This was the first new appliance that I had actually ever had and I purchased it in October of 2010. After four months, it started make a grinding sound. I called Whirlpool and the repair man replaced the motor. Approximately four months after that, the lid got stuck and the machine would not respond. Same routine as before, but this time the transmission was replaced. While the machine was apart, I noticed the white insulating panel from the bottom was brown in a spot and looked as if it had gotten hot. A month before the 1 year warranty expired, the washer started making an intermittent grinding sound nearly identical to the sound made when the motor went out. This time a different service company was sent out my Whirlpool and the said that nothing was wrong. Now, the machine is out of warranty and has stopped cleaning close and during the spin cycle the you can hear water running into the machine constantly. Last months water bill shows a 40% increase in water consumption when nothing has changed to incur a larger bill. Seeing all these comments makes me wonder why the heck nothing is being done to force recalls on such poor products. Consumers should be treated with a lot more respect than this. I will never recommend a Whirlpool product to anyone I meet. In fact, I will strongly discourage anyone who is contemplating buying a Whirlpool washer machine.

Its very noisy, and there are no blankets to purchase to deaden the noise. The dishes all need to be dried by hand. Some of the dishes come out dirty. I would never purchase another Whirlpool dishwasher.

I have bought Whirlpool washer (small size) and dryer less than 2 years ago. The washer started to develop an error f6, as it shown. Finally, machine could not work as far as warranty was expired. The Sears technician made very quick overlook and told that probably engine was gone and advised to buy a new machine, as repairing parts are not available in Canada. He charged me 96 dollars for that.

We purchased a top loader Whirlpool Cabrio Platinum Washer and within a few short months noticed a mildew-like smell emanating from it. This is DESPITE the fact that we leave the top up the entire time that the machine is not in use, we use hydrogen peroxide and ammonia in our loads of laundry in order to kill any mold present and my husband painstakingly hand dries the interior of the drum after each load of laundry. He also puts hydrogen peroxide in the fabric softener dispenser in an effort to kill the mold/mildew. None of this has helped to mitigate the ongoing mildew/mold odor. We have run across other online reviews which suggest that the Cabrio does not fully drain the water in the washer leading to the potential for the development of mold and mildew. This is very upsetting as we paid a lot of money for the Cabrio and had high hopes for it.

I bought a Whirlpool Duet Front Load Washer in 2008 and it began showing F71 and F70 error code in 2011. I paid approximately $1,000 for the machine. The washer wont finish the cycles and often wont start. When I press the power button, I hear the 3 beeps and after a while, shows the F71 error over and over. The information I gathered online indicates that many people have the same problem. The repair cost is at least $550 to replace the user interface circuit board and is no guarantee. This is ridiculous.How could GE sell consumers this kind of junk that fails to work only after 2 years. I had a top loader for 12 years with no problems, not a single repair call. My wife and I are extremely frustrated with piles of dirty clothes and no washer to clean them. I want GE to refund the cost of the washer on a 10-year prorated basis. This is only fair.

My wife and I spent about $2500 on a new Whirlpool Dutch Door fridge five years ago. 18 months later the evaporator went out and the warranty was only good for one year! We bought an extended warranty, got it fixed and the other evaporator went out less than a year later after that! Next, the circuit board control on the crisper went out. Then, the water filter would not disengage and a repairman had to take the fridge apart just to put in a new filter! And now, the ice-maker has gone out and the fan is icing up like another evaporator is going... Insane! Our warranty is up next year. Once the warranty ends we will start shopping for another unit - and it wont be a Whirlpool - thats for sure. I have never owned anything this unreliable in my entire life! Also, I would say most of the time we have owned this piece of you-know-what it has made a loud disturbing fan noise... What a waste of good money! Run! Run far, far away!!!

Whirlpool Cabrio. A little noisy, 2 or 3 years, do exactly what the manufacturer says they will do. Start them up, run them, go get the finished product... The previous set, same brand lasted us 15 years and then went on to help someone else. Still have the same dishwasher, Whirlpool, 11 years, no repairs, no breakdowns. Bought refrigerator, and micro-wave also, several years back. No problems, no service calls, no stops.

Duet Washer GHW9150PH0 - The washer is about nine years old. Last year I got the dreaded F-11 error code, and had to purchase a new controller board and install it. Now the spider arm on the basket has snapped (cast part). Ive been on the phone with Whirlpool for over a half hour now, and all I get is We have to send a service tech out, and you have to pay for them. I have the broken part in hand, I know the Whirlpool part number, yet they want me to pay for a tech to come see the part and confirm it. Ive been unable to talk to a manager yet, none are available.Eventually the lady agreed to replace the broken basket, after telling me at least five times she could not, but she refused to replace the tub which was destroyed when the basket broke. Ill be calling back to talk to another agent soon.

My dishwasher is 4 months old and is having some electrical issues. I have had to call into customer service 3 time to try to get a service call. Two of the service calls did not show up. To this Whirlpool said it was not their responsibility. From my experience Whirlpool does not care that the service calls are weeks out, or that the dishwasher does not work.

Bought this unit for our daughter that lives in a apartment building. She loves it and keeping her cool at night.

Im a member of Costco. I trusted that they will sell me a decent refrigerator, wrong! I bought a French Door refrigerator by Whirlpool on March 2018. It freezes my food on the left compartment and on the middle compartment. I called since its under the one year warranty. They came 8 times already and changed parts and promised me every time they came that this will resolved the problem... still the same. I have been in the phone with Whirlpool for one hour and a half for 5 times and they still want to do more tests. I will never buy another Whirlpool unit again! Costco should be ashamed of selling this brand! And they should paid for this also.

I bought this appliance 9 months ago and it has broke 4 times now for the exact same reason. I have set aside 6 separate 4 hour windows for Diamond Factory service to come repair it. All four times, it has been repaired improperly or diagnosed as “nothing wrong with it”. My refrigerator constantly runs, eventually forms an ice wall of back of freezer, and then eventually ice gets so thick to where it stops regulating temperature. All four times, I have had to throw away all my food, defrost the fridge on my brand new hardword floors, and take off work so I can be home for these 4 hour window “service repairs”. They refuse to replace the appliance. UNBELIEVABLE. Never purchasing from Whirlpool or Home Depot in Sunset Hills again.

We purchased a Whirlpool Cabrio Washer approximately 4 years ago thinking we were purchasing a top-of-the-line washer. The first year went great. I was very impressed with how it washed. My clothes came out cleaner than ever before; I loved it. But shortly after the warranty expired, one of the water pumps began leaking out all over the floor. We found out that a coin had passed through the barrel down into the pump and caused the plastic pump to crack with the high speed spin. We replaced that pump at a cost of over $100. We shopped around to find the part as reasonable as possible. The machine worked fine for about another 10 months, then it happened again. The new pump began spitting out water all over the floor. So again, we found another coin, another crack in the pump and again replaced it, another $100+. Finally, a third time, it was the same thing; the pump cracked due to a coin. This time, it was the pump on the opposite side, but still, water was all over the floor. This time, we ordered the part through Whirlpool and complained about this happening for a third time. My husband asked them about the Lemon Law and he was told that he would have had to purchase all of the pumps through Whirlpool. What does that have to do with it? We bought the pumps where we could afford them! The washer cost about $700 to begin with, and within 4 years, weve spent approx. $400 more? Thats not the end of it though. Now we are hearing loud noises and there is water all over the floor again every time you wash. This time, its not the pumps though. It appears that it has something to do with the bearings and maybe a seal somewhere around the barrel itself. But you can hear something knocking around - it sounds almost like a nut. We are going to call a local repairman to come and look at it tomorrow. This is just ridiculous. I feel like weve been completely duped over this purchase. The salesman talked this up like it was the cream of the crop and weve had nothing but problems. My last washing machine was a Kenmore and it lasted nearly 15 years and not once did I have to call a repairman or buy parts for it! Guess what Im going to buy again? If Whirlpool would just acknowledge these problems and fix them for people, it might renew faith in your company. I know I dont know the inner workings of a washing machine, but it seems to me that a screen prior to the pumps to keep coins from entering the pumps wouldve been a very cheap fix to a huge problem. I also own the Cabrio dryer and have hated it since the day I got it. It never dry things with one cycle. I always have to run it a second time. Knock on wood though, I have never had any breakdowns with that. I can guarantee my next buy will not be Whirlpool, nor will I pick expensive models again. I bought the cheap stuff years ago and it lasted forever! Im very nervous because I bought a Whirlpool fridge last year and I am praying I have no problems with that!

We ordered the Whirlpool 6.4 CuFt Electric Slide-in Range WEE745HOFS from Costco on 1/3/2017. It was delivered 2 weeks later. The FIRST time we turned on the oven the top heating element caught fire during the preheat and damaged the interior of the oven! The interior paint was completely burned off above the fire, exposing the raw metal. Costco called Whirlpool for us to ask for a replacement oven. Whirlpool refused. We called too. Whirlpool sent out a repairman who replaced the element and PAINTED the damage on the top of the interior.For weeks, every time we turned on the oven, the house filled with smokey paint fumes. I have a chronic lung disease (sarcoidosis) so the paint fumes were a serious problem. We stopped using the oven. Weve hardly used the oven since that time because we have a nice, large countertop oven. I turned on the Whirlpool oven again in January of 2018. The top element burned out AGAIN after less than a dozen uses! I was 2-3 days past the purchase date and again Costco tried to advocate for us but Whirlpool refused to help in any way.My next door neighbor purchased this exact oven two months before we did and she has had the SAME problems (and worse!) with NO help from Whirlpool! I have HATED this oven even though we mostly use the cooktop. A $1300 oven should NOT burn up an element in less than a dozen uses! The cooktop is very difficult to clean, scratches and stains easily. The trim and panel also scratch very easily. Yes, I did purchase the Whirlpool cleaning kit and follow all directions carefully. My next door neighbor says dont bother trying the Whirlpool Aqualift cleaning feature because it DOESNT WORK! She hates this oven too. By the way, ALL of my appliances are new Whirlpool appliances! So far the dishwasher is doing ok but the microwave is 4 months old and the door is not closing completely, so it has to be adjusted often or it clicks rather than cooking. VERY DISAPPOINTED IN WHIRLPOOL!

The product has water and ice maker problems. The day we got the new refrigerator home, it did not make ice for one week. I called and had service come out. The line was not connected properly under the refrigerator. Water was flowing out of the front of the refrigerator. I called service again and they put in a new ice maker. The ice maker was still not working. I called service and another firm came out and said the new ice maker was bad. They put in another new icemaker. Now it is making ice but will not dispense it through the door like it is supposed to. I will call service again on Monday.

I purchased my new Whirlpool Cabrio Top Load washer to replace a Maytag that had finally given out in the summer of 2012. I wish I did more due diligence, but with a toddler and a newborn, I needed a washer asap. I severely regret my $800 purchase from Sears. It is now February 2013 and the machine basically only runs on two cycles - Casual and Normal. All the others stop in mid-cycle. Sometimes, the items are still dry or partially wet so I need to switch to another cycle to complete the wash. This is not good for Delicates or when I wash Whites, Heavy Duty or Bulky items which is one of the reasons I purchased the model. The cycle stops when the items are soaked with massive amounts of water. So I then have to turn it to the Drain cycle and start over. After a day of washing one load, I couldve done it the old-fashioned way in my utility basin sink and hung it out to dry ... I dont have the time for this. I am going to make a formal complaint to Whirlpool and to Sears. I cannot keep spending nearly $1,000 for items that break within a year. These companies should be ashamed of their lack of quality. I shouldve gone with the Electrolux and just dealt with the price tag - I wouldve been much happier.

My Whirlpool Cabro washer does not get clothes clean. When I contacted the manufacturer, I was told that it is water saving. What kind of water-saving is it if it does not clean my clothes. I would think cleaning clothes require water. If this feature renders the product ineffective, this product should not be in the market.

My wife and I purchased our Whirlpool Duet Model # WFW95HEDC 7/19/16. I put my first claim in on 12/19/16. We were sitting downstairs one night watching tv and all of a sudden a noise like the sound of a tractor trailer putting on its jake brake came roaring from upstairs. It was so loud that we both jumped. The machine would periodically vibrate violently while going thru its spin cycle. The frequency started to get closer and closer together. Whirlpool had a technician come to our home. They came out 3 times and said that nothing was wrong. They said that it was vibrating because it was on a pedestal and upstairs on a non solid floor. They also blamed the loose water hose on the noise. SERIOUSLY??? After the 3rd visit, and a week before the 4th visit our machine started to leak. We paid $1,079.00 for this washer and we were having to take our laundry to a laundromat to wash it. The technician came out the 4th time and replaced a cracked drum. Apparently it vibrated so badly that the drum cracked. So everything seemed ok, then WHALAH!!! We wash the clothes and go to move it to the dryer and it is dripping wet. Somehow after they replaced the drum the machine started to not spin the water from the clothes very well. Takes drying the clothes for 50min 2x to get them dry. I am now set to have the appliance company come out for a 5th time and still not corrected. Whats worse is that every time I contact Whirlpool they give me the same canned speech and want to set up another appointment with the appliance company. I am soon at the year mark with my manufacturers warranty and still having issues. I think Whirlpool keeps kicking the can down the road without making good on correcting the issue so they can get past the year mark and make us take it up with Home Depot on our extended service plan. I feel bad for everyone out there who got screwed by this company.

Worst appliance we have ever bought. Our last fridge (also stainless french door) we had for about 14 or 15 years and only the door bins cracked that we put gallon milk jugs in (dont do it - they are too heavy and get warm from the door opening). This fridge is a piece of junk. We were told it was stainless - rust spots started appearing the first year. The deli drawer lid broke within a month or two, but I didnt care about that so I just threw it away. The ice machine stopped working a little after the first year. Today however is what got me to write a review - I spent a couple of hours trying to duct tape and make wood supports to hold up the frame for the produce drawers - one of which is totally cracked when it fell from having the support break. While doing this I noticed there are hairline cracks on the front of all 4 of the shelves! Also, this one has a wire basket in the bottom instead of a full drawer - probably more supportive, but it means stuff constantly falls into the bottom of the fridge and it is extremely hard to get in there to clean.

Talked to tech & checked the manual for testing the thermocouple on my natural gas water heater. Everything checked out fine but pilot wouldnt stay lit. Tested thermal switch.... everything. They said replace the valve/thermostat. Still no dice. Turns out the thermocouple was cracked on the inside near the burner assembly & would give passing readings on the voltmeter 9 out of 10 times. If you have any pilot problems, replace the thermocouple first. Was only 10 bucks. I keep a spare now. Dont forget to vacuum any dust from the fine mesh screen on the very bottom. Fresh air supply.

I have a Whirlpool Cabrio washer. It was great for almost year. After that it has been nothing but trouble. The body of the washer has rust coming through the paint and large areas that is so rusted that the paint has chipped off completely. A washer is expected to deal with water and not rust through the body. I have a 10-year old Ford truck without a speck of rust. Dont they undercoat? The circuit board has had to be replaced because of rust. I have to take several Q-tips and go under the cover to remove all the rust if I dont it gets rust stains on my clothes, which is impossible to remove. The customer service is non existent. They have left me on the line for over 40 minutes. I hang on only because it would be another hour or so of my time to get someone to answer. I was without a washer for a month while waiting for parts. Why dont they have parts for their products? I had to slop my way too dirty laundry mats 3 times a week as I do 2 to 3 loads a day.My washer is downstairs and stops and gives me the unbalanced message even when its not, running up and down the stairs several times to complete one load. I also get the F51 message for no perceivable reason. The extra rinse button only works 1/2 the time. This was an expensive washer ($1,000.00) and I feel that I deserve my money back. They are knowingly making an inferior product.

We have put hundreds of dollars in service calls and parts on these items. I bought them because they were supposed to be good choices. NO way! I have replaced motherboard in washer, belt and sensor in dryer, the washer has had mold in it since week one. Ive tried to clean it but just keep coming back. All my clothes smell like mold and I already have lung problems! Cant afford to buy new right now. But last month my dryer started making terrible banging noise and so repairman says I need another part! I bought the part more money! Just to have it quit again! Now the barrel split! I dont think I should have to pay the money I did for this set and surely shouldnt of had to replace so many things that went wrong or put up with the sewer smell from the washer!

I have had my refrigerator for eight years. Only had one prior repair which cost me $85. I have had a wonderful experience with this particular product. I am pleased with the liability and hope to replace with an equal or better appliance.

We purchased a mobile home in 2008 that had all Whirlpool appliances. The microwave quit working 2 times before the warranty was expired. They paid to have it fixed. After the warranty expired it quit working again when it was about 3 years old. I called the repairman and he said it might be the most expensive part in it, so it would probably be cheaper to buy another one. I had to buy the same model because it was a built in microwave and I couldnt find another one to fit. It quit working about 2 months before it was 2 years old. I called the company and they were polite but said they couldnt do anything since it was out of warranty. I have been through two of these same models in 5 years. It ought to be against the law to sell such junk.

Water heater purchased in 2011 and is already broken. Called the hotline and they were rude. Told me I need a $199 part. I read all the reviews and it seems that Whirlpool has made a bad name for themselves with the water heaters. They were not willing to work with me.

I bought the top-of-the-line Whirlpool top-loading washer and havent regretted it for a minute. This machine washes everything from the most delicate to the most bulky and heavy and does an excellent job of it. It saves about 1/3 of the water my rotary agitator washer used. What more could I ask from a washer. Incidentally, also purchased the largest front-loading electric dryer Whirlpool makes and never have to hold a load of wash until the dryer finishes the last load...a real time-saver.

I bought this Whirlpool Duet Sport washer and dryer, and I have had to constantly bleach out because our laundry smells like mold. I found out that Tide sells a special cleanser for this washer so I have been using that for the past two years. It did not really help. Well, today I accidentally put laundry soap in the wrong dispenser, so I took the dispenser out and was horrified to find mold that was all in the back where the fluid is dispensed, I mean way back in there. I have been suffering with sinus problems, and swelling in my eyes and face. I even went to the doctor, but no one has figured out why. I now know it is the mold from my washer making me sick. Well, my son and daughter-in-law were staying with me, and commented on how bad it was when they used my towels. I am stuck with a $1,600 washer and dryer that is making my family sick.

When you first get the washer it looks like it can get the job done. Its the brand name and you trust to get the best clean from the washer. After a couple of months I dont see them clean. It washes with a couple of shakes back and forth and when my clothes are ready they seem like they were dipped in water. Not clean. It has all these fancy buttons for all different types of cycles and loads and they all seem to wash the same. As a mother of 3 kids I want my kids to put on CLEAN clothes. Not clothes that look like they have just been dipped in the water with detergent. I feel a good on cleaning board and my hands do a lot more than these high priced washers.

I bought a Whirlpool range. After 15 months, I hadnt even paid it off yet the oven stopped working properly and then again after two years. These ranges are junk. Dont buy Whirlpool! They dont stand by the product either.

I bought a 40-gallon hot water heater in November 2007. First problem I had with it was in 2009 when the pilot wouldnt stay lit. They sent me a requisition number to take to Lowe’s to pick up the part (igniter) and gave me a service number to give to the plumber to fix it. Plumber actually told me these heaters were junk and this wasnt the last problem Id have. Last Sunday (January 2012)--here we go again. Pilot went out and wont stay lit. Whirlpool is telling me its because I have a draft. Yeppers, that must be it because after they had me (arthritic 53-year old) and my disabled husband performing circus acts trying to relight it, then it was the filter on the bottom, then it was a draft. Last time I tried to light, which really someone as blind and disabled as me shouldnt be doing anyway, I about blew up. I hate getting ** by big corps. I filed a complaint with state Attorney General. If that doesnt work, hell, I think Ill take both Whirlpool and Lowe’s to small claims court. What do I have to lose? $35? Their fancy-schmancy lawyers will probably charge them a couple grand for their efforts. Im sick and tired of getting the short end of the stick. Since when is a hot water tank supposed to last a mere 4 years? Oh, by the way, Whirlpool says it’s all on me now--well see about that. First of all, both of these chumps just lost a customer and I Facebooked by friends about this pleasant experience plus included a link to this page. Consequences are all mine, I guess. Its pretty swell bathing in a sink full of water that you heated on the stove. I dont have any money because Im too busy giving it all to big insurance and big pharma right now. What a country!

Purchased the Whirlpool electric range with aqua lift technology. Have the stove for 21/2 yrs and have tried contacting Whirlpool on numerous occasions. Email and telephone. Only response I get from them, is that Im doing something wrong. How can you do anything wrong? Add water, push button. I finally put in a call to World Headquarters but had to leave message and nobody has returned call. I finally called a whirlpool serviceman and he told me the Aqua lift is not a true self cleaning oven. The temperatures dont get hot enough. It was meant to just loosen the dirt on the bottom and then you have to scrub. The button you press to start the process on the stove states SELF CLEANING. I believe they have mislead the public with their advertising. Im thinking about any options I may have.

I replaced my 12 year old Whirlpool double ovens with the current Whirlpool double ovens. The new 30 built in double ovens have been re-designed to vent the heat below the lower oven. The ovens come with a part that pushes the heat down instead of straight out. My built in ovens have a cabinet drawer below and after using the ovens just 4 times over the holidays I noticed the heat is damaging the finish. According to Whirlpools service center I should have checked on that before buying/installing. They told me to stop using my ovens, that this is a fire hazard, but they are not responsible. They do not have a solution to this problem. This is a poor design on their part. There is a disclaimer in their installation booklet that came packed with the ovens that the installer gave me. It says the cabinets need to be able to withstand the heat of the ovens. The cabinets can handle the heat of the ovens, just not the hot air venting directly onto the cabinets below the oven. Where does one find cabinets that can withstand 400 degree heat being pushed directly onto them? As a customer I did not have that information until after the ovens were installed and it was too late to purchase another brand.

I have had my Whirlpool stove for over 30 years and use it daily. Still a great stove. I would not trade this stove or any of the new types. I just need to get the self cleaner repaired. The only problem I have is finding parts to fit this older stove.

Cabrio Whirlpool washer - I hate this washer. Had it for about 3 years now and it will not spin out and does not give a code. Called a service tech out and they cannot find anything wrong with it. The water goes out but will not spin. It sits on 20 minutes and does nothing. Will not buy another Whirlpool washer. Wanted a good washer and got a piece of junk. Will not recommend it to anyone else. Think Im going back to the old style.

I like the experience of the microwave. Especially because it’s mounted in the wall and easily accessible. User-friendly, easy to use, and pretty self-explanatory. It’s very easy to clean which is something my wife really loves knowing we both are working professionals.

Always buy an extended warranty if you are going to buy a washing machine. Mine cost $129.00 extra and it is not through Whirlpool. Three control panels and two tub bearings later, the extended warranty insurance carrier gave us our money back to buy another machine. My wife loves the operation of the Cabrio, so we bought a WTW8200YW today, in the false hope that it will work much better. We have an extra washing machine in the garage for the three week period before repairs. The serviceman has to come look to verify the problem, then come back when the part arrives.

I am experiencing problems with keeping my pilot lit too. I checked the screen and this is not the issue. I have just returned from Lowes where I purchased the water heater and they informed me Whirlpool supplied kits for this issue and it was widespread. They mentioned a class action and went on to tell me they and all surrounding Lowes stores are out of the free kit and arent expecting anymore. Am I to feel lucky my water heater water didnt fail sooner only to feel unlucky all of the free repair kits are now gone? Lowes provided me with the Whirlpool phone number for help and they have just informed me it will cost me $35.44 plus shipping. I now see how widespread this problem is. This isnt right. I am very disappointed in the handling of this known problem! What is my next course of action?

My WTW4900BWO failed after about 2 1/2 years. Out of warranty, but I called Whirlpool Customer Service and was initially delighted that they offered to sell me a repair warranty that would cover the repair of my broken transmission. Was told that through AIG Insurance, I would have a repairman at the house tomorrow to repair the washer. A few hours later, their contracted local repair service called to try to push appointment back a day but I refused since I was told my washer would be repaired tomorrow. They showed up the next day in a old faded van, diagnosed the problem and then told me they would have to get authorization and come back in 3-4 days. A couple of days later I received a voice mail from AIG saying that since the cost of repair was more than the cost of the premium, they were canceling my policy & would refund my money. So a week later I still had a broken machine and no solution other than buying a new one or paying the cost of a new one to repair. Moral of the story: Whirlpool builds unreliable washing machines (and water softeners) and their customer service will promise you a repair that may not happen. Dont buy Whirlpool, but if you feel compelled, you better buy an extended warranty and cross your fingers. That said, we always had purchased GE appliances and never had a problem.

17 month old Whirlpool duet washer door lock broke. ($300) repair! Had given my old (13 years) set to daughter when I moved. That set has never had a repair or problem! Why do they keep making things with more bells and whistles we dont need and so cheaply made? Frustrated, annoyed and becoming cynical in middle age.

My Whirlpool water heater had to be replaced. I got a new water heater, and filed a complaint against Chris from your company. Talked to Chris, and he requested for paperwork on the old warranty. I tried to send it through fax number 1 800 999 9210, but got no response. Chris, please reply with the fax number so I can send the info you requested

So I had a problem with the water heater after 2 years and had the sensor fix by my heating people. Now the water heater is 3 years old and started leaking from the top of the water heater. Called my heating people and they fix the pipe and coupling on top but he told me the water was still bubbling up at the top. He told me it could stop and 70% it would be ok. Went to check on it and it continues to leak so I called Whirlpool because it was still under warranty. They are the most horrible people to deal with. First of all I told the guy it was leaking from the top but he asked me if it was leaking out of the side pipe. Didnt know what he was talking about and he kept sighing on the phone. If I knew about water heaters I wouldnt be calling them. After all the questions it came down to it was leaking where I told him at the top. He gave me a number and told me to take the water heater back to Lowes and get a new one and then call them and they would move the warranty over to the new heater. Really???? We are not talking about clothes you want to bring back to a store. Asked him how I should do this and he told me to call a heating contractor. So does he think that the heating contractor and going to run the water heater back for a new one??? In the end I just called my heating people and they are going to send somebody out to install a new heater. So much for Whirlpools warranty. If this is under warranty and it is exclusive to Lowes then they should be having Lowes bring a new one and install it.

We purchased the Whirlpool Gold Gas Range (model #GW399LXUQ06) in November 2011. Last week, I noticed the porcelain enamel finish on the stove top grates has fallen off in pieces. I contacted Whirlpool today, February 14, 2012, about this issue and they advised me it is a cosmetic problem which is not covered under the warranty. They advised me that it would cost over $100 per grate to replace. We have had this stove for less than three months and I feel these grates are defective and Whirlpool should be responsible for replacing them. I am very dissatisfied with this stove.

Wish there was a no stars. This is the second refrigerator in 3 yrs or less. Had first one for less than 8 months before it stopped working. Needed to be replaced and now second one made it a little over a year and now just stopped working. Washers were also garbage and I’ve been slowly buying all new appliances with other brands. I’ll never buy a single Whirlpool product ever again.

I bought the most deluxe and expensive washer and dryer I have ever owned. It is a Whirlpool Cabrio. The clothes come out of the washer dry, and all tangled up. I bought it new from Sears on July 2009. Now only two years old, and the washer sounds like a jet plane. I paid a repairman $90.00 only to be told this is common in this machine. The repair is expensive, and I would be better off buying a new one! I owned a cheap, little GE washer, which cost me $300; ten years, and never had a problem. Now my dream machine turned out to be a piece of crap. I will never buy a Whirlpool again!

I have a 5yr warranty. Im 3yrs in on the 3rd repair. Horrible. This time they cant get the part and Ive been dealing with them for 5 almost 6 months. I spend countless hours on hold trying to get a real person... When I do they send me to someone else where the queue starts over. I paid $400 extra to just have them replace the fridge and its been over a month and they cant even get a new one delivered. Just refund my money! This is beyond the pale. Dale, Sunrise Beach Mo.

After reading all reviews online on the lid of the Whirlpool Cabrio Washer, it upsets me that there has not been a recall on this. Our lid has snapped & has to be held down until the lock light comes on. Often times during the cycle it must sense the lid is broken & thinks it is not locked & sets the load off line. I have to pause the load & then reset the load & hold the lid down tight until it restarts.

Purchased a Whirpool fridge 1 1/12 - after Sandy, used for about 1 month. Now ready to move home and was told ice maker bad?? Thank god we purchased warranty! I want to know why ice maker is bad regardless covered?

Love the size. We got the 28 cu ft with the drawer. I love the drawer for cold drinks and lunch meat, cheese, etc. Unlike previous refrigerators I never seem to run out of room. The bottom freezer has 2 drawers and is easy to organize.

Purchased this Upright freezer model 160NZTQ02 approximately 2 years ago. Freezer had problems maintaining temperature from the beginning. Noticed it freezing up at air vents in back of interior. Unplugged, removed contents, and let defrost by ambient temperature (approximately 4 hours). After using this method for first three defrost periods (approximately two weeks apart) I began defrosted with hair dryer, then moved on to heat gun. Bottom line is this junk wont hold temperature and freezes up every few days to a week. No more Whirpool for me.

Brand new Whirlpool dishwasher from PC Richards. Model #WDT710PAYB2. Dont buy one of these! In the store, I was turned off by the panel being on top of the door and not visible when the door is closed. I dont understand why anyone would not want to see the cycles and operation but my husband insisted that was a good thing so I agreed to purchase. Well, its horrible! I pressed the panel buttons the first time I tried to use it, and the panel switch is erratic and all over the place. For example, if I press Normal, the Heavy cycle button light goes on. When I hit start, all the button lights shut off. I finally get all the lights to stay on and hit start (after about 10 tries) and when I shut the door, the start button blinks and beeps! The dishwasher does not start. After many attempts, I got it to run, miraculously, for about 10 minutes. It emptied the detergent dispenser and left everything inside wet and slimy. Nice. I cant believe Whirlpool would sell such an inferior product. I have always been a loyal Whirlpool customer, but after this experience, I think its time to switch appliance brands. Now I have to be inconvenienced without a dishwasher after spending over $500 and wait for a repairman. Thanks, Whirlpool!

This washer was purchased on 12/21/2007. It was in a vacation home that was rarely occupied, therefore washer not used much. On 7/23/2008 the cycle switch was replaced. On 7/20/09 the same problem occurred. The washer may have been used 5 times during the year. The handle and rim also needed to be replaced. On 8/31/09 the switch and handle were replaced again. On 2/5/13 the door latch was BROKEN AGAIN. Now on 7/10/15 the door latch, start switch and cycle switch are broken again... DO not buy WHIRLPOOL products.

I like the Whirlpool oven ranges because it is easy to operate, easy to clean and like the features and functions. I have had no issues with the stove and I have had it for four years already. So far still working good.

Purchased a Whirlpool Cabrio WTW7340XW2 washer approx 2 years ago. The machine runs so loud on the spin cycle you cant have a phone conversation or hear the TV over it and is leaking grease from the bottom. My mistake to not purchase the extended warranty but you would think a machine would last more than 2 years. I contacted Whirlpool online and by mail and they do not stand behind their product. I did contact a local repair shop and by our phone conversation was told it would be approx 300-350 to fix it and Im not putting that kind of money into a repair. Just want to let consumers know this machine is junk and spend your money on quality appliances, not Whirljunkpool.

Cabrio fabric washer and dryer sucks. I gave almost $500 for a piece of **. Doesnt get the clothes clean. Hell most of them dont even get wet. Its junk. Wouldnt have another one. Lowes junk and the dryer aint know better. Its always flashing check lint even when its clean and you have to ** with it just to get it to start.

Ordered water filters for refrigerator. They did not arrive. Tracking # came back not found. Waited on phone for an hour. Talked to representative. She could not help me. Transferred me to another department. Been holding for an hour. Still no help. If this is what Whirlpool calls good service, they are completely lacking. I will not order another Whirlpool product.

I cant believe the list of people here with poor quality of their washing Machine. My first problem was covered under warranty. I have paid for two service visits from A&E and now every 5 minutes get the LF error. My fabric softener does not drain into load either. My only option is repair again and I got a sorry from Whirlpool. I think Im going to look for an old fashion cheap machine as it cant be of worse quality than this Cabrio wtw6400sw1.

I have always used Whirlpool products and have grown up with them. From washing machines to dishwashers. Not only is it made in the USA but its reliable. The only problem is space and it can do with more freezer space. Other than that its a great refrigerator.

I purchased a Whirlpool dishwasher from Home Depot on 2/5/2015. It was delivered damaged on 2/9/2015. Home Depot refused to take it back and Whirlpool sent a tech out to see the damage. I told them I did not want a refurbished dishwasher that I paid almost $1000 for. Whirlpool advised Home Depot that the machine can be repaired. Once again I told both whirlpool and Home Depot that I did not want this dishwasher and to pick it up. Home Depot stated that there would be a 15 percent restocking fee along with a $65 to pick up the washer. Why should we have to pay anything? I am so disgusted for the treatment I received.

Self-cleaning oven system DOESNT WORK AT ALL! The company rep I talked with said the system only works on lightly soiled oven and doesnt clean at all on the oven top or sides. When I explained that my oven was less than lightly soiled (I rarely use it) and that I had run the cleaning cycle twice and none of the soil was affected. Apparently the company is aware of this problem and I believe customers should be made aware of it BEFORE purchasing. I was told there was nothing they could do because my appliance is out of warranty. I asked if they had received other complaints and was told they had. I am not surprised.

I Wish I had reviewed this refrigerator sooner. I bought a Whirlpool side by side refrigerator with ice and water dispenser in the door in 2016. Problem #1: Water leaks from the water dispenser and dribbles down the front of the door. I am as vigilant as I can be about wiping up the spills, but over time it has left a water stain. Stainless steel is not stainless! Problem #2: The freezer is too narrow. Too many frozen items that come packaged in boxes have to be wedged into it or stood on end. Problem #3: Ice cubes sometimes randomly drop out of the dispenser and melt on my hardwood floor. Problem #4: Even though the water is filtered, mineral deposits have built upon the well that collects the drips and I have yet to find any product that cleans it. It looks horrible and filthy. If Id had any idea how awful this appliance would look after just a couple of years, I would have been in contact with Whirlpool immediately.

Like hundreds of others, my Whirlpool double wall ovens circuit board stopped working after 5-7 years. Accubake s-xt3704215 m-rbd275prb00 Whirlpool double oven. If it is happening to all these people, the protectors of the US consumer need to do just that!

Right at 18 months ago, we bought the Whirlpool Cabrio Top Load washer. The last washer we had was the bottom of the barrel Whirlpool model and it lasted 8 years. So, I had no problem purchasing the brand. But now, our washer wont go through the cycles and we hare having lid lock issues. The repair guy said the lid lock was fine which I thought was good news because he said it would be $300 to replace including his service call. Now, it looks like our choice is a $350 motherboard, or a new washer. Whats wrong with this picture? I can go to Lowes right now and buy a used one (exactly the same for $399), pay $350 to repair my two-year-old $750 washer, or buy a different washer? Its hard to believe that a $750 washer is only good for 2 years.

We purchased Whirlpool Oasis. The top loader washer and dryer 5 years ago from Sears. Both are scrap now. Paid high end money for these. Tub was changed on washer 2 years after purchased. Now looks like electrical control panel is gone. Oh well, Sears not really the problem because Whirlpool holds the monopoly on appliances. They are made to fail. Watch marketplace or W5 shows the tech men tell the story... You want to get screwed, buy a whirlpool. Hell I did.

I bought my Whirlpool induction stove several years ago. We normally use a toaster oven for baking as we are only 2 in our home. Last year I decided to cook a large turkey for the family. I threw the turkey into the oven and started cooking it. After an hour or so I decided to start cooking the potatoes etc on the stovetop portion. My potatoes started cooking and my element shut down. I did everything I could to get it going but finally resorted to the manual to see if there was a suggestion. The suggestion was that the oven had heated the burners too high and that I had to shut off the burners and wait for 5 minutes and try again to use them. The oven was only cooking at 300F. I waited 15 mins to get it running again. The stovetop went out once again and I had to stop cooking. Conversely Ive had the same issue with the oven. Ive been cooking in the oven and have had it shut down as a way to address the stovetop being too hot. How am I suppose to cook on this unit with any kind of confidence? I did an online chat with a rep today and they suggested getting a technician over to the house. I was told I could pay $129 to have them look at it. This is obviously a design flaw that I was never told about prior to my purchase and would never have bought had I known. Shame on Whirlpool!

We bought a new house and the choice given to us was Whirlpool. After the first year in the house we had a $300 repair. The control panel inside the fridge went. Pretty poor performance.

In addition to my refrigerator dying after 3 years, my microwave died after 4.

I see that I am not the only one with the same pilot problem. I just purchased this new model that came out last summer. I bought my new water heater in September and just this past weekend, it messed up. I have not had it for 8 months. Whirlpool sent out a technician yesterday and he said the assembly is not good and the pilot would not light. Well they sent me a replacement part and they are coming out today to install it. The funny thing was that the technician said, Oh, these are hard to work with. We have a lot of problems with these models and they just came out last summer. Its the on that has the little box and you push the pilot button in and hold it until the red light comes on. Anyway, he said he didnt carry parts for that one, only the old ones which last longer. The ones that have the black round circle that looks like a thermostat. I said, Really? Well the reason I bought this water heater is because my last one that I bought 2 years ago kept having the same issue. Whirlpool sent me the assembly with the pilot and all 3 times and would never replace it. I got tired of it always messing up so after having it for 2 years, we just dumped it and went and bought this new model. Here we are 8 months since we bought it and the same thing is happening. I am so furious. I am pissed off that they dont recall these if they are defective. Why do they keep selling them if people have problems? My cousin called me a couple of months ago and asked if my husband could check her water heater and its the same type I had and it was doing the same thing. I will never buy another Whirlpool water heater again.

The water dispenser tube cracked and split off near the dispensing end, making the dispenser unusable. Not a consumer repair, by any means. Refrigerator is only a year old. I had a similar parts quality issue with a Whirlpool dishwasher. I will never purchase another Whirlpool appliance, and will advise all to avoid as well.

My oven was 11 months old when I tried to use the self-clean cycle for the first time. 2 hours into the 4 hour cycle, the oven completely shut down, door locked shut and no lights on the control panel. The repair tech came out on a warranty repair call (no charge), explained that Whirlpool does not use a thermal protector rated for a self-cleaning oven and that it blows every time. He then proceeded to replace it with the same thing because he is only allowed to put in the recommended part, which is not rated for the high temp cleaning cycle. So the oven is usable, but not the self-clean. Since I am at the end of the 1 yr warranty period, even if I were able to get Whirlpool to replace the oven (ha!) there would be no warranty because I only get the original time limit. So if I had a new oven and it blew out, it would not be under warranty for fix/replace. The repair tech said this is a COMMON problem with Whirlpool self-clean.

Before last Thanksgiving (2020) had installers set up this 3 door bottom freezer 2.4K new Whirlpool Fridge. It immediately froze almost half of the goods (big holiday foods). Whirlpool Tech showed up 3 times of 4 appts and could not repair. He said should work and now we froze Christmas Holiday foods. Different company of Whirlpool Tech was here was here twice, second time he ordered 4 parts and as of March 12, 2020, we can only use about half of our 24.7 cu ft fridge. For almost 6 months we have bins in our garage instead of the fridge...now our garage is too warm for bins of food. Whirlpool refuses to confirm this $24K fridge a lemon. We DESERVE more!

We bought this on sale but we're really glad we did. I was surprised how quiet it was while cleaning the dishes, insulation I guess makes it quiet. The wife also uses Cascade liquid dishwashing soap which seems to get the dishes really clean. Rinsing before we stick them in probably doesn't hurt, but overall, we are very pleased. The dishwasher has an adjustable rack which we've only used a few times and the start is easy enough for me to even figure out, sorry guys, but yes I do the dishes sometimes. Hope this helps. Good luck. Oh its model # is WDT730PAHVO.

I was so excited for this stove top and oven - Whirlpool Gold AccuBake (especially at the price we paid for it!). Weve owned it for 13 years now, and in that 13 years, we have had to have the computer replaced 6 times now. The latest replacement being last week (Friday). The oven is still making clicking noises like the igniter wants to start and it is frustrating and annoying. It will do this for a 3-hour stretch numerous times throughout the day and night. Had a repairman here last week and he replaced the computer AGAIN! But the igniter clicking noise continues.

Worst purchase I have ever made. When I purchased this Cabrio washer in 2015, I didnt find bad reviews but how I wish I had. This washer does not clean clothes well. It has caused holes in clothing and towels. Often all the load wont even be damp even if using the deep water feature. The wash loads rarely fill more than couple of inches. Clothes come out twisted and terribly wrinkled. Sheets and blankets will be half dry and unclean. TERRIBLE APPLIANCE. WOULD NOT RECOMMEND. Now I am stuck with a high priced washer I wouldnt even feel good about giving away. WONT FILL. RUINS CLOTHES. TANGLES LOADS. DOESNT CLEAN. DOESNT RINSE PROPERLY. DO NOT BUY!

The washing machine started leaking and making a noise like a freight train 6 months after purchasing it. We complained in February 2011, but the parts were not available until March 31, 2011. The same problem occurred in September 2011, and we are still waiting for the parts until October 18, 2011. In the mean time, I have been spending hundreds of dollars doing wash at the laundromat.

This washer was expensive, platinum line. Clothes never smelled fresh and clean like they should. There is not enough water to cover and clean. After 4 years it started smelling dank and unpleasant even after cleaning cycle is run. Now I discover it has been leaking for quite a while. It will be 6 years old in July. The top wont stay up. This happened months ago. The part alone is 250.00 according to several sites. I just prop it up. Very displeased with this poorly constructed, expensive rip off!

We bought our Cabrio set 2 yrs ago. They have worked fine, until about 4 weeks ago when we begun getting what looks like bleach stains on our dark and colored clothes. I blamed my wife for using bleach or splashing it accidentally. So today it happened again, and no bleach was used or even open near the machine. This was the third load today and the first one was towels, no damage, 2nd load whites and light underwear with some spotting, third load pair of pants and pair of shorts ruined. What is happening?

My Whirlpool refrigerator model #ED5FHEXV001, serial #HR0248 - I have spoken to a couple of reps on the phone. I am very dissatisfied because it was like one rep I spoke with on the telephone advised me to buy an extended warranty and at that time, the company would consider alternative ways to deal with this complaint and perhaps replace the refrigerator. I did not want to pay an additional $100 for a warranty, unless the company would guarantee me a solution, preferably my money back. I did not really believe the warranty would help me after the warranty was expired. I would still have the same problem and I feel that in the event after the extra warranty expired, the company would tell me I should have kept the coils clean, which is my complaint. There is no way to keep the coils clean. I guess blowing out the residue, then all that residue material would end up all in my house. Also, very important, there have been 3-4 technicians to my house the first year. I was told various things to do, such as adjust the refrigerator to a lower setting and freezer to a little higher setting. One tech actually replaced a part? The second tech said he would clean the coils. The last tech told me the problem was my coils had to stay clean. My question is, how the heck is that possible with the coils on the bottom of the fridge and susceptible to a lot of dust and dirt, unless I move my fridge everyday? Most people do not expect to have to clean under the fridge each day and the coils would still be dirty anyway. It is very dumb that the coils are not on the back of the fridge. With the fridge coils on the back, I have never experienced this problem. Please advise what my next step would be. Thank you.

I just contacted Whirlpool Co. by online chat concerning the workmanship of their microwave that is less than two years old. The interior top has begun to bubble and peel as well as rusting. This is the 2nd Whirlpool microwave where I am experiencing bubble and peeling paint as well as rusting. Whirlpool informed that the manufactory was 1 year warranty and to contact a technician at my expense. There is a real health issue here and I hope consumer complaints about this company is being monitored by someone who can help all of those with concerns.

Error f1e2 error. Washer less than 2 years old.

We purchased Whirlpool Gold Accubake, double ovens (gas) in 2005. Since then, we have experienced identical failures (8 to date) during the self-cleaning cycle in which the high temperature burns out the thermal fuse of the ovens. This requires two Sears technicians to repair the unit (it requires two technicians to pull the oven out as the fuse location is in the back of the unit) and leaves us without use of both ovens for approximately 2 weeks (scheduling parts delivery and technicians through Sears home repair is not an expedient process).After checking other consumer product websites, it has become clear to me that there is a known design defect with these ovens in which the thermal fuse is not adequately insulated from the high temperatures during self clean; it therefore trips and burns out during the self-clean cycle. While not having access to ovens for about two weeks/year on average may sound acceptable to Sears, the reality is that the problem has escalated in frequency since purchase. In 2013, we are going on our third repair of the same problem (that makes 6 weeks of non-usable oven time in one year) and Sears will not consider replacing the unit, despite: 1) our obvious dissatisfaction with a lemon unit, 2) a well documented history of the defect with this particular Whirlpool oven and 3) an ongoing and escalating repair cost to Sears (it is under their extended warranty so the repair cost is on them although we did pay for this service up front on our appliances).I would stay away from not only Whirlpool appliances but also Sears as there doesnt seem to be any regard for the customer experience and taking care of a product problem (the right way) with a known defect. Sears has an opportunity to make this problem go away quite easily and retain a customer - fix the problem permanently or just replace the defective unit. Unfortunately, my experience to date with Sears standing behind the products they sell provides me with little confidence that either will happen.

I purchased my Whirlpool Duet in 2007. I have since paid more than what the washer costs in repairs. Now, the metal that braces the basket has corroded and fallen apart. Ive read that this has happened to many people and since then the company has changed the part. However, they are unwilling to send a new part to me. I will never buy a whirlpool appliance again.

I am writing this review because I have been working with Whirlpool regarding our Cabrio washer for the last 9 months. Ever since we got this washer, it leaves a stain on our clothes, especially dark cottons. It looks like a grease stain. The machine is still under warranty (though we did purchase the 5 year warranty), and we have had the technicians out 3 times to figure out the problem and fix it. They even had another company come out to do a second opinion. They are stating that the machine is functioning and therefore there is nothing they can do for me. All of the tests the technicians do come out normal, and therefore the machine is functioning, never mind that it still leaves stains on many of our clothes on a regular basis.I spoke with someone yesterday who was unable to help, stating there was nothing they could do. So, I asked for her superior, he stated that it is functioning properly, and that I should take the advice of one of the technicians who suggested I mix the soap with water beforehand because he is pretty certain it is soap residue (though he admitted I dont use too much when I showed him how much I use). Never mind the fact that if I have to do something more than the directions state, it isnt working properly, we have already done this and it doesnt stop the residue from happening. He still just continued to say that is what the technician said would help so that is what Im supposed to do.So, I asked for his manager. I am currently waiting for them to call me back. I am hoping they will do the right thing and just exchange it for a different washing machine, one that will work. I dont care what kind, whether its brand new or not, I just want a washing machine that actually cleans my clothes instead of leaving a residue on them.We do agree with the technician that said it was soap residue. We have a picture of a pile of dry soap in the dispenser (which the first technician told me to switch to) after the washer had finished its cycle. The washer doesnt have enough water mix with the soap to keep it from leaving a residue on the clothes. And, the residue doesnt just wash off if I wash it again (which shouldnt need to be done with a washer that is less than a year old anyway). It is a permanent stain unless we scrub it with Lestoil - an oil remover. But, that takes time and it needs to be washed twice to get the Lestoil scent out, which then gives it the chance to get new stains from the washer! Its an endless cycle. Needless to say, I have NOT been impressed with this washer.

I bought my refrigerator side by side on April 16th 2010 at Lowes. Not even six months, the liner inside started to get cracked. I called and they send serviceman. He just put a tape to cover the cracks. I called Whirpool corp and they told me its cosmetics issue so our warranty does not cover cosmetic problem for as long it works and cools. I will never purchase Whirpool brands. Lesson learned.

I have a Whirlpool french door unit with ice & water through the freezer door. I recently noticed rust in the ice. When the extended service plans tech came to see it he told me that the ice bucket would have to be ordered. Almost a month later, I called him and was told that rust isnt covered. I understand that surface or cosmetic rust shouldnt be covered, but rust in a place where it can be ingested is different. Anyway, I called Whirlpool directly and a very nice phone rep agreed with me and asked her supervisor. Needless to say, I just sent Whirlpool a letter stating that I would pursue this through legal channels if I dont get satisfaction.

I am very reluctant with online product feedbacks. But here is one story that needs to be told. I purchased a Whirlpool 3D Split AC 2 years back (and hence the product is out of warranty). The product quality is so bad (and unreliable) that within 2 years the coils in the Outdoor Unit have started to leak. When I requested for service visit the technician (so called) came over and did a wet service and took the fee (without an invoice). And assured that the AC would start to work fine. Within a week we realized that the AC is not cooling enough. Again a service visit was called and this time the technician (supposedly) diagnosed the above problem. The repair cost told to me is to the tune of Rs 10,000/- for a product cost of Rs 36,000/- (or so) bought just 2 years back. Does anyone in Whirlpool understand what QUALITY means??? Does anyone understand VALUE FOR MONEY... This aside I have a 2 Tonne Whirlpool AC, 350 l Whirlpool DD refrigerator and a Washing Machine... I think its time for Move over WHIRLPOOL and HELLO MITSUBISHI, BOSCH, HITACHI... End of a great consumer brand...

Whirlpool Gold french door refrigerator. Ice maker stopped working and freezer stopped freezing. 888 complaints on these and they deny a problem.

Changing the filter is difficult & expensive. And where has the old fashioned service gone. New refrigerator and would have to pay for service. This happened when I bought the refrigerator a couple years ago. I do not think this should be the standard for a new refrigerator.

I purchased a Whirlpool Cabrio set 3 years ago based on their brand reputation and consumer reports. It has been a terrible experience since the moment the warranty expired. First, about 1 month after warranty expired, I had to replace the main electrical board. Then about 3 weeks ago, the drain pump failed. I purchased the $110 pump and installed it myself. Now this week, the spin cycle sounded like a jet engine. I took it apart to find that the bearings were shot on the drive shaft. I figured, well it is just a wear item, understandable right? So I went to order parts and got told that I have to order the whole outer tub for $250 with shipping! For some bearings! I called Whirlpool directly and was given no explanation other than Call some parts distributors. They may be able to help you get the bearing separate, but we dont do that and there is nothing that we can do. Amazing. I equate that to having a faulty brake on my car and being told that I have to replace the whole axle!Fortunately, the washer never really did a great job. It was loud and tore clothes up, so the decision to part ways was not too difficult. I have the list of brands they make and will be sure to never buy another. Im selling this one for parts. Im sure there are others out there that will need a pump and control board soon!

This is the worst washer ever. I purchased this washer (Whirlpool Cabrio Washer Top load) brand new in the box thinking it was a great price and a good deal. Worst choice ever. I have been so disappointed in this product. It is very noisy which is something I have learned to live with. It doesnt even get simple stains out. I have tried every load combination and change detergents and stain remover a couple of times. Most time I have to soak stains again and again and then wash several times and most times it simply doesnt clean clothes. It leaves detergent residue on dark clothes so of course I end up washing those again as well. The towels and sheets turn into mushrooms in the bottom of washer.

We have a 2008 Whirlpool gas range that has worked reasonably well but lately more and more of the electronic push switches on the keypad have stopped functioning. So now I cant set an oven temperature as only a few of the 10 number switches still work. I talked to an appliance repair guy who said that the typical electronic keypads are notorious for burning out after 3-5 years because of heat transfer from the oven. So now Im stuck with an oven that is virtually unusable and a $400-500 cost to replace the keypad control. Is it worth replacing? Can the faulty control buttons be somehow fixed? Shouldnt Whirlpool acknowledge the faulty design and provide a free (and hopefully better) keypad? There must be thousands of people out there with similar circumstances. What about a class action suit? Any advice/opinions out there?

The refrigerator I have is 3 years old and the service tech will be at my house on Thursday to put the third comp. in it. I have lost all my food 2 times. Times are hard. I would like to talk to a person not a machine.

16 months after purchase, the machine starts displaying F71 codes, 6 weeks later F70. After calling Whirlpool customer service number on the User Manual, we were told that the washer was out of warranty and there was nothing that Whirlpool was going to do for us. I have a reasonable expectation that a brand new $800 washing machine will operate for many, many, trouble free years, but finding an electronic failure that has been estimated at $400 to repair, 16 months after purchase, is simply and obviously unacceptable. This is clearly a defect in design and/or manufacturing.

Just bought a Whirlpool stove (WFE540H0ES) from Home Depot. Oven gave off so much heat around the handle that I burned myself opening the door... Tech came out said it wasnt supposed to do that. Called into Whirlpool to get clearance for a replacement and corporate says no to the replacement because that is normal. Thats BS! If that is normal DONT BUY A WHIRLPOOL!! BTW... They are owned by Maytag.

The Whirlpool refrigerator I ordered from Home Depot came to my house dented. I then had to get Maytag/Whirpool to send me the same model refrigerator which they then subsequently forgot to include the ice maker with the refrigerator. It has been nothing short of an act of Congress to get in touch with someone from their Customer Service department for them to send the ice maker that they forgot to include. Ive had to call them at least 15 times to get them to resend the missing ice maker. Absolute nightmare. 10/10 will avoid buying Whirlpool in the future.

I am thoroughly disgusted with Whirlpool. How dare they sell the garbage that they put out? I didnt buy the extended warranty when I bought my Whirlpool washer and dryer. Why should I when I put out all the money that I did? I havent had the product three years and had to have a repairman out to fix. And then the parts are so expensive, and they are cheap Chinese junk. I dont understand how something with a name like Whirlpool can put out such a disappointing product. Never again will I purchase your product. And I certainly will spread the word. Greed comes to mind for me. I see you have contributed much money to campaign (Republican). Have you ever thought about what you do to yourself? How absolutely disgusting you are.

Lost two freezers of meat in this Whirlpool. Changed Motherboard twice. Wouldnt keep ice cream frozen. Tech told me I was buying cheap ice cream. Was told by Whirlpool that they dont replace freezers. Received a call from another WP rep who did replace it. Waiting 4 weeks now because trucking company wont come up my driveway in snow. It was here once out. Driver didnt know how to change unit out. Waiting for exp driver now.

This is NOT a true review of the oven as I have not used it for baking yet. I just wanted to make a comment about my new oven which was installed this morning. I turned it on as instructed and heated at the high temperature to rid it of the odours. When it is turned completely off the cooling down process begins, which blows the hot air from the oven into the room, causing some annoyance from the hot air, as well as the noise. Not sure I am going to be so happy in summer. I am certain it is a wonderful product for baking results, but with this annoying feature, I am not feeling so happy about it.

My old 25 yr old Whirlpool died and was shopping for a new one. I saw the Cabrio and was really impressed by the features and large capacity interior. I can say that I thought my clothes were getting clean until I looked closely. I have never been so disappointed with this washer. I wish I had my old one back! Clothes arent clean, they are so twisted when I take them out and theres a horrible smell, like oil burning when it runs. The machine would fill up and when it would start to wash, it wouldnt, it would stop. And a loud humming noise was coming from the back.I shut it off and turned it back on and it wouldnt clear. I had to unplug it and plug it back in to clear it and start over. The bearings are gone now and I was going to have a repairman come and look at it, but now I wont bother! After reading everyones comments this Cabrio is a piece of junk and Im sorry I ever bought it! So now Ill be shopping for a new one tomorrow with an agitator!!! Im not impressed with the HE appliances!!! Ive owned this POS for not quite 6 yrs. Expensive to purchase and I will not recommend Whirlpool to anyone! Its sad that companies today make cheap products!! Built to last... ha!! Well never see those again!!

Bought this model #WTW8500DC from Lowes in 2015. Ever since had problems. Stopping in the middle, not starting, recently keeps running water, lid lock issues, had multiple service calls and multiple hardware changes, paid extra for extended warranty from Whirlpool hoping that within a year all problems would be gone after so many repairs. Boys I was wrong. After spending around $1200 between this machine and the extended warranty, three year later after the warranty expired now I am stuck with this non-functional piece of junk and looking for another washing machine. Would love to hear from Whirlpool if I stumbled upon a lemon, or three year is expected life of their $1000 plus machines.

Do not buy a Whirlpool fridge unless you like the sound of knocking every time it starts up. This has been fixed twice to no avail. I read about this before buying but thought it was an exception when it happened. Not so, it will happen to you & their fix will not work. Beware & heed this advice from someone who didn’t & not has major regrets. There are many other brands, buy them.