The smell from the washer has gotten so bad we have to keep the door closed to our laundry room, or the smell will permeate the whole front part of the house, as it is we have to keep the door to garage which is adjacent to laundry room open to air out laundry room. Our friends and guests, are aways telling us we have water leak or something mildewing, or rotting in our house. The washer works well, and I cant find any buildup. We frequently run it through clean washer cycle, it smells OK for a hour or two, and odor returns!

I bought refrigerator in Feb 2017. Within 18 months internal surface got crack, contacted customer care but I would say Whirlpool India customer care department is worst across world, no courtesy towards customers, contacted them over phone very bad attitude, no response on email. Product quality is worst, its better to buy Indian brands. They are much better in quality & service. Totally dissatisfied with Whirlpool approach, at the end Whirlpool customer care is not at all bothered.

My girlfriend lives in Europe and bought a Whirlpool stove and countertop burner. She was washing dishes and heard a sound like a crack and she looked around the kitchen to find out where it came from. She looked at her stove top and there was a vertical crack down the center of it. It was turned on, no one was using it but it cracked. She tried to get a replacement glass top and the store told her they were not available. I sent an email to Whirlpool to find another one and never heard back from them. I sent a second email and that was left unanswered. After this I would never buy another stove or stove top made by Whirlpool again. Knowing that KitchenAid was bought out by Whirlpool these comments dont surprise me one bit. Whirlpool is another name for poor quality and no service.

I’ve purchased a front washer and dryer and storage units, directly from Whirlpool. When the delivery people installed the units, they did not install the rubber gaskets that are required between the units. I’ve purchased rubber pads from Lowe’s, but the washer still shakes uncontrollably. What do I do now?

My family purchased a Whirlpool stainless steel dishwasher at Lowes for around $500. We were replacing a very old GE dishwasher which was so loud you had to leave the room anytime you started it because you couldnt even talk over it. We love the new Whirlpool dishwasher. It is so quiet we thought it was broken at first because we couldnt hear it running and even though it cleans exceptionally well we still sometimes have to look to see that the light is on to know that its actually running. The whole family agrees this may be one of the best purchases weve ever made. The only con I could think of is my son and I put the dishwasher in ourselves and this is the first one weve ever done and the instructions werent as clear so we had to redo the piping of the waterlines a couple of times to figure out in what order to be done. But everything hooked up correctly and worked immediately without a problem. Couldnt be happier.

Within 10 days of installing our new Electric range the cooktop does not look new and although we have used the prescribed cleaning methods, will not remove some cooked on spills over one burner and another burner has white rings around the glass above the dual zone cooking element. While we did not choose the top-of-line model; had expected much greater durability and appearance for our new range. My call into Whirlpool service made me feel like mine was an extremely isolated case and yet nothing would be covered as would be classified as customer fault. Highly disappointing as the cooktop on the range that we replaced seemed so much more durable.

I have to wiggle everything just to get thru a cycle on my brand new dishwasher! It fills up and works great when it does work. No prob! But it takes a good 30 minutes to get it work and I walk away come back NO WATER! Sometimes I have to unload it just to wash them myself! Now Im going back to purchase place and return or have repaired. Less than year old, repair free?

I had a 14-year-old 40-gallon tank that was working great but I decided it was time to get it replaced. I picked out a Whirlpool 400-gallon tank stated to be good for a family of 3 to 4 people. Immediately after installation, I got complaints from family members that there was no enough hot water for morning showers. I turned up the thermostat to the maximum 140 degrees, but there was still wasnt enough hot water. The Whirlpool rep on the phone stated that 3 people cant take back-to-back showers. The unit wasnt designed for this. I told him the unit is advertised for a family of 3 to 4 and I have only 3. I asked where on the advertisement does it state 3 people cant take back-to-back showers? His response was, Where does it state you can? I asked his name and he would not give it to me. If 3 people cant take showers on a unit stated to be for a family of 3 to 4, something is wrong. Maybe it should be advertised as suitable for a family of 1. I will not buy a Whirlpool product again and I advise others to take my advice, go elsewhere.

Hi. We purchased a french doors 32 cubic feet refrigerator from Home Depot in January 2017. Since day one it has not worked correctly. We have dual ice makers and neither one works. The fridge doesnt cool at all! Whirlpool sent out an appliance repair company who said they ordered the parts. Its been 2 months and guess what still no parts on order and still have no refrigerator. So after 45 or more minutes on the phone with them for the millionth time we came to the conclusion that we are stuck with a POS refrigerator! They refuse to swap the fridge out. They said Home Depot would have to swap it and its against their policy. (Thats another complaint department.) We will never recommend a Whirlpool product again. Never buy Whirlpool. They love taking our money and thats where they stop.

Home is new construction. Moved into our home in May 2015. All appliances are Whirlpool. The Microwave (model WMH32519CS-1) stopped heating in September 2015, service tech replaced the tube and capacitor. Microwave stopped heating again on Nov 16, 2015. Service tech notified again. Each time it takes 3+ days to get the service tech to look at the oven. This will be the 3rd Magnetron Tube in 6 months. This should not be happening. Contacted Whirlpool direct, asked if we could get the entire oven replaced with a new one. I was informed that this was not a company policy. It was a real waste of time talking to customer service. They are clueless and could care less about what is happening with our oven. I have had microwave ovens for years and have never had this kind of issue. Whirlpool has a real problem here.

I purchased a refrigerator Model# WRF736SDAW12 on 8/9/14 and from day two, Ive had nothing but problems with the ice maker. We NEVER use crushed ice, but we get a lot of crushed along with cubed and crushed/shards of ice all over my fridge, hands and floor. My daughter (wearing her heels) already slipped and fell while walking past the fridge, not realizing that there was ice lying on the floor because my floor is light/multicolored, so we cant see the ice.After several calls, the repair person replaced all the components of the ice maker and the repair person was told (2/26/15) from the Whirlpool tech that we would just have to live with the problem because its normal and he was advised to tell me to get a larger glass. The repair person looked at my glass, seeing that it was already large, shook his head and said Whirlpool must want me to start using a bowl to catch all the ice. I couldnt believe it?! I bought this fridge expecting to receive ONLY cubed ice and yet I dont, so Im sure why they put that cubed feature on there when I cant utilize it. I only want a little ice, but the first thing that comes out is the crushed ice, and in order for me to receive more cubed ice, I have to fill up the entire cup that includes the crushed/shards of ice which floats to the top and ends up in my mouth. Thats the purpose of me selecting cubed, so I dont have to drink it!After the repair man left, I called customer service (2/26/15) and she told me that ice gets stuck in the chute?, so thats why I get crushed ice, but its normal she says. How is that normal? Please read all the reviews/complaints from both the Whirlpools and on Home Depots website for this model and you’ll see this is a problem, there is a flaw in the design.I cant believe a big company such as Whirlpool would treat me so poorly and brush me off like this. After the many posts I put on their Facebook page, they over and over say they will be in contact with me. I have yet to hear from them. I found another story on Pissed Consumer where a senior fell due to the ice falling all over the floor, so its not just me that it has happened to. Theyre putting people in a hazardous situation and they dont care.I have an autistic son who gets ice constantly, I can’t supervise his every move and I’m not able to keep up with his dropped ice nor can he remember to look down for it. I’m concerned that next time my daughter falls; she won’t be so lucky and could sprain or break something. How about my visitors? Do I worry about them suing me when they fall? I’m not so annoyed at the fact that I step on water with my dry socks or the 24/7 noise from the motor or the left door not shutting all the way than I am with the safety of my family.

My wife and I tried to buy a Whirlpool refrigerator and when dealing with their customer it seemed like the left hand didnt know what the right hand was doing. My wife and I were really disappointed being that these refrigerators are supposedly made in America; thats why we wanted a Whirlpool; but we would never buy a Whirlpool now because of the way we were treated also. Sincerely unhappy with our experience!

Water heater purchased in 2011 and is already broken. Called the hotline and they were rude. Told me I need a $199 part. I read all the reviews and it seems that Whirlpool has made a bad name for themselves with the water heaters. They were not willing to work with me.

We bought 2 Whirlpool refrigerators for our new home 5 years ago. The first ice maker died 2 years ago at 3 years old. The second has now died this month. We called the repairman in who told us that Whirlpool knew there was a problem with their ice makers, but because they did not cause fires, they were not recalled. We paid $480 later for items that should last at least 10 years, not 3-5 years. We will never purchase another Whirlpool appliance and neither will any our family. A company with this level of ethical behavior that knows they have a faulty piece of equipment and just chooses to do nothing does not warrant my business.

We bought this dishwasher new from the Brick 2 or 3 years ago. It was bought not because old dishwasher wasnt working, but we needed a new fridge and stove so we also bought a dishwasher to match the new stainless steel fridge/stove. If I could give 0 stars I would. Biggest complaints: It doesnt matter what soap, what setting or how much your rinse/scrape your dishes THIS DISHWASHER WILL NOT CLEAN THEM. Its very rare it actually cleans a dish or utensil properly. If your plate had ketchup on it, it wont clean it. But if you had a sandwich on the plate and managed to not get ANYTHING from your sandwich on the plate, it would come out clean.The drain constantly clogs. We rinse everything, but the drain hose constantly clogs to the point the unit wont drain. Have to remove the unit, take off hoses and blow them out. It clogs because the strainer at the bottom of the dishwasher which is supposed to stop stuff from going down the drain hose doesnt work. If you look at the strainer and the system they use to stop stuff from going down the drain hose. Its no surprise it doesnt work. By design it cant work. My brother in law is a licensed appliance repair man. Sears actually paid for his schooling. He installed and hes fixed the clogged drain numerous times. He agrees. Worst dishwasher ever.

It was obviously designed by someone who has never had to clean a refrigerator. There are grooves in the door gaskets seemingly making their sole purpose to collect crumbs and mold with no obvious way to keep them clean (No, Q-tips dont do it). A layer of ice forms below the basket in the freezer (bottom freezer) which, when it melts, soaks the kitchen floor. Ice must be chipped out at least every two weeks to avoid flooding.

Completely disgusted and angry with Whirlpool! We own a Cabrio and just after 1.5 years of owning it the stupid washer has broke down. It wont spin or rinse or wash! Pretty sure its the bearings as I have seen several peoples complaint about this same issue! I contacted Whirlpool to only be told that they only offer 1-year warranty and after that the consumer is out of luck. They only stand behind their products for 1 year and after that its on you! They refused to help me in any way including sending someone out to look at it! Im very upset and will never buy another product of theirs! They need a class action lawsuit brought against them!

I purchased a Whirlpool Refrigerator with French Doors, Model No. GX5SHDXVD03. Within 1 year and 4 months, I had to replace the defrost control board. I spoke to Whirlpools customer service, George ** said he was sorry for my inconvenience but that he refuses to help in any way because I missed the warranty period by 4 months. I spent $352.74 for the parts and labor and lost hundreds more in food. Do not purchase any Whirlpool products. I was told that the boards have been going out frequently.

We purchased this model in July of 2019 and have had nothing but problems with it since. The design is really bad - if you set the temperature on the ideal setting, everything on the top shelf freezes solid. If you reduce the setting to the one below ideal, your freezer doesnt get cold enough to keep ice cream hard. The ice cubes are a little more than half the size of our last Whirlpool refrigerator and the unit is noisy. Weve had Whirlpool out to work on it 4 or 5 times in the first 6 months and twice weve had to throw away food due to the unit not cycling on and off properly. One of the technicians told us he spends a lot of time working on this particular model - evidently, it has a lot of issues. We are now using our old garage refrigerator while we try to get Lowes to give us a refund on this piece of junk.

I purchased a range top from Lowes and a month and half my burners go out. I call Whirlpool and a service technician came out. Said that he cant repair the stove because a bug had burned out the burners and he cant repair the stove. I call Whirlpool and they told me that voids my warranty with them even though my stove is not even two months old that will not repair it and I will have to pay for it to be repaired. I asked Lowes and they told me that they only take back big appliances back before 30 days. Now I am stuck with a stove that I paid 700.00 for that does not work and I have 4 children to feed. I am sickened on how Whirlpool can do this to a hard working family that just wants a good stove. I hope this helps another hard working family. Do your research before buying from Whirlpool. I wish I would have.

I bought an Accubake gas range. I had Whirlpool replace the top sheet metal as it was bowed, cheap & thin. A few days later, they replaced all the brass burner orifices and it all froze and would not turn off. I had to pull the range away from the wall and turn the gas off. The bottom door to the broiler is wide open and it will not close. The stop button for the oven also does not work. This company has been selling these lousy products based on their previous good reputation.

We bought this washer brand new and as soon as it was outside the one year warranty the bearing went out. They had to order a whole new drum kit. A MONTH later I had a running washing machine again. The day after it was fixed it started leaking underneath the machine. Serviceman came and looked at it and said No must be the hoses (my responsibility to fix). Nope kept leaking and two months later Im doing laundry and an entire load of water floods my laundry room. Drum broke again!! SIX WEEKS LATER I still am waiting for a new drum. I had to fight to get Whirlpool to fix it again and they wont even return my calls about why its taking so long! We are a family of 8, so doing laundry at a laundromat is outrageous! Dont ever buy Whirlpool washers!!!

Purchased the Sears Oasis (made by Whirlpool) washer and dryer almost 4 years ago and I have worked on these machines more than the Maytag machine and dryer I used for over 22 years. Electronic and mechanical problems. One recurring problem is loose change working its way into the drain pump on the washer and it knocks a hole in the side of the housing. You later discover it when you go down to the basement and find about 50 gallons on water on the floor. Very poor design! Never happened the first time with the Maytag.

My whirlpool duet was extremely quiet the first few times I used it and seemed to work well. Then I noticed that it randomly drained the clothes but didnt spin them, it did it on different cycles, and I would have to run the load again on spin and drain, another 19 minutes of run time. After a week it began to make metal scrapping sounds on the spin cycle and vibrated to the point that it moved the pictures on my walls. I called Whirlpool customer service and they authorized a service call. In short, the service man was very confrontational told me there was nothing wrong and charged me $72. It still vibrates and randomly doesnt spin. But now after he took it apart it sounds like a jet engine when it does spin. Whirlpoolss response after repeated calls? Not a new machine, but another service call......

Over the course of the 9 years that I had this hot water heater, I had to have the smart control box on top of the water heater replaced 3 times for burning up. The wires in the smart control box literally burned up and melted together. I am thankful that I was home each time it occurred, because if I had been at work when it burned up and not able to shut off breaker to it, as I did every time this happened, my home may have burned down because of it. I did just get Whirlpool to replace this hot water heater with a brand new one. However I have now paid installation costs twice. Thats not right. I had to pay a plumbing company $725.00 today to just install this new one. I bought the highest priced hot water heater that was also considered top of the line 9 years ago. I did this because Whirlpool is a reputable company and it came with a lifetime warranty. This doesnt make me happy and satisfied though when I have had to pay to have it installed twice. The installation costs more than the price of the brand new hot water heater! I also called around and did my homework first. The company that installed it was actually the lowest price of all of them.

I bought a heater from Lowes in south lebanon ohio in feb. 2013. Gas valve is bad. Whirlpool will not replace it because it was put in a utility room with a toilet in. What a bunch of crap. Their service dept. is joke.

I had purchased a hot water heater on Saturday and installed it myself. I filled the tank and waited about twenty minutes before turning the power on. I waited a couple of hours before testing the water temperature and it was cold. I checked the temperature setting and it was set at one twenty five, I went to Lowes and informed the service person and was told there was nothing they could do about it, I had to call the number on the tank for Whirlpool. I called the number and was told they could come out to check it but we would be responsible for the labor charges. I didnt understand why because it was under warranty and we had also purchased the extended warranty. I informed my wife so she could deal with Whirlpool because I was going to work. My wife called a number of times and was getting transferred from one person to another and getting no help at all. She was told by one person that it was maybe a problem with the wiring in our home or maybe the plumbing. One person told her that it was not their problem. We had to finally pay an electrician to come out to look at it and had to pay him to replace a heating element. The cost of the electrician and the part came to an extra two seventy five dollars. The only real help that we received was from Lowes managers that were willing to take the water heater back if we could get an authorization number to return the water which Whirlpool claimed they did not have any type of a number. Our 400 dollar water heater turned into an almost 700 dollar water heater. We had also purchased a refrigerator from Lowes that was the Whirlpool brand that quit working after about four months and we had to pay to have it fixed. Needless to say, we will never again purchase any Whirlpool products or recommend them to anyone. The service was very very poor and we are not happy with Whirlpool.

I just bought a house that has one of these ranges, and it was getting the F2 message. I found the problem. There is NO ventilation behind the electronic control so when the oven heats up, the control board gets too hot and throws the F2 code. That would indicate a bad temp sensor or bad board, but really its the heat shield on the back. Ive removed the metal plate from behind the control panel and it works fine now. Im considering drilling some vent holes and adding some insulation behind the control.

I bought a Whirlpool refrigerator, model # wrt779reyb00 with serial # vs13537798. The icemaker quit working and then water started leaking out from the door. A&E serviceman came out to repair and said we needed a new door. It had been over 11 weeks and the door still has not arrived and we have been told it could be as late as November. When I purchased an item, I expect it to work and if not, to be repaired within a reasonable time or be replaced. I have called and been told that replacement is not an option and that I will just have to wait. This is unacceptable. I purchased this refrigerator with water in the door and an icemaker and I expect it to work.

A few weeks after we bought it, the washer was already having issues spinning out, and the clothes would have to go through another rinse and spin cycle. A bout a year and a half in and I had to replace the pump because it stopped draining. Even carefully loading the machine, and at least two or three times a week it would not spin out. Two weeks ago it stopped agitating actually performing washing action and spinning out all together. Last night I replaced the actuator which controls the speed or lack thereof in the spin. Still nothing. Ive reset it multiple times, still nothing. At least the clothes are getting wet. At tax return time I am replacing this piece if garbage and I will never get another whirlpool, or Maytag washer again because from what I have been told by dealers and repair men; they are all garbage.

I have a Whirlpool cabrio washer (Model: wtw6300 Serial Number: CT3573525) and I am very disappointed with it. The spin cycle is the worst--sounds like a jet engine and gives me the UL error message of unbalance load. The machine was purchased in 2007 but was kept indoors. At the beginning, I didnt care because I had warranty with BrandsMart. I had to call at least four times. But now, I bought the automatic control and it didnt work. For two days, I was trying to balance this machine but it is impossible since the beginning.I contacted customer service and they advised me to contact the repair service in my area to get a diagnostic analysis of the issue. Hello! I already know what the problem is after reading all these reviews! I cannot tell you how pissed off I am. I will never purchase anything Whirlpool. Two of the gas burners of my Whirlpool kitchen, after two years of use, are no longer working. I will definitely contact BBB as soon as possible. Come on, fellow complainants, let us continue to fight to get a possible recall soon! We all have the same problem because this is a manufacturing defect!

In April of 2016 I purchased an aqua clean self cleaning oven from Colders Furniture in West Allis Wisconsin. We were told by the sales associate that the oven was top of the line. This was a complete and utter bold face lie. I cleaned the oven for the first time the day after Christmas after having prime rib. I followed the instructions to a T on how to clean the oven. I had to turn the oven on 6 times and scrubbed the oven until my fingers were bleeding, not to mention the enamel on the inside of the oven is completely bubbling. I called the customer care center on December 31, 2016 and the representative basically said I was an idiot and did not know how to cook. They made an appointment to send a technician out on 1-5-2017. Before hanging up the phone the technician informed me that if there was nothing wrong with it that I would have to pay for the call. At this time I became irate and refused telling them that I have not even had the stove for 8 months and that it was still covered under extended warranty. I will see what kind of smoke is blown up my rear end. The technician is sending a new sponge and scraping stick. How about someone to also clean this piece of garbage. My advice is to anyone is if anyone tells you to buy an Aquaclean self clean oven from Whirlpool run in the other direction and do not buy it. Thanks Whirlpool for the garbage and for sending me cleaning products that are not even worth a damn.

Within 5 years, this is my experience: A broken brand new Whirlpool fridge after 6 months of purchase; a broken oven that needed repair after 1 year, and today, the oven door just shattered in pieces after I heard a loud noise from the kitchen, almost injured the kids. And guess what, I just returned a new Tilt-Head Stand Mixer KitchenAid that wouldnt stay in place; the head keeps on tilting and would not stay locked. After being on hold on the phone for almost 3 weeks for a return, I found out it was a Whirlpool brand family. This is horrible, I would suggest to never buy the Whirlpool brand; their products are a real nightmare and their customer service is not reliable. If you do buy from them, expect unreliable products and very long long wait periods on the phone.

People should consider themselves lucky to get 2 yrs, 1yr, 6 mos out of these pieces of junk. Mine replaced an 8 year old Bradford White that was originally installed when the house was built. Funny thing, we had the exact same BW in our last house. Same problem after exactly 8 years - tank leaked. Anyway, this Whirlpool 40 gal gas was installed by a professional plumber ($200) and ran fine for 6 days before the pilot went out the 1st time. In the next 10 days it went out 9 more times until it wouldnt stay lit at all. I would light the pilot and it would be out in 5 min or less. I watched for the error code the last time - 2 flashes which indicated thermocouple low voltage. This is totally ridiculous. After research - which I should have done before I bought - it looks like a total bad design problem with associated customer service nightmares and much additional cost to the customer. AND EVERYONE WHO MAKES AND SELLS THESE THINGS KNOWS ABOUT IT. Attempting to fix this thing - even IF labor was included - looks like throwing good money after bad. When are these companies going to be held accountable for producing cheap poorly designed products and then let the consumer foot the cost of labor and/or replacement. You can say all you want about less government but this is just a small example of what you get when you have less government. Doing further research, it looks like NO manufacturer of gas water heaters can produce a reliable product now. So now, Im installing a Bradford White ELECTRIC water heater. Thats and extra $250 for the electrical service that needs to go in. AND additional for the actual install by a plumber. At least Lowes is not giving me a hard time about getting all my money back for the Whirlpool since its less than 30 days since the purchase. I guess I should consider myself lucky it malfunctioned almost immediately. Total out of pocket on the initial Whirlpool install: $560. Total out of pocket with reinstall of BW Electric: $1000. My time spent on this mess: priceless. At least we will have hot water, even though it will cost more per month in electricity to do it. Thanks Whirlpool - stay classy.

Good News!! Finally a permanent fix & possible recall. My Whirlpool Gold bottom freezer was 18 months old and Out of Warranty. It leaked water on my floor like all the rest. I called and was told I had to pay the service charge. Speak with a SUPERVISOR!!! They sent a repairman who said a Kit had just come out to fix this. I had to defrost the unit for a day and he returned with the kit. Part number is W10309238. The repairman believes they will be doing a recall and fix these drains. Insist on speaking with a Supervisor!!! Get results, they will do it as it is a design flaw. The repair took about twenty minutes. Here in Ottawa, Ontario call Youngs Appliance for more info.

LEDs on control panel started going out in four months. It’s a 400$ part. Under warranty but what’s going to happen in another four months? The range I had from the eighties was still working. You don’t get what you pay for anymore. Just excuses.

I purchased my Whirlpool gas range about 5 yrs ago as brand new. Two and a half years after purchase, I started getting the F2 error and always had to pull the breaker to stop the oven. Whirlpool would not do a thing, they wouldnt even listen to me. So I bought a new control panel. Now once again here it is the holidays and Ive started getting the F2 error when I try to use the oven. So needless to say this is my last Whirlpool appliance. And the Service Officer wont even listen to me when I say I have to buy a new oven.

My Whirlpool Gold, French door refrigerator is 3 years old and just died. The most frustrating part was trying first to go through Whirlpool.com to have them schedule a repair service call. It seems that when I added my zip code and address, their program automatically changed the zip code. So an appointment was scheduled for a repair company that is 4 hours away from me. In calling Whirlpool back (another 30 minutes on hold), they again attempted to insert my address and zip code only to find the program changed it again. I got NO assistance. I finally did find someone (through Thumbtack.com) who found that one of the 3 circuit boards that tell the compressor to cool, was bad. Its going to be 10 days before I will have a refrigerator again and after spending 2K on it, makes me angry. I will never buy Whirlpool again.

After reading all of these reviews, Im not surprised at the negative comments. My husband and I owned a Whirlpool washer and dryer for 25 years prior to them both dying the same summer four years ago. I absolutely would not purchase anything but another set of Whirlpool washer and dryer because of the longevity of our previous set.We bought the Cabrio set 4 years ago this summer. After two years, we discovered it had a slow leak at the back hot water valve and underneath it somewhere when it spun and it had slowly leaked under the wall into our living room which eventually caused our hardwood floors to buckle. We had to replace the flooring in that section at a cost I will not even say and had a repairman come out and fix the lid lock, leak where for some reason there wasnt a washer in the valve area, underneath and the problem with the spin cycle. This was at a cost of around $200.00. Of course our one year warranty had run out. The next year it did the SAME THING AGAIN!!! Although we caught it quicker, we STILL had to replace a small section of hardwood flooring and have the machine repaired yet again at the tune of approximately $200.00. Now, as I type, our machine has yet again flooded our laundry room one year later and I will have to call a repairman in the morning yet again! Its becoming an annual and costly thing!!!I came across this site while looking to see if by chance this machine had been recalled and we would be able to get another one at no cost since we have already paid a fortune for the errors it has caused. I will be reporting to the Better Business Bureau and writing YET ANOTHER letter to the Whirlpool company with the hopes that they will recall this machine!! If enough people protest and report this shoddy workmanship, maybe they will!!!

I called the dealers repair department, which said they had not seen this before and it looks defective. I have used the oven less than a dozen times. It is virtually new. They submitted pictures to Whirlpool. The oven surround is not replaceable, so the request is to get a new oven. Whirlpool responded with, This is normal... when the cracks break through, then there is a problem. What?! I have been cooking for over 50 years and have never had this experience before. This product is under warranty. By the time it cracks through, it will be too late to do anything about it. Since when is crazing on the oven bottom natural, especially after only a very few times used? This is defective and Whirlpool is shirking their warranty. I am very dissatisfied.

We purchased this microwave from Lowes. It already had a cracked handle but I wanted to change my appliances to Stainless and it was very cheap. I could just order a new handle and we would still be saving money. I received the new handle and it was very difficult to install, but I did it. Not even 2 months later, the same thing happened to this handle. We thought Lowes had somehow broken the original handle, but after reading all the other complaints, I realized that its a manufacturer problem. Last night, I was cooking on the stove and the plastic from the handle fell into the pot. I had to throw the whole pot of very expensive, and time consuming meal away for fear of eating the plastic.

Heats up fast. Easy to operate, Love how everything cooks evenly. Its about the best oven and range Ive ever had. If you are looking for a range and oven that is one of the best. If not the best try it. You wont regret it.

We replaced our 20+ year old washer and dryer with a Cabrio set. I read the instruction booklet twice to make certain I did everything correctly. Ive washed two loads. Both times, the clothes were in a ball at the bottom of the washer. Everything was horribly wrinkled. DO NOT BUY this WASHING MACHINE UNLESS YOU want your CLOTHES to COME OUT in a WRINKLED BALL.

Its a front loader and has lots of cycles and temperature to choose from. Its setting on a pedestal so its not too low. I dont like the way the soap is dispensed.. If you still have the door open when you pour it in the dispenser it almost comes out on you. It also knots your clothes up and makes them hard to get out. The rest is good.

Bought this washer NEW 4 yrs ago. Now sounds like a freight train in the house when in use. Whirlpool customer service is absolutely USELESS!!! They do not stand behind their product and refuse to acknowledge what is a common issue. PISS POOR and will NOT give me a number to a higher up. Absolute disgrace!!!UPDATED ON 10/28/2015: This is an update to my previous review. 1st, I contacted Whirlpool who was absolutely NO help whatsoever and the person I spoke to refused to put me through to higher ups on the food chain. I was wrong in my previous review when I stated that we purchased the washer & dryer 4 yrs ago. It was purchased in January 2012. Started making noise in 2014 and has progressively turned into the sound of a freight train. I also failed to mention the stench that comes from this machine. It has also got to the point where it quits with 10 minutes to go in every wash. Whirlpool did send out a Whirlpool certified technician, which they paid for, who stated this has been a common issue with these and other models of Whirlpool Cabrio wash machines. Says in his 3 yrs with the company he has seen and diagnosed over 30 machines with basically the same issues (bearings are SHOT) and Whirlpool refuses to accept any responsibility for the defective design and that, in his opinion, they shouldve never been released. He gave me an estimate of $257.13 to repair. We decided to go ahead with the repair and technician came out only to tell me that there has been a re-work in the design of the replacement parts as Whirlpool realized they were faulty. So I now have to wait for the NEW designed replacement parts to come in as they are back ordered. WTF does that mean??? Shouldnt there be a RE-CALL and shouldnt they accept responsibility for this??? This has been, without a doubt, the most disappointment weve had with any purchase of a NEW appliance or, anything else for that matter, in our lives. After reading through some of these same complaints Im wondering if this machine is nothing, but a money pit and whats going to go wrong next. We also purchased the Cabrio dryer at the same time and have had no issues with it as of this time, but I assure you, I wait with baited breath. Their customer service department is piss poor AT BEST!! Please, stay away from ALL Whirlpool appliances in the future.

Warranty services are trouble. For one (1) simple washer part its taking over 2 months. They state its on back order...while my food is wasting away. Whirlpool didnt even know what he was doing, and to the top it off, forgot to put back the part he took off!

Had the fridge 5 1/2 years. Freezer quit working was told by 2 different repairmen it would cost $800 to repair. Called Whirlpool, was on hold 45 minutes, literally, both times I called. They could not help me. Called the corporate complaint line. The man I talked to was such a smart **! I finally said I cannot believe you are talking to me like this, I have bought Whirlpool for 35 years. He backed off slightly. Still couldnt help me. BTW, I LOVE my new Samsung refrigerator! Will NEVER buy Whirlpool again.

Whirlpool Duet Washing Machine model WFW9150WW02 - This machine was purchased new in Sept. 2011 along with a brand new dryer. We started noticing a rumbling sound within the first year, but both machines did a fantastic job on the laundry. Then last week, the washing machine didnt spin out a load of laundry. We called the company and they scheduled a service visit through A&E Factory Service. The technician immediately diagnosed the problem as a bad bearing and said that he had seen the problem frequently with this model and put it down to a design defect. The bearing is housed in a stainless sheath protected by a rubber seal, but the seal lets water in, which rusts the bearing. The cost to repair it was over $700. He suggested I call WP and ask for a concession, whereby the company would at least pick up all or part of the cost of parts. The service representative summarily dismissed the request, saying the company had no obligation to stand behind the product as the machine was out of warranty. I said that this was unacceptable. She was pleasant, but kept asking questions and putting me on hold. Ultimately, she said the same thing. Whirlpool was once a dependable name, no more.

Bought side by side in 2010 and after the first 3 mth the ice maker jammed up. Found out the dispenser door was not working right so it was change. But lo and behold the dame thing jammed up again within 3 weeks and the door is working. I will never buy WHIRLPOOL AGAIN. I hope they go out of Business. They are selling junk and they do not care. Made in American. Pack your bags Whirlpool. You are no longer needed.

I like the double bottom french drawers but I don’t like that the top door hinge covers are plastic. Also I wish there was more height inside the refrigerator for tall bottles and pots. The wheels are great for moving.

Ice maker stopped making ice. This side by side Whirlpool refrigerator was purchased 4 years ago. We called Whirlpool. An authorized repair man identified the problem. At the bottom hinge of the freezer door two of the wires have been broken. A defective design, but no recall from Whirlpool. The solution is to replace the entire freezer door for a cost of $1200. Ridiculous that a replacement door cost more than the purchase price from Lowes. It would appear that these 2 wires could be reconnected, but Whirlpools only solution is an entire new door. Automakers stand behind their products with recalls, but its not the same with Whirlpool. Love my Whirlpool range, washer and dryer, but this counter depth side by side is a real loser.

Whirlpool 29 cu ft French Door Refrigerator WRF989SDAM - We purchased this refrigerator September 2013 for our new home. We moved in November 18, 2013. The refrigerator made a very loud buzzing/humming noise from the beginning and did not make enough ice. The shop we bought it from came on 2 occasions to work on the ice maker and finally totally replaced it. Then the rack on the bottom of the left door fell out and contained glass jars of pickled vegetables. They broke and made a big mess and etched our travertine tile floor. We called the shop and they sent their son out who put the rack in with duct tape which of course did not work so we took it out and put it in the cabinet. We had to pay to have the tile polished to remove the etching. On the weekend of November 15, 2014 the humming noise was so loud that we called the repair person again and they came out on November 17, 2014. At first they thought it was a fan motor but the freezer started making a loud noise and the owner came and said the compressor was going out. Our food was beginning to thaw and we asked if they could at least loan us a refrigerator to use. They brought us an old small fridge which was put in the garage. We took all our food out there. They came November 25 and picked up the fridge to be repaired. We had been told the warranty was out but after calling your company they were told Whirlpool would cover parts and labor. Today is Thanksgiving Day and we can not cook a big meal due to the small fridge and freezer and we are buying bags of ice every day. We have family visiting and must go out for dinner. We have no idea of when our refrigerator will be returned to us. This has been an expensive and disappointing experience. I would never recommend your refrigerator to anyone due to this experience. I really feel we should have been offered a new refrigerator at a discount. We bought all our appliances from Dons Appliances in Okeechobee, FL 34974 and they are all Whirlpool. This refrigerator cost $2299 and our total order was $9,642.84. We would appreciate a response from your company.

Well, I read most of the complaints with the failures in the machine. I guess most of them didnt last long enough to rate their performance so here we go. I bought a Cabrio top loader, high-E washer a couple of years ago. This one had a different kind of agitator - it was just a couple of inches or so off the bottom. I specifically bought this to wash comforters and it seemed like it was good for that (rousing agreement from the salesperson). So after a couple of years of working with it, here are my observations:Pros: There are absolutely none!Cons: Okay, other than not having control over the settings (cannot override any of the preprogrammed wash settings), it simply doesnt get loads clean (yes, I use expensive HE detergent). Except for the bulky setting, there is never enough water to wash and rinse the loads properly. Next, it makes a mess of the clothes. At the end of the cycle, and this is true no matter what I wash or how large or small the load is or which cycle I pick - even light and slow spin, it just makes a tangled mess of the load. Stuff gets stuck inside of other stuff, wrapped around other stuff or are balled up. Never have I seen this type of issue. I constantly get the unbalanced load notice and have to manually redistribute the clothes most of the time.To address the too little water level, there are two options. I have discovered that the bulky setting has the highest water level, so I use that most of the time. From time to time (when I need different water temps or just want more water), I have developed a work-around by putting a Y adapter on the hot water inlet and a short hose. Once the washer starts the wash cycle, I stop it and add a bit of hot water to bring the level up enough to do a decent wash job - same for the rinse cycle. So much for Whirlpools water efficiency.Next, the hot isnt hot. Its barely lukewarm. So I turn the cold down to a trickle and I get a bit hotter water. It takes forever to rinse though. Its a good thing Im semi-retired. Next is the inflexible cycle/water selector. I have never had a washer I couldnt override to tell it what to do in unusual circumstances. Boy, what rocket scientist at Whirlpool dreamed that up!But above all, this just doesnt get loads clean. I have experimented with all the variables, load size, cycle selection, detergents, etc. Most of the time, I have to do two cycles with my loads and these are not unusual or extremely dirty loads. They are just normal, everyday laundry for an adult couple. Really, Whirlpool! Who was the conceptual designer on this? Thank goodness they werent working on the space shuttle or some disease research.Bottom line, I am so soured on the design and performance of this product that I will never buy another Whirlpool product, either brand name or generic (Sears). I just cant understand how a company would let something like this out the door.

It shows handprints, smudges, the door swings open and slams into stove. I did purchase extended warranty which I intend to pursue, not enough space, door issue, junk. Dissatisfied, dislike, low quality - that should say enough.

I love my Whirlpool. Were a family of 3 with a pet dog. Its handle one childs work uniforms and the others sports uniforms (yuck). And then theres my work/weekend clothes. Its very reliable and it gets the job done. We have no complaints.

Whirlpool Gold Refrigerator, #GI6FDRXXY07 ICE MAKER PROBLEM - Ever since we bought this ref in 2012, we have been facing problems one after the other. First the refrigerator was shutting off on itself thawing the food the ref & freezer. (When we were on vacation, in summer of 2012 , it was a disaster when we returned home.) This a continuous on going problem... not fixed. Second 2012 Spring the Icemaker shuts off spilling water at the dispenser, when called customer service they sent a technician who replaced the ice maker. But again the icemaker is spilling water or leaking now. Third 2013 Winter, the bottom freezer was leaking and ice buildup at bottom. We have been having problems ever since we got this. WHIRLPOOL YOU HAVE DISAPPOINTED US, its been an exasperating experience. Please Help, its not our fault for your poor design & faulty product.

I have a top-freezer model WRT5715MYW. This week will mark the 3rd time Ive had a service call to complain about food freezing in the refrigerator compartment. The last time the repairman told me I couldnt place food in the center of the refrigerator since that is where the cold air from the freezer compartment comes down into the refrigerator compartment. This time when I called to schedule the repair call, the woman at the appliance store where I purchased this told me she also has a Whirpool refrigerator and she cant place any food on the bottom shelf of the refrigerator due to freezing. So this 21 cu ft refrigerator has a lot less usable space than I was led to believe when I purchased it. I would not recommend this product due to this reason. Beware of that channel that comes down the center of the back of the refrigerator. It seems like a design flaw to me.

Our refrigerator had ice maker problems from the beginning. After 6-7 trips (with a warranty extension) they got it fixed. Then randomly the ice melted, made a puddle in fridge and on the floor, the freezer thawed. Then it would begin running after several days. Finally Whirlpool recommended we replace the computer brain for $1000 PLUS. The refrigerator is 4 years old. We are having a Bosch delivered today, even though the ice and freezer turned back on after being off for 3 days. Customer satisfaction stinks.

I agree with all the other reviews listed here! How in the world is a washer to get clothes clean when there is no agitation? Or enough water to even cover the clothes? This is a complete waste of time, one cycle can take an hour or more, because the extra rinse cycle is necessary. And it takes 20 minutes to just sense the load. What a crock. And yes my clothes smell also. Please any recourse besides buying a new washer? Does Whirlpool stand by the product?

I purchased a home in March of 2013. When I bought the home, I noticed it had a new Whirlpool 50-gallon gas 6th sense hot water heater model number ND50T122-403. It was newer and I thought it was a good selling point and would last many years. The original owner had purchased the heater in March of 2011. Three months after I moved in, the control valve went bad - 4 flash eco lockout. I called Whirlpool. They sent out the replacement part. I had to pay for shipping express delivery. Since then the control valve has gone out 2 more times, a total of 3 times in one year. On the third time, they gave me a return number for a replacement. I dont even want this heater for free. I am still required to pay for installation and additional installation parts. This product is terrible. Save yourself a headache. Do not buy this product!

I wish I had gone on this website and read the reviews before I bought my washer about two years ago. I thought the Whirlpool Cabrio was going to be a good machine because of the brand name and because it is one of the more expensive washers. Like many others have said, I am disappointed with this washer. I bought it because it has a large capacity, but mostly because it has a hand wash cycle and a deep water soak. I have found that the only cycle that actually may get clothes clean is the Bulky Items cycle, because it actually covers the clothes in water. Some of the other cycles dont even get the clothes entirely wet. And the deep water soak doesnt wash the clothes, rinse them, or spin them dry. I might as well pre-soak clothing in my laundry tub, and then put them in the machine to wash them. Prior to this machine, I had a Maytag Neptune front loader, which did alright, but it had a few problems. I am ready to go back to the inexpensive agitator machine my mother used to have, if anyone still makes them. They at least got the clothes clean, and you could soak clothing if you wanted to. Im sorry that I bought this expensive washer. I wish I had bought a relatively inexpensive, simple machine. One good thing about this machine though is that I was able to wash a sleeping bag on the Bulky Items cycle. So, I didnt have to take the sleeping bag to the laundromat. Whirlpool needs to improve this machine or go back to the drawing board and create a new one.

I feel that at the end of the day I do owe Whirlpool a good feedback. Our top load washer stopped rinsing so I checked the clutch, agitator dogs and coupler which all looked brand new. So I thought Id take the trans apart and after pulling the plastic agitator out I noticed the tub had completely rusted in half! The tub dropped down about an inch. The agitator would spin but the tub just sat there. Now came the difficult part. I told them I was quite sure about my diagnostic that it needed a new tub and told them I could send them a video (I even posted a video on Facebook and Twitter). But they said they would have to send a man out at $180 to make sure! After several days of back and forth conversations, someone at Whirlpool finally saw the video and agreed to send us a new tub. I havent gotten it yet but have heard through the grapevine that these tubs were supposed to be replaced if rusted because of the quality of metal used? So other than pulling a few teeth and needing to replace the tub, our washer has been a pretty good machine.

Bought brand new, Whirlpool front load washer and dryer, from Corbeil. Got both items home and connected and levelled (yes I took out the shipping bolts). Did my first washing and watched my new washer dance across the floor. Called Corbeil and they told me no refunds. Best they could do was to send out a Tech to check it. Tech came, changed the shock absorbers, a token act because the machine danced as much as it did before. Please for your own well being DO NOT buy this product and DO NOT buy from Corbeil. There are other products on the market that advertise items that dont shake.

We purchased a Whirlpool dryer almost three yeas ago. Its a front load, steam dryer--or WAS should I say. Almost a year ago, I was unable to calibrate the control panel (in other words, to change the cycle). Ive been advised by the tech that I need a new control panel $200. Really Whirlpool??? A $500 dryer that lasts two years?

whirlpool Cabrio Washer - I replaced my front loading Duet with this, thinking I was done with front loader. Designs are set to fail, liked the idea of no agitator, thinking can clean a lot clothes at once, boy was I wrong, heavy loads wont spin dry, forget sheets or blankets. The machine just stops, leaving everything soaked and you basically screwed, you can invoke a spin cycle but to help make rinse and spin out, sooo disappointed. Whats wrong with the designers of this product? They didnt try sheets to see if it would even work. I am far from over loading this too. Dont buy this.

I have had a terrible experience with fridge Whirlpool. Two fridges have been delivered to me in bad condition. The first one was aesthetically awful (looked old and used) and the freezer didnt work so it was exchanged. The second one works and it looks ok but it makes very loud noises all day every day. I live in an open concept condo and this fridge sounds like a train for more than an hour more than 5 times a day, it is terrible. I have been calling customer support for a solution and first of all, there are no technicians in my area, and since the fridge works as designed there is nothing to fix so Im stuck with a terrible noisy fridge that I hate and destroys my day which I paid a lot of money for thinking that the brand meant quality but it doesnt. Customer support doesnt respect the customer and their answer that the first works as designed makes me understand that Whirpool designs bad quality fridges. I have never heard a fridge making these noises, not even brands that are less named than Whirlpool. For your inner peace, I recommend you to stay away from Whirlpool-Maytag fridges... If the fridge is in bad condition (but working) youre going to be stuck with it. The brand doesnt really mean quality and support... it just means more expensive.

Purchased this machine in Jan 2012. From the start, dark clothes came out with white streaks on them. Thought I was doing something wrong - kept using machine. Then started noticing my whites coming out looking very dingy, light tan stains on them. Called Whirlpool and was told to use Affresh tablets to CLEAN my washer - why should you have to clean a washing machine?Several weeks ago noticed machine getting very loud during spin cycles - and I mean loud! Sounds like a jet engine taking off in my basement. Called repairman - he listened to my machine and said noise is the bearings, seal not fitting properly around bearings and the grease for bearings is slowly leaking out into my wash cycles. Explains the dingy whites and spots on darks. Said he just worked on a Cabrio with same issue - had to rebuild seal and bearings - about a $450 job. After reading all these reviews, decided not to attempt to fix this machine. Going to scrap it and start over. $900 for 3 yrs of an inadequate washing machine!! Whirlpool should be made accountable for this inadequate product to all of us consumers who threw away hard-earned money. Reading up on the Speed Queen agitator model. Lots of good reviews. Think I will go back to the old tried and true way of washing clothes.

I bought a Whirlpool refrigerator because it was the lowest priced model that offered a bottom freezer compartment and fit into our available space in the kitchen. We also want a white coloured appliance. One thing we never noticed until set up at home was that there were no ice making trays nor an ice bin. We have had the fridge for five years with no problems. It is quite noisy when running.

I have a combo Microwave oven/oven GMC275PDS07. When the microwave is finished with the requested program, the end of program chime lets you know its done. Then, if the door is not opened for at least 3 seconds, the chime will ring again every minute thereafter ad nauseum. This will go on for hours without end. I know because I tried it. I reached out to Whirlpool via a web chat and my question was not even addressed. I was ignored. From reading other submissions, I assume this is de rigueur for Whirlpool. I then called Whirlpool and spoke to Katie in Tennessee. She was not able to bring up any make or model when I provided her the numbers exactly as listed on the inside of the door. She was not able to provide any respite from this annoying feature.This a Whirlpool Gold model, presumably the top of the line, in my book I will never purchase any Whirlpool product of any type and I will make it a point to let anyone who will listen that Whirlpool is not a manufacturer that takes its customers concerns seriously. Katie then advised that she looked up this feature and told me there is no way to turn the beeping off. I find this amusing since she could not find the model or serial number when I gave it to her.

Just purchased Whirlpool top load large capacity washing machine with no agitator at Lowe’s three months ago. I sit at the kitchen table in my freshly washed exercise clothes and smell body odor. There were six exercise items in the load and supposedly enough soap. The load washed for 45 minutes last evening. Yard work clothes washed yesterday are not clean. I had to remove grass from the bottom of the tub. When I iron my smocks for work, since I work with animals, I pick pet hair off of them as I iron. Judging from other reviews, this torture won’t last long, before I need to replace this piece of junk. My last washer lasted 20 years. If it didnt leak water, it would still be running. Thanks Whirlpool, I guess the joke is on me!

We purchased our new home in February of 2012 and found a good deal on a 6 appliance package from a local dealer (not box store). In these four years, had to replace igniter in gas range oven. Weve had 3 repair visits for the fridge, dead ice-maker, temperature imbalance freezing vegetables, meat drawer constantly falling off tracks, door shelf rails fall off and all shelf contents fall to floor. Dishwasher rinse dispenser has never functioned, never empties. Technician claims it is working as designed. Washing machine - 3 separate service calls. We finally decided to buy a different brand last year. Only the dryer and microwave have have performed as expected with no service calls. The package deal saved us about $500 but in just 4 years we have spent over $1000 (including $400 to buy a new washing machine). VERY disappointed in this brand.

GW399LXUS range is Dangerous. Sheet metal cuts your fingers. In over 6 months, Whirlpool has failed miserably in fixing the problem. Bad replacement parts. Incomplete parts shipments. A dozen service calls. The local independent service companies are the only ones who have acted professionally. Other than the poor people who answer the complaint lines, nobody at Whirlpool seems to care. The product is poorly made and the product support is not competent. The range may have the features that we wanted, but who needs all this headache?

Our Whirlpool refrigerator, model MODGI5FSAXVYO, began leaking water from the freezer onto the floor about 3 months ago. We purchased the unit in January 2011. We had to keep a towel on the floor to absorb the moisture. Our troubles began after the freezer door was left ajar and the interior became quite frosty. We had turned off the freezer several times to defrost but nothing helped until this morning when I read the comments of Marea of McClellanville, SC and Ruth of Vavenby, BC.I then decided to begin exploring taking apart everything until I reached the freezer unit in the back of the freezer. I discovered a lot of ice with the ice blocking the drain hole which is supposed to drain condensation from the freezer fins to a drain pan in back of the freezer. Apparently, leaving the freezer door ajar caused the drain hole and surrounding area to ice up. Condensation from the fins would keep dripping until it overflowed onto the bottom of the freezer until it filled up with ice. The water then had nowhere to go but out of the freezer onto the floor. The simple solution to this problem is to turn off the fridge, empty out the freezer and allow the frozen drain hole to thaw out. You can easily remove the back panel of the refrigerator to see if water is then draining into the drain pain. Good Luck! Ed

DO NOT BUY ANY WHIRLPOOL PRODUCTS! After purchasing a dishwasher in April 2017, it died after a year. The subsequent years have been filled with waiting all day for service repairs 6 times and living without a dishwasher for up to a week at a time. After 6 services the product continues to malfunction. They are refusing to replace the item and now inform us that we must pay to have it serviced. I cannot stress enough that no one should purchase any products from Whirlpool as they are sub-par products and they do not stand behind their products.

I purchased a Whirlpool Cabrio Washer in May of 2009. I do laundry for only 3 adults, so I never run more than 3-4 loads a week. It constantly is off-balance when spinning and requires positioning the load again several times before it will continue its cycle. Now 5 to 8 minutes into it filling with water, it stops filling and beeps, and code F shows up on the screen. Also, during the spin cycles, it is very loud and fast. It sounds like it is about to take off anytime. I called customer service to no avail. They just wanted me to schedule a repairman to come out and fix it at my expense. Now, I know why they only give a one-year warranty - they know it will last one year but not much longer. Im from a generation of people that is used to appliances lasting 10 - 14 years and the company stood behind their products and didnt ask you to buy an expensive extended warranty for the 2nd year and so on. If inferior products were not manufactured, there would be no need for an extended warranty. Anyway, Im not going to put any money (I was quoted a $129 charge by Whirlpools service department just for the diagnosis of the problem which didnt include the labor or parts costs.) into a washer that will probably continue to have problems and become a money pit. Consequently, I will never buy nor recommend anyone buy Whirlpool appliances. It would get quite expensive buying a new washer every 3 years or buying the extended warranty plan. The matching dryer had no major problems, but a couple of years ago, I had to have the door changed from opening from right to left to opening from left to right because the door catch broke on the right side. Hopefully, nothing else will go wrong with it in the near future.

In 1994 we built a new home and we used only Whirlpool Appliances. In July 2006 we replaced all the appliances with another Whirlpool products, although they were still working including the microwave. After two years the microwave stop working, replaced it with another Whirlpool microwave and the second one stop working last night (July 2014). I noticed the quality of all their products went down including, Dishwasher, Washing Machine, Refrigerator, etc. The dishwasher heating element start to decompose and I replaced it. The washing machine get stuck and the water never stop creating a major flood in the house. The refrigerator door seal torn apart. I decided not to buy any more Whirlpool products.

I bought my Whirlpool Cabrio Top Loading HE washing machine and dryer duo in February 2009. I carried an additional extra extended warranty for an extra 3 years. Now, at the dispenser where you add the bleach, it has rusted. The rust has gotten so bad the lid has detached from the body of the machine. I cant understand how a machine less than 4 years old could rust so badly. I called Whirlpool to complain and they suggested I get it repaired and my cost. A car that sits outside in rain, sun, snow and hail does not rust in 3 years. I bought the machines from Home Depot. The way Whirlpool has handled this, I will never buy another Whirlpool.

Smelled strange odor in laundry room area.. Noticed plastic panel to Whirlpool electric water heater controls was melting and immediately closed breaker to the heater.. After inspection of heater control panel, noticed all wiring damaged and burnt causing burning smell.

Whirlpool Duet Steam Washing Machine WFW9500TW had F35/Suds code 14 months after we purchased the washer. Hose / air trap is clear and the hose from the analog pressure switch is connected properly. The appliance tech we had come out to look at the washer determined that the analog pressure switch was defective. He told us that this is a common problem with this washing machine. Whirlpool supervisor, Michael (female), stated that they could send a tech out - and charge us for the call - to diagnose the problem. She refused to transfer me to someone who could help and couldnt comprehend that the its out of warranty excuse isnt a proper defense for a product defect. There are many posts about Analog Pressure Switch problems with this washing machine.The posts about Whirlpools poor customer service are absolutely accurate. They are horrible - good luck in getting them to work with you. We read the reviews for the Whirlpool Duet Steam washing machine before purchasing one and we disregarded the bad ones as disgruntled customers. Please do not make the same mistake we made. After my conversation with their customer service dept today, I will never buy another Whirlpool product again. Defective parts happen. Refusing to fix a known problem is unacceptable.

I purchased a Whirlpool Duet front-loading washing machine on September 27, 2010. By October of 2011, it was making a loud grinding noise during any spin cycle. I called for service and was told I needed new bearings which entailed rebuilding the machine. I had purchased a 5-year extended warranty. I was originally told by the warranty company they would replace the machine.After waiting two months, and after several contacts made by me to the retailers customer service, I was told the machine would not be replaced, but repaired. After the repair, on January 6, 2012, the machine now rattles and shakes so much during the final spin cycles. It is literally impossible to have a conversation with someone standing next to you in the same vicinity as the washer, it is that loud. I am sorely disappointed with the Whirlpool line of products and with the retailer who has been dragging their feet on customer satisfaction.

On Saturday afternoon, March 31 at 4:30 PM Eastern Time, my roper washer that was purchased on April 17, 2011 overflowed from the top. Water went into the air ducts and completely fried my security system. My husband was out of town at this time on business. The water went into the terrace level of my house and ruined the carpet, walls and ceiling. The restoration and insurance companies came immediately and were a tremendous help. I felt very safe with them even though they were in my house until 1:00 AM Sunday morning. My husband and I visited our Lowe’s store where we had purchased the washer. They told us to contact Whirlpool which we did on Monday, April 2. We were assured by Whirlpool that we would have a Whirlpool employee in our home to fix the washer. We were also told that we could not move the washer. After speaking with a Whirlpool representative, we received an email confirming the repair person would be in our home on Wednesday to repair the washer. During this time, I had to go to the laundry to wash clothes. This cost me $26.00. On Wednesday afternoon when no one had shown up to repair the washer, my husband had to call Whirlpool only to be told that the repairman would not be coming but he would be there on Thursday between 10:00 and 1:00. He arrived at 12:45 and the nightmare began. He had an “I dont care” attitude and if my husband had not been at home, I would have been very uncomfortable. After looking at the washer, he said a part would have to be ordered and it would be the next week before he could fix it. I asked him what I was to do about clothes to be washed. He replied go to the laundry, he was just the repairman. He also said I could use the washer but not to put a full load. On Tuesday night, April 8th, I was washing and I had the washer on medium load and the washer started leaking from the bottom. We still have not heard from the repairman, today is Thursday. Also, my husband and I work outside the home. It would have been so much easier to have the washer replaced but instead we have to wait. We had a washer to be delivered on Tuesday, April 2nd, but we are still waiting on them. Most of the restoration work other than the washer has been completed. Thank you.

I purchased it new in July 2008 for $550, a single homeowner average 4-5 loads a week. First time it broke down, it was just inside the one-year limited warranty. It broke down again Sept. 2011, the basket separated from spinning mechanism. I learned that after $75+ missing day of work, repair tech quoted cost of repair $885 and a minimum of 10 days waiting for part to arrive.I called Whirlpool, the guy on the phone was nice but told me I was out of luck. Even if I had purchased the 3-year warranty, I would still be out of luck. The washer was manufactured in April 2008. What a piece of junk. Save your money and skip it. I wish I had. Aside: Whirlpool, whatever happened to standing behind your products? I used to think you were a quality brand. Im extremely disappointed and wont be purchasing any of your products in the future.

After having an expensive front loader (ugh) we purchased the Whirlpool Cabrio top loader (wow)! Best washer ever owned, wouldn’t trade it for any on the market! It has been as great and problem free as the front loader was terrible with cleaning and smell.

After 2 months of owning this fridge (Whirlpool Model WRF993FIFM) it started making a horrible buzzing noise that you could hear all around the house, both ice makers stopped working, and it wasnt cooling properly. After three technician visits, and of course having to miss work to have the technicians come to my house, my fridge still doesnt work. The most recent visit today was from 2pm until almost 8pm, yes seriously 6 hours, and now the noise has gotten even louder and my ice makers still dont work. AND after the tech left, my carbon monoxide detectors were going off for almost an hour. We had to open all of our windows and sit outside to not DIE of carbon monoxide poisoning. So beyond livid with this situation. Its been a month since Ive had a properly working fridge. Whirlpool needs to do right and fix this situation. I will be calling tomorrow first thing.

Ran Aqualift self cleaning cycle 4 times at 40 minutes and only bottom was cleaned, sides are still spotted and the rear wall still shows a heavy spotting. My stove is less than a year old. My prior stove with self clean at a higher heat was great, when done only had to wipe out!

I bought the Whirlpool Refrigerator wrf989sdam00 in September 2013. Ive had nothing but problems with it breaking down within the first year. 5 days after the first year the 2nd cooling coil stopped working. After several attempts to get some help from the company I paid $500 for the second coil to be replaced. One year later that second coil has broken down once again, called Whirlpool and got nowhere. Ill have to pay another repair company to come in, AGAIN, to repair this piece of junk! Whirlpool does not, will not, has not, stood by their disastrous attempts to produce a refrigerator to keep your foods fresh. DO NOT BUY ANYTHING FROM WHIRLPOOL AS THEY DO NOT HONOR THEIR OWN PRODUCTS!!!

Cabrio Washer - Absolutely the worst thing I have ever bought... everyone told me to stay away from this brand. Bought in 2011... large tub... nothing but problems. My last washer was great... full tub with water, could soak or pre-wash. This one does nothing except create some kind of lint all over my clothes no matter what setting... I dont care about water usage (mine is free) but I do care it takes 50 mins to do a load where my other was exactly 20 mins (and it lasted me over 30 yrs!). This really sucks. I have seen other complaints but never a recall!!! NEVER EVER AGAIN!

When you purchase a Cabrio high efficiency washer dont expect clean clothes! But, you can expect holes, torn and, smelly clothes. It takes a ridiculous amount of time to wash. The machine I purchased has a glass top but its dark and you cant see into the machine so that was a waste of money! If you wash clothes in 1/4 depth of water, nothing gets clean. Who even designed this disaster? I had enough common sense to know it was going to be bad but the salesman at Lowes informed me that ALL washers were high-efficiency and getting a tub full of water days are over. I wish we wouldve just paid for repair and kept my old washer. I hate doing laundry with this machine! I use to be able to wash my blankets, pillows, curtains, throw rugs, even car mats with no problems. Not anymore! This machine couldnt handle it. You ought to see my sheets and shirts when theyre done. They come out twisted up so tight I have to untangle them before they go to dryer. What a horrible nightmare of a machine! If we were not out so much money Id send this machine to the junkyard and get a real washer with realistic amounts of water! How are you saving anything when clothes require 2 times to get somewhat clean??? If youre reading this and considering a high-efficiency washing machine, DONT DO IT!! You will regret it. Im counting the days when I can junk mine!

We bought a new oven/range in April 2019. December 7th 2019 it stopped working. No power at all. We contacted Whirlpool about our unit as it was still under the year warranty. They contacted their local repair company. 3 times they have said they were coming out to fix it and they had the part. Three times they have told us never mind. They didnt have the part and would have to come later. Most recent update, they wont get the part until the 20th and wont make it out until the 23rd. That is over 2 weeks after our unit broke and it is the holidays and we will have family visiting. We have tried to get answers about what is really going on and we keep being told they cant help us or give us any answers. So frustrated. You can bet I will never buy another Whirlpool appliance again!

I had one of the first Maytag Neptunes. Loved it to pieces but finally had a problem and my beloved repair guy said it was almost 20 years old so to give up and move on. Obviously, cant be without a washer for very long so grabbed this Whirlpool Cabrio Platinum Washer. One of the biggest disappointments ever! Clothes come out streaked and splotched, dont smell very fresh or clean even straight after having been washed, stains dont come out even with pre-treating, have to run everything on heavy duty, whites are getting grayer by the week, and all-around horrid performance.Im ready to give up my Starbucks, start packing my lunches for a couple months, skip whatever treats I have to in order to get back to a quality machine that can actually WASH CLOTHES. I wondered exactly what it was or wasnt doing so I stood over it for half an hour. Initially, it loads up about a gallon of water and then spits it out over the rotating drum of clothes. Then it stops and spins that water out. I suspect the design logic was that it would force that gallon of water thru the clothes taking some dirt out with it. It repeats that stupid process several times. Then it finally gets a few inches of water in the bottom and the vestigial agitator tries to move it around.I watched one hand towel lie on top like a dead weasel, never getting pulled down or pushed out or whatever it was supposed to do to get down among the other items and squish together. Life throws me everything from sick kids spewing body fluids to people coming home reeking of hydraulic and other industrial fluids. When I say clean I mean CLEAN. This piece of junk couldnt satisfactorily process half a dozen dust rags. Neptune, Im coming back with my hat in my hand and a whole new appreciation!

On 12/31/2009, I purchased a Whirlpool Cabrio, model# WTW6800WW1. I was excited as we have never spent that kind of money on a washer. We felt as though we had purchased a higher end washer and would have it for years to come. Wrong! About one year in to its use, I began to think it was getting louder during the spin cycles. I thought I was just being critical and it was just my sensitive ears. Now just past the two-year mark, I know it was not me. It’s the POS washer. It is so incredibly loud, not that you cannot be in the same room as it is during the washing time especially the spin cycle. In its defense, my clothes got cleaned.However, I know that the bearing is eventually going to give out and I will have a mandatory repair on my hands or have to pay someone to fix it. Either way, it’s a lot of time and a lot of money to fix a two-year old washer that should not need to be fixed. I attempted at getting Whirlpool to stand behind their product. No chance, no way. Good luck with that. Their washers last about 2-3 years. I will never purchase another Whirlpool product. This is a horrible product which is matched by their horrible customer service.

I had purchased fully automatic top loaded WHIRLPOOL WM 360 BW PRO-HS 9.5 on 08/05/2019. I had purchased the above machine after going through the various claims made on the website. However, I regret to say that since installation I find that the performance of the machine is not up to my satisfaction. Even after two visits by the engineer, the following issues remain:(i) The machine makes lot of noise in the initial stage.(ii) Though the timer shows a particular time during selection of a washing cycle, in reality the machine takes one and half times more than the timing shown. In case one selects warm / hot water, the actual time taken is twice that shown or more. I am sure in winters it will take more time in case warm / hot water is selected.(iii) The clothes get badly entangled during wash.In the past I had a LG front loading washing machine which never gave me any problem. I had gone for the best top loading model of Whirlpool hoping for better performance but it has only caused problems. Not worth the expenditure.

Broke within a year, company wouldnt back its product. Went out for another range, chose a different brand. Make sure you know the companys policy in case of breakdown. Sometimes, even though it might be an off brand, might turn out to be the option. Think outside your norm, listen to employee, other consumers. Just because its on sale doesnt mean it actually does its job.

The new? improved model with NO center agitator is the worst - clothes tangle badly and the load becomes very unbalanced, wobbly and noisy. How I got talked into this model by a Sears salespeople was a big mistake!!!

Since my review I have been corresponding with Whirlpool Customer Service (Chris). First he sent me an email and mailed a replacement board to have us (the homeowner) install. Because the cover was so melted, the replacement board would not fit down into it. I emailed pictures to Chris. Once he saw the pictures, he called me and arranged for the water heater to be replaced since it was still under warranty. He even extended the authorization code so we would have plenty of time to arrange for a plumber to do the work. We had to pay for the plumber, but Whirlpool arranged for us to have a new water heater. Now I can sleep at night without worrying that my house would burn down if the old water heater caught fire. Chris was GREAT to work with. I had a direct number to him and called any time I had a question. I was very impressed with Whirlpools Customer Service.

I bought a Whirlpool refrigerator (model number model ised5lvaxwq00) about 14 months ago. The icemaker would not work when delivered. I had it fixed. Several months later, it quit working. It cost $200.00 to have it repaired. The ice door stopped working. I called Alabama Power to repair the icemaker. He advised that it would cost around $300.00 to repair. We are on a fixed income and cannot afford to have it repaired. On investigation, I found hundreds of complaints about the same issue with the icemaker flap. I would appreciate you trying to eliminate this problem.

My Whirlpool range is a great buy and it cooks well. I have never had a brand new range that snaps, crackles, and pops. It was letting me know that it needed to be broken in and used for a while. I have had it for a few years now and it is just now getting broken in well. I do not even smell the brand new burn smell it use to give off anymore. Awesome!!

Oh my goodness, are these people right with the Whirlpool Ranges. I moved and put in the appliance # to get what I had from Whirlpool. What a piece of crap I got in a range and refrigerator. Never had appliances that looked so pathetic. You cant clean the outsides or the insides. Outsides nothing but streaks never look shiny, I really do doubt they are even close to Stainless steel. My old ones I might add were less than 5 years old when we sold our house and all you had to do was spray with Windex and shine shine shine. Try that on the new ones streak streak streak, and nothing ticks me off more than looking in a kitchen and looks like pigs are running all over your stuff. Then the range aqua lift self clean. You have gotta be kidding. No self clean about it. Scrub Scrub Scrub by hand. You mean who in the hell came up with this. Make something with fat and instant burned mess. Really oil and water or grease and water where I come from they never mixed, and all they do is get gummy. Now if you dont care how your oven or outsides look then I guess it doesnt matter BUT I DO, I am with the guy that said he just wants to throw it out. I would have been better off buying a clean your own. At least you could use oven cleaner. I dont know where these companies are coming from ripping people off this bad, now that I am older I am stuck with it and can hardly clean it to get down in there. You make supper and you have to spend 2 hours extra in the kitchen scrubbing the damn thing. Of course you give a company loyalty and get screwed this bad. All my self cleaning ovens I had when we sold houses the people thought you never cooked in them. This is not even a year and a half old and looks like it is 10 years old. Even scrubbing it is a joke. You cant get it all anyway. Im sure I will not live with this long. I use to love to cook even did it for a living and man using this thing I hate cooking more than ever.

Clothes dont always come out clean. If there is anything more than 2 sheets in the washer, it becomes unbalanced and then goes through a rinse until the water is up to the top! You have to watch any heavy load for this! Today there were 3 sheets in the washer and sure enough it kept rinsing until I physically reached in and rearranged the sheets. Then when it was done and I pulled the sheets out to put in the dryer, they were SOAKING wet! I hate this machine and will NEVER get an HE washer again.

I purchased a high-end Whirlpool dishwasher (WDT710PAYM) a few months ago thinking I was making a wise upgrade. Poor design and it wont dry dishes or properly wash utensils when theyre placed in the utensil rack on the door panel. The unit heavily condenses after using heat dry mode and large water droplets completely cover the top of the inside cabinet. Eventually, they all fall down into the dishes and you now have wet dishes again. The Whirlpool tech’s response was to scratch the cabinet plastic with a scratchy pad, smear rinse aid over the plastic cabinet and that should stop droplets from forming. Whirlpool’s customer service told me they shouldve never told me that and what I should do is be there during the drying cycle and open the cabinet door to let the steam out. This is completely ludicrous. Dont walk but run away from Whirlpool products.