Safety issue with Dishwasher Model MDB6949SDH. Fire hazard! Strong electrical burning smell when using powerblast function. Waiting for some Whirlpool action but does not look to be too soon. Chat noted a report to be filed with safety department and will hear from them. No hear so far. Pick up phone Whirlpool.

I paid about $400 for this dishwasher and the regular price was over $600. Got a good deal. It washed dishes wonderfully. All I had to do was scrape the chunks off. It cleaned the rest. BUT... at a certain point, it started NOT cleaning. It was only about 6-7 months old. It was to the point where everything just came out kind of slimy and food grit was re-deposited on the dishes. I cleaned both filters. I made sure there was enough Rinse-Aid all the time. I ran hot water in the sink before starting to make sure the temp was hot enough. My husband went online and someone had instructions about cleaning the water intake because it could sometimes have sediment buildup. Not a difficult process, but there was no gunk in the intake filter. When I listened to a load it seemed like it drained, (most start with that), paused, rinsed for a couple minutes, paused, drained, paused and refilled for the wash cycle. So the pump worked, the arms went round and sprayed. Nothing was in the way of the arms. After it started the wash cycle, it seemed to just stall. It would spray for about a minute and then stop. Im not sure it sprayed after that. The timer kept counting down. It said dishes were clean, but it was an absolute waste of time. I was ready to go buy a cheap dishwasher and throw this one in the dumpster. I think it is a 720 padm??Just after my husband checked the water intake filter, we started another cycle. When it was rinsing, he opened it up and everything seemed to be working ok. It drained, then filled and started the washing cycle and then stopped. He opened it back up and surprise, the water was full on the front level by the float (that turns the water filling off). But in the back of the dishwasher, there was only about an 8th of an inch of water. Online it said the water should fill to just about the top of the heating element. It WASNT. Problem? It wasnt LEVEL. The instructions when installing said it should be leveled. We did when installing it (when it worked great). But looking back, we put in a new hardwood floor about the time it stopped working ok and we didnt put 2 and 2 together. We did not re-level. When we pushed the dishwasher back into its built in cabinet, it must have gotten OUT of level.The rinse part worked I guess. Then it drained and re-filled. After re-leveling the dishwasher, we opened the door at that point. The water was a level depth front to back and side to side. My husband explained what he thought had been the problem to me. When the wash cycle starts it fills, the float shuts off the water at the appropriate level. THEN... the dishwasher starts to pump and fill the arms and the tube up the back that feeds the upper washing arm. So much water goes into the arms and up that tube, the dishwasher looked almost empty of water again. As the dishwasher was now level, it began adding water to compensate for the arm/tube filling. Before the float would shut off too soon because the front part of the tub was full but the back wasnt. Without enough water, the dishes were NEVER going to/COULDNT get clean.The re-leveling made sure that the float didnt turn off the water filling until there was much more water, the CORRECT amount. The next load cycled all the way through, spraying much more than Id heard before and the dishes were clean. P.S. I also got some dishwasher cleaner and used that on a couple empty cycles. I NOW LOVE this dishwasher again. FYI If my husband wasnt handy Id have junked this thing. We HAD leveled the dishwasher when we installed it. Just didnt realize it COULD get un-level just pulling it in and out of the cabinet to install new floors. Check out all the troubleshooting stuff in the manual. But if it doesnt help, put a level inside across the bottom rack, front to back and side to side and make sure the bubble is in the middle of the two lines.The previous dishwasher I had, just made like a fountain of water that went up the middle of the dishwasher into a sort of funnel filling the upper arm. THIS one has that tube up the back and it curls down under the filter and Im guessing it is more sensitive to being OFF LEVEL, because the tube doesnt go straight down, it curls and lays across the bottom of the tub. Without being level, there was never enough water to suck up that tube to start the the actual wash cycle and it just stalled there till the timer said clean at the end. IE: dishes never did wash. BUT IT DOES NOW! Woohooooo!

Clothes never feel clean, feel gritty and linty. See grit in dryer lint container all times after drying clothes. Always use extra rinse to no avail. Worst machine I have ever used in my 82 years. Now itching all over my body.

Purchased this oven in September 2012. Three months in, we tried to use the self-cleaning feature and blew a thermal link (guessing terminology). Tech came out and got the oven open and that was his determination. Also said he would replace both the front and the rear one because it was pretty common that if one was bad the other would probably follow. Said hed have it within a because he had to order it from the factory. I called a week later because no revisit had been scheduled and found out that the factory also did not have the part and was sending me a new unit. Whirlpool was supposed to call and tell me that and did not. It would be another week. Then a few more days for them to come out and replace it and pick up the original unit.Now I have brand new unit again so we tried the self-cleaner. Same issue. To make a long story short I called again this morning and scheduled yet another service call because the oven is inoperable again after running the self-cleaner. This is the 4th time with the replacement oven. They have replaced the thermal units several times and have replaced the fan.Fortunately, when I complained vehemently about the original unit, Whirlpool gave me a one year extended warranty on the replacement so I am still under warranty, which, if youre dumb enough to buy a Whirlpool after reading this, I would advise paying for. If you already have one and are having similar issues, call Whirlpool and insist they give you one for free because they sell junk.This time I told the nice customer service lady that, since the holidays are over and I can get by without the oven, I am going to run the self-clean right after the tech leaves. When it blows and gets repaired again I am going to repeat the process until they refund my money or send me something that works. Whirlpool apparently doesnt care because in their agreement with their service companies they only have to pay for the first visit. After that they just supply parts. I will keep doing this until I run out of service companies in Denver. Then I am going to pay for another extended warranty when this one ends in September 2014 and continue the process.Wake up Whirlpool!! If these units fail consistently at high altitudes (which every tech that has come out here has mentioned as an issue) then fix the problem or quit selling it in these areas.

The washer started to show error code for the door and washer would not restart. After removing the top of the washer and checking the door switch to see if there was a loose wire, I traced the wire back to the micro control unit, and upon inspection of the micro control unit, I found that the terminal that the door switch wire was attached to was loose and not making contact with circuit board.Although the washer is out of warranty being 7 years old, this is clearly not a part that is subject to wear and tear. The part was clearly manufactured poorly. I looked on the internet to purchase a new part but it seems that all micro control units are out of stock. This makes me wonder if one should start a class action suit as my part could be one of hundreds that was poorly manufactured. I called Whirlpool to see if they would send me another part to replace the bad unit but they said that because the washer was out of warranty, they could not help.

We purchased a Whirlpool Cabrio model # WTW6400SW3 in 04/08. Approx. 6 months ago, the washer started to be un-level during the spin cycle. This has progressively become worse, it now becomes un-level during the rinse cycle. We spoke with the appliance store where we purchased it, ;hey said the repairs could cost $400 or more. Thats nearly half of what it cost new. Like other complaints Ive read, cheaper washers have lasted years longer than the Whirlpool. Our last washer, a Kenmore, lasted 15 years.

Thank you Michael of Castleton, NY, for the posting about re-setting the microwave when it stops heating. Even if I have to do it once a month, it beats having to go out and get another one. And when that day inevitably arrives, guess which brand Im steering clear of?

I purchased a new Whirlpool Cabrio washing machine from DeWaard & Bode at Bellingham, WA in January of 2007. The serial number is **** and the model number is ****. Several months ago, the dreaded F1 code appeared. The code initiates when the washing machine is started and must be cancelled and started 3 times to continue washing. Later, with approximately 19 minutes left in the cycle, the code reappears and requires canceling and restarting another 3 times, at times 4. I have no extended warranty so I have no coverage for repairs. I also dont want to pay for a service call for what is most likely the computer module as evidenced from the majority of complaints online. This washing machine still looks new and works other than the inconvenience of having to stand by when starting the cycle to reset the code and then having to run upstairs later to reset the machine when its partially through the cycle. At some point, it will likely quit operating all together. I have purchased several appliances over the years from DeWaard & Bode and will be replacing all kitchen appliances again next year due to a planned remodeling but at this time, I do not intend to get them locally due to this issue. I have reviewed several comments online and feel that Whirlpool has a real problem with this particular machine that they refuse to be responsible of. I was offered an extended service plan for 1 year at $132.01 or 3 years for $336.61 but Id have to wait to be allowed to utilize it due to existing circumstances. Im not sure if a fix is actually available. The local dealer did not offer any assistance.

My 4-year old water heater has upper/lower sensor issues for the fourth time this year. The rep was supposed to send replacement parts to arrive today (day four with no hot water), but the wrong ones were shipped. A different rep called and offered to exchange the unit for a new one. The expense to me will be $350-$450 for the plumber to uninstall my unit, take it to Lowes and bring the new one back to install. The plumber suggested I take my $450 and just buy a new non-Whirlpool unit. He knew immediately that I had a Whirlpool hot water heater because its the most common repaired vendor. Whirlpool should be covering this expense for re-installation of their inferior product. Poor customer service. Day 4 with no hot water during the holidays with no solution in sight short of me purchasing a new hot water heater. Whirlpool finally got the right parts to me and I paid a plumber $190 to install. One week to the day later, my pilot light will not stay lit. No change in ventilation since it has been installed. I will say I have been dealing with their rep Chris on the phone who is extremely nice and I feel sorry for him. But we all have the exact same issue which is not being resolved.

We purchased a Whirlpool Cabrio washing machine on 3-18-16. In February of 2017 the washer died. I was bleaching my whites at the time so most of the clothes, whites fell apart because they sat in bleach and water for 2 days. I had to figure out how to get them out without getting bleach and water all over my clothes. I called whirlpool and they got someone to come fix it. The tech came and said we needed a new control panel. We waited 3 weeks for the panel. He came on 3-24-17. He put the part in. Took less than 10 min and said, All set. I went downstairs and put a few things in. I was a bit leery and the machine started. I went back upstairs and I hear beeping. I go back down and the machine is flashing again. I called the repair people they said, Unplug it for 10 min. It may reset itself. If it doesnt, call back. It didnt. I called back and wanted me to wait till the following week. I told her I had clothes in there.Someone came the next morning and said it needed a harness and they would order it. Well its the 28th and I havent heard anything. I have called whirlpool several times with no satisfaction. We had the machine less than a year and its been dead for 2 months. I am disabled. I have multiple sclerosis so every day is a new issue. I hate to put that in here but I want you to know what Im dealing with along with a dead washer. Any help you can offer would be appreciated.

I bought at Lowes. The first one was sent back (doors stuck, suction cracked lining). Now the temps are not working in the fridge or freezer. All the food got dumped. Its sad. My old one lasted closer to 25 yrs. (and may I add up to ten children). This one has only been used by adults. I thought I could trust Whirlpool?! I sent info to local Lowes. We will see if theres any help.

Whirlpool Duet - Steam cycle and sanitize on wash. Dryer is fast and automatic cycles actually work! Have had the washer 4 years and the dryer over 10. We like the Duet Washer because it had a steam cycle and a sanitize cycle plus it has a light inside that helps us see the laundry in our dark room or at night. Also we have been very happy with the cleaning - does a great job and gets the dirtiest clothes clean. The Fan Fresh feature and Delay Start are very handy especially for busy parents who may forget the laundry is in the washer.

Everything I buy from this company breaks all the time. I purchased these brands hoping they were good but apparently not. Always have to get them serviced. Lately they did an exchange on my fridge. Hope it helps because after thousands of dollars of food in the garbage it better work. And the washer thought, Oh Im paying more. It will be good. At this point will cost me less to buy from another company. Buyers beware. Cause the company cant do nothing good for me so dont buy from them.

Purchased new home with Whirlpool appliances installed Aug 21/17. Six months ago, I noticed that when I opened the door to the microwave over my range, the light flickered. A few months ago, intermittently, stopped working, now, not working. After reading the reviews, I am having the same problems other consumers are having. DEFECTIVE PRODUCTS! DONT BUY!

We purchased the Whirlpool Cabrio washing machine around January 2006, and from the start weve had nothing but problems with this appliance. Within the first year, water was leaking under the washer which was coming from a crack in the plastic housing of the water pump. I replaced the pump myself to save on labor. No big deal. The very next year, I started getting the F51 code and there was no way for me to get around calling a service company to have it repaired. $350 and one circuit board later, it was repaired. It remained working without fail until recently when it began giving the same F51 code. Let me guess, another $350 for better repair? I have to assume that the new circuit board that was installed wasnt any better than the original one that was replaced. I wouldnt put another $1 into this hunk of junk and Whirlpool should be ashamed to have this product on the market. I will never buy another Whirlpool product.

I absolutely HATE my Cabrio washer/dryer. I cannot get the mold smell out of my clothes. The clothes come out dirty and smelly. I have no idea what to do about it. It was a huge sacrifice to purchase these and a complete waste of my money. Whirlpool - please stand behind your products and take it back! Worst purchase Ive made in years.

I purchased a Duet Front Loading Washer (model WFW9750) in May 2010. In September 2011, the noise level had become intolerable. I called a local service company. They advised me that the main bearing was bad. It would cost more to repair than what it was worth. I contacted Whirlpool. They could not do anything unless the machine was inspected by one of their authorized service companies, which they scheduled. Two weeks later, A&E Factory Service arrived and confirmed that the bearing is bad and the cost to repair will be $1,542.06. Whirlpool customer service transferred me all over the country to tell me that the machine was out of warranty and there was nothing they could do.

Ive had my Whirlpool water heater for almost 4 years now and for the last year and a half, I had to have the pilot light lit at least 5 times. I finally got so frustrated around the 3 times and called the company. They gave me instructions on how to light it and to ensure no draft was around the tank. A couple of weeks ago, it went out again and I called. This time I was told to replace the thermocouple. I did that and guess what? Still no hot water. Im a single parent with 2 kids and weve been boiling water just to bath.A service tech came out and told me I need to replace the tank altogether. I called Whirlpool service and they told me it was nothing they can do. Like many of you, I got this tank from Lowes and they will not do anything about it either. Its hurtful and stressful that doing a holiday season, I have to decide to either buy a hot water tank or give my kids a good Christmas. I know several friends and family who has had their tanks a lot longer with no problem. My problem is its a crappy Whirlpool brand with poor customer service.

On August 16, 2016 I received delivery of an Whirlpool under counter refrigerator that I ordered online from Home Depot. Model # WUR50X24EM. Five months later, on January 10, 2017, it stopped working, I called Whirlpool for repair. They referred me to their service company, I called the service company the same day. They had a repairman out on the following Tuesday, 1/17/17. The repairman said that he will need to contact Whirlpool to order a part. Whirlpool sent him the wrong part. After numerous phone calls no one from Whirlpool could figure out the correct part number. The repairman kept sending over pictures and information on the correct part, but this all went nowhere with Whirlpool.On 2/7/17, I called and started yelling. I had been very patient up to this point. I was finally offered by Whirlpool a parts research to determine exactly which part was needed. Plus a $50 Visa card to appease me. At this point, its been four weeks without a refrigerator and no one from Whirlpool has put any effort towards trying to figure out the correct part. On 2/16/17, I called Whirlpool again to find out if they had found the correct part. They told me that the new part had been sent to the service company and Whirlpool scheduled me an appointment right then for Monday, 2/20/17.So today is 2/20/17, the repairman came and went, Whirlpool once again failed, they lied because the repairman came out with the wrong part that was originally sent to him when he ordered the part back on 1/17/17. I called Whirlpool and asked for a manager. They connected me with the Resolution Specialist. I told her everything and pointed out that it has been six weeks without a refrigerator. She said she will take care of it and get the right part ordered. I asked her how long I should have to wait, cause at this point I have waited long enough. She said she will have an answer by the end of this week. I dont believe her, I feel as though Whirlpool is pacifying me. I dont understand why they cant order the correct part.I have no faith in Whirlpool that they will do the right thing or have any understanding on how inconvenienced they have made me. I have no faith to the point that I ordered another refrigerator from a different manufacturer. It will be here tomorrow between 8am-12pm. Oh, and Home Depot, they washed their hands of this a long time ago. And, I have yet to see the $50 Visa Card.

I have raised complaint regarding my refrigerator and changed compressor and they given me 1 year warranty but after 3 days again compressor gone and they have came and replaced that and taken service charge. Again after one month compressor giving problem and freeze is not getting defrost.. Again I called to customer care but again they want Visiting charge.. Really pathetic Service I ever seen. And customer care people does not know how to handle client and repeating same line. Dont buy anything from Whirlpool.. its worst service provider.

We bought a Whirlpool with convection oven, it is beautiful and very well designed and fully electronic. You can only control it via touchscreen Which, when the software runs into blocks, it is impossible to troubleshoot efficiently, you just have to wait until it completes its rebooting. It is very frustrating to spend hundreds of euros in a device you just cant control when it crashes. Horrible programming made for a horrible user experience. You have the feeling of not being able to use it or fix, it is like having a mobile phone or computer Which only works on what appears to be a random logic. The errors displayed on the screen are often vague and the user troubleshooting manual is just plain short. We will return it without doubt and dont recommended ever buying this device.

I purchased a total of four Whirlpool appliances in June of 2008. Almost thirteen months after the installation of all four appliances, I experienced a problem with the control panel on the Gas Range GW397LXUB, and a sensor control problem with the Microwave GH5184XPB5. Fortunately, Whirlpool agreed to repair the appliances at no charge because it was so close to the end of the warranty. The microwave was an easy fix and simply had to be unplugged, reset and plugged back in. However, the entire electronic control panel had to be replaced on the gas range. Several of the buttons simply stopped working and I was only able to bake at 350 degrees. Again, almost thirteen months after the installation of the new control panel, it happened again. Same buttons stopped working. When I contacted Whirlpool, they refused to replace the part because I was no longer under warranty. Whirlpool refused to admit that there was a problem with the control panel, so I guess it was a crazy coincidence that I experienced the exact same problem on both. I filed an official complaint with Whirlpool in hopes that if enough people do so, they will issue a recall. I am now experiencing a problem with my refrigerator ED5FHAXSB03. The fan vibrates so loudly that you can hear it throughout the entire house.

I purchased Whirlpool gas range with AquaLift Self Cleaning Tech exactly a year ago. DOES NOT WORK!!! The only Self that cleans will be you on your hands and knees. Still dont know what to use. Manual says do not use oven cleaner or abrasive or you void the warranty. Ok Whirlpool any suggestions? Soap and mild detergent not cutting it. You would think with all the customers complaining about this feature the bright engineers that designed this would come up with a solution.

Last week dishwasher leaked. Set up repair with our local gas company that has service plus. Came today. Repairman showed me there is a hole in the bottom of the tub. Upon closer inspection it looks like the manufacturer drilled a hole that wasnt needed so they routed out a depression in the tub and must have put in some sort of plug or filler of some kind which now came out. I called Whirlpool and explained to lady about the defective tub. She said well if it had a plug of some sort put into the tub it would have fallen out before this. I said Well it didnt it just must have happened as it never leaked before. She said it is no longer in warranty. I told her this is a defect to me as if you drill a hole in the tub that wasnt necessary and then the plug failed that you put in to hide the extra hole. It is a defect not a warranty issue. Upshot is she wouldnt do anything about it. I told her I have always bought Whirlpool but if this is their policy its the last time I buy anything made by Whirlpool. After reading all the complaints registered here about Whirlpool I guess I am more than fortunate as my dishwasher (bought in 2006) had run great until their plug fell out (Great except for all the rinse aid that has leaked out for several years.).

The oven was brand new and the computer went out with the warranty. Replacing the computer, with labor, was as expensive as the range. I have owned several similar ranges made by other brands and have had no major complaints. However, I will never purchase another Whirlpool product again!

Purchased both Cabrio washer (wtw6200sw2) & dyer brand new in 2007 for $1200. Within 4 years the motherboard went out. Whirlpool didnt want to fix it. They said it was past warranty. After many complaints to corporate, they sent someone out to repair it for $496 (they paid). Repairman said these models had motherboards from Japan & Whirlpool was aware of the many issues, but wouldnt do a recall. 2009, the springs went out, 2011 F codes began to appear. Clothes dont get clean; not enough water. 2014 & 2015 DU & DL codes appear. Now I need a new Lid latch assembly. These washing machines are not worth buying. Never again will I buy another Whirlpool!! My mom had an old Kenmore that lasted 20 years and only needed a replacement belt. No more fancy high end washers for me!

I’m disappointed in this dishwasher, it’s not yet a year old, and it doesn’t clean the dishes, and it also does not dry them. I now wash and dry my dishes by hand, the machine stays soaking wet even two weeks after running it.

I thought with the big tub I would be able to wash my king size bedding and other large things. Theres barely enough water to wash a small regular wash. Since it has no water it does not clean my clothes. Why the big tub if you cant use but one fourth of it?

Whirlpool Cabrio washing machine: The washer was purchased in March of 2012 and malfunctioned in December 2014. After phoning Whirlpool, the machine was scheduled for repair with a factory-authorized company. The first repair attempt was unsuccessful due to a lack of parts. It took 10 days for the parts to arrive, and another unsuccessful repair attempt was made. The verdict is that a new motor control board, costing $350 plus labor, is necessary. With the delay in service and cost of repairs, I may as well buy a new machine.

The home I bought a few years ago, had brand new Whirlpool appliances. The oven and range, work great, although it does take my oven seems like a long time to get to temperature. The size of the oven is great, has plenty of room to cook lots and/or large amounts. The range, works really good too. Its a glass top range. The glass is very durable, I find it does not scratch easily. Cleans up well by just using a good glass top cleaner. I do have one of the burners, does make a little noise if used but 4 years in, no issues out of the range or oven.

It was not a good experience after I purchased a Whirlpool washer in Feb 2014. I have been going to Laundromat 5 months since I found the door did not able to secure. I reported in January 2015 and technicians from 3 different contractors made more than 10 visits for checking and replacing parts. Not only nothing gets done, I also missed work for all these days. Then I escalated to the Supervisor, ** and Miss ** in Executive Office of North American Region. Both of them are very nice that they understand the situation and how frustrate it is. Finally, ** said Whirlpool would replace it. ** told me that I should get phone call from H.H. Gregg within 48 hours. However, it has been two weeks and seems no one care. In this three days memorial weekend, I still need to go to Laundromat while they are enjoying BBQ with their friends and families. I dont know how long it take to replace it.

I have purchased a Whirlpool refrigerator and it has passed only 1.5 years and I have repaired it twice. The cost of repairing is also very high. Service charge is very high so I called a local party to solve the issue. They checked and found that a capacitor and a compressor relay is not working. They replaced the two and debited a cost of Rs.1500.

Purchased a Whirlpool WRF990SLAM fridge in 2013. Ice maker went out and the evaporator. Service tech said he needed permission from Whirlpool to work on. Would definitely not recommend purchasing this brand.

I purchased a Whirlpool range YGY399LXUQ in 2012 from a great local appliance store, Trail Appliances. In 2013 the control panel stopped working and I contacted Trail. They quickly came out and replaced the control panel. In 2014 the same issue came up, but Trail could and would not do anything so I contacted Whirlpool Directly - they came out and replaced the control panel. In 2015 (same month) the control panel is not working AGAIN and Whirlpool has washed their hands of it. A replacement is over $400 + installation. The stove is barely worth that much. I would have thought that they would stand behind their product, in that this is an obvious continual issue or at the very least the service that they provide. I would not recommend their ranges to anyone because they will not stand behind what they product nor will I ever purchase anything that Whirlpool makes as it is obviously low quality.

Purchased the Sears Oasis (made by Whirlpool) washer and dryer almost 4 years ago and I have worked on these machines more than the Maytag machine and dryer I used for over 22 years. Electronic and mechanical problems. One recurring problem is loose change working its way into the drain pump on the washer and it knocks a hole in the side of the housing. You later discover it when you go down to the basement and find about 50 gallons on water on the floor. Very poor design! Never happened the first time with the Maytag.

BFG2F4040T3NIV IS HORRIBLE. This water heater is JUNK. The release valve has released and flooded my basement 3 times in the past 2 years and the recovery time on water is terrible. Whirlpool needs to step up to the plate and refund everyone who purchased one of these. Every review on this unit is horrible. DO NOT PURCHASE a WHIRLPOOL water heater!

Whirlpool Refrigerator WRS526SIAH00. Well we have always had a lot of trust in Whirlpool appliances over the years. Just about everything we have is Whirlpool brand including water heater. We remodeled our kitchen and bought a new refrigerator in July 2013 (just for the color/look change). We have had nothing but problems from day one with the water/ice dispenser water may or may not work. Now (AUG 2015) the refrigerator side started freezing our food, milk and tea gallon jugs frozen solid. Went down a self fix list on an appliance parts website using our fridge symptoms, said it was probably the bimetal defrost thermostat. Replaced that part. It didnt fix it.So I did my own troubleshooting and found the cold air was continuing to push from freezer into fridge area, found this cheaply made plastic damper broke and stuck open. Now that part will cost another $50+. Whirlpool knows about these cheaply made parts they have put in these appliances. You cant even get to this part without taking things apart. This is a cheap manufacturers plastic part and Whirlpool knows it. Its not the consumers fault. It was a joke when we received an extended warranty offer from Whirlpool for just $208 per year or $626 for 5 years - I wouldnt spend another dime with Whirlpool. The price is high because they know how many parts are breaking on these units. You shouldnt have any repairs for 10 years on a refrigerator. We are stuck with a lot of Whirlpool products now, but we are done with this brand. Dont waste your money.

I purchased Whirlpool top loading washing machine model # WTW57ESVW less than 2 years ago. It stopped working yesterday. I had a trusted professional repairman evaluate it today. The motor needs to be replaced after less than 2 years?! The customer service reps basically said sorry. I should have purchased the extended warranty. Is it not reasonable to trust that a Whirlpool washing machine motor should last more than 2 years.I am very unhappy and very angry that Whirlpool will not stand behind their product. The last customer service rep I spoke to suggested she could send one of their repairmen and replace the motor at a cost to me of $299.00. So, after less than 2 years, I am offered an amount to pay of about half the cost I paid less than 2 years ago for the brand new washing machine. My home is full of Whirlpool appliances. I have been a good and loyal customer for over 30 years. I am very angry and upset with Whirlpool. Please explain to me why it is not reasonable for me to trust and believe that a Whirlpool top loading machine that is well cared for and not abused in any fashion should last longer than 2 years? Is this being a loyal Whirlpool customer gets you, I should have purchased the extended warranty”? We are talking about a motor here, not a fabric or bleach dispenser that breaks. Although, those parts should not break either, there is a big difference from something like that and a motor. Please contact me as soon as possible at either number listed above. Thank you.

My husband and I purchased a Whirlpool over the range microwave in 2005, model number MIX155XHPT-1 and serial number TR S 30 32419. At first the top vent broke then the opening side broke off. Then the whole side of the closing door broke off. Now the whole door wants to fall off. I would have never expected this from Whirlpool, but it happened.

I had my Whirlpool front load washer stop working all together. Well the pump went out it filled up with water and shorted out the circuit board/control panel. Was going to cost more to repair it than to just go get a new one. I will never get a whirlpool ever again.

The Whirlpool duet front loading washing machine came with our new house five years ago. That machine has destroyed multiple clothing items including very expensive sweaters and undergarments. It has destroyed biking shorts and just about anything of value. Even destroyed the bags fur delicate clothing. I have to get a repair guy out every year to replace the bellow too! It is terrible!!!

On 2-26-13 I received my new Whirlpool Refrigerator, Model WRF989SDAE, KSN 4191832, 28.6 cu ft, french door for a price of $2500.00. November 2014, refrigerator stopped working. Though it was not under warranty any longer, the repair company advised me that the problem was a warranty item and repaired it at no charge. This process took several hours of work by the repairman and two visits. He advised that this is an issue with the refrigerator and Whirlpool is aware. Now, May 2015, only 6 months later, ice is building up on the back wall of the freezer and the freezer is running constantly and very loud. Bringing in repair person, hopefully before it stops again. Appears to be related to the initial issue. I cannot trust this refrigerator and would highly advise everyone not to purchase a Whirlpool refrigerator. Refrigerator needs to be replaced, not repaired.

Bought set 12/5/14 at Lowes Tucson. First load came out with shirts looking like theyd been scrubbed with sandpaper. Called Whirlpool & was advised to use higher water level for loads. Then noticed small hole in my favorite shirt. Oh well. Next I found an area in my king sized bottom sheet with several holes and torn fibers. Thought maybe it might be from my toenails, except it wasnt where my feet would be. Finally a pair of capris (just worn twice) found with same type of holes and torn fibers. Dryer also inefficient. Balls up clothes - outside dry; inside wet. Re-run one or two inside wet pieces and they dont dry at all! What kind of technology is this?

We just purchased a new fridge - September 2021 -- Whirlpool side by side. Why is just okay? It is a loud refrigerator. A roaring sound is pretty constant. The ice tray in the door has no recessed tray ... so water and melting ice just follow down the front of the door and onto the floor. Two days after purchase we went back to Lowes to return this fridge ... but all the other refrigerators do not have a recessed ice tray. And since they are not plugged in ... who knows if they roar.

I bought it on 11-24 13. I called Whirlpool on 1-29-13 and got no response. I called 3 or 4 times and still havent heard from them. Its now 4-1-13 and still nothing. I tried many times and got the runaround from them. They owe me money for repairs to the heater. I will not ever buy from them again. Just thought you all should know about this.

Ive had this dishwasher for years and never a problem. My dishes are always clean and this dishwasher dries my dishes completely in a very short amount of time.

Bought a new side-by-side in 7/2020 from Lowes in Keller, Texas. Salesman won me over with the buy American pitch claiming if the need ever arises for parts I would be far better off than with LG which orders their parts from South Korea. I bit, and bought, and now regret. The refrigerator dispenses water randomly and I must keep a glass under the dispenser all the time and empty it when it gets full. Under warranty they say! Well here it is September and after being on hold for an hour each time (6 times as of today) I attempt to get help they tell me that the part W11293378 is not available and will not be made until after this month? BEWARE this brand. This is a poorly ran company and buyers would be better served to look elsewhere.

We bought a Whirlpool front door open washer machine from Best Buy on Oct. 2, 2011. We didnt start to use until our basement got finished. In November when the basement was ready, we found out that the machine didnt work at all. We called A&E factory service as suggested by Best Buy. They sent technicians 3 times in 2 months to check the machine. Now, it is 3 months later since we purchased the machine, the machine is still not working. We contacted Whirlpool, and they would not exchange to another machine, instead, they told us they will send another technician to check it once again. This machine costs us $800 before tax, but until now, it is still not working. Can you tell us what to do? We called Best Buy and they said this machine is under factorys warranty. So we called A& E service, who said that if Whirlpool called them, they will tell them it cannot be fixed. However, they need Whirlpool to call them because they work for Whirlpool. Is 3 month waiting not enough for a brand new machine to get fixed? And the worst thing is we still owe money to Best Buy creditor. Please help us to get rid of this! Thanks!

My wife and I purchased the Whirlpool calypso washer and dryers and have been regretting ever purchasing a Whirlpool product. Not more than a year and a half after spending thousands of dollars on their products the troubles started. I called the company and they sent someone out to look at it for repair. He vacuumed out the lines and kept restarting it over and over and eventually it started working again and they charged a hundred dollars and something and said there most likely be more problems since they have many calls on this issue. Sure enough it started again and just kept retrying it over and over to get it to work again as well as vacuumed the lines again like he did. Now its at the point it will not work no matter what. It just keeps flashing LD and shuts down. So I did a online search for other consumers having the same problem and was shocked by the amount of the same problem with others (search this model flashing LD and you will see for yourself). When I contacted Whirlpool they played dumb and lied right thru their teeth saying they have no issues with this model and refused to do anything. I have since learned there has been court cases where the courts ruled against them saying that it was defective and had to notify consumers which they never did. Even when the repairman came out nothing was said. I have since learned that all they did was changed the name to a different model which is having the same problem (no kidding!!) and continued to rip the public off in the name of CORPORATE Greed!!!!! I advise everybody never to purchase a Whirlpool product ever again and maybe we can bankrupt them and put them out of business where they belong. All the customer service agents deserve to be unemployed and suffering after long waits on the phone and then lying straight face to the consumers. Pure evil!!!! We all have to stick together and bring these criminals down. How can they say we have no issues when a simple search of Whirlpool Calypso problems with draining and flashing LD and shutting down. There are thousands of people complaining and no action is done. Shame on these people and their souls are lost forever. Never buy a Whirlpool product and tell everybody you know to stay away! They should have their ** and/or ** cut off and have to suffer the same way the struggling consumers are after scrounging up thousands of dollars for a 200-pound metal paper weight that aint worth a damn!!!!

So, I have a house full of relatives from out of town staying over and as luck would have it, my Whirlpool water heater (model # BFG1F4033T3NOV) which I had installed 15 months ago, decided to stop working. The pilot light went out and would not stay lit no matter how long I held the red restart button. I called Whirlpool customer service and was informed straight away that their computer system was down and they wouldnt be able to order parts if I needed them (great start right?). I explained to the woman on the phone what my issue was and also told her that after searching online, Ive found that this is a common failure with these hot water heaters that Lowes sells where the thermal couple is defective and needs to be replaced. She began to inform me that before any parts was ordered (which she couldnt do because the computers were down), I would have to clean the vent openings on the bottom of the HW heater. No big deal. Then, Id have to have my gas line pressure verified by my gas company (what?). If both were found to be fine, Id have to confirm that my flue is at least three feet above my roof line before they would send me parts to repair my unit. This is about where I lost my mind.I run the RMA/Customer service department in my company and if anyone has issues with our products, we ship first and ask questions later. How can a company with known defective products give their customers the runaround and basically tell them that they are screwed until they can take off time from work for a gas co. to come to their home and will also have to have flue replaced before theyll warranty their product?! Whirlpool should be ashamed of themselves and Lowes should distance themselves from such a crappy company with substandard products and shoddy warranty practices. Ill never buy another Whirlpool product as long as I live and will warn anyone away from this company.

Yesterday I purchased this Whirlpool top load washer model WTW4816FW with agitator and we installed it at our vacation home and I started a small load to wash. Yikes, it made noises like a machine that is on its last legs. I knew from washing clothes for 40 years that this is NOT right. We, hubby and I waited and listened to this piece of junk to finish the cycle. Thank god I had set it for a short wash. We also videoed this contraption while it was grinding. I called Lowes and politely told them I was returning it. Thankfully they never had a problem with us bringing it back. (This must happen often.) I go back to the appliance department and decide on a Maytag. I noticed that it looked like the junk we just returned. I stood there and looked up the model number online and lo and behold there was a video of it doing exactly the same noise. It was virtually the same machine I just returned with just a name change. Needless to say we left the store washerless until I can research this further. I then found out that Whirlpool now owns Maytag. Thing is I just bought a front loader Maytag for my main home and it works good. It was a replacement for a Whirlpool without a agitator which worked well too. The YouTube videos seem to be washers with agitators doing this. I just wish I could post the video for all to hear. I guess we are all at the mercy of big companies who dont care if they make a good product as long as they can make it cheap.

Exterior metal reaches temperatures that cause minor burns on an adult finger and could be potentially more dangerous for a child. The self-clean feature has crashed the oven on two out of three uses of this function and overheats handle.

The stove is okay except it scratches on its glass surface fairly easy with the non-stick pans. Also wished it had a self-cleaning oven. Its not the easiest to clean on the inside of the oven. The knobs are easy to use but its hard to navigate knobs to low to keep food warm rather than cooking at a low temperature. It has strong exhaust fan that really does its job.

We bought the Gold Series Whirlpool fridge (Model WRF990SLAM00) in December 2013. A few months after its first repair, (dripping on the top left inside of the fridge), which happened within the first year and was covered by the manufacturer’s warranty, it started to make an incredibly loud whirring sound that kept us up at night. Our bedroom is upstairs and far away from our kitchen, and I had to sleep with earplugs to not hear the noise. We tested the noise on a decibel app and it came in between 66-70. A normal fridge noise level should be around 52 decibels. We had a repairman come out and he replaced a fan even though he told me it wasnt going to fix the problem. Wait, what? After he replaced the fan and the whir continued, we called Lowes extended warranty again, and they sent out a different company: 1-800-Appliance.The second guy replaced two kits and found some issue with the ice maker, which we were not even aware of, but the noise remained, and he then had the gall to say it was a normal noise. If it was normal, wouldnt it have been making that noise the first year we had it? We had 1-800-Appliance come out again and he determined he couldnt fix it, so Lowes sent another guy from the same company, and he replaced the same fan that the first guy replaced, which was clearly not the problem. Three perfectly good fans were wasted. BTW, the repairman who said the noise was normal told us that the fridge had a part that was made to be replaced after purchase because if Whirlpool had the part at the point of sale, the fridge would not meet the Energy Star standards. Hello, lawsuit! After three repairs for the same problem and five visits that did not fix the problem, we were told Lowes would issue us a return order in three days. Finally!Not so fast... one week later, no one called, so I called them and then Lowes denied having told us that! We gave them the name of the person who told us they would take the fridge back, but the woman on the other end said she had no record of that (how convenient) and, despite the California lemon law requiring only three attempts at a repair, they would require yet another attempt by one of their repairmen. She told me that if he determined the noise was abnormally loud and not repairable, then she could contact the manufacturer and go from there. So they sent a guy from the first company out and he wrote down that the fridge was not repairable and was very noisy. He said that should take the fridge back at that point.My husband called Lowes several days later after not being contacted by them and they told him that they need to send a different repairman out from 1-800-Appliance and that only 1-800-Appliance could determine if we could get a refund. If that was true, then why send the other company out? By the way, the second guy sent out by 1-800-Appliance wrote down that the noise was very loud and wasnt fixed by his repair. But the notes Lowes said they received from him didnt say that at all. They told me that he wrote that the noise level was normal. I am starting to think there is collusion between Lowes and 1-800-Appliance. Something very wrong here. So, six visits later and horrible customer service from both Lowes and 1-800-appliance, we are now being told that the repairs need to be 30 days apart from each other before they will issue a return.If the cause of the noise was never actually repaired, then why do we have to wait a month between repairs? We continue to jump through the hoops that Lowes keeps throwing our way, but it is now clear that they have no intention of taking the fridge back. The fridge is less than two years old, and we have the extended warranty. We couldnt take the noise any further because it felt like it was causing hearing loss and after several months of that horrible sound we were both on edge, so we bought an amazingly quiet fridge from Pacific Sales, and they assured us that they would not do to us what Lowes did. Pacific Sales pride themselves with having good customer service. Lowes seems to have taken delight in lying to us, selling us a lemon, and then not righting a wrong.We have moved the loud piece of ** into our garage, and if Lowes continues to change the rules of a return and act in collusion with 1-800-appliance, probably in hopes that we will simply throw in the towel, then at least we dont have to hear that horrible sound in the meantime. If they dont do the right thing and take back the fridge, then we will simply keep calling out a repairman to fix the problem. We have three more years of our warranty, and if Lowes doesnt do the right thing, we will make them pay for this one way or another. Viva la revolucion!!

These machines are designed to clean your clothes by rubbing them together which they attempt to do in a minute amount of water. They destroy the fabric, pull the seam out of shape, wrinkle them beyond the point of wearable, do not get them clean and do not get all the detergent out. I have had clothes come out partially dry. They also do not dilute the fabric softener, leaving unremovable stains on your clothes. In addition, they take forever to do a load of clothes even without the extra rinse you need if you want any hope of getting the clothes rinsed. The dryer is the slowest dryer I have ever had. The steam refresh that is supposed to get the hideous wrinkles out of your clothes does not put steam into the dryer. Instead, it sets the dryer to the highest heat so that those clothes you did not want on high heat are now getting it; then it shoots bursts, yes large bursts, of water on them. Your clothes come out a combination of still wrinkles and wet. If you hear of a class action suit, please contact me. These machines should be recalled.

I purchased a house with Whirlpool products installed. The refrigerator wasnt too cold but working for the first 2 months. Then the ice maker stopped working, the freezer stopped working and now nothing works. I have been through 4 service calls, I repaired that took almost 2 hours and the refrigerator is still not working. I have spoken with numerous Whirlpool representatives and they were like robots with respect to their response. There is a chain that they adhere to and once you have spoken to an executive at their corporate office, no one else can help you. Now I am trying to reach that executive and there hasnt been a response. I havent been able to have food in my refrigerator for over 3 weeks and counting. Imagine, eating out for breakfast, lunch and dinner for this length of time. Christmas - no refrigerator, New Year - no refrigerator. A consumer who makes a purchase in good faith should not be put to this kind of agony while trying to remedy the situation. I dont know what happened to their customer service but it is nil. From my own personal experience and in my opinion, Whirlpool is not a company that cares about their customers, just their profits. I am at a loss . What are my options as a consumer?

Mold in my dishwasher right after having washed the dishes!! This is the first time I have seen the mold on the racks (lots of it!). However, my neighbor also has a Whirlpool and complains of the mold all the time. Also, my dishes often do not come clean. I would not have purchased a Whirlpool, but it came with the house, three years ago. Therefore, I do not have a receipt for it.

I will never buy another Whirlpool again or recommend them to anyone, and discourage anyone from buying one. I bought a Cabrio washing machine just over 2 years ago and yesterday I received an F51 error code. The manual says that this code requires a technician to come a check for repairs. Well, before I do anything I google the problem, and lo and behold there are thousands of complaints about this issue with the Cabrio models. Some saying that what needed to be replaced were a control board ($280) and a rotor (unknown amount), not including the price of labor. Some said that Whirlpool knows about this problem and they covered the parts and repair. This didnt get my hopes up, but I called customer service and of course they said that there were no reported issues with the model and that what I found on the internet was probably an older model. Of course! The lady on the phone told me that they would not cover the costs and it would be anywhere from $300 to $500 depending on the route I wanted to take. That is a 1/3 to 1/2 the price I paid for the machine. This is ridiculous! I am tempted to just get rid of the washer and go with a better company that actually cares about their customers. This error code was definitely something they know is a big deal if there was nothing I could do about it other than call a technician. I paid almost $1000 for a machine that has barely lasted 2 years before I have to pay money to have it fixed. Not a company I would ever purchase anything from again!

Since May 3, 2016, five servicemen have failed to repair my Whirlpool refrigerator (WRF560SEYM), which is less than 2 yrs old. One trainee from A&E Factory Service had the nerve to reinstall broken parts. I have been completely without refrigeration for the past 48 hrs only to learn that the repairman scheduled for tomorrow has been cancelled because AIG warranty has not approved his visit. Further investigation reveals that the parts were never ordered, pending approval from AIG. Whirlpool cant help me because AIG has not declared the appliance unfixable. Hhgregg cannot help. I have spent countless hours on the phone on hold & wasted hundreds of dollars on spoiled food. Dont trust Whirlpool. Theyre not the company they once were. Their warranties arent worth the paper theyre printed on. Buyer beware!

Problematic... constantly out of balance... and will Not spin out due to this.. Sensors are very sensitive... have to unload and reload.. Most times have to wring out by hand.. Definitely a defect of these machines.

I have Whirlpool gas range, model # WFG361LVS1. The igniter went out after only one and a half years of light use (4-5 times a week). I did not buy the extended warranty, so part is not covered. I only asked that they send me the part for free. I talked to a supervisor at Whirlpool (Dave). He said I should have bought the extended warranty. He said he could not help me. He was also very rude. I will never purchase another Whirlpool product.

My review merely echoes the other 1-star reviews Ive read below, but Im including it anyway. We bought the Whirlpool Cabrio from Lowes in 2013. Two weeks ago, a mere five years after purchase and shortly after our warranty expired, it broke. It kept showing the UL code and took multiple cycles to wash the clothes. Unacceptable. We called the technician; he came out; told us it was the bearing that busted; and quoted us $800 to fix it (I noticed below another customer was quoted $400 for the same issue). We told the technician thanks but no thanks and purchased a $450 Samsung washer. Our family will never purchase any Whirlpool product again. From their customer service to the performance of their machines-- its all very much lacking.

Whirlpool claims this technology works to clean the oven; however after one month of use and one casserole spill, we attempted 3x to use this system and the cleaning process was a total failure. The gravy spill on the bottom and mild oil residue on the sides from roasted vegetables was the same as before the cleaning cycle was tried. The cleaning kit accessory from the company was a joke. It consisted of 2 sponges and a small scraper! We purchased the slide in model WEE745HOFS. Buyers of any and all Whirlpool products with Aqualift BEWARE... It does not work. We have since replaced the product with a range with the traditional cleaning process system that has worked for decades in most major brands.

We moved into a new home (brand new construction) in Dec 2018. The ice maker/water dispenser has never worked. Weve had 2 different repair people come a total of 5 times to no avail. Now have to deal with Whirlpool directly to deal with Warranty. Will Whirlpool offer a new fridge? No, they will send a replacement door. 8 months later and we still have a fridge that does not work. Not impressed with Whirlpool and extremely unsatisfied with the produce. Do not buy this brand.

Updated on 02/13/2021: Company fails on customer service. My stove’s trim is rubbing off on my Whirlpool stove only 6 months old. No chemicals were ever used to clean the surface. This trim piece surrounds the controls and is not covered under warranty. An expensive cheaply made stove. Multiple attempts to have the piece replaced got nowhere. A letter sent to the head office was deferred back to customer service. Whirlpool has lost credibility and I will no longer buy their products.Original Review: So disappointed to find the paint finish coming off the trim on my 8 month old Whirlpool range. No harsh cleaning chemicals were used. Only mild dish soap and a microfiber towel. The trim, attached to the control panel on the front of the stove, is not actually stainless steel, but painted to look like stainless steel. Whirlpool warranty doesnt cover esthetics and refused to replace the trim, stating replacement would include the entire control panel and it is not covered under warranty. So be prepared to have your new expensive stove look old in a matter of months.

I purchased the Whirlpool Duet washing machine October 2010. When I first got the washing machine, it shook the house (new stick built house) when it was on the spin cycle. They had a repair man come out to tell me that there was nothing wrong with it, it was fine as it was. We thought it was ridiculous, but we are young and didnt know better. He also told us we should fill up the washing machine more than what we where because the clothes wash better when its packed. Big mistake on our behalf! The washing machine has ate thousands of dollars worth of clothing. We did what we where told, so we thought we were doing something wrong. Little did we know we were doing nothing wrong. It was the machine. Then a sock found its way to the drainage field which let water pour out of the washing machine throughout the laundry room and going to the rest of the house. What a mess. We called and they found the problem and removed the sock. Still didnt fix the damaged clothing issue. I called them 1 year and 7 days after we got it and Whirlpool still wont cover their product. They said they where sorry they couldnt help. Well couldnt and wont are two separate things. Its a shame they wont stand behind their product after I bought over $6,000 appliances from them. You think theyd be a little more compassionate to their customers after spending that much money? Now you know how they treat their customers. Dont buy Whirlpool. They (Whirlpool, Maytag, etc. ) are maybe cheaper than their competitors, but its probably worth the extra money if you know theyll stand behind their product. Very unhappy customer!

I purchased this washer (Whirlpool Cabrio HE) 2 years ago against the advise of many people including my husband due to the cost, $850 for what is now no more than a large paper weight! It had never really done a good job at cleaning our clothes. About 6 months ago, it started not spinning enough to remove all the water from the load. I thought, no big deal, I will just use the extra spin cycle. It became the normal thing - wash, spin, extra spin. Well, then it became wash, spin, extra spin, extra spin. I noticed 3 months ago that it was not even agitating. It fills up, sounds like it is agitating and then drains. There was no movement from inside at all. All along I am getting from my husband. told you not to buy it! I gave in and called the repairman - $185 for a console, $26 for a sensor and $55 for a couple of drum clips and then the $35/hour for the repairs. I would rather spend a couple hundred dollars and buy a washer with an agitator that really works. I would never recommend this washer to anyone!

Whirlpool Duet 2009 Model WFW9400SW02 - Worst experience ever with a new Whirlpool front Load washing machine. It broke down with error codes F28, F70, F71 13th month just after warranty and was leaking water. Bought 1 yr 153.00 Whirlpool extended warranty. Many reviews in internet have same complaint. Immediately had it repaired after waiting my 60 days to use warranty, but did not work after the door latch switch and one of 3 main circuit boards was replaced which was over $600.00. That was 2 visits. Fired them and had warranty company send different repair Co. They came twice with a cost of $840.00 and worked for 30 days and then had no power. 3rd repair company came out and wanted $350.00 to order part. I was offered $1195.00 cash or $1499.00 replacement top of line Whirlpool WFL98HEBU. Nice! But only 1 year warranty and I had to pay 200.00 shipping. I decided to take the money since I did not want to risk the break down on the new washer. The reviews on the new washer were not favorable with break down as the main complaint. 4 repairs in 1 year is lemon law on my warranty. My repairs were 4 in 45 days.

I have a double door refrigerator with a bottom freezer. It is slightly over 2 years old and has been in use for only 7 months of that time. We just got off the phone with Whirlpool service. They will cover the cost of the control panel and defrost control. The other one I paid to replace was only one month old and it failed again. In the time between that I had to have an Icing kit put in as the Ice maker was causing ice to form inside the back wall of the refrigerator. My first call to Whirlpool was very unsatisfactory. I ended up paying for the part and the service call. The second call was about the ice-maker and they were aware of the problem and sent me a repair kit for the problem. I still had to pay for repair service. So far I have paid $561.62 for their defective parts and service calls. This time my wife called (while I was taking my frozen foods to my neighbors freezer for the second time) and went through 3 people before being told the part was still under warranty and they will send a new one. When we pushed for proper service we got it. We should never have had to go through all this. We also lost over $300.00 of frozen foods. Never buy a Whirlpool refrigerator!!!

I purchased a new gas water heater and had it installed by a plumber. It worked for 3 weeks then we lost hot water. I called the 877 number and got shoveled around to 3 or 4 people. I got hung up on twice then spent 45 minutes repeating all the instructions that are on the tank to relight the pilot light. They agreed to send a new valve. The first time, I never received the valve (after 10 days) and had to call back. The second time I called in, I spent 20 minutes trying to get another valve sent. The valve I, finally, received had plumbers dope on the back and clearly was previously used. Had the original plumber replace the faulty valve? And lo and behold, the second valve didnt work either. I have no idea why a gas water heater would have any issues after 3 weeks. I bought it brand new from Lowe’s. It is obvious that Whirlpool makes shoddy products. They have very poor customer service and care little for the customers’ time either in correcting the problem or being without hot water. I have spent over 2 hours with Whirlpool. Only to 3 weeks after the initial call, I still do not have hot water from a heater that is less than 2 months old! I called them on the issue of the second valve not working and they put me on hold (after 10 minutes the line went dead and I was disconnected) despite the fact I asked them not to do that!

It will constantly go off balance. I usually have to wash the cloths twice before they come clean and I have to unload washer and re-load it to get it to possibly spin without going off balance again. It will twist the quilts and fold them under themselves and tear them from the pressure. I have called after 6 months of owning this product and explained to the Lowe’s employee and they said it cannot be returned unless it was broken mechanically. This is the worst piece of crap I have ever own. The last Whirlpool product lasted 12 to 20 years. I hated this thing after the first few washings. I generally have to stop the washer and let it soak and then turn it back on if I want the damn thing to get the dirt out. I am using the required detergent as well. I will never own another top load machine like this. I am trying to unload it. Now, I have to buy another washer because I might as well take the clothes out and beat them on a rock at a creek with this thing.

I purchased a small dorm size fridge from Target after our electric went off and was gonna be off for a while and we purchased this to run with a generator and its 110 power also but this is a super little fridge and I would definitely would buy again.

Ive had my Whirlpool Refrigerator for 2 years. Within that 2 year period, all 3 of the drawers within the refrigerator have broken and now there is a crack in the freezer on the bottom starting in the front and going straight back on the bottom to the back and up the back. After pleading my case for a new fridge to their Customer Satisfaction Department and everyones supervisor therein, theyve offered to pay for the epoxy repair. Im very dissatisfied with this! I dont think that a $1300 fridge should be held together by glue after only 2 years. Ive been waiting for one of the drawers to be replaced for over 2 months. They claim that the crisper pan is out-of-stock and they have no information if it is in production. Im to call back in 2 weeks to find out the status of that part. I would like to add that my husband and I work 6 days a week and our adult children are rarely here, so this refrigerator is very lightly used. We dont have a household of 6 or 7 people constantly home, opening the doors and sliding out the drawers. The fridge that I had previously was a GE and it lasted 30 years. I guess the next one will probably be a GE. I just wanted something different. Well I got it. Its something broken.

Near 3 years ago we purchased this side by side going by how good Whirlpool products are supposed to be. Recently the bottom freezer started frosting up and not clearing. Tried all suggestions in the manual. Could not find any information online. The manual was useless. I went online to Whirlpool support 3 different times asking for help. Never got a reply. The racket it made was driving us crazy. It short cycled since it was frosting up. Set up an appointment online. They got that correct and responded quickly. Go figure. The tech came was very nice & professional. No warranty. Find out they only provide a one year warranty. That is absolutely nuts. A refrigerator should last 15 years with no major problems. Should not have needed a $500.00 extended warranty for a $1,300.00 refrigerator. Turned out 2 components needed replacing. Cost just over $400.00. Now were worried it is going to fail again in who knows how long. Whirlpool used to be a respected brand. Never again will we buy a Whirlpool product. 1 year warranty show you they know how cheap they are building their products.

We built a new house less than 2 years ago that included maple hardwood floors and upgraded Whirlpool appliances. The ice maker jams frequently, fresh vegetables freeze despite raising the temperature to 45 degrees and 2 service calls that didnt fix this. The latest problem is the worst. Ice built up in the bottom of the refrigerator and leaked out destroying our solid maple flooring. They are coming out again to service the problem, but who is going to pay for our swollen cupped floors?

Because the lid was not thoroughly covered, painted and sealed, it began to rust within first year. When I contacted Whirlpool about this - they were not only rude, but will not support quality issues with their products. They basically said they did not care and even acted like a consumer should expect such things! Actually said because its subjected to high moisture levels. WRONG, I do NOT just expect rust. It only formed due to poor quality paint job and was not cured correctly. My Kenmore washer and dryer both, were 25 years old and had zero rust and still functioned when I replaced them with these Whirlpool. Its frustrating that there are no quality, American made products anymore.

I have had my whirlpool oven for approximately 6 years. This will be the 3rd time I have had to replace the thermal fuse. For the last three times I have used the auto clean, it blows out the fuse. It has cost me $110.00 each time I called my appliance tech to replace the fuse.

Bought this dishwasher (Model No WDF530PAYB3) in 2013. First the plastic latch for the dishwasher detergent door broke. Then, the paint on the face of the door started to bubble, peel, and now is rusting. Next, the heating element broke. Lastly, it started leaked on my wood floor causing damage. 2013-2014 I bought that Dishwasher, Micro-Hood, Stove, Refrigerator, Washer, and Dryer all Whirlpool. All the kitchen appliances were Whirlpool Gold. They would not fix their product. Offered a discount on a new one as if I will ever buy Whirlpool again.

Beware to those who are in the market for a new washing machine. I am reviewing the product not the retailer. The lack of the agitator on the machine has left the consumer very agitated! I have called Whirlpool in the first year at least three times for them to come look at it and see the pictures of the clothes. It rips but the response basically is, “It cant be helped maam.” Here is what it does: When you do a load of shirts the sleeves tangle so much your clothes rip You can do approximately 3- towels or it won’t spin correctly. A load takes forever! Now I have been doing laundry for over 40 years so I know how to do a load and I have never been so disappointed in a product I could not return, why you ask because they say there is nothing wrong with the machine. Dont do it! So Whirlpool get a 0 star rating from me but I have to give it one for this review to move forward.

I called Whirlpool’s 800 customer service line to let them know I was having a problem with this loud humming and rattling noise coming from my refrigerator because of a manufacturing defect (according to the service tech that came to my house to fix it). Apparently, the metal grid is being held by a flat mental hook which vibrates. What a loud noise. We cannot eat in our kitchen: the noise it terrible. The repairmans solution was to put a piece of rubber between the two metal pieces. It worked until he left. I told him it would start again and it did! I even let the customer service rep hear the noise and she agreed. I am in the early stages of my problem, but from what I have read I am not very hopeful. I would like to have the names and phone numbers of the people at Whirlpool who refused to help. Maybe if we would all band together and call them, they would get tired of hearing from unhappy customers and fix the problems. I am game. Anyone else?

The microwave keypad is worn down after 10 uses making it difficult to read the pad. I just discovered the microwave was missing the front leg and they do not have a replacement part so I am stuck with a virtually new microwave that will not balance. It took 4 phone calls to their customer service department to try and sort out the problem. Poor product and extremely weak customer service department.

I purchase December 2019, I had my previous stove for 20 years and wanted a new fresh look. I purchased the stove during a Black Friday sale. Started having problems with the door not closing. Customer service hold time took days and hours of hold time. Took 3 weeks to repair. Now seeing and hearing sparking and its week before Thanksgiving NO STOVE AT ALL. DONT BUY!!!! What happens when warranty is over????

Whirlpool Cabrio Washer - Owned this appliance for a couple of years and we are constantly receiving UL and F 51 codes on display. Washer stops spin mode after washer shakes violently.

I purchased a Model WRF989SDAB01 Whirlpool refrigerator with the French doors and had it delivered in March 2014. The evaporator developed a refrigerant leak in May 2015. Whirlpool said it was not their problem since it was over a year since I bought it. The technician said this is a problem with this model. I am having it repaired under the extended warranty that I bought. One of my concerns is that the unit has two evaporators so the other one will probably start leaking any time. What a piece of junk. Dont buy Whirlpool. Their quality and service stinks!

Amazing pice. Would recommend to anyone. The heat is great. The oven is amazing. I got this for my birthday and my kids were helping me to get it and I was so excited to receive it I was crying. Amazing machine, wish I had two. Would definitely buy again. I especially love how clean the oven top looks and how the knobs for the burners are easy to use.

This is the worst product (Whirlpool Cabrio Washer) I have ever purchased. I paid $999 for it new. I had to have it repaired at the cost of $500 at just two years old. My sister bought and had the exact same repair needed. I used to trust Whirlpool but not anymore. I wont buy Maytag either since it is a Whirlpool product as well.

Whirlpool Cabrio Washer WTW7340XW sounds like a small jet during spin cycle. The Whirlpool Cabrio Washers have a very well known and well documented problem with the tub bearings failing. Many many disgruntled owners have posted their complaints online, and there are many videos showing the issue on youtube. This issue is so prevalent that the manufacturer has created a tub bearing failure repair kit for $350. The repair is so expensive and labor intensive that many of the certified Whirlpool repair shops no longer work on the Cabrio washer stating that a better washer can be purchased for the cost of this repair.That said, the manufacturers customer service group denies that the Cabrio tub bearing failures is a common problem and are quick to state that Whirlpool holds no liability for this problem. Ramping the complaint up to a customer service supervisor is met with the same canned response. Regardless of the thousands of complaints Whirlpool is claiming that it is normal wear and tear for the tub bearings to fail. The manufacturer should recall the units for this manufacturing defect in the Cabrio design.

I bought the Whirlpool Cabrio top loader set in 2006. Honeymoon was over after the first year and I had to change the dryer element then the washer with the F51 code six months later. Last year, I had to replace the heating element again! For the last six months, I have been dealing with the dreaded UL on the washer. I cant afford to pay a technician $100 to come out and tell me whats wrong let alone what they will charge to repair a problem that, from the looks of this message board, will never be fixed. I have no choice but to get it fixed in order to sell the ** machine. I paid $1400 for this brand new set and have already invested $500 in repairs. How is this possible? I had a 20-year-old machine prior to this and never had an issue. There are lemon laws for cars, why arent there any for appliances over a certain amount? How in this day and age can a company be allowed to sell such garbage? I will never, ever buy another Whirlpool appliance as long as I live. Any other brand can have my money any day.

Whirlpool refrigerator model GX5F-IDXVB07; S/N K23918029; 24.8 cu ft purchased for almost $2,000 on 1/7/2014. Before it was four months old I had spoken with store about it frosting up the freezer drawer several times. Finally found it wasnt level and drawer was hanging. Ok figured it was ok, even though I had other issues with it. I took the cosmetic issue of false height on door, which made it seem larger and drastically size reduced produce drawers which made it necessary it actually cut off celery two inches to fit in drawer and door nooks being so narrow that they only fit 3 small condiments in them on the left door and its a trick to fit thing in the right, but since they are deeper can fit a little more. Ok thats my fault for not actually measuring. But who takes condiment jars shopping?The killer is that a leak in the ice maker, lets water/ice to build up under the ice maker on floor of freezer drawer. It then freezes there and if we dont take out the drawer and remove the ice chunks by hand it thaws and runs out in the floor about once a week. The leak began to be worse in August 2014. I understand it will need repair. What makes me really upset is the refrigerator is supposedly a very good brand and I have had so many issues with it that I curse it regularly. A two thousand dollar fridge with this many issues and I am stuck with it. I guess I should have contacted company before warranty went out, but we would get it past a problem for a while, then it would come back. I am just sick that I ever bought it in the first place! I hate it and will never buy or advise anyone else to buy from Whirlpool again. Quality is awful. Looks good on surface, stinks for quality.

If you are in the market for a new washing machine, steer clear of the Whirlpool Cabrio (or any Whirlpool for that matter). We have had issues with ours from the beginning. We had Whirlpool techs come out and were continually unable to fix the issues. Eventually they told them that it was not broken, even though one tech told us it definitely was. After four service calls they just stopped sending out techs and told us too bad. Now after less than two years it is leaking from the bottom. Yeah, Whirlpool, theres no problem with it. Save yourself the potential headache and get something else. Anything else.

I purchased a Whirlpool duet set on sale at Lowes about two years ago. The front loading washer has been leaking when I put in a full load of clothes. It usually floods the floor when it leaks. I am upset and very angry because this leak has ruined the doors to my washer doors. Apparently, the defects with this machine was known by Lowes and the Whirlpool company at the time that I purchased it (thus the sale price). This was not forementioned at the time of purchase. What a lousy way to do business. Whirlpool screwed me. Shame on me. Never again.

Whirlpool Cabrio 4.3-cu ft High-Efficiency Top-Load Washer - I wanted to buy American. My Sears front loader (I had for 13 years) died and I couldnt get someone from Sears here to fix it. So I bought this Whirlpool from Lowes 4/20/15. I want to be able to wash sheets, towels, clothing and sometimes a blanket or a sleeping bag. I re-use my washer water for the garden and use no chemicals or fragrance in my washer soap. When I bought this, my washer had died. I was kinda desperate to buy a new washer. I went to Best Buy and Home Depot. There were ads all over Lowes advertising: Same Day Free Delivery + Installation. While there was no one in the Appliance department, I went to track someone down so I could pay and get out of there. I was told that it would take 10 days to get any of the washers I was interested. I didnt have 10 days, so I called my appliance repairman and he came to get the washer and install it. The deal breaker is that this machine vibrates the clothes clean - not water, so the fabrics are trashed and the sheets get all tied up. I had the factory repairman come and he told me you cant do comforters, more than a sheet or towels in this washer because its energy efficient! I should take my towels and sheets to a commercial place!! I called Whirlpool and wanted to exchange for another and they were not at all agreeable. No one else complains. Even after I looked on the internet for reviews on this machine 250 out of 350 had the same complaints as I did. I cant even donate this to a homeless or animal shelter if they dont suggest you wash sheets and towels in it!!! This rule was nowhere in the literature and the info on the top door doesnt say that either! Imagine my dissatisfaction!!! What homeowner doesnt wash towels and sheets???

Purchased the American Made Whirlpool in Oct. 2020. There is plenty of room and there are only 2 adults in the home. It is a basic no frills refrigerator. We do not even need the ice maker that it has. Would purchase this again. The only negative is it makes weird gurgling sounds on occasion.

I bought this piece of junk Whirlpool Cabrio washer two years ago and it’s been nothing but junk. Just like everyone else, this thing has never gotten my clothes clean no matter what I do. Anything with a drawstring or straps gets ripped up or stretched out. It’s loud and shakes, even though it’s leveled. Now, to top it off, it’s leaking water from the basket seal. I called Whirlpool and they couldnt give a damn. Since it’s out of warranty, it’s my problem, even though she said they know this machine has a lot of problems. So now Im stuck either fixing this thing or buying a new washer. Every appliance in my house is a Whirlpool and Ive had nothing but problems with several of them. I thought when I bought the brand it was a good brand and they stood behind their stuff. Boy, was I wrong! I will never buy Whirlpool again! They should recall this washer!

The bottom of the drawer collects water and freezes and then overflows onto the floor. There is no drain pan under the refrigerator. Then the freezer collects frost over the food, and walls of the freezer. I have to unplug the refrigerator and let it thaw and then plug it back in. This process is repeated every week. I have had it less than 2 years!

Purchased 2 years ago from Lowes with the matching dryer. This machine (Model #WTW8540BW0) has more problems than the Bosch front load that I replaced. All of my white clothing gets small rust colored lines on it. I am sure this is because the top of the bleach dispenser is lined with rust. I have never owned a washer that rusts (screws are also rusty). I will NEVER purchase another Whirlpool product.

I purchased the French Door refrigerator only 7 months ago. It has been emitting a low pitched, loud, vibrating hum for days. I called the company and spoke with a well-trained representative who informed me that there needs to be a service call. When I mentioned that this did not indicate an acceptable situation for future dependability, I was pitched to purchase an extended warranty. Further… this company doesnt monitor Consumer Affairs. Quality and standing by a product are manufacturer qualities that were not evident during the call.

If I could give no stars I would. I own the Whirlpool Cabrio, which I bought only 2 years ago. Im on my 3rd service call. They replaced my board after only 1 year of owning it and now 2years later its the same error message (F6E2), the board again. Besides this problem the machine is horrible! Every load has to be done on the deep water mode or else your clothes will come out with dry areas. Forget about darks - they come out with lint and soap residue all over them. So for darks you have to use extra rinse cycle but still the clothes come out with lint all over them. Laundry has turned into a nightmare for me. And the clothes arent clean. If I dont spray and scrub any stains, the clothes come out with the stain still on them. Dirty white socks come out dirty, even with bleachI dont use warm water on my clothes because it shrinks them and I dont put all of my clothes in the dryer because it shrinks them. So I am constantly using lint rolls, like crazy on all my darks. And even though the machine is very large I was told to never put a lot of laundry in it because nothing will get clean. So now I have to do more loads of wash. Doing laundry has turned into a job, a horrible job that takes hours. So now I have to use deep water, extra rinse and smaller loads so how is this energy efficient - its NOT, its the opposite of efficient. I am doing more wash and using more water. I use liquid HE detergent like they said. I clean my washer when it lights up to clean it. I dont know what else to do. I just called whirlpool about all of this and my second board being broke within 2 yrs and they dont stand by their products. I have to just keep getting it fixed through my extended warranty company. Thank goodness I bought an extended warranty.I would never ever buy anything whirlpool again! Dont buy this washer if its still available, it is the worst. Even if cabrio isnt available (which I dont see on their site) I still wouldnt buy whirlpool. They should replace my machine with a different one at this point. Not that I want another whirlpool but at least I would have a machine that works. This machine completely stopped working after the error code so I have no machine for 4 days now. I waiting for my extended warranty to get back to me and then I have to make an appointment for the appliance company to come and fix it. This is crazy. All these days and I cant do laundry. This is not acceptable!

We bought a new stove from Lowes in 2015 which is a Whirlpool with an AquaLift self-cleaning function. This function is totally useless. We have tried it several times and it does not remove the grime from the oven. We did not even have a very dirty oven. It doesnt clean the sides at all and the bottom is still dirty. I complained to the store and they told me the AquaLift function should be used every time the oven has been used. They recommend that I use a spray for the oven (which is porcelain) and scrub off the dirt. Give me back my old self-cleaning oven with the high heat. This new technology doesnt work.

This is the worst washer Ive ever owned. It consistently gets off balance, doesnt clean the clothes, and is a perfect example of poor design. I have owned the washer for approximately 9 months, and hate it. Im getting rid of it as soon as possible.