This unit has run nearly all time since the delivery. Corresponding with Whirlpool is somewhat like throwing a bottle in the ocean. I also noticed that Whirlpool has dropped the price of this unit quite a lot, must be to loss of customers. And yes I am 83 years old and handicapped and never had a problem like this to affect me so much.

My husband and I purchased this washer in August of 2011. Within 2 years the lid broke because of it a cheap plastic frame on a heavy glass lid. At that time I researched it and found many people with the same complaint. Whirlpool would not do anything for us but the company that we purchased it from did agree to supply the part if we paid the labor. We did this and replaced the lid. Well here it is just right at 2 years again and the lid is completely broken and the washer is unusable. There is no way to bypass the lid issue which makes the washer completely useless.I called Whirlpool again and was told there was nothing that could be done and that because there was not a recall on the product, they would not be able to do anything for me. We have purchased a new Samsung washer that received excellent reviews from Consumer reports and we will NEVER buy another Whirlpool product again. I cannot believe a company that old and as large as Whirlpool will not stand behind a faulty design and faulty made piece of equipment. It is very disappointing.

The Whirlpool side-by-side had the space and durability we had hoped for in the price range we shopped in. It lasted longer than the refrigerator it replaced.

We purchased a new Whirlpool in June 2017. About 3 months ago it began making foul tasting ice cubes and now they are so bad we cannot use them. Called Whirlpool for help solving the problem and they basically told me there was no fix. It was my bad water. My water is wonderfully pure and good tasting. It only is bad from the ice in, what I consider a new fridge. They did want to make an appointment for a tech to come out and check it. I dont know why when they told me it cannot be fixed. So sorry we bought a Whirlpool and will never buy any of their products again. Hopefully this will help someone else.

The machine Will Not Clean the Clothes. Had to Buy A Maytag Washer.

Found a crack under a freezer rack from sidewall to back wall. This has caused the refrigerator not to operate properly. Every appliance I own is whirlpool. Bought in 2005. Also bought another in 1994 that is working fine. What surprise me is having a crack in freezer wall. Nothing Whirlpool can or will do! Was a lifetime Whirlpool CUSTOMER. GUESS WHAT? FACEBOOK I GO. 3309 FACEBOOK FRIENDS.

We have a Whirlpool with freezer on top, nothing fancy in the apartment we rent. Twice the lines have clogged up with ice, causing the water to pool in the bottom of the fridge and then leak onto the floor. The maintenance man said this was a common problem in the complex with the refrigerators. Tonight, I heard noise coming out of the fridge. It was so loud it scared the cat. I went to check on it and a juice bottle had exploded in the fridge. It cannot keep an appropriate temperature. Things up front are barely cool and things at the back freeze. We are moving and unfortunately, the house we are buying has Whirlpool as well. When it comes time to replacing the refrigerator, it will not be a Whirlpool!

Purchased a Whirlpool French Door Refrig. Model #WRF 954CIHZ200 in 11/21/2017 from Best Buy for $2300.00 on sale. Within the 1st year the Ice Maker broke & repairman said the ill design caused the wire to break. He had replaced numerous ones for the same reason. In the 2nd yr the freezer started frosting. Next thing the freezer quit. Next day refrig quit working. Called Whirlpool, said, So sorry. We will send you a $50.00 Visa gift card. That was to cover $200.00 of just bought groceries. Called repair guy & he diagnoses compressor was bad. (IN A LESS THAN 2 YR OLD REFRIG. THAT COST $2300.00????)Now, we are 28 day w/o refrig. Living with a Igloo cooler. Whirlpool says they have no stock left on compressors for our refrig. (probably because there are so many going bad in their refrigerators). They are trying to locate one somewhere in US so that takes 6 days then they have to ship to repair center then they have to schedule us for repair which will probably be another 7 days. Ghee, what a mess! Dont do it folks! Buy a LG or Samsung! If I had it to do again, thats what I would do! Whirlpool is Not what they use to be when I trusted them. Years ago. P.S. I bought microwave, stove, & dishwasher! They are all unsatisfactory! Never again!???

The silverware comes out all spotty and water stays inside cups and on dishes. I am going to have to replace all my utensils. They are so spotted that they look filthy. Knives, forks, spoons and all serving utensils. I have used this brand new Whirlpool dishwasher from August, 12, 2016 to today Oct. 21, 2016. I am very upset.

I purchased a gas range with JDR8895 last 09/06/2007 at Home Depot in Metro Denver for approximately $1700.00. I will make my final payment on my Home Depot account next month. I was preparing dinner last September 10, 2011. I had the pans on the cooktop, one on the right rear and one on the left front burners. This was the set up because the right front burner has stopped working some time ago. Both burners were on a low setting as I was simmering pasta sauce and just warming water as I was later going to boil it for the noodles. I was in my living room when I started to smell something odd. When I approached my kitchen, there was a fire coming from the rear of the cooktop and beneath the three burner knobs. It smelled like an electrical fire. I immediately turned off the burners with my hand wrapped in a towel and started putting out the fire by hitting it with the towel and blowing. The towel caught on fire. I grabbed my fire extinguisher and was ready to spray when finally, it looked like it burned out. The smell in my home is terrible, when I tried to test the lower burner it looked like it was catching on fire underneath the knob as well, so i immediately turned it off and batted it with a towel. Im not sure what happened here. I will make my final payment on this range next month and had the previous range in here since 1977 and that still worked fine. I spent a small fortune on this Jenn-Air, only to have it catch on fire that could have potentially burned my house down.On various web sites including consumer affairs, JDR8895 has many reports of fires. If this is a known problem, why has it not been addressed as a recall? My 9-year old was making soup the day before while I was in the living room. This could of easily happened to her! It is a very dangerous situation to put your consumers in!Whirlpool Corporation contacted the appliance repair company, Columbine Appliances, to inform them that they would only be covering the cost of their visit and not the cost of the parts to be replaced in the range (the ones that caught on fire). Through Columbine Appliance, Whirlpool wanted to inform me that this is not a safety hazard and that it was my fault as I got water in the control knobs. This is not true. If I did, I was not aware and was unable to find any literature about that being a safety hazard or that it could cause a fire. I have found and have forwarded to the CPSC many instances of this exact problem, often when the range was not even in use and are happening to other consumers. I am working on combining the data, contacting the other consumers and have since refused service on the range by Columbine Appliances. Whirlpool only tried to contact me after I left them a message regarding the status of the range and that I had no interest in paying for what I viewed as a defect in their range and a safety hazard. I found a news story of this range going up in flames. Its unbelievable that this company continues to stand behind this product and blame these fires on the consumers actions. I am disabled and have an oxygen machine in my home. I have no desire to have this unit catch on fire again and potentially die, especially since water does, on occasion, end up on cooktops. Thank you for your time and attention to this matter.

I have a brand new Whirlpool washer (Model WFW9640XW). It has been broken for 3 of the five weeks I have owned it. The Whirlpool cusotmer care cannot get me a working part in order to fix the machine. I am being told that I just have to wait until they find the part, with no end in sight. I am held hostage now that they have my money. I am told there is nobody I can talk to to break this impasse.

Im so disappointed with this product. Its only a couple of years old, which seems fairly new as my old washer was over 20 years old when I finally got rid of it because of the noise it was making! First, the Cabrio stopped draining and spinning, even though the display showed that the cycle was done. Phoned Whirlpool, and the best they could do was send out a repairman - at our cost, of course! We refused, and kept using the machine - put it on for an extra drain and spin. Then, it stopped working completely! My husband hauled it out to a repair shop and was told it needs a new motherboard at a cost of $400 plus labor! This was an expensive washing machine, and I feel Whirlpool should offer its customers better service! I guess we need to buy a new machine - definitely not Whirlpool!!

I have a roughly 2-year-old 30 Whirlpool electric range that has just got out of warranty 4 or 5 months ago. It has been a great stove up until the last couple of months. We have had 4 incidents where the burner would shoot up to high on its own even with the knob down at medium or low. 4 times in the last month, it has come close to catching fire while we were cooking. I have contacted Whirlpool about this issue and have yet to get a response.

I purchased this Cabrio washing machine in December of 2016. I have had a huge amount of trouble with the soap not washing out along with it tangling my clothes. This has to be the worst machine I have ever purchased.

I bought a Whirlpool over the stove microwave. It was to replace a GE that was over nine years old. 40 days after purchase and installation the plastic started chipping and peeling. I contacted Whirlpool customer service and was told that it was a cosmetic problem and my warranty stated that I had thirty days of warranty on cosmetic problems. This was a problem because chipping and cracking didnt happen within 30 days. The chipping and cracking continued to get worse. I again called customer service because the warranty stated that workmanship and bad parts were covered up to one year. I was told that because it was over my stove that this was to be expected. I thought this was a dumb answer because had I known that an over the stove microwave would have problems from cooking I would have installed it in my living room over the television. I called customer service several times. One of the times I called I talked to a representative who actually acted as if she wanted to help me. She suggested sending an e-mail with pictures and gave me an e-mail address. I did this and got no response. I was getting close to the warranty expiration date. I called again and was told that pictures wouldnt work; I would have to pay to have a serviceman come out and write a statement saying that it was not cosmetic. The cracking and chipping is so bad that I cant clean parts of the door because the cloth or sponges catch on the cracks. The door on the GE microwave did not look as bad after nine years of use as the Whirlpool does after 1 year and 8 days of use. I am not the smartest person in the world but I know the difference between poor quality material and workmanship as opposed to cosmetic problems. Im pretty sure that if my wife put her makeup on and pieces of her face started cracking and falling off she wouldnt want to hear that it is not a real problem its only cosmetic. Bottom line is I am very dissatisfied with the poor customer service and warranty problems I have experienced. I will not buy another Whirlpool product and would strongly suggest to others to buy any brand but Whirlpool.

We have been very satisfied with the way our dishwasher has performed over the years. It cleans the dishes well. It runs somewhat quietly. It doesnt seem to use too much detergent to get the dishes clean.

Purchased a GGE388LXS04 electric range in June of 2013 from Lowes. In September 2013 one of the top burners went out, under warranty Whirlpool repaired the burner. Now after attempting to use the self cleaning mode for the oven, the ovens (top and bottom) along with warmer device do not work at all. This issue is evidently a major issue with Whirlpools electric ovens. Will call Whirlpool tomorrow as the oven is still under warranty, will also call Lowes and see if they will replace the oven with an oven with a comparable brand. Wish I had read this site before we purchased this oven. A very bad experience.

I am very upset with this company. I bought my fridge two months ago from Sears. The fridge is leaking water and Im having a lot of problems with the freezer and the ice maker isnt working at all. Ive been trying to reach the company but they always leave me hanging in the phone and never answer and keep hanging up. I am very upset with this company. I wasted a lot of money for nothing. Please people dont buy fridges from Whirlpool and dont waste your money.

Within six months, the plastic surrounding the oven and the plastic handle began began to crack. Company was of no help. Also, the screen says to change filter, even after you put in a new filter. Extremely disappointed.

Our just over 1 year old Whirlpool washer died completely last month (mid May). After calling them and being directed to the extended warranty dept (which we ended up purchasing), a repair guy came out and told us it was our main controller board. Three days later, he returned with the board and nothing. We were then told it was the user interface. They were on backorder until June 5, which means our machine would be out of commission for three weeks. I just received another call informing us the part was now on backorder until June 15. Whirlpool, on what planet is it acceptable for your appliances to be out of commission for six full weeks? Never again.

Ive had a Whirlpool range for not even a year yet and the thing is on its third repair! First, the motherboard goes out twice. Then, a month after the second motherboard replacement, the broiler drawer handles melts off! ABT has been good at repairing it but seriously, I got the appliance last May! Now, Ive been waiting two months for some insulation piece on the handle. I think this product is a lemon and I am highly disappointed in this brand. I had called Whirlpool regarding this and they said their technicians would have to inspect the product and repair it. I trust them less to repair the stove than ABT!

There is a chronic and well-known problem with recent French door, bottom freezer refrigerators sold by Whirlpool, including the the brand names KitchenAid, Jenn-Air, Maytag, and Amana. The problem is caused when the defrost drain freezes, preventing defrosted water from reaching the evaporation pan. After enough water builds up, it overflows along the front of the refrigerator. In my particular case, we have wood floors and they were ruined by the water. After doing some investigation on the internet, I have learned that this problem affected approximately 1,500 model numbers sold under these names. These model numbers are listed in a Technical Service Pointer issued by Whirlpool.In August 2013, after experiencing several years of problems with these units, Whirlpool issued a Technical Service Pointer W10632338, advising service technicians that a new P Trap drain tube kit was now available, and suggesting that the defective duck bill check valve should be replaced by this new part. The problem for years had been that the rubber duck bill check valve would, over time, become sticky (or tacky) and would then not open - causing water to build up above it. Eventually, the water would freeze and since newly defrosted water could no longer escape, it would build up and eventually overflow.From what Ive seen online, plus a conversation with the Sears technician who come out to diagnose and repair my leak, I am convinced there are many thousands of customers who have experienced this problem. Because it takes a while for the rubber check valve to become sticky and no longer open, it is not uncommon for the problem to not appear until after the standard one-year warranty has expired. From reports, Whirlpool has sometimes acknowledged the problem and effected repair of refrigerators no longer under warranty.But what about those customers, like me, who have experienced water damage to floors and cabinets? Shouldnt Whirlpool be liable for those repairs, too? Id be interested to know if anyone knows of plans for a class action lawsuit.

Whirlpool Cabrio Model Wtw8000BW - Purchased machine Jan. 2014. It does not wash my clothes clean. Clothes come out with dirty streaks all over them. The clothes I dry on a line smell dirty, like they werent rinsed properly. I have been cleaning the machine the first of every month per the instructions. I will never buy another HE washer again, this is my second one. Purchased a new one with an agitator.

We bought a Cabrio washing machine two years ago. I have had to have a repairman out twice for it shooting water out of the top (from a top-loading machine). They repaired that and its better. But this goes off balance ALL the time. I cant even wash a load of towels without it going off balance. We bought this one as it was supposed to handle large blankets and even my lightweight king size comforters. Yeah. Did once or twice, then started the off-balance stuff. It grows MOLD in the bleach, softener, and detergent dispensers.I wrote to the company and included pictures. They were really rude about it. I finally found how to remove the dispensers to clean them, but it is very difficult. I HATE this machine and will never buy a Whirlpool again. (Our refrigerator, which was in our house when we bought it, is also a Whirlpool. It is poorly designed and collect dust in the coils UNDER the thing and you cannot reach them to clean it. Coils are behind other pieces that block being able to clean them.) Whirlpool is a horrible company and doesnt stand behind their products, in my experience.

We replaced older GE with the giant front load model that can do king size sheets and comforters. It has worked like a champ. It was a bit more but worth it for us. In a year and a half no issues no problems and I like the control lock feature so I dont keep hitting it off when I go thru the laundry room to the garage.

My Brother-In-Law bought a Whirlpool Gas Water Heater from Lowes last year. The Water Heater was still under warranty and would not stay lit. He called Whirlpool and they told him to send them a picture of where the water heater was installed (really? a picture). They told him he could not order the replacement part which was a Thermopile because he had to have a licensed person install it? Really? In your own home? My husband finally got Lowes to order the part because Whirlpools only help was for him to purchase a new water heater and Lowes would give him 10% off a new one. Lowes and Whirlpool have a monopoly on water heaters. Whirlpool is the only brand that Lowes sells. So if you want your warranty to be good on a water heater DO NOT BUY WHIRLPOOL.

Our Whirlpool Duet Washer started sounding like a jet engine 13 months after purchase. We spent $800 on a washer and it started to get very loud during spin cycle. After reading several reviews online with other people describing the same problem, figured it was the bearings. $800 to do my laundry for 13 months kind of crazy right. It would have cost almost $300 for the extended warranty through Whirlpool. In order to have it repaired, the cost would be around $600 because the drum and bearings need to be replaced at this point. Whirlpool’s customer service was no help and pretended they had never heard of this problem. However, reading reviews online tells me otherwise. I can buy a new Samsung on sale for $623, so that is the route we will probably take. We feel extremely cheated by what was once a well-known, reputable company. We will not buy Whirlpool/Maytag again until they put more emphasis on quality products with a cost efficient, longer duration warranty plan.

This French Door refrigerator looked beautiful. There are only two of us in the home. We purchased it at the end of 2014 and it just keeps getting worse. The front of each shelving has cracked. They look like they are dried out plastic the way it cracks. The drawer tracks have seem to keep crumbling pieces off. This is not a cheap refrigerator by no means, this is the first time buying Whirlpool, and I believe the last time.

Just wondered if anyone else has had a problem with the paint bubbling up and peeling off their washer and/or dryer. My washer and dryer are in my laundry room off the kitchen with a heat and air vent in the room and I dont understand why my paint is doing this. They are about 5 years old and have always been in this room, never in a garage or basement. My dryer was rusting on the outside about 3 years ago and even though I bought the extended warranty, Whirlpool said it was only cosmetic and they wouldnt do anything about it. I bought them at Lowes and they were good enough to give me a new one to replace it. Both of the machines now have the paint bubbling up and peeling off and there is nothing that can be done. Anybody else have this problem and if so what can be done to repair the paint? This is my 3rd set of Whirlpool washer and dryers over the past 44 years and I will purchase another brand next time.

The oven is a joke. It does not self-clean. I have to buy oven cleaner and clean the oven like in the distant past. They are lying about it being self-cleaning. Do yourself a favor and buy a real self-cleaning oven. NEVER WHIRLPOOL.

We purchased the Whirlpool double oven gas range from Lowes in July of 2014. The oven heat that boils out onto the stove top when you use either oven makes it difficult to handle the pots on the range top. The first time I used both ovens at the same time the plastic front to the control panel started to melt and the fumes were horrible. It was under warranty so Whirlpool replaced it with an identical panel that also melted when I used the top oven and range top at the same time. Its out of warranty so Whirlpool says its not their problem. From reading these other complaints it is obvious to me that customer satisfaction is not important to Whirlpool - just that profit margin. Build cheap - sell high should be their motto.

Whirlpool Cabrio Platinum WTW8500BWO - It doesnt wash anything very well. I hate it. Dont want it. Wish I didnt buy it. I do all kinds and sizes of loads. My clothes come out dirty - I have to wash my clothes 2 or 3 times.

I purchased a new Whirlpool (2015) Model: WRF736SDAM13 French Door Refrigerator. Two days later, water was dripping from the light in the top of the refrigerator. I was removing about a cup of water twice a day, which dripped from the light. The company was friendly when I called, and offered a replacement or repair. I elected the repair as I felt that would be acceptable. The repair man inspected the refrigerator and determined the problem to be condensation from the water holding tank, located in the top of the refrigerator. He stated that because the incoming water has the opportunity to reach room temperature prior to entering the fridge, and because of the high temperatures (80’s & 90’s) the water holding tank has condensation that collects in the top of the refrigerator, which drips onto the top of inter refrigerator liner, and eventually drips through the light. He stated there is no fix, as it is not broken. While it is not broken, this is a bad design error, which would affect anyone who lives in an area where the temperatures exceed 80 degrees outside, which could only be fixed with a collection tray that would allow the water not to drip into the refrigerator. Currently there is none available. Because I only had the refrigerator for two days before the problem was reported, Lowes allowed me to make an immediate exchange. However, had this been purchased during cooler temperatures, the issue would not have been noticed until after the 30-day time frame and the exchange would not have been an option. When I made the exchange, I noticed that all the 3 & 4 door refrigerators are made the same and will have the same problem. I ended up exchanging it for a Samsung model. Kudos to Lowes. Whirlpool, you need to find a fix for this problem if you want to sell me another one.

Im guessing the company that makes Whirlpool appliances no longer make dependable appliances… bought home 2 yrs. ago. Bought Whirlpool over stove microwave and expensive side by side fridge. After 1 yr. microwave stopped heating. Now my fridge is no longer cooling. Have cleaned it underneath, did all a normal person would do. I replaced my microwave last year with a Maytag. I’m sure I will have to replace the fridge very soon. My stove is a Maytag. Dishwasher a Frigidaire... have had no problem. Just the Whirlpools… Will never buy another Whirlpool. Not just me, my niece bought a microwave. Her stopped heating after one year.

We had the same thing happen. We purchased a brand new home and within 6mo the plastic around the handle started breaking off and pieces would fall into any food that was being cooked on the stove. Whirlpool fixed it for free but now the same thing is happening with the new door.

Whirlpool Microwave WMH1164XWS-1 - Well, Im sure surprised that my almost five year old Whirlpool microwave failed to heat this evening. One minute it worked, next it didnt. Watched countless repair videos, but it seems more aggravation taking the unit out and trying to diagnose the issue than its worth. Probably the same with enlisting the services of a repair tech. Ill probably think twice about purchasing another Whirlpool microwave. I purchased a Whirlpool French Door Refrigerator a few months ago and now Im concerned Ill have the same issues. All my appliances were Whirlpool and purchased ten years ago and replaced with newer models, even though I never had any repair issues. Guess they dont make them like they used to!

I bought this Whirlpool America dishwasher because it was cheap. Even though Im Canadian, I like patriotism and I could get behind the American flag logo on the washer. Let me just say, if you like when food comes off your plates, and attaches to your cups, then this is the dishwasher for you. It is always a surprise when you open the door to discover which dishes have been cleaned, and which dishes have inherited the food particles from the now clean dishes. This appliance really helps you work on time management as you are required to wash all your dishes before you put them into the dishwasher. 0/10 would not recommend for anyone who wants clean dishes.

I am 72 years old and this Whirlpool Energy Star HE Washing Machine is just useless. It does not clean clothes properly. It always leaves a stinky washing machine smell which never goes away despite no matter what you do. A completely useless, faulty washing machine! Never ever buy a Whirlpool HE washing machine! Some websites say that you need to buy a washer fan at a cost of $69.99 and attach it to the back of your washing machine as this is the only way you can get rid of the smell. Who has that kind of money? Why is this fan not already included in this washing machine if Whirlpool is aware of the smelly washing machine/smelly clothes problem? This is such a joke! We would like to be reimbursed for our deficient Whirlpool Washing Machine or at the very least, have a recall of this inefficient, poorly designed washing machine. Report them to the Better Business Bureau and anyone else you think can resolve this problem - thanks!! - Unhappy camper

Awful customer service. We bought a washing machine in 2010 and it has shredded a ton of clothes over the years. I called customer service to see what they could do to help me with this problem. After about 45 minutes of trying to get more than a service that I would have to be responsible for, the supervisor offered me a new washer at a discounted price. I went online to compare and found out I could purchase the exact same washing machine at home depot & best buy for $50 cheaper. I called back to see if there was anything they could have done and they would not budge.Shame on you Whirlpool. You have lost a customer and I will make sure no one I know buys one of your products ever again. I cannot believe that you would not make any accommodations for us. We bought that washing machine with the intention of keeping it for 15 years. It has cost us countless amounts of blankets, shirts, pants, etc. I cant believe you wouldnt help us after all the money this piece of junk cost us.

Got this refrigerator when I old one of 10 years through AHS home warranty. I asked for a similar one to the one we had. Surprisingly we received the Whirlpool which turns out to 5 times better than are old GE. Same height and width but deeper and with more compartments. We are extremely happy with it

I purchased this washer (Whirlpool Cabrio HE) 2 years ago against the advise of many people including my husband due to the cost, $850 for what is now no more than a large paper weight! It had never really done a good job at cleaning our clothes. About 6 months ago, it started not spinning enough to remove all the water from the load. I thought, no big deal, I will just use the extra spin cycle. It became the normal thing - wash, spin, extra spin. Well, then it became wash, spin, extra spin, extra spin. I noticed 3 months ago that it was not even agitating. It fills up, sounds like it is agitating and then drains. There was no movement from inside at all. All along I am getting from my husband. told you not to buy it! I gave in and called the repairman - $185 for a console, $26 for a sensor and $55 for a couple of drum clips and then the $35/hour for the repairs. I would rather spend a couple hundred dollars and buy a washer with an agitator that really works. I would never recommend this washer to anyone!

I purchased this Whirlpool washer (model WTW7600XW2) on October 2011. Fabric softener dispenser is full of water at end of cycle. Repairman has replaced parts three times, but the problem is still not corrected. Today, I talked with a Whirlpool supervisor. She says this is normal. She told me to take the cup out and empty it. The cup is not removable, so she said I could blot it out with a cloth or sponge. I paid $800.00 for a washer with an automatic fabric dispenser that I must empty manually. I have used whirlpool appliances for 50 years of marriage, but this is my last one. I am very disappointed with customer service.

Whirlpool side by side. When the compressor cycles, there is a loud knocking noise. Called Whirlpool when under warranty with no results. They could not tell me the cause of the knocking. Sort of live with it attitude. The funny part is when we have someone visiting and the knocking starts, they are puzzled as to why we are not answering the door. Sounds like someone knocking on the front door. We have been whirlpool customers for 30 years. Probably will not be so in the future. Too bad that a great company has go the way of the Nash and Studebaker automobile.

I purchased whirlpool Model# WFG540H0ES gas with convection. I purchased it because the price was $1000 dollars less than comparable ovens and even now the price has gone up $300 since I purchased it. I really wanted the luxe look at a discount price, a burner that you could lay a grill over, and five burners which it provided all of those things. I hesitated to buy this oven because the door fell off the last Whirlpool within three years and they refused to fix it so I tried not to buy this brand but it had the amenities I wanted for the price I could afford. I really like the oven. I like the oven the best because it really does make a great cake. I like the two large grates that sit across the oven. It makes it feel high end. If you dont wipe the range immediately grease gets stuck on the range and is hard to clean. This is what I like the least. Im ready to wipe on the weekend and its too late. It took me four days of internet comparison to decide on this one. The house is not painted, the cabinets are falling off the wall literally but I am extremely proud of this oven and it makes me feel affluent even though Im not.

Our water heater pilot light has started to randomly shut off leaving us with cold water to shower in on numerous occasions. We hired a local appliance company that we are familiar with to come out and look at it. The tech thought that replacing a part would fix it. It didnt (which I will take up with them). After doing what Whirlpool asked us to do it still is not working. I called them back to warranty the tank and the rep keeps repeating it is a limited warranty so basically I have to pay the service call and labor charges to look at, repair or replace which is going to cost nearly as much as it will to just buy a new one.

I have had this range since 2008 and used the self-clean last week. (I dont use the oven that often) Since the clean it has not heated up to required temp. I just called Whirlpool and a tech is coming out this Friday (Nov. 15th 2013). If it is determined to be the self-clean that did in fact cause this, the tech calls for an authorization and the repair is covered by Whirlpool. I will report back what happens.

Whirlpool Double wall-mounted Oven model#WOD51EC7AW05. Have had nothing but problems (at least 7 problems). The 1st one is a potential fire hazard. Porcelain/enamel shattered on bottom interior panel of BOTH ovens in less than 60 days (exposing underlying metal to rust). Cracked in an odd stress-pattern that indicates the metal expanded during heating, and the porcelain finish did not tolerate the expansion. The lower oven had only been used 2X before I noticed the fracture pattern. Obviously faulty design; a manufacturers defect. Whirlpool claims it is cosmetic damage and when porcelain eventually flakes off, they will send me touch-up paint. (If I dent the outside of an appliance with my wheelchair, thats cosmetic damage. Its a manufacturers defect if the damage happens during normal operation. The appliance damaged itself, not the user.)The preheat function does not work on either oven. The oven indicates it is 350-degrees, when it is actually 125-degrees. Repairman says this is normal; ignore the indicator and navigate by store-bought thermometers”. The temperature can vary 50 degrees on either side of the actual setting (thats a 100 degree range!). Between the faulty preheat and the wide range in temperature, it makes it very hard to bake bread or cake.The rest are annoying problems: The timer is a single “beep” (not even very loud), followed by another single beep every minute. This is not much help if you are folding laundry while the cookies bake. The windows have so many dots on them theyre not clear enough to see how the food is cooking (or read the store-bought thermometers) without opening the doors. The oven produces a lot of steam that fogs up the windows (Ive never had this happen, and Im past the half century point). The exhaust fan is loud and it blows hot air into the drawer under the oven (another potential fire hazard). Dont buy this oven. It has several design flaws and Whirlpool does not stand behind their product.

So I had a problem with the water heater after 2 years and had the sensor fix by my heating people. Now the water heater is 3 years old and started leaking from the top of the water heater. Called my heating people and they fix the pipe and coupling on top but he told me the water was still bubbling up at the top. He told me it could stop and 70% it would be ok. Went to check on it and it continues to leak so I called Whirlpool because it was still under warranty. They are the most horrible people to deal with. First of all I told the guy it was leaking from the top but he asked me if it was leaking out of the side pipe. Didnt know what he was talking about and he kept sighing on the phone. If I knew about water heaters I wouldnt be calling them. After all the questions it came down to it was leaking where I told him at the top. He gave me a number and told me to take the water heater back to Lowes and get a new one and then call them and they would move the warranty over to the new heater. Really???? We are not talking about clothes you want to bring back to a store. Asked him how I should do this and he told me to call a heating contractor. So does he think that the heating contractor and going to run the water heater back for a new one??? In the end I just called my heating people and they are going to send somebody out to install a new heater. So much for Whirlpools warranty. If this is under warranty and it is exclusive to Lowes then they should be having Lowes bring a new one and install it.

Purchased this oven on 9/12 from Sears, did not purchase an extended warranty and didnt think it was necessary. Im a 64 year old widow and only use the oven on holidays, to date Ive used the over 5 times. With Easter coming, I decided to clean the oven. Followed the instructions, the door locked and the oven died. Im totally disappointed, now it would cost over 100.00 to repair, money I cannot afford. Called Sears and all I was told over and over again that they can send a repaid person and I would have to pay. I was also told that I should have purchased a Kenmore and I wouldnt have had a problem and finally I was told that they couldnt fix it and referred me to whirlpool customer service, who also told me it would cost over 100.00. A 19 month oven should not have died. It should have cleaned the oven and continue to work for many more years. Again, Im upset, angry and disappointed with sears & whirlpool. And dont know what to do. Does anyone else have this problem with the oven, is there a recall?

I am very happy with this dishwasher. It is not a high end, rather middle of the road, but is very quiet, does a great job of cleaning my dishes and pots and pans.

DO NOT BUY THIS DISHWASHER (Whirlpool Gold Series dishwasher)!!! We bought a camp with this dishwasher in it brand new. It has been serviced three times in the past year because the dishes (especially utensils) do not dry. The service company first said it was because I needed to use jet dry. What a joke! I told them I was using jet dry so they sent a service man out. He had to read a manual in order to try and figure out what was wrong with it. He then decided the entire motherboard needed replacing and he would order the part. He came back, replaced the part and it still did not fix the problem.I called again to complain so they sent another service man out and he said the drying air vent may not be working. They came back out to replace it weeks later because the part was on back order. Wonder Why??? I still have to dry the utensils every time I run the dishwasher. The interior walls of the dishwasher are wet even after running through the drying cycle. Either this dishwasher is a lemon or Whirlpool is selling a dishwasher that does not dry to the consumers!!! So BEWARE!!!

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

I bought an American US Craftmaster water heater in October 2006. I have paid a plumber 3 different times to work on this and the pilot light will not stay lite. I used the replacement parts they sent, followed their technicians directions over the phone, etc. Nothing seems to work. Christmas was not pleasant at my house this year. I’m still taking cold showers.

The Whirlpool duet model wfw9150ww01 washing machine is a piece junk. After using it for two years, the bearing has gone out on it and it sounds like a freight train. It will cost $600 to repair it. We only paid $575 for it. What a rip off. Whirlpool makes junk only. Buy something else.

I purchased Whirlpool top loading washing machine model # WTW57ESVW less than 2 years ago. It stopped working yesterday. I had a trusted professional repairman evaluate it today. The motor needs to be replaced after less than 2 years?! The customer service reps basically said sorry. I should have purchased the extended warranty. Is it not reasonable to trust that a Whirlpool washing machine motor should last more than 2 years.I am very unhappy and very angry that Whirlpool will not stand behind their product. The last customer service rep I spoke to suggested she could send one of their repairmen and replace the motor at a cost to me of $299.00. So, after less than 2 years, I am offered an amount to pay of about half the cost I paid less than 2 years ago for the brand new washing machine. My home is full of Whirlpool appliances. I have been a good and loyal customer for over 30 years. I am very angry and upset with Whirlpool. Please explain to me why it is not reasonable for me to trust and believe that a Whirlpool top loading machine that is well cared for and not abused in any fashion should last longer than 2 years? Is this being a loyal Whirlpool customer gets you, I should have purchased the extended warranty”? We are talking about a motor here, not a fabric or bleach dispenser that breaks. Although, those parts should not break either, there is a big difference from something like that and a motor. Please contact me as soon as possible at either number listed above. Thank you.

I purchased a total of four Whirlpool appliances in June of 2008. Almost thirteen months after the installation of all four appliances, I experienced a problem with the control panel on the Gas Range GW397LXUB, and a sensor control problem with the Microwave GH5184XPB5. Fortunately, Whirlpool agreed to repair the appliances at no charge because it was so close to the end of the warranty. The microwave was an easy fix and simply had to be unplugged, reset and plugged back in. However, the entire electronic control panel had to be replaced on the gas range. Several of the buttons simply stopped working and I was only able to bake at 350 degrees. Again, almost thirteen months after the installation of the new control panel, it happened again. Same buttons stopped working. When I contacted Whirlpool, they refused to replace the part because I was no longer under warranty. Whirlpool refused to admit that there was a problem with the control panel, so I guess it was a crazy coincidence that I experienced the exact same problem on both. I filed an official complaint with Whirlpool in hopes that if enough people do so, they will issue a recall. I am now experiencing a problem with my refrigerator ED5FHAXSB03. The fan vibrates so loudly that you can hear it throughout the entire house.

We bought a top loaded Whirlpool washer, model WTW5000DW2 last May from Lowe’s for a summer beach cottage. It has been a terrible experience. There was a 30 day warranty from Lowe’s which unfortunately we missed because we had not moved down for the summer till after the 30 days. Working through Whirlpool, they sent an independent contractor out 5 times over the summer. Control panel was replaced twice. It never worked properly. I’m now back for the summer, and it still does not work. Do not buy this washer.

We purchased the washing machine on February 2, 2013 and initially noticed that some of the clothes were still dry when the complete load was over. Meaning that I am not saving water cost because I then have to rewash the clothes and pre-scrub the clothes. Then a little over a year later, the machine is making this extremely loud piercing noise when spinning. The cost to replace the part is $250.00+ the repairmans fee. Whirlpool says there is nothing they will do. From reading the other reviews, this is really sad because of the numerous people having the same issueS with a capital S. I definitely would support a class action suit.

The worst washing machine ever. First off you cannot turn the water on to let it fill and add clothes as its filling. Secondly the Normal setting will not allow you to spin on low, your choice is high or no spin. High tangles your pants, slacks, shirts, etc. No spin leaves them soaking wet. Also its a water safer but never, never, never covers the clothes in water, and sometimes they dont come out smelling so clean. I dont save water if I have to rewash two or three times. Absolutely hate this washing machine. When I get enough money I am going back to the old agitator model and not any Whirlpool either. Oh and the other thing, you cant just throw you clothes in the washer, you must arrange then to the outside of the center itty bitty agitator. Hate it.

I bought a Whirlpool Cabrio washer about 1 1/2 years ago. It has been in the shop 2 times and is doing the same thing again of not completing a wash cycle and draining. I WILL NEVER BUY Whirlpool appliance again. If I could sue I would.

I have had this refrigerator for 23 months. The ice maker has been a continual problem. It overfills and water runs onto my hardwood floor. After four service calls for the ice maker, the defroster heater caught on fire and melted the interior wall of the freezer. Not sure if we fixed the ice maker since we had the fire four days after the last service call. My service rep declared the refrigerator unrepairable. Fortunately I had purchased an extended warranty and they refunded 85% of the purchase price after 2 years of use. Besides the ice maker problem and the fire, I also had trouble with food freezing in the refrigerator compartment. I dont recommend this model, but my repairman says that Whirlpool is as good as it gets.

This washing machine was already in the house when we purchased the house two years ago. In those two years, it has performed well for the most part. It has many different cleaning options, the clothes come out clean, it saves on the amount of water it uses, it’s quiet and I like the fact that it is a front loading washer.

I bought a high-efficiency Whirlpool washing machine in August 2011. One week after the warranty ran out, it stopped working. I called Whirlpool who, of course, would not fix my problem because I no longer had a warranty but did put me in touch with a repair company in my area. They came out and fixed it for 100 bucks, service and parts (service, of course, cost more than the part/labor). I didnt mind the hundred bucks, whatever. My washer was working again.Two weeks ago, I experienced yet another problem with my washing machine. Now, I understand machines getting used a lot over the years and eventually burning out, but this machine is a little more than a year old. I should not be experiencing problems with such a new machine. The problem was when the machine reached the spin cycle, it would just stop working and then lights would start blinking, blah, blah, blah. I called the repairman again who came out and reset my machine, hoping that that would work. He then told me if it happened again to let him know and he would have to replace the motherboard. Okay, I can live with that. Another 73 bucks, thats fine. Of course, this didnt work, and we ended up replacing the motherboard. Another 178 bucks - thats $324 that I have now invested in a washing machine, half of what it cost to begin with. But its an investment, right? And I need clean clothes so whatever.I was a little wary when the repairman told me that a problem with the motherboard may be related to a problem with the motor, that it can send signals to the motherboard if its not working and is just a symptom of the actual diagnosis. I guess he was right because 3 loads into using my newly repaired washing machine and the same problem has arisen, yet again. I refuse to invest any more money into what is obviously a lemon. Rest assured I will never again purchase a Whirlpool product, regardless of what type of appliance it is.

The oven works well. My complaint is that the glass door is very difficult to clean. Some kind of liquid got in between the panels and I cannot clean the glass without removing the oven door. Im afraid to remove the door as I may not be able to get it back on the oven. I have dirty glass I cant clean and that makes me unhappy. Otherwise the oven works just fine.

Four year old Whirlpool Refrigerator/Freezer Model W10771736A. Ice maker broke right after the warranty ended. No refrigerator or certified whirlpool repairman was able to fix the problem. Our microwave is cracked on the side, and it is only four years old.

Purchased a home recently that had a Whirlpool dishwasher installed within it. Havent lived here for more than 2 weeks. Go to use the dishwasher a week ago and the dishwasher wont turn on. Its brand new! We tried resetting the breaker and all the tricks on the website page. So we called Whirlpool to have them send someone out and diagnose the problem... a week later. The appliance repair man comes out and says its not receiving the proper voltage for the dishwasher to run. So I contact the electric company that installed the electric wires within the home and they came out the next day to check their work. The electrician found that there was the proper voltage coming into the lines for the dishwasher to run and in fact it is the dishwasher. So at this point Im back to square one and called Whirlpool again. At this point, I just wanted them to replace the dishwasher with a new one (same model, no upgrade) since it hasnt even been 30 days of owning the thing and its already having issues. I havent even used it once. I didnt think I was crazy for asking for a new one. Especially when the problem seems to be electrically related. They tell me another person has to come back out and deem the product unrepairable for them to exchange the product for a new one. They tell me its going to be yet again another week for someone to come deem it repairable or not. But wait heres a 75 dollar Visa gift card for your inconvenience. How about you spend the 75 dollars on hiring a technician to come fix it today? Had a similar problem with a LG appliance and they sent me a new one with no hassle without even sending a tech out to see if it was repairable or not. Buyers beware! Dont waste your money on Whirlpool. Clearly they do not care about their customers. They would rather spend more money in technician fees than to just admit their product isnt functioning correctly and replace it.

My dryer has to run twice to completely dry my clothes. I had it serviced still a problem. My washer has had some issues but repaired and working fine. I will never buy this name brand again. Not sure what I will buy next.

I purchased my first Whirlpool washer in 1959 and have been true to the brand since. This was a big mistake when I bought the WTW4950XW0. At first I thought it was the learning curve on my part with the new technology. The very first wash load was dry on the top layer....never got wet. Then there was the blinking red light .....you could never leave the room and expect it to continue to do anything. One solution I found was to unplug the washer....wait 30 seconds and plug in and follow with lifting the lid and then close the lid followed by holding the start button down for several seconds. This worked sometimes.Very noisy....sounds like a plane taking off after the gears shift and lots of clicking and a long pause to have the water to enter the washer. I have run out of patience. I am going to buy another washer today. I called Whirlpool twice for advice and they offered none but a high dollar repair and no compensation for the lemon I had in my home. Enough is enough.

Whirlpool microwave oven a few months old stopped working. Customer service center not helpful with prolonged holds (>30 minutes), no response to email, and amazingly no response to live chat. The 800 number was busy at one point for over an hour. When I finally did get thru, there was no coordination with local repair men, and a factory delay on the parts. I am going on 6 weeks without a functioning microwave and 3 kids at home. Thanks Whirlpool.

My whirlpool Duet Washer has been repaired twice in three years for more than half the cost of the original product. Now it faces another repair--not worth it!Shouldnt a major appliance last longer than three years? Whirlpool will do absolutely nothing.