This flat top electric range has a cooktop large enough to accommodate several large cooking pots at the same time and is so easy to clean. A feature I love is the Keep Warm burner. The two front burners have 2 different heating ranges to accommodate small or large pots or pans. The self-cleaning convection oven heats evenly and provides 2 oven racks for maximum use. Whirlpool does it right every time.

This machine is 18 months old. First it failed to drain (LD code). Ran diagnostics and found the drain pump ($60) failed. The Mexican part was replaced with an Italian part. Two weeks later, the infamous F1 code flashed - control board. I sourced a new one. I ran one load and another F1 code is flashing. These are $150 electronic parts. Fuhgetaboutit. Im sending this ** to the dump and going back to electromechanical controls. I had a Maytag that lasted 15 years.

Four years ago, we remodeled our kitchen and purchased the Whirlpool Quiet Partner II dishwasher, with a one-year service warranty. To be fair, we have not had a problem with the operation of the dishwasher, but rather, the quality of the dishwasher. Within the first two years, the front panel of the dishwasher started turning brown and rusting through from the steam escaping the dishwasher. The labels on the operating buttons have peeled off, again, from the heat of the dishwasher. The upright spokes on bottom tray, that hold dishes and etc. in place, started rusting through and breaking off. Guides which allow top drawer to slide in and out and hold drawer in place, have weakened, so drawer is constantly dropping or sagging.I have had other dishwashers that have certainly lasted more than four years but was encouraged by a Home Depot salesman that this was a great machine for the price! I should have paid closer attention to that for the price part. In any event, I called Whirlpools customer service department, believing that in this day and age, SOMETHING could be done to help with these issues and was told, quite succinctly, that there was nothing Whirlpool could do. I asked about standing by the integrity of their product and got no response to that either.I am an associate with American Girl, a company that stands by the quality of its product FOR LIFE. To be told by a customer service rep from a much larger company, that there was nothing they could do to help me, completely blew me away. I have taken pictures that are pretty indicative of the quality of this dishwasher and will be going online to warn other consumers against purchasing Whirlpool products.

My husband and I purchased a Whirlpool Refrigerator, model number GI6SARXXF04, serial number K20311478 on February 3, 2012. It was delivered soon after. In April of 2012 our ice maker quit working. We called The Appliance Doctor for service. They reset the control, and left saying that they thought it was fixed. The ice maker as a result was not fixed. They came out again, and stated that the ice maker needed to be replaced altogether. So they ordered the part and we waited for two weeks for it to arrive and be installed. By this time it was April 23, 2012.Then in June of 2013 we began having water pool in the bottom of the refrigerator and freeze, and water began to leak onto our hardwood floors causing them to buckle. We cleaned it up for a while thinking perhaps something had spilled, and busted up the ice on our own. The beginning of 2014 we called for service from Lanny Adams Appliance. The technician worked on it and stated that something was plugged up in the water line and he thought it was fixed, we paid for this service on our own. On August 14, 2014 we had another technician come out because it was not fixed. The technician came out and stated that it would cost another $219.95. He further stated that he thought that there was a recall of some kind, that I should look into it. I did look into it and printed out the Technical Service Pointer that was produced in November of 2013. When I called Whirlpool at that point, someone was sent to fix it. Of course I had already paid to have it repaired in February of 2014, Whirlpool stated that it was not their responsibility, which again it was not fixed until August of 2014. As a further note, my floors were never fixed because I have hardwood floors throughout my house and simply cannot fix the area in front of the refrigerator. My floor had just been refinished, and after speaking with the floor company that had just refinished my floors a few months earlier, they stated all of the floors would have to be redone or it would not match. Figuring Whirlpool is definitely not going to pay for that, I have just dealt with it, since it cost me over $3000.00 to have the floors refinished.Now, it is February of 2015 and the whole refrigerator is not cooling, and the freezer is not freezing. Again, I woke up to water in the floor on my hardwood floors, and have had to move all of my food to my ten year old Frigidaire refrigerator that is in my basement and has NEVER had a service call. After speaking with service company, they state it will cost $1200.00 to fix the refrigerator....REALLY? So, now I get to go spend a lot more money for a new appliance. You can bet it WILL NOT be a Whirlpool!I contacted Whirlpool again, and I spoke with Robin in your Customer Service Department after speaking with one of your Customer Service Representatives that stated I was basically on my own with the repairs. Robin stated that there was nothing Whirlpool would do, but she would agree to pay for parts and I will be left with the repair labor. Although your company may think that this is good customer service, I have to disagree given the fact that I have had nothing but consistent problems with the refrigerator since I bought it. At this point, I would like to ask you if in your opinion this is a good appliance? I asked Robin and she stated that I needed to buy an extended warranty. Dont you realize it isnt about the warranty? It is about the fact that I have had the appliance for 3 years and have had consistent problems. I believe the refrigerator is a lemon, and I would like it replaced.I have always trusted the Whirlpool name, but at this point, I do not see myself buying another Whirlpool appliance.

I have owned this Whirlpool Cabrio machine and dryer for almost 5 years. It has been a nightmare. I am forever getting it fix. Now its the notorious LD light, not draining, and it has actually drained, and the company I bought it from does not repair them due to so many problems. Got a plumber to look at it and got it to work.. This is after the company came, charged me 130.00 to tell me they dont repair it. I bought this machine because it was large and I have a big family, energy saver (no, it did not save as much as they claimed) and uses less water. The dryer is wonderful. But the 1900.00 I paid for them was not worth the price. I now have to go up and down my cellar stairs 6 times per wash to stop it, shake the hose, and restart it. A load of laundry takes close to 3 hours due to starting it over. I am gonna buy a Maytag which I use to have and take this to the junkyard. Thanks a ton, Whirlpool and I read all comments and they are ALL true.

I have a pretty small refrigerator since I live in a condo. It has lasted me about 4 years and is still running very well. It is very easy to clean. I dont buy a whole lot of food at one time. The size is big enough to hold what I buy every week. The appearance is decent. Only two people use it every day. I havent had any problems with the refrigerator in the four years I have had it. I get frustrated sometimes when opening up the bottom storage container. If I pull it out too far, it falls to the floor. This happens especially when the container is full of fruits and vegetables. I guess bottom storage container was designed that way for easy removal to be cleaned. I really like the adjustable shelves. I can adjust them perfectly to store food containers and jugs of milk and other drinks. I like the door shelves in the freezer compartment. It is great for small packages of vegetables.

Whirlpool is one of the best appliances I have ever used. They last for years and the self clean ovens come in handy. I’m not to big on the electric stoves, but they are also amazing. Almost everyone in my family use Whirlpool, and we all love the stove and refrigerator. It is definitely a wonderful product.

We purchased our side by side refrigerator from Lowes. When it was delivered, we noticed the freezer door was rubbing on the ice maker and would not close properly. The refrigerator was replaced. Then about 10 months later, the water dispenser stopped working. Service came out and said the water line had ice in it (we do not keep the freezer on high). They replaced the water line in the door. About 6 months later, after the unit was out of warranty, the same thing happened. We called Whirlpool and they said there was nothing they could do, because the unit was out of warranty. I cleaned out the water line tubing myself and the unit worked again, but the problem occurred again several months later and it does not seem right that the water dispenser line should keep freezing up. In addition, every two months we have to take the ice maker apart because the ice will no longer dispense because of an ice buildup in the ice cube container. We used to think that Whirlpool made reliable products, but with these problems and Whirlpools unwillingness to correct the problem, we will never buy their products again. They have lost a long time customer because of their products now and their customer support.

I feel as though they could use some additional features, it’s also hard to change out some of the wiring in the back. I’ve had some issues with smells coming from the washers as well from them. Hopefully they can start to look into tweaking smaller details to improve the overall machine.

My washing machine is just over a year old and it has ruined so many clothes... They come out with brown stains on them... Almost like a oily stain. Not sure where its coming from but its either Im gonna have to buy a different machine or keep buying clothes. My husbands t-shirts look terrible... If any suggestions to what it can be please respond back to me. Thanks. Model# wtw4815ewo. Serial# c51433710.

My first time with Whirlpool (Always had GE) but at the suggestion of our builder, we went with Whirlpool and the stainless steel is horrendous. Nothing will clean it or make it look STAINLESS. My refrigerator, dishwasher, double oven, tall vent all look terrible no matter what I use! I have never had this problem before. Im embarrassed to have anyone go into my kitchen...

I have purchased Whirlpool refrigerator 2 years back. Suddenly my refrigerator stop working. When I filled complaint against this in customer service care. They sent technician. He told its compressor not working and asked 2800 rs for gas filling. Then he said hell come tomorrow for this. For 4 days he didnt come. After 20 calls, to customer service centre they said, Your refrigerator has to sent to the center. For that they asked 1000 rs... We were so disturbed by their slow service. We immediately said yes. Now when our refrigerator arrived at their center. Now they are again asking for 3400 rs for other part. Im so frustrated by this service. What type of warranty you are giving.. The warranty is of just the box.... So bad products. Such a bad experience... Never gonna buy Whirlpool product again or recommend anyone.

I bought a house and for the first time in my life, I was able to afford and buy all new Whirlpool appliances at Sears. I worked so hard all my life and was so happy I could get new appliances when I was almost 50 years old. Up until then, I could only afford to get used appliances. Even then I had to finance them with a credit card, only to be so sad and disappointed. They are without a doubt the ** junk I have ever had. I wish I could have all my old appliances back. My new Whirlpool flat top oven burns everything and has ruined all my pots and pans. I do canning every year and it has ruined my very old and heavy pressure cookers. Even when you turn the heat all the way to low, it burns everything. I called the manufacturer and they say they do not have to disclose that it will ruin your pressure cookers or burn everything. I am very angry I bought any Whirlpool appliances. I also got a new washer and dryer; they are junk too. They dont clean my clothes like my old washer and everything is so wrinkled up when it comes out of the dryer. I need to iron everything. I have never seen anything like it. I also bought a Whirlpool hot water tank that has now gone out 2 times in 5 years because the thermostat burns out. I pray it doesnt burn my house down one of these days. One of the times it went out, I was about 10 feet away from it and it literally blew up and about gave me a heart attack. It was so loud and scared the bejezzers out of me. Whirlpool, you suck. I have told everyone I can tell how much junk your appliances are. Your company should have to be accountable for selling people such **! I would sure like to be paid not only for the cost of these junky appliances but also all my quality pressure cookers, ruined clothes and distress this has caused me. They have no consequences. They have gotten away with ripping people off and giving a lot of us tons of stress, stress, stress, and anxiety, not to mention all the financial cost. Thanks, Whirlpool, you piece of junk! I think if I had not worked so hard to finally get what I thought at the time were high quality new appliances, I wouldnt be so affected but I dont have the money now to get new quality appliances. Whirlpool took my hard earned money for their junk.

We have several Whirlpool products in our home currently and have been very satisfied with their performances. We have their fridge, stove/oven, microwave and dishwasher, all of various ages. We purchased them from a local big box building supply company and installed them our self. The installation directions are clear and simply for the average D-I-Yer. We would recommend Whirlpool to everyone shopping for these home appliances.

I am not satisfied with your customer service, as my microwave is not working from last 4 or 5 months but no one cares for it. I did complain again and again but your engineers do not have the skill to solve customers problem, then why you say that you are a number 1 company in the world. From my point of view if someone will ask me for you to provide service, I will never recommend you.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

I purchased a Cabrio washer and dryer in 2011 and sold it in 2012 for half the price. I was tired of my clothes not being cleaned. My husband and I work in an office environment so our clothes do not get real dirty. On the other hand, we do work around the house and garden. When I put black pants in the washer, then take them out, they look clean because the mud is still wet. When I take them out of the dryer, it is dry mud. I called the company and they said get someone in our area to come in and see if anything is wrong. Yep, they came in, charged me $150 and said that nothing is wrong; they cannot find one thing wrong. I used the washer for about another 6 months and thought, This is crazy! My towels, bedding, nothing is clean. I then sold it for half price and I am now using a totally different brand. I will never purchase a Whirlpool again!

This washing machine started giving us trouble just a few months after purchasing. Have had repairman to our home 5 times in 3 years. Last time repairman came he said future repairs would be very expensive & we should purchase another machine. Whirlpool will not have my confidence again unless they recall this machine & fix all problems.

My washing machine ruined clothes with tiny rips. Small rubber pieces appeared in clothes. This happened during warranty but Whirlpool would do nothing. Finally, the bellow completely broke apart after 13 months. Repairman could not determine problem until this time. Whirlpool would do nothing.

Whirl Pool Duet Wash WFW9400SW - I had this washer for 5-1/2 years. I use it about 3 times a month. Warranty ran out this last February. Machine stopped working. Called tech and he came and said I need a new console and power board. Two weeks later I get told they dont make it anymore and sorry about your luck. I used this washer under 200 times in 5 and half years. Whirlpool offered nothing and I will never buy a Whirlpool product again.

Whirlpool Gold French Door - I purchased this fridge in Aug. 2009 (model GX2FHDXVQ00 22cu. ft. French door with bottom freezer). Paid 1800.00. The fridge stopped working after 5 years, but the freezer works fine. A fridge should last at least 10 years. I wont buy another Whirlpool appliance! JUNK!

Whirlpool, shame on you! I purchased my Whirlpool Cabrio pair from Best Buy in 2008. Ive had repair technician after repair technician out over 7 times! The washing machine must have been designed by a 3-year-old! Whirlpool, youre getting greedy and youre making your products CHEAP! I know this is fact, I have a 15-year-old side by side in my garage made by Whirlpool and it works great! Fire your 3-year-old designer! I will NEVER buy Whirlpool again! After all said and done, this pair has cost me total purchase and repairs over $4,000! And Now my bearings are bad! Thank God for YouTube! Im fixing it myself this time!

I purchased a high-end Whirlpool dishwasher (WDT710PAYM) a few months ago thinking I was making a wise upgrade. Poor design and it wont dry dishes or properly wash utensils when theyre placed in the utensil rack on the door panel. The unit heavily condenses after using heat dry mode and large water droplets completely cover the top of the inside cabinet. Eventually, they all fall down into the dishes and you now have wet dishes again. The Whirlpool tech’s response was to scratch the cabinet plastic with a scratchy pad, smear rinse aid over the plastic cabinet and that should stop droplets from forming. Whirlpool’s customer service told me they shouldve never told me that and what I should do is be there during the drying cycle and open the cabinet door to let the steam out. This is completely ludicrous. Dont walk but run away from Whirlpool products.

On October 21st 2011, Michael sent their technician, Steve, to my residence to check my washing machine. I was in the house the whole duration of his visit. After testing he concluded that the control board of my machine is faulty. Although he brought with him his own control board but he never showed me my machine working when he installed his control board, even though I was in the house at the time. With my lack of knowledge at the time, I missed requesting that he show me the machine working with his control board. But he should have involved me in the diagnosis since I was just home and should have been his initiative. Anyway, Steve then said that the total cost of the control board plus service is $194.03 on top of the diagnosis fee of $81.19. I was taken aback with the cost since working used washing machine on Craigslist just cost $150. So I said I can only pay him for his diagnosis of $81.19 by personal check. He issued me an invoice with account number **. I also thought that I also could get a cheaper control board online which I did. Also, I know I have the right not to purchase control board from them as long as the diagnosis was accurate since I paid for it. So I ordered a control board from ApplianceZone.com and also chatted with a technician named Kelly. Based on the symptoms I related to her, Kelly confidently said that the issue is not with the control board but the Control panel is the one that is faulty. Kellys diagnosis was different from Steves but since Steve has personally checked my machine, I decided to purchase a control board. When the board arrived on Octpber 25th, I immediately installed it as its easy to install since I followed simple instructions how to install it myself. But when I installed the new control board it manifested the same issue as the original part.. So I called Steve over the phone and he said the new control board.I purchased also faulty and that I have to replace it which I did. Then the second new control board arrived on November 8th and when I installed it, exactly same issue again manifested. That was then I suspected probably Steve misdiagnosed my Washing Machine. So I tried calling Depew the same day but wasnt able to reach Steve. Instead another guy named Kenneth answered the phone. He said that Steve has the right diagnosis but I insisted that I recalled Steve never showed me the washing machine working with his control board installed so Im doubting he got the correct diagnosis. Since it wasnt helping me at all, I decided to visit personally their store on November 8,th 2011 at 5933 Burnet Rd Austin TX, to request an audience with their manager. Then I met the manager named Michael ** who I believe is also the owner of the company. After introducing myself and explained the issue and told him that I wasnt satisfied with the service rendered by Steve because with two new control boards why is my machine still not working so I believe Steve got an incorrect diagnosis. I was a dissatisfied customer and I was hoping they would find a way to help me since I already paid them $81.19 but to my surprise, this Michael ** was so rude, his response was We have done our job, you are on your own now. We dont need your business. Good Bye I said Is this how you treat your customers? he answered me This is how I treat you.. I felt discriminated and insulted by his unprofessionalism. I couldnt imagine an owner of a business treating a customer like that. Before I left, I told him that I will report him to Whirlpool since they referred Depew to me and I would also report to the Texas Attorney General. He just said Go ahead and do what you want to do. We have nothing to do with you; I couldnt believe we have a business owner like this here in Austin TX. I really appreciate you helping me with this issue with Depew Appliance especially with this issue with their manager Michael Depew. I also demand refund of $81.19 for the diagnosis as they dont deserve to be paid and also they should pay me the cost of the control board $85.13. Lastly, I like to request that whatever license this company is holding must be reviewed as his dealing with me as customer is nothing short of discriminatory.

My last fridge leaked all over the floor. Mice were living in it also roaches. My landlord didnt believe me though Ive shown him several times. He didnt want to spend the money. Luckily his wife came over and saw how bad it was so she got a new refrigerator for me and it has been a blessing ever since. It is just the right size for my apartment.

My wife and I purchased the Whirlpool French Door Bottom Mount Refrigerator in April 2013. Thank God we purchased the extended warranty. In June 2014 the ice maker quit working and delivering water. We have had the service contractor that WHIRLPOOL has qualified for all repairs. They have set up FIVE appointments to resolve the issue, all of which I had to leave work to meet because they do not provide any scheduled service outside the hours of 8am to 4pm. The first time they came the service man told me that WHIRLPOOL RECOGNIZES THERE IS A DESIGN FLAW BECAUSE THESE ARE NOTORIOUS FOR FREEZING UP AND NOT WORKING. I asked the repair man if there has been a recall because of this, he said no because WHIRLPOOL WILL JUST REPAIR THE ONES PEOPLE COMPLAIN ABOUT! I called Whirlpool headquarters today. The advisor said he will register my complaint. I asked, Is that it? What does that mean? He said, I cant tell you what happens after I register the complaint. I WILL NEVER PURCHASE ANOTHER WHIRLPOOL PRODUCT. I hope this may help someone NOT make the same mistake. If you need to talk to someone in upper level management to discuss your issue, forget it...they want the position but no accountability.

Had washers model # WTW8500DCO repaired after being install for 14 days. Have had washers repaired every 90 plus days because of constant electrical and mechanical failures. Would not ever buying another whirlpool appliance to my worst enemy. Customer service is a total failure. If you ask a question after talking with you for 5-8 minutes and they dont have an answer they start saying HELLO, HELLO? I have to hang up. I cant hear you. Just a really sad business. Stay away!

We have had a Whirlpool dishwasher for about 2.5 years and have been happy with how it cleans dishes. About a year ago we replaced our counter top and in the process had to adjust the bend in the mountain brackets that attach the dishwasher to the underside of the counter. This requires flexing the thin piece of aluminum at the perforated line. In the process, one of the brackets snapped. The other was barely still intact and broke several months later. I tried jerry-rigging them, but eventually decided to replace them and called Whirlpool customer service to ask for replacement parts.Unfortunately, Whirlpool wanted to charge me $10.50 apiece and another $9.00 for shipping and handling. These parts could not cost more than a few cents apiece. I was shocked that they would charge me $30.00 to replace these flawed parts. Never have I had such and experience with any customer service department. The three people I spoke with were all rude and unapologetic about my situation. Two blamed it on the install...Ive installed plenty of dishwashers and never had any problems in the past. Even if it was a failure on my behalf, the simple replacement of the parts for a reasonable charge would have been fine by me. I told them Id be happy to pay a few dollars and to pay the full shipping fee (which was also high, in my opinion), but they refused to meet me halfway. I can only think that this is part of their business plan...make dishwashers with sub-par parts, and then over charge for the replacement parts when they fail. Well, I re-upped my jerry-rigging efforts and have improved the engineering of the faulty part. Save my $30. But Whirlpool will never again get my business and Ill be sure to steer clients and friends away from this brand as well.

The dryer is okay but the washer is no good. Doesnt save water because clothes have to be washed twice. Sometimes thrice to get them clean. Cycles are longer therefore more energy used. More water, more time, more energy. Terrible design. Useless piece of junk.

My Whirlpool washer broke down on July 06, 2014. I contacted the local supplier (Unicomer Trinidad) on July 07, 2014. Their technician came on July 10, 2014. He said that he will have to check and see if they have the part that is needed to repair the machine, they will contact me the next day. No one contacted me. I called on July 14, 2014. I was told that they do not have the part and it has to be order. It will take about 2 weeks for it to reach them, no one contacted me since. I contacted them (Unicomer Trinidad) on August 04, 2014. I was told that they do not have the part and it will take 2-3 weeks to reach them. I did filled out a form on the Whirlpool support site about 2 weeks ago but no one contacted me. I contacting Whirlpool US HQ by telephone, they gave me a number for Whirlpool Florida. I was told that they are responsible for my area but when I try calling the number, it was out of service. When I contacted back Whirlpool US HQ, I was told that they cannot help me check the website for the local representative which I could not find. This washing machine is 10 months old plus I took the extended warranty. It is a Duet WFW94HEXL2 washer.

Our recently purchased stove top is an average appliance. The surface is easily scratched just from paper towels when cleaning. Today for no apparent reason the igniters all started firing and continued for a good hour....I would definitely investigate other brands before purchasing again.

Clothes never feel clean, feel gritty and linty. See grit in dryer lint container all times after drying clothes. Always use extra rinse to no avail. Worst machine I have ever used in my 82 years. Now itching all over my body.

Not completely happy with my purchase of the Whirlpool Gold Series refrigerator I just paid off this month. Have had the refrigerator for one year. To be as large as it is, it really doesnt seem to be able to hold that much food. The refrigerator is on the top and the freezer is on the bottom. We began having issues with the ice in the ice maker becoming frozen together and forming clumps of ice. The ice felt damp to the touch rather than feeling completely frozen. We called the manufacturer and they said to be sure the vents in the freezer section were not blocked by food. So you have to be sure to load the freezer so that food doesnt block the vents. Additionally, when filling your glass with ice from the door, unless you are EXTREMELY careful, all of the ice will not go into the glass but spill out onto the floor. Weve had the refrigerator for one year and I still have ice coming out that doesnt make it into the glass. It is not user friendly at all. One last thing - the refrigerator has double doors and to get to the section of the middle pull out drawer, you have to open both of the double doors, letting out a lot of the cold air. For the expense of this particular refrigerator I would not recommend purchasing it. My last refrigerator was a Whirlpool as well. It lasted 17 years and I was very happy with it. This Gold Series was supposed to be a step up, but I feel it was a step down.

Thank God for this website and Frank of Dover (postings on Feb. 11, 2013 and Jan. 7, 2011). We just had exactly the same horrid experience with the lid on our Whirlpool Cabrio Washer WTW7800XW. Just as with Frank, our home warranty provider first accused us of abusing the machine. I merely printed out Franks comments and description, whereupon the home warranty provider reluctantly agreed to replace the lid. We also bought an extra lid and are keeping it in our attic for the next failure. Do not purchase this washer!

I purchased a Whirpool fridge five years ago. To date it has had 7 repairs. The latest round has lasted over five weeks and the expensive warranty I also bought is about to run out. The repair man is on his third repair and I havent had refrigeration for five weeks. In the meantime they wont replace the fridge, and it takes two weeks between scheduled visits by the authorized repair man.

We purchased a Whirlpool gas range at Home Depot. After less than 2 years the oven would cut off and the time would start flashing. Check on other peoples problems and found out that I was not the only one. Called Whirlpool and the man on the phone told me I could have a problem with the circuit board. Said he could sell me a 1-year warranty to cover service and parts. I think the best thing to do is to buy another oven and not spend any more money on this junk. Never again will I buy Whirlpool or buy appliances from Home Depot

I bought a dishwasher with a 5 year warranty. It broke just after one year of purchase and they are giving me the runaround with replacing after finding that the part the part needed to repair machine is no longer available. The warranty clearly states that they will repair or replace with same or comparable machine and they are refusing to do so. I am at my wits end and I have no one to turn to within Whirlpool as they say it is their decision how they want to handle warranty.

I used my self cleaning oven feature and the fuse blew, leaving my oven with no electric current. I had to replace the fuse at a cost of almost $300 two months after the one year warranty of the oven expired. The technician suggested I no longer use the self cleaning feature since it will continue to melt the fuse wire. The oven becomes too hot, so I have an oven that I paid for with a feature I cannot use. I would not recommend this product.

This is the only time in my life when I have seen a Microwave behave so badly (and one that is relatively expensive). The microwave is defective out of the box. Seems like there is a comWhirlpool MWA269 (4You)mon trend with Whirlpool products and cheap Chinese boards. The microwave never stops working once the timer runs out. It will just keep going. Model is Whirlpool MWA269 (4You).

August 15, 2011 - We purchased a new Whirlpool Water Heater Model N50T61-403 for $398 from Lowes. We used their recommended installer (that was our first mistake!). He made the following installation mistakes: 1. He connected the hot water to the cold water & the cold water to the hot water. 2. He installed DRYER venting instead of HVAC venting. 3. He used flammable tape on the venting instead of screws. 4. He had incompatible metals touching near the gas line which can create an electrical charge & thus, a sparking situation. 5. He left us with a gas leak. 6. He did not install the screen that is supposed to surround the base of the water heater.7. He failed to strap down the expansion tank.These failures were discovered by an HVAC person who was in our basement to give an estimate on a replacement of the furnace & AC coil at the same time this genius was installing our water heater. The installer overheard the comments & literally... he disappeared & we never saw him again! We told all of this to Lowes & they were not phased in the least -- indeed, they didnt even seem surprised! They sent out a few other guys from the same company to correct the errors. So, it finally was installed & passed the county inspection & we had hot water again... for a little while. Within a few months the water heater pilot light would not stay lit. I was having to relight it once a week or so. After much arm twisting, we were finally able to get Whirlpool to send out a new pilot light assembly and pay for the installation. It was installed July 25, 2012. And.... it worked for 8 months. After returning from a trip on April 30, 2013, we went to take showers & the water was cold. The same problem was happening again... The pilot light had gone out while we were out of town & it will not stay lit & I have to relight it every 2-3 days.We talked to an assistant manager at the Lowes store where it was purchased. He talked to Whirlpool & Whirlpool said they would pay for the parts but not the service call which would be $149. I also learned today from the same manager that Whirlpool will not replace the product until they have replaced the same parts three times. Hmmmm.... Lets do some basic math here. $149 x 3 = $447! Thats MORE than the water heater cost! We believe that the water heater has been defective from day one & we also contend that their replacement part for the pilot light assembly is also defective (by design??). A pilot light assembly should last longer than 8 months!We are getting ready to build a new home within the next year. We will get to choose our supplier & the manufacturer of the appliances that will be in our home. Needless to say, Lowes will not be on the list. They keep saying, Our hands are tied. (Not buying it!) And Whirlpool will definitely be off of our list as their customer service is the worst Ive ever seen & their product quality is sub par. The other thing I experienced with Lowes was that when I tried to leave a review on their site for this specific product... twice... both reviews were rejected. The reviews presented the facts as Ive stated here, but because they showed Lowes & Whirlpool in a negative light, they were not posted on lowes.com. So, consumer beware -- their reviews are heavily screened so that the negative reviews rarely get posted. The consumer should be aware that the reviews on Lowes website are heavily screened & therefore do not equally represent consumers who have had a negative experience. This is an integrity issue.

My washing machine quit working with one month left on the warranty. In trying to schedule repair I was never able to talk to a live person. Via chat and online scheduling they could not or would not come out for 10 days. Also they would not approve use of a local repairman who was willing to work on it in 2 days. Waiting 10 days for service on a washing machine is crazy.

We have had our range for over one year. The main problem is that the large burners are in the front and the small burners are in the back. This means that when we are using the two front burners we cannot access the rear burners safely. (What country provided the engineering design for this?) One minor problem is that we cannot get used to the burner control arrangement. The outside controls control the front burners and the inside controls control the back burners. Our old range was the right control for the back burner and the left was for the front burner. Another small problem is that there is no back to the pan drawer. So, with the drawer full if a pan move when the drawer is shut it will be scraped off the drawer and fall into the back and becomes hard to reach to remove.

We have had this dishwasher since 1983 and we still run it on an average of 6 days a week. Features are the fact that it has given all of our dishes, our silverware, our pots and pans sparkling clean looks for all those years. It fits nicely into the kitchen space which was designed for a dishwasher. It never needed a repair. After all those years, this machine still looks fine. After all those years I really doubt if it still has a warranty and it never needed service.

I purchased this Whirlpool Cabrio washer three months ago from hhgregg. If I hit the lottery, the first thing Im going to do is take it to the dump and buy a new washer. There is no way to wash a load of towels in this machine. I started a load at 7:35 this morning and it is now 9:53 and Im still dealing with the drain and spin cycles. Over and over, I try to get it to spin out enough water that I can put the towels in the dryer. I should have suspected something when I saw that the washer even had a separate drain and spin cycle. It should have told me something. Its a piece of junk. Never again. Im back to Kenmore.

I have a one year old Whirlpool refrigerator which was fine for 6 months. Since then it has been a nightmare. If Lowe’s had not intervened on my behalf, I never would have gotten service. Have had at least 6 service calls, 2 new ice makers and various other parts. It should be bright yellow.

We bought an 80 gallon lifetime warranty electric water heater. We get about 20 minutes of hot water and then cold water. Weve had 2 plumbers out and checked our system and said it has to be the water heater, but they dont want to mess with it in case it voids the warranty. Fine. We called Whirlpool and since the alarm system isnt indicating an issue, they say its not the water heater. We now have to do a diagnostic ourselves to find out if it is the water heater. What? It has a warranty! We are not plumbers! How come Whirlpool doesnt think its their equipment? Weve already had ours checked and it isnt us! So frustrating and we will not buy another whirlpool product again! Not good customer service to promote repeat buyers. Whirlpool, shame on you.

Purchased a Cabrio Top Loading Washer and Dryer 3 years ago from Lowes and our clothes have NEVER even come close to coming clean without spending a ton on stain removing aids, which only work part time. So I approached the salesperson at Lowes and I was informed (after the fact) that the Cabrio top loaders had poor ratings due to the fact the basket only spun 30 times a minute whereas the front loaders spun 300 times a minute. So after 3 years Im forced to bite the bullet and purchase another washer. Ever since they purchased Maytag, their quality control has gone down the crapper. Now Im going back to the old reliable, the agitator washer. Newer is not better in this case.

I have on more than one occasion and with small or normal loads had the washer stop and will not drain. My landlord says he bought the washer 2 years ago and it is my fault the washer wont drain. I read the instructions and can manually drain it but I shouldnt have to do this every time I wash. This has happened 5 times now and I am considering moving because of it since my landlord wont call a repairman to get it fixed.

I bought this Whirlpool Cabrio washer three and 1/2 years ago and the assembly which is basically the transmission and the assembly which is the agitator is out! Needs replaced! This is complete crap! The new parts will costs over $500 bucks plus labor! Ridiculous! My last washer which was a Maytag lasted me 20 years! What a piece of junk! Now I have to. It a new washer! No thanks to you Whirlpool! I will never buy another Whirlpool appliance again! Neither will my family or friends!

I purchased a Whirlpool side by side refrigerator in Jan 2014. The first thing I noticed was the installers bought the appliance in without a box. The next thing I noticed was the door would not close unless you gave it a big push. While looking around at the hinges, I found 2 hairline cracks at the base of the refrigerator and 2 dents. I called Service and they sent a technician out. The technician told me they are going to want to epoxy this and you will see it. They asked did it get delivered in the box, I said no. I asked why, she said it should have been delivered in the container so you would know that it is new and not a rejected one from a customer. I called Whirlpool to voice my issue with having this epoxied. Kecia was the CSR...she said that is the normal repair for a crack. I told her I had a Kenmore refrigerator for 23 years and it was still functional when I bought this. I replaced it to get the energy savings. I told her I wanted the refrigerator replaced. I told her that the cracks tells a story about the quality of the appliance. I asked her what happens if these cracks expand after the year warranty expires. She said you can buy the extended warranty. I said but the existing warranty will not cover the cracks...what will the the extended warranty do? I asked if there were any recalls...she said no. I asked have there been similar complaints about cracks and dings (not that I thought she would answer yes). She said no unless someone had stepped on the base of it. I told her I lived alone and I definitely did not step on the base of the refrigerator. She got aggravated (almost to the point of being rude) and said Mam, no one said you stood on the base. I asked her repeatedly if there was someone else I could speak with. Her repeated answer was I am authorized to speak with you. She wouldnt let me to speak with anyone else. I am done with Whirlpool and stuck with this substandard refrigerator. Not happy at all in Va.

I purchased a Whirlpool refrigerator on 12-26-14 for approximately $2000.00. I was happy as a clam. On May 22, 2015 it died. No freezer or refrigerator. I called Whirlpool because I had a warranty, or so I thought. The Whirlpool representative was less than helpful, couldnt send a repair man until May 27th. When I told her that that date was unacceptable her response was well I could buy a new refrigerator. To say I was upset is an understatement. Everything in the freezer thawed of course and I cooked for 12 hours trying to save something and gave away all I could and filled the garbage can with the rest. I lost over a thousand dollars in food. Apparently my call to Whirlpool generated a survey sent to me and I filled it out with malice. Whirlpool called me regarding the survey and said they were sorry about the refrigerator but the appliance repair person would be there on the 26th, and oh by the way will you do another survey about their response to my concerns? I was not very lady like when I told them no. So here we are on the 26th and Ive gotten a robo call saying the appliance repair man would be here between 2 and 5pm on the 26th. That repair man showed up @ 4:45pm. He never looked at the refrigerator. I told him exactly what had happened and what noises the refrigerator was making. He promptly picked up his laptop and said I will turn the report in and their office would call me tomorrow to schedule a repair man to come and fix it. Needless to say I was livid and told him that I had been led to believe that the refrigerator would be fixed by him that day. He promptly left right after he gave me his business card. So here we are on the 28th and no one from that company or Whirlpool has contacted me about when repairs will be made. I have never been this upset or angry in my life. I have a worthless piece of junk sitting in my kitchen. Ive lost thousands of dollars. I had saved that money to buy a new refrigerator and Im not a rich person. In fact, I am a retired nurse living on social security and all I want is a working refrigerator that Ive already paid for. Apparently Whirlpool could care less. Im at my wits end as to what to do next. Of course I will call the appliance repair company tomorrow to see if they are going to fix it. I hold out no hope that it will be repaired. And yes, Im tired of buying ice.

A little over one year ago, I bought this model from Lowes. Shortly after installation, the ceramic coating on the floor of the bottom oven cracked and shattered. I contacted Lowes... No help whatsoever. I then fought with Whirlpool for weeks until they agreed to replace the unit. Seven months later, the floor of the bottom oven, once again, cracked and shattered. I am now in another dogfight with Whirlpool. This appliance is garbage and Whirlpool does not stand by their product. Do not buy any Double Ovens from Whirlpool. My next step is to organize a class action lawsuit.

I bought my Whirlpool Cabrio Washing Machine in 2010. I hate it 100%. I have never used bleach in the machine. I use liquid detergent only. 2 things happen every day: #1: When I wash a load of colors, I take them out when complete and there is dry white powder like substance over the black clothes. It looks dirty but it just got washed. #2 About once a week, I will pull something out of the washer and there is a bleach spot on it. The last item that this happened to was a $200 sweater. It went in the garbage. This should never of happened with an $800 washing machine.

With the many selection to dry your clothes accordingly to your load, 9 times out of 10 all clothes are dry. Ive used every cycle there is too often so that I could get a better trusted value. Also it removes more lint than any other brand that I could think of.

Whirlpool washer WTW7800 Cabrio - I bought this machine in Oct 2010 for $900.00. This October, the lid started not closing. Next thing I know, the glass is popping out. After waiting on hold for 20 minutes, I was told there is nothing they could do but refer me to a repairman at a cost of $179. The glass is popping out. This is a defect not caused by washing clothes but poor workmanship. I am on hold again. I am calling channel 3 news to do a story and will not stop until it is fixed.

I have Whirlpool Gold washer and dryer and microwave. All handles and grills and trays have broken. What a disappointment ! Their top of the line? We, at this house, will always avoid buying anything from crap pool gold!! Its a disgrace the way they make these things. And the support sucks!

I bought it on 11-24 13. I called Whirlpool on 1-29-13 and got no response. I called 3 or 4 times and still havent heard from them. Its now 4-1-13 and still nothing. I tried many times and got the runaround from them. They owe me money for repairs to the heater. I will not ever buy from them again. Just thought you all should know about this.

Have to keep coins collecting in pump and ruins pump or starts leaking. I feel there is another way it could be solved. I spent enough for this washer. Now I fix that. Now it leaks on discharge hose. Hard to stop it. Like old washer worked lot better all round. Never had that trouble. 4yrs old 1,200.00 plus cost sending somebody out to fix it. Crazy! This happen more than one time with this machine. Thank you.

Ive had this microwave for about a year and a half. Like some others I get the door sign frequently. I open the door and cant turn it on until the light goes on, which can take a minute to two. I have NEVER had problems with any microwave other than this one. I had a problem with the Whirlpool refrigerator too, which was fortunately still under warranty. I bought the fridge, oven and microwave as a deal. Trust me, there is no deal here. I will never buy this brand again. Lesson learned. Given other reviews, I might just buy another brand of microwave. Worth not having the hassle.

I did not purchase the washer (Cabrio Top Load Clothes Washer) but inherited it in a home sale. Never had a non agitator. I was excited for this new washer. After a week I knew why they left it! My clothes did not seem clean; stains were still on them, when I used the delicate cycle a pair of pants went in folded and came out folded!!! I also would have to redistribute the clothes every time I had a load that was larger than five pieces, because it would stop. I would actually have to take clothes out and spin what was remaining then put those in the dryer and put the other clothes back in and spin those again. I was told I needed to use OxiClean on top of my normal detergent in order to get my clothes clean. Never again will I purchase a Whirlpool. Just bought an LG; fingers crossed.

I contacted Whirlpool in regard to one of their water heaters we purchased from Lowes. It came with a 5-year warranty. At the end of 3 years, the lower element went out. Our plumber took the part back to Lowes, where he stated they normally just do a part replacement with them. On ours, he was told the owner would have to contact the manufacturer. I contacted them and supplied them with the plumbers bill and copies of the front and back of our canceled check, along with all my contact info. Their website states theyll get back with you within two days. I contacted them on March 13, 2013. Today is April 7, 2013 and they havent emailed, called or snail mailed me. After reading these consumer reports, the air has been let out of my balloon. No more Whirlpool products for me! Integrity in our country used to be extremely high. Today it is extremely low as demonstrated by the complaints on this website and now mine. Hey Whirlpool, you suck!

DO NOT buy Whirlpool branded electric ovens. Whirlpool put out an update and it fried the control board of our electric built in oven. They refuse to fix it. They have kept us on hold for two hours and then tell us there is nothing they can do to fix it. We had an extended warranty that just “disappeared from their system.” They told us someone would call back us but no one has. This was an update we were told we had to run in order to use the associated APP. Our oven is only 2-years old. We now will need to pay for the repair ourselves. DO NOT BUY.

The board manufacturer number W10312659 went out. They replaced the board. The oven was 6 months old, luckily was still under warranty. We didnt purchase a extended one because mostly it had a good name and brand. Well after a year and a half the board went out again. It gives error code H5P which there is no error H5P. So the boards out. It is very costly and thats with you doing your own service. Never will I buy another Whirlpool stove.

Ive had my Whirlpool Refrigerator for 2 years. Within that 2 year period, all 3 of the drawers within the refrigerator have broken and now there is a crack in the freezer on the bottom starting in the front and going straight back on the bottom to the back and up the back. After pleading my case for a new fridge to their Customer Satisfaction Department and everyones supervisor therein, theyve offered to pay for the epoxy repair. Im very dissatisfied with this! I dont think that a $1300 fridge should be held together by glue after only 2 years. Ive been waiting for one of the drawers to be replaced for over 2 months. They claim that the crisper pan is out-of-stock and they have no information if it is in production. Im to call back in 2 weeks to find out the status of that part. I would like to add that my husband and I work 6 days a week and our adult children are rarely here, so this refrigerator is very lightly used. We dont have a household of 6 or 7 people constantly home, opening the doors and sliding out the drawers. The fridge that I had previously was a GE and it lasted 30 years. I guess the next one will probably be a GE. I just wanted something different. Well I got it. Its something broken.

I have automatic Whirlpool washing machine since 3 1/2 years I am using. Now 2 times electronic board came problem so how many times can change like this? Why they are manufacturing if they cannot solve this problems? Should not sell in the market. This all not coming free and need to struggle. Whirlpool products all very bad appliances.

This Cabrio washing machine is really frustrating....... It goes off balance all the time. It does not matter if you have a full load or partial load, I know it has a tendency to go off balance, so I try to put the clothes in evenly. BUT it doesnt matter, it goes off balance. When the washer is downstairs, it gets to be a pain. The lid lock is a pain also. If you forget to put something in the machine, you hit pause button then you have to wait forever until it unlocks, and wait forever to unlock when it goes off balance. When it doesnt go off balance, it washes everything just fine. But if I knew what I know now about it, I would have never bought it....... I would recommend a different washer and check the reviews, which I didnt do. :(

I would say that the Whirlpool refrigerator is overall satisfactory and a good product. The size accommodates our refrigerator needs. Would recommend product to my friends and family.

Whirlpool Washing Machine WTW4800XQ4 - This is an expensive piece of garbage. My clothes come out with lint still on them. They do not smell clean and in fact, I wonder if they even are. My blankets come out heavy and soaking wet, so much so that I have to repeat a rinse and drain cycle before I can place into the dryer. The machine is always off balance and its so loud that my almost deaf grandmother who cant hear a thing wants to know what that noise is when shes halfway across the house each time Im doing laundry. Ive called Whirlpool and they have sent a tech out who insisted it was I who did not know how to load a washer and that was causing all of the problems. I found this interesting since I am 37 and never encountered difficulty with a washing machine before. Our visit concluded when he insisted it was user error and went on his way. The next day, the washer was not even cycling, and I phoned whirlpool back. This time, there was a computer problem and there was no arguing about it. The technician came back out reset the internal computer. The machine seemed to run more quietly for about a week, but went right back to its old loud self. The only improvement Ive noted since then is it does not move across the floor now while washing. I wish I never bought this thing and would certainly never recommend it.

I bought new and both have broken over and over. The oven takes forever to heat up. The fridges ice maker broke and then the defroster in the fridge side broke. Dont buy Whirlpool.

Six warranty visits and the fridge still doesnt work. Cools to around 44 degrees in the upper part and lower part barely freezes. We have gotten sick from food left in the fridge after two days from the grocery store. It is now approaching two months without the use of our new refrigerator. DO NOT buy a Whirlpool. Apparently there was a manufacturing defect. We are now learning that a $2,400 fridge doesnt seem to be able to be fixed by factory-trained specialists.

This washer started out to be good. Its only 5 yrs old. We began to smell an odor. Went to Lowes, spoke with someone in appliance dept. Purchased something for washer. DID NOT WORK. We have tried bleach everything. Our clothes smell. I have skin rashes and I think it is related to mold and mildew. Called the service center. They said could be a sock stuck around the tub area. They need to recall this washer. We spent a lot of money and it has ruined everything. Cannot get the odor out. We cannot afford another one. There is black mold around the rubber lining when you open up the door.

Weve owned a Whirlpool Gold Series Dishwasher for about seven years. There has not been a year that has passed that we have not had to place a service call with a local service provider. (Each service call costs $85.85.) The upper tray has come off the tracks more than 10 times. The drainage mechanism broke the first time we used the dishwasher. The fuse box (which is amazingly a self-contained, enclosed, black box) has blown twice, has to be completely replaced, and costs over $180. The second time it broke, I ordered, paid for, and had delivered the replacement part only to find out that the broken part suddenly started working again. (I guess Ill have the $180 part for the next time it breaks.) To suggest that this product is junk is an understatement. It will be replaced very shortly.

Whirlpool 70328 215 IMFRESH ROY 5S purchased on 14th Feb. 2016. It has stopped cooling on 11th April 2016. Complaint lodged on 12 April. No serviceman attended and not connecting toll-free number. Never, never go for a Whirlpool refrigerator.

First, I was put on hold by the first female for 44 minutes, and then a second woman finally answered, and said she didnt know why she would send me to her, because she was in the sales department, and she put me on hold for another 25 minutes. I finally had to go, because I had an appointment. When I got home, I called back, and got a man by the name of John, and at least he recommended he could schedule a repairman. The problem I told him is, the inside wall of my refrigerator has 2 cracks on the side, and a crack on the back wall. I dont want a repairman to come, just to tell me he cant put 2 new walls inside of my refrigerator. I could not find an email, so I could email Whirlpool about this problem, and definitely, they were of no help. I bought the refrigerator at Lowes late 2003. I have never, in my life, seen the inside walls of a fridge do this. I spent a lot of money for this, for it to crack on the inside walls. It does not seem like something is right with this.

I have not use wash machine for 46 years, however, since I the caregiver for my wife (with Parkinson), Im the user of our washing machine, High Efficiency Whirlpool for 8 months. It Is very easy to use including the dials. It is very efficient to use.

I have purchased a 3 door Refrigerator of Whirlpool on 27th October, 2014 from Sargam India Electronics Pvt Ltd. Now my refrigerator was not working properly. So we registered a complaint regarding same. On 3rd July your one executive came and he asked that its compressor is not working and we have to refill gas also and charges will be 2000 rupees for Gas and compressor is under warranty. Then on 4th July your another executive came with compressor and he worked for 1 hr on fridge then he asked, Compressor is not taking load. My senior will come tomorrow, mujh se nahi ho raha. On 5th July morning we got a call and he asked that he will come till evening. Now we got a call. They are asking that its not under warranty. Hum log paso mai dhik kar sakte hai. When purchased in 2014 last ist thing its under warranty only they have told us for 10 yrs. And we have purchased 4 yrs + back not 5 yrs completed. Apart from your customer service guys we never shown this to any one else as its under warranty, I am clearing this thing on prior notice. Senior are not taking action. They are asking we can do it in money. They are asking, If you want to go consumer court you can go.

This is a comment for the person with the ice maker problem. I have a side-by-side, in-door ice dispenser that clogs up. First sign of problem is either the ice wont come out or it comes out crushed. What happens is frost builds up in the path the ice takes at a couple of different points. The only solution I have found is as soon as the problem starts I turn off the ice maker using the switch on the inside of the freezer. Then let it empty with normal use (if you wait too long youve increased your problems). The release button for the ice bin has frozen by now so you cant just lift it out. The bin needs to be empty. When it is empty, work the bin loose and take it out. Youll find that frost and maybe cubes have collected, frozen and blocked the passage. Be sure to turn the ice bin on its side and spray water into the undercarriage to melt and remove all the ice build up there. I use a hot sponge to melt the frost in the ice tube and then dry everything. This gets messy so be prepared to have water on the floor. Dry the ice bin and reinstall it. Ice cubes will be ready to drop from the ice maker so it wont be long until you have plenty. I live in Florida with high humidity so need to go through this process about once a month. Its a pain, but now it is just part of owning this unit. Good luck and hope this helps.

I love the large capacity of the washer. But something is turning my whites YELLOW! I have never had this problem in 40 years of washing clothes. All of my whites come out yellowish and I am getting what could be rust stains on heavier cloth (white denim). Also, I regularly used the soak setting on my old Whirlpool. That setting is not available in the Cabrio. I have tried catching between cycles and the drum is constantly emptied. I wish Id read these reviews before I bought.

I was very excited when Melanie from Whirlpool customer service called me back about my complaint. WHAT A JOKE! I thought she was going to offer at least a repair considering by her own admission this same problem with my control panel of my double oven happened just last May (dead for the third time). Instead she offered me 15 to 30% off a new product if I bought it in the next 30 days! ARE YOU KIDDING ME?The first time the control panel died was when I used the self-cleaning feature. The oven never turned on again. Cost me hundreds. I have been afraid to use the self-clean feature ever since. The second time was in May and is no longer under warranty? Again it cost me hundreds!! Now I am supposed to be happy with 15% off another one of your products? Why would I have any faith in any of your products? I have since found out that Whirlpool has had so many problems with this model - they have quit making it. The repair man says Whirlpool cant make the control panels fast enough to keep up with all the repairs but this is still not under warranty - how about a recall? Do you guys stand by your products at all?

Not working at all and only 3 years old. Completely non-functional. No fridge or freezer. Lost all my food. Garbage. DO NOT BUY.

My Whirlpool Gold, French door refrigerator is 3 years old and just died. The most frustrating part was trying first to go through Whirlpool.com to have them schedule a repair service call. It seems that when I added my zip code and address, their program automatically changed the zip code. So an appointment was scheduled for a repair company that is 4 hours away from me. In calling Whirlpool back (another 30 minutes on hold), they again attempted to insert my address and zip code only to find the program changed it again. I got NO assistance. I finally did find someone (through Thumbtack.com) who found that one of the 3 circuit boards that tell the compressor to cool, was bad. Its going to be 10 days before I will have a refrigerator again and after spending 2K on it, makes me angry. I will never buy Whirlpool again.

Oven was just about 3 years old when the oven bake feature failed the first of many times! Display says fault detected. Was able to get oven cleaning done and then it worked again but eventually has failed repeatedly since. Further reading and support from technicians has revealed its an oven control issue and replacement part is same cost as new oven! Apparently the oven control Whirlpool designed and installed cant handle heat!?? Very unreliable and would never buy their appliances again!

I had sold appliance for ten years. I purchase a Whirlpool Cabrio 2010. After two years started rusting. It is rusting on the outside and now on the inside, that I cannot wash delicates or whites. I so disappointed. I had lots of confidence in Whirlpool. The model is wtw7300xwo... I call talk to whirlpool but got no help. Now I going to need to purchase a new washer. It will not be a Whirlpool.

Do not buy whirlpool water heater!!! It will only last 3 years.

The washer itself doesnt get the clothes clean. The clothes on top never get clean, they smell. It doesnt spin out the clothes evenly even though I put them in evenly. There is oil on my floor under the washer and Rent-A-Center doesnt care and its under their Benefits plus program. They were to send off both washer and dryer last time and had no paperwork where washer was sent off at all. It has ruined a lot of my clothes with spots and I used the Tide pods. Stopped using them cause they were not working. I will never buy another Whirlpool product or appliance. Water pump went out in one year... Why would you not care about your customers... I got this set in 2013 and its the Platinum line triple top loader. You lucky to do one load at a time, a single load that is...

What a disaster! Within one year we had to repair the stove twice, the dishwasher and the fridge! Almost three years later, we are experiencing problems with two burners and with the fridge! The company does not stand behind its products. Avoid them.

I purchased a home that came with Whirlpool appliances. I begged the company for GE or Maytag. Of course they went with the cheapest they could find. I must admit the microwave gets very hot but the dishwasher is a piece of crap! The water doesnt get hot and the dryer doesnt work. They tried to tell me it NEEDED Jet-Dry. I own 4 homes and have lived in all of them. Ive NEVER used Jet-Dry and all the others work perfectly. Run as far as you can from Whirlpool!

Bought top of the line KitchenAid refrigerator $4500... Completely stopped working in 3 months. Cannot get ahold of anyone at Whirlpool & their phone system is ineffective. Appliance technician came out, cannot get the parts he needs from Whirlpool!?! He said that if he cant get parts in 21 business days then Whirlpool may consider replacing the fridge. Is this a joke?!!! I have a 1970s Frigidaire still working!

Aqualift cleaning does not work. I am old with bad knees and do not need an oven that has to be cleaned manually. This technology is a joke and everyone who bought one should be reimbursed. One reviewer indicated that there should be a class action lawsuit for this situation. I agree!

My Whirlpool is almost 20 yrs now and we thought we were going to have to get a new one! New ones aren’t equipped with what mine has so after much investigating we decided to try a water inlet part for $35 delivered and oh to our surprise it is still performing like new. We bought the top of the line and it still is! Thank you Whirlpool. You are what you say you are. Arlene **.

Whirlpool gold series wrf990slam02, just 2 years old bought from Lowes, and repairman just told me that it has a Freon leak which apparently happens often. Will have to replace some items that might fix it but he did not sound reassuring. RUN dont walk away from this brand. I looked up these refrigerators after this all started and they have a 1 star rating. I should have done my homework on this.

Bought Cabrio 3 years ago, started getting ul code and f1 code. We leveled machine, but cycle kept getting stuck mid-cycle. Called repair guy, they say it is going to cost between 6 to 800.00 to fix???? Really. Its three bloody years old. Very disappointed. Do I now get it fixed or break down and buy another washer. I would not buy Whirlpool again. Very pissed.UPDATED ON 02/05/2015: We called an appliance repair company and initially paid $440.00. After installing a motherboard computer system, it still did not work. We were then told that the other part would be another $120.00. We were already soaked for $440.00 so we decided to pay. After that was repaired the washing machine was still stalling mid cycle. We were then told that it has something to do with the wiring and it would cost another $120.00-$140.00. Needless to say, we declined. Complained to whirlpool that machine was three years old. We are pissed and $570.00 out of pocket. Just bought a lg front loader and paid for a 5 year warranty!!

I have a Whirlpool Cabrio washer. It was great for almost year. After that it has been nothing but trouble. The body of the washer has rust coming through the paint and large areas that is so rusted that the paint has chipped off completely. A washer is expected to deal with water and not rust through the body. I have a 10-year old Ford truck without a speck of rust. Dont they undercoat? The circuit board has had to be replaced because of rust. I have to take several Q-tips and go under the cover to remove all the rust if I dont it gets rust stains on my clothes, which is impossible to remove. The customer service is non existent. They have left me on the line for over 40 minutes. I hang on only because it would be another hour or so of my time to get someone to answer. I was without a washer for a month while waiting for parts. Why dont they have parts for their products? I had to slop my way too dirty laundry mats 3 times a week as I do 2 to 3 loads a day.My washer is downstairs and stops and gives me the unbalanced message even when its not, running up and down the stairs several times to complete one load. I also get the F51 message for no perceivable reason. The extra rinse button only works 1/2 the time. This was an expensive washer ($1,000.00) and I feel that I deserve my money back. They are knowingly making an inferior product.

Piece of crap! Approximately 18 months of aggravation. Clothes don’t come clean, leaves residue on them. Just absolutely the worst experience I have had in six plus decades of doing laundry. When next I get a washer...it won’t be a Whirlpool or anything made by the company. There should be recalls on these washers.

This refrigerator (Model #wrf560seymoo, Serial # VS31343718) was new in April 2013. In the last 3 years it has required 3 service repairs. Two under the extended warranty, one recent one 3 months out of warranty. All repairs came up in the last 3 years. The first repair addressed frost build up in the freezer. The second required replacement of the water filter compartment and the third will be addressing water dripping from the freezer door when I open it. Even after turning off the ice maker and removing the frozen puddle from the bottom of the freezer, it still drips water when I open the door. I have a call into service on this right now. I would like the company to fix the current issue even though it is outside of warranty. This product is too new to have so many problems and be just over 5 years old.

Cabrio is our washer and dryer. Dryer had no issues in the last 7 years. Washer constantly throw UL or unbalanced error and stops. Rearranging clothes only works for another few minutes. First time under warranty, tech came and fixed it. Second time without warranty, I cleared some loose socks between the tub. Third time same problem. YouTube suggested to change the springs on four corners that hold the tub. $25 and problem fixed. Basically, if you are not an informed consumer you are screwed for $$ silly stuff.

Whirlpool 5.3 Cabrio. This was the worst experience ever with a washing machine. My first cabrio did not work at all. My second one gave out after 2 weeks. It would not spin. I got my money back and would not recommend this washer.

I purchased this machine in April and already, the right leg is rusted and the under seam of machine is rusted. I have throw rug under it and where the leg is, there is rust on the rug. I called service from Whirlpool and 2 servicemen came out. The first one told me I was loading it wrong and the water was splashing over the inside tub to rust the leg and I asked, So why is the seam under the machine rusted? No answer. The second one came out and told me he could not find anything wrong with the machine and doesnt know why it is rusting, but he never gave me a paper to sign off on. He also said that maybe it was rusted when it was delivered. Not!!! Then I call P.C. Richard in Watchung, NJ where I bought the machine at and told them about the problem. They sent a serviceman out and he said that the bleach condensation is causing the rust, its known fact that this machine has this problem. He said that the water does not run through the dispenser but there is a model that does. I want a credit on this machine and get the upgraded one. It states on the machine that I can use bleach but it doesnt say it will cause rusting. I want you to tell me how a 9-month-old machine is rusted on one leg and the seam underneath is also rusted!!!! I had a machine for 10 years and it wasnt rusted. I am very unhappy with this product and with the customer service of Whirlpool. This is my first Whirlpool washer and I would not recommend this washer to anyone. I paid $600.00 for this washer and it should not be rusting.

Disappointed with Whirlpool Gold bottom freezer GX2SHBXVY05. We purchase this refrigerator in December 2010 thinking we were buying a good quality french door fridge. It didnt take long before problems started with the freezer over freezing and the fridge not cooling. We also had a problem with water pooling on the bottom of the freezer then freezing into a solid piece of ice. Water eventually started pooling on the kitchen floor and living room carpet. We did not purchase the extended warranty believing we shouldnt have had to as we were believing a good name brand. After having a repair person in twice we were told we needed a new computer board and switch. Total cost for repair $350.00 plus previous charges, so far adding up to over $450.00. We called Whirlpool customer service, was a waste of time as they simply told me they could send out their own repair person to obtain the same diagnosis I already had. They told me I should have purchased the warranty. I told them I shouldnt have needed to. Whirlpool customer service refused to do anything for me as it was too long past the 1 year limited warranty. Doing my own research I found this to be a problem with a great many Whirlpool fridge owners and I mentioned this to their customer service and mentioned there should be a recall. I will no longer purchased another Whirlpool product as the company does not stand behind their product.

My brother bought my 80-year-old mom this range so that she could bake all her delicious desserts with ease in a new beautiful oven. I was at her house visiting and saw that she was down on her hands and knees cleaning her SELF-CLEANING OVEN. She tried several times using the useless AQUALIFT FEATURE but to no avail. In this day and age with self-cleaning technology, WHY would Whirlpool install this unbelievable bad AQUALIFT cleaning feature? To see my poor mother scrubbing the inside of the oven like she did back in the 50s & 60s just completely appalling!! PLUS the top surface enamel is bubbling up with rust and the oven is only 2-3 years old. So we are trying to contact Best Buy to see if we can get a refund on this HORRIBLE appliance.