I am somewhat satisfied with my induction range. We ordered it just before Thanksgiving from Lowe’s a year and a half ago. We were told that we would have it before Christmas, which was fine with me. I don’t cook for Thanksgiving. Just a lot of Christmas baking. It turned out that Whirlpool had not started making our range until January and it wasn’t delivered until mid-January. It had been really good until about a month ago, when it blew the circuit breaker. My husband was cooking dinner while I was at work and it just blew the circuit breaker. No power surge in the rest of the house. No other circuit breakers affected. When the power was turned back on, two burners were out. As it turns out, the main circuit board is dead. So now the one large burner, a small burner and the ovens don’t work. There are two circuit boards for each oven. When it is working, it is a great stove. However when it doesn’t work, it is costly and takes a while to get repaired.

This aqua clean is garbage. Had Whirlpool with heat clean perfect. Now have to clean my oven with self cleaning over easy off. I am so disappointed. I always thought of Whirlpool as a good choice. And have bought Whirlpool before. But not after this. Bad, real bad.

My new Tridel Condo came with a brand new Whirlpool washer and dryer and the washer has not been working well since the beginning. After several service calls the repairman finally gave up and now were getting a new replacement. However its been a nightmare working with them trying to get this washer replaced. The Whirlpool delivery team and the service team cant seem to coordinate a time together for the replacement. We had to make a first appointment for the service guy to uninstall the old unit, the second appt for the delivery guy to drop off the new unit and pick up the old and a 3rd appt to install the new unit. Each appt has a 4 hour wait window. This is their standard procedure, which is totally inconvenient to customers. To make matter worse, the delivery guy came too early for a condo delivery (before 9 AM) and told us he will be back the next day. And he didnt show up. It looks like now we actually have to have 5 appts (including the 2 missed appts by their delivery guy) to have the washer replaced. All the time I wasted waiting for this delivery is worth more than the washer itself. What would be 4 hours X 5 appts = 20 hours. This is the worst customer experience ever. After 3 months of constantly calling Whirlpool and still no washer. Whirlpool needs to hire some competent people who actually care about servicing their customers.

l will never buy Whirlpool appliances again, nor do I recommend to anyone. My wall over was 1 1/2 yrs old with a worthless 1 yr limited Warranty. I had Total Appliance from Cleveland do the repair, the only ones I found at the time that would work on this type over with a Digital panel. I think the engineers think we all live in Silicon Valley. Unfortunately the cost to repair after I cleaned the oven for the first time was $384.00 to unlock the door and 2 trips and he had to remove the door to replace 2 fuses so the door and panel would work! Im afraid to clean them oven again..I called Whirlpool and the first wait time was 70 Mins... I put the phone on speaker, finally I talked to 2 Customer Service men to no avail. He basically said my Warranty was up and nothing they could do! I said I was going to complain on Social Media and he didnt care! Go to Consumers Digest before you buy any new appliance! PS, I also went on YOUTUBE and you can see all the TROUBLESHOOTING ON MANY APPLIANCES!

I agree with the person who said they would rate it no stars, because this washing machine model (Whirlpool Cabrio Model No. WTW8500DC4) does not deserve one. It truly does need to go back to the engineering department. This washing machine is a replacement for another Cabrio! Short story on the first one: Installed on February 2, 2017. October 5, 2017, machine would not go. Then began a series of waiting for repair people, parts, etc. I think it was a total of four trips -- the first one to inspect, three to install parts, the last one being where the repairman took the machine totally apart in the laundry room and was here for several hours. Still would not work. On November 29, 2017 (almost two months later!), Whirlpool had one delivered by JB Hunt. Well, that wasnt so short.This complaint is on the replacement machine. Installed on November 29, 2017. On February 3, 2017, washer said it was done. Well, it wasnt! Clothes were sopping wet, had not been spun, and the fabric softener had not released meaning, I guess, that they had not been through the rinse cycle. It gets better! Tried to start it on a short wash, meaning not very dirty as that is the only way to shorten the cycle. The timer showed 40-something minutes, then went to 1:36 minutes, then to 1:42. Turned it off, unplugged, let sit 15-20 minutes. Plugged in, started it back up. It went crazy! Water was pouring in the machine, then I heard a noise, looked to see what it was -- it was water coming out the bottom of the machine. Husband turned off the water spigots, didnt stop the water. I unplugged the thing from the wall; water did stop.Water was in the laundry room, the pantry, the kitchen! Thankfully I was standing there to see what it was doing or it could have been really bad. This time I took photos and video of this thing. Technician is coming Wednesday. Well see, wont we? Do not want another Cabrio, but what do you do if, like most people with new washer/dryers, you want a matched set?

Agreeing with many. How disturbing to buy a Cabrio Whirlpool washing machine about 5 years ago. I might as well go down to the river and wash my clothes. The bearings went out which means I have to be the spin cycle. I am hanging out my clothes on the line - very wet - until my husband buys the part and fixes it himself. I had my maytag for 25 years. An awesome, dependable machine that we laid to rest because of rust. We should have gotten another drum instead of buying this machine. Where are the engineers that are making dependable appliances to last a LONG time? We have not gotten smarter. Or we only care about the all mighty dollar. Make something to last a short time so that you have to buy again. We will do some extensive research the next time we buy a washing machine. Do not buy this machine!

Purchased this machine in Jan 2012. From the start, dark clothes came out with white streaks on them. Thought I was doing something wrong - kept using machine. Then started noticing my whites coming out looking very dingy, light tan stains on them. Called Whirlpool and was told to use Affresh tablets to CLEAN my washer - why should you have to clean a washing machine?Several weeks ago noticed machine getting very loud during spin cycles - and I mean loud! Sounds like a jet engine taking off in my basement. Called repairman - he listened to my machine and said noise is the bearings, seal not fitting properly around bearings and the grease for bearings is slowly leaking out into my wash cycles. Explains the dingy whites and spots on darks. Said he just worked on a Cabrio with same issue - had to rebuild seal and bearings - about a $450 job. After reading all these reviews, decided not to attempt to fix this machine. Going to scrap it and start over. $900 for 3 yrs of an inadequate washing machine!! Whirlpool should be made accountable for this inadequate product to all of us consumers who threw away hard-earned money. Reading up on the Speed Queen agitator model. Lots of good reviews. Think I will go back to the old tried and true way of washing clothes.

We have the Cabrio model and are thoroughly pleased with the performance. My only issue is the amount of sounds during the spin cycle. Otherwise, the machine is quiet. I like having the automatic dispensers for soap, bleach and fabric softener. Not having the classic tub makes loading a little different as the clothes need to be distributed around the side of the tub and avoid the center.

I have use Whirlpool washers and dryer for years. I had Washer and dryer that lasted me 20 years, even when I thought they were going out I had purchased another set maybe two years before and they were still running so I left them in the house I sold, I would recommend Whirlpool to my friends and family.

We bought a Whirlpool gas range about a year and half ago. The oven started giving lighting problems we had to light with a match every once in a while. Then the broiler igniter started giving same problems so I replaced the igniter, still did not work. Then I tried the control panel, still nothing. The igniters were about 45.00 each. The control panel was 250.00. Then I replaced the spark module and it is now working. Some models the spark module dont control oven and broiler but mine does. That was 200.00. The best thing was the part place I was ordering from would exchange the parts that you try and they also can answer questions either online or by phone, Appliancepartspros.com. My oven model # is wfg371lvs3.

Our son-in-law bought us this Range. Before it was even a few months old the oven handle melted off, we called Whirlpool they sent a repairman to fix it. Now it is three years old, the same exact problem with the broiler handle. There should be a recall on this part, why in the world would a manufacturer use plastic for handles to begin with. Yes I can replace the part myself for $37.57 plus all other added fees but its not right nor fair when its a faulty part to begin with. My one and only new stove is actually a pain.

Bought the Whirlpool Cabrio washer (WTW7300DW) and dryer (WED7300DW1) about 8 months ago. The washer always leaves white debris on the dark clothes - looks like detergent. Except I use blue liquid detergent. It seems like the inside, bottom of the drum is deteriorating and sticking to the clothes, since there is nothing that is white in the washer. I have run it through the clean cycle several times with the recommended washer cleaning product (the brand that came as a sample with the washer). That did not help. Also, we have a dog, our old washer used to rinse out a lot of dog hair from the bottom of our socks, etc. My filter for my drain hose would always have dog hair in it. With this washer, there is no dog hair being rinsed out at all. Lint and dog hair is all through the clothes after the cycle is over. Makes me wonder where the dirt is going, then.The clothes are so twisted after washing. Anything with long sleeves get tied up around other clothes. This seems very rough to wash clothes this way. Also, if you dont use the deep water setting, its likely not to get parts of the clothes even wet. I had a gray hooded sweatshirt go through a whole wash cycle and there were spots all over it that never even got wet at all. The dryer power button is very temperamental. Sometimes I have to hit it 6 - 7 times, at different angles, until I hit it just right to get it to turn on. Other times it just turns right on. There are just 2 of us so I only do 10 - 12 loads of clothes a month. After reading all the awful reviews, I fear that these problems, which are becoming evident now, will only get worse. Yet I only have 4 more months until the warranty runs out.

My son bought a Mastermind 250-L refrigerator on 09.09.2009 (invoice no. **) from the Good Morning store in Alleppey (phone no. 0477-23253809). The cooling effect was lost with a loud sound. I requested customer care. Three times, four people came and they gave a receipt of RS 890. After they left, it is in the same condition. I requested so many times, but there’s no reaction. Before I could go for legal proceedings, I would like to make you aware of the conditions prevailing in Kerala in sales and services. The young trainees who dont know to repair have broken down the entire system and it is fully collapsed. The franchise office washed their hands. This will spoil the entire name and fame of the company. Kindly look in to the matter and do the needful immediately.

I purchased a Whirlpool hot water heater 2010 and it started having problems 2014. I called customer service. They informed me my 6 year warranty was only for parts and I had to pay for a certified repairman to come and do diagnostic tests and they will pay for parts only. I said the repairman is half the price as the hot water heater and then he has to come install it. Woman on the phone was just as ready to get off the phone as I was! Save yourself and just buy a new one NOT WHIRLPOOL!!!!!!

We purchased a new Whirlpool Cabrio washer, model #WTW6340WW0, and dryer unit 2 1/2 years ago. We did our research online; Consumer Reports got great reviews everywhere. We went to Lowes and was told that this set (washer/dryer) was the top of the line in top load washers, so we purchased it. Now 2 1/2 years later, our washer is out of service, bad power board is the suspect and maybe the pump. I have heard that there may be a class action lawsuit coming down the pipe against Whirlpool and would like to know more info if it is. We paid nearly $1,000.00 for the washer and like other complaints, we were led to believe that we would get 10-14 years service out of the unit. But that did not happen. I think Whirlpool, Consumer Reports and Lowes should all be held accountable for misrepresentation. I can assure you that all of their executives received attractive bonuses for misleading the consumer. I would not recommend Whirlpool to anyone, Consumer Reports nor Lowes.

My new Whirlpool Stove, has two grill like tops, heavy duty and awesome looking. It has a special burner to keep food warm, a stainless steel front and bottom drawer for broiler storage. Broiler is also on top in oven, broiler flame.

We purchased all our appliances from Flecks - there were to be rebates. Also never received them. We have had our oven for 2 years - when I set the oven on 350 it will go up to 400 degrees & the temperature on the front of the stove is 350 then it will drop down to as low as 250 & the temperature will still say its still 350. I called the company - did will do nothing. Will cost me as much to fix it as to get a new one. This a Whirlpool oven.

I purchased this Whirlpool Cabrio washer three months ago from hhgregg. If I hit the lottery, the first thing Im going to do is take it to the dump and buy a new washer. There is no way to wash a load of towels in this machine. I started a load at 7:35 this morning and it is now 9:53 and Im still dealing with the drain and spin cycles. Over and over, I try to get it to spin out enough water that I can put the towels in the dryer. I should have suspected something when I saw that the washer even had a separate drain and spin cycle. It should have told me something. Its a piece of junk. Never again. Im back to Kenmore.

We purchased the Whirlpool refrigerator on July 9, 2012. Refrigerator was replaced on August 23, 2012. Since then there have been many, many service calls. I wish I had kept records to be able to tell you exactly how many times, but we purchased an extended warranty. From memory, I can tell you the ice maker has been replaced twice, new doors have been installed for refrigerator and freezer (replacing ice maker a third time), then within the last three months the freezer door was again replaced (replacing ice maker a fourth time). The gasket on the freezer door has been replaced. At one point the refrigerator was colder and freezing and the freezer was not freezing. Parts and pieces have been repaired on several occasions. The inside of the freezer door next to the ice maker is still frosting up and yet again the ice maker is not functioning and needs to be replaced a fifth time. In other words this Whirlpool refrigerator has been a lemon for us. Finally, we figured it out. There is a fairly large gap at the top of the freezer door between the case and the gasket. If you run your hand across the area where the gap is, there is definitely a dip in the face of the refrigerator case where you can see the top of the ice maker. A picture showing the gap is attached. I am not sure that our purchasing a store extended warranty was fortunate or not. My husband has insisted on repairing this thing over and over and over because of the extended warranty. I think repairing it is futile and the only people being punished by all the repair calls is us because we frequently do not have ice, we are losing food because of freezing or not freezing or cooling or not cooling as the case may be. Thank God, the warranty expires in July and we can repair this Whirlpool by replacing it with another brand -- not in any way associated with Whirlpool. If you Google Whirlpool, you will find that Whirlpool is affiliated with almost every other brand of refrigerator and really limits your choices. Based on my experience with this Whirlpool refrigerator, I will never purchase another Whirlpool or any other brand associated with the Whirlpool brand. The myriad of repair persons in my home probably find a Whirlpool refrigerator is job security for them.

I bought this dishwasher in Nov. 2018 to replace one that was barely working. I have enjoyed using it much more than my old one. Its very quiet and does a great job of cleaning dishes, pans and silverware. The only problem we had was installing it. The leveling screws do not hold their height adjustment when the dishwasher is pushed across the floor during installation because the leveling screw pad was changed from steel to plastic and the tapped hole for the leveling screw is too loose. The effect of this - whereas the steel pad would slide the plastic pad will grab, turn and move the leveling screw out of adjustment. Especially if its tapped hole is too loose. So we went to Home Depot and bought 4 5/16 nuts and used them as lock nuts on the 4 leveling screws. This cost 50 cents. Once we installed it everything worked perfectly. It does take longer to complete a cycle than my old one - 3 hours vs. 2 but it uses less water and does a great job of cleaning. You must use a drying agent with your dish soap or it wont get dry enough. Also, if you use the short 1 hour wash it wont have as much time to dry and some dishes wont be completely dry. I usually wait to do a full wash with the normal cycle - 3 hour.

Whirlpool freezerless refrigerator quit after 17 months. Bought it brand new. APPLIANCE INFORMATION. Merchandise REFRIGERATOR. Brand Name WHIRLPOOL. Model Number WRR56X18FW02. Serial Number U90502841. Highly disappointed!

Purchased heavy duty dual steam washer and dryer in 2008. Recently got some error codes that we could not fix. Had one service company come in and they could not figure it out. Had a certified Whirlpool company come in and they could not figure it out. They called Whirlpool technicians and they were even unsure of what is wrong. Said they could keep ordering parts and trying them to fix the problem. And of course I would be responsible for the parts. And no guarantee it would be solve the problem. Called Whirlpool direct, to no satisfaction. They said they could send the same company out and have them call the tech line while on site and try to troubleshoot the problem. However, would have to wait another 3 days to get him out. Been a week without washer. I have had washers bought previously last over 10 years without any problems. If these machines are breaking or control boards are going out after about 4 years, then Whirlpool has a bigger problem. Whirlpool supervisor was only offering to maybe a discount on the parts needed, without even knowing if they could fix the problem. Seems to me like they really dont care. Very dissatisfied, will definitely not recommend this product to anyone. And if it ever gets fixed, I am going to sell them immediately.

I bought the new Whirlpool aqua clean last year - they guaranteed me at the store it would clean as I explained having a clean oven at all times was extremely important to me. They assured me I would be pleased with the results. I have never disliked an oven as much as I do this one. The tech came to the house and checked the temperature of the oven as I also complained it was baking uneven (the back was overcooked while the front was underbaked) but the temperature was right on so nothing can be done. As far as the cleaning goes all I can get is a new bottom pan for the oven as I have four years of insurance. Not happy as I would like to have a different stove. I WOULD NEVER RECOMMEND THIS OVEN TO ANYONE.

My Cabrio was built in April 2016, its now Feb 2019, and its not working. Shows error code of LF, the inlet water value is bad. I bought a Sears protection plan, repairman comes out, tells me no-one has the part anywhere, its backordered and no way to know when it will deliver. Sounds like a scam so Sears doesnt have to fix it and Whirlpool makes little to none of the part so you have to buy a new machine. This machine also takes forever to wash clothes, sometimes part of the clothes come out dry because not enough water. Its a huge tub, but of no use because theres not enough water to clean properly therefore, you have to do small loads. I always put it on high water because the other features like, quick wash & normal do not give but only little streams of water! The first one I had delivered made a funny noise from day one so Sears replaced it the next day. This one has NOT even lasted 3 yrs. There needs to be new legislation placed upon these companies with regards to the products they make. It should be illegal to make such junk and be able to charge high dollar for it and it doesnt operate well or last very long. They are laughing all the way to the bank on everyones dollar, intentionally making products that last less than a few years! I Will NOT purchase Whirlpool or any of their products again! They owe me a new Cabrio and Im going to make sure I get it and get my moneys worth! DONT WASTE YOUR HARD EARNED MONEY ON THIS JUNKER! DONT BE FOOLED BY ITS PRETTY SLEEK LOOK.

Two months ago, I bought a Whirlpool duet washer and the computer went out, two days after the warranty was up. It went bad that I disconnected the detergent mechanism, which made it work, for now.

Whirlpool Cabrio Model WTW6500WW1 - Have had good luck with previous Whirlpool Washers so thought I would purchase this one 2 years ago from Menards. Paid more than I normally would and thought it would be worth the extra money. Not so.......As many others, it has a foul odor that will not go away and now sounds like a freight train in the house. Called Whirlpool about this issue and parts are not covered. Total cost of parts including the tool that is needed for this repair is $187.00 not including shipping. Whirlpool has lost my business moving forward as like many others, Im sure. Very disappointed!

I purchased a washer/dryer around March of this year. I have nothing but trouble out of both of them. It doesnt matter what cycle the washer is on. Its like it has a mind of its own. It may wash; it may not. Sometimes, it takes over an hour for it to finish washing. The dryer sometimes dries on one cycle; the next time, it wont. Who would think a brand new appliance would do this. Every appliance in my kitchen is Whirlpool. They dont give me any problem, and I use them everyday.

Whirlpool washing machine was not a good buy at all specially after using it and seeing that over the years I had to incur high costs of maintenance. Over the months and years of buying Whirlpool front load washing machine, I had to replace motor twice, digital display twice, motherboard twice THAT TOO at a very high price every time something broke. This time the angle that supports the drum broke and Whirlpool says drum needs to be replaced. HOWEVER, after waiting a month company says DRUM IS UNAVAILABLE. Which means my machine has become absolutely useless just because Whirlpool does not have the spare. Whirlpool has a ridiculous track record with poor service and poor product quality. Manufacturing in one country and selling it in another WITHOUT SPARES is defective and poor service, totally unreliable. Wouldnt recommend Whirlpool to anyone.

Right at 18 months ago, we bought the Whirlpool Cabrio Top Load washer. The last washer we had was the bottom of the barrel Whirlpool model and it lasted 8 years. So, I had no problem purchasing the brand. But now, our washer wont go through the cycles and we hare having lid lock issues. The repair guy said the lid lock was fine which I thought was good news because he said it would be $300 to replace including his service call. Now, it looks like our choice is a $350 motherboard, or a new washer. Whats wrong with this picture? I can go to Lowes right now and buy a used one (exactly the same for $399), pay $350 to repair my two-year-old $750 washer, or buy a different washer? Its hard to believe that a $750 washer is only good for 2 years.

I just contacted Whirlpool Co. by online chat concerning the workmanship of their microwave that is less than two years old. The interior top has begun to bubble and peel as well as rusting. This is the 2nd Whirlpool microwave where I am experiencing bubble and peeling paint as well as rusting. Whirlpool informed that the manufactory was 1 year warranty and to contact a technician at my expense. There is a real health issue here and I hope consumer complaints about this company is being monitored by someone who can help all of those with concerns.

I am 72 years old and this Whirlpool Energy Star HE Washing Machine is just useless. It does not clean clothes properly. It always leaves a stinky washing machine smell which never goes away despite no matter what you do. A completely useless, faulty washing machine! Never ever buy a Whirlpool HE washing machine! Some websites say that you need to buy a washer fan at a cost of $69.99 and attach it to the back of your washing machine as this is the only way you can get rid of the smell. Who has that kind of money? Why is this fan not already included in this washing machine if Whirlpool is aware of the smelly washing machine/smelly clothes problem? This is such a joke! We would like to be reimbursed for our deficient Whirlpool Washing Machine or at the very least, have a recall of this inefficient, poorly designed washing machine. Report them to the Better Business Bureau and anyone else you think can resolve this problem - thanks!! - Unhappy camper

This refrigerator stopped working withing 2 weeks of delivery. Lost a great amount of food. It was a real hassle to get the warranty company out. Took several days. Now there are places on each shelf in the refrigerator where food freezes and I have to throw it out. I am not real happy with this.

I purchased Whirlpool electric hot water tank in May 2011 (model no. EEZ80HD055V). The water tank was working fine for four months. It does not work anymore. I tried to get a hold of Whirlpool customer service. But I couldn’t get a hold of customer service at 877-817-6750. It is motel business without hot water. We could not open the business. We tried the best we could, but there is no contact or support from Lowes or Whirlpool. We have no other choice other than replace the hot water tank. We tried to find the right phone number to explain the situation to Whirlpool customer service rep.

The first day I set foot in IKEA changed my life, innovative and sensible and affordable. Some years later I had the opportunity to remodel a kitchen and I immediately thought of IKEA. I used their online planner, researched the appliances and knew that they were made by Whirlpool and that they offered a kitchen package discount if I bought 3 or more appliances with all the cabinetry. So I hurriedly designed the entire kitchen from top to bottom with IKEA.Included in the design was my center piece, my 5 burner Praktfull Pro Gas/Convection oven range with stainless steel backsplash and top of the line hood fan, basically a thing of beauty! I loved it and I visited the store several times to look at it. I finally bought everything, and installed it. Absolutely the most beautiful kitchen in the world.We have a historic building and were on several historic tours, interviewed for the newspaper, our kitchen was the highlight of the tour. My gas range drew oooos and awwws. The range is an exceptional appliance, beautiful and amazingly efficient, easy to clean…I was in love. Then one day it happened, the love affair was quickly over, devastatingly over. The door fell off the oven and the hinge broke! Yes you heard me right, it fell off, but that is not the worst part. It appears that not only are there no parts to fix it… there IS no fix for it, period. The door fell off because it had been glued on!!! Yes glued on. Whirlpool and IKEA had actually manufactured an appliance that failed in less than 4 years of use and no apparent intention to ever provide service or parts for it. This is criminal and they should be fined for their neglect of the customer, their calculated malfeasance and fraud to the customer.So my beautiful kitchen has a big black angry cavity in it and now I must try to find a new range that will fit in the opening left by this piece of junk and also pay probably over $2,000 to $4,000 for it. Most of all I am heart broken, mad and distrustful of anything IKEA in the future. Oh and by the way, my entire house is IKEA, my living room, my patio, my bedroom (s), my library, my office! Ive spent thousands and thousands of dollars at IKEA. No more! THE FINAL INSULT: Ironically…. my kitchen was featured on the IKEA website!!!

This is a good looking, inexpensive stove/oven. Stove top has four burners. I liked the split grates on the stove top. Its easier to remove and clean. I do not like the rubber seal on the oven door. I am used to the heavier duty seals on most oven doors.

I have an oven that is just under two years old - a Whirlpool. After less than a year, the sensor went out and had to be replaced. After less than one more year, the same thing has happened. They covered the first one, but wont help with labor or parts on this one. There is no user error. Its just a cheaply constructed oven.

This microwave is one of the best Ive ever used. Ive had several brands from generic on up and this one takes the cake. Its very reliable. It works excellent and heats up fast. Ive had no problems with it working to full capacity or any fear of it breaking down. Its pricey but well worth the cost if you want worry-free warming and cooking.

I purchased the 19 cu. ft. Whirlpool Estar refrigerator WRT 3595FYW on 4/28/12. Freezer began showing frost immediately. Repairman from Marcellas Appliance where purchased - (518) 381-1957, came to check it, put a sealer around the door openings of refrigerator and freezer. Frost continued. I called Whirlpool. They sent another repairman from EB Russell in Schenectady, NY, door needs replacing. Door was ordered and when received by them, the door was replaced on my refrigerator.In August 2012, frost is in freezer, on its roof, on the door daily. I called Whirlpool. I told them I wanted to remove it from my home. Whirlpools reply was, you have a repair warranty, not a replacement warranty. I was not advised of this when I purchased. Otherwise, I would have gone to Sears, Lowes, etc. On 8/16/12, another repairman from The Appliance Man, Albany will be here Monday. Its dishonest sale, replacement was advised possible by Marcella, that it was just a matter of course to get an okay from Whirlpool. This is not so. There is no replacement or return policy. Please help. Thank you.

I purchased a (second) Whirlpool washer (WFW87HEDW0) in October 2014. Since purchasing (and to this day), I manually dried the rubber gasket after completing my daily washes, knowing that mold growth was possible. I wash one to two loads of clothes about three to four days per week. During the first year, I did not notice any mold in this area and was confident that the manual drying and cleaning with Affresh was preventing mold growth. However, at the beginning of this year I discovered a little mold growth, which has slowly been increasing, in the inside lower lip of the rubber gasket. The image attached reflects mold in its current state. I was very surprise to see this happening since my diligent cleaning has been thorough and never ending. I even remove the soap dispenser tray to clean and air dry it outside of the washer and leave the washer door open at the end of the daily washes for extra fresh air circulation. This is my first official complaint about a Whirlpool front loader washer, even though I previously owned another (GHW9200LQ0) before this one and had mold growing on the rubber door gasket but, unfortunately, never officially complained about that old machine. Now, I dont qualify for the $500 compensation because I never officially complained three times within the first five years of owning the old washer. To my dismay, I did not immediately realize I had mold growth in the old washer. It was only until years later that a repairman told me that I had mold growth in it. In addition to telling me the price of replacing the rubber part and replacing a broken water pump plus labor would cost as much as buying a new washer. Before purchasing a new washer, I researched and read many reviews about Whirlpool and other brands before deciding on this new Whirlpool. I decided to give Whirlpool another chance and to follow their recommendations on the proper cleaning of the machine. Once again, I am disappointed and angry with Whirlpool and, now, have to figure out what to do with my current situation.

We purchased a Duet from Lowes just a few months ago. Within 2 weeks we had an inoperable machine. After 2 phone calls a service technician came out and looked it over. He had to come back a total of three times to replace the motherboard. That worked for about six weeks and it died again. He came out again and replaced the motherboard again. Fast forward two months and the machine is once again inoperable. When plugged in, it makes an ominous growling sound but nothing else happens. The idiot who designed this thing has no common sense. Its programmed so that it will LOCK on any failure. Not only has every one of these episodes left us with a load of clothes in there getting moldy, you cant even get to the model number or serial numbers; both of which are only visible inside the rim of the machine.So adding insult to injury, your machine is broken, your clothes are in there getting ruined, and YOU CANT EVEN GET TO THE INFORMATION YOU NEED TO SET UP THE SERVICE CALL. If it had only happened once, Id laugh, but this is the third time and its not funny. We bought this machine because it said proudly made in USA. Next time, Ill support the Korean economy and buy a reliable, durable Samsung. The only positive I can offer is that the Whirlpool live chat person was able to set up the service call for me even though I cant get to the relevant data inside the machine. DONT BUY A WHIRLPOOL WASHER. Despite their legacy and US-feel-good associations, the sad truth is that they are poorly engineered and poorly manufactured.

I have a Whirlpool Cabrio washer. It was great for almost year. After that it has been nothing but trouble. The body of the washer has rust coming through the paint and large areas that is so rusted that the paint has chipped off completely. A washer is expected to deal with water and not rust through the body. I have a 10-year old Ford truck without a speck of rust. Dont they undercoat? The circuit board has had to be replaced because of rust. I have to take several Q-tips and go under the cover to remove all the rust if I dont it gets rust stains on my clothes, which is impossible to remove. The customer service is non existent. They have left me on the line for over 40 minutes. I hang on only because it would be another hour or so of my time to get someone to answer. I was without a washer for a month while waiting for parts. Why dont they have parts for their products? I had to slop my way too dirty laundry mats 3 times a week as I do 2 to 3 loads a day.My washer is downstairs and stops and gives me the unbalanced message even when its not, running up and down the stairs several times to complete one load. I also get the F51 message for no perceivable reason. The extra rinse button only works 1/2 the time. This was an expensive washer ($1,000.00) and I feel that I deserve my money back. They are knowingly making an inferior product.

I was pleased with the look and performance on my dishwasher. It did sometimes leave some food particles, but, overall it did a good job. I really dont remember the model since it has been a few years since I had it.

I originally brought this to the attention of Whirlpool on February 27, 2014, and they chose to ignore the matter I raised. I am appalled at their customer service, but then again, customer service has been dead in America for decades now. I purchased a KitchenaAid (Architect Series II, Model KERS807SSS02, Ser. XW4704146) oven in 2009, which included a 5-year extended warranty. The first time I had to use my extended warranty was the first time a pot overboiled and thus overflowed covering the top of my range. Since then, Ive had to have my oven serviced two other times, but resulting from a pot which overflowed on the range.The controls are located in the front, directly below the stove top. There is most definitively a flaw in the design of the model I purchased. It seems quite obvious to me that the design should have included protection from moisture reaching the controls. It is very common for pots to overboil, from time to time, and thus overflow, but this should not cause the controls to malfunction due to seepage. Had I purchased the model that had controls behind the range and controls above the cooking surface, moisture would never reach the controls when a pot overflows. It should not cost hundreds of dollars each time a pot overflows on a range. Had I known that the oven model I purchased had a design flaw that allows moisture to reach the computer controls of the oven, I would have purchased the oven with the controls above the cooking surface.I invested over $2K on this oven because having owned KitchenAid appliances in the past, the KitchenAid brand had historically proven reliable. KitchenAid (or now Whirlpool) can no longer take pride in the quality of their products, most likely relative to the loss of manufacturing jobs in the U.S. Whirlpool ignored me the first time I contacted them on this matter and most recently today when I was told that it was a use matter. Apparently they believe that an overflowed pot is not a common occurrence on a range. I wrote directly to Jeff Fettig, CEO of Whirlpool and he has chosen to ignore me.

This is our second Whirlpool refrigerator that has the same defrost water drainage problem. I was told this newer model had updated technology, not so, actually it is worse. My older refrigerator went about 8 years before I started noticing water on the floor and this newer model is 4 years old and it started having water overflow at 3 1/2 years. Then in April we replaced the water filter and the ice-maker stopped working. My freezer also stinks like stale water (my reason for replacing the old refrigerator plus the water on the floor). I followed a YouTube video for defrosting the drainpipe, it was very tedious, labor intensive, and time consuming and worked for 3 weeks. This is very upsetting. After spending $2500 to have such problems and my expensive $150 4-year extended warranty expired just weeks before the ice-maker went out. This is obviously a design problem that Whirlpool refuses to address since my other model was a year 2000 model and my 2013 has the exact same problem. VERY POOR customer care in addressing these design failures of both the defrost drainage (just make a larger drain port!!!) and the ice-maker.

Love love love my Whirlpool range!!! Regular bake and convection!!! Huge oven, beautiful glass top, and 2 burners that have double surfaces to fit huge pans! It has steam clean feature too!!! Incredible and amazing price!!!

Great washing machine. I have been using for over 2 years and this washing machine has NEVER failed me. Clothes from extreme filth to sensitive material always come out clean, not damage, and smelling great. I would highly recommend Whirlpool washing and drying machines to anyone!!

My mother purchased a Whirlpool gas stove. When the stove arrived the door didnt shut properly. We were told to contact Whirlpool. They sent a repair person out who said that you have to use the stove a few times first and then the door would close. Meanwhile, I had a 2-inch gap and gas and heat escaping. I called and requested another company to come out and check it. No one called back. I called again and they sent out the same repair guy. Apparently hes the only one in the whole Charlotte metro area that can service Whirlpool. Again he said I had to use it more. I called again and requested a different repair person to come out. They promised to send out a lead. When the company called to confirm the appointment they said no one told them that. They finally sent out a different person. That person said absolutely the door was dented. He offered to replace the door. He then came back and said the door comes in too many pieces and he didnt want to put it together so I should contact the store I bought it from and see if they would replace it. Whirlpool refused to repair it. I was able to get the store to replace it after explaining to them the problems with the warranty service. I filed a complaint with the BBB and they lied and said they tried to contact me which never happened. When I called the executive office I was told that I was the problem and that it was resolved so leave them alone. I regret my purchase of my appliances and now have no one to stand by the warranty.

About two months ago the washer starting stopping and the UL light continued to come on during every spin cycle. So I would adjust the clothes and start it again. So I decided that I should call a certified serviceman to come out and access the problem. Today a certified serviceman came out to access the problem. After about twenty minutes I was told the tub needed to be replaced and the cost and labor would be $600 or more. I do realize that the washer is about 8 years old but to completely need a repair like a new tub. I am very upset and have no idea what to do.

Bought a home with a Whirlpool WRF540CWBM01 french door refrigerator circa Oct 2016. The unit stopped freezing/cooling and the appliance guy replaced a relay and this did not help. I called Whirlpool to check on the warranty, only 1 year. Then, I called the extended warranty and they wanted $342 for 1 year and $567 for 3 year but wanted 60 days before this would go into effect. Hmm, wait 2 months w/out a working fridge, great idea. So, after 2 short years the compressor failed and nobody will attempt this job and cost is too high. Had to buy a new GE fridge w/ a 5-year parts/labor covering this type of issue. Whirlpool needs to fix these issues. Very disappointed.

Does everything its supposed to except get the clothes clean! Nothing gets clean, even on bulky setting when theres supposed to be more water in the machine!

We purchased the gas slide in range with gas oven. Immediately the temperature would hold a consistent heat, therefore it continually reset with a start sound (swoosh) every 5 minutes. The manual says it will do this, but clearly this is not normal. Then, the oven stopped working, showing an error message FBE0, that the cooling fan is not at high enough speeds! It sounds as though, along with hundreds of other people, we have all been ripped off! If anyone can please tell me what can be done about these defective stoves, I would appreciate it, thanks very much!

I purchased a 40 gallon water heater at Lowes and installed about 3 years ago. A couple of weeks ago, it got an upper sensor failure code on the gas valve. It would heat by resetting (turning valve off, waiting a minute and then lighting) but after a few minutes, it would fail again. I called the customer service and they mailed out a new upper sensor. When it came a few days later (I paid for shipping), I installed it but the same failure code. Again, the only heat I could get was by resetting the valve several times before a shower. I called customer service again, told them what I did and they said, Oh, the problem is the gas valve then. So they mailed out a new gas valve unit. It then came a few days later and I installed it according to the enclosed directions to the letter. Still got the failure code and still had to keep resetting it to get any warm water before a shower.I called customer service again, told them what I did and he said, Well, did you flush the water heater with apple cider vinegar before you installed the new gas valve? I said, No, it wasnt in the enclosed directions to do so. He said, You should have done that and it would have worked. I will send out a new gas valve. At this point, I blew up. Two weeks with no reliable hot water. I told him I want a new water heater and he refused. I asked to speak to his superior. He said no. Dont ever get a Whirlpool product. Some other crappy company builds these turds.

I have had a Whirlpool hot water tank now for about 7 years and all I have had out of it is trouble. It wasnt even a year old and I was putting a thermocouple in it a few months later I put another one in it. All I do is put thermocouples in it. I have saved the old ones. This heater is a piece of junk and I am the one whos paying the price for it. I just put a thermocouple in it on January 9, 2012 and I am putting another one in it on January 15, 2012. I have replaced all parts and it still does it. They are going to buy me a new one someday. I’m tired of this. This should not be happening. They are ripping people off. If the pilot light does not light, you have to replace the thermocouple in it.

I had my Whirlpool Gold refrigerator for two years. I observed water puddling out of the bottom of the freezer about every three days. I called Whirlpool to find out if there was a recall on my problem. There was none although refrigerator repair companies said there should be as Whirlpool has a defective part. That part is the drain for the freezer as it clogs up and does not allow water to drain and then refreezes. When the freezer automatically defrosts, some ice melts and as a result the water comes out of the bottom and puddles on the floor in front of the refrigerator. I recommend that people do not buy Whirlpool refrigerators unless you are willing to pay over $200 to replace the end of the drain line in about two years.

Bought a Whirlpool refrigerator at Home Depot in 2018. It has been a $3,000 piece of junk!! Customer service is garbage!!! They refuse to address a persistent problem since the day we bought it. Do yourself a favor and buy another brand!!

This machine (Cabrio) is a piece of junk. It does not fill up with enough water to cover the clothes, even on deep wash and your detergent will still be sitting on top at end of wash and clothes are not clean. It was a $900.00 machine. We need to file a class action law suit. Worthless waste of money. Anyone know of any remedies to get a new machine from Whirlpool or of any class action suits?

We purchased a whirlpool gas dryer 30 years ago this past February. Its still going strong with 30 years of continuous use!! The only service ever required was a belt change I did myself 18 years ago. Not too bad whirlpool!!

Four years old and only used by a 2 family home. No kids overloading it. Probably wash 3 loads a week on average. After 4 years, it has started the grease flying out of the bottom and now leaking water. My appliance repair man told me to scrap it and buy a new one. The repair and the parts are too expensive and in the end it is still junk. I realize things wont last 30 years like they used to but can I get 7 years out of a major appliance?

I would like to know if anyone else is having trouble with the broiler unit. The unit quit working. Thankfully I had purchased the extended warranty. The guy came out, cleaned the orifice and called it good. The next day I went to use it, and guess what, it did not work!! So we thought maybe we needed to leave the oven door cracked open a bit... Well, guess what... It melted two of my knobs!! We called, got another guy out here. He checked everything. Even pulled the stove out to check out connections. Then he informs us that you can set the broiler to whatever temp you want. Thats new. So again, we try the broiler.... Guess what... It got to the temp and clicked off. Now I ask, how does one broil a steak if it does that? I did call Whirlpool directly and got nothing. Our model is WFG361LVQ2. So please, if anyone out there knows that this is how it is supposed to be... please let me know.

I just bought a new dishwasher because my 5-year-old one went out, model number DU1145XTPBA. After pulling the old one out, I took the motor out and lo and behold, what did I find but bad bearings. The motor was fine, just the bearings were rusted out and were jamming the motor so that it wouldnt move. The price of a new motor, $149.00. Well thats a bit much for something that only lasts 5 years. I went on eBay and found them for $70 to $170.00. So if you have a problem where your dish wont wash at all but fills up with water, it may be nothing more than cheap bearings in the motor. If I, myself, were this companys CEO i would really consider changing companies that they have making these motors or at least the bearings. Just wanted you to know that this is the only problem I have had with this one and Im going to replace the motor now that I know what it is. Thank you Whirlpool for a day spending repairing and replacing one of your dishwashers. I learned a lot.

I purchased a Whirlpool Microwave GMH6185XVQ1 on 7/2010 for kitchen remodel. It needed a magnetron repair just after one year warranty ran out. I called Whirlpool and they agreed to repair. Whirlpool sent me an offer for an extended contract. I purchased it. Since microwave was out of warranty at time of contract purchase, I was told there would be a 60-day waiting period. Microwave broke again on 3/2012. I waited until extended contract was in effect. I was told since microwave broke before contract was valid, I would have to pay out of pocket to repair, then contract would be valid after that. It appears (per internet research) these microwaves have bad magnetrons that need frequent repair. I wrote to BBB to complain.

I just bought a brand new Sterling steel refrigerator not even 2 months ago, and since I got it, noticed rusty spots coming out,and now has spread all over. I called customer care, and they said it wasnt cover under the guarantee,and to buy a special spray out of my pocket expensive to remove the rust. I am Very disappointed with the service I received, for its not even 2 months old refrigerator and it looks like it is old now. In addition, the company didnt offer to send someone to take a look, checking and make sure theres no future problems with my new purchase, and as a courtesy removing the rust free of charge.

Ive had trouble with my washing machine since the end of May 2011. I have had over 5 service/repair calls which still resulted with the same problem. By the way, I do have a warranty on this product (which hasnt seem to have helped at all). I have never had such poor customer service in my life as I have had from Sears and can assure you, I will never buy another product from Sears or Whirlpool considering the experience I have had. I have missed numerous days at work only to wait for a repair appointment that never happened. Needless to say, I am very disappointed and would not recommend anyone to buy from Sears or Whirlpool.

I was searching online and stumbled across this site. Funny that there were so many complaints about the console on the ovens, considering that my issue was with the console on a dryer I purchased. I have only had the dryer a year, and it stopped working. There is nothing else wrong with it, no codes, no problems with the lights, or anything else. A technician came out and found that it was a small plastic and metal button piece that helps the press here: spot on the dryer panel to connect to the start button on the console. The little arm had broken and the switch no longer worked.Figured we would have to purchase a new button. NOPE, apparently we were told that we had to purchase a new console (over $200 dollars, close to $300 with shipping)???!!! We were also told that wear and tear can cause the issue. Wear and tear?? On a dryer thats maybe run once a week for about a year? Try again, I think I need my boots because it sounds like horse** to me. I think I will pass this information along to people I know that are technicians so that they can let people know not to purchase from this company because they obviously arent going to address the situation. I think I might also utilize social media to let people know so that they dont have to go through this much aggravation. I certainly dont know what we are going to do, since it took me a year to pay that dryer off, I cant afford another dryer at this time. So unfortunately with a new baby on the way, you wont get any sympathy from me if your company takes a character hit.

We bought the dishwasher because ours was not a very good quality, and it was a Whirlpool and was larger than our old one. But the arrangement of the bottom shelf doesnt allow for effective placement of larger items. If you wash any large items it doesnt wash the top shelf dishes.

My experience w/ Whirlpool has been disastrous. Whatever you do read the reviews on products before purchasing, do your homework first before purchasing any major appliance. Whirlpool company and its employees are a joke. We are paying consumers and spent our hard earned dollars to support a company that could care less about us and our problems with their products they sell to us which are a piece of crap. I purchased a refrigerator made by Whirlpool from hhgregg in Oct 2015, which took 2 months to get it delivered. The refrigerator is not a year old yet, and cannot get anyone to come out to repair it. I have called Whirlpool numerous times, and so have my husband to come and repair a refrigerator that is less than a year old.The ice maker stopped working. Then I came home and discovered that the refrigerator is not cool, and everything in the bottom freezer had almost thawed out, and a repairman was supposed to come on August 31, 2016. It has been hot as Hades, during August, Sept, in the high 90s and they had the nerve to call and say they had to order the icemaker and when it came in someone would be out to fix it. I called the company in Maryland to find out what part did they order because a technician hadnt been out at this point to determine what part needed to be replaced. I called Whirlpool, and yes was put on hold for 45 minutes each time, and when I asked to speak to a manager, I was told that the manager said I could call a repairman and they would reimburse me up to $150.00. I replied That that is not my job. Your job is to send a repairman to fix it.The name of the company that they gave me and the phone number is located in Maryland, I live in the state of Virginia past Richmond, 3 hours away. Then I was told by the company in Maryland that they dont have technicians to Repair Whirlpool Refrigerators. This is totally unacceptable. It is Sept 19, and since August no one from Whirlpool has been out to fix it, neither have they tried to rectify the problem. Bottom Line, DO NOT BUY A WHIRLPOOL PRODUCT, not from hhgregg, Sears, Home Depot, Lowes, anywhere because this is how they treat customers. I have an 88 year old Aunt that lives with us that were responsible for, and she cant even get a glass of ice cold water from a brand new refrigerator thats still under warranty. Whats wrong with this picture?

Whirlpool Gold Series Dishwasher Model # WDT710PAYM6 - Purchased this dishwasher in July, 2014. Last week the dishwasher powered off mid cycle. Could not power back up. Tried a few suggestions found online to reset which did not work. I had both a plumber and an electrician look at it. All water lines were fine and power coming in and out of dishwasher and control panel was checked and all looked okay to electrician, but could not get the machine to power up. No longer under warranty. Very dissatisfied there is no recourse.

Purchased the Whirlpool DU915 in 2004. Its been 16 years and I havent made a single repair. A lot of that is just proper use, i.e. scraping off food stuff, using correct soap, etc. I have other newer Whirlpool dishwashers at rental properties which have required repair due to misuse. I would recommend Whirlpool products to friends and family.

3-4 years ago, I had replaced my hot water heater with a Whirlpool, which was purchased at Lowes. On 10/23/11, I awoke to a flooded basement from the said water heater. When I entered the basement, I was able to verify that the water was spraying right from the casing of the unit. Who knows how long it had been spraying, but the place was a complete mess. The water was about 10 inches deep and many things were ruined. I proceeded back to Lowes and purchased another exact unit. This morning I awoke to the sound of what seemed to be water bubbling, only to enter the basement and see exactly what I saw just three weeks previously... another flooded basement from water just pouring out the side of the unit. This is an obvious defect in craftsmanship. Now I find myself with a flooded basement, no hot water, and a decision to make. Do I fight for another replacement or give up on the brand? A replacement water heater will solve my lack of hot water but for now, the question is for how long? Not to mention the cost and time spent with the clean up I did twice.

I purchased my Whirlpool washer on June 28, 2011. Within 4 months, I had to call for a repair. It is now going to be a year and I am on my seventh repair call. The repairs have been everything from loose pulleys, new belts, and new valves. When I called to complain, they said there is nothing they could do and I should take out the extended warranty. I have had washing machines last up to 15 years. Needless to say, they werent Whirlpools. I really would like to have it replaced. I dont think its fair to me that I should have to wait for a repairman to come out and tell me he doesnt have the part and has to come back. I did take out the extended warranty, which cost approximately $150.00 and that should not have to be.

Ever since I purchased your washing machine, it has sounded like a diesel truck or cement mixer. You cant hear anything over the noise anywhere in the house.Have had two repairmen out to look at it and they say, Thats normal. I have a friend who has the same machine and it doesnt make noise like this one. I will never buy another Whirlpool product again and hope this blows up before the warranty expires. Also the tub is falling apart. What a piece of ** this machine is. You should be ashamed to put trash like that on the market.

I love the look and performance of my Whirlpool Dishwasher. It could be a bit quieter, but overall I have no complaints. My washer was already installed in my home when I purchased it and I must say, it helps when the family gets together and you don't feel like washing the dishes. The dual chamber pod holder is great if you need to use and the heat function works wonderful. I don't have the problem of the left over water that a lot of dishwashers leave behind and no spots!

I have been complaining since 2 months after I bought the Whirlpool Cabrio washer. It is the most expensive piece of junk I have ever bought. There is never enough water to thoroughly wash clothes. The clothes always tangle up. The UL comes on all the time because it is unleveled and clothes were so knotted up that I can’t get them out of the washing machine. I keep calling and complaining, but all I get from Whirlpool is that I need to sort my clothes better and not wash all pants together because the legs will get tangled. So, do I wash some of my dark paints with towels just to keep them from tangling up? I don’t think so. I paid $750.00 for this piece of **. It should wash a mink coat for that price. I keep checking websites in hopes that there is a recall on this thing. For sure, though, I will never buy another Whirlpool product after this purchase.

Less than 2 years after we purchased our whirlpool dishwasher, the rack started to rust. Now the tines are so soft they fall off. The last time we bought a dishwasher the Same thing happened, but after 15 years! They dont even have an option for that to be under warranty so it tells me they dont stand by their product. I will never buy whirlpool again.

Whirlpool side by side model WR5571CIDM. Unit rattles EVERY time refrigerator is opened or closed + plus every hour or so spontaneously. Rattle seems to come from the water filter area. Whirlpool serviceman says its normal for this model and calls to Whirlpool customer service say just live with it. Hard to believe Whirlpool considers this acceptable performance in a new model.

Microwave has melted a hole on the inside rectangular plastic cover. Model number is on recall list but not serial number. Opened microwave to find melted plastic on my popcorn bag that was dripping from the plastic up top. I will replace microwave but not with a Whirlpool again.

I chose based on the current ratings of the machines. They look nice and they can handle large loads. I think EPA has changed wash machines to be back into the 1920s. I put my clothes in and there is no agitator in the center. My clothes come out twisted tightly into little round circles or balls, not much water but now it takes over an hour to wash my clothes. So we are conserving water but using more power, I also have to iron sheets and clothes because they are so twisted and wrinkled. I used to stick my clothes into the washer, select a cycle and go on my way and now I have to answer 5 other selection options, if I dont hold the button in long enough it just turns off.Have we all lost our minds, I think this is going backwards not forwards. I have talked to other women and they agree with me, we HATE these new washer and dryers. The dryer is a little better but not much. Also the tops are concave so your laundry basket falls off, and you cant put your soap on the dryer which is where I am used to having it. Now I have to clean my washer every 30 cycles, iron and it takes all day to do the laundry, yes and they call this progress, really!!! I purchased the Whirlpool Cabrio W10607 425A- SP and dryers Whirlpool W10680129C-SP, these are full size and have the steam options on them and are side by sides.

My husband and I, purchased this washer on November last year, I used twice before and I noticed that the clothes felt hot, but the cycle was COLD water. Now use it again until June 2015. In every cycle the clothes were hot, I started calling to get an appointment in June at the 1800-253-1301, but the system was down twice. Then in July then again the system was down, then August 10, system was down. I did not wait more and called back the next day, August 11, got appointment for the 20. A technician came, he told me that the hoses was switched, but I know the hoses was installed correctly, my husband was here at the installation. He knows the proper installation of the washers.

We bought a gas hot water heater from Lowes on Dec. 31, 2010. In July 2011, there was no hot water. After much yelling and headaches, Whirlpool agreed to send out a technician to look at it, since I refuse to go in the attic and I will not work on gas appliances. After 7 days with no hot water, they replaced a valve that failed, they said, because our attic was too hot. The old unit never complained. Eight months later out, the unit went again (and we had an attic fan put in). This time, Whirlpool sent out a local plumber (and I paid for the call) though we had a warranty and extended plan with Lowes?! This time I was told no problem it was too windy and it blew out the pilot. Its funny we never noticed the attic being windy even during the hurricanes. Four to 5 months later, well, you guessed it but this time my husband just re-lit it. Then the next time, 5 months later, my brother-in-law did it. That was August to September 2012. See, this morning, there is no hot water. I had to fight with Lowes since we have the 5-year extended plan. I cannot get anyone to explain why it makes sense to them that a 2 1/2 year old hot water heater has to be re-lit every 4-6 months. Then I went online. Now I know why Lowes and Whirlpool are ignoring the issue. So, anyone know a good lawyer or what are they doing to get satisfaction?

Model # WRF990SLAM00 Ser# K23919328 - It should be possible to rate this piece of junk zero stars!! Purchased on Feb 2013, it is driving me and my wife insane. It is noisy compressor wise all the time (Our kitchen and living room in the townhouse are one room). The problems started after the hurricane in 2016 killed our power for three days. I had to shut the refrigerator down to manually defrost the freezer section because the fan on the fan-coil was hitting a huge accumulation of ice. Then the weird blackouts started approx once per month where the panel light as well as the interior lights went on and off every minute with that dreadful BEEP. This went on for over 24 hrs and made living in the same room HELL. The beep and three clicks happen every minute and the cooling is none. Whirlpool service came ($80.00) just to look at it and will come back with the rest of the bill which probably will be astronomical. I feel cheated big time!! Minute and the cooling has worsened big time. Whirlpool service came ($ 80.00) just to look at it and stated it needs a new computer board as well as a new front panel on the left door.

Have a warranty with them to get reimbursed for repairs for a year. Have had to use it twice now for the same part. Customer service told me itd take two weeks to get a certified repairman of their choosing to be reimbursed. Two weeks to go without a fridge is their solution and they have no other repairmen working. So I ask to speak to a supervisor and the representative tells me she wont transfer me out because thats the way it is. Paid out of pocket to get it fixed immediately instead of waiting.

Purchased Whirlpool front load washer 2010. Had it repaired 2013. Paid $599 for washer & $648 for the repair. Mailed copy of sales and repair to Whirlpool customer service. Received call from customer service and was told to have a nice day.

I purchased a Whirlpool gas stove model #WFG540H0AH from Sears in March 2103. Since that time, the oven has repeatedly broken. After two major repairs, the repair company said the fas venue (?) suspect board was defective and needed to be replaced by the manufacturer. After 3 weeks of back and forth calls with Whirlpool customer service, the only solution they provided was for me to purchase a new stove at a discount with no compensation for installation, the gas connection kit, or haul-away of the old appliance. The original stove cost me $1100 including the installation, haul-away and taxes. The replacement option would have cost me $800 and still did not included haul-away, the gas installation kit, or taxes. Hardly an affordable solution. Whirlpool at no time addressed that a part on the stove was deemed defective.

Just purchased Whirlpool top load large capacity washing machine with no agitator at Lowe’s three months ago. I sit at the kitchen table in my freshly washed exercise clothes and smell body odor. There were six exercise items in the load and supposedly enough soap. The load washed for 45 minutes last evening. Yard work clothes washed yesterday are not clean. I had to remove grass from the bottom of the tub. When I iron my smocks for work, since I work with animals, I pick pet hair off of them as I iron. Judging from other reviews, this torture won’t last long, before I need to replace this piece of junk. My last washer lasted 20 years. If it didnt leak water, it would still be running. Thanks Whirlpool, I guess the joke is on me!

Everything I buy from this company breaks all the time. I purchased these brands hoping they were good but apparently not. Always have to get them serviced. Lately they did an exchange on my fridge. Hope it helps because after thousands of dollars of food in the garbage it better work. And the washer thought, Oh Im paying more. It will be good. At this point will cost me less to buy from another company. Buyers beware. Cause the company cant do nothing good for me so dont buy from them.

Had one double wall oven lasted 15 years with just about no problems until the control panel broke and could not be fixed. Bought another just like it and it is having problems after 6 months. Light wont work. Turn on from the control panel and the time does not work.

Ive had this microwave for about a year and a half. Like some others I get the door sign frequently. I open the door and cant turn it on until the light goes on, which can take a minute to two. I have NEVER had problems with any microwave other than this one. I had a problem with the Whirlpool refrigerator too, which was fortunately still under warranty. I bought the fridge, oven and microwave as a deal. Trust me, there is no deal here. I will never buy this brand again. Lesson learned. Given other reviews, I might just buy another brand of microwave. Worth not having the hassle.

Have an old Estate by Whirlpool, still going, no problems, washes well. I can control the wash by adding more water, stopping it and restarting it. There is nothing like the old washing machines. I have seen and used the latest and greatest, but they cannot compete.

Bought a Whirlpool refrigerator December 2011, it is now 3 yrs. old, keeps shutting itself off. There is nothing under the troubleshooting area of the instructions for this. I called Whirlpool, they said I have to pay a tech to come here and troubleshoot. The warranty is 1 years, so after paying over 1k for an appliance, that gets you 1 year! I try to support American made, but no more Whirlpools here! I have all Whirlpool appliances, but Im guessing they wont last either. Very disappointed in the lack of customer service.

I have a similar problem with my stainless steel Whirlpool bottom freezer refrigerator, model EB9FVHRWS01, purchased in May 2011 from Sears Canada. Exactly a year later, right after the warranty expired, I started getting ice forming on the floor under the bottom freezer. I have been cleaning it out on a weekly basis for the past just over a year. If I dont clean it out, then water seeps out onto the floor. I purchased an extended warranty for my new stove but didnt for my fridge.A co-worker had the exact same problem, with ice forming on the bottom freezer exactly a year later. He purchased the extended warranty and had the Sears repairman come in and replace a $50 part (box in back) ($150 labour). The repairman said this is a manufacturers defect in these fridges and theyve had many such cases. Apparently, the box in the back freezes up and water cant drain to where its supposed to go to be evaporated so it drips to the bottom of the freezer. I contacted Whirlpool and inquired, and they said there was no defect or noted problems with my model. Now Im contemplating whether or not I should spend the $200 and get the defective part replaced. Sigh.

This is a portable dishwasher with a butcher block top. Great to use as a rolling island countertop. The capacity is huge, fitting large pasta pots and dutch ovens with ease along with dish plates. Love the water miser setting and the no heat dry to protect delicate material like china dishware.

My Whirlpool Cabro washer does not get clothes clean. When I contacted the manufacturer, I was told that it is water saving. What kind of water-saving is it if it does not clean my clothes. I would think cleaning clothes require water. If this feature renders the product ineffective, this product should not be in the market.

Bought on 9/11/2014 and installed by Lowes installers on the 15th. It quit heating two days later. Called Lowes and they said I would have to call Whirlpool. I did. WP had me metering with a multi-meter until found OTC button was tripped. Then they suggested I troubleshoot the elements and sent me a video. I called Lowes and they said they would replace. Later they called back and said WP would not give them a RA number and for me to call them. I did and the rep after much arguing directed me to call their factory authorized service, A & E. I did and they said it would be 33 days before they could come out. I hung up and called Lowes who called back later and wanted me to call WP again. This time they said they did not have a repair service close enough to come, but I could try buying the lower heating element and replacing it to see if that worked. I said no, the heater was brand new and they needed to fix it. Their next solution was have me contact a local plumber and arrange to troubleshoot, me pay the plumber and then send them the bill. They would reimburse me up to $100.00. Not acceptable and now the button has to be reset every few hours and the water gets scalding hot while it is heating. I called Lowes and they said they would get back to me, but I have little hope of a resolution. Product number is ** SN is ** Model is E2F50HD045V. Bought at Lowes, Lindale, TX.

I bought a 40-gallon hot water heater in November 2007. First problem I had with it was in 2009 when the pilot wouldnt stay lit. They sent me a requisition number to take to Lowe’s to pick up the part (igniter) and gave me a service number to give to the plumber to fix it. Plumber actually told me these heaters were junk and this wasnt the last problem Id have. Last Sunday (January 2012)--here we go again. Pilot went out and wont stay lit. Whirlpool is telling me its because I have a draft. Yeppers, that must be it because after they had me (arthritic 53-year old) and my disabled husband performing circus acts trying to relight it, then it was the filter on the bottom, then it was a draft. Last time I tried to light, which really someone as blind and disabled as me shouldnt be doing anyway, I about blew up. I hate getting ** by big corps. I filed a complaint with state Attorney General. If that doesnt work, hell, I think Ill take both Whirlpool and Lowe’s to small claims court. What do I have to lose? $35? Their fancy-schmancy lawyers will probably charge them a couple grand for their efforts. Im sick and tired of getting the short end of the stick. Since when is a hot water tank supposed to last a mere 4 years? Oh, by the way, Whirlpool says it’s all on me now--well see about that. First of all, both of these chumps just lost a customer and I Facebooked by friends about this pleasant experience plus included a link to this page. Consequences are all mine, I guess. Its pretty swell bathing in a sink full of water that you heated on the stove. I dont have any money because Im too busy giving it all to big insurance and big pharma right now. What a country!

I am a Licensed Plumber in Oklahoma, have been for 25 years. Our company will no longer work on Whirlpool water heaters, heres why. I diagnosed a water heater that the pilot would not stay lit, the thermocouple was bad. Whirlpool Tech Support told me to go to Lowes and buy the parts and send them the receipt and they would reimburse me. The customer was furious that I charged them for the part and I told them when I got reimbursed, I would send them the money. Well, I not only never got any money from Whirlpool but I never got paid from the homeowner who was mad at me and I didn’t even sell it to them. Beware, buy Rheem.

Oftentimes when we take out the dark loads there is a white line left. It appears to be detergent that does not go into suspension. We are using HD. Just lately we switch to liquid. Question in our minds is if it does not move the water enough to put the detergent in suspension, how in the world is it even cleaning? I do not see the turnover of the clothes. Where is the quality control with this?

Originally installed early 2007, the very expensive unit went crazy after about 14 months, with random beeping noises, and non-response to keyboard entry. Sometimes unplugging the unit worked. When unplugging no longer worked, the unit was repaired by replacing the keyboard logic boards only to fail again the same way.about a year later. It appeared the heat or steam from the cooktop below the microwave was causing the failures, so we became careful to ensure the fan was on. Last week, after boiling some water, the unit failed again, with error code F2H2, the keyboard error. Didnt Whirlpool expect the microwave to survive heat or steam from the stove/cooktop below? Overall, the unit is great when it works. Unfortunately due to the large size of the 2 cu ft unit, only an identical unit will fit. Im skeptical of replacing my broken unit with another Whirlpool Velos unless this keyboard problem has been fixed in new units. Anybody know if Whirlpool has fixed this problem?

Purchased double range ovens. Enamel is flaking off within 2 years. Whirlpool denies defect. They wont replace it. Any other folks with similar problems? What can I do to have it replaced? I remember the old ovens and how the enamel just stayed and stayed and stayed. Never a rust or flaking issue in those old time models. Any expertise on how the enameling process may be compromised in the newer manufacturing process (cutting corners or costs). Any options for a class action here if a commonly experienced occurrence? If similar experience drops comments/review below as a one liner - just state enamel defect. That way can figure out the number of folks with issues. Id like to take action if given the opportunity, and more so if this is a common occurrence. Lawyers are costly for one-off complaints, but there is power in numbers (think United Airlines).

I bought a Whirlpool washing machine on 16 Feb 2011. I started having problems with it in June. It was making very loud noises when it was agitating and the clothes were still wet after the spin cycle. I called Nebraska Furniture Mart where I purchased it and they said that after 30 days, I had to call the manufacturer. I called Whirlpool and they sent A&E out to fix it. The technician that came out spent an hour trying to figure out what was wrong with it. When he was gone, I was left with two inches of water on my washroom floor and I had to pull the washer and dryer out myself to wipe it up. He ordered a part that came the next week and a different technician came out to put it in. After looking at the washer, the second technician said that the first technician diagnosed it wrong and he ordered a new transmission for it. About a week later, the transmission arrived at my house and a third technician came to install it. The washer worked for a few days and started acting up again and leaking water. I once again called Whirlpool and they sent yet another technician out. I told Whirlpool that I had lost faith in A&E so they sent All Appliances out. The technician from All Appliances said that it needed a transmission and he would have to order it in. A few days later, he came back to install it. It worked for a few loads. The leaking had stopped but now, it does not spin out the clothes. To make matters worse, it now releases the Downy at the wrong time and I now have blue spots all over my clothes. I have made repeated calls to Whirlpool and talked to two different managers. I asked the first manager for her direct number so I wouldnt have to go through the whole explanation again if I needed to call back. But she gave me her number without her 4-digit extension so, there was no way of finding her again. When I talked to the second manager (by this time, I have lost my patience), I told him my whole story and I told him that Whirlpool has spent $1,000.00 between parts and technician service on a $460.00 machine and it still doesnt work. It is a lemon and I deserve a voucher for the full price to purchase something different.After one and a half hours on the phone, Lukas informed me that the only thing he could do was to send yet another technician to my home. I have lost all faith in Whirlpool and I believe that they do not stand behind their product. They only push you until the warranty has expired! I will never buy another Whirlpool appliance again!

We bought our washer about 3 years ago brand new from Lowes. Like others, I have had problems with holes in clothing and spots that looked like grease. It worked well up until recently when we noticed some brown splatters on the floor. Shortly after it made a loud noise like a plane taking off and the load would become unbalanced. We researched and found many people were having issues with the bearings going bad. My husband was going to order parts to fix it but you have to have a special tool that is expensive to buy... It was going to be almost $200 to repair ourselves! He called a washing machine repair man and he said he doesnt even touch them because the repair wont last. I guess were going to be better off buying a new washer. There really needs to be a recall on this product!!!