This washer is 5 years old and the top is rusting out on the inner rim. I have city water that has been tested and found to be totally safe to use and drink. Neighbors using the same water and owning different brand washers have no rust problems. Does anyone else have the same problem with their Cabrio washer?

We had the refrigerator delivered in March, 2013. We noticed a leak in February 2014, only because we smelled a musty smell in our garage, and removed the rug outside the door, from the garage to the kitchen. Then we started noticing water in the garage. It was shortly after we determined it was the refrigerator. We bought this at Lowes and they use A&E, and they did not show up for the first appt. They did replace the pan a few days later while we had to replace dry wall behind the fridge. This time around (month later) we noticed the fridge/freezer was not cooling. So A&E came out and determined its the compressor. So now we threw out hundreds of dollars of groceries, and water was leaking all over the floor again from ice thawing. I believe the refrigerator has had problems all along. We have had it for one year. I think we should be reimbursed for the compressor! Thats the least Whirlpool can do after losing so much food and money spent on the wall, and all the water mess etc. I will never buy Whirlpool again, and I will never purchase from Lowes again. We always bought at Lowes, but this was a bad experience, and I get told one thing on the phone with reps and another by A&E.

I just wanted to post a quick response to a problem that so many people are having with their Whirlpool FG1H5040T3NOV Hot Water Heater. The biggest problem is the Pilot Light Wont Stay Lit. Ive had this water heater for many years now (since 2005) and two days ago we didnt have any hot water. I checked the heater and found that the pilot light was out and that when I lit the pilot light with the igniter, it wouldnt stay light. This could have been a number of problems causing this issue but heres what I did to get it fixed. I looked around on the internet and saw that many people had this same problem and several years ago Whirlpool gave out warranty replacement upgrade kits to fix it. I called Whirlpool support, gave them my serial number and mentioned the upgraded kit. Unfortunately, my 9-year warranty expired a few months ago and I am no longer able to get the upgrade kit for free. Apparently this upgrade kit was part of a settlement for this water heater that was sold through Lowes. The upgrade kit has a few enhancements including an adapter to allow the use of a standard right hand threaded thermocouple as well as a larger pilot light window and added safety thermal switch. This is definitely an improvement over the old.Anyway, I looked at Lowes website for this upgrade kit and their description and internal part number is slightly different but it is the same thing as confirmed by Whirlpool. Whirlpools part number is 6910813 for the conversion kit. Lowes calls this part American Water Heater Company Gas Enhancement Kit 5040T NG. This kit is only $35 which isnt bad. So, I went to Lowes, purchased the kit. The instructions are included and are even good for a novice. It took me about an hour to complete the changeover. Youll need to remove the old burner and orifice to use them on the new kit. I then checked for gas leaks. I lit the pilot and when I turned on the heater, the burner lit right up. All is good now!

Burners always needed replacing and now do not work anymore - Whirlpool range looks nice, but very expensive to maintain. The burners constantly needed replacing, they do not heat up. I got a repair technician to look at it. He replaced the parts that the burners hook into. Now they do not heat up at all. Well, one of four barely boils water. The oven still works, oh great. The thing is only 7 years old. I have had ovens that lasted 20+ years at my dads house or 15 years at another house I lived in. With all the negative comments and the repair guy who tried to fix it, I think it is time to get the kids Easy-Bake Ovens out of the storage or buy a new range. Obviously, it will not be a Whirlpool. So many negative comments people left, my useless top burners seem mild comparatively.

Talked to tech & checked the manual for testing the thermocouple on my natural gas water heater. Everything checked out fine but pilot wouldnt stay lit. Tested thermal switch.... everything. They said replace the valve/thermostat. Still no dice. Turns out the thermocouple was cracked on the inside near the burner assembly & would give passing readings on the voltmeter 9 out of 10 times. If you have any pilot problems, replace the thermocouple first. Was only 10 bucks. I keep a spare now. Dont forget to vacuum any dust from the fine mesh screen on the very bottom. Fresh air supply.

Whirlpool 27 cu.ft french door bottom mount WrF989SDAH White - We took delivery of this ice making fridge mid-September from Sears Canada. 3 weeks later we have ice at the ceiling/wall seam at the back inside the fridge. Water collects along the rubber seal of the freezer drawer which we have to mop up. We said we were not going to use the water/ice maker and its not even hooked up. Water comes down through the water dispenser onto the panel which we also mop up. Moisture in fridge. Temp settings are as factory specified. Whirlpool authorized tech guy gave us the inside info. Hes seen so many design problems with this model and what Whirlpool do is order the tech guys to say to customers we can order the parts and fix it. Whirlpool keep discovering and modifying the problems but you are not allowed a refund off the bat because the tech guys authorized & sent out by Whirlpool are not allowed to give a report to the retailer or say its design defective. So the customer has shelled out money and has to have band-aids left, right and center. Went to Sears to ask for a refund. They refused because tech guy wont give a report to them (but what do we really know eh? Because the tech guy stood in my kitchen and gave a verbal report to Sears but nothing written). So Im in the hole for a crap product that is only a few weeks old and Whirlpool and Sears have got us over a barrel. The tech guy said he was going to challenge their tech line now because hes upset at how many of these band-aid fridges hes seeing now. I want a different brand and model and cant have it because Sears dont have it. In dire straits now.

I purchased cash for our new house and we notice a couple of times the freezer would start to thaw and the light bulb would freeze up. It has been ok for a while now.

What a disaster! Within one year we had to repair the stove twice, the dishwasher and the fridge! Almost three years later, we are experiencing problems with two burners and with the fridge! The company does not stand behind its products. Avoid them.

I have Whirlpool gas range, model # WFG361LVS1. The igniter went out after only one and a half years of light use (4-5 times a week). I did not buy the extended warranty, so part is not covered. I only asked that they send me the part for free. I talked to a supervisor at Whirlpool (Dave). He said I should have bought the extended warranty. He said he could not help me. He was also very rude. I will never purchase another Whirlpool product.

Stove was purchased in June, 2021. Two months later, oven will not heat up!!! Contacts Whirlpool, and TEN days later, a service person finally shows up. Problem appears to be a circuit board that they dont have, and has to be ordered! When will it arrive? He has no idea!!! I called Whirlpool, but its frustrating and a waste of time. You only get to talk to someone that appears to be reading from a script! If were lucky, well be without an oven for one month; however, it could be two...or three...or four!!! My advice: Dont buy this stove/range!!! Not only is the oven an issue, but it just seems flimsy and subpar quality, especially the oven door. Added to that, the glass top is very difficult to keep clean... Worse than any glass top stove weve had in the past.

They sold me a washer that did not work. First load failed and the machine locked closed. Error E1 F9. Took 7 days for technicians to open the machine. The laundry was rancid by then. Needed a new drain pump motor, which was installed 37 days later. Whirlpool offered $150 for my loss of clothing. Ridiculous. Value $900, I asked for $500. Awful.

We purchased the Cabrio washer and dryer set 2 years ago (7/22/15) from Lowes and have HATED them since day one. The first wash in the washing machine left clothes dirtier than when they went in. Our clothes have never gotten truly clean. The washer has a HUGE tub which is what I liked about it so I can wash my King sized comforters. What a joke that turned out to be. The comforters only get half wet even on the deep water setting. The machine even left dark stains on my light colored comforter and ruined it. Fast forward to 2 years later and the washing machine stops spinning and fills with water clear up to the top of the tub and wont drain. I had to put the machine on the rinse and spin option to get it to drain. Tried a different setting and it worked for a few months but started doing the same thing. The washer seems to be unbalanced no matter what size load I do. I am thoroughly disgusted with this machine and wish I would have never purchased from Whirlpool. The dryer has always worked fine until recently (2 years after purchase). It quit drying the clothes and leaves everything twisted up and wrinkled, even if I take them out of the washer and shake them out before I put them in the dryer. Doesnt matter what setting I put it on, the result is the same. So now it seems as though BOTH of my machines only lasted 2 years. Im not going to bother fixing them, these will be used as target practice. I will never buy another Whirlpool product again.

We purchased our Whirlpool Gold series, french door refrigerator 22 months ago. The freezer and ice maker has stopped working. We had one repairman come out already and he couldnt fix it. We have another one coming in 2 days. I am very disappointed with the Whirlpool brand. I also bought a microwave, 2 wall ovens, and a dishwasher at the same time. The microwave makes a clicking noise every time you use it.

My Calypso washer is broken AGAIN. I have spent more in repairs than the machine cost originally. After more than a dozen emails to customer service they have still not answered me even once. Its obvious they put as much pride in their customer service as they put into the assembly of their products.

I purchased A Whirlpool washer model WTW4816FWD some six months ago and it is worse than my 13 y/o washer I got rid of. When wringing clothes it seems be out of balance as it bangs like crazy even when clothes are adjusted. I thought it was the feet but no dice and the auto sensing levels allows for the washer to fill completely with only three items in it? The noise it makes while washing can be heard throughout the whole house too. The cycle takes three times as long of any Ive ever used! I hate this thing.

Love the chrome exterior and overall appearance of this side-by-side. The compartments and shelf spacing are well thought out & offer flexible adjustments. The outside components on the freezer (crushed ice, ice water, ice cubes, & light) I love, and most importantly the unit comes with a built-in replacement water filter.

I too expected a whole lot more for the price I paid for Whirlpool WTW5000DW1 HE washer top load. Fuzz, grass, pet hair and food remain after washing. Had a repairman out to look at it. There is nothing wrong with it. He says they do not use much water to save money. Well, if I a have to wash everything at least twice am I saving money? Think. Will look into an old fashioned washboard next time. Frankly I think it is a scam. The HE Tide is more concentrated and my clothes do not come clean! Tried to get my money back from the company that sold it to me and I was told only if I were to buy the $900 Speed Queen. Someone’s making a lot of money from consumers who need washing machines.

Worst company for home appliance... I got my fridge repaired from an authorized service person and next day it again stopped functioning. Upon calling the service center again, they said that few more things needs to be repaired once again and for that fridge needs to be moved to their workshop and for that they will be charging 1600 Rs again. Upon asking for the refund for the useless spare part, the rude service person said ek din k liye to chale tha na fridge, fir kis baat ka refund... Such a ** company is Whirlpool that they are not entertaining any complaint on their all India customer care number...

I purchased a fridge from them a little over a year ago. First and LAST EVER. The freezer door started to sag and when I called them I was told my warranty expired a month ago. Had a Whirlpool service person look at it and told me that the cost is $110 plus $45. I said that is fine. They scheduled another appointment but I received a call 12 minutes before the time expired (as you know they say in the afternoon and no exact time and they said between 2 and 4:30) and the guy asked me what is wrong with the fridge. I told him that someone took a look at it a week prior but I had to go through the whole thing. Then he said that they dont have the part and I have to wait for a week. This was a Saturday before Xmas and waited all afternoon to be told that was very upsetting. Any how I called customer service and spoke with a Michelle. She said she is going to try and find out if she can waive the additional service fee, arrange the time and will comp the parts (around $15). After 45 minutes on the phone I had to jump off for a business call so Michelle said she will email me and I gave her my email.Few hours passed and no email. When I called back the idiot that answered the phone kept saying that the warranty is out and I need to call another number so I asked for a supervisor. I was on hold for 11 minutes then I was hung up on. I called again and asked for a supervisor. Spoke with Benjamin (Opt# **), he said that Michelle notes did not state anything about help in possibly waiving anything and that I refused the parts. I was furious. What a LIE. Long story short he said they cant waive anything and I should call the scheduling number for any help. I asked to speak to Michelle and guess what the answer was... SHE IS BUSY. What the hell. The service is well below zero as well as the quality of the product. I am going to send a letter to the office of President (Jeff Fettig) Whirlpool Corp. 2000 North M-63, Benton Harbor, Michigan 49022-2692. It is so sad when corporation are so big that little people who buy their products dont mean much to them.

This Cabrio Washer and Dryer are horrible!!! Dont ever buy one, they will not fix the F1 code, and Whirlpool customer service is non existent!! I hate this company, and will never buy a product made by them again! Be aware that Whirlpool makes products for Kenmore, Maytag, and a few others!!! I just want to spread the word about this washer! If you just bought one try and take it back for something else!!! STAY AWAY FROM WHIRLPOOL!!!

I just want to say that this washer is indeed a colossal waste of money. I bought an HE machine thinking Id be environmentally responsible, but the amount of times I have to re-rinse clothes negates that. Whats worse is that clothes come out dirtier than when they go in. Thats right--just put a brand new set of sheets in the washer and when they came out, there were dissolved detergent marks and gray, linty patches all over them (this using warm water and a soft gel detergent)--resembling dirt you might get from hanging clothes on a mildew clothes line. I cant tell you how many times I need to re-run the drain and spin cycle. This wastes time, water and quality of life. Id try to re-sell it on Craigslist but wouldnt want to subject anyone else to it--not fair even at $100!Updated on 02/23/2015I wrote a review in September 2014 on the Whirlpool cabrio model WTW5600XWO. To update the community on my recent customer service experience with Whirlpool: I wrote them a letter a few weeks ago stating that I dont expect them to follow up but wanted to let them know I would be buying Bosh products from now on and reiterating my anger at needing to miracle brush any dark piece of clothing after it goes through the cabrio. My letter specifically said I did not expect customer resolution but wanted to express what a rotten product they produced and marketed. They called back leaving a message to the effect: We apologize want to help you but need to speak in person. Please call [toll free number] and have your make and serial numbers available. I called back, and after waiting on hold for 10 mins., the rep took my model and serial numbers, said, Oh I see your letter. Please give me a moment to review it. Then I was told there was nothing she could do. I do apologize for your frustration. I couldnt BELIEVE they would bother contacting me only to make me go through that charade-- They are PATHETIC! I say boycott the company! Well, I certainly will.

I like the Whirlpool oven ranges because it is easy to operate, easy to clean and like the features and functions. I have had no issues with the stove and I have had it for four years already. So far still working good.

Our daughter has a Whirlpool Duet front loader washer & dryer combination which is less than 3 years old. The washer shows fault code 71 and will not run or release the door lock. The first repairman said the interface board and/or a computer will need to be replaced. Cost is $600 to $1,000. I called Whirlpool. They recommended their trained tech be called out. He looked at the broken machine and determined the interface board was bad, and he put a temporary repair on the washer and said Its okay to use for now. He will return in 2 weeks with the replacement part. We tried the machine with a load of clothes. The machine filled up with water then quit, and the door was locked. We called to get a tech to open the door so we could retrieve our clothes. No one is available for 1 1/2 week. I called Whirlpool and was told a claim form would be mailed to me so we could be compensated for the damaged clothes. The letter arrived. I was appalled when I read it. First, it came from their Legal dept. The intent was to scare us into getting a lawyer or just use our homeowners insurance for the damaged clothes claim. I called Whirlpool back several times and was told too bad, so sad. Whirlpool might make a good machine; they cant prove it by me but their support rates a big zero.

I bought the Whirlpool Cabrio top loader set in 2006. Honeymoon was over after the first year and I had to change the dryer element then the washer with the F51 code six months later. Last year, I had to replace the heating element again! For the last six months, I have been dealing with the dreaded UL on the washer. I cant afford to pay a technician $100 to come out and tell me whats wrong let alone what they will charge to repair a problem that, from the looks of this message board, will never be fixed. I have no choice but to get it fixed in order to sell the ** machine. I paid $1400 for this brand new set and have already invested $500 in repairs. How is this possible? I had a 20-year-old machine prior to this and never had an issue. There are lemon laws for cars, why arent there any for appliances over a certain amount? How in this day and age can a company be allowed to sell such garbage? I will never, ever buy another Whirlpool appliance as long as I live. Any other brand can have my money any day.

Purchased Whirlpool Microwave 1.6. The design has 5 BIG flaws. 1. Too large in depth, cabinets on each side cant open. 2. The one light under unit is so far to the back wall, you need a flashlight to cook spaghetti or use stove. 3. Too large in height, cant get a big pan on your stove. 4. Top of unit is open so much, if you spilled something from the cabinet above it would go right inside the works. 5. Instructions are hard to read & figure out, the wall hanging support is just one piece and if you dont have 2 main beams youre out of luck. GO buy a GE, put it up in 1/2 time & good & secure and works great. Has 2 lights on each side under unit. Fingers over the holes at the top. 1 inch shorter, 1 inch thinner. To my surprise the turntable is even larger, go figure.

Not completely happy with my purchase of the Whirlpool Gold Series refrigerator I just paid off this month. Have had the refrigerator for one year. To be as large as it is, it really doesnt seem to be able to hold that much food. The refrigerator is on the top and the freezer is on the bottom. We began having issues with the ice in the ice maker becoming frozen together and forming clumps of ice. The ice felt damp to the touch rather than feeling completely frozen. We called the manufacturer and they said to be sure the vents in the freezer section were not blocked by food. So you have to be sure to load the freezer so that food doesnt block the vents. Additionally, when filling your glass with ice from the door, unless you are EXTREMELY careful, all of the ice will not go into the glass but spill out onto the floor. Weve had the refrigerator for one year and I still have ice coming out that doesnt make it into the glass. It is not user friendly at all. One last thing - the refrigerator has double doors and to get to the section of the middle pull out drawer, you have to open both of the double doors, letting out a lot of the cold air. For the expense of this particular refrigerator I would not recommend purchasing it. My last refrigerator was a Whirlpool as well. It lasted 17 years and I was very happy with it. This Gold Series was supposed to be a step up, but I feel it was a step down.

The exhaust fan for the gas range runs when using the microwave. The noise is loud and very aggravating and there is no way to turn it off. From what I can find the older models there was an option to turn it off. On the new models Whirlpool cut costs by not putting a small (QUIET) fan in the microwave but used the range fan for a dual purpose.

Weve had this washer for about 9 months now. We noticed that the loads being washed small or large werent coming out clean. When wash cycle finished items were covered in soap residue and or had large dry spots where water had never touched the area. When our sheets were washed in bulky/sheet cycle and deep water this happened. Maytag sent out repair person to find the water pump went bad, pump was replaced. After repair same bad washing results as stated previously. Maytag then sent out repair person for the second time. This time the main electrical board was replaced. Still after two repairs wash loads are still coming out dirty, soapy, dry in spots in any of the selected wash cycles large or small. Third call to Maytag and a third scheduled repair date coming up in a few day. Over the phone the Maytag employee only words of wisdom was, Did you buy the extended warranty. So unless there is a third failure I believe that this washer is just a poor design.

Purchased a Whirlpool french door refrigerator at Lowes less than two years ago. Last week the freezer compartment failed, out of the one-year warranty of course. The independent tech who came to service the machine told me of all the refrigerators he services Whirlpools are the closest to total junk and he would never recommend them. Wish I knew him before I bought this soon to be piece of trash. The CEO of Whirlpool, Jeff Fettig, received total compensation valued at $14.4 million in 2010, up about 15% from a year earlier, the appliance maker reported in a securities filing recently. Appears to me that Mr. Fettig is ripping off customers for his own gain, with his boards approval. Shame on all of them -- another example corporate rip offs that are plaguing our nation.

I bought a refrigerator from Lowe’s and the refrigerator had a lot of manufacturing defects. I called Whirlpool and 3 techs were sent to my house. After the last tech, Whirlpool decided to exchange the refrigerator. Since then, Whirlpool has been playing games with me.

We bought a new brand Whirlpool, ice berg, 2 door refrigerator in 2006. It worked fine for 6 months and then started giving all the problems. Until now, we have repaired it at least 10-15 times with company servicemen and also private repair shops. We are just so tired and frustrated will all that we have gone through because of this fridge. Today, the main door just came out and it is probably the 16th incident. We are hardworking people and take a lot pleasure and find lot of happiness in buying something new. It took us almost 2 years to save money for this new fridge with cost us about Rs. 20,000. But I should mention this that we have already more than Rs. 10,000 in repairs.I am sure this would just be another email in one of your inboxes but wanted to write this and convey the message that we are hurt. We do not want to take any legal actions as middle class men in India do not have the resources to do that. But I would surely not buy anything of your brand going forward and would not suggest anyone for it. Writing this in assumption that you understand the pain middle class men goes through to but something worth Rs. 20k and spends another Rs. 10k for repairs. We had high expectations from your product but that was not to be.Following were the problems we face in last 4 years: 1. Refrigerator not cooling (5-7 times); 2. Top door broken (1 time); 3. Main door broken (1 time); 4. Water leak problems (5-7 times). I hope someone will read this and forward it to concerned department.

I purchased a matching set Whirlpool Cabrio top load washer and dryer in 2007. Bought from Conns for $2,100. After 3 months of ownership, the circuit board had to be replaced on the washer. Three months later the heating element was replaced on the dryer. Just recently I spent $350.00 to replace 4 drum suspensions. The washer literally shook my home. 3 weeks later, the circuit board needs replacement (code F1). Estimate to repair - $325.00. The dryer is not working properly. Im having to run the clothing thru 2 cycles. Back to the washer. It shreds my towels. Ive read where other consumers have had this same problem. These are expensive towels. So, only 7 yrs. into ownership and I am replacing this junk with the old school washer/dryer. Unlike the Cabrio washer, I will have a washer with an agitator that will actually clean my clothing. Whirlpool manufactures trash and the Cabrio duo was the worse purchase I have ever made. Do not purchase Whirlpool and definitely do not purchase Cabrio.

I am on my second Cabrio. The first one only lasted a few years, but I stayed with the Cabrio line because I didnt want to replace the dryer. That was my first mistake. The second Cabrio washer constantly leaves a white residue on dark clothing. I used an HE detergent, reduced the detergent and put the dark clothes through an extra rinse and still find residue that has to be scraped off. I called Whirlpool on Dec. 19th, 2018 to complain about this and was told there was no history reported of this kind of problem. Then I went on the ConsumerAffairs website to learn that many others have the same residue issue, among many other products. I will not ever purchase a Whirlpool machine of any kind again.

Worst refrigerator (French Door Refrigerator WRF989SDAB00) ever! Even though this Technical Service Pointer was issued, it takes forever to get any satisfaction from Whirlpool. They were not pleasant to deal with when calling the Whirlpool Corporation. I had to research the problem while on the phone with their service representatives. The technician arrives and confirms that the evaporator in the fresh food section is indeed the problem but then it takes days for the parts to come in and then another appointment will be scheduled. Whirlpool does not provide good customer service. A refrigerator should last more than three years. Very disappointed and would never recommend Whirlpool to anyone.

I purchased the Whirlpool Quiet Partner II dishwasher, Model DU1055XTVQ0, Serial # FY3762359. The racks are cheaply made and rusting! Almost all of the tips on the racks are rusting, causing them to corrode and break off completely! This dishwasher is well under 5 years old. Not sure what we paid for this machine but the racks should not be doing this after this short length of time. They shouldnt be doing this after any length of time.I called Whirlpools customer support center today and was told there is nothing they could do. The support agent asked if I had hard water, if so, that could be causing the problem (I dont have hard water). The agent stated that they do not cover rusting racks nor would they replace them, now I see why. They are expensive to replace. As of now, I will not be buying another Whirlpool appliance - ever! They just lost a dissatisfied customer due to their very poor quality and customer service.

I purchased a Whirlpool washer in March 2007. That washer is now leaking from the bottom. I called Whirlpool. I was told that the machine only had a one-year warranty, so repairs would be at my expense. The CSR then offered to schedule a service call for me at $139, which I refused. A few weeks later, I received in the mail an offer for an extended warranty on my Whirlpool washer.

Sole owner/operator for 6 years using same products that came packed with dishwasher. Bottom rack has simply crumbled away, prong by prong at first and now large sections. Inferior quality of coating and metal used for the forms, means it wont withstand the daily use for which a dishwasher is intended. Worst quality control ever!!

We purchased this washer (Whirlpool Cabrio) about two months ago and we have been extremely dissatisfied with its performance. Quite simply, it does not get clothes or anything else clean! I have tried every possible setting and still the dirt remains on anything that is even slightly soiled. So, I cant believe that things that dont look dirty are getting cleaned either. They probably arent even getting rinsed, even with the extra rinse option. It seems almost nobody likes this machine, so why is Whirlpool risking their formerly sterling company reputation by keeping it on the market? I would be happy if I could return it to the store for a refund, but that is not a possibility as far as I can tell. If you are considering buying this machine - dont!

I needed a new washer and dryer, as I sold my other ones with my last house. I have been so happy with the economy of a front loading washer, and the clothes really dont require pretreating because Tide and the washer take care of everything!

Originally, I loved my machine. At the one year mark, my washing machine began a f51 error code. I looked it up and it had a recall. The entire board had to be replaced. Now, I keep getting a ul code and it will not quit. Also, the inside of the top is rusting out so badly that chunks of rust fall into the washing machine and stain my clothes. I wish Whirlpool would fix these common errors. I see many other people complaining online that the same thing is happening over and over.

I bought a Whirlpool Dryer after reading an excellent review in Consumer Reports, despite it costing more than I wanted to spend. The first thing I noticed was a thump, thump, thump with every rotation of the drum. Then I realized that it took twice as long to dry my laundry as my 45 yr. old GE dryer, which only needed a belt, but which wasnt available anymore. I was disappointed in the Whirlpools performance, but that was only the beginning. One night when the dryer was less than 3 months old, I was in bed for the night and I heard the familiar thump of the dryer running. I went downstairs and could not stop it as it did not respond to anything on the digital control panel. I finally unplugged it. I called Whirlpool and they sent a new control panel, but I had to pay the service man.Not too long after that, the dryer heated up, but the drum would not turn. The serviceman said that it had come off track and he reset it. Shortly after, the door would not stay closed as the clamp that held it shut had fallen inside when I pushed the door closed. I replaced that. Then the drum continued to come disengaged because it was out-of-round. But, of course, the dryer was out of the 90 day warranty period too and a drum replacement would have cost more than the piece of junk was worth. So, I had it put back on for what I told myself would be the last time. Well, it was the last because the control panel went bonkers again and would go on by itself and only ran on one cycle if I plugged it in and unplugged it when it was done. I finally gave up and bought an inexpensive analog GE dryer which I never had any trouble with and dried the clothes in less time with less noise.

I had my washing machine for about 10 days before it stopped working. I did about 4 loads of laundry. We have had 3 repair people come check it out, all referred by Whirlpool. They each had a different theory on why it wasnt working properly. Im now waiting for parts to be delivered and then service to be scheduled. When I contacted customer service, I was told (after waiting on hold for about 1 hour) that it was customer misuse. Ahem, first I heard that, and I think I know how to use a washing machine. I asked to speak with a supervisor. More waiting. Tina (#**) told me she will contact the service company about the parts. I told her to please conference me in on the call because I want to hear the outcome (and I dont want to wait another 1+ hour to reach customer service again). She put me on hold and then disconnected me! Really, all this time and 3 service people... Would be cheaper to just replace the machine altogether. What a headache!

Ive had nothing but problems with the Whirlpool Cabrio washing machine and dryer. The motherboard has been replaced three times, once on the dryer and twice on the washing machine. The inside of the washing machine is going to fall apart because of the rust at the bleach holder. I saw some of the complaints. Is there any way we (consumers) can sue Whirlpool for selling defective units? We are from all across America and there is no way we should all have the same complaint. The stores that are selling us these items should be held accountable. Also the only thing Im getting from them is, Theres nothing we can do. PLEASE DO NOT BUT WHIRLPOOL WASHERS AND DRYERS!!!!

I purchased Whirlpool dishwasher, model DU930PWSTO, in 9/2007. It quit working in 5/2012. I expected an appliance made by a reputable manufacturer (Whirlpool) to last longer than five years. It seems like a manufacturing racket where they build these things only to be replaced a short time later. With service calls and parts replacement, its cheaper to buy a new unit. Talk about a circle jerk! And who the heck puts anything else but SS screws in a water soaked appliance? Duh. Rust! Im disgusted and dissatisfied with the whole company. Im still waiting on their response to my complaint email; at the time, the machine quit working. Whatever happened to pride in American made products? Or, did this get company bail and were now slaves to the Chinese junk once again? Ill never buy another Whirlpool appliance again. Does anyone have anything good to say about this company? I wish I would have read this blog before purchase.

I have had this refrigerator for over 25 years and cant ask for anything better than that. Would buy another Whirlpool refrigerator. Has original french doors at top and bottom door on freezer. However, I dont particularly like the pull out drawer that the new refrigerators have now as I get so much more room with a door. The new refrigerators have improved rubber around the doors. That is the only thing I had to replace on this refrigerator.

40-gal gas water heater - I own several rental properties and unfortunately put Whirlpool water heaters in them when the old ones go. It is because they are at Lowes and they are cheap. Today, another call came in from a tenant with no hot water. I called customer service and they determined I received the repair kit from an original design defect from back in the middle 2000s. Now 3 years later, it goes out again. Because I have already received the conversion kit taking thermal couple threading from LH to RH, I needed another part number to repair for a grand total of $160! The same part before the conversion kit was $60. I will never buy another Lowes/Whirlpool water heater for as long as I live. I own a hundred rentals and Whirlpool will never again see another cent for the junk water heaters.

Purchased in Nov. 2013, by March 2014 noticed water leak on floor, after 8 service calls in 3 months it was deemed unrepairable By Whirlpool. Got a new fridge in June 2015, no cost to us, but have had 2 service calls already for the same problem. The first leak damaged our kitchen floor, and the ceramic tile that we have is no longer made so we have had to file an insurance claim on our homeowners to pay for repairs. I would never buy any Whirlpool product again, or buy from the local company we bought the original fridge from.

My husband and I remodeled our home and needed a new refrigerator... I wanted to try a Samsung, but after exhaustive research on my husbands part, he insisted we purchase a Whirlpool fridge... From the get go, I have regretted that decision. The main reason being the door on the L side of the fridge does not close completely. Sure, it alarms for a time, but what about all the times I close the door and leave the house. I have had to dispose of more groceries than I care to think about... Never again will I purchase anything by Whirlpool!

I’m disappointed in this dishwasher, it’s not yet a year old, and it doesn’t clean the dishes, and it also does not dry them. I now wash and dry my dishes by hand, the machine stays soaking wet even two weeks after running it.

I purchased an HIE washer one year ago this month. I have never been happy with the cleanliness of the clothes when they came out of the wash. The only way to get them moderately clean is to wash a few items at a time and even then the whites, especially socks, seem dingy. I noticed the new Whirlpool washers now have an extra setting to add more water to the machine, so the executives have realized there is a problem with the original model.I think Whirlpool should give all customers who previously purchased the models without this feature a trade-in option to get the newer model that fills with more water or for another model with the full spindle that has worked well for so many years. I have been very unhappy with the performance of this washer and would only hope the executives would do something to resolve this problem and satisfy previous customers.

Late on the evening of Monday, January 27, 2014, after springing a leak in my 8-year-old water heater, I purchased a new Whirlpool model N50T61 replacement from Lowes. Installation went smoothly and the unit lit off fine the first time. It heated the initial tank of water rather quickly, but the next morning, I noticed the status light on the control unit was not blinking, which indicated the pilot light had gone out. I relit the pilot light, the water heater fired off and appeared to be working properly. 12 hours later, the status light was out again. I relit the pilot, but within 20 minutes, it went out again.On Wednesday, the 29th, I called Whirlpool customer service and explained to the representative what had been happening. He stated that since the status light was not blinking a code, the problem was either an air supply or venting problem, and he couldnt help me. I relit the water heater again and performed the match smoke test described in the owners manual on the vent connection. It did exactly what the manual said it should do, so I assumed that was not the problem. However, while performing this test, the water heater went out again. This time, being right there when it shut off, I saw the status light blink twice about 5 or 6 times before it quit blinking all together. The two blink error code indicated low millivolt signal from thermopile.I called customer service again and explained to the representative what the first person had told me and also told him the results of my test and that this time, I had observed the two blink error code. He asked if I had a multimeter (which I do), so he had me disconnect the wires for the thermopile, connect the meter to the wires, light the pilot and read the voltage. My meter is an old analog unit, and not capable of reading millivolts (which is what the thermopile output is), and I informed the rep of this, but he had me do it anyway. As I suspected, I saw absolutely no reading on the meter. The service rep stated that he believed the error code and decided to send me a new thermopile assembly. However, their shipping department was closed for the day and I should not expect to see the new part until Friday. This was unacceptable, but he stated that this was the only option available to me.After thinking about this situation for a while, I again called Whirlpool customer service and told the representative that I was not satisfied with the solution previously presented to me and that I wanted a return authorization to take the water heater back to Lowes for replacement. The rep stated he couldnt do that, but said that there were a couple other things I could try. He attempted to explain these procedures to me, but wasnt able to do so clearly. He stated he would email the instructions to me. As of this writing, I still have not received the instructions.In the meantime, I did some internet research and found that Whirlpool water heaters have numerous chronic problems, including the issues I was experiencing. I decided this was not a product I cared to own. I called the Lowes store where I purchased the water heater and spoke with the manager. I explained the entire sequence of events to him, and he told me to bring the water heater back for a full refund. Since my local Lowes store only sells the Whirlpool brand, I took the money and purchased a different brand of water heater from another home improvement store. Needless to say, it will be a cold day in hell before I ever purchase another Whirlpool product.

I purchased a refrigerator Model# WRF736SDAW12 on 8/9/14 and from day two, Ive had nothing but problems with the ice maker. We NEVER use crushed ice, but we get a lot of crushed along with cubed and crushed/shards of ice all over my fridge, hands and floor. My daughter (wearing her heels) already slipped and fell while walking past the fridge, not realizing that there was ice lying on the floor because my floor is light/multicolored, so we cant see the ice.After several calls, the repair person replaced all the components of the ice maker and the repair person was told (2/26/15) from the Whirlpool tech that we would just have to live with the problem because its normal and he was advised to tell me to get a larger glass. The repair person looked at my glass, seeing that it was already large, shook his head and said Whirlpool must want me to start using a bowl to catch all the ice. I couldnt believe it?! I bought this fridge expecting to receive ONLY cubed ice and yet I dont, so Im sure why they put that cubed feature on there when I cant utilize it. I only want a little ice, but the first thing that comes out is the crushed ice, and in order for me to receive more cubed ice, I have to fill up the entire cup that includes the crushed/shards of ice which floats to the top and ends up in my mouth. Thats the purpose of me selecting cubed, so I dont have to drink it!After the repair man left, I called customer service (2/26/15) and she told me that ice gets stuck in the chute?, so thats why I get crushed ice, but its normal she says. How is that normal? Please read all the reviews/complaints from both the Whirlpools and on Home Depots website for this model and you’ll see this is a problem, there is a flaw in the design.I cant believe a big company such as Whirlpool would treat me so poorly and brush me off like this. After the many posts I put on their Facebook page, they over and over say they will be in contact with me. I have yet to hear from them. I found another story on Pissed Consumer where a senior fell due to the ice falling all over the floor, so its not just me that it has happened to. Theyre putting people in a hazardous situation and they dont care.I have an autistic son who gets ice constantly, I can’t supervise his every move and I’m not able to keep up with his dropped ice nor can he remember to look down for it. I’m concerned that next time my daughter falls; she won’t be so lucky and could sprain or break something. How about my visitors? Do I worry about them suing me when they fall? I’m not so annoyed at the fact that I step on water with my dry socks or the 24/7 noise from the motor or the left door not shutting all the way than I am with the safety of my family.

We bought a side by side refrigerator/freezer in 2013 from our local Best Buy. We have usually bought Whirlpool appliances. Before we bought this refrigerator the last Whirlpool we had for 25 years. This past week our refrigerator went out. We called a repair man. He said the circuit board was out and would cost $450.00 to replace it. We decided to buy a new one. I am very disappointed that it only lasted 7 years. Oh I forgot to mention the ice maker went out about a year ago. We did get new filters as instructed. We did not buy another Whirlpool.

It works ok and fits in a tight spot. However, the top shelf will suddenly start to freeze the food and after a day or two it will stop. The fridge makes terrible loud banging noises. Were told it is the coolant but it is extremely annoying. A repairman moved the line closer to a heating and it doesnt bang as much. Because of this, I would not buy a Whirlpool fridge again.

My Whirlpool microwave has been serving me for over 20 years. Never a problem. It performs well at all settings. Size is convenient for mounting over range. I recommend highly because of reliability and performance.

Five years ago I bought a brand spanking new HE set with a top load washer, top of the line Whirlpool. That washer has been a piece of junk and getting it serviced has been a nightmare. It broke, i.e., the computer part, and was out of commission for FOUR MONTHS. I live on an island off of Alaska, luckily I rented one for the duration but STILL. That was an EIGHT HUNDRED DOLLAR MACHINE. I liked that they are new and shiny and look cool. I hate that the electronics broke after a few years. Ive had washers dryers that lasted TWENTY YEARS. The next set I buy will have plain buttons for cycles and NO ELECTRONICS. None. And still none. Electronics instead of plain buttons. Im not kidding, I will never buy another one with electronics. I bought a top of the line Whirlpool HE top loading set for over $1400 five years ago and that washer has been a bust. I have had a repairman out over 5 times and the last time he took it out and kept it in the shop for FOUR MONTHS. I will never buy a fancy set again. I will buy the old kind with the plain old buttons. Do not make this mistake yourself! Just buy a plain old one!

We purchased a Cabrio model WTW6600SB2 washer, it has lasted 4 years, then when the pump went out, we paid $200. To fix it then on the 2nd load, it went out, now the tech man says the motor is cracked and Im not sure if the motor is replaced, it will even work. I looked at the motor and it is made of plastic! Can you believe this? Plastic! I didnt believe it until I saw it with my own eyes. I will never purchase a Whirlpool appliance again nor will any of my relatives or friends if they ever ask my opinion.

Whirlpool wdf530plym4 - Bought this dishwasher 5/13. Sat for 3 months in the box while my kitchen was being built. 7/14 pump motor went out, called Whirlpool, they set me up with an appliance repair company, and I ended up paying $90. The technician was being nice, charging me less than he needed to since he said it was an easy fix. 1/26/2015 pump motor went out again. Called Whirlpool again. Lady on phone was very snooty with me, telling me it was out of warranty. Told them I was very dissatisfied, my dishwasher has broken 2x in 18 months and all she said was, I should have bought the extended warranty. Dishwasher is not even 2 years old and already needs to be fixed 2x. The most expensive part on the machine I may add. Going my average, I can keep dumping $130 every 9 months to have a working dishwasher by Whirlpool. I would understand if the thing broke after 2 or 3 years. I only run the thing 2 or 3x a week at the most.

I bought a Whirlpool washing machine last year. Exactly after one year the bearing problem and noise starts from it. So I do not recommend this machine to anybody because of this bad experience and also high service cost.

I bought a brand new washer from Home Depot, Whirlpool 4.3 cu High Efficiency Top Load Washer to be exact. It hasnt even been 90 days and it started to make the loud, horrible noise so we had someone come and look at it. Apparently the transmission blew and the oil leaked all over my tile floor. I work full time and I do laundry only on the weekends and there is only two people living in the house so you can imagine we do not use it that much. I went to Home Depot first and since it was past 30 days we had to called Whirlpool direct. The customer service is horrible. I thought since the transmission blew, they would replace the entire machine since that is the brain of it. NOPE! They said to replace the entire machine and give us a new one, it would have to break 3 times. Are you kidding me? They did not offer to reimburse the tile damage or the amount of money I had to spend at the laundromat. Not to mention its been over a week and the guy still has not come out and fixed the transmission. It would not be a big deal to me if the hose broke or something simple, but imagine if you bought a BRAND NEW car and the transmission broke 60 days after you bought it. You would take it back to get a new car. The customer service line could not care less about the issue. I spent over 2 grand in appliances from Whirlpool and I will never buy their product again because of the customer service and the fact they did not want to make the situation right. I just bought the machine brand new for a reason!

Product: Whirlpool Gold Series, Model WRX988SIBM01: Purchased 2014 at Lowes. 2nd day after delivery, called Whirlpool, refrigerator not working properly, freezer drawer will not close, condensation on outside. Sent person that delivered the refrigerator to fix problem, freezer had frozen ice behind each drawer approximately 2 inches that would not allow drawers to close. Delivery person used hair dryer to melt ice and adjusted drawers. Still periodically have to physically remove ice build up to allow drawers in freezer to seal properly. Ice maker stopped working, makes no ice at all, ice comes from inside refrigerator not from freezer, bad design.Today woke up to freezer drawers completely thawed and had to throw away all food, panel shows temperature at -2*. All food thawed and unable to be cooked/used. Called Whirlpool could not send someone until next Tuesday (4 days). We are a family of 5 and cannot wait that long. Unfortunately have called 3 other appliance companies only to find that refrigerator has to be repaired by special technicians! This is our first Whirlpool, bought because made in America, have been very disappointed with our $2500.00 purchase. Not sure that we will ever purchase another Whirlpool product, our inclination will be to buy less expensive product and choose to replace as opposed to paying recurring service calls + parts and labor.

Bought Whirlpool electric range in Dec. 2005..expensive..so the warranty expired a few months ago. The electronic keypad that controls the oven and lights doesnt work. The repairs will be $408 plus tax which is obscene, and are guaranteed only for 90 days.This after only 5 years of minimal use...just me using it.I will never buy whirlpool again.

I purchased a Whirlpool washer in 2010. It has started to rust. I called the customer services dept. They told me that there was nothing they could do about it because it was over a year old. I asked to be transferred to a supervisor. She told me the same thing. I told her that its not as if Im looking for a new washer. She said that there was nothing they could do; I had to pay for the repairs myself. I told her, After spending almost $1,000 on a washer, I have to pay for the repairs? She said, Yes, maam. I asked if I could speak to someone over her. She said that she had to take down my name and number and someone would call me back in 24 hrs ... from the management team.She asked for my number and not my name and said someone would be calling back. I told her, How are you going to forward the message without a name? Maam, Im sorry. Whats your name? I doubt if anyone will be calling me back. Whirlpool customer service sucks! They dont know how to treat their customers. Watch out for the warranty. What they call a warranty is not.

The Whirlpool HE H2Low Washer is the worst piece of crap Ive ever wasted my money on! It leaves soap residue on all my dark clothes! DONT WASTE YOUR MONEY! Whirlpool should be ashamed of themselves for continue to sell these pieces of crap!

We purchased a Whirlpool refrigerator in 2010, model #ED2KHAXVB01, side by side with ice maker. Fortunately, we purchased a 5-year service contract at the same time because the ice maker has broken twice. Unfortunately, I have had to replace the shelves while still under warranty quite a few times. The sides of these glass shelves are made of poor quality plastic and crack constantly. The drawers are the same way. The refrigerator is no longer under the warranty and Whirlpool wants $109 per shelf. I told them I would pay for replacement shelves only if they could send shelves that were made with better quality materials. Otherwise, I might be spending $1000 per year replacing shelves. The Whirlpool representative told me there is nothing that they can do. I see many people with this problem posting complaints on the internet. Do not buy a Whirlpool refrigerator. I have been married for 37 years and never had to replace one shelf in any refrigerator and still have a 40-year old refrigerator in my basement with no broken shelves!

We had bought a whirlpool refrigerator (Model - DC 205 5S/2016) in late April 2016. Initially I noticed a whirring sound after 6-7 hours of switching it on. As nobody from whirlpool had come for installation or any follow up even after requesting, we let it go thinking that nothing could go wrong with a new fridge. Nevertheless, the disturbing sound continued, until I noticed exposed wires running crisscross atop the freezer box and below it, one even preventing the chiller tray to be pulled out easily. Also, we had to get a stabilizer to reduce the notice even though it was written in big bold letters that it was a Stabilizer free refrigerator.After 8 months of owning it, we went for a three-day trip leaving the refrigerator on and set at point 3 in the cooling knob of which 5 is the maximum. On returning back, I noticed a crack at the top right corner of the freezer door and saw that ice had built up covering that side of the freezer inside. Again, as I had to leave for office within 1 hour, I let it rest and went. In the evening we noticed that the crack had extended, so we defrosted the fridge. The next morning I found a small piece of the freezer door floating in the defrosted water, and the freezer door was unhinged and askew at the top, in fact a part of the freezer doors upper right hinge had broken due to maybe the pressure of ice buildup, which had caused the crack that we saw.Shocking it was at first to learn that a freezer door be made of such low standard material ignoring the other fact of wires jutting out of the freezer at top and bottom. As the warranty period was 12 months, I immediately called the customer care, who put me on hold for 8-10minutes and disconnected, this repeated 2 times after which I was frustrated enough and vowed not to use the freezer again.After almost a month a more responsible member of my family took it upon himself and raised a complaint which was answered and a service person came home with a dirty looking and completely scratched piece of replacement door for the freezer. He informed that plastic pieces never came in warranty and we had to pay for it. Upon asking for further clarification he called his manager, Hemanth who was too rude and informed Madam you have pulled the freezer door apart which has caused this. Also, he was asking me specifically are you lying as you said initially that you left for 3days and now you said 5 days? We had left on a Friday night and came back on Tuesday morning, which means 3 complete days out of station. I never knew the exact number of days mattered as a fridge was supposed to be switched on continuously for days.Also, finally Hemanth was informing like if it was some mechanical or electrical fault we could have done it free of cost. So, I reported the whirring noise and the wires jutting out of the freezer tray. He blabbered at first and then informed me that the sound might be due to voltage fluctuation if you are not using a stabilizer (we were using one even though the fridge was a stabilizer free operation one, phew) and the wires issue he completely ignored claiming it as normal.So we paid in full for the dirty and scratched replacement door and also had to be called as liars and blamed that we had literally pulled off the door. Also, he was the most unprofessional manager that I had ever spoken to as he closed the conversation with, If it was LG or Samsung, they would never even have come for service like this. Enough was enough... Never in my life would I have anything to do with whirlpool nor will suggest this brand to anybody.They use such low-quality products. The warranty promises are just scam + even the managers are so insulting and bad mannered to the extent that I never want to deal with them anymore. Also, they dont think twice before just blaming the customers for their low-quality products. In all my years so far I have never come across a brand that treat their customers like this.

Bought a Whirlpool refrigerator at Home Depot in 2018. It has been a $3,000 piece of junk!! Customer service is garbage!!! They refuse to address a persistent problem since the day we bought it. Do yourself a favor and buy another brand!!

Just want to pass on update on my dryer situation. Purchased a Whirlpool WGD4900XW1 3/9/13. The motor went out 6/22/15. Now Dec 2016 the replaced motor went out again. Whirlpool says... So sorry, we can get you a discount on a new one... ABT is giving me a break on the part so I am going to go ahead and fix it one more time. I assume in another 18mos I will be looking for a new dryer! DO NOT BUY WHIRLPOOL DRYERS. THEY ARE CRAP!! My brother also purchased a Whirlpool & it died about the same time.

I love the French doors with the ease of seeing everything when you open the doors. The only thing I do not like about this unit is the ice maker. If there is more than one person in the household there is never enough ice. Also the ice gets hung up inside the ice maker often.

I have bought Whirlpool washer (small size) and dryer less than 2 years ago. The washer started to develop an error f6, as it shown. Finally, machine could not work as far as warranty was expired. The Sears technician made very quick overlook and told that probably engine was gone and advised to buy a new machine, as repairing parts are not available in Canada. He charged me 96 dollars for that.

We have had our Whirlpool Cabrio washer for quite a few years. I agree that the machine is a piece of garbage. Every load is unbalanced. You have to stand there when the spin cycle starts, with your finger on the pause button, so you can rebalance the load, which is no easy task. My 80 minute whitest whites cycle took 2 1/2 hours to complete. Thank goodness I started the load at 5:30am. I hate this washer and anytime I am in an appliance store and see someone looking at it, I inform them it is a piece of junk. I havent contacted Whirlpool because I know they wont help with any issues were having.

I had purchased a hot water heater on Saturday and installed it myself. I filled the tank and waited about twenty minutes before turning the power on. I waited a couple of hours before testing the water temperature and it was cold. I checked the temperature setting and it was set at one twenty five, I went to Lowes and informed the service person and was told there was nothing they could do about it, I had to call the number on the tank for Whirlpool. I called the number and was told they could come out to check it but we would be responsible for the labor charges. I didnt understand why because it was under warranty and we had also purchased the extended warranty. I informed my wife so she could deal with Whirlpool because I was going to work. My wife called a number of times and was getting transferred from one person to another and getting no help at all. She was told by one person that it was maybe a problem with the wiring in our home or maybe the plumbing. One person told her that it was not their problem. We had to finally pay an electrician to come out to look at it and had to pay him to replace a heating element. The cost of the electrician and the part came to an extra two seventy five dollars. The only real help that we received was from Lowes managers that were willing to take the water heater back if we could get an authorization number to return the water which Whirlpool claimed they did not have any type of a number. Our 400 dollar water heater turned into an almost 700 dollar water heater. We had also purchased a refrigerator from Lowes that was the Whirlpool brand that quit working after about four months and we had to pay to have it fixed. Needless to say, we will never again purchase any Whirlpool products or recommend them to anyone. The service was very very poor and we are not happy with Whirlpool.

My NEW Machine Top loader HUGE drum. Have problems with clothes not looking like they’ve even been washed, Spun so hard they are twisted all to heck. And white stuff - my oxy powder maybe? Not dissolved. My old machine was a Kenmore 30 yrs old. Thought I’d be able to trust whirlpool but not sure. Am I missing something in the loading process. Seems to read something bout not Covering the knob on the bottom. Is this true?

I bought a Cabrio washer in 2009. I started receiving the infamous F51 code. When I called Whirlpool, they refused to even acknowledge that there is a problem with this washer. When I brought up the pages and pages of complaints about it, they acted like they did not exist. I hope this review will deter people from purchasing one of these faulty products!

Whirlpool Cabrio Washer WTW5000DW - I have owned at least two other washers in my life, and I just recently bought a new washer/dryer set at HHgregg. Was told they are doing away with agitator washing machines in the very near future so this is my first experience with a top load agitator-less washer. This thing is AWFUL!! First of all it took a minute to get used to the weird popping, grinding noises it makes while going through the cycle (which I might add seems to take FOREVER). The other thing I hate about it is there is no way to add the fabric softener at the start of the wash in this model unless you have a downy ball of which I have yet to find at my local dollar store or even the KROGER??? So I run back and forth trying to catch the rinse cycle to STOP the machine (wait I might add) and then add the FS manually.BUT THE ABSOLUTE WORSE THING is - my clothes come out with SPOTS that look like lint all over them, and they wont wipe off unless you have a wet rag to do it with!! AND YES - I have cleaned this washer TWICE already since January with the very expensive AFFRESH. I wear scrubs and they are solid colors, so it really shows up and I have to wipe off every pair EVERY day before I put them on then roll a lint brush down them. WHO HAS TIME FOR THIS??? This is on my SOLID colors which is easy to see, I can only imagine the GUNK that is on the rest of my laundry!!! I dont feel like my laundry is getting clean at all!! I am divorced and money is tight - I paid around $500 buck for this piece of crap. I am already seriously thinking of getting me another one - the OLD tried and true kind with an AGITATOR! And yes I am ANGRY. Can you tell??

I purchased this Whirlpool Cabrio washer three months ago from hhgregg. If I hit the lottery, the first thing Im going to do is take it to the dump and buy a new washer. There is no way to wash a load of towels in this machine. I started a load at 7:35 this morning and it is now 9:53 and Im still dealing with the drain and spin cycles. Over and over, I try to get it to spin out enough water that I can put the towels in the dryer. I should have suspected something when I saw that the washer even had a separate drain and spin cycle. It should have told me something. Its a piece of junk. Never again. Im back to Kenmore.

After almost 10 years, my Whirlpool top loader is now malfunctioning just like a lot of complaints here. It will not complete a wash because it keeps giving an off balance error at the spin cycle. I also had a coin get stuck in the discharge hose but fortunately it did not destroy the pump. I certainly dont want to sink any money into a repair especially because the techs dont seem to know how to fix the off balance problem. Im not much satisfied with my Whirlpool dryer either. It takes forever to dry a load.

A-10 error on display ultimately means needs a new pump. The washer (model WFC7500VW 2) is 3 months, 9 days old and is now unusable. I cannot get any service (under 1-year manufacturers warranty) because the sticker inside the door with the model and serial # is missing (i.e., it was sold to me by Homedepot.com without a serial # on the door label, sticker is intact and is brand new and apparently was printed without a serial #).I made multiple calls to Whirlpool in Benton Harbor, Michigan and finally spoke with Courtney (who states she was a supervisor) pretty much said all they will do is to reprint a label from the factory and I should have it in 7-10 business days. They refuse to stand behind their product and authorize timely repair of their product they sold to my without a serial # on the door tag from the factory. I have to wait to schedule factory warranty repair until I get the new label (probably 3 weeks plus without a usable washer). Courtney refused to contact me via email for any of her contact information or to supply verification of conversation or promise of a new factory label. Also, she refused to try to authorize any type of manufacturers warranty to fix the brand new unusable washer!

Oftentimes when we take out the dark loads there is a white line left. It appears to be detergent that does not go into suspension. We are using HD. Just lately we switch to liquid. Question in our minds is if it does not move the water enough to put the detergent in suspension, how in the world is it even cleaning? I do not see the turnover of the clothes. Where is the quality control with this?

I have received two bad Whirlpool Water Heaters from Lowes. In the course of a few years, I have received two defective heaters (new). One was even a replacement for one several years old that had failed. Lowes insists that you call an 800 number where someone that speaks poor English tells you that you have done something wrong. I am returning the water heater to Lowes, and purchase a water heater elsewhere. This is a perfect example of how sometimes something that is initially cheaper is not the better value.

I love my Whirlpool refrigerator, its great. I have not had any major issues with this brand. I only wish that the freezer was made a little different. Im not a big fan of the side-by-side doors. I would much rather have the one with the freezer at the bottom and the fridge at the top...

My Whirlpool gas range was installed in December 2008. The control panel for the oven has now died for the third time! Push the buttons to set the temperature and nothing happens. The first time the control panel died, Whirlpool replaced the parts. The second time it happened (6 months later), they didnt want to hear from me. The oven worked satisfactorily for about three years and here we are again. It will be about $500 to fix the problem which clearly is not an isolated issue as I have seen this same complaint raised a number of times. Looks like its time for a new gas range. My dilemma is that I have the greatest serviceman who exists... and he only sells and services Whirlpool. But...thanks to Whirlpool, hes probably losing some business.

Reading the many reviews of malfunctioning washers and other appliances, I wonder why organizations like Consumer Affairs and Consumer Reports do NOT help the many cheated customers form a class action lawsuit or boycott or some other means to effectively organize and force manufacturers to return the full cost of purchase, taxes, shipping, moving and repairs for 5 years for every product. The manufacturer have NO consequences for selling shoddy, malfunctioning but terribly expensive products. We are all being taken for fools by the corporations.I was stupidly brand loyal and bought a Whirlpool Duet front-load washer and dryer because we had to leave our perfectly good 28-yr-old Whirlpool washer when we sold our house. The first set of instruction is to pull the electric cord from a small hole in the back of the washer. No amount of pulling would budge the cord. Finally yanked with all my strength, heard a snapping sound and 12 of cord came out. Then no more pulling, yanking or tugging would produce another inch of cord. So I took off the top of the machine and found the cord tightly wedged in the fork of a plastic thing that looked like part of a stabilizer for the drum.A similar plastic thing on the other side was broken at the fork, the snapping sound I heard. Freed the cord with lots of effort, but it was still firmly stuck way down inside. Removed the back of the machine, found the cord stuck inside a circular thing with one tiny opening. Took lots of time and effort to free the cord from that, but it was still stuck. Finally managed to reach the plug, which was firmly anchored to the bottom of the frame with an orange lanyard. Cut the lanyard with a knife to finally free the cord. This had to be an act of sabotage by an assembly worker, as no way could the cord accidentally jam itself into 3 different places too small for the cord to slip in, and it certainly didnt tie itself to the bottom of the frame with a lanyard.The hour it took to free the cord was just the start of troubles with this machine. It did start and kind of tumbled clothes in an odd fashion, but when it went into spin cycle, it literally jumped all around the room, almost jumping out the door. The whole house shook and I feared the floor would collapse. That machine must weigh well over 100 lbs. even without water and clothes. Next load I tried delicate cycle which had a slow spin cycle.Same result, even worse. I had to wedge my body in the 10 space between washer and dryer and press down with all my 170 lbs. to keep the machine from doing serious damage to the dryer, walls and floor. I contacted seller, Lowes, and they said call Whirlpool. So I did, but no response. Before buying that machine, I read many horrible reviews of Whirlpool Duet machines, but I have only owned 2 washers since 1967, both Whirlpools, so I had strong but stupid brand loyalty.

My wife and I purchased a new Whirlpool gas range (Model#WEG745H0FS0) almost 2 years ago. Woke up one night to the smell of heat and the oven had come on! Thank God we were home. Very dangerous! Repair is going to be expensive! Havent used the oven portion in about 3 months now. And Thanksgiving is just around the corner! Any assistance is greatly appreciated.

My Whirlpool is reliable, however it does not have a soaking cycle which I would enjoy having. It also has an unbalancing problem when speeding if I attempt to wash heavy loads on the extra large load cycle. However, it responds very well on large loads for heavy washing. Shortly after I got it the timing had to be replaced, but no problems since then. Overall pound for pound for the dollar it is a good machine.

2007 we purchase a Whirlpool Casio washing machine. Rusted out in three years. 2008 we purchase Whirlpool gold dishwasher. In two years the front panel rusted out. We replaced this panel and now the second one has rusted out. According to Whirlpool they do not cover rust. When we replace the washer it was with a Samsung. NO SIGNS OR RUST IN THE LAST THREE YEARS. When we replace the dishwasher it will not be a Whirlpool. As far as I am concerned, Whirlpool products are junk.

I purchased a Whirlpool washing machine (model: AW01D8810 S silver color) and a Whirlpool refrigerator (model: WBM329 TI) together from United Arab Emirates for Dhs 1999/- & Dhs 1199 /- respectively on 28 Jan. 2011. I sent this machine to my hometown (India) in the same packing and I used the washing machine only for three months and found a complaint. I informed this to service center in Trivandrum, Kerala. Their team came to my home and told me that warranty cannot be given as I purchased machine overseas. They added that the PCB for the machine is having complaint and they dont have stock in India. Also, the machine is no longer available in the factory. The Whirlpool company completely stopped manufacturing the abovementioned model. Again, I came to UAE and contacted GEC group of companies for the PCB part. I got a quotation for PCB Dhs 425/- but the items is ex-stock with them. The machine cost only Dhs 1999/- and if I spend Dh425/- only for PCB, and the machine is with me for the parts since one and half years. I dont know what to do. If I spend another Dhs 600 + this PCB cost then Id rather go for another new branded washing machine. The model of machine is AWO1D8810S and serial no. is 12 nc 859247463000 003. Please advise what to do or if I can find the PCB in Kerala. What will be the cost? I am ready to pay the money for PCB but not for the above rates. Please advise, sir.

I bought a Whirlpool refrigerator from Home Depot. It didn work. I had to wait for a week to get a new fridge.. I also bought the 5 year warranty -- its not worth the ink its written with. MAYTAG DOES NOT ANY CUSTOMER SERVICE. THEY DONT KNOW A THING ABOUT CUSTOMER SERVICE.

Its very noisy, and there are no blankets to purchase to deaden the noise. The dishes all need to be dried by hand. Some of the dishes come out dirty. I would never purchase another Whirlpool dishwasher.

The double oven is the best! Doesn’t heat up the house like the older stoves! Very easy to clean. The range is all one level, so it is at easy to set your pit anywhere. Also the middle burner is amazing for a griddle!!

Purchased a Whirlpool Cabrio Washer 5 years ago because our other washer died after coming home from vacation. Its just 2 people in this household so I dont do mountains of laundry. The other machine lasted 15 years so go figure. We purchased the Cabrio from Lowes. Got the extended warranty but as it goes the machine fails when all warranties expires. Over the last couple of weeks this machine started to not complete a wash cycle. All lights go off except for spin light and machine stops. Even asked the person in charge of washers and dryers at Lowes about this who then told me to get an extension cord and plug it into a different outlet. Seriously! I have had to unplug the machine after it fails to complete cycle, wait 5 minutes or so, plug it back in, select rinse and spin, it fails again 13 minutes left in cycle, unplug again, plug it back in, select drain and spin, wait for it to MAYBE complete that cycle. Do not purchase this type of machine. Just for a technician to come look at it is $100 or more and to replace whatever circuit board is probably another $300 or more. Screw that! Going to find a good old fashion one if possible. Piece of junk. Not going to spend $700 or $1000 just to wash clothes for 2 people.

From the day I bought the refrigerator the icemaker has not worked. I have had a estimation of service calls (8) and nobody seems to be able to fix it. Whirlpool mailed me a new icemaker and still the exact problem; water and ice works but the unit still will not cube or crush ice; which by the way is the reason I bought a new refrigerator. My thoughts are I bought a lemon and the entire fridge needs to be replaced.

As described in many similar instances found on numerous complaint boards (including this one), Whirlpool has defective over the range microwave convection ovens (model # GMH6185XVS) with faulty magnatrons. I have had the exact same experience with a new product failing at 16 months (the first time) and within 6 months failing again. Whirlpool is not concerned about their consumers, only their money. They are more than happy to sell an extended warranty, but are not willing to work with customers that have lemon products.I tried working with Whirlpool customer support with little assistance other than to offer to sell me a $250 extended warranty. I additionally filed a complaint with the Better Business Bureau concerning Whirlpool to include over 10 pages in documentation with numerous people reporting this same complaint. Whirlpool is still not willing to acknowledge they have faulty or defective components in their product and so generously offered to pay for the replacement component (only - not the service to repair it).I spent $600 on this unit new, $163 to repair it the first time (at 16 months old) and no doubt it will cost me an additional $163 to repair it again (not even 6 months after the first repair). I am not willing to continue to throw good money after bad on a defective unit. For the cost of the repairs and their extended warranty, it is cheaper to buy a new unit from a different manufacturer.It is clear from this site (in addition to numerous others) that Whirlpool has a definite quality problem - both in products and service!

This is the worst washer/dryer I have ever had. It is so damn loud that the neighbors can hear it. Water level is too low. Today the dial is making a buzzing sound. I have to re-rinse the clothes. It does not spin enough, have to re-spin again. What kind of energy saver is this, NONE. They said thats the way the machine is, loud, thats bull. No machine should be like that. I threw money away when I bought that piece of (you know what). Dont buy this machine. Consumer Affairs, you should pursue this product with Whirlpool and have them do something about it. They do absolutely NOTHING.

Everything comes out clean and it doesn’t cause items to be tangled around each other. It has a setting for every possible type of load. I especially like the option of having “deep water”. Not having a “glass” lid is a plus.

We purchased a WRF989SDAM03 model French door refrigerator in September. A month later it began to make grinding noises when running. The noises got louder until it sounded like a car idling. We called for service, and the technician diagnosed a failing compressor. They replaced the compressor with some difficulty. Three days later we lost cooling. They replaced the compressor again. Now the refrigerator cools, but it runs 100% of the time. I dont mean frequently, I mean it NEVER. SHUTS. OFF. Its never not running. Today a technician came out, and after 1.5 hrs of diagnostics on the phone with a Whirlpool engineer, theyve declared that it works. Whirlpool refuses to honor their warranty and says that because the unit cools, I should accept that it runs 100% of the time. I can get no resolution from Whirlpool.

Bought new. About 3 years old. Been repaired 2 times. Will run about 10 minutes, drain, and stop. Does not clean dishes. Model #du1015 xt xs2 Whirlpool Quiet Partner 1. Never will buy Whirlpool again.

WHIRLPOOL WASHER FOR SALE! Your clothes will come out just a bit dirty, but thats OK isnt it? (You can see for yourself.) Oh yeah the Smell. OMG, its a heavenly Wet Dog smell. I know youll be as happy as I am with this WHIRLPOOL CABRIO WASHER. I almost forgot to mention, that most clothes will come out dry (not because of the high power spinning cycle) so youll save on your power bill, since you’re not using the dryer... This is a must have WHIRLPOOL CABRIO WASHER - NEW, ENERGY EFFICIENT. Youll use little to no water, another savings! But youll spend a wee bit more for the HE detergent, sorry! Oh yeah I forgot to mention its still under WHIRLPOOL 1 YEAR WARRANTY. Youll BE GLAD YOU PURCHASED THIS WONDERFUL MACHINE... Just as I am! :-)Back ground & Information about problems: A) We purchased the Cabrio Model# WTW5840BW0 washer 8 months ago and it has been nothing but trouble. And yes Im very busy in the summer - always on the go with school, kids, vacation, homework, finals, and work, etc. For the past 2.5 months. Started off by not spinning out, first problem. Does not fill up on deep washer cycle. Clothes come out as dirty as when I put them in. I have pictures. Some clothes never get wet; no water touches them (Small/Large loads). Now whites are coming out with yellow blotches on them. The clothes smell like Wet Dog - yes wet dog. Ive used the Powerball cleaner three times in 8 months. Yes, a service man has been out. He recalibrated everything. Now it’s worse. He is/has ordered ALL new computer parts, and I do mean ALL. If you need to replace every computer part on a brand new machine, I feel as if this alone, is a red flag… Wouldnt you agree?Im not happy with your Whirlpool Cabrio Washer and no longer want this washer. Maybe a different one, but not this one! It has been nothing but a headache. What can be done? Ive called Whirlpool USA 4-5 time being on endless hold @ the 800-253-1301 number and finally today is the first time talking to a rep. The young man was nice; however Im still no closer to getting this machine fixed today! Ugh. I would not recommend the CABRIO WASHER to anyone at this point. You can understand, cant you? B) Sad ;-( I had to tell my husband he was right and I was wrong about the new washer, and not to mention the smell he has been complaining about. Yuck...Explanation: I had washed towels in the new WHIRLPOOL and did not get around to folding them. Then after washing last night outside (yes outside) in the ole GE. I was folding the towels and happened to pick up the first set washed (Whirlpool); put them to my face and sniffed, yuck! WET DOG came to mind. Then sniffed the ones washed in the GE and he was right. I was wrong! Ugh... A $800+ Whirlpool is in the laundry room yet, Im outside on the deck - again yes Im hanging out with the mosquitoes on our deck washing clothes with the good ole GE. (It’s outside because it need a shutoff switch, or something like that.) Lesson learned the expensive way, dont buy a computerized Whirlpool washer. Its money down the drain... Needless to say Im not happy at all with this product.

In June of 2010, I purchased a new Whirlpool Estate EED4400WQ0 dryer (serial number M01156261) with an accompanying washing machine. It has been in a clean, climate-controlled environment and gently used by my family of four for just short of two years. Last week, I began to notice that the clothes coming out of the dryer were cool and damp and it quickly became apparent that the dryer was only heating intermittently. This morning, the service person from the dealer who sold me the washer and dryer set (and a Whirlpool dishwasher a few months later) told me that contacts on the timer unit were bad and that the entire switch would have to be replaced. This is no small portion of the machine and the part alone will cost me about $150. After labor, we are looking at an expense of approximately half of the original cost of the machine - in less than two years. I called the Whirlpool’s customer service line to ask if there was anything that could be done and the answer was: Sorry, we cant do anything for you.” It is not acceptable to me for an appliance to become that expensive that fast. If Whirlpool cant do anything for me about this, then I will not be purchasing anymore Whirlpool products.

So, I have a house full of relatives from out of town staying over and as luck would have it, my Whirlpool water heater (model # BFG1F4033T3NOV) which I had installed 15 months ago, decided to stop working. The pilot light went out and would not stay lit no matter how long I held the red restart button. I called Whirlpool customer service and was informed straight away that their computer system was down and they wouldnt be able to order parts if I needed them (great start right?). I explained to the woman on the phone what my issue was and also told her that after searching online, Ive found that this is a common failure with these hot water heaters that Lowes sells where the thermal couple is defective and needs to be replaced. She began to inform me that before any parts was ordered (which she couldnt do because the computers were down), I would have to clean the vent openings on the bottom of the HW heater. No big deal. Then, Id have to have my gas line pressure verified by my gas company (what?). If both were found to be fine, Id have to confirm that my flue is at least three feet above my roof line before they would send me parts to repair my unit. This is about where I lost my mind.I run the RMA/Customer service department in my company and if anyone has issues with our products, we ship first and ask questions later. How can a company with known defective products give their customers the runaround and basically tell them that they are screwed until they can take off time from work for a gas co. to come to their home and will also have to have flue replaced before theyll warranty their product?! Whirlpool should be ashamed of themselves and Lowes should distance themselves from such a crappy company with substandard products and shoddy warranty practices. Ill never buy another Whirlpool product as long as I live and will warn anyone away from this company.