I brought a Whirlpool refrigerator on 2/15/2020, French doors. Bottom freezer. I have had issues with the bottom freezer from day 1!! Ive had gaps in the gasket seal and air was coming from the freezer. This happened 3x. Now there is a build up of frost and ice. STAY AWAY!! Ive never had any issues with Whirlpool until I purchased this updated refrigerator. I should have stuck with my regular top freezer refrigerator. No issues!!

I purchased the Cabrio washer and dryer and paid for the extended warranty from Lowes about 5 years ago. After about a year, the washer had problems with excessive vibration and noise. Under Lowes warranty, a repairman came and adjusted the level. He came out several more times and made other adjustments, replaced the drum, then bearings and raised the level again. He said he could not declare the washer a lemon, even though it was because they were told this was taboo. They were instructed to do whatever they could to keep the washer going throughout the life of the warranty. Now the washer stops mid-cycle and an fl or f1 error code appears on the control board. I contacted Customer Service who said I can purchase another extended warranty for over $300 or pay their repairman for the visit including parts and labor. What I paid for the extended warranty and to purchase a new one would pay for a new washer.

This dishwasher is so far advanced from what came with our new home 18 years ago. It is absolutely the quietest machine. You have to look at the light display to know if it is even running. Its a well thought out unit with the exception of the silverware accommodation. They used a flat low-profile basket attached to the inside of the door. Not accommodating enough space wise. Solved by augmenting the more stars compartmentalized basket that came with the old dishwasher. Would recommend and purchase again in a heartbeat!

Bought a French door whirlpool gold, wanted a good long lasting fridge. Bought in late 2011. After having it a couple of weeks we noticed the ice maker would take days to make ice. So we called to have it looked at. The repairman said if it is slow, switch it to fast ice. It made ice even slower, but the repair company said if it is making ice, and he comes out, we would be charged. So we lived with it. In 2014 it stopped making ice at all. We called they sent someone out and said it was a control board. They had to order it, and came back a week later to put it in. They left and said we would have ice soon. Never did!!!So we call again, they come out and said no power to ice maker. He called Whirlpool and they said wires in the freezer door were worn and broke. Well the door is non-serviceable and the cost of the door will exceed the price of the fridge! What kind of crap is that!! Long story short I will never buy another whirlpool again, and when I hear of someone buying new appliances I warn them to stay away from whirlpool!!! Run!!!

The Cabrio washing machine I was told by salesman best made so I spent big $$, makes sense right?! Wrong! During spin cycles sounds like jet plane taking off, was told barrings or drive shaft is at fault cause water seeping inside, causing rust, Whirlpool didn’t seal it or designed it to ensure no seepage. Never again Whirlpool. I’m done with your ineptitude, Type: 580. mod. WTW6500WW1. Set.# CY4970595.

The appliances in my home range from a Kitchen Aid double wall oven, a DCS single wall oven (I have 2 Kitchens), 2 Kenmore dishwashers, a Fisher and Paykel refrigerator and 2 DCS counter-top stoves (all top of the line). No problems they are great appliances. On Dec.22, I bought a Whirlpool Duet. For 6 months, constant repairs and rebuilds were needed; new computer panels, pumps and new drums. They cant fix it. We have tried everything to get the Whirlpool Factory to fix it or replace it. So far, I have spent twice the original cost to fix the machine (but to no avail) and now you want me to spend another $500-$600 to try to fix it again? No more!

Have a warranty with them to get reimbursed for repairs for a year. Have had to use it twice now for the same part. Customer service told me itd take two weeks to get a certified repairman of their choosing to be reimbursed. Two weeks to go without a fridge is their solution and they have no other repairmen working. So I ask to speak to a supervisor and the representative tells me she wont transfer me out because thats the way it is. Paid out of pocket to get it fixed immediately instead of waiting.

Purchased Whirlpool fridge in December of 2013. I have had repairmen at my home over 10 times for repairs after warranty expired in December of 2014. Purchased extended warranty and still have to wait over a week for repairs through local Whirlpool service tech. Ice maker has been problematic from the start. Either it makes a bucket in 3 days time or it makes none. I will not buy another.

We had our microwave and stove delivered in October, 2015. We had 4 deliveries of the microwave. The first two were damaged, the third needed a new fan motor and the door was not straight. They wanted to send parts to fix but we could not see spending all that money for a brand new microwave to have parts put in. I complained a lot to both Whirlpool who would not replace it and ABC Warehouse who finally agreed to replace it with a brand new one. The 4th is good. (so far).Our stove has a flaw in the glass top, the drawer doesnt close properly, and there is a piece of metal sticking out from the lower right side of the oven door. ABC says they cannot do anything about it and Whirlpool says it is under a parts warranty so it has to be repaired. I even spoke to supervisor Kimberly at Whirlpool. Got same answer. We are very angry and disappointed. As I told the Kimberly, Whirlpool got every penny they asked for. We paid for brand new in perfect condition and got a stove that needs fixing. We will never recommend Whirlpool as a Company for appliances and based on all the negative reviews Ive read, neither will a lot of other people.

After insisting to my husband that I wanted an HE washer with a large capacity so I could wash comforters and such and be ready for a house full of grandkids and visitors (we recently moved and had to leave my washer and dryer in the old house); I have been very disappointed with the washer. It leaves lint residue all over my clothes! Some of them I just cant get off. I live in Colorado and the sun shines almost everyday! I love to hang my clothes outside to dry and get brightened by the sun. Being a mile high makes the clothes even brighter I think!Anyways... back to washer... I have been doing laundry for 40 years. I have 4 grown children and know how to sort, etc... When I wash my darks, the lint that ends up on the shirts and pants... its just ridiculous! I end up scraping it off for about 25 minutes before I can hang them up to dry. On some of the clothes, there are marks where all the lint was and has stayed! Ive tried using less detergent, less fabric softener and always use the extra rinse. Tried setting it on the lowest spin cycle and the highest... Nothing helps. How do I tell my husband I would like to get rid of this and get an good old fashioned washer? I was a maniac for two months doing research and making a great cause to buy these machines!It seems to be a little better if I dry the clothes in the dryer, as the lint is pulled off somewhat, but the marks remain. If anyone has had the same experience and knows what Im doing wrong, or has a solution (other than going back to the basic machine) I would appreciate it so much. Disappointed in Denver.

Ice maker will freeze up every couple of week. I cleaned it all out last Saturday and today, Friday, it was frozen up again.

Purchased new Whirlpool 2-door, side by side refrigerator from Standards store in December 2010 for close to TT$10,000. For 2-3 years, it made a very loud noise. Each time it cut off that disturbed my peace and quiet. I complained, to no avail. In early 2015 or thereabouts I began experiencing severe warming problems in the non-freezer compartment and, since that time, I have suffered large losses from spoilage. The warming coincides with over-freezing (icicles, thick frost formation and whirling, dense cold air) in the freezer compartment and icing up of the vents in the non-freezer section. Moreover, the cool air flows from the top vent only when the freezer door is left open. Since that time Ive only been able to marginally cool the non-freezer section by unplugging for up to an entire day, at least once per week. I believe this is a manufacturing flaw rendering the non-freezer section not fit for its purpose although it manifested itself sometime after purchase. My prior experience with another brand has been totally different (13 years and still working). It is totally frustrating. It is also unsafe since spoilage is sometimes difficult to detect. Here, we have to deal with the seller and that is often a hopeless situation, particularly outside of the warranty, as has been my experience with another household appliance. Ive been advised by independent technicians who reportedly have encountered this problem that the solution lies in boring a hole connecting the two compartments which then enables efficient cooling of the non-freezer compartment. Quite frankly, I would like to have the refrigerator replaced despite the fact that it is outside of the warranty.

I bought Whirlpool water heater model #FG1H5040T3NOV about 5 years ago. Burner assembly was replaced two years ago and now, thermocouple was replaced yesterday.

Let me start out by saying that I had a Whirlpool washer that lasted me for over 25 years and done a great job of washing my heavily soiled clothes. One day it refused to run and I tried to get parts for it but it had become obsolete and no parts were to be found for it, so I had to buy a new washer. I chose whirlpool again and let me say that it was a huge mistake. This model is a low water, high efficiency, top loading machine. It has nubs in the bottom that agitate to clean the clothes. The first time that I used the machine, I found that I had made a mistake purchasing this machine. It does not clean the clothes and there is NOTHING efficient about this machine. I have to run the washer twice to clean my clothes and they are still not clean. It leaves soap in the clothes and does not rinse them clean of the soap. What it does very well is extract water from the clothes during the spin cycle. This washer really turns up the high RPM`s on spin cycle. It has ripped apart several of my shirts during spin cycle. Whirlpool really failed badly on this machine. I see clearly now that Whirlpool is not the company that they used to be back in the 1980`s. I still have the whirlpool dryer that I bought back in the 1980`s and it still works very well. To end this story, I loaded up this NEW WASHER in the back of my truck and took it to the scrap yard and I asked them to destroy it in front of my eyes. I wished that I had recorded the destruction of this piece of JUNK and posted it on YouTube for the world to see. I got over $450.00 of pleasure watching the crane operator completely destroy this pile of crap. GREAT JOB WHIRLPOOL … YOU HAVE LOST A CUSTOMER FOREVER. I WILL NEVER BUY ANY OF YOUR PRODUCTS FOR THE REST OF MY LIFE and will advise others not to buy Whirlpool products as well. I am a male, 62 years old and work hard for my ill spent money on your JUNK. Life is always a trial, live and learn the hard way. Warning to all consumers. Do not buy Whirlpool products ever!!!! Whirlpool can K.M.A!!!!

I have a 3 1/2 year old 9400WFW WP washer with a 70 error code. After viewing complaints on various websites, it appears this is a large scale problem with Whirlpool Duet owners. I just got off the phone with WP customer service and explained how many complaints are out there for F70 code error, yet they do not have a recall on this part!How can this be justified? This is a non-mechanical part of the washing machine. The life expectancy should be more than 3 years.My washer is not overused as there are only 2 people in the household. I do not want to pay the cost to repair this. I think WP should issue a part recall on this model. Does anyone know how to find out how many replacement CCU or CPUs have been purchased in relation to the number of 9400 WFW sold or if there may be a chance that WP needs to reconsider a recall?

Purchased on 04-26, professionally installed on 04-29 into a clean, large, well-ventilated area within the garage. Has turned itself off every day since then. Flashes code 10, screen is dirty... Pull the burner and the screen is clean. Called Whirlpool. They tell me to clean it again, so I do. This goes on for weeks... I can now pull the screen and clean it with my eyes closed. I get up a half hour early every morning to complete my water heater re-lighting procedure so my family can take a warm shower!!! Whirlpool gives me a phone number to a repair company. They tell me the repair person will have parts on the truck. I wait four days, guy comes out and says, You need a control valve.... did they send it to you? So I had to call Whirlpool back and order the valve... three more days... Very next day after repair, the thing shuts itself off again! I call Whirlpool and they try and push me off to the repair company, saying they are now responsible for the repair, but in the same sentence the tech says the heater needs a burner assembly. Okay, so you know it needs a burner assembly, but you ask me to contact the repair company to come out and fix it knowing they DO NOT have the parts on the truck? Only after I change my tone and raise my voice does she offer to send the part ahead of the repair appointment! In my opinion, Whirlpool has reached the top of a list shared by other mega companies like Bank of America and Time Warner Cable... Too bad the accolade is for the worst product and customer service. DO NOT BUY Whirlpool.

I am making my last payment on this junk ** washer and I cant wait to leave this one at the curb! Like the other reviewers...this machine leaves white deodorant on dark shirts, sheet sets either constantly off balance or parts of them still dry after wash cycle is finished! I changed detergents several times thinking that was the issue...but the bottom line is the sell of having no agitator and water saving features leave you with dirty clothes and off balance crazy shaking nonsense! DO NOT BUY THIS MACHINE!

I purchased a Whirlpool washer in 2005. After the extended warranty expired, our washer broke. The Whirlpool manufacturer did not have parts in stock. It’s on backorder, so what does that tell you? So we have had to wait for over a month for the repair shop to receive parts from Whirlpool’s manufacturer. Service is very slow and the quality of product is very poor. After five weeks and no repair parts, we are going to have to purchase a new washer since we do not have our washing machine repaired yet. I promise to never purchase a Whirlpool product again.

Today I had the unfortunate experience to have to deal with Whirlpool customer service and claims. I WILL NEVER BUY ANOTHER WHIRLPOOL PRODUCT again! My refrigerator, that was purchased in 2013, has a door misalignment problem. It is a known problem with Whirlpool (service pointer W107317828). My refrigerator serial number and model number are affected. Because I am outside the one year warranty, Whirlpool refuses to provide service that is required to fix this known issue with my model/serial number. After having to talk to four supervisors the only resolution that was given was that they would cover the cost of the 7/16 hex nut ($4.33). Dont get me wrong I do appreciate the offer.The two supervisors that were below her assured me that no one can do anything to assist me further. The attitude of the second and third supervisor was pathetic. After over a hour on the phone I was so disappointed that I could not take it further. The cost that we are talking about that I am asking them to pay is $154.28. I am very disappointed. They say they stand by their product. To me standing by your product means that you will fix or replace any known issue. $154.28. I hope it is worth it to you Whirlpool. You lost a long time customer.

I bought a top of the line Whirlpool dryer that cost me over $1,000. Havent had it for a month and it requires a service call. Have to wait two weeks for service! Totally unacceptable. The dryer is JUNK and now I am stuck with it. Horrible company. Bought from Home Depot.

We purchased our Duet in July 2010. It worked great until two weeks ago when the washer sounded like a 40-year-old washer. The bearing sounds like an extremely high-pitched “wrr”. We can hear it in the back of the house. I looked online to get parts and noticed that you cannot replace the bearing. You must replace the entire rear drum ($358.00). This does not include the labor. I talked with a technician, and they said the whole drum must be removed, not a one-man job, and to take the whole thing apart. Now, theres no price for installation. Lets go low ($200.00). Probably more. I cannot get a price nailed down without a visit. Now add those together ($558.00), I could put almost $600.00 into a washer that this could happen to in another 2 years. Wow.We had a washer that lasted us 15 years without any parts. Is there anything that you can do to help me? This is totally outrageous. Please help. Thank you. This was part of my chat to Whirlpool. Whirlpools response was I understand your problem but cannot help you. It is out of warranty. No help, no discount, nothing. I will and have all my friends never to purchase Whirlpool. This is from a so-called American company. Im very disappointed.

Im on Whirlpool Cabrio washer top number 4. Well over $300.00 each, and washer doesnt work with a broken top. I sent a letter to Whirlpool telling them, NEVER again Whirlpool and my reason is the 4th top in 6 years. I received a form letter back... apologizing for a delay in response and, we hope you enjoy the rest of your day, lol. They dont get my level of dissatisfaction or better just dont care. Never again Whirlpool.If you search Cabrio Washer tops you can see thousands of dissatisfied customers... and still Whirlpool has the arrogance to say, occasionally failures do occur, but we can not explain. Really is your engineering that bad? A high school kid could figure out that the spring is to strong for the plastic housing and over time the plastic cracks. Really Whirlpool? A multi billion dollar company? Never again Whirlpool.

I have had this front loader for 5 or 6 years. My clothes absolutely stick, I cant stand the smell of them. I have used Affresh, the recommended cleaner 3 days in a row, multiple cycles, no improvement. I did the vinegar treatment, leave the door open etc. What is upsetting is I have read Whirlpool has been aware of the mold and mildew problems of front loaders yet continue to manufacture them. The gasket in the front enclosure pockets at least a cup of water and other gunk from the wash. A waste of money!!!

Yesterday I purchased this Whirlpool top load washer model WTW4816FW with agitator and we installed it at our vacation home and I started a small load to wash. Yikes, it made noises like a machine that is on its last legs. I knew from washing clothes for 40 years that this is NOT right. We, hubby and I waited and listened to this piece of junk to finish the cycle. Thank god I had set it for a short wash. We also videoed this contraption while it was grinding. I called Lowes and politely told them I was returning it. Thankfully they never had a problem with us bringing it back. (This must happen often.) I go back to the appliance department and decide on a Maytag. I noticed that it looked like the junk we just returned. I stood there and looked up the model number online and lo and behold there was a video of it doing exactly the same noise. It was virtually the same machine I just returned with just a name change. Needless to say we left the store washerless until I can research this further. I then found out that Whirlpool now owns Maytag. Thing is I just bought a front loader Maytag for my main home and it works good. It was a replacement for a Whirlpool without a agitator which worked well too. The YouTube videos seem to be washers with agitators doing this. I just wish I could post the video for all to hear. I guess we are all at the mercy of big companies who dont care if they make a good product as long as they can make it cheap.

Wish I had done more homework before I purchased a Cabrio washer and dryer. The washer uses so little water that I sometimes find dry spots on clothing when I take it out. How can it possibly be clean if it doesnt even get entirely wet? I now pre-rinse all of my underwear before putting it in the machine. I know the instructions say not to put in wet clothing, but if it breaks sooner, Ill get to replace it sooner with a more traditional model. I always use the lowest spin speed - anything else makes my clothes hopelessly wrinkled. I like the large tub for washing blankets and comforters. Thats about the only advantage I can think of. The dryer sensor quite often goes off after about 2 minutes if I use any setting other than the delicate or timed features. Ive had the machines for 2 years and had the dryer repaired once under the extended warranty I purchased. Very disappointing purchase.

Bought a brand new 40 gal water heater from Lowes. Installed it and it worked fine. Next day no hot water... After doing all the tests with tech support. This smart mouthed CSR explained to me how her uncle is a master plumber and she knows what shes talking about. Still couldnt tell me what was causing it to not work. Other than the reset being tripped. I have had good luck with Whirlpool products. But customer service has always been poor.

Cabrio poor design - My number one issue with Cabrio is that it is destroying blue jeans. About 7-8 pairs now. It simply rips a hole in the leg. Also, sometimes clothes arent wet, usually not clean.

My $1800 French door refrigerator is only 20 months old and the ice maker has quit working. They sent out a repair person 5 times and replaced parts three of those times. Now they are saying it is unrepairable and are refunding my contract fee of $345 and leaving me with a broken ice maker. When the problem started it was making ice just not dumping it. Now it doesnt even get water. Throughout this all, two months, I have had to constantly call them to find out our next move. They say someone will call me in 2-3 days but they never do. One of The last people I talked to said, Well you can still keep food in it. I dont feel that is reasonable considering I bought a refrigerator with the ice maker in it. I finally called Whirlpool corporate instead of the service contract people to see if anything could be done and was told someone would call me back in 2-3 business days. Well its been a week and big surprise - have not heard from anyone. It is looking like we will have to purchase yet another refrigerator in less than two years. The service people I talked to were rude and really didnt seem to want to help at all. I believed when I purchased this Whirlpool product that they were a reputable company. Sorry to say that is not the case at all. I dont know if the refrigerator is really unrepairable or if they just gave up trying to find the issue. Seems hard to believe a basically new appliance cant be repaired.

We bought this pair, the washer and dryer, not even two months ago. I have not liked it since day 1. My clothes do NOT clean well at all. I had to wash the same load THREE times and still there is dirt on them! Just regular dirt. No oil, grease stains or anything... dirt. I even went and purchased POD detergent to make sure I was using the correct amount of detergent... Came home and washed the load again... DIRTY. Customer service says theyll send out a technician, but if they find nothing wrong, itll cost me... I wish I had read the reviews before I purchase this junk! DO NOT BUY!!!!!

Cabrio washer - I have always had a Whirlpool appliances and have always been satisfied with them, but this is the worst washer ever manufactured. I bought it to wash heavy loads of jeans and it takes me all day to wash 1 load because it is always out of balance. No matter what setting I put it on I have to keep rearranging the load. Without putting up with that, the load takes 87 minutes on bulky wash. That is far too long and then you add all the time I spend rearranging it to get it to work. I think there should be a recall or at least admit you have a poor design. My son works for Whirlpool, but Im not sure I will be supporting this company again.

We bought a Whirlpool with convection oven, it is beautiful and very well designed and fully electronic. You can only control it via touchscreen Which, when the software runs into blocks, it is impossible to troubleshoot efficiently, you just have to wait until it completes its rebooting. It is very frustrating to spend hundreds of euros in a device you just cant control when it crashes. Horrible programming made for a horrible user experience. You have the feeling of not being able to use it or fix, it is like having a mobile phone or computer Which only works on what appears to be a random logic. The errors displayed on the screen are often vague and the user troubleshooting manual is just plain short. We will return it without doubt and dont recommended ever buying this device.

Inconsistent freezer and frig temperatures, with vegetables and fruits freezing in the fridge, even when temperature is properly set. Freezer control knob and vents too easily blocked. Unit is very noisy.

I purchased this Whirlpool WTW7800XW2 washer expecting it to last many years. As a senior citizen, I spent well over $700 on this model because of its large capacity and water saving feature. It has been in service for just over two years and has had limited use. Last week the glass top popped up and I notice that it broke at the hinge. This is definitely a design flaw. The washer has a lock feature and with the broken top, it is useless. I called Whirlpool and the customer service rep said she could sell me a new $250.00 lid at a 25% discount. Looking online, I found that hundreds of consumers have this same problem. Whirlpool refuses to acknowledge the defect. The customer service rep indicated that I should have bought an extended warranty. This is my last Whirlpool appliance ever!

I purchased a brand new fridge in July of 2014 (model wrf990slam00) hoping refrigeration repairs were now behind me. They were not. The ice machine did not work from day one and they knew it was defective when I called so they had someone come out to replace it. Just over a year later it is not working again and my freezer will not freeze either. They tell me I am now out of warranty and any repairs going forward will be out of pocket. Congratulations Whirlpool. You make products that last a whole year. Do not buy Whirlpool. They could care less about you or the quality of their products.

Plastic comes off drawer when you pull it out! Trim around glass cracked. Drawers cracked. My drawer literally has a hole in it! Warranty doesnt cover that! When checking reviews on amazon people all had same complaint and when they reorder product it does the same thing. This fridge was purchased less than a year ago! I purchase it from Discount Direct, a Costco outlet store!

I bought Whirlpool Dishwasher from Lowes. This is just 2 years old. Model number is WDTA50SAHZ. This is gently used Dishwasher. Suddenly it stopped working. After water fill up, dishwaher is not working. I thought whirlpool is superb brand. Now its waste brand. Do not buy whirlpool dishwasher.

Love the bottom freezer & french doors. Unit uses way less energy than older fridge. Did need a new evaporator but it was covered by a recall. Happy so far. Love having icemaker in the door so it doesnt take up freezer space.

Our 2.5 year old Whirlpool top loading clothes washer started leaking from the bottom, enough to form a sizable puddle that ran under the dryer all the way to the wall. It was still under warranty so we called the company and they recommended a repair service. Guy came couldnt really identify the exact problem but said hed order parts to stop the leak. That was 6 weeks ago. He cant get the parts despite us calling about every week to see if the parts came in. So for the last month weve been taking our clothes to a laundromat. There seems to be no end in sight to this problem. Seems stuck between Whirlpool and the repair service and were the victims. And, oh yeah we got a note that says our warranty is ending soon.

We have had this microwave 3 years. The first thing we noticed was that baked potatoes were way overdone and nothing heated up correctly when using the sensor Not a big deal - just stopped using the sensor button. Now, we keep getting the open/close door message keeps coming up. I have done all the recommended fixes with no luck. Now we need to have a repairman come out to fix it. It seems when you are paying over $300.00 for a microwave, it should last longer. If I had known it would be such a poor quality, I would have bought a less expensive one and definitely a different brand. We do not use a microwave on a daily basis, so it certainly did not crap out from overuse. I would not recommend this to anyone. Save your money or you will be spending much more on repairs.

Cabrio Washer mod# wtw6700yw1 - Washer and Dryer purchased 2011. Now washer will not complete entire wash cycle. Shut off after 3 mins lets all the water out. Now affects all levels of wash. Contact Whirlpool customer service. Sent repairman. Claims sensor board needs to be replaced. Costs $285.00 + $55.00 for labor + $79.00 service call total cost $419.00. Needless to say I declined the repair and now after reading all other complaints glad I did. This sounds like a money pit, just keep repairing and never being fix. Repairman suggested Speed Queen washer so now shopping around for new unit. Dryer so far still working.

I purchased a washer and dryer set, the Cabrio Platinum Series WTW8500BRO, about 3 years ago. I had a UL code come up a year ago and the machine was serviced and all was back to normal. Then only 9 months later it started acting up again. This time it sounds like an airplane taking off and there is a black spatter leaking from underneath, also the lid lock stopped engaging. I started to look up the error code for the lid lock and while reviewing that issue it was an easy fix, however, the noise and black spatter issue led me to tons of horrible reviews about this product. It is a bearing/tub/shaft issue that is going to cost me $500 to fix. First off I did not pay cash for this set, I rented it for 3 years and paid twice what it’s worth, around $4,000. Stupid on my part but I couldn’t afford it the other way. Weekly payments were easier. Now I am scared to fix this product because of all the reviews I’ve seen from other consumers. I haven’t had the other issues like dirty clothes, not enough water, high cycle times because they all start with a high number but after it configured the load the time shrinks, but this major issue about the bearings, they say I have to replace the entire tub assembly which is half the cost of the unit. So stupid and I cannot believe Whirlpool is getting away with this crap. Please please please inform me about any lawsuits. I will gladly participate in that. They should be held accountable for such a worthless piece of junk. Like I said I am now afraid to fix this machine because from what I’m reading, more than likely it will only last a short time.

We have put hundreds of dollars in service calls and parts on these items. I bought them because they were supposed to be good choices. NO way! I have replaced motherboard in washer, belt and sensor in dryer, the washer has had mold in it since week one. Ive tried to clean it but just keep coming back. All my clothes smell like mold and I already have lung problems! Cant afford to buy new right now. But last month my dryer started making terrible banging noise and so repairman says I need another part! I bought the part more money! Just to have it quit again! Now the barrel split! I dont think I should have to pay the money I did for this set and surely shouldnt of had to replace so many things that went wrong or put up with the sewer smell from the washer!

Everything comes out clean and it doesn’t cause items to be tangled around each other. It has a setting for every possible type of load. I especially like the option of having “deep water”. Not having a “glass” lid is a plus.

Purchase whirlpool washer model W2W4800xQ2 in Sept. 2012. Had problem with lid lock after warranty. Now lid lock does not work, takes 1/2 hour to start wash and does no spin. Called whirlpool and they will do nothing. Repair will be $200. I opt to just purchase new machine. This machine is one piece of garbage.

My Whirlpool washer Cabrio wtw5640xw0 is 2 years old. The computer board is shot, the FOES off balance. To repair would be 554.00 plus tax. I have to say this is the worst washer I have ever bought. My niece told me she just replaced hers that she got 2 years ago also. There should be a recall on this washer. Also I was told the washer and dryer should not share the same outlet.

We have had our washer just over a year when the plastic hose that fills the detergent tray began leaking. The entire assembly is plastic and poor quality. Whirlpool customer service says since it is after 1 year, that I would need to pay for the parts & service ($489). I would not recommend this machine or anything Whirlpool.

Bought this washer in May of 2019: Whirlpool - Whirlpool - 4.5 Cu. Ft. 37-Cycle High-Efficiency Front-Loading Washer with Steam and Load & Go™ XL Dispenser - Chrome Shadow. Model: WFW6620HC. SKU: 6313774. Paid over $1,000.00 for it. FIRST TIME washing our sheets, we had snags & rips. I immediately called and was referred to Whirlpool and then referred to an outside repair company. They sent a technician out who said everything was functioning properly despite having ruined 3 sets of sheets (these were not all washed at the same time & I didn’t realize they were being snagged until making the beds).I continued to use the washer - clothes were fine, but yet again, MORE sheets and now comforters RUINED!!!! I called YET AGAIN after troubleshooting the problem myself and finding that the drain holes in the drum had metal pieces sticking up causing the items to snag & rip. Another day taken off work to stay home for the repair. The repair guy comes out, the part was broken. So now I’m left once again with a faulty washing machine AND no ETA on when the new part will arrive and be installed AND having to take yet another day off work.7 sheet sets, 3 comforters, multiple shirts, & multiple bathing suits RUINED & was told there was ‘nothing they could do!’ I will NEVER EVER AGAIN purchase anything with the Whirlpool logo. It’s JUNK! Just an FYI, this was initiated in May of 2019 and it is now the middle of September 2019 with no fix updates. Who can go months without doing laundry???? Once again, poor customer service and JUNK of a product!

Whirlpool Dishwasher MOD#WDT970SAHZ0. I have to wash the dish before it goes in otherwise it doesn’t get food or anything off. It DOES NOT DRY at all. Even when I add the heat extended dry button. The normal setting takes 3 hrs & 12min to run & again, doesnt really wash & for sure doesnt dry. I have added jet dry. I called and they keep telling me it should have more jet dry! Ugh! I now have rust happening because it doesn’t dry. DO NOT BUY THIS MODEL.

I purchased this washer and at the same time had gotten a puppy, I only mention the puppy because she is the one who kept getting blamed for what was happening to my clothes. I NEVER thought that it was my washing machine that was ruining my clothing, until I finally opened the door one day and my shirt was hanging from the top of the washer opening, and suddenly it all made sense! I kept thinking that the puppy was chewing my clothes but it is actually the washer that is sucking my clothing into the opening of the washer and when it gets stuck and the rest of the garment keeps spinning, it creates a burn in the clothing. I found out the hard way that Whirlpool will just blame the consumer for not knowing how to properly follow washing instructions, or their instructions, and will not take any sort of responsibility for it being the washer itself! I wrote to them after my father passed away and I washed his sweater in the washer and it got caught in the washer and ruined it. They blamed me for it and basically said I did not follow the proper washing instructions. I have been washing clothes for over 20 years and I know how to do laundry. I have read every inch of the owners manual and NOTHING tells you that during the wash cycle, your clothes may become sucked into the opening and ruined! So I went online to see if this was happening to anyone else and I was amazed at how many people this is actually happening to! There should have been a recall on these washers and I am amazed there has not been some sort of class action lawsuit.

The washer is only a couple of years old. It does the job but its not something wonderful or great. The previous one was a Kenmore but it was built by Whirlpool. It works. Thats all I can say about it.

We paid extra for a 10 year warranty on purchase from Airport Appliances. On delivery I commented that the plastic material used throughout the fridge was of very flimsy material and wobbly. In the first week the crisper drawer joint cracked to our amazement and they had to send another one from Whirlpool. In the 14th month after the Whirlpool warranty had expired, we found the pantry drawer lid/cover shattered by the door which shut on it because of no reasonable leeway provided in its design.On calling the special warranty people they said they only covered the compressor and parts and nothing else. Called Whirlpool who quoted $85.00 for the lid, plus S&H and taxes. Now we have an eyesore every time we open the fridge when we see the taped up cracked three foot pantry drawer lid. We badly regret giving away a 25 year old perfectly working Whirlpool Workhorse Fridge and buy this newer model which we will have to live with for a quarter of a century. I am 75 years old now. Never a Whirlpool again!

My company purchased a lot of products in Whirlpool company. We thought the product is good, until the dryer machine didnt work all of a sudden. We call a customer service. After a week the maintenance came in our unit to check the dryer but he said that they need to purchase the other part of the dryer. That was happened last july. Were keep calling the customer service. We cant even count how many times we call them. But unfortunately even them they cant give us an exact date when they can fix the dryer machine. SLOW RESPONSE FROM WHIRLPOOL COMPANY!!! Shame on you guys.

Whirlpool washing machine was not a good buy at all specially after using it and seeing that over the years I had to incur high costs of maintenance. Over the months and years of buying Whirlpool front load washing machine, I had to replace motor twice, digital display twice, motherboard twice THAT TOO at a very high price every time something broke. This time the angle that supports the drum broke and Whirlpool says drum needs to be replaced. HOWEVER, after waiting a month company says DRUM IS UNAVAILABLE. Which means my machine has become absolutely useless just because Whirlpool does not have the spare. Whirlpool has a ridiculous track record with poor service and poor product quality. Manufacturing in one country and selling it in another WITHOUT SPARES is defective and poor service, totally unreliable. Wouldnt recommend Whirlpool to anyone.

I suppose the idea was good - less water. However, when you are washing clothes, water and agitation are key. Without an agitator, clothes are just spun around with water and detergent. This washing machine (WTW4950XW2) couldnt clean any dirt off clothes. Clothes go in dirty. They come out damp, wrinkled, and dirty. I got this washing machine free from my father and am thinking I got ripped off. No wonder he gave it away. Piece of junk.

We purchased our Whirlpool Duet model WFW9150WW01 13 months ago. The warranty was up at the one year mark. We chose not to purchase the extended service plan. After all, a washer should last at least five years right? Wrong! The front seal has gone bad. It is an $85 part plus shipping, plus hours of my time. So, I purchased a product that is supposed to conserve water and instead I am having to purchase a petroleum-based product (the rubber seal), as it would seem, every year or so! These companies have us snowed with the whole conservation bull! CFLs, High Effeciency, Bio Fuels, etc., its all a hoax! And it is a hoax at our expense. Does anyone just produce a good product anymore? Oh yeah, I forgot... Japan does! Our economy continues to go to hell while other countries are coming online. Get your act together, guys, before we lose everything!

Hot water heater model #0833T402747 purchased late 2008 - Several service calls had to be made to a plumber, due to this unit not working. The door assembly was shipped to me by Whirlpool. I had to pay again for the plumber to install this part. Hes been here 3-4 times since I bought the unit. Last Wednesday, May 2, 2012, no hot water again. The same plumber came out and said the door assembly had again gone bad. Whirlpool was contacted on Thursday morning and would not agree to do anything. They were given my plumbers name and number and I never heard back from them. I contacted Lowes in Acworth, GA and they agreed to replace the hot water heater. So now Im forced to pay for another install. I requested that Whirlpool pay this expense, and their representative, **, said no. I intend to sue them for all monies spent on this lemon and due to this lemon, I will never buy another Whirlpool product of any kind. I have told family and friends and theyve agreed that due to the bad product and worse customer service, they will also stay away from purchasing anything made by this company. Whirlpool certainly wont be hurt by me and me alone. But Ill make sure that anyone I run into at Lowes or anywhere else is even looking at a Whirlpool product will get an earful from me. This is the type of customer service that consumers dont have to put up with anymore. There are many resources on the internet to get the word out and I intend to spend a great deal of my time doing just that.

I called to find out if they could assist me with my dishwasher. It is 1 year and 3 weeks old. The start button will not switch on the machine. The only way they would assist me is if I would pay the full cost of repair because it is 3 weeks out of warranty! There are no other suggestions. I would have met them half way with paying half the bill but I got nothing but Im sorry and we cant help. They dont stand behind their product.

I have always liked Whirlpool products but it seems lately they are lagging in this department. My washer/dryer combo each separate I dont feel are doing the job they should be. Washer is the bigger problem. Softner dispenser not distributing the softner correctly and now I have to clean out after each use. These are about 10 years old now. Is not spinning all the water out and not at all sure if clothes are getting clean. Most of their products usually lasted much longer back a few years.

Purchased top loading Whirlpool Washer WTW5000DW0 10/12/2015 at Best Buys, first no agitator machine for us. Two weeks later I call for repair service because of the noise from tub. Explained in other reviews as earthquake or jet engines. The machine is in the garage and can be heard through the walls into the house. Repair tells this is normal for the machine and it must be our first none agitator machine.I then purchased a extended warranty policy through Whirlpool. 12/13/2016 machine no longer washing clothes. Call Whirlpool for service. Repair came out 01/17/2017 (a month later). Washer plate had to be replaced. The gear was completely shredded. Not in stock, waited 2 weeks to get repaired. Tension springs on outer tub replaced at same time. Was told the excessive grinding and bumping of the tub was not the reason for the gear shredding.06/30/2017 same problem, I set a repair date 07/01/2017 between 8:00 a.m. and 12:00 p.m. No one shows and no call. I call Whirlpool and they are sorry and set the appointment the same day for before 5:00 p.m. No one shows our calls. I call back. Already closed. I call the next day. Sets a new date 07/05/2017, 8:00 a.m. to 12:00 p.m. Same problem. I called back speak to a supervisor who says hell get to problem and find out whats wrong. Sets a new date 07/08/2017 8:00 to 12:00 p.m. 07/07/2017 I get a call after 5:00 p.m. that the repairman is not available and can we reset for 07/13/2017. I hung up and called back the next day and spoke to a supervisor I had previously spoke with. He called an outside repair company that Whirlpool uses in this area. New date 07/12/2017. Repairman shows and I explain the washer plate was loose again and I smelled metal burning. I had told my wife to continue to use the machine to wash the clothes. The repairman tells me I voided the warranty by doing this. Im standing in the garage while he has his head in the machine trying to get the washer plate out. He shuts the lid and turns the machine on wash/spin says the machine is ok. We have an exchange of words and tell him I want to see the washer plate gears. He says he cant get the plate out now and I wasnt there for him to show it to me. This continued until he forced the plate off. He called Tech Support to say I voided the warranty. He told them customer claims loud noises and banging. I asked to speak to Tech but he tells me they dont speak with the customer. I looked at the gears on the washer plate and the transmission. Both had metal shavings. He tells me he is going to do me a favor and replace both. Its supposed to take a week. Wait and see. I have asked for a replacement or money for the machine through Whirlpool. I was told there has to be at least 4 repair requests for the same problem and the repairman has to determine that there is a problem or that its a lemon. I will not recommend or purchase another Whirlpool product.

My 5-year-old Cabrio started coming up with error codes, and not draining and spinning the clothes. I called a week ago, they offered me 2 options, one being put $339 on a credit card and that would cover all parts, labor, and a 1 year extended warranty. They charged the credit card immediately for the biggest piece of crap washing machine. Someone came out 2 days later and told me he has worked on a lot of Cabrios but never one in quite that condition. I was led to believe that after charging the credit card, boxes would be arriving with parts to fix it. I called 2 days later to find out the status of when it would be repaired and they told me they already put a credit thru on the credit card because to fix it would be equal to the price of 2 brand new washing machines, and they will do nothing to honor that agreement. So I now have a piece of ** in my laundry room and takes me two days to do a load of laundry. DO NOT BUY THE CABRIO! In fact Im not going with a Whirlpool ever again!

I purchased a Whirlpool Cabrio set about 5 1/2 years ago. Almost right away the washer made a horrible banging noise when In use... I had purchased a extended warranty so I had the service man out. He replaced something but the washer never acted right. I just about 2 months ago replaced it with a normal washer costing over half of what the Cabrio cost me... and now just a few days ago the dryer followed suit and died. The repair (out of warranty) was going to cost $150.00 and that was just for the part, I had service people out twice for the dryer since it came home with me also. This set was the biggest waste of money I have sadly wasted in my lifetime, is it just that they make things badly these days or the more crap that a machine has on it the crappier it is???

I just bought this water heater on 2/12/12 and it has already started having problems. I got a self diagnosis of the gas valve needing to be replaced. I think that if this becomes an ongoing problem, whether I have a warranty or not, I’m going to trash it and go with another brand. I shouldn’t have to pay to have the gas valve replaced.

We recently purchased a refrigerator from a reputable local appliance store after months of shopping and comparing and research. As an opinion, Whirlpool seemed to set the standard for a quality appliance. Unfortunately, we failed miserably by buying this side-by-side fridge. Two unsolvable problems. First, the cold side door is extremely difficult to open. Ive tried ALL gasket lube methods and failed. Second, the stainless steel used on the front of the machine is obviously low grade that accepts magnets and is almost impossible to clean weekly without streaking. They were kind enough to provide us with their special cleaner {free} but it takes about an hour and a half to use for moderate success.The lady on the help desk listened but seemed rather cold and uninterested in the problems. At this point, we would be willing to pay the extra and go to a Kitchen Aid instead. Our advise is beware of these types of issues and get some kind of guarantee from your store when buying a WHIRLPOOL refrigerator. This is simply terrible.

We purchased the gas slide in range with gas oven. Immediately the temperature would hold a consistent heat, therefore it continually reset with a start sound (swoosh) every 5 minutes. The manual says it will do this, but clearly this is not normal. Then, the oven stopped working, showing an error message FBE0, that the cooling fan is not at high enough speeds! It sounds as though, along with hundreds of other people, we have all been ripped off! If anyone can please tell me what can be done about these defective stoves, I would appreciate it, thanks very much!

I like this refrigerator. Its a two door. I did not get an icemaker and I have plenty of freezer room. The milk will stay fresh at least for a month. I like the crispers. They keep my food fresh. It keeped the Romain lettuce very fresh on the package, it was pick 7/31/2019 and just have a fresh green Salad Sept 6, 2019. Easy to move when wanting to clean the floor.

Purchased in January of 2014: Brand new Whirlpool WOS51EC7AS01 model oven - interior bottom metal has buckled causing the enamel to crack and break off from oven bottom. I registered all my new appliances immediately for warranty. When this happened after the fourth or fifth time baking in the oven, I called Whirlpool to get a service person to look at it. First person Whirlpool scheduled to come out refused to even come out, without looking at my oven. He said he knew we did something wrong? They immediately set up a second service person, after two weeks waiting for an answer; I had to call him (twice). He said that his report and pictures sent into Whirlpool shows normal use and there is nothing wrong with our oven? So, Whirlpool will do nothing to repair the oven? We just spent almost $4,000.00 on all new Whirlpool appliances, and this is how we get treated? WOW! Never again will I ever purchase a Whirlpool product. The enamel is gone in spots from our oven floor. How long do they think that will last with no protective coating on the oven? Terrible customer service.

Four years old and only used by a 2 family home. No kids overloading it. Probably wash 3 loads a week on average. After 4 years, it has started the grease flying out of the bottom and now leaking water. My appliance repair man told me to scrap it and buy a new one. The repair and the parts are too expensive and in the end it is still junk. I realize things wont last 30 years like they used to but can I get 7 years out of a major appliance?

We purchased our first front-loader washing machine (Whirlpool Duet WFW9250WW00) just over two years ago. Since we purchased it, it has torn clothes and we have replaced the drum baffles twice (this would be the third time, but we are throwing the washer out), the drum seals twice (another place clothes can get caught). I had adjusted my washing (maybe I overfilled the washer, maybe I was using the wrong spinning speed), but every so often clothing would come out with holes or torn. The drum baffles must come loose before they come out, and clothing can get caught underneath them (I think that is where the tears occur). It has happened at least once a month and I had spent a fair amount of time trying to figure out where the clothes got caught and torn. Many people complain about bad smells from the washers (which I never had - I like the Tide with Febreeze detergent and every so often clean it with bleach or Affresh), but never torn clothing. I would really like to use a front-loading washing machine, but we are going back to the top loader - we cannot afford the clothing tears. I have seen that many people replace baffles (not many speak of clothing tears) and maybe in the future this problem will be addressed. But in the meantime, I would stay away from Whirlpool front-end washers. (GE makes some nice top loaders - and in 40 years of washing clothes and only owning two other washers, I have always thought washers to be an appliance that would last 15 years or longer with very little maintenance or trouble). I believe that I really tried to make this washing machine work out, but it got to the point where my husband did not want to wash baseball uniforms and other irreplaceable clothing in our washer.

I bought a Whirlpool Cabrio washing machine from Lowes 3 short years ago. Within the first year, it needed a new main board. Now just 2 years later, it needs another main board. It has never worked correctly. I have purchased another washer from another manufacturer and will never buy a Whirlpool product again and neither will anyone I talk with about this. Dont buy Whirlpool products!!

Bought this washer NEW 4 yrs ago. Now sounds like a freight train in the house when in use. Whirlpool customer service is absolutely USELESS!!! They do not stand behind their product and refuse to acknowledge what is a common issue. PISS POOR and will NOT give me a number to a higher up. Absolute disgrace!!!UPDATED ON 10/28/2015: This is an update to my previous review. 1st, I contacted Whirlpool who was absolutely NO help whatsoever and the person I spoke to refused to put me through to higher ups on the food chain. I was wrong in my previous review when I stated that we purchased the washer & dryer 4 yrs ago. It was purchased in January 2012. Started making noise in 2014 and has progressively turned into the sound of a freight train. I also failed to mention the stench that comes from this machine. It has also got to the point where it quits with 10 minutes to go in every wash. Whirlpool did send out a Whirlpool certified technician, which they paid for, who stated this has been a common issue with these and other models of Whirlpool Cabrio wash machines. Says in his 3 yrs with the company he has seen and diagnosed over 30 machines with basically the same issues (bearings are SHOT) and Whirlpool refuses to accept any responsibility for the defective design and that, in his opinion, they shouldve never been released. He gave me an estimate of $257.13 to repair. We decided to go ahead with the repair and technician came out only to tell me that there has been a re-work in the design of the replacement parts as Whirlpool realized they were faulty. So I now have to wait for the NEW designed replacement parts to come in as they are back ordered. WTF does that mean??? Shouldnt there be a RE-CALL and shouldnt they accept responsibility for this??? This has been, without a doubt, the most disappointment weve had with any purchase of a NEW appliance or, anything else for that matter, in our lives. After reading through some of these same complaints Im wondering if this machine is nothing, but a money pit and whats going to go wrong next. We also purchased the Cabrio dryer at the same time and have had no issues with it as of this time, but I assure you, I wait with baited breath. Their customer service department is piss poor AT BEST!! Please, stay away from ALL Whirlpool appliances in the future.

I just purchased a new Whirlpool 6th Sense hot water tank #333570. This unit is a piece of garbage. Whirlpool should be ashamed at the quality of product they make. This unit came with a bent temperature and pressure relief valve, which required a piece of copper tubing to be bent awkwardly just to remedy the situation. Also, the control box is set at 12 (most other brands are 14, which is common), forcing the gas lines to be re-piped (very expensive). This unit also is extremely noisy, runs really, really hot and is not energy-efficient at all. Shame on me for not researching this product more closely. If youre buying a new hot water tank, steer clear of Whirlpool products.

We have also had many problems with 3 year old convection oven. After about 2 months the broiler would just come on in the bake mode. I called Whirlpool about this problem and they were a bit ignorant on the matter. They said they could arrange a service call, but if they did not find the same problem mentioned that I could be charged a service call, even though it is under warranty. I denied at the time and the problem did not happen again for about another 1-1/2 years or so. In the last few months it has happened a number of times and the one time my wife leaves the room, the potpie burns up. She also lost a pan of brownies. Now we make sure that someone is in the kitchen when the oven is in use. Today the broiler comes on while pre-heating and for the 1st time we receive a message TURN OFF POWER TO RESET in which I did thru the breaker. It took forever to cool down, then she is going to try again. I also am going to contact Whirlpool and see what they have to say. Last I checked there was no recall for this model (#GFE461LVS), but there should be after reading all of the complaints or they are bound to have a lawsuit on their hands or maybe even a class action lawsuit.

My wife and I purchased the Whirlpool calypso washer and dryers and have been regretting ever purchasing a Whirlpool product. Not more than a year and a half after spending thousands of dollars on their products the troubles started. I called the company and they sent someone out to look at it for repair. He vacuumed out the lines and kept restarting it over and over and eventually it started working again and they charged a hundred dollars and something and said there most likely be more problems since they have many calls on this issue. Sure enough it started again and just kept retrying it over and over to get it to work again as well as vacuumed the lines again like he did. Now its at the point it will not work no matter what. It just keeps flashing LD and shuts down. So I did a online search for other consumers having the same problem and was shocked by the amount of the same problem with others (search this model flashing LD and you will see for yourself). When I contacted Whirlpool they played dumb and lied right thru their teeth saying they have no issues with this model and refused to do anything. I have since learned there has been court cases where the courts ruled against them saying that it was defective and had to notify consumers which they never did. Even when the repairman came out nothing was said. I have since learned that all they did was changed the name to a different model which is having the same problem (no kidding!!) and continued to rip the public off in the name of CORPORATE Greed!!!!! I advise everybody never to purchase a Whirlpool product ever again and maybe we can bankrupt them and put them out of business where they belong. All the customer service agents deserve to be unemployed and suffering after long waits on the phone and then lying straight face to the consumers. Pure evil!!!! We all have to stick together and bring these criminals down. How can they say we have no issues when a simple search of Whirlpool Calypso problems with draining and flashing LD and shutting down. There are thousands of people complaining and no action is done. Shame on these people and their souls are lost forever. Never buy a Whirlpool product and tell everybody you know to stay away! They should have their ** and/or ** cut off and have to suffer the same way the struggling consumers are after scrounging up thousands of dollars for a 200-pound metal paper weight that aint worth a damn!!!!

Weve been in our new home less than a year and a half and our brand new Whirlpool French door fridge is dead. Service is a week away. Updates to follow.

In 2011 we bought a Whirlpool Washer (WTW4950XW). We had a one year warranty. There have been problems ever since we bought it. Of course it is no longer under warranty. In the last few months we have encountered brown spots on clothing. The washer has always spent an inordinate amount of time Scanning. It does not matter how much I readjust the load. I ALWAYS must do an extra Spin and Drain. Sometimes Rinse and Drain helps...sometimes not. Sometimes the machine indicates it MIGHT be finished washing but only the clothing on the bottom of the load is damp. It does not rinse the soap out. Recently when I washed my husbands coat several times -- he had to finally hang it in the shower when he bathed to get the soap out.We had repairmen out once when we had the warranty. They said the drainage hose was wrong. We adjusted that. I called Whirlpool more than once about our problems. They said they could not help because we had no warranty. OK. One young lady said we could get a 5 year warranty for $353. For $499 we might get a machine without all the 747 dials and tweets and fewer government, EPA amenities. Whats wrong with this picture? My old washer lasted 30 years. We are very, very sorry we did not repair it. All I want is a washer that will provide me with clean clothing, towels, sheets and blankets in a timely manner. That does not seem to me to be too much to expect. I am considering a washboard! Or the shower for ALL my laundry! I am angry and frustrated. I always considered Whirlpool a good brand.

Bought a Whirlpool hot water heater from Lowes 1/08/12. In May of 2013, it would not work. I had to replace the Gas Control for around $100.00. It was 4 months off warranty! The same thing happens 3/2014. They sent me a new Gas Control Valve free and shipped it overnight. This is no fun to fix. I cannot believe that I need to flush the tank out with cider vinegar every 6 months. That is why I was told it keeps breaking.

We purchased a brand new home with a brand new Whirlpool microwave in it. It was a combo, over the range/hood vent, model WMH1162XVB-0. Every now and again, sparks fly when preparing vegetables. Three times a repairman came to our home with no results. Each time, the problem persisted, with no improvement. On the first visit, the diagnosis was that we did not know how to properly use a microwave. It was noted that they gave us operating instructions and a personal tutorial to solve the problem.On the 2nd visit, we were instructed to buy a protective cover for our bowls when using the microwave. I asked if this would solve the problem, and was told no, but at least we wouldnt see it. This time, the random sparks happened in front of the repair man. He responded that it was the high iron content in the corn and peas that would ignite the sparks. Also, he said we needed to thaw everything before putting it in the microwave. Again, our issue was listed as consumer-use error and nothing was done.On the 3rd visit, we explained that we could not use the microwave on any setting higher than 70 for risking of sparks flying. We showed him the cover we were using, and the permanent marks being left by sparks. Again, the serviceman witnessed the sparks flying, even on thawed peas and corn that simply needed to be heated. He responded that by adjusting the power, and using the cover, we were obviously learning how to work the microwave and informed us that the next service call for this issue would be at our expense. There was nothing they would do for us, as the problem was our fault, not theirs. We explained that other neighbors with the same microwaves are not having this trouble, and we felt it was simply a faulty unit. He didnt seem to agree, nor care what we felt.I have been using microwaves daily for over 20 years. Our neighbors, having the same exact model, have had no issues at all. I know this is simply a faulty unit, and feel endangered each time I use the microwave. Whats even worse is the way Whirlpool has handled our situation. Our microwave is now 4 years old, and I have learned to rely on my toaster oven. When people visit, we have to caution them on the microwave. I will never buy any Whirlpool appliance for my home again. I do not trust the quality of their products or their service.

My mother-in-law purchased a Whirlpool refrigerator in 7/2010. It broke down the first time in August then consistently after that. We have had repair people out multiple times and the issue continues. I called Whirlpool and they said since it was purchased more than a year ago, it is not their problem. You would think that in all that time they would have found a way to repair or replace it. To make matters worse, we have had to call hospice in to care for my mother-in-law, all she wants is to get ice and water out of the door.

Amongst all other items listed in these reviews (especially the tangling and twisting of clothes literally into knots), my guess is that is one way to ensure they are drier when they come out, wring them into knots... So now the pizza is slinging grease/oil all over the floor and water is leaking out from the bottom as well to make a perfect conglomeration of ** all over my tile. There is always more than one way to take care of the employees, hire sales people full of **, and technicians who know what the hell to do to fix it, with previous full of ** sales experience so consumers can buy more Whirlpool parts...

I purchased a front load washer and dryer brand new. The washer is under a 2-year warranty on all parts and labor. Since I have purchased them, the washer has had to be fixed on several occasions. I have had 10 parts replaced and had to be out a washer for a month at one given time. I have had the repair company email me all the parts and services that they have done. All I want is a new washer! I have argued with Georges Appliances on several occasions because I believe they sold me the obviously faulty washer and I dont believe that I should be responsible to have to figure it out for myself. They should be responsible to provide me a new one. They told me that I had to contact Whirlpool in order to receive a new washer. Please contact me asap.

Whirlpool Gas Range WFG540H0es - Purchased 2 months ago. After 2 weeks there was a spill. The black burner caps are powder coated. After cooling we washed it with dish detergent & a sponge. The powder coating came off. Called the company. They replaced burner caps. Last week there was a spill and it stained the burner bases which are powder coated in a silver color. We tried 409 cleaner, Windex, dish detergent with a sponge. Could NOT get the stain out started removing powder coating. Called the company they ONLY guarantee cosmetic appearance 30 days. They wanted $139.00 for a new set of burner bases. I am going to go back to Lowes & see if we can return this Whirlpool range.

I have a front load washer by Whirlpool and a motor stopped working on the drain. When I called them, they told me it would be $200.00 for the part. I dont understand why they dont stand behind there product. What can be done to make these people fix there stuff? This is there product, if they cant do it right, then find a new job!

Refrigerator is only 4 years old and must be defrosted every 2 or 3 weeks as a thick sheet of ice forms in the bottom of the freezer. Also the appliance frequently emits loud cracking noises.

My brand new Whirlpool washing machine has been nothing but trouble from the day we first used it. We are now reaching out to try to contact the warranty department. Weve tried email and phone both and are having ZERO luck even getting a human to talk to about the problems. No response. Took forever to even find what we thought was accurate contact info. Lowes doesnt stand behind it. Now Whirlpool has a crap warranty department. We were warned and should have never bought it to start with. It is a total waste of money.

I love my Whirlpool. Were a family of 3 with a pet dog. Its handle one childs work uniforms and the others sports uniforms (yuck). And then theres my work/weekend clothes. Its very reliable and it gets the job done. We have no complaints.

Just wondered if anyone else has had a problem with the paint bubbling up and peeling off their washer and/or dryer. My washer and dryer are in my laundry room off the kitchen with a heat and air vent in the room and I dont understand why my paint is doing this. They are about 5 years old and have always been in this room, never in a garage or basement. My dryer was rusting on the outside about 3 years ago and even though I bought the extended warranty, Whirlpool said it was only cosmetic and they wouldnt do anything about it. I bought them at Lowes and they were good enough to give me a new one to replace it. Both of the machines now have the paint bubbling up and peeling off and there is nothing that can be done. Anybody else have this problem and if so what can be done to repair the paint? This is my 3rd set of Whirlpool washer and dryers over the past 44 years and I will purchase another brand next time.

Looked for the best refrig we could find and it turned out to be a piece of junk! Less than 3 years old, paid 2700$, french doors bottom door freezer. It started making a lot of noise it seem to be coming from freezer. Called Whirlpool, they said to clean coils. We wanted a repair company to come out. They set an appointment for next Tuesday between 12pm and 5pm. Said ok.Was making so much noise, and no longer freezing everything so call said company. Lady was very rude, and said they would not be out on Tuesday but sometime the following week. This would not work for us so called another repair shop, said they would be out. They were here before 6pm. Found out that they have been having this problem, had same type of call already this week. Repair for this problem would be over $1100.00. No thank you! Would just as soon junk this appliance. So very sorry we wasted our money on this.

I have been using this brand for many years. My first washer lasted for 30 years..so I will stick with what I know is reliable. It is a great machine. Very simple. I dont need anything fancy. 3 different cycles to choose from.

The stove is only 5 years old. The oven would not ignite. The gas was getting through, but theres no flame. Sears repaired it and put a complete flame and ignitor piece at a cost for a part of $132.00. I feel the stove is too new to have to replace anything. I am retired, so I do not use the oven often. I have only cleaned the oven one time in five years. It is very clean. I picked this stove out and paid $900.00, because I liked the style and everything about it. I feel you should look into this, and I should not have to pay for repairs in such a short time of ownership. The repair person said this stove already had an upgrade in it. Please respond. Does the whole heating element need replacing or just the ignitor?

I am on my second Cabrio. The first one only lasted a few years, but I stayed with the Cabrio line because I didnt want to replace the dryer. That was my first mistake. The second Cabrio washer constantly leaves a white residue on dark clothing. I used an HE detergent, reduced the detergent and put the dark clothes through an extra rinse and still find residue that has to be scraped off. I called Whirlpool on Dec. 19th, 2018 to complain about this and was told there was no history reported of this kind of problem. Then I went on the ConsumerAffairs website to learn that many others have the same residue issue, among many other products. I will not ever purchase a Whirlpool machine of any kind again.

Whirlpool Dryer Model WED4815EWO and Whirlpool Washer W10682799 - I have always had great results with Whirlpool products. Both are energy efficient and save on operating costs. I purchased them three (3) months ago. The washer locks during the wash cycle. That took a little getting used to. I have always been able to rely on Whirlpool products. The top loading washer (W10682799) is energy efficient and high capacity. It regulates the water level so you dont have to worry about wasting water. The matching Dryer (WED4815EWO) has a sensor to regulate your drying time or it can be manually set. I appreciate the worry free, self-regulating functions on both the washer and the dryer.

This washer was expensive, platinum line. Clothes never smelled fresh and clean like they should. There is not enough water to cover and clean. After 4 years it started smelling dank and unpleasant even after cleaning cycle is run. Now I discover it has been leaking for quite a while. It will be 6 years old in July. The top wont stay up. This happened months ago. The part alone is 250.00 according to several sites. I just prop it up. Very displeased with this poorly constructed, expensive rip off!

We bought a washer in Sept. 2014 and it was used for 4 months before we left and went south for the winter. When we came back in May, we started hearing a loud banging noise so we notified Whirlpool since we were still under warranty. They sent a repairman and he said he needed to take the washer in so he could repair it. They have sent the part out 3 times and they said it was chipped or cracked so another would need to be sent. This has been going on for 2 months that weve been without the washer and today we checked and supposedly another part should be coming. They tell us our warranty is only for parts and labor not replacement. Help would be appreciated. Thank you.

We purchased a 50 gallon water heater in 2005. In 2008, the thermocoupling unit went out and Whirlpool sent us the replacement part and we had a plumper install the piece (at our expense, of course).Now, we are running into the exact same problem 3 years later with the pilot light not staying lit. We had a plumber come out this weekend and replace the part but unfortunately this time, its not fixing the problem. The plumber charged us $178. He said that he can replace the thermostat on the water heater but that would cost us close to $400 to replace and makes no sense to do since purchasing a new one wouldnt be much more than that. I am so frustrated with this water heater; I just want to throw it out in the middle of the street! We still have 3 years left on our warranty too. I have 2 very young daughters who need to take baths, and who also dirty up quite a bit of clothes that need to be washed in warm water. What a nightmare! Whirlpool, help us!

Pathetic pathetic service!!! Unsatisfactory service!!! First of all, I would like to tell everyone who ever reads this, that please please please never ever use any Whirlpool products, as their service sucks, their response sucks too, and zero co-operation from their people, which will make you regret to have used their products in future. Please note I registered a complaint on the whirlpool no. **.The complaint was that the washing machine used by us had issues, the power button/ on & off button had come out, and this was clearly stated while registering the complaint. I get a call from Mr. ** (Representative of shree enterprises bibwewadi, pune) and the power button issue was well informed to him as well over the phone by me. He arrived to our place without any new material, he sees the machine and interchanges the buttons, i.e. the broken power button is replaced by other button from my machine which was less used compared to the power button. I had to pay a sum of rs. 400/- for the pathetic service I received from your end.I expect a response from your side within next 4 hours, or I might have to escalate this issue!!! (Please note Whirlpool team that I had submitted the same on your website yesterday, yet I have not received any response from your side). (Whirlpool rating- 0 out of 100). Thanks. (And whoever reads this, please tell me where else can I post this review of mine so that I shall alert everyone that how bad whirlpool service is)...

Bought a Whirlpool Cabrio. Noticed it was getting really loud less than a year into owning it. Called while it was under warranty. The tech said it was fine. Within the next year and a half it got so loud, you cant hear anything else in the house while it is running. Now it is leaking from the tub seals and the bearings are going out according to two service techs I have had come look at it. They say it is more expensive to fix than the washer is even worth. This is due to the parts that would be used to fix it are the same cheap Whirlpool parts that were put in it in the first place. They both said that these are not good washers and commonly go out about a year and half to three years old. Shame on Whirlpool for making such a low quality product and not being willing to do anything about it.

Design is made so you will need a repair man to clean filter. The machine has to be taken apart to get to filter. About one hour of your time. If youre not handy its a paid repair About $250 to $300. Also the valves that control the water into the washer failed after about 5 years. An easy fix part costs about $60. All appliances are designed to fail after the purchased extended warranty expires. More features more repairs. So if you arent going to use a feature get a simpler machine. More money does not mean better machine. Or that it will last longer. The days of an appliance lasting 10 to 20 years are over.

It is a new model side by side with water and ice maker. The temperature is very uneven, inside it has surprisingly little storage room in both fridge and freezer. Very difficult to fit food in due to awkward spaces. Would not buy again or recommend.

My refrigerator is about 7 years old. Has performed great. Good use of room inside. Easy to clean. Bought only Whirlpool products for years however since the last purchase of a range a couple years ago the quality was greatly diminished. May be changing brands now.

This was the first new appliance that I had actually ever had and I purchased it in October of 2010. After four months, it started make a grinding sound. I called Whirlpool and the repair man replaced the motor. Approximately four months after that, the lid got stuck and the machine would not respond. Same routine as before, but this time the transmission was replaced. While the machine was apart, I noticed the white insulating panel from the bottom was brown in a spot and looked as if it had gotten hot. A month before the 1 year warranty expired, the washer started making an intermittent grinding sound nearly identical to the sound made when the motor went out. This time a different service company was sent out my Whirlpool and the said that nothing was wrong. Now, the machine is out of warranty and has stopped cleaning close and during the spin cycle the you can hear water running into the machine constantly. Last months water bill shows a 40% increase in water consumption when nothing has changed to incur a larger bill. Seeing all these comments makes me wonder why the heck nothing is being done to force recalls on such poor products. Consumers should be treated with a lot more respect than this. I will never recommend a Whirlpool product to anyone I meet. In fact, I will strongly discourage anyone who is contemplating buying a Whirlpool washer machine.