DO NOT BUY THIS DISHWASHER (Whirlpool Gold Series dishwasher)!!! We bought a camp with this dishwasher in it brand new. It has been serviced three times in the past year because the dishes (especially utensils) do not dry. The service company first said it was because I needed to use jet dry. What a joke! I told them I was using jet dry so they sent a service man out. He had to read a manual in order to try and figure out what was wrong with it. He then decided the entire motherboard needed replacing and he would order the part. He came back, replaced the part and it still did not fix the problem.I called again to complain so they sent another service man out and he said the drying air vent may not be working. They came back out to replace it weeks later because the part was on back order. Wonder Why??? I still have to dry the utensils every time I run the dishwasher. The interior walls of the dishwasher are wet even after running through the drying cycle. Either this dishwasher is a lemon or Whirlpool is selling a dishwasher that does not dry to the consumers!!! So BEWARE!!!

We remodeled our house 5 years ago, and bought all new GE/Whirlpool appliances (washer, dryer, microwave, refrigerator, oven, stove top, and water heater), and weve just passed the 5 year mark, and each appliance is failing one by one.

Bought expensive fridge 2009. Now (2015) random very loud rat-tat-tat sounds lasting 5-10 seconds. Very loud. Paid for repairman to evaluate. He said it was probably compressor spring and other springs would probably soon break and would shut down fridge. Said it is very expensive to repair and it would be best to dump the fridge and buy a new one. I called the 800 number located inside the fridge. Jacob at Whirlpool listened to my story and said, Yep, it sounds like the compressor spring and the other springs will likely break. He said he can make me a one-time offer of a full repair of the compressor for only $359.65. We pay Whirlpool and they will have a local guy here come and fix it. We paid by visa.And, via email we get a document that shows we just bought a service contract. This is a surprise to us as we were told were paying to have the compressor repaired. In a few days, a call comes from local repair shop. Guy says, he will come out and check out the noise and see if he can repair our unit. We tell him the noise is intermittent and we cant predict when the noise will occur. We also tell him Jacob from Whirlpool said it was the compressor and that we paid to have it repaired. He says it doesnt sound like it is the compressor and that he cant diagnose the problem if he cant hear the noise. We tell Maytag/Whirlpool via phone we are faxing formal request for refund of our $359.65. Lady from Whirlpool says we, should get a refund in 4-6 weeks. Well, we will see.We are very disappointed in the the short life of our very expensive fridge and we are disgusted with the false and misleading comments made by Jacob of Whirlpool. He told us we were paying for the repair of our compressor and instead we get a stupid service contract. We are in the process of buying a new fridge. And no... It will NOT be a Maytag/Whirlpool!

After reading all reviews online on the lid of the Whirlpool Cabrio Washer, it upsets me that there has not been a recall on this. Our lid has snapped & has to be held down until the lock light comes on. Often times during the cycle it must sense the lid is broken & thinks it is not locked & sets the load off line. I have to pause the load & then reset the load & hold the lid down tight until it restarts.

The only reason I am giving it one star is because it looks good in my kitchen. This dishwasher does not clean the dishes. I’ve had it serviced twice, both having to wait for parts, I am very disappointed. Having to run the dishwasher two times to find myself hand washing... Is annoying. Dissatisfied. I don’t put certain dishes in and run very scant loads. Family of six is not happy!

Horrible Customer Experience. After having my Whirlpool side by side with bottom freezer for 5 months it quit cooling (both freezer and refrig portions). This happened on a Saturday evening and Whirlpool was closed until Monday (no emergency service shown on their website for my area). Whirlpool contacted their service agent and they could not come out until Wednesday. Service tech said compressor was bad and had to order new one. Compressor arrived the next day however they could not come back until the following Monday to install. By this time I was without a refrigerator for 9 days. Techs installed new compressor and by Tuesday it quit cooling again! Tech came out the next day and said he thought the problem was the compressor and now says its the evaporator. I had to wait until the next week before they would come and install the new evap. By that time I will be without a refrig/freezer for 16 days. I contacted Whirlpool customer service and talked to several different people and all they would offer me is $50. I will never purchase a Whirlpool product again!

I purchased my stove in June 2020. I had no idea it was to be connected to the internet, but no big deal. Had I known of all the other quirks I would have thought twice. 1: A red light comes on to tell you a burner is on but not which one. 2: A red light appears when a burner is hot but it doesnt show which one. 3: Only 3 burners out of 5 can be used for cooking the other 2 are warming and melting ONLY. 4: The stove updates its software whenever it feels like it and shuts off the oven and burners. 5: Periodically I have the oven on and it just turns itself off!6: The touch controls for the oven are in a bad spot because if you accidentally touch them when the oven is on the oven will shut off.Not sure if it has any serious problems just the inconveniences listed.

Whirlpool Model WDT920SADM0 Dishwasher. We built a new modular home so Abraham Builders ordered all my kitchen appliances in 2014. We did not move in and start using the appliances until June, 2016. Here is what happened during the first 6 months: 1) Would not dissolve dry soap or packets as there were still particles and plastic in the dispenser. 2) Dishes were not getting clean and were spotty. 3) Would not dry dishes, ever!!! 4) Parts would keep popping off as we would find them on the bottom or hanging down. 5) Final straw was this morning around 4 a.m. (12/4/16)... woke up to the smell of wire burning in the house and discovered it was coming from the dishwasher that we had put on delay wash that night and when we opened the door, smoke came out from inside!!Since it was past purchase warranty date, we had no warranty and the builder would not return any of my calls on any problems and the manufacturer of my house closed the factory. Needless to say, we now have to spend another $900+ for another dishwasher! Not happy at all about this Whirlpool model and would not recommend it.

I bought a whirlpool cabrio with high hopes. Unfortunately, it has been the worst washing machine I have ever had. Then I moved in with my fiance and he too had a cabrio. It too is a piece of junk - and brand new! Every load comes out with left over residue and the clothes look worse than before they went in! I have tried everything and I do mean everything! IM 41 y.o. - IM well aware of how to load a machine. I load it just the way the instructions say: as if there was an agitator there. Ive tried using no laundry detergent or fabric softener - clothes still come out disgusting. Ive made sure the screens are clean, doing extra small loads, turning on the extra rinse, everything! Ive called whirlpool, but there is no such thing as customer service anymore. They just blamed me for not loading the clothes properly and blew me off. The machine becomes unbalanced very easily (it is leveled on the floor), sometimes the clothes are still soaking wet at the end of the cycle and sometimes all knotted up. This is a horrible machine!! I wish I could say it makes me feel better that IM, by far, not the only one having issues with this piece of junk!

Atlanta Gas Light Company showed up at my door Saturday Jan 16, 2016 citing they needed to do maintenance on our meter. 20 minutes later, he came in and said we had a leak. He checked all of the furnaces and water heater, then zeroed in on my brand new Whirlpool Range (purchased 11/11/15) indicating it had a faulty control valve. This faulty and dangerous range was sold to me by Lowes and manufactured by Whirlpool and we had unknowingly been living with a gas leak for 2 1/2 months! Its notable that Atlanta Gas Light sends our contractors only every 3 years to test for gas leaks. I shudder to think what would have happened had they not done this. Ill never buy another Whirlpool anything. Model Number: WFG320M0BB0.

Bought Cabrio 3 years ago, started getting ul code and f1 code. We leveled machine, but cycle kept getting stuck mid-cycle. Called repair guy, they say it is going to cost between 6 to 800.00 to fix???? Really. Its three bloody years old. Very disappointed. Do I now get it fixed or break down and buy another washer. I would not buy Whirlpool again. Very pissed.UPDATED ON 02/05/2015: We called an appliance repair company and initially paid $440.00. After installing a motherboard computer system, it still did not work. We were then told that the other part would be another $120.00. We were already soaked for $440.00 so we decided to pay. After that was repaired the washing machine was still stalling mid cycle. We were then told that it has something to do with the wiring and it would cost another $120.00-$140.00. Needless to say, we declined. Complained to whirlpool that machine was three years old. We are pissed and $570.00 out of pocket. Just bought a lg front loader and paid for a 5 year warranty!!

Im guessing the company that makes Whirlpool appliances no longer make dependable appliances… bought home 2 yrs. ago. Bought Whirlpool over stove microwave and expensive side by side fridge. After 1 yr. microwave stopped heating. Now my fridge is no longer cooling. Have cleaned it underneath, did all a normal person would do. I replaced my microwave last year with a Maytag. I’m sure I will have to replace the fridge very soon. My stove is a Maytag. Dishwasher a Frigidaire... have had no problem. Just the Whirlpools… Will never buy another Whirlpool. Not just me, my niece bought a microwave. Her stopped heating after one year.

Bought the washer from HH Gregg for over $560 12/2012. Turned on power 4/2014 and just heard clicking noises then nothing. Had to get technician. Paid for $75 service charge and waiting for cost of labor and part for the lid lock/latch assembly. I see a lot of complaints with this new machine. I bought a new one BECAUSE I did not want any problems with repairs. Whirlpool is ripping off the consumer passing out this piece of discombobulated metal, wires and electronics. An appliance like this should last AT LEAST 7 years without a problem. I wish there was a class action lawsuit and will be waiting to the day it surely comes.

We have our stove for over five years and we have had no problems with it over the years. It has a black top and this seems like it is a little harder to clean, but other from that we have had no problems with either stove or oven.

Machine just will not clean clothes. Model Cabrio W10560169A. Company offered NO support. This washer retails for around $1,000 and just does not work!

Purchased double range ovens. Enamel is flaking off within 2 years. Whirlpool denies defect. They wont replace it. Any other folks with similar problems? What can I do to have it replaced? I remember the old ovens and how the enamel just stayed and stayed and stayed. Never a rust or flaking issue in those old time models. Any expertise on how the enameling process may be compromised in the newer manufacturing process (cutting corners or costs). Any options for a class action here if a commonly experienced occurrence? If similar experience drops comments/review below as a one liner - just state enamel defect. That way can figure out the number of folks with issues. Id like to take action if given the opportunity, and more so if this is a common occurrence. Lawyers are costly for one-off complaints, but there is power in numbers (think United Airlines).

We bought a new Whirlpool Cabrio Platinum washer and dryer in July of 2014. We were continually finding wet areas in our clothes after they were supposed to be dry. We finally called Lowes where we purchased the set. We had bought Whirlpool appliances about 10 years ago and were pleased with the product as we never had any problems. Lowes sent a service technician on September 12th who checked out the dryer and told us there was nothing wrong with the dryer, but the vent was unsatisfactory (he was from A&E Appliance Repair). He said there was nothing he could do and charged us around $148 for the 14 minutes he was here. We checked out the vent and found it to be working satisfactorily, but we continued finding wet areas on the clothes that were supposed to be dry. We continued to call Lowes and finally spoke to Amy at their Headquarters Customer Care Dept. with no positive results. We then called Whirlpool, and they sent someone who replaced the steam dryer valve which he said was leaking in November (it took another month to get this part). It is now January of 2015, and we are still experiencing wet spots on our clothes even worse than before!

I purchased a washing machine FS65 on 10-30-2005. In Oct. 2009, my washing machine developed some fault so I contacted the Whirlpool service center and got it repaired. Again in Dec. 2010, the appliance became faulty and so I contacted the service engineer to attend to the machine. He repaired it and I paid 2500/-. But the very next day, my appliance showed the faults again. It was rectified with replacement of PCB and I was charged 2786/- on 01-20-2011. Again on 09-04-2011, the machine became defective. On the call to service center on 09-05-2011 and attended by engineer on 09-06-2011, I was informed that PCB is defective. I failed to understand that the PCB replaced in January was of what quality that it has to be replaced now after such a short span of time. I feel that this is clear cheating with me.

Smelled strange odor in laundry room area.. Noticed plastic panel to Whirlpool electric water heater controls was melting and immediately closed breaker to the heater.. After inspection of heater control panel, noticed all wiring damaged and burnt causing burning smell.

Its a piece of junk. The only time it will finish a wash and spin dry is when it is empty. Otherwise, it stops and lists an unbalanced error code. I opened up the service panels and found no broken hangers or clothes. There’s no way to bypass the system. I have read of similar issues and of course, its just out of warranty. I assumed the warranty was like other brands but it’s much shorter. What to do? Purchase a washer with dials and not a brain; it will last years. Note that the models without a brain cost far less.

Let me just start by saying I have multiple Whirlpool appliances, and I have always bought Whirlpool appliances in the past. I bought a refrigerator 3 months ago, and it quit working. So, I called Whirlpool to come service it. The service repairman said someone left the freezer door open and it froze up. Two days later, I had to call them back again, because now, the fridge part was not keeping food cold. He came back out and told me it was the compressor. I then in return called Whirlpool that afternoon, and they refused to replace it saying they had to follow their Warranty Policy and they would call me back on Wednesday. They did call back on Wednesday and told me they had located the part. I got a call on Tuesday of the following week and was informed they could not locate the part. I called Whirlpool the next day, and they told me they would have to send it to their Exchange department for review and I would hear back from them in 3 business days. I asked for them to rush my request, but they told they have no way of doing that. I will never buy a Whirlpool product again!

We purchased this combo from Lowes; checked my account and saw we were double charged! Got the charge adjusted; jeez. Bought this size to do comforters and large loads, but nothing large gets completely wet. Our clothes started to mildew as Affresh does not work. Im allergic to mildew and got headaches. The mechanic said this mildew is because all the action is under the basin and you dont want to see how black it is under there. It began to leak as buildup went into the bleach dispenser, and it turned black.He said to run a gallon of white vinegar in the clean cycle once a month, and this did work. I did a clean out with Castile peppermint soap, several white vinegar treatments, and got rid of the mildew and the (clog related) leak. I now use Mollys Suds powder. I was shocked to read on the Mollys site that mfg does not have to list all the terrible ingredients in commercial detergent, which is not helping you or the machine.

A disaster from start to finish. I would give it zero stars if possible. Purchased from Home Depot online in September, 2020. The first delivery was scheduled for October 11, 2020 at 7am on a Sunday. I spent hours on the phone trying to get the time changed. I was assured it would take place later. That didnt happen. The delivery service Temco called at 6:30a and refused to come back later. I had to make a new appointment. A week later they delivered the dishwasher, left it on the porch, refused to uncrate it or bring it inside the house, refused to haul away the old machine and stole the Dishwasher parts kit that I had paid for which delayed installing the dishwasher. After the machine was installed I discovered the machine did not come with a manual. I was told I had to download and print the manual.When I complained that I should not have to use my paper and ink to print a users manual after paying $800 for a dishwasher. I was promised a check to offset my costs. I was supposed to get a credit for my inconvenience but that never happened either. The first time I ran the machine using the one hour cycle water was all over the machine and I had to dry inside. I was told that I had to use a longer wash cycle so I did the second time. After 4 hours of washing, the glasses had a film on them, even though I rinse the dishes before putting them in the machine the dishes had some debris on them and water had still collected on the top of the glasses.Whirlpool sent a repair company out and the technician said motor pump and display control were faulty and it would probably be cheaper to replace the dishwasher rather than repair it. I was told I would get an email the next day telling me what would happen. I never got the email. During the week I called Whirlpool and Home Depot many times to complain about the faulty dishwasher, stolen parts and the promised refunds for my inconvenience as well as having to print the manual. Calling Whirlpool or Home Depot customer care will take hours and gets you nowhere. A week after the repair person came out I called the repair company to request a report as to what had been done and was told that they were coming back out the following Monday to fix the machine again. Monday, The repair technician came out and replaced the control panel but not the pump. The machine wont heat up to dry the dishes--the heating coil wasnt even warm after being on for 8 min. I am supposed to be contacted again for a 3rd visit!! I have a dishwasher that is faulty (read lemon) and Home Depot wont allow me to return it because their return policy is 48 hours after delivery. Whirlpool refuses to replace it unless the technician says it cant be fixed. Obviously, that will never happen. I should have repaired my old dishwasher rather than waste my money on this horrible machine. Whirlpool used to make fine products but those days are over. How does running a dishwasher for four hours saving energy? My old over 10 year old Whirlpool dishwasher was perfect until the pump broke. The dishes were always clean, dry and came out of the machine hot and sanitized. I am so disappointed in both Whirlpool and Home Depot.

I bought this washer (Whirlpool Cabrio) about 4 years ago. A year or so later, it started leaking; based on reading the troubleshooting guide we found that this was because the feet would continually get out of balance. After painstakingly re-leveling the washer every 6 months or so the washer now consistently leaks - even though its balanced/level! $508 to repair a machine I paid $787 for. No thanks. I agree too with the other reports that it doesnt get clothes clean. I just figured this was a feature those of us got for trying to be energy efficient.

I bought 2 Cabrio washing machines for my two homes along with the matching dryers. They worked for about 3 months, then the washers displayed OL Error during any wash cycle. I tried to contact manufacturer and have not been able to get service without charge. After reading the many posts I am not sure if I should dump both or start investing $$$ in service calls.

Bought this brand new 5 door fridge, not even 2 years ago and had nothing but problems. Computer went 2 times. Rail broke for the drawer in freezer. Freezing up in freezer. Switch on freezer drawer went out. I will never buy anything else from Whirlpool again. So much for the nice looking things.

I purchased the top-of-the-line Whirlpool Cabrio washer and dryer. My washer is 6 years old and will not complete a wash cycle. According to the repairman, the drive shaft is stuck and it will cost $500.00 to repair it. When speaking with Whirlpool, their suggestion was to buy a new one and get an extended warranty. This company is a total disappointment.

In May of 2010, my husband and I purchased a Cabrio washing machine. By the fall of 2010, I had put in a call to Whirlpool due to the washing machine chewing holes into clothing and not cleaning the clothes. Some of the clothes would come out of the washing machine with dry spots on them. Whirlpool sent out two different servicemen and even though one of them replaced the agitator we have still had problems with it. One of the servicemen even tried to tell me it wasnt the machine but it was my detergent (I use HE Purex dye free). I was told by a service rep at Whirlpool that there was nothing more they could do and I would just have to deal with it. I understand that products go faulty but with good customer service these issues could be resolved. Whirlpool obviously has little regard for their customers. I have contacted the Better Business Bureau. Hopefully they can get results.

I thank the folks at Whirlpool for building a washer (Cabrio tub bearing failure) that lasted 22 days just shy of four years, better than the Whirlpool Duet that lasted 14 months, tub bearing failure also. Now I have high confidence that Whirlpool pre-engineers failure into every washer they build.

I purchased the GBS309PVS single oven in Dec. 09 along with a Whirlpool Gold microwave, dishwasher, and stove top. The oven was dented and scratched, so another one was delivered on 1/10/10. I finally decided to use the cleaning cycle in Oct. 10. It burned out the circuit board and something else. It was under warranty and repaired. I was afraid to use it again, but tried it yesterday, 12/27/2011. It smelled horrible, knocked the power out of the oven, and the door will not unlock. Customer service was not very kind and said that I had to purchase a $269 warranty and they would send someone out. I did, unwillingly. Well see what happens on Friday. If this is not resolved, I will go further. This is a faulty part of the manufacturing and should be handled as so.

We purchased the Cabrio washer & dryer with 6th Sense technology in 6/2007. What a mistake it has been. We have had 3 F1 error codes that a repairman has had to come fix all about a year and half apart. It makes crazy loud sounds if it decides to actually spin in the final spin cycle. It normally does not spin. It just always flashes UL for unbalanced load. We are extremely dissatisfied with this set. The dryer heating element has gone out also. We just purchased a new part. Prior to this, we had a hand me down washer & dryer that worked excellent. We regret getting rid of them, and now need to purchase a new washer & dryer. Whirlpool ought to stand behind its products and get this fixed.

On November 22, 2013 I loaded my Whirlpool Quiet Partner III dishwasher and set it to start. About a minute later I heard an odd noise coming from the machine. I went over to take a look and saw black smoke and flames coming from the little vent area at the lower right corner of the control panel. I opened the door to stop the machine but the washer kept going throwing water all over the floor. I shut the door and ran and turned off the breaker and then unplugged the cord from under the sink. Two different repair service companies said they would be hesitant to try and repair it due to possible unseen damages. I was lucky that I was home when it happened. I could have lost my house to a fire. There is a large consumer lawsuit already in play regarding this very thing.

If I could give them zero stars I would. NEVER BUY A WHIRLPOOL GAS WATER HEATER! Our Whirlpool water heater Is 4 years old. Pilot light wont stay lit. A reputable plumber came out and said that the control knob is bad and to call Whirlpool to get part because its still under warranty. So I call and get nothing but a hassle. They tried to tell me that it was installed in a room that the installation manual says it not to be in. (Background here. The house was built in 1960. It is on a cement slab and its a prefab house.) The manual says Do not install in bathrooms, bedrooms or any OCCUPIED room normally kept closed. Now let me tell you where it is at. It is in a 5 by 3 boxed area with cement floor and walls to the ceiling with access doors to it and to the furnace which is also in this area. The access door to water heater is on the back side of a bedroom closet, access door to furnace is in a hall. So Whirlpool tells me that they cant give me the part Even if I pay for it due to some national fuel and gas code. They wont even tell me where I could buy the part... They said the only way they can help me is if I relocate the water heater or put in a ventless water heater. Our water heater is vented thru the roof of house... It gets plenty of ventilation. They wouldnt let me talk to a supervisor to complain... So this is why I am on here writing this review. I might add this is not our first issue with Whirlpool. Had a brand new KitchenAid refrigerator with ice maker. The ice maker didnt work from first day. After 3 techs and 3 visits it still doesnt work. Then also the compressor went out. If you want a better product and want good customer service then dont buy Whirlpool.Oh and one more thing. Our plumber also doesnt like Whirlpool. He said he had problems every time when he has to deal with them. He said its to the point when someone calls for services and tells him its a Whirlpool he just cringes. Now thats pretty bad. I just spent 4 almost 5 hours of my morning upset to the point of tears. With no results. Another note. I called my gas company. They said our water heater is in a safe place. If it wasnt they wouldnt be supplying gas to us. Live and learn. Done with Whirlpool.

We purchased a new Cabrio top loading washer in June of 2011 to replace a Maytag Neptune (thinking at the time that wed gone as low as possible). We didnt abuse the machine. In fact, because it had a tempered glass lid (in a plastic frame), we were careful with the lid on the machine. It broke during a wash cycle. Because its heavy, the lid has spring supports on both sides; these are stronger than the plastic frame and over time the frame will break, rendering the machine inoperable. The discounted price for a new lid is over $200, and Maytag (I mean Whirlpool) tells us that it lasted through the 365 day warranty, so the bill is on us. It may be green when it works, but taking 18 month appliances to the landfill is not very green. And others on the web report say that the lid only lasts a year or so. The ratings scale needs to have negative values. Id give this appliance a -5.

It is a top of the line washing machine. I have had it for almost four years. It is the best washing machine I have ever had. I have really enjoyed it, because; I am able to wash my comforters in this washing machine.

We bought the dishwasher because ours was not a very good quality, and it was a Whirlpool and was larger than our old one. But the arrangement of the bottom shelf doesnt allow for effective placement of larger items. If you wash any large items it doesnt wash the top shelf dishes.

I am so disappointed, angry and tired! Unfortunately, I listened to the salesperson regarding this feature and bought it hook, line and sinker! The Aqualift self clean system is a joke! It only cleans the bottom of the oven and that is after you mop up the water left in the bottom and scrub it. No amount of scrubbing even touches the sides, back or window, even after using the Aqualift feature 3 times! I spent hundreds of dollars only to be down on my hands and knees scrubbing to no avail. I have not seen 1 good review regarding this system. Shame on me for believing a salesperson and shame on me for not researching first. I will not make this mistake again!

I purchased a Whirlpool duet, model #wfw9550ww00, two years ago with added warranty. The machine stops mid-cycle. The time remaining flashes but no error code. Pressing start would begin the machine again. Sometimes, we could go several loads with no problems and other times it will stop three or four times in one load. Occasionally, pressing start would not work and the machine would require unplugging and restarting. We have had several service calls in. They have said it was the pump, then it was the motor, then it was the pressure switch, and yet the problem persists. They are due to come out again tomorrow for yet another examination to determine its cause. Its the third time in one month. Its a lemon.

I just love the durability of my machine and the features that it offers. It does a great job washing my clothes and I feel like its a solid appliance that lasts for many years and its good quality for the price.

Purchased a Whirlpool refrigerator the last week of January 2014 with promised delivery date of February 6, 2015. Received call Feb. 2 that the earliest they could deliver would be February 13th. Received call Feb. 3 that the earliest they could deliver would be February 19, almost 2 months after purchase of refrigerator. Sears, where we purchased the refrigerator, told me that they have been dealing with this for 10 years with Whirlpool. Why would Sears sell products to their customers with this kind of delivery problem? They only communicate with Whirlpool via email, so there is no resolution with a person to get issue taken care of. We will never buy a Whirlpool product again & will never buy anything from Sears again.

My dishwasher is really a simple basic dishwasher. It is efficient and does a good job of cleaning. You can put many items in the top and bottom and the utensil basket can be moved for better cleaning or more room. If I had one complaint that would be that it is a bit too loud but other than that it is wonderful.

Good microwave and will have 1100 watts Of use for TV dinners and warm up food. Do well and goes well. Please use this as well to warm up TV dinners smaller than most. Test them and see what is best. Go.

Bought this set for its basic functions. We dont need a lot of bells and whistles. The washer is rated as a water saver but it seems to use more water than our 10-year-old model. The only issue we had was with the electronics. Even though it has few features, it one day decided to not function at all. A call to support recommended just unplugging it for a few minutes so it could reset itself. For once this seemingly crazy idea worked and the unit has been normal ever since. I recommend buying from the outlet store as a scratch and dent. This saves lots of money and if the unit is not on display, who cares about the minor dent.

Bought at Lowes. Washer was horribly out of balance on first use. Called warranty # to get service. Was made appointment by Whirlpool for next day. Too good to be true I thought and I was right. A week later, repair company called to make their own appt, chuckled and said Whirlpool does NOT make appointments for them. They came out to see washer and at the time of appointment, the guy said sometimes they come from the factory not hooked up right inside and after he went back to a lady in the office, Jonnys Appl Repair, Bozeman, MT said they would not fix it because washer was not sitting on a concrete floor. They are idiots. Finally, washer completely broke 7 months later. There was no service that would honor ANY appointment Whirlpool made. Went through 6 repair companies trying to get a close appointment date. Hopefully next week will be the magic repair. GO WITH SEARS. Repair is directly through them and they show up when they say they will. Ive never had a new product not working right when purchased at Sears.

Purchased a new Twin Thin washer & dryer combo when I first moved into my new apartment two-years ago since it was a good fit for the space that lies inside my patio. Nothing BUT problems from day one since it DESTROYS/EATS your delicate clothing. Repairmen in and out could find nothing wrong with it. The problem lies in the fact that the so-called gentle cycle agitates at the same rate as the other cycles, but stops so that the agitation time is shorter, but at the same time the agitation no matter if its shorter is still too vigorous for delicates. Under contract, so keep having repairmen come at no cost to me other than a complete waste of money purchase inclusive of unwearable brand new RUINED clothing.Called the company the other day & was told they could SELL me a different one, but they would probably not pay to have the LEMON removed. Also, suggested I wash my delicates in a mesh bag which is impossible to do when one has maxi dresses that tell you to wash on the delicate cycle. Mesh bags are made for small items - DUH!Repairman came again today, and was kind enough to make call to them. Later found that their response to him was that I was putting too much into the washer. Like no way, Jose! Asked tech to forward e-mail to them advising that they were more than welcome to come film me when I wash because that was NOT the problem with it. Already knew Whirlpool had discontinued this washer/dryer combo, but THAT fact was never mentioned. A lot of sites online no longer even carry the parts for it. Found others with the same issues on various sites relating to this now discontinued model which is akin to a Purana fish with shark fins. E-mail sent to tech that was here today asking him to forward my e-mail to whomever he made contact with today via phone that unless the situation is remedied that I would have to take further action. Now awaiting response from the main man tech or whatever his position is at Whirlpool.Bottom line is that it is a LEMON that has not only cost me money, but excessive amount of time to resolve this issue not to mention time spent online researching this, that and the other concerning this discontinued appliance. Warning to all out there - DO NOT BUY WHIRLPOOL - UNLESS YOU WANT A HASSLE and a lot of BS. Found they already have an extreme number of lawsuits against them during my online searches. So, ball is in their court at the present time. Will be calling them the end of the week once again in order to get this problem resolved unless I hear from them via e-mail.Totally exhausted from it all. Word to the wise: DO NOT waste your money on Whirlpool appliances unless you want more problems than you already have. I have health problems which are exacerbated by stress, and believe me this has been one of the most stressful and one of the longest things to resolve (two years) brought on by their lack of admittance that this DISCONTINUED product is a real LEMON. BUYER BEWARE OF WHIRLPOOL - I rest my case.Updated on 07/12/2018: Cant seem to find this model anywhere now. Not to mention the fact that I found it not only eats my delicate clothing, but is also ruining my towels, etc. and I use the regular wash cycle for these items. You cant find my model #WET4024EWO anywhere; looked like they put a similar one out with a slightly different model # in which the drum/agitator differs from mine. Now find Im having difficulty finding that NEW stackable model on the WEB. Leaves me wondering if that one has also now been discontinued???They have given me no resolution to my problem as of yet, and Im totally EXHAUSTED from it all. Have high blood pressure, a heart condition, and cant even sleep right anymore due to their lack of cooperation to solve this on-going problem which is certainly not helping any of my medical conditions either. Its causing nothing but STRESS, STRESS, STRESS and more STRESS! Will be filing a complaint with The Better Business Bureau by next week if not resolved by this weekend (if I live that long).Updated on 07/17/2018: In looking at this Washer/Dryer Combo Model # WET4024EW aka LEMON again today after noticing more clothes which now have holes in them after being washed on the gentle cycle with the highest water level possible, I noted the size of the agitator. Bottom line on this is that the agitator also appears TOO LARGE for the machine which also could also be another contributory factor to the destruction capabilities of this now discontinued model. Also, inspected towels today and found torn stitching & thread tearing in those also; appears EVERYTHING you wash in this machine gets destroyed. In researching further on their newer makes noticed that the agitator appears either much smaller or has been removed altogether. Hopefully this will serve to aid anyone out there who is thinking of buying this machine second hand from anyone out there that is attempting to sell it vs obtaining restitution from Whirlpool.

First of all, Whirlpool is fully aware of the problems with water heaters and intentionally places requirements on the consumer until they give up. This info from a distributor. I bought 30 gal. gas water heater 7 months ago. Six days ago the pilot light went out. Went to Lowes (purchased there) and bought a replacement. Wrong one. Returned to store and was told they dont stock repair parts, call factory. Monday called warranty number. They offers to send thermopile, it would arrive in 5 days. I paid $30 for overnight. Plumber installed new part. Still doesnt work. Whirlpool says have the plumber call them theyll walk him through troubleshooting. I ask, Whos paying the plumber? They reply, You are. Plumber calls Whirlpool. They tell him to clean the screen. He does. They tell him to disassemble the burner. I stop plumber. I ask Whirlpool, What if its not the burner? They reply, Then well troubleshoot something else. Meanwhile Im 5 days without hot water. I go to Lowes where heater was purchased. The manager thought it funny Im another victim. I ask, Why doesnt Lowes stock heater parts? He says because Whirlpool doesnt let them carry parts. Im beat. I surrender. Parts from Whirlpool would take another 5 days and theres no assurance itll work. Lowes refuses to assist.I go to Sutherlands and buy a $450 Rheem on recommendation from plumber. Manager from Sutherlands hears my sad story and writes on receipt: Any warranty failure and Sutherlands will replace water heater free. He signs his name on receipt. I pay plumber to swap out heaters. Anybody want a 7 month old Whirlpool water heater. Like new. Cheap! By the way... I originally went to a major appliance parts store asking for a thermocouple for a Whirlpool. The three guys at the counter started laughing Hey we got another one looking for Whirlpool parts. They didnt have them either. Lesson learned.

We purchased the unit in March, by April it wasnt cooling. In June it shut down. In July after 8 tech appointments and repairs. Whirlpool finally said they would refund my purchase and I should see the money in about three weeks. That would be about a week longer than the refrigerator worked. I dont have the money to just get another one so I guess the family will be without a refrigerator for another month. That means shopping every day for perishable for a family of 10. I would not recommend another Whirlpool product. This is no joke, every time I called them one of the first things asked was Did you get the extended warranty? Why would they ask, sounds as if they dont trust their own product either. This unit was purchase online through Sears.com. Purchase price was $2299.99. Order placed on March 4, 2017.

The Whirlpool Cabrio washing machine it’s the best washing machine I’ve owned. Water temperatures are right on, has an express wash 38 mins for lightly soiled clothes, plus the normal, delicate, heavy, bulky, 2nd rinse, if you need it. My wife loves it because it’s very Gentle on her personal items. Energy saver AND BEST OF ALL, IT REALLY CLEANS THE CLOTHES.

After having the ice maker replaced on our 14-month old Whirlpool refrigerator, things seemed to be working fine for a while. However, now there are puddles appearing on the floor in front of the refrigerator. This is a freezer-on-the-bottom model and the ice maker is at the top so I was fairly certain it has nothing to do with the ice maker. Turns out there is something dripping into the back of the freezer and over time it builds up a giant ice sheet on the bottom of the freezer compartment. When the ice sheet gets large enough, the dripping water flows out onto the floor. Now Im going in every couple of weeks and chipping the big ice sheet off the bottom so it will stop leaking for several weeks. When I see puddles in front of our refrigerator I know its time to go chip the ice sheet out again. Seriously, I dont think Ive ever had a brand new, and expensive, appliance perform so badly. Whirlpool... never again.

Whirlpool dishwasher failed after 16 months. It leaks continuously. they sent a service provider 5 days later out to fix it, then said there would be a $129 fee for coming (this was never mentioned at time of appointment), and the total repair cost would be $208. I wasted a day waiting for repair person to come, I declined the repair due to the cost. I called customer service later, during office hours, and I received the poorest level of customer service I have ever experienced. Whirlpool will no longer receive support from the our family. This machine cost over $500, and a ruined rug. Whirlpool wasted our time, and a day from work. We will never purchase Whirlpool appliances moving forward, due to this product and customer service experience.

I am a fan of Whirlpool and I think the issues I have with this Duet machine is more because of the style but who knows. This is a front loader with lower water usage. It would have never gotten my sons sports uniforms clean. Never. The gasket around the front loading window frequently clogs so water doesnt drain. And perhaps worse, the drawer where detergent goes stays wet so it had gotten moldy and I didnt realize it. Now I remove the drawer after every wash so it can dry and I leave the loading door open as well. That just seems like a major design flaw and health issue.

I agree with all the unsatisfied customers with the Whirlpool Cabrio! Clothes do not come out clean! I called Whirlpool also and was told to be sure to place my clothes around the sides of the tub, which I always did. If Whirlpool was smart, they would take the complaints about the Cabrio and offer the customers a small amount of money towards purchasing another Whirlpool washer. I know I would have appreciated that. Instead Ill go out and buy another washer and not a Whirlpool. Even my kids dont want this washer and its practically new!

Whirlpool gold model GI6FDRXXQ06 - This fridge is 3 years old and we are about to put the fifth ice maker in it. Vegetables freeze in the vegetable drawer (yes, its set correctly). Our repairman even says the design is faulty but since the warranty is out, we have to keep replacing the units!

This refrigerator (Model #wrf560seymoo, Serial # VS31343718) was new in April 2013. In the last 3 years it has required 3 service repairs. Two under the extended warranty, one recent one 3 months out of warranty. All repairs came up in the last 3 years. The first repair addressed frost build up in the freezer. The second required replacement of the water filter compartment and the third will be addressing water dripping from the freezer door when I open it. Even after turning off the ice maker and removing the frozen puddle from the bottom of the freezer, it still drips water when I open the door. I have a call into service on this right now. I would like the company to fix the current issue even though it is outside of warranty. This product is too new to have so many problems and be just over 5 years old.

Whirlpool Gold GC3SHAXVBOO - Two issues in two years. We purchased this refrigerator online through Whirlpool in April 2010. Almost a year later, a circuit board went. This was repaired under warranty. Our refrigerator was making loud cycling noises and we were told this was normal. Now a year later, again we have an issue. This time its the compressor. We called customer service and were told there is nothing they can do. The cost to fix approximately is $700. This is very upsetting to buy a $2000 refrigerator and have two major issues within two years and then not have the company stand by their product. I would wonder how many other people have this model and have these issues as it seems like a lot. Whirlpool customer service is terrible, non-caring and offered no assistance.

I have had my whirlpool oven for approximately 6 years. This will be the 3rd time I have had to replace the thermal fuse. For the last three times I have used the auto clean, it blows out the fuse. It has cost me $110.00 each time I called my appliance tech to replace the fuse.

On 9/28/16 I purchased 4 new Whirlpool appliances from Orvilles Appliances in Buffalo NY. They were delivered on 11/9/16, the refrigerator was installed. The microwave, dishwasher, and range were not installed until Jan. as my kitchen was being remodeled. Both doors were dented; it took 3 months for Whirlpool to send new doors. After installation water began pouring all over, gallons of it; it took a month to get fixed. The microwave door has a large defect and the surface light does not work; it is still not fixed. Six months later it is still it fixed. I feel like I paid a lot of money for defective appliances. Whirlpool is truly a company that does not stand behind their products; they could care less about their customers. I will never ever do business with Whirlpool again. And Orvilles also refused to help; it was a mistake to shop there.

I purchased a top load Whirlpool washer from Lowes 2-8-12. It got so it wouldnt rinse. When it came to that cycle, it just skipped it and went directly to spin. I dont know how long it was doing this before I caught it. A repairman came out said I would need the equivalent of a motherboard that would cost $330.00. Needless to say, couldnt afford that amount for repair. So I purchased a very nice used Amana for $100.00. I always thought Whirlpool was a top of the line product. This has changed my mind. If it wont last any longer than 5 years I dont want it. There are just the two of us and we are retired so the machine was not overused. I am so disappointed and angry about this.

I bought a Whirlpool WFW9470 Front Loader Washing Machine 11 months ago. The washer appears to complete a wash cycle but leaves the washing wet and with no error message or light. Whirlpool says the machine is not designed for light loads. The technician says washing on a light load will damage the bearing. We had the spin bearing replaced after 8 months. But still, the washing remains wet and the bearing wears out prematurely.

I love my new stove!! It cleans so much easier than my old one. Would recommend whirlpool to everyone. You cant beat the price for a Whirlpool because it will last way over a decade. My mom has one too and she said, Get a Whirlpool Lyn because they last so long and she said after 10 years hers still looks new!

Our whirlpool gas range has a defect - the material around the control panel is peeling and flaking; it is not possible to clean it and it is likely going to get into our food. It has not been cleaned with anything harsh - I use warm soapy water or stainless steel cleaner. I use the same thing on my other appliances and they look fine. I am waiting for a tech to come and look at it but after reading other complaints I fear that they are going to say it is cosmetic and it is not covered. Sadly, we can no longer wipe the control panel if it is dirty because the stainless steel is flaking off and it gets all over the burners and I am concerned it will get into our food. I am willing to bet the paint that is flaking off is not approved for consumption.I wish I had our old Frigidaire Gallery Series range back. I regret replacing it. Whirlpool was not helpful. They told me to contact the place I purchased it. The place I purchased it said it is a manufacturers defect. Someone suggested painting it with stainless steel colored spray paint which sounds like it is going to look awful. The new panel is $148 but it will need to be installed and if there is a defect how often will I have to replace it? I am very disappointed.

I purchased a Whirlpool washing machine (new) in 2004. From the beginning, I had problems with the spin cycle. I phoned Whirlpool. I paid for service with no reimbursement. With the costs I have had for service, I could have purchased 2 machines. I have had to go to Laundromat to do wash then come home to dry. I have for 30 years only purchased Whirlpool large appliance. My washer and dryer were always refurbished but they were Whirlpool. I have had a (refurbished) Whirlpool dryer since 1997 with one (1) service call. However, this wash machine, purchased new, has been a money pit and a piece of trash with Whirlpool only giving lip service when calling. Also, going to the Laundromat, I have been amazed at how many individuals I speak with are there doing wash because their Whirlpool washer, mostly even newer models than mine, do not work! And they have the same story. There’s no service when you call. Shameful Whirlpool! Buy your parts from us. Maybe your credibility could be restored. But I will never purchase your Whirlpool or other names under Whirlpool! When I do get another washer, yours will be put on my front lawn with a large sign of your disgraceful products and service!

Started researching online about a week ago because my dryer was making an awful noise. Found out that the new idler pulley system the company used in my Whirlpool cabrio washer & dryer model (WED5500XW0) was so ineffective that they have since started replacing it with the old part #691366 they used to use. Also I am having a problem with my washer not spinning all of the water out of the clothes. Found out that this is a common problem with this model (WTW5500XW0).Had a certified repairman out to replace the dryer idler pulley system. He also calibrated the washer to see if that may help (it did not). The repairman said that some of the Whirlpool washers had been recalled and he had actually replaced some control panels and that seemed to work. He suggested that I contact Whirlpool. So I contacted Whirlpool, thinking that they obviously knew that there have been many problems with these machines (idler pulley part being discontinued & and recall on SOME models), and thought they would be more than willing to rectify this problem. Well think again! The two young ladies that I spoke with sounded like robots, Unfortunately, you are not within your 1 year manufacturers warranty so there would be nothing we could do at this time. Although I must tell you, the second young lady I spoke with did offer to sell me a new washer at a deep discounted price of $386 (which is only $86 more than fixing the washer). I think everyone who has a problem should contact Whirlpool and express this dissatisfaction. And if you are shopping for a washer and dryer, stay away from Whirlpool because their customer service is disheartening.

On 5/3/16 I purchased an Amana high-efficiency, low water, top loading washer. What a joke, it is a piece of junk. There is no water so clothes dont come clean, and if you leave money in the pockets no worries. As it will be right there after the clothes are washed and dried (got matching dyer also). They dont even smell clean after two washing. And now you are to purchase a cleaner to clean your washing machine. This is truly not an efficient machine in any way.

Whirlpool - good price for pair. I have had this pair for over 10 years and they work good and are reliable even though they were not the top of the line models. Large capacity is a must - energy efficient is also a must. Discounts are nice to get but if not available I will go with a name brand. I want a washer with an agitator not one of the new ones that dont have one. Reliability is the most important factor so repairs are not needed. I want a full size washer with several cycles and all cycles have a cold rinse to save energy. Having a center agitator is a must - cant stand the newer ones.

I have a Whirlpool refrigerator and it is the 2nd one in 12 months. The first one the refrigerator was freezing food in the fridge part and thawing food in the freezer part. After several times a technician came to try to fix the problem and arguments with Whirlpool. They finally replaced the refrigerator. The new one is now doing the same thing. I am contacting Whirlpool tomorrow.

Water saver does not provide enough water to wet the clothes. Even deep wash cycle does not provide enough water. This is right from the start. We should have returned it the next day rather than trying to learn how to use it wasting time so it could never be returned. I rated them as 1 star because there was nothing less I could have given them. DO NOT BUY ANY WHIRLPOOL PRODUCTS.

After 2 months of owning this fridge (Whirlpool Model WRF993FIFM) it started making a horrible buzzing noise that you could hear all around the house, both ice makers stopped working, and it wasnt cooling properly. After three technician visits, and of course having to miss work to have the technicians come to my house, my fridge still doesnt work. The most recent visit today was from 2pm until almost 8pm, yes seriously 6 hours, and now the noise has gotten even louder and my ice makers still dont work. AND after the tech left, my carbon monoxide detectors were going off for almost an hour. We had to open all of our windows and sit outside to not DIE of carbon monoxide poisoning. So beyond livid with this situation. Its been a month since Ive had a properly working fridge. Whirlpool needs to do right and fix this situation. I will be calling tomorrow first thing.

Five years ago, I decided to splurge on a really nice (expensive) over-the-range microwave during a complete kitchen remodel and had the Whirlpool Gold Velos Microwave GH7208XRS installed, thinking Whirlpool would be a reliable brand to replace our 18+ year-old (still working) Kenmore countertop model that we had used previously. About 4 months ago, after a couple of mysterious cases of the control panel going haywire (turning on by itself in a different modes), it started pouring smoke out the top and service was called and the magnetron and inverter were replaced to the tune of $482.Fine, things happen. Yesterday, while opening the door, the handle snapped off and (upon closer inspection) I noticed cracks around all sides of the door frame - see photos. After reading about similar complaints about Whirlpool microwaves on this forum, I really feel that this is a defect in materials and should be recalled or at least addressed by the company if they want to maintain their reputation. Right now, I am waiting on their authorized repair service to see what my recourse will be.

Its a 25 side by side and though its a large refrigerator it seems small inside. That being said I would probably not buy a side by side again. I have always bought Whirlpool made appliances and have been always satisfied. I do not like refrigerators with the freezers on top.

Whirlpool wsv07 psl satina - I bought my whirlpool, two-door whirlpool ref last Jan 2013. Just few days before the warranty expires, I had prob with gasket on lower door. And now six months after the warranty expires, the freezer is not working and wont make ice anymore... and I will be charge 400php for check up. Reading on other reviews, I bet I am buying a disposable appliance from whirlpool. The national ref of my sis been a service to her for more than 10 years and its still going good. Our GE ref prior to whirlpool serve as for 19 years.... but this brand sucks.

I purchased a Cabrio high efficiency washer in 2011 and have had the glass top lid crack twice. The hinge is rusted, shedding rust all over the corner of the washer. It is a design flaw, for I see others have had the same problem with this particular year. I have also looked at the newer versions of the Cabrio and the lids have been redesigned. This lid should be recalled and replaced with a newer version, because this lid will always rust and crack with use.

We bought a Cabrio washer less than three years ago. I have never felt that it got my clothes clean. The washer recently stopped spinning and agitating. We were told by a very experienced repair technician today that the gear case and bearings in the tub need to be replaced at a cost of $700.00. Needless to say, I am very upset. I called the Whirlpool Company and after being on hold for almost 15 minutes, I was told that my washer is too old to qualify for any help with repair cost or part replacement. My household consists of two adults. We do on average three loads a week. This is an inferior appliance and after this experience I will never purchase another Whirlpool product.

Model WTW7600XOW, installed 12/9/2010. For about 4 months this washer has sounded like a jet plane when spinning. I called Whirlpool to see if it was recalled or what they recommended. They provided 2 repair places near me. The repair shops recommended buying a new washer since the repair is so costly. A 4 year old washer used by 2 people should have bearings that last more than 4 years.

I have called Whirlpool multiple times because our washing machine model #WFW9290FW has been out of service for 5 weeks now. I have been informed that I need part #W10604640, which is on back-order and they wont give me any idea of how long it is going to take to get this part replaced. Apparently, there are 96 total people who also need this part. I find it hard to believe that a company this big would not have this part on hand and they would not have any idea how long it would take to get it replaced. I asked them to give me a new washing machine for free to replace it because of the poor service and the unreliable washing machine. They told me they could give me another washing machine at 40% off, but based on the lack of follow-up and the amount of time that has passed since my initial call, I dont want another Whirlpool product. This is the worst customer service ever.

We purchased Whirlpool Gold Accubake, double ovens (gas) in 2005. Since then, we have experienced identical failures (8 to date) during the self-cleaning cycle in which the high temperature burns out the thermal fuse of the ovens. This requires two Sears technicians to repair the unit (it requires two technicians to pull the oven out as the fuse location is in the back of the unit) and leaves us without use of both ovens for approximately 2 weeks (scheduling parts delivery and technicians through Sears home repair is not an expedient process).After checking other consumer product websites, it has become clear to me that there is a known design defect with these ovens in which the thermal fuse is not adequately insulated from the high temperatures during self clean; it therefore trips and burns out during the self-clean cycle. While not having access to ovens for about two weeks/year on average may sound acceptable to Sears, the reality is that the problem has escalated in frequency since purchase. In 2013, we are going on our third repair of the same problem (that makes 6 weeks of non-usable oven time in one year) and Sears will not consider replacing the unit, despite: 1) our obvious dissatisfaction with a lemon unit, 2) a well documented history of the defect with this particular Whirlpool oven and 3) an ongoing and escalating repair cost to Sears (it is under their extended warranty so the repair cost is on them although we did pay for this service up front on our appliances).I would stay away from not only Whirlpool appliances but also Sears as there doesnt seem to be any regard for the customer experience and taking care of a product problem (the right way) with a known defect. Sears has an opportunity to make this problem go away quite easily and retain a customer - fix the problem permanently or just replace the defective unit. Unfortunately, my experience to date with Sears standing behind the products they sell provides me with little confidence that either will happen.

If you are considering a Cabrio washing machine, save yourself the aggravation and buy something else. I purchased a Cabrio model WTW5640X from Lowes 2 years ago. It has been one disappointment after another. First, the clothes were coming out really wrinkled and not fully rinsed. I now routinely use the extra rinse cycle. I also started washing very small loads with hardly any soap (and yes, I use the HE detergent). That works for me, but its not practical for a household of more than 2.This machine is also not for anyone with kids or who expects to remove routine soils. It doesnt clean well. White socks start looking dingy after a few washes, and even the hot cycle with bleach doesnt get whites white. Now, the washer has started shutting off with the clothes still soaking wet. I can press the Drain & Spin cycle to get it finish the job, but that adds another 13 minutes to the 63 minutes it already takes for a regular cycle with the extra rinse. I so wish I had not replaced my 15 year old Kenmore.

I would like to know if anyone else is having trouble with the broiler unit. The unit quit working. Thankfully I had purchased the extended warranty. The guy came out, cleaned the orifice and called it good. The next day I went to use it, and guess what, it did not work!! So we thought maybe we needed to leave the oven door cracked open a bit... Well, guess what... It melted two of my knobs!! We called, got another guy out here. He checked everything. Even pulled the stove out to check out connections. Then he informs us that you can set the broiler to whatever temp you want. Thats new. So again, we try the broiler.... Guess what... It got to the temp and clicked off. Now I ask, how does one broil a steak if it does that? I did call Whirlpool directly and got nothing. Our model is WFG361LVQ2. So please, if anyone out there knows that this is how it is supposed to be... please let me know.

When we moved into our new home in May of 2012 we needed to buy appliances. After much research we purchased all Whirlpool appliances at Lowes. After a year and a half our Whirlpool model WRT5L1SMYFOO failed to freeze or keep items cool. We called Whirlpool and they connected us with a technician who said it would cost more money to fix than buy a new one. He said that we got a bad one. We called Whirlpool again and received no assistance. Refrigerators should last more than a year and a half! I have seen other complaints on this model and have yet to see any proof of restitution from the Whirlpool corporation. This is complete consumer abuse. Some sort of action needs to be taken against Whirlpool. This corrupt behavior is the downfall of our country.

The washer itself doesnt get the clothes clean. The clothes on top never get clean, they smell. It doesnt spin out the clothes evenly even though I put them in evenly. There is oil on my floor under the washer and Rent-A-Center doesnt care and its under their Benefits plus program. They were to send off both washer and dryer last time and had no paperwork where washer was sent off at all. It has ruined a lot of my clothes with spots and I used the Tide pods. Stopped using them cause they were not working. I will never buy another Whirlpool product or appliance. Water pump went out in one year... Why would you not care about your customers... I got this set in 2013 and its the Platinum line triple top loader. You lucky to do one load at a time, a single load that is...

Had washer since 2016. Have NEVER washed a load where there was not a problem from washer dancing to having clothes come out without water ever touching them. Would NEVER recommend Whirlpool! Tried to contact Whirlpool website to register a rating & even their website is defective - could not get through after several attempts.

I own a Whirlpool Cabrio. I wanted a newer technology (no agitator) washer with top loading capabilities. I ended up with a four to five-year lifespan with this washer. The bearings are busted and it leaks water from the bottom. I have followed loading instructions specifically. It will cost about $1,000 to fix so of course, I am buying another washer and a matching dryer.

We bought this product and had only had it for a couple of weeks when I spilled soup on the open microwave door. My mistake, but I would think that might happen to other people once in a while. The soup leaked around the window gasket of the microwave and streaked the interior of the door. It also ran down into the door of the oven and streaked the interior of that door. No way to clean this up that I know of without taking the door apart. I think these gaskets should not allow liquid they leak into the inside of these doors. Whirlpool says its my problem. They call it a use and care issue. I think its a design issue.

Do not purchase Whirlpool smart freestanding gas range model number WFG975HOHV. I purchased the range and the refrigerator around Christmas of 2018. The first time I turned the oven on to make Christmas dinner the carbon monoxide detector alarm went off. I have tried to use the oven twice after that and the same thing happened. The oven also never gets to 350. I spoke to Whirlpool who said to unplug the oven. They stated a technician would be sent with a carbon monoxide detector and to conduct repairs. The technician came and could not get the oven to 350 and the carbon monoxide detector alarmed. He stated he has to order parts and return to complete repairs.This is a brand new oven that I could not use because the carbon monoxide alarmed and the oven was not heating to 350 because it keeps restarting every few minutes. So here I am not able to use the oven for over a month and waiting for parts for a brand new range. Do not waste your money on Whirlpool products. Also the customer service has no empathy knowing their products are defective.

We purchased all our appliances from Flecks - there were to be rebates. Also never received them. We have had our oven for 2 years - when I set the oven on 350 it will go up to 400 degrees & the temperature on the front of the stove is 350 then it will drop down to as low as 250 & the temperature will still say its still 350. I called the company - did will do nothing. Will cost me as much to fix it as to get a new one. This a Whirlpool oven.

Ice maker kept freezing up. Im continually taking the ice tray out to unfreeze. The frequent removal of the tray eventually broke the tab off on the liner. Ive now been told this (liner) is not a replaceable part and since that is the case, the warranty will not cover. Im upset that the repair technician did not process the claim properly and state that the make had a problem freezing. What kind of company would manufacture a product that would have parts that are unrepairable? You spend close to $2,000 on a refrigerator, wouldnt you think you would have an ice maker that works? I know they hope to sell more appliances this way but you can bet I will not be purchasing another Whirlpool anything! I will also be retracting my recommendations to friends and family to purchase a Whirlpool. The company does not stand behind its products.

This is a comment for the person with the ice maker problem. I have a side-by-side, in-door ice dispenser that clogs up. First sign of problem is either the ice wont come out or it comes out crushed. What happens is frost builds up in the path the ice takes at a couple of different points. The only solution I have found is as soon as the problem starts I turn off the ice maker using the switch on the inside of the freezer. Then let it empty with normal use (if you wait too long youve increased your problems). The release button for the ice bin has frozen by now so you cant just lift it out. The bin needs to be empty. When it is empty, work the bin loose and take it out. Youll find that frost and maybe cubes have collected, frozen and blocked the passage. Be sure to turn the ice bin on its side and spray water into the undercarriage to melt and remove all the ice build up there. I use a hot sponge to melt the frost in the ice tube and then dry everything. This gets messy so be prepared to have water on the floor. Dry the ice bin and reinstall it. Ice cubes will be ready to drop from the ice maker so it wont be long until you have plenty. I live in Florida with high humidity so need to go through this process about once a month. Its a pain, but now it is just part of owning this unit. Good luck and hope this helps.

Purchased a Whirlpool hot water heater from Lowes. Heater has 6 year warranty. Hot water heater is 1 year old and the pilot would not light. Contacted Whirlpool warranty department to what the failure cause. A new control was sent and replaced by a qualified journeyman plumber; still not working. Called whirlpool warranty department, told control valve must be faulty. We have gone 5 days with no hot water. I am not waiting another 5 days to get hot water. I am having the plumber take out this worthless Whirlpool heater and haul to the scrap metal business. That is where I should have sent it from the get go. Dont purchase a Whirlpool product. The money should be spent on a product that works and will last.

Whirlpool cabrio top loader is junk from the first month. My washer has had way too many repairs. A&E repair has been a frequent at my home. Now Im getting ready to repair it again! Hub gasket or pump not sure this time. All has been replaced previously. Never ending - always something wrong with it!!!

Whirlpool Dishwasher model # WDT720PADB. Replaced an old Maytag that was 12 years old; cleaned great but finally the pump gave out. From the first day that we cleaned dishes with the new Whirlpool, the dishes were not as clean as the old Maytag and totally wet even when the heated dry cycle was on. Repeated calls to Whirlpool customer service and two technician visits and still the same results. We end up drying every load by hand. Now after 14 months (two months out of warranty) only the silverware wash jets are working with all other zones inoperative. This machine is a plastic piece of junk and all it takes is one look at the cheap construction and components to say that Whirlpool engineers are competing with the Chinese made brands. This boat anchor is going to the curb tonight! Never again will Whirlpool get my business!

After 22 years, I replaced my Whirlpool, electric, 50 gallon water heater, due to age and it was still working well. Went to Lowe's and they do not carry Whirlpool any longer, so I purchased and installed an A.O. Smith water heater, electric, 50 gallon water heater, model ES12-50R55DV110. Hoping for as good a product now, as I had from my Whirlpool. Also, I installed myself.

I have a Cabrio washer displaying the F-1 error code. I called on Thursday, the 15th of Sept. I spoke to Vicky in the Cleveland, TN division. She told me that the F-1 code on my machine (model no. WTW6600SW2 and serial no. **) was covered under a recall at no cost, parts or labor (I specifically asked this question). She set up a service repair ticket with Freds Appliance at 888-453-7337 and gave me the date. I was home waiting when they called. The driver drove in the drive and asked if he was there for my Jenn-Air cook top! I said no, the F-1 error code on the washer. He explained that he had just used the last control board last week and he changes them frequently. I called Whirlpool. A very snotty Ashley proceeded to tell me that nothing was covered and I would have to pay. I asked for a supervisor and Ratna answered after a hold of 45 minutes on my cell. I explained the situation. After begging, she proceeded to tell me that she would pay for parts only. I explained that the tech did not have the parts, didnt even know the correct appliance, and now I have to take another day off work to meet him to have my washer fixed. I have not used the washer in two weeks. I used to only buy Whirlpool products. After reading all the complaints about the same error code from other consumers, I believe there are enough complaints that we as consumers should be protected.

Out of warranty, slab of ice forms every few weeks in bottom of freezer. I have to take a butter knife and chisel it out to prevent having to defrost the entire freezer. This is clearly not isolated as after reading online and this forum, it is a manufacturing DEFECT that should be fixed at no charge to the consumer. It was delivered and installed by the retailer that sold the brand - however it sounds that Whirlpool would rather lose customers to other brands - trust me I just bought a stove and bet your sweet behind it was NOT a Whirlpool. Neither will the replacement for this piece of crap be once I can scrounge up the money.

The oven is a joke. It does not self-clean. I have to buy oven cleaner and clean the oven like in the distant past. They are lying about it being self-cleaning. Do yourself a favor and buy a real self-cleaning oven. NEVER WHIRLPOOL.

Our Whirlpool Duet Washer pair is 2.5 yrs old. The washer didnt work at first, but a repairman found the problem and fixed it right up. They have not broken. The dryer has been fine and we have had them stacked for most of the time without any issues. My problem sounds minor compared to those others listed here, but this thing is ruining all our white or light colored clothes. They go in white, and come out covered with splotchy, dirty looking spots literally all over them! They werent that kind of dirty when they went in. It’s the oddest thing, like it makes dirt. Reading some of these concerns makes me wonder if it has a mold problem inside somewhere, and that is what is ruining our clothes. Tax return is coming and it is going. End of story.

I bought a portable dishwasher on 6/29/15. It didnt clean well, didnt drain properly. (I followed guidelines from the USER INFORMATION and used rinse). I called a plumber to clean out my pipes. My dishes were still dirty. I purchased an entire soft water system from Culligan. My dishes were still dirty. I called Whirlpool and Pacific Sales where I bought the machine, and got no assistance. On 10/2014 I spent $263.50 to repair and replace parts so the machine would drain. Sometime in January of 2015 it stopped draining again. I just got off the phone with Whirlpool who will not take any responsibility for this lemon. You offered me a policy to purchase for over $200!!! You want me to spend MORE money on a machine that never worked right???? How is that help? How is that standing behind your product? Then there was some lame offer to pay for parts, ONLY if I used your extremely expensive repair people and pay for labor, and $139 just to show up at my door. I asked who I can write to or talk to about this and was told by Sherri that there was no one to talk to but her. Really? Give me a reason to ever consider a Whirlpool product and to not slam Whirlpool whenever someones considering it.

We purchased a Whirlpool Overhead microwave and Quiet Dishwasher in May of 2017. Within the first year, the microwave needed new sensors installed. The repair person said this was a design flaw and he was getting many calls. Then at 13 months, the dishwasher wouldnt drain. The repair person fixed the problem and left reset directions because this can commonly happen. Now at 18 months later, the drainage problem wont resolve even with the reset. Whirlpool extended the warranty by 6 months but wont cover this repair. Two appliances, two problems. Dont buy Whirlpool.

I dont know who is the bigger idiot. The designer of this washer or me for not reading the countless bad reviews. I bought a Whirlpool 4.3 CU FT TL WTW5000DW machine on 7/19/2015. It does not come close to cleaning clothes. It now takes me three times longer to do laundry because I have to check every piece of clothing for any stains. These are minor stains mind you but, they will not come out unless I use something like Spray and Wash. My time is valuable, maybe I should drag my clothes to the river and beat them on a rock. Very disappointed.

We purchased a higher end cabrio model only 3 years ago. Last year, on about every 5th cycle, the load would not spin at the end. Id have to remove all the wet clothes, set it to drain and spin, start it and wait for it to hopefully kick in. When I do it right, it kicks into the spin mode. I had to quickly press start/stop to unlock the hatch and reload the soaking wet clothes and wait for it to spin properly. Yesterday the same thing happened again. This time, it did not kick in. I ended up flipping the washer over and taking a look underneath. I discovered that the motor was seized. It had lost all its lubricating oil and smoked the belt. Now, my 3 year old washer is sitting in the driveway awaiting a trip to the dump since I got fed up and went out and purchased a new Samsung top loader. I emailed and called whirlpool with no luck. Not impressed. When I went out to buy a washer today the first thing I told the salesman was to stick anything with the name whirlpool out in the trash bin out back.

Purchased a Whirlpool microwave for new home in December 2013. Model WHM31017AW-1. This is the second time the heater element has to be replaced. Im starting to learn the warning signals: open door and then a short time later the microwave would die a sudden death. In my 20s I purchased for my house in Boca Raton Fl all Whirlpool products... they worked forever. Now not so much. In order to get this one fixed again, I had to get a service contract for $300 which would be cheaper than getting it fixed again, heating element $400 and service call another $100. Serious $300 service contract money too much for a senior citizen. Never will I buy another Whirlpool product as a result.