Purchased my Whirlpool gas hot water heater. After 1 1/2 yrs, the blinking light shut off, called tech at Whirlpool, made me move hot water heater to outside. I moved it outside and when called back, I was then told to send 4 photos to prove that I moved it, in which I did that. He told me that still was not right... and still he would not help with reset. I live in my parents old home w/ water heater in bathroom for 50 yrs. No problem... it was vented thru ceiling to attic. Now it is outside, unlit, in a steel hub (as directed) and still not ok...I have no hot water and have not for 4 weeks now... Whirlpool sucks... never buy their hot water heaters. Had to pay a serviceman $750 to move heater, run cold/hot water lines and gas line and it still does not work... with NO HELP from Whirlpool. Now I am in process of buying an electric hot water heater and have to pay an electrician to run a 220... I am on fixed income and this stinks... biggest regret... WHIRLPOOL.

Purchased a new French door Whirlpool fridge May. It replaced a Whirlpool that was here when we purchased the home. Ten days after purchase the fridge went to 21 degrees and began freezing over food and drinks. Yesterday a tech replaced parts to repair the fridge. Today the fridge is once again at 21 degrees and freezing food and drinks. We live in a relatively rural area. Tech cant come back until six days from now. Very disappointed. Wish we considered another brand.

I purchased a Duet several years ago and did not have a clue as to the problems everyone was having. Over the course of ownership I called the city to determine if we had a sewer leak. I had a plumber inspect our pipes. I felt really stupid that it took me this long to figure out it was the washer. I knew it smelled like mildew and have been using vinegar, afresh, Clorox until I am blue in the face. I didnt figure out that the sewers smell was also the same as the washers until I got on line and read about these machines. Finally, I lifted up the gasket around the door and it was completely black with mold. No amount of afresh was going to fix this problem. Do not purchase these front loaders. Feel like they should have been recalled and I really dont understand why they are still in circulation. I have also been having health/breathing issues and I cant help but think the mold is causing my illness.

My Whirlpool microwave oven is terrible. The whole point of a microwave is to cook things faster and make ones life easier. The main problem is food doesnt actually cook due to sensors. Cooking bacon, for example, should be a simple, quick item that easily cooks in a microwave within minutes. Not w/ this Whirlpool! The sensor would not allow the bacon to cook - even after 20 minutes of trying!! Foods such as Bob Evans family sized mashed potatoes cant be cooked either. The sensor in this microwave ensures that only the outer layer is hot while the middle is stone cold. Also, the fan has never worked from day 1, and were now on 6 months of ownership. This wasnt a cheap microwave either, so Im SOL. Please dont make the mistake I made. Dont buy Whirlpool.

I updated appliances in new house, but didnt realize the builder would choose the smaller side by side frigidaire. Could use a larger freezer space, also would like a ice maker that cut off when bucket is full. Overall I love Whirlpool appliances.

I am a senior who has not used the Whirlpool Range installed by the builder in 2007 very much. First of all, I did not like the way the covered jets hid the lighted jets when they were turned on low. Then about 8 months ago, I smelled gas and no one had used the range. I checked the knobs and one was turned slightly without any gas lit. I know that for years the companies were required to have push-in knob before you could turn them for safety reasons (especially children). These knobs barely push in before turning so that they can easily be accidentally brushed against and leak gas, which is exactly what happened to me again today. My daughter was visiting. Neither of us had used the range and when she left, I sat in my living room and smelled gas. I immediately checked the range and the small front jet was turned slightly on. The odor was so strong that I know it had to have been on for some time. Its been an hour and Im still airing out the house. I have used gas ranges for over fifty years and never had a problem such as this. Im thankful that I do not have issues with my sense of smell. Otherwise, I would not be sitting here writing this.

We bought this dishwasher because it was rated on the quieter side... It was purchased in 1999 and is still operating like new. I am amazed it has never broken down. I have wanted to replace it but my wife says Why?

My stove is good, I have gone through 2 refrigerators in less than 8 years and the replacement is having issues. Service is a joke, customer service is questionable but trying to assist but at this point will not recommend whirlpool products.

I have a Whirlpool AccuBake gas range. I started by contacting my local repairman because my stove was out of warranty. The first company came out 3 times and replaced three parts, which didnt work. The cost was $297.00. I originally paid $598.00 for the stove. After they deemed it non-repairable, I contacted Whirlpool. They basically said it was my fault for not buying the warranty. I then contacted the BBB. Anne ** from Whirlpool contacted me and had another Whirlpool service tech come out at no charge to me. But guess what, they deemed it non-repairable too. Its a shame that companies no longer stand behind their product. Its very apparent that this is a manufacturers defect. They should replace the stove.

Purchased a Whirlpool refrigerator model WRF560SEYM in June 2014. In February 2015 the ice maker had to be repaired because of a leak. Now in February of 2016 the ice maker and water dispenser are leaking. Because the warranty is one year, Im basically stuck with a refrigerator that sucks. Not only is the ice maker and water dispenser broken, the door sometimes doesnt shut properly and the shelving couldnt possibly be more cheaply made. This refrigerator is in a vacation home and has barely been used. I have purchased many Whirlpool appliances on the past and have never seen such poor quality in an appliance. The only thing Whirlpool can offer is sorry youre stuck!! No more Whirlpool for me!!

We purchased this Kitchen Aid stove December 7, 2016. I dont use the oven much, but have found that when it gets a little dirty and I use the Aqua Life function, it does not clean. Have tried by setting a pan of water in the bottom and raising the temperature to 300 degrees, but nothing cleans. We went with this feature to be more environmentally responsible. Leons, where we purchased the stove, claims that they have heard nothing of this issue and have not been informed of this by their head office.

KitchenAid double oven glass exploded during the self-clean cycle. The oven was purchased on 9-20-11 and the glass exploded on 11-30-11 during the first-use of the self-cleaning cycle. The cavity was damaged with dents and shards of glass from the explosion. Unfortunately, the warranty for KitchenAid is replacement of parts and repair only. Nicole, supervisor at Whirlpool, offered to extend the warranty 6 months. Then I was somehow disconnected from the call.

Im very satisfied with the looks and performance of my Whirlpool dishwasher, it is quiet enough that I put it on to wash before going to bed. It is that quiet. Im not happy about the way it was installed, but that is no fault of the dishwasher or Whirlpool, it works great even though it sits kind of crooked in the cabinet. The dishes are always sparkling clean and dry when it is done washing.

Originally installed early 2007, the very expensive unit went crazy after about 14 months, with random beeping noises, and non-response to keyboard entry. Sometimes unplugging the unit worked. When unplugging no longer worked, the unit was repaired by replacing the keyboard logic boards only to fail again the same way.about a year later. It appeared the heat or steam from the cooktop below the microwave was causing the failures, so we became careful to ensure the fan was on. Last week, after boiling some water, the unit failed again, with error code F2H2, the keyboard error. Didnt Whirlpool expect the microwave to survive heat or steam from the stove/cooktop below? Overall, the unit is great when it works. Unfortunately due to the large size of the 2 cu ft unit, only an identical unit will fit. Im skeptical of replacing my broken unit with another Whirlpool Velos unless this keyboard problem has been fixed in new units. Anybody know if Whirlpool has fixed this problem?

We purchased the extended warranty (service plan number **). The washing machine has been giving trouble. It locks out during every wash cycle and each time, we have to unplug the machine to reset it. Sometimes it makes it through the next cycle and sometimes, not. The first couple of calls we made, we were told to make sure it was cleaned, to make sure it was leveled. All this was done and we still have the same problem. Finally, a technician was sent out. He could not duplicate the problem and left. Thirty minutes after he left, the machine locked out again. We put in for another call, we were told it would be two more days. In the meantime, we actually video taped the next three times it locked up. This time, when the technician came out, he was able to see our video as well as saw the machine lock up. He stated, It did not give me a code so I do not know what else to do. He left and ten minutes after he left, it locked out again. We immediately called back and they informed us they could not get anyone out again until next week. This is very frustrating to have an obvious problem and have an extended warranty and the problem cannot be solved. We feel as if we are being blown off. Is there anything you can do to help us and/or give us advise of how to get this problem resolved?

I have an oven hood Whirlpool Microwave. Even though its more of a basic model it has worked terrific so far at about 5 years old. Only draw back is the extremely loud 4 beep alarm upon completion of warming up food. I actually cringe when it is about to go off especially early in the morning. Ours doesnt have the handy options button to turn it off. I have tried other combos with the buttons to see if they have it set up different but to no avail. Does anyone know if you can shut it off. The people who design these things must not have babies because they would think of this at nap time Im sure. Truly the sound this thing emits could wake the dead! I also had the fancy Whirlpool before like some folks mentioned about the handle and door frame cracking and disintegrating. Guess what, so did my parents, sisters, aunts and my neighbors. Definitely a major design flaw or faulty materials. My sister, mom got new doors and they began cracking again within a year!

My Whirlpool washer would start up but would not add any water. It sat there doing absolutely nothing. Then it showed a code on the screen. It said to disconnect the power for 1 minute and plug it back in, which I did. I repeated that process several times. Still nothing. It also said to call Whirlpool, which I did. They wanted the Model # WFW97HEXLO and Serial #, I gave it to the gal on the phone at Whirlpool. I was told it would be a week before they could get someone out there to take a look at it. Really!! I work 80 hours a week and live in the country. I dont have a week. When I asked where the service man was coming from, he was coming from another town. I asked if there was someone closer. She gave me another appliance stores phone number. They showed up 2 business days later, looked at my washer, verified the code along with the Model and Serial #s, telling me it was the control panel. I gave that information to them on a Friday, they showed up on a Tuesday. They knew what that code was and what it meant for that make and model washer, but there just had to be a service call in there. The part was ordered on that Tuesday... here it is the following Saturday and the part still isnt here. I do not understand what takes Whirlpool so long to ship the part. Do they not care that in this hustle bustle life we live in, we dont have time to wait for a part that may or may not show up. Ship it overnight. That is an option. Making the parts accessible to the service people in a timely manner would make great customer-service. Better yet, how about going back to the old-style washers. This high-efficiency non-sense is highly expensive.

I purchased a Whirlpool Refrigerator with French Doors, Model No. GX5SHDXVD03. Within 1 year and 4 months, I had to replace the defrost control board. I spoke to Whirlpools customer service, George ** said he was sorry for my inconvenience but that he refuses to help in any way because I missed the warranty period by 4 months. I spent $352.74 for the parts and labor and lost hundreds more in food. Do not purchase any Whirlpool products. I was told that the boards have been going out frequently.

Whirlpool built in oven. This piece of junk quit operating 6 months after purchase a brand new oven. I have called numerous times only to be treated like ** on you guys shoes. My next move is court. I didnt pay 1150.00 for nothing. I purchased a then what I thought to be a best buy. Very very disappointed.

I have had my stove for 3 years and it works fine. However since I have become a grandparent, I have been extremely worried about the chance of being burnt. the problem is once you turn off the burner, it doesnt look any different than it does when not in use. It stays hot for a very long time however. Hot enough to burn or melt anything. There is no blocking a child from reaching up and touching it. I have placed a loaf of bread near it only to have it melt down the side. The burner didnt look hot at all. This was at least 15 min. after turning off the burner. Im not trying to cause issues but I believe this is a real danger, not only at the risk of someone getting a burn but also to the point of an entire family losing their home or even their lives. A simple flammable item being knocked over could start a fire. I ask that someone look into these risk.

I placed a service call for a high pitch sound that emanates from our new Whirlpool refrigerator MD#WRF990SALM00. It is hardly perceptible although hurts my wife and Is ears. The technician was courteous and efficient although said that the sound was typical of this model. He did find another issue with condensation forming at the top and returned with the repair part in a timely manner. I placed another call to Whirlpool whom suggested that I order a different authorized service company to investigate although if the results of the call was that it is a typical sound of this model that there would be a service call charge. I will most likely order this service call in the future although I will wait to see if there are any similar issues that arise. If you experience the same problem with your Whirlpool Appliance please leave your experience. Thank you.

Purchased Whirlpool Washer Mod# WTW57ESV1 12/9/2011. Washers transmission blew on 1/20/2012. Requested Whirlpool replacement. No results. Will never purchase Whirlpool products again.

3-4 years ago, I had replaced my hot water heater with a Whirlpool, which was purchased at Lowes. On 10/23/11, I awoke to a flooded basement from the said water heater. When I entered the basement, I was able to verify that the water was spraying right from the casing of the unit. Who knows how long it had been spraying, but the place was a complete mess. The water was about 10 inches deep and many things were ruined. I proceeded back to Lowes and purchased another exact unit. This morning I awoke to the sound of what seemed to be water bubbling, only to enter the basement and see exactly what I saw just three weeks previously... another flooded basement from water just pouring out the side of the unit. This is an obvious defect in craftsmanship. Now I find myself with a flooded basement, no hot water, and a decision to make. Do I fight for another replacement or give up on the brand? A replacement water heater will solve my lack of hot water but for now, the question is for how long? Not to mention the cost and time spent with the clean up I did twice.

Bought in October 2014. Died December 2015. The previous Whirlpool microwave this unit replaced was 10 years old and carried a 5 year warranty on the magnetron. Imagine my dismay to find out this unit carried only a 1 year warranty on the magnetron. So 2 months past warranty expiration Im left with a dead unit. I performed elementary troubleshooting. The unit has a fuse on the 120 Volt input. But the unit must be disassembled to gain access to the fuse. So what SHOULD be a five minute job turned into an hour and a half. The fuse wasnt the problem - replacement fuses blew like popcorn. Fuse placement within the unit without regard for service considerations is a poor design.To their credit, Whirlpool agreed to cover the cost of repairs if I would pay for labor. I agreed. A tech came out and looked at the unit. He said that he would have to order a bunch of parts and that he would be back in contact by the end of the week. Three weeks went by. There was no call from the tech; my messages on his voicemail generated no response. So a couple of days later I purchased a replacement from a competing manufacturer.

I bought a refrigerator from Lowe’s and the refrigerator had a lot of manufacturing defects. I called Whirlpool and 3 techs were sent to my house. After the last tech, Whirlpool decided to exchange the refrigerator. Since then, Whirlpool has been playing games with me.

I bought a new Cabrio washer in August of 2011, and by December of 2011, it sounds like a jet engine when washing or spinning. It is still under warranty, but it is the same issue reported by countless others as I have discovered. Whirlpool should recall and find out what the problem is so that every consumer does not have to experience this issue.I will never buy Whirlpool again and I am going to make sure I spread the word about this machine to keep others from this experience.

Ice maker not working. Freezer not working. Fridge not working. There is some cooling in the fridge/freezer system - maybe 50 degrees. Not under warranty, 2 years old. Repair person is coming. Will edit when I have more details.

Just got new side by side to replace old one. Motor runs every 30 minutes. Stays cold and makes ice but Im concerned about noise. Called Whirlpool and was told to record noise and show to Home Depot where it was purchased. No help from either place. Need to call warranty company. Funny thing it arrived with pieces of some sort of shrub in drawers. I guess this is new and improved and energy saving like newer washer that takes 45 minutes to wash a load.

I just bought a Whirlpool Gas Range from Home Depot on 11/11/2014 and I am having problems with the oven. It is still under warranty and have five year protection plan. I called to have the problem fixed. Two technicians and the oven still doesnt work.

This is a comment for the person with the ice maker problem. I have a side-by-side, in-door ice dispenser that clogs up. First sign of problem is either the ice wont come out or it comes out crushed. What happens is frost builds up in the path the ice takes at a couple of different points. The only solution I have found is as soon as the problem starts I turn off the ice maker using the switch on the inside of the freezer. Then let it empty with normal use (if you wait too long youve increased your problems). The release button for the ice bin has frozen by now so you cant just lift it out. The bin needs to be empty. When it is empty, work the bin loose and take it out. Youll find that frost and maybe cubes have collected, frozen and blocked the passage. Be sure to turn the ice bin on its side and spray water into the undercarriage to melt and remove all the ice build up there. I use a hot sponge to melt the frost in the ice tube and then dry everything. This gets messy so be prepared to have water on the floor. Dry the ice bin and reinstall it. Ice cubes will be ready to drop from the ice maker so it wont be long until you have plenty. I live in Florida with high humidity so need to go through this process about once a month. Its a pain, but now it is just part of owning this unit. Good luck and hope this helps.

I bought this washing machine in May 5, 2012 and delivered in July from Paddys Market. We do not use the machine that much because me and my wife and two kids living in the house. Yesterday I put my clothes in the machine and left it to wash it. When I went to get my clothes, water was all over the place in the basement and the machine was beeping and reading code LF. I turn off the machine and turned on back. Water started to fill and then suddenly water started to coming from the bottom of the machine. I removed the bottom panel and I could see the water was coming very fast from the bottom of the basket (the drum shape). I called the private company to repair it and waiting to find out.

We bought a duet set front loader washer and dryer on 3/14/2010 and our washer already needs new bearing and costs about as much as a new washer. I think that is pretty bad when you can’t get two years out of a product and then can’t get anyone to help unless you want to pay out. I will not buy another Whirlpool product! Done!

I have had problems with my electric range (Whirlpool) since day one. It always ran hot. I wrote letters to Whirlpool and received one very condescending phone call. Now two days before Thanksgiving it is running terribly hot from 350 to 500 degrees. When I called Whirlpool they said the best they could do was offer me a maintenance plan for 293.00.

Never ever go for Whirlpool. It has the worst customer service. We brought an oven but accidentally we broke the inner oven plate. We called up the customer care person on 18002081800 and tried asking him the dimensions of the plate pr at least how we could reorder it. He never listened to us. He just got our details. Said that technician will come at 11am tomorrow and disconnected the call when we were trying to explain what our query is all about. Is that all the respect a customer deserves!? Is that how whirlpool trains their service people!? He doesnt even have the basic courtesy to listen to the customer, I wonder how was he even recruited as a customer care person. If you want at least your basic respect, please DONT BUY WHIRLPOOL.

We started noticing pools of water on the floor on the left side of the freezer. We would then open up the drawer and it was covered in ice. The water was not noticed until the morning so it has caused damage to the floor and molding in our house that was built in 2012. I called the repair company that I used to have my Whirlpool oven fixed (broke twice). That is when the manager gave me the lowdown on what has been happening with this fridge. He told me to call Whirlpool and have them pay for the repair and part and to research online, that it is a design flaw with the freezer and the p-trap and draining under the ice maker being not efficient.I called Whirlpool and complained. All of my appliances are Whirlpool and I spoke to a Supervisor. They only would not agree to pay for the repair and only will pay for the part (which is only $27.00). This fridge is 15 months old and I am irate at the lack of customer loyalty from Whirlpool. They responded the exact same way when my oven broke a month out of warranty. I will never buy another Whirlpool appliance again, and would like buyers to be aware before they buy an almost $2,000 fridge.

Cabrio washer - I have always had a Whirlpool appliances and have always been satisfied with them, but this is the worst washer ever manufactured. I bought it to wash heavy loads of jeans and it takes me all day to wash 1 load because it is always out of balance. No matter what setting I put it on I have to keep rearranging the load. Without putting up with that, the load takes 87 minutes on bulky wash. That is far too long and then you add all the time I spend rearranging it to get it to work. I think there should be a recall or at least admit you have a poor design. My son works for Whirlpool, but Im not sure I will be supporting this company again.

We purchased a Whirlpool Cabrio washer brand new from Lowes. It did great for about 6 months when a terrible grinding noise started. Then it also would not spin dry the clothes - they would come out completely soaked. Repair guy came out and fixed it. Lasted for about 1 year - same thing again. Lasted about 1.5 years this time and now the loud grinding is back and my wife - who Ive heard cuss just a couple times in 20+ years - said, This ** thing sucks. The clothes are soaked. I cant stand this washing machine. So, Off we go to buy a new machine. Definitely not a Whirlpool though. Id give this machine 1 star because it does a decent job for a while but major repairs 3 times in five years is not what I deem an acceptable appliance.

We have the four-door model, french fridge part, drawer, and bottom freezer. Overall has been a good appliance. Icemaker burned out in third year. Icemaker replacement is very noisy, popping and groaning during drop-out and refill. Noise level otherwise is average.

I love the brand. I just do not care for the lock lid on all the new washers. I could do without it. I do not have kids to worry about getting hurt. Im looking into finding a brand without a lock lid. I just replaced one before this one. For the lid breaking.

Doesnt clean unless you prewash (by hand). Top rack unstable, falls off runner easily. Level of liquid indicator on rinse aid container broke so I cant tell how much is in it. Main door spring doesnt work so that you cant open door halfway. It flops all the way open. Very ordinary features and I dont use the dry feature. Nothing to praise here. Size is adequate for my needs. However, the bottom section where plates go isnt well designed. Dishes dont fit well. You cant put the plates in a line but there are space left over on the side thats wasted. This is the worst dishwasher I ever had. They seem to get flimsier all the time.

My old dishwasher washed much better than this one. For one thing, I do not think having the silverware basket in the door is a hindrance more than anything. For one thing, the silverware does not always get clean. Even some of the dishes do not get clean. I think the engineering of the dishwasher is poor. When you pull the bottom rack out to put more dirty dishes in, it gets caught on the silverware that are in the silverware basket in the door. Makes it very difficult to get the bottom rack out or in. I have no gripe on the size of the dishwasher. I would just like it to wash the dishes and silverware clean. The appearance of the dishwasher is good but that doesnt clean the dishes. I am more than satisfied with the appearance of it. I do like the buttons being at the top of the dishwasher so that a person cannot bump them when it is running. I just think the design of it could have been much better. My other dishwasher had the silverware basket inside on the bottom rack and I really liked that and if I ever buy another dishwasher, I would make sure that it is inside the dishwasher. I dont believe that Whirlpool is the company it used to be. I have an oven that has been nothing but a problem for me and it is a self-cleaning oven but I cant even use the self-cleaning feature because it blows something in it and it doesnt get hot and clean it. Have had it fixed twice and the company that sold it to us will not even talk to us about it. Im not sure that I would buy another Whirlpool appliance of any kind again.

I purchased my Whirlpool side by side refrigerator approximately 6 months ago. Immediately upon delivery the compressor showed itself to be very noisy, especially upon start up. I questioned the delivery persons and was told it would become quieter with time. It did I not. In fact, in the following days it got worse. I contacted Whirlpool and was sent an “approved” repairman. The confusions and scheduling difficulties in this process, however, were many. Finally, when the man did arrive. He listened and said the refrigerator was working but agreed it was loud but apologized there was nothing he could do.I called Whirlpool again several times to note the noise and constantly was given the sympathy of people saying they “understood but there was nothing they could do.” Finally, out of desperation I contacted the store where I had purchased the refrigerator and they sent a manager who agreed the unit was unreasonably loud and took the refrigerator back. I researched the Whirlpool company and found they are essentially the same company that makes several other common American name brands, so I made a point not to purchase from any of these companies. Instead, I purchased from a foreign manufacturer and couldn’t be happier. All I can say is I tried to buy American but have been greatly disappointed by both the product and lack of customer service by Whirlpool. I will not buy from them or their other companies again.

Too many times my clothing comes out dirtier than what it was going in... Sometimes my clothes come out dry in spots, never washed, lint and white soap spots on clothing as if never washed after a whole cycle. Huge waste of money and time. Cant trust any positive reviews about Whirlpool, they have to be rigged!!! I will never purchase another Whirlpool product again.

Size was greatest consideration, then cost. Next was power consumption. Quality claims were of no value, since ALL are made in China/Korea. Korean made would be a better choice than China. Am satisfied, but not greatly, as refrig. bottom freezer died a few days out of warranty. YouTube video had my exact refrig. so fixed it myself. Bottom freezer drawer keeps coming off its slides, but I live with it. Top refrig. section freezes things on top shelf, but 2 and 3 shelves down, temp is 39 to 42 = cannot get even temp. As a former inspector, I know about air circulation, crowding.

LED Freezer Lamp stopped after eight months, $14, not covered under warranty. OEM water filters are costly. Icemaker is noisy, ice dispenser chute clogs. When refrigerator was set at 38-40 degrees the eggs and most top and middle shelf items partially froze. Noisy compressor. Good price from Home Depot sale in Nov. 2019.

We purchased the gas slide in range with gas oven. Immediately the temperature would hold a consistent heat, therefore it continually reset with a start sound (swoosh) every 5 minutes. The manual says it will do this, but clearly this is not normal. Then, the oven stopped working, showing an error message FBE0, that the cooling fan is not at high enough speeds! It sounds as though, along with hundreds of other people, we have all been ripped off! If anyone can please tell me what can be done about these defective stoves, I would appreciate it, thanks very much!

My water heater burner went out after just over 3 years caused the pilot to go out. I was worried that although all parts were covered for 12 years and labor for only 3 and the labor would be very expensive. When I called and told them about the problem they said the part was covered and would ship it next day air but 10 minutes later another rep called and said they would cover the labor as well and to check a nearby service company as they might have the part in stock. Long story short without having to scream and yell my problem was corrected within 8 hours and all I have to do is drop off the new burner at the service company when it arrives. I have been lucky and haven't had many warranty problems in my life but none that I have had have been resolved so painlessly. I will never buy anything but Whirlpool from this day forward. Thank you Whirlpool.

1st item - ice pooling at bottom of freezer, now repaired at a cost of $100. 2nd item - 1 day later fridge/freezer keeps shutting off and on irregularly. Cant contact anyone one from Whirlpool on a weekend and Trail Appliances doesnt have anyone available to come and look at it and if they did it would cost us another $100+ with no guarantee and we were told by Trail the Whirlpool will not touch it if someone else does. From what I have read seems we now a victim of Whirlpool. P.s. for those who dont know yet Whirlpool not only now owns Bastemp, they also are the makers of Kenmore and those fridges have experience the same ice issues.

Whirlpool Washing Machine Model WTW4950XW0 - This washing machine was purchased as a gift by my father. We have owned this machine for about 2 years. I am very disappointed with the quality of this machine. I have 3 children and several pets. I use my machine a lot and need a quality item that will last. This machine is not that item. Within a few months, the machine was off balance and bolts had to be tightened. We have had problems with the belt, bolts coming loose and the machine not draining.More recently, the machine has become very loud... For approximately the last 6 months. My husband has taken the machine apart and looked for anything to be wrong with it and has found nothing. Now the machine is not running. I will turn it on and it fills with water and then stops. I will clear it out and restart it and it does the same thing. Another issue has been with spinning and draining. The clothes are soaking wet even after the drain/spin cycle.I have researched what could possibly be wrong with this machine and have found a vast number of items that could need replaced. With the money I have already put into fixing this machine in the past and the amount it will cost to fix it this time, I believe I will be further ahead if I buy a new machine made by a different company. I will not be buying a Whirlpool product again.

I have many rentals, and for over 39 years have always bought Whirlpool dishwashers for them and my own home. I have noticed over the last 15 years or so they are getting more and more poorly made. First I quit buying the plastic tub ones because they collected mold on the back. Then putting one in a rental, we went through 3 brand new ones that all leaked before we got a good one. Now, I bought the very best for my home 2 years ago, had the pump replaced under warranty due to leaks. Now, the plastic upper rack wheel has snapped off its plastic base. For under 30 dollars you get a replacement kit for it, that is all metal. So why didnt Whirlpool just put in the metal ones and charge a little more. So this will be my last Whirlpool, and all the brands they make. Do your research, many of the name brands you know are all made by Whirlpool.

Ive read a lot of reviews on here for Whirlpool Cabrio Washer and Dryer saying horrible things and maybe I lucked out? We got our set at Lowes a couple of years ago and havent had issues. We use Gain HE liquid detergent in the washer and have no problems. We also do the recommended routine cleanings of the machine as the manual says. I pick the settings for what we have, clothing wise, and it washes appropriately and things are clean, no marks or other things people have mentioned. I will click on extra rinse and adjust the soil level if something is particularly yucky. The dryer is great as well as long as you select the proper type of wash you have going on. I tend to do more dry setting and things never come out wrinkled. Sorry for all those who have had bad experiences. Also, others have complained about the noise...our old machine had an agitator and was very loud. Our machines are in a closed room and most of the time we dont hear a thing until the bell rings. Maybe wed hear more if they were in an open area or garage where noise echoes?

Freezer froze up and water runs into refrigerator part. I am 80 years old and have never had any problems with any of my ref (except ice makers) before, but I have never owned a Whirlpool ref before. We have purchased Sears chest type deep freezers without any problems and have been very satisfied with freezers. This frig/freezer is a real bummer.

We have a 2008 Whirlpool gas range that has worked reasonably well but lately more and more of the electronic push switches on the keypad have stopped functioning. So now I cant set an oven temperature as only a few of the 10 number switches still work. I talked to an appliance repair guy who said that the typical electronic keypads are notorious for burning out after 3-5 years because of heat transfer from the oven. So now Im stuck with an oven that is virtually unusable and a $400-500 cost to replace the keypad control. Is it worth replacing? Can the faulty control buttons be somehow fixed? Shouldnt Whirlpool acknowledge the faulty design and provide a free (and hopefully better) keypad? There must be thousands of people out there with similar circumstances. What about a class action suit? Any advice/opinions out there?

My comments are similar to all the other comments on here regarding the Whirlpool Cabrio washer: I bought a Whirlpool Cabrio 5 years ago and have been sorry every wash day since. I have to wash my clothes twice because the machine doesnt fill the tub with enough water to get the clothes clean. I have tried using the bulky setting for all loads to try to get the water level high enough to at least cover the clothes. This is a terrible design and the worst piece of junk. I will never buy a Whirlpool product again...

DO NOT BUY THIS MACHINE. Mine is less than 2 years old. First one month after warranty expired, the clear lid cracked...$350 to replace! Then a few days ago a rusted circuit board came apart and jammed up my washer. This should NEVER happen. I contacted customer service and they told me that they are not covering this problem and that the service call is $175 and cannot estimate the repair cost. They also could not send a repair person out for 5 days. The washer has not been repaired yet so I do not know the entire cost but it will be expensive!

On October 21st 2011, Michael sent their technician, Steve, to my residence to check my washing machine. I was in the house the whole duration of his visit. After testing he concluded that the control board of my machine is faulty. Although he brought with him his own control board but he never showed me my machine working when he installed his control board, even though I was in the house at the time. With my lack of knowledge at the time, I missed requesting that he show me the machine working with his control board. But he should have involved me in the diagnosis since I was just home and should have been his initiative. Anyway, Steve then said that the total cost of the control board plus service is $194.03 on top of the diagnosis fee of $81.19. I was taken aback with the cost since working used washing machine on Craigslist just cost $150. So I said I can only pay him for his diagnosis of $81.19 by personal check. He issued me an invoice with account number **. I also thought that I also could get a cheaper control board online which I did. Also, I know I have the right not to purchase control board from them as long as the diagnosis was accurate since I paid for it. So I ordered a control board from ApplianceZone.com and also chatted with a technician named Kelly. Based on the symptoms I related to her, Kelly confidently said that the issue is not with the control board but the Control panel is the one that is faulty. Kellys diagnosis was different from Steves but since Steve has personally checked my machine, I decided to purchase a control board. When the board arrived on Octpber 25th, I immediately installed it as its easy to install since I followed simple instructions how to install it myself. But when I installed the new control board it manifested the same issue as the original part.. So I called Steve over the phone and he said the new control board.I purchased also faulty and that I have to replace it which I did. Then the second new control board arrived on November 8th and when I installed it, exactly same issue again manifested. That was then I suspected probably Steve misdiagnosed my Washing Machine. So I tried calling Depew the same day but wasnt able to reach Steve. Instead another guy named Kenneth answered the phone. He said that Steve has the right diagnosis but I insisted that I recalled Steve never showed me the washing machine working with his control board installed so Im doubting he got the correct diagnosis. Since it wasnt helping me at all, I decided to visit personally their store on November 8,th 2011 at 5933 Burnet Rd Austin TX, to request an audience with their manager. Then I met the manager named Michael ** who I believe is also the owner of the company. After introducing myself and explained the issue and told him that I wasnt satisfied with the service rendered by Steve because with two new control boards why is my machine still not working so I believe Steve got an incorrect diagnosis. I was a dissatisfied customer and I was hoping they would find a way to help me since I already paid them $81.19 but to my surprise, this Michael ** was so rude, his response was We have done our job, you are on your own now. We dont need your business. Good Bye I said Is this how you treat your customers? he answered me This is how I treat you.. I felt discriminated and insulted by his unprofessionalism. I couldnt imagine an owner of a business treating a customer like that. Before I left, I told him that I will report him to Whirlpool since they referred Depew to me and I would also report to the Texas Attorney General. He just said Go ahead and do what you want to do. We have nothing to do with you; I couldnt believe we have a business owner like this here in Austin TX. I really appreciate you helping me with this issue with Depew Appliance especially with this issue with their manager Michael Depew. I also demand refund of $81.19 for the diagnosis as they dont deserve to be paid and also they should pay me the cost of the control board $85.13. Lastly, I like to request that whatever license this company is holding must be reviewed as his dealing with me as customer is nothing short of discriminatory.

Bearing on washer drum began getting louder at two years. Service man stated that Tide and a few other detergents were destroying the washer bearing seal. He told us that neither Tide nor Whirlpool will admit the problem exists. The cost of repairing the washer is close to the purchase price. Whirlpool should be subject to a class action lawsuit!

Since my review I have been corresponding with Whirlpool Customer Service (Chris). First he sent me an email and mailed a replacement board to have us (the homeowner) install. Because the cover was so melted, the replacement board would not fit down into it. I emailed pictures to Chris. Once he saw the pictures, he called me and arranged for the water heater to be replaced since it was still under warranty. He even extended the authorization code so we would have plenty of time to arrange for a plumber to do the work. We had to pay for the plumber, but Whirlpool arranged for us to have a new water heater. Now I can sleep at night without worrying that my house would burn down if the old water heater caught fire. Chris was GREAT to work with. I had a direct number to him and called any time I had a question. I was very impressed with Whirlpools Customer Service.

We moved into our house about 5 years ago. We didnt know how old the heater was so 2 years after moving in, we replaced it with a Whirlpool Electric Water Heater. (2009) Last August, (2 1/2 years after installation) we found our carpet soaked in the room adjacent to the water heater and discovered it had been leaking into my finished basement for who knows how long. We contacted Whirlpool and they said they would replace the heater but I had to pay for the install because it was over a year. Mind you I had just paid 300 bucks 2 1/2 years before to put that one in. So I paid another 300 bucks to have a plumber come out and install this one. I had extensive damage to my basement, rug, walls with mildew and possible mold from the water. I went through my homeowners insurance and had almost $5000.00 worth of damage.So about a week ago my husband calls me downstairs and guess what, my brand new rug that I had replaced 11 months ago due to a leaking Whirlpool Water Heater was soaked again. This heater, 11 months old, leaked yet again!!! Needless to say Im beside myself, especially when I call Whirlpool and they will replace it, again, but who the hell wants to have damage to their finished basement every year??? When I called and asked them to pay for the damage this time because I cant possibly put another claim in with my insurance in less than a year for the same thing, they just say that they will have the labor charges dismissed as a courtesy. As a courtesy??? I said its been less than a year so they owe me the labor charges; she said no that it goes by the original warranty from 2009. What??? Thats utterly ridiculous and how is it possible that they can get away with this. That has to be against some state statue or law, to use the previous warranty on a defective product. So now Im left with about $2000.00 worth of damages this time to my brand new refinished basement all at the hands of Whirlpool. I had to get another one of their heaters because they wouldnt even give me the money for the heater so I could buy a different kind. I will NEVER buy a Whirlpool product again and Id advise to anyone who will listen to spend a little extra to avoid this hassle!

I have a Whirlpool Cabrio WTW5640XW and I was able to get the belt back onto the pulley, about a month back and it ran, loudly, but it ran. Last week the belt popped off again and now the pulleys are screwed, so I probably won’t buy another motor (for the sake of the pulley). Ill get a front loaded Kenmore or something as I was never completely happy with how this thing washed and (didnt dry) our clothes.

Bought a model wdt730pahz in Nov 2017. Up until recently it ran fine and we were very happy. Some folks have reported that the soap dispenser door gets stuck. Same here. In our case we found, when using those detergent pods, to make sure that they are pushed all the way into the dispenser before you close the lid, or the lid jams. Other than that, the dishwasher got the dishes nice and clean. However, after just two years of using it maybe 3 times a week (there are only 2 of us) the motor died. Youd think a new motor ought to survive at least 500 cycles. Anyway, parts and labor was quoted at nearly $400. Debating whether to fix or replace the dishwasher. Might try ordering a motor and pump and replacing it myself.

A Whirlpool hot water heater in an apartment I own would not stay lit. A plumber came to service and told me I needed a part from Whirlpool and that no one in town carried them. I called Whirlpool and after providing all information about the unit, she informed me that she would not send me the part because the serial number was not registered in my name. I explained to her that I purchased the building and did not install the water heater that a prior owner had installed it. All I wanted was a repair part. The Whirlpool rep refused to sell me a part unless I could provide a bill of sale where I purchased the tank. The part cost $41 which I was more than happy to pay for regardless of any warranty coverage. I have an obligation to provide services to my tenants. Being unable to repair the tank for a problem which appears to be commonplace for this brand, I had to replace with a new tank at a cost of $1380.00.

I lodged a complaint of Microwave problem on 05/11/2011, and up to this date (18/11/2011), I am still waiting for the problem to be solved. I have a 1 year old baby. We cook food for him in it. Due to the microwave not working, he is suffering.

My contractor purchased a Whirlpool NU50T61-403 water heater at Lowes. After several months the gas valve stopped working. Whirlpool sent a replacement gas valve which stopped working after a month. When I complained they offered to send another replacement, which I declined. They also offered to have it repaired by 2 firms which were very poorly rated on Yelp. Whirlpool stubbornly refused any other remedy. As I needed to resolve this right away because tenants were depending on having hot water. I replaced it with another hot water heater. In summary I wasted $570 for 9 months of use.

Two years ago, we bought a Whirlpool gas range, model WFG361LVQ2. The range-top grates were porcelain-coated, smooth and shiny. The range itself has worked flawlessly (Admittedly, it gets only light use in our elderly household, which consists of me and my wife). The only complaint I have is that the porcelain on the grates is failing. On one of the grates, its flaking off where the flame contacts with it during cooking (Photos attached). On another two, the porcelain has developed a surface roughness thats clearly a prelude to same type of damage as the first. The fourth grate still appears to be intact. The differences in damage is no doubt due to the different amount of use that each receives.When I called Whirlpool, a supervisor there told me that grates have no specific life expectancy, and that is true for plain metal grates as well has porcelain-coated grates. She also said that some chemicals can penetrate the porcelain and shorten its life. I told her we didnt use any chemicals on the grates, but only rarely used common kitchen scouring powder, and I cant imagine the powder or the chlorine in the powder could do that kind of damage.When I asked what it would cost to replace the four grates, she said $187. I told her the entire stove cost about $500, and it didnt make sense to pay almost $200 to buy grates every two years for the next thirty years. I told her that the grates on our previous (non-Whirlpool) range lasted the life of the range - about forty years. So I declined to purchase new grates, despite her offer of a one-time discount of 25%. Though the grates are becoming eyesores, theyre still perfectly usable. So Ill hang onto them until I can find some bare metal ones to replace them.

I dont know the model you have but this exactly what I just had happen in May. Its what they call the jazz board that is behind the light area inside the front of the refrigerator, where the light bulb goes. This is a circuit board and it seems when connection arent happening properly the fridge wont go into defrost mode and the water freezes over the evaporator not allowing any cold air to the top but working cooling freezer and making lots of frost too. I paid $400 to Sears service repair. The jazz board itself, I kept the old one and you can buy it online for about $100 and a child can do the labor that I paid hundreds for because, like you, I didnt know what the problem was. It takes less than 1 min to do this. I was furious! I hope this helps you and I too will never buy a Whirlpool. I found this site looking for why the refrigerator is making very loud noises, very loud banging, clicking, humming. Its ridiculous!

We purchased a dishwasher for $650 and within a very short period of time, the upper rack was so squeaky that it was intolerable. Service guys came and replaced the rack and wheels and all was well until a few months passed and it happened again. At that point, it was outside of the warranty, so we called upon our extended warranty we bought through Whirlpool. Guess what? That warranty doesnt cover the racks. So they referred us back to Whirlpool. They told us we had to pay for it ourselves. After being treated like a ping pong ball several times, we ended up paying about $150 for labor for another guy to come out and replace the racks again. Whirlpool agreed to pay for the parts. A few months later, we again have a squeaky upper rack that is so loud it wakes people up in our house and its less than two years old at this point. Weve been sold a LEMON!! Just got off the phone with a supervisor at Whirlpool who said they cant do anything about it and wont acknowledge we have a lemon. When I told her I was going to take this as far as I need to to resolve it, even if we have to go to court, she laughed out loud at me. We will never again buy a Whirlpool product. Our LG appliances have been great however.

Purchased double range ovens. Enamel is flaking off within 2 years. Whirlpool denies defect. They wont replace it. Any other folks with similar problems? What can I do to have it replaced? I remember the old ovens and how the enamel just stayed and stayed and stayed. Never a rust or flaking issue in those old time models. Any expertise on how the enameling process may be compromised in the newer manufacturing process (cutting corners or costs). Any options for a class action here if a commonly experienced occurrence? If similar experience drops comments/review below as a one liner - just state enamel defect. That way can figure out the number of folks with issues. Id like to take action if given the opportunity, and more so if this is a common occurrence. Lawyers are costly for one-off complaints, but there is power in numbers (think United Airlines).

We purchased a new Whirlpool dishwasher in June of 2014. By February 2015 the racks were rusting. I called loses warranty and they referred me to Whirlpool since it was still under a year old and covered by the manufacturer warranty. They said no problem and would have new ones sent out. Three months later I still did not get them. I called them back and they said that they were not covering them due to rust being normal. This is the absolute worst customer service and it says a lot about how Whirlpool stands behind their products.

Weve owned a Whirlpool Gold Series Dishwasher for about seven years. There has not been a year that has passed that we have not had to place a service call with a local service provider. (Each service call costs $85.85.) The upper tray has come off the tracks more than 10 times. The drainage mechanism broke the first time we used the dishwasher. The fuse box (which is amazingly a self-contained, enclosed, black box) has blown twice, has to be completely replaced, and costs over $180. The second time it broke, I ordered, paid for, and had delivered the replacement part only to find out that the broken part suddenly started working again. (I guess Ill have the $180 part for the next time it breaks.) To suggest that this product is junk is an understatement. It will be replaced very shortly.

Weve had the 3 door model (side by side fridge with chilled water inside and full width deli drawer, freezer on bottom w/ Icemaker) for 13 months now with absolutely no problems. Chilled water inside frees up door for more storage.

In Feb. 2014 we moved into a new Condo and bought all new kitchen appliances, MAKING one mistake, a Whirlpool side by side refrigerator, Model WRS322FDAM 01. It had to be ordered and was received by Lowes on March 10th. Letters from Whirlpool told me that their service warranty had ended as of 2/1/15 which predated our receipt of the fridge. It is a bit noisy with the ice maker, and when it fills up with water, you can hear it, and yes, the ice does fly a bit when you put it into your glass.The worst thing about this piece of junk, is how cheaply it is made. The materials used must have come from the rejected pile of parts. Its just my husband and I, no grandchildren/children and very little company. So, the fridge received average use and then within 6 months, one of the drawers cracked at the back. I tried to glue it back together myself because I was told that it was not a covered item??? My repair lasted a few months and then came apart entirely. When I removed the broken shelf I noticed something around the LED light on the liner in the back of the fridge. I pulled out the meat drawer and found a crack that began at the bottom of the light and had moved about 3 inches to the left, and another one that began at the right of the light and that was about 4 inches or so.Life intervened and when I looked again, the right side crack had split and deepened and it had now crossed over to the rounded edging connecting the back liner to the side liner. The left side crack had also moved further to the left, and is now approaching the side corner. I spoke with Whirlpool and they sent out a repair company who e-mailed a photo of the cracks to them from our home. The company response was that they would cover the crack with 482395 liner tape. - this was their idea of a repair.I then spoke with a Lowes representative who agreed to send another repair firm out. Well, they came today and when they spoke with Whirlpool, they were told to order an Epoxy kit (# 8212572) - this was their version of a repair. I spoke with a supervisor and told her that they were not repairing the liner, they were just placing a bandage on top of the crack. I compared it to owning a new car but having cracks in the dashboard. In this case the dealer would place tapes over the cracks instead of just replacing the dash. Neither response from Whirlpool was a repair. All they were doing was hiding their piece of garbage. She disagreed and would offer nothing further. I told her that I was going to bring this to the attention of any consumer group that I could, and might even see if a class action suit could be brought to bear as there were many other reports of cracked liners. We are totally disgusted with the product and its manufacturer. Whirlpool used to have a good reputation, but after this, it is now at the bottom of the garbage barrel.

My daughter bought a mobile home manufactured by sunshine mobile home co. in Red Bay al. The home is only 6 mo. old. In that home there is a Whirlpool microwave oven model # WMH2175XVB-1 Serial # TRY 20 23398. After 2 months my daughter microwave stopped working, Whirlpool sent a repair man out to fix it. He didnt have the parts to repair it so he left to order some parts that he thought might be the problem. When the repairman returned two weeks later with the parts, he replaced a door switch. The oven started to work. About 4 days later it quit working again. The repairman returned for the third time, tried repairing the oven and was unable. I had to help him remove the oven so he could take it home with him so he could try to repair it. At that time I was so angry that the Whirlpool co. would send a repair man out three times to repair something that was obviously junk. When I talked to the people at Whirlpool they told me all they were authorized to do was repair it. I explained the repairman has tried three times and couldnt and that they in good faith replace the unit. The answer I received had to come from a mentally challenged person. If this is the response of Whirlpool about their product, then I want no part of them in the future.

I love my ceramic top. My only complaint is I wish my knobs were on the front of the stove because I am short. It would be nice to not have to reach over hot burners just to turn the temp up or down.

We ordered the Whirlpool 6.4 CuFt Electric Slide-in Range WEE745HOFS from Costco on 1/3/2017. It was delivered 2 weeks later. The FIRST time we turned on the oven the top heating element caught fire during the preheat and damaged the interior of the oven! The interior paint was completely burned off above the fire, exposing the raw metal. Costco called Whirlpool for us to ask for a replacement oven. Whirlpool refused. We called too. Whirlpool sent out a repairman who replaced the element and PAINTED the damage on the top of the interior.For weeks, every time we turned on the oven, the house filled with smokey paint fumes. I have a chronic lung disease (sarcoidosis) so the paint fumes were a serious problem. We stopped using the oven. Weve hardly used the oven since that time because we have a nice, large countertop oven. I turned on the Whirlpool oven again in January of 2018. The top element burned out AGAIN after less than a dozen uses! I was 2-3 days past the purchase date and again Costco tried to advocate for us but Whirlpool refused to help in any way.My next door neighbor purchased this exact oven two months before we did and she has had the SAME problems (and worse!) with NO help from Whirlpool! I have HATED this oven even though we mostly use the cooktop. A $1300 oven should NOT burn up an element in less than a dozen uses! The cooktop is very difficult to clean, scratches and stains easily. The trim and panel also scratch very easily. Yes, I did purchase the Whirlpool cleaning kit and follow all directions carefully. My next door neighbor says dont bother trying the Whirlpool Aqualift cleaning feature because it DOESNT WORK! She hates this oven too. By the way, ALL of my appliances are new Whirlpool appliances! So far the dishwasher is doing ok but the microwave is 4 months old and the door is not closing completely, so it has to be adjusted often or it clicks rather than cooking. VERY DISAPPOINTED IN WHIRLPOOL!

I have a Whirlpool top-loading washing machine model 3LA5580XSW3. The timer switch is not working and I have been told that spares are not available. Is this true? Everything else works well. Please advise as I really need a new timer.

We bought our Whirlpool Cabrio Platinum top-loading high efficiency machine Model #WTW8000BWG in Feb. 2015. It cleans well, and is easy to select water temp, spin speed, etc. It's simple to load, but because I am short, I have difficulty reaching stuff at the bottom of the tub. A stool is needed. LOL. In the 5 years that I have owned it, I have not needed any kind of service to be done on it. Very reliable. I have had Whirlpool washers and dryers before and my success with them is why I purchased the set I have now. And so far, so good. Highly recommend.

My son bought a Mastermind 250-L refrigerator on 09.09.2009 (invoice no. **) from the Good Morning store in Alleppey (phone no. 0477-23253809). The cooling effect was lost with a loud sound. I requested customer care. Three times, four people came and they gave a receipt of RS 890. After they left, it is in the same condition. I requested so many times, but there’s no reaction. Before I could go for legal proceedings, I would like to make you aware of the conditions prevailing in Kerala in sales and services. The young trainees who dont know to repair have broken down the entire system and it is fully collapsed. The franchise office washed their hands. This will spoil the entire name and fame of the company. Kindly look in to the matter and do the needful immediately.

I have a Whirlpool 33 inch wide Side by Side refrigerator. WRS311SDHM. This is the worst refrigerator I have ever had. Temperatures are inconsistent. It is less than a year old. Initially, I stored the big container of spring mix lettuce on the bottom shelf of the refrig as it wouldnt fit in the crisper draw. The temp setting in the refrigerator was set to ideal. Oddly though, in the freezer, ice cubes were melting and refreezing creating a massive frozen block. So, I raised the temperature in the refrigerator, but kept the freezer at coldest. However, I noticed that when I set the refrigerator to a warmer setting, ice cream became cold soup despite the coldest setting.I called Whirlpool and a service technician from Georges Appliance in New Providence, NJ came to my home (of course I had to take half a day off from work). He stuck a thermometer in the freezer and said, its working fine. While at my home he called Whirlpool who said that if lettuce isnt kept in the crisper drawer it will freeze (silly woman, dont you know that?) and ice cream will get soft in the freezer if the temp in the refridge is warmer than ideal. So, it seems I can have lettuce or ice cream, but not both. Okay, so I put the temp back to ideal, bought smaller packs of lettuce that would fit in the crisper draw and called it a day. Nope....lettuce and anything else in the crisper draw freezes too. Wilted, soggy lettuce is so nice in a salad and frozen baby carrots can break your teeth.I have been on the phone with Whirlpool executive dept several times. They offered to have another service company come out to look at the refrigerator. This repair company would not give me a 4 hr time frame until the day before the actual service call. This might be okay if you work from home or are retired, but this is not my case. I opted to not have them come. This is my last Whirlpool product. Since KitchenAid and Jenn Air are owned by Maytag/whirlpool, my other options are LG, Samsung, GE or Sub Zero.

Apparently, Whirlpool selling all their rejected faulty washing machine in the market. The trick they are playing is the machine being sold with one year parts-labor warranty; They wont replace these machines with a new one because they know that these machine will never work, consumer will buy the faulty machine, obviously it wont work so consumer will call for service. The service guy will say that “oh! Machine needs a part and then the customer service will say “the part is being ordered”, “wait”, then the service guy will come with the part and after wasting some time he will say “Oh! The machine needs another part, and again customer service will tell the consumer that “you keep calling us”. One year will be gone! Bottom line – faulty machine is sold, Whirlpool made profit, buyer is robbed. I am one unfortunate customer who purchased Whirlpool Washing Machine which never worked as it is a faulty machine which should not go to the market at all; Whirlpool made money on my hard-earned dollars and I been robbed.

We’ve had problems with our fridge where after we had it for about 2 months a crack formed on the inside, the repairman came and put a piece of tape, tape on a new fridge I wasn’t happy. Then we had our stove for about a month and the front right element went it was replaced but to this day it works when it wants to and I brought this to the repairmans attention when he came to replace an element in the oven and he didn’t even offer to take a look at it. We called Whirlpool on the 27th of December to get service on the oven and was told nobody could get here until the 2nd of January. This ruined New Years Eve Plans, New Years Day Plans and our turkey which should have taken a max 5 hours on Christmas Day took 11 hours putting our dinner off until 8:00 pm. We purchased the extended warranty ($700.00) to protect us from high bills for repair and this oven issue ended up costing us about $800.00 for meals out. I asked at the time of my call if there was some kind of rebate to cover our meals and the inconvenience over the holidays and they told me no, that’s pretty bad for such a huge company. Our dishwasher which is also Whirlpool hasn’t worked since day one, we had a repairman out and all he said was, run your hot water before you use it and use Cascade, it’s no longer under warranty and there’s pieces falling off and I have to wash my dishes before I put them through the dishwasher so what’s the use of having one. We purchased all Whirlpool because of the reputation but well never buy Whirlpool again or recommend them.

I bought top of the line stainless steel Whirlpool kitchen appliances two years ago. Warranty has expired. Microwave error message showed need to shut door and press start. Door was shut, opened and shut door 20-30 times for microwave to start. Had to buy new Microwave. Now dishwasher now will not drain. Refrigerator ice-maker dispenser is too small and ice keeps getting stuck in dispenser. I am done with Whirlpool.

My Whirlpool Microwave models WMH32519FS was installed in my new home by the KB Home builder Nov 2017 and went bad on Nov 23, 2018. As write this, my microwave is 1 year & 15 days old. Just out of warranty. The micro Keep show the same issue, open the door & closed the door. Still is not working, the microwave died On Black Friday 2018. RIP Whirlpool, I will never buy you.

I purchased the front load washer 4 years ago and the board went bad in 2 years. It costs more to fix it than the washer is worth. Stupidly, I purchased the top loading Cabrio and it has gone downhill from there. Has always sounded like a jet taking off in the spin cycle. Then 18 months into the purchase, it started with grinding noises and load balance issues on the spin cycle. Seems like they have a lot of issues with these Cabrios. Spent a lot of money for nothing. I will never buy a Whirlpool again!!!

On August 16, 2016 I received delivery of an Whirlpool under counter refrigerator that I ordered online from Home Depot. Model # WUR50X24EM. Five months later, on January 10, 2017, it stopped working, I called Whirlpool for repair. They referred me to their service company, I called the service company the same day. They had a repairman out on the following Tuesday, 1/17/17. The repairman said that he will need to contact Whirlpool to order a part. Whirlpool sent him the wrong part. After numerous phone calls no one from Whirlpool could figure out the correct part number. The repairman kept sending over pictures and information on the correct part, but this all went nowhere with Whirlpool.On 2/7/17, I called and started yelling. I had been very patient up to this point. I was finally offered by Whirlpool a parts research to determine exactly which part was needed. Plus a $50 Visa card to appease me. At this point, its been four weeks without a refrigerator and no one from Whirlpool has put any effort towards trying to figure out the correct part. On 2/16/17, I called Whirlpool again to find out if they had found the correct part. They told me that the new part had been sent to the service company and Whirlpool scheduled me an appointment right then for Monday, 2/20/17.So today is 2/20/17, the repairman came and went, Whirlpool once again failed, they lied because the repairman came out with the wrong part that was originally sent to him when he ordered the part back on 1/17/17. I called Whirlpool and asked for a manager. They connected me with the Resolution Specialist. I told her everything and pointed out that it has been six weeks without a refrigerator. She said she will take care of it and get the right part ordered. I asked her how long I should have to wait, cause at this point I have waited long enough. She said she will have an answer by the end of this week. I dont believe her, I feel as though Whirlpool is pacifying me. I dont understand why they cant order the correct part.I have no faith in Whirlpool that they will do the right thing or have any understanding on how inconvenienced they have made me. I have no faith to the point that I ordered another refrigerator from a different manufacturer. It will be here tomorrow between 8am-12pm. Oh, and Home Depot, they washed their hands of this a long time ago. And, I have yet to see the $50 Visa Card.

We bought a Whirlpool Cabrio washing machine a year and a half ago. It started making loud noises over time and finally stopped. Whirlpool did advise us that it was out of warranty but suggested they send a factory repairperson out. They told us depending on the problem they might pay the bill. It turned out that a nut holding the pulley had not been tightened up properly at the factory and had no restraining device, so it simply rattled off over time. Since we dont use the machine that much, the problem went past the 1-year warranty. It cost us two hundred and fourteen dollars for repairs. I could have put the nut back on myself for free. The service guy also said they had multiple similar problems and I should contact Whirlpool and they would probably work with me. No chance. They only kept repeating that it was out of warranty. I even talked with a supervisor who said the same thing. I asked to appeal further and she refused to give me anyone else I could contact. I asked for their legal department information, and she said she did not have that and I would have to get that through my attorney. What a joke. No more Whirlpool for me.

I purchased a Whirlpool® 4.5 cu. ft. Front Load Washer with Load & Go Dispenser in 2017. By August of 2020 the washing machine was no longer working. The machine would continue to fill with water and not shut off. The machine would then give an error of E01 and F03 and drain all water within 5 minutes of the wash load starting. I had a certified Whirlpool technician come and diagnose the problem for $99. The technician said these error codes happen ALL THE TIME on Whirlpool washers. The technician tried to replace the water pressure switch with no success. He then spoke to a corporate office and was told we would have to replace the motherboard for over $500. The total cost for the diagnosis and repair was almost the exact price I paid for a new washer just 3 years earlier. I will NEVER purchase any Whirlpool appliance ever again.

I purchased a front loader Whirlpool Cabrio washer/dryer in June of 2011. I was sold an extended warranty which ends June 30 of this year. I have made 4 calls to the Co which warranties the washer because it is making squeaking noises on the spin cycle. I was refused service because the customer service rep didnt “hear” anything. I finally had a local service Co check out the machine and was told the motor needs to be replaced and if under warranty I should demand it be replaced. I called again and still cannot get NSI to come out and see the problem.

After happily using Maytag washers at my old address for 30 some years, I moved to my current address and in 2006 I purchased a new Maytag. In 2010 I needed service. I was advised it had a bad bearing and was not advised to repair as it would cost well over $600.00. I purchased a Whirlpool Cabrio top loading HE appliance.The Cabrio worked well until one day it made a horrible noise. Although it still worked, I called for service and was told it had a bad bearing and would cost $670.00 to fix and they advised against it. After the service call, it never worked again. I know things dont last like they used to but 4 years is ridiculous. I have been advised that Whirlpool bought Maytag. Is this what to expect from so called reputable companies?

I have had my Whirlpool stove for over 30 years and use it daily. Still a great stove. I would not trade this stove or any of the new types. I just need to get the self cleaner repaired. The only problem I have is finding parts to fit this older stove.

I bought a Whirlpool 5-burner gas range with double oven at a cost of $1700. Almost immediately, the finish above the oven started cracking and now is starting to chip off. When I contacted them, they stated cosmetics were only good for 30 days. We had just moved and were getting settled so we didnt use the range much for the first 30 days. I am very unhappy with this product and also unhappy with Sears for their lack of effort.

I bought this to provide A/C to our bedroom during a power outage by use of our Gasoline generator. It is very quiet and provide a very cool air flow. The double vent pipes make it efficient and more than capable of cooling out 15 X 25 foor bedroom. Whirlpool has 28,000 employees in the USA.

We bought model # WTW5000DW2 Whirlpool top loader. The sensor for water level continually bangs until the water reaches its required level!! Very annoying! I like that it doesn’t have an agitator but that’s it. I’d rather be able to pick my own water level. It also is a very slow process!! I would not recommend this machine unless it is going into a sound proof room.

Needed a washer right away and have had Whirlpool before. Simple & easy to use. Not confusing to the average person or teenager for that matter. Reliability from Whirlpool is excellent. I have had many products from them and have enjoyed them all. They have been quite reliable over the last 9 years. They are out of date but they work. Not a lot of bells and whistles but still nice. They are both full size and have enough options for me. I am still happy with the pair and would purchase again if needed in the future. Price was good at the time as I cannot see spending $1K on them. Not always the more expensive is a good idea either.

My Whirlpool Cabro washer does not get clothes clean. When I contacted the manufacturer, I was told that it is water saving. What kind of water-saving is it if it does not clean my clothes. I would think cleaning clothes require water. If this feature renders the product ineffective, this product should not be in the market.

Front-loading does not do good job of rinsing. The Whirlpool Duet will not last longer than 2 years. Whirlpool recommends that owners purchase a new washer every 2 years. Whirlpool suggests owners purchase new clothes each week to avoid washing. Any owner would be required to quit their job in order to wash clothes. The Whirlpool Duet front-loader requires 12 hours per load. This means that only 2 loads can be washed in a 24-hour period. Each load requires 10 rinse cycles to remove suds.

Cabrio Washer WTW660SW2 - For 2 years I have been getting f1. When I talked to Whirlpool they said they were not aware of this problem. Now I have to pay to fix it. Looked online thousands are having the same problem.

I love my washer and dryer but am a little disappointed in a few areas. First, my washer stopped spinning normally after a few years, I forget exactly why. Then my clothes were too wet when it was done. My dryer then did not get my clothes dry in one cycle. Also, it was going to cost $500 to fix my washer which wasnt worth it. But Whirlpool did send us a new tub and all the parts for free. Thankfully my husband is handy and after finding a YouTube video, replaced it all and now it works again. My dryer still doesnt always dry everything all the way. I often have to do 2-3 cycles in the dryer to get my clothes dry. I thought there was supposed to be a sensor that would keep the dryer going until there was no more moisture. Maybe that is broken too.

Since buying a Whirlpool Cabrio washer about 3 years ago have had several breakdowns. Within 6 months the computer completely failed. Since then it failed again. About every six months it costs me around $125 to get it running. The thing is a piece of junk. If the load is slightly unbalanced it just shuts down during the spin cycle. The old Maytag we had ran for over 25 years with the belt replaced once. No other problems. Will not buy another Whirlpool again.

Just bought two new Whirlpool water heaters, $469 each. Not impressed. One of the MANY issues: water leaking from the top. Reason: before installing, if you look inside female threads, you may see a rubber gasket (heat loss valve). One of the two heaters of mine was missing one. This showed me what the quality of the joint was like under the gasket. I temporarily removed the other three (two heaters) to confirm what I saw: At the backside of the threads there should be a clean flat landing from which to the male nipple should tighten against (washer in-between). Instead, there is a disaster of a flimsey lip (washer-like) which is torn up and not anything close to flush. Bad Whirlpool! Bad quality control!