In my wildest dreams I wouldnt have expected that changing a burned out light bulb on a 7 month old microwave would put us out of commission for over a month. Its been 30 days now and Im told it will be more than 2 weeks before the part comes back in stock. Whirlpool had such a good reputation years ago, but thats history. This is a disgrace.

The Whirlpool Quiet Partner II is a horrible dishwasher and should have never made it to a store to be sold. We have had the dishwasher for 4 years and about 6 months ago it started shutting off minutes after it was started. We would have to press the Cancel Button and try it again several more times prior to it finally completing the wash. After contacting our home warranty for help the tech said it is not worth fixing and will only give us a SMALL amount towards a new dishwasher.

I just purchased a new Whirlpool 6th Sense hot water tank #333570. This unit is a piece of garbage. Whirlpool should be ashamed at the quality of product they make. This unit came with a bent temperature and pressure relief valve, which required a piece of copper tubing to be bent awkwardly just to remedy the situation. Also, the control box is set at 12 (most other brands are 14, which is common), forcing the gas lines to be re-piped (very expensive). This unit also is extremely noisy, runs really, really hot and is not energy-efficient at all. Shame on me for not researching this product more closely. If youre buying a new hot water tank, steer clear of Whirlpool products.

I purchased this machine in February 2019. The standard one-year warranty covered the first service call less than one year later. This call was related to the main control board. If this part goes out it will prevent the washer from advancing through the cycles. A technician was able correct this problem by resetting control board. That was sometime the first year. The next call was for the same problem and it cost me $90 to have a technician reset the board again. I then learned how to do it myself through online research. However, I had to do it more regularly and this got old as you can imagine. I did buy myself about two months of time by purchasing a used part but it soon failed as well. This main control board cost $564 if you get it from the manufacturer. This exceeds the cost of the machine. It was purchased in 2019. (The same machine has gone up to $740 today.) I had no other problems with that appliance however, it appears nowadays with electronics taking over cycles vs. mechanical parts you will not enjoy the same longevity as I did when I got 16 years out of a GE washer before this one. I have replaced this machine with a competitors product that costs less than the part except for the 5-year warranty from Lowes.

I felt compelled to write this review, to sum it up NEVER buy ANY Whirlpool, KitchenAid etc brand. Nothing but the worst experience, it all started with a 5 year old Whirlpool fridge that stopped cooling, I called and they said they could send someone for like 200$ and that it does not guarantee it will be fixed. So I called an independent and he tried to refill the freon, but it was leaking behind the fridge in a section you cannot access because they want you to buy another one, so 5 year old fridge in the garbage and now to top it off, a KitchenAid knife set that is barely used, one of the big knives broke cutting a fruit, and good luck in any circumstance getting any customer service. SO NEVER AGAIN, TRUST ME AND PUT YOUR MONEY ELSEWHERE ON ANY OTHER COMPANY.

Top load stackable Washer dryer - Model number YWET 3300XQO. I had two floods with the same washer dryer unit. The first flood occurred in April 2012 and thousands of dollars were paid to repair the home that was damaged due to this flooding. The second flooding happened in October 2012 with the same machine at the same home. This time there were other Whirlpool owners that also suffered with the same issue with the same model Whirlpool machine. Whirlpool acknowledged that they will pay out to fix the damages and the deductibles but to date they are simply playing games on paying out. This is 15 months after the first flooding happened.

My Gold Series Whirlpool Electric Range is 3 years old. The main board for driving the burners, oven, etc burned up which caused my oven to go from the 200 degree setting to 450 in about 3 minutes burning everything that was in the oven. They want $400.00 + installation to replace it and that is if one can be found to actually install. The stove was purchased for $850.00 because of the Brand and now they want half that value to replace a board that will likely fry again in a year or two. I find there is no value for money and will not ever buy a Whirlpool brand again.

We have also had many problems with 3 year old convection oven. After about 2 months the broiler would just come on in the bake mode. I called Whirlpool about this problem and they were a bit ignorant on the matter. They said they could arrange a service call, but if they did not find the same problem mentioned that I could be charged a service call, even though it is under warranty. I denied at the time and the problem did not happen again for about another 1-1/2 years or so. In the last few months it has happened a number of times and the one time my wife leaves the room, the potpie burns up. She also lost a pan of brownies. Now we make sure that someone is in the kitchen when the oven is in use. Today the broiler comes on while pre-heating and for the 1st time we receive a message TURN OFF POWER TO RESET in which I did thru the breaker. It took forever to cool down, then she is going to try again. I also am going to contact Whirlpool and see what they have to say. Last I checked there was no recall for this model (#GFE461LVS), but there should be after reading all of the complaints or they are bound to have a lawsuit on their hands or maybe even a class action lawsuit.

I purchased a Whirlpool refrigerator with an ice maker exactly 2 years ago. It stopped making ice. I called a Whirlpool repairman and he said there was a leak in the freon tube. I should get a new one. I did, am trying a basic GE with icemaker.

I had kenmore in long term until we decided to change the brand Whirlpool. We just saw want to updates to change the color. It was good price on special day. I have no problem with the stove. I like there is size of pots from small to large pot of size.

We bought a Whirlpool range with glass cooktop and convection oven to replace a 20 year old stove which had served us reliably but was beginning to look a bit dated and worse for the wear. The new range was installed in February, less than 2 months ago. Today, while I was preparing Easter dinner and had a ham in the oven, the cooktop elements refused to heat, even though the cooktop on light was lit up. We followed all the troubleshooting tips we could find in the user manual and online, but nothing worked. We decided to do the rest of the meal in the microwave and just finish the ham in the oven (which had been working). Then the oven failed, and would not heat back up.As a last resort, we pulled the range out and unplugged it, to perform a hard reset of the electronics. (This was recommended in some of the online troubleshooting tips.) No joy. Both the oven and cooktop elements will not heat, even though the lights on the control panel light up. Now we have to call a service technician to come fix it in the middle of a pandemic. How can a brand new and expensive range be less reliable and less useful than the cheap 20 year old stove we just got rid of?

When you shell out the money for a new water heater you expect it to work the first time. Mine did not. Luke warm water was all that we could achieve. After going through the troubleshooting steps we could not clearly define the problem. So they ordered me the parts and sent them to me. The parts were for the old model control unit and does not mate up with the wiring that is in the unit. The representative was put back in that they had no idea how that happened. And, no wrench came with the thermostat just another thing to spend money on. I told them I have had it. Then they say that this is a manufacturers defect and they can provide me with a list of repair technicians in the area. I gave them one star because I could not give them zero. They should have lead off with the service technician. Still not repaired. I will keep you updated.

Whirlpool Auto Load Sensing - I bought the washer in Aug 2010 and it worked well until the timer went out this year. Its only 4 years old! The repairman said it would cost $350 to fix - the machine cost me $469 to begin with! Whirlpool builds a poor quality product and Id advise people not to buy their brand of anything.

I dont like the sensing feature that takes away my choice of water level control. I dont like the locking lid. It doesnt clean the heavily soiled clothes and I have to wash them twice because of the low water level. When the water is running in during the spin cycle, after the rinse cycle it washes away all the fabric softener. It takes longer from start to finish, so I dont see how it could be energy efficient. I dont like anything about the so-called energy efficient models. My opinion is they should not have changed from the old model. If it is not broken, dont try to fix it! I will never buy another Whirlpool product unless I see some significant improvements.

I bought a Whirlpool French door, freezer drawer on bottom at Lowes 2 years ago for $2,600. The refrigerator needed a new motherboard within the first year and now that it is in the 2nd year, service is required again. The repairman ordered the part and came the 2nd time to replace the part upon receipt. Now it needs the 3rd part since it is still not working. I have a herniated disc in my neck and had to remove everything from the refrigerator and freezer to take downstairs to salvage our food. Now I have to go through the same thing again for the 3rd time after the additional part comes. This refrigerator is junk. I asked Lowes for a new replacement but of course was denied. Does anyone know a good lawyer for this type of situation? I never had a problem with an appliance like this.

WTW8000BW0 washer - This is the worst washer I have ever brought. We bought a pair washer and dryer. The washer started making noise when it was in spin cycle so we called repairman. He came and said it would be better if got rid of it and bought something else. Said it would cost too much to fix and hes seen too many of these. The noise is so loud we close door on laundry room and we cant hear TV in front room. This is the worse junk we have ever brought. Whirlpool should be accountable for this.

My fridge stainless steel doors rusted on after Whirlpool Customer Service told me to buy and use Affresh (a Whirlpool product) to clean them! The fridge was only 12 days old when this occurred, imagine my shock and disappointment. Whirlpool Customer Service reps then sent me another one of their products Whirlpool Stainless Steel Brightener with instructions to clean it every day for 3 weeks and it would resolve the rust problem. It didnt resolve the rust problem. 2 repairmen from different companies have looked at the doors and shook their heads that Whirlpools own Customer Service department recommended a product for a fridge that rusted it and then they take no responsibility for it! Whirlpool knows these stainless steel fridges have the potential to rust. Its listed in their manual. Unfortunately, buyers arent given a copy of that manual to peruse BEFORE they buy the product. I would never have purchased this Whirlpool fridge had I seen that! I have now since read of other Whirlpool stainless steel fridges rusting.

I bought a NEW Whirlpool 40 gallon, natural gas hot water heater from Lowes in May 2012. January 04, 2014, the main electronics failed that controlled everything. It has a 9-year warranty (after 1 yr.- parts only). What failed was the Gas Control/thermostat unit, and it takes a HVAC-trained person to replace it. Yes, theyd send the part - free, but required me to pay for installation. Talking with an HVAC business owner, he said hes replaced about 30 of these and he surmised that Whirlpool KNOWS that nationwide, over 10,000 needed replacement yet Whirlpool cares less. Ive had trouble with other Whirlpool products, so when my appliances, etc. go bad, I will NOT replace with Whirlpool products.

I purchased a Whirlpool Cabrio Washer in May of 2009. I do laundry for only 3 adults, so I never run more than 3-4 loads a week. It constantly is off-balance when spinning and requires positioning the load again several times before it will continue its cycle. Now 5 to 8 minutes into it filling with water, it stops filling and beeps, and code F shows up on the screen. Also, during the spin cycles, it is very loud and fast. It sounds like it is about to take off anytime. I called customer service to no avail. They just wanted me to schedule a repairman to come out and fix it at my expense. Now, I know why they only give a one-year warranty - they know it will last one year but not much longer. Im from a generation of people that is used to appliances lasting 10 - 14 years and the company stood behind their products and didnt ask you to buy an expensive extended warranty for the 2nd year and so on. If inferior products were not manufactured, there would be no need for an extended warranty. Anyway, Im not going to put any money (I was quoted a $129 charge by Whirlpools service department just for the diagnosis of the problem which didnt include the labor or parts costs.) into a washer that will probably continue to have problems and become a money pit. Consequently, I will never buy nor recommend anyone buy Whirlpool appliances. It would get quite expensive buying a new washer every 3 years or buying the extended warranty plan. The matching dryer had no major problems, but a couple of years ago, I had to have the door changed from opening from right to left to opening from left to right because the door catch broke on the right side. Hopefully, nothing else will go wrong with it in the near future.

Good News!! Finally a permanent fix & possible recall. My Whirlpool Gold bottom freezer was 18 months old and Out of Warranty. It leaked water on my floor like all the rest. I called and was told I had to pay the service charge. Speak with a SUPERVISOR!!! They sent a repairman who said a Kit had just come out to fix this. I had to defrost the unit for a day and he returned with the kit. Part number is W10309238. The repairman believes they will be doing a recall and fix these drains. Insist on speaking with a Supervisor!!! Get results, they will do it as it is a design flaw. The repair took about twenty minutes. Here in Ottawa, Ontario call Youngs Appliance for more info.

Whirlpool Cabrio - We bought this washer in June 2013. The gearbox just went out (17 Nov 2015). Terrible product. We had to buy a new washer; and it wasnt a Whirlpool.

The ice maker freezes up at least once a week. It requires removing the bin and chiseling the ice away. We have had repair here twice, and it still happens all the time.

My comments are similar to all the other comments on here regarding the Whirlpool Cabrio washer: I bought a Whirlpool Cabrio 5 years ago and have been sorry every wash day since. I have to wash my clothes twice because the machine doesnt fill the tub with enough water to get the clothes clean. I have tried using the bulky setting for all loads to try to get the water level high enough to at least cover the clothes. This is a terrible design and the worst piece of junk. I will never buy a Whirlpool product again...

First the ice maker stopped making ice and then the freezer stopped freezing. The unit is 2 1/2 years old. Whirlpool wants $1800 to repair! No Way. Purchased a Samsung and hope I do better with this one. So little to be praised about this American brand.

I took the Sears salesmans suggestion and bought a high-end quiet dishwasher. It worked wonderfully until it sprung a major leak. Computer told me the phone # to call. It took a week for the Sears repairman to come out and $79 fee to just look at it. He said the fitting between the sump and the pump came off and flooded water over the electric motor. Electric motor is shot! Cost to repair is over $400 and a 3-week wait!!! When and if a new motor is installed, only then do we know if the computer is also fried. This was a high-end dishwasher. Factory warranty just ran out. Repairman said this is a common problem with this model. DO NOT BUY THIS MODEL.

I bought a commercial coin operator washer (Whirlpool washer model CAE2743BQ) for $800 and after using it for 4 months the washer stop working. The main board panel lights turned all and the washer did not start. Called Whirlpool several times and nobody could help me and told me to look online for a distribution center to get parts. The customer service only knew about regular washers not coin operator. The washer had only 3 months warranty from Home Depot and I was supposed to pay for all the repairs and Whirlpool would pay for parts. So far I spend $400 in repairs and the certified technicians could not repair the washer. They replaced the actuator shift, the main board etc, etc and nothing. The technicians reset the washer at least 10 times, calling Whirlpool tech support and the washer worked for one load and the main board lights stayed on all over again, the start button did not work. I sent a letter to the warranty department that I got online and they told me to call the same 1800 that I had called at least 50 times in the past year. Now it has been more than one year and the machine is defective. Technician said could be the soap that my tenants are using, or overloading the washer or an electric problem that they cannot identify. I gave up... I will not buy a coin operator heavy duty washer from them again. I requested a return authorization for a defective product and I did not get anywhere. Thanks.

We purchased a Whirlpool conquest from Lowes in 2009 and purchased a Lowes warranty. About 2 years ago we started seeing hairline cracks on most of the drawers and shelves. I complained about it last year and a lady from the Facebook page did offer 50% off new ones. Since then we have not been able to afford to get any, and today we lost our last shelf. If I wouldnt have checked it, it would have broke along with anything on the shelf. I have never seen such horrible parts. We have another small very old fridge that has help up better than this. At this point I will never buy another Whirlpool.

Two and 1/2 years prior we bought a new whirlpool range - W10201511 WHT. After one year we had to replace a computer module at the cost of $500.00. One year later we encountered the same problem. Today we went and bought a new Kenmore stove rather than keep putting good money after a bad Whirlpool product. Very disappointing.

Since there is only two people in this home, we decided to go for the smaller front-loading machine. This was purchased in 2012, still running. It does a clean wash, however common sense does remind people to not over-load a front load washer. If one follows directions, it gets the job done, and ones machine lasts longer without problems. Thanks.

My oven was a lemon from day one. The light bulb would not light, the oven would not come on. Had the repairman in cause it was under warranty, he replaced the gas valve. A month later the same thing happened, the oven did not light. Have been putting up with this for a little over a year, it is finally off warranty. Same thing happens, you go to cook something and it will not light, then the oven door broke! We had to pay to have a new hinge installed. Whoever heard of a oven door breaking? I have had ovens 40 years old and they still work and the door doesnt break. Needless to say, my oven is still doing the same thing, lights sometimes and other times does not. Called Whirlpool several times, they are nasty and wont stand behind anything. Customer service says there is no lemon law for stoves. I will not ever buy another Whirlpool anything and that is not a threat but a PROMISE.

We purchased the Whirlpool Duet Sport matching washer and dryer new in 2006 from a local appliance store. The washer was around $1,000. The salesman sold us on the load capacity, telling us it can wash 15 pairs of jeans. We dont overload it, mostly because its a high-efficiency washer and doesnt use much water (Im still trying to figure out the concept of how can you clean a whole load of laundry with a little bit of water). Its very quiet, but the cycles take longer than standard washers.Also, you must use very little soap (too much soap will cause the washer to stop and display an error code, which youll have to call a technician to come and reset). It is now 2013, and the washer started thumping during a cycle and there was a burning rubber smell. We called an appliance repairman who gave us an estimate for repair of $800 to $900 (for a bad bearing/bearing casing and inner basket). Im sure that there was quite a markup on those parts! It seems to me that the older non-efficient washers lasted longer than 7 years, and certainly didnt cost $1,000 when new.

I purchased Whirlpool 6.2ct electric range on 3/16/2013 from Lowes, Fremont, CA. I tried to bake my cake on 11/19/2013, and preheat it to 400F degree. When the temperature achieved to 400 degree, I put my cake in not even 5 minutes and go to dining room to pick up something. When I turn around, I saw the oven window is so bright and I open the door right away, it has fire from the left side bottom. I turn off the power right away but still has big fire. So I use the fire extinguisher to get the fire off.I went to Lowes to complain, this product is still under the manufacture warranty and I also purchased two years extended warranty from the store. Lowes sent the 3rd party technician over to check, they open the bottom element and insist I drop something to catch on fire. He tried 350F degree is working. But the fact is, theres nothing dropped, no oil, water or and any ingredients, only fire extinguisher powder all over the bottom. Technician put back the cover, I asked him, How do I clean up the bottom extinguisher mess? He said, You dont need to, just clean the top, and wont try 400F degree for me since the top didnt clean up. I asked him, I am so fear to use it now, you asked me to clean it up and try again. I only use my oven to bake cakes, cookies, and muffins, and that day the cake even not still raise yet. How could it catch on fire? Is this product defective? I doubt it.I also called Whirlpool, they said most likely its short circuit. They only provide the repair, unless it cant be repaired, then they replace it. Manufacturer also told me that my temperature is high. I dont think so. I have no problem to use any oven in 425-450 in the past. If this is high, why your stove has function to that high degree? I am so upset with both services. From my concern, nothing dropped to bottom and caught on fire. They all refused to replace the new one and asked me to continue using it. I really dont feel confident to use this one and dont know who can help me to replace it.

lD and UL codes are displaying. The UL code displays when the load is even and also displays UL load when I take all clothes out of washer. How could the load be uneven if there are no clothes in? I have had four different issues with this washer. I have started use on this washer in Aug. 2008 and there have been already three major repairs. I am a very dissatisfied customer. I dont know if I should spend more money on washer repairs or just buy a new washer. Please help.

This machine, like all other water sensor machines, will not let you wash a few items that are lightweight without filling the whole machine up almost all the way. The reason being is that if the items are light, they will float in the water above the water level and the sensor thinks it needs to put more water in and even with putting something in to weigh it down like a wet towel doesnt always work, nor should you have to do this. You will waste more water in the long run if you only have a few items to wash, ie baby clothes, underwear, rags, etc. I am so disappointed that I had no other choice but to get this machine.

We bought a new Whirlpool gold gas stove. We had just finished redoing our complete kitchen, and thought it would be nice to replace appliances. I thought Whirlpool had a reputable name and good service record, but clearly, I should have checked. Three months after installing the stove, the handle pulled right off the door. We called the service tech who came in, took the door apart, and replaced the handle, but for some reason, installed different and incorrect screws for the door. Over the next 7 or 8 months, the handle pulled off twice more, and we repeated the cycle. At this point in time, we had been experiencing a situation where the stove would shut itself off. Bear in mind, it is less than 18 months old. Even now, the oven heats, and mid way through cooking anything, it decides to shut itself off. Clearly, there are issues with Whirlpool products, and when I called them, they want to do nothing about it. They jockey me around, from one service person to the next, frustrating me as I have to retell the issues to each new individual, and then they only tell me a replaced board, which would cost more than $600, is the way to go. Ive had this stove for 2 years, and it is seriously the biggest piece of garbage anyone ever put out on the market. Apparently there are no recalls on it, and so apparently, Whirlpool is more interested in ripping off their customers, than standing behind their product. I am currently seeking permission in a local paper to write a public service piece. I hope people will read it, and avoid this company at all costs. I hope whirlpool enjoys it. I dont know how they have turned a blind eye to all these complaints. As far as what I have read, with regards to other whirlpool problems, exploding glass, dangerous fumes, etc. They should be investigated, because what they are pulling off is criminal. If I want someone to steal from me, Ill leave my doors open, and let them come take me for what I have. I dont need to support a company that is stealing from me, while they wear smile on their face.

My double ovens were locked and I could not open them. A repair man came, undid the latch, but did not have the replacement part. He ordered it and came back two weeks later to replace the latch. I paid the required $159.00 for the service call. In the meantime, I could use the bottom oven without any problem. He replaced the latch and discovered it was defective. In removing it, he damaged the ribbon in the control panel. He came back and put in a new latch, but now neither of the ovens would work because the control panel was inoperative. An attempt was made to order the control panel, but the control panel is no longer made. Instead, an attempt was made to repair the control panel. This took 4 weeks, and meant that I did not have an oven for Thanksgiving and had to totally rearrange my plans. Now I am told that the panel is not fixable and the best they can do is offer me a prorate on a new oven in which I would be charged $1374.00. I find this outrageous. Except for the latch, an easily repaired mechanical problem, the ovens were in excellent working order. Now I am being told that due to the problem caused by their repair person, I must pay $1374.00. I spoke to Stephen **, their customer service supervisor, who said that I have no further recourse with the company and there is no one else I can speak to regarding this problem.

Model WTW4850OXQO. Purchased this washer in Nov. 2011. Two months ago the washer began making a loud grinding noise in the wash cycle, so loud it can be heard throughout the house. Called the dealer whose serviceman said it was the gearbox and it would need to be replaced. Cost of the gearbox $235.00 plus $165.00 service. Called Whirlpool in TN and was told that I didnt purchase their 1 yr warranty. What the hell is a 1 year warranty but me paying Whirlpool to fix their defective piece of crap in case it breaks in the 1st year. I owned a Kenmore that lasted 11 years, an RCA that lasted 12 years, and a Maytag that lasted 10 years. Never a problem til they died of old age. This piece of ** is breaking down after 3 1/2 years. NEVER buy Whirlpool! Also, the inside of the machine SMELLS. My wife has to use bleach or cleanser to get the smell out. Once again a company in the USA thats too big to care about its customers!

Bought a Whirlpool refrigerator from Best Buy a yr 1/2 ago. Went wrong from delivery and never stopped! There isnt enough room here to specify so Ill try to synopsis this. They screwed up delivery date and then time. Fridge was unbalanced, doors wouldnt close delivery guys didnt know what to do. Tried to fix it and then call their office and were put on hold for over 30 mins. And the Rep was unhelpful and rude to me and then the delivery guys finally got door shut on freezer but Ice maker wouldnt work so they said they would have to have someone Whirlpool to fix it after them talking and being on hold again with their Rep. They were upset and late and felt sorry for me and told me Confidentially That this was not uncommon and they would do what they could to help me.It took many calls, people and conversations (subsequently I found dents, drawers cracked, cracks in back wall) for them to get someone here. When they did the guy was rude and acted like a pre-programmed robot. He said, Show me whats wrong and I did. He stood there and just stared at me and said, I dont see anything wrong. I was shocked! I said, You mean thats supposed to shower the kitchen with crushed ice, etc? He said YES! I said, Ok, please leave my home. I will contact Whirlpool and Best Buy Again. I did and it went on and on and on and to this day theyve done nothing. I have copious notes, dates, names etc. I have also heard many other complaints about both companies and will never do business with either again and will tell anyone and everyone I meet.

Whirlpool cabrio top loader is junk from the first month. My washer has had way too many repairs. A&E repair has been a frequent at my home. Now Im getting ready to repair it again! Hub gasket or pump not sure this time. All has been replaced previously. Never ending - always something wrong with it!!!

I purchased a Whirlpool cabrio mod. wtw5840bwo washing machine in Oct. of 2014. As of June 2015 I am ready to kick it to the curb. The washer works to it design and hasnt broke down but it doesnt clean our clothes. We load the machine, add the right amount of clothes and recommended detergents and 1hr later after the wash cycle is completed, the clothes still stink with the smell of daily perspiration. I went back to using our old washer that has a worn out agitator. It does a better job.

Whirlpool Cabrio washer - Its very expensive and it quit after 3 years. Repairman said computer component went out and it would cost $450-$520 to repair and it wasnt worth it. He also told me I should have read reviews first. Whirlpool said I should have bought extended warranty. No more Whirlpool appliances will be bought for our homes or business.

Bought this new in Oct 2012. A week back stopped working. After a week found out it needs new compressor and will cost 1,096.00. Paid 2,100 for this new and now need to buy another fridge but not this make.

On the 27th March 2012 I bought a new Whirlpool 6th Sense washing machine S/N 411048002028 AWOE 9210 - 30 9Kg for E499.00. I brought it home and plumbed it adding in a lime filter on the water line to protect it from limescale. On the 14th September 2016 a service technician replaced the entire drum as the old one made so much noise and the ball bearings are part of the drum. On the 7th June 2013 a technician replaced the drive belt claiming that it moved if a light load was put into the machine. On the same day I added an extension of 3 years Guarantee at Euro 89.00. On the 14th October 2013 a technician examined the machine for a water leak but found nothing and charged me for the call. Out E25.00. I lived with the noise of the spin cycle ever since. The noise got steadily worse until 27th September 2016 when the machine finally packed in. I stripped the machine down to find the ball bearings on the drum completely rusted over so the drum was rotating without the cushioning. On the same day I bought a Bosch machine and decided to forget about the extra guarantee as the offending parts had already been replaced once and did not even last 4 years. I will bring it to the recycling yard later today as that is all it is good for. It was bought in Media World, Orio Center, Bergamo. It was paid for by Gianni ** who is my father-in-law and had a loyalty card for the shop.

I have the 4.3 cu. ft. washer. This washer worked OK, but the lid lock does fail after about one year if the washer is in an environment where moisture may be present.I noticed the lid lock not working all the time about two months before the warranty expired. If this happens, call the warranty department immediately. After checking the ground wire and resetting the washer power over and over again, the lid lock finally stopped working completely. Here is how to fix it:There are two screws on the back of the top portion of the washer. Unscrew them from the silver straps. The washer lid will now push forward and up and off. Prop it up with a stick.Unscrew the two screws on the lid lock and start taking it apart (after reading this entire review). Be careful not to lose any parts and be sure to know where everything goes for re-assembly. Take pictures if necessary. Take the lid lock completely apart including any small pieces.The plastic slide needs to be cleaned. It has a spring that may fall when you pull it apart.The metal contact points inside the lid lock mechanism need to be cleaned. Be extremely careful when pulling the red cover off of the housing assembly. Pull the four metal contact points completely out of the plastic assembly. Be real careful with the black plastic slide piece, the metal rocker switch and the switch actuating motor. Use a small file and rubbing alcohol to clean off any green or white corrosion. Make sure to check all contact points.Re-assemble and you will immediately notice the lock switch working better. Re-install onto the machine. Re-install the upper portion of the washer. Start your laundry. Repeat after one year or when the lid lock becomes faulty again. These points should have been made out of a less corrosive material. Poor craftsmanship. Would not recommend.

I had my kitchen remodeled and purchased a Whirlpool built in electric microwave and lower oven combo (Models WOC54E and WOC95E). I selected this product because it had the right dimensions for my kitchen and I thought Whirlpool was a quality brand. Well I was completely incorrect about the latter point. Within just a few months, I noticed a drip line in the microwave door, between the outer and inner panel that could not be accessed to clean. I barely used the appliance and had no explosions in the unit that would account for this unsightly stain. When I called Whirlpool, they told me that cleaning and resealing the microwave door was not covered by warranty, and if I fixed the problem, then I would invalidate the warranty on the appliance. I had no choice but to live with this drip line, which has now been joined by others. I can think only that this is caused by condensation and that the door is permeable to moisture.Then there is the oven: When it is in use and for at least 30 min after, the fan on the unit is deafening. Not just a little noisy, but really loud. This is my first experience with Whirlpool and its products, and I would NEVER purchase others. They are not inexpensive and are clearly of substandard quality. The fact that Whirlpool is prepared to put a defective product on the market and then not be prepared to fix problems with the unit is appalling. DO NOT BUY WHIRLPOOL.

19 gallon Electric Whirlpool water heater Model #e1f20us015v - Purchased this water heater from Lowes to provide hot water to small apartment with no kitchen for my son, built in my garage. Had unit professionally installed within 1 foot of bath to provide hot water for shower and sink in bath only. Hot water lasts only 5 to 6 minutes and takes approx. 2 hours to recover. My son cannot even take a normal shower! ntacted Lowes who was unable to help and told me to contact Whirlpool. Contacted Whirlpool after my model number would not even come up on their website. I asked tech what was the normal expected amount of time before hot water depleted. She did not know. I asked what was the normal recovery rate. She did not know. I asked for information on the energy rating. She said there was no information available. I asked how I could receive a refund. She said that they could only send a plumber to check unit and that nothing would be done if it was heating water. I asked to speak with a supervisor. She said none were available and said one would call me. I never received a return call. VERY DISSATISFIED with Whirlpool on this issue. It appears my only recourse is to purchase a new water heater and scrap the present one.

I am getting numerous F1 codes on my Whirlpool Cabrio washing machine, Model #WTW6600SW2. By doing thorough research on this issue I can see the problem is in a known defective control board (part #W10130544). This part has even been replaced by Whirlpool with a new control board costing around $300 for just the part. After calling for repair service, two people (1 agent and 1 supervisor) refused to acknowledge any known issues with this part and further refused to any type of repair or replacement of the part. It is impossible for anyone in that position to not have knowledge of this problem. Simply look on the internet for a countless number of people with this very same complaint. Even though my washer is eight years old it has had very little use. There are only two grown adults in this household and the machine has never been abused or overused. It still looks new. Whirlpool should be honest and responsible when dealing with this type of problem. They should agree to pay for the part and repair service... at the very least they should agree to pay for the part.

I bought a Whirlpool water heater not even 3 years ago, and I am already replacing parts; thermostat,thermocouple, and as of yet, no fix. We contacted Whirlpool, and they said that everything has been tried, and if the thermocouple doesnt fix it, well have to hire a plumber at our expense. Its kinda ridiculous. The water heater that we replaced, had been in the home for almost 17 years.This one didnt even make it to 4.

In March 04 2014, I purchased a Whirlpool washing machine. After having had a Whirlpool for 17 years without any problems with it, I purchased another one. This last one is a piece of junk. I dont even want to talk about the noise, I think it is expiring or on its last leg. They should fire the engineers that invented this model and bring back the other engineers that invented the one I had for such a long time, they far surpassed these space scientists that they now have. On August 8, I called Whirlpool, they sent me someone from Dinos appliances. This man tells me that there is nothing wrong with this machine and that he re-calibrated it. Whatever that means, it is still not wringing the clothes properly. There are only 2 people in my household, so my loads are not very large. I even tried this Drain & Spin cycle after the wash was completed and the clothes still came out too wet. I also have a Whirlpool Dryer and I will not replace it with the same brand. I also will never buy a Whirlpool product again and will make sure that I will share my experience with everyone I know.

I bought a water heater in 2008 from Lowes department store. The heater would continually go out causing no hot water. The company had sent several technical repair men out to resolve this problem, and still the problem remains. The Technical Support requested that they will pay for the part and I could install it, not knowing if I am able to do such a job. The technicians who were sent to my home were not able to do the job. How do they expect me to do the job without proper experience? Whirlpool products are not reliable nor is their maintenance contract. Stay away from this company.

Cabrio he washer wtw6400sw2 - I bought this washer about 6 years ago at the time we paid around $900. Now my bearings went bad and the repair person told me it would cost around $300 to $400 to replace the bearings and seal and shaft but that I should call Whirlpool and see if they could replace the part or give me some discount cause it is becoming an issue with all the Cabrio washers. So I called and spoke with a so called manager - as far as I know it could of been a cleaning person there. She told me that she could not do nothing about the issue. So if a lawyer would be nice to help me and the rest of the world that are having all these issues to file a suit against Whirlpool Corp.

We purchased Model WTW81920758200YW0 on September 8, 2012. Its performance has been unsatisfactory, not cleaning the clothes as advertised. Not long after the warranty expired the main bearing failed, bringing a local service technician and we were left with a bill of over $300.00. Yesterday, the machine stopped in mid-cycle. The display went blank and the lid lock would not release. I called a local service company for a visit and the soonest a repairman could show up was next week.A call to a service we had used for the bearing surmised that without knowing the cause of the failure they could only guess that a circuit board was at fault. That visit would be over $300.00 with labor and materials. That was the last straw. We broke the lid lock to retrieve the contents and took a ride to buy another brand of washer. We went back to the appliance store where we purchased this machine to buy a Samsung front loader. The salesman apologized for selling the Cabrio in the first place. Good money after a bad product.

Purchased Feb 2013 - worked okay until one month ago. Now stalls in the drain and spin cycle. The rotation of the drum sounds awful, makes a loud grinding noise. I tried doing the diagnostic reset of holding the Temp button in for 3 sec, release, 3 sec more but that didnt work. Also, I have noticed clothes are DRY after the Wash cycle! Managed to interrupt the wash and unlock the lid and was very disappointed. This is not a good quality piece of equipment. This seems to be a very common problem. How unfortunate.

Ever since I purchased your washing machine, it has sounded like a diesel truck or cement mixer. You cant hear anything over the noise anywhere in the house.Have had two repairmen out to look at it and they say, Thats normal. I have a friend who has the same machine and it doesnt make noise like this one. I will never buy another Whirlpool product again and hope this blows up before the warranty expires. Also the tub is falling apart. What a piece of ** this machine is. You should be ashamed to put trash like that on the market.

We purchased the Cabrio washer and dryer set 2 years ago (7/22/15) from Lowes and have HATED them since day one. The first wash in the washing machine left clothes dirtier than when they went in. Our clothes have never gotten truly clean. The washer has a HUGE tub which is what I liked about it so I can wash my King sized comforters. What a joke that turned out to be. The comforters only get half wet even on the deep water setting. The machine even left dark stains on my light colored comforter and ruined it. Fast forward to 2 years later and the washing machine stops spinning and fills with water clear up to the top of the tub and wont drain. I had to put the machine on the rinse and spin option to get it to drain. Tried a different setting and it worked for a few months but started doing the same thing. The washer seems to be unbalanced no matter what size load I do. I am thoroughly disgusted with this machine and wish I would have never purchased from Whirlpool. The dryer has always worked fine until recently (2 years after purchase). It quit drying the clothes and leaves everything twisted up and wrinkled, even if I take them out of the washer and shake them out before I put them in the dryer. Doesnt matter what setting I put it on, the result is the same. So now it seems as though BOTH of my machines only lasted 2 years. Im not going to bother fixing them, these will be used as target practice. I will never buy another Whirlpool product again.

All of sudden, this expensive microwave stopped heating. Called whirlpool, they said they will charge $300 to fix it and $540 to replace. So much after paying new piece of garbage in 2-3 years.

Bought this side by side, Whirlpool with ice maker and water dispenser in April 2013 at Home Depot. From the beginning, we have NEVER been able to get any chilled water out of the refrigerator. Sometimes the water is even warmer than the water out of the tap. Repeated attempts to fix and now Whirlpool tech Tom, told repairman, sorry this is normal, no refrigerator can guarantee temp of water.” Ive NEVER had a refrigerator with a water dispenser not chill the water much less, come out WARMER! HORRIBLE DESIGN & BAD COMPANY POLICY! Will NEVER buy another Whirlpool product!!! Now its dripping water inside fridge! Model #: WSF26C2EXW01 Ser#: HR30821156

I bought a 3 burner glass hob under your built-in cooktop category (model no. AKCG 930-90 cm) in Nov. 2015 from Coimbatore, Tamil Nadu. In the month of April 2015 I started having problems with the medium burner. The problems was rectified on 29-4-2017 after some replacements that cost me Rs. 5000. After two months again the same problem occurred, the medium burner was not igniting again, I registered a complaint on 5-7-2017, the representative came and did some maintenance and left but the same problem resurfaced after a few days.I was fed up of complaining and started using the burner during necessity by placing a weight on top of the knob. Finally on 15th Feb 2018 while I was using the stove the glass top cracked into pieces. My experience of the companys built-in cooktop is horrible and bitter. Every time I registered a complaint the representatives used to attend the complaint after 2 weeks and that too after so many phone calls. I am really dissatisfied with the service and quality of the product. I therefore strongly recommend customers not to buy this product.

Ive had the WDF510PAY dishwasher for 3 years and the circulation pump broke. To be more specific the impeller inside the circulation pump warped and then basically got lodged because it became oblong and then it wouldnt pump water to the spray arms etc. I bought a new pump because the warranty only last a year. The pump cost around 90 bucks. After not even 1 full year this factory replacement pump failed again. I reviewed other Whirlpool dishwashers more expensive and I found they all have this same junky circulation pump. Im not sure of a better dishwasher but I would never recommend a Whirlpool dishwasher again. They also use the same circulation pump in Maytag and many other brands. Whirlpool or whoever designed and sold this pump to Whirlpool should be tracked down and beaten. Simple products like dishwashers should last more than 3 years. The technology is nothing new. A product should last 10 years at least.

Oct 14th I walked down to our basement to find it flooded. Turns out the leak came from the solenoid that controls the water feed to our Whirlpool Gold Series refrigerator. Now, some $28,000 in damages later - floors/cabinets/walls/electronics - you name it. The repair company said that they replace these units a lot as it is simply a faulty design and Whirlpool knows this as this part is very difficult to obtain - too much demand. Well aside from the cost, the inconvenience, and the rise in our insurance rates the repair person said there was a good chance of the new part failing as well - it just cant take the water pressure as it is just cheap plastic. My advice - stay away from Whirlpool!

I purchased the Whirlpool Cabrio washer in 2011. It has been nothing but trouble since. I have had repair people out here several times, because the machine twists and tangles the clothes, doesnt get the clothes clean. Sometimes the clothes come out dry without even getting them wet. There are lots of soap scum too. I would NEVER buy another one of these. SO DISAPPOINTED.

As a consumer, Im very disappointed in this Whirlpool Cabrio Platinum washer. It does NOT clean your clothes. Many times Im washing my clothes twice, only loading a 1/3 of a load of laundry in it because of this problem. No matter what you do, it just doesnt clean your clothes. Has anyone considered putting a law-suit against the company. They will NOT stand behind this issue, NOR replace your washer with something that works. Maybe that is what it will take. DO NOT ever ever ever ever ever ever buy this piece of crap washing machine. You will waste your money, your time, your extra detergent it takes to wash your clothes AND the cost of the machine too! The MILDEW SMELL is horrible and no matter what you do you CANT GET IT OUT! Ive tried it all. Im just angry because I had to save money to purchase this set and it is a piece of crap! The customer service is just a runaround, they wont help you! They will just give excuse after excuse. They need to replace EVERY ONE of our washers with something that works!!! For the cost of this machine alone, they should do something to resolve this issue!

Its a front loader and has lots of cycles and temperature to choose from. Its setting on a pedestal so its not too low. I dont like the way the soap is dispensed.. If you still have the door open when you pour it in the dispenser it almost comes out on you. It also knots your clothes up and makes them hard to get out. The rest is good.

My washer is a top load, energy and water efficient model. I am amazed at how little water it uses and how well it cleans. I do have two issues, the capacity looks huge but it will not take a queen size and double sheet set in the same load. It unbalances and then cant seem to get going again. The other issue is that you cant pause the wash and adjust things, you have to cancel and start over.

Takes 2 or 3 full cycles to dry small load. Big disappointment, drying is such a horrible experience since the clothes never dry when I expect them to. Not satisfied at all.

Worst purchase I have ever made. When I purchased this Cabrio washer in 2015, I didnt find bad reviews but how I wish I had. This washer does not clean clothes well. It has caused holes in clothing and towels. Often all the load wont even be damp even if using the deep water feature. The wash loads rarely fill more than couple of inches. Clothes come out twisted and terribly wrinkled. Sheets and blankets will be half dry and unclean. TERRIBLE APPLIANCE. WOULD NOT RECOMMEND. Now I am stuck with a high priced washer I wouldnt even feel good about giving away. WONT FILL. RUINS CLOTHES. TANGLES LOADS. DOESNT CLEAN. DOESNT RINSE PROPERLY. DO NOT BUY!

Bought the oven Model RBS275PRS 7 years ago. Since then door handle broke 4 times! Control panel had to be replaced once. Paid $750. Spent over $500 in repair. Now handle broke again but part discontinued. Can throw the oven away...

WTW5640X The machine is tearing up clothes of many including mine. I gave them the benefit of the doubt and thought I had over-loaded the machine. Not so. There has been nothing run through the machine other than clothes and bedding. When I called for service 1 1/2 months after warranty is out of date I am told I can have a service call including parts and labor and another year warranty for almost $400. If it werent for the numerous reports online of the machine doing the same to others I might have gone for it. Shame on you Whirlpool. Are you the next GM?

Whirlpool sent out a repairman to fix my range. I had it for 3 years, and one day I was baking cookies in the lower range and boiling water for pasta on the top left burner. There was a very loud pop, a bright flash in the glass top where the back left burner is, then there was no power to the range or oven at all. No clock display, burners would not work, oven would not work, nothing. As if it were unplugged. Of course, my warranty was about to expire in approximately 6 days (go figure) so I called the customer service line for repair. After 2 hours of back and forth with 3 different people, I finally had a technician coming out 4 days later. He shows up, takes about 35 minutes to get the glass top off, then says to me that he needs to order a part for it. This will take a few days. Ugh. Fine. 3 days later, part comes in. Same guy comes back out, fixes it. Ok.Up and running fine for about a year and 2 months. Then... POP! It happens again. Same scenario, different menu. (I was cooking breakfast). Now, warranty has run out and I have a $1,300 piece of scrap metal sitting in my kitchen. Worthless. My old KitchenAid stove was great. Had that thing for 13 years. Never a problem outside of replacing a $68 heating element one time. I paid $450 for that range. Tossed it out for this bells and whistles newer stainless steel glass top range/double oven. Regretting that tremendously. Whirlpool will be on my do-not-buy list for any appliance from now on. Didn’t even last 5 years. Oh did I mention the service call cost me $85? Yeah... Garbage!

My new washer is very inefficient. Clothes do not come clean and come out very wet. The cold water only rinse is not an environmental feature... clothes come out so wrinkled that instead of hanging them to dry as I used to (after shaking out the few wrinkles from a warm water rinse in the old washer) I now have use the dryer. This makes no sense to me... I wish I had spent half of the price of this new washer and had the old one repaired... at least then my clothes would come out clean.

Installed in May 2007, paid $674 for GU2455XTSS1 Whirlpool Dishwasher. It required service in March 2009 for $158 It became noisy in Oct 2011, so I placed a service call for $136. It was very noisy in Jan 2012. Again, I placed service call for an additional $93 that Whirlpool has not reimbursed. I must now replace the motor quoted at $403. The motor has a 90-day warranty. The 4.5 year old dishwasher must now be replaced. Whirlpool has not responded to email and to registered letter requesting a cost-effective solution to repair dishwasher that recognizes that reasonable life of the unit should be 10+ years and not 4.5 years.

I have bought what I thought my dream washer and would never need to buy another one. I told people about it and could have sold many of them. That was in my first year. Now I am into our second year with them and it quits. It cost right at 500.00 and when I called Sears, the company I bought it from, they charged me a service call and says it will be $585.00 to fix. WHAT? This is a lemon. If I were to buy a car and have this sort of problem they would warranty it. Why not appliances? This is an outrage. This should be illegal to sell.

The door broke down twice and taking months to repair. We bought the model WMH53520cb in 2017 April and since then we had issues with the door. Even the door is closed the microwave doesn’t turn on. The latest issue happened on Jan 2018 and still not been repaired. Seems like they are waiting for my one year warranty to expire.

The Cabrio model (WTW5640XWO) I purchased in March 2011 died within days of installation. I was given instructions to modify the hose placement which resulted in a flooded basement and ruined carpet. Problems continued during the first year; several service calls. The problem was always the same; it did not drain/spin leaving a mess of soggy wet clothes. It died a final death - the same problem a few months after the 1-year warranty expired. The repair people have been out four times since. The last time, a $70 repair lasted less than 3 weeks for a bad shifter - always the same problem. Whirlpool will do nothing except offer to send a repair team out for a flat fee of an additional $120 with no guarantee they would fix the problem or replace the lemon. This week this Cabrio will be heading to the landfill. Ive had enough. No more Whirlpool products for me ever.

We purchased KitchenAid Model YKESS907SS05 Electric Range from Appliance Canada April 2012, just before we took possession of our new home. We began using the range in July of that year and it worked well until September 11, 2014. At that time we decided to use one of the features of the range which is the self-clean feature. During which the control panel failed and our oven ceased to work.We contacted Appliance Canada and they suggested a technician come to assess. We called the suggested number and they send a technician that was not Whirlpool certified and we had to pay out of pocket for the visit $158. He did absolutely nothing during the visit. We then called Whirlpool Canada and they informed us that he was not Whirlpool certified and to call Appliance Canada, we immediately called Appliance Canada and made arrangements to have certified technician come to assess. Whirlpool Canada also indicated at that time that the board that failed was still under warranty and we should not have to pay. September 22nd the second technician came to assess the situation, used tape to cover the front blowing air duct so as not to have the hot air blow back onto the control panel. This was a temporary fix, they ordered a control panel in the interim that they would then use to replace. The control panel came in October the 22nd, was replaced and the new board was faulty, put old one back in and re-ordered another board. The part was on back-order. By mid November, after numerous calls, we called Whirlpool directly. They authorized that the technician to get the part from another supply source. On November the 26th, technician came back - tried new board could not get it to work, left it with us and ordered additional parts. At that time the technician who was taking the case had a family emergency and would not be able to come back out until the new year. Subsequently, Appliance Canada authorized a new company to resume our work with a new technician (Toronto Appliance). He came out December the 17th, with the board that was left behind, he was able to get the oven working. December the 22nd while in the middle of cooking a meal, the oven failed again. We called Appliance Canada and they had a Technician scheduled to come December the 24th from Toronto Appliance. However, on December the 23rd the oven resumed working. The Technician came on the 24th but because the oven was working again could do nothing. On December the 31st, while dinner was in for guests, the oven failed yet again. We called Appliance Canada, yet again, and they scheduled another visit with a new control panel and additional board. The technician arrived again today, January the 28th, and could not get the stove working. He was instructed to order an additional part and we are to wait another 2 weeks. In total, we have been waiting for 4 and a half months, we have also been told that we were not to have used the self-clean as this causes these types of problems. Why is it offered, in addition, Whirlpool has not supported our direct calls, nor authorized the replacement of a product, that for all intents and purposes, is faulty. We have had no success in the resolution of this issue nor support to reach a resolution from all parties involved. I would suggest not buying any product from those involved as their lack of support for their product is appalling.

We purchased a Whirlpool dryer almost three yeas ago. Its a front load, steam dryer--or WAS should I say. Almost a year ago, I was unable to calibrate the control panel (in other words, to change the cycle). Ive been advised by the tech that I need a new control panel $200. Really Whirlpool??? A $500 dryer that lasts two years?

This was a substitute for model I actually wanted, I was told the one I would receive was the newest model version of the model I wanted. What that meant was it was the stripped down version. It does not get clothes clean nor does it spin/balance the load which causes it to walk around the room. It is only 9 months old and I need a repairman.

Fridge is over 20 years old. Definitely got money worth. Need to replace all appliances soon??? Which model next. So many models to choose. Love one with freezer on bottom.

Standard looking dishwasher. Quiet and efficient. Best value for the money. Highly recommend. Chose this brand over more expensive options and made a great decision!!! I dont have a single complaint.

My wife and I purchased a new Whirlpool gas range (Model#WEG745H0FS0) almost 2 years ago. Woke up one night to the smell of heat and the oven had come on! Thank God we were home. Very dangerous! Repair is going to be expensive! Havent used the oven portion in about 3 months now. And Thanksgiving is just around the corner! Any assistance is greatly appreciated.

I purchased my Cabrio washer and dryer 2 1/2 years ago, and for the past 6 months, I have dealt with it being unbalanced and I tried everything to get it balanced. When I researched the problems, I found so many other consumers are having the same problems and that Whirlpool will do nothing about it. I decided to start a petition on Change website to try to force Whirlpool to stand behind their product and correct the problem, offer us a refund or another product, or even fix the darn thing. It is tough economic times, and we spent money to have something that was energy-efficient as well as a product that is supposed to carry a good name. I am a single mother with three children, and I dont have a $1000.00 to throw away after 2 years. This is shameful that we, the consumers, have to deal with this. Please go to the Change website and sign my petition. The more signatures I get, the more leverage we have to deal with Whirlpool. Lets pull together and show Whirlpool we will not stand for them robbing us of a quality product. Thank you so very much.

Nice looking, prices very fair for quality product. Options are always good. My mom used Whirlpool. That thing that goes in the middle of the old time washer is now gone. That thing would rip or stretch out clothing bras. Anything that was nice it would make it look horrible. Ive had my washer and dryer for 6 years and they still work like new. When shopping for a washer and dryer I do look for capacity, energy efficient and the brand. I prefer to stick to the old school brands just like my mother did. I must admit that I do love the fact that it is an HD high efficiency washer. The deal-breaker would be a low quality construction made a washer or dryer nobody needs to have problems with it. If youre spending that type of money you need to get good quality items.I love my washer and dryer. Theyre both and white color. Its a Whirlpool Cabrio with HD High efficient load energy saver and H2 wash system. The washer has a lid with a see-through glass which I love. My dryer is also a Whirlpool Cabrio steam with a resource saver that gives me a lot of different options as far as my clothing is concerned on how I need it dry.

I am really disappointed because I purchased the refrigerator and now the dispenser display assembly is not working and the company does not have the replacement part to fix it. So now do I have to buy a new one???

I purchased a Whirlpool fridge (model GX2SHBXVQOO) on November 27, 2010 and it leaks water on my floor. I have to keep a towel there or it runs all over. I also purchased a Whirlpool range (model YGFE461LVQ) and the convection fan went on it a month after we bought it. The manufactures warranty does not allow repair people to travel any further than 100 km to repair, something that we had to take the stove in to be repaired. We got the stove back the same day and brought it home. Low and behold, after a short period of time it started to rattle again and got steadily worse. Also, now my one burner on high does not stay on high; it keeps going out then coming back on.I have called the place we purchased these pieces of junk from and they said there is nothing they can do. I also sent e-mails to Whirlpool and they said they will look into it and get back to me. That was months ago. I called Whirlpool and was basically told that there was nothing they can do, that I was to call the repairman. Never, never, ever buy a Whirlpool product.

Same as others, We purchased a Whirlpool Cabrio Washer and there is a bearing problem (which seems to be the common issue reported). The washer is unusable at less than 5 years of age. The repairman told us its a bearing problem and its common for this to happen to the Cabrio. How can an Whirlpool get away with selling a defective product?

A top loading washing machine with an agitator in my opinion, gets my clothes 100xs cleaner than one without. Ive owned front loaders and top without agitators. Never again. Top with agitator is my personal preference from now on. Also Whirlpool has never failed me unlike other brands.

When we moved into our new home in May of 2012 we needed to buy appliances. After much research we purchased all Whirlpool appliances at Lowes. After a year and a half our Whirlpool model WRT5L1SMYFOO failed to freeze or keep items cool. We called Whirlpool and they connected us with a technician who said it would cost more money to fix than buy a new one. He said that we got a bad one. We called Whirlpool again and received no assistance. Refrigerators should last more than a year and a half! I have seen other complaints on this model and have yet to see any proof of restitution from the Whirlpool corporation. This is complete consumer abuse. Some sort of action needs to be taken against Whirlpool. This corrupt behavior is the downfall of our country.

We installed this furnace along with a matching 4ton a/c unit over four years ago. It was installed with a 3 zone computer controlled damper system to separately condition the three floors of our home. This furnace was ideal because it has a dual stage combustion chamber depending on how much demand there is. So besides being 95% efficient, the furnace can run at 70% or 100% heating capacity which saves on utility bills when the whole house doesn't need heat at the same time. It also had a variable speed blower which made start ups and shut downs almost unnoticeable. The blower actually ramps up to speed discreetly and adjusts itself according to the amount of back-pressure it senses. This allows it to respond to varying conditions as each of the 3 thermostats are calling for heating or cooling at different times. And yes here in St. Louis we have had days that require heat on the first floor and a/c on the third floor at the same time. The controller cycles between the two every 15 mintutes. All of these features make it ideal for our 2200sq ft three story brick home(four including the basement where it is installed). This furnace and control system along with new ductwork and dampers were able to replace the two old furnaces and a/c units originally in the home. We haven't had a single problem with it in over four years and would recommend Whirlpool Gold products to anyone I know. If I ever had to do this again in another house I would do exactly the same thing with exactly the same products.

I used my self cleaning oven feature and the fuse blew, leaving my oven with no electric current. I had to replace the fuse at a cost of almost $300 two months after the one year warranty of the oven expired. The technician suggested I no longer use the self cleaning feature since it will continue to melt the fuse wire. The oven becomes too hot, so I have an oven that I paid for with a feature I cannot use. I would not recommend this product.

My husband and I purchased a Whirlpool Refrigerator, model number GI6SARXXF04, serial number K20311478 on February 3, 2012. It was delivered soon after. In April of 2012 our ice maker quit working. We called The Appliance Doctor for service. They reset the control, and left saying that they thought it was fixed. The ice maker as a result was not fixed. They came out again, and stated that the ice maker needed to be replaced altogether. So they ordered the part and we waited for two weeks for it to arrive and be installed. By this time it was April 23, 2012.Then in June of 2013 we began having water pool in the bottom of the refrigerator and freeze, and water began to leak onto our hardwood floors causing them to buckle. We cleaned it up for a while thinking perhaps something had spilled, and busted up the ice on our own. The beginning of 2014 we called for service from Lanny Adams Appliance. The technician worked on it and stated that something was plugged up in the water line and he thought it was fixed, we paid for this service on our own. On August 14, 2014 we had another technician come out because it was not fixed. The technician came out and stated that it would cost another $219.95. He further stated that he thought that there was a recall of some kind, that I should look into it. I did look into it and printed out the Technical Service Pointer that was produced in November of 2013. When I called Whirlpool at that point, someone was sent to fix it. Of course I had already paid to have it repaired in February of 2014, Whirlpool stated that it was not their responsibility, which again it was not fixed until August of 2014. As a further note, my floors were never fixed because I have hardwood floors throughout my house and simply cannot fix the area in front of the refrigerator. My floor had just been refinished, and after speaking with the floor company that had just refinished my floors a few months earlier, they stated all of the floors would have to be redone or it would not match. Figuring Whirlpool is definitely not going to pay for that, I have just dealt with it, since it cost me over $3000.00 to have the floors refinished.Now, it is February of 2015 and the whole refrigerator is not cooling, and the freezer is not freezing. Again, I woke up to water in the floor on my hardwood floors, and have had to move all of my food to my ten year old Frigidaire refrigerator that is in my basement and has NEVER had a service call. After speaking with service company, they state it will cost $1200.00 to fix the refrigerator....REALLY? So, now I get to go spend a lot more money for a new appliance. You can bet it WILL NOT be a Whirlpool!I contacted Whirlpool again, and I spoke with Robin in your Customer Service Department after speaking with one of your Customer Service Representatives that stated I was basically on my own with the repairs. Robin stated that there was nothing Whirlpool would do, but she would agree to pay for parts and I will be left with the repair labor. Although your company may think that this is good customer service, I have to disagree given the fact that I have had nothing but consistent problems with the refrigerator since I bought it. At this point, I would like to ask you if in your opinion this is a good appliance? I asked Robin and she stated that I needed to buy an extended warranty. Dont you realize it isnt about the warranty? It is about the fact that I have had the appliance for 3 years and have had consistent problems. I believe the refrigerator is a lemon, and I would like it replaced.I have always trusted the Whirlpool name, but at this point, I do not see myself buying another Whirlpool appliance.

Whirlpool refrigerator - I purchased $6950.93 in Whirlpool products in one day last year at HH GREGG in Lexington, Ky. The refrigerator was purchased on that day September 18, 2012 and my kitchen wasnt going to be ready until December, but I wanted all items bought for measurements (specs) for the new kitchen designer. HH GREGG delivered to my garage October 26, 2012 because they couldnt hold any longer, but when we purchased that day they promised to hold till December when my kitchen would be finished. I have Proof from the kitchen installers the day they finished, December 28, 2012, was the day the appliances were installed. Well here I sit typing this letter on January 7, 2014 and my Whirlpool refrigerator is as of right now is in need of a compressor while losing approx $1000.00 in purchased food. In other words, approximately $900.00 in repair cost. Isnt Whirlpool a large enough company to stand behind its products when I paid $2599.00 for this refrigerator for at least one year from installation instead of purchase date? My fiancee has been trying to work out a solution with Whirlpool and the parts are on back order now. For at least two weeks we have been without a refrigerator and have two young children. Doesnt it show that the parts being on back order from Whirlpool, barely being a year old prove the defective product is being sold to the public daily? I plan on going further with this action due to the name Whirlpool all over my kitchen which disgusts me. Im going to write every columnist I can and do all I can with what little resources I have against this large company if no one helps us. This is absolutely an injustice against consumers...

This product is not even worth 1 star mark. Like everyone else the Whirlpool Cabrio top loader does not clean clothes well. It leaves streaks of dirt and lint. It does not agitate well at all and does not put enough water to the point where some of the clothes dont even get wet. I had a repair guy that was selected by the warranty company to come fix it and we were told that this is a problem with the machine and there is no fix to it. I am now stuck with a $500.00 machine that doesnt clean clothes. Hopefully Whirlpool will have so many complaints they will at least find a fix to this machine. In the meantime dont waste your money like I did.

[Model WTW6300WW0, Type 580] A few years ago Whirlpool goofed - they left out the Perma-press cycle on a high-efficiency washing machine model.We noticed the absence of Perma-press (or Casual as it sometimes now called) on the shop floor, and were assured we could arrive at the same results with the dizzying array of buttons that allow the consumer to tailor the cycles to their wash load. It turns out that it doesnt allow this. Buttons are disabled on some of the cycles, thereby preventing recreating a Perma-press cycle. No amount of prodding... Whirlpool has provided me with an override for the combination of a normal wash and a gentle spin that comprise a typical Perma-press cycle.On contacting Whirlpool about the missing cycle, they claim consumers no longer want the Perma-press cycle. Puzzled by this statement, I returned to the showroom floor to see for myself. All the washers have Perma-press cycles. Whirlpool goofed with this model. They left it out. They have not provided a replacement machine for a consumer who blows this whistle on their goof. Among the solutions their customer support DID provide: add softeners to the rinse cycle and add dryer sheets to the dryer to reduce wrinkles [by purchasing a high-efficiency machine, we aimed to reduce waste, not increase it]. Among their invalid suggestions: choose the Casual cycle [there is no Casual cycle setting on this machine]; choose Normal cycle, then set spin speed to low [this machine disables the low speed choice on the Normal cycle]; on this machine the Perma-press cycle is renamed Delicate [Wrong. Delicate only swishes clothes back and forth, not robust enough for business shirt colors and cuffs]; on this machine the Perma-press cycle is renamed Colors [Wrong. Business shirts come out too wrinkled on Colors]. There has been nothing I can do to convince Whirlpool that they produced a lemon in this model [Model WTW6300WW0, Type 580] and should replace it with a normal washing machine. I have tried for years, only for Whirlpool to come to the same conclusion: its the consumers problem now, not theirs.

Purchased a Maytag refrigerator in 2009. Was told Whirlpool bought out Maytag, never had a problem with it ever! Speed up to 2012. Purchased another refrigerator this time a whirlpool. HAVE HAD NOTHING BUT PROBLEMS WITH IT! This is the 3rd or 4th time the veggie/fruit drawer POS plastic track has broken. I purchased the extended warranty after a year and in addition to the above, had a new ice maker replaced, and a part in the freezer as the freezer wasnt freezing. So I called them to replace the drawer plastic track again and they say that its a cosmetic problem and they wont cover it. Are you kidding me??? It holds the drawers in for crying out loud! Also told the repairman that the ice gets clogged in the dispenser and either 1) melts all over the place or 2) comes pouring out when you open the doors. He tells me that its best to just use the ice cubes and not the crushed. Again... ARE YOU KIDDING ME? Thats why I paid so damn much money for this one as I wanted crushed ice! There should be a recall on this appliance. Repairman says all the models with the icemaker on the left side have problems with freezing and when inquired about my lettuce freezing and getting wilted or brown, he says that the humidity buttons are really only for looks and dont have a purpose!!! Believe you me... I will be sharing this on social media of all types to get this resolved. WHIRLPOOL BIGWIGS LISTEN UP! YOUR PRODUCT STINKS!!! Since we were gone on Friday when the call came in that they called it cosmetic on the drawers you bet Ill be giving these extended warranty people a call too tomorrow! Also dont say we have too much in our drawers because theres barely anything in them at all times. Its just used by 2 retirees!

I purchased the front load washer 4 years ago and the board went bad in 2 years. It costs more to fix it than the washer is worth. Stupidly, I purchased the top loading Cabrio and it has gone downhill from there. Has always sounded like a jet taking off in the spin cycle. Then 18 months into the purchase, it started with grinding noises and load balance issues on the spin cycle. Seems like they have a lot of issues with these Cabrios. Spent a lot of money for nothing. I will never buy a Whirlpool again!!!

I bought a Whirlpool Gold refrigerator four years ago, June 2012. Today, 9/20/16, I found out that the ice maker has to be replaced to the tune of $350! The repair person told me that Whirlpool has the worst track record, and of his service calls, he has at least three to five Whirlpool refrigerators per week! This is a terrible lack of quality. When youre spending over $2,000 for a refrigerator, you expect it to work for more than four years. Not only that, but I have e-mailed Whirlpool Customer Service twice and have been ignored completely. This is my last Whirlpool product, and I urge you to stay away from them. Samsung has a much better track record.

Back in the day GE appliances were made to last and last - the only one I have found close is Whirlpool. They have style, dependability and long lasting products. My washer machine has a ton of features and I didnt pay more for any of them.

We purchased a Whirlpool Water Heater at Lowes - model no. FG15040T3NOV, serial no. 0434120861, product no. 0730267 & weve still been having issues keeping the pilot light lit. We purchased the bottom unit piece that Whirlpool said would fix the problem but weve still been having problems with the pilot light going out. The water heater isnt under warranty anymore, so last night was the last straw & we finally decided to get another water heater that wasnt a Whirlpool. Ive done a research on the internet and found out that a lot of consumers are still having this problem to this day.

Whirlpool Cabrio Washer WTW5000DW - I have owned at least two other washers in my life, and I just recently bought a new washer/dryer set at HHgregg. Was told they are doing away with agitator washing machines in the very near future so this is my first experience with a top load agitator-less washer. This thing is AWFUL!! First of all it took a minute to get used to the weird popping, grinding noises it makes while going through the cycle (which I might add seems to take FOREVER). The other thing I hate about it is there is no way to add the fabric softener at the start of the wash in this model unless you have a downy ball of which I have yet to find at my local dollar store or even the KROGER??? So I run back and forth trying to catch the rinse cycle to STOP the machine (wait I might add) and then add the FS manually.BUT THE ABSOLUTE WORSE THING is - my clothes come out with SPOTS that look like lint all over them, and they wont wipe off unless you have a wet rag to do it with!! AND YES - I have cleaned this washer TWICE already since January with the very expensive AFFRESH. I wear scrubs and they are solid colors, so it really shows up and I have to wipe off every pair EVERY day before I put them on then roll a lint brush down them. WHO HAS TIME FOR THIS??? This is on my SOLID colors which is easy to see, I can only imagine the GUNK that is on the rest of my laundry!!! I dont feel like my laundry is getting clean at all!! I am divorced and money is tight - I paid around $500 buck for this piece of crap. I am already seriously thinking of getting me another one - the OLD tried and true kind with an AGITATOR! And yes I am ANGRY. Can you tell??

We purchased a Whirlpool refrigerator in December 2017. Since July 19 we have had the same problem with the refrigerator three times. The technicians don’t know how to fix it and Whirlpool refuses to replace it. The customer service rep was ignorant on the phone and could care less about a problem. Even though there is a lemon law they refuse to replace the refrigerator. We have to defrost the refrigerator every 2 to 3 weeks so will cool down again. Whirlpool is the worst company we have ever dealt with customer service wise. Lowes will not do anything about it because it’s within the first year.