We have a 2 1/2 yr. old Whirlpool gas stove. We have had the mechanic here several times as it would not ignite. We also have had the control panel repaired twice as it melted. It is melted again but they will do nothing. I tried to clean the oven with their AquaLift technology and had to re-do it four times and still have residue which appears to be permanent. We are very frustrated with it. We have used Whirlpool appliances for over 40 yrs. but will not buy another. Model#WFG710HOASO, Serial#R21712236.

The AquaLift self clean is a joke! Doesnt clean at all! Has to be consumer fraud, calling it a self clean. Ive owned electric self clean ranges for 40 years, that did great jobs. This does zip for cleaning! Unbelievable! Should be a rating below 1 star!

I bought a new Whirlpool electric range in the spring of 2008 and purchased the extended warranty from Leons. The oven worked fine for the first three & 1/2 years, but then the bottom element in the oven seemed to have stopped working. The top element would still come on, in an effort to keep the oven at temperature, but was not effective.I called in a repair. The technician showed up, turned the oven on, noted that the bottom element did not come on properly & replaced the motherboard in the control panel with no further diagnosis. The oven worked for approximately 9 months and then the problem recurred. I called in another warranty repair. This time when the technician showed up, he turned the oven on & told me he was going to order a new bottom element, which he installed about a week later, again, with no further diagnosis.Now, here we are again, one month off warranty and 6 mos since the last repair, and again, the bottom element in the oven is not working correctly. I reported the issue & my dissatisfaction to Whirlpool and was basically told, How sad, too bad - hardware components fail and theres nothing we are going to do about it. Seriously? This range is just barely 5 years old and has a history of repeated problems with the bake function - obviously, something is defective in this product.I can see it, if I had not had any problems until this point, but when the same issue keeps coming up & obviously has not been correctly diagnosed and repaired, I would think they would have enough integrity to offer some kind of help or solution. Given the history here, its highly unlikely that Im going to be willing to spend big bucks on another attempted repair that, in all likelihood, will be merely a short term band-aid, so Ill probably have to buy another new range - which I cant really afford right now. Trust me, it will not be a Whirlpool & it will not be from Leons.

The double oven is the best! Doesn’t heat up the house like the older stoves! Very easy to clean. The range is all one level, so it is at easy to set your pit anywhere. Also the middle burner is amazing for a griddle!!

We bought this product and had only had it for a couple of weeks when I spilled soup on the open microwave door. My mistake, but I would think that might happen to other people once in a while. The soup leaked around the window gasket of the microwave and streaked the interior of the door. It also ran down into the door of the oven and streaked the interior of that door. No way to clean this up that I know of without taking the door apart. I think these gaskets should not allow liquid they leak into the inside of these doors. Whirlpool says its my problem. They call it a use and care issue. I think its a design issue.

I would not give this any stars! I purchased a Whirlpool gas range (model #WFG371LVB1) just 2 years ago at Lowe’s. The oven heats up to 475 no matter what temperature it is set at. The Whirlpool authorized service agent said it needed a control board which would cost $650 to install. The repair company found one for less--only $300. After reading all of the other complaints about these ranges, weve decided not to repair it and will probably have to replace it soon. We have been Whirlpool customers for years and will not purchase another Whirlpool product. There should be a recall on any of their products that have these continual problems. The oven cannot be safely used for normal baking.

I love my new stove!! It cleans so much easier than my old one. Would recommend whirlpool to everyone. You cant beat the price for a Whirlpool because it will last way over a decade. My mom has one too and she said, Get a Whirlpool Lyn because they last so long and she said after 10 years hers still looks new!

To be fair to Whirlpool, I have contacted them but have not given them time to respond. I feel so strongly about this issue that I want to get the message about this company product out. About 2 years ago, we purchased a Whirlpool fridge, stove, and dishwasher. I have had so many problems with the stove (WFG540H0AS0) that it has pissed me off, actually. First, the knobs that control the stove top melted. MELTED! We had to replace them to the tune of $30.00 each and there are 5. Why would anyone use knobs that cannot withstand heat on a stove?! News flash, I cook on my stove. Therefore, there will be heat used. Second, the oven keeps shutting off in the middle of cooking my holiday meal. Of course, this made my turkey take much longer than usual. Today, it shut off in the middle of cupcakes. Third, the oven does ignite without turning it on and off multiple times. So we called the repair person who told us to replace the ignition switch for it. This helped for about one month. Then the problem started again. I just emailed Whirlpool and I will call them next business day. I am so disappointed with Whirlpool. I thought they had a good reputation for quality products.

I bought my glass top stainless electric Whirlpool range in April of 2019. It worked great until December 2019. Four days before Christmas my daughter was home alone and using the oven to heat up dinner. She smelled a terrible smell and there was a ton of electrical blue smoke. She called me at work and I told her to turn it off. My husband came home as I was talking to her and pulled out the stove. The place where the stove meets to cord had burst into flames. The wires in the cord were so badly damaged they were all exposed and singed. Our house could have caught fire! The whirlpool company will not stand by their product. They blamed it on the team at Lowe’s who installed the range...Lowe’s has been nothing but confusing and frustrating to deal with! I can’t believe how we’ve been treated. Do not buy whirlpool! These stoves are dangerous!

Bought on 9/11/2014 and installed by Lowes installers on the 15th. It quit heating two days later. Called Lowes and they said I would have to call Whirlpool. I did. WP had me metering with a multi-meter until found OTC button was tripped. Then they suggested I troubleshoot the elements and sent me a video. I called Lowes and they said they would replace. Later they called back and said WP would not give them a RA number and for me to call them. I did and the rep after much arguing directed me to call their factory authorized service, A & E. I did and they said it would be 33 days before they could come out. I hung up and called Lowes who called back later and wanted me to call WP again. This time they said they did not have a repair service close enough to come, but I could try buying the lower heating element and replacing it to see if that worked. I said no, the heater was brand new and they needed to fix it. Their next solution was have me contact a local plumber and arrange to troubleshoot, me pay the plumber and then send them the bill. They would reimburse me up to $100.00. Not acceptable and now the button has to be reset every few hours and the water gets scalding hot while it is heating. I called Lowes and they said they would get back to me, but I have little hope of a resolution. Product number is ** SN is ** Model is E2F50HD045V. Bought at Lowes, Lindale, TX.

Five years ago, I decided to splurge on a really nice (expensive) over-the-range microwave during a complete kitchen remodel and had the Whirlpool Gold Velos Microwave GH7208XRS installed, thinking Whirlpool would be a reliable brand to replace our 18+ year-old (still working) Kenmore countertop model that we had used previously. About 4 months ago, after a couple of mysterious cases of the control panel going haywire (turning on by itself in a different modes), it started pouring smoke out the top and service was called and the magnetron and inverter were replaced to the tune of $482.Fine, things happen. Yesterday, while opening the door, the handle snapped off and (upon closer inspection) I noticed cracks around all sides of the door frame - see photos. After reading about similar complaints about Whirlpool microwaves on this forum, I really feel that this is a defect in materials and should be recalled or at least addressed by the company if they want to maintain their reputation. Right now, I am waiting on their authorized repair service to see what my recourse will be.

I am not pleased with my self-cleaning oven. I dont even use my oven that often and I cannot get off even the simplest of stains on the sides, top, and bottom. I have tried to clean the oven three times and the stains from pie drippings are still not coming clean. It should not be this hard to clean an oven because my last oven was so much better and it was not Aqualift. The top of the oven is also very hard to keep the burners clean and looking like new. I am very disappointed in this oven and believe that this is false advertisement to the consumers. I pride myself in keeping my kitchen looking clean but this just is not working for me!

My brand new oven kept turning off automatically. When reported, they kept sending a technician who kept lying to both parties regarding what the issue was. Whirlpool customer service people have been extremely rude and declined to fix the issue although my oven was under warranty without giving me proper reasoning for their actions. I am truly dumbfounded with this experience!

The first day I set foot in IKEA changed my life, innovative and sensible and affordable. Some years later I had the opportunity to remodel a kitchen and I immediately thought of IKEA. I used their online planner, researched the appliances and knew that they were made by Whirlpool and that they offered a kitchen package discount if I bought 3 or more appliances with all the cabinetry. So I hurriedly designed the entire kitchen from top to bottom with IKEA.Included in the design was my center piece, my 5 burner Praktfull Pro Gas/Convection oven range with stainless steel backsplash and top of the line hood fan, basically a thing of beauty! I loved it and I visited the store several times to look at it. I finally bought everything, and installed it. Absolutely the most beautiful kitchen in the world.We have a historic building and were on several historic tours, interviewed for the newspaper, our kitchen was the highlight of the tour. My gas range drew oooos and awwws. The range is an exceptional appliance, beautiful and amazingly efficient, easy to clean…I was in love. Then one day it happened, the love affair was quickly over, devastatingly over. The door fell off the oven and the hinge broke! Yes you heard me right, it fell off, but that is not the worst part. It appears that not only are there no parts to fix it… there IS no fix for it, period. The door fell off because it had been glued on!!! Yes glued on. Whirlpool and IKEA had actually manufactured an appliance that failed in less than 4 years of use and no apparent intention to ever provide service or parts for it. This is criminal and they should be fined for their neglect of the customer, their calculated malfeasance and fraud to the customer.So my beautiful kitchen has a big black angry cavity in it and now I must try to find a new range that will fit in the opening left by this piece of junk and also pay probably over $2,000 to $4,000 for it. Most of all I am heart broken, mad and distrustful of anything IKEA in the future. Oh and by the way, my entire house is IKEA, my living room, my patio, my bedroom (s), my library, my office! Ive spent thousands and thousands of dollars at IKEA. No more! THE FINAL INSULT: Ironically…. my kitchen was featured on the IKEA website!!!

The stove started having problems about 5 months after I bought it new, it had a 1 year warranty on it so the first repair was covered but it begun to have the same problem a few months after the repair. By the time I contacted the company they told me the warranty was expired and ask if I wanted to buy another year of coverage for $300, of course I said no. I repaired it myself and once again it worked for a few months and now the problem came back. Will not heat up so dont waste your money.

My double oven is only 6 years old - it stopped working on xmas day, had a repair man look at it. He has phoned Whirlpool and has not had his calls returned to buy the part needed. Why is this. I need my oven, why is Whirlpool making it so hard for me to have it repaired.

Purchased a gas stove June 10th, three days later smelled gas. Called the store where I purchased item, they gave Whirlpool 800#. They set an appointment 2 weeks out. Got part then burners only clicked. They ordered more parts. Now top range works. Started to use oven and got extremely hot. Called store. They referred back to Whirlpool. After hour and half they scheduled appointment. First appointment he didnt have tools to check temperature. Rescheduled for following week. He said oven was off 30 degrees. I then went to store to ask to return item. They said up to Whirlpool. On phone with Whirlpool over two hours, them switching from one department to another. No help. They insist on fixing again tearing up unit in my new wood floors. Dont buy anything from them.

I purchased a whirlpool under counter oven - my main reason for not buying something cheap was the safety of my family - I chose the AKZM656 eye level oven. The stove is about two years old, but we do not use it that much. Two days ago my wife set the timer and placed a dish in for cooking; she then went outside to water the garden. About twenty minutes later she returned as something was burning- the oven reached a temperature of 350 degrees and would have burnt the whole kitchen down if she did not spot it. Now surely the oven should be designed to switch off if sensors fail? I reported this to Hirsch (Ballito) but they say they have no one servicing the Richards Bay area. I am not sure if this stove should be fixed as it is obviously not safe and makes me wonder how Whirlpool get safety standards passed on these items. Surely you expect better when buying a well-known whirlpool brand?

I have a gas range Model WFG540HOESO Airlift self clean. When anyone reaches across or leans against the range, ever so slightly, the knobs turn and gas is released. It is EXTREMELY dangerous. The Airlift self clean has never worked. When the repairman contacted the technicians at Whirlpool, they told him that there was nothing they could do. In other words, I am stuck with an oven that will not self clean. The water in the bottom does not even come to a boil.

Whirlpool built in Electric oven Self Cleaning Model # GBS307. Dont Clean your oven! Everytime you clean the oven, the thermal fuse switch will burn up on you and will cost approximately $150.00 to fix. Dont use the self cleaning on this oven!

I recently had the bake sensor go bad on my Control Panel of our Whirlpool Gold AccuBake Oven with microwave. Not a problem correct? WRONG! While the Whirlpool people were very professional in helping me (a shout out to them), the part I received was the wrong color. It was white; they called it a biscuit color. My oven is black. I have no idea what Whirlpool actually calls that color. Anyway, in my visit with them, I was informed the black control panel has been discontinued. Am I the only person that has a black control panel? This $280.00 part is now going to cost approximately $3,000.00 to replace the entire unit. Is there anyone that can direct me to where I can find a black replacement control panel? Way to take care of your customers Whirlpool. Solve this and I will give you a great shout out.

My stove has met all my baking and cooking needs. Love the self cleaning oven and I mean it does clean every bit. Always bakes at right temperature. I love it. All my pies and cakes come out perfect and the look of it is just pretty and matches my kitchen.

I used their website to schedule an appointment for an estimate for a repair on my oven. I was never told they were sending an independent contractor to do the repair nor that there would be a charge for the estimate. I contacted Whirlpool and was told there is nothing on their website and I should have asked the service technician before he was at my door if there would be a charge. Therefore, it was my fault and I indeed had to pay the charge when I declined to have my oven repaired. I paid an independent contractor hired by Whirlpool for $129 to give me an estimate on the repair to my oven despite never being told of such a charge prior to the appointment.

When I grew up, my mom and dad had a Whirlpool dishwasher and it was the ONLY dishwasher we EVER had. The SAME one, for over 20 years! So, with confidence, I purchased a mid-range unit. (over $600 2015). By 2016, ONE year later, I was already buying replacement parts because the top rack was falling apart and the bottom spinner broke as well. The parts were extremely expensive and hard to find. Now, a mere 4 years later, you cannot find ANY parts for this machine and there are so many issues with the unit. It is no longer functioning. When it did work it ran for 4 HOURS!! Even then, the dishes are filthy. I am so upset by whirlpool. I want a full refund from the company for treating their loyal customer so badly.

Help? WP Gold double convection wall ovens WOD93EC0AS rated very high by Consumer Reports installed end of February. Monday April 6, fan in top convection oven came on suddenly while oven not on. When I tried setting a baking temperature in top oven to see what was going on, message read This function is not available. After about 15 minutes the fan went off, and I could use the oven. Worked well Tuesday and Wednesday. Oven not used again this week, but this evening, Friday, same thing happened again. Process has been repeated several times with fewer times between fan turn on. Have turned off power to ovens until I can get a repairman. Has anyone else had this experience or know what the problem is. Have been reading about the problems with WP ovens. Wondering if I need in addition to Home Depot Warranty the one from Whirlpool as well. Had Bosch convection ovens for 12 years then self-cleaned and thermostats went out and cannot be replaced because parts no longer made or available through any supplier. Said I would not buy Bosch ovens again because the parts became unavailable even sooner. What a mistake. Apparently self-cleaning element blows a lot of ovens thermostats and/or circuit boards. Loved the ovens and had only one repair after the ovens were one or two years old. The Bosch dishwasher is same age and still working great and usually cant even tell it is on.

I will keep this brief because many of our issues on our 18-month-old washer are in other reviews. The anger I feel towards Whirlpool Customer Service and the logic they use in providing repairs on a “goodwill” basis are unbelievable. After a Whirlpool certified appliance repair person diagnosed our fairly new washer as requiring the entire guts to be replaced... transmission, bucket, etc., we were told the repair bill would be over $1,300! Are you kidding me... the washer only cost in the mid $500 range, and now Whirlpool is going to do us a big favor and cover that outrageous bill! I told the customer service supervisor to please give us a new washer and take away our broken washer and use it for parts (if there any good parts left in this miserable machine). His reply “thats not going to happen”. He used this phrase to us at least 20 times during our service call until I finally told him I thought his attitude was aggressive and demeaning. I refuse to be bullied by a major manufacturer for a substandard product.I can only warn you when considering Whirlpool (and every major appliance in our two homes are Whirlpool) that you should use due diligence in your selection. We paid extra to upgrade all our Whirlpool appliances in our homes and I will never make that mistake again. And don’t get me started on the white film that covers my dark clothes. They say I use too much detergent... not true. I am not stupid and understand the HE requirement to cut way back on soap.

I have owned an Accubake gas range since April 2012. The range is 3 months out of warranty, and the oven will not light... just a clicking sound and gas pouring into the oven. I have also had problems with the burners being turned on by brushing against against the knobs. I have a note by the stove to remind myself to check that the knobs are in the OFF position. My 1 year old grandson turned the burner on just by touching the knob... NO SAFETY FEATURES!!! I havent checked to see what a repair is going to cost me, but if it is several hundred dollars, I will just replace this piece of junk. It is very sad that a costly brand new appliance only comes with a one year warranty. I will never ever buy another Whirlpool appliance!!

We purchased a Whirlpool Range from Brands Mart USA and did not try to use it for quite some time because our house was not ready to move in. When we tried to turn on the oven it would not come on. We called a repair service and was told the Motherboard was not working. We realize the warranty was out on the stove but it never worked and the stove is Brand New. We called Whirlpool and they was going to repair and changed their mind on December 18, 2014 at 8:54 am. Before that call we had spent quite a lot of hours on the phone with Whirlpool and Brands Mart USA.. We purchased three appliances from Brands Mart USA Range, Dishwasher and Microwave at the same time they were all Whirlpool products. What happened to Good Customer Service and Return Customers for Job Security? Well neither Company care for their customers. We did not break a motherboard for a stove oven because the range was never turned on because it was broken when purchased.. We are unable to get any help from either company. I talked today to ** & Supervisor ** from-Whirlpool and ** - Brands Mart USA, again no help. Why transfer you from one company to another for 1 hour and 45 minutes? WISH I COULD GET SOME HELP. And we wonder why companies go out of business - word of mouth complaints and especially with Senior Citizens like us.

So disappointed with my Whirlpool purchase. I will never purchase another Whirlpool product in my life. This is my second whirlpool oven to die in a short period of time. My most recent oven only made it two years. For there to be an internal wiring issue that is now costing me $500 to repair on top of waiting 30 days for them to be able to fix the oven. This is a terrible product. Unfortunately, I didnt realize the poor quality and poor reviews prior to purchasing from this company. PLEASE be advised.

We got a deal on our stove/dishwasher combination, establishing a payment plan upon purchase. And as a bonus, when you have a brand name appliance like Whirlpool, that made us more secure with the purchase.

My Whirlpool oven (Model WFG505M0BS0) stopped working - the bottom oven part (the top burners were OK), the display on top functioned normally, but no fire came on. I called Whirlpool, and then I accessed Whirlpool online and scheduled service with their official service representative - Flamingo Appliance Service ** for September 9, 2020. When the repairman arrived on 09-09-2020, he opened up the stove and checked it, and he told me that a computer part needs to be replaced, as well as the igniter, and the cost would be between $400.00 and $600.00 (I dont remember the exact amount), I told SEVERAL times, maybe its just the igniter (for which the cost would less than $100.00 AND already included in the $134.95), but he insisted that the computer needed to be replaced, I did not like the way he explained it to me, it did not make sense.After that I was planning to buy a new stove, as the repair was too high. But, I decided to try to change the igniter myself before getting rid of the stove (the igniter cost was $21.00). I just got the igniter recently, and installed it, with help from YouTube, and what do you? THE STOVE IS WORKING!!! This is fraud!!! FLAMINGO APPLIANCE SERVICE ARE THIEVES, AND BY ASSOCIATION, WHIRLPOOL, WHOM THEY REPRESENT ARE THIEVES ALSO. I shall publicize to the best of my abilities: NOT TO BUY WHIRLPOOL PRODUCTS!!! This was not a mistake!!! This is the way they rip people off!! Either by paying exorbitant amounts for unnecessary repairs, or by buying new appliances when the old ones are still good. Dont buy Whirlpool!!! Dont use Flamingo Appliance Service. Theyre both fraudsters.

First, let me say we are so lucky and blessed to get home in time to prevent my home from burning. My Whirlpool range, model 4rf364pxk0, apparently decided to turn itself on (no one home) and grew hotter and hotter. It obviously burned out the thermostat because it was way hotter than cleaning mode. The key pad was melted and sagging inward the control panel warped, heat pouring from it. The racks and interior were glowing orange! My back splash tile blackened and cracked! The oven door locked! Oven hood ruined although it probably saved my cabinets! We hit the breaker! There was so much heat you could feel it on the outside of the exterior wall of the house 30 minutes later! The clean up to my kitchen has been horrible. Black soot and strange greasy film on everything and the stench has been toxic enough to give my husband a raw throat and myself a migraine! Oh and here is the ironic part - my husband was bringing me home from a hospital stay from high blood pressure! It would be almost comic if it wasnt so darn scary! Please, please address this issue before a more tragic story is posted! From looking at this site, it is obvious that there have been other incidence of your stoves turning themselves on and uncontrolled heat. I firmly believe another few minutes and our home would have been engulfed in flames. Now I will spend my weekend shopping for a new ceramic range, hood and tile!

I purchased a new Whirlpool stainless steel smooth top range model #WEE745H0FS and it was installed the day before Thanksgiving, 11/22/17. The oven door handle was broken on inside by installers. I called Whirlpool warranty on 11/24/17 and requested a repair. A repairman came the following week two days late. He said he needed to order a part. After calling the “Whirlpool approved” repair shop multiple times over the next two weeks, I was told the part was backordered. Finally, yesterday, 12/13/17 the repairman showed up an hour later than appt. time. He took the oven door apart again and the new part didn’t fit my oven door. He had carelessly ordered the wrong part. I was told he’d put a rush on the correct part and that it would be here 12/18/17. I will never buy another appliance from Kelley Appliance in Augusta GA nor another Whirlpool product. I have had to use duct tape on my brand NEW oven just to use the oven so it doesn’t fall apart when opening.

We purchased 3 Whirlpool Gold appliances, fridge, range and over-the-range microwave in 4/2011. Since that time, the fridge needed repair, the microwave door had to be replaced and the range had to be repaired. Now the heating element on the microwave went and Whirlpool will not fix the problem. We purchased the extended warranty through Whirlpool and they are saying it is not worth fixing. We paid $470.00 plus tax and install and now all they are giving us is $348.00. Since we have had repeated problems with these appliances, why not just fix the problem or replace the microwave??? What Whirlpool customer service told me was that would be options for us if we did not purchase their extended warranty. Tell me, is that fair? The cost to repair the microwave was $388.00 and they are giving us $348.00 - do you not think for the $40.00 difference, it would be worth to spend it to keep us happy. We will never purchase another Whirlpool product again and will tell everyone we know not to buy their products.

I count myself as lucky... my Whirlpool 465 Accubake Ceramic Cooktop stove was given to me. I have used it for 3 years. One day, out of the blue, the oven, which was in use, started clanging loud and jumping up and down. I started screaming & tried to cut it off & it would not go off. I ran to the panel box & threw the breaker. It also burned my food that was cooking. It did it several times. Then I decided to not cut the light on or touch the button to raise the temp. It has not done it since. I bake everything on 350 degrees and immediately throw the breaker. I am scared of this stove and plan to replace it. I will NOT buy a Whirlpool, anything. (washer/dryer/fridge/aircon)....once bitten...

I have a lower end 4 burner model but I love it. Both power burns are in the front (I would change that) and electronic ignition. The oven temp is true and heats up quickly, I bake upwards of 700 cookies at Christmas time. Even being a lower end model it works great and I use it everyday. I think it is more energy efficient than the model that I replaced, which I replaced in order to have the electronic ignition. I would recommend this Whirlpool Range!

Whirlpool Gas Range Model WFG524LAB0 - Purchased on 09/2013. Product works well but noticed back in July 2014 that cook top was not cleaning well. Did not mind it that much thinking it was just baked on grease and would just do a general cleaning when I get to it. After the holidays and now getting around to clean the range top, I discovered the cause of range top not cleaning well. The porcelain was chipping away.Today I called Whirlpool customer to complain and see what they do. They replied that it was just a cosmetic blemish and that was not covered under warranty. I told them that that cosmetic blemish lead to rusting and eventually result to failure of the product. They also said it was out of warranty but was eager to have a tech come over to check the problem out for additional fee.

We have a Whirlpool double oven that is about 3 years old. Today we used the oven for lunch and about 2 hours later we heard a loud sound from the kitchen. When I went to see what had happened I found glass shards all over the kitchen, some as far as 10-12 feet away. The outside glass of the top oven was spider-webbed and had apparently exploded. Nothing had come into contact with the oven and nobody had been in the room with it for over an hour, it just randomly exploded. I am going to contact Whirlpool but judging by the other posts I dont expect much help from them.

The oven steam cleans the oven but it only cleans the bottom, not the sides, back or door. They dont recommend oven cleaner so how do you clean it? My oven is a year old and looks like its never been cleaned. You would be better off with non cleaning oven and using oven cleaner. It would be less work. Horrible stove.

Whirlpool Range Model XFE381LVS - 12/13/2014 4:30PM Wife was cooking dinner and turned oven on. Smoke started coming out of the back and called me. I ran to the breaker panel and turned off the breaker. Back to the stove, pulled it out and smoke still coming out in back at the top. I could see fire in the top of the back panel. Slowly the fire went out. Unplugged the stove, I removed the back panel, wires were still smoldering and the Control panel was burned thru. Took pictures so I could contact Whirlpool Monday. The Electrical control panel is destroyed as well as many wires. Glad we were home and oven was not left on while we were out in the yard or Home could have been destroyed. Purchased the stove from Lowes 11/02/2010 with a extended warranty. Tried to add receipt but would not accept, wrong type doc.

I have purchased many Whirlpool ranges for my apartment buildings that I own and operate. They never give me a problem with operation or length of service. I only have to replace them when a tenant does something dastardly to them. My husband and I remodeled our kitchen and we purchased one for our kitchen too!

We purchased a Whirlpool gas range at Home Depot. After less than 2 years the oven would cut off and the time would start flashing. Check on other peoples problems and found out that I was not the only one. Called Whirlpool and the man on the phone told me I could have a problem with the circuit board. Said he could sell me a 1-year warranty to cover service and parts. I think the best thing to do is to buy another oven and not spend any more money on this junk. Never again will I buy Whirlpool or buy appliances from Home Depot

Just about three years old our washing machine started making a horrible noise and soon after a horrible smell. Won’t complete spin and dry. The bearing inside the drum has failed. The pump is making an unusual noise. I see a lot of reviews about this product. I find it strange that it appears to have a good rating at all the advertisers but in reality it’s really a horrible machine. Shame on Whirlpool for our landfills, dumps and recycle bins with absolute garbage plastic and metal Has to be recycled. We have only disposable garbage for appliances.

The most horrible stove I’ve ever owned. The self cleaning oven never worked, the oven whistles while warming, the alert stops working after a few times, there is a razor sharp hidden vent under the dash of stove on which I cut my hand when cleaning. Customer service is nonexistent. Never never never buy Whirlpool.

My Whirlpool microwave broke. Im not sure how or why so today I purchased another 2 actually. Both were too big. The model I purchased is discontinued. I had to remove part of my Marble Backsplash - the turntable is tiny however mic is huge. Work on making microwave for smaller areas. Stick to get or Samsung for a nice size microwave not a Mongo mega oven above your oven.

Got the dreaded 4 flashes LED status - High Temperature Shutdown. Online and vendor documentation says that this condition requires gas valve unit replacement, a $115 option. If your Pilot remains burning, but main burner does not kick in, then a good guess is the circuit board requires a reset. Prior to any further work, test the Thermopile, that is the round item with two blades located below and to the right of the gas valve unit. Move knob on control panel to OFF1) Pull out plug with red and white wires located on front of gas control. 2) Have someone Hold in the control knob on the unit at Pilot, and make sure Pilot flame is burning. 3) Using a multi-meter, set it to millivolt reading, and test voltage across the two wires. Voltage should be greater than 350mV, preferably >500mV. 4) If you get a reading in that range, your Thermopile is good. Turn knob to off position. Do NOT uncouple gas lines. 5) Piezo Igniter wire comes apart, disconnect it. 6) Remove screw that holds front cover. (screw located bottom left as you look at the unit) 7)Cover simply pulls off directly towards you. 8)Remove the screw holding the circuit board to the cover, and remove circuit board by unclipping it - 3 clips, one either side and one at bottom. 9) Unplug the 3 strand thermostat cable, you should now have the circuit board clear. 10) Take a piece of aluminum foil, fold it twice, then lay circuit board on it facing up, do it on top of tank, want it grounded. 11)Using one of the multimeter probes, wrap a piece of foil around it, keeping point free, and ground it too. Then slowly work around the board, touching all the solder connections you see, as well as the chip legs. Pay particular attention to the round objects on the board (capacitors), make sure to ground out each of the solder points, visible either side. (takes about 5- 8 minutes, take your time) 12) Once done, reconnect thermostat cable to board, then reinstall board into cover (dont forget the screw)13) Place cover back into place, screw in cover screw, reattach Piezo wire and black electrical plug with thermopile wires. 14) set Knob to Pilot, get pilot lit (may take a few hits on the Piezo button) and while still holding the knob in, watch to see what LED flashes you get (there will be a 10 second time lapse before it will start to flash) 15) You should either get 1 flash or 7 flashes, that means the board is reset, now turn knob to warm, and see if main burner kicks in. Good luck, and for a half hours work you have saved yourself $$$. PS: If it occurs again, you have sediment build up, need to drain the tank.

I am sure this will be removed quickly... But my advice to my fellow consumers is do not purchase Whirlpool appliances. They do not stand behind their products and they are a nightmare to deal with. I purchased my range (Model WEE730H0D50) May 8, 2017 and from that day the oven never work (the board was out on a brand new product). They arranged a service tech to come out 3 times. Each time the service tech discovered the replace board was damaged. So I have not been able to use my oven since I bought it in May. 3 months later now the stove top stopped working. You would think after all these issues they would replace their product. But nope I have to wait 2 weeks to get this lemon serviced again... I have young children at home which makes things worse...

I bought all my kitchen appliances in Home Depot 4 months ago (April 2014). The wall oven, Whirlpool, never worked. Flamingo Appliances is the name of the company that does services for Whirlpool in my city. They keep changing parts and today is the 3rd visit that the technician will be in my house trying to solve the problem. Customer service in Michigan is DISGUSTING! I probably have to buy another oven because they say they wont replace it if they think its fixable. 3 MONTHS! I will never buy Whirlpool again. I hate them.

I purchased a Whirlpool electric range 18 months ago. Recently, the oven started overheating. The display reads Fault detected. Press start to clear. Pressing start did nothing and the oven door was locked as though it was in the self-clean cycle. We had to trip the circuit breaker to turn the oven off and allow the door to open. The food inside was ruined. After three episodes in one week, I scheduled a service call through the Whirlpool website. When the repairman came, he determined the electronic circuit board was faulty. His suggestion was that I buy a new stove since the repair would cost $425 (the part itself was $280). Not wanting to replace a stove that wasnt 2 years old, I went ahead with the repair. I called Whirlpool to lodge a complaint and although the customer service rep was polite, he basically told me that all electronic appliances fail sooner or later and the company will not stand behind this appliance because its out of its 12-month warranty and I didnt buy the extended warranty. He also told me the company doesnt have any record of this being a common problem or excessive complaints about these ranges. But I see many people on this site with the same problem. I wish I had read this site before I bought this stove. Since I cant afford to replace my appliances every year and a half, this will certainly be my last Whirlpool.

My range was made after this date and needs this Service Bulletin part. Whirlpool refuses to ship at no cost. I have spent money on this already to discover they knew the issue in April 2004 yet sold the range in October 2005. Rena in service stated she is the highest authority at Whirlpool anyone can talk to!

The oven was brand new and the computer went out with the warranty. Replacing the computer, with labor, was as expensive as the range. I have owned several similar ranges made by other brands and have had no major complaints. However, I will never purchase another Whirlpool product again!

I bought a dual oven Whirlpool 2 years back. This range keeps breaking knobs that are such a poor quality. I have bought knobs from Whirlpool 7 times already then got PSEG home service and they are tired with the quality itself. Save your money and buy another make! Poor customer service and the worst experience is what I have gained on buying this make. Have old mother at home and this headache only created more issues to help her with cooking.

I first want to begin by saying that we have been a Whirlpool family for years. I now own a Whirlpool microwave, hot water heater, washer/dryer, Jenn-Air stove and dishwasher. My problem now is with the Cabrio Washer purchased in 2008. I started having problems in 2011 and the same problem has raised its ugly head again. When I try to use the Clean cycle, it starts at a 60-minute cycle and goes down to a 2-minute cycle in 3 minutes without cleaning or even running water into the tub. This time, it made a terrible noise and stopped. The tub was replaced in July 2011 after having the same complaint as above. The repairman said that the mechanism on the tub to fit into the spinning cycle is made of plastic and is not holding up. Also, in March 2012, a new control board was installed. I spoke to Whirlpool Customer Service and they informed me that they did not have any other complaints about the Clean cycle and that I should call the repairman. Luckily, I purchased an extended warranty. I vote a thumbs down on the Cabrio washer.

We bought a new stove from Lowes in 2015 which is a Whirlpool with an AquaLift self-cleaning function. This function is totally useless. We have tried it several times and it does not remove the grime from the oven. We did not even have a very dirty oven. It doesnt clean the sides at all and the bottom is still dirty. I complained to the store and they told me the AquaLift function should be used every time the oven has been used. They recommend that I use a spray for the oven (which is porcelain) and scrub off the dirt. Give me back my old self-cleaning oven with the high heat. This new technology doesnt work.

I purchased a new Whirlpool stove in Feb 2020. First off the oven was not calibrated right and Whirlpool wanted us to do all these tests to see what the problem was. Finally, after purchasing an oven thermometer I finally got my ducks in a row and called them back to which they finally sent out a repairman. Now after almost finishing supper last night the whole cooktop stopped working. It is going to take a week to get someone out to fix it. Also, we have to purchase an extended warranty for our Whirlpool refrigerator every year because it always needs something fixed. Our Whirlpool washer has been on the blink for quite some time (no warranty) and cant afford to get it fixed. When talking to someone at Whirlpool it appears they have no compassion. I guess it is because they are just paid employees. My recommendation is to look into other products before purchasing. Do your homework.

I purchased Whirlpool Slide-In 30 Gas SS Conventional Range. Terrible product quality. After about three years of use, the range shows an error message cooling fan is too low. I wasnt able to use the oven. Abt Services came in to do the repair. One month after the cooling fan was installed, the same message came up again. When Abt Services replaced the cooling fan again, the display was completely out. The cost of the repair parts is over $800. Are you kidding me! I paid $1500 for the range. Now I need to pay $800 to repair. Whirlpool didnt offer any discount for repairing the defective product but offered purchase similar product at a discount price. I will never ever pay a dime for Whirlpool product. It is a nightmare using the product. I learned my lesson. No Whirlpool product again in our house.

I purchased my Whirlpool Double-Oven one year ago and couldnt wait to use my new oven. I was told it was so efficient because I could use the top oven for quick baking instead of heating the entire oven (plus I could set it at different temperature settings). About a month in, I cooked 2 pizzas side by side. The first one burnt to a crisp and the one right beside it was doughy on top and burnt on the bottom. Not thinking, I blamed the pizzas! I also blamed myself, thinking it was me not being used to the stove.A few weeks later, I baked cupcakes. About 15 minutes in, I smelled burning and the cupcakes were raw on top and burnt black on the bottom. I called Whirlpool and they sent a technician out and he replaced the circuit board/clock. Worked for a couple of weeks and then the burning began again. Called Whirlpool again - another technician came out and adjusted the temperature. Here I am again, had to call Whirlpool again.This stove has been so inconsistent and Im so tired of wasting food because of this stove. My 4-year old Whirlpool dryer also went out last week so needless to say, Im not very fond of Whirlpool right now! If you are planning on buying a Whirlpool product, buyer beware and I hope you have a lot of patience...

We have had our Whirlpool range for probably 20 years. We have never had any issues or problems with it. Our washer and dryer are both Whirlpool too. I would recommend this brand 100%! I think this is the brand that my mom always had too. Their products are very well made and last forever (it seems like they do!).

Purchased Whirlpool free standing smooth top range at Sears Outlet (scratch & dent) in Columbus, OH on December 8, 2012 for a rental property. On May 18, 2014, tenant said she turned the oven on to preheat and turned on one of the front burners. She said she was at the sink preparing food and heard a loud noise; turned around and there were flames coming from the top of the stove. This didnt sound logical so I called fire department and spoke with one of the firemen. He said there was no evidence of anything in the oven or on top of the stove. Tenant said only thing she noticed is that there was a clicking noise coming from the stove a few days prior. After reading all of these complaints, I dont think I will buy another smooth top Whirlpool electric range. Luckily no one was hurt.

This thing will not bake correctly, leaves pie bottoms raw, yes we use convection. We have tried everything to get it to bake correctly but to no avail. Top and control panel get very hot when only using oven. This thing is junk, taking it back to Lowes.

Purchased range 10-26-12. Had 3 service calls first year. 1st time, it started. When service guy came a few months later, same problem. A new igniter was installed. 3rd time, another igniter was installed. My year warranty had run out but still had same problem. Asked for a new range, was rejected. Im afraid if burner is lit, had we try to start oven we are going to have explosion.

I have a washer, dryer, dishwasher, hood vent, stove top, and oven, all Whirlpool. I cant say enough how pleased I am with this product. My old washer and dryer was over 23 years old when I needed to replace them. Thank you Whirlpool for making such a quality product.

On July 19, I was forced to buy a new washer. Bought a Frigidaire which, when connected to the water supply, started immediately dumping water into the drum. Sent this defective washer back to the retailer and chose a new Whirlpool. O-M-I-G-O-S-H! It was delivered on 25 July and despite having 4 temperature settings, it only worked on either hot or cold AND you could never tell what temperature was going to be chosen by this computerized wonder. I repeatedly called Customer Support and received three different answers on what temperature was considered warm. The answers ranged from 65 to 102 degrees. Also, you could open the lid when the water was running in, which washers are no longer supposed to do. Whirlpool then arranged for A & D Service to come and repair my NEW washer and scheduled an appointment for a week later. I was forced to call that company to find out if they were even coming. When they did not show as promised, I cancelled the appointment and called Whirlpool to ask for another service company. They then scheduled me for two weeks later (now August 30th). The guy did come and told me there was user error - I had used too much soap as this was an HE washer. I asked him to show me where on the appliance and in the owners manual that it stated the washer was an HE. He couldnt find it either and said he would replace the computer and the door lock because his computer found that the washer was hit and miss on anything it was set on. At any rate, it is a little over a week later and I have heard nothing from the repairman and, of course, no follow-up from Whirlpool. Do not make the mistake of buying any Whirlpool product, and that now encompasses names such as Maytag, Amana, Jenn-Air, Kitchen-Aid and many more if you want to be assured of a quality product and excellent customer service. What if this had been a refrigerator? The whole debacle has been a nightmare. Wish I had bought a GE!

Bought the oven Model RBS275PRS 7 years ago. Since then door handle broke 4 times! Control panel had to be replaced once. Paid $750. Spent over $500 in repair. Now handle broke again but part discontinued. Can throw the oven away...

Brought a five burner Whirlpool range on June 9, 2018. On Christmas Eve the door fell off and I had a house of 20 guest. Couldn’t cook at all, and cook Christmas either. Call them immediately on December 26, 2018. They set up a schedule for the following week on Monday. The man showed up. Could not believe how this could happen is that he had ordered me a whole new. Dealer said it will be back on Thursday or Friday that week. The serviceman still hasn’t called and it’s Friday. Called the serviceman no answer so here I go another week or two with no oven. The oven door fell when I opened it to take food out and fell in my legs. Have a nice black and blue. Maybe I should think of suing them instead of getting it fixed.

We purchased a 4 piece set of Whirlpool kitchen appliances and have minor to major problems with 3 out of the 4. We had problems with our gas range/oven from the start. When I called to register the brand new range they told me it had been previously registered to someone else and they made me fax my receipt to them proving that the appliance was purchased new. Lowes said it was brand new in the box when I purchased it leading me to believe Whirlpool tried to pass off a refurbished product onto Lowes and then onto us. No surprise when the stove stopped working 3 times in barely over a year. It was so defective Lowes ended up replacing it for us. Not Whirlpool... they only argued with me about how the third time it was out of warranty and offered no help in fixing or replacing the defective oven. Now our ice maker just stopped dispensing ice 7 days after our warranty expired on our refrigerator model # WRS586FLDM00. Whirlpool will only agree to cover parts and is sticking us with the service call and labor! And thats not all... the plastic coating on the dishwasher racks started coming off exposing rusty metal when it was barely over a year old and I have received a postcard indicating there is a lawsuit involving our model for overheating and fire events! Now waiting for that to be our next issue. I am so disgusted with Whirlpool. We bought Whirlpool appliances believing they were quality products. They are quite the opposite. Wish I had researched their reputation and history of complaints before buying. Do not recommend Whirlpool Brand. Sincerely, Disgusted in California

My Whirlpool gas range was installed in December 2008. The control panel for the oven has now died for the third time! Push the buttons to set the temperature and nothing happens. The first time the control panel died, Whirlpool replaced the parts. The second time it happened (6 months later), they didnt want to hear from me. The oven worked satisfactorily for about three years and here we are again. It will be about $500 to fix the problem which clearly is not an isolated issue as I have seen this same complaint raised a number of times. Looks like its time for a new gas range. My dilemma is that I have the greatest serviceman who exists... and he only sells and services Whirlpool. But...thanks to Whirlpool, hes probably losing some business.

Purchased double range ovens. Enamel is flaking off within 2 years. Whirlpool denies defect. They wont replace it. Any other folks with similar problems? What can I do to have it replaced? I remember the old ovens and how the enamel just stayed and stayed and stayed. Never a rust or flaking issue in those old time models. Any expertise on how the enameling process may be compromised in the newer manufacturing process (cutting corners or costs). Any options for a class action here if a commonly experienced occurrence? If similar experience drops comments/review below as a one liner - just state enamel defect. That way can figure out the number of folks with issues. Id like to take action if given the opportunity, and more so if this is a common occurrence. Lawyers are costly for one-off complaints, but there is power in numbers (think United Airlines).

In 2015 door of top loading washer (Whirlpool Cabrio Washer) needed total replacement. Lucky I had an extended warranty. 2018 March, extended warranty expired and now have the exact same problem. Pretty crummy product if major part like a door has to be replaced every 3-4 years. We do not wash large items like blankets/quilts in this machine. That goes to a laundromat where there are oversized machines or to a dry cleaner. So the only reason for this breakage is a default in the lid assembly. There is only one phone number for customer service, repair, parts etc. Put in my service call and filed a complaint at same time hoping for at least a small discount. Ha! $100 plus tax for service call- part price ranges from $150-230 plus tax. Whirlpool could tell me the part exists but would not say how long it takes to get it! Do NOT buy Whirlpool washer with top load lid that has glass window. Big problem is that Whirlpool now has Jenn-Air, KitchenAid, Maytag and Amana all under their umbrella.

Dishwasher is 15 years old and still going strong. Minor leak which disappeared when I cleaned the gasket. Good internal arrangement for fitting dishes & silverware. One of the best appliances I ever got!

We built 8 years ago, with ALL new appliances...All Whirlpool Gold...been very unsatisfied with ALL appliances... Had to replace range and parts for refrigerator..And extendend warranties all nonusable..We live NM off a tarred county road by 1/4 mile...no one wants to even come and look. Not good.

I purchased whirlpool Model# WFG540H0ES gas with convection. I purchased it because the price was $1000 dollars less than comparable ovens and even now the price has gone up $300 since I purchased it. I really wanted the luxe look at a discount price, a burner that you could lay a grill over, and five burners which it provided all of those things. I hesitated to buy this oven because the door fell off the last Whirlpool within three years and they refused to fix it so I tried not to buy this brand but it had the amenities I wanted for the price I could afford. I really like the oven. I like the oven the best because it really does make a great cake. I like the two large grates that sit across the oven. It makes it feel high end. If you dont wipe the range immediately grease gets stuck on the range and is hard to clean. This is what I like the least. Im ready to wipe on the weekend and its too late. It took me four days of internet comparison to decide on this one. The house is not painted, the cabinets are falling off the wall literally but I am extremely proud of this oven and it makes me feel affluent even though Im not.

I am concerned that Whirlpool microwaves installed over the stove have extremely faulty doors. I have two homes in which I have Whirlpool microwaves, and both have huge cracks in the door and small pieces inside the doors beginning to fall out. It deeply concerns me that it will cost more to replace the doors than to replace the microwaves. I have always believed in Whirlpool appliances but now feel that I will have to change brands. My question is “What in the world is wrong with your doors that they crack so easily and the company holds no responsibility with such faulty work?” I would simply think that this was just a faulty door on my microwave, but I have two that are cracked! This definitely means you have a faulty product.

Cannot reinstall oven door after glass cleaning. The worst design and absolutely no support from Whirpool. They said the instructions are in the Manual. NOT TRUE!!!. The person on their helpline said she did herself. It is simple.. Total BS. Here is the link to hope to maybe get it fixed: ** Worst stove ever.

Remember the old movie classic Network, with the line, Im mad as hell and Im not going to take it anymore? Well, that is me and my new self-cleaning Whirlpool ranges that requires a manual cleaning kit (provided by Whirlpool after my purchase). I am angry enough that I have approached an attorney and I hope that if you have your own story about an AquaLift fail, you will include it on my website **. Thanks...

Purchased the Whirlpool electric range with aqua lift technology. Have the stove for 21/2 yrs and have tried contacting Whirlpool on numerous occasions. Email and telephone. Only response I get from them, is that Im doing something wrong. How can you do anything wrong? Add water, push button. I finally put in a call to World Headquarters but had to leave message and nobody has returned call. I finally called a whirlpool serviceman and he told me the Aqua lift is not a true self cleaning oven. The temperatures dont get hot enough. It was meant to just loosen the dirt on the bottom and then you have to scrub. The button you press to start the process on the stove states SELF CLEANING. I believe they have mislead the public with their advertising. Im thinking about any options I may have.

I purchased a Whirlpool range YGY399LXUQ in 2012 from a great local appliance store, Trail Appliances. In 2013 the control panel stopped working and I contacted Trail. They quickly came out and replaced the control panel. In 2014 the same issue came up, but Trail could and would not do anything so I contacted Whirlpool Directly - they came out and replaced the control panel. In 2015 (same month) the control panel is not working AGAIN and Whirlpool has washed their hands of it. A replacement is over $400 + installation. The stove is barely worth that much. I would have thought that they would stand behind their product, in that this is an obvious continual issue or at the very least the service that they provide. I would not recommend their ranges to anyone because they will not stand behind what they product nor will I ever purchase anything that Whirlpool makes as it is obviously low quality.

Aqualift self clean oven??? I followed the directions on how to clean my oven. I wiped and scraped out spilled residue from the oven. Then started the cleaning process. The sides of the oven were not cleaned even when I wiped them with a damp cloth. Scrubbing and scraping with the tools that came with the oven helped somewhat. The bottom of the oven was not cleaned. I had to continually scrub and scrape to get it looking half clean and even then, there were still spots that would not clean away. I would have preferred an oven that uses oven cleaner, it gets the oven much cleaner and with less scrubbing on my part. All in all I am very dissatisfied with the oven and would never recommend it.

I had purchased a microwave oven on 18 April 11 and they delivered it to me without accessories. As I was a first time user, I didnt have any idea that the accessories are available with the oven. However, when I came to know after 5 months, I asked them about it and they did not respond to me properly. Even when a Whirlpool engineer visited my residence, he did not ask for the accessories for the demo purpose.The warranty paper has not been filled out by the dealer or the engineer; it is still blank. I tried to put a complaint through the customer care number but they did not respond to me properly.

On 3/31/2012, we purchased a Whirlpool refrigerator (model #ED5FVGXWS07, serial #HR14602963) from the electronic appliance store called SuperCo, located at 17523 Colima Road, City of Industry, CA. Within around a month, we noticed that things kept in the refrigerator all showed weird phenomena; raw eggs were frozen inside the shells and ice is frozen on food and utensils stored, not in the freezer, but on the fridge side. At the same time, all food kept in the refrigerator turned bad easily, especially during summer time. Cooked food went bad and had a bad smell within just three days of being kept in the fridge. Also, the ventilator-like part on top of the fridge (the part which released cold air) had ice frozen around it from time to time.Obviously, the fridge was not working, as the freezer was not cold enough and the side was either making food turn bad or causing ice to freeze on stuff kept inside. The temperature seemed to be extremely uneven inside. We then asked SuperCo for repairs or a replacement, but they refused and referred us back to the manufacturer, Whirlpool. Repair services have been called three times on 2012, according to the paperwork records I have: a) on 5/31/2012, bad damper was broken and replaced; b) on 6/7/2012, (according to paper records from SuperCo), replaced parts; and c) on 6/20/2012, turned ice maker off and cleaned (the hand writing was hard to read).Then, around December of 2012, after the services, we experienced another great problem with this fridge again. When ice cream was kept in the freezer, they appear to have melted and my brother suffered from diarrhea after eating the ice cream. The ventilator-like part on top of the fridge still had ice frozen around it. We then took pictures as fresh vegetables kept at the bottom drawer of the fridge had ice frozen on it, too. I finally emailed Whirlpool through their official website on 2/7/2013 and asked for a new fridge replacement based on the Lemon Rule. An e-solutions specialist, Judy, replied that the product was warranted for a specified time period for repairs, not the replacement of the product, and Whirlpool declined my request for a replacement.Repair service was then requested by me for the fourth time, through email. On 2/21/2013, this fourth repair company came and checked the fridge. After a detailed inspection, the technician concluded that some parts of the fridge needed to be replaced, one of the parts called the thermostat. Strangely, after he called his company, he changed all that he said before and claimed that the fridge was 100% working and that no repairs were needed at all. Even when we showed him the frozen vegetables from the fridge side that we got recently, he insisted that the fridge had no problems at all and left.The way Whirlpool responded to my request was extremely disappointing, with their refusal to replace the fridge after three complete repair visits, and the fourth visit changing the inspection conclusion with no reason. Of course, the disappointment is greatest with the extremely bad quality of this electronic appliance. As of this moment, my fridge could still not keep food well and is causing us bad health. I think the only way I could go to now is to take action against the company for the lemon refrigerator, for breach of warranty, and maybe fraud.

Our refrigerator is only 18 months old, a Whirlpool Gold gx5htxvyo5. It was sold to us believing it was stainless steel. There is no way scratches come from nowhere. We have a Whirlpool dishwasher and stove in stainless steel. You cant compare how much better they are. Im very dissatisfied. Wed like to have new doors. Something is very wrong with the finish on these doors.

After 14 years of good service with Whirlpool Duet front load washer dryer set, wife chose Whirlpool kitchen appliances as part of a kitchen update project. All matching fridge, range, microwave hood and dishwasher. What a nightmare! The icemaker growls and whines all the time and the dishwasher was broken before being packaged at the manufacturer. A wheel from the middle rack was missing when the dishwasher was opened. It wasnt in the sealed dishwasher nor in the box. So it had to have been broken off before the item was boxed. We called for warranty claim and A-1 Appliance was recommended out of Shreveport, LA. In a few weeks he showed up, looked at the rack for a while and said Ill have to order a new part. I said fine. (How hard can that be? Right?) So here we are 5 months later, unable to use the middle rack because it cant hold any weight with the roller missing. Multiple calls to Whirlpool and A1 and we keep getting promises and runarounds that turn out to be lies. How hard is it to say go to your local Lowes and well authorize them to give to give you a rack from an in-stock dishwasher? Let Lowes wait on the new part! Sounds simple, and any other company would have done that, or told us to return it to Lowes for another one. But NO! Whirlpool just whines about being behind on parts, shorthanded, or lies about the part is in and its A1s problem now.So, today, same story. A1 says they need 2 parts. **! Its one part. Whirlpool says A1 has the needed part. Same old runaround. So, we just replaced our 14 year old washer and dryer with NON Whirlpool units. $2500 more in of appliances that Whirlpool could have gotten, but Im guessing they dont even care about missing and losing sells. They certainly do not care about warranty, parts, quality, customer satisfaction or repeat customers. Never again with Whirlpool! Beware!

Two years ago, we purchased a Whirlpool Cabrio Washing Machine from Sears. All of a sudden, it was making sounds in the spin cycle that sounded like a jet airplane taking off. It was terribly loud. We called repair technician, which cost $90, only to find out that the bearing is gone and its going to cost over $500 to fix it. This is absolutely ridiculous! We expected it to last several years, only to find out that we would have to spend almost as much as the washer originally cost in order to fix it. We paid $700 for this machine, two years ago, and I can say that Ive never been more disappointed with a product in my life. My previous washer lasted thirteen years, not to mention my dryer and stove fifteen years, with minimal repairs. I will never buy another Whirlpool appliance again. I have read some other complaints on this consumer affairs website, as well as other sites, regarding this same washer with the same problem on the bearing and cost to repair. If anything, I think Whirlpool should make good on this product and offer something regarding a recall or payment for repair in some form. As far as Im concerned, I will alert everyone I know about Whirlpool appliances and advise them not to purchase it. Now, I either have to pay over $500 to repair my washer or go buy another one. I do not even want this Whirlpool appliance in my house when I can get a washer for cheaper than the cost to repair it.

My Whirlpool super capacity 465 started flaking out on the temperature and burned our dinner. I had a repairman over to repair which he did after about 3 hours of testing. Less than 6 months later it did the same thing. Overheating in the oven.

Moved to new house with new Whirlpool appliances, including oven, in August, 2015. I did not cook in oven at all until Thanksgiving meal. Had something spill over in oven. Spillover caught fire. Oven at 350 degrees. Complained to Whirlpool. A supervisor told me that it is normal for spillover to catch fire. They sent out a tech to check oven, and said I would be responsible for paying tech. The tech explained that unlike conventional ovens, this oven has heating elements outside of oven, so to get to the temperature of 350 degrees, the heat at the bottom of oven can get to over 550 degrees. He could not get Whirlpool to replace oven. I didnt have to pay, but now I am afraid to use it. Some of the finish on the inside of the oven was burned away, so it is not like I can trade it in. I feel the oven has a defective design if spillovers are supposed to catch fire while you are cooking, and the finish gets damaged. I will never buy another Whirlpool appliance again, if I can help it.

I purchased the Front-Loader Duet in June of 2008. Like many of the consumers here, my machine began making a thunderous sound during the spin cycle. I contacted Whirlpool and arranged for service. The service call was $129, the estimate was over $1100 to repair (bad bearing). The machine originally cost $899 plus tax. I called customer service to complain. I had owned two top-loader Whirlpool machines; one for 15 years, the other for 12 years with no service calls ever needed. How can Whirlpool possibly justify what is obviously a design defect by telling me that I should have bought an extended warranty? I replied that in my experience, an extended warranty is an unnecessary expense for a Whirlpool product.

We moved to a new home with all new Whirlpool appliances. We have been here 4 weeks and so far the stove has had a faulty part replaced in oven and now my microwave will not fully pop popcorn. Wonder what to expect next?? If you have a choice dont buy this brand. Inferior product.

Whirlpool 2 Cu. Ft. Stainless Steel Over-the-Range Microwave - My wife and I have just remodeled our kitchen and we bought all the Whirlpool appliances, fridge, stove and microwave. We have had them for about 3 weeks now and now the display on the microwave just stop working. I just cant believe this. Its going to be a real pain now to remove this and replace it. Has anybody else had this problem and I wonder if its even covered under its warranty.

Within 10 days of installing our new Electric range the cooktop does not look new and although we have used the prescribed cleaning methods, will not remove some cooked on spills over one burner and another burner has white rings around the glass above the dual zone cooking element. While we did not choose the top-of-line model; had expected much greater durability and appearance for our new range. My call into Whirlpool service made me feel like mine was an extremely isolated case and yet nothing would be covered as would be classified as customer fault. Highly disappointing as the cooktop on the range that we replaced seemed so much more durable.

We purchased a new Whirlpool Cooker (Model Number YWFE745HOFH2) in June 2021. Our first disappointment came when we used the Self Clean function to clean the oven. Unlike our previous Whirlpool cooker (which we were very pleased with) this required us to put water into the bottom section of the oven. After the advised time the oven was exactly the same as at the start of the process. For readers of this review I would like to stress that the oven was not excessively soiled. We just wanted to try out the feature. In August my wife dropped a ceramic cup onto the cooker top and the top shattered completely. This, of course, was not the fault of Whirlpool, but we were shocked that the damage was so extensive. A new cooker top was ordered and arrived at the beginning of October (dispatch problems). After each use of the cooker top it has been cleaned with a recommended cleaning product. Today I accidentally allowed a pot of rice to boil over and, although I immediately removed the pot from the cooker top and wiped both the bottom of the pot and the top before continuing, the residue will not come off of the surface. It looks awful! We had our last cooker for over 10 years - if I could afford to I would get rid of this product tomorrow!

The oven is a joke. It does not self-clean. I have to buy oven cleaner and clean the oven like in the distant past. They are lying about it being self-cleaning. Do yourself a favor and buy a real self-cleaning oven. NEVER WHIRLPOOL.

I purchased a Whirlpool microwave oven from American Furniture/TV in Fenton, Missouri on 11-13-2010. It had a Whirlpool 1 year warranty and a Performance Guarantee for five years. I noticed recently that the plastic on the door had hairline cracks near the handle and now is beginning to crack around the glass on the front door. I called American when I noticed the cracks by the handle and was told that it was cosmetic and not covered. Now the cracks around the glass may be a bigger problem if they let fumes out from the microwave. I am waiting for a second answer from American. I feel like the problem is with the plastic itself.

Whirlpool electric range oven wont turn off. Used the oven 2 or so times per year.... Very unsafe, expecting internal breaker that would shut the thing down. Whirlpool Range/Oven PT3196685 happened on 6-10-2014, was baking cookies with timer on for 9 min. First batch turn out good, 2nd batch on fire before even get to 6 min, the burner is brightly hot and cant shut off from the panel... Saw ERR then COOL indicator... Tried but no respond from panel. The burner element wont turn off and temp keep rising white hot... The only way to shutoff is the house circuit breaker. But soon you turn on the breaker, the oven would turn on by itself and you cant switch it off. Where is the safety breaker on these range/oven when something goes beyond 500 degree..... UNSAFE PRODUCT. Ordered a new Whirlpool Gold 700 series but canceled after discovered others experienced similar situation with the new product. Could have burn down the house and worst when lives involved. WONDER IF ANYTHING WAS DONE TO CORRECT THESE SAFETY ISSUE.

This is my first electric range. It’s amazing! It cooks evenly and at the exact temperature! The stovetop has size adjusted burners, again at the precise temperature. And the look is very sleek & modern, perfect for a new kitchen! I am so very pleased.

What a disaster! Within one year we had to repair the stove twice, the dishwasher and the fridge! Almost three years later, we are experiencing problems with two burners and with the fridge! The company does not stand behind its products. Avoid them.

In July I purchased a Whirlpool Gold oven and cooktop from Lowe’s. It was delivered in Aug. after a 5 wk wait, since it had to be ordered. Since installation, the hot surface light on the cooktop stays on. I called in & was told to try resetting the elec. breaker. Did that... still stays on. Model G7CE3034XB00, Serial D43005649. On Sept. 4th I called & spoke to Carrie (I believe in TN) who told me she would try to find a service tech in my area & would get back to me in 3-5 days. Apx. 5 days later she called & left a message on my cell phone stating that she could not locate a service tech in my area. I would need to find my own service tech & submit any invoices to the resource dept for reimbursement. Parts could be ordered at no charge. I have nothing in writing from the company to confirm I would be reimbursed, nor was I told how to correspond with the resource dept in the event I had an invoice to submit for reimbursement.Today, Sept. 18th, 2014, I called Whirlpool again (800-253-1301) & talked to Stephanie in Michigan. She told me the same info. When I asked to be sent a wiring schematic I was told I didnt need one. When I asked how to get in touch with the resource dept. I was given a fax no. & email acct. When I asked how I was supposed to get in touch if I didnt have either, she said I should go to the local library. Now lets imagine for a moment that I am disabled or live so far out in the country that I cannot get to the library... How am I supposed to get to a fax or email acct. Has anyone at Whirlpool considered that? This is a new appliance under full warranty, yet it has become my job to find a service tech, pay up front, & wait for reimbursement. REALLY??? I am also in the market for a new dishwasher & you can bet it wont be a Whirlpool!

My oven is less than 2 years old. The blue enamel has had cracks for over a year & was told its cosmetic & theres nothing that they can do about that. Now its starting to pop off. I found a few slivers in a vegetable dish! Now I cant even use the top oven because of this! It seems to only affect the bottom of the top oven. I feel that the temp may be getting too hot for the blue enamel which is another safety concern. I have contacted Whirlpool/KitchenAid to be told that if they send out a repair person he would just use a marker on chips. I was told they would give me an employee discount from $3000 to $1800 to replace but I would have to act right away for that price! Really? My oven is only 1 & a half old.When I started researching this problem I am having I found many complaints of people having the same problem! As a consumer I feel so mad & frustrated that they are not doing anything about this since its an ongoing complaint from so many dissatisfied consumers. I do believe it is a safety & health risk now that its showing up in the food that has been cooked in that oven. I would urge anyone thinking of buying a Whirlpool/KitchenAid cobalt blue enamel oven not to! They will not stand behind their product & you will have to replace at your own expense. Shame on you Whirlpool!

We bought our stainless and black Whirlpool stove last month. We love that its black topped, and doesnt show dirt. We love how the oven door seals, and the fast heat. What we do NOT love, is how easily the knobs turn. You barely brush against them, and gas leaking into the kitchen. I called for service. Our guy said yes, they turn easier than most of the stoves he has worked on. He called tech support from my kitchen, and I overheard the guy at the other end. His response was dismissive. I have had gas ovens for 20 years. They have without exception, had a spring type feeling to the knob. This stove has none. I am writing this so that if others are experiencing the same thing, they will see it is not their imagination. Something is wrong with the design of the knobs or some part is missing.

My three month old Whirlpool electric range caught on fire last night. The wiring that connects to the electrical cord to the stove shorted and melted. Thank God we were up and smelled it and quickly pulled the stove out and unplugged it. Had the fire dept out this morning and they verified that it was the stove and not house wiring. Now, I am without a stove, out of my money and waiting on the mercy of Whirlpool to take care of this situation. I do not want this stove in my house so I wont accept repair. Not sure I want another Whirlpool either. If this had happened during our sleep time, the whole house could have burned down. So upset and inconvenienced.

4 year old gas range, used self clean mode yesterday, for first time, upon completion opened oven door, not very clean and found 1/2 moon shaped raised crack in center of oven floor. Customer service insisting repair tech must come at cost of $60.00 to determine cause. I believe this is manufacturing defect, that they are not willing to admit. Offered big discount on new range. NO MORE WHIRLPOOL FOR ME!!!