We purchased a Duet from Lowes just a few months ago. Within 2 weeks we had an inoperable machine. After 2 phone calls a service technician came out and looked it over. He had to come back a total of three times to replace the motherboard. That worked for about six weeks and it died again. He came out again and replaced the motherboard again. Fast forward two months and the machine is once again inoperable. When plugged in, it makes an ominous growling sound but nothing else happens. The idiot who designed this thing has no common sense. Its programmed so that it will LOCK on any failure. Not only has every one of these episodes left us with a load of clothes in there getting moldy, you cant even get to the model number or serial numbers; both of which are only visible inside the rim of the machine.So adding insult to injury, your machine is broken, your clothes are in there getting ruined, and YOU CANT EVEN GET TO THE INFORMATION YOU NEED TO SET UP THE SERVICE CALL. If it had only happened once, Id laugh, but this is the third time and its not funny. We bought this machine because it said proudly made in USA. Next time, Ill support the Korean economy and buy a reliable, durable Samsung. The only positive I can offer is that the Whirlpool live chat person was able to set up the service call for me even though I cant get to the relevant data inside the machine. DONT BUY A WHIRLPOOL WASHER. Despite their legacy and US-feel-good associations, the sad truth is that they are poorly engineered and poorly manufactured.

LEDs on control panel started going out in four months. It’s a 400$ part. Under warranty but what’s going to happen in another four months? The range I had from the eighties was still working. You don’t get what you pay for anymore. Just excuses.

Whirlpool gas range Model WFG5245LAB2 has serious flaws that are a danger. I noticed the handles to turn on the burners seem sloppy. So sloppy in fact that just brushing up against the knobs will turn the gas on. This happened when I had someone visiting and we returned you could smell gas in the house. We were none the worse since we were out however my 3 cats were in the house the entire time. Tonight I removed the large grates that go over the burners to clean the porcelain. Once again I brushed up against the handle and the back burner ignited causing me to burn my hand. This stove is a danger to all.

Purchased the French door bottom freezer 29 cubic ft. refrigerator on Dec. 22, 2012. Ice maker broke Dec. 2, 2013 and it has been downhill since. Replaced it and it broke again on Jan 2, 2014. Been waiting ever since for replacement parts. In the meantime, the freezer went out. Compressor went out. Freezer is as cold as refrigerator at 40 degrees. Lost food out freezer and food molds in refrigerator after a few days. Repairman came to investigate and determined the refrigerator is a lemon and needs to be replaced. Thankfully for the 5-yr extended warranty, it will be replaced, but it has certainly been a headache. Everything shiny isnt gold...

Agreeing with many. How disturbing to buy a Cabrio Whirlpool washing machine about 5 years ago. I might as well go down to the river and wash my clothes. The bearings went out which means I have to be the spin cycle. I am hanging out my clothes on the line - very wet - until my husband buys the part and fixes it himself. I had my maytag for 25 years. An awesome, dependable machine that we laid to rest because of rust. We should have gotten another drum instead of buying this machine. Where are the engineers that are making dependable appliances to last a LONG time? We have not gotten smarter. Or we only care about the all mighty dollar. Make something to last a short time so that you have to buy again. We will do some extensive research the next time we buy a washing machine. Do not buy this machine!

I purchased a Whirlpool dryer Cabrio (model # WED7300XWO and serial # M03028918), which has had several issues. We had to replace the felt around the dryer tube twice, replaced the dryer tub itself twice, we had the air flow stop, and now the heat has stopped. Thank goodness I purchased an extended warranty, otherwise who knows what these repairs would have cost. I think I got a lemon. I have had multiple repairs, and days of not being able to use our dryer.

Another load of darks with white soap residue splattered across every item. Despite using a soap pod and setting to so-called Deep Water wash. Whirlpool top load WTW5000 is a terrible machine. As in other reviews, constant soap residue and clothes stretched and tangled into a compressed wad with deep wrinkles as you try and untangle them after the wash. Unable to dilute your soap and faking out the machine to get a bit more water are recurrent themes. Just ridiculous. There should be a class action suit for replacement. The customer service is useless and terrible - actually - there is probably nothing they can say and no answer or fix for this horrible machine.

In 2008, I purchased the 40-gal. Whirlpool electric water heater to replace the original unit in my home that had lasted 14 years without issue until it died of old age. After about 2 1/5 years, it died and I was given authorization to return it to Lowes at my insistence. Now after another 2 1/5 years, this one has died. So far, I have replaced both elements, lost a days work, missed out on a date because I could not take a shower and now Im told I have to replace the electrical box on top which wont get here until Monday. Its Saturday and I havent been able to take a shower in my home for 5 days now.The first CSR (Crystal) I spoke with implied that since I had 2 consecutive failures, this was a site problem, not a product problem. Theres nothing special about my site, and my old unit made it 14 years with zero repairs. I would argue that since both of the units only lasted 2 1/5 years, that the product is substandard. I asked to speak to a manager but was told no because they were all busy (no doubt) and her demeanor was unapologetic and unsympathetic. The second CSR (Nick) I spoke with was very nice and at least sympathetic. That goes a long way in customer service, but I was still not allowed to speak with a manager.I am going to try and repair it one more time, but I have zero confidence in Whirlpool and would never buy another Whirlpool product of any sort again. If I get it working, and after all Ive read here I doubt that I will, I will only be using it for the time it takes to get a replacement of another brand. This was my first experience with a Whirlpool product and you can be sure it will absolutely be my last.

We purchased a Whirlpool Countertop Microwave (model MT4155) at HHGregg on 6/02/2012. (This was a replacement for another oven that failed after a couple of years - NOT a Whirlpool.) On 6/04/2013, i.e., 2 days past the standard 1 yr warranty expiration, the oven went nuts. I was cooking a plateful of baked potatoes on the auto setting. When the potatoes were done, I opened the door to take them out and the oven started to run! WITH the door open! When I shut the door, it stopped. So the only way to get the oven to operate was to OPEN the door. I dont think this is a safe or effective practice. Knowing it was two days past the warranty, I called customer service anyway just to see what they would say. To my surprise, they (I talked to two different people) were VERY pleasant and accommodating, and offered to cover the cost of repairs and even set up an appointment for the authorized repair person, and then called to verify the appt. as well. Great! I was impressed!The repairman showed up as scheduled and seemed puzzled at first, but he dismantled the outside cabinet and determined the fault was in the door switch. He wasnt sure he had a replacement with him, but he did find one, put the new part in the oven, and re-assembled everything. We made sure it worked and he then left. Fast forward 5.5 months, when again I was cooking potatoes (boiled this time. Maybe the oven doesnt like potatoes!). I had the timer set for 20 minutes on 100%. I was out of the room when it quit cooking, but I think it ran for about 6 minutes and then just shut off and could not be persuaded to restart. The clock continued to count down, and all the other bells and whistles still functioned - it just wouldnt cook. Major hassle. The following day, I was looking at it, messing around to see if I could figure out what was wrong, and discovered that if I pushed on the door latch just a little, the oven would run. Well, thats a nifty workaround, as long as you arent doing any more than briefly reheating something, but not so great if you are actually trying to cook something. I continued to do this for the next few days and then suddenly one night it reverted to the first bad behavior - only running when the door was open. I was able to get that to stop, but the following day, it refused to work at all and it is now sitting here uselessly, just a little over 1.5 years old. I want to go buy another oven (and YES - a different brand!) - my SO wants to repair this one, again. After reading the experiences of others on this site, I REALLY cant see the point in repairing esp not if I have to pay this time (which I probably will), and also when it seems to be a faulty part/design causing this problem. I dont have the time or patience to deal with an unreliable appliance, esp one that I use often. I have not tried to call customer service yet, but Im not expecting great things, not this time. Planned obsolescence? Sure makes me wonder.

Purchased top loading Whirlpool Washer WTW5000DW0 10/12/2015 at Best Buys, first no agitator machine for us. Two weeks later I call for repair service because of the noise from tub. Explained in other reviews as earthquake or jet engines. The machine is in the garage and can be heard through the walls into the house. Repair tells this is normal for the machine and it must be our first none agitator machine.I then purchased a extended warranty policy through Whirlpool. 12/13/2016 machine no longer washing clothes. Call Whirlpool for service. Repair came out 01/17/2017 (a month later). Washer plate had to be replaced. The gear was completely shredded. Not in stock, waited 2 weeks to get repaired. Tension springs on outer tub replaced at same time. Was told the excessive grinding and bumping of the tub was not the reason for the gear shredding.06/30/2017 same problem, I set a repair date 07/01/2017 between 8:00 a.m. and 12:00 p.m. No one shows and no call. I call Whirlpool and they are sorry and set the appointment the same day for before 5:00 p.m. No one shows our calls. I call back. Already closed. I call the next day. Sets a new date 07/05/2017, 8:00 a.m. to 12:00 p.m. Same problem. I called back speak to a supervisor who says hell get to problem and find out whats wrong. Sets a new date 07/08/2017 8:00 to 12:00 p.m. 07/07/2017 I get a call after 5:00 p.m. that the repairman is not available and can we reset for 07/13/2017. I hung up and called back the next day and spoke to a supervisor I had previously spoke with. He called an outside repair company that Whirlpool uses in this area. New date 07/12/2017. Repairman shows and I explain the washer plate was loose again and I smelled metal burning. I had told my wife to continue to use the machine to wash the clothes. The repairman tells me I voided the warranty by doing this. Im standing in the garage while he has his head in the machine trying to get the washer plate out. He shuts the lid and turns the machine on wash/spin says the machine is ok. We have an exchange of words and tell him I want to see the washer plate gears. He says he cant get the plate out now and I wasnt there for him to show it to me. This continued until he forced the plate off. He called Tech Support to say I voided the warranty. He told them customer claims loud noises and banging. I asked to speak to Tech but he tells me they dont speak with the customer. I looked at the gears on the washer plate and the transmission. Both had metal shavings. He tells me he is going to do me a favor and replace both. Its supposed to take a week. Wait and see. I have asked for a replacement or money for the machine through Whirlpool. I was told there has to be at least 4 repair requests for the same problem and the repairman has to determine that there is a problem or that its a lemon. I will not recommend or purchase another Whirlpool product.

Purchased the fridge from hhregg in August/September 2012. Model G16FARXX. After less than three years of owning it, found out today that the compressor is shot and will have to be replaced. Replacement/repair costs are ~$900, almost as much as the fridge brand new. Chatted with customer support and then would/could not do anything. I feel ripped off. If it happened after 5 years of use, then my attitude would be different, but not a major component going out in less than 3 years.

Purchased the Whirlpool electric range with aqua lift technology. Have the stove for 21/2 yrs and have tried contacting Whirlpool on numerous occasions. Email and telephone. Only response I get from them, is that Im doing something wrong. How can you do anything wrong? Add water, push button. I finally put in a call to World Headquarters but had to leave message and nobody has returned call. I finally called a whirlpool serviceman and he told me the Aqua lift is not a true self cleaning oven. The temperatures dont get hot enough. It was meant to just loosen the dirt on the bottom and then you have to scrub. The button you press to start the process on the stove states SELF CLEANING. I believe they have mislead the public with their advertising. Im thinking about any options I may have.

Having serious health issues with both our washer and dryer. I believe there should be an urgency and more serious resolution. Our washing machine is getting clothes trapped and producing friction causing excessive and heavy smoke from the drum. Our dryer has a random bolt/screw in the drum that catches and tears clothes. Although this doesnt happen on every cycle. It happens enough that it should be investigated, repaired and reported to Health Canada. I contacted Whirlpool on September 15th 2015 with my concerns. Nothing is being done! Ridiculous. WASHER Serial: HL23299429, DRYER Serial: M24507313.

We bought the Whirlpool water heater and not long after, it quit heating. After many phone calls, we finally got a response and were told to get the replacement thermocouple. We did this and it was the wrong part. We found out that we had to have a right hand thread thermocouple. Now, the heater is out of warranty and we cannot keep it lit at all. It takes at least 3-4 times before it will light once and then it goes out every time the hot water is used.

Bought Whirlpool Dishwasher MDf760SADMZ including protection plan in November 2015. Product did not last even four years --top and bottom racks began falling apart-- and drain motor went out causing near flood in my kitchen. Disappointed consumer.

This is the worst washer ever. I purchased this washer (Whirlpool Cabrio Washer Top load) brand new in the box thinking it was a great price and a good deal. Worst choice ever. I have been so disappointed in this product. It is very noisy which is something I have learned to live with. It doesnt even get simple stains out. I have tried every load combination and change detergents and stain remover a couple of times. Most time I have to soak stains again and again and then wash several times and most times it simply doesnt clean clothes. It leaves detergent residue on dark clothes so of course I end up washing those again as well. The towels and sheets turn into mushrooms in the bottom of washer.

Water heater was defective from the factory with a pinched wire between the thermostats. After replacing everything on the heater Whirlpool would not reimburse any parts or labor for the unit... Whirlpool is dead to me now, and forever and I love to tell my story to prospective buyers of their products!!! So far, to date I have cost them about 14 sales of major appliances (and still counting!!!). After reading some reviews… Im (sorry, I omitted the personal insults) in respect of your review guidelines.

I purchased a Whirlpool water heater and after working fine for about 2 1/2 years, I began having problems with it staying lit. I dealt with troubleshooting beginning in January of 2012 and finally in March of 2012, I was sent some replacement parts. The unit worked fine through the summer and once the weather started getting cold in October of 2012, I began to have problems with the unit again. After a couple of months complaining and threatening to file a BBB complaint, I was sent all of the parts left to change on the water heater. And I was told after the parts were changed if the unit still did not work, that it was probably a venting issue and that I would be responsible for that issue and the unit was not defective. I received the parts on 12/04/12 and they were changed out the same day. Now the unit will light when I hold down the button to light it but once I let go, the pilot light goes out. At least before changing out the parts, the unit was able to be turned on and sometimes it would work and other times it didnt, but now it will not light at all. This is very frustrating because the unit is under warranty and Whirlpool has for an entire year fought me tooth and nail just to send me the parts for the unit, only for the unit to still not work. I have a family and it is discouraging to not know when you are going to have hot water, having to constantly fix the unit or to call Whirlpool to troubleshoot and finally for the unit to still not work after replacing the parts. It looks like I will not have any hot water at all now.

I purchased a 40-gal Whirlpool water heater model 40t91-403 last week and paid a plumber to have it installed. The old one (GE 40 gal) worked fine except for a leak. The new one used all of the old connections except the 2-inch in and out pipes. Same connections, hot, cold and gas. At first I got about a quart of hot water and then all cold. Whirlpool changed the valve and cold water pipe (inside the tank) and still the same. They are trying to tell me that the tank is fine - I have a plumbing problem. Two plumbers have told me different, but still they insist. Yes, I am upset. The old GE, even with a leak, performed better!

Whirlpool g2 convect/micro over the stove oven - This top of the line oven is JUNK, KEEP YOUR MONEY-DO NOT BUY THIS JUNK! I have had problem after problem. Starting after only three months. Defected door switch, touch screen, flashing screen, error message. The service repairman and I are on first name bases. Thank goodness for the, out of my pocket warranty which I no longer plan to keep. I NEED A OVEN AND DEFINITELY NOT A WHIRLPOOL.

I had a 14-year-old 40-gallon tank that was working great but I decided it was time to get it replaced. I picked out a Whirlpool 400-gallon tank stated to be good for a family of 3 to 4 people. Immediately after installation, I got complaints from family members that there was no enough hot water for morning showers. I turned up the thermostat to the maximum 140 degrees, but there was still wasnt enough hot water. The Whirlpool rep on the phone stated that 3 people cant take back-to-back showers. The unit wasnt designed for this. I told him the unit is advertised for a family of 3 to 4 and I have only 3. I asked where on the advertisement does it state 3 people cant take back-to-back showers? His response was, Where does it state you can? I asked his name and he would not give it to me. If 3 people cant take showers on a unit stated to be for a family of 3 to 4, something is wrong. Maybe it should be advertised as suitable for a family of 1. I will not buy a Whirlpool product again and I advise others to take my advice, go elsewhere.

Im no longer buying Whirlpool products. They do not all up and are made like crap. My Cabrio washer being the most recent problem. Hinges broke on the lid and the drum spring broke. Out the door it goes! Im having my American made Speed Queen delivered tomorrow, the last Speed Queen I owned last over 30 years.

I also fell for the Consumer Reports BEST BUY of the Whirlpool Cabrio set. The dryer has had the heating element replaced 2 times already in 3 years. The washer reads all errors, and the repairman said today, “dont bother fixing, buy a new SPEEDQUEEN.” With the Board going out, and also the faulty bearings--will NEVER buy anything Whirlpool again.

Purchased from Home Depot and self-installed. That part was not too big a deal but after installing this stove we started a journey of irritation, aggravation and general dissatisfaction. This stove has the standard layout for burners that seem to be common to most low-end stoves. Two huge burners in the front, a simmer burner at the right rear and a general purpose burner at the left rear. Thats all wrong for me and our set up. I want a large burner at the left rear and general purpose every place else. Can you alter the standard configuration? NO! Not without some major alterations to the stove top.Next are the grills or cast cooktops (2 each). They are a bit cumbersome when cleaning the stove but doable. The real problem with the grills are Whirlpool decided to save money by skimping on this feature. The grills are not a stable cooking platform for smaller pans and it turns out Whirlpool recommends square pans for this stove. SAY WHAT? I have pans and skillets from my grandparents and they are ALL round. Thats how that stuff is made. ROUND! The grills design is unstable for any round pot, pan or skillet, if its diameter, is 6 or less. Kiss that excellent saucepan goodbye if you have this stove. My current solution is a piece of light expanded steel over the burner areas.Keeping in mind we use Propane as our heating gas. The adjustment of the flame temp on the four burners is non-existent. They all are either on high, medium or low. There seems to be no fine tuning with these burners. At the end of the day go look for something that is NOT a Whirlpool, LP gas range Model #: WFG515S0EW. You will be better served and less irritable with almost anything else. Even a campfire in the yard is a better choice.

Whirlpool Duet Washer - The washer after 14 months started to rumble like a freight train under spinning condition. I call Whirlpool and the answer was to purchase an extended warranty or buy the parts for over $700.00 and pay the tech to fix it for another $250.00. A washer should last more than 14 months. I think the parts and the repair cost more that the price of the washer. This is a rip-off.

Bought a standard 18 cubic foot top mount Whirlpool when moving into my first apt. The refrigerator cost a little over $500.00, is spacious and energy efficient. No ice and water in doors and no chip boards for any controls but still working perfectly. It is now 30 years old and never even serviced. When buying appliances get basic, do the job units and nothing with chip boards. They are still sold today and the fridge I have costs less now.

Purchased this machine in Jan 2012. From the start, dark clothes came out with white streaks on them. Thought I was doing something wrong - kept using machine. Then started noticing my whites coming out looking very dingy, light tan stains on them. Called Whirlpool and was told to use Affresh tablets to CLEAN my washer - why should you have to clean a washing machine?Several weeks ago noticed machine getting very loud during spin cycles - and I mean loud! Sounds like a jet engine taking off in my basement. Called repairman - he listened to my machine and said noise is the bearings, seal not fitting properly around bearings and the grease for bearings is slowly leaking out into my wash cycles. Explains the dingy whites and spots on darks. Said he just worked on a Cabrio with same issue - had to rebuild seal and bearings - about a $450 job. After reading all these reviews, decided not to attempt to fix this machine. Going to scrap it and start over. $900 for 3 yrs of an inadequate washing machine!! Whirlpool should be made accountable for this inadequate product to all of us consumers who threw away hard-earned money. Reading up on the Speed Queen agitator model. Lots of good reviews. Think I will go back to the old tried and true way of washing clothes.

Purchased a gas stove June 10th, three days later smelled gas. Called the store where I purchased item, they gave Whirlpool 800#. They set an appointment 2 weeks out. Got part then burners only clicked. They ordered more parts. Now top range works. Started to use oven and got extremely hot. Called store. They referred back to Whirlpool. After hour and half they scheduled appointment. First appointment he didnt have tools to check temperature. Rescheduled for following week. He said oven was off 30 degrees. I then went to store to ask to return item. They said up to Whirlpool. On phone with Whirlpool over two hours, them switching from one department to another. No help. They insist on fixing again tearing up unit in my new wood floors. Dont buy anything from them.

For years, Whirlpool has had an outstanding reputation for quality, so I cannot understand why a refrigerator I have owned less than three years has to have all the shelves and bins replaced. Not the glass, just the plastic. They actually started breaking the first year. I have literally had to tape my shelves together. These are very expensive and yet they are very low quality and of course are not covered on the warranty.The plastic is not built to withstand the cold and/or weight of food products. They need to get rid of the plastic and replace it with metal. I dont want to replace them with the same low grade products. I own the model ED5JHEXTB00 serial # HRU4010107. Also, the ice maker has been replaced twice. What has happened to Whirlpool

My French door refrigerator and freezer stopped cooling while under a 5 year warranty. The repairman came out 4 times to fix it over a couple months and I lost the ENTIRE CONTENTS of my refrigerator and freezer 3 separate times! I am a single mom working at a non-profit agency and I had to take 4 DAYS off of work to accommodate the repairman. Finally the repairman notified Whirlpool it could not be fixed and I was told by Whirlpool that it would be replaced under the warranty and I should wait for a call back, which never came. I called back after a few days to speak with the Exchange department and Mindy told me that I had to pay $1600 to get the exchange! When I asked to have the call escalated she flatly refused! What kind of corporation is Whirlpool that would treat customers this way? Never mind that the quality of their products gets worse with every passing year! Made to break so they can force you to buy a new one! Ive been without a refrigerator for 8 days already and cant feed my family properly with no place to store food!

I bought a heater from Lowes in south lebanon ohio in feb. 2013. Gas valve is bad. Whirlpool will not replace it because it was put in a utility room with a toilet in. What a bunch of crap. Their service dept. is joke.

Purchased Duet Washer and Dryer just over a year ago. Recently liquid detergent has been seeping into the tumbler and damaging clothes if theyre not removed immediately after wash in complete. The precision dispenser cartridge is the culprit in my opinion. Its suppose to dispense detergent as needed however it doesnt stop dispensing. Called Whirlpool and received no satisfaction. I would not recommend the Duet washer as a new purchase. I have to pay the price for Whirlpools experimental dispensing device and I dont think its fair. Its a flawed device and they should fix it.

Something inside the machine broke causing it to tear up my clothes! I had it repaired once, now it is 4 months outside warranty and it is destroying my clothes again. Whirlpool will do nothing to help remedy my problem. They did offer to help repair it at a cost of $350. Not happy with my Whirlpool washer. Looking to replace my 16-month old washer.

I purchased an appliance package Whirlpool Gold series that included a range, refrigerator and dishwasher. This was approximately 3 years ago. The range has already been replaced by Whirlpool after having it repaired twice and, finally, following the complete breakdown on Thanksgiving with turkey in oven. The refrigerator has broken twice and the computer box that controls all functions was replaced twice. The compressor goes off randomly and is currently off again at the moment. I woke up this morning to this and the temp inside is around 50 degrees. Needless to say the food inside is a loss. I will never purchase any Whirlpool appliance again. These were not inexpensive appliances by the way.

I will never buy another Whirlpool again or recommend them to anyone, and discourage anyone from buying one. I bought a Cabrio washing machine just over 2 years ago and yesterday I received an F51 error code. The manual says that this code requires a technician to come a check for repairs. Well, before I do anything I google the problem, and lo and behold there are thousands of complaints about this issue with the Cabrio models. Some saying that what needed to be replaced were a control board ($280) and a rotor (unknown amount), not including the price of labor. Some said that Whirlpool knows about this problem and they covered the parts and repair. This didnt get my hopes up, but I called customer service and of course they said that there were no reported issues with the model and that what I found on the internet was probably an older model. Of course! The lady on the phone told me that they would not cover the costs and it would be anywhere from $300 to $500 depending on the route I wanted to take. That is a 1/3 to 1/2 the price I paid for the machine. This is ridiculous! I am tempted to just get rid of the washer and go with a better company that actually cares about their customers. This error code was definitely something they know is a big deal if there was nothing I could do about it other than call a technician. I paid almost $1000 for a machine that has barely lasted 2 years before I have to pay money to have it fixed. Not a company I would ever purchase anything from again!

I bought washing machine Whirlpool Cabrio Model WTW7300XWO two years ago. It only lasted 2 years and the tub seal and tub bearing went bad. I called Whirlpool and they wouldnt replace defective part on their dime. I talked to supervisor and they still refused to admit they needed to fix this broken product on their dime and make it last longer than 2 years. They claimed only a 1-year warranty. This is totally unacceptable to have a supposedly good washer that you pay $700 for (manufacturer price $899) last only 2 years! Very, very disappointed! I wouldnt buy from this company again!

I bought a Whirlpool top loading washing machine with dryer on top, model # WGT4027EWo, last August, not even 3 months old and noticed the lint was not coming off the clothes. We tried cleaning out the washing machine with vinegar, wiping down the sides, using smaller loads and even used the gentle cycle. Nothing helped. We have had 2 different repair men out and they said there is nothing wrong with the washing machine and to put the clothes in the dryer and use fabric softener. I have never had to use fabric softener in my washing machine to get my clothes clean. When reaching out to customer service, I have spent over 2 hours and no satisfaction. They state that the technicians say there is nothing wrong with the machine. I was told by both of the technicians that they removed the lint trap from this machine, but no one is taking responsibility. My whites have blue lint and my darks have white lint, so too strong an agitation, as suggested by one repairmen is completely wrong! What to do when you spend over $1,000 on a washer/dryer combo and they dont work correctly and Whirlpool doesnt stand behind their product? Honestly, I will never buy another product from this company, and I 60 y/o and never made a complaint before about a appliance in my life!!! I dont even think I can give them 1 star! DO NOT BUY WHIRLPOOL - CUSTOMER SERVICE IS HORRIBLE!!!

My refrigerator & dishwasher were purchased less than a year ago. Ive already had all the doors replaced on the fridge and the new ones are rusting. Discovered same issue with the dishwasher. The company doesnt seem to be overly concerned with remedying the issue. No sense of urgency or concern for the customer.

We bought the Whirlpool refrigerator from Home Depot. The ice maker does not work. We get 2 cups of ice a day. Home Depot Told us we should get 8 to 10 pounds of ice a day. We call a repair service and they said we should get 2 pounds of ice a day. Still getting 2 cups a day. Call again and now they said we should get 64 cube of ice a day. So now Home Depot has us calling Whirlpool instead of them. Now we will have another repair company coming out. Waiting to see what they have to say.Very disappointed with Whirlpool for not backing their refrigerator. And don’t buy from Home Depot. You can’t return if you buy it. And I have a warranty on it and they have a lemon law 3 repair calls for the same thing and they will take it back. Not true. I will be calling once a week for 5 years until they get me some ice. They don’t deserve a 1 star.

Let me start out by saying that I had a Whirlpool washer that lasted me for over 25 years and done a great job of washing my heavily soiled clothes. One day it refused to run and I tried to get parts for it but it had become obsolete and no parts were to be found for it, so I had to buy a new washer. I chose whirlpool again and let me say that it was a huge mistake. This model is a low water, high efficiency, top loading machine. It has nubs in the bottom that agitate to clean the clothes. The first time that I used the machine, I found that I had made a mistake purchasing this machine. It does not clean the clothes and there is NOTHING efficient about this machine. I have to run the washer twice to clean my clothes and they are still not clean. It leaves soap in the clothes and does not rinse them clean of the soap. What it does very well is extract water from the clothes during the spin cycle. This washer really turns up the high RPM`s on spin cycle. It has ripped apart several of my shirts during spin cycle. Whirlpool really failed badly on this machine. I see clearly now that Whirlpool is not the company that they used to be back in the 1980`s. I still have the whirlpool dryer that I bought back in the 1980`s and it still works very well. To end this story, I loaded up this NEW WASHER in the back of my truck and took it to the scrap yard and I asked them to destroy it in front of my eyes. I wished that I had recorded the destruction of this piece of JUNK and posted it on YouTube for the world to see. I got over $450.00 of pleasure watching the crane operator completely destroy this pile of crap. GREAT JOB WHIRLPOOL … YOU HAVE LOST A CUSTOMER FOREVER. I WILL NEVER BUY ANY OF YOUR PRODUCTS FOR THE REST OF MY LIFE and will advise others not to buy Whirlpool products as well. I am a male, 62 years old and work hard for my ill spent money on your JUNK. Life is always a trial, live and learn the hard way. Warning to all consumers. Do not buy Whirlpool products ever!!!! Whirlpool can K.M.A!!!!

Called Whirlpool about fridge and they stated Too bad its out of warranty. The sides are getting pitted. It is a stainless with black sides. The condo is always air conditioned. It is two years old. Not very long to have a $1200 fridge look terrible. However, the fridge works fine.

We bought a new side-by-side refrigerator (GSF26C5EXB00 26cf) with water and ice in the door. We have had to replace the built-in water filter every two months at $30+ per filter. This is unacceptable. We just want to know what to do to fix this problem. There is only one person who uses the ice maker, and no one uses the water in the door.

Whirlpool Cabrio washer - Its been a month now and still the washer is not fixed. The repairman through Lowes warranty service is the worst by far I have ever dealt with. I had new transmission put on, still wont agitate and smells hot. The washer is only 18 months old, well taken care of. This expensive hunk of junk is worthless and the aggravation for all this mess is worse. I called Whirlpool 2 times. The first time, I got a call with the standard oh so sorry bit. Oh boy, that gets the washer fixed. Not. I blasted them and Lowes again. I have had it with this mess. The repairman is supposed to contact Lowes a week ago for replacement. He has done zero. I called Lowes to check. How can they sell this junk to customers who pay for this washer? They know it is junk, Lowes and Whirlpool, so do the right thing and recall the junker for refunds to consumers.

I purchased a Whirlpool Cabrio washer (WTW6500WW1) on 9/11/09 for approximately $800. Now three years later, it needs a new rotor and stator costing $470 in parts and labor. I called Whirlpool and was told I could get no help with the cost of parts because of the age of the machine! A simple Google search of the F51 error code that I am getting will show you that these machines are $800 pieces of junk! I am not repairing this machine. I am going to run it until it dies and simply buy a new washer. You can bet your sweet self it will not be a Whirlpool! I can only hope to inform enough buyers about this to keep them from the same fate.

I purchased a gas range with JDR8895 last 09/06/2007 at Home Depot in Metro Denver for approximately $1700.00. I will make my final payment on my Home Depot account next month. I was preparing dinner last September 10, 2011. I had the pans on the cooktop, one on the right rear and one on the left front burners. This was the set up because the right front burner has stopped working some time ago. Both burners were on a low setting as I was simmering pasta sauce and just warming water as I was later going to boil it for the noodles. I was in my living room when I started to smell something odd. When I approached my kitchen, there was a fire coming from the rear of the cooktop and beneath the three burner knobs. It smelled like an electrical fire. I immediately turned off the burners with my hand wrapped in a towel and started putting out the fire by hitting it with the towel and blowing. The towel caught on fire. I grabbed my fire extinguisher and was ready to spray when finally, it looked like it burned out. The smell in my home is terrible, when I tried to test the lower burner it looked like it was catching on fire underneath the knob as well, so i immediately turned it off and batted it with a towel. Im not sure what happened here. I will make my final payment on this range next month and had the previous range in here since 1977 and that still worked fine. I spent a small fortune on this Jenn-Air, only to have it catch on fire that could have potentially burned my house down.On various web sites including consumer affairs, JDR8895 has many reports of fires. If this is a known problem, why has it not been addressed as a recall? My 9-year old was making soup the day before while I was in the living room. This could of easily happened to her! It is a very dangerous situation to put your consumers in!Whirlpool Corporation contacted the appliance repair company, Columbine Appliances, to inform them that they would only be covering the cost of their visit and not the cost of the parts to be replaced in the range (the ones that caught on fire). Through Columbine Appliance, Whirlpool wanted to inform me that this is not a safety hazard and that it was my fault as I got water in the control knobs. This is not true. If I did, I was not aware and was unable to find any literature about that being a safety hazard or that it could cause a fire. I have found and have forwarded to the CPSC many instances of this exact problem, often when the range was not even in use and are happening to other consumers. I am working on combining the data, contacting the other consumers and have since refused service on the range by Columbine Appliances. Whirlpool only tried to contact me after I left them a message regarding the status of the range and that I had no interest in paying for what I viewed as a defect in their range and a safety hazard. I found a news story of this range going up in flames. Its unbelievable that this company continues to stand behind this product and blame these fires on the consumers actions. I am disabled and have an oxygen machine in my home. I have no desire to have this unit catch on fire again and potentially die, especially since water does, on occasion, end up on cooktops. Thank you for your time and attention to this matter.

I am writing to inform you of my dissatisfaction with the Whirlpool Duet washer and dryer I purchased in December of 2011. The model and serial numbers are YWED94HEXL0/M12602088 and WFW94HEXL2/c12350046. After using them for several months, I have found that the performance of the washer and dryer to be poor. I find the clothes do not come out very clean. I used my mother-in-law’s GE washer to compare and found that the clothes came out much cleaner in her washer. I was astonished at the difference. The white clothes, especially, were so much cleaner than in my washer in which white clothes, especially, come out looking like they have not even been washed. I am unhappy with the dryer as well, which continues to shrink my clothes a lot. I am distraught with this situation as this was a big purchase for me. I believe the quality of the washer and dryer is simply poor and I would like an exchange with a better quality set which actually cleans my clothes. I rely heavily on my washer/dryer as I have three young boys who go through a lot of clothes. Please let me know what can be done on your end. Thank you kindly.

We purchased the extended warranty (service plan number **). The washing machine has been giving trouble. It locks out during every wash cycle and each time, we have to unplug the machine to reset it. Sometimes it makes it through the next cycle and sometimes, not. The first couple of calls we made, we were told to make sure it was cleaned, to make sure it was leveled. All this was done and we still have the same problem. Finally, a technician was sent out. He could not duplicate the problem and left. Thirty minutes after he left, the machine locked out again. We put in for another call, we were told it would be two more days. In the meantime, we actually video taped the next three times it locked up. This time, when the technician came out, he was able to see our video as well as saw the machine lock up. He stated, It did not give me a code so I do not know what else to do. He left and ten minutes after he left, it locked out again. We immediately called back and they informed us they could not get anyone out again until next week. This is very frustrating to have an obvious problem and have an extended warranty and the problem cannot be solved. We feel as if we are being blown off. Is there anything you can do to help us and/or give us advise of how to get this problem resolved?

Bottom freezer had frost and water. And ice maker began leaking and ruined the new wood floors that we just had put in. This is the forth whirlpool item I have, either had to have replace or fixed. Emailed and called several times. Customer service is terrible. All products bought within the last five years.

This washing machine is a piece of junk. It broke down exactly 2 days after the one year warranty expired. Home Depot said there was nothing they could do and Whirlpool said the same thing. This washing machine was not used on a weekly basis. It perhaps washed 20 loads during the course of the year. I had many issues with the sensors before it broke down completely. Sometimes, half the clothes would be dry after the entire cycle. I was so angry that I had a local independent contractor come in and look at it. He said the motor was broken and needed to be replaced. So much for $700 down the drain. I will never buy a Whirlpool product again. This was the worst experience Ive ever had with an appliance.

Twice purchased washers Cabrio and both after 5 to 6 years break down showing f1, f2, UL codes. Shame on this company. They refuse to give us a particular time to fix it and have the nerve to charge us for the visit without fixing it first.

Whirlpool Cabrio Platinum Washer - The seal on the top of the drum is breaking down. It is cracking at the bleach and soap dispenser. Somewhere in the washer drum or plate is causing holes and cuts in the clothes. The machine is only 2 years old.

I purchased a Household refrigerator Model WRF535SMBM00 on November 2013 at Home Depot which was not used but until June 2014. Awaiting finishing details on new house closing. The first year in use, I started having problems with freezer frosting, light not working, seemed like the ice produced in it, burned the light bulb. Prior to that sometimes it worked, sometimes it didnt. I started to think that it had burned, changed the light bulb. It didnt worked. After 2 months, all of a sudden the light worked, but the ice maker stopped working. What would be the suggestion to fix it, may I asked. This is very disappointing. You have a new house, and new appliances and they just dont work. And we are expected to pay for the repair! I dont think so.

Whirlpool Cabrio washing machine is less than five years old. First repair was replacement of control panel (under warranty). Second, third and fourth attempts to fix the out-of-balance problem which continually caused the machine to shut down altogether (even a small load) left my repairman totally frustrated after replacing most of the parts, finally telling me it just cant be fixed! What? I paid over $1,000 for this machine in Oct. 2007 and expected it to last many, many years. My mother-in-law has a washing machine she bought used in 1979 and it is still working beautifully. Ive read the 14 pages of complaints on the Consumer Affairs website and agree with Diana in Kissimmee, Fl - I am sick to my stomach not only for Whirlpool not recalling the Cabrio, but for Lowes and Sears and any other supposedly family-friendly business for continuing to sell it! Someone please contact me if you know of a class action suit being filed.

I bought the Whirlpool model e2h50rd045v electric water heater to replace my failing gas water heater on July 21, 2014, and had it installed a couple of weeks later after a little over 3 years of use. The water heater is still working with no issues or major problems. I'm happy with the decision to purchase this water heater.

I had the Whirlpool side by side GSC25C4EYW00 less than a year. The vegetable bin - 2nd from the bottom - front panel broke off. No wonder, there are 2 tabs holding it to the rest of the bin. Its cheap, brittle plastic. Come on, Whirlpool, you have to do better. What a disappointment. Dont buy one.

I purchased a Whirlpool Slide in Range Model WEG750HOHZ on March 23, 2019. After 7 days the oven would start on its own. I contacted Whirlpool Safety Team and they scheduled a service call. The following week the service company came out to tell me the computer that runs the oven needs to be replaced. Yet another week goes by to find out that they are still waiting on parts to come in. I should have demanded a full replacement oven. After spending nearly $2000 on an oven I can’t even use. Will never buy a Whirlpool product again.

I hate hate hate this Whirlpool Washer WTW5000DW1! To put it nicely. This is my first washer without traditional agitator and the sensing feature. I will never again buy a High Efficiency Washer with these features. It constantly gets stuck on sensing! We rearrange the load over and over and it still does not want to work. I have researched the online videos and this is a common problem. I wish I had researched prior to buying this type of machine.

I purchased a refrigerator 7 yrs ago. I paid over $1800 on sale for it. Now it needs repairs, it already cost me $89 just to have the tech look at it and he said it will cost $300 to $500 to fix it on top of the service call and now he informs me that it will take at the very least until February or March before he gets the part. I contacted Whirlpool and they told me there is nothing they can do, just to work the tech and I said so Im supposed to go without a fridge for 3 months and was told sorry for the inconvenience. So Im thinking they sell me their product, take my money, then brush me off when I ask for help. That is piss poor way to do business.

We paid $6,000 over and above my homes purchase price for double ovens that are defective. Whirlpool will not address the problem! When you bake a pie or a turkey, the bottom and center are raw, and the top burns, because the bottom element is hidden under the bottom of the oven, instead of on top of the interior floor area of the oven. Whirlpools new design is defective! The service technician says the oven is performing as designed therefore there is a design defect! However, Whirlpool will not take any action, because the parts are not broken and they send us back to the extended service plan people. It is ridiculous for the consumer to be caught in the middle. Whirlpool does not want to stand by their product.The builder of our home, Coleman Homes in Middleton, ID, purchased the ovens from Whirlpool originally. Therefore Whirlpool says we are not the original purchaser of the product, Coleman Homes are, and Whirlpool cannot do anything because we did not buy the ovens directly from Whirlpool ourselves, Coleman Homes did. The Whirlpool Warranty (waste of money) says they cannot do anything because it is not a parts issue. Coleman Homes says they cannot do anything because the warranty was given to us when we purchased the home. Whirlpool needs to replace the hidden element with a true baking element so the ovens will bake properly!!! Model Number: WOD51EC0AS Serial Number: D52208658

I purchased the Whirlpool Cabrio Top Load Washer in 2009. It stopped working and I found that it needs a new control panel and recirculating pump which will cost $390, including labor (plus the cost of the service call to diagnose the problem). I would not have expected to have this type of problem with a washer within 3 years of purchase. I cannot recommend this machine.

Overall the stove works well but it is horrible to clean. You have to use a lot of muscle to get the spills up from around the burners. It is hard to get around the burners to get all the spots off. The gas burners work well & cook evenly.

I have bought and used other dishwashers (different brands). They lacked quality, quiet operation and efficiently and effectively cleaning dishes, pots and silverware! My Whirlpool dishwasher is far better than all of them. It cleans and makes my dishes sparkle. I would not buy anything but Whirlpool in the future.

Whirlpool Dishwasher model # WDT720PADB. Replaced an old Maytag that was 12 years old; cleaned great but finally the pump gave out. From the first day that we cleaned dishes with the new Whirlpool, the dishes were not as clean as the old Maytag and totally wet even when the heated dry cycle was on. Repeated calls to Whirlpool customer service and two technician visits and still the same results. We end up drying every load by hand. Now after 14 months (two months out of warranty) only the silverware wash jets are working with all other zones inoperative. This machine is a plastic piece of junk and all it takes is one look at the cheap construction and components to say that Whirlpool engineers are competing with the Chinese made brands. This boat anchor is going to the curb tonight! Never again will Whirlpool get my business!

Water heater purchased in 2011 and is already broken. Called the hotline and they were rude. Told me I need a $199 part. I read all the reviews and it seems that Whirlpool has made a bad name for themselves with the water heaters. They were not willing to work with me.

All of sudden without any notice there was such a clatter. We dashed downstairs to see what was the matter. My washer Cabrio was on its side off balance. I hollered what is the matter. We sit it up, see the back side bulge out and with some searching we discovered the balance thingy was broke. Now I bought April 2012 while going through Chemo May 2014. I burying my washing. Call Whirlpool. Well they say I file this away sorry about your luck - lol. Do not buy this washer unless you want another one in two years junk and they will not help. Well they will if you give them more. The 1400 dollars I already gave them for the set is not enough.

The smell from the washer has gotten so bad we have to keep the door closed to our laundry room, or the smell will permeate the whole front part of the house, as it is we have to keep the door to garage which is adjacent to laundry room open to air out laundry room. Our friends and guests, are aways telling us we have water leak or something mildewing, or rotting in our house. The washer works well, and I cant find any buildup. We frequently run it through clean washer cycle, it smells OK for a hour or two, and odor returns!

We have had our range for over one year. The main problem is that the large burners are in the front and the small burners are in the back. This means that when we are using the two front burners we cannot access the rear burners safely. (What country provided the engineering design for this?) One minor problem is that we cannot get used to the burner control arrangement. The outside controls control the front burners and the inside controls control the back burners. Our old range was the right control for the back burner and the left was for the front burner. Another small problem is that there is no back to the pan drawer. So, with the drawer full if a pan move when the drawer is shut it will be scraped off the drawer and fall into the back and becomes hard to reach to remove.

I bought a Whirlpool french door refrigerator, model # ED5LVAXWS about five years ago. I didnt have any problems until last month, on August 25, 2016. The ice dispenser stopped working, and the refrigerator went off. I had to throw out a lot of food. I got a new extended warranty that day, and a serviceman came out the following day, 8/26. It turned out he wasnt a repairman, just someone to diagnosis the problem and order the parts. The part was ordered, and the fridge would be repaired within 5 days, but the part was delayed because of a Hurricane Hermine, which completely understandable.On 9/8 the repairman arrived, but he realized that the original guy who diagnosed the problem was in error. He had ordered a compressor, and what needed to be replaced was the thermostat. As of today, 9/29, the part is still not in -- I was told its on backorder with no ETA. If I didnt have a mini fridge, Id be at a complete loss. I called what I thought was Whirlpool to complain about the part taking so long to arrive, but was told they can do nothing. It turns out that a company called AIG U.S. Warranty Division handles Whirlpools guarantees. I am not a happy camper.

I purchased a Whirlpool side by side refrigerator in Jan 2014. The first thing I noticed was the installers bought the appliance in without a box. The next thing I noticed was the door would not close unless you gave it a big push. While looking around at the hinges, I found 2 hairline cracks at the base of the refrigerator and 2 dents. I called Service and they sent a technician out. The technician told me they are going to want to epoxy this and you will see it. They asked did it get delivered in the box, I said no. I asked why, she said it should have been delivered in the container so you would know that it is new and not a rejected one from a customer. I called Whirlpool to voice my issue with having this epoxied. Kecia was the CSR...she said that is the normal repair for a crack. I told her I had a Kenmore refrigerator for 23 years and it was still functional when I bought this. I replaced it to get the energy savings. I told her I wanted the refrigerator replaced. I told her that the cracks tells a story about the quality of the appliance. I asked her what happens if these cracks expand after the year warranty expires. She said you can buy the extended warranty. I said but the existing warranty will not cover the cracks...what will the the extended warranty do? I asked if there were any recalls...she said no. I asked have there been similar complaints about cracks and dings (not that I thought she would answer yes). She said no unless someone had stepped on the base of it. I told her I lived alone and I definitely did not step on the base of the refrigerator. She got aggravated (almost to the point of being rude) and said Mam, no one said you stood on the base. I asked her repeatedly if there was someone else I could speak with. Her repeated answer was I am authorized to speak with you. She wouldnt let me to speak with anyone else. I am done with Whirlpool and stuck with this substandard refrigerator. Not happy at all in Va.

It is a really great microwave, but the door is falling off of it. We can still use it, but try to be careful about it. I honestly and truthfully love my whirlpool microwave as well as my whole set of whirl pool appliances. The door is trying to fall off, but we can still use the microwave. If we get another one we will probably get another whirlpool because I love it so much.

Its just okay. It doesnt clean as well as I expected to regardless of which dishwasher cleaning brand or type I use. It frequently leaves full residue even if the dishes have been pre-soaked. Even though I have it set to see to it, I feel it leaves too much water on the dishes. It doesnt have a rinse and hold setting. This dishwasher doesnt have any extraordinary features. It just has the features you would expect to find on any dishwasher. The size is average but it handles the amount of dishes I have as a one-person household. Its unobtrusive; nothing sticks out, there is no faux metal on it. Those are all features I like. Its not as quiet as it makes itself out to be. On the whole, I feel this is a very average dishwasher.

Washing clothes is a nightmare. I am constantly removing clothing from the washing machine that have been torn and left with holes. I am utterly frustrated. Because the machine is more than three years old, there has been no solution to my problem. I have now replaced clothing items in excess of $2,000. I am always here that they will send a repairman and yet there is still the problem. This machine is costing me too much money. The newer machines have fixed the problem. There is no gap between the drum and the doorway or rubber piece. I want that piece to stop this nightmare. This machine has taken a dream of mine and demolished the experience. I hate washing clothes but more so having a machine at home and then going to the laundromat to stop the chaos with doing laundry at home.

I would not give this any stars! I purchased a Whirlpool gas range (model #WFG371LVB1) just 2 years ago at Lowe’s. The oven heats up to 475 no matter what temperature it is set at. The Whirlpool authorized service agent said it needed a control board which would cost $650 to install. The repair company found one for less--only $300. After reading all of the other complaints about these ranges, weve decided not to repair it and will probably have to replace it soon. We have been Whirlpool customers for years and will not purchase another Whirlpool product. There should be a recall on any of their products that have these continual problems. The oven cannot be safely used for normal baking.

Whirlpool Cabrio Platinum washing machine: You wont believe this until you call a parts replacement place for tiny part. The plastic (or vinyl) lid hinge bearings are located at hinge corners of lid. Hinge pin passes through them, one on each side. Half the size of a penny, UNCONSCIONABLE greed at the price of $32-$33 dollars EACH when ordered from a parts place. IMHO, design by INTENTIONAL failure to fail after three or four years. As a result, the lid will not stay up on its own. Then you find out the horrible news which is an insult to intelligence. Id have expected to pay maybe two or three dollars each, but NEVER the price they are demanding. Theyve got you and there is NOTHING you can do about it. At that rate, parts would run tens of thousands of dollars to replace the entire machine, part by part. These greedy clowns make car dealers look like reasonable people! The LAST Whirlpool machine of ANY kind we will EVER own!

A-10 error on display ultimately means needs a new pump. The washer (model WFC7500VW 2) is 3 months, 9 days old and is now unusable. I cannot get any service (under 1-year manufacturers warranty) because the sticker inside the door with the model and serial # is missing (i.e., it was sold to me by Homedepot.com without a serial # on the door label, sticker is intact and is brand new and apparently was printed without a serial #).I made multiple calls to Whirlpool in Benton Harbor, Michigan and finally spoke with Courtney (who states she was a supervisor) pretty much said all they will do is to reprint a label from the factory and I should have it in 7-10 business days. They refuse to stand behind their product and authorize timely repair of their product they sold to my without a serial # on the door tag from the factory. I have to wait to schedule factory warranty repair until I get the new label (probably 3 weeks plus without a usable washer). Courtney refused to contact me via email for any of her contact information or to supply verification of conversation or promise of a new factory label. Also, she refused to try to authorize any type of manufacturers warranty to fix the brand new unusable washer!

Leaks water on bottom. Door seal dont go far to under door, is from manufacturing defect, is water overflow or is something else. Dishes washer is about 10 years older. Very real disappointed and wont buy this brand again on dishwashers.

Whirlpool anode rod went bad in 2 months. Called Whirlpool, would not stand behind warranty. Had previous hot water tank (not a Whirlpool) in for 10 years with same well and water conditions. Also noticed Whirlpool hot water tank is not nearly as efficient on energy use. Overall, this is a very poor water heater and even worse customer service to not replace a part that was under warranty.

Kitchen Aid is Whirlpool - Buyer Beware. 1.5 year old dishwasher Model #KUDS35FXSS8 lost power, repairman came and confirmed it to be the panel control and the part is back ordered 4 weeks out. Expected to come day before Thanksgiving, repairman cannot schedule until part arrives thus no guarantee date of fix. Found part online from AppliancePartsPro.com. They shipped it one day later - fixed dishwasher. Whirlpool will not stand behind part because it did not come from them. I have all the proof that it is a Whirlpool Certified Part from a Appliance Parts Pro. Appears Whirlpool would rather have a broken machine in a home rather than help the customer fix it.

We bought the microwave in August 2018 and last week it burned a hole through the turn table which broke it and burned a hole in the floor of the microwave. Whirlpool said it was under warranty but refused to bring a new one. They ordered a new glass turntable and painted the spot that had the hole burned in it. What makes me believe it is safe now to use? What caused a microwave to go awry in the first place. It has to be a safety issue and Whirlpool will do nothing about it. Lousy customer experience.

I bought a Whirlpool fridge. On the 2/29, I called service for Whirlpool on 3/2. No one was able to come out until 3/5. So, I had the inconvenience of food being stored, time away from work, and food spoilage. The fridge was fixed and worked until I wake up today (not even a week) and the freezer is thawing out yet again. Again, I removed food and there’s more spoilage. I’m waiting for service to arrive some time today. I called Whirlpool and there is no compensation of any kind. I’m never buying a Whirlpool product again.

Why does your AquaLift self-clean feature not work? Tried numerous times & have been scrubbing all afternoon... Horrible!!! My last oven (Maytag) self-cleaning feature worked awesome, just had to vacuum out ashes & wipe down with regular soap & water. Have no idea what to do to get this oven cleaned!!! Very frustrated...

I purchased Whirlpool dishwasher, model DU930PWSTO, in 9/2007. It quit working in 5/2012. I expected an appliance made by a reputable manufacturer (Whirlpool) to last longer than five years. It seems like a manufacturing racket where they build these things only to be replaced a short time later. With service calls and parts replacement, its cheaper to buy a new unit. Talk about a circle jerk! And who the heck puts anything else but SS screws in a water soaked appliance? Duh. Rust! Im disgusted and dissatisfied with the whole company. Im still waiting on their response to my complaint email; at the time, the machine quit working. Whatever happened to pride in American made products? Or, did this get company bail and were now slaves to the Chinese junk once again? Ill never buy another Whirlpool appliance again. Does anyone have anything good to say about this company? I wish I would have read this blog before purchase.

I am experiencing problems with keeping my pilot lit too. I checked the screen and this is not the issue. I have just returned from Lowes where I purchased the water heater and they informed me Whirlpool supplied kits for this issue and it was widespread. They mentioned a class action and went on to tell me they and all surrounding Lowes stores are out of the free kit and arent expecting anymore. Am I to feel lucky my water heater water didnt fail sooner only to feel unlucky all of the free repair kits are now gone? Lowes provided me with the Whirlpool phone number for help and they have just informed me it will cost me $35.44 plus shipping. I now see how widespread this problem is. This isnt right. I am very disappointed in the handling of this known problem! What is my next course of action?

I love my glass top stove and glad I purchased it, so much easier to clean, I think they should all be made self-clean on any stove, I did not notice that some dont come with it and some dont. Remember not to start cleaning the top of the stove until you can touch it with your hand.

This is a horrible washing machine. All the clothes (and I mean small loads, medium loads, large loads) come out twisted and so wrinkled. I have never seen anything like it. I dont machine dry many items and so everything not dried that way has to be ironed. Also, there is white residue of some kind left on the clothes so the extra rinse must be used. How is that energy and water-saver sufficient? Again, the government EPA in its brilliance has screwed up another product. It also takes much longer to wash clothes, again, energy efficient? After reading the wasted time on other reviews of talking to Whirlpool, I didnt even bother contacting them. HE front loaders (which we had a Samsung that lasted 1 1/2 years before breaking down) and replaced by this top loading HE, are the worst. Give me back my old fashioned washer.

We bought a Whirlpool French door fridge model WRF989SDAM00 in 2013 and were impressed by how it looked in our kitchen. Its December 2015 and things have started to go wrong. First the freezer stopped freezing items completely and found out that ice had built up on the cooling tubes inside the rear freezer wall. Had to be taken apart and thawed with a heat gun. Now the freezer freezes on and off and the ice maker is not making ice properly and leaking all over the left side of the fridge. Went to Sears {place of purchase} and we were asked immediately if we had purchased the extended warranty. We hadnt and were told Sears could do nothing and that these newer fridges have a tendency to have trouble within the first couple of years and thats why they recommend the extended warranties. Really a $2500 dollar fridge a couple of years? Had a local appliance repairman look at it and he said the compressor was bad. $500.00 to fix. Boy do I regret buying this thing. These big companies just walk all over us consumers.

We have a Whirlpool double oven that is about 3 years old. Today we used the oven for lunch and about 2 hours later we heard a loud sound from the kitchen. When I went to see what had happened I found glass shards all over the kitchen, some as far as 10-12 feet away. The outside glass of the top oven was spider-webbed and had apparently exploded. Nothing had come into contact with the oven and nobody had been in the room with it for over an hour, it just randomly exploded. I am going to contact Whirlpool but judging by the other posts I dont expect much help from them.

I purchased a Whirlpool washing machine from PC Richards in Lake Grove 15 months ago. I paid $590.00. I had to call PC Richards back because it sounded like the machine was not spinning right. The servicemen came back and said nothing was wrong. It was supposed to sound like that. Now the machine stopped draining and spinning. I went to the store and they handed me customer service numbers and said they could not help me. I contacted Whirlpool online and received a phone call from a woman that gave me a lesson on how to load the machine and put soap in it! She was a very polite woman, but, gee, that didn’t solve my problem.After 4 days I was able to get through by phone and was told to call service. I contacted Mahler Appliance. He looked at it and said he couldn’t fix it and took a check for $81.47. He told me to call Whirlpool. I called Whirlpool again and got their service people. The gentleman came and could not figure out what was wrong. He tried a few things and said it was probably the main board. He said to call Whirlpool, but they most likely won’t give me back my money. He could charge me $460.00 for a new board per his supervisor. I just paid $590.00 for the machine and another $87.00 to some guy who took advantage. He left with an $87.00 check and I still have a broken washer. He did tighten up a loose wire he said he found and told me to try it and good luck. So I tried it. I put clothes in and turned it on.I came back about 20 minutes later to see if it continued to run and I slipped and fell on the ceramic floor because water drained out from somewhere and went all over my floor. I have injured my back and elbow from hitting the hard floor. I also have water all over the place and finally a very broken defective washer. I am angry. I hurt myself and have spent close to $1000.00 and I still have no working washer and no way to buy another one. The washer is 15 months old. That’s brand new to me. There was obviously a problem from the beginning. Whirlpool has always had a quality name for years. I would hope that they would stand by their product and fix my washer for me. It is obviously defective.

The refrigerator itself is noisy but thats not the problem. Most of my low ratings are because of the ice maker. Instead of being in the freezer it is up in the refrigerators area. It jams a lot, makes a lot of noise, had to replace the ice maker assy inside it already as it quit. Then the defrost water drain plugged and had to be cleaned out. Too many problems for such a new refrigerator. The refrig. itself works fine but get one with ice maker in the freezer.

2 TOP of the line fridges in 3 years!!! First replaced by company CO after I contacted him with outrage as fridge was nonrepairable at 1.2 years of life. Second diagnosed with similar same issue less than 2 years later on same model fridge. This is a rip-off from the company, absolute nonsense that fridge lasts on average 1.5 years with the price sticker over 2500$... Someone should put them out of business!!! This is scam not fridge!!! Stay away from this company, they are not what they use to be, NAME AND QUALITY IS GONE.

Whirlpool Cabrio TLWasher purchased 2011. Doesnt drain, no spin, inconsistent cycling, poor washing action....wont even attempt to repair, in light of reading product reviews and consumer experiences with this washing machine- $600 junk.

My range is 2 years old. I would never recommend this range. The AquaLift clean is worthless. Can not get the grease splatters off. If I could afford a new one I would get rid of this range. The AquaLift clean feature is only good for small messes on the bottom.

I bought a 5 burner Whirlpool range that I really like except the danger of knobs turning on too easily and releasing gas. You just have to brush up against them lightly and they turn. 3 times my nephew has come into a gas smelling kitchen. Whirlpool sent repairman out. He said they operate properly. Really?? What to do?? Does someone have to die?

My two-year old Whirlpool Duet Front Load washing machine is ripping my familys clothes. When I went online and saw all the other customers with the same issue, I contacted Whirlpool. Although the contact said that he knew I was frustrated, he could do nothing but send a repairman at a cost of $129 for me and then I would also have to pay for parts. I informed him that the online sites are saying that this is just a temporary fix. He pleaded ignorance and could offer me no other alternative. This is the last Whirlpool or Maytag product we will ever buy... and letting others know about the lack of cooperation.

In the last two years I have purchased a new Whirlpool Duet washer and dryer with base, Whirlpool Gold refrigerator, and (less than a year) a built-in Whirlpool microwave. I have already had to replace the gaskets on the washer, which required a $65 deductible. I had to spend $65 on my service contract deductible for my dryer as they have had to order me a new motor and thermostat. My refrigerator had an appliance bulb as required installed; however, it still burns the plastic covering. I have not called on that yet. My microwave, which is less than a year old, has a small crack inside the door and part of the handle has broken off.

I have a brand new Whirlpool washer (Model WFW9640XW). It has been broken for 3 of the five weeks I have owned it. The Whirlpool cusotmer care cannot get me a working part in order to fix the machine. I am being told that I just have to wait until they find the part, with no end in sight. I am held hostage now that they have my money. I am told there is nobody I can talk to to break this impasse.

I purchased this washer model WTW4950XW0 new. Within 6 months, it stopped spinning and was repaired under warranty. The spin actuator was defective. Great. A few months later, it stopped spinning, repaired under warranty and the spin actuator was bad. A few months later it stopped spinning, repaired under warranty, and the actuator was bad. Great. Another few months it stopped spinning again. This time, Whirlpool sent someone to repair it, another bad spin actuator. This time we had to pay for the part. So now that we are completely on our own, it stopped spinning yet again. Let me guess. The spin actuator is bad!!! Incredible. What a piece of crap. This washer was never used heavily.

We bought a new oven/range in April 2019. December 7th 2019 it stopped working. No power at all. We contacted Whirlpool about our unit as it was still under the year warranty. They contacted their local repair company. 3 times they have said they were coming out to fix it and they had the part. Three times they have told us never mind. They didnt have the part and would have to come later. Most recent update, they wont get the part until the 20th and wont make it out until the 23rd. That is over 2 weeks after our unit broke and it is the holidays and we will have family visiting. We have tried to get answers about what is really going on and we keep being told they cant help us or give us any answers. So frustrated. You can bet I will never buy another Whirlpool appliance again!

Washer, barely 6 months old, purchased at Lowes. While my washer cleans and I am happy with it, my washer started making loud noises during the spin cycle. I called Lowes warranty service approx 9/26/13; tech scheduled for 10/8, over a week later. Diagnosis: stripped bearings; total bearings and all tub components must be replaced. Parts ordered to be delivered to my door. Cost of washer: approx $800. Cost of parts: over $1600. Washer cannot be replaced until they have attempted to fix it at least 3 times. Repairman returns on 10/18 to repair. Oops, large plastic tub component shipped broken from manufacturer. Reorder parts for repair on 10/29. Finally a repair BUT A&E left the large tub part saying they had no room to take the part. So now Lowes is trying to arrange to dispose of the huge part sitting in my home. I live in a condo so the part cannot be disposed of in our facility. This has been a nightmare to fix and while customer service was cordial, they were totally unable to provide what is considered excellent customer service. So whose fault is it? I have missed several hours of work to try to get this taken care of. I spent money visiting a laundromat for over a month. I am the customer and guess what that means? Nothing! Now my concern is getting that large part out of my home and whether to buy an extended warranty OR just throw it out if it breaks. Very dissatisfied customer! And no the warranty for this major part overhaul is not a year from installation..... my warranty still starts the day of purchase. Are you serious? My advice: ask your friends about their appliances & esp service if they received it.

My gas range doesnt work all that well. Sometimes the flame catches and lights, sometimes it doesnt. Oven seems to be less than steady in cooking. It is ok, but I wouldnt buy again.