Whirlpool Auto Load Sensing - I bought the washer in Aug 2010 and it worked well until the timer went out this year. Its only 4 years old! The repairman said it would cost $350 to fix - the machine cost me $469 to begin with! Whirlpool builds a poor quality product and Id advise people not to buy their brand of anything.

The plastic frames for the glass shelves are cracking at the corners and the only option Whirlpool has given me is to replace the shelves at about $150 each. Needless to say, the cracks started just after the 1-year warranty expired. If only one shelf was cracking, it could be my fault; but since all are cracking (some on the front, some on the back and some in multiple places), I believe this is a design flaw and should be covered by the manufacturer. When I call, I can only get through to someone to schedule maintenance or order parts. What can I do?

We purchased Whirlpool Cabrio Washer WTW5600 series in October of 2010. I bought the machine from Sears and also bought the extended warranty. Less than 6 months after I had been using it, I noticed that all my husband’s shirts were getting sweat stains under the arms and my hand towels were very smelly after drying with them one time. I called Sears to have someone come out and tell us what the problem was. He said I was using too much detergent so I reduced the amount of what I was using. It did not help the problem so I started using the extra rinse each time I washed, still did not fix the problem. I called them out 3 more times in 2011. One tech told me I was still using too much detergent so I reduced down to 1 tablespoon like he suggested. I stopped using softener in my washer because he said I needed to clean my machine more than one time a month, to clean it every 3 weeks. No solution to the problem still. I have had a tech from Sears and one from Whirlpool (who incidentally was the same man, he was from A&E Appliances). When he came in the door, my husband told him he had been here before and I said 2 times. He lied and said he had not been out before. Are we blind? No. He ran the cycle but sat in his truck while he was running it. None of the techs have ever put a tool on the machine to check if the water level is right. They just stand there and tell us to change the amount of detergent or clean the machine with Clorox more often. I cleaned it 8 days in a row and the clothes still smell and still do not get cleaned. We talked to main man at Whirlpool and said they couldnt do anything because their 1 year warranty had run out. We have been using Whirlpool appliances for over 30 years but I will not ever buy another one. I have probably had 5 Whirlpool washers over the years but never had a problem until we got this Cabrio top loader without an agitator. I would not recommend this washer to my worst enemy, if I had one.

I dont recommend this product to anyone. When you try to clean the washer it leaks out the bottom. After 2 years of use it now beeps 9 - 10 times and I have to reset it after each beep to get it to run. Then in the middle of the rinse cycle it does the same thing all over again. What a piece of junk. Plus it does not rinse well at all. Leaves a white residue on my blankets. NOT recommended at all.

Purchased a new Jenn-Air JCD2295KES in 2007 when we remodeled our Kitchen. Its been a decent fridge. When it quit a couple of weeks ago, I had the repairman come. He informed me that the HV circuit board was bad and sorry but they dont make them anymore. What, a 7yr. old fridge and thats it? I sort of expect things to have to be repaired or maintained but to have to throw it away because Whirlpool chose not to carry the parts any longer. I decided to scour the net and see if I could find this legendary board. Lot of places seemed to have carried it but could no longer get it from Whirlpool. I found a place that could supposedly repair them but after a few days, they called and said the microprocessor was not repairable.I contacted Whirlpool and they gave me a place that does obsolete parts and although helpful, I thought they were real opportunists and wanted to charge me considerably more for a reconditioned board that a new one would have cost if I could find one. I kept looking on the internet to no avail and when I called Whirlpool again I was getting pretty upset. Here I am with a 7-year old refrigerator and cant get parts for it, thats just not right. They were pleasant but basically their stand was sorry, theres nothing we can do. I told them that I bought a lot of appliances as I have quite a few rental properties. I cant throw an appliance away just because I cant get a part. It just doesnt make sense. I feel Whirlpool/Jenn-Air simply doesnt care. Im not interested in their excuses, I just want parts. I dont think it is unreasonable to expect to be able to obtain parts for at least a dozen years or maybe even a little more.I posed the question to them. Would you buy a $2000 refrigerator if you knew it would only run 7 years? The customer rep. said no she wouldnt. Well, Whirlpool, neither will I. I was unimpressed with their lackluster response and offer of a $300 rebate on a new fridge. I can find better deals than that on my own. I have purchased many appliance and always actually liked the Whirlpool line but Ill not buy any of them again. Shame on you Whirlpool for letting your customers down. Just because you can ignore me, doesnt mean you should. Im in business and I would go to the ends of the earth for a customer to make them happy. No wonder the Asian companies are kicking butt on the so-called American manufacturers. If your not going to get service you might as well go for the cheap price.On a final note, I did after two weeks of searching find a board hidden in a little appliance repair shop in Colorado. It should arrive here tomorrow and was priced $150 less than the reconditioned board that the gougers Whirlpool recommended. I believe it is the last board on the planet. Hopefully it will get my fridge another 7 years down the road and by then Whirlpool and its subsidiaries will have been sucked up by foreign companies and under a different label.

I purchased a Whirlpool Cabrio set 3 years ago based on their brand reputation and consumer reports. It has been a terrible experience since the moment the warranty expired. First, about 1 month after warranty expired, I had to replace the main electrical board. Then about 3 weeks ago, the drain pump failed. I purchased the $110 pump and installed it myself. Now this week, the spin cycle sounded like a jet engine. I took it apart to find that the bearings were shot on the drive shaft. I figured, well it is just a wear item, understandable right? So I went to order parts and got told that I have to order the whole outer tub for $250 with shipping! For some bearings! I called Whirlpool directly and was given no explanation other than Call some parts distributors. They may be able to help you get the bearing separate, but we dont do that and there is nothing that we can do. Amazing. I equate that to having a faulty brake on my car and being told that I have to replace the whole axle!Fortunately, the washer never really did a great job. It was loud and tore clothes up, so the decision to part ways was not too difficult. I have the list of brands they make and will be sure to never buy another. Im selling this one for parts. Im sure there are others out there that will need a pump and control board soon!

Buy a new in a box dishwasher, it is not working, not a good customer services, I wait 1 week for a tech to come and fixed, and I will wait to tech to come back with parts to be fix. Company not replace the unit, I pay for something that is not working. Very frustrated for the time waste. 3 day off from work.

I bought my Whirlpool range in 2009. Good thing I bought an extra warranty because since then, my oven has stopped working about 5 or 6 times. When I turn the oven on, it does the clicking sound, it starts up then it turns off and sometimes it doesnt even turn on. In 2010, I had my turkey ready for the oven at Thanksgiving. I turned on the oven and nothing. I had to cut the turkey and deep fry it. In 2011, same time on Thanksgiving and now Ive been waiting for 2 weeks for the part. I have 4 kids. I need an oven. I cant take this anymore. Also, out of the blue, sometimes the stove top starts clicking on its own and it scares the hell out of us. I have to unplug the stove. Help.

Whirlpool Duet Washer Trouble. Im having the same issue as Tom in Oakville. The F35-Sud errors pointed to the pressure sensor - NOT. 2 parts, a technician visit, and $800 later, Im still waiting on a Main Board replacement that is on nationwide back order. Time frame unknown.

Bought this machine at Lowes as it was recommended by the salesperson. The machine broke down in 2 months due to a control module. Besides that, the clothes do not get clean! They come out with all the stains still on them. The water does not even get the clothes wet! And they smell. Called Whirlpool up and they sent out tech 2x and said there was nothing wrong. Went back to Lowes and they will not honor my claim to replace the unit. I now have to purchase a new machine since this one is useless. Never will I buy a Whirlpool again and dont you either!!!

We remodeled our kitchen and my wife liked Whirlpool, I didnt, but I went with her since she got a good deal with Lowes. We bought a microwave, dishwasher, stove, and fridge. I cant wait till all of it craps out! Going back to Sears! In less than a year I have replaced the stove and stove, the fridge sucks. The fridge already had a defect with a water leak, damaged my hardwood floors!!!! Still waiting on Whirlpool for my floors. The dishwasher never cleans, it always stinks. The stove does not self clean, the handles dont stay tight, shall I go on!

I purchased a Whirlpool refrigerator at Lowes after my 16-month-old $4000 Samsung died and Samsung didnt care. I thought I was purchasing a better product. Six months old and the Whirlpool died. Service tech came out, said he had to order parts. That was on 1/21/2020. It is now 3/5/2020 and I still have no refrigerator. After being told week after week after week that I had to wait for parts, 3 weeks ago they finally approved a replacement refrigerator. STILL WAITING FOR THAT. Have completely lost confidence in Whirlpool and would not recommend the brand to anyone. Lousy customer service and lousy product. So disappointed. No reimbursement offer for lost food, weeks of having to purchase take out, gas to store daily... HORRIBLE EXPERIENCE.

This washing machine is awful. It takes twice as long to wash clothes. My older washing machine did clothes in 30 minutes or less. This thing takes over and over stop go, stop go, stop go. Open lid it fills again and removes water, when spinning the lid locks and you cannot open it without unplugging and starting all over again. The wash doesnt even circulate to clean the clothes properly arggghhh. Annoying as all get up. The washer has no control for the water level. The clothes dont have enough water to clean or rinse. I spent over $500 on this and cant get rid of it as most people are selling these on local websites as they hate them as well. Whirlpool thank you for taking my money and producing this junk. Never ever again! I think the seller is also responsible for not telling me what to expect of this junk.

Purchased this refrigerator in 7/2017. I cant stand it. Its pretty and works, but the NOISE!! I bought a white noise machine and placed it on the countertop next to the refrigerator just to drown out the noise (very high pitched sound). Repairmen came out twice. A part was replaced, but nothing changed. Said have to live with it. Dont buy Whirlpool or youll go crazy listening to this all day, especially with an open concept home. You can hear it everywhere!

Pros: The refrigerator is large and roomy, easily adjustable glass shelving, and easy temperature controls for the refrigerator temperature and freezer temperature. Cons: the refrigerator is bulky and limits space in a small kitchen. The lower freezer door does not seal very well and requires frequent tweaking and adjusting around the door seal. Also, the freezer handle becomes loose easily and requires tightening fairly often -- which is a pain to get on the floor on your back (and a flashlight plus a special wrench) to tighten the handle.

I am concerned that Whirlpool microwaves installed over the stove have extremely faulty doors. I have two homes in which I have Whirlpool microwaves, and both have huge cracks in the door and small pieces inside the doors beginning to fall out. It deeply concerns me that it will cost more to replace the doors than to replace the microwaves. I have always believed in Whirlpool appliances but now feel that I will have to change brands. My question is “What in the world is wrong with your doors that they crack so easily and the company holds no responsibility with such faulty work?” I would simply think that this was just a faulty door on my microwave, but I have two that are cracked! This definitely means you have a faulty product.

I purchased a Whirlpool gas stove model #WFG540H0AH from Sears in March 2103. Since that time, the oven has repeatedly broken. After two major repairs, the repair company said the fas venue (?) suspect board was defective and needed to be replaced by the manufacturer. After 3 weeks of back and forth calls with Whirlpool customer service, the only solution they provided was for me to purchase a new stove at a discount with no compensation for installation, the gas connection kit, or haul-away of the old appliance. The original stove cost me $1100 including the installation, haul-away and taxes. The replacement option would have cost me $800 and still did not included haul-away, the gas installation kit, or taxes. Hardly an affordable solution. Whirlpool at no time addressed that a part on the stove was deemed defective.

Does the CEO know you do not stand behind your products? My washer is not even a year old and cost about $400.00. And you have stuck about $1800.00 into repairs instead of replacing a lemon washer! The washer had problems the 2nd month I owned it and you stuck a new clutch in out. Now just about everything replaced, it still does not work so I will order more parts. This is ridiculous. I would love to hear back from your CEO and would like to be reimbursed for 5 days of pay to take off and wait for repair men, laundry mat fees, etc!

After getting a suite of Whirlpool appliances from Home Depot, I found that they were a little below standard to previous Whirlpool we’ve owned. I found the top of the Electric stove could be easily scratched and the refrigerator was noisy. The stainless steel seemed not as heavy as our other ones. The Whirlpool insignia on the refrigerator came lose and I needed to glue it back on. I’ve always had good luck with Whirlpool and we’ll see how this goes. Just to be safe we bought an extended warranty on the fridge.

The washer is a lower priced but basic machine with few bells and whistles. However this is what we wanted. Less tech with less problems so for us it works. Does the job it is required to do. Cycles do take much longer than our old machine did. Probably due to water conservation.

I had to re-arrange my kitchen and have my slider doors moved over a foot to accommodate this monstrosity. After about 2 years the icemaker and water dispenser died - had to shove a facecloth in it to keep it from making noise. The white color is very hard to keep clean. Overall, I would not recommend a Whirlpool brand refrigerator.

We purchased a $3000 WRF990SLAM00 / K22019120 refrigerator in 2013. Within the first two and a half years we have already put over $700 in repairs. We were told today the coolant for the ice maker has a leak (either a slow leak or a fast leak, they arent sure). But from here on out we will have to put coolant in it to keep the ice maker working. A week ago we spent another $300 to repair the water dispenser. This is the worst fridge we have ever owned. Whirlpool could care less and we are basically out right at $4,000! DONT BUY WHIRLPOOL.

I own a top two door refrigerator cabinet with a middle drawer meat cooler and a pull-out out lower chest freezer. The ice maker is built into the door and it is a very simple to operate and stable appliance. The refrigerators space is very functional and flexible for your food storage.. We have moved it 3 times and never had a problem. It is my wifes favorite appliance and fits our needs perfectly without a lot of bells and whistles. The ice maker filter is easy to change and the ice maker itself is super reliable. The model number is WRX735SDBM00. We have been Maytag and Whirlpool appliance owners forever because of their reliability and the ease of used to clean them.

We bought our washer (Whirlpool Cabrio) from a rent to own company about 2 years ago, and finally got it paid off. About a week ago, the lid started sticking when it was done washing. I went to open it last night to start some laundry, and it BROKE. Now theres a piece stuck in the bottom part of the lock, and the washer wont start. Anyone else have this issue?

We purchased the Whirlpool double oven gas range from Lowes in July of 2014. The oven heat that boils out onto the stove top when you use either oven makes it difficult to handle the pots on the range top. The first time I used both ovens at the same time the plastic front to the control panel started to melt and the fumes were horrible. It was under warranty so Whirlpool replaced it with an identical panel that also melted when I used the top oven and range top at the same time. Its out of warranty so Whirlpool says its not their problem. From reading these other complaints it is obvious to me that customer satisfaction is not important to Whirlpool - just that profit margin. Build cheap - sell high should be their motto.

We bought model WRS571CID*** which has an in-door ice maker that has stopped working after exactly 3 years. An excellent authorized service rep advised that the wire harness from the freezer to the door was damaged by chafing from normal opening and closing the freezer door, which has caused the ice maker wires to break, thereby disabling the ice maker. The only remedy is replacing entire the door, which would cost $1700 according to Whirlpools published repair data, which he is obligated to charge. Apparently, the wiring harness is not a replaceable part, because I suspect the labor hours needed to disassemble and reassemble the door is prohibitive. Well, a new fridge costs about the repair. I spoke to the Whirlpool company about whether they acknowledge that the design is faulty and that the door should be replaced at their expense even out of warranty, and they declined.So I advise prospective buyers to be aware of this issue and watch other reviews. There are many customer reviews on various sites complaining about this very issue. Our workaround is to put ice trays into the freezer to make ice, and while the dispenser still works, pour the ice thus made into the ice dispenser manually - until the wire control that also becomes damaged and stops working. I would not recommend buying this model.

55 Gal Electric New in 2003 / Limited Lifetime Warranty - I paid quite a bit more initially at Lowes for this unit. Its stainless lined. I have had numerous problems since purchase. I had to replace the sensing element in the Smart Box in 2006. Then the lights started flashing again making a humming sound in the box. I took each piece apart in smart box and cleaned them, which seemed to help. Then the upper element that is also stainless that requires a special wrench to replace went bad according to the blinking lights. Lights stopped after several resets. Now, the water is boiling out of the top of heater and they tell me its the seal in the element that I never replaced. The cover for the element is off. Water cannot possibly build up and force out the top of the cover of tank. I am not an idiot, yet they tell me that is most likely the problem. They didnt listen to me long enough to properly assess my concern. Every plumber I talk to says its the separation of the liner inside the heater. Nonetheless, I have a water problem now in the basement and have never heard back from Whirlpool as promised with troubleshooting guide on an email. I am sick of calling and getting the runaround with every issue. The warranty is horrible for the consumer. Sure, you have a limited lifetime warranty, but when you cant get proper information when you need it, what good is it? Made in America is why I bought the product. I also need a new washer but will not be searching in the Whirlpool line due to their lack of care with an important issue with my heater.

I purchased this washer from Lowes 5 months ago. I did not purchase a store warranty. Started having problems 60 days later. I have to deal with a Whirlpool rep. The company is 150 miles away. They have been to my home 3 times to resolve the issue. They replaced an air trap. The problem... my clothes still wont spin dry!!!

We purchased a new Whirlpool dishwasher in June of 2014. By February 2015 the racks were rusting. I called loses warranty and they referred me to Whirlpool since it was still under a year old and covered by the manufacturer warranty. They said no problem and would have new ones sent out. Three months later I still did not get them. I called them back and they said that they were not covering them due to rust being normal. This is the absolute worst customer service and it says a lot about how Whirlpool stands behind their products.

I purchased a Whirlpool Gold from ABC Warehouse in Flint, MI, for $2099.00 before tax and it was delivered on 10/22/2010. Head-liner of inside of refrigerator has a crack about 3-3 1/4 inches long and the refrigerator is running more often. A repair tech came today, 10/14/2011, and did his job fine. He called Whirlpool and they stated to fix it with epoxy? The repair tech is ordering this. I called Whirlpool at 9:00 am right after the tech left at 1-800-253-1301 and spoke to Sherry. I explained everything to her in a very nice manner and she stated that according to the manual, they give us it is for repair only? I said, ok, could I please speak to her Supervisor and she said yes but it will be the same answer. I spoke to her supervisor, Lisa at 9:15 am, she came on talking about the problem and let me talk, I asked her on several occasions are you still there, and she said yes, her words were that Whirlpool only repairs nothing else for the year as per my paperwork (record). I said we dont even get this till after we purchase the item, I mentioned I had a Cabrio Washer and it was junk and had more service calls than any other machine I owned. I have a stove as well from Whirlpool it’s been good so far, I told her with service like this, and them knowing their liners are made of cost cutting saving materials as I have read enough complaints about this on the internet, that Whirlpool is eventually going under and so are the other small shops that do part work for them and their jobs will be outsourced to Japan, China, India and so on, I asked if there was another person higher up than her I could speak to and she said no, they’re not available at this time I snickered and said thats management for you. They have a customer service rep (call center complaints which is Sherry), then supervisor like you (Lisa) then some other management that dont want to talk to you. Way to go Whirlpool. I told her to document that I will never buy another Whirlpool appliance and I will definitely tell others and so on, and if we get enough folks to ban them they will leave USA or close and then Sherry and Lisa will be unemployed just like the rest of us in the good ole USA. Poor appliances for folks that can barely afford to make it and if you’re lucky and working like me and you buy something; shouldnt a refrigerator last more than this, and you stand behind your products? I also told her I know some are abused but this was not an abused product from me. It is a Whirlpool ‘cut your cost savings product’, and forgets the customer. Please look at the old appliances, I also mentioned I have an old Amana in my garage that is 17 years old runs great and never had a problem. And I gave her up for this piece of junk Whirlpool. I then told her I will write letters, emails and everything I can think of to ban this make and product. Model number of this refrigerator is GI7FVCXWBO, freezer on the bottom, fridge on top, side by side doors, solid black with ice maker. When I purchased this I bought it to last a long time as I had to finance it, and take from our monthly income. I had never had a nice fridge, but heck this is not nice. It’s a joke and the sad part is, I owe over $900.00 still and just got laid off. Thanks to the good ole USA and Michigan, but I will pay it off no matter what cause I pay my bills, and stand behind my name as a good person and citizen unlike Whirlpool. Boycott their products as they dont care about us or the American workforce. Oh, and this damage was not caused by abuse to the fridge - it was poor quality of materials in their products. Thank you for letting us complain about products! Also, it’s not like I can go out and buy another refrigerator as it took me over 18 years to get this one. Thanks WHIRPOOL for letting me down on another bad product but it will never happen again. Ive definitely learned and will teach others. Its just not fair that these big manufacturers can get away doing this to the poor people, maybe its like they say; corporate greed?

This microwave had been the best I have used for several reasons. One is the modern design that goes with our kitchen. Two: it heats the food very quietly and produced an even temperature through out the food. Three; The inside of the microwave is easy to clean out.

I have a Whirlpool Gas Water Heater, product #0733136, that was installed in 2010. The pilot has repeatedly gone out and had to be re-lit. After reading some of the comments, I am amazed that other people were told to verify gas supply with the gas company (done) and clean the air intake (done) and then to call customer service and be told to do the intake cleaning again (done professionally six days ago). I will never buy another Whirlpool appliance, and fortunately, I am in property management and can advise others to avoid this company as well. I am extremely disappointed in Lowes for not doing a better job of providing reliable choices for their customers especially after these many complaints over the years. I have decided to replace the water heater with another brand immediately.

My wife and I purchased the Whirlpool calypso washer and dryers and have been regretting ever purchasing a Whirlpool product. Not more than a year and a half after spending thousands of dollars on their products the troubles started. I called the company and they sent someone out to look at it for repair. He vacuumed out the lines and kept restarting it over and over and eventually it started working again and they charged a hundred dollars and something and said there most likely be more problems since they have many calls on this issue. Sure enough it started again and just kept retrying it over and over to get it to work again as well as vacuumed the lines again like he did. Now its at the point it will not work no matter what. It just keeps flashing LD and shuts down. So I did a online search for other consumers having the same problem and was shocked by the amount of the same problem with others (search this model flashing LD and you will see for yourself). When I contacted Whirlpool they played dumb and lied right thru their teeth saying they have no issues with this model and refused to do anything. I have since learned there has been court cases where the courts ruled against them saying that it was defective and had to notify consumers which they never did. Even when the repairman came out nothing was said. I have since learned that all they did was changed the name to a different model which is having the same problem (no kidding!!) and continued to rip the public off in the name of CORPORATE Greed!!!!! I advise everybody never to purchase a Whirlpool product ever again and maybe we can bankrupt them and put them out of business where they belong. All the customer service agents deserve to be unemployed and suffering after long waits on the phone and then lying straight face to the consumers. Pure evil!!!! We all have to stick together and bring these criminals down. How can they say we have no issues when a simple search of Whirlpool Calypso problems with draining and flashing LD and shutting down. There are thousands of people complaining and no action is done. Shame on these people and their souls are lost forever. Never buy a Whirlpool product and tell everybody you know to stay away! They should have their ** and/or ** cut off and have to suffer the same way the struggling consumers are after scrounging up thousands of dollars for a 200-pound metal paper weight that aint worth a damn!!!!

Although stackables are a little pricey, Ive had this dryer for around 10 years and its still working just as good as the first day! Never had any repairs done on it. Great dependable dryer and washer!)$ Ive dried regular size loads in it also! A loyal appliance through and through! Thanks Whirlpool for such a great and dependable product! Whirlpool Heavy Duty-Automatic Dry Miser-End of Cycle Signal*3 Cycles.

Purchased a Whirlpool refrigerator July 29, 2015. Our first service call was August 4, 2015. The units freezer was frosting over, the basket rails were covered in frost, which made it hard to open. Items in freezer containers were covered in frost and labels unreadable. The interior light was frozen shut. Since the first service call we have had 8 service calls with multiple appliance dealers. No one can fix the frost issue. It just keeps recurring. Whirlpool did step up and extend our warranty for another year. In order to schedule a repair we have to call Whirlpool, a 45 minute phone call for an appliance company not of our choice to make the service call. The unit has been removed from our home for repair in dealers shop. Very inconvenient for us to have no refrigerator. Whirlpool has refused to replace the unit, choosing instead to patch-patch-patch one service call at a time. Whirlpool has enjoyed years of an excellent reputation. We are very disappointed. This is no longer true.

I have a cabrio washer which is the worst washing machine I have ever seen. I can wash a small load of clothes and the ones on the bottom dont even get wet after being in the machine for 60 minutes. I have tried setting it to heavy loads, added water, stopped the machine and redistributed the clothes, it was a total waste of money. Dark colors come out looking worse than when they went in. If I save money on water I spend twice as much on electricity because I have to wash everything twice. The store where I bought it went out of business so I have no recourse.

I purchased Whirlpool french door refrigerator wrf535smbm00 at the beginning of this year and it has really made my house an unpleasant place to be. My main complaint is that it is very, very loud, and seems to vibrate through the whole house. It runs most of the time at a level of 60 dB, which might be considered a low noise level for a mechanical appliance that runs occasionally like a dishwasher, but is quite loud for an appliance that, according to their own specs, runs at least 40% of the time. Nobody wants to notice their refrigerator. They just want it to work.Which brings me to my second complaint, the temperature control is all over the place, generally ranging from 25-50 F. I find it difficult to believe that the government, which always seems overly concerned about the temperature of restaurant food, or the pasteurization of cheeses doesnt care that an appliance nearly every American household has doesnt necessarily do its job, and isnt required to display internal temperature. The old-fashioned set this dial to an arbitrary number and hope its cool enough is not charming.Finally, though the finish is listed as stainless steel, mine started sporting tiny rust spots after only three months. Whirlpool states that Cosmetic issues are covered by the manufacturers warranty for the first 30 days of ownership only. After the first 30 days any repairs for cosmetic issues are the consumers responsibility. It seems as though they know theyve used a low grade of stainless steel.

This Whirlpool washing machine is incredibly annoying and slow in everything it does. First off when you press the START button it takes 2-3 minutes before it decides to do anything, like maybe add water (except click, click and more click). If you have pressed the start button and you want to stop it to add something... again you have to wait almost 2-3 minutes before the lock is released and you can open the door. I am at 2 hrs and 15 minutes as I write this on the LIGHT WASH cycle with extra rinse and its still going. I have never seen anything like it. Cant imagine how long a HEAVY CYCLE takes. Cannot even try to measure the time. I put the load in and go to work and hope its complete when Im done 8 hrs later.We had a Maytag for 15 years with no issues (other than a drain hose cracked and had to be replaced) and it was time for a new one with a move to a new place. The sales associate convinced us this was the best machine at the time... Well what a mistake that was. There are no complaints about the actual washing. Everything comes out clean but I suppose taking that long I cant imagine why it wouldnt. I certainly cant recommend a Whirlpool washer to a friend, because I dread the thought of doing laundry at this point.

I purchased a #Whirlpool; 4.3 cu. ft. Mini Refrigerator Stainless Steel BC-127B from @Target. There was a delay putting it into service (6 mos), so the Target store warranty was expired. The unit remained in its factory shipped packaging until put in service, so nothing out of the ordinary there. After barely two weeks of use, the compressor died. I followed all instructions (including waiting 8-10 weeks) from Whirlpool, but still have not received a refund or been given any information beyond we escalated it to our warranty team but havent heard back yet. The unit was a poorly made piece of junk in other respects as well. There are dozens of complaints about precisely this - defective units - on any site. Do not be fooled by the dishonest way that #Targets website lists reviews. Dig deeper.

Bought new dishwasher on 11/29/2013. Model #WDT710PAYM. The top rack cannot hold much weight. It keeps collapsing. One side keeps falling out of the track. Had man in for repair, still doing it. They sent me a new rack and rollers, still doing it. Having repair man come back again in a few days. I am so disappointed with Whirlpool. I cant believe they went so cheap in building these machines. I gave away a whirlpool gold that was 20 yrs old and it is still going strong with no problems. I just wanted to update up kitchen with stainless steel appliances. I will never buy whirlpool again!! This cannot be fixed. It just doesnt fit tight. Im stuck with a bad dishwasher and shouldnt be.

I Purchased a Whirlpool ceramic top self-cleaning oven & side-by-side refrigerator from Sears. I just want to share my experience. I do not have the exact year I purchased them. Too bad I was not aware of this site but after a year with the refrigerator I knew I would not buy another side-by-side and not a Whirlpool. The refrigerator motor runs too loud, the ice maker was forever stopping even during the summer. If you cleared the ice jams it would not reset for hours. The ice maker was replaced under warranty but it still jams; however now when you clear the ice from the trays it produces ice quickly.The temperature in the oven seems to be off now. I purchased a oven thermometer and to verify the temp and they are never the same. But my major concern now is the self cleaning feature. The front door is Yellow and unsightly from the self cleaning cycle. As I sit here typing, I hope the oven does not start a fire it is very hot. This is the last time I intend to use the self cleaning cycle again because I feel it should not be this hot. The ceramic top is hot enough to burn if you touch it. Strangely I checked the oven storage drawer and metal pans in them were okay. Cabinets beside the oven were just a little warm. But This customer will not purchase Whirlpool again.

We bought a gas Whirlpool Stove from Lowes. We noticed it was not heating like our last stove and thought maybe because it was new. No the stove does not heat properly at all. I cooked a pork loin for 40 minutes at 350 and it was still raw in the middle. I have had to cook everything on 375 which makes the door handles and knobs very hot. I called Lowes and they patched me into Whirlpool after a 45 minute wait. The rep from Whirlpool said, you can look at the manual and figure out how to calibrate it. No I cant. I have a warranty that is what it is suppose to cover. Then I was on hold for another 20 minutes. Really no one should tell you to read a manual to fix a gas stove. I will not buy another Whirlpool item. Poor customer service and that make you feel you are bothering them.

These machines are designed to clean your clothes by rubbing them together which they attempt to do in a minute amount of water. They destroy the fabric, pull the seam out of shape, wrinkle them beyond the point of wearable, do not get them clean and do not get all the detergent out. I have had clothes come out partially dry. They also do not dilute the fabric softener, leaving unremovable stains on your clothes. In addition, they take forever to do a load of clothes even without the extra rinse you need if you want any hope of getting the clothes rinsed. The dryer is the slowest dryer I have ever had. The steam refresh that is supposed to get the hideous wrinkles out of your clothes does not put steam into the dryer. Instead, it sets the dryer to the highest heat so that those clothes you did not want on high heat are now getting it; then it shoots bursts, yes large bursts, of water on them. Your clothes come out a combination of still wrinkles and wet. If you hear of a class action suit, please contact me. These machines should be recalled.

Bought on 9/11/2014 and installed by Lowes installers on the 15th. It quit heating two days later. Called Lowes and they said I would have to call Whirlpool. I did. WP had me metering with a multi-meter until found OTC button was tripped. Then they suggested I troubleshoot the elements and sent me a video. I called Lowes and they said they would replace. Later they called back and said WP would not give them a RA number and for me to call them. I did and the rep after much arguing directed me to call their factory authorized service, A & E. I did and they said it would be 33 days before they could come out. I hung up and called Lowes who called back later and wanted me to call WP again. This time they said they did not have a repair service close enough to come, but I could try buying the lower heating element and replacing it to see if that worked. I said no, the heater was brand new and they needed to fix it. Their next solution was have me contact a local plumber and arrange to troubleshoot, me pay the plumber and then send them the bill. They would reimburse me up to $100.00. Not acceptable and now the button has to be reset every few hours and the water gets scalding hot while it is heating. I called Lowes and they said they would get back to me, but I have little hope of a resolution. Product number is ** SN is ** Model is E2F50HD045V. Bought at Lowes, Lindale, TX.

I purchased a Whirlpool® 4.5 cu. ft. Front Load Washer with Load & Go Dispenser in 2017. By August of 2020 the washing machine was no longer working. The machine would continue to fill with water and not shut off. The machine would then give an error of E01 and F03 and drain all water within 5 minutes of the wash load starting. I had a certified Whirlpool technician come and diagnose the problem for $99. The technician said these error codes happen ALL THE TIME on Whirlpool washers. The technician tried to replace the water pressure switch with no success. He then spoke to a corporate office and was told we would have to replace the motherboard for over $500. The total cost for the diagnosis and repair was almost the exact price I paid for a new washer just 3 years earlier. I will NEVER purchase any Whirlpool appliance ever again.

In 2013 my oven died. Upon doing some research my husband and I went to our local appliance stores in search of a new one for a good deal. We chose a Whirlpool electric range with convection oven. We have had it 2 1/2 yrs and have used it often... until today we had been very happy with it. While baking some French fries we heard a loud pop, almost like a shot, running to the kitchen to find the inside tempered glass shattered! Wow! Shocked to say the least we couldnt believe it. Called our Lowes store, to no avail our warranty had expired. They gave us Whirlpools number with no success. I am extremely disappointed and will probably never buy Whirlpool again!

After only two and a half years, my Whirlpool bottom freezer refrigerator (GB2SHDXTQ0) was frosting over and the top food section stopped working altogether. I made a call to Lowe’s. It’s not their problem. I then called Whirlpool and he said I had a bad gasket. I had a 28-year-old refrigerator that was still working with the original gasket and it has no problem. After reading all the complaints with Whirlpool, I would never buy another one again. After cleaning out the refrigerator and freezer two times, carrying things to a friend’s house and having to pay $90 service calls just to walk into the door, I am ready to throw this one out. This refrigerator cost me $1200 and I am a single person living on $900 a month. Thanks for nothing, Whirlpool. There should be a class action suit.

Sturdy, durable, and flawless operation, from the 5 multi style smooth top elements to the self cleaning convection oven with the secluded bottom element. It is a sleek clean looking appliance, and its the best weve ever owned. To one that says they dont make them like they used to, I say thank God!

I had a Whirlpool GI7FVCXWY01. Purchase 3/13/2010. I had repairman after repairman come to fix it. The last one probably saved my family and my house. The light in the back corner was not only blinking, but flashing rapidly, much like some wild party light. It eventually stopped. The freezer works perfectly fine, the fridge works when it wants to. The ice maker makes ice some days but not others. The motor on the ice dispenser is completely frozen up. Does that all sound about right? If it does, clean it out and cut the power to it before someone gets electrocuted or your house catches fire.If you cant find the electrical diagram, or the company wants $455 to answer your questions, look under the right side of the freezer draw, but not on the draw. Remove the guard on the very bottom of the unit, near the wheels on the right side. You will feel a plastic bag attached to the underside. Inside that bag is the complete diagram of all the wiring harnesses along with the schematic for the amps and voltages for each wire. Are they telling your circuit board is bad and you will need a new one? Before you do that, inside the fridge compartment, in between the water filter and the ice maker, remove the light cover. Notice that inside that space is the access to another panel. Remove that panel. BE SURE THERE IS NO POWER RUNNING TO THE UNIT FIRST. Here you will find a connection plug with more or less 15 wires that are connected to the main wiring harness. Above that plug you will find a holding chamber. This holding chamber contains water from the filter that is waiting to go to the ice maker. It has dripped condensation on the plug since the day you first turned on your fridge. Your wires are most likely broken and corroded. You will need to have your unit completely rewired, but because of the design flaw that fix will only buy you another 4-5 years. My Whirlpool GI7FVCXWY01 left yesterday 5/15/2014 and none too soon.

Cabrio top load HE washer - Ive only had the washer a couple of years. My husband bought it for me thinking it would make washing more time efficient and energy saving. Lesson learned! After struggling with this washer for the past year, I was told today that to repair it, it would cost around $800 or I would need to buy another washer. The washers bearings and tub need to be replaced and it will not spin properly or at all. Previously, I have owned washers for over 10 years each. This was definitely not a good purchase. After reading all of the other complaints on this site, I understand that I am not alone. It was also mentioned on one complaint of the possibility of a fire hazard with this washer. Whirlpool should be recalling.

I bought a Whirlpool refrigerator about 1 1/2 years ago. Mechanically it works fine, but many places on the outside are showing small rust, circular rust spots. Looks like the refrigerator has the measles. I dont think ordinary paint will cure the problem since it looks like the rust is coming through from the inside of the door. Any ideas as to what will cure the appearance and keep the rust hidden????

I bought this washing machine after having my Kenmore for 20 years. This washing machine is a nightmare. I have to wash my clothes 2 or 3 times, to get them clean. Everything has residue on them. Once a month, I do use a cleaning tablet, and between loads, I wipe the washer out too! This is the biggest piece of junk! Save your money. Buy an old school washing machine.

Ive had this microwave for about a year and a half. Like some others I get the door sign frequently. I open the door and cant turn it on until the light goes on, which can take a minute to two. I have NEVER had problems with any microwave other than this one. I had a problem with the Whirlpool refrigerator too, which was fortunately still under warranty. I bought the fridge, oven and microwave as a deal. Trust me, there is no deal here. I will never buy this brand again. Lesson learned. Given other reviews, I might just buy another brand of microwave. Worth not having the hassle.

My double oven is less than 2 years old. I just used the self-cleaning feature on the bottom oven and now it wont work at all. I understand that this is a common problem with Whirlpool ovens and I will never buy another Whirlpool appliance again. What a piece of junk! I have used self-cleaning on my ovens ever since they were invented and have never had a problem before.

I purchased the Whirlpool Cabrio, Model no. WTW5640XW2, on March 3, 2012. I have tried every setting and water temperature and am totally dissatisfied with the washer. It does not clean clothes, tangles them into a twisted mess which requires that they be vigorously shaken out, destroys anything with a draw string. I had an online chat with a representative and was told she was sorry. I posted to Facebook and did receive a call from a repairman, which I will return; however, I do not anticipate receiving any satisfaction. The machine is worthless for washing clothes. I was better off with my 12-year old agitator Whirlpool washer. I do not understand how this machine can be allowed to stay on the market. Id be better off at the river beating my clothes against rocks. I hope someone will get on Whirlpool to give consumer refunds. I have been brought to tears by this machine and I am one tough cookie. Please help!

I count myself as lucky... my Whirlpool 465 Accubake Ceramic Cooktop stove was given to me. I have used it for 3 years. One day, out of the blue, the oven, which was in use, started clanging loud and jumping up and down. I started screaming & tried to cut it off & it would not go off. I ran to the panel box & threw the breaker. It also burned my food that was cooking. It did it several times. Then I decided to not cut the light on or touch the button to raise the temp. It has not done it since. I bake everything on 350 degrees and immediately throw the breaker. I am scared of this stove and plan to replace it. I will NOT buy a Whirlpool, anything. (washer/dryer/fridge/aircon)....once bitten...

We got our Whirlpool french door refrigerator with freezer on the bottom (Model: GX5FHDXVY04) in June 2010. In the past six months, the refrigerator portion loses cooling and temperatures go to the 60s or 70s. We found out that by turning the unit off until it defrosts, it will work again for awhile. Weve had water overflow on our wood floor. When this happened the third time, I called Whirlpool to send a repair person.The person I talked to said it could be over $400 to repair and that it would be more economical to get an extended warranty for about $314, which I did. I did not receive the contract via email (it may have gotten lost in spam). The repair man came and said yes, this was a common problem due to a design flaw and that it needed a $6 part to make the water drain smaller - so that too much air didnt get in.It was May 1st before the repair could return to install it. This was done and we thought - expensive but its taken care of. Today, May 5th, the same problem happened and I have to throw away food again. Its the weekend and there is not a repair person available for two weeks - I got an order number and may request that the repair come sooner. To add insult to injury, I found out that the extended warranty is good only up to $450 and not good for any repair that might be needed in a year. Most of the repair goes to travel to get to Fairfield and labor and we have used most of the warranty already.

I had a Whirlpool Natural Gas Water Heater professionally installed on 2-27-2107. This unit came with a Honeywell controller and thermopile assembly. Today is 05-18-2019 and the unit is not inoperative. The pilot is lit but the burner wont light. Here are the issues that I have come across so far: When I go to the Whirlpool site there is no direct link to Whirlpool water heaters, just kitchen appliances and washer/dryers. When I click on parts and accessories link it gives links to washers, dryers or pedestals. Again... No information about water heaters. I scroll down to the bottom of this page and I see a link to All Replacement Parts When I click that it takes me to another site managed by RepairClinic. When I enter the model number for the water heater it says Not Found. I entered the part number for the thermopile on the tag on the orange wire #321165-002 and 100078039 and again it returns as Part Not Found.Its obvious that Whirlpool is putting little effort into supporting their water heaters or their customers. I called their support line and they were able to order the thermopile assembly for $55 plus $27.95 in shipping to get it here by Tuesday. Today is Saturday. So that means almost 4 days without hot water. And since this water heater was a warranty replacement for a previous one that went bad they will not cover the cost of replacement parts for the thermopile. Lesson learned: No more Whirlpool purchases for any of their appliances.

I have a front load Whirlpool Washer and it has leaked within 6 months of having it. The rubber piece was replaced and it still leaked. Whirlpool wont take responsibility for its product. I have to put towels down around the washer every time I use it because it leaks. I purchased this because it is more economical to use a front load but not when water is leaking from the washer.

2020 Maytag washing machine purchased Sept. 19 2020, never worked from day one. Agitator does not work, makes noise like the machine is struggling to work. Does not rinse detergent out of clothes. Water level is minimal. Went to the dealer Dufresne in Swan River, MB. They sent out a repairman which I paid for, I was informed many customers were complaining that these machines are nothing but garbage. I went back to Dufresne and confronted the sales woman, laughed in my face and told me to leave the store, I was totally taken aback by her rudeness, phoned Whirlpool, spoke to a woman who was very ignorant, I asked to speak to a supervisor who told me thats the way the machines are designed because they are made, DO NOT BUY WHIRLPOOL APPLIANCES, NEVER NEVER.

I purchased a Whirlpool washer in 2005. After the extended warranty expired, our washer broke. The Whirlpool manufacturer did not have parts in stock. It’s on backorder, so what does that tell you? So we have had to wait for over a month for the repair shop to receive parts from Whirlpool’s manufacturer. Service is very slow and the quality of product is very poor. After five weeks and no repair parts, we are going to have to purchase a new washer since we do not have our washing machine repaired yet. I promise to never purchase a Whirlpool product again.

Whoever came up with the idea of this AquaLift oven cleaning method should be fired! This method does not work. Ive barely used my oven but had some cheese pizza drip on it so thought I should clean before using again. What a JOB! The spill did not come off the bottom entirely and using the non-scratch scrubbing sponge was a joke. There is some soil on the sides and back of the oven that I will have to use elbow grease to get off and Im going to have to crawl into the oven to see if they can be remove. Welcome back to the old days before self-cleaning ovens!

Having spent over RS 40000 on a so-called quality product one does not expect to spend nearly 20000 within the first two years of the purchase. 1. As soon as the warranty got over the PCB (costing 3000) broke down. 2. This replacement had a 3 MONTH warranty. Exactly after 9 months again the PCB breaks down along with leakage of gas. The service team asks us to buy a stabilizer to ensure that no such issues occur as they attribute these breakdowns to voltage fluctuations which are not of any precedence in Delhi. Also the product I am using was sold to me as a stabilizer-free working. 3. I made the suggested investments 4 months later the fan and motor of the freezer stop working. Imagine so much repair work on a new equipment. I have been writing to them yet all that they say in response is we are looking into the matter. NO ONE SHOULD BUY WHIRLPOOL REFRIGERATORS.

We bought a new side-by-side refrigerator (GSF26C5EXB00 26cf) with water and ice in the door. We have had to replace the built-in water filter every two months at $30+ per filter. This is unacceptable. We just want to know what to do to fix this problem. There is only one person who uses the ice maker, and no one uses the water in the door.

I have many rentals, and for over 39 years have always bought Whirlpool dishwashers for them and my own home. I have noticed over the last 15 years or so they are getting more and more poorly made. First I quit buying the plastic tub ones because they collected mold on the back. Then putting one in a rental, we went through 3 brand new ones that all leaked before we got a good one. Now, I bought the very best for my home 2 years ago, had the pump replaced under warranty due to leaks. Now, the plastic upper rack wheel has snapped off its plastic base. For under 30 dollars you get a replacement kit for it, that is all metal. So why didnt Whirlpool just put in the metal ones and charge a little more. So this will be my last Whirlpool, and all the brands they make. Do your research, many of the name brands you know are all made by Whirlpool.

When washing towels or a blanket or quilt, anything substantial it wont spin the water out of the laundry. This washer is only 5 months old.

We purchased the pair a year ago and its been nothing but headaches. First of all, half the clothes dont even get wet. They say its high efficiency but I dont think theres any efficiency when it doesnt even wash them. Second, when it actually does wash them, it leaves detergent all over the clothes. Imagine your black dress pants with white bleach like streaks all over them. We called because we were under warranty and a repair man came out. Totally useless. He said because its high efficiency, its supposed to do that. Not clean my clothes?? Why would I have purchased a WASHING machine that doesnt clean clothes?? Is there some other use for it Im unaware of?? He told us to try using deep water setting and extra rinse. So now we can wash 3 pair of socks at a time instead of one. Yippee.Do NOT BUY THIS CABRIO WASHER, UNDER ANY CIRCUMSTANCE. Youd be better off with a plastic bucket from the dollar store. If you get it as a gift, the person who bought it for you may secretly hate you. I wish wed had the benefit of these reviews. Now were out $1500. Will NEVER, EVER BUY A WHIRLPOOL PRODUCT AGAIN. Not only does it not work, they refuse to recall it or refund it. Off to the laundromat to WASH my clothes.

This washer has no agitator. Drum will shake back and forth while load of clothes will stay in the same place sliding towards the opposite direction of the movement for 20 minutes. Clothes are not turning, no going up or down, just staying still and not getting washed as expected. Baseball cap and construction worker jeans didn’t washed as it should have been.

We were looking for stainless steel and this model was that. This model has lots of presets which we like. We lucked out and got it on sale and were able to get features of a more expensive model for a lesser price. The only downside is getting the turntable back in when you clean it. One of the things I wish it had was a way use the timer for foods cooking in the microwave plus use the timer separately for timing food you arent cooking in the microwave, but will be part of the meal. Also, the defrost options could be clearer!

It is a really great microwave, but the door is falling off of it. We can still use it, but try to be careful about it. I honestly and truthfully love my whirlpool microwave as well as my whole set of whirl pool appliances. The door is trying to fall off, but we can still use the microwave. If we get another one we will probably get another whirlpool because I love it so much.

Purchased a Whirlpool French door in April 2020 during the pandemic for 2K. The first week of owning it my fresh vegetables froze. I lowered the factory set temperature by one degree. The next week the ice maker stopped making ice. 3 days later it started up again. The 3rd week my freezer food defrosted and the ice maker stopped making ice. Called Whirlpool And requested a refund. They said, No we will send a tech. The tech determined the control board was defective. I had to empty the entire fridge and turn it off, defrost it for 24 hours. The headache to find someone to take your food! The part took 2 weeks to get replaced.The tech said, If this doesn’t work we will have to come back and take the back off to see what the issue is. Told to defrost again for 24 hrs. The ice was so thick we did it for 48 Hrs. 1 week later ice started to form in the freezer and the ice stopped working again. Called whirlpool demanded a refund and they said no. A tech will come again. I’ve relocated my food 3x already. How many more times can I do that! Whirlpool is not concerned about their reputation at all, as I read through other reviews of situations similar to mine. Do not buy whirlpool!

Like many other reviews Ive read here this morning, I bought a Whirlpool Cabrio HE Top loading washer before I did my homework. I purchased approximately 2 years ago. While I dont seem to have the volume of complaints Ive read from others, I do have many intermittent complaints. As others have described, from day one I have gone from this uneasy feeling about how it is working to down right POd about the condition of my clothes after a load finishes.List of issues you will avoid by buying a different product: 1. Water levels SO low your clothes dont get clean. Yes Whirlpool, thank you for trying to save me $$ by lowering my water bill, but for goodness sake there should be enough water in the damn tub to cover the load. I literally watch dry clothing twist back and forth and NEVER go out (like they claim) to the edge of the tub and under then back up in the center. Instead they just sit there watching from the edge while the poor items of clothing in the center get twisted together.2. Powdered detergent, even if listed as HE will not dissolve in this low water level and will end up as white patches of film on your dark clothes. Suggestion to avoid this - dont use powdered detergent, but even if you use liquid HE detergent, you may still experience white patches of soap film on your clothes. It happens on all of them but shows up clearly on dark clothes. Setting the washer to always do a 2nd rinse cycle will improve the outcome. Not a perfect solution since the point of a low water washer is to use LESS water and not more by running a 2nd rinse on all your loads.3. No Consumer/User options to allow you to use the washer as you see fit. Since I paid a small fortune for this stupid washer and didnt realize that I would never again be able to dye fabric in my washer I am posting this as a warning to other crafty consumers. DONT BUY THIS WASHER if you ever want to dye fabric or an article of clothing larger than underwear. There is absolutely no setting on the washer cycles that will fill the tub with more than a few inches of water. The washer falsely has a mislabeled setting called Deep Water Soak. This is absolutely a LIE. Good thing I tested the cycle before putting my blanket in there to dye it. The cycle spins many times in the beginning pouring water into the clothes, then empties the tub and does it again. Then after 10 minutes into the cycle it begins to fill (if you want to call it that) the tub.After putting about 3 inches of water in the tub - not even enough to cover the top of the articles in the tub (I used 6 towels as my test subjects) it stops to soak. But stuff is still sticking up out of the water!!! OMG! So frustrating. This would not do for dyeing anything of value as you would not be able to agitate enough to ensure coverage of the fabric evenly with dye. Just dont buy this washer if you have, as I have in the past, enjoyed changing the color of linens and re-dyeing dark clothing that have faded! Whirlpool clearly didnt care about how consumers actually need to use the washer. I may try using this setting by pausing and filling it manually with buckets of hot water from my sink to get enough water in there to cover the fabric. Its just ridiculous that I even have to consider how to outsmart my washer!4. Smelly clothes. Seriously. I do the obligatory monthly Affresh cleanings, and I have learned to leave the lid open after the last load of clothes so the tub can air dry. However, I still from time to time pull a load out of the tub and it smells like mildew. And dont think for one second that the smell will go away when dried. I have opened the dryer and pulled clothes out, smelled the mildew and put them right back in the washer for a 2nd go round. Nothing worse than putting on a clean nightgown and smelling like mildew! Ewe!! With this awful washer you can NEVER leave a load of washed clothing sit for any length of time or you can look forward to smelly clothing. Hate it. Absolutely HATE it. Again, this defeats the purpose of using less water.Cant make myself spend more dollars that I dont have in the budget to replace this piece of crap. I have figured out all the workarounds for now, but as soon as I can replace it I will send it to the dump. Not going to resell or donate to anyone else as it would just be a burden for others. If there was ever a rightful need for a class action lawsuit to compensate consumers for false claims by a company - this is it! Hope this helps prevent anyone reading from making the poor purchase decision I have!

I bought three top of the line 40-gallon Whirlpool electric water heaters from Lowes three years ago. One of the three heaters has already developed a leak. I contacted Whirlpool only to find out that they wont do anything to diagnose the problem. I have to pay labor for someone to come out, diagnose the problem and then pay for the labor to either correct the problem or replace the water heater. By the time I pay the labor costs, I could almost buy a brand new unit.

Im with the rest of the people on here... The only mistake I made was not checking the reviews before purchasing a Whirlpool product. My washing machine is horrible... I dont recommend anyone purchase any Whirlpool products. Its cheap and has already stopped working twice in the last 6 months... I have had a repair man come out twice to replace the door locking mechanism... Not to mention the buttons dont work, they just slide back into the machine... Plus, you have to jump through hoops just to get the machine started the way you like it... If you make a mistake, there goes your whole ** load of laundry, not to mention the water wasted. Hell with Whirlpool - Dont ever buy a whirlpool product as long as you live.

I am very sorry I bought this machine. CU rated it pretty good. Nope. 1 - It rarely dries everything completely. e.g., the collars of t-shirts or turtleneck shirts are damp after the load is finished. I have to run the machine again....Energy efficient? Energy schmefficient. and I havent even TRIED to use the low heat delicate cycle. 2 - The cute modern buttons are hard to push in. 3 - The top of the machine doesnt have a level lid... Its curved. Not very useful for setting anything on while you work at any part of your laundering process.

I had an upscale Frigidaire suite of kitchen appliances and I loved them. A few years later I moved and needed a new set. I thought Whirlpool was about the same and I bought a Whirlpool set. The stove wont boil water or even fry an egg. It heats up and cuts off continuously. I called a service rep out and he called the engineer who told him it is designed like that and I need to use hot water on the stove to boil it. I was shocked at his ignorance and insulted by his stupidity. Ive been cooking for 60+ years and everyone who cooks knows you use cold water to boil water. But really, the stove does not cook anything. When frying eggs the burners cut off every few seconds to the point you cannot cook anything with it and the engineer said thats the way they designed it. DONT BUY WHIRLPOOL. THEY WONT EVEN BOIL WATER. HORRIBLE STOVE AND ONCE YOU HAVE IT YOU ARE STUCK WITH IT.

Microwave Hood Combination...moisture sensor failed...potato caught on fire. Service company Whirlpool sent failed to show (Whirlpool selected a repair shop over 100 miles away). 2nd service company told me sensor failed and they would return with new part (ignoring the fact the white microwave was not gray and black) in a few days. If I wanted a new microwave without the dust and ash, I had to call Whirlpool. Whirlpool is ALWAYS experiencing a high volume of calls.Whirlpool states 7 - 14 days (unit on back order of course) for the microwave will arrive. 21 days later..no microwave. More high volume of calls... Whirpool state a repair center has received the microwave on July 31st and should have called me. Said repair center has no record of this transaction. Whirlpool reps claim to have records of my claim...but... they keep asking did we tell you it had been handled? I say read my file... Customer rep says my file is hard to understand (i.e. it is long). But they assure me they are empowered to help me. Maybe they should look up that word.Today...it is not Whirlpool customer service fault! No... It is being handled by a Product Replacement Specialist... Sadly they cannot provide me with any contact info for that Specialist. Empowered but not informed! Lesson: Whirlpool dont buy or if you do... and it catches on fire...just buy a new one... They make it impossible to get a replacement.

Thrilled with my first experience (9 years now) with my Whirlpool glass-top range/oven. Truly LOVE the modern look of glass cooking surface which cleans up like a dream! NO harsh abrasives needed, always WIPES shiny and beautiful. All-electric...no stinky gas fumes. Wonderful features... Computer controls, SELF-CLEANING OVEN. Now, if only it would do the prep-work.

We bought the Whirlpool refrigerator from Home Depot. The ice maker does not work. We get 2 cups of ice a day. Home Depot Told us we should get 8 to 10 pounds of ice a day. We call a repair service and they said we should get 2 pounds of ice a day. Still getting 2 cups a day. Call again and now they said we should get 64 cube of ice a day. So now Home Depot has us calling Whirlpool instead of them. Now we will have another repair company coming out. Waiting to see what they have to say.Very disappointed with Whirlpool for not backing their refrigerator. And don’t buy from Home Depot. You can’t return if you buy it. And I have a warranty on it and they have a lemon law 3 repair calls for the same thing and they will take it back. Not true. I will be calling once a week for 5 years until they get me some ice. They don’t deserve a 1 star.

I filed a complaint late Oct. 4, 2011 about a problem I was having with one of my Whirlpool water heaters. Chris from Whirlpool emailed and phoned me twice within 12 hours! He was courteous and very helpful. He shipped the parts that I needed overnight. They came in this evening, I installed them and everything is working great! Thanks to Whirlpool and Chris, we now have hot water!

Please DO NOT purchase an appliance with Whirlpool. I have had my double oven WiFi for 7 months. It has worked great. They did a update on it and I have had an hour glass for 2 1/2 weeks but the crazy part was they sent me a part, had it expedited 2 day shipping on a Friday and I didn’t get till Thursday of the next week. Go figure. So they send a new part and guess what? It’s broken and my oven doesn’t work once again. The other part is they have to wait for the code on the error 3-5 days. One we are going on week 3 with no oven and at this point I call and tell them my husband can run to Lowe’s and take a control panel off a new stove and put it on or better yet something is wrong with this oven. I need another oven because at this point I’m extremely pissed. Please DO NOT buy any products with this company. They SUCK!!!! They should replace it and pay me for all the meals I have had to buy.

I exchanged my fancy front loader Cabrio washing machine for a top loader after having numerous issues: clothes werent getting clean, extended water cycle, and a leak. The original purchase was made at Lowes, where I elected to invest in the 3 yr extended warranty plan. After several visits from their sub-contractor, they allowed me to exchange the washer for a top loader Whirlpool Cabrio. At first the washer seemed to work, but after about 8 months I started having problems. The bearings went out and when the service company replaced it they forgot to screw top of the machine together. During my first load, I heard this terrible noise and discovered that the entire top of the machine had separated from the bottom by 2 inches. I frantically rushed to turn the washer off before my laundry room flooded. So, they were out again and screwed the machine back together but failed to retrieve the original screw that they removed from the washer during the first round. Well, the screw got lodged in-between the drum and interior, causing it to completely break the machine. Lowes agreed to exchange the washer for another top loader Cabrio, but my 3 year service contract would not cover the new washer. Not to my surprise, I immediately had issues with it and had to hire a repairman to assess the problem, who concluded that it was the bearings. He informed me that it would be about $700 to replace the bearings and cheaper to just buy a new machine. I called Whirlpool and explained to them about all my issues, now becoming almost comical. They arranged for an outside contractor to assess it. After confirming that the bearing were bad they replaced them. Another few months go by before problems occur, this time the washing machine stopped draining water and spinning. The service company was out another 4 times. They replaced things like the mother board and control panel. My last appointment was today, where the service guy said, There is only one error code. It is a stuck button. I said, Will you at least witness a full cycle so I can show you all my problems: clothes still dirty and stinky, items still wet after spin cycle, cycle taking 2 to 3 hours to run, horrible noises, and timer adding minutes to original cycle. He called Whirlpool because he genuinely felt sorry for my situation. They were of no help. He didnt stay to witness a cycle. Moral of story: if the error code doesnt detect a problem, the consumer will not be helped (this is something that consumers do not have access to). They will happily call a technician out to put a bandaid on an issue until your warranty runs out. I have had between 7 to 10 service calls out to my house, requiring me to take either an entire or 1/2 day off of work each time. If I added up all time lost at work, I could have easily purchased a top-of-the-line washer/dryer duo and been done with all this Whirlpool foolishness. Do yourself a favor, stay away from this product.

I purchased a Cabrio washing machine and discovered multiple repair issues over the last few months. I have had to replace a pump for $85 and now the machine will not complete a cycle. I found out the the whole thing is rusted above the barrel which is causing a leak in the back and leaving our floors covered in rust shavings. From my research and reading others reviews and issues, they pay for a serviceman to come out and still it does not solve the problem. My husband is a student in college and we are living off student loans. We bought this machine because we trusted that a Whirlpool would last and be a good investment. I am very displeased on this machine and doubt I will ever put my trust in Whirlpool again. I called to complain and got the typical response I have read others got. I am not paying for a service call when it will not fix the washer in the end. I plan to file complaint after complaint and encourage any class action suit against Whirlpool for producing a poor washing machine and misadvertisement on this machine. I will move forward in this. I feel that as consumers we have a right and should have a sense of ease when you spend $900 on a product that it should work and not give out as it has so quickly. If there has been multiple people with common complaints, then there should be a recall on this washing machine.

Mine came new with the home I purchased 3 years ago and so far I have had no problems at all. The only drawback is that if it is on, you can hardly tell it is running so if you forget you might interrupt the wash cycle unintentionally. It does an excellent job on dishes and the stainless steel front is easy to keep clean since there are no mechanical knobs or switches, you can just wipe it down and be done in less than a minute.

I purchased a set of Whirlpool Cabrio Washer/Dryer. After 12 uses of the dryer, it doesnt work and now I have to pay for the service. I didnt think Id need an extended warranty since my other 2 brand name washer/dryers lasted 15 years!

I am so unhappy and frustrated with this washer by far worst washer I have ever had!! Doesn’t wash clothes clean. Sometimes I have to wash things 2-3 times and then they aren’t necessarily clean. For what I had for this pair I really got ripped off!!!

On 12/27/2013 I bought a Whirlpool hot water heater from Lowes Model NU50T122-403. On 12-13-2015 the pilot went out. When I called tech support on 12-14-2015 they gave number what were call centers or person who returned the calls. So I called a local plumber that I used before. He came out and told me that had to replace the pilot. On the 16th 2015 of Dec. that did not work and told us the heater needed to be replaced. The replacement will happen today I hope with little to no help from Whirlpool. I would advise you to do your homework before you buy a Whirlpool hot water heater.

My Whirlpool Microwave is cracked all around the door handle and the frame with the insulation foam hanging out of the cracks. Dishwasher also having issues. Completely dissatisfied with Whirlpool Appliances. No longer under warranty.

Eleven months after purchasing a Whirlpool refrigerator for our office lunch room it stopped working. While the refrigerator was still under warranty, I called Whirlpool for a service call. I was informed that the warranty is voided because the unit is located at a business and not a residential property. I explained to the customer service agent that there is no mention of this policy until after the appliance is purchased. After a considerable amount of time on the phone speaking with several supervisors, I was connected to a Resolution Specialist. She informed me that this policy is available online for consumers to view prior to purchasing Whirlpool appliances and it is the consumers Due Diligence to research warranty policies before purchasing. Consumers beware! Warranties are voided on all Whirlpool appliances that are located at a business address.

My stove is good, I have gone through 2 refrigerators in less than 8 years and the replacement is having issues. Service is a joke, customer service is questionable but trying to assist but at this point will not recommend whirlpool products.

Less than 3.5 years use on a 2015 Whirlpool dishwasher...total costs to repair would be $600. This just to let other know. Whirlpool did nothing for me when the same issue showed 15 months after purchase and again 18 months later. Absolutely horrible experience. I dont want them to contact me and I post this as a warning to others. They just want to sell you high priced service contracts. Terrible dishwasher and even worse customer service.

Late on the evening of Monday, January 27, 2014, after springing a leak in my 8-year-old water heater, I purchased a new Whirlpool model N50T61 replacement from Lowes. Installation went smoothly and the unit lit off fine the first time. It heated the initial tank of water rather quickly, but the next morning, I noticed the status light on the control unit was not blinking, which indicated the pilot light had gone out. I relit the pilot light, the water heater fired off and appeared to be working properly. 12 hours later, the status light was out again. I relit the pilot, but within 20 minutes, it went out again.On Wednesday, the 29th, I called Whirlpool customer service and explained to the representative what had been happening. He stated that since the status light was not blinking a code, the problem was either an air supply or venting problem, and he couldnt help me. I relit the water heater again and performed the match smoke test described in the owners manual on the vent connection. It did exactly what the manual said it should do, so I assumed that was not the problem. However, while performing this test, the water heater went out again. This time, being right there when it shut off, I saw the status light blink twice about 5 or 6 times before it quit blinking all together. The two blink error code indicated low millivolt signal from thermopile.I called customer service again and explained to the representative what the first person had told me and also told him the results of my test and that this time, I had observed the two blink error code. He asked if I had a multimeter (which I do), so he had me disconnect the wires for the thermopile, connect the meter to the wires, light the pilot and read the voltage. My meter is an old analog unit, and not capable of reading millivolts (which is what the thermopile output is), and I informed the rep of this, but he had me do it anyway. As I suspected, I saw absolutely no reading on the meter. The service rep stated that he believed the error code and decided to send me a new thermopile assembly. However, their shipping department was closed for the day and I should not expect to see the new part until Friday. This was unacceptable, but he stated that this was the only option available to me.After thinking about this situation for a while, I again called Whirlpool customer service and told the representative that I was not satisfied with the solution previously presented to me and that I wanted a return authorization to take the water heater back to Lowes for replacement. The rep stated he couldnt do that, but said that there were a couple other things I could try. He attempted to explain these procedures to me, but wasnt able to do so clearly. He stated he would email the instructions to me. As of this writing, I still have not received the instructions.In the meantime, I did some internet research and found that Whirlpool water heaters have numerous chronic problems, including the issues I was experiencing. I decided this was not a product I cared to own. I called the Lowes store where I purchased the water heater and spoke with the manager. I explained the entire sequence of events to him, and he told me to bring the water heater back for a full refund. Since my local Lowes store only sells the Whirlpool brand, I took the money and purchased a different brand of water heater from another home improvement store. Needless to say, it will be a cold day in hell before I ever purchase another Whirlpool product.

We bought a new stove from Lowes in 2015 which is a Whirlpool with an AquaLift self-cleaning function. This function is totally useless. We have tried it several times and it does not remove the grime from the oven. We did not even have a very dirty oven. It doesnt clean the sides at all and the bottom is still dirty. I complained to the store and they told me the AquaLift function should be used every time the oven has been used. They recommend that I use a spray for the oven (which is porcelain) and scrub off the dirt. Give me back my old self-cleaning oven with the high heat. This new technology doesnt work.

We moved into our new condo a few months ago and my wife noticed that the knobs and front of our new Whirlpool Stove were getting too hot to touch so we called Whirlpool and since then never used stove. Was over one year old, we had to call their factor service representative. The charge was $98 plus labor $90 to tell us that even though the surfaces were way too hot to touch and dangerous to touch they were still within the factory specs of 167 degrees for the knobs, 152 degrees for the drawer, and 172 degrees for the front glass. He found the front of the unit reached 152 degrees which was hot enough to cause a serious burn when the stove was only set to 400 degrees. Why would a company set specs that will cause serious injuries? If my wife or grandchildren get burned by this crappy stove Whirlpool will be hearing from my lawyer. Stay away from any Aquaclean Whirlpool stove.

Whirlpool Cabrio. A little noisy, 2 or 3 years, do exactly what the manufacturer says they will do. Start them up, run them, go get the finished product... The previous set, same brand lasted us 15 years and then went on to help someone else. Still have the same dishwasher, Whirlpool, 11 years, no repairs, no breakdowns. Bought refrigerator, and micro-wave also, several years back. No problems, no service calls, no stops.

I did not purchase the washer (Cabrio Top Load Clothes Washer) but inherited it in a home sale. Never had a non agitator. I was excited for this new washer. After a week I knew why they left it! My clothes did not seem clean; stains were still on them, when I used the delicate cycle a pair of pants went in folded and came out folded!!! I also would have to redistribute the clothes every time I had a load that was larger than five pieces, because it would stop. I would actually have to take clothes out and spin what was remaining then put those in the dryer and put the other clothes back in and spin those again. I was told I needed to use OxiClean on top of my normal detergent in order to get my clothes clean. Never again will I purchase a Whirlpool. Just bought an LG; fingers crossed.

We purchased the Whirlpool Cabrio washer and Dryer May 2017. First, this washer is SO LOUD! Honestly, NEVER had a washer that is this loud on the spin cycle. My second issue is, that when I wash my blacks, they have white splotches streaks on them. I use ALL clear and free liquid washer and Downy softener, so I stopped the softener, and still the white streaking. Ive since will use the additional rinse on during the wash, but still leaves white streaks. After 3 separate rinse cycles, no streaking. This leaves me thinking that with the lighter colored clothing, there is probably streaking as well, just can see it - my conclusion is that the clothes arent getting cleaned properly, or rinsed. Another issue is the dryer. First, takes longer than all my previous dryers, even the set 110 mins for towels on high, still takes longer. My washers are not packed tight with clothes either - its just my husband and myself - not a lot of washing. Also, I noticed a crack in the inside dryer/drum where it looks like the paint is chipping and cracked. I used some high heat touch up paint, and it did not help. Needless to say, what I thought was an good reputable product, turns out to be, not so good.

I have always used Whirlpool products and have grown up with them. From washing machines to dishwashers. Not only is it made in the USA but its reliable. The only problem is space and it can do with more freezer space. Other than that its a great refrigerator.

Horrible stove. Bought online. Get set up and its worst design ever. Have to lay down on floor to watch broiler. Cant even slide out. The stove top is difficult to clean. The cast iron grates are very heavy and have to move one side at a time. I Cant control low heat. Have to use back burner only. Then Crap builds up on back console. The oven grates are too wide apart, Have To supplement with racks from my other stove oven.

Hi Folks, so today I had the pleasure to speak to Whirlpool regarding a repair bill on our washing machine which now has a bearing failure and estimate to repair was 1279.00. Its 6.5 Yrs old, just out of extended warranty and cost me with the pedestal a total of 1250.00 when new. I explained that in the 6.5 since I have lived at this house where we spend all new Whirlpool Gold Appliances, half have now failed. Range Microwave, Dishwasher and now the 1250.00 front loader is dying a slow and agonizing death with a bearing failure. Just so everyone understands, the estimate is from an official Whirlpool repair service that was booked through the Whirlpool website. Other repair folks just would not bother to look at it when I told them I believe the bearing was going bad.The repair man that arrived was professional and on time. However, I had a hard time understanding how a 6.5 Yr old washing machine would be considered beyond economical repair by costing 1279.00 to repair. Labor was 250.00 which I thought was fair. Time, etc. But parts made up the difference in cost. So later in the day, I spoke to Whirlpool and they offered the equal new washer for what would seem an excellent price. About half off. Wow, I thought that sounded good. So I asked if my existing pedestal would work with the new washer and it did not and I would have to pay for one. Regardless if my old one was fine or not.So, they offered a discounted rate from new at another half off. Total approx 800.00. So, I asked the Whirlpool rep to hold on and I need to check with my wife if she wants the replacement. She uses it as much as I do and wanted her thoughts. She checked the model on the washer and pedestal and with the local Home improvement store, they have it on sale for both units (washer and pedestal) and its about 50.00 less?Consequently, I called Whirlpool back and explained that it does not move the needle to regain my trust as compensation on a 6 yr bearing failure, failed dishwasher and range microwave they offer what a distributor of their product can offer for less as a package? Really? I mean, the Home improvement store is not in the business to lose money. Now, I am having a hard time understanding my own failure to have trust in a brand I used to have with my previous house.My mom had an old Whirlpool washing machine that lasted 25 years before she and my dad gave it away. You know, the old white top loader they used to make back in the 70s. Sheet metal, made a racket and never broke? Oh yeah got the clothes clean too! I dont know what to make of it anymore. So, I will just wait till it dies and take my hard earned money and spend it on another brand in my next house which we are going to move to soon. Maybe I can feel nostalgic and find my moms old washer. Its probably washing someones rags right now and getting them clean. It must be 35 yrs old by now.I dont expect to get anything for free. Its out of warranty, so I need to deal with the consequences, but there are steps the other party can take to help remedy the situation. I think they tried and it was genuine but in my thoughts its just not enough when your local box store is offering the same. When you develop a brand to extend a message of trust in quality and value, you need to have quality and value all the time. I suggested they help with the costs on the parts. I would certainly pay for the labor. Parts cost little to the manufacturer. Unable to help that way. I thought it was cheaper for them too. Guess not. Its come to be a throw away washing machine at 6.5 yrs and I am Infinitely disappointed. I just want my washing machine to work as well as my mothers old one and have the possibility to fix once in a while when needed.